Smart Security System

User Guide
WIFI+GSM/3G+GPRS

ARM DISARM

Android App Store

Scan the QR codes to download APP

ARM DISARM
Table of content
About Your Security System 1~2

General 1
Features 1
General Information 2

SYSTEM OVERVIEW 3~8

About the Panel 3

About the Backlight Indicators of Panic Key 4
Wiring Over view 4
Hardwired Zone Connections 5
Home Screen 5
About the Home Screen Display 6
Quick View of Menu Functions 7~8

The First Usage 9~13

Set up 9
Setting Phone Numbers 9
Wireless Keys 10
Wireless Sensors 10
RFID Tags 11
Pairing with Wireless Siren 12
Alarm Syncing with Wireless Switch 12
Home Automation 12
Meassage Recording 13
Arm/Disarm Automatically 13

Mobile APP 14

Remote SMS 14~16

How to set the parameters via SMS 14
The alarm SMS notification prefix 15
How to set the customized Zone Name 15
Get the settings via remote SMS 15
Quer y the system settings 15
Quer y the second page of system settings 15
Table of content About Your Security System

About Your Security System

Quer y the Phone Number Settings 16
General
How to make a call via the panel 16 This system offers you three forms of protection: burglar y, fire, and
emergency, depending on the configuration of your system. The system
SECURING THE PREMISES 16 consists of a touch panel control for system operation, various sensors
that provide perimeter and interior burglar y protection , and optional
Arming the System 17 smoke ,combustion or carbon monoxide detectors to provide early fire
Arming in Stay Mode 17 or dangerous environment warning. In addition, wireless keys or optional
Disarming the System 18 RFID tags allow you to control the system away from the touch panel
control.
SOS

Multi-Mode Alarm Feature 18

Features
SYSTEM TROUBLES 18
 2.4-inch Color Graphic Screen
SMS Notification Feature 18
 Voice Announcement
Two-Way Voice Feature 18  Multi-language
Voice Dialog 18  Built-in Sounder and External Sounder
The Phone Programmed Call the Panel 18  3 Hardwire Zones(EOLR)
 Up to 90 Wireless Zones and Keys
Specifications 19
 Up to 10 RFID tags
 Exit Alarm
 Sensors Low Battery Alarm
 Event Log Storage
 Phone Number
 Built-in Case Tamper
 GSM/3G Cellular and Wi-Fi Communications
 Support Up to 8 Smart Sockets

1
 About Your Security System SYSTEM OVERVIEW

General Information SYSTEM OVERVIEW

Burglar y Protection
About the Panel
Your system provides two modes of burglar y protection: STAY and
AWAY. STAY mode protects the perimeter only, allowing you to freely 1
move inside the premises. AWAY mode protects the entire system.
Both modes provide an entr y delay time that allows you to reenter the
premises without setting off an alarm.。
Zone
2
Your system's sensing devices have been assigned to various "zones."
For example, the sensing device on your entr y/exit door may have
been assigned to zone 01, sensing devices on windows in the master 6
bedroom to zone 02, and so on. These numbers appear on the display 7
when an alarm or trouble condition occurs.
3
8
Exit/Entr y Delays
9
Your security system has been programmed with delay times that
allow you to exit the premises after arming, and to disarm the system
upon entr y, before an alarm occurs. If you leave the premises too late
when exiting, or disarm too late when arriving home, it will cause a
4 5
false alarm. If an alarm occurs, you should disarm the system
immediately.
Exit Alarms: Index Item Description
The security system will generate a Door/Window Open alarm, and
2.4＂TFT Display screen. Displays system status
display “Door/Window Open”when you leave the premises and 1 Display Window
icons and information, time, zone(s) alarm
forget to close the door or window after the exit delay expires. information and user menus.
2 Speaker Alarms and confirmation sounds.
Alarms
Press to generate a Panic Alarm in case
When an alarm occurs,both the built-in and external sounders will 3 Panic Key
of fire or personal emergency.
sound until the system is disarmed or until alarm bell timeout occurs,
Press to arm the entire burglar y system,
and a message on the display will identify the zone(s) causing the perimeter and interior.
alarm. Your system may also have been programmed to automatically Away/Stay Arm Press twice to arm perimeter portion programmed
4
Button for “Stay Arm Active” of burglar y system only.
send alarm messages and voice via the cellular/GSM/GPRS/3G Interior protection is not armed,which allows
network, and push alarm notification to your mobile app. In movement within premises without causing alarm.
Press to disarm the system and to clear alarm.
addition,if your system is connected to a central monitoring 5 Disarm Button
Press twice to clear trouble display of accessories.
station,an alarm message will be sent.To stop the alarm sounding,you Scroll Up/Function/
6 Scroll up to the desired function or menu.
Page Up Button
simply disarm the system.
Scroll Down/Backspace/
7 Scroll down to the desired function or menu.
Menu Page Down Button
Buttons Cancel/Back
8 Return to the previous screen.
Button

