FUEL PROCESSING TECHNOLOGY

An international journal devoted to all aspects of processing and utilization of fuel

AUTHOR INFORMATION PACK

TABLE OF CONTENTS XXX

. .

• Description p.1
• Audience p.1
• Impact Factor p.1
• Abstracting and Indexing p.2
• Editorial Board p.2
• Guide for Authors p.4
ISSN: 0378-3820

DESCRIPTION
.

Fuel Processing Technology (FPT) deals with the scientific and technological aspects of converting
fossil and renewable resources to clean fuels, value-added chemicals, fuel-related advanced carbon
materials and by-products. In addition to the traditional non-nuclear fossil fuels, biomass and wastes,
papers on the integration of renewables such as solar and wind energy and energy storage into the fuel
processing processes, as well as papers on the production and conversion of non-carbon-containing
fuels such as hydrogen and ammonia, are also welcome. While chemical conversion is emphasized,
papers on advanced physical conversion processes are also considered for publication in FPT. Papers
on the fundamental aspects of fuel structure and properties will also be considered.

For a full list of the classifications considered by FPT please click here

Benefits to authors
We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts
on Elsevier publications and much more. Please click here for more information on our author services.

Please see our Guide for Authors for information on article submission. If you require any further
information or help, please visit our Support Center

AUDIENCE
.

Scientists and engineers working in fuel science and energy technology.

IMPACT FACTOR
.

2019: 4.982 © Clarivate Analytics Journal Citation Reports 2020

AUTHOR INFORMATION PACK 15 Sep 2020 www.elsevier.com/locate/fuproc 1

ABSTRACTING AND INDEXING
.

Current Contents
EI Compendex Plus
Ei Engineering
Cambridge Scientific Abstracts
APILIT
Energy Science and Technology
Fuel and Energy Abstracts
Engineering Village - GEOBASE
Pascal Francis
Environmental Periodicals Bibliography
AESIS
FLUIDEX
Web of Science
Scopus
BMT Abstracts
Chemical Abstracts
Academic Search (EBSCO)
Chimica
Compendex
Engineering Information Database EnCompass LIT (Elsevier)
OCLC Contents Alert
Engineering Index Monthly
Science Citation Index Expanded
Web of Science
Referativnyi Zhurnal VINTI-RAN (Russian Academy of Sciences)
INSPEC

EDITORIAL BOARD
.

Editor-in-Chief
Chun-Zhu Li, Curtin University Fuels and Energy Technology Institute, GPO Box U1987, Perth, 6845, Western
Australia, Australia
Managing Editor
Aimaro Sanna, Heriot-Watt University, Edinburgh, United Kingdom
Associate Editors
Thomas J. Bruno, National Institute of Standards and Thermophysical Properties of Fluids Group, 325 Broadway,
Boulder, Colorado, CO 80305-3328, United States
Hero Jan Heeres, Groningen University Faculty of Science and Engineering, Nijenborgh 4, 9747 AG, Groningen,
Netherlands
Fabrizio Scala, University of Naples Federico II Department of Chemical Engineering Materials and Industrial
Production, Piazzale V. Tecchio, 80, 80125, Napoli, Italy
Keiichi Tomishige, Tohoku University Graduate School of Engineering School of Engineering Department of
Applied Chemistry, 6-6-07, Aoba, Aramaki, Aoba-ku, 980-8579, Sendai, Japan
Rui Xiao, Southeast University School of Energy and Environment, Nanjing, China
Haiping Yang, Huazhong University of Science and Technology State Key Laboratory of Coal Combustion, 1037
Luoyu Road, 430074, Wuhan, China
Editorial Board Members
Juan Adánez, Carboquimica Institute, Zaragoza, Spain
Edward Anthony, Cranfield University, Cranfield, Bedford, United Kingdom
Jose Luis Figueiredo, University of Porto, Porto, Portugal
Guoqing Guan, Hirosaki University Institute of Regional Innovation, Aomori, Japan
Haoquan Hu, Dalian University of Technology School of Chemical Engineering, Dalian, China
George Willis Huber, University of Wisconsin Madison, Madison, Wisconsin, United States
Atsushi Ishihara, Mie University Graduate School of Engineering Faculty of Engineering, Tsu, Japan
Angelos Lappas, Centre for Research and Technology-Hellas, Thessaloniki, Greece
Wen Li, Chinese Academy of Sciences Institute of Coal Chemistry, Taiyuan, Shanxi, China
Ronghou Liu, Shanghai Jiao Tong University - Fahua Campus, Shanghai, China
Zhenyu Liu, State Key Laboratory of Chemical Resource Engineering, Beijing, China

