Festo Mag. Switch PDF

Proximity sensors
Drive accessories
Cylinder sensors
10.2
Switch output contactless or via

reed contacts
Wide range of mounting and

connection options
Heat, welding field and

corrosion resistant designs
Switching status display via LED
Specified types in accordance with

ATEX directive for potentially
explosive atmospheres
www.festo.com/en/ex
2003/10 – Subject to change – Products 2004/2005 1 / 10.2-1

Proximity sensors
Key features
General information
Festo’s proximity sensors are obtain from a single source an magnet, matched to the overall The proximity sensors are adjusted
position sensors specially adapted optimally harmonised system which system and integrated into the mechanically on the cylinder in
and optimised for use with Festo requires only simple mounting piston of the drive unit concerned. question and locked into the desired
cylinders. They are mounted on components for assembly. All drives provided by Festo with the position. As soon as the cylinder
cylinders either directly or by means The proximity sensors operate in designation “A” are equipped with a piston returns to this position, the
of special mounting kits and offer conjunction with a permanent permanent magnet of this kind. switching signal status changes.
users the advantage of being able to
Variants
Inductive proximity sensors SMT
Inductive proximity sensors SMT This change generates a switching mainly in applications where they means of which their switching
consist of an oscillator circuit. signal. are connected to a controller by signals are processed.
Current flowing through this circuit Proximity sensors SMT are used
Drive accessories
Cylinder sensors
changes when a magnetic field

approaches.
Contacting proximity sensors SME

Contacting proximity sensors SME Proximity sensors SME are used electrical consuming devices). In lengths (over approx. 7.5 m), a
10.2 consist of a reed switch whose mainly in applications where it is applications involving large protective circuit ( 1 / 10.2-3)
contacts close when a magnetic necessary to switch high load capacitive loads or long cable must be provided.
field approaches, thus generating a currents (e.g. for the direct control of
switching signal.
Welding field immune proximity sensors SMTSO

Welding field immune proximity switching signal is “frozen” as soon prevents incorrect switching during machines where welding operations
sensors SMTSO work in the same as the proximity sensor detects an welding operations. Proximity generate strong alternating
way as inductive sensors SMT, but alternating magnetic field. This sensors SMTSO are used on welding magnetic fields.
with the additional feature that the
Pneumatic proximity sensors SMPO

Pneumatic proximity sensors SMPO approaches. A pneumatic output switched. Proximity sensors SMPO capable of directly processing
consist of a 3/2-way valve which is signal can be activated when the are used in systems which are pneumatic output signals.
actuated when a magnetic field pneumatic proximity sensor is
Proximity sensors SMH for grippers

Proximity sensors SMH are position signal is generated by the proximity evaluation unit SMH-AE1. This Example:
sensors which have been specially sensor in proportion to the strength evaluation unit is essential when a Two of the switching points can be
developed for use with Festo mini of the magnetic field, and is proximity sensor SMH is used. It set in such a way that 2 objects of
and precision grippers. A magnet converted into digital signals by the allows 3 switching points to be set different sizes can be detected. The
integrated into the piston of the electronic evaluation unit. Proximity independently by means of third switching point can be used to
gripper generates a magnetic field sensors SMH allow 3 gripper jaw potentiometers and tapped as detect a fault (no object in gripper).
whose strength varies as a function positions to be detected with only electrical signals at the 5-pin
of distance. An analogue electrical one sensor and the associated M12 plug.
1 / 10.2-2 Products 2004/2005 – Subject to change – 2003/10

Proximity sensors
Key features
Protective circuit for contacting proximity sensors SME

Inductive loads
When inductive loads are switched, series (e.g. relay, contactor, etc.).
a high voltage peak is produced at If a relay or auxiliary contactor is
the moment of switch-off. For this switched, allowance must be made Inductance
reason, proximity sensors must be for the technical data of the
provided with a protective circuit. proximity sensor and of the relay or
The protective circuit can consist auxiliary contactor. Diode or varistor
either of an appropriate diode or With R-C circuits, there is no need
varistor ( circuit diagram). for an additional resistor to protect
The electrical values of these against inductive loads.
components depend on the power
component which is connected in
Capacitive loads
Drive accessories
Cylinder sensors
When inductive loads are switched installed in the power supply line
or cables longer than approx. 7.5 m (brown cable) as close as possible to
Capacitor
are used, a high current peak occurs the proximity sensor. This protective
at the moment of switch-on. These resistor reduces the load current I.
current peaks can lead to severe Ensure therefore during sizing that
Resistor
damage to mechanical switching the minimum current necessary for
10.2
devices. For this reason, proximity reliable status detection is available
sensors must be provided with a (allow for the technical data of the
protective circuit. connected load).
To protect against current peaks, a
protective resistor R must be
-H- Note
The pick-up current rating of a relay Cylinders with magnetically The distance between a proximity
or auxiliary contactor is much higher actuated proximity sensors should sensor and the nearest outer wall of
(8 to 10 times higher) than the not be installed in places where a cylinder with a permanent magnet
holding power rating. For this strong magnetic fields integrated in the piston must be at
reason, controller sizing should be (e.g. resistance welding machines) least 100 mm if no special
based primarily on the pick-up are present. Welding field immune screening is used.
power rating. proximity sensors SMTSO should be
used instead.

Proximity sensors
Selection aid
Drive Remarks SMT-8 SMT-10 SMTO-4U SMTO-1 SMT-3 SMH-S1

CRSMT-8 SME-10 SMEO-4U SMTO-6 SME-3
SME-8 CRSMEO-4 SMEO-1
SMPO-8 SMPO-1
Standards-based cylinders
Standard cylinders DSNU, ESNU ∅ 8 … 25 mm -U - Type
yp –
Standard cylinders DSN, ESN ∅ 8 … 25 mm Discontinued
Di ti d –
Standard cylinders DNCB – – – –
Standard cylinders DNC – – – –
Standard cylinders DNG – – – –
Standard cylinders DNU – – – –
Standard cylinders ADN – – – –
Piston cylinders
Compact cylinders ADVU, AEVU – – – -U - Type
yp –
Drive accessories
Discontinued
Di ti d
Cylinder sensors
Short-stroke cylinders
y ADVC,, AEVC ∅ 6 … 25 mm – – – –
∅ 32 … 100 mm – – – –
Flat cylinders EZH-10/40-40-A-B – – – –
Flat cylinders DZF – – – –
Flat cylinders
y DZH ∅ 16 … 25 mm – – – –
∅ 32 … 63 mm – – – –
10.2 ∅ 32 … 63 mm
Round cylinders DSNU, ESNU –
Round cylinders DSW, ESW –
Round cylinders DSEU, ESEU –
Multimount cylinders DMM, EMM – – – –
Round cylinders CRDG – – – –
Round cylinders CRDSW –
Standard cylinders CRHD – – – –
Standard cylinders CRDSNU – – – –
Standard cylinders CRDNG – – – –
Standard cylinders CRDNGS – – – –
Rodless cylinders
Linear drives DGC – – – -U - Type
yp –
Linear drives DGP, DGPL – – – Discontinued
Di ti d –
Linear drives SLG – – – –
Linear drives DGO – – – –
Linear drives SLM – – – –
Semi-rotary drives
Swivel modules DSM ∅ 6 … 10 mm – – – -U - Type
yp –
Semi-rotaryy drives DRQ
Q ∅ 16 … 32 mm – – – Discontinued
Di ti d –
∅ 40 … 100 – – – –
Semi-rotaryy drives DRQD
Q ∅ 6 … 12 mm – – – –
∅ 16 … 32 mm – – – –
Technical data Page 1 / 10.2-6 1 / 10.2-42 1 / 10.2-58 1 / 10.2-72 1 / 10.2-90 1 / 10.2-98

Proximity sensors
Selection aid
Drive Remarks SMT-8 SMT-10 SMTO-4U SMTO-1 SMT-3 SMH-S1

CRSMT-8 SME-10 SMEO-4U SMTO-6 SME-3
SME-8 CRSMEO-4 SMEO-1
SMPO-8 SMPO-1
Function-oriented drives
Stopper cylinders STA, STAF – – – -U - Type
yp –
Linear/swivel clamps CLR – – – Discontinued
Di ti d –
Swivel/linear units DSL – – – –
Drives with linear guide

Mini slides SLS, SLF, SLT – – – -U - Type
yp –
Twin cylinders SPZ – – – Discontinued
Di ti d –
Slide units SLZ – – – –
Guided cylinders
y DFP ∅ 6 … 16 mm – – – –
∅ 25 … 80 mm – – – –
Drive accessories
Cylinder sensors
Mini guided drive units DFC – – – –
Guided drive units DFM – – – –
Linear units SLE ∅ 32 … 50 mm – – – –
Twin cylinders DPZC – – – –
Twin cylinders DPZ – – – –
Handling units
10.2
Linear modules HMP – – – -U - Type
yp –
Linear modules HMPL – – – Discontinued
Di ti d –
Handling modules HSP – – – –
Feed separators HPV – – – –
Three-point grippers HGD ∅ 32, 50 mm – – – –
Parallel grippers
g pp HGP ∅ 6 mm – – – –
∅ 10 … 35 mm – – – –
Precision parallel grippers HGPP ∅ 12 … 32 mm – – – –
T-slot grippers HGPT ∅ 16 … 63 mm – – – –
Three-point grippers HGD ∅ 16 mm – – – –
Angle
g grippers
g pp HGW ∅ 10 mm – – – –
∅ 16 … 40 mm – – – –
Radial ggrippers
pp HGR ∅ 10 mm – – – –
∅ 16 … 40 mm – – – –
Cushioning components
Stop elements YSRWJ -U - Type
– – – Discontinued –
Electrical positioning systems

Toothed belt axes DGE-ZR – – – -U - Type
yp –
Spindle axes DGE-SP – – – Discontinued
Di ti d –
System components
Heavy-duty guides HD -U - Type
Actuators
Copac linear actuators DLP-A -U - Type
Technical data Page 1 / 10.2-6 1 / 10.2-42 1 / 10.2-58 1 / 10.2-72 1 / 10.2-90 1 / 10.2-98

-V- New
Proximity sensors for slot type 8

Product range overview
Measuringg Design
g Type
yp Mountingg Switching element function Switch output
p Electrical connection
principle NO contact NC contact Cable Plug
Magneto-
g Operating voltage range 10 … 30 V DC
resistive SMT-8F Insertable from PNP 3-wire –

-V- New above
– M8x1, 3-pin
–
– M12x1, 3-pin
–
NPN 3-wire M8x1, 3-pin

–
– 2-wire –
–
SMT-8 Insertable from end, PNP 3-wire M8x1, 3-pin

–
Drive accessories
flush with the

Cylinder sensors
cylinder profile NPN 3-wire M8x1, 3-pin

–
CRSMT-8 PNP 3-wire –

Corrosion –
resistant
10.2
SMT-8-SL Insertable from end PNP – M8x1, 3-pin
-V- New –
SMTO-8E With accessories PNP – M8x1, 3-pin

–
PNP – M12x1, 3-pin

–
NPN – M8x1, 3-pin

–
– M12x1, 3-pin
–
SMTSO-8E PNP – M12x1, 3-pin

Welding field –
immune
NPN – M12x1, 3-pin
–

-V- New

Type
yp Connection direction Replacement
p without Switchingg status Free of copper
pp and Page
g
In-line Lateral re-adjustment display with LED Teflon
Operating voltage range 10 … 30 V DC
SMT-8F 1 / 10.2-13
– –
-V - New
– –
– –
– –
– –
SMT-8 1 / 10.2-19
– –
Drive accessories
Cylinder sensors
– –
CRSMT-8 1 / 10.2-21
Corrosion – –
resistant
10.2
SMT-8-SL 1 / 10.2-23
-V - New – –
SMTO-8E 1 / 10.2-31
–
–
– –
– –
SMTSO-8E 1 / 10.2-33
Welding field – –
immune
– –

