Scribd
Upload
119 views3 pages

Installation Manual SA-501: I. Accessory Parts II. Installation Procedures

This 3-sentence summary provides the key steps for installing the SA-501 Scan Accelerator Kit: The document outlines the 10 step installation procedure for the SA-501 Scan Accelerator Kit which includes removing covers, installing the JPEG board and securing it with screws, reconnecting cables, and configuring settings in the machine's service mode to enable the new accessory. Proper packaging disposal and safety precautions are also noted.

Uploaded by

hashem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
119 views3 pages

Installation Manual SA-501: I. Accessory Parts II. Installation Procedures

This 3-sentence summary provides the key steps for installing the SA-501 Scan Accelerator Kit: The document outlines the 10 step installation procedure for the SA-501 Scan Accelerator Kit which includes removing covers, installing the JPEG board and securing it with screws, reconnecting cables, and configuring settings in the machine's service mode to enable the new accessory. Proper packaging disposal and safety precautions are also noted.

Uploaded by

hashem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

SA-501 Scan Accelerator Kit

INSTALLATION MANUAL
Applied Machines: C550/C451
COLOR MFP (Color/B&W): 45 ppm/55 ppm, 45 ppm/45 ppm
Product Code: A00J/A00K

I. Accessory parts II. Installation procedures


No. Name Shape Q’ty 1. Turn off the machine and unplug the power cord
from the power outlet.
1. JPEG board 2. Remove the right rear cover.

4037IXC053DA

2. Screw
(3 × 8 mm)
2

4037IXC151DA

3. Installation
manual
1 set A00JIXC071DA

4980IXC019DA
3. Remove the right rear cover (three screws).

After unpacking, be sure to get rid of the


packaging materials and keep them out of
the reach of children.
Putting the head in the plastic bag
involves danger of suffocation.

A00JIXC231DA

4. Take off the IR connector then remove the con-


nector cable from the wire saddle.

A00JIXC090DB

A00J-9634-02
E-1
5. Loosen the two shoulder screws and remove the 8. Insert the IR connector that has been removed in
shield cover (two shoulder screws). step 4 into the main unit. Slip the connector cable
into the wire saddle.

A00JIXC091DB

A00JIXC101DA

6. Install the shield cover that has been removed in


step 5 to the JPEG board (two screws furnished 9. Reinstall the right rear cover that has been
with the Kit). removed in step 3 (three screws).
10. Reinstall the right rear cover that has been
removed in step 2.

4037IXC056DB

7. Insert the JPEG board assy into the machine and


secure it by tightening the shoulder screws (two
shoulder screws).
Note:
When inserting the board, align it with the slits in
the machine.

A00JIXC092DB

E-2
III. Scan accelerator setting
1. Plug the power cord into the power outlet and
turn on the machine.
2. Display the Service Mode screen (For details of
how to display the Service Mode screen, see the
service manual).
3. Touch “System 2.”

A00JIXE118DA

4. Touch “Option Board Status.”

A00JIXE116DA

5. Touch “Set” of JPEG.

A00JIXE133DA

6. Touch “END.”
7. Touch “Exit” on the Service Mode screen.
8. Turn OFF and ON the Main Power Switch.
Note:
When displayed the Service Mode screen, be sure
to turn off the main power after exiting the Service
Mode screen and wait for 10 seconds or more
before turning on.

E-3

You might also like