GIP Global Insulation Package

DATASHEET
D_GIP_v0034_20200205_EN

Includes
ISO 16283-1

Complete and Easy Solution for Sound Insulation Measurement

PRESENTATION
GIP is the definitive solution from CESVA for the
measurement, calculation and generation of
sound insulation reports. GIP is based on a new
philosophy of working that is designed to answer
the need for a quick, reliable and economically
acceptable system, (both when purchasing it and
when carrying out the measurement), for the
measurement of sound insulation in field and in
laboratory. CESVA offers a complete and easy
solution.
GIP covers all the process: TRANSPORT + AS-
SEMBLY + CALIBRATION + MEASUREMENT +
CALCULATIONS + REPORTS. A range of ac-
cessories has also been developed to completely
satisfy the requirements set out in airborne, fa-
çade and impact sound insulation measurements.
The instruments: SC420 sound level meter,
FP122 sound source and MI006 tapping machine
are the components that carry out most of the
hard work. The computer with CESVA Insulation
Studio (CIS) application is the calculation center
of the solution.
GIP represents a substantial leap forwards for the
improvement of field airborne sound insulation
projects, as much as for projects with a high num-
ber of measurements as for those with few.

CHARACTERISTIQUES
 COMPLETE solution for Sound Insulation measurement in accordance with ISO 16283-1 and ISO 140:
MEASUREMENT + CALCULATIONS + REPORT.
 User friendly solution: Easy to use.
 The FASTEST solution on the market: minimum times of configuration, calibration, measurement,
export, calculation and report generation.
 Lightweight, robust and totally transportable system.

-1-

Maracaibo, 6 T. (34) 934 335 240 [email protected]

08030 Barcelona (Spain) F. (34) 933.479.310 www.cesva.com
GIP Global Insulation Package
MAIN CHARACTERISTICS

Complete and Easy Solution for Sound Insulation Measurement

GIP ELEMENTS:
 SC420 Sound level meter Spectrum Analyser:
1/3 octave band Spectrum Analyser in real
time and one single range. Also measures re-
verberation time in 1/3 octave band using the
interrupted noise and the integrated impulse
response methods .
 FP122 Sound Source: Omnidirectional
dodecahedral loudspeaker and Noise
generator + Equalizer + Amplifier. Sound
Power Level: 123 dB PWL.
 MI006 Tapping machine: standardized tapping
machine.
 CIS CESVA Insulation Studio Software for
insulation calculations: Software for insulation
calculations and report generation. Includes
specific reports for the ISO 16283-1 standard.
Quick and easy to use. Direct data importation
from CESVA sound level meters.
 CB006 acoustic calibrator: Class 1 acoustic
calibrator to ratify spectrum analyser sound
level meters

AUTOMATIC GENERATION OF STANDARD REPORT:

Once the measurement process is finished and the data

stored in the sound level meter have been downloaded,
they can be easily loaded into CESVA Insulation Studio
(CIS) automatically generating a standard report. CIS
identifies each of the measurements, makes the calcula-
tions and generates the report.

-2-

Maracaibo, 6 T. (34) 934 335 240 [email protected]

08030 Barcelona (Spain) F. (34) 933.479.310 www.cesva.com
GIP Global Insulation Package
TECHNICAL SPECIFICATIONS

Complete and Easy Solution for Sound Insulation Measurement

SC420: FP122
Sound power level: 123 dB PWL
 IEC 61672-1:02 class 1. UNE-EN 61672-1:05 class 1
118,4 dB SPL in room (V= 50 m3; T= 1,84 s)
 IEC 61260:95/A1:01 class 1, UNE-EN 61260:97/A1:02 class 1
120,5 dB in room (V= 240 m3; TR= 10,05 s)
 ANSI S1.4:83/A:85 type 1, ANSI S1.43:97 type 1, ANSI
Maximum input power: 600 W
S1.11:04 class 1
Nominal impedance: 6 
 DIN 45657:2005 in reference to the Taktmaximalpegel function

