See discussions, stats, and author profiles for this publication at: https://www.researchgate.

net/publication/326723317

Effect of Uplift Pressure under Hydraulic Structure Founded on Isotropic and

Anisotropic Soil

Conference Paper · April 2018

CITATIONS READS

0 467

3 authors:

Aseel Elkatib Haider Alkatib

University Of Kufa University Of Kufa
4 PUBLICATIONS   0 CITATIONS    10 PUBLICATIONS   5 CITATIONS   

SEE PROFILE SEE PROFILE

Hayder Alkhudery
University Of Kufa
8 PUBLICATIONS   1 CITATION   

SEE PROFILE

Some of the authors of this publication are also working on these related projects:

Artificial neural in concrete design View project

Effect of Uplift Pressure under Hydraulic Structure View project

All content following this page was uploaded by Haider Alkatib on 31 July 2018.

The user has requested enhancement of the downloaded file.

 International Journal of Engineering Technology Science and Research
IJETSR
www.ijetsr.com
ISSN 2394 – 3386
Volume 5, Issue 4
April 2018

Effect of Uplift Pressure under Hydraulic Structure Founded

on Isotropic and Anisotropic Soil
Aseel A. A. Al-Katib
Faculty of Engineering,University of Kufa
Haider A. A. Al-Katib
Faculty of Engineering,University of Kufa
Hayder H. Alkhudery
Faculty of Engineering,University of Kufa

ABSTRACT:
In this research, “Slide” program was used to analyze seepage flow under the hydraulic structure through isotropic and
anisotropic soils and its effect on structures with cut-off at downstream, at upstream, and at both of them. The
distribution curves of uplift pressure along the floor had been reached at downstream for different degrees of anisotropy
from the horizontal axis. The effects of anisotropy on uplift pressure . The analysis process depends on a finite element
method. Eight-noded quadratic elements to represent the porous media. The maximum values of uplift pressure under the
structure with cut-off at downstream are seen at 180˚, and 0˚ inclination angles and the minimum values are seen at 90˚
inclination angle, the maximum values of uplift pressure under the structure with cut-off at upstream are at 90˚
inclination angle and the minimum values are at 180˚, and 0˚ angles, and the maximum values of uplift pressure under
the structure with cut-off at upstream and downstream are at 90˚ inclination angle and the minimum values are at 180˚,
and 0˚ inclination angles but the relationship is reversed after x=0.5. The quantity of seepage in downstream side of the
3 3
structure with a cut-off at downstream was 0.546 m /day, at upstream was 0.396 m /day, and at both of them was
3
0.501 m /day. The quantity of seepage for anisotropic soils was calculated for all cases.
KEYWORDS:pressure head,uplift pressure, seepage, isotropic soil and anisotropic soil.

1. INTRODUCTION:
Hydraulic structures asconcrete dams, weirs,culvert, gates, retaining walls…etc. are founded on impervious
soil or pervious soil. The difference in water level between upstream and downstream through the hydraulic
structure results in water seepage through the soil under the hydraulic structure.
anothermethodscalculationslike mathematical solutions, electrical solutions, flow models, fragments methods,
and numerical methods [4].

2. SEEPAGE ANALYSIS:
The effect of seepage through soil requires calculation of uplift pressure under the structure. The uplift
pressure is one of the important points that are consider to the safety and stability of hydraulic structures. It
refers to the pressure of the water seepage under the structure that pushes the floor to up direction. The piping
cavities are been due to water seepage across salt soil (e.g. gypsum salts). these cavities due to salts that
weaken the soil of the hydraulic structure foundation. The isotropic soil, the values of hydraulic conductivity
are equal in all directions. In anisotropic soil, they not equal with different in direction. In this research, the
effect of anisotropy of soil under the hydraulic structures with sheet pile at downstream, at upstream, and at
both of them on the uplift pressure are studied.
The flow across a saturated soil is given by Darcy's law:
Vs  K i (1)
Where:
V s = Velocity through porous media

274 Aseel A. A. Al-Katib, Haider A. A. Al-Katib, Hayder H. Alkhudery

 International Journal of Engineering Technology Science and Research
IJETSR
www.ijetsr.com
ISSN 2394 – 3386
Volume 5, Issue 4
April 2018

K = Hydraulic conductivity
 dh
i = Hydraulic gradient =
dl
h = Piezometric head
l = Distance along the flow line
Darcy's law is valid when Reynolds number is taken equal to or less than unity, or
VD 
Re   1 (2)

Where
Re = Reynolds number.
V = Discharge velocity.
D = Average of diameter of soil particles.
 = Density of fluid, and
 = Dynamic viscosity
Fortunately, most of practical seepage flow under dam is laminar (Re‹1) [3].

