Embedded Linux 4d Slides PDF

Embedded Linux system development
Embedded Linux system

development
© Copyright 2004-2020, Bootlin.

Creative Commons BY-SA 3.0 license.
Latest update: June 3, 2020.
Document updates and sources:

https://bootlin.com/doc/training/embedded- linux
Corrections, suggestions, contributions and translations are welcome! embedded Linux and kernel engineering
Send them to [email protected]
- Kernel, drivers and embedded Linux - Development, consulting, training and support - https://bootlin.com 1/392
Rights to copy
© Copyright 2004-2020, Bootlin

License: Creative Commons Attribution - Share Alike 3.0
https://creativecommons.org/licenses/by-sa/3.0/legalcode
You are free:
▶ to copy, distribute, display, and perform the work
▶ to make derivative works
▶ to make commercial use of the work
Under the following conditions:
▶ Attribution. You must give the original author credit.
▶ Share Alike. If you alter, transform, or build upon this work, you may distribute the resulting work only
under a license identical to this one.
▶ For any reuse or distribution, you must make clear to others the license terms of this work.
▶ Any of these conditions can be waived if you get permission from the copyright holder.
Your fair use and other rights are in no way affected by the above.
Document sources: https://github.com/bootlin/training-materials/
Hyperlinks in the document
There are many hyperlinks in the document

▶ Regular hyperlinks:
https://kernel.org/
▶ Kernel documentation links:
dev-tools/kasan
▶ Links to kernel source files and directories:
drivers/input/
include/linux/fb.h
▶ Links to the declarations, definitions and instances of kernel symbols (functions,
types, data, structures):
platform_get_irq()
GFP_KERNEL
struct file_operations
Company at a glance
▶ Engineering company created in 2004, named ”Free Electrons” until Feb. 2018.
▶ Locations: Orange, Toulouse, Lyon (France)
▶ Serving customers all around the world
▶ Head count: 12 - Only Free Software enthusiasts!
▶ Focus: Embedded Linux, Linux kernel, build systems and low level Free and Open
Source Software for embedded and real-time systems.
▶ Bootlin is often in the top 20 companies contributing to the Linux kernel.
▶ Activities: development, training, consulting, technical support.
▶ Added value: get the best of the user and development community and the
resources it offers.
Bootlin on-line resources
▶ All our training materials and technical

presentations:
https://bootlin.com/docs/
▶ Technical blog:
https://bootlin.com/
▶ Quick news (Mastodon):
https://fosstodon.org/@bootlin
▶ Quick news (Twitter):
https://twitter.com/bootlincom
Mastodon is a free and decentralized
▶ News and discussions (LinkedIn):
social network created in the best
https://www.linkedin.com/groups/4501089 interests of its users.
▶ Elixir - browse Linux kernel sources on-line:
Image credits: Jin Nguyen - https://frama.link/bQwcWHTP
https://elixir.bootlin.com
Generic course information
Generic course
information

embedded Linux and kernel engineering
Corrections, suggestions, contributions and translations are welcome!
Hardware used in this training session
Using STMicroelectronics STM32MP157A-DK1 Discovery boards in all practical labs

▶ STM32MP157A (Dual Cortex-A7 + Cortex-M4) CPU
from STMicroelectronics
▶ 512 MB DDR3L RAM
▶ Gigabit Ethernet port
▶ 4 USB 2.0 host ports
▶ 1 USB-C OTG port
▶ 1 Micro SD slot
▶ On-board ST-LINK/V2-1 debugger
▶ Misc: buttons, LEDs, Audio codec
▶ Currently sold at 65 EUR by Mouser
Board and CPU documentation, design files, software:

https://www.st.com/en/evaluation-tools/stm32mp157a-dk1.html
Shopping list: hardware for this course
▶ STMicroelectronics STM32MP157A-DK1 Discovery kit - Available

from Mouser
▶ USB-C Cable
▶ Micro USB Cable
▶ Logitech USB H340 audio headsets
https://support.logitech.com/en_us/product/usb-headset-h340
▶ An SD card with at least 128 MB of capacity
Participate!
During the lectures...

▶ Don’t hesitate to ask questions. Other people in the audience may have similar
questions too.
▶ This helps the trainer to detect any explanation that wasn’t clear or detailed
enough.
▶ Don’t hesitate to share your experience, for example to compare Linux with other
operating systems used in your company.
▶ Your point of view is most valuable, because it can be similar to your colleagues’
and different from the trainer’s.
▶ Your participation can make our session more interactive and make the topics
easier to learn.
Practical lab guidelines
During practical labs...

▶ We cannot support more than 8 workstations at once (each with its board and
equipment). Having more would make the whole class progress slower,
compromising the coverage of the whole training agenda (exception for public
sessions: up to 10 people).
▶ So, if you are more than 8 participants, please form up to 8 working groups.
▶ Open the electronic copy of your lecture materials, and use it throughout the
practical labs to find the slides you need again.
▶ Don’t hesitate to copy and paste commands from the PDF slides and labs.
Advise: write down your commands!
During practical labs, write down all your commands in a text file.
▶ You can save a lot of time re-using commands Lab commands
in later labs. Cross-compiling kernel:

export ARCH=arm
▶ This helps to replay your work if you make export CROSS_COMPILE=arm-linux-
make sama5_defconfig
significant mistakes.
Booting kernel through tftp:
▶ You build a reference to remember commands setenv bootargs console=ttyS0 root=/dev/nfs
setenv bootcmd tftp 0x21000000 zImage; tftp
in the long run. 0x22000000 dtb; bootz 0x21000000 - 0x2200...
▶ That’s particular useful to keep kernel Making ubifs images:

mkfs.ubifs -d rootfs -o root.ubifs -e 124KiB
command line settings that you used earlier. -m 2048 -c 1024
▶ Also useful to get help from the instructor, Encountered issues:

Restart NFS server after editing /etc/exports!
showing the commands that you run.
gedit ~/lab-history.txt
Cooperate!
As in the Free Software and Open Source community, cooperation during practical labs
is valuable in this training session:
▶ If you complete your labs before other people, don’t hesitate to help other people
and investigate the issues they face. The faster we progress as a group, the more
time we have to explore extra topics.
▶ Explain what you understood to other participants when needed. It also helps to
consolidate your knowledge.
▶ Don’t hesitate to report potential bugs to your instructor.
▶ Don’t hesitate to look for solutions on the Internet as well.
Command memento sheet
▶ This memento sheet gives command examples

for the most typical needs (looking for files,
extracting a tar archive...)
▶ It saves us 1 day of UNIX / Linux command
line training.
▶ Our best tip: in the command line shell, always
hit the Tab key to complete command names
and file paths. This avoids 95% of typing
mistakes.
▶ Get an electronic copy on
https://bootlin.com/doc/legacy/command-
line/command_memento.pdf
vi basic commands
▶ The vi editor is very useful to make quick

changes to files in an embedded target.
▶ Though not very user friendly at first, vi is
very powerful and its main 15 commands are
easy to learn and are sufficient for 99% of
everyone’s needs!
▶ Get an electronic copy on
https://bootlin.com/doc/legacy/command-
line/vi_memento.pdf
▶ You can also take the quick tutorial by running
vimtutor. This is a worthy investment!
Introduction to Embedded Linux
Introduction to
Embedded Linux

Birth of Free Software
▶ 1983, Richard Stallman, GNU project and the free

software concept. Beginning of the development of gcc,
gdb, glibc and other important tools
▶ 1991, Linus Torvalds, Linux kernel project, a UNIX-like
operating system kernel. Together with GNU software and
many other open-source components: a completely free
operating system, GNU/Linux
▶ 1995, Linux is more and more popular on server systems
▶ 2000, Linux is more and more popular on embedded
systems Richard Stallman in 2019
▶ 2008, Linux is more and more popular on mobile devices Image credits (Wikipedia):
https://frama.link/qC73jkk4
▶ 2010, Linux is more and more popular on phones
Free software?
▶ A program is considered free when its license offers to all its users the following
four freedoms
▶ Freedom to run the software for any purpose
▶ Freedom to study the software and to change it
▶ Freedom to redistribute copies
▶ Freedom to distribute copies of modified versions
▶ These freedoms are granted for both commercial and non-commercial use
▶ They imply the availability of source code, software can be modified and
distributed to customers
▶ Good match for embedded systems!
What is embedded Linux?
Embedded Linux is the usage of the Linux

kernel and various open-source components
in embedded systems
Advantages of Linux and open-source for

embedded systems
Re-using components
▶ The key advantage of Linux and open-source in embedded systems is the ability
to re-use components
▶ The open-source ecosystem already provides many components for standard
features, from hardware support to network protocols, going through multimedia,
graphic, cryptographic libraries, etc.
▶ As soon as a hardware device, or a protocol, or a feature is wide-spread enough,
high chance of having open-source components that support it.
▶ Allows to quickly design and develop complicated products, based on existing
components.
▶ No-one should re-develop yet another operating system kernel, TCP/IP stack,
USB stack or another graphical toolkit library.
▶ Allows to focus on the added value of your product.
Low cost
▶ Free software can be duplicated on as many devices as you want, free of charge.
▶ If your embedded system uses only free software, you can reduce the cost of
software licenses to zero. Even the development tools are free, unless you choose
a commercial embedded Linux edition.
▶ Of course, using Linux is not free of cost. You still need substantial learning and
engineering efforts to achieve your goals.
▶ Allows to have a higher budget for the hardware or to increase the
company’s skills and knowledge
Full control
▶ With open-source, you have the source code for all components in your system
▶ Allows unlimited modifications, changes, tuning, debugging, optimization, for an
unlimited period of time
▶ Without lock-in or dependency from a third-party vendor
▶ To be true, non open-source components must be avoided when the system is
designed and developed
▶ Allows to have full control over the software part of your system and
secure your investment
Quality
▶ Many open-source components are widely used, on millions of systems

▶ Usually higher quality than what an in-house development can produce, or even
proprietary vendors
▶ Of course, not all open-source components are of good quality, but most of the
widely-used ones are.
▶ Allows to design your system with high-quality components at the
foundations
Eases testing of new features
▶ Open-source being freely available, it is easy to get a piece of software and

evaluate it
▶ Allows to easily study several options while making a choice
▶ Much easier than purchasing and demonstration procedures needed with most
proprietary products
▶ Allows to easily explore new possibilities and solutions
Community support
▶ Open-source software components are developed by communities of developers

and users
▶ This community can provide high-quality support: you can directly contact the
main developers of the component you are using. The likelyhood of getting an
answer doesn’t depend what company you work for.
▶ Often better than traditional support, but one needs to understand how the
community works to properly use the community support possibilities
▶ Allows to speed up the resolution of problems when developing your system
Taking part into the community
▶ Possibility of taking part into the development community of some of the

components used in the embedded systems: bug reporting, test of new versions or
features, patches that fix bugs or add new features, etc.
▶ Most of the time the open-source components are not the core value of the
product: it’s the interest of everybody to contribute back.
▶ For the engineers: a very motivating way of being recognized outside the
company, communication with others in the same field, opening of new
possibilities, etc.
▶ For the managers: motivation factor for engineers, allows the company to be
recognized in the open-source community and therefore get support more easily
and be more attractive to open-source developers
A few examples of embedded systems running

Linux
Wireless routers
Image credits: Evan Amos (https://bit.ly/2JzDIkv)

Video systems
Image credits: https://bit.ly/2HbwyVq

Bike computers
Product from BLOKS (http://bloks.de).

Permission to use this picture only in this document, in updates and in translations.
Robots
eduMIP robot (https://www.ucsdrobotics.org/edumip)

Viticulture machine
Embedded hardware for Linux systems
Processor and architecture (1)
The Linux kernel and most other architecture-dependent components support a wide
range of 32 and 64 bits architectures
▶ x86 and x86-64, as found on PC platforms, but also embedded systems
(multimedia, industrial)
▶ ARM, with hundreds of different SoCs (all sorts of products)
▶ RiscV, the rising architecture with a free instruction set (from high-end cloud
computing to the smallest embedded systems)
▶ PowerPC (mainly real-time, industrial applications)
▶ MIPS (mainly networking applications)
▶ SuperH (mainly set top box and multimedia applications)
▶ c6x (TI DSP architecture)
▶ Microblaze (soft-core for Xilinx FPGA)
▶ Others: ARC, m68k, Xtensa...
Processor and architecture (2)
▶ Both MMU and no-MMU architectures are supported, even though no-MMU
architectures have a few limitations.
▶ Linux does not support small microcontrollers (8 or 16 bit)
▶ Besides the toolchain, the bootloader and the kernel, all other components are
generally architecture-independent
RAM and storage
▶ RAM: a very basic Linux system can work within 8 MB of RAM, but a more
realistic system will usually require at least 32 MB of RAM. Depends on the type
and size of applications.
▶ Storage: a very basic Linux system can work within 4 MB of storage, but usually
more is needed.
▶ Flash storage is supported, both NAND and NOR flash, with specific filesystems
▶ Block storage including SD/MMC cards and eMMC is supported
▶ Not necessarily interesting to be too restrictive on the amount of RAM/storage:
having flexibility at this level allows to re-use as many existing components as
possible.
Communication
▶ The Linux kernel has support for many common communication buses
▶ I2C
▶ SPI
▶ CAN
▶ 1-wire
▶ SDIO
▶ USB
▶ And also extensive networking support
▶ Ethernet, Wifi, Bluetooth, CAN, etc.
▶ IPv4, IPv6, TCP, UDP, SCTP, DCCP, etc.
▶ Firewalling, advanced routing, multicast
Types of hardware platforms (1)
▶ Evaluation platforms from the SoC vendor. Usually

expensive, but many peripherals are built-in. Generally
unsuitable for real products. STM32MP157C-EV1
evaluation board
▶ Component on Module, a small board with only Image credits (st.com):
https://frama.link/cFseMy8H
CPU/RAM/flash and a few other core components, with
connectors to access all other peripherals. Can be used to
build end products for small to medium quantities.
PocketBeagle
Image credits (Beagleboard.org):
https://beagleboard.org/pocket
Types of hardware platforms (2)
▶ Community development platforms, to make a particular SoC popular and

easily available. These are ready-to-use and low cost, but usually have less
peripherals than evaluation platforms. To some extent, can also be used for real
products.
▶ Custom platform. Schematics for evaluation boards or development platforms
are more and more commonly freely available, making it easier to develop custom
platforms.
Criteria for choosing the hardware
▶ Make sure the hardware you plan to use is already supported by the Linux kernel,
and has an open-source bootloader, especially the SoC you’re targeting.
▶ Having support in the official versions of the projects (kernel, bootloader) is a lot
better: quality is better, and new versions are available.
▶ Some SoC vendors and/or board vendors do not contribute their changes back to
the mainline Linux kernel. Ask them to do so, or use another product if you can.
A good measurement is to see the delta between their kernel and the official one.
▶ Between properly supported hardware in the official Linux kernel and
poorly-supported hardware, there will be huge differences in development
time and cost.
Embedded Linux system architecture
Host and target
Software components
▶ Cross-compilation toolchain
▶ Compiler that runs on the development machine, but generates code for the target
▶ Bootloader
▶ Started by the hardware, responsible for basic initialization, loading and executing
the kernel
▶ Linux Kernel
▶ Contains the process and memory management, network stack, device drivers and
provides services to user space applications
▶ C library
▶ The interface between the kernel and the user space applications
▶ Libraries and applications
▶ Third-party or in-house
Embedded Linux work
Several distinct tasks are needed when deploying embedded Linux in a product:
▶ Board Support Package development
▶ A BSP contains a bootloader and kernel with the suitable device drivers for the
targeted hardware
▶ Purpose of our Kernel Development training
▶ System integration
▶ Integrate all the components, bootloader, kernel, third-party libraries and
applications and in-house applications into a working system
▶ Purpose of this training
▶ Development of applications
▶ Normal Linux applications, but using specifically chosen libraries
Embedded Linux development environment
Embedded Linux
development
environment

Embedded Linux solutions
▶ Two ways to switch to embedded Linux

▶ Use solutions provided and supported by vendors like MontaVista, Wind River or
TimeSys. These solutions come with their own development tools and environment.
They use a mix of open-source components and proprietary tools.
▶ Use community solutions. They are completely open, supported by the community.
▶ In Bootlin training sessions, we do not promote a particular vendor, and therefore
use community solutions
▶ However, knowing the concepts, switching to vendor solutions will be easy
OS for Linux development
We strongly recommend to use GNU/Linux as the desktop operating system to
embedded Linux developers, for multiple reasons.
▶ All community tools are developed and designed to run on Linux. Trying to use
them on other operating systems (Windows, Mac OS X) will lead to trouble, and
their usage on these systems is generally not supported by community developers.
▶ As Linux also runs on the embedded device, all the knowledge gained from using
Linux on the desktop will apply similarly to the embedded device.
▶ If you are stuck with a Windows desktop, at least you should use GNU/Linux in a
virtual machine (such as VirtualBox which is open source), though there could be
a small performance penalty.
:-)
Desktop Linux distribution
▶ Any good and sufficiently recent Linux desktop

distribution can be used for the development
workstation
▶ Ubuntu, Debian, Fedora, openSUSE, Red Hat, etc.
▶ We have chosen Ubuntu, as it is a widely used and
easy to use desktop Linux distribution
▶ The Ubuntu setup on the training laptops has
intentionally been left untouched after the normal
installation process. Learning embedded Linux is also
about learning the tools needed on the development
workstation!
Linux root and non-root users
▶ Linux is a multi-user operating system

▶ The root user is the administrator, and it can do privileged operations such as:
mounting filesystems, configuring the network, creating device files, changing the
system configuration, installing or removing software
▶ All other users are unprivileged, and cannot perform these administrator-level
operations
▶ On an Ubuntu system, it is not possible to log in as root, only as a normal user.
▶ The system has been configured so that the user account created first is allowed
to run privileged operations through a program called sudo.
▶ Example: sudo mount /dev/sda2 /mnt/disk
Software packages
▶ The distribution mechanism for software in GNU/Linux is different from the one
in Windows
▶ Linux distributions provides a central and coherent way of installing, updating and
removing applications and libraries: packages
▶ Packages contains the application or library files, and associated
meta-information, such as the version and the dependencies
▶ .deb on Debian and Ubuntu, .rpm on Red Hat, Fedora, openSUSE
▶ Packages are stored in repositories, usually on HTTP or FTP servers
▶ You should only use packages from official repositories for your distribution, unless
strictly required.
▶ Note: Snap and Flatpak offer new ways of packaging applications in a
self-contained way. See https://www.atechtown.com/flatpak-vs-snap/.
Managing software packages (1)
Instructions for Debian based GNU/Linux systems

(Debian, Ubuntu...)
▶ Package repositories are specified in /etc/apt/sources.list
▶ To update package repository lists:
sudo apt update
▶ To find the name of a package to install, the best is to use the search engine on
https://packages.debian.org or on https://packages.ubuntu.com. You may
also use:
apt-cache search <keyword>
Managing software packages (2)
▶ To install a given package:

sudo apt install <package>
▶ To remove a given package:
sudo apt remove <package>
▶ To install all available package updates:
sudo apt dist-upgrade
▶ Get information about a package:
apt-cache show <package>
▶ Graphical interfaces
▶ Synaptic for GNOME
▶ KPackageKit for KDE
Further details on package management:

https://www.debian.org/doc/manuals/debian-reference/ch02.en.html
Host vs. target
▶ When doing embedded development, there is always a split between

