Ficha Tecnica Cat Cs-433e

Download as pdf or txt
Download as pdf or txt
You are on page 1of 16
At a glance
Powered by AI
The document describes different models of vibratory soil compactors from Caterpillar including specifications for the CS423E, CS433E, CP433E, 400E-Series and 300C-Series.

The models described include the CS423E, CS433E, CP433E, 400E-Series (CS54, CP54, CS56, CP56, CS64, CP64, CS74, CP74, CS76, CS76 XT, CP76), and 300C-Series (CS323C, CP323C). Specifications for each including operating weight, drum width, and engine power are provided.

Features included are an exceptional operator's station with a propel lever wrist rest, grouped control gauges, conveniently located control switches, and four heavy-duty isolation mounts to provide a smooth ride. Standard rearview mirrors and working lights are also provided.

CS423E

CS433E
CP433E
Vibratory Soil
Compactors

CS423E CS433E CP433E


Gross Power 62 kW 83 hp 75 kW 100 hp 75 kW 100 hp
Operating Weight (with ROPS/FOPS) 6745 kg 14,875 lb 6745 kg 14,875 lb 7145 kg 15,750 lb
Compaction Width 1676 mm 66" 1676 mm 66" 1676 mm 66"
Centrifugal Force
High 134 kN 30,000 lb 134 kN 30,000 lb 134 kN 30,000 lb
Low 67 kN 15,000 lb 67 kN 15,000 lb 67 kN 15,000 lb
CS423E Soil Compactor
The CS423E Soil Compactor provides high compaction performance in the most
cost-effective way. Designed for efficiency, while minimizing operating costs, the CS423E
features a Caterpillar® 3054C engine rated at 62 kW (83 hp). The CS423E will meet your
smooth drum compaction needs in the majority of applications.
Vibratory System Gradeability and Machine Control Operator’s Station
A pod-style weight housing ensures The exclusive dual pump propel system The 400E-Series Soil Compactors
peak vibratory performance and provides a separate balanced hydraulic feature exceptional operator comfort
minimal service. The pod is replaceable flow to both the rear drive axle and the and visibility. A propel lever wrist
and features bearing lubrication change front drum drive motor. This system rest, grouped control gauges and
intervals of 3 years/3000 hours. enables the operator to achieve conveniently located control switches
Page 4 unmatched gradeability and maintain enhance operator productivity and
machine control while compacting on reduce operator fatigue. Four heavy-
a grade or using the optional leveling duty isolation mounts provide a smooth
blade. Dual pumps also minimize drum ride. Standard rearview mirrors, two
and wheel spin-out in low traction front-facing and two rear-facing
conditions. working lights are provided. Machines
Page 6 with the open ROPS/FOPS platform are
surrounded by handrails and features
Productivity and reliability you can depend on. foot rests for sure footing when
working on a grade.
Durable, field-proven powertrain and vibratory systems Page 7

along with the world’s largest and most dedicated dealer


support system ensure the 400E-Series Soil Compactors
will provide maximum utilization. With exceptional
productivity and reliability, the 400E-Series Soil
Compactors provide everything you expect from a
Caterpillar machine and more!

2
CS433E and CP433E Soil Compactors
The CS433E and CP433E Soil Compactors provide maximum productivity and versatility
for both smooth and padfoot drum applications. Powered by the turbocharged, 75 kW
(100 hp) Caterpillar 3054C engine, these machines provide exceptional compaction
performance in demanding applications.
Visibility Versatility Serviceability
The one-piece sloped hood design An optional two-piece padfoot The one-piece fiberglass hood tilts
provides exceptional operator visibility conversion kit (for the CS models only) forward to allow access to the engine
to the outside edge of the rear tires and expands the application range to work and daily maintenance points. Daily
to the rear of the machine. in either cohesive or semi-cohesive check points are accessible from ground
Page 6 materials. Simple changing procedure level. Sealed-for-life bearings in the
minimizes your conversion time. articulation hitch never need to be
Cab Page 8 greased. The operator’s station tilts
The cab on the 400E-Series Soil forward to provide access to the
Compactors is engineered to provide An optional foot-controlled leveling hydraulic pumps. The engine
the operator unparalleled viewing area blade for the CS433E and CP433E lubrication change interval is 500 hours.
and comfort. Integrated, factory increases machine utilization to tackle Page 10
installed air conditioning is optional. backfilling, material knockdown and
The cab may be an option in some light dozing applications.
areas and standard in others. Consult Page 9
your dealer for specifics.
Page 8

Comfort and serviceability you deserve.