-V- New

Measuringg Design
g Type
Magnetic
g Operating voltage range 0 … 30 V AC/DC
reed SME-8F Insertable from Contacting 3-wire –

-V- New above
2-wire M8x1, 3-pin
–
SME-8 Insertable from end, Contacting 3-wire –

flush with the
cylinder profile 2-wire M8x1, 3-pin
–
SME-8-…-S6 2-wire –
Heat resistant up –
to 120 °C
Drive accessories
Cylinder sensors
SME-8-SL Insertable from end Contacting – M8x1, 3-pin

-V- New –
SMEO-8E With accessories Contacting – M8x1, 3-pin

–
10.2
– M12x1, 3-pin
–
SMEO-8E-…-S6 2-wire –
to 120 °C
Operating voltage range 3 … 250 V AC/DC

SME-8-…-230 Insertable from end, Contacting 2-wire –
flush with the –
cylinder profile
SMEO-8E-…-230 With accessories Contacting – M12x1, 2-pin
–
Pneumatic Operating pressure 2 … 8 bar

SMPO-8E With accessories – – –
1) –
1) 3/2-way valve, normally closed

-V- New

Type
pp and Page
g
SME-8F 1 / 10.2-16
– –
-V - New
– –
SME-8 1 / 10.2-25
– –
– –
SME-8-…-S6
Heat resistant up – – – –
to 120 °C
Drive accessories
Cylinder sensors
SME-8-SL 1 / 10.2-28
-V - New – – –
SMEO-8E 1 / 10.2-35
– –
10.2
– –
SMEO-8E-…-S6
Heat resistant up – – –
to 120 °C

SME-8-…-230 1 / 10.2-25
– – –
SMEO-8E-…-230 1 / 10.2-35
– –
Operating pressure 2 … 8 bar

SMPO-8E 1 / 10.2-38
– – 2) –
2) Switching status is indicated by means of an LED.

Peripherals overview
aH
1 aI
aC
Drive accessories
8
Cylinder sensors
2
9
bJ
10.2
aJ 3 aD
aA bA
5
aE
8
9
aA
bB
aJ
8
aF
aB
aG

Mounting attachments and accessories

Brief description Page
Proximity sensors
1 SMT-8F-…-OE Magneto-resistive, with cable 1 / 10.2-13
SME-8F-…-OE Magnetic reed, with cable 1 / 10.2-16
2 SMT-8F-…-M8D/M12 Magneto-resistive, with cable and plug M8x1 or M12x1 1 / 10.2-13
SME-8F-…-M8D/M12 Magnetic reed, with cable and plug M8x1 or M12x1 1 / 10.2-16
3 SMT-8-SL-… Magneto-resistive, with plug M8x1 1 / 10.2-23
SME-8-SL-… Magnetic reed, with plug M8x1 1 / 10.2-28
4 SMT-8-K-… Magneto-resistive, with cable 1 / 10.2-19
CRSMT-8-K-… Magneto-resistive, corrosion resistant, with cable 1 / 10.2-21
SME-8-K-… Magnetic reed, with cable 1 / 10.2-25
5 SMT-8-S-… Magneto-resistive, with cable and plug M8x1 1 / 10.2-19
SME-8-S-… Magnetic reed, with cable and plug M8x1 1 / 10.2-25
6 SMTO-8E-… Magneto-resistive, with plug M8x1 or M12x1 1 / 10.2-31
Drive accessories
Cylinder sensors
SMTSO-8E-… Magneto-resistive, welding field immune, with plug M8x1 or M12x1 1 / 10.2-33
SMEO-8E-… Magnetic reed, with cable or with plug M8x1 or M12x1 1 / 10.2-35
7 SMPO-8E-… Pneumatic 1 / 10.2-38
Accessories
8 Plug socket with cable SIM-M8-3GD-… Straight socket, M8x1, 3-pin 1 / 10.2-108
9 Plug socket with cable SIM-M8-3WD-… Angled socket, M8x1, 3-pin 1 / 10.2-108
10.2
aJ Plug socket with cable SIM-M12-3GD-… Straight socket, M12x1, 3-pin 1 / 10.2-108
aA Plug socket with cable SIM-M12-3WD-… Angled socket, M12x1, 3-pin 1 / 10.2-108
aB Push-in fitting QSM-M5 For standard O.D. tubing to CETOP RP 54 P 1 / 10.2-41
aC Mounting kit SMBR For round cylinders DSEU, ESEU, DSNU, ESNU, DSW, ESW 1 / 10.2-40
aD Mounting kit CRSMB Corrosion resistant, for round cylinders 1 / 10.2-40
aE Mounting kit SMB-8-FENG For standard cylinders DNC, DNCB in combination with guide unit FENG 1 / 10.2-41
aF Mounting kit SMB-8E For drives with slot type 8 1 / 10.2-41
aG Sensor tester SM-TEST-1 1 / 10.2-107
Drives
aH Drives with slot type 8 (T-slot) –
aI Round cylinders ∅ 8 … 63 mm
bJ Round cylinders ∅ 32 … 100 mm
bA Standard cylinders DNC, DNCB In combination with guide unit FENG
bB Drives with slot type 8 (T-slot)

-V- New
Proximity sensors SMT/SME-8F, for slot type 8

Type code
SMT — 8F — PO — 24V — K7,5 — OE — —
Type
SMT Proximity sensor, magneto-resistive
SME Proximity sensor, magnetic reed
Design
8F For T-slot, inserted from above
Switching element function, switch output

PS NO contact, 3-wire, PNP
PO NC contact, 3-wire, PNP
NS NO contact, 3-wire, NPN
ZS NO contact, 2-wire
Drive accessories
DS NO contact, 3-wire
Cylinder sensors
DO NC contact, 3-wire
Rated operating voltage

24V 24 V DC
10.2 Cable length

K0,3 0.3 m
K2,5 2.5 m
K5,0 5.0 m
K7,5 7.5 m
Electrical connection
OE Cable
M8D Plug M8x1 with cable
M12 Plug M12x1 with cable
Explosion protection
EX Certification acc. to ATEX directive
Packaging unit
X Quantity of 50

-V- New
Proximity sensors SMT-8F, for slot type 8

Technical data – Magneto-resistive measuring principle
Function
NO contact, PNP, with cable NO contact, PNP, with plug
BN + BN +
BK RL BK RL
PNP BU – PNP BU –
NO contact, NPN, with cable NO contact, NPN, with plug

BN + BN +
NPN BK NPN BK
BU RL BU RL
– –
NO contact, with 2-wire cable NC contact, PNP, with cable

BN RL BN +
+/–
BU BK RL
–/+
PNP BU
–
Drive accessories
Cylinder sensors
General technical data
Switching element function NO contact NC contact
Electrical data
Switch output PNP NPN – PNP
Electrical connection Cable, 3-wire Cable with Cable with Cable, Cable with Cable, Cable,
plug M8x1, plug 3-wire plug M8x1, 2-wire 3-wire 10.2
3-pin M12x1, 3-pin
3-pin
Operating voltage range [V DC] 10 … 30
Max. output current [mA] 100
Max. switching capacity [W] 3
Voltage drop [V] 1.8 1.8 5.6 1.8
Residual current [mA] 0.1 0.1 0.8 0.1
Protection against short circuit Yes
Protection against polarity reversal For all electrical connections
Protection class to EN 60 529 IP65/IP67
CE symbol 89/336/EEC (EMC) Yes
Design
Design For T-slot
Type of mounting Clamped in T-slot, insertable from above
Reproducibility of switching point1) [mm] ±0.1
Switch-on time [ms] 0.2 0.2 1.6 0.5
Switch-off time [ms] 11 7 1.6 11
Switching status display Yellow LED
Cable length [m] 2.5 5.0 0.3 0.3 2.5 0.3 2.5 7.5
Mounting position Any
Materials Housing Polyamide
Cable sheath Polyurethane
Note on material Free of copper and Teflon
Product weight [g] 30 90 10 20 30 10 24 90
1) Only applicable to drives secured against rotation

-V- New

Operating and environmental conditions

Electrical connection Cable, 3-wire Cable, 2-wire Plug
Cable installation Fixed Flexible Fixed Flexible Fixed Flexible
Ambient temperature [°C] –20 … +60 –5 … +60 –25 … +70 –5 … +70 –20 … +60 –5 … +60
Corrosion resistance class CRC1) 4 4 2
1) Corrosion resistance class 2 according to Festo standard 940 070

Components requiring moderate corrosion resistance. Externally visible parts with primarily decorative surface requirements which are in direct contact with a surrounding industrial atmosphere or media such as
cooling or lubricating agents.
Corrosion resistance class 4 according to Festo standard 940 070
Components requiring higher corrosion resistance. Parts used with aggressive media, e.g. food or chemical industry. These applications should be supported with special tests with the media if required.
Dimensions Download CAD data www.festo.com/en/engineering

With cable
Drive accessories
Cylinder sensors
1 Connecting cable
10.2 3 Clamping component
4 Yellow LED
With plug M8
1 Connecting cable
2 Plug suitable for plug socket
with cable SIM-M8-…
3 Clamping component
4 Yellow LED
With plug M12
1 Connecting cable
4 Yellow LED

-V- New

Ordering data
Switch output
p Electrical connection Cable length Part No. Type
yp PU1)
Cable Plug M8 Plug M12 [m]
NO contact
PNP 3-wire
3 – – 2.55 525 898 SMT-8F-PS-24V-K2,5-OE 1
535 199 SMT-8F-PS-24V-K2,5-OE-X 50
5.0 538 486 SMT-8F-PS-24V-K5,0-OE 1
– 3-pin
3 p – 0.33 525 899 SMT-8F-PS-24V-K0,3-M8D 1
535 200 SMT-8F-PS-24V-K0,3-M8D-X 50
– 3-pin 525 900 SMT-8F-PS-24V-K0,3-M12 1
NPN 3-wire – – 2.5 525 909 SMT-8F-NS-24V-K2,5-OE 1
– 3-pin – 0.3 525 910 SMT-8F-NS-24V-K0,3-M8D 1
– 2-wire – – 2.5 525 908 SMT-8F-ZS-24V-K2,5-OE-EX 1
NC contact
Drive accessories
Cylinder sensors
PNP 3-wire – – 7.5 525 911 SMT-8F-PO-24V-K7,5-OE 1
1) Packaging unit quantity
10.2
Core Range

-V- New
Proximity sensors SME-8F, for slot type 8

Technical data – Magnetic reed measuring principle
Function
NO contact, with 3-wire cable NO contact, with 2-wire cable
BN +/– BN RL
BK RL +/~
BU –/~
BU –/+
NO contact, 3-wire, with plug NC contact, with 3-wire cable