3. THE ANISOTROPY SOIL AND ISOTROPY:

If an x y coordinates is the coordinate Direction , the hydraulic conductivity values in the directions is
specified as Kx, and Ky, another point or any point(x, y) an isotropic caseis Kx = Ky, an anisotropic caseisKx ≠
Ky.

4. THE HYDRAULIC CONDUCTIVITY:

The conductivity in the two dimensional cases Is in the maximum and minimum values along the axes, are
principal axis. Other directions through the domain of hydraulic conductivity are between the principal values
are given[3] with the principal values making the major and minor axis. the flow under hydraulic structures at
anisotropic soil foundation, where the flow is in the (x, y) coordinate axes makes an angle β with the
principal axes of conductivity of the soil, the coordinate system points(µ, λ) is consider the principal axes of
hydraulic conductivity,hydraulic conductivity and axis rotationis shown
in figure (1).
 Y µ

k max
k min

 

Fig.(1) Hydraulic conductivity and axis rotation,[5].

275 Aseel A. A. Al-Katib, Haider A. A. Al-Katib, Hayder H. Alkhudery

 International Journal of Engineering Technology Science and Research
IJETSR
www.ijetsr.com
ISSN 2394 – 3386
Volume 5, Issue 4
April 2018

5. EQUATION OF FLOW:
The analysis of the seepage velocity through soilin the law of Darcy for Two-dimensional flow are [2]:

H
u  k (3)
x x

H
v  k y (4)
y

where:
u, v = Velocity components in the horizontal x direction, andvertical y direction.
kx , ky= Hydraulic conductivity in the x- and y directions. The continuity equation for two-dimensional
of flow is following:

u v
 0 (5)
x y
Substitute the law of Darcy, eq.(3-3), in eq.(3-4) gets the following:
  H    H 
 k    k   0 (6)
x x x  y y y 

For a homogenous and isotropic soil, the hydraulic conductivity is equal in all the directions, is:
kx = ky = k
Thus, eq.(3-5) is:

2 H 2 H
 0 (7)
 x2  y2
The continuity equation for seepage flow in anisotropic soil is[1]:
 
q  q  0 (8)
x y
x y

Where:
q x , and q y are seepage fluxes in x and y direction respectively and are given in equation (8).

6. SLIDE PROGRAM:
Slide V.5.0 is a finite element based analysis of seepage , for saturated/unsaturated, steady flow
conditions,the seepage analysis by slideis shown in figure (2).

276 Aseel A. A. Al-Katib, Haider A. A. Al-Katib, Hayder H. Alkhudery

 International Journal of Engineering Technology Science and Research
IJETSR
www.ijetsr.com
ISSN 2394 – 3386
Volume 5, Issue 4
April 2018

Start program

Add external boundary

Add material boundary

Assignmaterial boundary

Define material properties

Mode of analysis

Ground water

RuCoefficie Water surface Finite element method

nt
Mesh setting

Refine mesh

Define material boundary

condition

Compute

Interpret

Show the results

Fig. (2) The seepage analysis by slide program [6].

277 Aseel A. A. Al-Katib, Haider A. A. Al-Katib, Hayder H. Alkhudery

 International Journal of Engineering Technology Science and Research
IJETSR
www.ijetsr.com
ISSN 2394 – 3386
Volume 5, Issue 4
April 2018

7. HYDRAULIC STRUCTURE WITH CUT-OFF AT DOWNSTREAM:

The effect of parametric on the uplift pressure under hydraulic structure, are divided like the following:
1. Geometry parameters ( difference of soil, location of cut-off).
2. Physical parameters ( change in degree of anisotropy).

Quantity of seepage in downstream side for isotropic soil and flow vector is shown in figure (3),and the
dimension of the problemis shown in figure(4).

Fig.(5-6):Flow lines with downstream side for0.546m 3 /day

isotropic soil foundation.

