SERIES C80/C89

C70/C74

CRYOGENIC SERIES VALVES

 SERIES C80/C89 & C70/C74 CRYOGENIC BALL VALVE

OVERVIEW:
Valves designed for extreme low
temperatures incorporating
extended bonnets to ensure
stem sealing integrity.

Integral ISO 5211 mounting pad

for mounting actuators and
other accessories. A lockable
handle that keeps valves
from being opened or closed
accidentally.

An extended bonnet
and stem that distances
the stem seals from the
cryogenic fluids and
prevents them from seizing.

A one-piece cast bonnet

without any welding or
soldering, with the extension
length in accordance with
BS 6364 and wall thickness
complying to ASME B16.34.

Stem to ball contact area is

wider and larger, allowing the
valve to be used for higher
torque applications.

Special seat materials for

extreme low temperature
fluids, highly polished ball
and internals that ensure
valve sealing capabilities.

A variety of ends; threaded,

socket weld, butt-weld, tube
end, flanged Class 150 and
300, raised and flat faced.

2 Smith-Cooper International • Toll Free (800) 766-0076 • Fax (323) 890-4456 • www.smithcooper.com
 SERIES C80/C89 & C70/C74 CRYOGENIC BALL VALVE

Sharpe® cryogenic valves

DESIGN:
offered in the following series: The exceptional capabilities and superiority
Series C89 3-piece Full Port of Sharpe® cryogenic valves are highlighted
in threaded, socket weld, butt-weld and in the demanding requirements of cryogenic
other ends
applications. Continuous operation and sealing
Series C80 3-piece Standard Port
in threaded, socket weld, butt-weld and at temperatures down to -4000F require special
other ends attention to design, manufacturing and assembly.
Series C70 2-piece Flanged Full Port
Class 150 and 300
Series C74 1-piece Flanged Standard
Port Class 150 and 300
All in 316 Stainless Steel

Extension Bonnet
The cryogenic extension bonnet
is securely bolted to the valve
mounting pad.

Visual Indication on Stem

A visual position indicator on the
top of the stem provides easy Series C70 Series C74 Series C80/C89
identification of ball position and
location of upstream vent in ball.

Blow-Out Proof Stem

The cryogenic bonnet has a one piece
blowout proof stem design which
enables in-line maintenance of the
stem seals and prevents accidental
stem release under pressure.

Stem Sealing
Increased stem sealing area for
severe service assures bubble
tight leakage in the toughest high
cycle applications.

Uni-Directional
An alignment pin between the
ball and stem assures proper
orientation of the ball.

Upstream Vented Ball

Upstream vent hole in the ball
prevents excessive body cavity
pressure build-up in closed
position due to thermal expansion.
3 Smith-Cooper International • Toll Free (800) 766-0076 • Fax (323) 890-4456 • www.smithcooper.com
 SERIES C80/C89 & C70/C74 CRYOGENIC BALL VALVE
Heavy Duty Stem Design
Stem diameters have been increased to meet the
higher torque requirements of the most demanding
FEATURES
applications.
Stem to ball contact area is wider and larger,
allowing the valve to be used for higher torque
applications.
Design allows for the use of 316 stainless steel stem
material, rather than 17-4PH, for superior corrosion
resistance.
Tongue and Groove Design
Fully encapsulated body seals, allowing ends to be
welded in-line, without time consuming and labor
intensive disassembly.
Design compensates for bolt expansion and reduces
the chance of external leakage.
Helps prevent seal ruptures in high pressure or
cryogenic applications.
Larger Bolt Design
Larger diameter body bolts to comply with Class
600 for C80/C89 Series.
Stem Sealing
Increased Stem Sealing Area
Allows for a range of sealing combinations for
severe applications and other stringent design
demands.
Live-Loaded Stem
Two pairs of concave and opposing spring washers
provide additional compensation for seal wear.
Safe Design
Blowout proof stem ensures the stem cannot be
blown out by accidental medium pressure rise.
Wear Resistance
The thrust washer is either metallic for higher
temperatures and wear resistance, or PEEK for lower
temperatures.
Anti-Static
Static build-up discharges by anti-static device in
stem or the metallic thrust washer.
ISO 5211 Top-Works Compatibility
The top-works offer compatibility for mounting a
wide range of accessories.
Sharpe® actuators and accessories may be
retrofitted on existing valves without disruption of
line integrity.
Tamper Proof Locking Device
All Sharpe® Valves come standard with a lockable
handle. The optional, Sharpe® exclusive, tamper
proof locking device cannot be removed with a lock
in place. When not being used with a lock its springs
ensure the locking device snaps into place in the open
or closed position to prevent accidental operation.
4 Smith-Cooper International • Toll Free (800) 766-0076 • Fax (323) 890-4456 • www.smithcooper.com
 SERIES C80/C89 & C70/C74 CRYOGENIC BALL VALVE