▶ The host, the development workstation, which is typically a powerful PC
▶ The target, which is the embedded system under development
▶ They are connected by various means: almost always a serial line for debugging
purposes, frequently an Ethernet connection, sometimes a JTAG interface for
low-level debugging
Serial line communication program
▶ An essential tool for embedded development is a serial line communication

program, like HyperTerminal in Windows.
▶ There are multiple options available in Linux: Minicom, Picocom, Gtkterm, Putty,
screen, etc.
▶ In this training session, we recommend using the simplest of them: picocom
▶ Installation with sudo apt install picocom
▶ Run with picocom -b BAUD_RATE /dev/SERIAL_DEVICE
▶ Exit with Control-A Control-X
▶ SERIAL_DEVICE is typically
▶ ttyUSBx for USB to serial converters
▶ ttySx for real serial ports
Command line tips
▶ Using the command line is mandatory for many operations needed for embedded
Linux development
▶ It is a very powerful way of interacting with the system, with which you can save
a lot of time.
▶ Some useful tips
▶ You can use several tabs in the Gnome Terminal
▶ Remember that you can use relative paths (for example: ../../linux) in addition
to absolute paths (for example: /home/user)
▶ In a shell, hit [Control] [r], then a keyword, will search through the command
history. Hit [Control] [r] again to search backwards in the history
▶ You can copy/paste paths directly from the file manager to the terminal by
drag-and-drop.
Practical lab - Training Setup
Prepare your lab environment

▶ Download and extract the lab archive
Cross-compiling toolchains
Cross-compiling
toolchains

Definition and Components
Toolchain definition (1)
▶ The usual development tools available on a GNU/Linux workstation is a native

toolchain
▶ This toolchain runs on your workstation and generates code for your workstation,
usually x86
▶ For embedded system development, it is usually impossible or not interesting to
use a native toolchain
▶ The target is too restricted in terms of storage and/or memory
▶ The target is very slow compared to your workstation
▶ You may not want to install all development tools on your target.
▶ Therefore, cross-compiling toolchains are generally used. They run on your
workstation but generate code for your target.
Toolchain definition (2)
Machines in build procedures
▶ Three machines must be distinguished when discussing toolchain creation

▶ The build machine, where the toolchain is built.
▶ The host machine, where the toolchain will be executed.
▶ The target machine, where the binaries created by the toolchain are executed.
▶ Four common build types are possible for toolchains
Different toolchain build procedures
Components
Binutils
▶ Binutils is a set of tools to generate and manipulate binaries for a given CPU
architecture
▶ as, the assembler, that generates binary code from assembler source code
▶ ld, the linker
▶ ar, ranlib, to generate .a archives, used for libraries
▶ objdump, readelf, size, nm, strings, to inspect binaries. Very useful analysis tools!
▶ objcopy, to modify binaries
▶ strip, to strip parts of binaries that are just needed for debugging (reducing their
size).
▶ https://www.gnu.org/software/binutils/
▶ GPL license
Kernel headers (1)
▶ The C library and compiled programs needs to

interact with the kernel
▶ Available system calls and their numbers
▶ Constant definitions
▶ Data structures, etc.
▶ Therefore, compiling the C library requires
kernel headers, and many applications also
require them.
▶ Available in <linux/...> and <asm/...> and
a few other directories corresponding to the
ones visible in include/ in the kernel sources
Kernel headers (2)
▶ System call numbers, in <asm/unistd.h>

#define __NR_exit 1
#define __NR_fork 2
#define __NR_read 3
▶ Constant definitions, here in <asm-generic/fcntl.h>, included from
<asm/fcntl.h>, included from <linux/fcntl.h>
#define O_RDWR 00000002
▶ Data structures, here in <asm/stat.h>
struct stat {
unsigned long st_dev;
unsigned long st_ino;
[...]
};
Kernel headers (3)
▶ The kernel to user space ABI is backward compatible

▶ ABI = Application Binary Interface
We’re talking about binary compatibility
▶ Binaries generated with a toolchain using kernel headers older than the running
kernel will work without problem, but won’t be able to use the new system calls,
data structures, etc.
▶ Binaries generated with a toolchain using kernel headers newer than the running
kernel might work on if they don’t use the recent features, otherwise they will break
▶ Using the latest kernel headers is not necessary, unless access to the new kernel
features is needed
▶ The kernel headers are extracted from the kernel sources using the
headers_install kernel Makefile target.
C/C++ compiler
▶ GCC: GNU Compiler Collection, the famous free software

compiler
▶ https://gcc.gnu.org/
▶ Can compile C, C++, Ada, Fortran, Java, Objective-C,
Objective-C++, Go, etc. Can generate code for a large number
of CPU architectures, including ARM, AVR, Blackfin, CRIS,
FRV, M32, MIPS, MN10300, PowerPC, SH, v850, x86, x86_64,
IA64, Xtensa, etc.
▶ Available under the GPL license, libraries under the GPL with
linking exception.
▶ Alternative: Clang / LLVM compiler
(https://clang.llvm.org/) getting increasingly popular and
able to compile most programs (license: MIT/BSD type)
C library
▶ The C library is an essential component of a

Linux system
by Shmuel Csaba Otto Traian; GNU FDL 1.3 & CC-BY-SA 3.0; created 2014-02-27, last updated 2014-03-25
Application
▶ Interface between the applications and the POSIX-compatible
n
tio
nc lls
kernel fu
ca
BusyBox
▶ Provides the well-known standard C API to

Linux
memory
et al.
manager
m calls
Virtual
IPC syste
file
ease application development

manager
system Linux
process
scheduler
syste
m calls
▶ Several C libraries are available: glibc, uClibc, I/O

interface
Network
interface
fu
musl, klibc, newlib...

nc
ca tion
lls
Linux-specific
▶ The choice of the C library must be made at Application
cross-compiling toolchain generation time, as

the GCC compiler is compiled against a specific Source: Wikipedia (https://bit.ly/2zrGve2)
C library.
Comparing libcs by feature: https://www.etalabs.net/compare_libcs.html
C Libraries
glibc
▶ License: LGPL
▶ C library from the GNU project
▶ Designed for performance, standards compliance and
portability
▶ Found on all GNU / Linux host systems
▶ Of course, actively maintained
▶ By default, quite big for small embedded systems. On
armv7hf, version 2.23: libc: 1.5 MB, libm: 492 KB,
source: https://toolchains.bootlin.com
▶ But some features not needed in embedded systems can
be configured out (merged from the old eglibc project).
▶ https://www.gnu.org/software/libc/
Image: https://bit.ly/2EzHl6m
uClibc-ng
▶ https://uclibc-ng.org/
▶ A continuation of the old uClibc project, license: LGPL
▶ Lightweight C library for small embedded systems
▶ High configurability: many features can be enabled or disabled through a
menuconfig interface.
▶ Supports most embedded architectures, including MMU-less ones (ARM Cortex-M,
Blackfin, etc.). The only library supporting ARM noMMU.
▶ No guaranteed binary compatibility. May need to recompile applications when the
library configuration changes.
▶ Some glibc features may not be implemented yet (real-time, floating-point
operations...)
▶ Focus on size rather than performance
▶ Size on armv7hf, version 1.0.24: libc: 652 KB, source:
https://toolchains.bootlin.com
▶ Actively supported, but Yocto Project stopped supporting it.
musl C library
https://www.musl-libc.org/
▶ A lightweight, fast and simple library for embedded systems
▶ Created while uClibc’s development was stalled
▶ In particular, great at making small static executables
▶ More permissive license (MIT), making it easier to release static
executables. We will talk about the requirements of the LGPL license
(glibc, uClibc) later.
▶ Supported by build systems such as Buildroot and Yocto Project.
▶ Used by the Alpine Linux distribution
(https://www.alpinelinux.org/), fitting in about 130 MB of
storage.
glibc vs uclibc-ng vs musl - small static executables
Let’s compile and strip a hello.c program statically and compare the size
▶ With gcc 6.3, armel, musl 1.1.16:
7300 bytes
▶ With gcc 6.3, armel, uclibc-ng 1.0.22 :
67204 bytes.
▶ With gcc 6.2, armel, glibc:
492792 bytes
glibc vs uclibc vs musl (static)
Let’s compile and strip BusyBox 1.26.2 statically and compare the size
▶ With gcc 6.3, armel, musl 1.1.16:
183348 bytes
▶ With gcc 6.3, armel, uclibc-ng 1.0.22 :
210620 bytes.
▶ With gcc 6.2, armel, glibc:
755088 bytes
Notes:
▶ BusyBox is automatically compiled with -Os and stripped.
▶ Compiling with shared libraries will mostly eliminate size differences
Other smaller C libraries
▶ Several other smaller C libraries have been developed, but none of them have the
goal of allowing the compilation of large existing applications
▶ They can run only relatively simple programs, typically to make very small static
executables and run in very small root filesystems.
▶ Choices:
▶ Newlib, https://sourceware.org/newlib/
▶ Klibc, https://kernel.org/pub/linux/libs/klibc/, designed for use in an
initramfs or initrd at boot time.
Advise for choosing the C library
▶ Advice to start developing and debugging your applications with glibc, which is
the most standard solution.
▶ Then, when everything works, if you have size constraints, try to compile your app
and then the entire filesystem with uClibc or musl.
▶ If you run into trouble, it could be because of missing features in the C library.
▶ In case you wish to make static executables, musl will be an easier choice.
Toolchain Options
ABI
▶ When building a toolchain, the ABI used to generate binaries needs to be defined
▶ ABI, for Application Binary Interface, defines the calling conventions (how
function arguments are passed, how the return value is passed, how system calls
are made) and the organization of structures (alignment, etc.)
▶ All binaries in a system are typically compiled with the same ABI, and the kernel
must understand this ABI.
▶ On ARM, two main ABIs: OABI and EABI
▶ Nowadays everybody uses EABI
▶ On MIPS, several ABIs: o32, o64, n32, n64
▶ https://en.wikipedia.org/wiki/Application_Binary_Interface
Floating point support
▶ Some processors have a floating point unit, some others do not.

▶ For example, many ARMv4 and ARMv5 CPUs do not have a floating point unit.
Since ARMv7, a VFP unit is mandatory.
▶ For processors having a floating point unit, the toolchain should generate hard
float code, in order to use the floating point instructions directly
▶ For processors without a floating point unit, two solutions
▶ Generate hard float code and rely on the kernel to emulate the floating point
instructions. This is very slow.
▶ Generate soft float code, so that instead of generating floating point instructions,
calls to a user space library are generated
▶ Decision taken at toolchain configuration time
▶ Also possible to configure which floating point unit should be used
CPU optimization flags
▶ A set of cross-compiling tools is specific to a CPU architecture (ARM, x86, MIPS,

PowerPC)
▶ However, gcc offers further options:
▶ -march allows to select a specific target instruction set
▶ -mtune allows to optimize code for a specific CPU
▶ For example: -march=armv7 -mtune=cortex-a8
▶ -mcpu=cortex-a8 can be used instead to allow gcc to infer the target instruction set
(-march=armv7) and cpu optimizations (-mtune=cortex-a8)
▶ https://gcc.gnu.org/onlinedocs/gcc/ARM-Options.html
▶ At the toolchain compilation time, values can be chosen. They are used:
▶ As the default values for the cross-compiling tools, when no other -march, -mtune,
-mcpu options are passed
▶ To compile the C library
▶ Even if the C library has been compiled for armv5t, it doesn’t prevent from
compiling other programs for armv7
Obtaining a Toolchain
Building a toolchain manually
Building a cross-compiling toolchain by yourself is a difficult and painful task! Can

take days or weeks!
▶ Lots of details to learn: many components to build, complicated configuration
▶ Lots of decisions to make (such as C library version, ABI, floating point
mechanisms, component versions)
▶ Need kernel headers and C library sources
▶ Need to be familiar with current gcc issues and patches on your platform
▶ Useful to be familiar with building and configuring tools
▶ See the Crosstool-NG docs/ directory for details on how toolchains are built.
Get a pre-compiled toolchain
▶ Solution that many people choose

▶ Advantage: it is the simplest and most convenient solution
▶ Drawback: you can’t fine tune the toolchain to your needs
▶ Make sure the toolchain you find meets your requirements: CPU, endianness, C
library, component versions, ABI, soft float or hard float, etc.
▶ Possible choices
▶ Toolchains packaged by your distribution
Ubuntu example:
sudo apt install gcc-arm-linux-gnueabihf
▶ Bootlin’s toolchains (for most architectures): https://toolchains.bootlin.com
▶ Toolchain provided by your hardware vendor.
Toolchain building utilities
Another solution is to use utilities that automate the process of building the
toolchain
▶ Same advantage as the pre-compiled toolchains: you don’t need to mess up with
all the details of the build process
▶ But also offers more flexibility in terms of toolchain configuration, component
version selection, etc.
▶ They also usually contain several patches that fix known issues with the different
components on some architectures
▶ Multiple tools with identical principle: shell scripts or Makefile that automatically
fetch, extract, configure, compile and install the different components
Toolchain building utilities (2)
Crosstool-ng
▶ Rewrite of the older Crosstool, with a
menuconfig-like configuration system
▶ Feature-full: supports uClibc, glibc, musl,
bionic (Android’s C library), hard and soft
float, many architectures
▶ Actively maintained
▶ https://crosstool-ng.github.io/
Toolchain building utilities (3)
Many root filesystem build systems also allow the construction of a cross-compiling
toolchain
▶ Buildroot
▶ Makefile-based. Can build glibc, uClibc and musl based toolchains, for a wide range
of architectures.
▶ https://buildroot.org
▶ PTXdist
▶ Makefile-based, maintained mainly by Pengutronix. It only supports uClibc and glibc
(version 2020.05 status)
▶ https://www.ptxdist.org/
▶ OpenEmbedded / Yocto Project
▶ A featureful, but more complicated build system
▶ http://www.openembedded.org/
▶ https://www.yoctoproject.org/
Crosstool-NG: installation and usage
▶ Installation of Crosstool-NG can be done system-wide, or just locally in the source
directory. For local installation:
./configure --enable-local
make
make install
▶ Some sample configurations for various architectures are available in samples, they
can be listed using
./ct-ng list-samples
▶ To load a sample configuration
./ct-ng <sample-name>
▶ To adjust the configuration
./ct-ng menuconfig
▶ To build the toolchain
./ct-ng build
Toolchain contents
▶ The cross compilation tool binaries, in bin/

▶ This directory should be added to your PATH to ease usage of the toolchain
▶ One or several sysroot, each containing
▶ The C library and related libraries, compiled for the target
▶ The C library headers and kernel headers
▶ There is one sysroot for each variant: toolchains can be multilib if they have
several copies of the C library for different configurations (for example: ARMv4T,
ARMv5T, etc.)
▶ Old CodeSourcery ARM toolchains were multilib, the sysroots in:
arm-none-linux-gnueabi/libc/, arm-none-linux-gnueabi/libc/armv4t/,
arm-none-linux-gnueabi/libc/thumb2
▶ Crosstool-NG toolchains can be multilib too (still experimental), otherwise the
sysroot is in arm-unknown-linux-uclibcgnueabi/sysroot
Practical lab - Using Crosstool-NG
Time to build your toolchain

▶ Configure Crosstool-NG
▶ Run it to build your own cross-compiling
toolchain
Bootloaders
Bootloaders

Bootloaders
Boot Sequence
Bootloaders
▶ The bootloader is a piece of code responsible for

▶ Basic hardware initialization
▶ Loading of an application binary, usually an operating system kernel, from flash
storage, from the network, or from another type of non-volatile storage.
▶ Possibly decompression of the application binary
▶ Execution of the application
▶ Besides these basic functions, most bootloaders provide a shell with various
commands implementing different operations.
▶ Loading of data from storage or network, memory inspection, hardware diagnostics
and testing, etc.
Bootloaders on BIOS-based x86 (1)
▶ The x86 processors are typically bundled on a board with a

non-volatile memory containing a program, the BIOS.
▶ On old BIOS-based x86 platforms: the BIOS is responsible for
basic hardware initialization and loading of a very small piece of
code from non-volatile storage.
▶ This piece of code is typically a 1st stage bootloader, which will
load the full bootloader itself.
▶ It typically understands filesystem formats so that the kernel file
can be loaded directly from a normal filesystem.
▶ This sequence is different for modern EFI-based systems.
Bootloaders on x86 (2)
▶ GRUB, Grand Unified Bootloader, the most powerful one.

https://www.gnu.org/software/grub/
▶ Can read many filesystem formats to load the kernel image and the configuration,
provides a powerful shell with various commands, can load kernel images over the
network, etc.
▶ See our dedicated presentation for details:
https://bootlin.com/doc/legacy/grub/
▶ Syslinux, for network and removable media booting (USB key, CD-ROM)
https://kernel.org/pub/linux/utils/boot/syslinux/
Booting on embedded CPUs: case 1
▶ When powered, the CPU starts executing code at a fixed address

▶ There is no other booting mechanism provided by the CPU
▶ The hardware design must ensure that a NOR flash chip is wired
so that it is accessible at the address at which the CPU starts
executing instructions
▶ The first stage bootloader must be programmed at this address
in the NOR
▶ NOR is mandatory, because it allows random access, which
NAND doesn’t allow
▶ Not very common anymore (unpractical, and requires NOR
flash)
Booting on embedded CPUs: case 2
▶ The CPU has an integrated boot code in ROM

▶ BootROM on AT91 CPUs, “ROM code” on OMAP, etc.
▶ Exact details are CPU-dependent
▶ This boot code is able to load a first stage bootloader from a storage device into
an internal SRAM (DRAM not initialized yet)
▶ Storage device can typically be: MMC, NAND, SPI flash, UART (transmitting data
over the serial line), etc.
▶ The first stage bootloader is
▶ Limited in size due to hardware constraints (SRAM size)
▶ Provided either by the CPU vendor or through community projects
▶ This first stage bootloader must initialize DRAM and other hardware devices and
load a second stage bootloader into RAM
Booting on Microchip ARM SAMA5D3
▶ RomBoot: tries to find a valid bootstrap image from various

storage sources, and load it into SRAM (DRAM not initialized
yet). Size limited to 64 KB. No user interaction possible in
standard boot mode.
▶ AT91Bootstrap: runs from SRAM. Initializes the DRAM, the
NAND or SPI controller, and loads the secondary bootloader into
RAM and starts it. No user interaction possible.
▶ U-Boot: runs from RAM. Initializes some other hardware devices
(network, USB, etc.). Loads the kernel image from storage or
network to RAM and starts it. Shell with commands provided.
▶ Linux Kernel: runs from RAM. Takes over the system completely
(the bootloader no longer exists).
Note: same process on other Microchip AT91 SoCs, but the SRAM size
is smaller on the older ones.
Booting on ARM TI OMAP2+ / AM33xx
▶ ROM Code: tries to find a valid bootstrap image from various

storage sources, and load it into SRAM or RAM (RAM can be
initialized by ROM code through a configuration header). Size
limited to <64 KB. No user interaction possible.
▶ X-Loader or U-Boot SPL: runs from SRAM. Initializes the
DRAM, the NAND or MMC controller, and loads the secondary
bootloader into RAM and starts it. No user interaction possible.
File called MLO.
File called u-boot.bin or u-boot.img.
(bootloaders no longer exists).
Booting on Marvell SoCs
▶ ROM Code: tries to find a valid bootstrap image from various

storage sources, and load it into RAM. The RAM configuration is
described in a CPU-specific header, prepended to the bootloader
image.
File called u-boot.kwb.
(bootloaders no longer exists).
Generic bootloaders for embedded CPUs
▶ We will focus on the generic part, the main bootloader, offering the most
important features.
▶ There are several open-source generic bootloaders.
Here are the most popular ones:
▶ U-Boot, the universal bootloader by Denx
The most used on ARM, also used on PPC, MIPS, x86, m68k, RiscV, etc. The
de-facto standard nowadays. We will study it in detail.
https://www.denx.de/wiki/U-Boot
▶ Barebox, an architecture-neutral bootloader, written as a successor of U-Boot. It
doesn’t have as much hardware support as U-Boot yet. U-Boot has improved quite a
lot thanks to this competitor.
https://www.barebox.org
Bootloaders
The U-boot bootloader
U-Boot
U-Boot is a typical free software project

▶ License: GPLv2 (same as Linux)
▶ Freely available at https://www.denx.de/wiki/U-Boot
▶ Documentation available at https://www.denx.de/wiki/U-Boot/Documentation
▶ The latest development source code is available in a Git repository:
https://gitlab.denx.de/u-boot/u-boot
▶ Development and discussions happen around an open mailing-list
https://lists.denx.de/pipermail/u-boot/
▶ Follows a fixed-interval release schedule. Every two months, a new version is
released. Versions are named YYYY.MM.
U-Boot configuration
▶ Get the source code from the website, and uncompress it

▶ The configs/ directory contains one configuration file for each supported board
▶ It defines the CPU type, the peripherals and their configuration, the memory
mapping, the U-Boot features that should be compiled in, etc.
▶ Note: U-Boot is migrating from board configuration defined in C header files
(include/configs/) to defconfig like in the Linux kernel (configs/)
▶ Not all boards have been converted to the new configuration system.
▶ Older U-Boot releases provided by hardware vendors may not yet use this new
configuration system.
U-Boot configuration file
CHIP_defconfig
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
# CONFIG_MMC is not set
CONFIG_USB0_VBUS_PIN="PB10"
CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-r8-chip"
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_DFU=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_AXP_ALDO3_VOLT=3300
CONFIG_AXP_ALDO4_VOLT=3300
CONFIG_USB_MUSB_GADGET=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_G_DNL_MANUFACTURER="Allwinner Technology"
CONFIG_G_DNL_VENDOR_NUM=0x1f3a
CONFIG_G_DNL_PRODUCT_NUM=0x1010
CONFIG_USB_EHCI_HCD=y
Configuring and compiling U-Boot
▶ U-Boot must be configured before being compiled

▶ make BOARDNAME_defconfig
▶ Where BOARDNAME is the name of a configuration, as visible in the configs/
directory.
▶ You can then run make menuconfig to further customize U-Boot’s configuration!
▶ Make sure that the cross-compiler is available in PATH
▶ Compile U-Boot, by specifying the cross-compiler prefix.
Example, if your cross-compiler executable is arm-linux-gcc:
make CROSS_COMPILE=arm-linux-
▶ The main result is a u-boot.bin file, which is the U-Boot image. Depending on
your specific platform, there may be other specialized images: u-boot.img,
u-boot.kwb, MLO, etc.
Installing U-Boot
U-Boot must usually be installed in flash memory to be executed by the hardware.