The operator’s station provides a spacious and comfortable work environment that allows
simple and productive operation. Excellent service access and long service intervals
minimize maintenance time and increase productive work time.

3
Vibratory System
The pod-style vibratory system delivers superior compactive force while offering
serviceability advantages.
Pod-style weight housing is assembled
q and sealed at the factory to ensure
cleanliness, longer bearing life and
r easier field exchange or service.

Dual amplitude works efficiently in a


wider range of applications. Selection is
controlled from the operator’s station.

Vibratory frequency of 31.9 Hz (1914


vpm) for maximum compaction results.
Optional variable frequency control
allows frequency to be better matched
to varying job conditions.

Large heavy-duty bearings for the


eccentric weight shaft designed for high
compactive forces.
w 3 year/3000 hour vibratory bearing lube
service interval reduces maintenance.
1 Pod-style Weight Housing
2 Proprietary Eccentric Weight Heavy-duty isolation mounts allow more
3 Heavy-duty Bearings
e force to be transmitted to the ground and
4 Isolation Mounts less vibration to the drum yoke.

Proprietary Eccentric Weights


Reliable dual amplitude selection and innovative design ensure precise performance.

High Amplitude Low Amplitude Positive amplitude selection is


accomplished when the steel shot is
repositioned inside the hollow eccentric
weight. Direction of weight shaft
rotation determines amplitude level.
Simplified control from the operator’s
station with a selection switch on the
operator’s console.
High reliability since there is no chance
of the high-strength spherical steel shot
wedging together. System reliability is
superior to swinging mechanical
weights and is also quieter during starts
and stops.
Long service life. No heavy weights to
slam together, no metal fragments to
contaminate the bearing lubrication
system.

4
Caterpillar 3054C Series Diesel Engine
High-tech four cylinder engine provides outstanding durability, performance, reliability and
operating economy.
The CS433E and CP433E are
turbocharged for top performance and
efficiency even at high altitudes with no
derating required up to 3000 m (9840 ft).
The CS423E is naturally aspirated.
Adjustment-free direct injection fuel
system provides individually metered
high-pressure, direct injection of fuel
for maximum efficiency.
Large engine oil cooler reduces oil
deterioration and varnishing of internal
components. Allows for 500 hour
engine oil change intervals.
Low-mounted oil pump for quicker
start-up lubrication.
Combination fuel filter and water
separator offers superior protection for
the fuel injection system.
Engine meets U.S. EPA Tier 2 and
European EU Stage II emissions control
standards worldwide.

Dual Pump Propel System


High tractive effort and gradeability for outstanding productivity and machine control in
demanding environments.
Dual propel pumps provide separate,
balanced hydraulic flow to the rear
wheel axle and the drum drive motors.
Provides high gradeability and
r increases tractive effort in loose or
poor underfoot conditions.
e
Limited slip differential provides
q balanced tractive effort and smooth
torque transfer to both rear wheels.
w Two speed ranges for versatile
operation. Low speed range for
vibratory operation and maximum
torque when climbing grades. High
speed range moves machine quickly
1 Dual Propel Pumps
2 Caterpillar 3054C Engine over longer distances.
t 3
4
Limited Slip Differential
Rear Wheel Drive Motor Flushing valves in each propel circuit
5 Drum Drive Motor help keep hydraulic oil cool and clean
for maximum system efficiency.