Pressure-Temperature Ratings Series C80/C89 & C70/C74

1600

1500

1400 Class 600

Series C80 - ½"-2½"
Series C89 - ¼"-2"
1300

1200

TFM®
1100

1000

900
PCTFE
Pressure (PSIG)

NOVA
800

700 Class 300

Series C80 - 3"-4"
Series C89 - 2½"-3"
RTFE

600
PTFE

Series C703
Series C743
500

400

300
Class 150
200 Series C701
Series C741

100 Thermal
Fluid

0
-450 -400 -350 -300 -250 -200 -150 -100 -50 0 50 100 150 200 250 300 350 400 450 500 550 600
Temperature (°F)
Note:
The maximum pressure/temperature ratings of the valve assemblies are limited to lowest of the body or seat material fitted.
The valve body ratings are based on ASME B16.34 rating for materials.
The graphs are based on laboratory testing and our experience in field.
The seat ratings depend on the material, design, application and function.

Sharpe® Seat Materials Applications

T - Virgin PTFE Many processes are using cryogenic gases in different sectors of the industry.
Polytetrafluoroethylene is a Fluorocarbon-based polymer.
This seating material has excellent chemical resistance Terminal Unloading Stations High Purity Cryogenic / Gas Systems
and low coefficient of friction. Its temperature range is LNG Storage and Distribution CO2 and Nitrogen Injection
-100°F to 400°F (-73°C to 204°C). Color - white. Liquid and Gaseous Oxygen For Steel
Air Separation Plants
M - TFM® PTFE Production
Dyneon TFM® PTFE is a second generation PTFE with Gas Liquefication Transfer Lines
improved chemical and heat resistant properties over first Food processing Cryogenic transportation trailers
generation PTFE and exhibits better stress recovery.
Its temperature range is -100°F to 500°F (-73°C to 260°C)
Color - white. Boiling Point of Cryogenic liquids
R - Reinforced Polytetrafluoroethylene (RTFE 15% Glass Filled).
PTFE’s mechanical properties are enhanced by adding Boiling Point Liquid Density
Gas Formula
filler material to provide improved strength, stability and F° C° (lb/ft3)
wear resistance. Its temperature range is from
Carbon Dioxide CO2 -109 -78 50.6
-320°F to 450°F (-196°C to 204°C). Color-off-white.
N - Nova Methane CH4 -258 -161 26.2
This is a Teflon base filled with glass amorphous carbon Natural Gas LNG -270 -168 26
powder and graphite. It has a lower thermal contraction-
expansion than PTFE, and is ideal for steam or thermal Oxygen O2 -297 -183 71.2
fluid applications. Its temperature range is from -50°F to Argon Ar -303 -186 87.4
550°F (-45°C to 288°C). Color - black.
Air -318 -194 57.87
K - KEL-F® (PCTFE)
PCTFE is a fluorocarbon based polymer. It offers a unique Nitrogen N2 -320 -196 50.45
combination of physical and mechanical properties non
flammability, chemical resistance, and near zero moisture Hydrogen H2 -423 -253 4.43
absorption. It has a temperature range of -400°F to 300°F
(-240°C to 177°C). Helium He -452 -269 7.82
Absolute Zero -460 -273

5 Smith-Cooper International • Toll Free (800) 766-0076 • Fax (323) 890-4456 • www.smithcooper.com
 SERIES C80/C89 & C70/C74 CRYOGENIC BALL VALVE

Parts & Materials

12.2 Series C80 Sizes ½" to 2 ½" ***
Series C89 Sizes ¼" to 2" ***
12.1
26

28 21 Series C70 Sizes ½" to 2"

Series C74 Sizes 1" to 2"
25
27 20

19
10
18

9 ITEM DESCRIPTION MATERIAL QTY.

17 1 Body 316 Stainless Steel ASTM A351 CF8M 1

2 End Piece 316 Stainless Steel ASTM A351 CF8M 1-2

24 (Weld ends are 316L)
16 3 Ball 316 Stainless Steel 1
23
15 4* Seat Kel-F® (PCTFE), Nova, RTFE, TFM®, PTFE 2

11 5* Body Seal Impregnated Graphite 1-2

14
6 Bolt/Stud A193 Gr. B8 4
13 7 Nut 300 Series Stainless Steel 4
22

CRYOGENIC EXTENSION

ITEM DESCRIPTION MATERIAL QTY.