Fig. (3) Quantity of seepage in downstream side for isotropic soil and flow vector.

10m

X -
X

1.8b

2b b 2b

Fig.(4) Dimension of the problem

278 Aseel A. A. Al-Katib, Haider A. A. Al-Katib, Hayder H. Alkhudery

 International Journal of Engineering Technology Science and Research
IJETSR
www.ijetsr.com
ISSN 2394 – 3386
Volume 5, Issue 4
April 2018

7-1 INCLINATION ANGLEEFFECT AND DEGREE OF ANISOTROPY SOIL:

The distribution of uplift pressure under the retaining structure for different anisotropic angles at different
inclination angles (45˚,90˚,135˚, and 180˚) are shown in Figures(5),(6),(7),and(8) respectively. It has been
found that at 180˚ angle, the distribution of uplift pressure increased with increasing the degree of anisotropy.
In regard to the 90˚ and 135˚ angles, the values of uplift pressure decrease with increase in degree of
anisotropy. In contrast, the distribution of uplift pressure for 45˚ angle increased with increasing permeability
until x/b = 0.5, then decreased with increasing permeability.
10
10 Isotropic
Isotropic kmax / kmin=2
9
9 km ax / km in=2 kmax / kmin=4
km ax / km in=4 kmax / kmin=8
8 8
km ax / km in=8 kmax / kmin=16

7 km ax / km in=16 7

Pressure head
Pressure head

6 6

5 5
H
4 H 4 H 2
H 2 1 d
3 1 d 3 x b x
x b x - T
2 T
- 2
1
1
0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Distance along floor base (x/b)

Distance along floor base (x/b)

Fig.(6) Uplift pressure distribution under

Fig.(5) Uplift pressure distribution under
hydraulic structure with
hydraulic structure with
D/S cut-off in anisotropic
D/S cut-off in anisotropic
soil at (Ө=90).
soil at (Ө=45).
10 10
Isotropic
Isotropic kmax / kmin=2
9 9
kmax / kmin=2 kmax / kmin=4
kmax / kmin=4 kmax / kmin=8
8
8 kmax / kmin=16
kmax / kmin=8
kmax / kmin=16 7
7
Pressure head

6
Pressure head

6
5
5
4 H
4 H
H 2
H 2 3
3 1 d
1 d x
x 2 x b
2
x b - T
- T
1
1
0
0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Distance along floor bace (x/b)
Distance along floor base (x/b)
Fig.(8) Uplift pressure distribution under
Fig.(7) Uplift pressure distribution under
hydraulic structure with D/S
hydraulic structure with
cut-off in anisotropic soil at
D/S cut-off in anisotropic
(Ө=180).
soil at (Ө=135).
279 Aseel A. A. Al-Katib, Haider A. A. Al-Katib, Hayder H. Alkhudery
 International Journal of Engineering Technology Science and Research
IJETSR
www.ijetsr.com
ISSN 2394 – 3386
Volume 5, Issue 4
April 2018

The distribution of uplift pressure under the hydraulic structure for different inclination angles and different
degrees of anisotropy (2,and 4) are shown in Figures(9),and (10) respectively. It can be seen from these
figures, that the distribution values of uplift pressure are maximum at 180˚,and 0˚ degree angles which are
greater than the values of uplift pressure for isotropic soil. This is attributed to the relatively large hydraulic
conductivity causing increase in uplift pressure. It is also noticed that the values of uplift pressure were
minimum at 90˚ angle. This is due to the fact that the hydraulic conductivity is small along the floor which
cause large head losses in that direction.The uplift pressure values of 45˚ angle are greater than the uplift
pressure values of 75˚ angle, as the stream lines are inclined more toward the structure floor when the angle is
45˚ causing greater values for uplift pressure. Likewise, 115˚ and 135˚ have the same effect.

10 10
Isotropic Isotropic
q = 45 q = 45
9 q = 75 9 q = 75
q = 90 q = 90
8 q = 115 8 q = 115
q = 135 q = 135
7 q = 180 7 q = 180
Pressure head

Pressure head

6 6

5 5

4 4
H H
H 2 H 2
3 3
1 d 1 d
2 x b x 2 x b x
- T - T
1 1

0 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Distance along floor base (x/b) Distance along floor base (x/b)

Fig.(9) Uplift pressure distribution under Fig.(10) Uplift pressure

hydraulic structure with D/S distribution under hydraulic
cut-off in anisotropic soil at structure with D/S cut-off in
(kmax/kmin=2). anisotropic soil at (kmax/kmin=4).