Depending on the hardware, the installation of U-Boot is done in a different way:
▶ The CPU provides some kind of specific boot monitor with which you can
communicate through serial port or USB using a specific protocol
▶ The CPU boots first on removable media (MMC) before booting from fixed media
(NAND). In this case, boot from MMC to reflash a new version
▶ U-Boot is already installed, and can be used to flash a new version of U-Boot.
However, be careful: if the new version of U-Boot doesn’t work, the board is
unusable
▶ The board provides a JTAG interface, which allows to write to the flash memory
remotely, without any system running on the board. It also allows to rescue a
board if the bootloader doesn’t work.
U-boot prompt
▶ Connect the target to the host through a serial console.
▶ Power-up the board. On the serial console, you will see something like:
U-Boot 2020.04 (May 26 2020 - 16:05:43 +0200)
CPU: SAMA5D36
Crystal frequency: 12 MHz
CPU clock : 528 MHz
Master clock : 132 MHz
DRAM: 256 MiB
NAND: 256 MiB
MMC: Atmel mci: 0, Atmel mci: 1
Loading Environment from NAND... OK
In: serial@ffffee00
Out: serial@ffffee00
Err: serial@ffffee00
Net: eth0: ethernet@f0028000
Error: ethernet@f802c000 address not set.
Hit any key to stop autoboot: 0

=>
▶ The U-Boot shell offers a set of commands. We will study the most important
ones, see the documentation for a complete reference or the help command.
Information commands (1)
Flash information (NOR and SPI flash)

=> flinfo
DataFlash:AT45DB021
Nb pages: 1024
Page Size: 264
Size= 270336 bytes
Logical address: 0xC0000000
Area 0: C0000000 to C0001FFF (RO) Bootstrap
Area 1: C0002000 to C0003FFF Environment
Area 2: C0004000 to C0041FFF (RO) U-Boot
NAND flash information

=> nand info
Device 0: nand0, sector size 128 KiB

Page size 2048 b
OOB size 64 b
Erase size 131072 b
subpagesize 2048 b
options 0x40004200
bbt options 0x00008000
Information commands (2)
Version details
=> version
U-Boot 2020.04 (May 26 2020 - 16:05:43 +0200)
arm-linux-gcc (crosstool-NG 1.24.0.105_5659366) 9.2.0

GNU ld (crosstool-NG 1.24.0.105_5659366) 2.34
Important commands (1)
▶ The exact set of commands depends on the U-Boot configuration

▶ help and help command
▶ fatload, loads a file from a FAT filesystem to RAM
▶ Example: fatload usb 0:1 0x21000000 zImage
▶ And also fatls and fatinfo
▶ ext2load, loads a file from an ext2 filesystem to RAM
▶ And also ext2ls to list files, ext2info for information
▶ tftp, loads a file from the network to RAM
▶ ping, to test the network
▶ boot, runs the default boot command, stored in bootcmd
▶ bootz <address>, starts a kernel image loaded at the given address in RAM
Important commands (2)
▶ loadb, loads, loady, load a file from the serial line to RAM
▶ usb, to initialize and control the USB subsystem, mainly used for USB storage
devices such as USB keys
▶ mmc, to initialize and control the MMC subsystem, used for SD and microSD cards
▶ nand, to erase, read and write contents to NAND flash
▶ erase, protect, cp, to erase, modify protection and write to NOR flash
▶ md, displays memory contents. Can be useful to check the contents loaded in
memory, or to look at hardware registers.
▶ mm, modifies memory contents. Can be useful to modify directly hardware
registers, for testing purposes.
Environment variables: principle
▶ U-Boot can be configured through environment variables

▶ Some specific environment variables affect the behavior of the different commands
▶ Custom environment variables can be added, and used in scripts
▶ Environment variables are loaded from flash to RAM at U-Boot startup, can be
modified and saved back to flash for persistence
▶ There is a dedicated location in flash (or in MMC storage) to store the U-Boot
environment, defined in the board configuration file
Environment variables commands (2)
Commands to manipulate environment variables:

▶ printenv
Shows all variables
▶ printenv <variable-name>
Shows the value of a variable
▶ setenv <variable-name> <variable-value>
Changes the value of a variable, only in RAM
▶ editenv <variable-name>
Edits the value of a variable, only in RAM
▶ saveenv
Saves the current state of the environment to flash
Environment variables commands - Example
u-boot # printenv
baudrate=19200
ethaddr=00:40:95:36:35:33
netmask=255.255.255.0
ipaddr=10.0.0.11
serverip=10.0.0.1
stdin=serial
stdout=serial
stderr=serial
u-boot # printenv serverip
serverip=10.0.0.1
u-boot # setenv serverip 10.0.0.100
u-boot # saveenv
Important U-Boot env variables
▶ bootcmd, specifies the commands that U-Boot will automatically execute at boot
time after a configurable delay (bootdelay), if the process is not interrupted
▶ bootargs, contains the arguments passed to the Linux kernel, covered later
▶ serverip, the IP address of the server that U-Boot will contact for network
related commands
▶ ipaddr, the IP address that U-Boot will use
▶ netmask, the network mask to contact the server
▶ ethaddr, the MAC address, can only be set once
▶ autostart, if set to yes, U-Boot automatically starts an image after loading it in
memory (tftp, fatload...)
▶ filesize, the size of the latest copy to memory (from tftp, fatload,
nand read...)
Scripts in environment variables
▶ Environment variables can contain small scripts, to execute several commands and
test the results of commands.
▶ Useful to automate booting or upgrade processes
▶ Several commands can be chained using the ; operator
▶ Tests can be done using if command ; then ... ; else ... ; fi
▶ Scripts are executed using run <variable-name>
▶ You can reference other variables using ${variable-name}
▶ Example
▶ setenv mmc-boot 'if fatload mmc 0 80000000 boot.ini; then source; else
if fatload mmc 0 80000000 zImage; then run mmc-do-boot; fi; fi'
Transferring files to the target
▶ U-Boot is mostly used to load and boot a kernel image, but it also allows to
change the kernel image and the root filesystem stored in flash.
▶ Files must be exchanged between the target and the development workstation.
This is possible:
▶ Through the network if the target has an Ethernet connection, and U-Boot contains
a driver for the Ethernet chip. This is the fastest and most efficient solution.
▶ Through a USB key, if U-Boot supports the USB controller of your platform
▶ Through a SD or microSD card, if U-Boot supports the MMC controller of your
platform
▶ Through the serial port (loadb, loadx or loady command)
TFTP
▶ Network transfer from the development workstation to U-Boot on the target takes
place through TFTP
▶ Trivial File Transfer Protocol
▶ Somewhat similar to FTP, but without authentication and over UDP
▶ A TFTP server is needed on the development workstation
▶ sudo apt install tftpd-hpa
▶ All files in /var/lib/tftpboot (in Ubuntu 18.04) or in /srv/tftp (in Ubuntu
20.04) are then visible through TFTP
▶ A TFTP client is available in the tftp-hpa package, for testing
▶ A TFTP client is integrated into U-Boot
▶ Configure the ipaddr and serverip environment variables
▶ Use tftp <address> <filename> to load a file
Practical lab - U-Boot
Time to start the practical lab!

▶ Communicate with the board using a serial
console
▶ Configure, build and install the first stage
bootloader
▶ Configure, build and install U-Boot
▶ Learn U-Boot commands
▶ Set up TFTP communication with the board
Linux kernel introduction
Linux kernel
introduction

Linux features
History
▶ The Linux kernel is one component of a system, which also

requires libraries and applications to provide features to end
users.
▶ The Linux kernel was created as a hobby in 1991 by a Finnish
student, Linus Torvalds.
▶ Linux quickly started to be used as the kernel for free software
operating systems
▶ Linus Torvalds has been able to create a large and dynamic
developer and user community around Linux. Linus Torvalds in 2014
▶ Nowadays, more than one thousand people contribute to each Image credits (Wikipedia):
https://bit.ly/2UIa1TD
kernel release, individuals or companies big and small.
Linux kernel key features
▶ Portability and hardware support. ▶ Security. It can’t hide its flaws. Its
Runs on most architectures. code is reviewed by many experts.
▶ Scalability. Can run on super ▶ Stability and reliability.
computers as well as on tiny devices ▶ Modularity. Can include only what a
(4 MB of RAM is enough). system needs even at run time.
▶ Compliance to standards and ▶ Easy to program. You can learn from
interoperability. existing code. Many useful resources
▶ Exhaustive networking support. on the net.
Linux kernel in the system
Linux kernel main roles
▶ Manage all the hardware resources: CPU, memory, I/O.

▶ Provide a set of portable, architecture and hardware independent APIs to
allow user space applications and libraries to use the hardware resources.
▶ Handle concurrent accesses and usage of hardware resources from different
applications.
▶ Example: a single network interface is used by multiple user space applications
through various network connections. The kernel is responsible to “multiplex” the
hardware resource.
System calls
▶ The main interface between the kernel and user space is

the set of system calls
▶ About 400 system calls that provide the main kernel
services
▶ File and device operations, networking operations,
inter-process communication, process management,
memory mapping, timers, threads, synchronization
primitives, etc.
▶ This interface is stable over time: only new system calls
can be added by the kernel developers
▶ This system call interface is wrapped by the C library,
Image credits (Wikipedia):
and user space applications usually never make a system https://bit.ly/2U2rdGB
call directly but rather use the corresponding C library
function
Pseudo filesystems
▶ Linux makes system and kernel information available in user space through
pseudo filesystems, sometimes also called virtual filesystems
▶ Pseudo filesystems allow applications to see directories and files that do not exist
on any real storage: they are created and updated on the fly by the kernel
▶ The two most important pseudo filesystems are
▶ proc, usually mounted on /proc:
Operating system related information (processes, memory management
parameters...)
▶ sysfs, usually mounted on /sys:
Representation of the system as a set of devices and buses. Information about these
devices.
Inside the Linux kernel
Linux license
▶ The whole Linux sources are Free Software released under the GNU General
Public License version 2 (GPL v2).
▶ For the Linux kernel, this basically implies that:
▶ When you receive or buy a device with Linux on it, you should receive the Linux
sources, with the right to study, modify and redistribute them.
▶ When you produce Linux based devices, you must release the sources to the
recipient, with the same rights, with no restriction.
Supported hardware architectures
See the arch/ directory in the kernel sources

▶ Minimum: 32 bit processors, with or without MMU, and gcc support
▶ 32 bit architectures (arch/ subdirectories)
Examples: arm, arc, c6x, m68k, microblaze...
▶ 64 bit architectures:
Examples: alpha, arm64, ia64...
▶ 32/64 bit architectures
Examples: mips, powerpc, riscv, sh, sparc, x86...
▶ Note that unmaintained architectures can also be removed when they have
compiling issues and nobody fixes them.
▶ Find details in kernel sources: arch/<arch>/Kconfig, arch/<arch>/README, or
Documentation/<arch>/
Linux versioning scheme and development

process
Linux versioning scheme
▶ Until 2003, there was a new stable release branch of Linux every 2 or 3 years (2.0,
2.2, 2.4). New development branches took 2-3 years to become stable (too slow!).
▶ Since 2003, there is a new stable release of Linux about every 10 weeks:
▶ Versions 2.6 (Dec. 2003) to 2.6.39 (May 2011)
▶ Versions 3.0 (Jul. 2011) to 3.19 (Feb. 2015)
▶ Versions 4.0 (Apr. 2015) to 4.20 (Dec. 2018)
▶ Version 5.0 was released in Mar. 2019.
▶ Features are added to the kernel in a progressive way. Since 2003, kernel
developers have managed to do so without having to introduce a massively
incompatible development branch.
▶ For each release, there are bugfix and security updates: 5.0.1, 5.0.2, etc.
Linux development model
Using merge and bug fixing windows
Need for long term support (1)
▶ Issue: bug and security fixes only released for most recent stable kernel versions.
Only LTS (Long Term Support) releases are supported for up to 6 years.
▶ Example at Google: starting from Android O (2017), all new Android devices will
have to run such an LTS kernel.
Captured on https://kernel.org in Nov.

2019, following the Releases link.
Need for long term support (2)
▶ You could also get long term support from a commercial embedded Linux provider.
▶ ”If you are not using a supported distribution kernel, or a stable / longterm kernel,
you have an insecure kernel” - Greg KH, 2019
Some vulnerabilities are fixed in stable without ever getting a CVE.
▶ The Civil Infrastructure Platform project is an industry / Linux Foundation effort
to support selected LTS versions (starting with 4.4) much longer (> 10 years).
See https://bit.ly/2hy1QYC.
What’s new in each Linux release? (1)
The official list of changes for each Linux release is just a huge list of individual
patches!
commit aa6e52a35d388e730f4df0ec2ec48294590cc459
Author: Thomas Petazzoni <[email protected]>
Date: Wed Jul 13 11:29:17 2011 +0200
at91: at91-ohci: support overcurrent notification
Several USB power switches (AIC1526 or MIC2026) have a digital output

that is used to notify that an overcurrent situation is taking
place. This digital outputs are typically connected to GPIO inputs of
the processor and can be used to be notified of these overcurrent
situations.
Therefore, we add a new overcurrent_pin[] array in the at91_usbh_data

structure so that boards can tell the AT91 OHCI driver which pins are
used for the overcurrent notification, and an overcurrent_supported
boolean to tell the driver whether overcurrent is supported or not.
The code has been largely borrowed from ohci-da8xx.c and

ohci-s3c2410.c.
Signed-off-by: Thomas Petazzoni <[email protected]>

Signed-off-by: Nicolas Ferre <[email protected]>
Very difficult to find out the key changes and to get the global picture out of individual
changes.
What’s new in each Linux release? (2)
Fortunately, there are some useful resources available

▶ https://kernelnewbies.org/LinuxChanges
In depth coverage of the new features in each kernel release
▶ https://lwn.net
Coverage of the features accepted in each merge window
▶ https://www.linux-arm.info
News about Linux on ARM, including kernel changes.
▶ https://linuxfr.org, for French readers. There is also a long summary of new
features (different from the content on LinuxChanges).
Linux kernel sources
Location of kernel sources
▶ The official (mainline) versions of the Linux kernel, as released by Linus Torvalds,
are available at https://kernel.org
▶ These versions follow the development model of the kernel
▶ However, they may not contain the latest development from a specific area yet.
Some features in development might not be ready for mainline inclusion yet.
▶ Many chip vendors supply their own kernel sources
▶ Focusing on hardware support first
▶ Can have a very important delta with mainline Linux
▶ Useful only when mainline hasn’t caught up yet.
▶ Many kernel sub-communities maintain their own kernel, with usually newer but
less stable features
▶ Architecture communities (ARM, MIPS, PowerPC, etc.), device drivers communities
(I2C, SPI, USB, PCI, network, etc.), other communities (real-time, etc.)
▶ No official releases, only meant for sharing work and contributing to the mainline
version.
Getting Linux sources
▶ The kernel sources are available from https://kernel.org/pub/linux/kernel

as full tarballs (complete kernel sources) and patches (differences between two
kernel versions).
▶ However, more and more people use the git version control system. Absolutely
needed for kernel development!
▶ Fetch the entire kernel sources and history
git clone git:
//git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
▶ Create a branch that starts at a specific stable version
git checkout -b <name-of-branch> v5.6
▶ Web interface available at
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/
▶ Read more about Git at https://git-scm.com/
Working with git: SSD storage needed for serious work
For all work with git, but especially on big projects

such as the Linux kernel...
▶ Having a fast disk will dramatically speed up
most git operations.
▶ Ask your boss to order an SSD disk for your
laptop. It will make you more productive.
▶ If you are in a Bootlin public session, you
already have an SSD disk!
Linux kernel size (1)
▶ Linux 5.4 sources:

▶ 66031 files (git ls-files | wc -l)
▶ 27679764 lines (git ls-files | xargs cat | wc -l)
▶ 889221135 bytes (git ls-files | xargs cat | wc -c)
▶ A minimum uncompressed Linux kernel just sizes 1-2 MB
▶ Why are these sources so big?
Because they include thousands of device drivers, many network protocols,
support many architectures and filesystems...
▶ The Linux core (scheduler, memory management...) is pretty small!
Linux kernel size (2)
As of kernel version 5.7 (in percentage of total number of lines).
▶ drivers/: 60.1% ▶ lib/: 0.6%

▶ arch/: 12.9% ▶ mm/: 0.5%
▶ fs/: 4.7% ▶ scripts/: 0.4%
▶ sound/: 4.2% ▶ crypto/: 0.4%
▶ net/: 4.0% ▶ security/: 0.3%
▶ include/: 3.6% ▶ block/: 0.2%
▶ tools/: 3.2% ▶ samples/: 0.1%
▶ Documentation/: 3.2% ▶ virt/: 0.1%
▶ kernel/: 1.3% ▶ ...
Getting Linux sources
▶ Full tarballs
▶ Contain the complete kernel sources: long to download and uncompress, but must
be done at least once
▶ Example:
https://kernel.org/pub/linux/kernel/v4.x/linux-4.20.13.tar.xz
▶ Extract command:
tar xf linux-4.20.13.tar.xz
▶ Incremental patches between versions
▶ It assumes you already have a base version and you apply the correct patches in the
right order. Quick to download and apply
▶ Examples:
https://kernel.org/pub/linux/kernel/v4.x/patch-4.20.xz
(4.19 to 4.20)
https://kernel.org/pub/linux/kernel/v4.x/patch-4.20.13.xz
(4.20 to 4.20.13)
▶ All previous kernel versions are available in
https://kernel.org/pub/linux/kernel/
Patch
▶ A patch is the difference between two source trees
▶ Computed with the diff tool, or with more elaborate version control systems
▶ They are very common in the open-source community.
See https://en.wikipedia.org/wiki/Diff
▶ Excerpt from a patch:
diff -Nru a/Makefile b/Makefile
--- a/Makefile 2005-03-04 09:27:15 -08:00
+++ b/Makefile 2005-03-04 09:27:15 -08:00
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 11
-EXTRAVERSION =
+EXTRAVERSION = .1
NAME=Woozy Numbat
# *DOCUMENTATION*
Contents of a patch
▶ One section per modified file, starting with a header
diff -Nru a/Makefile b/Makefile
--- a/Makefile 2005-03-04 09:27:15 -08:00
+++ b/Makefile 2005-03-04 09:27:15 -08:00
▶ One sub-section (hunk) per modified part of the file, starting with a header with the
starting line number and the number of lines the change hunk applies to
@@ -1,7 +1,7 @@
▶ Three lines of context before the change
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 11
▶ The change itself
-EXTRAVERSION =
+EXTRAVERSION = .1
▶ Three lines of context after the change
NAME=Woozy Numbat
Using the patch command
The patch command:

▶ Takes the patch contents on its standard input
▶ Applies the modifications described by the patch into the current directory
patch usage examples:
▶ patch -p<n> < diff_file
▶ cat diff_file | patch -p<n>
▶ xzcat diff_file.xz | patch -p<n>
▶ zcat diff_file.gz | patch -p<n>
▶ Notes:
▶ n: number of directory levels to skip in the file paths
▶ You can reverse apply a patch with the -R option
▶ You can test a patch with --dry-run option
Applying a Linux patch
▶ Two types of Linux patches:
▶ Either to be applied to the previous stable version
(from x.<y-1> to x.y)
▶ Or implementing fixes to the current stable version
(from x.y to x.y.z)
▶ Can be downloaded in gzip or xz (much smaller) compressed files.
▶ Always produced for n=1
(that’s what everybody does... do it too!)
▶ Need to run the patch command inside the toplevel kernel source directory
▶ Linux patch command line example:
cd linux-4.19
xzcat ../patch-4.20.xz | patch -p1
xzcat ../patch-4.20.13.xz | patch -p1
cd ..; mv linux-4.19 linux-4.20.13
Practical lab - Kernel sources
Time to start the practical lab!

