AQA IGCSE Further Maths Revision Notes: 1. Number
AQA IGCSE Further Maths Revision Notes: 1. Number
AQA IGCSE Further Maths Revision Notes: 1. Number
1. Number
Specification Notes What can go ugly
1.1 Knowledge and use of A few possibly helpful things:
𝑎 𝑏
numbers and the number If 𝑎: 𝑏 = 𝑐: 𝑑 (i.e. the ratios are the same), then =
𝑐 𝑑
system including fractions,
“Find the value of 𝑎 after it has been increased by 𝑏%”
decimals, percentages,
If say 𝑏 was 4, we’d want to × 1.04 to get a a 4% increase.
ratio, proportion and order 𝑏
of operations are expected. Can use 1 + as the multiplier, thus answer is:
100
𝑏
𝑎 (1 + )
100
“Show that 𝑎% of 𝑏 is the same as 𝑏% of 𝑎”
𝑎 𝑎𝑏
×𝑏=
100 100
𝑏 𝑎𝑏
×𝑎=
100 100
1.2 Manipulation of surds, GCSE recap: I’ve seen students
including rationalising the √𝑎 𝑎 inexplicably reorder
Laws of surds: √𝑎 × √𝑏 = √𝑎𝑏 and =√
denominator. √𝑏 𝑏 the terms in the
But note that 𝑎 × √𝑏 = 𝑎√𝑏 not √𝑎𝑏 denominator before
Note also that √𝑎 × √𝑎 = 𝑎 they multiply by the
To simplify surds, find the largest square factor and put this conjugate, e.g.
first: (2 + √3)(√3 − 2)
√12 = √4√3 = 2√3 Just leave the terms
√75 = √25√3 = 5√3 in their original
order!
5√2 × 3√2 Note everything is being multiplied here.
Multiply surd-ey things and non surd-ey things separately.
= 15 × 2 = 30 I’ve also seen
students forget to
√8 + √18 = 2√2 + 3√2 = 5√2
negate the sign, just
To ‘rationalise the denominator’ means to make it a non-
surd. Recall we just multiply top and bottom by that surd: doing (2 + √3)(2 +
6 6 √3 6√3 √3) in the
→ × = = 2√3 denominator. The
√3 √3 √3 3
problem here is that
The new thing at IGCSE FM level is where we have more
it won’t rationalise
complicated denominators. Just multiply by the ‘conjugate’:
the denominator, as
this just involves negating the sign between the two terms:
we’ll still have surds!
3 3 √6 + 2 3(√6 + 2)
→ × =
√6 − 2 √6 − 2 √6 + 2 2 Silly error:
A trick to multiplying out the denominator is that we have 6√6
the difference of two squares, thus (√6 − 2)(√6 + 2) = → 3√3
2
6 − 4 = 2 (remembering that √6 squared is 6, not 36!) (rather than 3√6)
2√3−1 2√3−1 3√3−4 (2√3−1)(3√3−4)
→ × = =
3√3+4 3√3+4 3√3−4 27−16
18−3√3−8√3+4 22−11√3
= = 2 − √3
11 11
www.drfrostmaths.com 1
2. Algebra
Specification Notes What can go ugly
2.2 Definition of a A function is just something which takes an input and uses some rule
function to produce an output, i.e. 𝑓(𝑖𝑛𝑝𝑢𝑡) = 𝑜𝑢𝑡𝑝𝑢𝑡
You need to recognise that when we replace the input 𝑥 with some
other expression, we need to replace every instance of it in the
output, e.g. if 𝑓(𝑥) = 3𝑥 − 5, then 𝑓(𝑥 2 ) = 3𝑥 2 − 5, whereas
𝑓(𝑥)2 = (3𝑥 − 5)2 . See my Domain/Range slides.
e.g. “If 𝑓(𝑥) = 2𝑥 + 1, solve 𝑓(𝑥 2 ) = 51
2𝑥 2 + 1 = 51 → 𝑥 = ±5
2.3 Domain and The domain of a function is the set of possible inputs. Not understanding
range of a function. The range of a function is the set of possible outputs. what 𝑓(𝑥 2 ) actually
Use 𝑥 to refer to input and 𝑓(𝑥) to refer to output. Use “for all” if any means.
value possible. Note that < vs ≤ is important. Not sketching the
𝑓(𝑥) = 2𝑥 Domain: for all 𝑥 Range: for all 𝑓(𝑥) graph! (And hence not
𝑓(𝑥) = 𝑥 2 Domain: for all 𝑥 Range: 𝑓(𝑥) ≥ 0 being able to visualise
𝑓(𝑥) = √𝑥 Domain: 𝑥 ≥ 0 Range: 𝑓(𝑥) ≥ 0 what the range should
𝑓(𝑥) = 2 𝑥 Domain: for all 𝑥 Range: 𝑓(𝑥) > 0 be). This is particularly
𝑓(𝑥) =
1
Domain: for all 𝑥 except 0. important for
𝑥 ‘piecewise’ functions.