5
Gradeability and Machine Control
The exclusive dual pump propel system provides superior performance, machine control
and excellent grade climbing capability.
Two propel pump system has dedicated
pumps to drive the heavy-duty, high-
torque rear wheel and drum motors
independently. Should the drum or
wheels begin to spin, there is always
hydraulic flow to the non-spinning
motor, allowing continuous tractive
effort. Especially useful in loose
underfoot conditions.
Controllability is another feature of
dual propel pumps. The operator is able
to stop, maintain machine position and
change directions while on a grade.
The CS423E is designed to achieve high
productivity on level to mild grades.
The CS433E and CP433E provide high
productivity when working on more
demanding grades. These machines are
more effective in trench applications.

Sloped Hood Design


The sloped fiberglass hood design provides good service access and exceptional operator
visibility.
Visibility to the tire edges and rear of
machine is exceptional. The sloped
hood allows the operator to see
obstacles measuring 1 meter (3' 3")
high located 1 meter (3' 3") to the rear
of the machine. Excellent visibility
increases productivity when working
near obstructions or maneuvering
around the job site.
Lockable engine hood opens quickly
and easily with the use of gas struts to
provide good access to the engine,
cooling system and all service points.
Low sound levels for the operator and
the ground crew due to the engine hood
and cooling air flow through the rear
mounted radiator.

6
Open Platform with ROPS/FOPS Canopy
The platform is equipped with a ROPS/FOPS canopy and is enclosed by handrails and
features foot rests for sure footing and support when working on a grade.
Spacious and comfortable working
environment with all controls, levers,
switches and gauges positioned to
maximize productivity.
Unrestricted visibility to the drum and
tire edge and to the side and rear of the
machine.
The platform is enclosed by handrails
and features foot rests for sure footing
and support when working on a grade.
Standard equipment includes two
front-facing and two rear-facing
working lights, handrails with foot
rests, a lockable vandalism guard
and a rear view mirror.

Operator’s Station
Ergonomically designed for maximum operator productivity while offering excellent
visibility and unmatched comfort.
Steering console and operational
gauges on the CS433E and CP433E are
infinitely adjustable within the tilt range
to the desired position of the operator.
Entire console tilts for simple entrance
and exit.
Single lever control for propel and
vibratory On/Off provides simple
and low effort operation. A padded
adjustable wrist rest helps reduce
operator fatigue.
Comfortable and durable seat has
adjustable fore/aft position, bottom
cushion height, suspension stiffness
and flip-up arm rests.
Isolated operator’s station with heavy-
duty rubber mounts reduce machine
vibration transmitted to the operator.
Rubber floor mat helps further isolate
the operator from machine vibration
and noise.

7
ROPS/FOPS Cab
Optional cab can increase machine utilization and provides greater year-round comfort in
extreme environment conditions.
The cab is a spacious and comfortable
work environment that includes large
windows, more interior room with
storage areas, a cup holder, better
ergonomics and low noise levels.

Full-length glass windshield provides


exceptional visibility to the drum and
optional leveling blade.
Included with cab are two exterior rear
view mirrors, front and rear working
lights and cab lift cylinder.

Windshield wipers on front and rear


windows allow good vision in adverse
conditions.

Slide-open side windows for cross


ventilation.

Climate control with standard heater


and defroster for maximum operator
comfort. Optional air conditioning helps
keep the cab cool and comfortable.

Padfoot Shell Kit


Optional padfoot shell kit expands the application range of the CS423E and CS433E to
work in either cohesive or semi-cohesive material.
Expands machine versatility and
utilization while providing a simple and
cost-effective solution for jobs that may
require both padfoot and smooth drum
compaction.
Dual-purpose bumper is also included
with the shell kit and does not need to
be removed once installed.
Bumper also provides adjustable
scraper teeth for use with the padfoot
shell kit and adjustable scraper plates
for use with the standard smooth drum.
When the scraper plates are not being
used, they can be bolted onto the front
of the bumper for convenient storage.
Padfoot shell halves can be quickly and
easily installed or removed in about an
hour with the use of an approved lifting
device. Two-piece shell kit features a
total of 92 pads with a pad height of
90 mm (3.5").

