Insp DT 545
Insp DT 545
Insp DT 545
Regulatory Environmental
I. Product Safety VII. System Dimension and Weight
II. Electromagnetic Compatibility VIII. Declarations and Certifications
III. Ergonomics, Acoustics, and Hygienics IX. Performance Data
IV. Power Cords and User Documentation X. Product Materials Information
V. Datasheet Responsible Party Name and Address XI. Packaging
VI. Trade Import/Export Compliance Data XII. Batteries
XIII. Design for Environment
XIV. Recycling/End-of-Life Service Information
XV. Dell Corporate Environmental Information
I. PRODUCT SAFETY 1
The product has been certified and bears the Mark, as applicable, of the Product Safety authorities as indicated below.
Country/Region Authority or Mark
Argentina IRAM
Belarus BELLIS
Cambodia ISC
Canada SCC
China CNCA or CCC
Croatia KONCAR
European Union CE
IECEE IECEE CB
Israel SII
Kazakhstan OTAN – CKT
Kenya KEBS
Kuwait KUCAS
Mexico NYCE or NOM
Moldova INSM
Nigeria SONCAP
Norway NEMKO
Russia GOST
Saudi Arabia KSA ICCP
Safety Registration
Singapore Scheme
South Africa NRCS
Taiwan BSMI
UKRTEST or
Ukraine UKRSERTCOMPUTER
United States NRTL
Uzbekistan STZ
* Notice: This product has been assigned a unique regulatory model and regulatory type that is imprinted on the product shipping invoice and product labeling to
provide traceability to the regulatory approvals noted on this datasheet. This datasheet applies to any product that utilizes the assigned regulatory model and type
including marketing names other than those listed on this datasheet. Requests for specific information on product regulatory approvals should reference the assigned
product regulatory model and type.
1
The above-listed Product Safety certifications may vary depending upon the location of the Dell factory and specific product configuration. Certification marks may
not be applied on products for countries outside the purchaser’s country.
Product Safety, EMC & Environmental Datasheet
Page 1
II. ELECTROMAGNETIC COMPATIBILITY 2
The product has been certified and bears the Mark, as applicable, of the EMC authorities as indicated below.
Country/Region Authority or Mark Class
Australia / ACMA
New Zealand or C-Tick Class B
Belarus BELLIS Class B
Bosnia
& Herzegovina,
Montenegro, Serbia KVALITET Class B
Canada ICES Class B
China CNCA or CCC Class B
Croatia KONCAR Class B
European Union CE Class B
Israel SII Class B
Japan VCCI Class B
Kazakhstan OTAN – CKT Class B
Moldova INSM Class B
Norway NEMKO Class B
Russia GOST Class B
South Africa SABS Class B
South Korea KCC Class B
Taiwan BSMI Class B
UKRTEST or
Ukraine UKRSERTCOMPUTER Class B
United States FCC Class B
Uzbekistan STZ Class B
Vietnam ICT Class B
Dell products are provided with the power cord and user documentation suitable for the intended country of delivery.
Products that are relocated to other countries should use nationally certified power cords and plugs to ensure safe operation
of the product. Contact Dell to determine if alternate power cords or user documentation in other languages is available for
your market.
2
The above-listed EMC certifications may vary depending upon the location of the Dell factory and specific product configuration. Certification marks may not be
applied on products for countries outside the purchaser’s country.
3
The above-listed Ergonomics, Acoustics and Hygienics certifications may vary depending upon the location of the Dell factory and specific product configuration.
Certification marks may not be applied on products for countries outside the purchaser’s country.
Product Safety, EMC & Environmental Datasheet
Page 2
V. DATASHEET RESPONSIBLE PARTY NAME AND ADDRESS
Dell Inc.
Department: Global Regulations and Standards
MS: PS4-30
Round Rock, Texas 78682, USA
512-338-4400
Regulatory_Compliance@Dell.com
For additional questions regarding importing & exporting classification of Dell products, please send an e-mail to:
US_Export_Classification@Dell.com
Through internal design controls and supply chain declarations, this system has been verified to comply with the EU RoHS
Directive. For more details, please see www.dell.com/rohsinfo.
All Dell products shipping directly into China which are manufactured on or after March 1st, 2007, will be China RoHS
compliant. For more details, please see www.dell.com/rohs.
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, EC 1907/2006) is the European Union’s (EU)
chemical substances regulatory framework. Dell complies with the Reach directive. For more details, please see
www.dell.com/downloads/global/corporate/environ/Dell_REACH_SVCH_Table.pdf
System Configuration
The Energy Consumption and Declared Noise Emissions data is based on a configuration including:
Processor Intel Q9400 (within G33 MB)
Hard Drive(s) 750GB, 7200 RPM
Memory 8GB (4 x 2GB DIMMs)
Video Card ATI Radeon HD3650
RMSD DVD
Power Supply 300W
Energy Consumption 4
Heat Dissipation
Energy Consumption (BTU/hr).