AUTHOR INFORMATION PACK 15 Sep 2020 www.elsevier.com/locate/fuproc 2

Zhongyang Luo, Zhejiang University, Hangzhou, China
Longlong Ma, Chinese Academy of Sciences Guangzhou Branch, China
M. Mercedes Maroto-Valer, Heriot-Watt University, Edinburgh, United Kingdom
Bernd Meyer, TU Bergakademie Freiberg University, Freiberg, Germany
Ramon Murillo, Zaragoza, Spain
Christopher Roberts, Auburn University, Auburn, Alabama, United States
Piero Salatino, University of Campania Luigi Vanvitelli, Napoli, Italy
Yasushi Sekine, Waseda University Faculty of Science and Engineering Department of Applied Chemistry
Polymer Chemistry, Shinjuku-Ku, Tokyo, Japan
Brajendra Sharma, Illinois Sustainable Technology Center, Champaign, Illinois, United States
Hari Babu Vuthaluru, Curtin University, Perth, Western Australia, Australia
Huanting Wang, Monash University, Clayton, Victoria, Australia
Xian-Yong Wei, Key Laboratory of Coal Processing and Efficient Utilization Ministry of Education, Xuzhou, China

AUTHOR INFORMATION PACK 15 Sep 2020 www.elsevier.com/locate/fuproc 3

GUIDE FOR AUTHORS
.

Types of Paper
Five types of papers are published: primary research papers (experimental and/or theoretical),
scholarly reviews (including pertinent polemics), short communications, letters to the Editor, and
invited review article.
A short communication is a concise but complete description of an investigation which will not be
included in a later paper.
Submission checklist
You can use this list to carry out a final check of your submission before you send it to the journal for
review. Please check the relevant section in this Guide for Authors for more details.

Ensure that the following items are present:

One author has been designated as the corresponding author with contact details:
• E-mail address
• Full postal address

All necessary files have been uploaded:

Manuscript:
• Include keywords
• The manuscript text must be line-numbered continuously
• Figures and Tables should be embedded into the text where they first appear
• All figures (include relevant captions)
• All tables (including titles, description, footnotes)
• Ensure all figure and table citations in the text match the files provided
• Indicate clearly if color should be used for any figures in print
Graphical Abstracts / Highlights files (where applicable)
Supplemental files (where applicable)

Further considerations
• Manuscript has been 'spell checked' and 'grammar checked'
• In your cover letter, you should list at least 5 papers that are listed in the reference section of your
paper being submitted and that have been published within the past 18 months in any journal. One
author, preferably the corresponding author, of each of these 5 references should be listed as your
nominated reviewers for your paper being submitted. None of the nominated reviewers should be a
co-author of the current paper being submitted and/or has co-authored any papers during the past
18 months with any of the authors of the current paper being submitted. In rare cases, reasons for
not meeting this requirement must be clearly justified in the covering letter. The editors reserve the
right to use any or none of the nominated reviewers as the reviewers for your paper being submitted
• All references mentioned in the Reference List are cited in the text, and vice versa
• Permission has been obtained for use of copyrighted material from other sources (including the
Internet)
• A competing interests statement is provided, even if the authors have no competing interests to
declare
• Journal policies detailed in this guide have been reviewed
• Referee suggestions and contact details provided, based on journal requirements

For further information, visit our Support Center.

BEFORE YOU BEGIN

Ethics in publishing
Please see our information pages on Ethics in publishing and Ethical guidelines for journal publication.
Declaration of competing interest
All authors must disclose any financial and personal relationships with other people or organizations
that could inappropriately influence (bias) their work. Examples of potential conflicts of interest include
employment, consultancies, stock ownership, honoraria, paid expert testimony, patent applications/
registrations, and grants or other funding. Authors should complete the declaration of competing
interest statement using this template and upload to the submission system at the Attach/Upload Files