8
Padfoot Drum and Scrapers
Padfoot drum provides superior performance when compacting cohesive materials.

The padfoot drum has 108 pads welded


on the drum in a chevron arrangement.
Each pad is 90 mm (3.5") high and has
a pad face surface area of 63.8 cm2
(9.9 in2) to achieve high ground contact
pressure for maximum compaction.
The pads are involuted in shape to
walk out of the lift without fluffing or
“kicking up” the soil around the pads.
Pads are tapered to help clean
themselves.
Heavy-duty scrapers mounted on
the front and rear of the drum are
individually adjustable and replaceable.
Helps to reduce excessive material
build up between the pads.

Leveling Blade
Leveling blade option for the CS433E and CP433E increases machine versatility and
utilization, plus greatly enhances productivity.
Expands machine versatility and
utilization for use in material
knockdown, site leveling, trench
backfilling and light dozing
applications.

Leveling blade control is controlled by


operator’s right foot to provide simple,
one-handed operation of machine
propel, steering and blade functions
simultaneously.

Dual propel pumps provide plenty of


power and tractive effort for effective
blade use without drum spin.

No special permits for transporting


with a blade width of 2.10 m (6' 11").
Blade cutting depth is 76 mm (3").

Two-piece reversible and replaceable


cutting edges increase edge service life
and reduce replacement costs.

High mounting point provides superior


curb and obstruction clearance.
9
Reliability and Serviceability
The 400E-Series Soil Compactors provide exceptional reliability and serviceability that
you’ve come to expect from Caterpillar.

Visual indicators allows easy check of S•O•SSM ports allow for simple fluid
radiator coolant, hydraulic oil tank level collection of engine oil, engine coolant
and air restriction indicator. and hydraulic oil.

Operator’s station tilts forward to allow Secure hose routing with polyethylene
convenient access to the hydraulic routing blocks to reduce rubbing and
pumps. increase service life.

Rear mounted cooling system provides Nylon braided wrap and all-weather
easy access for cleaning. Hydraulic oil connectors ensure electrical system
cooler tilts rearward for additional integrity. Electrical wiring is color-
access to the radiator. coded, numbered and labeled with
component identifiers to simplify
Sealed-for-life bearings in the
articulation hitch never need to be troubleshooting.
greased. Maintenance-free Caterpillar batteries
are mounted in the rear of the machine
500 hour engine oil change interval.
and are protected by the engine hood.
3 year/3000 hour vibratory bearing lube Caterpillar batteries are specifically
service interval reduces maintenance. designed for maximum cranking power
and protection against vibration.
Quick connect hydraulic test ports
The one-piece fiberglass hood tilts for
simplify system diagnostics. Machine is Product Link wire-ready. exceptional access to the engine and
The Caterpillar Product Link System cooling system. Daily service points are
Ecology drains provide an (CPLS) ensures maximum uptime and
environmental method to drain fluids. accessible from ground level and are
minimum repair costs by simplifying grouped on one side of the engine.
They are included on the radiator, tracking of equipment fleets. Provides
engine oil pan, hydraulic and fuel tank. automatic machine location and hour
updates. Can be obtained through your
local Caterpillar dealer.

