MASON INDUSTRIES, Inc.

C
JOB NAME
Manufacturers of Vibration Control Products
350 Rabro Drive 2101 W. Crescent Ave., Suite D CUSTOMER
Hauppauge, NY 11788 Anaheim, CA 92801 CUSTOMER P.O. 1” Deflection
631/348-0282 714/535-2727
FAX 631/348-0279 FAX 714/535-5738 MASON M.I.
A, B, C, D & E
[email protected] [email protected] Series Mounts
www.Mason-Ind.com DWG. NO.

Illustration shows single spring C-A, C-B or C-C mount.

C-D & C-E mounts have 2 & 4 springs each respectively.
TOP ACCESS ADJUSTMENT BOLT - Turn clockwise to load
spring and maintain Free & Operating Height. Bolt length
is suitable for 1" maximum Equipment Base thickness. TYPE C RATINGS
Rated Rated Spring Spring
Capacity Defl. Constant Color/
A Size (lbs) (in) (lbs/in) Stripe
LOCKNUT Mounting may be C-A-45 45 1.60 28 Blue
operated 1/2" above C-A-75 75 1.50 50 Orange
Free & Operating Height.
EQUIPMENT BASE C-A-125 125 1.33 94 Brown
FERROUS HOUSING
C-A-200 200 1.15 174 Black
C-A-310 310 1.00 310 Yellow
C-A-400 400 1.00 400 Green
C-A-510 510 1.00 510 Red
W C-A-625 625 1.00 625 White
H
Free & C-B-65 65 2.10 31 Brown
Operating C-B-85 85 2.10 40 White/Black
Height C-B-115 115 2.00 57 Silver
C-B-150 150 2.00 75 Orange
NON-SKID NEOPRENE C-B-280 280 1.60 174 Green
ACOUSTICAL ISOLATION PAD C-B-450 450 1.31 344 Red
(Bolting to floor is not necessary for
L
C-B-750 750 1.12 670 White
indoor applications) T C-B-1000 1000 1.00 1000 Blue
All springs have additional C-B-1250 1250 1.00 1250 Gray
SBC
travel to solid equal to 50% C-B-1650 1650 1.00 1650 Black
HCL
of the rated deflection.
MAX BOLT C-C-1000 1000 1.00 1000 Black
DIA. - MBD
C-C-1350 1350 1.00 1350 Yellow
C-C-1750 1750 1.00 1750 Black*
Slot Width - SW HCW C-C-2100 2100 1.00 2100 Yellow*
C-C-2385 2385 1.00 2385 Yellow**
C-C-2650 2650 1.00 2650 Red*
C-C-2935 2935 1.00 2935 Red**
BASE PLATE DIMENSIONS
C-D-3500 3500 1.00 3500 Black*
C-D-4200 4200 1.00 4200 Yellow*
TYPE C DIMENSIONS (inches) (Casting Dimensions may vary ± 1/ 8") C-D-4770 4770 1.00 4770 Yellow**
Free & C-D-5300 5300 1.00 5300 Red*
Adjustm. Oper. C-D-5870 5870 1.00 5870 Red**
Size A L T W SW HCL HCW MBD SBC Bolt Height C-E-7000 7000 1.00 7000 Black*
C-A 4 5 3/4 1/2 2 1/ 8 5/16 4 3/ 4 1 1 /4 5 3/8 × 4 4 1/2 C-E-8400 8400 1.00 8400 Yellow*
C-B 5 3/4 8 1/ 4 1/2 2 3/ 4 7/16 6 1/ 2 1 1/ 2 3/8 7 1/ 4 1/2 × 4 5 5/8 C-E-9540 9540 1.00 9540 Yellow**
3/8 7 7/ 8 5/8 × 4 1 /2 5 5/8 C-E-10600 10600 1.00 10600 Red*
C-C 6 5/8 8 7/ 8 9/16 3 1/ 2 7/16 7 1/ 4 1 3/ 4
5/8 × 4 1 /2 6 1/8 C-E-11740 11740 1.00 11740 Red**
C-D 9 3/4 12 9/16 3 1/ 2 7/16 10 3/8 1 3/ 4 3/8 11
C-E 12 1/8 12 3/4 5/8 6 5/ 8 - 11 3/8 5 1/ 8 1/2 - 3/4 × 5 6 1/8 *with RED core Spring **w ith GREEN core Spring

