Scribd
Upload
226 views

How To Get IPC MJPEG Stream Via HTTP Commands

This document provides instructions for getting an MJPEG video stream from an IP camera via HTTP commands. The camera firmware must be version 4.1 or higher. Users can access the stream through a browser by entering the camera's IP address and HTTP port followed by /ISAPI/Streaming/channels/102/httpPreview. Authentication may also be required.

Uploaded by

Инж.Стефан Чавдаров
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
226 views

How To Get IPC MJPEG Stream Via HTTP Commands

This document provides instructions for getting an MJPEG video stream from an IP camera via HTTP commands. The camera firmware must be version 4.1 or higher. Users can access the stream through a browser by entering the camera's IP address and HTTP port followed by /ISAPI/Streaming/channels/102/httpPreview. Authentication may also be required.

Uploaded by

Инж.Стефан Чавдаров
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Title: How to Get IPC MJPEG Stream via HTTP Commands Version: v1.

0 Date: 16/08/2018
Product: Cameras Page: 1 of 3

Preparation

1. The firmware of camera requires V4.1 or above

How to Get IPC MJPEG Stream via HTTP Commands

1. Configure video stream


a) HTTP commands get stream only be available under Sub stream.

b) Go to [Configuration]-[Video/Audio]-[Video], set the Stream Type as Sub-stream and Video


Encoding as MJPEG. Resolution can be adjusted according to the current condition.

2. Get stream on Firefox or Chrome


HTTP commands is only available on Firefox or Chrome browser.
a) URL:
HTTP without Authentication
http://<IP address of IPC>:<HTTP port>/ISAPI/Streaming/channels/102/httpPreview
HTTP with Authentication
© Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved.
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: +86-571-8807-5998 • Fax: +1 909-595-0788
E-Mail: [email protected] • www.hikvision.com
Title: How to Get IPC MJPEG Stream via HTTP Commands Version: v1.0 Date: 16/08/2018
Product: Cameras Page: 2 of 3

http://<username>:<password>@<IP address of IPC>:<HTTP


port>/ISAPI/Streaming/channels/102/httpPreview
Snapshot using HTTP URL
http://<IP address of IPC>:<HTTP port>/ISAPI/Streaming/channels/1/picture

b) Example:
http://10.9.97.33/ISAPI/Streaming/channels/102/httpPreview
http://admin:[email protected]/ISAPI/Streaming/channels/102/httpPreview
http://10.9.97.33/ISAPI/Streaming/channels/1/picture

Note:
If the HTTP port of the device is still 80 (default), then “:<HTTP port>” is not required;
DS-1X23G0 series cameras don’t support get MJPEG stream via HTTP commands.

© Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved.


No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: +86-571-8807-5998 • Fax: +1 909-595-0788
E-Mail: [email protected] • www.hikvision.com
Title: How to Get IPC MJPEG Stream via HTTP Commands Version: v1.0 Date: 16/08/2018
Product: Cameras Page: 3 of 3

First Choice for Security Professionals


HIKVISION Technical Support

© Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved.


No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: +86-571-8807-5998 • Fax: +1 909-595-0788
E-Mail: [email protected] • www.hikvision.com

You might also like