Thermodynamics: An Engineering Approach, 6th Edition

Yunus A. Cengel, Michael A. Boles

McGraw-Hill, 2008

Chapter 14
GAS–VAPOR MIXTURES
AND AIR-CONDITIONING

Mehmet Kanoglu

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
Objectives
• Differentiate between dry air and atmospheric air.
• Define and calculate the specific and relative
humidity of atmospheric air.
• Calculate the dew-point temperature of
atmospheric air.
• Relate the adiabatic saturation temperature and
wet-bulb temperatures of atmospheric air.
• Use the psychrometric chart as a tool to
determine the properties of atmospheric air.
• Apply the principles of the conservation of mass
and energy to various air-conditioning processes.

2
DRY AND ATMOSPHERIC AIR
Atmospheric air: Air in the atmosphere containing
some water vapor (or moisture).
Dry air: Air that contains no water vapor.
Water vapor in the air plays a major role in human
comfort. Therefore, it is an important consideration
in air-conditioning applications.

The cp of air can be

Water vapor in air behaves as if it existed alone assumed to be constant
and obeys the ideal-gas relation Pv = RT. Then the at 1.005 kJ/kg · °C in the
atmospheric air can be treated as an ideal-gas temperature range 10
mixture: to 50°C with an error
under 0.2%.

Pa Partial pressure of dry air

Pv Partial pressure of vapor (vapor pressure)
3
 For water h = h(T ) since water
hg = 2500.9 kJ/kg at 0°C vapor is an ideal gas
cp,avg = 1.82 kJ/kg · °C at 10 to 50°C range

In the temperature range

10 to 50°C, the hg of
water can be determined
from this equation with
negligible error.

Below 50°C, the h = const. lines

coincide with the T = const. lines in the
superheated vapor region of water. 4
 SPECIFIC AND RELATIVE HUMIDITY OF AIR
Absolute or specific humidity
(humidity ratio): The mass of water
vapor present in a unit mass of dry air.

For saturated air, the vapor

pressure is equal to the saturation
pressure of water.

Saturated air: The air saturated with

moisture.
Relative humidity: The ratio of the
amount of moisture the air holds (mv) to the
maximum amount of moisture the air can
hold at the same temperature (mg).

The difference between specific

and relative humidities. 5
 What is the relative humidity
of dry air and saturated air?

In most practical applications, the

amount of dry air in the air–
water-vapor mixture remains
constant, but the amount of water
vapor changes.
Therefore, the enthalpy of
atmospheric air is expressed per
unit mass of dry air.

The enthalpy of moist (atmospheric) air is

Dry-bulb temperature: expressed per unit mass of dry air, not per
The ordinary temperature unit mass of moist air.
of atmospheric air. 6
DEW-POINT
TEMPERATURE
Dew-point temperature Tdp:
The temperature at which
condensation begins when the air
is cooled at constant pressure
(i.e., the saturation temperature of
water corresponding to the vapor
pressure.)

Constant-presssure cooling of moist

air and the dew-point temperature on
the T-s diagram of water.

When the temperature of a

cold drink is below the dew-
point temperature of the
surrounding air, it “sweats.” 7
ADIABATIC SATURATION AND
WET-BULB TEMPERATURES

The specific humidity (and relative

humidity) of air can be determined from
these equations by measuring the pressure The adiabatic saturation
and temperature of air at the inlet and the process and its representation
exit of an adiabatic saturator. on a T-s diagram of water. 8
The adiabatic
saturation process
is not practical. To
determine the
absolute and
relative humidity of
air, a more practical
approach is to use
a thermometer
whose bulb is
covered with a
cotton wick
saturated with
water and to blow
air over the wick.
The temperature
measured is the A simple arrangement to measure Sling psychrometer
wet-bulb the wet-bulb temperature.
temperature Twb
and it is commonly For air–water vapor mixtures at atmospheric
used in A-C pressure, Twb is approximately equal to the
applications. adiabatic saturation temperature.
9
 THE PSYCHROMETRIC CHART
Psychrometric charts: Present moist air properties in a convenient form. They are
used extensively in A-C applications. The psychrometric chart serves as a valuable
aid in visualizing the A-C processes such as heating, cooling, and humidification.