▶ Get the Linux kernel sources
▶ Apply patches
Building the kernel
Kernel configuration
Kernel configuration
▶ The kernel contains thousands of device drivers, filesystem drivers, network

protocols and other configurable items
▶ Thousands of options are available, that are used to selectively compile parts of
the kernel source code
▶ The kernel configuration is the process of defining the set of options with which
you want your kernel to be compiled
▶ The set of options depends
▶ On the target architecture and on your hardware (for device drivers, etc.)
▶ On the capabilities you would like to give to your kernel (network capabilities,
filesystems, real-time, etc.). Such generic options are available in all architectures.
Specifying the target architecture
First, specify the architecture for the kernel to build

▶ Set it to the name of a directory under arch/:
export ARCH=arm
▶ By default, the kernel build system assumes that the kernel is configured and built
for the host architecture (x86 in our case, native kernel compiling)
▶ The kernel build system will use this setting to:
▶ Use the configuration options for the target architecture.
▶ Compile the kernel with source code and headers for the target architecture.
Kernel configuration and build system
▶ The kernel configuration and build system is based on multiple Makefiles

▶ One only interacts with the main Makefile, present at the top directory of the
kernel source tree
▶ Interaction takes place
▶ using the make tool, which parses the Makefile
▶ through various targets, defining which action should be done (configuration,
compilation, installation, etc.). Run make help to see all available targets.
▶ Example
▶ cd linux-4.14.x/
▶ make <target>
Kernel configuration details
▶ The configuration is stored in the .config file at the root of kernel sources
▶ Simple text file, CONFIG_PARAM=value (included by the kernel Makefile)
▶ As options have dependencies, typically never edited by hand, but through
graphical or text interfaces:
▶ make xconfig, make gconfig (graphical)
▶ make menuconfig, make nconfig (text)
▶ You can switch from one to another, they all load/save the same .config file, and
show the same set of options
Initial configuration
Difficult to find which kernel configuration will work with your hardware and root
filesystem. Start with one that works!
▶ Desktop or server case:
▶ Advisable to start with the configuration of your running kernel, usually available in
/boot:
cp /boot/config-ùname -r` .config
▶ Embedded platform case:
▶ Default configuration files are available, usually for each CPU family.
▶ They are stored in arch/<arch>/configs/, and are just minimal .config files (only
settings different from default ones).
▶ Run make help to find if one is available for your platform
▶ To load a default configuration file, just run
make cpu_defconfig
▶ This will overwrite your existing .config file!
Now, you can make configuration changes (make menuconfig...).
Create your own default configuration
To create your own default configuration file:

▶ make savedefconfig
This creates a minimal configuration (non-default settings)
▶ mv defconfig arch/<arch>/configs/myown_defconfig
This way, you can share a reference configuration inside the kernel sources.
Kernel or module?
▶ The kernel image is a single file, resulting from the linking of all object files that
correspond to features enabled in the configuration
▶ This is the file that gets loaded in memory by the bootloader
▶ All included features are therefore available as soon as the kernel starts, at a time
where no filesystem exists
▶ Some features (device drivers, filesystems, etc.) can however be compiled as
modules
▶ These are plugins that can be loaded/unloaded dynamically to add/remove features
to the kernel
▶ Each module is stored as a separate file in the filesystem, and therefore access
to a filesystem is mandatory to use modules
▶ This is not possible in the early boot procedure of the kernel, because no filesystem
is available
Kernel option types
There are different types of options, defined in Kconfig files:

▶ bool options, they are either
▶ true (to include the feature in the kernel) or
▶ false (to exclude the feature from the kernel)
▶ tristate options, they are either
▶ true (to include the feature in the kernel image) or
▶ module (to include the feature as a kernel module) or
▶ false (to exclude the feature)
▶ int options, to specify integer values
▶ hex options, to specify hexadecimal values
▶ string options, to specify string values
Kernel option dependencies
There are dependencies between kernel options
▶ For example, enabling a network driver requires the network stack to be enabled
▶ Two types of dependencies:
▶ depends on dependencies. In this case,
option B that depends on option A is not
visible until option A is enabled
▶ select dependencies. In this case, with
option B depending on option A, when
option A is enabled, option B is
automatically enabled. In particular, such
dependencies are used to declare what
features a hardware architecture supports.
▶ With the Show All Options option, make xconfig allows to see all options, even
the ones that cannot be selected because of missing dependencies. Values for
dependencies are shown.
make xconfig
make xconfig
▶ The most common graphical interface to configure the kernel.
▶ File browser: easier to load configuration files
▶ Search interface to look for parameters
▶ Required Debian / Ubuntu packages: qt5-default
make xconfig screenshot
make xconfig search interface
Looks for a keyword in the parameter name (shortcut: [Ctrl] + [f]).
Allows to set values to found parameters.
Kernel configuration options
Compiled as a module (separate file)

CONFIG_ISO9660_FS=m
Driver options
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
Compiled statically into the kernel

CONFIG_UDF_FS=y
Values in resulting .config file Parameter values as displayed in make xconfig
Corresponding .config file excerpt
Options are grouped by sections and are prefixed with CONFIG_.
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
make gconfig
make gconfig
▶ GTK based graphical configuration
interface. Functionality similar to that
of make xconfig.
▶ Just lacking a search functionality.
▶ Required Debian packages:
libglade2-dev
make menuconfig
make menuconfig
▶ Useful when no graphics are available.
Pretty convenient too!
▶ Same interface found in other tools:
BusyBox, Buildroot...
libncurses-dev
make nconfig
make nconfig
▶ A newer, similar text interface
▶ More user friendly (for example, easier
to access help information).
▶ However, lacking the shortcuts that
menuconfig offers in search results.
Therefore, much less convenient than
menuconfig.
libncurses-dev
make oldconfig
make oldconfig
▶ Needed very often!
▶ Useful to upgrade a .config file from an earlier kernel release
▶ Asks for values for new parameters.
▶ ... unlike make menuconfig and make xconfig which silently set default values
for new parameters.
If you edit a .config file by hand, it’s useful to run make oldconfig afterwards, to set
values to new parameters that could have appeared because of dependency changes.
Undoing configuration changes
A frequent problem:
▶ After changing several kernel configuration settings, your kernel no longer works.
▶ If you don’t remember all the changes you made, you can get back to your
previous configuration:
$ cp .config.old .config
▶ All the configuration interfaces of the kernel (xconfig, menuconfig,
oldconfig...) keep this .config.old backup copy.
Compiling and installing the kernel
Choose a compiler
The compiler invoked by the kernel Makefile is $(CROSS_COMPILE)gcc

▶ When compiling natively
▶ Leave CROSS_COMPILE undefined and the kernel will be natively compiled for the host
architecture using gcc.
▶ When using a cross-compiler
▶ To make the difference with a native compiler, cross-compiler executables are
prefixed by the name of the target system, architecture and sometimes library.
Examples:
mips-linux-gcc: the prefix is mips-linux-
arm-linux-gnueabi-gcc: the prefix is arm-linux-gnueabi-
▶ So, you can specify your cross-compiler as follows:
export CROSS_COMPILE=arm-linux-gnueabi-
CROSS_COMPILE is actually the prefix of the cross compiling tools (gcc, as, ld,
objcopy, strip...).
Specifying ARCH and CROSS_COMPILE
There are actually two ways of defining ARCH and CROSS_COMPILE:

▶ Pass ARCH and CROSS_COMPILE on the make command line:
make ARCH=arm CROSS_COMPILE=arm-linux- ...
Drawback: it is easy to forget to pass these variables when you run any make
command, causing your build and configuration to be screwed up.
▶ Define ARCH and CROSS_COMPILE as environment variables:
export ARCH=arm
export CROSS_COMPILE=arm-linux-
Drawback: it only works inside the current shell or terminal. You could put these
settings in a file that you source every time you start working on the project. If
you only work on a single architecture with always the same toolchain, you could
even put these settings in your ~/.bashrc file to make them permanent and
visible from any terminal.
Kernel compilation
▶ make
▶ In the main kernel source directory!
▶ Remember to run multiple jobs in parallel if you have multiple CPU cores. Example:
make -j 8
▶ No need to run as root!
▶ Generates
▶ vmlinux, the raw uncompressed kernel image, in the ELF format, useful for
debugging purposes, but cannot be booted
▶ arch/<arch>/boot/*Image, the final, usually compressed, kernel image that can be
booted
▶ bzImage for x86, zImage for ARM, vmlinux.bin.gz for ARC, etc.
▶ arch/<arch>/boot/dts/*.dtb, compiled Device Tree files (on some architectures)
▶ All kernel modules, spread over the kernel source tree, as .ko (Kernel Object) files.
Kernel installation: native case
▶ make install
▶ Does the installation for the host system by default, so needs to be run as root.
▶ Installs
▶ /boot/vmlinuz-<version>
Compressed kernel image. Same as the one in arch/<arch>/boot
▶ /boot/System.map-<version>
Stores kernel symbol addresses for debugging purposes (obsolete: such information is
usually stored in the kernel itself)
▶ /boot/config-<version>
Kernel configuration for this version
▶ In GNU/Linux distributions, typically re-runs the bootloader configuration utility
to make the new kernel available at the next boot.
Kernel installation: embedded case
▶ make install is rarely used in embedded development, as the kernel image is a

single file, easy to handle.
▶ Another reason is that there is no standard way to deploy and use the kernel
image.
▶ Therefore making the kernel image available to the target is usually manual or
done through scripts in build systems.
▶ It is however possible to customize the make install behavior in
arch/<arch>/boot/install.sh
Module installation: native case
▶ make modules_install
▶ Does the installation for the host system by default, so needs to be run as root
▶ Installs all modules in /lib/modules/<version>/
▶ kernel/
Module .ko (Kernel Object) files, in the same directory structure as in the sources.
▶ modules.alias, modules.aliases.bin
Aliases for module loading utilities. Used to find drivers for devices. Example line:
alias usb:v066Bp20F9d*dc*dsc*dp*ic*isc*ip*in* asix
▶ modules.dep, modules.dep.bin
Module dependencies
▶ modules.symbols, modules.symbols.bin
Tells which module a given symbol belongs to.
Module installation: embedded case
▶ In embedded development, you can’t directly use make modules_install as it

would install target modules in /lib/modules on the host!
▶ The INSTALL_MOD_PATH variable is needed to generate the module related files
and install the modules in the target root filesystem instead of your host root
filesystem:
make INSTALL_MOD_PATH=<dir>/ modules_install
Kernel cleanup targets
▶ Clean-up generated files (to force re-compilation):

make clean
▶ Remove all generated files. Needed when switching from one
architecture to another. Caution: it also removes your .config
file!
make mrproper
▶ Also remove editor backup and patch reject files (mainly to
generate patches):
make distclean
▶ If you are in a git tree, remove all files not tracked (and ignored)
by git:
git clean -fdx
Kernel building overview
Booting the kernel
Device Tree (DT)
▶ Many embedded architectures have a lot of non-discoverable hardware.

▶ Depending on the architecture, such hardware is either described in BIOS ACPI
tables (x86), using C code directly within the kernel, or using a special hardware
description language in a Device Tree.
▶ The DT was created for PowerPC, and later was adopted by other architectures
(ARM, ARC...). Now Linux has DT support in most architectures, at least for
specific systems (for example for the OLPC on x86).
▶ A Device Tree Source, written by kernel developers, is compiled into a binary
Device Tree Blob, and needs to be passed to the kernel at boot time.
▶ There is one different Device Tree for each board/platform supported by the kernel,
available in arch/arm/boot/dts/<board>.dtb.
▶ The bootloader must load both the kernel image and the Device Tree Blob in
memory before starting the kernel.
Customize your board device tree!
Often needed for embedded board users:

▶ To describe external devices attached to
non-discoverable busses (such as I2C) and configure
them.
▶ To configure pin muxing: choosing what SoC
signals are made available on the board external
connectors.
▶ To configure some system parameters: flash
partitions, kernel command line (other ways exist)
▶ Useful reference: Device Tree for Dummies,
Thomas Petazzoni (Apr. 2014):
https://j.mp/1jQU6NR
Booting with U-Boot
▶ Recent versions of U-Boot can boot the zImage binary.

▶ Older versions require a special kernel image format: uImage
▶ uImage is generated from zImage using the mkimage tool. It is done automatically
by the kernel make uImage target.
▶ On some ARM platforms, make uImage requires passing a LOADADDR environment
variable, which indicates at which physical memory address the kernel will be
executed.
▶ In addition to the kernel image, U-Boot can also pass a Device Tree Blob to the
kernel.
▶ The typical boot process is therefore:
1. Load zImage or uImage at address X in memory
2. Load <board>.dtb at address Y in memory
3. Start the kernel with bootz X - Y (zImage case), or bootm X - Y (uImage case)
The - in the middle indicates no initramfs
Kernel command line
▶ In addition to the compile time configuration, the kernel behavior can be adjusted
with no recompilation using the kernel command line
▶ The kernel command line is a string that defines various arguments to the kernel
▶ It is very important for system configuration
▶ root= for the root filesystem (covered later)
▶ console= for the destination of kernel messages
▶ Many more exist. The most important ones are documented in
admin-guide/kernel-parameters in kernel documentation.
▶ This kernel command line can be, in order of priority (highest to lowest):
▶ Passed by the bootloader. In U-Boot, the contents of the bootargs environment
variable is automatically passed to the kernel.
▶ Specified in the Device Tree (for architectures which use it)
▶ Built into the kernel, using the CONFIG_CMDLINE option.
Practical lab - Kernel cross-compiling
▶ Set up the cross-compiling environment

▶ Configure and cross-compile the kernel for an
arm platform
▶ On this platform, interact with the bootloader
and boot your kernel
Using kernel modules
Advantages of modules
▶ Modules make it easy to develop drivers without rebooting: load, test, unload,
rebuild, load...
▶ Useful to keep the kernel image size to the minimum (essential in GNU/Linux
distributions for PCs).
▶ Also useful to reduce boot time: you don’t spend time initializing devices and
kernel features that you only need later.
▶ Caution: once loaded, have full control and privileges in the system. No particular
protection. That’s why only the root user can load and unload modules.
▶ To increase security, possibility to allow only signed modules, or to disable module
support entirely.
Module dependencies
▶ Some kernel modules can depend on other modules, which need to be loaded first.
▶ Example: the ubifs module depends on the ubi and mtd modules.
▶ Dependencies are described both in
/lib/modules/<kernel-version>/modules.dep and in
/lib/modules/<kernel-version>/modules.dep.bin (binary hashed format)
These files are generated when you run make modules_install.
Kernel log
When a new module is loaded, related information is available in the kernel log.
▶ The kernel keeps its messages in a circular buffer (so that it doesn’t consume
more memory with many messages)
▶ Kernel log messages are available through the dmesg command (diagnostic
message)
▶ Kernel log messages are also displayed in the system console (console messages
can be filtered by level using the loglevel kernel command line parameter, or
completely disabled with the quiet parameter). Example:
console=ttyS0 root=/dev/mmcblk0p2 loglevel=5
▶ Note that you can write to the kernel log from user space too:
echo "<n>Debug info" > /dev/kmsg
Module utilities (1)
<module_name>: name of the module file without the trailing .ko

▶ modinfo <module_name> (for modules in /lib/modules)
modinfo <module_path>.ko
Gets information about a module without loading it: parameters, license,
description and dependencies.
▶ sudo insmod <module_path>.ko
Tries to load the given module. The full path to the module object file must be
given.
Understanding module loading issues
▶ When loading a module fails, insmod often doesn’t give you enough details!
▶ Details are often available in the kernel log.
▶ Example:
$ sudo insmod ./intr_monitor.ko
insmod: error inserting './intr_monitor.ko': -1 Device or resource busy
$ dmesg
[17549774.552000] Failed to register handler for irq channel 2
▶ sudo modprobe <module_name>

Most common usage of modprobe: tries to load all the modules the given module
depends on, and then this module. Lots of other options are available. modprobe
automatically looks in /lib/modules/<version>/ for the object file
corresponding to the given module name.
▶ lsmod
Displays the list of loaded modules
Compare its output with the contents of /proc/modules!
▶ sudo rmmod <module_name>

Tries to remove the given module.
Will only be allowed if the module is no longer in use (for example, no more
processes opening a device file)
▶ sudo modprobe -r <module_name>
Tries to remove the given module and all dependent modules (which are no longer
needed after removing the module)
Passing parameters to modules
▶ Find available parameters:

modinfo usb-storage
▶ Through insmod:
sudo insmod ./usb-storage.ko delay_use=0
▶ Through modprobe:
Set parameters in /etc/modprobe.conf or in any file in /etc/modprobe.d/:
options usb-storage delay_use=0
▶ Through the kernel command line, when the driver is built statically into the
kernel:
usb-storage.delay_use=0
▶ usb-storage is the driver name
▶ delay_use is the driver parameter name. It specifies a delay before accessing a USB
storage device (useful for rotating devices).
▶ 0 is the driver parameter value
Check module parameter values
How to find/edit the current values for the parameters of a loaded module?
▶ Check /sys/module/<name>/parameters.
▶ There is one file per parameter, containing the parameter value.
▶ Also possible to change parameter values if these files have write permissions
(depends on the module code).
▶ Example:
echo 0 > /sys/module/usb_storage/parameters/delay_use
Useful reading
Linux Kernel in a Nutshell, Dec. 2006

▶ By Greg Kroah-Hartman, O’Reilly
http://www.kroah.com/lkn/
▶ A good reference book and guide on configuring,
compiling and managing the Linux kernel sources.
▶ Freely available on-line!
Great companion to the printed book for easy electronic
searches!
Available as single PDF file on
https://bootlin.com/community/kernel/lkn/
▶ Getting old but still containing useful content.
Linux Root Filesystem

Principle and solutions
Filesystems
▶ Filesystems are used to organize data in directories and files on storage devices or
on the network. The directories and files are organized as a hierarchy
▶ In UNIX systems, applications and users see a single global hierarchy of files and
directories, which can be composed of several filesystems.
▶ Filesystems are mounted in a specific location in this hierarchy of directories
▶ When a filesystem is mounted in a directory (called mount point), the contents of
this directory reflects the contents of the storage device
▶ When the filesystem is unmounted, the mount point is empty again.
▶ This allows applications to access files and directories easily, regardless of their
exact storage location
Filesystems (2)
▶ Create a mount point, which is just a directory