AUTHOR INFORMATION PACK 15 Sep 2020 www.elsevier.com/locate/fuproc 4

step. Note: Please do not convert the .docx template to another file type. Author signatures
are not required. If there are no interests to declare, please choose the first option in the template.
This statement will be published within the article if accepted. More information.
Submission declaration and verification
Submission of an article implies that the work described has not been published previously (except in
the form of an abstract, a published lecture or academic thesis, see 'Multiple, redundant or concurrent
publication' for more information), that it is not under consideration for publication elsewhere, that
its publication is approved by all authors and tacitly or explicitly by the responsible authorities where
the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in
English or in any other language, including electronically without the written consent of the copyright-
holder. To verify originality, your article may be checked by the originality detection service Crossref
Similarity Check.
Preprints
Please note that preprints can be shared anywhere at any time, in line with Elsevier's sharing policy.
Sharing your preprints e.g. on a preprint server will not count as prior publication (see 'Multiple,
redundant or concurrent publication' for more information).
Use of inclusive language
Inclusive language acknowledges diversity, conveys respect to all people, is sensitive to differences,
and promotes equal opportunities. Content should make no assumptions about the beliefs or
commitments of any reader; contain nothing which might imply that one individual is superior to
another on the grounds of age, gender, race, ethnicity, culture, sexual orientation, disability or health
condition; and use inclusive language throughout. Authors should ensure that writing is free from bias,
stereotypes, slang, reference to dominant culture and/or cultural assumptions. We advise to seek
gender neutrality by using plural nouns ("clinicians, patients/clients") as default/wherever possible
to avoid using "he, she," or "he/she." We recommend avoiding the use of descriptors that refer to
personal attributes such as age, gender, race, ethnicity, culture, sexual orientation, disability or health
condition unless they are relevant and valid. These guidelines are meant as a point of reference to
help identify appropriate language but are by no means exhaustive or definitive.
Author contributions
For transparency, we encourage authors to submit an author statement file outlining their individual
contributions to the paper using the relevant CRediT roles: Conceptualization; Data curation;
Formal analysis; Funding acquisition; Investigation; Methodology; Project administration; Resources;
Software; Supervision; Validation; Visualization; Roles/Writing - original draft; Writing - review &
editing. Authorship statements should be formatted with the names of authors first and CRediT role(s)
following. More details and an example
Changes to authorship
Authors are expected to consider carefully the list and order of authors before submitting their
manuscript and provide the definitive list of authors at the time of the original submission. Any
addition, deletion or rearrangement of author names in the authorship list should be made only
before the manuscript has been accepted and only if approved by the journal Editor. To request such
a change, the Editor must receive the following from the corresponding author: (a) the reason
for the change in author list and (b) written confirmation (e-mail, letter) from all authors that they
agree with the addition, removal or rearrangement. In the case of addition or removal of authors,
this includes confirmation from the author being added or removed.
Only in exceptional circumstances will the Editor consider the addition, deletion or rearrangement of
authors after the manuscript has been accepted. While the Editor considers the request, publication
of the manuscript will be suspended. If the manuscript has already been published in an online issue,
any requests approved by the Editor will result in a corrigendum.
Article transfer service
This journal is part of our Article Transfer Service. This means that if the Editor feels your article is
more suitable in one of our other participating journals, then you may be asked to consider transferring
the article to one of those. If you agree, your article will be transferred automatically on your behalf
with no need to reformat. Please note that your article will be reviewed again by the new journal.
More information.

AUTHOR INFORMATION PACK 15 Sep 2020 www.elsevier.com/locate/fuproc 5

Copyright
Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (see
more information on this). An e-mail will be sent to the corresponding author confirming receipt of
the manuscript together with a 'Journal Publishing Agreement' form or a link to the online version
of this agreement.

Subscribers may reproduce tables of contents or prepare lists of articles including abstracts for internal
circulation within their institutions. Permission of the Publisher is required for resale or distribution
outside the institution and for all other derivative works, including compilations and translations. If
excerpts from other copyrighted works are included, the author(s) must obtain written permission
from the copyright owners and credit the source(s) in the article. Elsevier has preprinted forms for
use by authors in these cases.

For gold open access articles: Upon acceptance of an article, authors will be asked to complete an
'Exclusive License Agreement' (more information). Permitted third party reuse of gold open access
articles is determined by the author's choice of user license.

Author rights
As an author you (or your employer or institution) have certain rights to reuse your work. More
information.
Elsevier supports responsible sharing
Find out how you can share your research published in Elsevier journals.
Role of the funding source
You are requested to identify who provided financial support for the conduct of the research and/or
preparation of the article and to briefly describe the role of the sponsor(s), if any, in study design; in
the collection, analysis and interpretation of data; in the writing of the report; and in the decision to
submit the article for publication. If the funding source(s) had no such involvement then this should
be stated.
Open access
Please visit our Open Access page for more information.
Elsevier Researcher Academy
Researcher Academy is a free e-learning platform designed to support early and mid-career
researchers throughout their research journey. The "Learn" environment at Researcher Academy
offers several interactive modules, webinars, downloadable guides and resources to guide you through
the process of writing for research and going through peer review. Feel free to use these free resources
to improve your submission and navigate the publication process with ease.
Language (usage and editing services)
Please write your text in good English (American or British usage is accepted, but not a mixture of
these). Authors who feel their English language manuscript may require editing to eliminate possible
grammatical or spelling errors and to conform to correct scientific English may wish to use the English
Language Editing service available from Elsevier's Author Services.
Submission
Our online submission system guides you stepwise through the process of entering your article
details and uploading your files. The system converts your article files to a single PDF file used in
the peer-review process. Editable files (e.g., Word, LaTeX) are required to typeset your article for
final publication. All correspondence, including notification of the Editor's decision and requests for
revision, is sent by e-mail.
Submit your article
Please submit your article via Editorial Manager.
Referees
Please submit, with the manuscript, the names, addresses and e-mail addresses of five potential
referees. Note that the editor retains the sole right to decide whether or not the suggested reviewers
are used.
Additional Information

