Product Data: Hand-Arm Vibration Meter - Type 2537

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Product Data

Hand-Arm Vibration Meter — Type 2537


USES: ❍ Simultaneous RMS and Peak measurements
❍ Control workers’ exposure to hand-arm vibration in ❍ Hand-arm vibration and linear frequency weightings
the workplace ❍ Measures Aeq, Aeq4, Aeq8, Amax, Amin, Amp, Peak,
❍ Find calculated half- and full-day exposure levels and Inst
(Aeq4 and Aeq8) based on short measurements ❍ 40 records of stored results
❍ Demonstrate a tool’s compliance with vibration ❍ Two measurement ranges
exposure safety standards
❍ Included mounting bracket attaches the
accelerometer firmly to a tool handle

FEATURES: ❍ Five built-in languages: English, German, French,


Spanish, Italian
❍ Conforms with ISO 8041 Type 2 and ISO 5349
❍ Back-lit display

Description Data Storage & Processing


The instrument is capable of storing
up to 40 records of measurement re-
Hand-Arm Vibration Meter Type sults. Each record stores the date,
2537 is designed to be quick and easy measurement time, Aeq, Aeq4, A eq8,
to use when taking occupational Amax, A min, A mp, and overload status.
health related measurements. These results can be transferred in a
Measurements are displayed on a spreadsheet-compatible format via
large LCD screen, which includes a the built-in serial interface to a PC.
quasi-analogue bar that shows the Measurement results can also be out-
current acceleration level. put to a portable printer as you take
The instrument features two par- them.
allel independently frequency
weighted detectors. This enables it to Convenient Downloading
display both RMS and Peak readings The instrument comes with commu-
simultaneously. nication software that runs on a PC
under Windows. The software’s
Intuitive User-interface graphical interface makes it simple
The clearly marked arrows and sym- to download measurement records
bols on the front panel, combined and display them in a spreadsheet
with the large LCD screen (with back program.
light), make the hand-arm vibration
meter very easy to learn and use. The AC Output
display is clear and concise. Clear in- The linearly weighted AC output en-
structions and warnings guide you ables you to make a direct calibrated
through your measurement. recording (on Digital Audio Tape, for
example), which can be used later for
Real-time Clock complete vibration analysis.
The Type 2537 has a real-time clock
and calendar, which marks each
measurement with the date and
time.
Specifications 2537
STANDARDS:
Conforms with ISO 8041 Type 2 and ISO 5349 CE-mark indicates compliance with EMC Directive