9 Bonnet Extension 316 Stainless Steel ASTM A351 CF8M 1

10 Stem 316 Stainless Steel 1

7
11* Bearing PTFE 1
2
12.1* Thrust Bearing
5
4
Series C80/C89 Bottom PEEK 1

12.2* Thrust Bearing Top Nova 1

1 13* Stem Packing -

Bottom PTFE, TFM®, Nova 1

3 14* Stem Packing -

Middle PTFE, TFM®, Nova 3-4
4 15* Stem Packing - Top PTFE, TFM®, Nova 1
5
16 Gland 300 Series Stainless Steel 1-2
2
17* Belleville Washer 300 Series Stainless Steel 4
6 18 Packing Nut 300 Series Stainless Steel 1

19 Lock Tab 300 Series Stainless Steel 1

Series C70 20 Handle Stainless Steel ASTM A351 CF8 1

1
21 Handle Nut 300 Series Stainless Steel 1
4
22* Bonnet Seal Impregnated Graphite 1
3
23 Lock Washer 300 Series Stainless Steel 4
4
24 Bonnet Bolt 304 Stainless Steel A2-70 4
5
25 Lock Plate 300 Series Stainless Steel 1

2 26 Stop Pin 300 Series Stainless Steel 2

6
27** Anti-Static Ball 300 Series Stainless Steel 1
7 28** Anti-Static Spring Hard Drawn Stainless Steel 1

* These parts are used in repair kits.

** These parts are used when NS, Anti-Static Device Option is
Series C74 selected.
*** C80 2-1/2" and C89 2" use cryogenic extension shown on the
next page with pipe handles.
1

4
3
4
5
2

6 Smith-Cooper International • Toll Free (800) 766-0076 • Fax (323) 890-4456 • www.smithcooper.com
 SERIES C80/C89 & C70/C74 CRYOGENIC BALL VALVE

Parts & Materials Series C80 Sizes 2½" to 4" ***

24
Series C89 Sizes 2" to 3" ***
Series C70 Sizes 2½" to 4"
12.2
12.1 23

22 Series C74 Sizes 3" to 4"

30
28

ITEM DESCRIPTION MATERIAL QTY.

29
21 1 Body 316 Stainless Steel ASTM A351 CF8M 1
10 20 316 Stainless Steel ASTM A351 CF8M
2 End cap / Connector (Weld ends are 316L) 1-2

9 19 3 Ball 316 Stainless Steel 1

18 4* Seat Kel-F® (PCTFE), Nova, RTFE, TFM®, PTFE 2

27
26
5* Body Seal Impregnated Graphite 1-2

17 6 Seat Ring (80 series only) 316 Stainless Steel ASTM A351 CF8M 1
11 29 7 Body Bolt/Stud A193 Gr. B8 4 - 16
30 16
15
8 Body Nut 300 Series Stainless Steel 4 - 16

14 CRYOGENIC EXTENSION

25 ITEM DESCRIPTION MATERIAL QTY.

13
9 Bonnet Extension 316 Stainless Steel ASTM A351 CF8M 1

10 Stem 316 Stainless Steel 1

11* Bearing PTFE 1

12.1* Thrust Bearing Bottom PEEK 1

12.2* Thrust Bearing Top Nova 1

7 13* Stem Packing - Bottom PTFE, TFM®, Nova 1
2
Series C80/C89 14* Stem Packing - Middle PTFE, TFM®, Nova 4-6
5
4 15* Stem Packing - Top PTFE, TFM®, Nova 1

16 Gland 300 Series Stainless Steel 1

1
17 Stop Plate 300 Series Stainless Steel 1
3 18* Belleville Washer 300 Series Stainless Steel 4
4
19 Lock Tab 300 Series Stainless Steel 1
6
5 20 Packing Nut 300 Series Stainless Steel 1
2
21 Lock Plate 300 Series Stainless Steel 1
7
22 Handle Pipe 300 Series Stainless Steel 1