9 Enter Button Select option or enter to the next screen.

2 3
 SYSTEM OVERVIEW SYSTEM OVERVIEW

About the Backlight Indicators of Panic Key Hardwired Zone Connections

Zone 1、Zone 2 and Zone 3 are the EOLR supervised zones that supports both open circuit
and closed circuit devices and has a response time of 300msec . Maximum zone resistance:
11000 ohms,plus EOLR
WHAT YOU SEE WHAT IT MEANS
Connect closed circuit devices in series in the high (+) side of the loop. The EOL resistor
Blinking alternately System is in Alarm
must be connected in series with the devices, following the last device.
Pulse System is Armed Connect open circuit devices in parallel across the loop. The 10000-ohm EOLR must be
Steady System is Disarmed connected across the loop at the last device.
Refer to the Hardwired Zones Connections diagram.

Wiring Over view

2

the Hardwired Zones Connections Diagram

3
1 ! EOLR(End of Line Resistor): If the EOLR is not at the end of the loop, the
4 zone will not be properly super vised, and the system may not respond
to an open circuit on the zone.

Home Screen

Index Description
1 Power Supply Receptacle
2 Backup Batter y Switch
3 SIM card Receptacle
EOLR Hardwired Zones Connections, refer
9
to section 2.3 and the Hardwired Zones 10
4
Connections diagram
5 Tamper Switch

4 5
 SYSTEM OVERVIEW SYSTEM OVERVIEW

About the Home Screen Display Quick View of Menu Functions

Factor y
No SIM card present or SIM card faulty Icon and Caption Description Defaults
Used to set Exit Delay
Exit Delay 40 seconds
Connected to ser ver 0~65535, unit: second
3 GSM
Status RSSI level signal strength Used to set Entr y Delay
Signal strength is displayed by a series of 1 Delay Entr y Delay 0~65535, unit: second
30 seconds
to 5 bars ( weak to strong) ,and bars are gray if
not registered with cell network Used to set Siren Duration
1 Siren Duration 3 minutes
Indicates that the system is connected to a 0~65535, unit: minute
Top Status Bar

Wi-Fi WiFi source and the signal strength.

4 Indicates that the system is connected to the Enable/Disable Arm and
Status Arm Beep Enable
Disarm Beep (1)
ser ver if dot is displayed.
SMS Sending Enable/Disable Alarm
5 Siren Continuous Siren when Enable
Calling an alarm occurs

6 Enable/Disable SMS
Keypad Locked notification when arm Disable
Arm SMS
AC Powered or disarm
7 Power Displayed when the system has lost AC power. Enable/Disable Keypad
Keypad Lock Disable
Status The icon is red when the system’s backup Lock (2)
Switch
batter y power is low.
Enable/Disable Keypad
Backlight Enable
8 Clock 08:45 Real-time Clock Backlight (3)

2 9 Date, time and week Enable/Disable operation

Main Menu

Settings
Keypad Tone Enable
Arm/Disarm

chime
Status Area

System is Armed Away

10 Arm/Disarm System is Armed Stay. Enable/Disable entr y and Enable

Status Delay Tick
exit chime
System is Disarmed.