10
Drum and Vibratory System Specifications Transmission
Drum width 1676 mm 66" Two variable displacement piston
Drum shell thickness 25 mm 1" pumps supply pressurized flow to two
Drum diameter 1225 mm 48" dual displacement piston motors. One
Drum diameter (over pads) CP433E 1225 mm 48" pump and motor drives the drum propel
Pads (CP433E only) system while the other pump and motor
Number of pads 108 drives the rear wheels.
Pad height 90 mm 3.5"
Pad face area 63.8 cm2 9.9 in2 The dual pump system ensures equal
Number of chevrons 9 flow to the drive motors regardless of
Eccentric weight drive Hydrostatic the operating conditions. In case the
drum or wheels lose traction, the other
Weight at Drum (with ROPS/FOPS canopy) motor can still build additional pressure
CS423E 3410 kg 7,515 lb to provide added torque.
CS433E 3410 kg 7,515 lb
CP433E 3760 kg 8,295 lb The drive motors have two swashplate
positions allowing operation at either
Static Linear Load*
CS423E 20.3 kg/cm 114 lb/in maximum torque for compaction and
CS433E 20.3 kg/cm 114 lb/in gradeability or maximum speed for
*Meets NFP 98736 class: VM2 moving around the job site. A rocker
switch at the operator’s console triggers
Frequency an electric over hydraulic control to
Standard 31.9 Hz 1914 vpm change speed ranges. Speed changes
Optional 23.3 - 31.9 Hz 1400 - 1914 vpm can be made without stopping.
Nominal Amplitude
A single propel lever located on the
High 1.67 mm 0.066"
control console provides smooth
Low 0.84 mm 0.033"
hydrostatic control of the machine’s
High (CP433E only) 1.55 mm 0.061"
infinitely variable speeds in both
Low (CP433E only) 0.78 mm 0.031"
forward and reverse.
Centrifugal Force @ 31.9 Hz (1914 vpm)
Maximum 134 kN 30,000 lb Max. speeds (forward and reverse):
Minimum 67 kN 15,000 lb Low range 5.5 km/h – 3.4 mph
High range 11.5 km/h – 7.1 mph

Operator and Machine Protective Equipment


Roll Over Protective Structure/Falling Object Protective Structure (ROPS/FOPS) canopy
is a two-post structure that bolts directly onto flanges welded to the operator
platform. The structure meets SAE J1040 and SAE J231, ISO 3449 and ISO 3471.
This structure may be an option in some areas and standard in others. Consult your
dealer for specifics.

Backup Alarm — 112 dB(A) alarm sounds whenever the machine is in reverse.

Forward Warning Horn — located on the front of machine to alert ground personnel.

Seat Belt — 76 mm (3") wide seat belt is standard.

CS423E, CS433E and CP433E specifications 11


Engine Engine Final Drives and Axle
CS423E CS433E and CP433E Final drive is hydrostatic with gear
reducer to the drum and hydrostatic
Four-stroke, four cylinder Caterpillar Four-stroke, four cylinder Caterpillar with differential and planetary gear
3054C naturally aspirated diesel engine. 3054C turbocharged diesel engine. reduction to each wheel.
Meets U.S. EPA Tier 2 and European Meets U.S. EPA Tier 2 and European
EU Stage II emissions control standards EU Stage II emissions control standards
Axle:
worldwide. worldwide. No derating required up to Heavy-duty fixed rear axle with a
3000 m (9840') altitude. limited slip differential for smooth and
quiet torque transfer.
Ratings at RPM kW hp Ratings at RPM kW hp Axle width 1.27 m (4' 2")
Gross power 2200 62 83 Gross power 2200 75 100
Tires:
Ratings of Caterpillar machine engines are based on standard air conditions of 25°C
CS423E/CS433E: 14.9" x 24" 6-ply
(77°F) and 100 kPa (29.61" Hg) dry barometer. Power is based on using API gravity
flotation
of 35 at 15°C (60°F), fuel having a LHV of 42 780 kJ/kg (18,390 Btu/lb) used at
CP433E: 14.9" x 24" 8-ply traction
30°C (86°F) [ref. a fuel density of 838.9 g/L (7.001 lb/U.S. gal)]. Net power
advertised is the power available at the flywheel when the engine is equipped
with fan, air cleaner, muffler and alternator.

The following ratings apply at 2200 RPM when tested under the specified standard Brakes
conditions:
Service brake features
• Closed-loop hydrostatic drive system
Net Power kW hp Net Power kW hp provides dynamic braking during
EEC80/1269 59 80 EEC80/1269 72 96
operation.
ISO 9249 59 80 ISO 9249 72 96
SAE J1349 59 80 SAE J1349 72 96
Secondary brake features*
• Spring-applied/hydraulically-released
Dimensions Dimensions multiple disc type brake mounted on
Bore 105 mm 4.13" Bore 105 mm 4.13"
the drum drive gear reducer.
Stroke 127 mm 5" Stroke 127 mm 5"
Secondary brakes are activated by a
Displacement 4.4 liters 269 cu. in. Displacement 4.4 liters 269 cu. in.
button on the operator’s console, loss
of hydraulic pressure in the brake
circuit or when the engine is shut
down. A brake interlock system
prevents driving through the
secondary brake.
*Machines sold within the European Union are also
equipped with rear axle brakes. Braking system meets
SAE J1472 and EN 500-4.