Range: for all 𝑓(𝑥) except 0. Not being discerning
1
𝑓(𝑥) = between < and ≤ in
𝑥−2
Domain: for all 𝑥 except 2 (since we’d be dividing by 0) the range. e.g. For
Range: for all 𝑓(𝑥) except 0 (sketch to see it) quadratics you should
𝑓(𝑥) = 𝑥 2 − 4𝑥 + 7 have ≤ but for
Completing square we get (𝑥 − 2)2 + 3 exponential graphs you
The min point is (2,3). Thus range is 𝑓(𝑥) ≥ 3 should have <.
You can work out all of these (and any variants) by a quick sketch and Writing the range of a
observing how 𝑥 and 𝑦 values vary. function in terms of 𝑥
Be careful if domain is ‘restricted’ in some way. instead of the correct
Range if 𝑓(𝑥) = 𝑥 2 + 4𝑥 + 3, 𝑥 ≥ 1 𝑓(𝑥).
When 𝑥 = 1, 𝑓(1) = 8, and since 𝑓(𝑥) is increasing after
this value of 𝑥, 𝑓(𝑥) ≥ 8.
To find range of trigonometric functions, just use a suitable
sketch, e.g. “𝑓(𝑥) = sin(𝑥)” → Range: −1 ≤ 𝑓(𝑥) ≤ 1
However be careful if domain is restricted:
“𝑓(𝑥) = sin(𝑥) , 180 ≤ 𝑥 < 360”. Range: −1 ≤ 𝑓(𝑥) ≤ 0
(using a sketch)
For ‘piecewise function’,
fully sketch it first to find
range.
“The function 𝑓(𝑥) is
defined for all 𝑥:
4 𝑥 < −2
𝑓(𝑥) = { 𝑥 2 −2 ≤ 𝑥 ≤ 2
12 − 4𝑥 𝑥>2
Determine the range of 𝑓(𝑥).”
From the sketch it is clear
𝑓(𝑥) ≤ 4
You may be asked to construct a function given information
about its domain and range.
e.g. “𝑦 = 𝑓(𝑥) is a straight line. Domain is 1 ≤ 𝑥 ≤ 5 and
range is 3 ≤ 𝑓(𝑥) ≤ 11. Work out one possible expression
for 𝑓(𝑥).”
We’d have this domain and range if line passed through
points (1,3) and (5,11). This gives us 𝑓(𝑥) = 2𝑥 + 1
2.4 Expanding Deal with brackets with more than two things in them. Classic error of
brackets and e.g. (𝑥 + 𝑦 + 1)(𝑥 + 𝑦) = 𝑥 2 + 𝑦 2 + 2𝑥𝑦 + 𝑥 + 𝑦 forgetting that two
collecting like Just do “each thing in first bracket times each in second” negatives multiply to
terms. Deal with three (or more) brackets. give a positive. E.g. in
Just multiply out two brackets first, e.g. (𝑦 − 4)3
(𝑥 + 2)3 = (𝑥 + 2)(𝑥 + 2)(𝑥 + 2)
= (𝑥 + 2)(𝑥 2 + 4𝑥 + 4)
= 𝑥 3 + 4𝑥 2 + 4𝑥 + 2𝑥 2 + 8𝑥 + 8
= 𝑥 3 + 6𝑥 2 + 12𝑥 + 8
www.drfrostmaths.com 2
2.5 Factorising GCSE recap: You should know how to factorise difference of two
squares, quadratics of form 𝑥 2 + 𝑎𝑥 + 𝑏, form 𝑎𝑥 2 + 𝑏𝑥 + 𝑐 and
where you have a common factor.
www.drfrostmaths.com 3
Step 2: Since a cubic, must factorise like:
(𝑥 − 2)(𝑥+? )(𝑥+? )
Since all the constants must multiply to give +12 (as in the
original cubic), the two missing numbers must multiply to give -6.
This rounds down what we need to try with the remainder
theorem:
𝑓(−2) = (−2)3 − 3(−2)2 + ⋯ = 0 (therefore a factor)
Since (𝑥 + 2) is a factor, last factor must be (𝑥 − 3)
“Solve 𝑥 3 + 𝑥 2 − 10𝑥 + 8 = 0”
Using above technique, factorisating gives:
(𝑥 − 1)(𝑥 − 2)(𝑥 + 4) = 0
𝑥 = 1, 2 𝑜𝑟 − 4
2.9 Completing the Recap of GCSE: Halve number in front of 𝑥 for number inside We always subtract
square. bracket. Square this and ‘throw it away’. when we ‘throw away’,
e.g. 𝑥 2 + 4𝑥 − 3 → (𝑥 + 2)2 − 4 − 3 = (𝑥 + 2)2 − 7 even if number we
If coefficient of 𝑥 2 (i.e. the constant on the front of the 𝑥 2 term) halved was negative,
is not 1, always factorise this number out first, even if other e.g. 𝑥 2 − 6𝑥 + 1 =
numbers don’t have this as a factor: (𝑥 − 3)2 − 9 + 1
3𝑥 2 + 12𝑥 − 5 Often students add by
5 mistake.