CERTIFICATION DATA SPECIFIED DEFLECTION

TAG :
1 : 6 :
UNIT :
2 : 7 :
PLAN VIEW OF MOUNT LOCATION:
3 : 8 :
4 : 9 :
Click with mouse for each location >
5 : 10 :
Sets Required:

DWN: CHKD: DATE: DWG. No.

FORM S-202 09/2008
 MASON INDUSTRIES, Inc.
C
JOB NAME
Manufacturers of Vibration Control Products
350 Rabro Drive 2101 W. Crescent Ave., Suite D CUSTOMER
Hauppauge, NY 11788 Anaheim, CA 92801 CUSTOMER P.O.
631/348-0282 714/535-2727 25mm Deflection
FAX 631/348-0279 FAX 714/535-5738 MASON M.I. A, B, C, D & E
[email protected] [email protected] Series Mounts
www.Mason-Ind.com DWG. NO.

Illustration shows single spring C-A, C-B or C-C mount.

C-D & C-E mounts have 2 & 4 springs each respectively.
TOP ACCESS ADJUSTMENT BOLT - Turn clockwise to load
spring and maintain Free & Operating Height. Bolt length
is suitable for 25 mm maximum Equipment Base thickness. TYPE C RATINGS
Rated Rated Spring Spring
Capacity Defl. Constant Color/
A Size (Kg) (mm) (Kg/mm) Stripe
LOCKNUT Mounting may be C-A-45 20 41 0.49 Blue
operated 13 mm above C-A-75 34 38 0.89 Orange
Free & Operating Height.
EQUIPMENT BASE C-A-125 57 34 1.68 Brown
FERROUS HOUSING
C-A-200 91 29 3.14 Black
C-A-310 141 25 5.64 Yellow
C-A-400 182 25 7.28 Green
C-A-510 231 25 9.24 Red
W C-A-625 284 25 11.36 White
H
Free & C-B-65 29 53 0.55 Brown
Operating C-B-85 37 53 0.70 White/Black
Height C-B-115 52 51 1.02 Silver
C-B-150 68 51 1.33 Orange
NON-SKID NEOPRENE C-B-280 127 51 3.10 Green
ACOUSTICAL ISOLATION PAD C-B-450 204 41 6.18 Red
L
(Bolting to floor is not necessary for
C-B-750 341 33 12.18 White
indoor applications) T
C-B-1000 454 25 18.16 Blue
All springs have additional C-B-1250 568 25 22.72 Gray
SBC travel to solid equal to 50% C-B-1650 750 25 30.00 Black
HCL
of the rated deflection.
MAX BOLT C-C-1000 454 25 18.16 Black
DIA. - MBD
C-C-1350 614 25 24.56 Yellow
C-C-1750 795 25 31.80 Black*
Slot Width - SW HCW C-C-2100 954 25 84.00 Yellow*
C-C-2385 1084 25 95.40 Yellow**
C-C-2650 1204 25 48.16 Red*
C-C-2935 1334 25 53.36 Red**
BASE PLATE DIMENSIONS
C-D-3500 1591 25 63.64 Black*
TYPE C DIMENSIONS (mm) (Casting Dimensions may vary ±3mm) C-D-4200 1909 25 76.36 Yellow*
C-D-4770 2168 25 86.72 Yellow**
Adjustment Free & C-D-5300 2409 25 96.36 Red*
Bolt Oper. C-D-5870 2668 25 106.72 Red**
Size A L T W SW HCL HCW MBD SBC (in) Height C-E-7000 3182 25 127.28 Black*
C-A 102 146 13 54 8 121 25 6 127 3/8x4 114 C-E-8400 3818 25 152.72 Yellow*
C-B 146 209 13 70 11 165 38 9 184 1/2x4 143 C-E-9540 4336 25 173.44 Yellow**
168 225 C-E-10600 4818 25 192.72 Red*
C-C 14 89 11 184 44 9 200 5/8x4 1/2 143
C-E-11740 5336 25 213.44 Red**
C-D 248 305 14 89 11 263 44 9 279 5/8x4 1/2 155
C-E 308 324 16 168 - 289 130 13 - 3/4x5 155 *with RED core Spring **with GREEN core Spring