23 Wrench Block Stainless Steel ASTM A351 CF8 1

1
Series C70 24 Wrench Bolt 300 Series Stainless Steel 1
4
25* Bonnet Seal Impregnated Graphite 1
3
26 Lock Washer 300 Series Stainless Steel 4
4
5
27 Bonnet Bolt 304 Stainless Steel A2-70 4

28 Stop Pin 300 Series Stainless Steel 1

2
29** Anti-Static Ball 300 Series Stainless Steel 2

30** Anti-Static Spring Hard Drawn Stainless Steel 2

7
8
* These parts are used in repair kits.
** These parts are used when NS, Anti-Static Device Option is selected.
*** C80 2-1/2" and C89 2" use four bolt body shown on the previous page.
1
Series C74
4
3
4
5

7 Smith-Cooper International • Toll Free (800) 766-0076 • Fax (323) 890-4456 • www.smithcooper.com
 SERIES C80/C89 & C70/C74 CRYOGENIC BALL VALVE

Dimensions Series C80/C89

Series C80 sizes ½" - 2"
Series C89 sizes ¼" - 1½"

Dimensions for
Actuator Mounting

STEM
HEIGHT

Series C80 sizes 2 ½" - 4"

Series C89 sizes 2" - 3" Series C80 - 3" - 4" Series C80 - 2-½"
Series C89 - 2½" - 3" Series C89 - 2"
Dimensions for
Actuator Mounting

STEM
HEIGHT

Standard Full
Port Port
TE/SW Ext BW
BW Full Port
Dimensions (Inches)
C80 C89 ØPORT A A C D E F G H K (Thread) M ØP (PCD) ØR S ØT X Y
½" ¼", ⅜" 0.44 2.91 - 1.27 12.30 6.42 13.62 11.57 1.81 M5-P0.8 0.264 F04 (1.65) 1.18 0.051 0.394 0.74 0.33
¾" ½" 0.56 3.07 - 1.42 12.44 6.42 13.78 11.73 1.95 M5-P0.8 0.264 F04 (1.65) 1.18 0.051 0.394 0.74 0.33
1" ¾" 0.81 3.72 13.10 1.74 12.91 7.28 14.17 12.09 2.39 M6-P1.0 0.343 F05 (1.97) 1.38 0.059 0.472 0.83 0.37
1¼" 1" 1.00 4.25 13.25 1.91 13.07 7.28 14.33 12.24 2.85 M6-P1.0 0.343 F05 (1.97) 1.38 0.059 0.472 0.83 0.37
1½" 1¼" 1.24 4.57 13.61 2.40 14.37 9.45 15.83 12.99 3.15 M8-P1.25 0.512 F07 (2.76) 2.17 0.059 0.709 1.41 0.54
2" 1½" 1.50 5.04 13.90 2.56 14.57 9.45 15.98 13.15 3.78 M8-P1.25 0.512 F07 (2.76) 2.17 0.059 0.709 1.41 0.54
2½" 2" 2.00 6.34 14.21 3.58 16.02 15.75 17.17 14.33 4.92 M10-P1.5 0.630 F10 (4.02) - - 0.886 1.70 0.59
3" 2½" 2.50 6.65 14.87 3.98 16.65 23.62 18.11 14.72 6.30 M10-P1.5 0.807 F10 (4.02) - - 1.024 1.93 0.68
4" 3" 3.25 8.43 - 4.57 17.20 23.62 18.70 15.35 7.99 M10-P1.5 0.807 F10 (4.02) - - 1.024 1.93 0.68
The dimensions above are for informational purposes only. Please refer to Sharpe® Valves if you need dimensions for construction.

8 Smith-Cooper International • Toll Free (800) 766-0076 • Fax (323) 890-4456 • www.smithcooper.com
 SERIES C80/C89 & C70/C74 CRYOGENIC BALL VALVE

Dimensions Series C70

Series C70 sizes ½" - 2"
Dimensions for
Actuator Mounting

Series C70 sizes 2½" - 4"