Service Level Description of Service Level
(Wattage) AUTOMATICALLY
CALCULATED
The system is running programs to maximize
*Maximum 160.37 548.46
the power consumption.
The system is tested in compliance to Energy
Minimum 97.78 334.40
Star 4.0 "idle" mode.
The system is in a low-power sleep mode
ACPI S3 2.07 7.09 otherwise known as "Standby" or "Suspend to
Ram".
The system is in a low-power sleep mode
ACPI S4 1.08 3.72 otherwise known as "Hibernate" or "Suspend
to Disk"
Off 1.21 4.16 System is turned off.
*Maximum Energy Consumption results are based solely upon the laboratory testing of the System Configuration listed above.
Energy consumption is tested at 230 Volts / 50 Hz. Heat dissipation is calculated based on the measured watts, assuming the
service level is attained for one hour. Off data is not meant to show compliance to US Executive Order 13221. When
applicable, Dell product information related to US Executive Order 13221 may be obtained at: http://oahu.lbl.gov/index.html.
Declared Noise Emissions in accordance with ISO 9296 (tested in accordance with ISO 7779)
Sound Pressure
Service Level Operator Position
(LpAm, decibels) (re 2x10-5 Pa)
Idle 26.8
CPU activated at 80% utilization 26.6
CPU activated at 100% utilization 47.5
This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the software, components and
4
peripherals you ordered. Accordingly, the customer should not rely upon this information in making decisions about electrical tolerances or otherwise. No warranty
as to accuracy or completeness is expressed or implied.
Product Safety, EMC & Environmental Datasheet
Page 4
X. PRODUCT MATERIALS INFORMATION 5
Restricted Substances
This Dell product does NOT contain any of the following substances (in concentrations exceeding legal threshold limits):
Asbestos
Azo dyes/colorants in components that come into direct contact with human skin
Cadmium and its compounds (except for use in applications exempted by the EU RoHS Directive)
Class I and Class II CFCs (chlorofluorocarbons) and HCFCs (hydrofluorocarbons)
Chloroparaffins, short chained (10-13 carbon chain)
Chromium VI and its compounds (except for use in applications exempted by the EU RoHS Directive)
Halogenated dioxins or furans (i.e. polychlorinated dibenzodioxines, polychlorinated dibenzofurans)
Lead and its compounds (except for use in applications exempted by the EU RoHS Directive)
Mercury (except for use in applications exempted by the EU RoHS Directive)
Nickel and its compounds in components that are likely to result in prolonged skin exposure
PCBs (polychlorobiphenyls) or PCTs (polychloroterphenyls)
PBBs (polybromobiphenyls) or PBDEs (polybrominated diphenylethers)
PVC (polyvinyl chloride) in plastic parts greater than 25 grams
Polychlorinated naphthalenes (PCNs)
Tributyl tin (TBT) and triphenyl tin (TPT) compounds
Flame Retardants Used in Mechanical Plastic Parts > 25 grams and Motherboards
1.FR 10 for
aliphatic/alicyclic
1.Halogen-chlorine chlorinated compounds.
Motherboard 2.Halogen-Fluorine 2.FR 25 for aliphatic
3.Halogen-bromine fluorinated compounds
3.FR 16 for aromatic
brominated compounds
5
Waste Handling. Local regulations should be observed when disposing of this product due to the presence of the materials and substances as listed above.
Product Safety, EMC & Environmental Datasheet
Page 5
XI. PACKAGING
No CFCs (chlorofluorocarbons), HCFCs (hydrofluorocarbons) or other ozone depleting substances are used in packaging
material. Chromium, lead, mercury, or cadmium are not intentionally added to packaging materials and are not present in a
cumulative concentration greater than 100 ppm as incidental impurities. No halogenated plastics or polymers are used for
packaging material. Dell complies with the EU Directive 94/62/EEC.
XII. BATTERIES
Batteries in this product are not based on mercury, lead or cadmium technologies. The batteries used in this product are in
compliance with EU Directive 91/ 157/ EEC, EU Directive 93/ 86/ EEC, EU Directive 98/ 101/ EEC, and EU Battery Directive
2006/66/EC.
The product documentation includes instructional information on the proper removal and disposal of the batteries used in this
product. Below is a listing of batteries present in the product:
Recyclability
For recyclability, this system incorporates the following design guidelines:
EU WEEE mark is applied to products sold in Europe, EU recycling information can be found at www.euro.dell.com/recycling
Minimal use of non-separable connections, such as gluing and welding between different materials.
Mechanical plastic parts greater than 100 grams consist of one material or of easily separable materials.
Take back and recycling services are offered for this product in certain countries. If you want to dispose of system
components, contact Dell for instructions by emailing recycling_emea@dell.com or visit www.dell.com/recyclingworldwide
and select the relevant country.
Information on Dell’s Environmental initiatives, policies, programs and goals can be found at www.dell.com/environment.
Product Safety, EMC and Environmental Datasheets for Dell products are located at:
www.dell.com/regulatory_compliance_datasheets