4 Power Quality Monitoring

CHAPTER 4
POWER QUALITY MONITORING
1
1 MONITORING CONSIDERATIONS
The monitoring objectives often determine the choice of monitoring equipment,
triggering thresholds, methods for data acquisition and storage, and analysis
and interpretation requirements.
Several common objectives of power quality monitoring are summarized here.

Monitoring to characterize system performance:
 This is the most general requirement.
 A power producer may find this objective important if it has the need to understand its
system performance and then match that system performance with the needs of
customers.
 System characterization is a practical approach to power quality monitoring.
 By understanding the normal power quality performance of a system, a provider can
quickly identify problems and can offer information to its customers to help them
match their sensitive equipment’s characteristics with realistic power quality
characteristics.
Monitoring to characterize specific problems:

 Many power quality service departments or plant managers solve problems by
performing short-term monitoring at specific customer sites or at difficult loads.
 This is a reactive mode of power quality monitoring, but it frequently identifies the
cause of equipment incompatibility, which is the first step to a solution.
2
Monitoring as part of an enhanced power quality service:
 Many power producers are currently considering additional services to offer
customers.
 One of these services would be to offer differentiated levels of power quality to
match the needs of specific customers.
 A provider and customer can together achieve this goal by modifying the power
system or by installing equipment within the customer’s premises.
Monitoring as part of predictive or just-in-time maintenance:

 Power quality data gathered over time can be analyzed to provide information
relating to specific equipment performance.
 Equipment maintenance can be quickly ordered to avoid failure, thus
preventing major power quality disturbances which ultimately will impact
overall power quality performance.
 The monitoring program must be designed based on the appropriate objectives,

and it must make the information available in a convenient form and in a
timely manner (i.e., immediately).
 The most comprehensive monitoring approach will be a permanently installed
monitoring system with automatic collection of information about steady-state
power quality conditions and energy use as well as disturbances. 3
1.1 Monitoring as part of a facility site survey
 Site surveys are performed to evaluate concerns for power quality and equipment
performance throughout a facility.
 The survey will include inspection of wiring and grounding concerns, equipment
connections, and the voltage and current characteristics throughout the facility.
 Power quality monitoring, along with infrared scans and visual inspections, is an
important part of the overall survey.
 The initial site survey should be designed to obtain as much information as possible
about the customer facility.
 This information is especially important when the monitoring objective is intended to
address specific power quality problems.
This information is summarized here.

1. Nature of the problems (data loss, nuisance trips, component failures, control system
malfunctions, etc.)
2. Characteristics of the sensitive equipment experiencing problems
(equipment design information or at least application guide information)
3. The times at which problems occur
4. Coincident problems or known operations (e.g., capacitor switching) that occur at the
same time
5. Possible sources of power quality variations within the facility (motor starting,
capacitor switching, power electronic equipment operation, arcing equipment, etc.) 4
6. Existing power conditioning equipment being used
7. Electrical system data (one-line diagrams, transformer sizes and impedances, load
information, capacitor information, cable data, etc.)
Figure .1 Form for recording supply transformer test data.
5
Figure .2 Form for recording feeder circuit test data (from panel)
6
Figure .3 Form for recording branch circuit test data (from panel)
7
Figure .4 Form for recording test data at individual loads.
8
1.2 Choosing monitoring locations
 However, such monitoring may be too expensive and there are challenges in
data management, analysis, and interpretation.
 Data collected at the service entrance can also characterize the customer load
current variations and harmonic distortion levels.
 Monitoring at customer service entrance locations has the additional
advantage of reduced transducer costs.
9
1.3 Options for permanent power quality monitoring equipment
10
Figure : Illustration of system power quality monitoring concept with
monitoring at the substation and selected customer locations.
1.Digital fault recorders (DFRs):
 These may already be in place at many substations.
 DFR manufacturers do not design the devices specifically for power quality
monitoring.
 However, a DFR will typically trigger on fault events and record the voltage
and current waveforms that characterize the event.
 This makes them valuable for characterizing rms disturbances, such as
voltage sags, during power system faults.
2.Smart relays and other IEDs:

 Many types of substation equipment may have the capability to be an
intelligent electronic device (IED) with monitoring capability.
 Manufacturers of devices like relays and reclosers that monitor the current
anyway are adding on the capability to record disturbances and make the
information available to an overall monitoring system controller.
3.Voltage recorders.:
 Power providers use a variety of voltage recorders to monitor steady-state
voltage variations on distribution systems.
 Typically, the voltage recorder provides a trend that gives the maximum,
minimum, and average voltage within specified sampling window
11
2. Power Quality Measurement Equipment
 They include everything from very fast transient overvoltages (microsecond
time frame) to long-duration outages (hours or days time frame).
 Power quality problems also include steady-state phenomena, such as
harmonic distortion, and intermittent phenomena, such as voltage flicker.
 Solving any diagnostic problem requires the right tools and the ability to use
them.
 Power quality engineers and technicians need meters and other measurement
tools to solve electrical problems.
 The first step in solving a power quality problem is to determine the cause of
the problem.
 Making either visual inspections or electrical measurements of the electrical
distribution system can do this.
 Using Quality Surveys to make visual inspections of a facility’s electrical

distribution system.
 Power Quality Measurement Tools to perform and analyze power quality

