Resume

of
Mohammed Hassanien SERROR

Business Address:
Cairo University
Faculty of Engineering, Department of Structural Engineering
Gamaa Street, Giza, Egypt..
Phone : (+202) 2634-3729/247-0329
Mobile: (+2) 01001666852
Fax : (+202) 2634-3849
Email: [email protected], [email protected] , [email protected]

Personal:
Place of Birth: Cairo
Date of Birth: January 18, 1980.
Marital Status: Married.

Education
Ph.D. [October, 2003 - September, 2006]
University: The University of Tokyo, Department of Civil Engineering.
Grade: “A” Grade in all Ph.D. Requirements.
Dissertation: “Distributed Object-based Software Environment for Urban System
Integrated Simulation under Urban-Scale Hazard, Case Study: Integrated
Earthquake Simulation.”

M.Sc. [October, 2001 - September, 2003]

University: Cairo University, Department of Civil Engineering;
Grade: Distinction with Honor.
Dissertation: “Effect of Vertical Web Stiffeners on the Lateral Torsional Buckling
Behavior of Steel I-Beams.”

B.Sc. [October, 1996 - July, 2001]

University: Cairo University, Department of Civil Engineering
Grade: Distinction with Honor.
Dissertation: Design of Steel Cement Plant Project, Distinction with Honor Degree.
GPA / 4: 3.87

1/8
 Language Skills
Arabic: Native.
English: Fluent.
French/Japanese: Basic.

Professional Experience
January 2013 to Present:
1- Associate Professor, Cairo University, Dept. of Structural Engineering.
Teaching Courses: High-Rise Buildings Design, Steel Structures Design, Graduation Project
2- Area Manager of COSMOS-E Engineers & Consultants at Middle East.
Design, Coordination and Management for the following Construction Projects:
1- Dareen MUDP, Residential and Commercial Buildings, Dareen, Jubail, KSA.
2- JAZAN Grain Silos and Flour Mill, Grain Silos and Flour Mill Organization GSFMO, KSA
3- Abou Hashima Steel Mini Mill Plant (Egyptians Steel), Beni Suef, Egypt.

October 2007 to December 2012:

1- Assistant Professor, Cairo University, Dept. of Structural Engineering.
2- Engineering Associate, COSMOS-E Engineers & Consultants.

Design, Coordination and Management for the following Construction Projects:

1- Steel Making Plant and DRI Plant - Suez Steel Company, Suez, Egypt.
2- Rolling Mill Plant – Suez Steel Company, Suez, Egypt.
3- Lime Plant – Suez Steel Company, Suez, Egypt.
4- Uniboard Paper Factory, Sadat City, Egypt.
5- Alexandria Sugar Plant – SAVOLA Group, Alexandria, Egypt.
6- Misr Express Cold Stores, 6th of October City, Egypt.
7- EHC Project – Ammonia Sulphate Plant, Suez, Egypt.
8- El-Sewedy Cement Factory – complete line, Suez, Egypt.
9- BMIC Cement Factory – complete line, Assuit, Egypt.
10- EMAS Glass factory in 10th of Ramadan
11- Food Factory – EDITA Food Industries (Berzi Group), 6th of October, Egypt.
12- Vacsera Pioneer for Pharmaceutical Industry Company, 6th of October City, Egypt.
13- General Motors Plant Extensions, 6th of October, Egypt.
14- Adabya Port: Development of two new berths
15- Polaris Industrial Park at 6th of October City
16- PIIP Industrial Park at 10th of Ramadan
17- JICA Environmental Monitoring System Project, Cairo
18- Kattamya Plaza, SODIC Real State, Kattameya, Egypt.

2/8
Oct. 2006 to Oct. 2007:
1- Postdoctoral fellow at the Bridge & Structure Laboratory, University of Tokyo, funded by
the Japan Society for the Promotion of Science (JSPS, http://www.jsps.go.jp/english/).
Achievements: collaborative research with Dept. of Material Eng., University of Tokyo, for
experimental investigations and numerical analysis of an innovative laminated structural
steel, low-ductility_high-strength/high-ductility_low-strength (LDHS/HDLS) laminate.
The laminate deformability is in question and has been studied.

Oct. 2003 to Sept. 2006:

1- Member of the Applied Mechanics Laboratory and Intelligent Modeling Laboratory,
University of Tokyo, Graduate School of Engineering.
Achievements: The DOSE (Distributed Object-based Software Environment) has been
envisioned and developed for urban system integrated simulation under urban-scale hazards
such as earthquake, tsunami, and blast. City of Kobe (Kobe district) and Bunkyo city
(Tokyo district) have been simulated under earthquake hazard.
2- Member of the International Alliance for Interoperability (IAI, http://www.iai-
international.org/) Japan chapter, civil/structural engineering group.
Achievements: The Shared Computer-Aided Structural Design Model has been envisioned
and developed to enable interoperability among structural design participants in
construction industry through the so-called E-Interaction, IAI ST-7 project.
3- Project Leader for IAI ST-7 project (http://ce.vtt.fi/iaiIFCprojects/ListProjects.jsp).

Aug. 2001 to Sept. 2003:

1- Teaching/Research Assistant at Cairo University, Dept. of Civil Eng.
Teaching courses: High-rise Building; Steel Structures & Bridges; and Technical Writing
2- Structural Engineer at COSMOS-E, Engineers and Consultants Company, Cairo, Egypt.
Participated in Multinational Projects:
Khorafy Villas, Kuwait; Amran Cement Plant, Yemen; Wadi Mawr Bridge, Yemen;
Strengthening for Suez Steel Melt shop, Egypt; Alexandria City Center, Egypt; and San
Stefano Complex, Egypt.
Participated in Different Structural Engineering Activities:
1. Design of Steel and Reinforced/Prestressed Concrete Structures.
2. Strengthening/Rehabilitation for Steel and Reinforced Concrete Structures.
3. Workshop/Fabrication Drawings for Steel and Reinforced Concrete Structures.
Experienced Design Codes:
1. ACI and AISC (ASD and LRFD).
2. BS (8110, 5950, 4360, 4449, and 6399).
3. DIN (17100 and 1055), and Egyptian Code.
Experienced Structural Analysis Software Packages:
SAP, ETABS, SAFE, STAAD, MARC, ROBOBAT, and COSMOS/M

3/8
 Awards / Honors
1- Award for the Top 25 Articles from Elsevier Publishing for the publication of “Shared
Computer-Aided Structural Design Model for Construction Industry. (Infrastructure),”
Journal of Computer-Aided Design, Vol. 40, (2008). The article is ranked No. 15.
2- Postdoctoral Research Grant Award from the Japan Society for the Promotion of Science
(JSPS, http://www.jsps.go.jp/english/) at the Bridge & Structure Laboratory, University of
Tokyo. (Oct. 2006 – Mar. 2008)
3- Core Member in the organizing committee and review board of the 8th Association of
Pacific Rim Universities (APRU) Doctoral Students Conference at Keio University, Tokyo,
http://www.ic.keio.ac.jp/apru/dsc/index.html. (2007)
4- Research Grant Award from the University of Tokyo for “The Association of Pacific Rim
Universities (APRU) Enterprise Business Plan Competition,” at the National University of
Singapore. (2006)
5- Representative Research Award from the University of Tokyo for “The Association of
Pacific Rim Universities (APRU) Doctoral Student Conference,” at the University of
Oregon, U.S.A. (2005)
6- Project Leader Award from the International Alliance for Interoperability for the “ST-7
project: Shared Computer-Aided Structural Design Model.” (2005)
7- IML Openhouse Award from the Intelligent Modeling Laboratory (IML), University of
Tokyo, for the “Intelligent Modeling of an Integrated Earthquake Simulation.” (2004)
8- Japan Government (MEXT-Monbusho) Scholarship Award for the Ph.D. Program at the
University of Tokyo, Dept. of Civil Eng. (Oct. 2003 – Sept. 2006)
9- Egypt Engineers Syndicate Award from Egypt Government for “Distinctive Engineer in the
Structural Engineering.” (2001)
10- Prof. Shafek Agour Award from Cairo University for “Distinctive Design of Steel
Structures, Bachelor Dissertation Project.” (2001)
11- Prof. Abd-El-Rahman Helmy El-Ramly Award from Cairo University for “Distinctive
Undergraduate Performance in Soil Mechanics Courses.” (2001)
12- METU Internship Award from Middle East Technical University (METU) for “Distinctive
Undergraduate Student.” Turkey. (2000)

4/8
 Computer Skills
Operating Systems:
Microsoft Windows, UNIX, and Macintosh

General Programs:
Microsoft Office

Drawing and visualization Programs:

AUTOCAD, ARCHICAD, AVS, POVray, OCTAGA (VRML), and GID

In House Design Programs:

For design of steel and reinforced concrete structures based on international codes

Programming Languages:
C, C++, Java, Visual Studio, MATLAB, Mathematica, and FORTRAN

Grid and Parallel Computations:

Message Passing Interface (MPI), and OpenMP

Supervised Master’s Dissertations

- “Simplified Seismic Analysis Procedure for Base-Isolated Structures,” Cairo

University, 2013.
- “Assessment of Base Shear Reduction Factor for Steel Moment Resisting Frames
with Fluid Viscous Dampers,” Cairo University, 2013.
- “Assessment of Internal Forces Induced due to Differential Shortening of Vertical
Elements in Typical Medium- to High-Rise Buildings,” Cairo University, 2012.
- “Assessment of Tension Force Distribution in Steel Flush-End Moment Connection,” Cairo
University, 2012.
- “Damping Identification Procedure for Linear Systems: Mixed Numerical-Experimental
Approach,” Cairo University, 2011.
- “Assessment for Local Buckling Coefficient of I-Section Web under Uniform
Compression,” Cairo University, 2011.
- “Effect of Pushover Load Pattern on Seismic Responses of RC Frame Buildings,” Cairo
University, 2010.
- “Assessment of Force Reduction Factor for Steel Frames in the Proposed Egyptian Code,”
Cairo University, 2009.

