Scribd
Upload
60 views

Name: Roll No: Sub:: AIM Geometric Modelling

1. The document describes experiments in geometric modeling using Creo software. 2. It provides procedures for drawing sketches, including setting the working directory, starting a new file, drawing the sketch using tools and constraints, and saving. 3. The sketches drawn in the experiments include concentric circles, arcs, and other shapes as shown to practice geometric modeling techniques.

Uploaded by

honeyfunny
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
60 views

Name: Roll No: Sub:: AIM Geometric Modelling

1. The document describes experiments in geometric modeling using Creo software. 2. It provides procedures for drawing sketches, including setting the working directory, starting a new file, drawing the sketch using tools and constraints, and saving. 3. The sketches drawn in the experiments include concentric circles, arcs, and other shapes as shown to practice geometric modeling techniques.

Uploaded by

honeyfunny
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 9

NAME :

ROLL NO :
SUB :

EXPERIMENT N0 : 01

AIM : Introduction To Geometric Modelling

GEOMETRIC MODELLING :
it is important to cad or governing equilibrium equation to
classic engineering fileds as mechanics theramal fliuids

1.intelligent decision on the type of inities necessary to use in a particular model to meet
certain geometric requirement such in slopes and a curvature.

2.interpretation of unexpected result.

3.evaluation of cad and cam system.

4.innnovation use of the to o/s in dart colour application.

5.creation of new attributes of modify the obtained model to benefit new engineering
application.

6.unerstanding of terminology.

GENERAL REQUIREMENT :
1.complete part representation including to logic and geometry data

2.(1) geometry shape

(2) to connecting and associating of the object entities .it determines the relation
information between object entities.

3.it able to transfer data directly from cad to cae and cam

4.support various engineering application such as mass properties mechanics analysis fen
,pem.

5.support various pproperties mechanics analysis fen,pen tool path relation for onc and so on.

BASIC TYPE OF GEOMETRIC MODELLING :


1.2.0 projection
2.wire frame modelling

3.surface modelling

(a) analytical frame

(b) free form curved sculptured surface

4.solid modelling

(a)construction solid modelling (scg)

(b)boundary representation (b-rep)

(c) parametric modelling

WIRE FRAME MODELLING :


1.developed in 1960 and reformed as astic figure or as a representation

2.the word wire frame releated to the fact that are may imagine a wire that a bend to follow
the object to generate a best model

3.model consist of points ,lines,areas,circles and curves.

4.in 3d wireframe model on object is not recorded as a solid instead verticle that contain
edges of the object boundary are recorded as a collection fit their collection

SURFACE MODELLING :
1.a surface model is used as a set of faces

2.a surface model consist of wireframe entities.

3.in general a wireframe model can be balanced of surface entities

4.in shape design,representation of complete objectsuch as car,ship,aeroplane bodies or weld


or casting

5.surface modelling is used to be repeated shape and model are new in to solid model(e.x.
proe,autocad,catai)

SOLID MODELLING:
1.solid modelling technique is based upon the half space concept

2.the boundary of the model separated in intersection and interior of the model object
3.the object is defined by the various volume space contained within the defined of the
object.

4. in general splitting ,a closed boundary is needed to define a solid object.

5.informationary complete solid and unarbitary representation

6.point in space to be classified relative to the object if it is inside ,outside or on the object.

7.improves the quality of design improved visualisation and has potential for function
automoation and integration.

DIFFERENT SOLID MODELLING :


1.constructive soilid gometry

2.surfacing

3.boundary representation

4.feature -barel modelling

-uses technique based

5.primitative instancing –use technique based principle primitive to build object

6.cell decomposition spatial communication active used irregular object /image proximity
medical operation.

RESULT : in this way we studied about geometric modelling.


EXPERIMENT NO :02
AIM : to draw the sketch in the software by using creo software 2.0

Sketch :

GOVERNMENT COLLEGE OF ENGINEERING,CHANDRAPUR


NAME:
ROLL NO.: PRACTICAL BATCH:
SUBJECT: Geometric Modelling SIGN:
SCALE:1:1
PROCEDURE :
1.SETTING THE WORKING DIRECTORY :

1.open set working directory command from the tool bar before move
in to the new file
2.the set working directory dialogie box will be displayed in that
select desktop and create new folder to save the sketch in that
folder.button from file toolbar the new dialogue box displayed select
the sketch dialogue box,the default name of sketch ‘appear’ in the
name edit box.
b.enter ctrl+ult in the name edit box an
c.then drop down directions in which select all files and then click ok.
2.starting new object file
a.cchoose the new d choose ok;you are at the sketcher
environment of the sketch mode
3.drawing the sketch :
1. select sketch command from the tool bar.then,sketch dialogue
box will be displayed.then,select plllane and click on sketch.
2.then,first draw bottom from sketcher tools from toolbar.
3.then,gve direction as given on the sketch on one side of the
sketch.
4.then apply,constraints equal from constraints toolbar
5.then draw two concentric circles at distance 78mm from the
sketcher4 toolbar.
6.edit the dimensions of circle.
7.then draw 3 points by using arc bottom from the sketcher
toolbar
8.by using tangent constraints make one end of the arc tangent to
the circle.
9.make another circle and coincide with the vertical line as ginen
in the sketch
10.then,apply mirror command in the sketcher to mirror the arc
on rightside as it is already down on left side.
11.in this way the skech is completed.
4.saving the sketch
No need to save because you may need this part for further 3D
model.
1.choose the save button from the file toolbar .the save object
dialogue box will be displayed with the sketch that had engtered
earlier.
2.choose ok button;the sketch is saved
3.after saving the sketch .choose window close from menu bar to
close window.
Result:Thus,we have studied to draw sketch in the software by
using CREO parametric 2.0.
EXPERIMENT NO :03
AIM : to draw the sketch in the software by using CREO
software 2.0
Sketch : AIM : to draw the sketch in the software by using CREO
software 2.0
Sketch :

GOVERNMENT COLLEGE OF ENGINEERING,CHANDRAPUR


NAME:
ROLL NO.: PRACTICAL BATCH:
SUBJECT: Geometric Modelling SIGN:
SCALE:1:1
PROCEDURE :
1.setting the working directory
a.open set working directory command from the tool bar before
move in to the new file
b.the set working directory dialogie box will be displayed in that
select desktop and create new folder to save the sketch in that
folder.
button from file toolbar the new dialogue box displayed select the
sketch dialogue box,the default name of sketch ‘appear’ in the
name edit box.
b.enter ctrl+ult in the name edit box an
c.then drop down directions in which select all files and then click
ok.
2.starting new object file
a.cchoose the new d choose ok;you are at the sketcher
environment of the sketch mode
3.drawing the sketch:
1.select sketch command then sktch dialogue box is displayed in
that select front plane where you have to draw sketch
2.then click OK ,after that you will move in to the sketch
environment
3.draw the given sketch by using sketching option and supply
required constraints.
4.saving the sketch
No need to save because you may need this part for further 3D
model.
1.choose the save button from the file toolbar .the save object
dialogue box will be displayed with the sketch that had engtered
earlier.
2.choose ok button;the sketch is saved
3.after saving the sketch .choose window close from menu bar to
close window.
Result:Thus,we have studied to draw sketch in the software by
using CREO parametric 2.0.

You might also like