TEST CERTIFICATE- IN SITU DENSITY BY SAND REPLACEMENT METHOD

Report No. LDCIV-2002072/120/1 Date Reported 19 August 2020

Customer Ref. - Date Received 18 August 2020

1. Information Provided By Customer
Customer for LAL Petrojet

Project Duqm Integrated Power & Water Plant

Project Customer Duqm Power Company

Main Contractor Al ghanim

Sample Description Backfilling Material

Source of Material Site

Layer Thickness (mm) 150

Location Duqm
2. Information Provided By Laboratory
ASTM D1556/D1556M-15
Test Method Weather Condition Sunny
ASTM D 2216-10 Method - A

Method Variation Nil MDD/OMC Reference LDCIV-1902032

Remarks Nil Date Sample Tested Tuesday, August 18, 2020

3. Test Results
Bulk density of sand (ρ) Mg/m3 1.49 Initial weight of Sand g 8000

Test Location Reference * 1 2 3

Actual Depth of Test Hole mm 150 150 150
Volume of Test Hole cm3 2637 2814 2808
Moisture Content of Sampled Material % 6 5 5
Wet Density of Sampled Material g/cm3 2.28 2.24 2.25
Dry Density of Sampled Material g/cm3 2.16 2.13 2.14

In-place dry unit weight kN/m3 21.2 20.9 21.0

Maximum dry density Mg/m3 2.253 2.236 2.236

Optimum Moisture Content % 6.2 5.3 5.3

Relative compaction % 96 95 96

*Test Location : Test No. 01 to : Transformer GTG (Unit-11) Under Grade Slab / R.C Paving

Page 1 of 1 For and on behalf of Lonestar Alpha Laboratories

Duqm
 Spreadsheet for In-Situ Density Test (Sand-Cone Method)
ASTM D 1556-00
Report No. LDCIV-2002072/120/1 Date Reported 8/19/2020
Customer Ref. - Date Received 8/18/2020
Date Tested 8/18/2020

Bulk density of sand g/cm3 (ρ) 1.49 Initial Mass of sand befor pouring (m1) g. 8000

Test No. (Location Ref. No) 1 2 3

Sand cone Ref. 110 CF 110 CF 110 CF

Actual Depth of Test Hole mm 150 150 150

Mass of wet soil from hole (mw) g. 6025 6305 6310

Mass of sand after pouring (m2) g 2346 2167 2176
Mass of sand used to fill & funnel and base plate (m3) g 1725 1640 1640
Mass of sand in hole (mb=m1-(m2+m3) g. 3929 4193 4184 8000 8000 8000
Volume of test hole (v=mb/pa)cm3 2637 2814 2808 5369 5369 5369
In-place wet density of soil (pm=mw/v) g/cm3 2.28 2.24 2.25 0.00 0.00 0.00

Moisture content (ASTM D 2216- ) Method -A

Container No . DL-20 DL-10 DL-33
Mass of Container (W1) g. 101.2 139.1 82.4
Mass of container + wet soil (w2) g 575.3 590.2 595.3
Mass of container + dry soil (w3) g 549.5 568.3 570.3
Mass of moisture,g 25.8 21.9 25.0 0.0 0.0 0.0
Mass of dry soil (Md= w3- w1) 448.3 429.2 487.9 0.0 0.0 0.0
Moisture content of sampled material 6 5 5 #DIV/0! #DIV/0! #DIV/0!
In-place Dry Density of soil (pd=100pm/(100+w)g/cm3 2.16 2.13 2.14 #DIV/0! #DIV/0! #DIV/0!
In-place dry unit weight = (pdx9.807) kN/m3 21.2 20.9 21.0 #DIV/0! #DIV/0! #DIV/0!
Maximum dry density Mg/m3 2.253 2.236 2.236
Optimum Moisture Content % 6.2 5.3 5.3

Relative compaction (Pd/Pmax)x 100 % 96 95 96 #DIV/0! #DIV/0! #DIV/0!