5/8
 Publications
International Journal Publications:
1- H. Hossam El-Anwar, M. Hassanien Serror and H. Sobhy Sayed, “Damping
Identification Procedure for Linear Systems: Mixed Numerical-Experimental Approach,”
Earthquakes and Structures, an International Journal, Techno Press, Vol. 4, No. 2, February
2013.
2- M. Hassanien Serror and J. Inoue, “Analytical Study for Deformability of Laminated
Sheet Metal with Full Interfacial Bond,” Journal of Engineering Mechanics, ASCE, Vol.
139(1), pp. 94-103, January 2013.
3- M. Hassanien Serror and A. Essam Fathy, “Assessment of Internal Forces Induced due to
Differential Shortening of Vertical Elements in Typical Medium- to High-Rise Buildings,”
The Journal of American Science, Marsland Press, USA, November 2012.
4- M. Hassanien Serror, Nayer A. El-Esnawy and Rania F. Abo-Dagher, “Effect of Pushover
Load Pattern on Seismic Responses of RC Frame Buildings,” The Journal of American
Science, Marsland Press, USA, February 2012.
5- M. Hassanien Serror, “Effect of Web Opening on Buckling Instability of Simply
Supported Steel I-Beam,” Journal of Civil Engineering and Architecture, David Publishing
Company, Vol. 5, No.9, pp. 809-818, Sep. 2011, ISSN 1934-7359, USA. Indexed in:
EBSCO Massachusetts USA, Cambridge Science Abstracts CSA, Ulrich’s Periodicals
Directory, and Summon.
6- Hesham Sobhy Sayed and M. Hassanien Serror, “Prying Force Assessment using
Nonlinear Finite Element Model,” Journal of Civil Engineering and Architecture, David
Publishing Company, Vol. 4, No.7, pp. 56-65, July 2010, ISSN 1934-7359, USA. Indexed
in: EBSCO Massachusetts USA, Cambridge Science Abstracts CSA, Ulrich’s Periodicals
Directory, and Summon.
7- M. Hassanien Serror, J. Inoue, M. Hori, Y. Fujino, “Distributed Object-based Software
Environment for Urban System Integrated Simulation under Urban-Scale Hazard. Part-I:
Infrastructure,” Earthquake Engineering and Structural Dynamics, Vol. 36, pp. 1545-1560,
2007.
8- M. Hassanien Serror, J. Inoue, M. Hori, Y. Fujino, T. Ichimura, “Distributed Object-
based Software Environment for Urban System Integrated Simulation under Urban-Scale
Hazard. Part-II: Application,” Earthquake Engineering and Structural Dynamics, Vol. 36,
pp. 1561-1579, 2007.
9- M. Hassanien Serror, J. Inoue, Y. Adachi, M. Hori, Y. Fujino, “Shared Computer-Aided
Structural Design Model for Construction Industry. (Infrastructure),” Journal of Computer-
Aided Design, In-Press/Online, 2007.
10- M. Hassanien Serror, M. Bahaa, H. Sobhy, A. Farouk, J. Inoue, “Effect of Vertical Web
Stiffeners on the Lateral Torsional Buckling Behavior of Cantilever Steel I-Beam,” JSCE,
Journal of Applied Mechanics, Vol. 4, 2004.

6/8
Local Journal Publications:
1- Maha M. Hassan, M. Hassanien Serror and Sherif A. Mourad, “Assessment of Force
Reduction Factor for Steel Frames in the Proposed Egyptian Code,” Journal of
Engineering and Applied Science, Faculty of Engineering, Cairo University, Vol. 57, No.
3, pp. 217-231, June 2010.
2- M. Said El-Adly, M. Hassanien Serror and A. Farouk Hassan, “Assessment for Local
Buckling Coefficient of I-Section Web under Uniform Compression,” Journal of
Engineering and Applied Science, Faculty of Engineering, Cairo University, Vol. 58, No.
5, pp. 403-415, Oct. 2011.

International Conference Publications:

1- M. Hassanien Serror, Maha M. Hassan and Sherif A. Mourad, “Towards a Boundary
between Special and Ordinary Steel Moment Resisting Frames in the Egyptian Code,” 14th
European Conference on Earthquake Engineering, Topic: T3-Paper 197, Ohrid, Republic of
Macedonia, 30.08-03.09.2010
2- M. Hassanien Serror, “Localized Necking in Laminated Metal Sheets: Forming Limit
Analysis,” International Conference on Advanced Materials for Application in Acoustics
and Vibration, The British University in Egypt, 4-6 January 2009, (M1 Advanced
Materials, paper no. 6).
3- M. Hassanien Serror, J. Inoue, Y. Adachi, Y. Fujino, “Decentralized Computer-Aided
Structural Design Model for Construction Industry: IAI/ST-7 Project,” Proc. of 37th
International Conference on Computers and Industrial Engineering, Alexandria, Egypt,
October 2007.
4- M. Hassanien Serror, J. Inoue, T. Koseki, and Y. Fujino, “Study for the Deformability of
Layered Solids under Plane-Strain Condition,” Proc. of Materials Science & Technology
2007 Conference and Exhibition, Detroit, Michigan, September 2007.
5- M. Hassanien Serror, J. Inoue, M. Hori, Y. Fujino, “System Integrated Simulation for an
Urban-scale Earthquake Hazard,” Topping, B.H.V., (Editor), Proc. of the Eighth
International Conference on Computational Structures Technology, Civil-Comp Press, Las
Palmas, Spain, September 2006.
6- M. Hassanien Serror, J. Inoue, Y. Adachi, Y. Fujino, “Building on IFC: E-Interaction for
Computer Aided Structural Design,” Topping, B.H.V., (Editor), Proc. of the Eighth
International Conference on Computational Structures Technology, Civil-Comp Press, Las
Palmas, Spain, September 2006.
7- M. Hassanien Serror, J. Inoue, M. Hori, Y. Fujino, “Distributed Object-based Software
Environment for Urban Systems Integrated Simulation,” Proc. of the Joint International
Conference on Computing and Decision Making in Civil and Building Engineering,
Montreal, Canada, June 2006.
8- M. Hassanien Serror, J. Inoue, Y. Adachi, Y. Fujino, “Building on IFC: E-Interaction
With/Within Structural Design Domain,” Proc. of the Joint International Conference on

7/8
 Computing and Decision Making in Civil and Building Engineering, Montreal, Canada,
June 2006.
9- M. Hassanien Serror, J. Inoue, T. Ichimura, M. Hori, “Kernel-Based Message Passing
Interfaced Integrated Earthquake Simulation,” Topping, B.H.V., (Editor), Proc. of the
Tenth International Conference on Civil, Structural, and Environmental Engineering
Computing, Civil-Comp Press, Rome, Italy, September 2005.
10- M. Hassanien Serror, J. Inoue, “Interoperability in an IFC-Compliant Integrated
Earthquake Simulation,” Topping, B.H.V., (Editor), Proc. of the Tenth International
Conference on Civil, Structural, and Environmental Engineering Computing, Civil-Comp
Press, Rome, Italy, September 2005.
11- M. Hassanien Serror, J. Inoue, “Software Environment for Urban-Scale Integrated
Earthquake Simulation,” Association of Pacific Rim Universities (APRU) Doctoral Student
Conference, The University of Oregon, Eugene, USA, August 2005.

International Symposium Publications

1- M. Hassanien Serror, J. Inoue, “Distributed DEM Vulnerability Analysis for Virtual City
of Wooden Houses under Earthquake Hazard,” JSCE, Proc. of the Eighth International
Summer symposium, Nagoya, Japan, July 2006.
2- M. Hassanien Serror, J. Inoue, “Seismic Soil-Structure Interaction in an Integrated
Earthquake Simulation,” JSCE, Proc. of the Seventh International Summer symposium,
Tokyo, Japan, July 2005.
3- M. Hassanien Serror, J. Inoue, “IT-Based Framework for Interoperability among FEA
Software Packages for Design of Integrated Simulations,” JSCE, Proc. of the Seventh
International Summer symposium, Tokyo, Japan, July 2005.
4- M. Hassanien Serror, H. Sobhy, A. Farouk, J. Inoue, “Effect of Vertical Web Stiffeners on
the Lateral Torsional Buckling Behavior of Simply Supported Steel I-Beam,” JSCE, Proc.
of the Sixth International Summer Symposium, Saitama, Japan, July 2004.

Technical Reports and Dissertations

1- M. Hassanien Serror, “Distributed Object-based Software Environment for Urban System
Integrated Simulation under Urban-Scale Hazard, Case Study: Integrated Earthquake
Simulation,” Ph.D. Dissertation at the Department of Civil Engineering, University of
Tokyo, Sept. 2006.
2- M. Hassanien Serror, “Effect of Vertical Web Stiffeners on the Lateral Torsional Buckling
Behavior of Steel I-Beams,” M.Sc. Dissertation at the Department of Civil Engineering,
Cairo University, July 2003.
3- M. Hassanien Serror, “Design of Steel Cement Plant,” Bachelor Dissertation at the
Department of Civil Engineering, Cairo University, July 2001.

