DMT80480T070_05W

7.0’， 800×480，K600E Kernel，65K Color TFT HMI

Revise Date: 2011.05.11 Beijing DWIN Technology Co., Ltd www.dwin.com.cn 400-018-9008 0 / 18
 DMT80480T070_05W
7.0’， 800×480，K600E Kernel，65K Color TFT HMI
DMT80480T070_05WN:

DMT80480T070_05W
Intelligent display terminal
Data sheet

Size: 7.0inch
Resolution: 800×480

Version Content Revise Date

VER 2.0 English Version 2009-11-01
VER 2.1 Updated optional accessories, instruction set 2011-03-20
VER 2.3 Updated reliability test and assembly dimensions 2011-05-11
chart

Revise Date: 2011.05.11 Beijing DWIN Technology Co., Ltd www.dwin.com.cn 400-018-9008 1 / 18
 DMT80480T070_05W
7.0’， 800×480，K600E Kernel，65K Color TFT HMI
DWIN TFT HMI MODULE

Simplified serial operation

HMI actualization

THE FULL RANGE OF PRODUCTS:

BASIC TYPE, STANDARD TYPE, ENHANCED TYPE
To satisfy the widely applications of different industry.
Basic Type: Simple in external, inexpensive, a substitution for TN, STN without the function of GUI. Available
for most of the working environments.
Standard Type: 100% preburning, temperature testing and dead pixels rejection before delivery based on Basic
Type, the price is 30%—50% higher in bulk price.
Enhanced Type: Based on Standard Type, it was manufactured with high-standard screen and special disposals
for adapting the rigours environment (e.g. Intrinsic Safety Anti-explosion).

Integrated standard fonts & Extensible user fonts

Intelligent LCD terminal was assembled with 5 fonts before delivery, which include 8*8 ASCII, 16*16 GBK,
32*32 GB2312, 12*12 GBK, and 24*24 GB 2312.
Moreover, extensible fonts are also available according to the requirement of users such as GBK, BIG5, SJIS,
HANGUL, and UNICODE. Fonts designing function is supported in same time.

Optional operation modes

The module can be operated by Keyboard or Touch Screen.
The coordinate numerical values of the touched screen could be obtained directly, as well as key
assignments. With PC-settings and touching/keyboard-control configuration files downloading, operation effects
will be visual.
Visual display
Wide in viewing angle, various in color; the brightness of screen can be adjusted in 64 levels (CCFL and
OLED are not included), which could provide an easier operation and monitoring environment for users.

Graphical User Interface(GUI) operation

All the Intelligent LCD terminals are operated under the GUI environment; the development of GUI and
software/hardware could be carried out in the sometime, which saves the manufacturing cost and circle.
Multi-controller option
Connecting to the controllers (including PC, SCM, PLC, DSP, and ARM) with Serial port.
The terminal could be driven with the level of TTL / CMOS and RS232 mostly. Moreover, USB download
function is available for specific terminals, which could provide the baud rates up to 921600bps.

Revise Date: 2011.05.11 Beijing DWIN Technology Co., Ltd www.dwin.com.cn 400-018-9008 2 / 18
 DMT80480T070_05W
7.0’， 800×480，K600E Kernel，65K Color TFT HMI
CONTENTS

Perfect reliable HMI technology—

Boost you updating true-color era!
Technical specification...............................................................................4
Module characteristics；direct current electric characteristics； memory space；
Dimensions; ambient related parameter.

Instruction/Command List........................................................................6
All the instructions/commands are provided, which initialed with 0xAA and ended
with 0xCC, 0x33, 0xC3, 0x3C.

Reliability Test............................................................................................9
Provide methods of temperature and humidity, impact and vibration testing.

Recommended Setting and Attentions…………….................................10

Extra careful is needed to against the out of alignment; attention of storage and use is
presented.

Assembly Dimension Chart......................................................................11

The dimensions and parameters of all the modules are provided.

Naming Rules.............................................................................................12
Naming rules are presented, which could offer all the relevant parameters of the
module (including module‘s type, series, as well as supporting peripheral devices).

