Scribd
Upload
175 views1 page

SpectraPLUS-SC Features and Specifications

The SpectraPLUS-SC is a signal analysis software that can sample signals up to 200 kHz with 8, 16, or 24 bit precision across 1 or 2 channels. It offers real-time and post-processing analysis functions including filtering, FFT sizes up to 1,048,576 points, averaging, cross-channel processing, and calibration in various physical units. The software also includes signal generation capabilities and tools for acoustic, vibration, and distortion measurements.

Uploaded by

MounicaRasagyaPalla
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
175 views1 page

SpectraPLUS-SC Features and Specifications

The SpectraPLUS-SC is a signal analysis software that can sample signals up to 200 kHz with 8, 16, or 24 bit precision across 1 or 2 channels. It offers real-time and post-processing analysis functions including filtering, FFT sizes up to 1,048,576 points, averaging, cross-channel processing, and calibration in various physical units. The software also includes signal generation capabilities and tools for acoustic, vibration, and distortion measurements.

Uploaded by

MounicaRasagyaPalla
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

SpectraPLUS-SC Features and Specifications

Maximum Sampling Rate: 200 kHz (hardware dependent)


Frequency Span: 0 to 1/2 of selected sampling rate
Decimation (down sampling): Up to 50:1 ratio
Sampling Precision: 8, 16 or 24 bit (hardware dependent)
Maximum Channels: 2
Modes: Real-Time, Recording, Post-Process
Post-Process Editing: Cut, Copy, Paste, Play, Play Special, Mute, Gain Adjust, DC Offset, Filter
Digital Filtering Options: Low Pass, High Pass, Bandpass, Notch or User defined filter shape
Maximum Recording Time: Automatic rollover when Wave file size limit reached (2GB); limited only by available hard disk space
Displays: Time Series, Spectrum, Phase, 3-D Surface Plot, Spectrogram
Time Series Display options: Left, Right, Both, Difference, Left vs Right (X/Y) or Right vs Left (Y/X)
Data Views: Popup window of underlying data values.
Run Control – automatically stop after user selectable FFT count or time limit.
Spectral Overlays: Up to 6 simultaneous overlay traces, unlimited save and retrieve from hard disk
Composite overlay: average of any selected overlays or the difference between any two overlays.
Display Zoom: Arbitrary Zoom In to any portion of overall frequency or time span
Auto Scaling – all plots
Cursor Measurements: Absolute, Differential (Ctrl key) and Harmonic cursors (Shift key)
Right Click Action Menus: Various Cross display functions, Inverse FFT, Expand and Edit functions
FFT Sizes, 32, through 1,048,576 pts (in powers of two increments)
Overlap Processing: Up to 99% of FFT size in Post Processing mode
Smoothing Windows: Bartlett, Blackman, Flat Top, Hamming, Hanning, Kaiser, Parzen, Triangular, Uniform
Averaging Modes: 1) Free Run with selectable block size. 2) Sound Level Meter mode (Off/Fast/Medium/Slow/Forever)
Averaging Types: Exponential, Linear or Vector moving average
Peak Hold: live peak hold with selectable timeout
Dual Channel Processing: Average, Cross Spectrum, Real and Complex Transfer Functions, Coherence
Cross Channel Delay: One channel can be delayed with respect to the other
Delay Finder: Determines the time delay between two channels using cross correlation techniques. Delay units can be Milliseconds,
Feet, or Meters
Overload Detection: Flag and/or exclude data when maximum input level is exceeded
Amplitude Axis Scaling: Linear, Logarithmic or Log Magnitude plus Power Spectral Density (PSD) option
Frequency Axis Scaling: Narrowband Linear, Narrowband Logarithmic, 1/1, 1/3, 1/6, 1/9, 1/12, 1/24, 1/48 or 1/96 Octave
Spectral Weighting: Flat, A, B, C ANSI weighting curves
Microphone Compensation: Independent compensation for each channel
Markers: Up to 6 user defined markers with user customizable labels
Triggering: Selectable threshold, channel and delay. Edge or Level detection
Amplitude Calibration: V, mV, dBV, dBmV, dBu, SPL or PA (in air or water), psi, acceleration or custom units
Vibration Measurements: Acceleration (G), Velocity (ft/sec, in/sec, mils/sec, mm/sec), Displacement (ft, in, mils, mm)
Independent Calibration and Scaling: each channel can be scaled and calibrated independently
Signal Generator: Pink Noise, White Noise, Tone Burst, Noise Burst, 1 kHz Tone, Multiple Tones, Frequency Sweep, Frequency Step,
Level Sweep, IMD test tones, Pulse, Sawtooth, Triangular, Squarewave, User Defined (from .WAV source). DTMF, Digital Zero
Utility Measurements: Peak Frequency, Peak Amplitude, Total Power
Distortion Measurements: THD, THD+N, SNR, IMD
THD+N versus Frequency utility - quickly and conveniently measure the distortion characteristics of a device over a range of
frequencies. Results are shown on a Log Magnitude plot and can be saved/loaded from disk or printed.
Acoustic Tools: Reverberation Time (RT-60), Delay Finder, Stereo Phase Scope, Equivalent Noise Level (Leq, LeqT, Lsel, Lpk, Lmax,
Lmin, L10, L50, L90
Automation Tools: Dynamic Data Exchange (DDE), COM API, Macro Scripting Language, Data Logging
Import/Export: .WAV, ASCII, and Binary file formats
File Merge: Join two mono files into a single stereo file
Configuration Files: Store and recall common analyzer test setups from disk. Quick load from toolbar
Color Printing: All displays plus annotation, comments, and margin control
Clipboard support: WAV segments, tabular data and bitmap images

Pioneer Hill Software LLC, 24460 Mason Rd NW, Poulsbo WA 98730 USA www.spectraplus.com

You might also like