Nivotemp NT 64

Level and temperature switch

with display NV64D
§ highly visible LED display with status indication of the
switching outputs, turnable 270°
§ menu structure based on the VDMA guideline 24574 ff.
§ 2 wireless, adjustable level contacts
§ up to 4 programmable temperature switching outputs
§ alternatively continuous temperature output signal
(current or voltage adjustable) plus one free program-
mable switching output
§ output characteristic for switching output adjustable as
window or hysteresis
§ two switching outputs adjustable as frequency output (1
to 100 Hz)
§ Min/Max memory, logbook function

Level and temperature switch NT 64

§ wireless, adjustable level contacts
§ flange according to DIN 24557 part 2
§ various connector options
§ up to 4 level contacts or 2 outputs for level plus
RTD or analogue output for temperature
§ reliable, dynamic float system
§ stainless steel option for temperatures up to
150°C
§ probe length up to 1.5 m (longer on request)
§ 24 V standard, 230 V on request

Bühler Technologies GmbH

D - 40880 Ratingen, Harkortstr. 29
DE 10 0209
05/2009
Tel.: + 49 (0) 2102 / 49 89-0 Fax: + 49 (0) 2102 / 49 89-20
Page 1/6 Internet: www.buehler-technologies.com
e-mail: [email protected]
Technical data NT 64
Basic unit

8 at VA with stilling tube

operating pressure max. 1 bar
operating temperature -20 °C to +80 °C
GI-cork-
min. spec. density of fluid 0,80 kg/dm³ with float SK 601 gasket

65
0,85 kg/dm³ with float SK 221
length 280, 370, 500

F000009D
L1= min 30
first contact
Material / Design MS VA

4
float hard PU (SK 601) 1.4571 (SK 221)
immersion tube brass 1.4571
flange (DIN 24557) PA PA

L=280 / 370 / 500

L2= min 70
Level contacts K W
function fO / fC* change over

stilling tube
max. quantity 4 2

optional
max. voltage 30 V 30 V
max. current 0,5 A 0,5 A
max. contact load 10 VA 20 VA ø50 (MS)
min. distance of contact 40 mm 40 mm last ø60,3 (VA)
contact

min. 60
*fO= falling opener / fC = falling closer

included in delivery
fixing bolts (6 pieces) and GI cork-gasket

3,5
ø44
Temperature contact TK
max. voltage 30 V
max. current 2,5 A
max. contact load 100 VA O

Function NC NO
P Installation dimension
switching point °C 50 / 60 / 70 / 80 50 / 60 / 70 / 80
min. Ø60
switching point tolerance ±3K ±3K min. Ø61 with
max. hysteresis 10 K ± 3 K 10 K ± 3 K T stilling tube
NC = opener / NO = closer (figures at increasing temperature)

I
Temperature sensor Pt 100 class B, DIN EN 60751
73
90

tolerance ±0,8°C
O 6xØ6
Temperature transmitter KT
probe element Pt 100 class B, DIN EN 60751 according to DIN 24557 part 2
N
measuring range 0 °C to +100 °C
operating voltage (UB) 10 - 30 V DC
output 4 - 20 mA A
load W max. (UB -7,5 V) / 0,02 A
other measurement ranges on request
L
Option
SSR - stilling tube material same as immersion tube
Connector M3 S6 M12 (base) 2 x M12 (base)
3 pol. + PE 6 pol. + PE 4 pol. 2 x 4 pol.
DIN EN175301-803 DIN EN 175201-804
max. voltage 30 V AC/DC 30 V AC/DC 30 V DC 30 V DC
protection class IP 65 IP 65 IP 67** IP 67**
cable connection PG 11 M20 x 1,5
37 47 M12x1 M12x1
M12x1
65
65

A B
58
45

F000047X F000048X F000326X

F000046X
max.quantity of contacts
- Level/Temp. contact 1 x K / 1 x TK 3 x K / 1 x TK 1 x K / 1 x TK 3 x K 10 / 1 x TK
-/- 1 x W / 1 x TK -/- 1 x W11 / 1 x TK

- level only 2xK 4xK 2xK 4xK

1xW 2xW 1xW 2xW
**with casted connector head / on request other connectors

DE 10 0209
05/2009
Page 2/6 we reserve the right to amend specifications
 Product code for NT 64
NT 64-
Series
Nivotemp NT 64