$ sudo mkdir /mnt/usbkey
▶ It is empty
$ ls /mnt/usbkey
$
▶ Mount a storage device in this mount point
$ sudo mount -t vfat /dev/sda1 /mnt/usbkey
$
▶ You can access the contents of the USB key
$ ls /mnt/usbkey
docs prog.c picture.png movie.avi
$
mount / umount
▶ mount allows to mount filesystems

▶ mount -t type device mountpoint
▶ type is the type of filesystem (optional for non-virtual filesystems)
▶ device is the storage device, or network location to mount
▶ mountpoint is the directory where files of the storage device or network location will
be accessible
▶ mount with no arguments shows the currently mounted filesystems
▶ umount allows to unmount filesystems
▶ This is needed before rebooting, or before unplugging a USB key, because the Linux
kernel caches writes in memory to increase performance. umount makes sure that
these writes are committed to the storage.
Root filesystem
▶ A particular filesystem is mounted at the root of the hierarchy, identified by /

▶ This filesystem is called the root filesystem
▶ As mount and umount are programs, they are files inside a filesystem.
▶ They are not accessible before mounting at least one filesystem.
▶ As the root filesystem is the first mounted filesystem, it cannot be mounted with
the normal mount command
▶ It is mounted directly by the kernel, according to the root= kernel option
▶ When no root filesystem is available, the kernel panics:
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown block(0,0)
Location of the root filesystem
▶ It can be mounted from different locations

▶ From the partition of a hard disk
▶ From the partition of a USB key
▶ From the partition of an SD card
▶ From the partition of a NAND flash chip or similar type of storage device
▶ From the network, using the NFS protocol
▶ From memory, using a pre-loaded filesystem (by the bootloader)
▶ etc.
▶ It is up to the system designer to choose the configuration for the system, and
configure the kernel behavior with root=
Mounting rootfs from storage devices
▶ Partitions of a hard disk or USB key

▶ root=/dev/sdXY, where X is a letter indicating the device, and Y a number
indicating the partition
▶ /dev/sdb2 is the second partition of the second disk drive (either USB key or ATA
hard drive)
▶ Partitions of an SD card
▶ root=/dev/mmcblkXpY, where X is a number indicating the device and Y a number
indicating the partition
▶ /dev/mmcblk0p2 is the second partition of the first device
▶ Partitions of flash storage
▶ root=/dev/mtdblockX, where X is the partition number
▶ /dev/mtdblock3 is the fourth partition of a NAND flash chip (if only one NAND
flash chip is present)
Mounting rootfs over the network (1)
Once networking works, your root filesystem could be a directory on your GNU/Linux
development host, exported by NFS (Network File System). This is very convenient for
system development:
▶ Makes it very easy to update files on the root filesystem, without rebooting.
Much faster than through the serial port.
▶ Can have a big root filesystem even if you don’t have support for internal or
external storage yet.
▶ The root filesystem can be huge. You can even build native compiler tools and
build all the tools you need on the target itself (better to cross-compile though).
On the development workstation side, a NFS server is needed

▶ Install an NFS server (example: Debian, Ubuntu)
sudo apt install nfs-kernel-server
▶ Add the exported directory to your /etc/exports file:
/home/tux/rootfs 192.168.1.111(rw,no_root_squash,no_subtree_check)
▶ 192.168.1.111 is the client IP address
▶ rw,no_root_squash,no_subtree_check are the NFS server options for this
directory export.
▶ Start or restart your NFS server (example: Debian, Ubuntu)
sudo /etc/init.d/nfs-kernel-server restart
▶ On the target system

▶ The kernel must be compiled with
▶ CONFIG_NFS_FS=y (NFS client support)
▶ CONFIG_IP_PNP=y (configure IP at boot time)
▶ CONFIG_ROOT_NFS=y (support for NFS as rootfs)
▶ The kernel must be booted with the following parameters:
▶ root=/dev/nfs (we want rootfs over NFS)
▶ ip=192.168.1.111 (target IP address)
▶ nfsroot=192.168.1.110:/home/tux/rootfs/ (NFS server details)
▶ You may need to add ”,nfsvers=3” to the nfsroot setting, as an NFS version 2
client may be rejected by the NFS server in recent GNU/Linux distributions.
rootfs in memory: initramfs (1)
▶ It is also possible to have the root filesystem integrated into the kernel image
▶ It is therefore loaded into memory together with the kernel
▶ This mechanism is called initramfs
▶ It integrates a compressed archive of the filesystem into the kernel image
▶ Variant: the compressed archive can also be loaded separately by the bootloader.
▶ It is useful for two cases
▶ Fast booting of very small root filesystems. As the filesystem is completely loaded at
boot time, application startup is very fast.
▶ As an intermediate step before switching to a real root filesystem, located on devices
for which drivers not part of the kernel image are needed (storage drivers, filesystem
drivers, network drivers). This is always used on the kernel of desktop/server
distributions to keep the kernel image size reasonable.
▶ The contents of an initramfs are defined at the kernel configuration level, with the
CONFIG_INITRAMFS_SOURCE option
▶ Can be the path to a directory containing the root filesystem contents
▶ Can be the path to a cpio archive
▶ Can be a text file describing the contents of the initramfs
(see documentation for details)
▶ The kernel build process will automatically take the contents of the
CONFIG_INITRAMFS_SOURCE option and integrate the root filesystem into the
kernel image
▶ Details (in kernel sources):
Documentation/filesystems/ramfs-rootfs-initramfs.txt
Documentation/early-userspace/README
Contents
Root filesystem organization
▶ The organization of a Linux root filesystem in terms of directories is well-defined

by the Filesystem Hierarchy Standard
▶ https://wiki.linuxfoundation.org/lsb/fhs
▶ Most Linux systems conform to this specification
▶ Applications expect this organization
▶ It makes it easier for developers and users as the filesystem organization is similar in
all systems
Important directories (1)
/bin Basic programs

/boot Kernel image (only when the kernel is loaded from a filesystem, not
common on non-x86 architectures)
/dev Device files (covered later)
/etc System-wide configuration
/home Directory for the users home directories
/lib Basic libraries
/media Mount points for removable media
/mnt Mount points for static media
/proc Mount point for the proc virtual filesystem
Important directories (2)
/root Home directory of the root user

/sbin Basic system programs
/sys Mount point of the sysfs virtual filesystem
/tmp Temporary files
/usr /usr/bin Non-basic programs
/usr/lib Non-basic libraries
/usr/sbin Non-basic system programs
/var Variable data files. This includes spool directories and files,
administrative and logging data, and transient and temporary files
Separation of programs and libraries
▶ Basic programs are installed in /bin and /sbin and basic libraries in /lib
▶ All other programs are installed in /usr/bin and /usr/sbin and all other libraries
in /usr/lib
▶ In the past, on UNIX systems, /usr was very often mounted over the network,
through NFS
▶ In order to allow the system to boot when the network was down, some binaries
and libraries are stored in /bin, /sbin and /lib
▶ /bin and /sbin contain programs like ls, ifconfig, cp, bash, etc.
▶ /lib contains the C library and sometimes a few other basic libraries
▶ All other programs and libraries are in /usr
Device Files
Devices
▶ One of the kernel important roles is to allow applications to access hardware

devices
▶ In the Linux kernel, most devices are presented to user space applications through
two different abstractions
▶ Character device
▶ Block device
▶ Internally, the kernel identifies each device by a triplet of information
▶ Type (character or block)
▶ Major (typically the category of device)
▶ Minor (typically the identifier of the device)
Types of devices
▶ Block devices
▶ A device composed of fixed-sized blocks, that can be read and written to store data
▶ Used for hard disks, USB keys, SD cards, etc.
▶ Character devices
▶ Originally, an infinite stream of bytes, with no beginning, no end, no size. The pure
example: a serial port.
▶ Used for serial ports, terminals, but also sound cards, video acquisition devices,
frame buffers
▶ Most of the devices that are not block devices are represented as character devices
by the Linux kernel
Devices: everything is a file
▶ A very important UNIX design decision was to represent most system objects as
files
▶ It allows applications to manipulate all system objects with the normal file API
(open, read, write, close, etc.)
▶ So, devices had to be represented as files to the applications
▶ This is done through a special artifact called a device file
▶ It is a special type of file, that associates a file name visible to user space
applications to the triplet (type, major, minor) that the kernel understands
▶ All device files are by convention stored in the /dev directory
Device files examples
Example of device files in a Linux system
$ ls -l /dev/ttyS0 /dev/tty1 /dev/sda1 /dev/sda2 /dev/zero

brw-rw---- 1 root disk 8, 1 2011-05-27 08:56 /dev/sda1
brw-rw---- 1 root disk 8, 2 2011-05-27 08:56 /dev/sda2
crw------- 1 root root 4, 1 2011-05-27 08:57 /dev/tty1
crw-rw---- 1 root dialout 4, 64 2011-05-27 08:56 /dev/ttyS0
crw-rw-rw- 1 root root 1, 5 2011-05-27 08:56 /dev/zero
Example C code that uses the usual file API to write data to a serial port
int fd;
fd = open("/dev/ttyS0", O_RDWR);
write(fd, "Hello", 5);
close(fd);
Creating device files
▶ Before Linux 2.6.32, on basic Linux systems, the device files had to be created
manually using the mknod command
▶ mknod /dev/<device> [c|b] major minor
▶ Needed root privileges
▶ Coherency between device files and devices handled by the kernel was left to the
system developer
▶ The devtmpfs virtual filesystem can be mounted on /dev and contains all the
devices known to the kernel. The CONFIG_DEVTMPFS_MOUNT kernel configuration
option makes the kernel mount it automatically at boot time, except when
booting on an initramfs.
Pseudo Filesystems
proc virtual filesystem
▶ The proc virtual filesystem exists since the beginning of Linux

▶ It allows
▶ The kernel to expose statistics about running processes in the system
▶ The user to adjust at runtime various system parameters about process
management, memory management, etc.
▶ The proc filesystem is used by many standard user space applications, and they
expect it to be mounted in /proc
▶ Applications such as ps or top would not work without the proc filesystem
▶ Command to mount proc:
mount -t proc nodev /proc
▶ Documentation/filesystems/proc.txt in the kernel sources
▶ man proc
proc contents
▶ One directory for each running process in the system

▶ /proc/<pid>
▶ cat /proc/3840/cmdline
▶ It contains details about the files opened by the process, the CPU and memory
usage, etc.
▶ /proc/interrupts, /proc/devices, /proc/iomem, /proc/ioports contain
general device-related information
▶ /proc/cmdline contains the kernel command line
▶ /proc/sys contains many files that can be written to adjust kernel parameters
▶ They are called sysctl. See Documentation/sysctl/ in kernel sources.
▶ Example
echo 3 > /proc/sys/vm/drop_caches
sysfs filesystem
▶ It allows to represent in user space the vision that the kernel has of the buses,
devices and drivers in the system
▶ It is useful for various user space applications that need to list and query the
available hardware, for example udev or mdev.
▶ All applications using sysfs expect it to be mounted in the /sys directory
▶ Command to mount /sys:
mount -t sysfs nodev /sys
▶ $ ls /sys/
block bus class dev devices firmware
fs kernel module power
Minimal filesystem
Basic applications
▶ In order to work, a Linux system needs at least a few applications

▶ An init application, which is the first user space application started by the kernel after
mounting the root filesystem (see https://en.wikipedia.org/wiki/Init):
▶ The kernel tries to run the command specified by the init= command line
parameter if available.
▶ Otherwise, it tries to run /sbin/init, /bin/init, /etc/init and /bin/sh.
▶ In the case of an initramfs, it will only look for /init. Another path can be supplied
by the rdinit kernel argument.
▶ If none of this works, the kernel panics and the boot process is stopped.
▶ The init application is responsible for starting all other user space applications and
services:
▶ A shell, to implement scripts, automate tasks, and allow a user to interact with the system
▶ Basic UNIX executables, for use in system scripts or in interactive shells: mv, cp, mkdir,
cat, modprobe, mount, ifconfig, etc.
▶ These basic components have to be integrated into the root filesystem to make it usable
Overall booting process
Overall booting process with initramfs
Busybox
Busybox

Why Busybox?
▶ A Linux system needs a basic set of programs to work

▶ An init program
▶ A shell
▶ Various basic utilities for file manipulation and system configuration
▶ In normal Linux systems, these programs are provided by different projects
▶ coreutils, bash, grep, sed, tar, wget, modutils, etc. are all different projects
▶ A lot of different components to integrate
▶ Components not designed with embedded systems constraints in mind: they are not
very configurable and have a wide range of features
▶ Busybox is an alternative solution, extremely common on embedded systems
General purpose toolbox: BusyBox
▶ Rewrite of many useful UNIX command line utilities

▶ Created in 1995 to implement a rescue and installer system for Debian, fitting in a
single floppy disk.
▶ Integrated into a single project, which makes it easy to work with
▶ Designed with embedded systems in mind: highly configurable, no unnecessary
features
▶ All the utilities are compiled into a single executable, /bin/busybox
▶ Symbolic links to /bin/busybox are created for each application integrated into
Busybox
▶ For a fairly featureful configuration, less than 500 KB (statically compiled with
uClibc) or less than 1 MB (statically compiled with glibc).
▶ https://www.busybox.net/
BusyBox commands!
[, [[, acpid, add-shell, addgroup, adduser, adjtimex, ar, arch, arp, arping, awk, base64, basename, bbconfig, bc, beep,
blkdiscard, blkid, blockdev, bootchartd, brctl, bunzip2, busybox, bzcat, bzip2, cal, cat, chat, chattr, chcon, chgrp, chmod,
chown, chpasswd, chpst, chroot, chrt, chvt, cksum, clear, cmp, comm, conspy, cp, cpio, crond, crontab, cryptpw, cttyhack, cut,
date, dc, dd, deallocvt, delgroup, deluser, depmod, devmem, df, diff, dirname, dmesg, dnsd, dnsdomainname, dos2unix, dpkg, dpkg-
deb, du, dumpkmap, dumpleases, echo, ed, egrep, eject, env, envdir, envuidgid, ether-wake, expand, expr, factor, fakeidentd,
fallocate, false, fatattr, fbset, fbsplash, fdflush, fdformat, fdisk, fgconsole, fgrep, find, findfs, flash_eraseall, flash_lock,
flash_unlock, flashcp, flock, fold, free, freeramdisk, fsck, fsck.minix, fsfreeze, fstrim, fsync, ftpd, ftpget, ftpput, fuser,
getenforce, getopt, getsebool, getty, grep, groups, gunzip, gzip, halt, hd, hdparm, head, hexdump, hexedit, hostid, hostname,
httpd, hush, hwclock, id, ifconfig, ifdown, ifenslave, ifplugd, ifup, inetd, init, insmod, install, ionice, iostat, ip, ipaddr,
ipcalc, ipcrm, ipcs, iplink, ipneigh, iproute, iprule, iptunnel, kbd_mode, kill, killall, killall5, klogd, last, less, link,
linux32, linux64, linuxrc, ln, load_policy, loadfont, loadkmap, logger, login, logname, logread, losetup, lpd, lpq, lpr, ls,
lsattr, lsmod, lsof, lspci, lsscsi, lsusb, lzcat, lzma, lzop, lzopcat, makedevs, makemime, man, matchpathcon, md5sum, mdev, mesg,
microcom, minips, mkdir, mkdosfs, mke2fs, mkfifo, mkfs.ext2, mkfs.minix, mkfs.reiser, mkfs.vfat, mknod, mkpasswd, mkswap, mktemp,
modinfo, modprobe, more, mount, mountpoint, mpstat, mt, mv, nameif, nanddump, nandwrite, nbd-
client, nc, netcat, netstat, nice, nl, nmeter, nohup, nologin, nproc, nsenter, nslookup, ntpd, nuke, od, openvt, partprobe,
passwd, paste, patch, pgrep, pidof, ping, ping6, pipe_progress, pivot_root, pkill, pmap, popmaildir, poweroff, printenv, printf,
ps, pscan, pstree, pwd, pwdx, raidautorun, rdate, rdev, readahead, readlink, readprofile, realpath, reboot, reformime, remove-
shell, renice, reset, resize, restorecon, resume, rev, rfkill, rm, rmdir, rmmod, route, rpm, rpm2cpio, rtcwake, run-init, run-
parts, runcon, runlevel, runsv, runsvdir, rx, script, scriptreplay, sed, selinuxenabled, sendmail, seq, sestatus, setarch,
setconsole, setenforce, setfattr, setfiles, setfont, setkeycodes, setlogcons, setpriv, setsebool, setserial, setsid, setuidgid,
sh, sha1sum, sha256sum, sha3sum, sha512sum, showkey, shred, shuf, slattach, sleep, smemcap, softlimit, sort, split, ssl_client,
start-stop-daemon, stat, strings, stty, su, sulogin, sum, sv, svc, svlogd, svok, swapoff, swapon, switch_root, sync, sysctl,
syslogd, tac, tail, tar, taskset, tc, tcpsvd, tee, telnet, telnetd, test, tftp, tftpd, time, timeout, top, touch, tr, traceroute,
traceroute6, true, truncate, ts, tty, ttysize, tunctl, tune2fs, ubiattach, ubidetach, ubimkvol, ubirename, ubirmvol, ubirsvol,
ubiupdatevol, udhcpc, udhcpd, udpsvd, uevent, umount, uname, uncompress, unexpand, uniq, unit, unix2dos, unlink, unlzma, unlzop,
unxz, unzip, uptime, users, usleep, uudecode, uuencode, vconfig, vi, vlock, volname, w, wall, watch, watchdog, wc, wget, which,
who, whoami, whois, xargs, xxd, xz, xzcat, yes, zcat, zcip
Source: run /bin/busybox
Applet highlight: Busybox init
▶ Busybox provides an implementation of an init program

▶ Simpler than the init implementation found on desktop/server systems (SysV init
or systemd)
▶ A single configuration file: /etc/inittab
▶ Each line has the form <id>::<action>:<process>
▶ Allows to run services at startup, and to make sure that certain services are always
running on the system
▶ See examples/inittab in Busybox for details on the configuration
Applet highlight - BusyBox vi
▶ If you are using BusyBox, adding vi support only adds 20K. (built with shared
libraries, using uClibc).
▶ You can select which exact features to compile in.
▶ Users hardly realize that they are using a lightweight vi version!
▶ Tip: you can learn vi on the desktop, by running the vimtutor command.
Configuring BusyBox
▶ Get the latest stable sources from https://busybox.net

▶ Configure BusyBox (creates a .config file):
▶ make defconfig
Good to begin with BusyBox.
Configures BusyBox with all options for regular users.
▶ make allnoconfig
Unselects all options. Good to configure only what you need.
▶ make xconfig (graphical, needs the libqt3-mt-dev package)
or make menuconfig (text)
Same configuration interfaces as the ones used by the Linux kernel (though older
versions are used).
BusyBox make xconfig
You can choose:

▶ the commands to
compile,
▶ and even the
command options
and features that you
need!
Compiling BusyBox
▶ Set the cross-compiler prefix in the configuration interface:

Settings -> Build Options -> Cross Compiler prefix
Example: arm-linux-
▶ Set the installation directory in the configuration interface:
Settings -> Installation Options -> BusyBox installation prefix
▶ Add the cross-compiler path to the PATH environment variable:
export PATH=$HOME/x-tools/arm-unknown-linux-uclibcgnueabi/bin:$PATH
▶ Compile BusyBox:
make
▶ Install it (this creates a UNIX directory structure symbolic links to the busybox
executable):
make install
Practical lab - A tiny embedded system
▶ Make Linux boot on a directory on your

workstation, shared by NFS
▶ Create and configure a minimalistic Linux
embedded system
▶ Install and use BusyBox
▶ System startup with /sbin/init
▶ Set up a simple web interface
▶ Use shared libraries
Block filesystems
Block filesystems