 TEST CERTIFICATE- IN SITU DENSITY BY SAND REPLACEMENT METHOD
Report No. LDCIV-2002072/120/2 Date Reported 19 August 2020

Customer Ref. - Date Received 18 August 2020

1. Information Provided By Customer
Customer for LAL Petrojet

Project Duqm Integrated Power & Water Plant

Project Customer Duqm Power Company

Main Contractor Al ghanim

Sample Description Backfilling Material

Source of Material Site

Layer Thickness (mm) 150

Location Duqm
2. Information Provided By Laboratory
ASTM D1556/D1556M-15
Test Method Weather Condition Sunny
ASTM D 2216-10 Method - A

Method Variation Nil MDD/OMC Reference LDCIV-1902032

Remarks Nil Date Sample Tested Tuesday, August 18, 2020

3. Test Results
Bulk density of sand (ρ) Mg/m3 1.49 Initial weight of Sand g 8000

Test Location Reference * 1 2 3

Actual Depth of Test Hole mm 150 150 150
Volume of Test Hole cm3 2588 2570 2648
Moisture Content of Sampled Material % 5 6 6
Wet Density of Sampled Material g/cm3 2.25 2.30 2.25
Dry Density of Sampled Material g/cm3 2.14 2.17 2.12

In-place dry unit weight kN/m3 21.0 21.3 20.8

Maximum dry density Mg/m3 2.253 2.253 2.236

Optimum Moisture Content % 6.2 6.2 5.3

Relative compaction % 95 96 95

*Test Location : Test No. 01 to 02: Fire Fighting Building Grade Slab East Side.

Page 1 of 1 For and on behalf of Lonestar Alpha Laboratories

Duqm
 Spreadsheet for In-Situ Density Test (Sand-Cone Method)
ASTM D 1556-00
Report No. LDCIV-2002072/120/2 Date Reported 8/19/2020
Customer Ref. - Date Received 8/18/2020
Date Tested 8/18/2020

Bulk density of sand g/cm3 (ρ) 1.49 Initial Mass of sand befor pouring (m1) g. 8000

Test No. (Location Ref. No) 1 2 3

Sand cone Ref. 110 CF 110 CF 110 CF

Actual Depth of Test Hole mm 150 150 150

Mass of wet soil from hole (mw) g. 5823 5913 5959

Mass of sand after pouring (m2) g 2419 2446 2419
Mass of sand used to fill & funnel and base plate (m3) g 1725 1725 1635
Mass of sand in hole (mb=m1-(m2+m3) g. 3856 3829 3946 8000 8000 8000
Volume of test hole (v=mb/pa)cm3 2588 2570 2648 5369 5369 5369
In-place wet density of soil (pm=mw/v) g/cm3 2.25 2.30 2.25 0.00 0.00 0.00

Moisture content (ASTM D 2216- ) Method -A

Container No . DL-1 DL-15 DL-20
Mass of Container (W1) g. 123.0 125.3 131.1
Mass of container + wet soil (w2) g 595.1 585.8 588.2
Mass of container + dry soil (w3) g 572.6 560.4 562.4
Mass of moisture,g 22.5 25.4 25.8 0.0 0.0 0.0
Mass of dry soil (Md= w3- w1) 449.6 435.1 431.3 0.0 0.0 0.0
Moisture content of sampled material 5 6 6 #DIV/0! #DIV/0! #DIV/0!
In-place Dry Density of soil (pd=100pm/(100+w)g/cm3 2.14 2.17 2.12 #DIV/0! #DIV/0! #DIV/0!
In-place dry unit weight = (pdx9.807) kN/m3 21.0 21.3 20.8 #DIV/0! #DIV/0! #DIV/0!
Maximum dry density Mg/m3 2.253 2.253 2.236
Optimum Moisture Content % 6.2 6.2 5.3

Relative compaction (Pd/Pmax)x 100 % 95 96 95 #DIV/0! #DIV/0! #DIV/0!