8/8
 ‫ﻣﻠﺤﻖ اﻟﺴﻴﺮة اﻟﺬاﺗﻴﺔ‬
‫ﻟﻠﺪآﺘﻮر‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور‬
‫أﺳﺘﺎذ ﻣﺴﺎﻋﺪ‬
‫ﻗﺴﻢ اﻟﻬﻨﺪﺳﺔ اﻹﻧﺸﺎﺋﻴﺔ‬
‫آﻠﻴﺔ اﻟﻬﻨﺪﺳﺔ ‪ -‬ﺟﺎﻣﻌﺔ اﻟﻘﺎهﺮة‬
‫ﻣﺎﻳﻮ ‪2013‬‬ ‫ﺗﻘﺮﻳﺮ د‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور‬

‫اﻟﻤﺤﺘﻮﻳﺎت‬
‫ﻣﻘﺪﻣﺔ‬

‫أو ًﻻ‪ :‬اﻟﺘﺪرج اﻟﻮﻇﻴﻔﻲ‬

‫ﺛﺎﻧﻴ ًﺎ‪ :‬اﻷﻧﺸﻄﺔ اﻟﺘﺪرﻳﺴﻴﺔ‬

‫ﺛﺎﻟﺜ ًﺎ‪ :‬اﻷﻧﺸﻄﺔ اﻟﺒﺤﺜﻴﺔ‬

‫راﺑﻌ ًﺎ‪ :‬اﻷﻧﺸﻄﺔ اﻟﺠﺎﻣﻌﻴﺔ‬

‫‪2/19 ‬‬
 ‫ﻣﺎﻳﻮ ‪2013‬‬ ‫ﺗﻘﺮﻳﺮ د‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور‬

‫ﻣﻘﺪﻣــﺔ‪:‬‬
‫ﺗﻢ إﻋﺪاد هﺬا اﻟﺘﻘﺮﻳﺮ ﺑﻐﺮض ﺗﻘﺪﻳﻢ وﺻﻒ ﺗﻔﺼﻴﻠﻰ ﻷﻧﺸﻄﺔ اﻟﺴﻴﺪ اﻟﺪآﺘﻮر‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور )اﻷﺳﺘﺎذ اﻟﻤﺴﺎﻋﺪ ﺑﻘﺴﻢ‬
‫اﻟﻬﻨﺪﺳﺔ اﻹﻧﺸﺎﺋﻴﺔ – آﻠﻴﺔ اﻟﻬﻨﺪﺳﺔ – ﺟﺎﻣﻌﺔ اﻟﻘﺎهﺮة(‪ .‬ﺟﻤﻴﻊ اﻷﻧﺸﻄﺔ اﻟﺘﺎﻟﻲ ذآﺮهﺎ ﺗﻤﺖ ﻓﻲ اﻟﻤﺪة ﻣﻦ أآﺘﻮﺑﺮ ‪ 2007‬ﺣﺘﻰ ﺗﺎرﻳﺨﻪ‪.‬‬

‫و ﻗﺪ ﺗﻢ إﻋﺪاد اﻟﺘﻘﺮﻳﺮ و ﺗﻘﺴﻴﻤﻪ إﻟﻰ أرﺑﻌﺔ ﻓﺼﻮل هﻰ ﺑﺘﺮﺗﻴﺐ وﺟﻮدهﺎ ﻓﻰ اﻟﺘﻘﺮﻳﺮ آﻤﺎ ﻳﻠﻰ‪:‬‬

‫‪ -1‬اﻟﺘﺪرج اﻟﻮﻇﻴﻔﻲ‬

‫‪ -2‬اﻷﻧﺸﻄﺔ اﻟﺘﺪرﻳﺴﻴﺔ‬

‫‪ -3‬اﻷﻧﺸﻄﺔ اﻟﺒﺤﺜﻴﺔ‬

‫‪ -4‬اﻷﻧﺸﻄﺔ اﻟﺠﺎﻣﻌﻴﺔ‬

‫ﻓﻴﻤﺎ ﻳﻠﻰ ﺗﻔﺼﻴﻞ أﻗﺴﺎم اﻟﺘﻘﺮﻳﺮ اﻷرﺑﻌﺔ‪.‬‬

‫‪3/19 ‬‬
‫ﻣﺎﻳﻮ ‪2013‬‬ ‫ﺗﻘﺮﻳﺮ د‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور‬

‫أو ًﻻ‪ :‬اﻟﺘﺪرج اﻟﻮﻇﻴﻔﻲ‬

‫‪4/19 ‬‬
‫ﻣﺎﻳﻮ ‪2013‬‬ ‫ﺗﻘﺮﻳﺮ د‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور‬

‫اﻟﺘﺪرج اﻟﻮﻇﻴﻔﻲ ﻟﻠﺴﻴﺪ اﻟﺪآﺘﻮر‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور‪:‬‬

‫‪2002 / 02 / 12‬‬ ‫ﻋﻴﻦ ﻣﻌﻴﺪًا ﺑﻘﺴﻢ اﻟﻬﻨﺪﺳﺔ اﻹﻧﺸﺎﺋﻴﺔ ‪ -‬آﻠﻴﺔ اﻟﻬﻨﺪﺳﺔ ‪ -‬ﺟﺎﻣﻌﺔ اﻟﻘﺎهﺮة إﻋﺘﺒﺎرًا ﻣﻦ‬ ‫•‬
‫و ذﻟﻚ ﺑﻌﺪ ﺣﺼﻮﻟﻪ ﻋﻠﻰ درﺟﺔ ﺑﻜﺎﻟﻮرﻳﻮس اﻟﻬﻨﺪﺳﺔ اﻟﻤﺪﻧﻴﺔ ﻣﻦ ﺟﺎﻣﻌﺔ اﻟﻘﺎهﺮة ﺑﺘﻘﺪﻳﺮ "ﻣﻤﺘﺎز ﻣﻊ ﻣﺮﺗﺒﺔ اﻟﺸﺮف"‪.‬‬

‫‪2004 / 03 / 08‬‬ ‫ﻋﻴﻦ ﻣﺪرﺳ ًﺎ ﻣﺴﺎﻋﺪًا ﺑﻘﺴﻢ اﻟﻬﻨﺪﺳﺔ اﻹﻧﺸﺎﺋﻴﺔ ‪ -‬آﻠﻴﺔ اﻟﻬﻨﺪﺳﺔ ‪ -‬ﺟﺎﻣﻌﺔ اﻟﻘﺎهﺮة إﻋﺘﺒﺎرًا ﻣﻦ‬ ‫•‬
‫و ذﻟﻚ ﺑﻌﺪ ﺣﺼﻮﻟﻪ ﻋﻠﻰ درﺟﺔ اﻟﻤﺎﺟﺴﺘﻴﺮ ﻓﻲ اﻟﻬﻨﺪﺳﺔ اﻹﻧﺸﺎﺋﻴﺔ ﻣﻦ ﺟﺎﻣﻌﺔ اﻟﻘﺎهﺮة ﺑﺘﻘﺪﻳﺮ "ﻣﻤﺘﺎز"‪.‬‬

‫‪2007 / 11 / 28‬‬ ‫ﻋﻴﻦ ﻣﺪرﺳ ًﺎ ﺑﻘﺴﻢ اﻟﻬﻨﺪﺳﺔ اﻹﻧﺸﺎﺋﻴﺔ ‪ -‬آﻠﻴﺔ اﻟﻬﻨﺪﺳﺔ ‪ -‬ﺟﺎﻣﻌﺔ اﻟﻘﺎهﺮة إﻋﺘﺒﺎرًا ﻣﻦ‬ ‫•‬
‫و ذﻟﻚ ﺑﻌﺪ ﺣﺼﻮﻟﻪ ﻋﻠﻰ درﺟﺔ اﻟﺪآﺘﻮراﻩ ﻣﻦ ﺟﺎﻣﻌﺔ ﻃﻮآﻴﻮ ﺑﺎﻟﻴﺎﺑﺎن ﺑﺘﻘﺪﻳﺮ "ﻣﻤﺘﺎز"‪.‬‬

‫‪2012 / 12 / 22‬‬ ‫ﻋﻴﻦ أﺳﺘﺎذ ﻣﺴﺎﻋﺪ ﺑﻘﺴﻢ اﻟﻬﻨﺪﺳﺔ اﻹﻧﺸﺎﺋﻴﺔ ‪ -‬آﻠﻴﺔ اﻟﻬﻨﺪﺳﺔ ‪ -‬ﺟﺎﻣﻌﺔ اﻟﻘﺎهﺮة إﻋﺘﺒﺎرًا ﻣﻦ‬ ‫•‬
‫و ذﻟﻚ ﺑﻌﺪ إﺟﺘﻴﺎز ﻣﺘﻄﻠﺒﺎت اﻟﺘﺮﻗﻴﺔ ﺑﺘﻘﺪﻳﺮ ﻋﺎم ‪.%98‬‬

‫‪5/19 ‬‬
‫ﻣﺎﻳﻮ ‪2013‬‬ ‫ﺗﻘﺮﻳﺮ د‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور‬

‫ﺛﺎﻧﻴ ًﺎ‪ :‬اﻷﻧﺸﻄﺔ اﻟﺘﺪرﻳﺴﻴﺔ‬

‫‪6/19 ‬‬
‫ﻣﺎﻳﻮ ‪2013‬‬ ‫ﺗﻘﺮﻳﺮ د‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور‬

