Scribd
Upload
21 views

Tutorial Part4

This document contains 10 questions regarding the structural analysis of different beams and frames. Each question provides a figure of the structure being analyzed and asks the reader to determine values like displacement, slope, deflection at specific points using analytical methods like the moment-area method. The questions cover analyzing fixed-fixed, simply supported and continuous beams and single bay frames subjected to uniform loads.

Uploaded by

Suman.S
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
21 views

Tutorial Part4

This document contains 10 questions regarding the structural analysis of different beams and frames. Each question provides a figure of the structure being analyzed and asks the reader to determine values like displacement, slope, deflection at specific points using analytical methods like the moment-area method. The questions cover analyzing fixed-fixed, simply supported and continuous beams and single bay frames subjected to uniform loads.

Uploaded by

Suman.S
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Tutorial-4

Structural Analysis (CE21004)


Department of Civil Engineering,
Indian Institute of Technology Kharagpur
Due Date: 11/02/2020

February 4, 2020

Question 1: Consider the structure A − B − C, where, A is the fixed end


at the bottom, B is the beam-column connection and C is the free end. The
beam BC is subjected to a UDL of magnitude w kN/m. Determine the
vertical displacement and slope at point C.

Figure 1: Structure for Question 1.

Question 2: Determine the slope at support A. Support at A is pinned


while that at B is roller. Assume EI is constant.

1
Figure 2: Structure for Question 2.

Question 3: Find the slope at B and deflection at C.

Figure 3: Structure for Question 3.

Question 4: Consider a single-storey single-bay frame shown in figure 4.


Support on the left (A) is hinged while that on the right (D) is a roller.
Each column and beam have a length L. EI remains constant throughout.
A uniformly distributed load of w kN/m acts on the beam BC. Determine
the slope at C.

2
Figure 4: Structure for Question 4.

Question 5: Find the value of a such that the slope at A is zero. EI


remains constant.

Figure 5: Structure for Question 5.

Question 6: Find the slope and deflection at B.

3
Figure 6: Structure for Question 6.

Question 7: Use the moment-area method to find the deflection at the


middle of the simply supported beam.

4
Figure 7: Structure for Question 7.

Question 8: Use the moment-area method to find the deflection and slope
at point B and C.

Figure 8: Structure for Question 8.

Question 9: Use the moment-area method to find the maximum deflection


at the middle of the beam. Assume that EI is constant, and neglect the
weight of the beam.

5
Figure 9: Structure for Question 9.

Question 10: Find the deflection at the middle of the beam and slope at
the support of the beam. Assume that EI is constant.

Figure 10: Structure for Question 10.

You might also like