Block filesystems
Block devices
Block vs. flash
▶ Storage devices are classified in two main types: block devices and flash devices
▶ They are handled by different subsystems and different filesystems
▶ Block devices can be read and written to on a per-block basis, in random order,
without erasing.
▶ Hard disks, RAM disks
▶ USB keys, SSD, SD card, eMMC: these are based on flash storage, but have an
integrated controller that emulates a block device, managing the flash in a
transparent way.
▶ Raw flash devices are driven by a controller on the SoC. They can be read, but
writing requires prior erasing, and often occurs on a larger size than the “block”
size.
▶ NOR flash, NAND flash
Block device list
▶ The list of all block devices available in the system can be found in
/proc/partitions
$ cat /proc/partitions
major minor #blocks name
179 0 3866624 mmcblk0

179 1 73712 mmcblk0p1
179 2 3792896 mmcblk0p2
8 0 976762584 sda
8 1 1060258 sda1
8 2 975699742 sda2
▶ /sys/block/ also stores information about each block device, for example
whether it is removable storage or not.
Partitioning
▶ Block devices can be partitioned to store different parts of a system

▶ The partition table is stored inside the device itself, and is read and analyzed
automatically by the Linux kernel
▶ mmcblk0 is the entire device
▶ mmcblk0p2 is the second partition of mmcblk0
▶ Two partition table formats:
▶ MBR, the legacy format
▶ GPT, the new format, not used everywhere yet, supporting disks bigger than 2 TB.
▶ Numerous tools to create and modify the partitions on a block device: fdisk,
cfdisk, sfdisk, parted, etc.
Transfering data to a block device
▶ It is often necessary to transfer data to or from a block device in a raw way

▶ Especially to write a filesystem image to a block device
▶ This directly writes to the block device itself, bypassing any filesystem layer.
▶ The block devices in /dev/ allow such raw access
▶ dd (disk duplicate) is the tool of choice for such transfers:
▶ dd if=/dev/mmcblk0p1 of=testfile bs=1M count=16
Transfers 16 blocks of 1 MB from /dev/mmcblk0p1 to testfile
▶ dd if=testfile of=/dev/sda2 bs=1M seek=4
Transfers the complete contents of testfile to /dev/sda2, by blocks of 1 MB, but
starting at offset 4 MB in /dev/sda2
▶ Typical mistake: copying a file to a filesystem without mounting it first:
dd if=zImage of=/dev/sda1
Instead, you should use:
sudo mount /dev/sda1 /boot
cp zImage /boot/
Block filesystems
Available filesystems
Standard Linux filesystem format: ext2, ext3, ext4
▶ The standard filesystem used on Linux systems is the series of ext{2,3,4}

filesystems
▶ ext2
▶ ext3, brought journaling compared to ext2
▶ ext4, mainly brought performance improvements and support for even larger
filesystems
▶ It supports all features Linux needs in a root filesystem: permissions, ownership,
device files, symbolic links, etc.
Journaled filesystems
▶ Unlike simpler filesystems (ext2, vfat...),

designed to stay in a coherent state even after
system crashes or a sudden poweroff.
▶ Writes are first described in the journal before
being committed to files (can be all writes, or
only metadata writes depending on the
configuration)
▶ Allows to skip a full disk check at boot time
after an unclean shutdown.
Filesystem recovery after crashes
▶ Thanks to the journal, the recovery at boot

time is quick, since the operations in progress
at the moment of the unclean shutdown are
clearly identified
▶ Does not mean that the latest writes made it
to the storage: this depends on syncing the
changes to the filesystem.
See https://en.wikipedia.org/wiki/
Journaling_file_system for further details.
Other journaled Linux/UNIX filesystems
▶ btrfs, intended to become the next standard filesystem for Linux. Integrates
numerous features: data checksuming, integrated volume management,
snapshots, etc.
▶ XFS, high-performance filesystem inherited from SGI IRIX, still actively developed.
▶ JFS, inherited from IBM AIX. No longer actively developed, provided mainly for
compatibility.
▶ reiserFS, used to be a popular filesystem, but its latest version Reiser4 was
never merged upstream.
All those filesystems provide the necessary functionalities for Linux systems: symbolic
links, permissions, ownership, device files, etc.
F2FS: filesystem for flash-based storage
https://en.wikipedia.org/wiki/F2FS
▶ Filesystem that takes into account the characteristics of flash-based storage:
eMMC, SD cards, SSD, etc.
▶ Developed and contributed by Samsung
▶ Available in the mainline Linux kernel
▶ For optimal results, need a number of details about the storage internal behavior
which may not easy to get
▶ Benchmarks: best performer on flash devices most of the time:
See https://lwn.net/Articles/520003/
▶ Technical details: https://lwn.net/Articles/518988/
▶ Not as widely used as ext3,4, even on flash-based storage.
Squashfs: read-only filesystem
▶ Read-only, compressed filesystem for block devices. Fine for parts of a filesystem
which can be read-only (kernel, binaries...)
▶ Great compression rate, which generally brings improved read performance
▶ Used in most live CDs and live USB distributions
▶ Supports several compression algorithms (LZO, XZ, etc.)
▶ Benchmarks: roughly 3 times smaller than ext3, and 2-4 times faster
(https://elinux.org/Squash_Fs_Comparisons)
Compatibility filesystems
Linux also supports several other filesystem formats, mainly to be interopable with
other operating systems:
▶ vfat for compatibility with the FAT filesystem used in the Windows world and on
numerous removable devices
▶ Also convenient to store bootloader binaries (FAT easy to understand for ROM code)
▶ This filesystem does not support features like permissions, ownership, symbolic links,
etc. Cannot be used for a Linux root filesystem.
▶ Linux now supports the exFAT filesystem too (exfat).
▶ ntfs for compatibility with the NTFS filesystem used on Windows
▶ hfs for compatibility with the HFS filesystem used on Mac OS
▶ iso9660, the filesystem format used on CD-ROMs, obviously a read-only
filesystem
tmpfs: filesystem in RAM
▶ Not a block filesystem of course!

▶ Perfect to store temporary data in RAM: system log files, connection data,
temporary files...
▶ More space-efficient than ramdisks: files are directly in the file cache, grows and
shrinks to accommodate stored files
▶ How to use: choose a name to distinguish the various tmpfs instances you could
have. Examples:
mount -t tmpfs run /var/run
mount -t tmpfs shm /dev/shm
▶ See Documentation/filesystems/tmpfs.txt in kernel sources.
Block filesystems
Using block filesystems
Creating ext2/ext3/ext4 filesystems
▶ To create an empty ext2/ext3/ext4 filesystem on a block device or inside an

already-existing image file
▶ mkfs.ext2 /dev/hda3
▶ mkfs.ext3 /dev/sda2
▶ mkfs.ext4 /dev/sda3
▶ mkfs.ext2 disk.img
▶ To create a filesystem image from a directory containing all your files and
directories
▶ Use the genext2fs tool, from the package of the same name
▶ This tool only supports ext2. No equivalents exist for ext3 and ext4.
▶ genext2fs -d rootfs/ rootfs.img
▶ Your image is then ready to be transferred to your block device
Mounting filesystem images
▶ Once a filesystem image has been created, one can access and modifies its
contents from the development workstation, using the loop mechanism
▶ Example:
genext2fs -d rootfs/ rootfs.img
mkdir /tmp/tst
mount -t ext2 -o loop rootfs.img /tmp/tst
▶ In the /tmp/tst directory, one can access and modify the contents of the
rootfs.img file.
▶ This is possible thanks to loop, which is a kernel driver that emulates a block
device with the contents of a file.
▶ Do not forget to run umount before using the filesystem image!
Creating squashfs filesystems
▶ Need to install the squashfs-tools package

▶ Can only create an image: creating an empty squashfs filesystem would be
useless, since it’s read-only.
▶ To create a squashfs image:
▶ mksquashfs rootfs/ rootfs.sqfs -noappend
▶ -noappend: re-create the image from scratch rather than appending to it
▶ Mounting a squashfs filesystem:
▶ mount -t squashfs /dev/<device> /mnt
Mixing read-only and read-write filesystems
Good idea to split your block storage into:

▶ A compressed read-only partition (Squashfs)
Typically used for the root filesystem (binaries,
kernel...).
Compression saves space. Read-only access protects
your system from mistakes and data corruption.
▶ A read-write partition with a journaled filesystem (like
ext4)
Used to store user or configuration data.
Guarantees filesystem integrity after power off or
crashes.
▶ Ram storage for temporary files (tmpfs)
Issues with flash-based block storage
▶ Flash storage made available only through a block interface.

▶ Hence, no way to access a low level flash interface and use the Linux filesystems
doing wear leveling.
▶ No details about the layer (Flash Translation Layer) they use. Details are kept as
trade secrets, and may hide poor implementations.
▶ Not knowing about the wear leveling algorithm, it is highly recommended to limit
the number of writes to these devices.
Practical lab - Block filesystems
▶ Creating partitions on your block storage

▶ Booting your system with a mix of filesystems:
SquashFS for the root filesystem (including
applications), ext4 for configuration and user
data, and tmpfs for temporary system files.

development

Contents
▶ Using open-source components

▶ Tools for the target device
▶ Networking
▶ System utilities
▶ Language interpreters
▶ Audio, video and multimedia
▶ Graphical toolkits
▶ Databases
▶ Web browsers
▶ System building
Leveraging open-source components in an

Third party libraries and applications
▶ One of the advantages of embedded Linux is the wide range of third-party libraries
and applications that one can leverage in its product
▶ They are freely available, freely distributable, and thanks to their open-source
nature, they can be analyzed and modified according to the needs of the project
▶ However, efficiently re-using these components is not always easy. One must:
▶ Find these components
▶ Choose the most appropriate ones
▶ Cross-compile them
▶ Integrate them in the embedded system and with the other applications
Find existing components
▶ Free Software Directory

https://directory.fsf.org
▶ Look at other embedded Linux products, and see what their components are
▶ Look at the list of software packaged by embedded Linux build systems
▶ These are typically chosen for their suitability to embedded systems
▶ Ask the community or Google
▶ This presentation will also feature a list of components for common needs
Choosing components
Not all free software components are necessarily good to re-use. One must pay
attention to:
▶ Vitality of the developer and user communities. This vitality ensures long-term
maintenance of the component, and relatively good support. It can be measured
by looking at the mailing-list traffic and the version control system activity.
▶ Quality of the component. Typically, if a component is already available through
embedded build systems, and has a dynamic user community, it probably means
that the quality is relatively good.
▶ License. The license of the component must match your licensing constraints.
For example, GPL libraries cannot be used in proprietary applications.
▶ Technical requirements. Of course, the component must match your technical
requirements. But don’t forget that you can improve the existing components if a
feature is missing!
Licenses (1)
▶ All software that are under a free software license give four freedoms to all users
▶ Freedom to use
▶ Freedom to study
▶ Freedom to copy
▶ Freedom to modify and distribute modified copies
▶ See https://www.gnu.org/philosophy/free-sw.html for a definition of Free
Software
▶ Open Source software, as per the definition of the Open Source Initiative, are
technically similar to Free Software in terms of freedoms
▶ See https://www.opensource.org/docs/osd for the definition of Open Source
Software
Licenses (2)
▶ Free Software licenses fall in two main categories

▶ The copyleft licenses
▶ The non-copyleft licenses
▶ The concept of copyleft is to ask for reciprocity in the freedoms
given to a user.
▶ The result is that when you receive a software under a copyleft
free software license and distribute modified versions of it, you
must do so under the same license
▶ Same freedoms to the new users
▶ It’s an incentive to contribute back your changes instead of
keeping them secret
▶ Non-copyleft licenses have no such requirements, and modified
versions can be kept proprietary, but they still require attribution
GPL
▶ GNU General Public License

▶ Covers around 55% of the free software projects
▶ Including the Linux kernel, Busybox and many applications
▶ Is a copyleft license
▶ Requires derivative works to be released under the same license
▶ Programs linked with a library released under the GPL must also be released under
the GPL
▶ Some programs covered by version 2 (Linux kernel, Busybox, U-Boot...)
▶ A number of programs are covered by version 3, released in 2007: gcc, bash, grub,
samba, Qt...
▶ Major change for the embedded market: the requirement that the user must be able
to run the modified versions on the device, if the device is a consumer device
GPL: redistribution
▶ No obligation when the software is not distributed

▶ You can keep your modifications secret until the product delivery
▶ It is then authorized to distribute binary versions, if one of the following
conditions is met:
▶ Convey the binary with a copy of the source on a physical medium
▶ Convey the binary with a written offer valid for 3 years that indicates how to fetch
the source code
▶ Convey the binary with the network address of a location where the source code can
be found
▶ See section 6. of the GPL license
▶ In all cases, the attribution and the license must be preserved
▶ See section 4. and 5.
LGPL
▶ GNU Lesser General Public License

▶ Covers around 10% of the free software projects
▶ A copyleft license
▶ Modified versions must be released under the same license
▶ But, programs linked against a library under the LGPL do not need to be released
under the LGPL and can be kept proprietary.
▶ However, the user must keep the ability to update the library independently from the
program. Dynamic linking is the easiest solution. Statically linked executables are
only possible if the developer provides a way to relink with an update (with source
code or linkable object files).
▶ If this constraint is too strong for you, use a library with a more permissive license if
you can (such as the musl C library, with MIT license).
▶ Used instead of the GPL for most of the libraries, including the C libraries
▶ Some exceptions: MySQL, or Qt <= 4.4
▶ Also available in two versions, v2 and v3
Licensing: examples
▶ You make modifications to the Linux kernel (to add drivers or adapt to your
board), to Busybox, U-Boot or other GPL software
▶ You must release the modified versions under the same license, and be ready to
distribute the source code to your customers
▶ You make modifications to the C library or any other LGPL library
▶ You must release the modified versions under the same license
▶ You create an application that relies on LGPL libraries
▶ You can keep your application proprietary, but you must link dynamically with the
LGPL libraries
▶ You make modifications to a non-copyleft licensed software
▶ You can keep your modifications proprietary, but you must still credit the authors
Non-copyleft licenses
▶ A large family of non-copyleft licenses that are relatively similar in their

requirements
▶ A few examples
▶ Apache license (around 4%)
▶ BSD license (around 6%)
▶ MIT license (around 4%)
▶ X11 license
▶ Artistic license (around 9 %)
BSD license
Copyright (c) <year>, <copyright holder>

All rights reserved.
Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are
met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
* Neither the name of the <organization> nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
[...]
Is this free software?
▶ Most of the free software projects are covered by 10 well-known licenses, so it is

fairly easy for the majority of projects to get a good understanding of the license
▶ Otherwise, read the license text
▶ Check Free Software Foundation’s opinion
https://www.fsf.org/licensing/licenses/
▶ Check Open Source Initiative’s opinion
https://www.opensource.org/licenses
Respect free software licenses
▶ Free Software is not public domain software, the distributors have obligations due
to the licenses
▶ Before using a free software component, make sure the license matches your project
constraints
▶ Make sure to keep a complete list of the free software packages you use, the original
version numbers you used, and to keep your modifications and adaptations
well-separated from the original version.
▶ Buildroot and Yocto Project can generate this list for you!
▶ Conform to the license requirements before shipping the product to the customers.
▶ Free Software licenses have been enforced successfully in courts. Organizations
which can help:
▶ Software Freedom Law Center, https://www.softwarefreedom.org/
▶ Software Freedom Conservancy, https://sfconservancy.org/
▶ Ask your legal department!
Keeping changes separate (1)
▶ When integrating existing open-source components in your project, it is

sometimes needed to make modifications to them
▶ Better integration, reduced footprint, bug fixes, new features, etc.
▶ Instead of mixing these changes, it is much better to keep them separate from the
original component version
▶ If the component needs to be upgraded, easier to know what modifications were
made to the component
▶ If support from the community is requested, important to know how different the
component we’re using is from the upstream version
▶ Makes contributing the changes back to the community possible
▶ It is even better to keep the various changes made on a given component separate
▶ Easier to review and to update to newer versions
Keeping changes separate (2)
▶ The simplest solution is to use Quilt

▶ Quilt is a tool that allows to maintain a stack of patches over source code
▶ Makes it easy to add, remove modifications from a patch, to add and remove
patches from stack and to update them
▶ The stack of patches can be integrated into your version control system
▶ https://savannah.nongnu.org/projects/quilt/
▶ Another solution is to use a version control system
▶ Import the original component version into your version control system
▶ Maintain your changes in a separate branch
Tools for the target device: Networking
ssh server and client: Dropbear
https://matt.ucc.asn.au/dropbear/dropbear.html
▶ Very small memory footprint ssh server for embedded systems
▶ Satisfies most needs. Both client and server!
▶ Size: 110 KB, statically compiled with uClibc on x86.
(OpenSSH client and server: approx 1200 KB, dynamically compiled with glibc on
x86)
▶ Useful to:
▶ Get a remote console on the target device
▶ Copy files to and from the target device (scp or rsync -e ssh).
▶ An alternative to OpenSSH, used on desktop and server systems.
Benefits of a web server interface
Many network enabled devices can just have a network interface

▶ Examples: modems / routers, IP cameras, printers...
▶ No need to develop drivers and applications for computers connected to the
device. No need to support multiple operating systems!
▶ Just need to develop static or dynamic HTML pages (possibly with powerful
client-side JavaScript).
Easy way of providing access to device information and parameters.
▶ Reduced hardware costs (no LCD, very little storage space needed)
Web servers
▶ BusyBox http server: https://busybox.net

▶ Tiny: only adds 9 K to BusyBox (dynamically linked with glibc
on x86, with all features enabled.)
▶ Sufficient features for many devices with a web interface,
including CGI, http authentication and script support (like PHP,
with a separate interpreter).
▶ License: GPL
▶ Other possibilities: lightweight servers like Boa, thttpd, lighttpd,
nginx, etc
▶ Some products are using Node.js, which is lightweight enough to
be used.
Network utilities (1)
▶ avahi is an implementation of Multicast DNS Service Discovery, that allows

programs to publish and discover services on a local network
▶ bind, a DNS server
▶ iptables, the user space tools associated to the Linux firewall, Netfilter
▶ iw and wireless tools, the user space tools associated to Wireless devices
▶ netsnmp, implementation of the SNMP protocol
▶ openntpd, implementation of the Network Time Protocol, for clock
synchronization
▶ openssl, a toolkit for SSL and TLS connections
Network utilities (2)
▶ pppd, implementation of the Point to Point Protocol, used for dial-up connections
▶ samba, implements the SMB and CIFS protocols, used by Windows to share files
and printers
▶ coherence, a UPnP/DLNA implementation
▶ vsftpd, proftpd, FTP servers
Tools for the target device: System utilities
System utilities
▶ dbus, an inter-application object-oriented communication bus

▶ gpsd, a daemon to interpret and share GPS data
▶ libusb, a user space library for accessing USB devices without writing an in-kernel
driver
▶ Utilities for kernel subsystems: i2c-tools for I2C, input-tools for input, mtd-utils
for MTD devices, usbutils for USB devices
Tools for the target device: Language

interpreters
Language interpreters
▶ Interpreters for the most common scripting languages are available. Useful for
▶ Application development
▶ Web services development
▶ Scripting
▶ Languages supported
▶ Lua
▶ Python
▶ Perl
▶ Ruby
▶ TCL
▶ PHP
Tools for the target device: Audio, video and

multimedia
Audio, video and multimedia
▶ GStreamer, a multimedia framework

▶ Allows to decode/encode a wide variety of codecs.
▶ Supports hardware encoders and decoders through plugins, proprietary/specific
plugins are often provided by SoC vendors.
▶ alsa-lib, the user space tools associated to the ALSA sound kernel subsystem
▶ Directly using encoding and decoding libraries, if you decide not to use GStreamer:
libavcodec, libogg, libtheora, libvpx, flac (lossless audio compression), libvorbis,
libopus (better than vorbis!), libmad, libsndfile, speex (for human speech), etc.
Tools for the target device: Graphical toolkits
Graphical toolkits: “Low-level” solutions and

layers
X.org - KDrive
▶ Stand-alone simplified version of the X server, for embedded

systems
▶ Formerly know as Tiny-X
▶ Kdrive is integrated in the official X.org server
▶ Works on top of the Linux frame buffer, thanks to the Xfbdev
variant of the server
▶ Real X server
▶ Fully supports the X11 protocol: drawing, input event handling,
etc.
▶ Allows to use any existing X11 application or library
▶ Actively developed and maintained.
▶ X11 license
▶ https://www.x.org
Kdrive: architecture
Kdrive: usage
▶ Can be directly programmed using Xlib / XCB