= 3 (𝑥 2 + 4𝑥 − )
3
2
5 When coefficient of 𝑥 2
= 3 ((𝑥 + 2) − 4 − )
3 is not 1, be careful to
= 3(𝑥 + 2)2 − 12 − 5 maintain your outer
= 3(𝑥 + 2)2 − 17 bracket until the last
In the penultimate line we expanded out the outer 3(… ) bracket. step.
You can check your answer by expanding it back out and seeing if
you get the original expression.
Rearrange terms into form 𝑎𝑥 2 + 𝑏𝑥 + 𝑐 first, e.g.
“Express 2 − 4𝑥 − 2𝑥 2 in the form 𝑎 − 𝑏(𝑥 + 𝑐)2 ”
= −2𝑥 2 − 4𝑥 + 2
= −2(𝑥 2 + 2𝑥 − 1)
= −2((𝑥 + 1)2 − 1 − 1)
= −2(𝑥 + 1)2 + 4 = 4 − 2(𝑥 + 1)2
2.10 Sketching of Quadratics: Typical mistake is to do
functions. Sketch e.g. “Sketch 𝑦 = 𝑥 2 − 𝑥 − 2” x-intercepts of say 2
graphs of linear and a. Factorise and set 𝑦 to 0 to find and 3 if
quadratic functions. x-intercepts (known as ‘roots’). 𝑦 = (𝑥 + 2)(𝑥 + 3)
(𝑥 + 1)(𝑥 − 2) = 0
→ (−1,0), (2,0) Similarly if
b. Set 𝑥 = 0 to find 𝑦-intercept. 𝑦 = (𝑥 + 2)2 + 3, an
(0, −2) incorrect minimum
c. 𝑥 2 term is positive therefore ‘smiley face’ shape. point would be (2,3)
www.drfrostmaths.com 4
Cubics
When cubic is in factorised form then:
If (𝑥 + 𝑎) appears once, curve crosses 𝑥-axis at −𝑎
If (𝑥 + 𝑎)2 appears, curve touches at 𝑥 = −𝑎
As before, can get 𝑦-intercept by setting 𝑥 = 0.
If 𝑥 3 term is positive, uphill zig-zag shape, otherwise downhill.
e.g.
Piecewise Functions
Note: You do not need to know about graph transforms for IGCSEFM
(but do for C1).
2.11 Solution of GCSE recap. Solve 𝑥 2 + 2𝑥 − 3 = 0…
linear and quadratic …by factorisation. (𝑥 + 3)(𝑥 − 1) = 0 → 𝑥 = −3, 1
equations …by completing the square
(𝑥 + 1)2 − 4 = 0
(𝑥 + 1)2 = 4
𝑥 + 1 = ±2
𝑥 = +2 − 1 = 1, 𝑥 = −2 − 1 = −3
…by formula
𝑎 = 1, 𝑏 = 2, 𝑐 = −3
−2 ± √4 − (4 × 1 × −3)
𝑥= =⋯
2
…by graph
Sketch 𝑦 = 𝑥 2 + 2𝑥 − 3. Comparing to original equation, we’ve
substituted 𝑦 for 0. So interested in values of 𝑥 for which 𝑦 = 0.
We could similarly ‘look up’ values of 𝑥 for other values of 𝑦, e.g.
𝑥 2 + 2𝑥 − 3 = 5.
www.drfrostmaths.com 5
2.12 Algebraic and To ‘graphically’ solve simultaneous equations, sketch both lines, Suppose that 𝑥 = 𝑦 +
graphical solution and look at the points where they intersect. 4 and 𝑥 2 + 𝑦 2 = 20
of simultaneous Equations might not be in the usual 𝑎𝑥 + 𝑏𝑦 = 𝑐 form; if not, Common error is to
equations in two rearrange them! e.g. accidentally drop the
unknowns where 2𝑦 + 3𝑥 + 4 +𝑦 2 after subbing in
the equations could 2𝑥 = −3𝑦 − 7 the 𝑥, i.e.
both be linear or becomes: 𝑦 2 + 8𝑥 + 16 = 20
one linear and one 3𝑥 − 2𝑦 = −4 (extra +𝑦 2 has gone!)
second order. 2𝑥 + 3𝑦 = −7
then solve in usual GCSE manner. Could also solve by Other common error is
substitution. squaring brackets.
Similarly: e.g. (4 − 𝑥)2 = 16 −
𝑥−1 𝑥+6 8𝑥 + 𝑥 2
=3 =4
𝑦−2 𝑦−1 Incorrect variants:
becomes: 16 − 𝑥 2
𝑥 − 1 = 3𝑦 − 6 𝑥 + 6 = 4𝑦 − 4 16 + 𝑥 2
For “one linear, one quadratic”, solve as per GCSE method: 16 − 8𝑥 − 𝑥 2
rearrange linear equation to make 𝑥 or 𝑦 the subject, then sub
into quadratic equation and solve, e.g. Don’t forget to find the
𝑥+𝑦=4 values of the other
𝑦 2 = 4𝑥 + 5 variable at the end,
Then: and make sure it’s
𝑦 =4−𝑥 clear which 𝑥 matches
(4 − 𝑥)2 = 4𝑥 + 5 up to which 𝑦.