Available Accessories................................................................................13
Related accessories are provided, (e.g.: USB-TTL convertor which could achieve the
baud rate up to 921600 bps, is aiming for the modules without USB port) in order to
provide a more convenient and easy operation environment for users.
The Testing of LCD Screen......................................................................14
Detailed information about the rules of screen testing, such as the testing method of
dead pixels, light spot as well as gray spot.

FAQ............................................................................................................15
A collection of common problems and solutions.

Typical Applications and Illustrative Diagram......................................16

A simple C51 and ASM51 example, e.g. text displaying code for ASM51 and C51, as
well as the illustrative diagram to achieve the function based on the SCM
STC12C2052.

Revise Date: 2011.05.11 Beijing DWIN Technology Co., Ltd www.dwin.com.cn 400-018-9008 3 / 18
 DMT80480T070_05W
7.0’， 800×480，K600E Kernel，65K Color TFT HMI

Technical Specification

Terminal Characteristics
Terminal Type DMT80480T070_05W
Kernel K600
Category Basic Type
TFT-ID 0x02
Display Color 65K color TFT HMI
Size （inch） 7.0”
〔1〕
Resolution (WxRGBxH, pixel) 800xRGBx480
Backlight LED
Brightness N Typical Brightness 500nit；Brightness of the screen can be adjusted to
64 levels with software.
T Typical Brightness 450nit；Brightness of the screen can be adjusted to
64 levels with software.
Contrast Ratio 500
Reaction Time（ms) 15
Viewing Angle（L/R/U/D） 70/70/50/70
Screen Mode Digital
Note [1]: 1. Modules can work in the 90°pattern rotation after software modification. (480×800)
2. Viewing angle is also adjustable to 6 o‘clock or 12 o‘clock position. (Pre-order required before purchase).
Direct Current Electrical Characteristics
Input Power Voltage（V） 5.0– 42
Electric Current（mA, Typical value） Backlight On Backlight Off
〔2〕
（input ：VCC=12V） 310 80
Note [2]：The input voltage and current are measured at the pin socket of the terminal in the DC Electrical Characteristics Test
Customer Interface〔3〕
Pin Name Number Type Illustration
VCC 1,2 P Power input
〔3〕
BUSY 3 O Full signal of serial buffer
〔3〕
DOUT 4 O Serial output
〔3〕
DIN 5,6 I Serial input
GND 7,8 P Public ground
I:INPUT，O:OUTPUT，P:POWER
Note [3]: 1.Adopting a 8 Pin 2.54mm spacing socket; Socket type: Molex 0022057085;
2. Direction of the signal was defined with HMI; 'I' refers to the signal from the user's system transmitted to the HMI.
3. Pins with the same definition in the modules are connected together internally.
4. This terminal serial port is 3.3V TTL/CMOS. (PCB:ON=3.3V TTL/CMOS，OFF=RS232） ，default OFF（RS232）
Interface
〔4〕
Serial Mode Universal Asynchronous Receiver/Transmitter (UART), 8N1 mode(1 start bit,
1 stop bit, 8 data bit, no parity bit), Baud rate: 4800-115200bps. Different
baud rate settings available by software.
〔4〕
USB Interface No
Touch panel No （DMT80480T070_05WN）
Support 4 line resistance touch panel（DMT80480T070_05WT）accuracy±1%
Key-board Interface No
Video Interface No
Real-Time Clock (RTC) (Backup battery) Support Gregorian and lunar calendar RTC(2000-2099)
Notes[4]： Baud rate available for Serial or USB connection.
1. I/O=VCC or NC, Baud rate available for Serial
（bps） 1200 2400 4800 9600 19200 38600 57600 115200（Default）
Baud rate Set 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07
2. I/00=0V: 921600bps;
3. Use 0xE0 configured the serial port baud rate (see instruction set), not lose when power off.
Revise Date: 2011.05.11 Beijing DWIN Technology Co., Ltd www.dwin.com.cn 400-018-9008 4 / 18
 DMT80480T070_05W
7.0’， 800×480，K600E Kernel，65K Color TFT HMI
Memory Space
〔5〕
Space of Font 32MB, 60fonts: 5 standard fonts with one reserved font. Support GBK, BIG5,
SJIS, HANGUL, UNICODE and user design their own fonts.
Space of Image 96MB (Up to 128 full-screen images storage space) can extended to 1GB
Serial Access Memory Space（RMA） Up to 32MB and overlapping with the image memory space.
Note [5]: 1. Pre-loaded with 5 fonts before delivery, located at 0x00(ASCII), 0x20(12 lattice GBK), 0x21(16 lattice GBK), 0x22(24
lattice GB2312), 0x23(32 lattice GB2312).
Dimension
Viewing Area Size 154.1(W)×86.0(H) mm
Dimensions 190.6(W)×105.4(H) ×16.0(N)/17.5(T)mm
Net Weight 275g (DMT80480T070_05WN)
325g (DMT80480T070_05WT)
Environment Condition（limited by the temperature range of LCD screen）
Working Temperature -20℃ — +70℃