▶ Low-level graphic library, rarely used
▶ Or, usually used with a toolkit on top of it
▶ Gtk
▶ Qt
▶ Enlightenment Foundation Libraries
▶ Others: Fltk, WxEmbedded, etc
Wayland
▶ Intended to be a simpler replacement for X

▶ Wayland is a protocol for a compositor to talk to its clients as
well as a C library implementation of that protocol.
▶ Weston: a minimal and fast reference implementation of a
Wayland compositor, and is suitable for many embedded and
mobile use cases.
▶ Not fully deployed yet. However, the ports of Gtk and Qt to
Wayland are complete.
▶ https://wayland.freedesktop.org/
Wayland: architecture
Graphical toolkits: “High-level” solutions
Gtk
▶ The famous toolkit, providing widget-based high-level APIs to

develop graphical applications
▶ Standard API in C, but bindings exist for various languages:
C++, Python, etc.
▶ Works on top of X.org and Wayland.
▶ No windowing system, a lightweight window manager needed to
run several applications. Possible solution: Matchbox.
▶ License: LGPL
▶ Multiplatform: Linux, MacOS, Windows.
▶ https://www.gtk.org
Gtk stack components
▶ Glib, core infrastructure

▶ Object-oriented infrastructure GObject
▶ Event loop, threads, asynchronous queues, plug-ins, memory allocation, I/O
channels, string utilities, timers, date and time, internationalization, simple XML
parser, regular expressions
▶ Data types: memory slices and chunks, linked lists, arrays, trees, hash tables, etc.
▶ Pango, internationalization of text handling
▶ ATK, accessibility toolkit
▶ Cairo, vector graphics library
▶ Gtk+, the widget library itself
▶ The Gtk stack is a complete framework to develop applications
Gtk example
Maemo tablet / phone interface

GTK is losing traction, however: Mer, the descendent of Maemo, is now implemented
in EFL (see next slides).
Qt (1)
▶ The other famous toolkit, providing widget-based high-level APIs to develop

graphical applications
▶ Implemented in C++
▶ the C++ library is required on the target system
▶ standard API in C++, but with bindings for other languages
▶ Works either on top of
▶ Framebuffer
▶ X11
▶ Wayland
▶ Multiplatform: Linux, MacOS, Windows.
Qt (2)
▶ Qt is more than just a graphical toolkit, it also offers a complete development

framework: data structures, threads, network, databases, XML, etc.
▶ See our presentation Qt for non graphical applications presentation at ELCE 2011
(Thomas Petazzoni): https://j.mp/W4PK85
▶ Qt Embedded has an integrated windowing system, allowing several applications
to share the same screen
▶ Very well documented
▶ Since version 4.5, available under the LGPL, allowing proprietary applications
▶ Since version 4.7, LGPL v2 is dropped, leaving LGPLv3 and GPLv3 (and GPLv2
for some parts) as only options, which add more restrictions to proprietary
applications.
Qt’s usage
Source: https://www.qt.io/qt-for-device-creation/
Other less frequent solutions
▶ Enlightenment Foundation Libraries (EFL)

▶ Very powerful. Supported by Samsung, Intel and Free.fr.
▶ Work on top of X or Wayland.
▶ https://www.enlightenment.org/about-efl
Tools for the target device: Databases
Lightweight database - SQLite
https://www.sqlite.org
▶ SQLite is a small C library that implements a self-contained, embeddable,
lightweight, zero-configuration SQL database engine
▶ The database engine of choice for embedded Linux systems
▶ Can be used as a normal library
▶ Can be directly embedded into a application, even a proprietary one since SQLite is
released in the public domain
Tools for the target device: Web browsers
WebKit
https://webkit.org/
▶ Web browser engine. Application framework that can be used to
develop web browsers.
▶ License: portions in LGPL and others in BSD. Proprietary
applications allowed.
▶ Used by many web browsers: Safari, iPhone and Android default
browsers ... Google Chrome now uses a fork of its WebCore
component). Used by e-mail clients too to render HTML.
▶ Multiple graphical back-ends: Qt4, GTK, EFL...
▶ You could use it to create your custom browser.
System building
System building: goal and solutions
▶ Goal
▶ Integrate all the software components, both
third-party and in-house, into a working root
filesystem
▶ It involves the download, extraction,
configuration, compilation and installation of
all components, and possibly fixing issues and
adapting configuration files
▶ Several solutions
▶ Manually
▶ System building tools
▶ Distributions or ready-made filesystems
Penguin picture: https://bit.ly/1PwDklz
System building: manually
▶ Manually building a target system involves downloading, configuring, compiling

and installing all the components of the system.
▶ All the libraries and dependencies must be configured, compiled and installed in
the right order.
▶ Sometimes, the build system used by libraries or applications is not very
cross-compile friendly, so some adaptations are necessary.
▶ There is no infrastructure to reproduce the build from scratch, which might cause
problems if one component needs to be changed, if somebody else takes over the
project, etc.
System building: manually (2)
▶ Manual system building is not recommended for production projects

▶ However, using automated tools often requires the developer to dig into specific
issues
▶ Having a basic understanding of how a system can be built manually is therefore
very useful to fix issues encountered with automated tools
▶ We will first study manual system building, and during a practical lab, create a
system using this method
▶ Then, we will study the automated tools available, and use one of them during a lab
System foundations
▶ A basic root file system needs at least

▶ A traditional directory hierarchy, with /bin, /etc, /lib, /root, /usr/bin,
/usr/lib, /usr/share, /usr/sbin, /var, /sbin
▶ A set of basic utilities, providing at least the init program, a shell and other
traditional UNIX command line tools. This is usually provided by Busybox
▶ The C library and the related libraries (thread, math, etc.) installed in /lib
▶ A few configuration files, such as /etc/inittab, and initialization scripts in
/etc/init.d
▶ On top of this foundation common to most embedded Linux system, we can add
third-party or in-house components
Target and build spaces
▶ The system foundation, Busybox and C library, are the core of the target root
filesystem
▶ However, when building other components, one must distinguish two directories
▶ The target space, which contains the target root filesystem, everything that is
needed for execution of the application
▶ The build space, which will contain a lot more files than the target space, since it is
used to keep everything needed to compile libraries and applications. So we must
keep the headers, documentation, and other configuration files
Build systems
Each open-source component comes with a mechanism to configure, compile and

install it
▶ A basic Makefile
▶ Need to read the Makefile to understand how it works and how to tweak it for
cross-compilation
▶ A build system based on the Autotools
▶ As this is the most common build system, we will study it in details
▶ CMake, https://cmake.org/
▶ Newer and simpler than the autotools. Used by (sometimes large) projects such as
KDE, KiCad, LLVM / Clang, Scribus, OpenCV. Used by Netflix too.
▶ Scons, https://www.scons.org/
▶ Waf, https://github.com/waf-project/waf
▶ Other manual build systems
Autotools and friends
▶ A family of tools, which associated together form a complete and extensible build
system
▶ autoconf is used to handle the configuration of the software package
▶ automake is used to generate the Makefiles needed to build the software package
▶ pkgconfig is used to ease compilation against already installed shared libraries
▶ libtool is used to handle the generation of shared libraries in a system-independent
way
▶ Most of these tools are old and relatively complicated to use, but they are used by
a majority of free software packages today. One must have a basic understanding
of what they do and how they work.
automake / autoconf / autoheader
automake / autoconf
▶ Files written by the developer

▶ configure.in describes the configuration options and the checks done at configure
time
▶ Makefile.am describes how the software should be built
▶ The configure script and the Makefile.in files are generated by autoconf and
automake respectively.
▶ They should never be modified directly
▶ They are usually shipped pre-generated in the software package, because there are
several versions of autoconf and automake, and they are not completely compatible
▶ The Makefile files are generated at configure time, before compiling
▶ They are never shipped in the software package.
Configuring and compiling: native case
▶ The traditional steps to configure and compile an autotools based package are
▶ Configuration of the package
./configure
▶ Compilation of the package
make
▶ Installation of the package
make install
▶ Additional arguments can be passed to the ./configure script to adjust the
component configuration (run ./configure --help)
▶ Only the make install needs to be done as root if the installation should take
place system-wide
Configuring and compiling: cross case (1)
▶ For cross-compilation, things are a little bit more complicated.

▶ At least some of the environment variables AR, AS, LD, NM, CC, GCC, CPP, CXX,
STRIP, OBJCOPY must be defined to point to the proper cross-compilation tools.
The host tuple is also by default used as prefix.
▶ configure script arguments:
▶ --host: mandatory but a bit confusing. Corresponds to the target platform the
code will run on. Example: --host=arm-linux
▶ --build: build system. Automatically detected.
▶ --target is only for tools generating code.
▶ It is recommended to pass the --prefix argument. It defines from which location
the software will run in the target environment. We recommend /usr instead of
the default setting (/usr/local).
Configuring and compiling: cross case (2)
▶ If one simply runs make install, the software will be installed in the directory
passed as --prefix. For cross-compiling, one must pass the DESTDIR argument
to specify where the software must be installed.
▶ Making the distinction between the prefix (as passed with --prefix at configure
time) and the destination directory (as passed with DESTDIR at installation time)
is very important.
▶ Example:
export PATH=/usr/local/arm-linux/bin:$PATH
export CC=arm-linux-gcc
export STRIP=arm-linux-strip
./configure --host=arm-linux --prefix=/usr
make
make DESTDIR=$HOME/work/rootfs install
Installation (1)
▶ The autotools based software packages provide both a install and

install-strip make targets, used to install the software, either stripped or
unstripped.
▶ For applications, the software is usually installed in <prefix>/bin, with
configuration files in <prefix>/etc and data in
<prefix>/share/<application>/
▶ The case of libraries is a little more complicated:
▶ In <prefix>/lib, the library itself (a .so.<version>), a few symbolic links, and the
libtool description file (a .la file)
▶ The pkgconfig description file in <prefix>/lib/pkgconfig
▶ Include files in <prefix>/include/
▶ Sometimes a <libname>-config program in <prefix>/bin
▶ Documentation in <prefix>/share/man or <prefix>/share/doc/
Installation (2)
Contents of usr/lib after installation of libpng and zlib
▶ libpng libtool description files
./lib/libpng12.la
./lib/libpng.la -> libpng12.la
▶ libpng static version
./lib/libpng12.a
./lib/libpng.a -> libpng12.a
▶ libpng dynamic version
./lib/libpng.so.3.32.0
./lib/libpng12.so.0.32.0
./lib/libpng12.so.0 -> libpng12.so.0.32.0
./lib/libpng12.so -> libpng12.so.0.32.0
./lib/libpng.so -> libpng12.so
./lib/libpng.so.3 -> libpng.so.3.32.0
▶ libpng pkg-config description files
./lib/pkgconfig/libpng12.pc
./lib/pkgconfig/libpng.pc -> libpng12.pc
▶ zlib dynamic version
./lib/libz.so.1.2.3
./lib/libz.so -> libz.so.1.2.3
./lib/libz.so.1 -> libz.so.1.2.3
Installation in the build and target spaces
▶ From all these files, everything except documentation is necessary to build an

application that relies on libpng.
▶ These files will go into the build space
▶ However, only the library .so binaries in <prefix>/lib and some symbolic links
are needed to execute the application on the target.
▶ Only these files will go in the target space
▶ The build space must be kept in order to build other applications or recompile
existing applications.
pkg-config
▶ pkg-config is a tool that allows to query a small database to get information on

how to compile programs that depend on libraries
▶ The database is made of .pc files, installed by default in
<prefix>/lib/pkgconfig/.
▶ pkg-config is used by the configure script to get the library configurations
▶ It can also be used manually to compile an application:
arm-linux-gcc -o test test.c $(pkg-config --libs --cflags thelib)
▶ By default, pkg-config looks in /usr/lib/pkgconfig for the *.pc files, and
assumes that the paths in these files are correct.
▶ PKG_CONFIG_LIBDIR allows to set another location for the *.pc files and
PKG_CONFIG_SYSROOT_DIR to prepend a prefix to the paths mentioned in the .pc
files.
Let’s find the libraries
▶ When compiling an application or a library that relies on other libraries, the build
process by default looks in /usr/lib for libraries and /usr/include for headers.
▶ The first thing to do is to set the CFLAGS and LDFLAGS environment variables:
export CFLAGS=-I/my/build/space/usr/include/
export LDFLAGS=-L/my/build/space/usr/lib
▶ The libtool files (.la files) must be modified because they include the absolute
paths of the libraries:
- libdir='/usr/lib'
+ libdir='/my/build/space/usr/lib’
▶ The PKG_CONFIG_LIBDIR environment variable must be set to the location of the
.pc files and the PKG_CONFIG_SYSROOT_DIR variable must be set to the build space
directory.
Further details about autotools
See our ”Demystification tutorial” about the GNU Autotools (Thomas Petazzoni,
2016)
▶ Presentation slides: https://bit.ly/2hjpojv
▶ Video: https://youtu.be/_zX8LJ9Xjyk
Practical lab - Third party libraries and applications
▶ Manually cross-compiling applications and

libraries
▶ Learning about common techniques and issues.
▶ Compile and run an audio player application!
System building tools: principle
▶ Different tools are available to automate the process of building a target system,
including the kernel, and sometimes the toolchain.
▶ They automatically download, configure, compile and install all the components in
the right order, sometimes after applying patches to fix cross-compiling issues.
▶ They already contain a large number of packages, that should fit your main
requirements, and are easily extensible.
▶ The build becomes reproducible, which allows to easily change the configuration
of some components, upgrade them, fix bugs, etc.
Available system building tools
Large choice of tools

▶ Buildroot, developed by the community
https://buildroot.org
See our dedicated course and training materials:
https://bootlin.com/training/buildroot/
▶ PTXdist, developed by Pengutronix
https://www.ptxdist.org
▶ OpenWRT, originally a fork of Buildroot for wireless routers, now a more generic project
https://openwrt.org
▶ OpenEmbedded, more flexible but also far more complicated
http://www.openembedded.org, its industrialized version Yocto Project and
vendor-specific derivatives such as Arago.
See our dedicated course and training materials:
https://bootlin.com/training/yocto/.
Buildroot (1)
▶ Allows to build a toolchain, a root filesystem image with many applications and
libraries, a bootloader and a kernel image
▶ Or any combination of the previous items
▶ Supports building uClibc, glibc and musl toolchains, either built by Buildroot, or
external
▶ Over 2000+ applications or libraries integrated, from basic utilities to more
elaborate software stacks: X.org, GStreamer, Qt, Gtk, WebKit, Python, PHP, etc.
▶ Good for small to medium embedded systems, with a fixed set of features
▶ No support for generating packages (.deb or .ipk)
▶ Needs complete rebuild for most configuration changes.
▶ Active community, releases published every 3 months.
Buildroot (2)
▶ Configuration takes place through a *config

interface similar to the kernel
make menuconfig
▶ Allows to define
▶ Architecture and specific CPU
▶ Toolchain configuration
▶ Set of applications and libraries to integrate
▶ Filesystem images to generate
▶ Kernel and bootloader configuration
▶ Build by just running
make
Buildroot: adding a new package (1)
▶ A package allows to integrate a user application or library to Buildroot

▶ Each package has its own directory (such as package/gqview). This directory
contains:
▶ A Config.in file (mandatory), describing the configuration options for the package.
At least one is needed to enable the package. This file must be sourced from
package/Config.in
▶ A gqview.mk file (mandatory), describing how the package is built.
▶ A .hash file (optional, but recommended), containing hashes for the files to
download.
▶ Patches (optional). Each file of the form *.patch will be applied as a patch.
Buildroot: adding a new package (2)
▶ For a simple package with a single configuration option to enable/disable it, the
Config.in file looks like:
config BR2_PACKAGE_GQVIEW
bool "gqview"
depends on BR2_PACKAGE_LIBGTK2
help
GQview is an image viewer for UNIX operating systems
http://prdownloads.sourceforge.net/gqview
▶ It must be sourced from package/Config.in:
source "package/gqview/Config.in"
Buildroot: adding new package (3)
▶ Create the gqview.mk file to describe the build steps
GQVIEW_VERSION = 2.1.5
GQVIEW_SOURCE = gqview-$(GQVIEW_VERSION).tar.gz
GQVIEW_SITE = http://prdownloads.sourceforge.net/gqview
GQVIEW_DEPENDENCIES = host-pkgconf libgtk2
GQVIEW_CONF_ENV = LIBS="-lm"
GQVIEW_LICENSE = GPL-2.0
GQVIEW_LICENSE_FILES = COPYING
$(eval $(autotools-package))
▶ The package directory and the prefix of all variables must be identical to the suffix
of the main configuration option BR2_PACKAGE_GQVIEW
▶ The autotools-package infrastructure knows how to build autotools packages.
A more generic generic-package infrastructure is available for packages not
using the autotools as their build system.
OpenEmbedded / Yocto Project
▶ The most versatile and powerful embedded Linux build system

▶ A collection of recipes (.bb files)
▶ A tool that processes the recipes: bitbake
▶ Integrates 2000+ application and libraries, is highly configurable, can generate
binary packages to make the system customizable, supports multiple
versions/variants of the same package, no need for full rebuild when the
configuration is changed.
▶ Configuration takes place by editing various configuration files
▶ Good for larger embedded Linux systems, or people looking for more
configurability and extensibility
▶ Drawbacks: very steep learning curve, very long first build.
Distributions - Debian
Debian GNU/Linux, https://www.debian.org

▶ Provides the easiest environment for quickly building prototypes and
developing applications. Countless runtime and development packages
available.
▶ But probably too costly to maintain and unnecessarily big for
production systems.
▶ Available on multiple architectures: ARM (armel, armhf, arm64),
MIPS, PowerPC, RiscV (in progress)...
▶ Software is compiled natively by default.
▶ Use the debootstrap command to build a root filesystem for your
architecture, with a custom selection of packages.
Distributions - Others
Fedora
▶ https:
//fedoraproject.org/wiki/Architectures/ARM
Image credits: https://bit.ly/2EzmJLF
▶ Supported on various recent ARM boards (such as
Beaglebone Black and Raspberry Pi)
▶ Supports QEMU emulated ARM boards too (Versatile
Express board)
▶ Shipping the same version as for desktops!
Embedded distributions
Even if you don’t use them for final products, they can be useful to make demos quickly
▶ Android: https://www.android.com/
Google’s distribution for phones, tablets, TVs, cars...
Except the Linux kernel, very different user space than other Linux
distributions. Very successful, lots of applications available (many
proprietary).
▶ Alpine Linux: https://www.alpinelinux.org/
Security oriented distribution based on Musl and BusyBox, fitting in
about 130 MB of storage, supporting x86 and arm, both 32 and 64 bit.
Application frameworks
Not real distributions you can download. Instead, they implement

middleware running on top of the Linux kernel and allowing to develop
applications.
▶ Mer: http://merproject.org/
Fork from the Meego project.
Targeting mobile devices.
Supports x86, ARM and MIPS.
See
https://en.wikipedia.org/wiki/Mer_(software_distribution)
▶ Tizen: https://www.tizen.org/
Targeting smartphones, tablets, netbooks, smart TVs and In Vehicle
Infotainment devices.
Supported by big phone manufacturers and operators
HTML5 base application framework.
See https://en.wikipedia.org/wiki/Tizen
Practical lab - Buildroot
▶ Rebuild the same system, this time with

Buildroot.
▶ See how easier it gets!
Embedded Linux application development
Embedded Linux
application development

