Scribd
Upload
258 views6 pages

Link Layer Discovery Tool: Winpcap

The Link Layer Discovery Tool is a Windows command line application used to discover and manage Integra series devices. It scans the network to find Integra devices, retrieve information from them, and can reset passwords or settings on specific devices using MAC addresses. The tool and instructions for its use can be downloaded from the listed website.

Uploaded by

Rolando David Patiño
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
258 views6 pages

Link Layer Discovery Tool: Winpcap

The Link Layer Discovery Tool is a Windows command line application used to discover and manage Integra series devices. It scans the network to find Integra devices, retrieve information from them, and can reset passwords or settings on specific devices using MAC addresses. The tool and instructions for its use can be downloaded from the listed website.

Uploaded by

Rolando David Patiño
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Link Layer Discovery Tool

The Link Layer Discovery Tool is a command line application for MS Windows. It sends
requests to LLD server application which runs on all Integra series devices.

The tool is used to discover Integra/Integra-S/Integra-G/Integra-GS/ Integra-W/Integra-WS


devices and reset their passwords or settings.

The application runs on the following version of Windows: Windows Vista, Windows 7,
Windows 8, and Windows 10.

WinPCAP must be installed to use the Link Layer Discovery Tool.

The Link Layer Discovery Tool for Integra series can be downloaded in
https://saftehnika.com/en/downloads in “Tools” section. Login required.

1) Unzip the LLD.zip file you downloaded to a directory of your choice, for example,
C:\SAF\LLD\ .
2) The application is started via the command prompt (Start menuRuntype
“cmd”press ENTER). Command line console window should appear.

3) The default directory in the console is the current user directory. To change it, type:
cd <directory path>
For example: cd c:\saf\lld
4) Run the recovery tool by typing “lld” without quotes in the console prompt and press
ENTER.

SAF Tehnika JSC 1


5) Available commands and network adapter list should be shown. To scan for Integra
devices, the command should be run as follows:

lld <network interface>


For example:
lld \DEVICE\NPF_{A67EA6B7-1686-4E98-BA19-2A7E5B205DCF}
In order to copy the interface address from network adapter list, click the right mouse
button over the console and select “Mark”:

SAF Tehnika JSC 2


Then by holding the left button select the interface address:

After selecting, release the left button and click the mouse right button anywhere on
the console. The address should be copied.

Type “lld “ and paste the address by clicking the right button anywhere on the
console:

The result should be similar as in the image below:

SAF Tehnika JSC 3


6) Press ENTER and the recovery tool will now scan for Integra devices. Available devices
and their information will appear in the console. Make sure that the device has
finished booting up.

7) Use the MAC address of the device with the reset command to reset this specific
device. The MAC address can be copied the same way as the interface address.

8) The device is reset by using the required reset command with the recovery tool:
lld <interface> reset <MAC> <reset command>

SAF Tehnika JSC 4


where <interface> − network interface from the network adapter list
<MAC> − required Integra device address
<reset command> − reset options

Different reset options are available depending on the reset requirement. Reboot and
store options are also available. Store option saves the device current configuration
so it will be restored after system reboot. The commands are available in the reset
command list. Use the command after the MAC address of the device as shown in the
previous reset command example.

For example, to reset users and passwords on Integra device #1, use:
lld \DEVICE\NPF_{A67EA6B7-1686-4E98-BA19-2A7E5B205DCF} reset 0004A6813773 acc

Make sure the command is run within 3 minutes after Integra reboot (“RK1 fresh” must
be “true” in the console), otherwise error shown in the screenshot below error will
occur. The recovery tool will continue to retry the command.

Power down the Integra device and power it up again, the reset should be completed
soon.

SAF Tehnika JSC 5


If the reset cannot be completed, redo step 8).

9) Store changes by command (must be done within the time frame of 3 minutes after
boot) or by using WEB GUI (any time before the Integra device is powered off) “SAVE”
button.

For example,
lld \DEVICE\NPF_{A67EA6B7-1686-4E98-BA19-2A7E5B205DCF} reset 0004A6813773 store

SAF Tehnika JSC 6

You might also like