Scribd
Upload
95 views

Structural Analysis Tutorial 8

This document contains 10 questions regarding the structural analysis of continuous beams and frames using the slope-deflection method. It provides figures of structures and asks students to determine support reactions, bending moment diagrams, shear force diagrams, end moments, and joint rotations. The questions cover applying the slope-deflection method to analyze statically indeterminate beams and frames with various support conditions.

Uploaded by

Suman.S
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
95 views

Structural Analysis Tutorial 8

This document contains 10 questions regarding the structural analysis of continuous beams and frames using the slope-deflection method. It provides figures of structures and asks students to determine support reactions, bending moment diagrams, shear force diagrams, end moments, and joint rotations. The questions cover applying the slope-deflection method to analyze statically indeterminate beams and frames with various support conditions.

Uploaded by

Suman.S
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Tutorial-8

Structural Analysis (CE21004)


Department of Civil Engineering,
Indian Institute of Technology Kharagpur
Due Date: 27/03/2018

March 18, 2018

Question 1: Determine the support reactions for the continuous beam


shown in figure 1. Assume EI is constant. Take A as a fixed support, B as
a roller and C a pin.

Figure 1: Structure for Question 1.

Question 2: Determine the bending moment diagram and shear force


diagram for the continuous beam shown in figure 2. Use slope-deflection
method.

Figure 2: Structure for Question 2.

Question 3: Determine the BMD for the frame shown in figure 3. Assume
support A as fixed and C as pinned. Use slope deflection method.

1
Figure 3: Structure for Question 3.

Question 4: Draw BMD for the girder BCE using slope deflection method
for the structure shown in figure 4. Assume all joints except C are pinned.
Joint C is fixed. Take EI to be constant for all members. Use slope-
deflection.

Figure 4: Structure for Question 4.

Question 5: What are the advantages of slope-deflection method over force


method.
Question 6: Calculate the end moments and joint rotations for the con-
tinuous beam shown bellow. The beam has constant EI for both the span.
Use slope deflection method.

2
Figure 5: Structure for Question 6.

Question 7: Draw the bending moment and shear force diagram for the
following beam using slope deflection method. E = 200 GP a and I =
200 × 106 mm4 . Support B settles 10 mm.

Figure 6: Structure for Question 7.

Question 8: Draw the bending moment diagram for the following frame
using slope deflection method. EI is constant for all members.

Figure 7: Structure for Question 8.

Question 9: Draw the bending moment and shear force diagram for the
following frame using slope deflection method. E = 200 GP a and I =
800 × 106 mm4 . Assume members are prismatic and inextensible. A and D

3
are fixed support. B is rigid joint and C is pinned joint.

Figure 8: Structure for Question 9.

Question 10: Calculate the end moments of the frame shown bellow. Take
constant EI. Use slope deflection method.

Figure 9: Structure for Question 10.

You might also like