Ready 08:45 Clock Door/Window Enable/Disable Exit Alarm Enable

Open Warning Warning (4)
Exit Delay
11 “Please exit” You now have xx seconds to leave the premises
Countdown Bar before the exit delay expires. When the exit Change System Code(5)
System Status Display Area

System
delay is completed, the alarm system is armed. 4 digits
Password
Entr y Delay
Countdown “Please disarm” Change User Code (6)
You must disarm the system before the entr y User
Countdown Bar 4 digits
delay expires, or an alarm will occur.

Sniffer Mode
“Synchronizing”
You must active the wireless transmitter
Countdown Bar
before the sniffer delay expires.

“Alarm” is displayed upper the red bar, and the Zone

“Alarm” is displayed in a red status bar along the red
Alarming РУССКИЙ
bar. An alarm (bell) icon along with “Alarm ”is displayed
Language Selection(7) English
alternately with the Zone that has caused the alarm. Language
Español
Polski

Italiano

Français
Português

Initialization Loading Factor y Defaults (8)

Reset Reset

6 7
 SYSTEM OVERVIEW SYSTEM OVERVIEW

Description
Used to set the first Phone Number, Enable 1.Arm Beep：When enabled, the system will announce the system status when armed or
1 Phone
st
/Disable Dialling and Enable/Disable SMS disarmed.
Used to set the second Phone Number, Enable 2.Keypad Lock：The system will lock the keypad if no operation during 30 seconds on
2 nd Phone /Disable Dialling and Enable/Disable SMS
Home Sreen. To enable the keypad, you must enter the valid User Password.
Phone
Used to set the third Phone Number, Enable
3rd Phone /Disable Dialling and Enable/Disable SMS Null 3.Backlight：If disabled, display backlight turn off after 30 seconds if no operation on Home
Used to set the fouth Phone Number, Enable Sreen.
4 th Phone /Disable Dialling and Enable/Disable SMS
4.Door/Window Open Warnings：If enabled, the system will generate a Exit Alarm Warning
Used to set the fifth Phone Number, Enable
5 th Phone /Disable Dialling and Enable/Disable SMS notification when you leaving a door or window open after the exit delay expires.
5.System Password：used for keypad unlocking and SMS remote settings.
Alarm Log Used to view system alarm events.
6.User Password：user for keypad unlocking, SMS Remote Control and Alarm text
Log

notification prefix Setting.

Arm Log Used to view system arm/disarm events.
7.Language：Voice Announcement, Displaying and SMS notification will be in the selected
Pairing, Delete or Delete All the wireless keys language. After selecting the desired language, the panel will reset.
Remote
8.Initialization：If the factor y default configuration is loaded, any data that has already
Pairing, Edit, Delete or Delete All
Detector the wireless sensors
been programmed into the system will be changed into the Factor y Default
Configuration!
RFID Pairing, Delete or Delete All the RFID tags

Add Pairing a new Wireless Key, Sensor or RFID tag

Delete/Edit
Delete a Wireless Key or RFID tag from the list The First Usage
Edit/Delete a wireless sensor from the list
Set up
Parts

Delete All Delete all the Wireless Key, Sensors or RFID tags

Siren Learn
Used to sends a transmission signal ! With the built-in WiFi Communications module, if your system is equipped to
to the wireless siren be paired.
report alarms and Remote Access via Mobile APP over the internet, your router must
Eol Zone Used to set the Zone(EOLR) Name, Type
remain powered-on at all times, and a WiFi internet connection is required.
Alarm Socket Pairing with the wireless switch With the built-in GSM/3G Communications module, if your system is equipped to
Main Menu

report alarms and Remote control via SMS or Voice Dialling, to ensure the SIM card is
Socket Pairing with the wireless switch
installed (refer to the diagram below ) and the panel must be connected to the
Airlink WiFi configuration (Requires the mobile APP). GSM/3G Cellular or to the Internet.
Wi-Fi

