T.

3 Viewing the output le

For example, if STAAD.Pro encounters an instability problem during the analysis process, it will be reported in the output
le.

Note: If you did not select to open the output le after running the analysis in the previous procedure, you can open it any
time through the user interface. On the Utilities ribbon tab, select the Analysis Output tool in the View group.

Tip: By default, the output le contains a listing of the entire input also. You may choose not to print the echo of the input
commands in the Output le. On the Analysis and Design ribbon tab, select the Miscellaneous Commands > Set Echo tool
option from the menu bar and the select the Echo O option in the Set Echo dialog.

It is strongly recommended that you review the entire output le to ensure that the results are reasonable and that there are
no error messages or warnings reported, etc. Errors encountered during the analysis & design can disable access to the
post-processing mode. The information presented in the output le is a crucial indicator of whether or not the structure
satis es the engineering requirements of safety and serviceability.

PAGE NO. 1
****************************************************
* *
* STAAD.Pro CONNECT Edition *
* Version 22.03.00.** *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= JAN 6, 2020 *
* Time= 11:34:49 *
* *
* Licensed to: Bentley Systems Inc *
****************************************************
1. STAAD SPACE SLAB SUPPORTED ALONG 2 EDGES
INPUT FILE: Tutorial 3 - Analysis of a Slab.STD
2. START JOB INFORMATION
3. ENGINEER DATE 21-AUG-19
4. END JOB INFORMATION
5. UNIT METER KN
6. JOINT COORDINATES
7. 1 0 0 0; 2 2 0 0; 3 2 0 2; 4 0 0 2; 5 4 0 0; 6 4 0 2; 7 6 0 0; 8 6 0 2
8. 9 2 0 4; 10 0 0 4; 11 4 0 4; 12 6 0 4
9. ELEMENT INCIDENCES SHELL
10. 1 1 2 3 4; 2 2 5 6 3; 3 5 7 8 6; 4 4 3 9 10; 5 3 6 11 9; 6 6 8 12 11
11. UNIT CM KN
/
 12. ELEMENT PROPERTY
13. 1 TO 6 THICKNESS 30
14. UNIT KN METER
15. CONSTANTS
16. E 2.17185E+007 ALL
17. POISSON 0.17 ALL
18. DENSITY 23.5616 ALL
19. ALPHA 1E-005 ALL
20. SUPPORTS
21. 1 2 4 5 7 10 FIXED
22. UNIT METER KG
23. LOAD 1 DEAD LOAD
24. SELFWEIGHT Y -1
25. LOAD 2 EXTERNAL PRESSURE LOAD
26. ELEMENT LOAD
27. 1 TO 6 PR GY -300
28. LOAD 3 TEMPERATURE LOAD
29. TEMPERATURE LOAD
30. 1 TO 6 TEMP 40 30
31. LOAD COMB 101 CASE 1 + CASE 2
32. 1 1.0 2 1.0
33. LOAD COMB 102 CASE 1 + CASE 3
34. 1 1.0 3 1.0
35. PERFORM ANALYSIS PRINT STATICS CHECK
SLAB SUPPORTED ALONG 2 EDGES -- PAGE NO. 2
P R O B L E M S T A T I S T I C S
-----------------------------------
NUMBER OF JOINTS 12 NUMBER OF MEMBERS 0
NUMBER OF PLATES 6 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 6
Using 64-bit analysis engine.
SOLVER USED IS THE IN-CORE ADVANCED MATH SOLVER
TOTAL PRIMARY LOAD CASES = 3, TOTAL DEGREES OF FREEDOM = 36
TOTAL LOAD COMBINATION CASES = 2 SO FAR.
SLAB SUPPORTED ALONG 2 EDGES -- PAGE NO. 3
STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 1
DEAD LOAD
CENTER OF FORCE BASED ON Y FORCES ONLY (METE).
(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)
X = 0.299999999E+01
Y = 0.000000000E+00
Z = 0.199999999E+01
TOTAL APPLIED LOAD 1
***TOTAL APPLIED LOAD ( KG METE ) SUMMARY (LOADING 1 )
SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = -17298.83