‫اﻷﻧﺸﻄﺔ اﻟﺘﺪرﻳﺴﻴﺔ ﻟﻠﺪآﺘﻮر‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور ﺗﺸﻤﻞ ﻣﺎ ﻳﻠﻰ‪:‬‬

‫‪ -1‬ﺗﺪرﻳﺲ ﻣﻘﺮرات اﻟﻤﺮﺣﻠﺔ اﻟﺠﺎﻣﻌﻴﺔ اﻷوﻟﻰ )ﻧﻈﺎم اﻟﻔﺼﻠﻴﻦ(‪:‬‬
‫ﻋﺪد‬
‫ﺳﻨﻮات اﻟﺘﺪرﻳﺲ‬ ‫ﻗﺴﻢ اﻟﺘﺪرﻳﺲ‬ ‫اﻟﻔﺮﻗﺔ‬ ‫اﺳﻢ اﻟﻤﻘــــــﺮر‬ ‫رﻣﺰ اﻟﻤﻘﺮر‬ ‫م‬
‫اﻟﻄﻠﺒﺔ‬
‫إﻧﺶ ‪-303‬‬
‫‪2013 – 2007‬‬ ‫‪500‬‬ ‫اﻟﻬﻨﺪﺳﺔ اﻟﻤﺪﻧﻴﺔ‬ ‫اﻟﺜﺎﻟﺜﺔ‬ ‫‪Steel Structures-1‬‬ ‫‪1‬‬
‫‪1‬‬
‫إﻧﺶ ‪-303‬‬
‫‪2013 – 2007‬‬ ‫‪500‬‬ ‫اﻟﻬﻨﺪﺳﺔ اﻟﻤﺪﻧﻴﺔ‬ ‫اﻟﺜﺎﻟﺜﺔ‬ ‫‪Steel Structures-2‬‬ ‫‪2‬‬
‫‪2‬‬

‫‪2008–2009‬‬ ‫‪450‬‬ ‫اﻟﻬﻨﺪﺳﺔ اﻟﻤﺪﻧﻴﺔ‬ ‫اﻟﺮاﺑﻌﺔ‬ ‫‪Steel Bridges‬‬ ‫إﻧﺶ‪403‬‬ ‫‪3‬‬

‫‪High Rise‬‬
‫‪2013 – 2009‬‬ ‫‪40‬‬ ‫اﻟﻬﻨﺪﺳﺔ اﻟﻤﺪﻧﻴﺔ‬ ‫اﻟﺮاﺑﻌﺔ‬ ‫إﻧﺶ ‪446‬‬ ‫‪4‬‬
‫‪Buildings‬‬
‫‪Steel Structures‬‬
‫‪2013 – 2008‬‬ ‫‪30‬‬ ‫اﻟﻬﻨﺪﺳﺔ اﻟﻤﺪﻧﻴﺔ‬ ‫اﻟﺮاﺑﻌﺔ‬ ‫ﻣﺸﺮوع‬ ‫‪5‬‬
‫‪Graduation Project‬‬

‫‪ -2‬ﺗﺪرﻳﺲ ﻣﻘﺮرات اﻟﻤﺮﺣﻠﺔ اﻟﺠﺎﻣﻌﻴﺔ اﻷوﻟﻰ )ﻧﻈﺎم اﻟﺴﺎﻋﺎت اﻟﻤﻌﺘﻤﺪة(‪:‬‬

‫ﻋﺪد‬
‫ﺳﻨﻮات اﻟﺘﺪرﻳﺲ‬ ‫ﻗﺴﻢ اﻟﺘﺪرﻳﺲ‬ ‫اﻟﻔﺮﻗﺔ‬ ‫اﺳﻢ اﻟﻤﻘــــــﺮر‬ ‫رﻣﺰ اﻟﻤﻘﺮر‬ ‫م‬
‫اﻟﻄﻠﺒﺔ‬
‫‪Steel Structures‬‬ ‫‪STR‬‬
‫‪2013 – 2009‬‬ ‫‪50‬‬ ‫‪CEM/STE‬‬ ‫‪Credit Hours‬‬
‫)‪Design (II‬‬ ‫‪N304‬‬
‫‪1‬‬

‫‪STE‬‬
‫‪Spring 2010‬‬ ‫‪14‬‬ ‫‪STE‬‬ ‫‪Credit Hours‬‬ ‫‪Seminar-1‬‬
‫‪N280‬‬
‫‪2‬‬

‫‪STE‬‬
‫‪Fall 2011‬‬ ‫‪11‬‬ ‫‪STE‬‬ ‫‪Credit Hours‬‬ ‫‪Graduation Project-1‬‬
‫‪N480‬‬
‫‪3‬‬

‫‪ -3‬ﺗﺪرﻳﺲ ﻣﻘﺮرات ﻣﺮﺣﻠﺔ اﻟﺪراﺳﺎت اﻟﻌﻠﻴﺎ‪:‬‬

‫ﻋﺪد‬ ‫رﻣﺰ‬
‫ﺳﻨﻮات اﻟﺘﺪرﻳﺲ‬ ‫ﻗﺴﻢ اﻟﺘﺪرﻳﺲ‬ ‫اﻟﻔﺮﻗﺔ‬ ‫اﺳﻢ اﻟﻤﻘـــــﺮر‬ ‫م‬
‫اﻟﻄﻠﺒﺔ‬ ‫اﻟﻤﻘﺮر‬
‫‪High-Rise Steel‬‬
‫‪2013-2008‬‬ ‫‪50‬‬ ‫ﻣﺎﺟﺴﺘﻴﺮ إﻧﺸﺎءات‬ ‫إﻧﺶ ‪651‬‬ ‫‪1‬‬
‫‪Buildings‬‬
‫اﻟﻬﻨﺪﺳﺔ اﻹﻧﺸﺎﺋﻴﺔ‬
‫دﺑﻠﻮم اﻟﻤﻨﺸﺂت‬ ‫‪Special Topics in‬‬
‫‪2008-2007‬‬ ‫‪5‬‬ ‫إﻧﺶ ‪554‬‬ ‫‪2‬‬
‫اﻟﻤﻌﺪﻧﻴﺔ‬ ‫‪Steel Design‬‬

‫‪7/19 ‬‬
 ‫ﻣﺎﻳﻮ ‪2013‬‬ ‫ﺗﻘﺮﻳﺮ د‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور‬