Total Customer Support System


Service capability — most dedicated dealer support system to Remanufactured parts — pumps and motors, pod-style weight
ensure fast service whether at the dealer’s shop or in the field by housings, engines, fuel system and charging system components
trained technicians using the latest tools and technology. available from dealer at a fraction of new part cost.

Parts availability — most parts on dealer’s shelf when you need Machine management services — effective preventive
them. Computer-controlled, emergency search system backup. maintenance programs, cost-effective repair options, customer
meetings, operator and mechanic training.
Parts stock lists — dealer helps you plan on-site parts stock to
minimize your parts investment while maximizing machine Flexible financing — your dealer can arrange attractive financing
availability. on the entire line of Caterpillar equipment. Terms structured to
meet cash flow requirements. See how easy it is to own, lease or
Literature support — easy-to-use parts books, operation and rent Cat® equipment.
maintenance manuals and service manuals to help you get
maximum value from your Caterpillar equipment.

12 CS423E, CS433E and CP433E specifications


Instrumentation Frame Steering
The instrument panel is located in front Fabricated from heavy gauge steel plate A priority-demand hydraulic power-
of the operator and features a warning and rolled sections and joined to the assist steering system provides smooth
system that constantly monitors various drum yoke at the articulation pivot. low-effort steering. The steering system
machine systems; alerts the operator if Articulation area is structurally has priority over other other hydraulic
a problem does occur with a light and reinforced and joined by hardened functions.
an audible warning horn. Warning steel pins. One vertical pin provides a
system includes: Low Engine Oil steering angle of ± 37° and a horizontal Minimum turning radius:
Pressure, High Engine Coolant pin allows frame oscillation of ± 15°. Inside 3.05 m (10')
Temperature, High Hydraulic Oil The articulation lock prevents machine Outside 4.73 m (15' 6")
Temperature and Low Charge System articulation when placed in the locked
Pressure. Instrumentation also includes position. Sealed-for-life hitch bearings Steering angle:
an Alternator Malfunction Light, never need maintenance. Frame also (each direction) ± 37°
Service Hour Meter and Fuel Gauge. includes tie-down points for transport.
Oscillation angle:
(each direction) ± 15°

Hydraulic system:
Service Refill Capacities Electrical Two 64 mm (2.5") bore, double-acting
Liters Gallons The 24-volt electrical system consists cylinders powered by a gear-type pump.
Fuel tank (useable) 153 40 of two maintenance-free Caterpillar
Total capacity 160 42 batteries, color-coded and numbered
Cooling system 18 4.8 wiring wrapped in nylon braid. The
Engine oil w/filter 6.8 1.8 starting system provides 750 cold
Eccentric weight housing 12 3.2 cranking amps (cca). The system
Limited slip axle 15.9 4.2 includes a 55-amp alternator.
Planetary gear reducers 2.3 0.6
Hydraulic system 60 16
Hyd. filtration system (pressure type)

Operating Weights
Weights shown are approximate and include lubricants, coolant, full fuel and hydraulic tanks and a 80 kg (175 lb) operator.

Machine Weights CS423E CS433E CP433E


with open platform 6515 kg 14,370 lb 6515 kg 14,370 lb 6915 kg 15,245 lb
with ROPS/FOPS canopy 6745 kg 14,875 lb 6745 kg 14,875 lb 7145 kg 15,750 lb
equipped with leveling blade — — 7135 kg 15,735 lb 7535 kg 16,610 lb
equipped with padfoot shell kit 7795 kg 17,190 lb 7795 kg 17,190 lb — —
equipped with blade and shell kit — — 8185 kg 18,050 lb — —
with ROPS/FOPS cab 6990 kg 15,415 lb 6990 kg 15,415 lb 7390 kg 16,290 lb