BN +/– BN
RL +/–
BK BK RL
BU –/+ BU –/+

Electrical data
Switch output Contacting, bipolar
Drive accessories
Cylinder sensors
Electrical connection Cable, 3-wire Cable, 3-wire Cable with Cable, 2-wire Cable, 3-wire
plug M8x1, 3-pin
Operating
p g voltage
g D.C. voltage [V DC] 10 … 30 5 … 30 10 … 30
range A.C. voltage [V AC] 10 … 30 5 … 30 10 … 30
Max. output current [mA] 500 100 80
Max. switchingg D.C. voltage [W] 10 3 1.5
10.2
capacity A.C. voltage [VA] 10 3 1.5
Voltage drop [V] 3.5 4
Protection against short circuit No
Protection against polarity reversal No For all electrical No
connections
Design
Design For T-slot
Type of mounting Clamped in T-slot, inserted from above
Switch-on time [ms] 0.5 0.6 2
Switch-off time [ms] 0.03 0.05 0.2
Cable length [m] 2.5 5.0 0.3 2.5 7.5
Product weight [g] 30 60 10 27

Electrical connection Cable Plug
Cable installation Fixed Flexible Fixed Flexible
Ambient temperature [°C] –20 … +60 –5 … +60 –20 … +60 –5 … +60
Corrosion resistance class CRC1) 4 2


-V- New


With cable
1 Connecting cable
4 Yellow LED
With plug M8
Drive accessories
Cylinder sensors
1 Connecting cable
10.2
4 Yellow LED
With plug M12
1 Connecting cable
4 Yellow LED
Ordering data
Electrical connection Cable length Part No. Type
yp PU1)
Cable Plug M8 [m]
NO contact
33-wire – 2.55 525 895 SME-8F-DS-24V-K2,5-OE 1
535 197 SME-8F-DS-24V-K2,5-OE-X 50
5.0 525 897 SME-8F-DS-24V-K5,0-OE 1
– 3-pin
3 p 0.33 525 896 SME-8F-DS-24V-K0,3-M8D 1
535 198 SME-8F-DS-24V-K0,3-M8D-X 50
2-wire – 2.5 525 907 SME-8F-ZS-24V-K2,5-OE 1
NC contact
3-wire – 7.5 525 906 SME-8F-DO-24V-K7,5-OE 1
Core Range

Proximity sensors SMT/SME-8, for slot type 8
Type code
SMT — 8 — — PS — K — LED — 24 — — B —
Type
CRSMT Proximity sensor, magneto-resistive,
corrosion resistant
Design
8 For T-slot, insertable from end
SL Plug-in housing longitudinally attached
Drive accessories

Cylinder sensors

O NC contact, 3-wire
Electrical connection, cable length

10.2 K Cable, 2.5 m or 7.5 m
K2,5 Cable, 2.5 m
K5 Cable, 5.0 m
KL Cable, 2.5 m
S Plug M8x1 with cable, 0.3 m
Switching status display

LED Yellow LED

24 24 V DC
230 230 V AC
Variant
S6 Heat resistant
Generation
Series A
B Series B
Packaging unit
X Quantity of 50

Proximity sensors SMT-8, for slot type 8
Function
BN + BN +
BK RL BK RL

BN + BN +
NPN BK NPN BK
BU RL BU RL
– –

Switching element function NO contact
Electrical data
Switch output PNP NPN
Drive accessories
Cylinder sensors
Electrical connection Cable, 3-wire Cable, 3-wire Cable with plug Cable, 3-wire Cable with plug
M8x1, 3-pin M8x1, 3-pin
Voltage drop [V] 1.8
10.2
Residual current [mA] 0.01
Design
Design For T-slot
Type of mounting Clamped in T-slot, insertable from end, flush with the cylinder profile
Switch-on time [ms] 0.2
Switch-off time [ms] 0.5
Cable length [m] 2.5 5.0 0.3 2.5 0.3
Materials Housing Polyurethane
Product weight [g] 30 60 10 30 10

Electrical connection Cable, 3-wire Cable with plug



With cable
1 Connecting cable
2 Yellow LED
With plug M8
1 Connecting cable
2 Yellow LED
Drive accessories
Cylinder sensors
Ordering data
Switch output
yp PU1)
Cable Plug M8 [m]
10.2 NO contact
PNP 3-wire
3 – 2.5 175 436 SMT-8-PS-K-LED-24-B 1
5.0 175 434 SMT-8-PS-K5-LED-24-B 1
– 3-pin
3 p 0.3
3 175 484 SMT-8-PS-S-LED-24-B 1
535 196 SMT-8-PS-S-LED-24-B-X 50
NPN 3-wire – 2.5 171 180 SMT-8-NS-K-LED-24-B 1
– 3-pin 0.3 171 181 SMT-8-NS-S-LED-24-B 1

Proximity sensors CRSMT-8, for slot type 8
Function
NO contact, PNP, with cable, corrosion
resistant
BN +
BK RL
PNP BU –

Electrical data
Electrical connection Cable, 3-wire Cable, 3-wire
Drive accessories
Cylinder sensors
Switch output PNP
10.2
Design
Design For T-slot
Cable length [m] 2.5 5.0
Product weight [g] 30 60

Electrical connection Cable, 3-wire
Cable installation Fixed Flexible
Ambient temperature [°C] –20 … +60 –5 … +60
Corrosion resistance class CRC1) 4


Proximity sensors CRSMT-8, for slot type 8

With cable
1 Connecting cable
2 Yellow LED
Ordering data
Switch output
yp
Cable [m]
NO contact
PNP 3-wire
3 2.5 525 563 CRSMT-8-PS-K2,5-LED-24
5.0 525 564 CRSMT-8-PS-K5-LED-24
Drive accessories
Cylinder sensors
10.2

-V- New
Proximity sensors SMT-8-SL, for slot type 8

Function
NO contact, PNP, with plug
BN +
BK RL
PNP BU –

Electrical data
Switch output PNP
Drive accessories
Cylinder sensors
Electrical connection Plug M8x1, 3-pin
10.2
Design
Design For T-slot
Type of mounting Clamped in T-slot, insertable from end
Product weight [g] 5

Electrical connection Plug M8
Ambient temperature [°C] –25 … +70


-V- New
Proximity sensors SMT-8-SL, for slot type 8


With plug M8

2 Yellow LED
Drive accessories
Cylinder sensors
4 Theoretical switching point
5 Installation space for socket
SIM-M8-3WD
10.2 SIM-M8-3GD
Ordering data
Switch output
yp
Plug M8 [m]
NO contact
PNP 3-pin – 531 145 SMT-8-SL-PS-LED-24

Proximity sensors SME-8, for slot type 8
Function
NO contact, with 3-wire cable NO contact, with 2-wire cable1)
BN +/– BN RL
+/–/~
BK RL BU –/+/~
BU –/+
1) e. g. heat resistant
NO contact, 3-wire, with plug NC contact, with 3-wire cable

BN +/– BN +/–
BK RL BK RL
BU –/+ BU –/+

Electrical data
Drive accessories
Cylinder sensors
Electrical connection Cable, Cable, Cable with Cable, Cable, Cable, Cable,
3-wire 3-wire plug M8x1, 2-wire 2-wire 2-wire1) 3-wire
3-pin
Operating
p g D.C. voltage [V DC] 12 … 30 12 … 27 3 … 250 0 … 30 12 … 30
voltage range A.C. voltage [V AC] – – 3 … 250 0 … 30 12 … 30
Max. output
p D.C. voltage [mA] 500 80 120 500 50
10.2
current A.C. voltage [mA] – – 200 – 50
Max. switchingg D.C. voltage [W] 10 2 10 10 1.5
capacity A.C. voltage [VA] – – 10 – –
Voltage drop [V] – – – – 1.8
Protection against polarity reversal No Yes2) Yes No
Protection class to EN 60 529 IP65/IP67 IP67
CE symbol
y 89/336/EEC (EMC) Yes Yes Yes Omitted Yes
73/23/EEC (low voltage) Omitted Omitted Yes Omitted Omitted
Design
Design For T-slot
Switch-on time [ms] 0.5 0.5 2
Switch-off time [ms] 0.03 0.5 0.2
Switching status display Yellow LED –
Cable length [m] 2.5 5.0 0.3 2.5 2.5 2.5 7.5
Materials Housing Polyester
Cable sheath Polyurethane Polyvinyl Polyurethane
chloride
Note on material Free of copper and Teflon –
Product weight [g] 30 60 8 24 40 50 85
1) Heat-resistant design
2) Without LED function


Electrical connection Cable Cable, heat resistant Cable with plug
Cable installation Fixed Flexible Fixed Flexible Fixed Flexible
Ambient temperature [°C] –20 … +60 –5 … +60 –40 … +120 –5 … +120 –20 … +60 –5 … +60


NO contact with cable
Drive accessories
Cylinder sensors
1 Connecting cable
2 Yellow LED
10.2 NC contact with cable
1 Connecting cable
2 Yellow LED
Operating voltage range 3 … 250 V DC/AC
1 Connecting cable
2 Yellow LED
With plug M8
1 Connecting cable
4 Yellow LED

Ordering data
yp PU1)
Cable Plug M8 [m]
NO contact
33-wire – 2.55 150 855 SME-8-K-LED-24 1
535 194 SME-8-K-LED-24-X 50
5.0 175 404 SME-8-K5-LED-24 1
– 3-pin
3 p 0.33 150 857 SME-8-S-LED-24 1
535 195 SME-8-S-LED-24-X 50
2-wire – 2.5 171 169 SME-8-ZS-KL-LED-24 1
Heat resistant up to 120 °C

2-wire – 2.5 161 756 SME-8-K-24-S6 1
Drive accessories
Cylinder sensors
2-wire – 2.5 152 820 SME-8-K-LED-230 1
NC contact
3-wire – 7.5 160 251 SME-8-O-K-LED-24 1
1) Packaging unit quantity 10.2
Core Range

-V- New
Proximity sensors SME-8-SL, for slot type 8

Function
NO contact, 3-wire, with plug
BN +/–
BK RL
BU –/+

Electrical data
Drive accessories
Cylinder sensors

Voltage drop [V] –
10.2
Protection against polarity reversal No
Design
Design For T-slot
Type of mounting Clamped in T-slot, insertable from end
Materials Housing PA

Electrical connection Plug M8


-V- New
Proximity sensors SME-8-SL, for slot type 8


With plug M8

2 Yellow LED
Drive accessories
Cylinder sensors
SIM-M8-3WD
SIM-M8-3GD 10.2
Ordering data
yp
Plug M8 [m]
NO contact
3-pin – 526 622 SME-8-SL-LED-24

Proximity sensors SMTO/SMEO-8E, for slot type 8
Type code
SMTO — 8E — PS — M12 — LED — 24 —
Type
SMTO Proximity sensor, magneto-resistive
SMTSO Proximity sensor, magnetic reed, welding
field immune
SMEO Proximity sensor, magnetic reed
SMPO Proximity sensor, pneumatic
Design
8E For T-slot, with accessories

Drive accessories

Cylinder sensors

K Cable, 2.5 m or 7.5 m
S Plug M8x1
M12 Plug M12x1
10.2
LED Yellow LED

24 24 V DC
230 230 V AC
Variant
S6 Heat resistant

Proximity sensors SMTO-8E, for slot type 8
Function
BN +
BK RL
PNP BU –
NO contact, NPN, with plug

BN +
NPN BK
BU RL
–

Electrical data
Drive accessories
Cylinder sensors
Electrical connection Plug M8x1, 3-pin Plug M12x1, 3-pin Plug M8x1, 3-pin Plug M12x1, 3-pin
10.2
Design
Design For T-slot
Type of mounting With accessories
Switch-off time [ms] 25