16 − 8𝑥 + 𝑥 2 = 4𝑥 + 5
𝑥 2 − 12𝑥 + 11 = 0
(𝑥 − 11)(𝑥 − 1) = 0
𝑥 = 11 → 𝑦 = −7
𝑥=1→ 𝑦=3
2.13 Solution of When solving linear inequalities, just remember that dividing or When solving
linear and quadratic multiplying by a negative number reverses the direction of the quadratic inequalities,
inequalities inequality. You can avoid this by putting 𝑥 on the side which is students usually get
positive. the ‘critical values’
To solve quadratic inequalities. right but stumble at
2𝑥 2 + 5𝑥 ≤ 3 the last hurdle because
2 they don’t sketch their
2𝑥 + 5𝑥 − 3 ≤ 0 Get 0 on one side.
(2𝑥 − 1)(𝑥 + 3) ≤ 0 Factorise quadratic, and
1 therefore guess which
This gives us ‘critical values’ of 𝑥 = , 𝑥 = −3
2
way the inequality is
Then you MUST SKETCH.
supposed to go.
Since on the left we sketched
𝑦 = (2𝑥 − 1)(𝑥 + 3) we’re interested
Use the word ‘or’
where 𝑦 ≤ 0
when you want the
This is in indicated region on left, i.e. where
1 two tails (and not ‘and’
−3 ≤ 𝑥 ≤ or comma)
2
Had we wanted
(2𝑥 − 1)(𝑥 + 3) ≥ 0, this would have given us the two ‘tails’ of the
1
graph, and we’d write “𝑥 < −3 𝒐𝒓 𝑥 ≥ ”
2
1
2.14 Index laws, GCSE recap: 𝑥 −𝑎 = 𝑥0 = 1 You might get
𝑥𝑎
including fractional 2
−
1
1 1 confused with straight
and negative 8 = 22 = 4
3 25 2 = 1 = line equations and
252 5
indices. −
2 2 raise both sides to the
27 8 3
3 2 2 4 negative reciprocal
( ) =( ) =( ) =
8 27 3 9 rather than just the
3
Example: “Solve 𝑥 4 = 27” reciprocal?
Just raise both sides to the reciprocal of the power to ‘cancel it out’.
4
3 3 4
(𝑥 4 ) = 273
𝑥 = 81
Convert any mixed numbers to improper fractions first.
2
7
“Solve 𝑥 −3 = 2 ”
9
3 3
−
2 −2 25 −2
(𝑥 )
3 =( )
9
3
9 2 3 3 27
𝑥=( ) =( ) =
25 5 125
www.drfrostmaths.com 6
GCSE recap: To raise an algebraic term to a power, simply do each part
of the term to that power, e.g.
(3𝑥 2 𝑦 3 )2 → 9𝑥 4 𝑦 6
1 1
(9𝑥 4 𝑦)2 → 3𝑥 2 𝑦 2
2.15 Algebraic “Prove that the difference between the squares of two consecutive odd
Proof numbers is a multiple of 8.”
Let two consecutive odd numbers be 2𝑛 + 1 and 2𝑛 + 3
(2𝑛 + 3)2 − (2𝑛 + 1)2
= 4𝑛2 + 12𝑛 + 9 − 4𝑛2 − 4𝑛 − 1
= 8𝑛 + 8 = 8(𝑛 + 1)
which is divisible by 8.
(The factoring out of 8 makes the divisibility explicit)
Limiting values:
3𝑛+1 1
“Show that the limiting value of is as 𝑛 → ∞”
6𝑛−5 2
𝑛 → ∞ means “as 𝑛 tends towards infinity”.
3𝑛+1 3𝑛 1
Write “As 𝑛 becomes large, → = ”
6𝑛−5 6𝑛 2
The idea is that as 𝑛 becomes large, the +1 and -5 become
3001 3000 1
inconsequential, e.g. if 𝑛 = 1000, then ≈ =
5995 6000 2
www.drfrostmaths.com 7
3. Co-ordinate Geometry (2 dimensions only)
Specification Notes What can go ugly
3.1 Know and use the Gradient is the change in 𝑦 for each unit increase in 𝑥. Δ𝑥
Doing accidentally, or
Δ𝑦 Δ𝑦
definition of gradient 𝑚 = (change in 𝑦 over change in 𝑥)
Δ𝑥 getting one of the two
e.g. If a line goes through (2,7) and (6,5) signs wrong.
2 1
𝑚=− =−
4 2
3.2 Know the relationship Parallel lines have the same gradient. Doing just the reciprocal
between the gradients of For perpendicular lines: rather than the ‘negative
parallel and perpendicular One gradient is the negative reciprocal of the other. reciprocal’.
lines. 1 1
e.g. 2 → − −4→
2 4
1 2 3
→ −5 →−
5 3 2
Remember that the reciprocal of a fraction flips it.
To show two lines are perpendicular, show the product
of the gradients is -1:
1
− × 4 = −1
4
Example: “Show that 𝐴(0,0), 𝐵(4,6), 𝐶(10,2) form a right-
angled triangle.”