Unbind Unbind the Panel link from the ser ver

Used to display the MAC and IP

MAC/IP addresses of the WiFi module

Record Message Recording and Playback

Play Used to listen to the recorded message

Record

Delete Used to delete the recorded message

Used to set Record Duration

Duration 20seconds
( unit: second, 1-20 is available )
Used to set a daily time to arm automatically,
Arm Timer and Enable/Disable automation
Used to set a daily time to disarm automatically,
Disarm Timer and Enable/Disable automation AC Power Connections - Connect the Power Supply to the DC 5V receptacle, and push
Timer

the backup batter y switch to “ON”.

Disarm Timer reser ved +08:00

Date&Time Set the time and date Setting Phone Numbers

Enable/Disable using the WiFi Up to 5 User Phone Numbers used to receive the Alarm SMS notification and Audio Alarm
Wi-Fi Sync Enable
network-provided time
Verification.
Enable/Disable using the cellular
2G/3G Sync network-provided time Enable
Version

Used to display the firmware and MAC address of the WiFi module,
the firmware and IMEI of the GSM module and Serial Number of panel

8 9
 The First Usage The First Usage

Use to scroll to , then use digits keypad to enter the Zone Number (0-89 are
Select: “Main Menu Phone 1st Phone, 2 nd Phone, 3rd Phone, 4 th Phone or 5th available). The Zone Number should be unique.
Phone”, the system displays the Phone programming screen. Press ,“Synchronizing” is displayed, the system goes into the sniffer mode and
Use to scroll to , then use digits keypad to enter the Phone Number (up to count down the pairing time remaining .
18 digits). Active wireless sensor to send a transmission signal to the panel.
Use to scroll to , then use to toggle between “off”and “on”. As the serial number of wireless sensor is added to panel, “Leaning OK”will be
displayed.
When “on” is selected, the Voice Dialing Alarm will be active.
The system will display“Device code has been learnt”if serial number of wireless
Use to scroll to , then use to toggle between “off”and “on”.
sensor have been learned, and the Zone Name/Mode/Number will be refreshed.
When “on” is selected, the SMS Text Notification Alarm will be active.
Press to save your new settings.
Edit/Delete
Wireless Keys
Select ”Main Menu Parts Detector Edit”.
Pairing a New Wireless Key Use the buttons to scroll to the serial number be edited.
Select ”Main Menu Parts Remote Add”. To edit the Name/Mode/Number of displayed zone, press .
“Synchronizing” is displayed, the system goes into the sniffer mode and count down To delete the selected serial number, press .
the pairing time remaining .
Press one button of wireless key to send a transmission signal to the panel.
Delete All
As the serial number of wireless key is added to panel, “Leaning OK”will be displayed.
The system will display“Device code has been learnt”if serial number of wireless key Select ”Main Menu Parts Detector Delete All ”.
have been learned. A total number of serial numbers learned is displayed.
To delete all the serial numbers, press .

Delete
Select ”Main Menu Parts Remote Delete”. RFID Tags
Use the buttons to scroll to the serial number be deleted .
Press to delete the selected serial number. Pairing a New RFID Tag
Select ”Main Menu Parts RFID Add”.
“Synchronizing” is displayed, the system goes into the sniffer mode and count down the
Delete All pairing time remaining .
Put the tag close to the RFID area of panel.
Select ”Main Menu Parts Remote Delete All”. As the serial number of tag is added to panel, “Leaning OK”will be displayed.
A total number of serial numbers learned is displayed. The system will display“Device code has been learnt”if serial number of tag have been
To delete all the serial numbers, press . learned..