SUMMATION FORCE-Z = 0.00
SUMMATION OF MOMENTS AROUND THE ORIGIN-
/
 MX= 34597.65 MY= 0.00 MZ= -51896.48
TOTAL REACTION LOAD 1
***TOTAL REACTION LOAD( KG METE ) SUMMARY (LOADING 1 )
SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = 17298.83
SUMMATION FORCE-Z = 0.00
SUMMATION OF MOMENTS AROUND THE ORIGIN-
MX= -34597.65 MY= 0.00 MZ= 51896.48
MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 1)
MAXIMUMS AT NODE
X = 0.00000E+00 0
Y = -3.20664E-01 12
Z = 0.00000E+00 0
RX= 9.80376E-04 12
RY= 0.00000E+00 0
RZ= -6.49326E-04 9
STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 2
EXTERNAL PRESSURE LOAD
CENTER OF FORCE BASED ON Y FORCES ONLY (METE).
(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)
X = 0.299999999E+01
Y = 0.000000000E+00
Z = 0.199999999E+01
SLAB SUPPORTED ALONG 2 EDGES -- PAGE NO. 4
TOTAL APPLIED LOAD 2
***TOTAL APPLIED LOAD ( KG METE ) SUMMARY (LOADING 2 )
SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = -7200.00
SUMMATION FORCE-Z = 0.00
SUMMATION OF MOMENTS AROUND THE ORIGIN-
MX= 14400.00 MY= 0.00 MZ= -21600.00
TOTAL REACTION LOAD 2
***TOTAL REACTION LOAD( KG METE ) SUMMARY (LOADING 2 )
SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = 7200.00
SUMMATION FORCE-Z = 0.00
SUMMATION OF MOMENTS AROUND THE ORIGIN-
MX= -14400.00 MY= 0.00 MZ= 21600.00
MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 2)
MAXIMUMS AT NODE
X = 0.00000E+00 0
Y = -1.33465E-01 12
Z = 0.00000E+00 0
RX= 4.08045E-04 12
RY= 0.00000E+00 0
RZ= -2.70258E-04 9
STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 3
TEMPERATURE LOAD
/
TOTAL APPLIED LOAD 3
***TOTAL APPLIED LOAD ( KG METE ) SUMMARY (LOADING 3 )
SUMMATION FORCE-X = 1.0313497E-10
SUMMATION FORCE-Y = -2.2363831E-28
SUMMATION FORCE-Z = 2.5783741E-10
SUMMATION OF MOMENTS AROUND THE ORIGIN-
MX= -7.5974110E-12 MY= 3.3531239E-10 MZ= -1.0471166E-12
TOTAL REACTION LOAD 3
***TOTAL REACTION LOAD( KG METE ) SUMMARY (LOADING 3 )
SUMMATION FORCE-X = 6.1880980E-10
SUMMATION FORCE-Y = 4.0287096E-12
SUMMATION FORCE-Z = -6.7037728E-10
SUMMATION OF MOMENTS AROUND THE ORIGIN-
MX= -1.1002438E-10 MY= 5.1973420E-09 MZ= 2.1611931E-10
SLAB SUPPORTED ALONG 2 EDGES -- PAGE NO. 5
MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 3)
MAXIMUMS AT NODE
X = 2.01178E-01 12
Y = 8.97376E-01 12
Z = 1.66238E-01 11
RX= -3.51267E-03 12
RY= -2.41811E-04 11
RZ= 2.62397E-03 12
************ END OF DATA FROM INTERNAL STORAGE ************
36. UNIT METER KN
37. PRINT ELEMENT STRESSES LIST 3
ELEMENT STRESSES LIST 3
SLAB SUPPORTED ALONG 2 EDGES -- PAGE NO. 6
ELEMENT STRESSES FORCE,LENGTH UNITS= KN METE
----------------
STRESS = FORCE/UNIT WIDTH/THICK, MOMENT = FORCE-LENGTH/UNIT WIDTH
ELEMENT LOAD SQX SQY MX MY MXY
VONT VONB SX SY SXY
TRESCAT TRESCAB
3 1 -18.13 72.86 -3.96 -20.42 -3.35
1308.65 1308.65 0.00 0.00 0.00
1404.84 1404.84
TOP : SMAX= -220.35 SMIN= -1404.84 TMAX= 592.24 ANGLE=-11.1
BOTT: SMAX= 1404.84 SMIN= 220.35 TMAX= 592.24 ANGLE= 78.9
2 -7.54 30.33 -1.65 -8.50 -1.39
544.68 544.68 0.00 0.00 0.00
584.71 584.71
TOP : SMAX= -91.71 SMIN= -584.71 TMAX= 246.50 ANGLE=-11.1
BOTT: SMAX= 584.71 SMIN= 91.71 TMAX= 246.50 ANGLE= 78.9
3 96.73 -59.42 -30.45 -14.83 18.43
10779.75 5300.97 -5044.91 -2309.55 3890.06