Electrical connection Plug


Proximity sensors SMTO-8E, for slot type 8

With plug M8

2 Yellow LED
3 Mounting screw
Drive accessories
5 Mounting kit SMB-8E

Cylinder sensors

SIM-M8-3WD
SIM-M8-3GD
10.2
With plug M12

2 Yellow LED
3 Mounting screw
SIM-M12-3WD
SIM-M12-3GD
Ordering data
Switch output
yp
Plug M8 Plug M12 [m]
NO contact
PNP 3-pin – – 171 178 SMTO-8E-PS-S-LED-24
– 3-pin – 171 179 SMTO-8E-PS-M12-LED-24
NPN 3-pin – – 171 166 SMTO-8E-NS-S-LED-24
– 3-pin – 171 176 SMTO-8E-NS-M12-LED-24

Proximity sensors SMTSO-8E, for slot type 8
Function
NO contact, PNP, with plug NO contact, NPN, with plug
Welding field immune Welding field immune
BN + BN +
BK RL NPN BK
BU BU RL
PNP – –

Electrical data
Drive accessories
Cylinder sensors
10.2
Resistance to interference from magnetic fields Alternating magnetic field 45 … 65 Hz
Design
Design For T-slot
Switch-on time [ms] 38



Proximity sensors SMTSO-8E, for slot type 8

With plug M12
Drive accessories
Cylinder sensors
10.2
1 Yellow LED
SIM-M12-3GD
Ordering data
Switch output
yp
Plug M12 [m]
NO contact
Welding field immune
PNP 3-pin
3 p – 191 986 SMTSO-8E-PS-M12-LED-24
NPN 175 825 SMTSO-8E-NS-M12-LED-24

Proximity sensors SMEO-8E, for slot type 8
Function
NO contact, 3-wire, with plug NO contact, with 2-wire cable1)
BN +/– BN RL
BK RL +/–
BU –/+
BU –/+
NO contact, 2-wire, with plug

BN RL
+/~
BU
–/~

Electrical data
Drive accessories
Cylinder sensors
Electrical connection Plug M8x1, 3-pin Plug M12x1, 3-pin Plug M12x1, 2-pin Cable, 2-wire1)
Operating
p g D.C. voltage [V DC] 12 … 30 12 … 30 3 … 250 0 … 30
voltage range A.C. voltage [V AC] – – 3 … 230 –
Max. output
p D.C. voltage [mA] 500 120 500
current A.C. voltage [mA] – 120 –
Max. switchingg D.C. voltage [W] 10
10.2
capacity A.C. voltage [VA] – 10 –
Voltage drop [V] – 3.9 –
Protection against polarity reversal No Yes2) Yes
CE symbol
y 89/336/EEC (EMC) Yes Yes Omitted
73/23/EEC (low voltage) Omitted Yes Omitted
Design
Design For T-slot
Switch-on time [ms] 0.5 2 0.5
Switching status display Yellow LED –
Cable length [m] – – – 2.5
Cable sheath – Polyurethane
2) Without LED function

Electrical connection Cable, heat resistant Plug
Cable installation Fixed Flexible –
Ambient temperature [°C] –20 … +120 –5 … +120 –20 … +60



With plug M8

2 Yellow LED
3 Mounting screw
Drive accessories

Cylinder sensors

SIM-M8-3WD
SIM-M8-3GD
10.2
With plug M12

2 Yellow LED
3 Mounting screw
SIM-M12-3WD
SIM-M12-3GD


Drive accessories
Cylinder sensors
1 Connecting cable
3 Mounting screw
10.2
Ordering data
yp
Cable Plug M8 Plug M12 [m]
NO contact
– 3-pin – – 171 163 SMEO-8E-S-LED-24
– – 3-pin – 171 164 SMEO-8E-M12-LED-24

2-wire – – 2.5 171 158 SMEO-8E-K-S6

– – 2-pin – 171 160 SMEO-8E-M12-LED-230

Proximity sensors SMPO-8E, for slot type 8
Technical data – Pneumatic measuring principle
Function
3/2-way valve,
normally closed

Switching element function 3/2-way valve, normally closed
Design
Design For T-slot
Drive accessories
Cylinder sensors

Operating medium Compressed air, filtered, unlubricated, grade of filtration 40 µm
Operating pressure [bar] 2…8
10.2
Switching status display Visual
Pneumatic connection Female thread M5
Materials Housing Polyamide, aluminium
Electrical data
Protection class to EN 60 529 IP65
CE symbol 89/336/EEC (EMC) Omitted



Proximity sensors SMPO-8E, for slot type 8
Drive accessories
Cylinder sensors
1 Connecting thread M5
2 Pneumatic indicator
3 Mounting screw
10.2
Ordering data
Pneumatic connection Part No. Type
3/2-way valve, normally closed
Female thread M5 178 563 SMPO-8E

Accessories
Mounting kit SMBR
Material:
Polyacetate
1 Proximity sensor SM…8

2 Guide slot for cable
Dimensions and ordering data

For piston ∅ B1 B2 B3 H1 Part No. Type
8 18.9 12.3 7 17.5 175 091 SMBR-8-8
10 20.4 13.7 7 19.9 175 092 SMBR-8-10
Drive accessories
Cylinder sensors
12 22.7 14.3 7 21.9 175 093 SMBR-8-12

16 26.1 17.1 7 25.7 175 094 SMBR-8-16
20 33.2 20.8 9 30.4 175 095 SMBR-8-20
25 36.5 22.6 9 35.6 175 096 SMBR-8-25
32 41.7 24.6 9 42.7 175 097 SMBR-8-32
40 47.1 26.5 9 50.7 175 098 SMBR-8-40
10.2
50 56.4 28.6 9 61.5 175 099 SMBR-8-50
63 69.4 32 9 74.5 175 100 SMBR-8-63
Mounting kit CRSMB
Material:
Housing: Polyurethane
Rail: Hard anodised aluminium
Free of copper and Teflon

For piston ∅ Part No. Type
32 … 100 525 565 CRSMB-8-32/100
-H- Note
The mounting kit is secured to the
cylinder using the double-sided
adhesive tape provided.
Core Range

Accessories
Mounting kit SMB-8-FENG
Material:
Wrought aluminium alloy
1 Set screw

For piston ∅ B1 B2 D1 L1 Tightening torque Part No. Type
[Nm]
32/40 35.1 8.7 M3 15.5 0.2 175 705 SMB-8-FENG-32/40
Drive accessories
Cylinder sensors
50/63 47 12.3 M4 20 0.5 175 706 SMB-8-FENG-50/63
80/100 64.3 15.7 M5 24.3 0.7 175 707 SMB-8-FENG-80/100
Mounting kit SMB-8E

10.2
Material:
Polyacetate
1 Suitable for slot type 8

2 Locking screw
Ordering data
10 … 125 178 230 SMB-8E
Ordering data – Cable clip SMBK-8

Part No. Type
For fixing the cable in the sensor slot 534 254 SMBK-8
Ordering data – Push-in fittings Technical data Volume 3

[mm] Part No. Type
Push-in connector with connectingg thread M55 for tubingg OD 3 153 302 QSM-M5-3
4 153 304 QSM-M5-4
6 153 306 QSM-M5-6
Push-in L connector with connectingg thread M5 for tubingg OD 3 153 331 QSML-M5-3
4 153 333 QSML-M5-4
6 153 335 QSML-M5-6
Core Range

-V- New

Measuringg Design
g Type
p
principle NO contact NC contact
Magneto-
resistive SMT-10F Insertable from above PNP
–
-V- New
NPN
–
SMT-10 Insertable from end PNP

–
NPN
–
Magnetic
reed SME-10F Insertable from above Contacting
–
Drive accessories
-V- New
Cylinder sensors
–
SME-10 Insertable from end Contacting

–
10.2

-V- New

Type
yp Electrical connection Switchingg status display
p y Free of copper
pp and Teflon Page
g
Cable Plug with LED
SMT-10F 3-wire M8x1, 3-pin 1 / 10.2-47

-V - New
3-wire M8x1, 3-pin

SMT-10 3-wire M8x1, 3-pin 1 / 10.2-53

3-wire M8x1, 3-pin


SME-10F 3-wire M8x1, 3-pin 1 / 10.2-50

Drive accessories
-V - New
Cylinder sensors
2-wire –

SME-10 3-wire M8x1, 3-pin 1 / 10.2-55

10.2

aD
4
Drive accessories
Cylinder sensors
aE
10.2
9
aA
aJ
aF
aB
5 aC


Proximity sensors
1 SMT-10F-…-K2,5L-OE Magneto-resistive, with cable, in-line connection 1 / 10.2-47
SME-10F-…-K2,5L-OE Magnetic reed, with cable, in-line connection 1 / 10.2-50
2 SMT-10F-…-K2,5Q-OE Magneto-resistive, with cable, lateral connection 1 / 10.2-47
SME-10F-…-K2,5Q-OE Magnetic reed, with cable, lateral connection 1 / 10.2-50
3 SMT-10F-…-K0,3L-M8D Magneto-resistive, with cable and plug M8x1, in-line connection 1 / 10.2-47
SME-10F-…-K0,3L-M8D Magnetic reed, with cable and plug M8x1, in-line connection 1 / 10.2-50
4 SMT-10F-…-K0,3Q-M8D Magneto-resistive, with cable and plug M8x1, lateral connection 1 / 10.2-47
SME-10F-…-K0,3Q-M8D Magnetic reed, with cable and plug M8x1, lateral connection 1 / 10.2-50
5 SMT-10-KL-… Magneto-resistive, with cable, in-line connection 1 / 10.2-53
SME-10-KL-… Magnetic reed, with cable, in-line connection 1 / 10.2-55
6 SMT-10-KQ-… Magneto-resistive, with cable, lateral connection 1 / 10.2-53
SME-10-KQ-… Magnetic reed, with cable, lateral connection 1 / 10.2-55
Drive accessories
Cylinder sensors
7 SMT-10-SL-… Magneto-resistive, with cable and plug M8x1, in-line connection 1 / 10.2-53
SME-10-SL-… Magnetic reed, with cable and plug M8x1, in-line connection 1 / 10.2-55
8 SMT-10-SQ-… Magneto-resistive, with cable and plug M8x1, lateral connection 1 / 10.2-53
SME-10-SQ-… Magnetic reed, with cable and plug M8x1, lateral connection 1 / 10.2-55
Accessories
10.2
aJ Plug socket with cable SIM-M8-3WD-… Angled socket, M8x1, 3-pin 1 / 10.2-108
aA Mounting kit SMBR-10-… For round cylinders DSEU, ESEU, DSNU, ESNU, DSW, ESW 1 / 10.2-57
aB Mounting kit WSM-…-SME-10 For swivel module DSM 1 / 10.2-57
aC Sensor tester SM-TEST-1 1 / 10.2-107
Drives
aD Drives with slot type 10 (rounded slot) –
aE Round cylinder ∅ 6 … 63 mm
aF Swivel module DSM ∅ 6 … 10 mm

-V- New
Proximity sensors SMT/SME-10F, for slot type 10

Type code
SMT — 10F — PS — 24V — K2,5L — OE
Type
Design
10F For rounded slot, inserted from above

DS NO contact, 3-wire
Drive accessories

Cylinder sensors
24V 24 V DC
Cable length, connection direction

K0,3L 0.3 m, in-line with switch axis
K0,3Q 0.3 m, at right angle to switch axis
10.2 K2,5L 2.5 m, in-line with switch axis
K2,5Q 2.5 m, at right angle to switch axis
OE Cable
M8D Plug M8x1 with cable

-V- New

Function
NO contact, PNP, with plug NO contact, PNP, with cable
BN + BN +
BK RL BK RL
PNP BU PNP BU –
–
NO contact, NPN, with plug NO contact, NPN, with cable