Storage Temperature -30℃ — +80℃

Command Set

Command Set Using the unified Command Set ―DWIN HMI Command Set‖

Model Selection

DMT80480T070_05WN Support RTC

Models
DMT80480T070_05WT Support Touch panel, RTC

Revise Date: 2011.05.11 Beijing DWIN Technology Co., Ltd www.dwin.com.cn 400-018-9008 5 / 18
 DMT80480T070_05W
7.0’， 800×480，K600E Kernel，65K Color TFT HMI

Command List
Command parameter Illustration Sup
Com
Categories port
mand

Hand shake 0x00 No Check the configuration and version √

0x40 Fcolor+Bcolor Palette setting √
0x41 D_X（0x00-0x7F）+D_Y（0x00-0x7F） Character space setting √
Parameter
0x42 X+Y Move the appointed color to background color palette √
configuration
0x43 X+Y Move the appointed color to foreground color palette. √
0x44 Mode+X+Y+Wide（0x01-0x1F）+Height（0x01-0x1F） Cursor display mode setting √
0x53 8X8 lattice ASCII character √
0x54 16×16lattice GBK √
0x55 X+Y+String 32×32 GB2312 √
Text display
0x6E 12×12 GBK √
0x6F 24×24 GB2312 √
0x98 X+Y+Lib_ID+C_mode+C_dot+Fcolor+Bcolor+String Display any lattice，any encoded string. √
0x50 More points setting in the background color.(delete point) √
0x51 （x,y）0+（x,y）1+ ……+（x,y）n More points in the foreground color. √
Points Setting
0x74 X+Ys+Ye +Bcolor+（y, Fcolor）1+ ……+（y, Fcolor）n Dynamic curve display. √
0x72 Address(H:M:L)+Data_word0+ ……+ Data_wordn Operation to the buffer of video card. √
0x56 Polygon display: Line the points with foreground colored segment. √
(x,y)0+(x,y)1+ ……+(x,y)n
0x5D Polygon delete: Line the points with background colored segment √
Lines &polygon Spectrum display: display a continuous vertical line with the same end in a
0x75 X+Y+Height_max+Height0+ Height1+ ……+ Heightn √
fast rhythm.
0x76 X+X_dis(0x00-0xFF)+Y0+ Y1+ ……+ Yn Line chat display（Xi=X+i*X_dis,Yi=Yi） √
Arcs 0x57 (Type,x,y,r)0+(Type,x,y,r)1+……+ (Type,x,y,r)n Arcs display √
0x59 Show rectangles: display rectangles by foreground color） √
Rectangles (xs,yz,xe,ye)0+(xs,yz,xe,ye)1+ ……+ (xs,yz,xe,ye)n
0x69 Delete rectangles: display rectangles by background color √
0x64 X+Y+Color Fill in the appointed area √
0x52 无 Clear screen √
0x5A Areas deleting √
0x5B (xs,yz,xe,ye)0+(xs,yz,xe,ye)1+ ……+ (xs,yz,xe,ye)n Fill in more than one appointed areas. √
Areas
0x5C Areas color changing √
Operation
0x60 Appointed areas ring-shifting to the left √
0x61 Appointed areas ring-shifting to the right √
(xs,yz,xe,ye,n)0+(xs,yz,xe,ye,n)1+……+ (xs,yz,xe,ye,n)n
0x62 Appointed areas shifting to the left √
0x63 Appointed areas shifting to the right √
0x70 Picture_ID Display a full screen image √
0x7B Picture_ID Display a full screen image and calculate the cumulative sum. √
0x71 Picture_ID+Xs+Ys+Xe+Ye+X+Y Display part of a picture in the memory（background display） √
Pictures & Display a part from an image which stored in the module (background not
0x9C Picture_ID+Xs+Ys+Xe+Ye+X+Y √
Icons shown), automatically restore the current image background.
0x9D Picture_ID+Xs+Ys+Xe+Ye+X+Y Display part of a picture in the memory（background does not display） √
0xE2 Picture_ID Picture saving √
0x99 (x,y,Icon_ID)0+(x,y,Icon_ID)1+……+ (x,y,Icon_ID)n/无 User-defined icons display √
Turn off/on the automatic implementation of the user‘s pre-setting
Animation 0x9A 0xFF/Pack_ID
Command set
0xC0 Address(H:L)+ Data_word0+ ……+ Data_wordn Writing data to the temporary buffer √