 Marking. Complies with 73/23/EEC and EMC 89/336/EEC

low-tension regulations, the latter amended by 93/68/EEC
STATIC PRESSURE INFLUENCE:
OPERATION RANGE MAXIMUM ERROR
(at 1 kHz and 94 dB or 104 dB)
from 65 to less than 85 kPa: 0.9 dB
from 85 to 108 kPa: 0.4 dB
TEMPERATURE INFLUENCE:
OPERATION RANGE MAXIMUM ERROR Fig1. Directivity diagrams for the octave bands centred in 125
from -10 to +50 °C: 0.5 dB Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz and 4 kHz
HUMIDITY INFLUENCE:
OPERATION RANGE MAXIMUM ERROR Maximum output power 6 : 580 W
(in the absence of condensation) (at 40°C and 1 kHz) (Pink noise filtered between 50 and 5000 Hz 1/3 ocatve bands)
from 25 to 90 %: 0.5 dB Graphic equalizer 1/3 octave band from 50 to 5000 Hz
DECAY CURVE AND IMPULSE RESPONSE MEASUREMENT: Frequency response (0,15 dB): 20—20000 Hz
Using equivalent levels (linear average) with successive integra- Typical power consumption: 6A (580VA)
tion time of 10 ms during a 6 second period.
OBTAINING THE DECAY CURVE FROM THE IMPULSE RE-
SPONSE: MI006
Schroeder’s backward integration method. Number of hammers: 5
DECAY CURVE SLOPE ESTIMATION: Distance between hammers: 100 mm
Automatic estimation of the decay curve from a least-squares fit Hammer weight: 500±12 g
linear regression analysis. Supply voltage: 110 - 230 Vac
QUALITY INDICATORS: Supply frequency: 50 - 60 Hz
Non-linearity parameter , curvature C and B·T product for each
frequency band. Typical consumption: 60 W
RANDOM INCIDENCE FILTER: Dimensions: 200 x 693 x 331 mm
It has selectable random incidence filter. Weight: Without battery 12,6 kg
BATTERIES:
TYPE: 2 alkaline 1.5 V, AA (LR6) size STANDARDS
TYPICAL DURATION: 8:45 hours ISO 16283-1 Airborne insulation, ISO 140-5 Façades insulation
DIMENSIONS: 292 x 85 x 25 mm and ISO 140-7 Impact noise insulation.
ISO 140/717 (International), ASTM (USA), CTE DB-HR (Spain),
WEIGHT: with batteries 330 g
Arrêté 30 jun 1999 (France), DL nº 129/2002 (Portugal), DPCM
without batteries 280 g
5/12/1997 (Italia), SIA 181 (Suisse), Resistance to the passage of
sound. Approved document E (UK), Desempenho de edificios
habitacionais de até cinco pavimentos (Brasil), DIN 4109
(Deutschland), Ääneneristys ja meluntorjunta rakennuksessa
(Finland)
Bluetooth: The characteristics, technical specifications and
Wireless system: Bluetooth© 20 m coverage. accessories may vary without prior notice

-3-

Maracaibo, 6 T. (34) 934 335 240 [email protected]

08030 Barcelona (Spain) F. (34) 933.479.310 www.cesva.com
GIP Global Insulation Package
ACCESSORIES

Complete and Easy Solution for Sound Insulation Measurement

Tripod for the model BP012 with 3 m extension rod for microphones, Acoustic calibrator class 1, CB006
wheels, TR014. PR003.

Internal lithium battery to power the Microphone extensión cable, CN010. Mains power feeder with USB, AM300.
MI006, MB006.

SUPPLIED ACCESSORIES:
SI020 CESVA Lab software for communication CN012 Loudspeaker cable: 10 meter cable with
to PC 4 pins speakon connector
MA001 Remote control: To control AP602 and FL005 Carrying case trolley format to transport
MI006 the MI006.
AN001 Antenna: For AP602 and MI006 control
through remote control
FL012 Carrying case trolley format to transport
the BP012.

OPTIONAL ACCESSORIES:
CB006 Acoustic calibrator class 1 CN010 Microphone extensión cable 10 m
TR050 Tripod 1,50 m height CN030 Microphone extensión cable 30 m
TR014 Tripod with wheels for BP012 TR001 Tripod adapter
ML043 Briefcase (48x37x16 cm) PR003 3 m extension rod for microphones
ML013 Briefcase (39x32x12 cm)
AM300 Mains transformer (C=100/240 V, 50/60
Hz)
CN003 Microphone extensión cable 3 m

-4-

Maracaibo, 6 T. (34) 934 335 240 [email protected]

08030 Barcelona (Spain) F. (34) 933.479.310 www.cesva.com