‫‪ -4‬اﻟﺘﻔﺎﻋﻞ ﻣﻊ اﻟﻄﻼب وﺗﻨﻮع أﺳﺎﻟﻴﺐ ﺗﻘﻴﻴﻤﻬﻢ‪:‬‬

‫ﺗﺘﻨﻮع وﺳﺎﺋﻞ اﻟﺘﻔﺎﻋﻞ ﻣﻊ اﻟﻄﻼب وأﺳﺎﻟﻴﺐ ﺗﻘﻴﻴﻤﻬﻢ ﻓﻰ اﻟﻤﻘﺮرات اﻟﺘﻰ ﻳﺘﻮﻟﻰ د‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور ﺗﺪرﻳﺴﻬﺎ ﺣﻴﺚ ﻳﺘﻢ ﺗﻄﺒﻴﻖ‬
‫اﻟﻮﺳﺎﺋﻞ اﻵﺗﻴﺔ‪:‬‬
‫أ‪ -‬اﻻﻣﺘﺤﺎﻧﺎت اﻟﺪورﻳﺔ واﻟﺘﻤﺎرﻳﻦ‪.‬‬
‫ب‪ -‬اﻣﺘﺤﺎن ﻧﺼﻒ اﻟﻔﺼﻞ اﻟﺪراﺳﻰ‪.‬‬
‫ت‪ -‬اﻻﻣﺘﺤﺎﻧﺎت ذات اﻟﻜﺘﺎب اﻟﻤﻔﺘﻮح‪.‬‬
‫ث‪ -‬اﻟﺘﻔﺎﻋﻞ واﻟﻤﻨﺎﻗﺸﺔ اﻟﻌﺎﺻﻔﺔ ﻟﻠﺬهﻦ ﻓﻲ اﻟﻔﺼﻞ‪.‬‬
‫ج‪ -‬اﻟﺘﻔﺎﻋﻞ ﻣﻦ ﺧﻼل اﻟﻨﻤﺬﺟﺔ ﺛﻼﺛﻴﺔ اﻷﺑﻌﺎد اﻟﺘﻲ ﻳﻮﻓﺮهﺎ اﻟﻤﻌﻤﻞ اﻹﻓﺘﺮاﺿﻲ ﺑﺎﻟﻘﺴﻢ‪.‬‬
‫ح‪ -‬اﻟﺘﻘﺎرﻳﺮ اﻟﻔﻨﻴﺔ ﻋﻦ ﺑﻌﺾ اﻟﻤﺸﻜﻼت اﻟﻌﻤﻠﻴﺔ وهﻰ ﺗﻘﺎرﻳﺮ ﻳﻘﻮم اﻟﻄﻼب )ﻓﻲ ﻣﺠﻤﻮﻋﺎت ﻓﻰ ﺣﺪود ‪ 5‬ﻃﻼب‬
‫ﻟﻠﻤﺠﻤﻮﻋﺔ اﻟﻮاﺣﺪة( ﺑﺘﻘﺪﻳﻢ ﺧﻼﺻﺘﻬﺎ ﻓﻰ ﻣﺤﺎﺿﺮات ﻣﺼﻐﺮة أﻣﺎم ﺑﺎﻗﻰ اﻟﻄﻼب‪ .‬و ﻳﺘﻢ اﻟﺘﻘﻴﻴﻢ ﻋﻠﻰ أﺳﺎس اﻟﻤﺤﺘﻮى‬
‫اﻟﻌﻠﻤﻲ إﻟﻰ ﺟﺎﻧﺐ أﺳﻠﻮب اﻟﻌﺮض واﻹﻋﺪاد واﻟﻤﻨﺎﻗﺸﺔ ﻣﻊ اﻟﻤﺠﻤﻮﻋﺎت اﻷﺧﺮى‪.‬‬
‫خ‪ -‬ﻋﻤﻞ زﻳﺎرات ﻣﻴﺪاﻧﻴﺔ ﻟﻤﺸﺎرﻳﻊ ﺗﺤﺖ اﻹﻧﺸﺎء أو ﻟﻤﺼﺎﻧﻊ اﻟﻬﻴﺎآﻞ اﻟﻤﻌﺪﻧﻴﺔ ﺣﻴﺚ ﻳﻘﻮم اﻟﻄﻼب ﺑﺈﻋﺪاد ﺗﻘﺮﻳﺮ ﺣﻮل‬
‫هﺬﻩ اﻟﺰﻳﺎرة وﻳﺘﻢ إﻟﺘﻘﺎط ﺑﻌﺾ اﻟﺼﻮر واﻟﻔﺪﻳﻮهﺎت ﺑﻌﺪ إﺳﺘﺌﺬان اﻟﺠﻬﺔ اﻟﻤﻀﻴﻔﺔ‪.‬‬
‫د‪ -‬دﻋﻮة اﻟﺒﺎﺣﺜﻴﻦ اﻷﺟﺎﻧﺐ اﻟﺰاﺋﺮﻳﻦ ﻟﻠﻜﻠﻴﺔ ﻹﻟﻘﺎء ﻣﺤﺎﺿﺮة ﻋﻦ أﺣﺪ أﺣﺪث اﻟﺘﻘﻨﻴﺎت ﻓﻲ ﻣﺠﺎل اﻟﻬﻨﺪﺳﺔ اﻹﻧﺸﺎﺋﻴﺔ ﺣﻴﺚ‬
‫ﻳﺘﻢ اﻟﺘﻔﺎﻋﻞ واﻟﻤﻨﺎﻗﺸﺔ ﻣﻊ اﻟﻄﻼب )ﻣﺮﺣﻠﺔ اﻟﺪراﺳﺎت اﻟﻌﻠﻴﺎ ﻓﻘﻂ(‪.‬‬
‫ذ‪ -‬ﺗﺤﺪﻳﺪ ﺳﺎﻋﺎت ﻣﻜﺘﺒﻴﺔ ﻟﻠﺮد ﻋﻠﻰ أﺳﺌﻠﺔ اﻟﻄﻼب ﻓﻲ اﻟﻤﻘﺮر‪ .‬آﻤﺎ ﻳﺘﻢ ﻓﻴﻬﺎ إﺳﺘﺪﻋﺎء اﻟﻄﻼب اﻟﺬﻳﻦ ﻳﻼﺣﻆ ﺗﺄﺧﺮهﻢ‬
‫دراﺳﻴًﺎ )ﻣﻦ ﺧﻼل ﺗﺼﺤﻴﺢ اﻹﻣﺘﺤﺎﻧﺎت اﻟﺪورﻳﺔ( وذﻟﻚ ﻹﺗﺨﺎذ ﻣﺎ ﻳﻠﺰم ﻣﻦ ﺧﻄﻮات إﺻﻼﺣﻴﺔ و ﺗﻘﻮﻳﻤﻴﺔ‪.‬‬
‫ر‪ -‬اﻻﻣﺘﺤﺎن اﻟﻨﻬﺎﺋﻰ‪.‬‬

‫‪8/19 ‬‬
 ‫ﻣﺎﻳﻮ ‪2013‬‬ ‫ﺗﻘﺮﻳﺮ د‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور‬

‫‪ -5‬اﻟﻤﺴﺎهﻤﺔ ﻓﻰ ﺗﻄﻮﻳﺮ اﻟﻤﻘﺮرات‪:‬‬

‫‪ 1-5‬إﻋﺪاد ﻣﻠﻔﺎت اﻟﻤﻘﺮرات‪ :‬ﺗﻢ إﻋﺪاد ﻣﻠﻔﺎت اﻟﻤﻘﺮرات اﻟﻤﺴﺌﻮل ﻋﻦ ﺗﺪرﻳﺴﻬﺎ اﻟﻌﻀﻮ آﻤﺎ ﻳﺠﺮى ﺗﺤﺪﻳﺜﻬﺎ ﻣﻦ ﻋﺎم إﻟﻰ ﺁﺧﺮ و‬
‫اﻟﺠﺪول اﻟﺘﺎﻟﻰ ﻳﻮﺿﺢ هﺬﻩ اﻟﻤﻘﺮرات‪:‬‬

‫اﻟﺒﺮﻧﺎﻣﺞ‬ ‫اﺳﻢ اﻟﻤﻘــــﺮر‬ ‫رﻣﺰ اﻟﻤﻘﺮر‬ ‫م‬

‫‪CEM and STE‬‬
‫‪Programs (Credit‬‬ ‫)‪Steel Structures Design (II‬‬ ‫‪STR N304‬‬ ‫‪1‬‬
‫)‪Hours‬‬
‫‪STE Program‬‬
‫‪Seminar-1‬‬ ‫‪STE N280‬‬ ‫‪2‬‬
‫)‪(Credit Hours‬‬
‫‪Civil Eng. Dept.‬‬
‫‪Elective Course “3” – Steel Structures‬‬ ‫إﻧﺶ ‪446‬‬ ‫‪3‬‬
‫‪4th Year Civil‬‬

‫ﻣﺎﺟﺴﺘﻴﺮ إﻧﺸﺎءات‬ ‫‪High-Rise Steel Buildings‬‬ ‫إﻧﺶ ‪651‬‬ ‫‪4‬‬

‫‪ 2-5‬إﻋﺪاد اﻟﻤﻘﺮرات اﻹﻟﻜﺘﺮوﻧﻴﺔ‪ :‬ﺣﻀﺮ اﻟﺴﻴﺪ اﻟﺪآﺘﻮر‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور ورﺷﺔ ﻋﻤﻞ ﺑﻤﺮآﺰ اﻟﺘﻌﻠﻴﻢ اﻹﻟﻜﺘﺮوﻧﻲ ﺑﻜﻠﻴﺔ‬
‫اﻟﻬﻨﺪﺳﺔ ﺟﺎﻣﻌﺔ اﻟﻘﺎهﺮة )ﺑﺘﺎرﻳﺦ ‪ 17‬دﻳﺴﻤﺒﺮ ‪ (2008‬ﻋﻦ إﺳﺘﺨﺪام ﺑﺮﻧﺎﻣﺞ ‪ Moodle‬ﻓﻲ إﻋﺪاد اﻟﻤﻘﺮر اﻹﻟﻜﺘﺮوﻧﻲ ﻷﻋﻀﺎء‬
‫هﻴﺌﺔ اﻟﺘﺪرﻳﺲ وﺗﻢ إﻋﺪاد اﻟﻤﺤﺘﻮى اﻹﻟﻜﺘﺮوﻧﻰ ﻟﻠﻤﻘﺮرات اﻟﺘﺎﻟﻴﺔ اﻟﺘﻰ ﻳﻘﻮم ﺑﺘﺪرﻳﺴﻬﺎ اﻟﻌﻀﻮ وﺗﺤﻤﻴﻠﻬﺎ ﻋﻠﻰ ﻣﻮﻗﻊ‬
‫‪: www.egypteducation.org‬‬

‫اﻟﺒﺮﻧﺎﻣﺞ‬ ‫اﺳﻢ اﻟﻤﻘــــﺮر‬ ‫رﻣﺰ اﻟﻤﻘﺮر‬ ‫م‬

‫‪Civil Eng. Dept.‬‬

‫‪Elective Course “3” – Steel Structures‬‬ ‫إﻧﺶ ‪446‬‬ ‫‪1‬‬
‫‪4th Year Civil‬‬

‫ﻣﺎﺟﺴﺘﻴﺮ إﻧﺸﺎءات‬ ‫‪High-Rise Steel Buildings‬‬ ‫إﻧﺶ ‪651‬‬ ‫‪2‬‬

‫‪ -6‬اﻟﻤﺸﺎرآﺔ ﻓﻰ أﻋﻤﺎل اﻻﻣﺘﺤﺎﻧﺎت‪:‬‬

‫اﻹﻟﺘﺰام ﺑﺘﻮﻗﻴﺘﺎت ﺗﺴﻠﻴﻢ أﺳﺌﻠﺔ اﻻﻣﺘﺤﺎﻧﺎت ﻓﻰ اﻟﻤﻮاﻋﻴﺪ اﻟﺘﻰ ﺗﺤﺪدهﺎ إدارة اﻟﻜﻠﻴﺔ )‪ 48‬ﺳﺎﻋﺔ ﻗﺒﻞ اﻻﻣﺘﺤﺎن ﻋﻠﻰ اﻷﻗﻞ(‪.‬‬
‫اﻹﻟﺘﺰام ﺑﺘﻮﻗﻴﺘﺎت ﺗﺴﻠﻴﻢ أﻋﻤﺎل اﻟﺴﻨﺔ ﻓﻰ اﻟﻤﻮاﻋﻴﺪ اﻟﺘﻰ ﺗﺤﺪدهﺎ إدارة اﻟﻜﻠﻴﺔ‪.‬‬
‫اﻹﻟﺘﺰام ﺑﺤﻀﻮر اﻟﻤﺮاﻗﺒﺎت اﻟﻤﻮآﻠﺔ إﻟﻴﻪ ﺳﻮاء ﻓﻰ اﻻﻣﺘﺤﺎﻧﺎت اﻟﺪورﻳﺔ أو اﻻﻣﺘﺤﺎﻧﺎت اﻟﻔﺼﻠﻴﺔ أو ﻏﻴﺮهﺎ‪.‬‬
‫اﻹﻟﺘﺰام ﺑﺘﺼﺤﻴﺢ أوراق اﻹﺟﺎﺑﺔ و ﺗﺴﻠﻴﻤﻬﺎ ﻓﻰ اﻟﻤﻮاﻋﻴﺪ اﻟﻤﺤﺪدة‪.‬‬