7-2 EFFECT OF LOCATION OF CUT-OFF ON UPLIFT PRESSURE:

Figure(11) illustrates the distribution of uplift pressure under the floor base of the hydraulic structure for
different locations of the cut-off. When the cut-off is at upstream, uplift pressure decreases due to increasing
head loss from increasing length of creep whenever the cut-off is far away from upstream, uplift pressure
values increase.

280 Aseel A. A. Al-Katib, Haider A. A. Al-Katib, Hayder H. Alkhudery

 International Journal of Engineering Technology Science and Research
IJETSR
www.ijetsr.com
ISSN 2394 – 3386
Volume 5, Issue 4
April 2018

10
Isotropic
9 The cut-off at U/S
The cut-off at 0.2b
8
The cut-off at 0.4b
7 The cut-off at 0.6b
Pressure head

The cut-off at 0.8b

6

4
H2
3 H1
d d d d
2 x b x
- T
1

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Distance along floor base (x/b)

Fig.(11) Uplift pressure distribution under hydraulic structure with various

locations of cut-off in isotropic soil
Table(1) Results of Quantity of Seepage (m³/s/m) for Different kmax/kmin and Constant Valueof
Inclination Angle for (45, 90, 135, 180)
kmax/kmin
θ 2 4 8 16
45 4.307E-06 2.814E-06 1.765E-06 1.065E-06
90 3.957E-06 2.371E-06 1.375E-06 0.775E-06
135 4.443E-06 2.990E-06 1.928E-06 1.195E-06
180 4.757E-06 3.356E-06 2.244E-06 1.440E-06

8. RETAINING STRUCTURE WITH CUT-OFF AT UPSTREAM

The quantity of seepage for hydraulic structures with cut-off at upstream as shown in figure(12)

0.396m 3 /day

Fig. (12) Quantity of seepage in downstream side for isotropic soil and flow vector.

281 Aseel A. A. Al-Katib, Haider A. A. Al-Katib, Hayder H. Alkhudery

 International Journal of Engineering Technology Science and Research
IJETSR
www.ijetsr.com
ISSN 2394 – 3386
Volume 5, Issue 4
April 2018

The distribution of uplift pressure for retaining structure for different degrees of anisotropy and different
inclination angles (45˚, 90˚, 135˚, and 180˚) are shown inFigures (13), (14), (15), and (16) respectively. It is
found that for 180 angle, the distribution values of uplift pressure decrease with increasing anisotropy from
those of isotropic soil.It is found that the uplift pressure values for the angles (45˚, 90˚, and 135˚) increase
when the anisotropy increases. This explained the fact that stream lines move in the direction of the structure
floor as the anisotropy increases causing greater values of the uplift pressure.
10 10
Isotropic Isotropic
9 kmax / kmin=2 9 kmax / kmin=2
kmax / kmin=4 kmax / kmin=4
8 8
kmax / kmin=8 kmax / kmin=8
7 kmax / kmin=16 7 kmax / kmin=16
Pressure head

6 Pressure head
6
5 5
4 H
4
H 2 H
3 1 H 2
d 3 1
x b x d
2 - T x x
2 b
- T
1
1
0
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Distance along floor base (x/b) Distance along floor base (x/b)

Fig. (13) Uplift pressure distribution under Fig. (14) Uplift pressure distribution under
hydraulic structure with U/S hydraulic structure with U/S cut-
cut-off in anisotropic soil at off in anisotropic soil at (Ө=90)
(Ө=45)
10 10
Isotropic Isotropic
9 H kmax / kmin=2 9 kmax / kmin=2
H H
2 kmax / kmin=4 kmax / kmin=4
8 H 2
1 d 8 kmax / kmin=8
kmax / kmin=8 1 d
x b x x kmax / kmin=16
7 x
- T kmax / kmin=16 7 b
- T
Pressure head

6
Pressure head

6
5 5
4
4
3 3
2
2
1 1
0
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Distance along floor base (x/b) Distance along floor base (x/b)