Design
MS brass Accessories
VA float and immersion tube VA SSR = stilling tube

Connector Temperature
M3
S6 Pt 100 = Temperature sensor (RTD)
M12 KT = Temperature transmitter
2M12
TK = Temperature contact
Length
T50NO = 50 °C closer
280
T60NO = 60 °C closer
370
T70NO = 70 °C closer
500
T80NO = 80 °C closer
Quantity level contacts
1-4 T50NC = 50 °C opener
T60NC = 60 °C opener
Level contact T70NC = 70 °C opener
K = opener / closer T80NC = 80 °C opener
W = change over

Example for order

You need: Level switch with flange, brass, connector S6, length L= 500 mm, 2 x level contacts and temperature
contact TK 80 as opener, 1. contact 100 mm falling closer, 2. contact 420 mm falling opener
You order: NT 64-MS-S6/ 500 - 2K -T80NC, L1=100 fC, L2 = 420 fO

Standard pin assignment NT 64

Connector M3 (DIN 43650) S6 (DIN 46651) M12 ( base ) 2 x M12 ( base )
A B
2
1
3 4

L1 L1 L1 L1
1 2 1 2 1 4 1 4
only level contact(s) L2 L2 L2 L2
3 3 2 A 2
L3
Type K PE
L4
4 3 3
L3
5 1 4
6 L4
B 2
PE 3

1 L1 2 1 L1 2 1 L1 4 1 L1 4
only level contact(s) 3 3 2 A 2

Type W PE L2 4 3 3
5 1 L2 4
6 B 2
PE 3

L1 L1 L1
1 1 2 1 4
2 L2
Level contact(s) 3
3 2
L3
Type K TK / KT 4 TK / KT
PE 3
5 6
and temperature
TK / KT PE

1 L1 2 1 L1 4
Level contact(s) 3 A 2
Type W 4 3
5 6
and temperature TK / KT
1 4
PE B 2
PT
TK / KT PT 3
L1 L1
1 2 1 4
Level contact(s) L2 L2
3 A 2
L3
Type K 4 3

and Pt 100 (RTD) 5 6 1 4

PT PE B 2
PT 3
TK = Thermo contact KT = Temperature transmitter PT = Temperature sensor Pt 100 (RTD) other assignments on request
DE 10 0209
05/2009
Page 3/6 we reserve the right to amend specifications
Technical data NT 64D
Housing about
Basic unit 270°
max. operating pressure 1 bar turnable
M12x1
operating temperature -20 °C to +80 °C
min. spec. density of fluid 0,80 kg/dm³ with float SK 601
0,85 kg/dm³ with float SK 221

12
lengths 280, 370, 500

Material / Design MS VA
display housing PA PA

116
float hard PU (SK 601) 1.4571 (SK 221)
immersion tube brass 1.4571
flange (DIN 24557) PA PA
SSR (option) brass VA

4
Level contacts K10
max. quantity 2 GI-cork gasket
function fC / fO*
max. voltage 30 V

L1=min.40
L2
max. current 0,5 A

distance of contacts =min.40

F000561
max. contact load 10 VA
min. distance of contact 40 mm
*fO= falling opener / fC = falling closer

included in the delivery

L
fixing bolts (6 pieces) and GI cork-gasket

Display

SK601
temperature display range -20 °C to +120 °C (4 °F to 248 °F) SSR
indication range alarm 0 °C to 100 °C (32 °F to 178 °F) stilling tube
accuracy 1% with support ring
resolution 0,5 °C (1 °F)
min.60

protection class IP65

display 4 digit 7 segment LED display
operation by 3 buttons 5
current consumption at power up approx. 100 mA for 100 ms
operating current consumption approx. 50 mA Ø51 (MS)
3,5

supply voltage (UB ) 10 - 30 V DC

(nominal voltage 24 V DC) Ø60,3 (VA)
ambient temperature -20 °C to +70 °C

Temperature sensor: Pt 100 class B, DIN EN 60751

top view:
The following temperature outputs are available: A 6xØ6

-2T L
connector (base) 2 x M12 - 4 pol
Ø90
Ø73

max. contact load 1A

PNP transistor output, 2 x free programmable T
current PNP output max. 0,5 A per output
E
1T-KT
connector (base) 2 x M12 - 4 pol
max. contact load 1A R
PNP transistor output, 1 x free programmable Clearance
current PNP output max. 0,5 A per output N min. Ø60
analogue output 1 x 4-20 mA, 2-10 V, min. Ø61 with
0-10 V or 0-5 V stilling tube
A
load analogue output max. 500 W