‫‪9/19 ‬‬
 ‫ﻣﺎﻳﻮ ‪2013‬‬ ‫ﺗﻘﺮﻳﺮ د‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور‬

‫‪ -7‬ﺗﻘﻴﻴﻢ اﻟﻄﻼب‪:‬‬
‫وﺣﺪة ﺟﻮدة اﻟﺘﻌﻠﻴﻢ ﺑﺎﻟﻜﻠﻴﺔ ﺗﻘﻮم ﺑﺘﻮزﻳﻊ اﺳﺘﺒﻴﺎﻧﺎت ﻟﻠﺮأى ﻗﺒﻴﻞ ﻧﻬﺎﻳﺔ آﻞ ﻓﺼﻞ دراﺳﻰ ﻻﺳﺘﻄﻼع ﺁراء اﻟﻄﻠﺒﺔ ﻓﻰ ﺑﻌﺾ اﻟﻨﻘﺎط اﻟﻤﺘﻌﻠﻘﺔ‬
‫ﺑﺄداء أﻋﻀﺎء هﻴﺌﺔ اﻟﺘﺪرﻳﺲ وﻣﻌﺎوﻧﻴﻬﻢ وآﺎﻧﺖ ﻧﺘﻴﺠﺔ ﺗﺤﻠﻴﻞ ﺁراء ﻃﻠﺒﺔ اﻟﻤﻘﺮر )‪ (STR N304‬ﺣﺼﻮل اﻟﺴﻴﺪ اﻟﺪآﺘﻮر‪ /‬ﻣﺤﻤﺪ‬
‫ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور ﻋﻠﻰ )‪ (3.65/4‬آﻤﺘﻮﺳﻂ ﻋﻦ ﺧﻤﺴﺔ أﻋﻮام ﺗﺪرﻳﺴﻴﺔ )‪.(2013-2009‬‬

‫‪10/19 ‬‬
‫ﻣﺎﻳﻮ ‪2013‬‬ ‫ﺗﻘﺮﻳﺮ د‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور‬

‫ﺛﺎﻟﺜ ًﺎ‪ :‬اﻷﻧﺸﻄﺔ اﻟﺒﺤــــﺜﻴﺔ‬

‫‪11/19 ‬‬
‫ﻣﺎﻳﻮ ‪2013‬‬ ‫ﺗﻘﺮﻳﺮ د‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور‬

‫ﺗﺸﻤﻞ اﻷﻧﺸﻄﺔ اﻟﺒﺤﺜﻴﺔ ﻟﻠﺪآﺘﻮر‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور ﻣﺎ ﻳﻠﻰ‪:‬‬

‫‪ -1‬رﺳﺎﺋﻞ اﻟﻤﺎﺟﺴﺘﻴﺮ اﻟﺘﻰ ﺗﻢ اﻹﺷﺮاف ﻋﻠﻴﻬﺎ‪:‬‬

‫ﻋﻨﻮان اﻟﺮﺳـــــﺎﻟﺔ‬ ‫ﻣﻮاﻓﻘﺔ اﻟﺠﺎﻣﻌﺔ‬ ‫اﻹﺳــــﻢ‬ ‫م‬

‫‪Assessment of Force Reduction Factor for‬‬

‫‪Steel Frames in the Egyptian Code‬‬
‫‪7/11/2009‬‬ ‫ﻣﻬﺎ ﻣﺪﺛﺮ ﺣﺴﻦ‬ ‫‪1‬‬
‫ﺗﻘﺪﻳﺮ ﻣﻌﺎﻣﻞ اﻟﺘﺨﻔﻴﺾ اﻟﺰﻟﺰاﻟﻲ ﻟﻺﻃﺎرات اﻟﻤﻌﺪﻧﻴﺔ اﻟﻤﻘﺎوﻣﺔ‬
‫ﻟﻠﻌﺰوم ﻓﻲ اﻟﻜﻮد اﻟﻤﺼﺮي‬

‫‪ِAnalytical Comparison of Pushover Load‬‬

‫‪Patterns for Seismic Evaluation‬‬
‫‪of Medium–Rise RC Frames‬‬ ‫راﻧﻴﺎ ﻓﺎروق ﻣﺤﻤﺪ‬
‫‪7/7/2010‬‬ ‫‪2‬‬
‫ﻣﻘﺎرﻧﺔ ﺗﺤﻠﻴﻠﻴﺔ ﻷﻧﻤﺎط ﺣﻤﻞ اﻟﺪﻓﻊ اﻟﺠﺎﻧﺒﻰ اﻟﻤﺴﺘﺨﺪﻣﺔ ﻓﻰ اﻟﺘﻘﻴﻴﻢ‬ ‫ﻣﺤﻤﺪ أﺑﻮداﻏﺮ‬
‫اﻟﺰﻟﺰاﻟﻰ ﻟﻺﻃﺎرات اﻟﺨﺮﺳﺎﻧﻴﺔ‬
‫اﻟﻤﺴﻠﺤﺔ ﻣﺘﻮﺳﻄﺔ اﻻرﺗﻔﺎع‬

‫‪Local Buckling Coefficient for Web of I-Section‬‬

‫‪under Compressive Stresses‬‬ ‫ﻣﺤﻤﺪ ﻣﺤﻤﺪ ﺳﻌﻴﺪ‬
‫‪12/7/2011‬‬ ‫‪3‬‬
‫ﻣﻌﺎﻣﻞ اﻹﻧﺒﻌﺎج اﻟﻤﻮﺿﻌﻲ ﻟﻌﺼﺐ ﻗﻄﺎع ﺷﻜﻞ‪ I-‬ﻣﻌﺮض ﻹﺟﻬﺎد‬ ‫اﻟﻌﺎدﻟﻲ‬
‫ﺿﻐﻂ ﻣﻨﺘﻈﻢ‬

‫‪Dynamic Identification for Linear Systems‬‬

‫‪using Numerical and Analytical Approaches‬‬ ‫ﺣﺎزم ﺣﺴﺎم اﻟﺪﻳﻦ‬
‫‪7/8/2011‬‬ ‫‪4‬‬
‫اﻷﻧﻮر‬
‫ﺗﻌﻴﻴﻦ ﻣﻌﺎﻣﻞ اﻹﺿﻤﺤﻼل ﺑﺈﺳﺘﺨﺪام اﻟﻄﺮق اﻟﺘﺤﻠﻴﻠﻴﺔ واﻟﻤﻌﻤﻠﻴﺔ‬

‫‪12/19 ‬‬
‫ﻣﺎﻳﻮ ‪2013‬‬ ‫ﺗﻘﺮﻳﺮ د‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور‬