Fig. (15) Uplift pressure distribution under Fig. (16) Uplift pressure distribution under
hydraulic structure with U/S cut-off in
hydraulic structure with U/S cut-off in
anisotropic soil at (Ө=180)
anisotropic soil at (Ө=135)

282 Aseel A. A. Al-Katib, Haider A. A. Al-Katib, Hayder H. Alkhudery

 International Journal of Engineering Technology Science and Research
IJETSR
www.ijetsr.com
ISSN 2394 – 3386
Volume 5, Issue 4
April 2018

Figures(17)and (18) illustrate the distribution of uplift pressure under the structure for different inclination
angles andfor two different degrees of anisotropy (2, and 4) respectively. It can be seen that the values of
uplift pressure for 180˚ angle is lower than uplift pressure values of isotropic soil, since the hydraulic
conductivity will be smaller along the cut-off causing major reduction in head lossesof that direction.For 90˚
angle, the uplift pressure values will be maximum and so greater than the uplift pressure values of isotropic
soil, because conductivity is greater in the direction of the cut-off causing minor reduction in head losses in
that direction and consequently high values of uplift pressure.It is realized that the values of uplift pressure for
angles less than 180˚ angle will be greater than the values of uplift pressure for isotropic soil. This is due to
the stream lines which approach toward the structure floor causing increase in the uplift pressure values.
10
10 Isotropic
Isotropic
9 H q = 45
9 H q = 45
q = 75
q = 75
H 2
H 2 8 q = 90
8 1 q = 90
1 d
d x x q = 115
x x q = 115 7 b
7 b - T q = 135
- T q = 135 Pressure head q = 180
6
Pressure head

6 q = 180

5
5
4
4
3
3
2
2
1
1
0
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Distance along floor base (x/b)
Distance along floor base (x/b)

Fig.(18) Uplift pressure distribution

Fig. (17) Uplift pressure distribution under hydraulic structure
underhydraulicstructure with U/S cut-off in anisotropic
with U/S cut-off in soil at (kmax/kmin=4).
anisotropic soil at
(kmax/kmin=2).

Table(2) Results of Quantity of Seepage (m³/s/m) for Different kmax/kmin and Constant Value of
Inclination Angle for (45, 90, 135, 180)

kmax/kmin
θ 2 4 8 16

45 3.532E-06 2.234E-06 1.316E-06 0.7123E-06

90 3.235E-06 1.880E-06 1.040E-06 0.544E-06

135 3.717E-06 2.505E-06 1.616E-06 1.001E-06

180 3.986E-06 2.805E-06 1.860E-06 1.182E-06

283 Aseel A. A. Al-Katib, Haider A. A. Al-Katib, Hayder H. Alkhudery

 International Journal of Engineering Technology Science and Research
IJETSR
www.ijetsr.com
ISSN 2394 – 3386
Volume 5, Issue 4
April 2018

9. RETAINING STRUCTURE WITH CUT-OFFS AT UPSTREAM AND DOWNSTREAM

The quantity of seepage is 0.501m is shown in figure(19)

0.501m 3 /day

Fig. (19) Quantity of seepage in downstream side for isotropic soil and flow vector.

The distribution of uplift pressure under the retaining structure with upstream and downstream cut-offs for
different degrees of anisotropy and different inclination angles (45˚,90˚,135˚, and 180˚) are shown in
Figures(20),(21),(22),and(23) respectively. It is found that the distribution curves of the uplift pressure meet in
one point because of the combined effect of the cut-offs that change the physical characteristics of the flow
through the porous medium. The meeting point is changing from one case to another depending on the value
of the inclination angle and the degree of anisotropy.It can be seen from figure (23) that at 180˚ angle, the
meeting point will be when x/b = 0.5, and the distribution of uplift pressure before the meeting point decrease
with increasing anisotropy. In contrast, they increase with increasing anisotropy after the meeting point.Figure
(22) illustrates that at 135˚ angle, the meeting point will be happened when x/b = 0.2, and the distribution of
uplift pressure before the meeting point increase and after the meeting point decreases with increasing degree
of anisotropy.Figure (21) shows that at 90˚ angle, the meeting point will be occured when x/b = 0.5. The
values of uplift pressure before the meeting point increase with increasing degree of anisotropy, while after
the meeting point the uplift pressure values decrease with increasing of anisotropy.Figure (20) shows that
when the inclination angle is 45˚, the meeting point will be at x/b = 0.85. The values of uplift pressure
increase before the meeting point and thereafter decrease.