AUTHOR INFORMATION PACK 15 Sep 2020 www.elsevier.com/locate/fuproc 6

All papers should be concisely written. A short communication should not exceed five printed pages
(approximately 2500 words, or the equivalent in tables and illustrations). The language of the journal
is English (American or British spelling, but with use of only one form in the same paper). The author
should remember that the journal is international and read widely by those whose first language may
not be English. Clarity and precision are best achieved by the use of short words and simple sentences.
The Equations and Tables should be submitted in editable format.

PREPARATION
Peer review
This journal operates a single blind review process. All contributions will be initially assessed by the
editor for suitability for the journal. Papers deemed suitable are then typically sent to a minimum of
two independent expert reviewers to assess the scientific quality of the paper. The Editor is responsible
for the final decision regarding acceptance or rejection of articles. The Editor's decision is final. More
information on types of peer review.
Use of word processing software
It is important that the file be saved in the native format of the word processor used. The text
should be in single-column format. Keep the layout of the text as simple as possible. Most formatting
codes will be removed and replaced on processing the article. In particular, do not use the word
processor's options to justify text or to hyphenate words. However, do use bold face, italics, subscripts,
superscripts etc. When preparing tables, if you are using a table grid, use only one grid for each
individual table and not a grid for each row. If no grid is used, use tabs, not spaces, to align columns.
The electronic text should be prepared in a way very similar to that of conventional manuscripts (see
also the Guide to Publishing with Elsevier). Note that source files of figures, tables and text graphics
will be required whether or not you embed your figures in the text. See also the section on Electronic
artwork.
To avoid unnecessary errors you are strongly advised to use the 'spell-check' and 'grammar-check'
functions of your word processor.
LaTeX
You are recommended to use the Elsevier article class elsarticle.cls to prepare your manuscript and
BibTeX to generate your bibliography.
Our LaTeX site has detailed submission instructions, templates and other information.
Article structure
Subdivision - numbered sections
Divide your article into clearly defined and numbered sections. Subsections should be numbered
1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Use this
numbering also for internal cross-referencing: do not just refer to 'the text'. Any subsection may be
given a brief heading. Each heading should appear on its own separate line.
Introduction
All papers should have a short Introduction. This should state the reason for the work, with brief
reference to previous work on the subject.
Material and Methods
Experimental: The experimental methods and the materials used should be described after the
introductory paragraphs. Detailed technical descriptions should be restricted to one section of the
paper, and not scattered throughout the text. Sufficient information should be given to allow any
reasonably experienced worker to carry out the procedure. Detailed descriptions of well-known
techniques and equipment are unnecessary, as are simple preparations of reagents or solutions, and
lists of common chemicals. In writing, complete sentences should be used.
Results and Discussion
Preferably these should be treated together to avoid unnecessary repetition. Unsupported elaboration
of hypotheses, and verbose exposition of ideas should be avoided. Chemical formulae should not be
used in the text unless confusion is likely to arise from the use of names. Formulae may, however,
be used for brevity in tables and figures.
Conclusions
The significance of the results should be presented here.

AUTHOR INFORMATION PACK 15 Sep 2020 www.elsevier.com/locate/fuproc 7

Data Availability
Authors are encouraged to include a 'Data Availability' section in their manuscript which is visible
in ALL reading formats and may refer to data hosted in ANY repository. It should be placed before
the references to provide readers with information about where they can obtain the research data
required to reproduce the work reported in the manuscript, and typically consists of a simple sentence
giving the URL(s) of and citation(s) to the dataset(s). Full information can be found here.
Appendices
If there is more than one appendix, they should be identified as A, B, etc. Formulae and equations in
appendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix,
Eq. (B.1) and so on. Similarly for tables and figures: Table A.1; Fig. A.1, etc.
Essential title page information
• Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid
abbreviations and formulae where possible.
• Author names and affiliations. Please clearly indicate the given name(s) and family name(s)
of each author and check that all names are accurately spelled. You can add your name between
parentheses in your own script behind the English transliteration. Present the authors' affiliation
addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-
case superscript letter immediately after the author's name and in front of the appropriate address.
Provide the full postal address of each affiliation, including the country name and, if available, the
e-mail address of each author.
• Corresponding author. Clearly indicate who will handle correspondence at all stages of refereeing
and publication, also post-publication. This responsibility includes answering any future queries about
Methodology and Materials. Ensure that the e-mail address is given and that contact details
are kept up to date by the corresponding author.
• Present/permanent address. If an author has moved since the work described in the article was
done, or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as
a footnote to that author's name. The address at which the author actually did the work must be
retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Highlights
Highlights are mandatory for this journal as they help increase the discoverability of your article via
search engines. They consist of a short collection of bullet points that capture the novel results of
your research as well as new methods that were used during the study (if any). Please have a look
at the examples here: example Highlights.