‫‪ -2‬اﻟﻄﻼب اﻟﺠﺎرى اﻹﺷﺮاف ﻋﻠﻴﻬﻢ‪:‬‬

‫اﻟﺪرﺟﺔ‬ ‫ﺗﺎرﻳﺦ اﻟﻘﻴﺪ‬ ‫اﻹﺳــــﻢ‬ ‫م‬

‫‪2005‬‬ ‫ﻣﺤﻤﺪ ﺣﻠﻤﻰ أﺣﻤﺪ آﺘﺎﻧﺔ‬ ‫‪1‬‬

‫‪2007‬‬ ‫أﺣﻤﺪ ﻋﺼﺎم اﻟﺪﻳﻦ ﻓﺘﺤﻲ‬ ‫‪2‬‬

‫‪2007‬‬ ‫ﻋﻤﺮو ﻣﺤﻤﻮد ﻳﻮﺳﻒ‬ ‫‪3‬‬

‫‪2007‬‬ ‫راﻣﻰ ﻋﺎدل دﻳﺎب ﻣﺤﻤﺪ‬ ‫‪4‬‬

‫ﻣﺎﺟﺴﺘﻴﺮ‬ ‫‪2007‬‬ ‫ﻣﺤﻤﺪ ﻧﺼﺮ ﻋﺒﺪ اﻟﻤﻨﻌﻢ‬ ‫‪5‬‬

‫‪2007‬‬ ‫ﻣﺆﻣﻦ ﻣﺤﻤﻮد ﻣﺤﻤﺪ‬ ‫‪6‬‬

‫‪2008‬‬ ‫ﺷﺮﻳﻒ ﻋﻤﺮ اﻟﻔﺎروق‬ ‫‪7‬‬

‫‪2009‬‬ ‫ﻣﺤﻤﺪ ﻋﻠﻰ اﻟﺼﻔﺘﻰ‬ ‫‪8‬‬

‫‪2009‬‬ ‫راﻣﻲ اﻟﺴﻴﺪ إﺑﺮاهﻴﻢ‬ ‫‪9‬‬

‫‪ -3‬اﻟﺪورات اﻟﺘﺪرﻳﺒﻴﺔ اﻟﺘﻲ ﺗﻢ ﺣﻀﻮرهﺎ‪:‬‬

‫اﻟﻔﺘﺮة‬ ‫ﻣﻘﺮ اﻻﻧﻌﻘﺎد‬ ‫اﺳـــــﻢ اﻟﺪورة‬ ‫م‬

‫‪28-30/12/2009‬‬ ‫اﻟﻨﺸﺮ اﻟﻌﻠﻤﻰ‬ ‫‪1‬‬
‫‪17-19/5/2010‬‬ ‫ﺗﻨﻈﻴﻢ اﻟﻤﺆﺗﻤﺮات‬ ‫‪2‬‬
‫‪11-13/10/2010‬‬ ‫ﻧﻈﺎم اﻟﺴﺎﻋﺎت اﻟﻤﻌﺘﻤﺪة‬ ‫‪3‬‬
‫ﻣﺮآﺰ ﺗﻨﻤﻴﺔ ﻗﺪرات أﻋﻀﺎء هﻴﺌﺔ‬
‫‪08-10/11/2010‬‬ ‫اﻟﺘﺪرﻳﺲ و اﻟﻘﻴﺎدات – ﺟﺎﻣﻌﺔ اﻟﻘﺎهﺮة‬ ‫ﻧﻈﻢ اﻹﻣﺘﺤﺎﻧﺎت وﺗﻘﻮﻳﻢ اﻟﻄﻼب‬ ‫‪4‬‬
‫‪21-23/03/2011‬‬ ‫ﻣﻌﺎﻳﻴﺮ اﻟﺠﻮدة ﻓﻲ اﻟﻌﻤﻠﻴﺔ اﻟﺘﻌﻠﻴﻤﻴﺔ‬ ‫‪5‬‬
‫‪19-21/12/2011‬‬ ‫اﻟﺘﺨﻄﻴﻂ اﻻﺳﺘﺮاﺗﻴﺠﻰ‬ ‫‪6‬‬
‫‪24-26/04/2012‬‬ ‫إدارة ﻓﺮﻳﻖ اﻟﺒﺤﺚ‬ ‫‪7‬‬

‫‪13/19 ‬‬
2013 ‫ﻣﺎﻳﻮ‬ ‫ ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور‬/‫ﺗﻘﺮﻳﺮ د‬

:‫ اﻟﻤﺆﺗﻤﺮات اﻟﻌﻠﻤﻴﺔ‬-4
:‫ ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور ﻓﻰ اﻟﻤﺆﺗﻤﺮات اﻟﺘﺎﻟﻴﺔ‬/‫ﺷﺎرك اﻟﺴﻴﺪ اﻟﺪآﺘﻮر‬

‫اﻟﻤﻜﺎن‬ ‫اﺳﻢ اﻟﻤﺆﺗﻤﺮ‬ ‫رﻗﻢ‬

– ‫اﻟﺠﺎﻣﻌﺔ اﻟﺒﺮﻳﻄﺎﻧﻴﺔ ﻓﻲ ﻣﺼﺮ‬ (www.amaav.org) :‫اﻟﻤﺆﺗﻤﺮ اﻟﺪوﻟﻲ ﺑﺎﻟﺠﺎﻣﻌﺔ اﻟﺒﺮﻳﻄﺎﻧﻴﺔ‬ 1

2009 ‫ﻳﻨﺎﻳﺮ‬
Advanced Materials for Application in Acoustics and
Vibrations

‫آﻠﻴﺔ اﻟﻬﻨﺪﺳﺔ – ﺟﺎﻣﻌﺔ ﻋﻴﻦ ﺷﻤﺲ‬ :‫اﻟﻤﺆﺗﻤﺮ اﻟﺪوﻟﻲ اﻟﺜﺎﻟﺚ ﻋﺸﺮ ﻟﻠﻬﻨﺪﺳﺔ اﻹﻧﺸﺎﺋﻴﺔ ﺑﺠﺎﻣﻌﺔ ﻋﻴﻦ ﺷﻤﺲ‬ 2
2009 ‫ دﻳﺴﻤﺒﺮ‬-
13th International Conference on Structural and
Geotechnical Engineering
(http://www.icsge2009.com/)

Hilton Ramses - International Workshop on Wind Energy 3

Cairo - March 2010 Development

Housing & Building American Society of Civil Engineers (ASCE) 4

National Research 6th International Engineering and
Center (HBRC) Construction Conference - Advances in Affordable
Cairo - June 2010 Housing & Green Construction (www.iecc6.org)

Ohrid, Republic of 14th European Conference on Earthquake 5

Macedonia Engineering (www.14ecee.mk)
Sept. 2010

14/19 
 ‫ﻣﺎﻳﻮ ‪2013‬‬ ‫ﺗﻘﺮﻳﺮ د‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور‬

‫‪ -5‬أﻧﺸﻄﺔ ﺑﺤﺜﻴﺔ أﺧﺮى‪:‬‬

‫‪ −‬ﺣﺎﺻﻞ ﻋﻠﻰ زﻣﺎﻟﺔ ﻣﺎ ﺑﻌﺪ اﻟﺪآﺘـﻮراﻩ ﻣﻦ ﺟﻤﻌﻴﺔ ﺗﻄﻮﻳﺮ اﻟﻌﻠﻮم اﻟﻴﺎﺑﺎﻧﻴﻪ ‪ -‬ﻃﻮآــﻴﻮ‪ -‬اﻟﻴــﺎﺑﺎن ‪2007‬‬
‫‪Japan Society for Promotion of Science JSPS‬‬
‫‪ −‬ﻋﻀﻮ اﻹﺗﺤﺎد اﻟﺪوﻟﻲ )‪ International Alliance for Interoperability (IAI‬وﻣﺆﺳﺲ ﻣﺸﺮوع ‪ST-7‬‬
‫داﺧﻞ ‪ IAI‬ﻟﺪﻣﺞ اﻟﺘﺤﻠﻴﻞ اﻟﺪﻳﻨﺎﻣﻴﻜﻲ داﺧﻞ اﻟﻨﻤﻮذج اﻟﻤﻌﻠﻮﻣﺎﺗﻲ ﻟﻠﻤﺒﺎﻧﻲ )‪Building Information Model (BIM‬‬
‫‪http://www.buildingsmart-tech.org/future-extensions‬‬
‫‪ −‬ﻣﺤﻜﻢ ﻷﺑﺤﺎث ﻋﻠﻤﻴﺔ ﻓﻲ اﻟﻤﺠﻠﺔ اﻟﺪوﻟﻴﺔ ”‪“Computer-Aided Design, ELSEVIER‬‬
‫)‪ (ITAC – Information Technology Academia Collaboration‬ﻣﺒﺎدرة‬ ‫‪ −‬ﻣﺤﻜﻢ ﻟﻤﺸﺮوﻋﺎت ﺑﺤﺜﻴﺔ ﻓﻲ‬
‫دﻋﻢ اﻟﺘﻌﺎون اﻟﺒﺤﺜﻲ ﺑﻴﻦ اﻟﺸﺮآﺎت واﻟﺠﺎﻣﻌﺎت‪/‬اﻟﻤﺮاآﺰ اﻟﺒﺤﺜﻴﺔ‪.‬‬

‫‪ −‬ﻣﺸﺎرك ﻓﻲ إﻋﺪاد ﻣﻘﺘﺮح ﻟﻤﺸﺮوع ﺑﺤﺜﻲ )آﻠﻴﺔ اﻟﻬﻨﺪﺳﺔ ﺟﺎﻣﻌﺔ اﻟﻘﺎهﺮة‪ ،‬اﻟﺠﺎﻣﻌﺔ اﻟﺒﺮﻳﻄﺎﻧﻴﺔ ﻓﻲ ﻣﺼﺮ‪ ،‬اﻟﻬﻴﺌﺔ اﻟﻌﺮﺑﻴﺔ‬
‫ﻟﻠﺘﺼﻨﻴﻊ( ﻣﻘﺪم ﻟﺼﻨﺪوق اﻟﻌﻠﻮم واﻟﺘﻨﻤﻴﺔ اﻟﺘﻜﻨﻮﻟﻮﺟﻴﺔ )‪ (STDF‬و ذﻟﻚ ﺑﺘﺎرﻳﺦ ﻣﺎﻳﻮ ‪ 2010‬ﺑﻌﻨﻮان‪:‬‬

‫‪“Wind Turbines Made in Egypt: Research, Development and Manufacturing of a‬‬

‫”‪300KW Turbine‬‬
‫‪CALL NUMBER: TC/1/ENERGY/2009/RENEWABLE‬‬
‫‪CALL NAME: RENEWABLE ENERGY RESEARCH PROGRAM‬‬
‫‪CALL SUBJECT CATEGORY: WIND ENERGY‬‬

‫‪15/19 ‬‬
‫ﻣﺎﻳﻮ ‪2013‬‬ ‫ﺗﻘﺮﻳﺮ د‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور‬

‫راﺑﻌ ًﺎ‪ :‬اﻷﻧﺸﻄـــﺔ اﻟﺠﺎﻣﻌﻴﺔ‬

‫‪16/19 ‬‬
 ‫ﻣﺎﻳﻮ ‪2013‬‬ ‫ﺗﻘﺮﻳﺮ د‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور‬