 TEST CERTIFICATE- IN SITU DENSITY BY SAND REPLACEMENT METHOD
Report No. LDCIV-2002072/120/3 Date Reported 19 August 2020

Customer Ref. - Date Received 18 August 2020

1. Information Provided By Customer
Customer for LAL Petrojet

Project Duqm Integrated Power & Water Plant

Project Customer Duqm Power Company

Main Contractor Al ghanim

Sample Description Backfilling Material

Source of Material Site

Layer Thickness (mm) 150

Location Duqm
2. Information Provided By Laboratory
ASTM D1556/D1556M-15
Test Method Weather Condition Sunny
ASTM D 2216-10 Method - A

Method Variation Nil MDD/OMC Reference LDCIV-1902032

Remarks Nil Date Sample Tested Tuesday, August 18, 2020

3. Test Results
Bulk density of sand (ρ) Mg/m3 1.49 Initial weight of Sand g 8000

Test Location Reference * 1 2 3

Actual Depth of Test Hole mm 150 150 150
Volume of Test Hole cm3 2599 2607 2646
Moisture Content of Sampled Material % 6 5 4
Wet Density of Sampled Material g/cm3 2.27 2.27 2.24
Dry Density of Sampled Material g/cm3 2.14 2.16 2.15

In-place dry unit weight kN/m3 21.0 21.2 21.0

Maximum dry density Mg/m3 2.253 2.253 2.236

Optimum Moisture Content % 6.2 6.2 5.3

Relative compaction % 95 96 96

*Test Location : Test No. 01 to 02 : Electrical Duck Bank 14D053 & 15D053 Under P.C.C

Page 1 of 1 For and on behalf of Lonestar Alpha Laboratories

Duqm
 Spreadsheet for In-Situ Density Test (Sand-Cone Method)
ASTM D 1556-00
Report No. LDCIV-2002072/120/3 Date Reported 8/19/2020
Customer Ref. - Date Received 8/18/2020
Date Tested 8/18/2020

Bulk density of sand g/cm3 (ρ) 1.49 Initial Mass of sand befor pouring (m1) g. 8000

Test No. (Location Ref. No) 1 2 3

Sand cone Ref. 110 CF 110 CF 110 CF

Actual Depth of Test Hole mm 150 150 150

Mass of wet soil from hole (mw) g. 5910 5925 5925

Mass of sand after pouring (m2) g 2402 2391 2423
Mass of sand used to fill & funnel and base plate (m3) g 1725 1725 1635
Mass of sand in hole (mb=m1-(m2+m3) g. 3873 3884 3942 8000 8000 8000
Volume of test hole (v=mb/pa)cm3 2599 2607 2646 5369 5369 5369
In-place wet density of soil (pm=mw/v) g/cm3 2.27 2.27 2.24 0.00 0.00 0.00

Moisture content (ASTM D 2216- ) Method -A

Container No . DL-25 DL-39 DL-12
Mass of Container (W1) g. 108.0 138.6 125.1
Mass of container + wet soil (w2) g 560.5 551.2 549.2
Mass of container + dry soil (w3) g 534.3 531.3 531.3
Mass of moisture,g 26.2 19.9 17.9 0.0 0.0 0.0
Mass of dry soil (Md= w3- w1) 426.3 392.7 406.2 0.0 0.0 0.0
Moisture content of sampled material 6 5 4 #DIV/0! #DIV/0! #DIV/0!
In-place Dry Density of soil (pd=100pm/(100+w)g/cm3 2.14 2.16 2.15 #DIV/0! #DIV/0! #DIV/0!
In-place dry unit weight = (pdx9.807) kN/m3 21.0 21.2 21.0 #DIV/0! #DIV/0! #DIV/0!
Maximum dry density Mg/m3 2.253 2.253 2.236
Optimum Moisture Content % 6.2 6.2 5.3

Relative compaction (Pd/Pmax)x 100 % 95 96 96 #DIV/0! #DIV/0! #DIV/0!