Wireless Sensors
Delete
Pairing a New Sensor
Select ”Main Menu Parts RFID Delete”.
Select ”Main Menu Parts Detector Add”.
Use the buttons to scroll to the serial number be deleted.
Use to scroll to , then use to scroll to the desired Zone Name.
Press to delete the selected serial number.
Use to scroll to , then use to scroll to the desired Zone Mode(Type).
You must assign a Zone Type to each zone(sensor), which defines the way in which the
system responds to faults in that zone.
“Stay Arm Active” usually assigned to sensors or contacts on entr y and exit doors,
exterior doors and windows, perimeter. Active when armed in AWAY or STAY mode.
“Out Arm Active ” usually assigned to a interior area (i.e.: foyer, lobby,or room). Delete All
Bypassed automatically when armed in STAY mode.
Select ”Main Menu Parts RFID Delete All”.
“24 Hours Active ” usually assigned to a zone containing an Emergency Button, Smoke
A total number of serial numbers learned is displayed.。
Sensor, CO, Water Leakage and Gas Sensors.
To used as doorbell, select “Doorbell”. To delete all the serial numbers, press
To disable the zone, select “Close”.

10 11
 The First Usage The First Usage

Meassage Recording
Pairing with Wireless Siren
Operating the Wireless Strobe Siren to go into the Sniffer mode( refer to user guide of
Message Recording and Playback
strobe siren ) .
Select “Main Menu Parts Siren Learn”.The panel displays ” Learn Signal Sent” Your system can Record/Playback/Delete a brief message(up to 20 seconds)
and sends a transmission signal to the Strobe Siren. that can be played back later. The message will be played to the remote when
The Strobe Siren gives a successful indication. a alarm call is connected.
Select “Main Menu Record Record”，the system displays the Record screen.
Ready to record when “Recording”is displayed in the title box and the system
Alarm Syncing with Wireless Switch display will count down the recording time remaining.
Speak into the microphone and the recording automatically stops after the time
Pairing with Wireless Switch expires.
The system plays back the message automatically.
Select “Main Menu Parts Alarm Socket”, the system displays the Alarm Socket
pairing screen. Press button to save the message .
Operating the Wireless Switch to go into the Sniffer mode( refer to user guide of
wireless switch ) .
Press the “on” button and the “off”button in turn , The panel displays
”Learn Signal Sent” and sends a transmission signal twice to the Wireless Switch .
The Wireless Switch gives a successful indication. Arm/Disarm Automatically
To test if pairing ok, press “on”and “off”to check if the wireless can be opened and
The feature can be used to program the system to arm or disarm the system automatically
closed.
at a daily time.

! When a sound alarm occurs, the Wireless Switch will be opened until the system is
disarmed or alarm sounder timeout occurs. Arm Schedule
Select “Main Menu Timer Arm Timer ”, the system displays the Arm Timer
programming screen.

Use to scroll to , then use digits keypad to enter the Daily Arm time (in 24-hr).
Home Automation (If equipped)
Use to scroll to , then use to select“on”.
Pairing with Wireless Switch Press to save your new settings.

To pair with the wireless switch (up to 8 switches), refer to the previous section
!
"Pairing with Wireless Switch”.To test if pairing ok, press “on”and “off”to check if
the wireless can be opened and closed.
Disarm Schedule

! You can open or close the wireless switch via Mobile APP. Select “Main Menu Timer Disarm Timer ”, the system displays the Disarm Timer
programming screen.
Use to scroll to , then use digits keypad to enter the Daily Disarm time (in 24-hr).
Use to scroll to , then use to select“on”.
Press to save your new settings.

12 13
 Mobile APP Remote SMS

Mobile APP 3、Setting the operator Access Point Name

For example:
Scan the QR codes via a smart phone to download the app. To set the APN as “internet.beeline.kz”, then the remote SMS is
*6666*92 internet.beeline.kz*.
The Smart Security System app will guide you to connect the panel to
!
the WiFi network and the internet. The alarm SMS notification prefix
Remote SMS The panel can be named after a customized text via remote SMS. The name is used for the
alarm SMS notification prefix.
How to set the parameters via SMS The alarm notification prefix setting format: 1234@XXX building.
To set the parameters via SMS, editing the setting text message as below, In this string, “1234”is the User Password ,”@”is a command flag and “XXX building ”
then sends it to the SIM number installed in the panel. Your mobile will is the customized text.
received an acknowledgement SMS if setting ok.
System
How to set the customized Zone Name
* Password
* Command1 Parameter1
* Command2 Parameter2