measurements using power quality measurement tools.
12
Figure: Measurement tools.
 They include instruments that measure and display the basic electrical
parameters of voltage, current, frequency, and impedance of an electrical
distribution system.
 These tools include ammeters, voltmeters, multimeters, oscilloscopes, flicker
meters, electrostatic voltmeters, infrared detectors, radio-frequency
interference and electromagnetic interference meters, harmonic and spectrum
analyzers, power quality monitors, and various types of wiring and grounding
testers.
 These instruments measure, display, and store electrical parameters for the
purpose of helping solve power quality problems.
 In addition to these electrical measurement tools, there are devices, such as
video cameras and audiotape recorders, for recording the effects of power
13
quality problems.
 With all these choices, power quality experts as well as beginners must know
how to choose and use the right instrument.
 how to choose the right measurement tool is a three-step process.
(i) First requires knowing the various types of power quality problems
discussed They include voltage swells, voltage sags, various types of
interruptions, overvoltage, undervoltage, harmonics, and transients.
(ii) Secondly, it requires knowing the various types of instruments to measure
those disturbances. The three primary types of instruments are multimeters,
oscilloscopes, and analyzers especially designed to measure and record power
quality disturbances.
(iii) Thirdly, it requires knowing how to match the instrument to the power
quality problem, as shown in Table .
TABLE Matching Measurement Tools to Type of Disturbance
14
2.1 Types of instruments
Basic categories of instruments that may be applicable include
1. Wiring and grounding test devices
2. Multimeters
3. Oscilloscopes
4. Disturbance analyzers
5. Harmonic analyzers and spectrum analyzers
6. Combination disturbance and harmonic analyzers
7. Flicker meters
8. Energy monitors
Regardless of the type of instrumentation needed for a particular test, there are a number
of important factors that should be considered
when selecting the instrument. Some of the more important factors include
 Number of channels (voltage and/or current)
 Temperature specifications of the instrument
 Ruggedness of the instrument
 Input voltage range (e.g., 0 to 600 V)
 Power requirements
 Ability to measure three-phase voltages
 Input isolation (isolation between input channels and from each input to ground)
 Ability to measure currents
 Housing of the instrument (portable, rack-mount, etc.)
 Ease of use (user interface, graphics capability, etc.)
 Documentation 15
 Communication capability (modem, network interface)
 Analysis software
Wiring and grounding testers
 Many power quality problems reported by end users are caused by problems
with wiring and/or grounding within the facility.
 These problems can be identified by visual inspection of wiring, connections,
and panel boxes and also with special test devices for detecting wiring and
grounding problems.
Important capabilities for a wiring and grounding test device include

■ Detection of isolated ground shorts and neutral-ground bonds
■ Ground impedance and neutral impedance measurement or indication
■ Detection of open grounds, open neutrals, or open hot wires
■ Detection of hot/neutral reversals or neutral/ground reversals
 Three-phase wiring testers should also test for phase rotation and phase-to-
phase voltages.
 These test devices can be quite simple and provide an excellent initial test for
circuit integrity.
 Many problems can be detected without the requirement for detailed
monitoring using expensive instrumentation.
16
Multimeters
 After initial tests of wiring integrity, it may also be necessary to make quick
checks of the voltage and/or current levels within a facility.
 Overloading of circuits, undervoltage and overvoltage problems, and unbalances
between circuits can be detected in this manner.
 These measurements just require a simple multimeter.
 Signals used to check for these include
■ Phase-to-ground voltages
■ Phase-to-neutral voltages
■ Neutral-to-ground voltages
■ Phase-to-phase voltages (three-phase system)
■ Phase currents
■ Neutral currents
17
Oscilloscopes
Disturbance analyzers
 They typically can measure a wide variety of system disturbances from very
short duration transient voltages to long-duration outages or undervoltages.
 Thresholds can be set and the instruments left unattended to record
disturbances over a period of time. The information is most commonly recorded
on a paper tape, but many devices have attachments so that it can be recorded
on disk as well.
There are basically two categories of these devices:
1.Conventional analyzers that summarize events with specific information such as

overvoltage and undervoltage magnitudes, sags and surge magnitude and
duration, transient magnitude and duration,
etc. 18
2.Graphics-based analyzers that save and print the actual waveform along with
the descriptive information which would be generated by one of the conventional
Smart power quality monitors
 All power quality measurement instruments previously described are designed
to collect power quality data.
 Some instruments can send the data over a telecommunication line to a central
processing location for analysis and interpretation.
 However, one common feature among these instruments is that they do not
possess the capability to locally analyze, interpret, and determine what is
happening in the power system.
 They simply record and transmit data for post-processing.
Transducer requirements
Monitoring of power quality on power systems often requires transducers to obtain
acceptable voltage and current signal levels.
Voltage transducers.
Current transducers. turns ratio, e.g., 2000:5
19
20
21

4 Power Quality Monitoring

Uploaded by

Copyright:

Available Formats

4 Power Quality Monitoring

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

4 Power Quality Monitoring

Uploaded by

Copyright:

Available Formats

CHAPTER 4

POWER QUALITY MONITORING

Several common objectives of power quality monitoring are summarized here.

Monitoring to characterize specific problems:

Monitoring as part of predictive or just-in-time maintenance:

 The monitoring program must be designed based on the appropriate objectives,

This information is summarized here.

2.Smart relays and other IEDs:

 Using Quality Surveys to make visual inspections of a facility’s electrical

 Power Quality Measurement Tools to perform and analyze power quality

TABLE Matching Measurement Tools to Type of Disturbance

Important capabilities for a wiring and grounding test device include

1.Conventional analyzers that summarize events with specific information such as

You might also like