Gradients are:
6 3 2 1 −4 2
𝑚𝐴𝐵 = = 𝑚𝐴𝐶 = = , 𝑚𝐵𝐶 = =−
4 2 10 5 6 3
3 2
Since × − = −1, lines 𝐴𝐵 and 𝐵𝐶 are perpendicular so
2 3
triangle is right-angled.
3.3 Use Pythagoras’ 𝑑 = √Δ𝑥 2 + Δ𝑦 2
Theorem to calculate the e.g. If points are (3,2) and (6, −2), then
distance between two
𝑑 = √3 2 + 4 2 = 5
points. Note that it doesn’t matter if the ‘change’ is positive or
negative as we’re squaring these values anyway.
3.4 Use ratio to find the “Two points 𝐴(1,5) and 𝐵(7,14) form a straight line. If a
coordinates of a point on a point 𝐶(5, 𝑘) lies on the line, find 𝑘.”
line given the coordinates Method 1 (implied by specification on left):
of two other points. On the 𝑥 axis, 5 is 4 6ths of the way between 1 and 7.
So “4 6ths” of the way between 5 and 14 is
4
𝑘 = 5 + × 9 = 11
6
Method 2 (easier!): Find equation of straight line first.
Using 𝑦 − 𝑦1 = 𝑚(𝑥 − 𝑥1 ):
9 3
𝑚= =
6 2
3
𝑦 − 5 = (𝑥 − 1)
2
Thus if 𝑥 = 5 and 𝑘 = 5:
3
𝑘 − 5 = (5 − 1)
2
𝑘 = 11
3.5 The equation of a “A line goes through the point (4,5) and is perpendicular to Don’t confuse 𝑥 and 𝑥1
straight line in the forms the line with equation 𝑦 = 2𝑥 + 6. Find the equation of the in the straight line
𝑦 = 𝑚𝑥 + 𝑐 and 𝑦 − 𝑦1 = line. Put your answer in the form 𝑦 = 𝑚𝑥 + 𝑐” equation. 𝑥1 and 𝑦1 are
𝑚(𝑥 − 𝑥1 ) For all these types of questions, we need (a) the gradient constants, representing
and (b) a point, in order to use 𝑦 − 𝑦1 = 𝑚(𝑥 − 𝑥1 ): the point (𝑥1 , 𝑦1 ) the
1 line goes through. 𝑥 and
𝑚=−
2 𝑦 meanwhile are
1 variables and must stay
𝑦 − 5 = − (𝑥 − 4)
2 as variables.
1
𝑦−5 =− 𝑥+2
2 Be careful with negative
1
𝑦=− 𝑥+7 values of 𝑥 or 𝑦, e.g. if
2
“Determine the coordinate of the point where this line 𝑚 = 3 and (−2,4) is the
crosses the 𝑥 axis” point, then:
1 𝑦 − 4 = 3(𝑥 + 2)
0 = − 𝑥 + 7 → 𝑥 = 14 → (14,0)
2
www.drfrostmaths.com 8
3.7 Understand the Circle with centre (𝑎, 𝑏) and radius 𝑟 is:
equation of a circle with (𝑥 − 𝑎)2 + (𝑦 − 𝑏)2 = 𝑟 2
any centre and radius.
Examples:
“A circle has equation (𝑥 + 3)2 + 𝑦 2 = 25. What is its
centre and radius?”
Centre: (−3,0) 𝑟 = 5
“Does the circle with equation 𝑥 2 + (𝑦 − 1)2 = 16 pass
through the point (2,5)?”
In general a point is on a line if it satisfies its equation.
22 + (5 − 1)2 = 16
20 = 16
So no, it is not on the circle.
“A circle has centre (3,4) and radius 5. Determine the
coordinates of the points where the circle intercepts the
𝑥 and 𝑦 axis.”
Firstly, equation of circle: (𝑥 − 3)2 + (𝑦 − 4)2 = 25
On 𝑥-axis: 𝑦 = 0:
(𝑥 − 3)2 + (0 − 4)2 = 25
(𝑥 − 3)2 = 9
𝑥 − 3 = ±3 → (0,0), (6,0)
On 𝑦-axis, 𝑥 = 0:
(0 − 3)2 + (𝑦 − 4)2 = 25
(𝑦 − 4)2 = 16
𝑦 − 4 = ±4 → (0,0), (0,8)
“𝐴(4,7) and 𝐵(10,15) are points on a circle and 𝐴𝐵 is
the diameter of the circle. Determine the equation of
the circle.”
We need to find radius and centre.
Centre is just midpoint of diameter: (7,11)
Radius using (4,7) and (7,11):
√Δ𝑥 2 + Δ𝑦 2 = √32 + 42 = 5
Equation: (𝑥 − 7)2 + (𝑦 − 11)2 = 25
See slides for harder questions of this type.
“𝑥 2 − 2𝑥 + 𝑦 2 − 6𝑦 = 0 is the equation of a circle.
Determine its centre and radius.”
Need to complete the square to get in usual form.