Note: The command must be 2 digits( e.g.,01,90,etc. ), and the header,

* You can set a customized name for each zone via remote SMS. The name is used to indentify
which zone alarm occurs in the SMS notification.
Remote SMS format: 1234@XX@Down Stairs
separator and ending character must be‘*’.。 In this string, “1234”is the User Password , two ”@”are command flags, “XX”is the
Zone Number(from 00 to 89) and “Down Stairs” is the customized text.。
Factor y
Command Function Description
Defaults
Get the settings via remote SMS
51 1st Phone Number refer to note 1 Null
Quer y the system settings
52 2 nd Phone Number refer to note 1 Null
Format is *6666*62*, and the panel echoes as follow.
53 3rd Phone Number refer to note 1 Null
SYSTEM set:
54 refer to note 1 Null
SN: Serial Number of the panel
4th Phone Number
LANGUAGE: Language
55 5 th Phone Number refer to note 1 Null ENGINEER PASSWORD: System Password
USER PASSWORD: User Password
the ser ver IP address and Only used for connection to
90 Null GSM CSQ: GSM RSSI
Port ser ver, refer to note 2
Only used for GPRS network, WIFI RSSI: Wifi RSSI
92 the GPRS APN CMNET
refer to note 3
Note: Quer y the second page of system settings
The exmples uses the default system password 6666.
Format is *6666*90*, and the panel echoes as follow.
1、The Phone Number setting format of remote text message: xxxxxxxxxx,A,B
In this sting, “xxxxxxxxxxx” is the phone number( up to 18 digits ), “A” used to
Enable(1) or Disable(0) the Alarm Voice Dialling and “B” used to Enable(1) or SYSTEM set2:
Disable(0)the Alarm SMS notification. APN: GPRS Access Point Name
For example: GPRS IP: Ser ver IP address and Port
To set the 1st Phone Number as “13912345678” and enable the SMS notification only,
NTP: reser ved
and to set 2nd Phone Number as “075512345678” and enable the Voice Dialling only,
then the remote SMS is *6666*5113912345678,0,1*52075512345678,1,0*. TIME ZONE: reser ved
SERVER： reser ved
2、 The ser ver IP address and Port used for connection to the alarm monitoring company.
The ser ver IP and Port setting format of remote text message: aaa,bbb,ccc,ddd,xxxxx
In this string, “aaa,bbb,ccc,ddd” is the IP and “xxxxx” is Port.
For example:
To set the IP and Port as “116.62.42.223:2001”, then the remote SMS is
*6666*90116,62,42,223,2001*.

14 15
 Remote SMS SECURING THE PREMISES

Quer y the Phone Number Settings Arming in Stay Mode

Format is *6666*51*, and the panel echoes as follow. This mode is used when you are staying home.
To arm the system in stay mode, you can operate as below:
PHONE set:
1: The 1st Phone Number, Voice Dialling and SMS switches By Wireless Key: Press key.
2: The 2nd Phone Number, Voice Dialling and SMS switches By Panel: Press button twice when home screen is displayed.
By APP: Press the Stay Arm icon.
3: The 3rd Phone Number, Voice Dialling and SMS switches
By remote SMS : Send a message 1234#3 (“1234”is User Password) to the panel, then an
4: The 4th Phone Number, Voice Dialling and SMS switches acknowledgement SMS will be returned if armed.
5: The 5th Phone Number, Voice Dialling and SMS switches The system will announce “System Armed”. Home Screen will displays the “Stay
REDIAL COUNTER： Redial Counter for Voice Dialling Armed”icon. If the “Arm SMS” is enabled, you will receive a SMS notification.