Contents
▶ Application development
▶ Developing applications on embedded Linux
▶ Building your applications
▶ Source management
▶ Integrated development environments (IDEs)
▶ Version control systems
▶ Debugging and analysis tools
▶ Debuggers
▶ Memory checkers
▶ System analysis
Developing applications on embedded Linux
Application development
▶ An embedded Linux system is just a normal Linux system, with usually a smaller
selection of components
▶ In terms of application development, developing on embedded Linux is exactly the
same as developing on a desktop Linux system
▶ All existing skills can be re-used, without any particular adaptation
▶ All existing libraries, either third-party or in-house, can be integrated into the
embedded Linux system
▶ Taking into account, of course, the limitation of the embedded systems in terms of
performance, storage and memory
▶ Application development could start on x86, even before the hardware is available.
Programming language
▶ The default programming language for system-level application in Linux is usually

C
▶ The C library is already present on your system, nothing to add
▶ C++ can be used for larger applications
▶ The C++ library must be added to the system
▶ Some libraries, including Qt, are developed in C++ so they need the C++ library on
the system anyway
▶ Scripting languages can also be useful for quick application development, web
applications or scripts
▶ But they require an interpreter on the embedded system and have usually higher
memory consumption and slightly lower performance
▶ Most popular: Python, shell
▶ All programming languages can be used: Lua, Ada, Java, Rust...
C library or higher-level libraries?
▶ For many applications, the C library already provides a relatively large set of
features
▶ file and device I/O, networking, threads and synchronization, inter-process
communication
▶ Thoroughly described in the glibc manual, or in any Linux system programming book
▶ However, the API carries a lot of history and is not necessarily easy to grasp for new
comers
▶ Therefore, using a higher level framework, such as Qt or the Gtk/Glib stack,
might be a good idea
▶ These frameworks are not only graphical libraries, their core is separate from the
graphical part
▶ But of course, these libraries have some memory and storage footprint, in the order
of a few megabytes
Building your applications
▶ For simple applications that do not need to be really portable or provide

compile-time configuration options, a simple Makefile will be sufficient
▶ For more complicated applications, or if you want to be able to run your
application on a desktop Linux PC and on the target device, using a build system
is recommended
▶ autotools is ancient, complicated but very widely used.
▶ We recommend to invest in CMake instead: modern, simpler, smaller but growing
user base.
▶ The QT library is a special case, since it comes with its own build system for
applications, called qmake.
Simple Makefile (1)
Case of an application that only uses the C library, contains two source files and
CROSS_COMPILE?=arm-linux-
CC=$(CROSS_COMPILE)gcc
OBJS=foo.o bar.o
all: foobar
foobar: $(OBJS)
Tab $(CC) -o $@ $^
clean:
Tab $(RM) -f foobar $(OBJS)
generates a single binary
Simple Makefile (2)
Case of an application that uses the Glib and the GPS libraries
CROSS_COMPILE?=arm-linux-
LIBS=libgps glib-2.0
OBJS=foo.o bar.o
CC=$(CROSS_COMPILE)gcc
CFLAGS=$(shell pkg-config --cflags $(LIBS))
LDFLAGS=$(shell pkg-config --libs $(LIBS))
all: foobar
foobar: $(OBJS)
Tab $(CC) -o $@ $^ $(LDFLAGS)
clean:
Tab $(RM) -f foobar $(OBJS)
Integrated Development Environments (IDE)
Visual Studio Code
https://code.visualstudio.com/
▶ Created by Microsoft
▶ License: MIT
▶ Extensible, language agnostic text editor
▶ Built-in git commands
▶ The most popular IDE (open-source and proprietary)
according Stack Overflow’s 2019 survey
▶ Try it on Ubuntu: sudo snap install --classic code
▶ https://en.wikipedia.org/wiki/Visual_Studio_Code
Image credits (Wikipedia):

https://frama.link/RjFqWGBS
Eclipse (1)
https://www.eclipse.org/
▶ An extensible, plug-in based software development kit, typically
used for creating IDEs.
▶ Supported by the Eclipse foundation, a non-profit consortium of image credits:
https://bit.ly/2Hntsvf
major software industry vendors (IBM, Intel, Borland, Nokia,
Wind River, Zend, Computer Associates...).
▶ Free Software license (Eclipse Public License). Incompatible with
the GPL.
▶ Supported platforms: GNU/Linux, UNIX, Windows
Extremely popular: created a lot of attraction.
Eclipse (2)
▶ Eclipse is actually a platform composed of many projects:

https://www.eclipse.org/projects/
▶ Some projects are dedicated to integrating into Eclipse features useful for embedded
developers (cross-compilation, remote development, remote debugging, etc.)
▶ The platform is used by major embedded Linux software vendors for their
(proprietary) system development kits: MontaVista DevRocket, TimeSys
TimeStorm, Wind River Workbench, Sysgo ELinOS.
▶ Used by free software build systems and development environments too, such as
Yocto Project and Buildroot.
Eclipse is a huge project. It would require an entire training session!
Other popular solutions
Vim
▶ Many embedded Linux developers simply use
Vim or Emacs. They can integrate with
debuggers, source code browsers such as
cscope, offer syntax highlighting and more.
▶ People also use QtCreator, even for non Qt
projects
▶ Atom is a very popular text editor too
▶ See Stack Overflow’s survey of most popular Emacs
IDEs (2019): https://frama.link/bfPgbb88
All these tools are available in most Linux
distributions, simply install them and try them out!
Version control systems
Version control systems
Real projects can’t do without them

▶ Allow multiple developers to contribute on the same project. Each developer can
see the latest changes from the others, or choose to stick with older versions of
some components.
▶ Allow to keep track of changes, and revert them if needed.
▶ Allow developers to have their own development branch (branching)
▶ Supposed to help developers resolving conflicts with different branches (merging)
Traditional version control systems
Rely on a central repository. Subversion is the last popular open-source one:

▶ https://subversion.apache.org/
▶ Created as a replacement of the old CVS, removing many of its limitations.
▶ Commits on several files, proper renaming support, better performance, etc.
▶ The user interface is very similar to CVS
▶ https://en.wikipedia.org/wiki/Subversion_(software)
No longer recommended for new projects. Use distributed source control systems
instead!
Distributed source control systems (1)
No longer have a central repository

▶ More adapted to the way the Free Software community develops software and
organizes
▶ Allows each developer to have a full local history of the project, to create local
branches. Makes each developer’s work easier.
▶ People get working copies from other people’s working copies, and exchange
changes between themselves. Branching and merging is made easier.
▶ Make it easier for new developers to join, making their own experiments without
having to apply for repository access.
Distributed source control systems (2)
▶ Git
▶ Initially designed and developed by Linus Torvalds for Linux kernel development
▶ Extremely popular in the community, and used by more and more projects (kernel,
U-Boot, Barebox, uClibc, GNOME, X.org, etc.)
▶ Outstanding performance, in particular in big projects
▶ https://en.wikipedia.org/wiki/Git_(software)
▶ Mercurial
▶ Another system, created with the same goals as Git.
▶ Used by some big projects too
▶ https://en.wikipedia.org/wiki/Mercurial
https://en.wikipedia.org/wiki/Version_control_systems#Distributed_
revision_control
Debuggers
GDB
The GNU Project Debugger

https://www.gnu.org/software/gdb/
▶ The debugger on GNU/Linux, available for most embedded
architectures.
▶ Supported languages: C, C++, Pascal, Objective-C, Fortran,
Ada...
▶ Console interface (useful for remote debugging).
▶ Graphical front-ends available.
▶ Can be used to control the execution of a program, set
breakpoints or change internal variables. You can also use it to
see what a program was doing when it crashed (by loading its
memory image, dumped into a core file).
See also https://en.wikipedia.org/wiki/Gdb
GDB crash course
A few useful GDB commands
▶ break foobar
puts a breakpoint at the entry of function foobar()
▶ break foobar.c:42
puts a breakpoint in foobar.c, line 42
▶ print var or print task->files[0].fd
prints the variable var, or a more complicated reference. GDB can also nicely
display structures with all their members
▶ continue
continue the execution
▶ next
continue to the next line, stepping over function calls
▶ step
continue to the next line, entering into subfunctions
▶ backtrace
display the program stack
GDB graphical front-ends
▶ DDD - Data Display Debugger

https://www.gnu.org/software/ddd/
A popular graphical front-end, with advanced data plotting capabilities.
▶ GDB/Insight
https://sourceware.org/insight/
From the GDB maintainers.
▶ KDbg
http://www.kdbg.org/
Another front-end, for the K Display Environment.
▶ Integration with other IDEs: Eclipse, Emacs, KDevelop, etc.
Remote debugging
Remote debugging
▶ In a non-embedded environment, debugging takes place using gdb or one of its

front-ends.
▶ gdb has direct access to the binary and libraries compiled with debugging symbols.
▶ However, in an embedded context, the target platform environment is often too
limited to allow direct debugging with gdb (2.4 MB on x86).
▶ Remote debugging is preferred
▶ ARCH-linux-gdb is used on the development workstation, offering all its features.
▶ gdbserver is used on the target system (only 100 KB on arm).
ARCH-linux-gdb
gdbserver
Remote debugging: architecture
Remote debugging: usage
▶ On the target, run a program through gdbserver.

Program execution will not start immediately.
gdbserver localhost:<port> <executable> <args>
gdbserver /dev/ttyS0 <executable> <args>
▶ Otherwise, attach gdbserver to an already running program:
gdbserver --attach localhost:<port> <pid>
▶ Then, on the host, start ARCH-linux-gdb <executable>,
and use the following gdb commands:
▶ To connect to the target:
gdb> target remote <ip-addr>:<port> (networking)
gdb> target remote /dev/ttyS0 (serial link)
▶ To tell gdb where shared libraries are:
gdb> set sysroot <library-path> (without lib/)
Post mortem analysis
▶ When an application crashes due to a segmentation fault and the application was
not under control of a debugger, we get no information about the crash
▶ Fortunately, Linux can generate a core file that contains the image of the
application memory at the moment of the crash, and gdb can use this core file to
let us analyze the state of the crashed application
▶ On the target
▶ Use ulimit -c unlimited to enable the generation of a core file when a crash
occurs
▶ On the host
▶ After the crash, transfer the core file from the target to the host, and run
ARCH-linux-gdb -c core-file application-binary
Memory checkers
Valgrind (1)
https://valgrind.org/
▶ GNU GPL Software suite for debugging and profiling programs.
▶ Supported platforms: Linux on x86, x86_64, arm (armv7 only),
arm64, mips32, s390, ppc32 and ppc64. Also supported on other
operating systems (Android, Darwin, Illumos, Solaris...)
▶ Can detect many memory management and threading bugs.
▶ Profiler: provides information helpful to speed up your program
and reduce its memory usage.
▶ The most popular tool for this usage. Even used by projects with
hundreds of programmers.
Valgrind (2)
▶ Can be used to run any program, without the need to recompile

it.
▶ Example usage
valgrind --leak-check=yes ls -la
▶ Works by adding its own instrumentation to your code and then
running in on its own virtual cpu core.
Significantly slows down execution, but still fine for testing!
▶ More details on https://valgrind.org/info/ and
https://valgrind.org/docs/manual/coregrind_core.html
System analysis
strace
System call tracer
https://sourceforge.net/projects/strace/
▶ Available on all GNU/Linux systems
Can be built by your cross-compiling toolchain generator.
▶ Even easier: drop a ready-made static binary for your architecture, just when you
need it. See
https://github.com/bootlin/static-binaries/tree/master/strace
▶ Allows to see what any of your processes is doing:
accessing files, allocating memory...
Often sufficient to find simple bugs.
▶ Usage:
strace <command> (starting a new process)
strace -p <pid> (tracing an existing process) strace -c <command> (statistics
of system calls taking most time)
See man strace for details.
strace example output
> strace cat Makefile

execve("/bin/cat", ["cat", "Makefile"], [/* 38 vars */]) = 0
brk(0) = 0x98b4000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f85000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=111585, ...}) = 0
mmap2(NULL, 111585, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f69000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/tls/i686/cmov/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\320h\1\0004\0\0\0\344"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1442180, ...}) = 0
mmap2(NULL, 1451632, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e06000
mprotect(0xb7f62000, 4096, PROT_NONE) = 0
mmap2(0xb7f63000, 12288, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15c) = 0xb7f63000
mmap2(0xb7f66000, 9840, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f66000
close(3) = 0
Hint: follow the open file descriptors returned by open().

strace -c example output
> strace -c cheese

% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
36.24 0.523807 19 27017 poll
28.63 0.413833 5 75287 115 ioctl
25.83 0.373267 6 63092 57321 recvmsg
3.03 0.043807 8 5527 writev
2.69 0.038865 10 3712 read
2.14 0.030927 3 10807 getpid
0.28 0.003977 1 3341 34 futex
0.21 0.002991 3 1030 269 openat
0.20 0.002889 2 1619 975 stat
0.18 0.002534 4 568 mmap
0.13 0.001851 5 356 mprotect
0.10 0.001512 2 784 close
0.08 0.001171 3 461 315 access
0.07 0.001036 2 538 fstat
...
ltrace
A tool to trace library calls used by a program and all the signals it receives
▶ Very useful complement to strace, which shows only system calls.
▶ Of course, works even if you don’t have the sources
▶ Allows to filter library calls with regular expressions, or just by a list of function
names.
▶ Manual page: https://linux.die.net/man/1/ltrace
See https://en.wikipedia.org/wiki/Ltrace for details
ltrace example output
ltrace nedit index.html

sscanf(0x8274af1, 0x8132618, 0x8248640, 0xbfaadfe8, 0) = 1
sprintf("const 0", "const %d", 0) = 7
strcmp("startScan", "const 0") = 1
strcmp("ScanDistance", "const 0") = -1
strcmp("const 200", "const 0") = 1
strcmp("$list_dialog_button", "const 0") = -1
strcmp("$shell_cmd_status", "const 0") = -1
strcmp("$read_status", "const 0") = -1
strcmp("$search_end", "const 0") = -1
strcmp("$string_dialog_button", "const 0") = -1
strcmp("$rangeset_list", "const 0") = -1
strcmp("$calltip_ID", "const 0") = -1
ltrace summary
Example summary at the end of the ltrace output (-c option)
Process 17019 detached
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
100.00 0.000050 50 1 set_thread_area
0.00 0.000000 0 48 read
0.00 0.000000 0 44 write
0.00 0.000000 0 80 63 open
0.00 0.000000 0 19 close
0.00 0.000000 0 1 execve
0.00 0.000000 0 2 2 access
0.00 0.000000 0 3 brk
0.00 0.000000 0 1 munmap
0.00 0.000000 0 1 uname
0.00 0.000000 0 1 mprotect
0.00 0.000000 0 19 mmap2
0.00 0.000000 0 50 46 stat64
0.00 0.000000 0 18 fstat64
------ ----------- ----------- --------- --------- ----------------
100.00 0.000050 288 111 total
OProfile
http://oprofile.sourceforge.net
▶ A system-wide profiling tool
▶ Can collect statistics like the top users of the CPU.
▶ Works without having the sources.
▶ Requires a kernel patch to access all features, but is already available in a
standard kernel.
▶ Requires more investigation to see how it works.
▶ Ubuntu/Debian packages: oprofile, oprofile-gui
Practical lab - App. development and debugging
Application development
▶ Compile your own application with the ncurses
library
Remote debugging
▶ Set up remote debugging tools on the target:
strace, ltrace
and gdbserver.
▶ Debug a simple application running on the
target using remote debugging
References
References

Books
▶ Mastering Embedded Linux, Second Edition, Packt Publishing

By Chris Simmonds, June 2017
An up-to-date resource covering most aspects of embedded Linux
development.
https://bit.ly/2A9Pb5Y
▶ Embedded Linux Primer, Second Edition, Prentice Hall
By Christopher Hallinan, October 2010
Covers a very wide range of interesting topics.
https://j.mp/17NYxBP
▶ Embedded Linux System Design and Development
P. Raghavan, A. Lad, S. Neelakandan, Auerbach, Dec. 2005. Very good
coverage of the POSIX programming API (still up to date).
https://j.mp/19X8iu2
Web sites
▶ ELinux.org, https://elinux.org, a Wiki entirely dedicated to embedded Linux.

Lots of topics covered: real-time, filesystem, multimedia, tools, hardware
platforms, etc. Interesting to explore to discover new things.
▶ LWN, https://lwn.net, very interesting news site about Linux in general, and
specifically about the kernel. Weekly edition, available for free after one week for
non-paying visitors.
▶ Linux Gizmos, https://linuxgizmos.com, a news site about embedded Linux,
mainly oriented on hardware platforms related news.
International conferences
Useful conferences featuring embedded Linux and kernel topics
▶ Embedded Linux Conference:

https://embeddedlinuxconference.com/
Organized by the Linux Foundation: USA (February-April), in Europe
(October-November). Very interesting kernel and user space topics for embedded
systems developers. Presentation slides and videos freely available
▶ Linux Plumbers, https://linuxplumbersconf.org
Conference on the low-level plumbing of Linux: kernel, audio, power management,
device management, multimedia, etc.
▶ FOSDEM: https://fosdem.org (Brussels, February)
For developers. Presentations about system development.
Last slides
Last slides

Last slide
Thank you!
And may the Source be with you

Embedded Linux 4d Slides PDF

Uploaded by

Copyright:

Available Formats

Embedded Linux 4d Slides PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Embedded Linux 4d Slides PDF

Uploaded by

Copyright:

Available Formats

Embedded Linux system development

Embedded Linux system

© Copyright 2004-2020, Bootlin.

Document updates and sources:

© Copyright 2004-2020, Bootlin

Document sources: https://github.com/bootlin/training-materials/

There are many hyperlinks in the document

▶ All our training materials and technical

© Copyright 2004-2020, Bootlin.

Using STMicroelectronics STM32MP157A-DK1 Discovery boards in all practical labs

Board and CPU documentation, design files, software:

▶ STMicroelectronics STM32MP157A-DK1 Discovery kit - Available

During the lectures...

During practical labs...

in later labs. Cross-compiling kernel:

▶ That’s particular useful to keep kernel Making ubifs images:

▶ Also useful to get help from the instructor, Encountered issues:

▶ This memento sheet gives command examples

▶ The vi editor is very useful to make quick

© Copyright 2004-2020, Bootlin.

▶ 1983, Richard Stallman, GNU project and the free

▶ 2010, Linux is more and more popular on phones

Embedded Linux is the usage of the Linux

Advantages of Linux and open-source for

▶ Many open-source components are widely used, on millions of systems

▶ Open-source being freely available, it is easy to get a piece of software and

▶ Open-source software components are developed by communities of developers

▶ Possibility of taking part into the development community of some of the

A few examples of embedded systems running

Image credits: Evan Amos (https://bit.ly/2JzDIkv)

Image credits: https://bit.ly/2HbwyVq

Product from BLOKS (http://bloks.de).

eduMIP robot (https://www.ucsdrobotics.org/edumip)

Embedded hardware for Linux systems

▶ Evaluation platforms from the SoC vendor. Usually

▶ Community development platforms, to make a particular SoC popular and

Embedded Linux system architecture

© Copyright 2004-2020, Bootlin.

▶ Two ways to switch to embedded Linux

▶ Any good and sufficiently recent Linux desktop

▶ Linux is a multi-user operating system

Instructions for Debian based GNU/Linux systems

▶ To install a given package:

Further details on package management:

▶ When doing embedded development, there is always a split between

▶ An essential tool for embedded development is a serial line communication

Prepare your lab environment

© Copyright 2004-2020, Bootlin.

Definition and Components

▶ The usual development tools available on a GNU/Linux workstation is a native

▶ Three machines must be distinguished when discussing toolchain creation

▶ The C library and compiled programs needs to

▶ System call numbers, in <asm/unistd.h>

▶ The kernel to user space ABI is backward compatible

▶ GCC: GNU Compiler Collection, the famous free software

▶ The C library is an essential component of a

▶ Provides the well-known standard C API to

ease application development

▶ Several C libraries are available: glibc, uClibc, I/O