INPUT:
0.35 pC/ms-2 for accelerometer Type 4505 Safety EN 61010–1 and IEC 1010-1: Safety requirements for electrical equipment for
measurement, control and laboratory use
FREQUENCY WEIGHTINGS:
• Linear (Unweighted) EMC Emission EN 50081–1: Generic emission standard. Part 1: Residential, commercial and
• Hand-Arm Vibration Weighting light industry
EN 50081–2: Generic emission standard. Part 2: Industrial environment
MEASURING RANGES:
CISPR 22 (1993): Radio disturbance characteristics of information technology
Hand-Arm: 5 − 1500 Hz
equipment. Class B Limits
Linear: 6.3 − 5000 Hz (-3 dB)
Inst, Low Range Setting: 0.1 − 316 m/s2 FCC Rules, Part 15: Complies with the limits for a Class B digital device
Inst, High Range Setting: 1 − 3160 m/s2
Peak, Low Range Setting: 0.14 − 447.2 m/s2 EMC Immunity EN 50082–1: Generic immunity standard. Part 1: Residential, commercial and
Peak, High Range Setting: 1.4 − 4472 m/s2 light industry
EN 50082–2: Generic immunity standard. Part 2: Industrial environment
DETECTORS: When measuring vibration with the Lin frequency weighting in an industrial
RMS Averaging Time: 1 s environment, levels below 0.3 m/s2 may be affected (extreme worst case)
Peak Rise Time: <100 µs
Automatic reset at 1 s intervals TRANSDUCER: WARM-UP TIME:
Type 4505 accelerometer <15s
PARAMETERS:
Amin, Amax, Aeq, Aeq4, and Aeq8 are calculated
SERIAL INTERFACE: REFERENCE CALIBRATION:
based on 1 s exponential averaging of the in-
stantaneous RMS readings (Inst). Amp is the Compatible with: Frequency: 159.15 Hz
highest peak reading (Peak) • EIA–574 Acceleration: 10 m/s 2
• EIA–232–E with 25-pole adaptor (gives an indication of 1 m/s2 when HA weighted
OVERLOAD INDICATION: Baud Rate: 9600
Instantaneous indication of overload and latched Data Bits: 8 ENVIRONMENTAL EFFECTS:
overload. Stored records also include a latched Stop Bit: 1
Storage Temperature without Batteries:
overload indicator Parity: None
–20 to + 70°C (–13 to + 158°F)
Handshake: XON/XOFF
Operating Temperature:
DISPLAY: Result Output Formats:
–10 to + 50°C (14 to 122°F)
4 line LCD showing: Buffer (printer format) or all records (spread-
Maximum Humidity for Operation:
• Input signal level – indicated with a quasi- sheet format)
90% RH at 40°C for 96 h
analogue bar (updated 15 times per second)
• Selected parameters with level AC OUTPUT:
Short-circuit protected coaxial LEMO socket (se- BATTERIES:
• Warnings for: battery low and overload
• Measuring range ries 00) Four 1.5 V LR6/AA size alkaline cells
• Elapsed measurement time Minimum Load Impedance: Lifetime (at room temperature):
• Menus for displaying and editing settings 5 kΩ in parallel with 1 nF Approximately 14h
• Recalled records Output: Internal back-up battery:
Features a back-light for easy viewing, which Output signal from input amplifier (no frequency Charging time: ~10hours (1st time)
can be turned on and off and includes an auto weighting); approximately 0.5 V RMS at full scale Keeps clock and memories operating for
time-out to save batteries. Displayed parameters deflection 6months (typically) if fully charged
updated once per second
CLOCK: PHYSICAL CHARACTERISTICS:
MEMORY: Real-time (calendar) and measurement duration Size: 257× 97× 41mm
40 Records of Overall Results Factory set to CET Weight: 460g (incl. batteries)

Ordering Information
Type 2537 Hand-Arm Vibration Meter Optional Accessories AO 0339: Low-Noise Cable (for Types 4500
and 4501)
Includes the following accessories: AO 0403: LEMO to BNC Cable
Type 4505 Accelerometer Type 4294 Calibration Exciter AO 1386 9-pole Cable with 25-pole Adaptor
ZE 0777 Charge Amplifier Type 2322 Portable Printer (for computer and serial printer)
DB 3585 Mounting Stud Type 4500: Cubic Accelerometer
4 × QB 0013 Four 1.5V LR6/AA size alkaline Type 4501: Cubic Accelerometer
cells AO 0283: Super-Low-Noise Teflon Cable
AO 0038: Low-Noise Cable (for Types 4500 and 4501)

Brüel&Kjær reserves the right to change specifications and accessories without notice

WORLD HEADQUARTERS:
DK-2850 Nærum · Denmark · Telephone: +45 45 80 05 00 · Fax: +45 45 8014 05 · Internet: http://www.bk.dk · e-mail: [email protected]
Australia (02) 9450-2066 · Austria 00 43-1-865 74 00 · Belgium 016/44 92 25 · Brazil (011) 246-8166 · Canada: (514) 695-8225 · China 10 68419 625 / 10 6843 7426
Czech Republic 02-67 02 11 00 · Finland (0)9-229 3021 · France (01) 69 90 69 00 · Germany 06103 / 908-5 · Hong Kong 2548 7486 · Hungary (1) 215 83 05
Italy (02) 57 60 4141 · Japan 03-3779-8671 · Republic of Korea (02) 3473-0605 · Nederland (0)30 6039994 · Norway 66 90 4410 · Poland (0-22) 40 93 92
Portugal (1) 471 14 53 Singapore (65) 275-8816 · Slovak Republic 07 378 9520 · Spain (91) 36810 00 · Sweden (08) 71127 30 · Switzerland 01/940 09 09
Taiwan (02) 713 9303 · United Kingdom and Ireland (0181) 954-2366 · USA 1 800 332 2040
Local representatives and service organisations worldwide
BP 1695 – 11 97/12

You might also like