(𝑥 − 1)2 − 1 + (𝑦 − 3)2 − 9 = 0
(𝑥 − 1)2 + (𝑦 − 3)2 = 10
Centre: (1,3) 𝑟 = √10
4
Gradient of chord: − = −2 Midpoint of chord: (1,2)
2
1
Gradient of radius =
2
1
Equation of radius: 𝑦 − 2 = (𝑥 − 1)
2
1
If 𝑥 = 6: 𝑦 − 2 = (6 − 1)
2
𝑦 = 4.5
www.drfrostmaths.com 9
The tangent to a circle is perpendicular to the radius.
Example: “The equation of this circle is 𝑥 2 + 𝑦 2 = 20.
𝑃(4,2) is a point on the circle. Work out the equation of
the tangent to the circle at 𝑃, in the form 𝑦 = 𝑚𝑥 + 𝑐”
4. Calculus
Specification Notes What can go ugly
4.1 Know that the gradient Whereas with say 𝑦 = 3𝑥 + 2 the gradient is constant (𝑚 =
𝑑𝑦 𝑑𝑦
function gives the 3), with curves, the gradient depends on the point. is the
𝑑𝑥 𝑑𝑥
gradient of the curve and gradient function: it takes an 𝑥 value and gives you the
measures the rate of gradient at that point.
change of 𝑦 with respect to 𝑑𝑦
e.g. If = 2𝑥, then at (5,12), the gradient is 2 × 5 = 10.
𝑑𝑥
𝑥.
Technically this the gradient of the tangent at this point.
4.2 Know that the gradient 𝑑𝑦
Another way of interpreting is “the rate of change of 𝑦
of a function is the gradient 𝑑𝑥
of the tangent at that point. with respect to 𝑥.”
4.3 Differentiation of 𝑘𝑥 𝑛 Multiply by power and then reduce power by 1. Don’t forget that
where 𝑛 is a positive 𝑑𝑦 constants disappear
𝑦 = 𝑥3 → = 3𝑥 2
integer or 0, and the sum of 𝑑𝑥 when differentiated.
such functions. 𝑑𝑦 Common mistake is to
𝑦 = 5𝑥 2 → = 10𝑥
𝑑𝑥 reduce power by 1 then
𝑑𝑦 multiply by this new
𝑦 = 7𝑥 → =7
𝑑𝑥 power.
𝑑𝑦
𝑦 = −3 → =0
𝑑𝑥 1
Put expression in form 𝑘𝑥 𝑛 first, and split up any fractions. Don’t forget that =
√𝑥
1
Then differentiate. −
𝑥 with a negative
2
𝑦 = (2𝑥 + 1)2 = 4𝑥 2 + 4𝑥 + 1 power.
𝑑𝑦
= 8𝑥 + 4
𝑑𝑥
1 𝑑𝑦 1 −1
𝑦 = √𝑥 = 𝑥 2 = 𝑥 2
𝑑𝑥 2
1+𝑥 1 1
𝑦= = 𝑥 −2 + 𝑥 2
√𝑥
𝑑𝑦 1 3 1 1
= − 𝑥 −2 + 𝑥 −2
𝑑𝑥 2 2
4.4 The equation of a 𝑑𝑦 Don’t mix up the tangent
Use to find gradient at specific point (ensuring you use
𝑑𝑥
tangent and normal at any to the curve and the
the negative reciprocal if we want the normal). You may
point on a curve. normal to a curve (the
need to use the original equation to also find 𝑦.
latter which is
Then use 𝑦 − 𝑦1 = 𝑚(𝑥 − 𝑥1 )
perpendicular to the
Example: “Work out the equation of the tangent to the tangent).
curve 𝑦 = 𝑥 3 + 5𝑥 2 + 1 at the point where 𝑥 = −1.”
𝑑𝑦
= 3𝑥 2 + 10𝑥
𝑑𝑥
𝑚 = 3(−1)2 + 10(−1) = −7
𝑦 = (−1)3 + 5(−1)2 + 1 = 5
Therefore:
𝑦 − 5 = −7(𝑥 + 1)
www.drfrostmaths.com 10
4.5 Use of differentiation to At min/max points, the curve is flat, and the gradient Common error is to
find stationary points on a therefore 0. Use gradient value just before and after turning forget to find the 𝑦 value
curve: maxima, minima and point to work out what type it is. of the stationary point
points of inflection. when asked for the full
coordinate
5. Matrix Transformations
Specification Notes What can go ugly
5.1 Multiplication of Do each row of the first matrix ‘multiplied’ by each column When multiplying
matrices of the second. And by ‘multiply’, multiply each pair of matrices, doing each
number of numbers pairwise, and add these up. See my column in the first matrix
slides for suitable animation! e.g. multiplied by each row in
1 2 5 1×5+2×6 17 the second, rather than
( )( ) = ( )=( )
3 4 6 3×5+4×6 39 the correct way.
1 2 1 0 5 20
( )( )=( )
3 4 2 10 11 40
Important: When we multiply by a matrix, it goes on the
front. So 𝑨 multiplied by 𝑩 is 𝑩𝑨, not 𝑨𝑩.