CERTIFICATION DATA SPECIFIED DEFLECTION

TAG :
1 : 6 :
UNIT :
2 : 7 :
PLAN VIEW OF MOUNT LOCATION:
3 : 8 :
4 : 9 :
Click with mouse for each location >
5 : 10 :
Sets Required:

DWN: CHKD: DATE: DWG. No.

FORM S-202metric 09/2008
 MASON INDUSTRIES, Inc.
Manufacturers of Vibration Control Products
350 Rabro Drive
Hauppauge, NY 11788
2101 W. Crescent Ave., Suite D
Anaheim, CA 92801
JOB NAME
CUSTOMER C
2” Deflection
CUSTOMER P.O.
631/348-0282 714/535-2727 B, B2, C2, D-C2 &
FAX 631/348-0279 FAX 714/535-5738 MASON M.I. E-C2 Series
[email protected] [email protected]
DWG. NO. Mounts
www.Mason-Ind.com
Illustration shows single spring C-B, C-B2 or C-C2
C-D-C2 or C-E-C2 mounts have 2 & 4 springs respectively. TYPE C RATINGS Rated at 50%
additional travel
TOP ACCESS ADJUSTMENT BOLT - Turn clockwise to load
spring and maintain Free & Operating Height. Bolt length Rated Rated Spring Spring to solid
is suitable for 1" maximum Equipment Base thickness. Capacity Defl. Constant Color/ Capicity Defl.
Size (lbs) (in) (lbs/in) Stripe (lbs) (lbs)
A C-B-20 20 2.40 8 Tan 20 2.40
LOCKNUT Mounting may be C-B-26 26 2.18 12 White/Black 26 2.18
operated 1/2" above C-B-35 35 2.20 16 Purple 35 2.20
EQUIPMENT BASE Free & Operating Height. C-B-50 50 2.20 24 White/Red 50 2.20
C-B-65 65 2.10 31 Brown 65 2.10
FERROUS HOUSING C-B-85 85 2.10 40 White/Black 85 2.10
C-B-115 115 2.00 57 Silver 115 2.00
C-B-150 150 2.00 75 Orange 150 2.00
W C-B2-210 210 2.12 99 Silver 210 2.12
H
Free &
C-B2-290 290 2.00 144 Blue 290 2.00
Operating C-B2-450 450 2.00 324 Tan 410 1.83
Height C-B2-680 680 2.00 340 Gray 565 1.66
C-C2-125 125 2.50 50 Purple 125 2.50
C-C2-170 170 2.40 70 Brown 170 2.40
L C-C2-210 210 2.30 90 Red 210 2.30
T C-C2-260 260 2.20 120 White 260 2.20
NON-SKID NEOPRENE C-C2-330 330 2.00 165 Black 330 2.00
ACOUSTICAL ISOLATION PAD All springs have additional C-C2-460 460 2.00 230 Blue 460 2.00
(Bolting to floor is not necessary for travel to solid equal to 50%
of the rated deflection.
C-C2-610 610 2.00 305 Green 610 2.00
indoor applications)
C-C2-880 880 2.00 440 Gray 800 1.82
C-C2-1210 1210 2.00 605 Silver 1010 1.67
SBC C-C2-1540 1540 2.00 770 Gray* 1285 1.67
HCL
MAX BOLT C-C2-1870 1870 2.00 935 Silver* 1560 1.67
DIA. - MBD C-D-C2-2420 2420 2.00 1210 Silver 2020 1.67
C-D-C2-3080 3080 2.00 1540 Gray* 2570 1.67
Slot Width - SW HCW C-D-C2-3740 3740 2.00 1870 Silver* 3120 1.67
C-E-C2-3520 3520 2.00 1260 Gray 3200 1.82
C-E-C2-4840 4840 2.00 2420 Silver 4040 1.67
BASE PLATE DIMENSIONS C-E-C2-6160 6160 2.00 3080 Gray* 5145 1.67
C-E-C2-7480 7480 2.00 3740 Silver* 6245 1.67
*with RED core Spring
C-B2-450, B2-680, C2-880 thru C2-1870, D-C2 & E-C2 mounts
have minimum 25% of rated deflection additional travel to solid.
The last two columns below show ratings at 50% additional travel.
TYPE C DIMENSIONS (inches) (Casting Dimensions may vary ± 1/8")
Adjustment Free Min.
Size A L T W SW HCL HCW MBD SBC Bolt Height Height
C-B & B2 5 3/4 8 1/4 1/2 2 3/4 7/16 6 1/2 1 1/2 3/8 7 1/4 1/2 × 4 5 3/4 5 1/4
C-C2 6 5/8 8 7/8 9/16 3 1/2 7/16 7 1/4 1 3/4 3/8 7 7/8 5/8 × 4 1/2 6 1/2 5 1/2
C-D-C2 9 3/4 12 9/16 3 1/2 7/16 10 3/8 1 3/4 3/8 11 5/8 × 4 1/2 6 7/8 6
C-E-C2 12 1/8 12 3/4 5/8 6 5/8 - 11 3/8 5 1/8 1/2 - 3/4 × 5 6 7/8 6