For saturated air, the dry-bulb, wet-bulb,

Schematic for a psychrometric chart. and dew-point temperatures are identical.
10
Today, modern air-conditioning systems can heat, HUMAN COMFORT
cool, humidify, dehumidify, clean, and even
deodorize the air–in other words, condition the air to AND AIR-
peoples’ desires. CONDITIONING
The rate of heat generation by human body
depends on the level of the activity. For an average
adult male, it is about 87 W when sleeping, 115 W
when resting or doing office work, and 440 W when
doing heavy physical work.
When doing light work or walking slowly, about half
of the rejected body heat is dissipated through
perspiration as latent heat while the other half is
dissipated through convection and radiation as
sensible heat.
We cannot
change the
weather, but we
can change the A body feels comfortable when
climate in a it can freely dissipate its waste
confined space heat, and no more.
by air-
conditioning. 11
In an environment at 10°C with 48 The comfort of the human body
km/h winds feels as cold as an depends primarily on three factors: the
environment at -7°C with 3 km/h (dry-bulb) temperature, relative
winds as a result of the body- humidity, and air motion.
chilling effect of the air motion (the The relative humidity affects the
wind-chill factor). amount of heat a body can dissipate
through evaporation. Most people
prefer a relative humidity of 40 to 60%.
Air motion removes the warm, moist air
that builds up around the body and
replaces it with fresh air. Air motion
should be strong enough to remove
heat and moisture from the vicinity of
the body, but gentle enough to be
unnoticed.
An important factor that affects human
comfort is heat transfer by radiation
between the body and the surrounding
surfaces such as walls and windows.
Other factors that affect comfort are air
cleanliness, odor, and noise.
A comfortable environment.
12
AIR-CONDITIONING PROCESSES
Maintaining a living space or an
industrial facility at the desired
temperature and humidity requires
some processes called air-
conditioning processes.
These processes include simple
heating (raising the temperature),
simple cooling (lowering the
temperature), humidifying (adding
moisture), and dehumidifying
(removing moisture).
Sometimes two or more of these
processes are needed to bring the
air to a desired temperature and
humidity level.
Air is commonly heated and
humidified in winter and cooled and
dehumidified in summer. Various air-conditioning processes.

13
Most air-conditioning processes can be modeled as steady-flow
processes with the following general mass and energy balances:

Mass balance

Energy balance

The work term usually consists of the fan work input, which is
small relative to the other terms in the energy balance relation.

14
Simple Heating and Cooling ( = constant)
Many residential heating systems consist of a stove, a heat pump, or an electric
resistance heater. The air in these systems is heated by circulating it through a
duct that contains the tubing for the hot gases or the electric resistance wires.
Cooling can be accomplished by passing the air over some coils through which a
refrigerant or chilled water flows.
Heating and cooling appear as a horizontal line since no moisture is added to or
removed from the air.
During simple cooling, specific
Dry air mass balance
humidity remains constant, but
Water mass balance relative humidity increases.
Energy balance

During simple heating, specific humidity remains

constant, but relative humidity decreases. 15
Heating with Humidification
Problems with the low relative humidity resulting from simple heating can be
eliminated by humidifying the heated air. This is accomplished by passing the air
first through a heating section and then through a humidifying section.

16
Cooling with Dehumidification
The specific humidity of air remains constant during a simple cooling process,
but its relative humidity increases. If the relative humidity reaches undesirably
high levels, it may be necessary to remove some moisture from the air, that is,
to dehumidify it. This requires cooling the air below its dew-point temperature.

17
In desert (hot and dry) climates, we can Evaporative Cooling
avoid the high cost of conventional
cooling by using evaporative coolers, This process is essentially identical
also known as swamp coolers. to adiabatic saturation process.
As water evaporates, the latent heat of
vaporization is absorbed from the water
body and the surrounding air. As a result,
both the water and the air are cooled
during the process.

Water in a porous jug left in an open,

breezy area cools as a result of
evaporative cooling.
18
Adiabatic Mixing of Airstreams
Many A-C applications require the mixing of
two airstreams. This is particularly true for
large buildings, most production and process
plants, and hospitals, which require that the
conditioned air be mixed with a certain fraction
of fresh outside air before it is routed into the
living space.

When two airstreams at states 1 and 2

are mixed adiabatically, the state of the
mixture lies on the straight line
connecting the two states.
19
 Wet Cooling Towers
Power plants, large air-conditioning
systems, and some industries
generate large quantities of waste
heat that is often rejected to cooling
water from nearby lakes or rivers.
In some cases, however, the cooling
water supply is limited or thermal
pollution is a serious concern.
In such cases, the waste heat must
be rejected to the atmosphere, with
cooling water recirculating and
serving as a transport medium for
heat transfer between the source
and the sink (the atmosphere).
One way of achieving this is through An induced-draft counterflow cooling tower.
the use of wet cooling towers.
A wet cooling tower is essentially a
semi-enclosed evaporative cooler.

20
Natural-draft cooling tower: It looks like a large chimney and works like an
ordinary chimney. The air in the tower has a high water-vapor content, and thus
it is lighter than the outside air. Consequently, the light air in the tower rises, and
the heavier outside air fills the vacant space, creating an airflow from the bottom
of the tower to the top.
Spray pond: The warm water is sprayed into the air and is cooled by the air as
it falls into the pond,
Cooling pond: Dumping the waste heat into a still pond, which is basically a
large artificial lake open to the atmosphere.

A natural-
A spray pond.
draft
cooling
tower.

21
 Summary
• Dry and atmospheric air
• Specific and relative humidity of air
• Dew-point temperature
• Adiabatic saturation and wet-bulb temperatures
• The psychrometric chart
• Human comfort and air-conditioning
• Air-conditioning processes
 Simple heating and cooling
 Heating with humidification
 Cooling with dehumidification
 Evaporative cooling
 Adiabatic mixing of airstreams
 Wet cooling towers

22