Dimensions for
Actuator Mounting

Dimensions (Inches)
Class Class Class Class Class Class
Series 150 300 150 300 150 300
C70 ØPORT A A B B C D E F G ØH ØH K M ØP ØR S ØT X Y
(Thread) (PCD)
½" 0.56 4.25 5.50 1.96 2.36 1.41 12.44 6.42 13.88 11.71 3.50 3.75 M5-P0.8 0.264 F04 (1.65) 1.18 0.051 0.394 0.74 0.33
¾" 0.81 4.62 6.00 2.13 2.52 1.53 12.56 6.42 14.00 11.81 3.88 4.61 M5-P0.9 0.264 F04 (1.65) 1.18 0.051 0.394 0.74 0.33
1" 1.00 5.00 6.50 2.13 2.72 1.93 13.07 7.28 14.37 12.24 4.25 4.88 M6-P1.0 0.343 F05 (1.97) 1.38 0.059 0.472 0.83 0.33
1½" 1.50 6.50 7.50 2.97 3.21 2.56 14.53 9.45 15.98 13.11 5.04 6.12 M8-P1.25 0.512 F07 (2.07) 2.17 0.059 0.709 1.41 0.33
2" 2.00 7.00 8.50 3.25 3.37 2.94 14.90 9.45 16.42 13.49 6.00 6.50 M8-P1.26 0.512 F07 (2.07) 2.17 0.059 0.709 1.41 0.50
2½" 2.50 7.50 9.50 3.58 4.00 3.98 16.65 15.75 18.11 14.72 7.01 7.52 M10-P1.5 0.807 F10 (4.02) - - 1.024 1.93 0.59
3" 2.99 8.00 11.12 3.83 4.20 4.25 16.93 23.62 18.39 15.00 7.52 8.27 M10-P1.5 0.807 F10 (4.02) - - 1.024 1.93 0.68
4" 3.94 9.00 12.00 4.61 5.06 4.90 17.56 23.62 19.03 15.65 9.02 10.00 M10-P1.5 0.807 F10 (4.02) - - 1.024 1.93 0.68
The dimensions above are for informational purposes only. Please refer to Sharpe® Valves if you need dimensions for construction.

9 Smith-Cooper International • Toll Free (800) 766-0076 • Fax (323) 890-4456 • www.smithcooper.com
 SERIES C80/C89 & C70/C74 CRYOGENIC BALL VALVE

Dimensions Series C74

Series C74 sizes 1" - 2"

Dimensions for
Actuator Mounting

Series C74 sizes 3" - 4"

Dimensions for
Actuator Mounting

Dimensions (Inches)
Class Class Class Class Class Class
Series 150 300 150 300 150 300
C74 ØPORT A A B B C D E F G ØH ØH K M ØP ØR S ØT X Y
(Thread) (PCD)
1" 0.81 5.00 6.50 2.70 4.20 1.53 12.56 6.40 14.02 11.81 4.25 4.88 M5-P0.8 0.264 F04 1.18 0.051 0.394 0.74 0.37
(1.65)
F07
1½" 1.24 6.50 7.50 3.35 4.34 2.40 14.37 9.45 15.83 12.99 5.04 6.12 M8-P1.25 0.512 (2.07) 2.17 0.059 0.709 1.41 0.33
F07
2" 1.50 7.00 8.50 3.86 5.35 2.56 14.53 9.45 15.98 12.87 6.00 6.50 M8-P1.25 0.512 (2.07) 2.17 0.059 0.709 1.41 0.54
F10
3" 2.50 8.00 11.12 3.82 6.93 3.98 16.65 23.62 18.07 14.72 7.52 8.27 M10-P1.5 0.807 (4.02) - - 1.024 1.93 0.68
F10
4" 3.25 9.00 12.00 4.80 7.80 4.59 17.24 23.62 18.66 15.31 9.02 10.00 M10-P1.5 0.807 (4.02) - - 1.024 1.93 0.68

The dimensions above are for informational purposes only. Please refer to Sharpe® Valves if you need dimensions for construction.

10 Smith-Cooper International • Toll Free (800) 766-0076 • Fax (323) 890-4456 • www.smithcooper.com
 SERIES C80/C89 & C70/C74 CRYOGENIC BALL VALVE

How To Order Cryogenic Valves

C80/C89
1" C80 - 6 6 6 6 K I N - SW / TE - TP
Size Series Body Ends Ball Stem Seat Body Stem Ends Options
Seal Packing

Size Valve Series Body & Ends Seat Ends Options

C80 C89 Class C80 Standard Port 6 316 Stainless Steel K PCTFE (Kel-F®) TE Threaded Ends HC High Cycle Stem*
- ¼" 600 C89 Full Port M TFM® SW Socketweld NS Anti-Static*
½" ⅜" 600 Ball & Stem N Nova BW10 Buttweld SCH 10*
6 316 Stainless Steel TP Tamper Proof
¾" ½" 600 R RTFE BW40 Buttweld SCH 40 Locking Device
1" ¾" 600 T PTFE
1¼" 1" 600 Ends
1½" 1¼" 600 Body Seal (C89 FP Only)
2" 1½" 600 I Graphite-Impregnated BW80 Buttweld SCH 80 * Price on Application
2½" 2" 600 EBW Buttweld SCH 80
3" 2½" 300
Stem Packing Extended
M TFM®
4" 3" 300
N Nova
T PTFE

Other materials / options available please

contact us with your unique requirement.