Highlights should be submitted in a separate editable file in the online submission system. Please
use 'Highlights' in the file name and include 3 to 5 bullet points (maximum 85 characters, including
spaces, per bullet point).
Abstract
Abstract: All papers must include an Abstract (50-200 words) which should comprise a brief and
factual account of the contents and conclusions of the paper, with emphasis on new information.
Abbreviations, jargon and reference numbers should not be used. The abstract should be suitable for
use by abstracting services without rewriting.
Graphical abstract
Although a graphical abstract is optional, its use is encouraged as it draws more attention to the online
article. The graphical abstract should summarize the contents of the article in a concise, pictorial form
designed to capture the attention of a wide readership. Graphical abstracts should be submitted as a
separate file in the online submission system. Image size: Please provide an image with a minimum
of 531 × 1328 pixels (h × w) or proportionally more. The image should be readable at a size of 5 ×
13 cm using a regular screen resolution of 96 dpi. Preferred file types: TIFF, EPS, PDF or MS Office
files. You can view Example Graphical Abstracts on our information site.
Authors can make use of Elsevier's Illustration Services to ensure the best presentation of their images
and in accordance with all technical requirements.
Keywords
Keywords: Immediately after the abstract, provide a maximum of six keywords (avoid, for example,
'and', 'of'). Be sparing with abbreviations: only abbreviations firmly established in the field may be
eligible

AUTHOR INFORMATION PACK 15 Sep 2020 www.elsevier.com/locate/fuproc 8

Acknowledgements
Acknowledgements: Acknowledgements should be kept as short as possible, and placed at the
conclusion of the text.
Formatting of funding sources
List funding sources in this standard way to facilitate compliance to funder's requirements:

Funding: This work was supported by the National Institutes of Health [grant numbers xxxx, yyyy];
the Bill & Melinda Gates Foundation, Seattle, WA [grant number zzzz]; and the United States Institutes
of Peace [grant number aaaa].

It is not necessary to include detailed descriptions on the program or type of grants and awards. When
funding is from a block grant or other resources available to a university, college, or other research
institution, submit the name of the institute or organization that provided the funding.

If no funding has been provided for the research, please include the following sentence:

This research did not receive any specific grant from funding agencies in the public, commercial, or
not-for-profit sectors.
Nomenclature and Units
Units: Follow internationally accepted rules and conventions: use the international system of units
(SI). If other quantities are mentioned, give their equivalent in SI in parentheses.
Math Formulae
Maths: Formulae should be regarded as part of the text as far as punctuation is concerned. It is
recommended that natural or Napierian logarithms should be denoted by In while decade logarithms
should be denoted by log. Powers of e are often more conveniently denoted by exp( ). The
multiplication sign should be used in floating point numbers to avoid confusion, i.e., 4.25x105, not
4.25.105. The decimal point should always be denoted by a full stop.
Artwork
Electronic artwork
General points
• Make sure you use uniform lettering and sizing of your original artwork.
• Embed the used fonts if the application provides that option.
• Aim to use the following fonts in your illustrations: Arial, Courier, Times New Roman, Symbol, or
use fonts that look similar.
• Number the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files.
• Provide captions to illustrations separately.
• Size the illustrations close to the desired dimensions of the published version.
• Submit each illustration as a separate file.
• Ensure that color images are accessible to all, including those with impaired color vision.

A detailed guide on electronic artwork is available.

You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
If your electronic artwork is created in a Microsoft Office application (Word, PowerPoint, Excel) then
please supply 'as is' in the native document format.
Regardless of the application used other than Microsoft Office, when your electronic artwork is
finalized, please 'Save as' or convert the images to one of the following formats (note the resolution
requirements for line drawings, halftones, and line/halftone combinations given below):
EPS (or PDF): Vector drawings, embed all used fonts.
TIFF (or JPEG): Color or grayscale photographs (halftones), keep to a minimum of 300 dpi.
TIFF (or JPEG): Bitmapped (pure black & white pixels) line drawings, keep to a minimum of 1000 dpi.
TIFF (or JPEG): Combinations bitmapped line/half-tone (color or grayscale), keep to a minimum of
500 dpi.
Please do not:
• Supply files that are optimized for screen use (e.g., GIF, BMP, PICT, WPG); these typically have a
low number of pixels and limited set of colors;
• Supply files that are too low in resolution;