CERTIFICATION DATA SPECIFIED DEFLECTION

TAG :
1 : 6 :
UNIT :
2 : 7 :
PLAN VIEW OF MOUNT LOCATION:
3 : 8 :
Click with mouse for each location > 4 : 9 :
5 : 10 :
Sets Required:

DWN: CHKD: DATE: DWG. No.

FORM S-221 09/2008
 MASON INDUSTRIES, Inc.
C
JOB NAME
Manufacturers of Vibration Control Products
350 Rabro Drive 2101 W. Crescent Ave., Suite D CUSTOMER
Hauppauge, NY 11788 Anaheim, CA 92801 50mm Deflection
631/348-0282 714/535-2727 CUSTOMER P.O.
B, B2, C2, D, E,
FAX 631/348-0279 FAX 714/535-5738 MASON M.I.
[email protected] [email protected] F & G-C2 Series
www.Mason-Ind.com DWG. NO. Mounts

Illustration shows single spring C-B, C-B2 or C-C2 TYPE C RATINGS Rated at 50%
D,E,F & G-C2 mounts have 2,4,6 & 9 springs respectively. additional travel
Rated Rated Spring Spring to solid
TOP ACCESS ADJUSTMENT BOLT - Turn clockwise to load
spring and maintain Free & Operating Height. Bolt length Capacity Defl. Constant Color/ Capacity Defl.
is suitable for 25mm maximum Equipment Base thickness.
Size (Kg) (mm) (Kg/mm) Stripe (Kg) (mm)
C-B-20 9 60.96 0.15 Tan 9 60.96
A C-B-26 12 55.37 0.22 White/Black 12 55.37
LOCKNUT Mounting may be
C-B-35 16 55.88 0.29 Purple 16 55.88
operated 13 mm above C-B-50 23 55.88 0.41 White/Red 23 55.88
Free & Operating Height. C-B-65 29 53.34 0.54 Brown 29 53.34
EQUIPMENT BASE
C-B-85 38 53.34 0.71 White/Black 38 53.34
FERROUS HOUSING C-B-115 52 50.80 1.02 Silver 52 50.80
C-B-150 68 50.80 1.34 Orange 68 50.80
C-B2-210 95 53.85 1.76 Silver 95 53.85
W C-B2-290 131 50.80 2.58 Blue 131 50.80
H C-B2-450 204 50.80 4.01 Tan 186 46.48
Free & C-B2-680 308 50.80 6.06 Gray 256 42.16
Operating C-C2-125 57 63.50 0.90 Purple 57 63.50
Height C-C2-170 77 60.96 1.26 Brown 77 60.96
C-C2-210 95 58.42 1.63 Red 95 58.42
C-C2-260 118 55.88 2.11 White 118 55.88
L C-C2-330 150 50.80 2.95 Black 150 50.80
T C-C2-460 209 50.80 4.11 Blue 209 50.80
NON-SKID NEOPRENE C-C2-610 277 50.80 5.45 Green 277 50.80