284 Aseel A. A. Al-Katib, Haider A. A. Al-Katib, Hayder H. Alkhudery

 International Journal of Engineering Technology Science and Research
IJETSR
www.ijetsr.com
ISSN 2394 – 3386
Volume 5, Issue 4
April 2018

10 10
Isotropic
Isotropic
9 kmax / kmin=2 9 kmax / kmin=2
kmax / kmin=4 kmax / kmin=4
8
kmax / kmin=8 8 kmax / kmin=8
7 kmax / kmin=16
kmax / kmin=16
7
Pressure head

Pressure head
6
5
H 5
4 H
H 2 2
H
3 1 d 4 1
d d d
x b x x x
3 b
2 - T
- T
1 2

0 1
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Distance along floor base (x/b) Distance along floor base (x/b)

Fig. (21) Uplift pressure distribution under

Fig. (20) Uplift pressure distribution under hydraulic structure with U/D
hydraulic structure with U/D cut-offs in anisotropic soil at
cut-offs in anisotropic soil at (Ө=90).
(Ө=45).

10 10
Isotropic Isotropic
9 kmax / kmin=2 9 kmax / kmin=2
kmax / kmin=4
8 kmax / kmin=4 8
kmax / kmin=8
kmax / kmin=8
7 7 kmax / kmin=16
kmax / kmin=16
6 6
Pressure head

Pressure head

5 5

4 H
4 H
H 2
H 2
3 1
d d 3 1 d
x x d
b x x
2 - T 2 b
- T
1 1

0 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Distance along floor base (x/b) Distance along floor base (x/b)

Fig. (22) Uplift pressure distribution under Fig.(23) Uplift pressure distribution under
hydraulic structure with U/D hydraulic structure with U/D
cut-offs in anisotropic soil at cut-offs in anisotropic soil at
(Ө=135). (Ө=180).
285 Aseel A. A. Al-Katib, Haider A. A. Al-Katib, Hayder H. Alkhudery
 International Journal of Engineering Technology Science and Research
IJETSR
www.ijetsr.com
ISSN 2394 – 3386
Volume 5, Issue 4
April 2018

Figures(24),and (25) illustrate the distribution of uplift pressure under the hydraulic structure with cut-off at
upstream and downstream for different inclination angles andfor different degrees of anisotropy (2, and 4)
respectively.It can be seen that at 180˚ angle, the uplift pressure values are smaller than those of isotropic soil
till x/b = 0.5, thereafter they are greater. In contrast, at 90˚ angle, the values are greater than those of isotropic
soil till x/b = 0.5, thereafter smaller.The values of uplift pressure at 45˚ angle are a little bit higher than those
of isotropic soil, while those at 75˚ angle are greater than those of isotropic soil and those seen in 45˚ angle.
The same thing is noticed in 115˚ and 135˚ angles.

10 10
Isotropic Isotropic
q = 45 q = 45
9 9
q = 75 q = 75
8 q = 90 8 q = 90
q = 115 q = 115
7 q = 135 7 q = 135
q = 180 q = 180
Pressure head

Pressure head
6 6

5 5

4 H 4 H
H 2 H 2
3 1 3 1
d d d d
x b x x b x
2 2
- T - T
1 1

0 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Distance along floor base (x/b) Distance along floor base (x/b)

Fig. (24) Uplift pressure distribution under Fig. (25) Uplift pressure distribution under
hydraulic structure with U/D hydraulic structure with U/D
cut-offs in anisotropic soil at cut-offs in anisotropic soil at
(kmax/kmin=2). (kmax/kmin=4).