AUTHOR INFORMATION PACK 15 Sep 2020 www.elsevier.com/locate/fuproc 9

• Submit graphics that are disproportionately large for the content.
Color artwork
Please make sure that artwork files are in an acceptable format (TIFF (or JPEG), EPS (or PDF), or
MS Office files) and with the correct resolution. If, together with your accepted article, you submit
usable color figures then Elsevier will ensure, at no additional charge, that these figures will appear
in color online (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations
are reproduced in color in the printed version. For color reproduction in print, you will receive
information regarding the costs from Elsevier after receipt of your accepted article. Please
indicate your preference for color: in print or online only. Further information on the preparation of
electronic artwork.
Figure captions
Ensure that each illustration has a caption. Supply captions separately, not attached to the figure. A
caption should comprise a brief title (not on the figure itself) and a description of the illustration. Keep
text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Tables
Tables: Careful thought should be given to the layout of tables (and figures) so that the significance
of the results may be quickly grasped by the busy reader. Often a table of results can be understood
more readily if columns and lines are interchanged. It should also be remembered that the length of
a printed page is greater than its width. Tables should be numbered with the Arabic numerals and
should have headings that make their general meaning understandable without reference to the text.
The units in which results are expressed should be given at the top of each column (in parentheses)
and not be repeated on each line of the table. Footnotes should be indicated by the use of lower-case
letters (a, b, c, etc.), as superscripts without parentheses.
References
Citation in text
Please ensure that every reference cited in the text is also present in the reference list (and vice
versa). Any references cited in the abstract must be given in full. Unpublished results and personal
communications are not recommended in the reference list, but may be mentioned in the text. If these
references are included in the reference list they should follow the standard reference style of the
journal and should include a substitution of the publication date with either 'Unpublished results' or
'Personal communication'. Citation of a reference as 'in press' implies that the item has been accepted
for publication.
Reference links
Increased discoverability of research and high quality peer review are ensured by online links to
the sources cited. In order to allow us to create links to abstracting and indexing services, such as
Scopus, CrossRef and PubMed, please ensure that data provided in the references are correct. Please
note that incorrect surnames, journal/book titles, publication year and pagination may prevent link
creation. When copying references, please be careful as they may already contain errors. Use of the
DOI is highly encouraged.

A DOI is guaranteed never to change, so you can use it as a permanent link to any electronic article.
An example of a citation using DOI for an article not yet in an issue is: VanDecar J.C., Russo R.M.,
James D.E., Ambeh W.B., Franke M. (2003). Aseismic continuation of the Lesser Antilles slab beneath
northeastern Venezuela. Journal of Geophysical Research, https://doi.org/10.1029/2001JB000884.
Please note the format of such citations should be in the same style as all other references in the paper.
Web references
As a minimum, the full URL should be given and the date when the reference was last accessed. Any
further information, if known (DOI, author names, dates, reference to a source publication, etc.),
should also be given. Web references can be listed separately (e.g., after the reference list) under a
different heading if desired, or can be included in the reference list.
Data references
This journal encourages you to cite underlying or relevant datasets in your manuscript by citing them
in your text and including a data reference in your Reference List. Data references should include the
following elements: author name(s), dataset title, data repository, version (where available), year,
and global persistent identifier. Add [dataset] immediately before the reference so we can properly
identify it as a data reference. The [dataset] identifier will not appear in your published article.