BN + BN +
NPN BK NPN BK
BU RL BU RL
– –

Electrical data
Drive accessories
Cylinder sensors
Electrical connection Cable, 3-wire Cable with plug M8x1, Cable, 3-wire Cable with plug M8x1,
3-pin 3-pin
Voltage drop [V] 2
Residual current [mA] 0.06 0.01
10.2
Design
Design For rounded slot
Type of mounting Clamped in rounded slot, insertable from above
Switch-on time [ms] 0.33 0.5
Switch-off time [ms] 0.3 0.5
Cable length [m] 2.5 0.3 2.5 0.3
Connection direction In-line or lateral
Product weight [g] 15.5 5 15.5 5

-V- New




With cable, in-line connection With cable, lateral connection
Drive accessories
Cylinder sensors
10.2 1 Connecting cable

4 Yellow LED
5 Switching point with
SMT-10F-NS-…
SMT-10F-PS/ZS-…
With plug M8, in-line connection
1 Connecting cable
4 Yellow LED
SMT-10F-NS-…
SMT-10F-PS-…
With plug M8, lateral connection
1 Connecting cable
4 Yellow LED
SMT-10F-NS-…
SMT-10F-PS-…

-V- New

Ordering data
Switch output
p Electrical connection Cable length Connection Part No. Type
yp
Cable Plug M8 [m] direction
NO contact
PNP 3-wire
3 – 2.5
5 In-line 525 915 SMT-10F-PS-24V-K2,5L-OE
Lateral 526 674 SMT-10F-PS-24V-K2,5Q-OE
– 3-pin
3 p 0.3
3 In-line 525 916 SMT-10F-PS-24V-K0,3L-M8D
Lateral 526 675 SMT-10F-PS-24V-K0,3Q-M8D
NPN 3-wire
3 – 2.5
5 In-line 526 678 SMT-10F-NS-24V-K2,5L-OE
Lateral 526 680 SMT-10F-NS-24V-K2,5Q-OE
– 3-pin
3 p 0.3
3 In-line 526 679 SMT-10F-NS-24V-K0,3L-M8D
Lateral 526 681 SMT-10F-NS-24V-K0,3Q-M8D
Drive accessories
Cylinder sensors
10.2

-V- New

Function
NO contact, with 3-wire cable NO contact, 3-wire, with plug
BN +/– BN +/–
BK RL BK RL
BU –/+ BU –/+
NO contact, with 2-wire cable

BN RL
+/–/~
BU –/+/~

Electrical data
Drive accessories
Cylinder sensors
Electrical connection Cable, 3-wire Cable with plug M8x1, 3-pin Cable, 2-wire
Operating
p g voltage
g D.C. voltage [V DC] 10 … 30 5 … 30
range A.C. voltage [V AC] 10 … 30 5 … 30
Max. output current [mA] 500 100
Max. switchingg D.C. voltage [W] 10 3
capacity A.C. voltage [VA] 10 3
10.2
Voltage drop [V] – 4.5
Residual current [mA] – –
Protection against polarity reversal No For all electrical connections
Design
Type of mounting Clamped in rounded slot, insertable from above
Reproducibility of switching point 1) [mm] ±0.1
Cable length [m] 2.5 0.3 2.5
Product weight [g] 20 6 20



-V- New


1 Connecting cable
4 Yellow LED (SME-10F-ZS-…)
5 Switching point
6 Yellow LED (SME-10F-DS-…,
positive or negative switching)
Drive accessories
Cylinder sensors
1 Connecting cable
with cable SIM-M8-… 10.2
4 Yellow LED (positive or negative
switching)
5 Switching point
1 Connecting cable
4 Yellow LED (positive or negative
switching)
5 Switching point
Ordering data
Electrical connection Cable length Connection Part No. Type
yp
NO contact
3-wire
3 – 2,5
,5 In-line 525 913 SME-10F-DS-24V-K2,5L-OE
Lateral 526 670 SME-10F-DS-24V-K2,5Q-OE
– 3-pin
3 p 0,3
,3 In-line 525 914 SME-10F-DS-24V-K0,3L-M8D
Lateral 526 671 SME-10F-DS-24V-K0,3Q-M8D

2-wire – 2,5
,5 In-line 526 672 SME-10F-ZS-24V-K2,5L-OE
Lateral 526 673 SME-10F-ZS-24V-K2,5Q-OE
Core Range

Proximity sensors SMT/SME-10, for slot type 10
Type code
SMT — 10 — PS — KL — LED — 24
Type
Design
10 For rounded slot, insertable

ZS NO contact, 2-wire
Drive accessories
Electrical connection, cable length,

Cylinder sensors
connection direction
KL Cable, 2.5 m, in-line with switch axis
KQ Cable, 2.5 m, at right angle to switch axis
SL Plug M8x1 with cable, 0.3 m,
in-line with switch axis
10.2 SQ Plug M8x1 with cable, 0.3 m,
at right angle to switch axis

LED Yellow LED

24 24 V DC

Function
BN + BN +
BK RL BK RL
PNP BU PNP BU –
–

BN + BN +
NPN BK NPN BK
BU RL BU RL
– –

Electrical data
Drive accessories
Cylinder sensors
Electrical connection Cable, 3-wire Cable with plug M8x1, Cable, 3-wire Cable with plug M8x1,
3-pin 3-pin
10.2
Design
Type of mounting Clamped in rounded slot, insertable from end
Cable length [m] 2.5 0.3 2.5 0.3




1 Connecting cable
2 Yellow LED
4 Set screw M2x4

2 Yellow LED
Drive accessories
Cylinder sensors

4 Set screw M2x4
10.2

2 Yellow LED
4 Set screw M2x4
Ordering data
Switch output
p Electrical connection Cable length Connection Part No. Type
yp
NO contact
NPN 3-wire
3 – 2.5
5 In-line 173 222 SMT-10-NS-KL-LED-24
Lateral 173 223 SMT-10-NS-KQ-LED-24
– 3-pin
3 p 0.3
3 In-line 173 224 SMT-10-NS-SL-LED-24
Lateral 173 225 SMT-10-NS-SQ-LED-24
PNP 3-wire
3 – 2.5
5 In-line 173 218 SMT-10-PS-KL-LED-24
Lateral 173 219 SMT-10-PS-KQ-LED-24
– 3-pin
3 p 0.3
3 In-line 173 220 SMT-10-PS-SL-LED-24
Lateral 173 221 SMT-10-PS-SQ-LED-24
Core Range

Function
BN +/– BN +/–
BK RL BK RL
BU –/+ BU –/+

Electrical data
Drive accessories
Cylinder sensors
Electrical connection Cable, 3-wire Cable with plug M8x1, 3-pin
Residual current [mA] –
10.2
Design
Type of mounting Clamped in rounded slot, insertable from end
Cable length [m] 2.5 0.3
Materials Housing Polyphenylene sulphide
Product weight [g] 20 5




1 Connecting cable
3 Set screw M2x4
4 Yellow LED (positive switching)
5 Yellow LED (negative switching)

Drive accessories
Cylinder sensors

3 Set screw M2x4
10.2

3 Set screw M2x4
Ordering data
yp
NO contact
33-wire – 2.5
5 In-line 173 210 SME-10-KL-LED-24
Lateral 173 211 SME-10-KQ-LED-24
– 3-pin
3 p 0.3
3 In-line 173 212 SME-10-SL-LED-24
Lateral 173 213 SME-10-SQ-LED-24

Accessories
Mounting kit SMBR
Material:
Polyacetate
1 Proximity sensor
SME/SMT-10…
2 Guide slot
for cable

For piston ∅ B1 B2 B3 B4 H1 Part No. Type
±0.1 ±0.1
6 15.6 9.4 7 13.5 13.5 173 226 SMBR-10-6
Drive accessories
Cylinder sensors
8 18.9 12.3 7 19 17.5 175 101 SMBR-10-8
10 20.4 13.7 7 19 19.9 173 227 SMBR-10-10
12 22.7 14.3 7 19 21.9 175 102 SMBR-10-12
16 26.1 17 7 19 25.7 173 228 SMBR-10-16
20 33.2 20.8 9 19 30.4 175 103 SMBR-10-20
25 36.5 22.6 9 19 35.6 175 104 SMBR-10-25
10.2
32 41.7 24.5 9 19 42.7 175 105 SMBR-10-32
40 47 26.5 9 19 50.7 175 106 SMBR-10-40
50 56.4 28.6 9 19 61.5 175 107 SMBR-10-50
63 69.4 32 9 19 74.5 175 108 SMBR-10-63
Ordering data – Mounting kit WSM-…-SME-10

Piston ∅ Part No. Type
For swivel module DSM 6 173 205 WSM-6-SME-10
8 173 206 WSM-8-SME-10
10 173 207 WSM-10-SME-10
Ordering data – Cable clip SMBK-10

Part No. Type
For fixing the cable in the sensor slot 534 255 SMBK-10
Core Range

Proximity sensors, round design
Measuringg Design
g Type
Magneto-
inductive SMTO-4U With accessories PNP 3-wire M8x1, 3-pin
–

–
Magnetic
reed SMEO-4U With accessories Contacting 3-wire M8x1, 3-pin
–
CRSMEO-4 With accessories Contacting 3-wire –

Corrosion resistant –
Drive accessories
Cylinder sensors

SMEO-4U With accessories Contacting 2-wire –
–
10.2

Type
yp Connection direction Switchingg status display
p y Free of copper
pp and Teflon Page
g
In-line Lateral with LED
SMTO-4U 1 / 10.2-63
–
–

SMEO-4U 1 / 10.2-65
–
CRSMEO-4 1 / 10.2-68
Corrosion resistant – –
Drive accessories
Cylinder sensors
SMEO-4U 1 / 10.2-65
– –
10.2

aJ
4
Drive accessories
Cylinder sensors
1 aA
7
5
10.2
aB
8
3


Proximity sensors
1 SMTO-4U-K Magneto-inductive, with cable 1 / 10.2-63
SMEO-4U-K Magnetic reed, with cable 1 / 10.2-65
2 SMTO-4U-S Magneto-inductive, with plug M8x1 1 / 10.2-63
SMEO-4U-S Magnetic reed, with plug M8x1 1 / 10.2-65
3 CRSMEO-4 Magnetic reed, corrosion resistant, with cable 1 / 10.2-68
Accessories
6 Mounting kit SMBR-… For round cylinders 1 / 10.2-70
7 Mounting kit CRSMBR-… Corrosion resistant, for round cylinders 1 / 10.2-70
8 Mounting kit CRSMB-… Corrosion resistant 1 / 10.2-71
Drive accessories
9 Sensor tester SM-TEST-1
Cylinder sensors
1 / 10.2-107
Drives
aJ Round cylinder ∅ 8 … 63 mm –
aA Round cylinders CRDG, CRDSW, CRDSNU, stainless steel ∅ 12 … 63 mm
aB Standard cylinders CRDNG, CRDNGS, stainless steel ∅ 32 … 125 mm
10.2

Type code
SMTO — 4U — PS — K — LED — 24 —
Type
SMTO Proximity sensor, magneto-inductive
SMEO Proximity sensor, magnetic reed
CRSMEO Proximity sensor, magnetic reed, corrosion
resistant
Design
4U Round design, U-shaped housing
4 Round design, straight housing