‫ﺗﺸﻤﻞ اﻷﻧﺸﻄﺔ اﻟﺠﺎﻣﻌﻴﺔ ﻟﻠﺪآﺘﻮر‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور ﻣﺎ ﻳﻠﻰ‪:‬‬

‫ﻼ ﻟﻘﺴﻢ اﻟﻬﻨﺪﺳﺔ اﻹﻧﺸﺎﺋﻴﺔ ﻓﻲ اﻟﻔﺘﺮة ﻣﻦ ‪.2010-2008‬‬
‫اﻟﻤﺸﺎرآﺔ ﻓﻲ أﻋﻤﺎل ﻟﺠﻨﺔ اﻟﻤﻜﺘﺒﺔ ﺑﺎﻟﻜﻠﻴﺔ ﻣﻤﺜ ً‬ ‫‪.1‬‬

‫اﻟﻤﺸﺎرآﺔ ﻓﻲ أﻋﻤﺎل ﻟﺠﻨﺔ اﻟﻤﻌﻤﻞ اﻹﻓﺘﺮاﺿﻲ ﺑﺎﻟﻘﺴﻢ ﻓﻲ اﻟﻔﺘﺮة ﻣﻦ ‪ 2009-2008‬ﺧﻼل ﻓﺘﺮة إﻧﺸﺎء وﺗﺄﺳﻴﺲ اﻟﻤﻌﻤﻞ‪.‬‬ ‫‪.2‬‬

‫اﻟﻤﺸﺎرآﺔ ﻓﻲ أﻋﻤﺎل ﻟﺠﻨﺔ اﻟﻤﻮﻗﻊ اﻹﻟﻜﺘﺮوﻧﻲ ﻟﻘﺴﻢ اﻟﻬﻨﺪﺳﺔ اﻹﻧﺸﺎﺋﻴﺔ ﻓﻲ اﻟﻔﺘﺮة ﻣﻦ ‪.2009-2008‬‬ ‫‪.3‬‬

‫اﻟﻤﺸﺎرآﺔ ﻓﻲ إﻋﺪاد ﻣﻘﺘﺮح ﺑﺮﻧﺎﻣﺞ اﻟﻬﻨﺪﺳﺔ اﻹﻧﺸﺎﺋﻴﺔ )‪ (STE‬ﻹدراﺟﻪ ﺿﻤﻦ ﺑﺮاﻣﺞ ﻧﻈﺎم اﻟﺴﺎﻋﺎت اﻟﻤﻌﺘﻤﺪة و ﻗﺪ ﺗﻢ ﻗﺒﻮل‬ ‫‪.4‬‬
‫اﻟﻤﻘﺘﺮح و ﺗﻔﻌﻴﻞ اﻟﺒﺮﻧﺎﻣﺞ‪.‬‬

‫اﻟﻤﺸﺎرآﺔ ﻓﻲ إﻋﺪاد ﻻﺋﺤﺔ ﺑﺮﻧﺎﻣﺞ اﻟﻬﻨﺪﺳﺔ اﻹﻧﺸﺎﺋﻴﺔ )‪ (STE‬ﺿﻤﻦ ﺑﺮاﻣﺞ ﻧﻈﺎم اﻟﺴﺎﻋﺎت اﻟﻤﻌﺘﻤﺪة و ﻗﺪ ﺗﻢ ﺗﻔﻌﻴﻞ اﻟﺒﺮﻧﺎﻣﺞ‬ ‫‪.5‬‬
‫ﻓﻲ ﻇﻞ هﺬﻩ اﻟﻼﺋﺤﺔ‪.‬‬

‫اﻟﻤﺸﺎرآﺔ ﻓﻲ إﻋﺪاد ﺑﻌﺾ اﻟﺪورات اﻟﻌﻠﻤﻴﺔ اﻟﺘﻲ ﻳﻘﺪﻣﻬﺎ اﻟﻤﻌﻤﻞ اﻹﻓﺘﺮاﺿﻲ ﻟﻄﻼب اﻟﻘﺴﻢ ﻓﻲ ﻓﺘﺮة اﻹﺟﺎزة‪.‬‬ ‫‪.6‬‬

‫اﻟﻤﺸﺎرآﺔ ﻓﻲ ﺗﻮﻓﻴﺮ ﻓﺮص ﻟﻠﺘﺪرﻳﺐ اﻟﺼﻴﻔﻲ ﻟﻄﻼب ﻧﻈﺎم اﻟﻔﺼﻠﻴﻴﻦ وﻧﻈﺎم اﻟﺴﺎﻋﺎت اﻟﻤﻌﺘﻤﺪة‪.‬‬ ‫‪.7‬‬

‫اﻟﻤﺸﺎرآﺔ ﻓﻲ إﻋﺪاد ﺗﻘﺮﻳﺮ ﻋﻦ اﻟﺤﺎﻟﺔ اﻹﻧﺸﺎﺋﻴﺔ ﻟﻘﻨﺎﻃﺮ دﻳﺮوط ﺑﺎﻟﻮﺟﺔ اﻟﻘﺒﻠﻲ ﻓﻲ ﻣﺼﺮ ﻓﻲ ﺿﻮء اﻟﻔﺤﻮﺻﺎت واﻹﺳﺘﻨﺘﺎﺟﺎت‬ ‫‪.8‬‬
‫اﻟﺘﻲ ﻗﺎﻣﺖ ﺑﻬﺎ ﻣﻨﻈﻤﺔ اﻟﺠﺎﻳﻜﺎ اﻟﻴﺎﺑﺎﻧﻴﺔ وﺑﺘﻜﻠﻴﻒ ﻣﻦ وزارة اﻟﺮي واﻟﻤﻮارد اﻟﻤﺎﺋﻴﺔ ﻟﻠﻜﻠﻴﺔ وذﻟﻚ ﺑﺘﺎرﻳﺦ ﻣﺎﻳﻮ ‪ 2012‬ﺑﻌﻨﻮان‪.‬‬
‫‪“Rehabilitation of Dirout Group of Regulators (DGR) – Commentary on JICA Report by Cairo‬‬
‫”‪University, Faculty of Engineering‬‬

‫اﻟﻤﺸﺎرآﺔ ﻓﻲ اﻟﺘﺼﻤﻴﻢ واﻹﺷﺮاف ﻋﻠﻰ ﺗﻨﻔﻴﺬ ﻣﺸﺮوﻋﺎت ﺻﻨﺎﻋﻴﺔ ﻓﻌﺎﻟﺔ ﻓﻲ اﻟﻤﺠﺘﻤﻊ وﻣﻨﻬﺎ ﻋﻠﻰ ﺳﺒﻴﻞ اﻟﻤﺜﺎل اﻵﺗﻲ‪:‬‬ ‫‪.9‬‬

‫‪17/19 ‬‬
2013 ‫ﻣﺎﻳﻮ‬ ‫ ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور‬/‫ﺗﻘﺮﻳﺮ د‬

‫ﻣﻜﺎن اﻟﺘﻨﻔﻴﺬ‬ ‫اﻟﻨﺸﺎط أو ﺻﻔﺘﻪ‬ ‫رﻗﻢ‬

‫اﻟﺴﻮﻳﺲ‬ Suez Steel Company (SSC): 1
- Steel Making Plant
- Direct-Reduced Iron (DRI) Plant
- Rolling Mill Plant
- Material Handling Systems (Silos and
Conveyors)
- Water Treatment Plant
‫أﺳﻴﻮط‬ Building Material Industry Company (BMIC): 2
- Assuit Cement Plant – complete line
‫اﻻﺳﻜﻨﺪرﻳﺔ‬ Alexandria Sugar Company (ASC): 3
- Beet Sugar Process Buildings
- Workshop and Warehouses
- Fence and Gates
‫اﻟﻌﻴﻦ اﻟﺴﺨﻨﺔ‬ El-Sewedy Cement Company (ESCC): 4
- Cement Plant – complete line
‫اﻟﻌﺎﺷﺮ ﻣﻦ رﻣﻀﺎن‬ EMAS Glass Factory 5
- Process Building
- Batch Plant
- Workshop and Warehouses
‫اﻟﻌﺎﺷﺮ ﻣﻦ رﻣﻀﺎن‬ Pyramids Industrial Park (PIP) 6
- Administration Building
- Water Tanks and Substations
- Fence and Gates
‫اﻟﺴﺎدس ﻣﻦ أآﺘﻮﺑﺮ‬ Edita Food Industries Company – PIIP Park 7
- Process Building
- Utilities and Administration Buildings
- Fence and Gates
‫اﻟﺴﺎدس ﻣﻦ أآﺘﻮﺑﺮ‬ General Motors Egypt (GM-Egypt) 8
- Flat Top Chain Conveyor in GM
Egypt Truck Line.
- Control room.
‫اﻟﺴﺎدات‬ Uniboard Paper Factory 9
- Board Machine Building
- Finishing and Storage Buildings
- Stock Preparation Building
- Workshop and Warehouses
- Fence and Gates
‫اﻟﺴﺎدس ﻣﻦ أآﺘﻮﺑﺮ‬ VACSERA PIOVAC 10
- Therapeutic Solutions Plant

18/19 
‫ﻣﺎﻳﻮ ‪2013‬‬ ‫ﺗﻘﺮﻳﺮ د‪ /‬ﻣﺤﻤﺪ ﺣﺴﺎﻧﻴﻦ ﻣﺤﻤﺪ ﺳﺮور‬

‫ﺻﻮر ﻟﺒﻌﺾ اﻟﻤﺸﺎرﻳﻊ اﻟﺴﺎﻟﻒ ذآﺮهﺎ‬

‫‪19/19 ‬‬