-4T T
connector (base) 1 x M12 - 4 pol.
1 x M12 - 8 pol. I
max. contact load 1A
PNP transistor output, 4 x free programmable V
current PNP output max. 0,5 A per output
max. 1 A overall E
O
Option
stilling tube SSR
P
Material as immersion tube T.
DE 10 0209
05/2009
Page 4/6 we reserve the right to amend specificationsn
 Product code for NT 64D
NT 64D- -2M12
Series
Nivotemp NT 64D -2T
LED Temperature display
Design 2 x Temperature output
MS brass ®

VA float and immersion tube VA -4T

LED Temperature display
Connector 4 x Temperature output
2 x M12
-1T-KT
Length LED Temperature display
280 1 x Temperature output
370 1 x Analogue output
500
Switch function 2 . contact
Quantity of level contacts fO = falling opener
1K or 2K fC = falling closer
K = opener / closer
Position L2=...mm
Position L1=...mm 2. level contact
1. level contact

Switch function 1. contact

fO = falling opener
fC = falling closer

Accessories:
Part No. Description
91 44 05 0010 Connecting cable M12x1, 4-pol., 1,5 m, elbow connector (female) and straight connector (male)
91 44 05 0046 Connecting cable M12x1, 4-pol., 3,0 m, elbow connector (female) and straight connector (male)
91 44 05 0047 Connecting cable M12x1, 4-pol., 5,0 m, elbow connector (female) and wire
91 44 05 0048 Connecting cable M12x1, 8-pol., 1,5 m, elbow connector (female) and straight connector (male)
91 44 05 0049 Connecting cable M12x1, 8-pol., 3,0 m, elbow connector (female) and straight connector (male)
91 44 05 0033 Connecting cable M12x1, 8-pol., 5,0 m, elbow connector (female) and wire

Example for order

You need: Level switch with flange, Design MS, connector S6, length L= 500 mm, 2 x level contacts; 1. contact 100
mm falling closer, 2. contact 420 mm falling opener, with temperature display and 2x programmable
temperature output

You order: NT 64D-MS-2M12/500-2K-100fC-420fO-2T

Standard pin assignment NT 64D

Type NT 64D-2T Type NT 64D-1T-KT Type NT 64D-4T
Level contact(s) Level contact(s) Level contact(s)
2 x Temperature output 1 x Temperature output 4 x Temperature output
A B 1 x Analogue output

Connector A = level L1 L1 L1
1 4 1 4 1 4
2 L2 L2 L2
2 2 2
1
3 4 3 3 3

1 +24 V DC
1 +24 V DC 1 +24 V DC 3 GND 2
3 GND 3 GND 3 8
Connector B = temperature 2 OUT 2
Display

Display Display 4 OUT 1 4 1

unit
unit

2 unit 5 OUT 3 7
1 5
Pt 100
(RTD)

Pt 100
(RTD)

3 6
4 4 T1 (PNP) 4 T1 (PNP) 6 OUT 4
2 T2 (PNP) 2 Analog out Pt 100
(RTD)

DE 10 0209
05/2009
Page 5/6 we reserve the right to amend specifications
 Das EasyJust System
10 (adjustability) contact strip with cm scale

Thermo element changing contact function wireless (bistable) level contacts

TK / PT / KT fO/fC by turning the contacts function: falling closer (fC)
180° or falling opener (fO)

Using adjustable level contacts allows the application of standardised immersion tubes in oil tanks of different sizes
and geometrical shapes.

The switching points are changeable to the requirement of the individual application at any time without purchasing
a specific level switch.

This facilitates design and logistics for the users and OEMs.

The level contacts are electric items which need to be in contact with the respective circuit. Therefore normally wires
are used which results in difficult adjustability when using several contacts.

The Easy Just System is based on a wireless structure of the contacts.

The contacts are designed of closed and colour coded housings. They are positioned on a printed circuit board with
gold plated contacts. The colours are used for the coding of the different contacts and assure the allocation of the
connector’s assignments.

The contacts’ function (fO or fC) is determined by the 180° rotation on the printed circuit board.

An adjusted temperature switch (bi-metal, NO or NC), a Pt 100 (RTD) or a 4-20 mA transmitter is fixed at the lower
end of the printed circuit board, depending on the chosen option for the temperature surveillance.

DE 10 0209
05/2009
Page 6/6 we reserve the right to amend specifications