Drive accessories

Cylinder sensors
NO contact, 2- or 3-wire

K Cable, 2.5 m
K5 Cable, 5 m
10.2 S Plug M8x1

LED Yellow LED

24 24 V DC
230 230 V AC
Generation
Series A
B Series B

Proximity sensors SMTO-4U, round design
Technical data – Magneto-inductive measuring principle
Function
BN + BN +
BK RL BK RL
PNP BU PNP BU –
–

BN + BN +
NPN BK NPN BK
BU RL BU RL
– –

Electrical data
Drive accessories
Cylinder sensors
Electrical connection Cable, 3-wire Plug M8x1, 3-pin Cable, 3-wire Plug M8x1, 3-pin
Voltage drop [V] 2
10.2
Design
Design Round
Cable length [m] 2.5 – 2.5 –
Connection direction In-line
Cable sheath PVC – PVC –

Ambient temperature [°C] –25… +70 –5 … +70 –25… +70


Proximity sensors SMTO-4U, round design

With cable
1 Connecting cable
2 Yellow LED
With plug M8
Drive accessories
Cylinder sensors
2 Yellow LED
4 Installation space for angled
socket
10.2
Ordering data
Switch output
yp
Cable Plug M8 [m]
NO contact
PNP 3-wire – 2.5 152 836 SMTO-4U-PS-K-LED-24
– 3-pin – 152 742 SMTO-4U-PS-S-LED-24
NPN 3-wire – 2.5 152 837 SMTO-4U-NS-K-LED-24
– 3-pin – 152 743 SMTO-4U-NS-S-LED-24

Proximity sensors SMEO-4U, round design
Function
BN +/– BN +/–
BK RL BK RL
BU –/+ BU –/+

BN RL
+/–/~
BU –/+/~

Electrical data
Switch output Contacting, bipolar1)
Drive accessories
Cylinder sensors
Electrical connection Cable, 3-wire Cable, 3-wire Plug M8x1, 3-pin Cable, 2-wire
Operating
p g D.C. voltage [V DC] 12 … 27 12 … 250
voltage range A.C. voltage [V AC] – 12 … 250
Max. output current [mA] 500 500
Max. switchingg D.C. voltage [W] 10 10
capacity A.C. voltage [VA] – 10
10.2
Voltage drop [V] – 4.1
Residual current [mA] – –
CE symbol
y 89/336/EEC (EMC) Yes Yes
73/72/EEC (low voltage) Omitted Yes
Design
Design Round
Cable length [m] 2.5 5 – 2.5
Cable sheath Polyurethane Polyvinyl chloride – Polyvinyl chloride
Note on material – Free of copper and Teflon –
1) 2-wire design, bipolar, without LED function





With cable
Drive accessories
Cylinder sensors
1 Connecting cable
2 Yellow LED
10.2
With plug M8
2 Yellow LED
socket

Ordering data
yp
Cable Plug M8 [m]
NO contact
33-wire – 2.5 36 198 SMEO-4U-K-LED-24
5 175 401 SMEO-4U-K5-LED-24
– 3-pin – 151 526 SMEO-4U-S-LED-24-B

2-wire – 2.5 150 011 SMEO-4U-K-LED-230
Drive accessories
Cylinder sensors
10.2

Proximity sensors CRSMEO-4, round design
Function
corrosion resistant
BN +/–
BK RL
BU –/+

Electrical data
Switch output Contacting
Drive accessories
Cylinder sensors
Electrical connection Cable, 3-wire

Operating
p g voltage
g D.C. voltage [V DC] 12 … 30
range A.C. voltage [V AC] 12 … 30
Max. switchingg D.C. voltage [W] 10
capacity A.C. voltage [VA] 10
10.2
Residual current [mA] –
Design
Design Round
Cable length [m] 2.5
Materials Housing Polypropylene
Cable sheath Termoplastic rubber

Electrical connection Cable
Ambient temperature [°C] –20 … +60 –5 … +60


Proximity sensors CRSMEO-4, round design

With cable
1 Connecting cable
2 Yellow LED
3 Clamping range
Ordering data
yp
Cable [m]
Drive accessories
Cylinder sensors
NO contact
Corrosion resistant
3-wire 2.5 161 775 CRSMEO-4-K-LED-24
10.2

Accessories
Mounting kit SMBR
Material:
Polyacetate
1 Proximity sensor SM…-4

For piston ∅ B1 B2 B3 H1 H2 H3 Part No. Type
8 21 – 14 23.5 16.5 9 19 272 SMBR-8
166 398 SMBR-8-CT1)
Drive accessories
Cylinder sensors
10 22 0.5 14 26 18.5 10 19 273 SMBR-10

166 399 SMBR-10-CT1)
12 22 4 11 28.5 20 10.2 19 274 SMBR-12
166 400 SMBR-12-CT1)
16 22.5 4 11.5 33.5 22.5 12.4 19 275 SMBR-16
166 401 SMBR-16-CT1)
10.2
20 26.5 5.5 13.5 35.5 22.5 14 19 276 SMBR-20
166 402 SMBR-20-CT1)
25 31.5 7.5 16 40.5 25 16 19 277 SMBR-25
166 403 SMBR-25-CT1)
1) Free of Copper and Teflon
Mounting kit CRSMBR
Material:
Polypropylene

For piston ∅ B1 B2 H1 H2 H3 Part No. Type
12 22 4.1 28.6 20 10.2 164 581 CRSMBR-12
16 22.3 4 33.2 22.5 12.4 164 582 CRSMBR-16
20 26.5 5.6 35.25 22.5 14 164 583 CRSMBR-20
25 31.5 7.4 40.2 25 16 164 584 CRSMBR-25
32 38.6 7.9 47.8 29 19.7 163 888 CRSMBR-32
40 46.6 8.1 55.8 33 23.8 163 889 CRSMBR-40
50 57.4 8.2 67.2 39 29.5 163 890 CRSMBR-50
63 70.4 8.2 80.8 45.9 36.2 163 891 CRSMBR-63

Accessories
Mounting kit CRSMB
Material:
High-alloy stainless steel

For piston ∅ B1 H1 Part No. Type
32 29 17.6 161 763 CRSMB-32
40 29 15.1 161 764 CRSMB-40
Drive accessories
Cylinder sensors
50 31.1 17.4 161 765 CRSMB-50
63 31.1 18.1 161 766 CRSMB-63
80 33 24.2 161 767 CRSMB-80
100 33 27.5 161 768 CRSMB-100
125 36.5 31.1 185 365 CRSMB-125
10.2

Proximity sensors, block design
Measuringg Design
g Type
Magneto-
resistive SMTO-1 With accessories PNP 3-wire M8x1, 3-pin
–

–
SMTSO-1 PNP – M12x1, 3-pin

Welding field
immune –
Magneto-
inductive SMTO-6 With accessories PNP – M12x1, 3-pin
Drive accessories
Cylinder sensors
–
Magnetic
reed SMEO-1 With accessories Contacting – M8x1, 3-pin1)
10.2 –
– 3-wire M8x1, 3-pin
Operating voltage range 0 … 250 V AC, 0 … 200 V DC

SMEO-1-B With accessories Contacting 2-wire –
–
SMEO-1 2-wire –
–
2-wire –
–
SMEO-1-S6-C 2-wire –
to 120 °C
Pneumatic Operating pressure 2 … 6 bar

SMPO-1 With accessories – – –
2) –
1) The proximity sensor has 2 wires internally. One pin of the M8x1 plug is unused.
2) 3/2-way valve, normally closed

Type
pp and Page
g
SMTO-1 1 / 10.2-77
– 1)
– 1) –
SMTSO-1 1 / 10.2-79
Welding field
immune – – –

SMTO-6 1 / 10.2-81
Drive accessories
Cylinder sensors
– – –

SMEO-1 – 1) – 1 / 10.2-83
10.2
– 1)

SMEO-1-B 1 / 10.2-83
– 1) – –
SMEO-1
– 1) –
– 1) – –
SMEO-1-S6-C
Heat resistant up – 1) –
to 120 °C
Operating pressure 2 … 6 bar

SMPO-1 1 / 10.2-86
– 1) – 2) –
1) Not in combination with mounting kit SMB-1 or SMBS-…

2) Switching status is indicated by means of an LED.

aG
aH
aJ
aI
Drive accessories
Cylinder sensors
aA
bJ
1
10.2
aB
6
2
bA
7
aC
3
aH
aJ
8
4
9
bB
aD
5
bC
aE
aF


Proximity sensors
1 SMTO-1-… Magneto-resistive, with cable 1 / 10.2-77
SMEO-1-… Magnetic reed, with cable 1 / 10.2-83
2 SMTO-1-… Magneto-resistive, with plug M8x1 1 / 10.2-77
SMEO-1-… Magnetic reed, with plug M8x1 1 / 10.2-83
3 SMTO-6-… Magneto-inductive, with plug M12x1 1 / 10.2-81
4 SMTSO-1-… Magneto-resistive, welding field immune, with plug M12x1 1 / 10.2-79
5 SMPO-1-… Pneumatic 1 / 10.2-86
Accessories
Drive accessories
9 Plug socket with cable SIM-M12-3WD-…
Cylinder sensors
Angled socket, M12x1, 3-pin 1 / 10.2-108
aJ Mounting kit SMB-1 For standard cylinders DNG 1 / 10.2-88
aA Mounting kit SMBU-1-B For standard cylinders DNU 1 / 10.2-88
aB Mounting kits SMB-2-B, SMB-3-B For standard cylinders DNG 1 / 10.2-88
aC Mounting kit SMBT-1 For standard cylinders DNG 1 / 10.2-89
aD Mounting kit SMBS-… For round cylinders 1 / 10.2-89
aE Mounting kit SMBU-1-H-32 For standard cylinders DNU 1 / 10.2-89 10.2
aF Sensor tester SM-TEST-1 1 / 10.2-107
Drives
aG Standard cylinder DNG ∅ 32 … 320 mm –
aH Flat cylinder DZH ∅ 32 … 63 mm
Semi-rotary drive DRQ ∅ 40 … 100 mm
aI Standard cylinder DNU ∅ 32 … 125 mm
bJ Standard cylinder DNG ∅ 32 … 320 mm
bA Standard cylinder DNG ∅ 32 … 320 mm
bB Round cylinder ∅ 8 … 100 mm
bC Standard cylinder DNU ∅ 32 … 125 mm

Type code
SMTO-1 — PS — K — LED — 24 — C
Type
SMTO-1 Proximity sensor, block design, magneto-
resistive
SMTSO-1 Proximity sensor, block design, magneto-
resistive, welding field immune
SMTO-6 Proximity sensor, block design, magneto-
inductive
SMEO-1 Proximity sensor, block design, magnetic
reed
SMPO-1 Proximity sensor, block design, pneumatic

Drive accessories
Cylinder sensors

NO contact, 2- or 3-wire

K Cable, 2.5 m
10.2 S Plug M8x1

LED Yellow LED

24 24 V DC
230 230 V AC
Generation
Series A
B Series B
C Series C

Proximity sensors SMTO-1, block design
Function
BN + BN +
BK RL BK RL

BN + BN +
NPN BK NPN BK
BU RL BU RL
– –

Electrical data
Drive accessories
Cylinder sensors
Max. switching current [mA] 200
Voltage drop [V] 3
10.2
Design
Design Block design
Materials Housing Die-cast zinc, polyester, spring steel
Cable sheath Polyvinyl chloride




With cable
1 Connecting cable
2 Yellow LED
Drive accessories
Cylinder sensors
With plug M8
10.2
2 Yellow LED
socket
Ordering data
Switch output
yp
Cable Plug M8 [m]
NO contact
PNP 3-wire – 2.5 151 683 SMTO-1-PS-K-LED-24-C
– 3-pin – 151 685 SMTO-1-PS-S-LED-24-C
NPN 3-wire – 2.5 151 684 SMTO-1-NS-K-LED-24-C
– 3-pin – 151 686 SMTO-1-NS-S-LED-24-C

Proximity sensors SMTSO-1, block design
Function
BN +
BK RL
PNP BU –

Electrical data
Switch output PNP
Drive accessories
Cylinder sensors
Voltage drop [V] 3
10.2
Resistance to interference from magnetic fields Alternating magnetic field 50 … 60 Hz
Design
Design Block design
Ready status display Green LED
Materials Housing Die-cast zinc


Components requiring low corrosion resistance. Transport and storage protection. Parts that do not have primarily decorative surface requirements, e.g. in internal areas that are not visible or behind covers.