10912.06 5585.64
TOP : SMAX= 269.70 SMIN= -10642.36 TMAX= 5456.03 ANGLE= 55.1
/
 BOTT: SMAX= 624.69 SMIN= -4960.95 TMAX= 2792.82 ANGLE= 53.8
101 -25.67 103.19 -5.61 -28.92 -4.74
1853.33 1853.33 0.00 0.00 0.00
1989.55 1989.55
TOP : SMAX= -312.06 SMIN= -1989.55 TMAX= 838.74 ANGLE=-11.1
BOTT: SMAX= 1989.55 SMIN= 312.06 TMAX= 838.74 ANGLE= 78.9
102 78.61 13.44 -34.41 -35.24 15.08
10643.05 5713.20 -5044.91 -2309.55 3890.06
11074.60 6408.66
TOP : SMAX= -923.25 SMIN= -11074.60 TMAX= 5075.67 ANGLE= 52.7
BOTT: SMAX= 1848.79 SMIN= -4559.87 TMAX= 3204.33 ANGLE= 57.9
**** MAXIMUM STRESSES AMONG SELECTED PLATES AND CASES ****
MAXIMUM MINIMUM MAXIMUM MAXIMUM MAXIMUM
PRINCIPAL PRINCIPAL SHEAR VONMISES TRESCA
STRESS STRESS STRESS STRESS STRESS
1.989549E+03 -1.107460E+04 5.456032E+03 1.077975E+04 1.107460E+04
PLATE NO. 3 3 3 3 3
CASE NO. 101 102 3 3 102
********************END OF ELEMENT FORCES********************
38. UNIT METER KG
39. PRINT ELEMENT FORCE LIST 6
ELEMENT FORCE LIST 6
SLAB SUPPORTED ALONG 2 EDGES -- PAGE NO. 7
ELEMENT FORCES FORCE,LENGTH UNITS= KG METE
--------------
**NOTE- IF A COMBINATION INCLUDES A DYNAMIC CASE OR IS AN SRSS OR ABS COMBINATION
THEN RESULTS CANNOT BE COMPUTED PROPERLY.
GLOBAL CORNER FORCES
JOINT FX FY FZ MX MY MZ
ELE.NO. 6 FOR LOAD CASE 1
6 0.0000E+00 4.5324E+02 0.0000E+00 -1.1313E+03 0.0000E+00 7.9082E+02
8 0.0000E+00 5.0615E+02 0.0000E+00 -3.2050E+02 0.0000E+00 2.3979E+02
12 0.0000E+00 -7.2078E+02 0.0000E+00 1.7191E-12 0.0000E+00 -6.5491E-12
11 0.0000E+00 -2.3860E+02 0.0000E+00 -4.6695E+02 0.0000E+00 -6.0134E+02
ELE.NO. 6 FOR LOAD CASE 2
6 0.0000E+00 1.8864E+02 0.0000E+00 -4.7087E+02 0.0000E+00 3.2915E+02
8 0.0000E+00 2.1067E+02 0.0000E+00 -1.3340E+02 0.0000E+00 9.9804E+01
12 0.0000E+00 -3.0000E+02 0.0000E+00 1.4735E-12 0.0000E+00 -2.1284E-12
11 0.0000E+00 -9.9310E+01 0.0000E+00 -1.9435E+02 0.0000E+00 -2.5029E+02
ELE.NO. 6 FOR LOAD CASE 3
6 -2.9880E+05 6.6191E+02 -3.0717E+05 6.3684E+03 2.7909E+03 -5.5444E+03
8 3.0633E+05 -9.9012E+02 -3.2773E+05 4.3051E+03 -3.7448E+03 4.3520E+03
12 3.2019E+05 1.9338E-11 3.2019E+05 -6.0036E+03 -3.5365E-11 6.0036E+03
11 -3.2773E+05 3.2821E+02 3.1470E+05 -4.0134E+03 9.5385E+02 -2.8310E+03
ELE.NO. 6 FOR LOAD CASE 101
6 0.0000E+00 6.4188E+02 0.0000E+00 -1.6022E+03 0.0000E+00 1.1200E+03
8 0.0000E+00 7.1682E+02 0.0000E+00 -4.5390E+02 0.0000E+00 3.3959E+02
12 0.0000E+00 -1.0208E+03 0.0000E+00 -3.8582E-04 0.0000E+00 -5.1630E-04
/
11 0.0000E+00 -3.3792E+02 0.0000E+00 -6.6131E+02 0.0000E+00 -8.5163E+02
ELE.NO. 6 FOR LOAD CASE 102
6 -2.9880E+05 1.1151E+03 -3.0717E+05 5.2371E+03 2.7909E+03 -4.7536E+03
8 3.0633E+05 -4.8397E+02 -3.2773E+05 3.9846E+03 -3.7448E+03 4.5918E+03
12 3.2019E+05 -7.2078E+02 3.2019E+05 -6.0036E+03 -1.3051E-03 6.0036E+03
11 -3.2773E+05 8.9605E+01 3.1470E+05 -4.4804E+03 9.5385E+02 -3.4324E+03
40. FINISH
SLAB SUPPORTED ALONG 2 EDGES -- PAGE NO. 8
*********** END OF THE STAAD.Pro RUN ***********
**** DATE= JAN 6,2020 TIME= 11:34:49 ****
************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://www.bentley.com/en/support/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
* *
* Copyright (c) 1997-2017 Bentley Systems, Inc. *
* http://www.bentley.com *
************************************************************