! Perimeter burglar y zones ( Zone Type programmed as Stay Arm Active ), such as
How to make a call via the panel windows and doors are armed.

On the home screen, you can make a call via the digit keypad.
Press to view the list of dialled number, then press to redial it.
Disarming the System
! The call will be cancelled if GSM network is not registered, the system is armed or in To disarm the system ,to silence alarm ,to clear trouble displays and to cancel the alarm
that is in progress , you can operate as below:
voice alarming.
By Wireless Key: Press key.
By Panel: Press button when home screen is displayed.
By RFID tag : Put the RFID tag close to the RFID area when system is armed.
By APP: Press the Disarm icon.
By remote SMS : Send a message 1234#2 (“1234”is User Password) to the panel,
then an acknowledgement SMS will be returned if armed.
SECURING THE PREMISES The system will announce “System Disarmed”. Home Screen will displays the
“Disarmed”icon. If the “Arm SMS” is enabled, you will receive a SMS
Arming the System notification.
To arm the system, you can operate as below:
By Wireless Key: Press key.
By Panel: Press. button when home screen is displayed. SOS
By RFID tag : Put the RFID tag close to the RFID area when system is disarmed. To manually active panic function, you can operate as below:
By APP: Press the Arm icon, then select the Exit Delay.
By Wireless Key: Press SOS key.
By remote SMS : Send a message 1234#1 (“1234”is User Password) to the panel, then an
acknowledgement SMS will be returned if armed. By Panel : Press SOS key on the panel.
By APP: Press the SOS icon.
The system will announce “System Armed”. Home Screen will displays the “Armed” Home screen displays “Panic Alarm”. An Panic Alarm will be generated.
icon and the countdown bar. You must leave the premises before the Exit Delay expires. An Panic Alarm send an text notification to your mobile ,and sounds a loud,steady alarm
If the“Arm SMS” is enabled, you will receive a SMS notification. at your panel.
! All burglar y zones, interior & perimeter, are armed.

16 17
 SECURING THE PREMISES Specifications

Multi-Mode Alarm Feature Specifications

SYSTEM TROUBLES：  Primar y Power : Plug-in Power Supply, micro USB 110/220VAC to 5VDC,
 Loss of AC Power : If the building and/or neighbourhood has lost electrical power, the 1A output
system will continue to operate on batter y forseveral hours.
 Backup batter y: 3.7V/500mAh Rechargeable Lithium Polymer Batter y
 System Low Batter y : “Low Batter y” is displayed when the system’s backup batter y
power is low.
 Consumption: <150mA@normal
 Sensor Low Batter y : Each wireless sensor in your system has an internal batter y.  Siren Output: <300mA
The system detects low batter y conditions in wireless sensors, and displays a  Radio Frequency: 315/433/868/915Mhz (optional)
“Sensor Low Batter y” message on the home screen, means that batter y replacement  RF code: eV1527
in the indicated sensor(s) is due within 7 days.
 GSM: 850/900/1800/1900MHz
 AC Power Normal .
 Wi-Fi: IEEE802.11b/g/n
 Tamper : when a cover tamper has been detected to generate a Tamper Alarm.
 Operation Temperature: 0~55℃

SMS Notification Feature

When an alarm or system trouble occurs, a SMS notification will be sent to the Phone
Number that have been programmed in your system.

Two-Way Voice Feature

Voice Dialog
When an alarm occurs, the system will dial to your Phone Number that have been
programmed in your system. After the call is connected, you can hear the voice
message that have been recorded and what the alarm occurs, then system will
announce “Press 1 to arm, press 2 to disarm, press 3 to monitor, press 4 to talk”.
Press 3 or 4 to listen the violated premises and voice dialog between an operator
and an individual at the premises. If a false alarm is ensured, press 1 to cancel the
alarm that is in progress.

The Phone Programmed Call the Panel

When the phone that have been programmed in the system call the panel, two-way voice
is connected automatically. Allows operator to listen, talk to or conduct two-way
conversations with individuals on the premises.

18 19