 TEST CERTIFICATE- IN SITU DENSITY BY SAND REPLACEMENT METHOD
Report No. LDCIV-2002072/120/4 Date Reported 19 August 2020

Customer Ref. - Date Received 18 August 2020

1. Information Provided By Customer
Customer for LAL Petrojet

Project Duqm Integrated Power & Water Plant

Project Customer Duqm Power Company

Main Contractor Al ghanim

Sample Description Backfilling Material

Source of Material Site

Layer Thickness (mm) 150

Location Duqm
2. Information Provided By Laboratory
ASTM D1556/D1556M-15
Test Method Weather Condition Sunny
ASTM D 2216-10 Method - A

Method Variation Nil MDD/OMC Reference LDCIV-1902032

Remarks Nil Date Sample Tested Tuesday, August 18, 2020

3. Test Results
Bulk density of sand (ρ) Mg/m3 1.49 Initial weight of Sand g 8000

Test Location Reference * 1 2 3 4 5 6

Actual Depth of Test Hole mm 150 150 150 150 150 150
Volume of Test Hole cm3 2570 2551 2585 2542 2535 2550
Moisture Content of Sampled Material % 5 5 6 4 6 5
Wet Density of Sampled Material g/cm3 2.25 2.27 2.25 2.29 2.27 2.27
Dry Density of Sampled Material g/cm3 2.15 2.17 2.13 2.19 2.14 2.17

In-place dry unit weight kN/m3 21.1 21.3 20.9 21.5 21.0 21.2

Maximum dry density Mg/m3 2.253 2.253 2.253 2.253 2.253 2.253

Optimum Moisture Content % 6.2 6.2 6.2 6.2 6.2 6.2

Relative compaction % 95 96 95 97 95 96

*Test Location : Test No. 01 : Electrical Manhole B (61-A) Under P.C.C

Page 1 of 1 For and on behalf of Lonestar Alpha Laboratories

Duqm
 Spreadsheet for In-Situ Density Test (Sand-Cone Method)
ASTM D 1556-00
Report No. LDCIV-2002072/120/4 Date Reported 8/19/2020
Customer Ref. - Date Received 8/18/2020
Date Tested 8/18/2020

Bulk density of sand g/cm3 (ρ) 1.49 Initial Mass of sand befor pouring (m1) g. 8000

Test No. (Location Ref. No) 1 2 3 4 5 6

Sand cone Ref. 110 CF 110 CF 110 CF 111 CF 112 CF 113 CF

Actual Depth of Test Hole mm 150 150 150 150 150 150

Mass of wet soil from hole (mw) g. 5785 5797 5825 5811 5762 5787
Mass of sand after pouring (m2) g 2445 2474 2423 2487 2498 2475
Mass of sand used to fill & funnel and base plate (m3) g 1725 1725 1725 1725 1725 1725
Mass of sand in hole (mb=m1-(m2+m3) g. 3830 3801 3852 3788 3777 3800
Volume of test hole (v=mb/pa)cm3 2570 2551 2585 2542 2535 2550
In-place wet density of soil (pm=mw/v) g/cm3 2.25 2.27 2.25 2.29 2.27 2.27

Moisture content (ASTM D 2216- ) Method -A

Container No . DL-13 DL-24 DL-25 DL-26 DL-27 DL-28
Mass of Container (W1) g. 103.2 83.7 83.7 83.7 83.7 83.7
Mass of container + wet soil (w2) g 560.5 602.8 607.8 599.8 609.8 602.8
Mass of container + dry soil (w3) g 540.3 579.2 579.2 579.2 579.2 579.2
Mass of moisture,g 20.2 23.6 28.6 20.6 30.6 23.6
Mass of dry soil (Md= w3- w1) 437.1 495.5 495.5 495.5 495.5 495.5
Moisture content of sampled material 5 5 6 4 6 5
In-place Dry Density of soil (pd=100pm/(100+w)g/cm3 2.15 2.17 2.13 2.19 2.14 2.17
In-place dry unit weight = (pdx9.807) kN/m3 21.1 21.3 20.9 21.5 21.0 21.2
Maximum dry density Mg/m3 2.253 2.253 2.253 2.253 2.253 2.253
Optimum Moisture Content % 6.2 6.2 6.2 6.2 6.2 6.2

Relative compaction (Pd/Pmax)x 100 % 95 96 95 97 95 96

 TEST CERTIFICATE- IN SITU DENSITY BY SAND REPLACEMENT METHOD
Report No. LDCIV-2002072/120/5 Date Reported 19 August 2020