Temporary 0x01+Address+Pixel_Number(H:L) Display the pre-set date points in the temporary buffer
buffer 0xC1 0x02+Address+Line_Number(H:L) Display the pre-set date lines in the temporary buffer
operation dynamic curve scaling: connecting the data points in the temporary buffer
0x03+Address+X+Y+ Line_Number+D_x+Dis_x+K_y+Color
zone
0x04+Addr1+X+Y+Line_Number+0x01+Dis_x+Color1+ Oscillometer: connecting the data points in temporary buffer in a √
Addr0+ Color0 flicker-free high-speed
Revise Date: 2011.05.11 Beijing DWIN Technology Co., Ltd www.dwin.com.cn 400-018-9008 6 / 18
 DMT80480T070_05W
7.0’， 800×480，K600E Kernel，65K Color TFT HMI
0x05+Address+X+Y+Line_Number+D_x+Dis_x+M_y+D_y+ Using the data in the temporary buffer to display line charts.
Temporary 0xC1 Color
buffer 0x06+Address+X+Y+Line_Number+D_x+Dis_x+M_y+D_y+ Using the data in the temporary buffer zoom to display a
operation Color+Ymin+Ymax window-constrained bi-directional line chart
Using the command in the temporary buffer to perform a synchronize
0x10+Address+Frame_Number
display
0XC2 <Address>+<Data_length> Read back data from the temporary buffer. √
0xF2 0xF2+0xF2+0x5A+0xA5+Lib_ID Font modification √
Database
0x90 0x55+0xAA+0x5A+0xA5+Address（H:MH:ML:L）+Data Write data to the user‘s database（32MB） √
Operation
0x91 Address+Read_Length(H:L) Read data from the database（32MB） √
Key board 0x71 K_code Key code uploading
Operation 0xE5 0x55+0xAA+0x5A+0xA5+K_Code0+ ……+K_Coden Key code port modification
Uploading the last data after the touch-screen is released, (which can turn
0x72 √
off by 0xE0 Command
Touch_X+Touch_Y
Uploading data when pressing the touch panel(uploading once only by
Touch pad 0x73 √
setting the command of 0xE0 )
Operation
0xE4 0x55+0xAA+0x5A+0xA5 Touch panel adjusting √
0x78 Uploading the defaulted key code when switching the touch interface.
Touch_Code √
0x79
Buzzer
0x79 BZ_time Buzzing once only（10×Bz_time mS） √
Operation
Video Switching HMI and video mode (support CVBS/S-Video signal input,
0x7A Work_Mode+Video_mode+Video_CH
Operation NTSC/PAL formats)
Backlight 0x5E Non or 0x55+0xAA+0x5A+0xA5＋V_ON+V_OFF+ON_TIME Turn off the backlight or control the backlight mode by touching or keying. √
Control 0x5F Non or PWM_T(0x00-0x3F) Turn the backlight on or adjusting the brightness by PWM. √
Clock 0x9B 0x5A、0x5B(read)/0x00(off)/0xFF+M+TM+Color+X+Y(ON) Clock on/off ; read the clock √
Operation 0xE7 0x55+0xAA+0x5A+0xA5＋YY:MM:DD:HH:MM:SS Clock adjusting √
Parameter Configuring the user's serial port speed and the touch-screen data
0xE0 0x55+0xAA+0x5A+0xA5+Panel_Set+Bode_Set+Para1 √
Configuration uploading.
Downlode:0x01+PY_Code answer: 0x01+HZ_num+String
Downlode :0x02+A+B+C+D answer: 0x02+E+F Calculating(A × B + C) / D, E is 4 bytes quotient, F is 2 bytes remainder √
Algorithm 0xB0
Downlode :0x03+Data_Pack0 answer: 0x03+ Data_Pack1 Array listing of unsigned integers(2 bytes)
Downlode:0x04+PY_Code answer: 0x04+HZ_num+String PINYIN input based on GBK √
0x30 Start_Seg+Play_number+Play_time Play the music in the appointed zoom
Volume 0x32 Volume_L+Volume_R+0x00 Volume adjusting
Operation 0x33 0x55+0xAA+0x5A Stop playing
0x3F ‗OK‘ Sound-op response
Pic_Now+(xs,yz,xe,ye)+P_next+P_cut+Touch_Code Touch interface automatically switching (0x1E font files) √
Pic_Now+0x00:K_Code+Pnext+P_cut+Touch_Code Keyboard interface automatically switching (0x1B font files)
Configuration
Delay+Length+ Command Play auto-instructions(0x1C font files) √
file Operation
Pic_ID+(xs,yz,xe,ye) Icon Character Definition (0x1D font files) √
Command_Length+Command+String Uploading the instructions pre-settled by users(0x1A font file) √
Upgrading DWIN_M600_BOOT! Upgrading the core software on line through Serial √
Note ：√ Command available in this module