5.2 The identity matrix, 1 0
𝑰=( )
𝑰 (2 × 2 only). 0 1
Just as ‘1’ is the identity in multiplication of numbers, as 𝑎 ×
1 = 𝑎 and 1 × 𝑎 = 𝑎 (i.e. multiplying by 1 has no effect), 𝑰 is
the same for matrices, i.e. 𝑨𝑰 = 𝑰𝑨 = 𝑨.
5.3 Transformations of the Matrices allow us to represent transformations such as
unit square in the 𝑥 − 𝑦 enlargements, rotations and reflections.
plane.
Example: “Find the matrix that represents the 90° clockwise
rotation of a 2D point about the origin.”
1
Easiest way to is to consider some arbitrary point, say ( ),
3
and use a sketch to see where it would be after the
3
transformation, in this case ( ). Thus more generically
−1
we’re looking for a matrix such that:
𝑥 𝑦
( ) (𝑦 ) = ( )
−𝑥
0 1
It is easy to see this will be ( )
−1 0
www.drfrostmaths.com 11
Using the same technique we can find:
0 −1
Rotation 90° anticlockwise about the origin: ( )
1 0
−1 0
Reflection 180° about the origin: ( )
0 −1
0 1
Reflection in the line 𝑦 = 𝑥: ( )
1 0
−1 0
Reflection in the line 𝑥 = 0: ( )
0 1
1 0
Reflection in the line 𝑦 = 0: ( )
0 −1
2 0
Enlargement scale factor 2 centre origin: ( )
0 2
Note that a rotation is anticlockwise if not specified.
0 1 1 0
The ‘unit’ square consists of the points ( ), ( ), ( ), ( ).
0 0 1 1
To find the effect of a transformation on a unit square, just
transform each point in turn.
e.g. “On the grid, draw the image of the unit square after it is
3 0
transformed using the matrix ( ).”
0 3
Transforming the second point for example we get:
3 0 1 3
( )( ) = ( )
0 3 0 0
5.4 Combination of The matrix 𝐵𝐴 represents the combined transformation of 𝐴 It is easy to accidentally
transformations. followed by 𝐵. Example: multiply the matrices the
−1 0 wrong way round. It
“A point 𝑃 is transformed using the matrix ( ), i.e. a
0 1 does matter which way
0 1
reflection in the line 𝑥 = 0, followed by ( ), i.e. a you multiply them!
1 0
reflection in the line 𝑦 = 𝑥.
(a) Give a single matrix which represents the
combined transformation.
(b) Describe geometrically the single transformation
this matrix represents.”
0 1 −1 0 0 1
(a) ( )( )=( )
1 0 0 1 −1 0
(b) Rotation 90° clockwise about the origin.
www.drfrostmaths.com 12
6. Geometry
Specification Notes What can go ugly
6.1 Perimeter and area of
common shapes including
1
area of triangle 𝑎𝑏 sin 𝐶
2
and volumes of solids.
Circle Theorems.
6.2 Geometric proof: Examples: “Triangle 𝐴𝐵𝐶 is isosceles Not given reasons for
Understand and construct with 𝐴𝐶 = 𝐵𝐶. Triangle 𝐶𝐷𝐸 is isosceles each angle. Angles (and
geometric proofs using with 𝐶𝐷 = 𝐶𝐸. 𝐴𝐶𝐷 and 𝐷𝐸𝐹 are their reasons) not being
formal arguments. straight lines. given in a logical
(a) Prove that angle 𝐷𝐶𝐸 = 2𝑥 and (b) sequence.
Prove that 𝐷𝐹 is perpendicular to 𝐴𝐵” Misremembering Circle
Make clear at each point what the angle Theorems! (learn the
is you’re calculating, with an appropriate wording of these
reason. It may help to work out the angles on the diagram verbatim)
first, before writing out the steps.
(a) ∠𝐶𝐵𝐴 = 𝑥 (base angles of isosceles triangle are
equal)
∠𝐴𝐶𝐵 = 180 − 2𝑥 (angles in Δ𝐴𝐵𝐶 add to 180)
∠𝐷𝐶𝐸 = 2𝑥 (angles on straight line add to 180)
180−2𝑥
(b) ∠𝐷𝐸𝐶 = = 90 − 𝑥 (base angles of
2
isosceles triangle are equal)
∠𝐷𝐹𝐴 = 180 − (90 − 𝑥) − 𝑥 = 90°
∴ 𝐷𝐹 is perpendicular to 𝐴𝐵.
(In general with proofs it’s good to end by restating the thing
you’re trying to prove)
www.drfrostmaths.com 13
6.4 Use of Pythagoras’ We often have to form a 2D
Theorem in 2D and 3D. triangle ‘floating’ in 3D.
e.g. “Find the length of the
diagonal joining opposite
corners of a unit cube.”
We want the hypotenuse of the
indicated shaded triangle. First
use Pythagoras on base of cube
to get √2 bottom length of triangle. Then required length is
√2 + 12 = √3.