Customer Ref. - Date Received 18 August 2020

1. Information Provided By Customer
Customer for LAL Petrojet

Project Duqm Integrated Power & Water Plant

Project Customer Duqm Power Company

Main Contractor Al ghanim

Sample Description Backfilling Material

Source of Material Site

Layer Thickness (mm) 150

Location Duqm
2. Information Provided By Laboratory
ASTM D1556/D1556M-15
Test Method Weather Condition Sunny
ASTM D 2216-10 Method - A

Method Variation Nil MDD/OMC Reference LDCIV-1902032

Remarks Nil Date Sample Tested Tuesday, August 18, 2020

3. Test Results
Bulk density of sand (ρ) Mg/m3 1.49 Initial weight of Sand g 8000

Test Location Reference * 1 2 3 4 5 6

Actual Depth of Test Hole mm 150 150 150 150 150 150
Volume of Test Hole cm3 2561 2565 2561 2535 2535 2544
Moisture Content of Sampled Material % 5 5 5 4 6 6
Wet Density of Sampled Material g/cm3 2.29 2.24 2.27 2.29 2.29 2.28
Dry Density of Sampled Material g/cm3 2.19 2.14 2.16 2.19 2.15 2.14

In-place dry unit weight kN/m3 21.4 21.0 21.2 21.5 21.1 21.0

Maximum dry density Mg/m3 2.253 2.253 2.253 2.253 2.253 2.253

Optimum Moisture Content % 6.2 6.2 6.2 6.2 6.2 6.2

Relative compaction % 97 95 96 97 96 95

*Test Location : Test No. 01 to 03 : Pipe Sleepers Under P.C.C

Page 1 of 1 For and on behalf of Lonestar Alpha Laboratories

Duqm
 Spreadsheet for In-Situ Density Test (Sand-Cone Method)
ASTM D 1556-00
Report No. LDCIV-2002072/120/5 Date Reported 8/19/2020
Customer Ref. - Date Received 8/18/2020
Date Tested 8/18/2020

Bulk density of sand g/cm3 (ρ) 1.49 Initial Mass of sand befor pouring (m1) g. 8000

Test No. (Location Ref. No) 1 2 3 4 5 6

Sand cone Ref. 110CF 110 CF 110 CF 111 CD 112 CD 113 CD

Actual Depth of Test Hole mm 150 150 150 150 150 150

Mass of wet soil from hole (mw) g. 5856 5745 5825 5798 5798 5798
Mass of sand after pouring (m2) g 2459 2453 2459 2498 2498 2485
Mass of sand used to fill & funnel and base p 1725 1725 1725 1725 1725 1725
Mass of sand in hole (mb=m1-(m2+m3) g. 3816 3822 3816 3777 3777 3790
Volume of test hole (v=mb/pa)cm3 2561 2565 2561 2535 2535 2544
In-place wet density of soil (pm=mw/v) g/cm3 2.29 2.24 2.27 2.29 2.29 2.28

Moisture content (ASTM D 2216- ) Method -A

Container No . DL-10 DL-23 DL-12 DL-13 DL-14 DL-15
Mass of Container (W1) g. 122.0 89.6 125.1 125.1 125.1 125.1
Mass of container + wet soil (w2) g 595.0 582.2 550.2 549.2 589.2 578.2
Mass of container + dry soil (w3) g 574.2 560.4 529.3 531.3 562.3 551.3
Mass of moisture,g 20.8 21.8 20.9 17.9 26.9 26.9
Mass of dry soil (Md= w3- w1) 452.2 470.8 404.2 406.2 437.2 426.2
Moisture content of sampled material 5 5 5 4 6 6
In-place Dry Density of soil
(pd=100pm/(100+w)g/cm3 2.19 2.14 2.16 2.19 2.15 2.14
In-place dry unit weight = (pdx9.807) kN/m3 21.4 21.0 21.2 21.5 21.1 21.0
Maximum dry density Mg/m3 2.253 2.253 2.253 2.253 2.253 2.253
Optimum Moisture Content % 6.2 6.2 6.2 6.2 6.2 6.2

Relative compaction (Pd/Pmax)x 100 % 97 95 96 97 96 95