Revise Date: 2011.05.11 Beijing DWIN Technology Co., Ltd www.dwin.com.cn 400-018-9008 7 / 18
 DMT80480T070_05W
7.0’， 800×480，K600E Kernel，65K Color TFT HMI
Reliability Test

Temperature and humidity test

Test Item Test Method
High temperature-working 70℃，240H
High temperature-storage 80℃，240H
High temperature high humidity-working 50℃，90%RH，240H
Low temperature-working -20℃，240H
Low temperature-storage -30℃，240H
Cold and hot impact -20℃（30Min）~70℃(30Min)，100 cycles

Impact and vibration test

Test Item Test Method
Impact test (without power) 1 .Vibration level: 980m / s 2 (equivalent to 100G.)
2. Waveform: half sine, 6ms
3.Vibration frequency：total three vibration inputs（each direction of three
mutually perpendicular axis has a vibration input）
Vibration test (with power) 1.Frequency range: 10-55 Hz
2. Stoke: 1.5mm
3.Vibration: half-wave, vertical axis（X，Y，Z axis：2 hours）
4.Scan: 10G, 55-400 Hz
5.Period: 15 minutes

Revise Date: 2011.05.11 Beijing DWIN Technology Co., Ltd www.dwin.com.cn 400-018-9008 8 / 18
 DMT80480T070_05W
7.0’， 800×480，K600E Kernel，65K Color TFT HMI
Precautions

1. Applied for LCD terminals:

LCD terminals are precise instrument. For preventing LCD terminals from damage, please read the
following precautions carefully before using:
1）Please use the mounting hole on the module‘s corners for installation and avoid bending or
wrenching during assembling process. Do not drop, bend or twist the TFT-LCD module during
handling;
2）The protective film(Laminator) applied on the screen should be peeled off in the course of using,
otherwise, it may affects the sensitivity or leads to malfunction；
3）Modules are fragile products that any drops, beats and strong vibrations may cause damages；
4）The visual effectiveness of the terminal changes along with the viewing angles. So, users should
take a full account of the viewing position.
5）Caution with the polarizing film from being scratched by hard objects.
6）Avoid touching the power inverter, which may cause unnecessary damages.
7）Using and saving the modules in its temperature range to avoid damages. LCD crystallization
occurs if working below lowest temperature requirements, resulting in permanent damages.
8）Disassembling the module might cause permanent damages, which should be strictly avoided;
9）Do not wipe the terminals with gasoline, alcohol and other chemicals. Cottons and soft cloths are
available.
10) To continuously improve the performance of HMI module, the terminals and data sheet will do
continuously upgrade and revision, the information is subject to change without prior notice!