AUTHOR INFORMATION PACK 15 Sep 2020 www.elsevier.com/locate/fuproc 10

References in a special issue
Please ensure that the words 'this issue' are added to any references in the list (and any citations in
the text) to other articles in the same Special Issue.
Reference management software
Most Elsevier journals have their reference template available in many of the most popular reference
management software products. These include all products that support Citation Style Language
styles, such as Mendeley. Using citation plug-ins from these products, authors only need to select
the appropriate journal template when preparing their article, after which citations and bibliographies
will be automatically formatted in the journal's style. If no template is yet available for this journal,
please follow the format of the sample references and citations as shown in this Guide. If you use
reference management software, please ensure that you remove all field codes before submitting
the electronic manuscript. More information on how to remove field codes from different reference
management software.
Users of Mendeley Desktop can easily install the reference style for this journal by clicking the following
link:
http://open.mendeley.com/use-citation-style/fuel-processing-technology
When preparing your manuscript, you will then be able to select this style using the Mendeley plug-
ins for Microsoft Word or LibreOffice.
Reference formatting
There are no strict requirements on reference formatting at submission. References can be in any
style or format as long as the style is consistent. Where applicable, author(s) name(s), journal title/
book title, chapter title/article title, year of publication, volume number/book chapter and the article
number or pagination must be present. Use of DOI is highly encouraged. The reference style used by
the journal will be applied to the accepted article by Elsevier at the proof stage. Note that missing data
will be highlighted at proof stage for the author to correct. If you do wish to format the references
yourself they should be arranged according to the following examples:
Reference style
Text: Indicate references by number(s) in square brackets in line with the text. The actual authors
can be referred to, but the reference number(s) must always be given.
Example: '..... as demonstrated [3,6]. Barnaby and Jones [8] obtained a different result ....'
List: Number the references (numbers in square brackets) in the list in the order in which they appear
in the text.
Examples:
Reference to a journal publication:
[1] J. van der Geer, J.A.J. Hanraads, R.A. Lupton, The art of writing a scientific article, J. Sci. Commun.
163 (2010) 51–59. https://doi.org/10.1016/j.Sc.2010.00372.
Reference to a journal publication with an article number:
[2] J. van der Geer, J.A.J. Hanraads, R.A. Lupton, 2018. The art of writing a scientific article. Heliyon.
19, e00205. https://doi.org/10.1016/j.heliyon.2018.e00205.
Reference to a book:
[3] W. Strunk Jr., E.B. White, The Elements of Style, fourth ed., Longman, New York, 2000.
Reference to a chapter in an edited book:
[4] G.R. Mettam, L.B. Adams, How to prepare an electronic version of your article, in: B.S. Jones, R.Z.
Smith (Eds.), Introduction to the Electronic Age, E-Publishing Inc., New York, 2009, pp. 281–304.
Reference to a website:
[5] Cancer Research UK, Cancer statistics reports for the UK. http://www.cancerresearchuk.org/
aboutcancer/statistics/cancerstatsreport/, 2003 (accessed 13 March 2003).
Reference to a dataset:
[dataset] [6] M. Oguro, S. Imahiro, S. Saito, T. Nakashizuka, Mortality data for Japanese oak wilt
disease and surrounding forest compositions, Mendeley Data, v1, 2015. https://doi.org/10.17632/
xwj98nb39r.1.
Video
Elsevier accepts video material and animation sequences to support and enhance your scientific
research. Authors who have video or animation files that they wish to submit with their article are
strongly encouraged to include links to these within the body of the article. This can be done in the
same way as a figure or table by referring to the video or animation content and noting in the body
text where it should be placed. All submitted files should be properly labeled so that they directly
relate to the video file's content. In order to ensure that your video or animation material is directly

AUTHOR INFORMATION PACK 15 Sep 2020 www.elsevier.com/locate/fuproc 11

usable, please provide the file in one of our recommended file formats with a preferred maximum
size of 150 MB per file, 1 GB in total. Video and animation files supplied will be published online in
the electronic version of your article in Elsevier Web products, including ScienceDirect. Please supply
'stills' with your files: you can choose any frame from the video or animation or make a separate
image. These will be used instead of standard icons and will personalize the link to your video data. For
more detailed instructions please visit our video instruction pages. Note: since video and animation
cannot be embedded in the print version of the journal, please provide text for both the electronic
and the print version for the portions of the article that refer to this content.
Data visualization
Include interactive data visualizations in your publication and let your readers interact and engage
more closely with your research. Follow the instructions here to find out about available data
visualization options and how to include them with your article.
Supplementary material
Supplementary material such as applications, images and sound clips, can be published with your
article to enhance it. Submitted supplementary items are published exactly as they are received (Excel
or PowerPoint files will appear as such online). Please submit your material together with the article
and supply a concise, descriptive caption for each supplementary file. If you wish to make changes to
supplementary material during any stage of the process, please make sure to provide an updated file.
Do not annotate any corrections on a previous version. Please switch off the 'Track Changes' option
in Microsoft Office files as these will appear in the published version.
Research data
This journal encourages and enables you to share data that supports your research publication
where appropriate, and enables you to interlink the data with your published articles. Research data
refers to the results of observations or experimentation that validate research findings. To facilitate
reproducibility and data reuse, this journal also encourages you to share your software, code, models,
algorithms, protocols, methods and other useful materials related to the project.

Below are a number of ways in which you can associate data with your article or make a statement
about the availability of your data when submitting your manuscript. If you are sharing data in one of
these ways, you are encouraged to cite the data in your manuscript and reference list. Please refer to
the "References" section for more information about data citation. For more information on depositing,
sharing and using research data and other relevant research materials, visit the research data page.
Data linking
If you have made your research data available in a data repository, you can link your article directly to
the dataset. Elsevier collaborates with a number of repositories to link articles on ScienceDirect with
relevant repositories, giving readers access to underlying data that gives them a better understanding
of the research described.

There are different ways to link your datasets to your article. When available, you can directly link
your dataset to your article by providing the relevant information in the submission system. For more
information, visit the database linking page.

For supported data repositories a repository banner will automatically appear next to your published
article on ScienceDirect.

