EN 10152 Grade DC01

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Matmatch is trusted by 2 million+ engineers and product developers each year

This material data has been provided by Matmatch trusted partner WIAM.

Metal Steel Carbon Steel Low Carbon Steel

EN 10152 Grade DC01 skin passed

Description
The cold rolled, electrolytically zinc coated (+ZE) steel DC01 (drawing quality) is suitable for cold
forming of complex profile forms, construction components and molded parts. Weldability is given
when using the normal processes. Application: metal furniture, shaft processing, radiators and
ventilators, the manufacturing of tubes and small profiles and in the automotive industry for complex
body outer and inner parts, wings, side frames, bottom plates, spare wheel wells and door outside
and inner panels

Related Standards

EN Europe EN 10152

Equivalent Materials

ISO CR1 JIS SECD ASTM A1008CSTypeA ASTM CSTypeA DIN St2

DIN St12 DIN St12O3 DIN St12-03 AFNOR C BS CR4 JIS SECC

SS 14-11-42 ASTM CSTypeA-BorC DIN St12ZE AS CA1 IS D

JIS SPCC DIN 1.0330 DIN St 12 DIN St 2 DIN DC01 AFNOR DC01

BS DC01 AISI 1008 SAE 1008 EN 1.0330 ISO HR1 ISO 02

GOST 08kp-3 GB/T LT 02 GB/T U43084 ASTM A366 UNS G10080

Properties
General
Density ρ 7.8 - 7.9 g/cm³ at 20 °C Typical for Low Carbon Steel

Mechanical

Elastic modulus E 200 - 215 GPa at 20 °C Typical for Low Carbon Steel

Elongation A80 A80 28 % at 20 °C

Elongation A80, transverse 24 - 28 % at 20 °C


A80,trans

Poisson's ratio ν 0.29 [-] at 20 °C Typical for Low Carbon Steel

Shear modulus G 75 - 80 GPa at 20 °C Typical for Carbon Steel

Tensile strength Rm 270 - 410 MPa at 20 °C

Tensile strength, transverse 270 - 410 MPa at 20 °C


Rm,trans

Yield strength YS 140 - 280 MPa at 20 °C

Yield strength, transverse 140 - 320 MPa at 20 °C


YStrans

Thermal

Coefficient of thermal 1.32E-5 - 1.38E-5 1/K at 20 °C Typical for Low Carbon Steel
expansion α

Max service temperature Tmax 500 °C Typical for Carbon Steel

Melting point Tm 1480 - 1526 °C Typical for Low Carbon Steel

Electrical

Electrical resistivity ρel 1.43E-7 - 1.74E-7 Ω·m at 20 °C Typical for Carbon Steel

Magnetic

Curie temperature Tc 770 °C Typical for Low Carbon Steel


Chemical properties

Element Weight % Comment

Mn 0.6 %

C 0.12 %

P 0.05 %

S 0.045 %

This material data has been provided by WIAM.


All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be
stricter whereas others may be outside the bounds of the original standard.

You might also like