Proximity sensors SMTSO-1, block design

With plug M12
1 Green LED
2 Yellow LED
3 Mounting kit
Drive accessories
Cylinder sensors
Ordering data
Switch output
yp
Plug M12 [m]
NO contact
10.2 PNP 3-pin – 30 441 SMTSO-1-PS-S-LED-24

Function
BN +
BK RL
PNP BU –

Electrical data
Switch output PNP
Drive accessories
Cylinder sensors
Voltage drop [V] 3
10.2
Design
Design Block design




With plug M12
1 Yellow LED
3 Mounting kit
Ordering data
Switch output
yp
Drive accessories
Plug M12 [m]

Cylinder sensors
NO contact
PNP 3-pin – 35 573 SMTO-6-PS-S-LED-24
10.2

Proximity sensors SMEO-1, block design
Function
NO contact, with 3-wire cable NO contact, with 2-wire cable1)
BN +/– BN RL
+/–/~
BK RL BU –/+/~
BU –/+
1) Heat-resistant design, 0 ... 30 V AC/DC
NO contact, 3-wire, with plug NO contact, 2-wire, with plug

BN BN RL
+/– +/–/~
BK RL BU –/+/~
BU –/+

Electrical data
Drive accessories
Cylinder sensors
Electrical connection Cable, Cable, Plug Cable, Cable, Cable, Cable, Plug
3-wire 3-wire M8x1, 2-wire 2-wire 2-wire 2-wire1) M8x1,
3-pin 2-pin
Operating
p g D.C. voltage [V DC] 12 … 27 5 … 200 0 … 200 0 … 30
voltage range A.C. voltage [V AC] – 5 … 250 0 … 250 –
Max. switchingg D.C. voltage [mA] 1000 500 1000 1000
10.2
current A.C. voltage [mA] – 500 1000 –
Max. switchingg D.C. voltage [W] 27 40 40 40
capacity A.C. voltage [VA] – 40 40 –
Voltage drop [V] – 4.1 – –
CE symbol
y 89/336/EEC (EMC) Yes Yes Omitted Yes
73/23/EEC (low voltage) Omitted Yes Yes Omitted
Design
Design Block design
Switching status display Yellow LED Yellow LED Yellow LED Yellow LED Yellow LED – – –
Cable length [m] 2.5 5.0 – 2.5 5.0 2.5 2.5 –
Materials Housing Die-cast zinc, polyester, spring steel
Cable sheath Polyurethane – Polyurethane –
Product weight [g] 85 130 20 100 130 85 130 20


Electrical connection Cable Cable, heat resistant Plug
Ambient temperature [°C] –20 … +70 –5 … +70 –10 … +120 –5 … +120 –20 … +70


With cable
Drive accessories
Cylinder sensors
10.2
1 Connecting cable
2 Yellow LED
With plug M8
2 Yellow LED
socket

Ordering data
Electrical connection Cable length Switchingg status Part No. Type
yp
Cable Plug M8 [m] display with LED
NO contact
3-wire – 2.5 30 459 SMEO-1-LED-24-B
3-wire – 5.0 151 672 SMEO-1-LED-24-K5-B
– 3-pin – 150 848 SMEO-1-S-LED-24-B

2-wire – 2.5 – 30 457 SMEO-1-B
2-wire – 2.5 151 671 SMEO-1-LED-230-B
2-wire – 5.0 160 998 SMEO-1-LED-230-K5-B
2-wire – 2.5 – 151 673 SMEO-1-S6-C
Drive accessories
Cylinder sensors
– 3-pin1) – – 150 847 SMEO-1-S-24-B
1) The proximity sensor has 2 wires internally. One pin of the M8x1 plug is unused.
10.2

Proximity sensors SMPO-1, block design
Function
3/2-way valve,
normally closed

Switching element function 3/2-way valve, normally closed
Design
Design Block design
Drive accessories
Cylinder sensors

Operating medium Filtered, unlubricated compressed air
Operating pressure [bar] 2…6
10.2
Switching status display Visual
Pneumatic connection Barbed connector PK-3
Materials Housing PA
Barbed connector Brass
Electrical data
CE symbol Omitted



Proximity sensors SMPO-1, block design
1 Barbed connector for tubing,

3mm I.D.
2 Visual indicator
Drive accessories
Cylinder sensors
Ordering data
Pneumatic connection Part No. Type
3/2-way valve, normally closed
Barbed connector for 3mm I.D. tubing 31 008 SMPO-1-H-B
10.2

Accessories
Mounting kit SMB-1
Material:
Die-cast zinc

32 … 100 11 886 SMB-1
Mounting kit SMB-2-B/SMB-3-B

Drive accessories
Cylinder sensors
Material:
Die-cast aluminium
10.2

For piston ∅ B1 B2 L1 L2 Part No. Type
32 … 50 18 11 23 11.6 36 162 SMB-2-B
63 … 100 26.8 13.7 26 10.8 36 163 SMB-3-B
Mounting kit SMBU
Material:
Die-cast aluminium

For piston ∅ B1 B2 L1 Part No. Type
32 … 50 19 8.5 30 36 173 SMBU-1-B1)
63 … 100 31 13.5 34 36 174 SMBU-2-B1)
125 31 13.5 37 125 828 SMBU-3-B
1) Free of copper and Teflon

Accessories
Mounting kit SMBU-1-H-32
Material:
Aluminium
1 Proximity sensor SMPO-1

32 150 216 SMBU-1-H-32
Drive accessories
Cylinder sensors
Mounting kit SMBS
Material:
Brass, plastic
10.2
1 Mounting bracket
2 Base plate
3 Clamping strap
4 Proximity sensor SMPO
5 Mounting screw

8 … 25 151 225 SMBS-1
32 … 100 151 226 SMBS-2
Mounting kit SMBT-1
Material:
Die-cast zinc
1 Proximity sensor
SMTO-6/SMTSO-1

32 … 200 150 002 SMBT-1

Do not use for new designs!
-U- Type to be discontinued
Proximity sensors for dovetail slots

Measuringg Design
g Type
Magneto-
resistive SMT-3 Insertable from PNP 3-wire M8x1, 3-pin
–
end
–
Magnetic
reed SME-3 Insertable from Contacting 3-wire –
–
end
– M8x1, 3-pin
–
– M8x1, 3-pin
–
Drive accessories
Cylinder sensors
10.2

Proximity sensor for dovetail slots

Type
yp Connection direction Switchingg status display
p y Free of copper
pp and Teflon Page
g
In-line Lateral with LED
SMT-3 1 / 10.2-93
–
–

SME-3 1 / 10.2-96
– –
– –
– –
Drive accessories
Cylinder sensors
10.2

Proximity sensor for dovetail slots

Type code
SMT — 3 — PS — KL — LED — 24 —
Type
SMT Proximity sensor, magneto-inductive
Design
3 For dovetail slots

NO contact, 3-wire
Drive accessories
Electrical connection, cable length,

Cylinder sensors
connection direction
KL Cable, 2.5 m, in-line with switch axis
KQ Cable, 2.5 m, at right angle to switch axis
K5 Cable, 5 m, at right angle to switch axis
SL Plug M8x1, in-line with switch axis
10.2 SQ Plug M8x1, at right angle to switch axis

LED Yellow LED

24 24 V DC
Generation
Series A
B Series B

Proximity sensors SMT-3, for dovetail slots

Function
BN + BN +
BK RL BK RL

BN + BN +
NPN BK NPN BK
BU RL BU RL
– –

Electrical data
Drive accessories
Cylinder sensors
Voltage drop [V] 3
10.2
Design
Design For dovetail slots
Type of mounting Clamped in dovetail slot




With cable, lateral connection
1 Connecting cable
2 Switching point
3 Yellow LED
5 Max. tightening torque
Drive accessories
0.7 Nm (SW 2)
Cylinder sensors
With cable, in-line connection
10.2 1 Connecting cable

2 Switching point
3 Yellow LED
0.7 Nm (SW 2)
2 Switching point
3 Yellow LED
0.7 Nm (SW 2)
2 Switching point
3 Yellow LED
0.7 Nm (SW 2)


Ordering data
Electrical connection Switch output
p Cable length Connection Part No. Type
yp
NO contact
3-wire
3 – PNP 2.5
5 In-line 30 976 SMT-3-PS-KL-LED-24
Lateral 31 011 SMT-3-PS-KQ-LED-24
– 3-pin
3 p – In-line 150 868 SMT-3-PS-SL-LED-24-B
Lateral 150 869 SMT-3-PS-SQ-LED-24-B
3-wire
3 – NPN 2.5
5 In-line 30 977 SMT-3-NS-KL-LED-24
Lateral 31 012 SMT-3-NS-KQ-LED-24
– 3-pin
3 p – In-line 150 866 SMT-3-NS-SL-LED-24-B
Lateral 150 867 SMT-3-NS-SQ-LED-24-B
Drive accessories
Cylinder sensors
10.2

Proximity sensors SME-3, for dovetail slots

Function
BN +/– BN +/–
BK RL BK RL
BU –/+ BU –/+

Electrical data
Switch output – Contacting, bipolar
Drive accessories
Cylinder sensors
Electrical connection Cable, 3-wire Plug M8x1, 3-pin

10.2
Design
Design For dovetail slots
Type of mounting Clamped in dovetail slot
Cable length [m] 2.5 5 –
Connection direction Lateral In-line or lateral
Materials Housing Polyphenylene sulphide
Cable sheath Polyurethane –
Product weight [g] 45 75 8


Proximity sensors SME-3, for dovetail slots


With cable, lateral connection
1 Connecting cable
2 Yellow LED
3 Mounting screw
Drive accessories
Cylinder sensors
10.2
1 / 10.2-108
2 Yellow LED
3 Mounting screw

1 / 10.2-108
2 Yellow LED
3 Mounting screw
Ordering data
yp
NO contact
3-wire
3 – 2.5 Lateral 12 112 SME-3-LED-24
5.0 30 291 SME-3-LED-24-K5
– 3-pin
3 p – In-line 150 853 SME-3-SL-LED-24-B
Lateral 150 854 SME-3-SQ-LED-24-B

Proximity sensors SMH, for grippers
1
aC
aB
Drive accessories
Cylinder sensors
aA
7
2
10.2
aD
aJ