6.5 Find angle between a “(a) Work out the angle In (b) in the example, we
line and a plane, and the between line 𝑉𝐴 and might accidentally find
angle between two planes. plane 𝐴𝐵𝐶𝐷.” the angle between VQ
I use what I call the ‘pen and the plane (this angle
drop’ strategy. If a pen will be too steep).
was the line VA and I
dropped it onto the plane
(ABCD), it would fall to
AX. Thus the angle we’re
after is between VA and
AX. By using simple trig on the triangle VAX (and using
Pythagoras on the square base to get 𝐴𝑋 = √34), we get
5
∠𝑉𝐴𝑋 = tan−1 ( )
√34
(b) “Work out the angle between the planes 𝑉𝑄𝑅 and
𝑃𝑄𝑅𝑆.”
When the angle is between planes, our
‘pen’ this time must be perpendicular
to the line formed by the intersection
of the two planes. Thus we put our
‘pen’ between 𝑉 and the midpoint of
𝑅𝑄. We then drop the ‘pen’ onto the
plane 𝑃𝑄𝑆𝑅. We get the pictured triangle.
6.6 Graphs 𝑦 = sin 𝑥 , 𝑦 = 𝑦 = sin 𝑥 𝑦 = tan 𝑥
cos 𝑥 , 𝑦 = tan 𝑥 for 0° ≤
𝑥 ≤ 360°
𝑦 = cos 𝑥
www.drfrostmaths.com 14
6.8 Knowledge and use of We can use half a unit square (which has angles
30°, 60°, 90° triangles and 45°, 45°, 90°) and half an equilateral triangle originally with
45°, 45°, 90°. sides 2 (angles 30°, 60°, 90°), as pictured below, to get exact
values of sin 30° , sin 45°, etc. We use Pythagoras to obtain
the remaining side length.
cos2 𝜃 ≡ cos2 𝜃
1 1
“Prove that 𝑡𝑎𝑛 𝜃 + ≡ ”
𝑡𝑎𝑛 𝜃 𝑠𝑖𝑛 𝜃 𝑐𝑜𝑠 𝜃
Generally a good idea to combine any fractions into one.
sin 𝜃 cos 𝜃 1
+ ≡
cos 𝜃 sin 𝜃 sin 𝜃 cos 𝜃
sin2 𝜃 + cos2 𝜃 1
≡
sin 𝜃 cos 𝜃 sin 𝜃 cos 𝜃
1 1
≡
sin 𝜃 cos 𝜃 sin 𝜃 cos 𝜃
See my slides for more examples.
6.10 Solution of simple “Solve 𝒔𝒊𝒏(𝒙) = −𝟎. 𝟑 in the range 𝟎° ≤ 𝒙 < 𝟑𝟔𝟎°” One of two main risks:
trigonometric equations in 𝑥 = sin−1 (−0.3) = −17.46° (a) Missing out solutions,
given intervals. At this point, we use the rules in [6.7] to get the solutions in either because we
the range provided. We usually get a pair of solutions for haven’t used all the
each 360° interval: applicable rules in 6.7, or
180 − −17.46 = 197.46° (since sin(𝑥) = sin(180° − 𝑥)) we’ve forgotten the
−17.46° + 360° = 342.54° (since sin repeats every 360°) negative solution when
square rooting both
“Solve 𝟐 𝒕𝒂𝒏(𝒙) = 𝟏 in the range 𝟎° ≤ 𝒙 < 𝟑𝟔𝟎°” sides (where applicable).
1 In tan2 𝜃 + 3 tan 𝜃 = 0,
tan(𝑥) =
2 it would be wrong to
1 divide by tan 𝜃 because
𝑥 = tan−1 ( ) = 26.6°
2 we lose the solution
26.6° + 180° = 206.6° (tan repeats every 180°) where tan 𝜃 = 0 (in
general, never divide
“Solve 𝒔𝒊𝒏 𝒙 = 𝟐 𝒄𝒐𝒔 𝒙 in the range 𝟎° ≤ 𝒙 < 𝟑𝟔𝟎°” both sides of an
When you have a mix of 𝑠𝑖𝑛 and 𝑐𝑜𝑠 (neither squared), equation by an
divide both sides of the equation by 𝑐𝑜𝑠: expression involving a
tan 𝑥 = 2 variable – always
𝑥 = tan−1 (2) = 63.4°, 243.4° factorise!)
“Solve 𝒕𝒂𝒏𝟐 𝜽 + 𝟑 𝒕𝒂𝒏 𝜽 = 𝟎 in the range 𝟎° ≤ 𝒙 < 𝟑𝟔𝟎°” (b) Mixing up the rules in
Factorising: tan 𝜃 (tan 𝜃 + 3) = 0 6.7, e.g. doing 180 −
tan 𝜃 = 0 𝑜𝑟 tan 𝜃 = −3 when you were
𝜃 = 0°, 180°, − 71.6°, 108.4°, 288.4° supposed to 360 −
(Cross out any solutions outside the range, i.e. −71.6°)
www.drfrostmaths.com 15
𝟏
“Solve 𝒄𝒐𝒔𝟐 𝜽 = in the range 𝟎° ≤ 𝒙 < 𝟑𝟔𝟎°”
𝟒
1 1
You get both cos 𝜃 = and cos 𝜃 = − , so solve both!
2 2
www.drfrostmaths.com 16