9-1 EFFECT OF DEPTH OF CUT-OFFS ON UPLIFT PRESSURE:

The effect of depth is changing in cut-off at upstream from depth in cut-off at downstream on uplift
pressurewhichis shown inFigures(26).It can be seen that when the depth of cut-off at upstream is greater than
that at downstream.
Table(3) Results of Quantity of Seepage (m³/s/m) for Different kmax/kmin and Constant Value of
Inclination Angle for (45, 90, 135, 180).

kmax/kmin
θ 2 4 8 16
45 4.014E-06 2.660E-06 1.687E-06 1.026E-06
90 3.683E-06 2.232E-06 1.307E-06 0.744E-06
135 4.016E-06 2.663E-06 1.692E-06 1.032E-06
180 4.289E-06 2.958E-06 1.927E-06 1.208E-06

286 Aseel A. A. Al-Katib, Haider A. A. Al-Katib, Hayder H. Alkhudery

 International Journal of Engineering Technology Science and Research
IJETSR
www.ijetsr.com
ISSN 2394 – 3386
Volume 5, Issue 4
April 2018

10.CONCLUSIONS:
The following conclusions are reached at the end of this study:
1. The values of uplift pressure under structure with cut-off at downstream at 180˚, and 0˚ angles will be a
maximum and greater than those of isotropic soil. In contrast, they are minimum at 90˚ angle, and they are
smaller than those of isotropic soil.
2. The maximum distribution of uplift pressure under the structure with cut-off at upstream will be at 90˚
angle, and they are greater than those of isotropic soil. The smallest values are seen at 180˚ angle, however
they are smaller than those of isotropic soil.

9
Is otropic
8 d2 / d1 = 0.5
d2 / d1 = 0.8
7
d2 / d1 = 2
d2 / d1 = 4
6
Pressure head

4
H2
H1
3
d d
1 2
2 x b -
x T
1

0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Distance along floor base (x/b)

Fig. (26) Uplift pressure distribution under retaining structure withU/D cut-
offs in isotropic soil for various d2/d1

3. The values of uplift pressure under the structure with cut-off at downstream at 180˚ angle increased by
increasing anisotropy, while at 90˚, and 135˚ angles, they decreased by increasing anisotropy. In contrast, they
increase by increasing anisotropy till x/b = 0.5, thereafter decrease in case of 45˚ angle.
4. The values of uplift pressure under the structure with cut-off at upstream at 180˚, and 0˚ angles decrease by
increasing anisotropy, while they increase in other angles.
5. The distribution of uplift pressure for the structure with cut-offs at upstream and downstream meet in one
point and the position of this point depends on the degree of anisotropy and the inclination angle at 180˚, and
0˚ angle, the values of uplift pressure before the meeting point decreased by increasing anisotropy while after
the meeting point, the increase by increasing anisotropy. In regards to the other angles, the values of uplift
pressure before the meeting point increase by increasing anisotropy, and thereafter decrease will happen by
increasing anisotropy.
6. The distribution of uplift pressure under the structure with cut-offs at upstream and downstream will be
minimum at 180˚, and 0˚ angles. The values are smaller than those of isotropic soil before the meeting point,
and greater after the meeting point. The maximum values will be at 90˚ angle, and these before the meeting
point are greater than those of uplift pressure for isotropic soil, while after the meeting point, they are smaller
than those of isotropic soil.

287 Aseel A. A. Al-Katib, Haider A. A. Al-Katib, Hayder H. Alkhudery

 International Journal of Engineering Technology Science and Research
IJETSR
www.ijetsr.com
ISSN 2394 – 3386
Volume 5, Issue 4
April 2018

REFERENCES
[1]Abdrabo, F., 1982, “Soil Mechanices and Foundation Engineering”, Vol.2, Alexandria University, Published by rateb-
Beirut.
[2]Freeze, R. A., and Cherry, A., 1979, “Ground Water”, Prentice-Hill, Englewood Cliffs. U.S.A.
[3]Harr, M. E., 1962, “Ground Water and Seepage”, Mc Graw-Hill Book Company.
[4]Holts, R. D., and Kovacs, W. D., 1981, “An Introduction to Geotechnical Engineering”, Prentice-Hill, Inc.
Newyersey.
[5]Al-Saadi, S. I., 1998, “Numerical Analysis of Seepage Problems with Flow Control Devices Underneath Hydraulic
Structures”, Ph.D. Thesis in Water Resources Engineering, University of Technology.
[6]Al-Turrfy, U. A., 2009, “Stability Analysis of Earth Dams: Haditha Dam As A Case Study”, Ms.c.. Thesis in civil
Engineering, University of Babylon.

288 Aseel A. A. Al-Katib, Haider A. A. Al-Katib, Hayder H. Alkhudery

View publication stats