2. Storage:
If you need to storage the modules for a long time, we recommend you of the following ways:
1） Keep in dark and avoid exposure of bright light；
2） Do not put anything on the screen;
3） Store the module at a room temperature place.

Revise Date: 2011.05.11 Beijing DWIN Technology Co., Ltd www.dwin.com.cn 400-018-9008 9 / 18
 DMT80480T070_05W
7.0’， 800×480，K600E Kernel，65K Color TFT HMI
Assembly Dimensions Chart

Revise Date: 2011.05.11 Beijing DWIN Technology Co., Ltd www.dwin.com.cn 400-018-9008 10 / 18
 DMT80480T070_05W
7.0’， 800×480，K600E Kernel，65K Color TFT HMI

Appendix 1 Naming Rules

Naming Rules

e.g. DMT48270K043_01WN
DM DWIN HMI
T T=65K color HMI G=16.7M color D=256 color
48 48: resolution in width. 48=480, 64=640
Illustration 270 270: resolution in height
〔1〕
K K=advanced type, T=basic type, S=standard type
043 Dimension,056=5.6 inch,035=3.5 inch
_0 0=with shell,1=no shell
1 Series number of different hardwares
W W=wide temperature range N=normal temperature
〔2〕
N N=no TP,T=with TP, K=with keyboard, Z=ODM
Note [1]: T=Basic, simple peripherals, low price, mainly replace the applications of monochrome or no GUI function color screen.
S=Standard, compare with the basic, 100% aging, high and low temperature testing, bad point eliminate in the factory. Batch
price higher than the same type of basic about 30%-50%

K=Enhanced, compare with the standard, the main difference is the choice, special protective of screen, etc, in order to

satisfy a few demanding application requirements(such as explosion proof)

Note [2]: Peripherals explanation

TP(Touch Panel): touch screen(4 line resistance screen)
KB (Keyboard): matrix keyboard interface, according to different type configuration 4*4, 6*6 and 8*8 matrix keyboard interface.
RTC(Real Time Clock): real time clock, 2000-2099 years in the Gregorian calendar and the lunar clock, can be display on the
screen.(0x9B instruction)

Revise Date: 2011.05.11 Beijing DWIN Technology Co., Ltd www.dwin.com.cn 400-018-9008 11 / 18
 DMT80480T070_05W
7.0’， 800×480，K600E Kernel，65K Color TFT HMI
Appendix 2 Accessories
Accessories
Configuration Name Model Illumination Picture
Method
8PIN－8PIN 20cm straight
Standard Double 8PIN
HDL65020 attachment
Parts connecting line
Plug：Molex 0050375083

90°8PIN_2.54mm Socket：
Optional 8PIN 2.54mm space
Socket Molex 0022057085

USB to TTL
Optional HDL660
downloading board

Notes: More information about the accessories please check the DWIN Accessory Book.

The Instruction of High-speed Downloading Board

Num Name Instruction
1 DWI N HMI Model：DMD48270T043_01WN
2 Terminal USB Baud Rate Setting Pad jumping to 921600bps.（ON=921600bps, OFF=User Set, defaulted OFF.）

3 HDL660 Downloading Board Top-speed downloading board.

4 HDL65020 Double 8PIN 20cm straight attachment
connections
5 USB port Connecting PC to USB port with double USB connection line
6 Power socket Typical value: +12V.
Instructions：
1. Pad jumper to 921600bps. See number
1,2;
2. Connecting the module to Downloading
board.（See number 1、3、4）;
3. Connecting board with PC（See number
5）;
4.Power on（See number 6）; Use 921600 to
download data.

Revise Date: 2011.05.11 Beijing DWIN Technology Co., Ltd www.dwin.com.cn 400-018-9008 12 / 18
 DMT80480T070_05W
7.0’， 800×480，K600E Kernel，65K Color TFT HMI
Appendix 3 Testing Summary:

There are 4 classes of the LCD panel quality defined by ISO in 2001: Class 1 is the highest
rating and does not allowed any dead pixels. The last rating is Class 4, allowed 10N dead pixels.
Under normal circumstances, we are using the panels of Class 2 in serial T which allows three dead
pixels, but if there are two dead pixels appeared within 5 * 5 pixels are also not allowed.