ACOUSTICAL ISOLATION PAD All springs have additional C-C2-880 399 50.80 7.85 Gray 363 46.23
(Bolting to floor is not necessary for travel to solid equal to 50% C- C2-1210 549 50.80 10.81 Silver 458 42.42
indoor applications) of the rated deflection.
C-C2-1540 698 50.80 13.74 Gray* 583 42.42
C-C2-1870 848 50.80 16.69 Silver* 708 42.42
SBC C-D-C2-2420 1098 50.80 21.61 Silver 916 42.42
HCL C-D-C2-3080 1397 50.80 27.50 Gray* 1166 42.42
MAX BOLT
DIA. - MBD C-D-C2-3740 1696 50.80 33.38 Silver* 1415 42.42
C-E-C2-3520 1597 50.80 31.44 Gray 1451 46.23
Slot Width - SW HCW
C-E-C2-4840 2195 50.80 43.21 Silver 1832 42.42
C-E-C2-6160 2794 50.80 55.00 Gray* 2334 42.42
C-E-C2-7480 3392 50.80 66.77 Silver* 2833 42.42
C-F-C2-7260 3293 50.80. 64.82 Silver 2749 42.42
BASE PLATE DIMENSIONS C-F-C2-9240 4191 50.80 82.50 Gray* 3499 42.42
C-F-C2-11220 5089 50.80 100.18 Silver* 4250 42.42
C-B2-450, B2-680, C2-880 thru C2-1870, D,E,F &G-C2 mounts
have minimum 25% of rated deflection additional travel to solid. C-G-C2-10890 4940 50.80 97.24 Silver 4125 42.42
The last two columns below show ratings at 50% additional travel. C-G-C2-13860 6287 50.80 123.76 Gray* 5250 42.42
C-G-C2-16830 7634 50.80 150.27 Silver* 6375 42.42
TYPE C DIMENSIONS (mm) (Casting Dimensions may vary ± 3mm) *with RED core Spring
Adjustment Free Min.
Size A L T W SW HCL HCW MBD SBC Bolt Height Height
C-B & B2 146 209 13 70 11 165 38 9 184 1/2x4 146 133
C-C2 168 225 14 89 11 184 44 9 200 5/8x4 1/2 165 140
C-D-C2 248 305 14 89 11 263 44 9 279 5/8x4 1/2 175 152
C-E-C2 308 324 16 168 - 289 130 13 - 3/4x5 175 152
C-F- C2 406 406 19 165 - 368 127 13 - 1x6 165 152
C-G-C2 502 502 19 254 - 467 209 13 - 1x6 171 159

CERTIFICATION DATA SPECIFIED DEFLECTION

TAG :
1 : 6 :
UNIT :
2 : 7 :
PLAN VIEW OF MOUNT LOCATION:
3 : 8 :
Click with mouse for each location > 4 : 9 :
5 : 10 :
Sets Required:

DWN: CHKD: DATE: DWG. No.

FORM S-221metric 09/2008