Hall proximity sensor
1 SMH-S1-HGD16 For three-point gripper HGD-16-A 1 / 10.2-101
2 SMH-S1-HGPP-… For precision parallel gripper HGPP-…
3 SMH-S1-HGP06 For parallel gripper HGP-06-A
4 SMH-S1-HGR10 For radial gripper HGR-10-A
5 SMH-S1-HGW10 For angle gripper HGW-10-A
Drives
6 Three-point gripper HGD-16-A 1 / 77.5-1
5
7 Precision parallel gripper HGPP-… ∅ 10 … 32 mm
8 Parallel gripper HGP-06-A
9 Radial gripper HGR-10-A
aJ Angle gripper HGW-10-A
Drive accessories
Cylinder sensors
Accessories
aA Connecting cable KSMH-1-M8-2-M8 Proximity sensor/evaluation unit connecting cable, plug/straight socket, M8x1, 4-pin 1 / 10.2-106
aB Evaluation unit SMH-AE1-… 1 / 10.2-104
aC Plug socket with cable SIM-M12-5GD-…-PU Evaluation unit/controller connecting cable, straight socket, M12x1, 5-pin 1 / 10.2-106
aD Sensor tester SM-TEST-1 1 / 10.2-107
10.2

Type code
Proximity sensor
SMH-S1 — HGP06
Type
SMH-S1 Hall proximity sensor for grippers
Associated grippers
HGD16 Three-point gripper HGD-16-…
HGP06 Parallel gripper HGP-06-…
HGR10 Radial gripper HGR-10-…
HGW10 Angle gripper HGW-10-…
HGPP-10/12 Precision parallel gripper HGPP-10-… and
HGPP-12-…
HGPP-16 Precision parallel gripper HGPP-16-…
Drive accessories
Cylinder sensors
HGPP20/25 Precision parallel gripper HGPP-20-… and

HGPP-25-…
HGPP-32 Precision parallel gripper HGPP-32-…
10.2 Evaluation unit
SMH-AE1 — PS3 — M12
Type
SMH-AE1 Evaluation unit
Switch output
PS3 NO contact, PNP, 3 switch outputs
NS3 NO contact, NPN, 3 switch outputs
M12 Plug M12x1, 5-pin

Technical data – Magnetic Hall measuring principle
Proximity sensor SMH-S1-…

Electrical data
Electrical connection Cable with plug M8x1, 4-pin
Drive accessories
Cylinder sensors
Design
Design Hall sensor for grippers
10.2
Type of mounting Screwed to gripper
Cable length [m] 0.5
Product weight [g] 20 (30)1)
1) Weight in brackets applies to SMH-S1-HGD16

Ambient temperature [°C] 5 … +60



SMH-S1-HGD16
Drive accessories
Cylinder sensors
10.2
with cable KSMH-1-M8-2-M8
or evaluation unit SMH-AE1-…
2 Connecting cable
3 Mounting screw
SMH-S1-HGR10
SMH-S1-HGW10

2 Connecting cable
3 Mounting screw


SMH-S1-HGP06

2 Connecting cable
3 Mounting screw
Drive accessories
Cylinder sensors
SMH-S1-HGPP-…
1 Plug suitable for plug socket 10.2

2 Connecting cable
3 Clip for lateral cable exit
Type L1 L2 L3
SMH-S1-HGPP10/12 8.6 29.5 31.2
SMH-S1-HGPP16 9.1 36.4 38.6
SMH-S1-HGPP20/25 9.1 39.5 41.7
SMH-S1-HGPP32 9.1 46.9 49
Ordering data
Associated grippers Part No. Type
HGD-16-A 175 713 SMH-S1-HGD16
HGP-06-A 175 710 SMH-S1-HGP06
HGR-10-A 175 712 SMH-S1-HGR10
HGW-10-A 175 711 SMH-S1-HGW10
HGPP-10-… 189 040 SMH-S1-HGPP10/12
HGPP-12-…
HGPP-16-… 189 041 SMH-S1-HGPP16
HGPP-20-… 189 042 SMH-S1-HGPP20/25
HGPP-25-…
HGPP-32-… 526 895 SMH-S1-HGPP32

Technical data – Evaluation unit
Evaluation unit SMH-AE1-…

Function
PNP NPN

Electrical data
Drive accessories
Cylinder sensors
Sensor connection 4-pin

Operating voltage range [V DC] 12 ... 30
Design
10.2
Type of mounting Via through holes
Ready status display Green LED
Materials Housing Wrought aluminium alloy

Ambient temperature [°C] 5 … +60

Terminal allocation
Connection Symbol Meaning
1 – 0 V DC
2 Large object gripped
3 – 24 V DC
4 Small object gripped
5 Gripper closed
(no object gripped)

Technical data – Evaluation unit

SMH-AE1-…
Drive accessories
Cylinder sensors
10.2
Ordering data
Switch output Part No. Type
PNP 175 708 SMH-AE1-PS3-M12
NPN 175 709 SMH-AE1-NS3-M12

Accessories
Connecting cable M8x1

KSMH-1-M8-2-M8
Material:
Cable sheath: Polyurethane
Ordering data Technical data 4 / 8.3-2

Cable length CRC1) Part No. Type
yp
[m]
Straight socket
Drive accessories
Cylinder sensors
2 2 175 714 KSMH-1-M8-2-M8

10.2 Plug socket with cable M12x1

SIM-M12-5GD-…
Material:
1 Locknut M12x1
Ordering data Technical data 4 / 8.3-2

Cable length CRC1) Part No. Type
yp
[m]
Straight socket
2.5 2 175 715 SIM-M12-5GD-2,5-PU
5 2 175 716 SIM-M12-5GD-5-PU


Sensor tester SM-TEST-1
Technical data
Description
The sensor tester is used to test and Functions:
adjust sensors and proximity – Testing of operation of proximity – Identification of switching outputs
switches. The sensor tester facilitates sensors using the integrated of proximity switches and sensors
commissioning and servicing work. voltage supply with PNP, NPN, NC and NO
– Adjustment of proximity switches functions by means of the
whilst attached to cylinders appropriate LED
4
2
Drive accessories
Cylinder sensors
5
1 Terminal strip for connecting 10.2

cable
2 LED for battery check
3 Magnet for testing of proximity
sensors
4 LED for indicating switching
status
5 On-off button
Ordering data – Sensor tester

Part No. Type
158 481 SM-TEST-1
-H- Note
The tester is powered by two 9 V
block batteries, which are not
included in the scope of delivery.

Proximity sensors
Accessories
Plug socket with cable M8

SIM-M8-3GD-…
SIM-M8-3WD-…
Material:
Ordering data
Switch output Switchingg status display
p y Cable length Weight
PNP NPN with LED [m] [g] Part No. Type
Straight socket
– 2.5 79 159 420 SIM-M8-3GD-2,5-PU
Drive accessories
Cylinder sensors
– 5 150 159 421 SIM-M8-3GD-5-PU

– 10 284 192 964 SIM-M8-3GD-10-PU
Angled socket
– 2.5 81 159 422 SIM-M8-3WD-2,5-PU
10.2 – 5 146 159 423 SIM-M8-3WD-5-PU
– 10 283 192 965 SIM-M8-3WD-10-PU
– 2.5 80 159 426 SIM-M8-3WD-2,5-NSL-PU
– 5 150 159 427 SIM-M8-3WD-5-NSL-PU
– 2.5 83 159 424 SIM-M8-3WD-2,5-PSL-PU
– 5 143 159 425 SIM-M8-3WD-5-PSL-PU
Plug socket with cable M12

SIM-M12-3GD-…
SIM-M12-3WD-…
Material:
Ordering data
Switch output Switchingg status Weldingg field Cable length Weight
PNP NPN display with LED immune [m] [g] Part No. Type
Straight socket
– – 2.5 85 159 428 SIM-M12-3GD-2,5-PU
– – 5 151 159 429 SIM-M12-3GD-5-PU
– 3 131 30 450 SIM-M12-RS-3GD-3
Angled socket
– – 2.5 87 159 430 SIM-M12-3WD-2,5-PU
– – 5 155 159 431 SIM-M12-3WD-5-PU
– – 2.5 88 159 434 SIM-M12-3WD-2,5-NSL-PU
– – 5 155 159 435 SIM-M12-3WD-5-NSL-PU
– – 2.5 86 159 432 SIM-M12-3WD-2,5-PSL-PU
– – 5 158 159 433 SIM-M12-3WD-5-PSL-PU
– 3 138 30 451 SIM-M12-RS-3WD-3
Core Range

Festo Mag. Switch PDF

Uploaded by

Copyright:

Available Formats

Festo Mag. Switch PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Festo Mag. Switch PDF

Uploaded by

Copyright:

Available Formats

Proximity sensors

Switch output contactless or via

Wide range of mounting and

Heat, welding field and

Switching status display via LED

Specified types in accordance with

2003/10 – Subject to change – Products 2004/2005 1 / 10.2-1

changes when a magnetic field

Contacting proximity sensors SME

Welding field immune proximity sensors SMTSO

Pneumatic proximity sensors SMPO

Proximity sensors SMH for grippers

1 / 10.2-2 Products 2004/2005 – Subject to change – 2003/10

Protective circuit for contacting proximity sensors SME

2003/10 – Subject to change – Products 2004/2005 1 / 10.2-3

Drive Remarks SMT-8 SMT-10 SMTO-4U SMTO-1 SMT-3 SMH-S1

Technical data Page 1 / 10.2-6 1 / 10.2-42 1 / 10.2-58 1 / 10.2-72 1 / 10.2-90 1 / 10.2-98

1 / 10.2-4 Products 2004/2005 – Subject to change – 2003/10

Drive Remarks SMT-8 SMT-10 SMTO-4U SMTO-1 SMT-3 SMH-S1

Drives with linear guide

Electrical positioning systems

Technical data Page 1 / 10.2-6 1 / 10.2-42 1 / 10.2-58 1 / 10.2-72 1 / 10.2-90 1 / 10.2-98

2003/10 – Subject to change – Products 2004/2005 1 / 10.2-5

Proximity sensors for slot type 8

NPN 3-wire M8x1, 3-pin

SMT-8 Insertable from end, PNP 3-wire M8x1, 3-pin

flush with the

cylinder profile NPN 3-wire M8x1, 3-pin

CRSMT-8 PNP 3-wire –

SMTO-8E With accessories PNP – M8x1, 3-pin

PNP – M12x1, 3-pin

NPN – M8x1, 3-pin

SMTSO-8E PNP – M12x1, 3-pin

1 / 10.2-6 Products 2004/2005 – Subject to change – 2003/10

Proximity sensors for slot type 8

2003/10 – Subject to change – Products 2004/2005 1 / 10.2-7

Proximity sensors for slot type 8

SME-8 Insertable from end, Contacting 3-wire –

SME-8-SL Insertable from end Contacting – M8x1, 3-pin

SMEO-8E With accessories Contacting – M8x1, 3-pin

Operating voltage range 3 … 250 V AC/DC

Pneumatic Operating pressure 2 … 8 bar

1) 3/2-way valve, normally closed

1 / 10.2-8 Products 2004/2005 – Subject to change – 2003/10

Proximity sensors for slot type 8

Operating voltage range 3 … 250 V AC/DC

Operating pressure 2 … 8 bar

2) Switching status is indicated by means of an LED.

2003/10 – Subject to change – Products 2004/2005 1 / 10.2-9

1 / 10.2-10 Products 2004/2005 – Subject to change – 2003/10

Mounting attachments and accessories

2003/10 – Subject to change – Products 2004/2005 1 / 10.2-11

Proximity sensors SMT/SME-8F, for slot type 8

SMT — 8F — PO — 24V — K7,5 — OE — —

Switching element function, switch output

Rated operating voltage

10.2 Cable length

1 / 10.2-12 Products 2004/2005 – Subject to change – 2003/10

Proximity sensors SMT-8F, for slot type 8