1) Dead pixels.
The pixels appears pure black under the totally black background or pure black under white and
in the color switching of red, green and blue, it also displays in black or white in the same position
that can be assumed to be a dead pixel.

2) Bright pixels
Pixels that showing the color of red, green and blue when the background color is black are
called bright pixels which are also unnormal.

3) Dark pixels
Pixels that showing the color of non-pure red, green and blue when the background color is
black are called dark pixels which are also unnormal.

Revise Date: 2011.05.11 Beijing DWIN Technology Co., Ltd www.dwin.com.cn 400-018-9008 13 / 18
 DMT80480T070_05W
7.0’， 800×480，K600E Kernel，65K Color TFT HMI

Appendix 4 FAQ:

Q1. When the terminal and the MCU are connected, it displays normally on the
single-step implementation of the control procedure. But when the terminal is
powered directly, it doesn't response.
A: Please check whether the input power to the MCU are delayed or the shakehand
acknowledgment are reset; you may connecting the MCU to the PC, using the Terminal assistant
Software to check the baud rate or the instructions sent by MCU. If both the MCU and terminal can
communicate with PC rather than communicate with each other, then measure whether the output
signal of MCU are standard RS232 signal by using an oscilloscope.

Q2. Do we need to clear the screen before showing up texts?

A: We don't need to clear the screen except when displaying the transparent Command (0x98).

Q3. Why the terminal didn't response to the instructions sent by MCU?
A: Dropping Frames maybe the reason for the unimplementation of instructions, check with the
BUSY signal or add delay before the lost instructions.

Q4. About power voltage;

A: Make sure the voltage in the terminal interface is corresponding to the basic requirement.

Q5. Terminal cannot display normally after received the configuration Command
of 0xE0.
A: Reset the TFT_ID (Command of 0xE0).

Q6. Some terminals cannot display normally after updating the standard M600
procedure.
A: Some terminals are not using the standard procedure.

Q7. Could the module simulate the instrument Mode?

A: AA 71 Command is available.

Q8. How to extend the terminal font?

A: Use the fonts generating software to make a new font and then download the new font to the
terminal by Terminal assistant (Do not overlap with other fonts).

Q9. How to connect the module with PC and SCM?

A: The MCU to PC and terminal to PC are all connected with TXD/RXD of the RS232. Cross
connect the 2 and 3 pin foot when connecting the SCM to HMI terminal.

Q10. Steps of making a touch interface.

A: 1) Design interfaces;
2) Using the Sysdef.exe software to configurating the logical relationships between interfaces,
then, generating the configuration file;
3) Download the file to the terminal;
4) Texting and modificating.

Revise Date: 2011.05.11 Beijing DWIN Technology Co., Ltd www.dwin.com.cn 400-018-9008 14 / 18
 DMT80480T070_05W
7.0’， 800×480，K600E Kernel，65K Color TFT HMI
Appendix 5 Typical applications

1, An Illustration of C51 and ASM51.

1，ASM51 Program：

Revise Date: 2011.05.11 Beijing DWIN Technology Co., Ltd www.dwin.com.cn 400-018-9008 15 / 18
 DMT80480T070_05W
7.0’， 800×480，K600E Kernel，65K Color TFT HMI
2，C51 Program：

Revise Date: 2011.05.11 Beijing DWIN Technology Co., Ltd www.dwin.com.cn 400-018-9008 16 / 18
 DMT80480T070_05W
7.0’， 800×480，K600E Kernel，65K Color TFT HMI

Revise Date: 2011.05.11 Beijing DWIN Technology Co., Ltd www.dwin.com.cn 400-018-9008 17 / 18
 DMT80480T070_05W
7.0’， 800×480，K600E Kernel，65K Color TFT HMI
2. Typical Application Schematic

Revise Date: 2011.05.11 Beijing DWIN Technology Co., Ltd www.dwin.com.cn 400-018-9008 18 / 18