Weight at Drum
with open platform 3360 kg 7,405 lb 3360 kg 7,405 lb 3710 kg 8,185 lb
with ROPS/FOPS canopy 3410 kg 7,515 lb 3410 kg 7,515 lb 3760 kg 8,295 lb
equipped with leveling blade — — 3960 kg 8,725 lb 4310 kg 9,505 lb
equipped with padfoot shell kit 3935 kg 8,675 lb 3935 kg 8,675 lb — —
equipped with blade and shell kit — — 4485 kg 9,885 lb — —
with ROPS/FOPS cab 3510 kg 7,740 lb 3510 kg 7,740 lb 3865 kg 8,520 lb

CS423E, CS433E and CP433E specifications 13


Dimensions
CS423E CS433E CP433E
A Overall length 4.96 m (16' 3") 4.96 m (16' 3") 4.96 m (16' 3")
B Length with blade — — 5.34 m (17' 6") 5.34 m (17' 6")
C Overall width 1.8 m (5' 11") 1.8 m (5' 11") 1.8 m (5' 11")
D Drum width 1.7 m (5' 6") 1.7 m (5' 6") 1.7 m (5' 6")
E Width with blade — — 2.10 m (6' 11") 2.10 m (6' 11")
F Blade height — — 559 mm (22") 559 mm (22")
G Blade cutting depth — — 76 mm (3") 76 mm (3")
H Drum shell thickness 25 mm (1") 25 mm (1") 25 mm (1")
I Drum diameter 1225 mm (48") 1225 mm (48") — —
Drum diameter over pads — — — — 1225 mm (48")
J Height at ROPS/FOPS canopy 2.93 m (9' 7") 2.93 m (9' 7") 2.93 m (9' 7")
K Height at ROPS/FOPS cab 2.93 m (9' 7") 2.93 m (9' 7") 2.93 m (9' 7")
L Wheelbase 2.60 m (8' 6") 2.60 m (8' 6") 2.60 m (8' 6")
M Ground clearance 403 mm (15.9") 403 mm (15.9") 403 mm (15.9")
N Curb clearance 375 mm (14.8") 375 mm (14.8") 375 mm (14.8")
Inside turning radius 3.05 m (10') 3.05 m (10') 3.05 m (10')
Outside turning radius 4.73 m (15' 6") 4.73 m (15' 6") 4.73 m (15' 6")

J-K H

M N F

I G

L
A
B

D C E

14 CS423E, CS433E and CP433E specifications


CS423E, CS433E and CP433E Specifications
Operating Weights (with ROPS/FOPS) CS423E CS433E CP433E
Machine 6745 kg 14,875 lb 6745 kg 14,875 lb 7145 kg 15,750 lb
at drum 3410 kg 7,515 lb 3410 kg 7,515 lb 3760 kg 8,295 lb
Static linear load (at drum) 20.3 kg/cm 114 lb/in 20.3 kg/cm 114 lb/in — —

Machine Dimensions
Overall length 4.96 m (16' 3") 4.96 m (16' 3") 4.96 m (16' 3")
Overall width 1.8 m (5' 11") 1.8 m (5' 11") 1.8 m (5' 11")
Overall height at ROPS/FOPS canopy 2.93 m (9' 7") 2.93 m (9' 7") 2.93 m (9' 7")
Wheelbase 2.60 m (8' 6") 2.60 m (8' 6") 2.60 m (8' 6")
Ground clearance 403 mm (17.4") 450 mm (17.7") 442 mm (17.4")
Curb clearance 495 mm (15.9") 495 mm (15.9") 495 mm (15.9")
Inside turning radius 3.05 m (10') 3.05 m (10') 3.05 m (10')

Drum Dimensions
Drum width 1.7 m (5' 6") 1.7 m (5' 6") 1.7 m (5' 6")
Drum shell thickness 25 mm (1") 25 mm (1") 25 mm (1")
Drum diameter 1225 mm (48") 1225 mm (48") — —
Drum diameter over pads — — — — 1225 mm (48")
Number of pads — — — — 108
Pad height — — — — 90 mm (3.5")
Pad face area — — — — 63.8 cm2 9.9 in2