In addition, you can link to relevant data or entities through identifiers within the text of your
manuscript, using the following format: Database: xxxx (e.g., TAIR: AT1G01020; CCDC: 734053;
PDB: 1XFN).
Mendeley Data
This journal supports Mendeley Data, enabling you to deposit any research data (including raw and
processed data, video, code, software, algorithms, protocols, and methods) associated with your
manuscript in a free-to-use, open access repository. During the submission process, after uploading
your manuscript, you will have the opportunity to upload your relevant datasets directly to Mendeley
Data. The datasets will be listed and directly accessible to readers next to your published article online.

For more information, visit the Mendeley Data for journals page.

AUTHOR INFORMATION PACK 15 Sep 2020 www.elsevier.com/locate/fuproc 12

To maximise the visibility of your data, authors are invited to add a citation to their
datasets by including a data reference in their Reference List as per the 'Data References'
instructions elsewhere on this page.
Data in Brief
You have the option of converting any or all parts of your supplementary or additional raw data into
one or multiple data articles, a new kind of article that houses and describes your data. Data articles
ensure that your data is actively reviewed, curated, formatted, indexed, given a DOI and publicly
available to all upon publication. You are encouraged to submit your article for Data in Brief as an
additional item directly alongside the revised version of your manuscript. If your research article is
accepted, your data article will automatically be transferred over to Data in Brief where it will be
editorially reviewed and published in the open access data journal, Data in Brief. Please note an open
access fee of 600 USD is payable for publication in Data in Brief. Full details can be found on the Data
in Brief website. Please use this template to write your Data in Brief.
MethodsX
You have the option of converting relevant protocols and methods into one or multiple MethodsX
articles, a new kind of article that describes the details of customized research methods. Many
researchers spend a significant amount of time on developing methods to fit their specific needs or
setting, but often without getting credit for this part of their work. MethodsX, an open access journal,
now publishes this information in order to make it searchable, peer reviewed, citable and reproducible.
Authors are encouraged to submit their MethodsX article as an additional item directly alongside the
revised version of their manuscript. If your research article is accepted, your methods article will
automatically be transferred over to MethodsX where it will be editorially reviewed. Please note an
open access fee is payable for publication in MethodsX. Full details can be found on the MethodsX
website. Please use this template to prepare your MethodsX article.
Data statement
To foster transparency, we encourage you to state the availability of your data in your submission.
This may be a requirement of your funding body or institution. If your data is unavailable to access
or unsuitable to post, you will have the opportunity to indicate why during the submission process,
for example by stating that the research data is confidential. The statement will appear with your
published article on ScienceDirect. For more information, visit the Data Statement page.

AFTER ACCEPTANCE
Online proof correction
To ensure a fast publication process of the article, we kindly ask authors to provide us with their proof
corrections within two days. Corresponding authors will receive an e-mail with a link to our online
proofing system, allowing annotation and correction of proofs online. The environment is similar to
MS Word: in addition to editing text, you can also comment on figures/tables and answer questions
from the Copy Editor. Web-based proofing provides a faster and less error-prone process by allowing
you to directly type your corrections, eliminating the potential introduction of errors.
If preferred, you can still choose to annotate and upload your edits on the PDF version. All instructions
for proofing will be given in the e-mail we send to authors, including alternative methods to the online
version and PDF.
We will do everything possible to get your article published quickly and accurately. Please use this
proof only for checking the typesetting, editing, completeness and correctness of the text, tables and
figures. Significant changes to the article as accepted for publication will only be considered at this
stage with permission from the Editor. It is important to ensure that all corrections are sent back
to us in one communication. Please check carefully before replying, as inclusion of any subsequent
corrections cannot be guaranteed. Proofreading is solely your responsibility.
Offprints
The corresponding author will, at no cost, receive a customized Share Link providing 50 days free
access to the final published version of the article on ScienceDirect. The Share Link can be used for
sharing the article via any communication channel, including email and social media. For an extra
charge, paper offprints can be ordered via the offprint order form which is sent once the article is
accepted for publication. Both corresponding and co-authors may order offprints at any time via
Elsevier's Author Services. Corresponding authors who have published their article gold open access
do not receive a Share Link as their final published version of the article is available open access on
ScienceDirect and can be shared through the article DOI link.

AUTHOR INFORMATION PACK 15 Sep 2020 www.elsevier.com/locate/fuproc 13

AUTHOR INQUIRIES
Visit the Elsevier Support Center to find the answers you need. Here you will find everything from
Frequently Asked Questions to ways to get in touch.
You can also check the status of your submitted article or find out when your accepted article will
be published.
© Copyright 2018 Elsevier | https://www.elsevier.com

AUTHOR INFORMATION PACK 15 Sep 2020 www.elsevier.com/locate/fuproc 14