Technical Information
Applicable Standards
VALVE SIZE Body Wall Thickness ASME B16.34
APPROX.
Cv WEIGHT (lbs.) SW & Threaded Ends ASME B16.11
C80 C89 Butt-Weld Ends ASME B16.25
½" ¼",¾" 8 4 Basic Design ASME B16.34, BS 6364
¾" ½" 12 4 Pressure Test API 598, MSS-SP 72
1" ¾" 32 6 Mounting Dimensions ISO 5211
1¼" 1" 46 8 Marking MSS-SP 25
1½" 1¼" 80 13
2" 1½" 120 16
2½" 2" 240 33
3" 2½" 350 38
4" 3" 720 59

Cryogenic Valve Preparation:

All cryogenic valves are shell tested, then completely
Traceability: disassembled. All parts are cleaned and degreased in
Heat numbers are provided on all valve
our clean room. The dry parts are then assembled. The
bodies and ends. CMTR’s (certified mill
assembled valve undergoes a seat and seal pressure test
test reports) are available upon request.
with nitrogen. The completed tested valve is packaged in
polyethylene bags before leaving the clean room.

11 Smith-Cooper International • Toll Free (800) 766-0076 • Fax (323) 890-4456 • www.smithcooper.com
 SERIES C80/C89 & C70/C74 CRYOGENIC BALL VALVE

How To Order Cryogenic Valves

C70/C74
1" C70 1 - 6 6 6 K I N - 1 / 1 - TP
Size Series Class Body / Ball Stem Seat Body Stem Ends Options
Ends Seal Packing

Size Valve Series Body & Ends Seat Body Seal Stem Packing Ends
C70 C74 C70 Full Port 6 316 Stainless Steel K PCTFE (Kel-F®) I Graphite- M TFM® 1 Class 150 Flanged RF
½" - C74 Reduced Port M TFM® Impregnated 1F Class 150 Flanged FF
N Nova
¾" -
Ball & Stem N Nova T PTFE 3 Class 300 Flanged RF
6 316 Stainless Steel
1" 1" Class R RTFE 3F Class 300 Flanged FF
1½" 1½" 1 150 T PTFE
2" 2" 3 300 Options
2½" - HC High Cycle Stem*
3" 3" NS Anti-Static*
4" 4" TP Tamper Proof
Locking Device
Other materials / options available please
contact us with your unique requirement. * Price on Application

C70 Technical Information C74 Technical Information Applicable Standards

APPROX. WEIGHT lbs APPROX. WEIGHT lbs Body Wall Thickness ASME B16.34
VALVE VALVE
SIZE Cv SIZE Cv Face to Face Dimensions ASME B16.10
Class 150 Class 300 Class 150 Class 300
Flange Dimensions ASME B16.5
½" 26 5 6 1" 30 10 13
Basic Design ASME B16.34, BS 6364
¾" 50 6 9 1½" 82 21 27
Pressure Test API 598, MSS-SP 72
1" 94 9 12 2" 120 24 28
Mounting Dimensions ISO 5211
1½" 260 18 24 3" 350 45 54
Marking MSS-SP 25
2" 480 26 32 4" 720 71 91
2½" 730 44 53
3" 1100 51 68
4" 2100 70 100

Traceability: Cryogenic Valve Preparation:

Heat numbers are provided on all valve bodies and ends. All cryogenic valves are shell tested, then completely disassembled.
CMTR’s (certified mill test reports) are available upon All parts are cleaned and degreased in our clean room. The dry parts
request. are then assembled. The assembled valve undergoes a seat and seal
pressure test with nitrogen. The completed tested valve is packaged in
polyethylene bags before leaving the clean room.
Kel-F® is a registered trademark of 3M Company. | TFM® is a registered trademark of Dyneon.
Due to continuous development of our product range we reserve the right to change the dimensions and information contained in the leaflet as required.

12 Smith-Cooper International • Toll Free (800) 766-0076 • Fax (323) 890-4456 • www.smithcooper.com