Vibratory System
Frequency
Standard 31.9 Hz 1914 vpm 31.9 Hz 1914 vpm 31.9 Hz 1914 vpm
Nominal amplitude
High 1.67 mm 0.066" 1.67 mm 0.066" 1.55 mm 0.061"
Low 0.84 mm 0.033" 0.84 mm 0.033" 0.78 mm 0.031"
High (with padfoot shell kit) 1.67 mm 0.066 1.67 mm 0.066 — —
Low (with padfoot shell kit) 0.84 mm 0.033" 0.84 mm 0.033" — —
Centrifugal force @ 31.9 Hz (1914 vpm)
Maximum 134 kN 30,000 lb 134 kN 30,000 lb 134 kN 30,000 lb
Minimum 67 kN 15,000 lb 67 kN 15,000 lb 67 kN 15,000 lb
Maximum (with padfoot shell kit) 134 kN 30,000 lb 134 kN 30,000 lb — —
Minimum (with padfoot shell kit) 67 kN 15,000 lb 67 kN 15,000 lb — —

Power Train
Engine 3054C 3054C 3054C
Gross power 62 kW 83 hp 75 kW 100 hp 75 kW 100 hp
Maximum speeds
High range 11.5 km/h 7.1 mph 11.5 km/h 7.1 mph 11.5 km/h 7.1 mph
Low range 5.5 km/h 3.4 mph 5.5 km/h 3.4 mph 5.5 km/h 3.4 mph
Axle (differential) Limited Slip Limited Slip Limited Slip
Tire size 14.9" x 24" 6-ply 14.9" x 24" 6-ply 14.9" x 24" 8-ply

Miscellaneous
Electrical system 24 VDC 24 VDC 24 VDC
Articulation angle ± 37° ± 37° ± 37°
Oscillation angle ± 15° ± 15° ± 15°
Fuel capacity 160 liters 42 gal 160 liters 42 gal 160 liters 42 gal

Optional Equipment
• ROPS/FOPS Cab • Air Conditioning • Roll-Down Sun Screen
• Sun Visor • Cab Internal Rear View Mirrors • Rotating Beacon
• Vibratory Gauge • Variable Frequency • Leveling Blade
• Polyurethane Drum Scrapers • Padfoot Shell Kit
• Smooth Drum Rear Steel Scraper • Operator Platform Lift Cylinder

CS423E, CS433E and CP433E specifications 15


Caterpillar offers a comprehensive line of vibratory soil compactors.
Contact your local Caterpillar dealer to learn more about the complete line of Caterpillar
Paving Products.

The Production-Class Soil Compactors


Operating Weight (with ROPS/FOPS)
CS54 10 485 kg 23,120 lb
CP54 11 320 kg 24,960 lb
CS56 11 414 kg 25,164 lb
CP56 11 361 kg 25,047 lb
CS64 14 238 kg 31,389 lb
CP64 14 311 kg 31,550 lb
CS74 15 455 kg 34,072 lb
CP74 15 333 kg 33,804 lb
CS76 16 758 kg 36,945 lb
CS76 XT 18 611 kg 41,030 lb
CP76 16 896 kg 37,249 lb
Drum Width 2.13 m 84"
Gross Power, CS/CP54 97 kW 130 hp
Gross Power, CS/CP56, 64, 74 116 kW 156 hp
Gross Power, CS/CP76, CS76 XT 130 kW 174 hp

Not all models offered in all markets.

The 300C-Series Soil Compactors


Operating weight (with ROPS/FOPS)
CS323C 4540 kg 9,985 lb
CP323C 4745 kg 10,440 lb
Drum Width 1.27 m 4' 2"
Gross Power 52 kW 70 hp

© 2008 Caterpillar
All Rights Reserved.
www.cat.com

Featured machines in photography may include optional equipment.


Materials and specifications are subject to change without notice.

QEHQ9894-02 (04/08) CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

You might also like