FORScan forum • View topic - How to program PATS using FORScan v2.2.

* 1/6

FORScan forum
Software scanner for Ford, Mazda, Lincoln, Mercury vehicles

Skip to content

Search… Search
Advanced search

• Board index ‹ English & International forums ‹ Diagnostics and Maintenance using
FORScan
• Change font size
• Print view

• FAQ
• Register
• Login

How to program PATS using FORScan v2.2.*

Post a reply
Search this topic… Search
1 post • Page 1 of 1

How to program PATS using FORScan v2.2.*

by FORScan » Wed Jan 07, 2015 11:33 am

Update 2015-07-20:
- added note for Australian and American vehicles
- added llink to the article about How to check blank PATS keys

This article describes PATS programming procedure. The article is actual for version 2.2.1 (PATS
programming is implemented for European Ford models of 1999-2002 model year). If PATS
programming functions is not available in the list of service functions, it means it is not
implemented for this model. If the PATS programming function is available in the Service
chapter, it is implemented for this model and must work in full.

There are 2 types of secure access: coded and timed. Coded requires an incode generation by the
outcode provided by vehicle. Timed access requires that operator has wait for some period of time
(usually 10-12 minutes) with diagnostic tester connected. Some vehicles support only coded
access, some only timed access, some support both. FORScan supports all of these options. If both
access types are available, FORScan asks user to select the preferred one. Coded access can be
done fast, but requires incode/outcode calculator. Timed access doesn't require any code
exchange, but requires signfificant timeframe (at least 10 mins). Module Initialization option

http://forscan.org/forum/viewtopic.php?f=6&t=839 2015/8/13
FORScan forum • View topic - How to program PATS using FORScan v2.2.* 2/6

(available for some models) may require special Dual coded access. Detailed information about
Module Initialization function is available in this article: viewtopic.php?f=6&t=1500

So, what do you need in order to program PATS using FORScan:

1. Extended license (viewtopic.php?f=5&t=836)

2. At least one valid ignition key (master key) that is known by PATS, except the case when all
keys are erased from the PATS memory
3. For vehicles with coded access, access to outcode/incode key generator (we use free site
http://autokeyprog.com for this purpose, account has to be registered there)

Let's review a use case for the following scenario: a vehicle supports coded access. PATS knows 2
master keys, but the owner has only 1 of them. The owner wants to erase the lost key from the
PATS memory and program new one (for this purpose a blank key is purchased). There is no way
to delete a single key, only all known keys can be erased. So the user has to perform the operation
in 2 steps: remove all keys known by PATS and program the old key and the new key. Here we
go:

- Run the procedure. We see that PATS knows 2 keys:

PATS1_en.png (97.31 KiB) Viewed 5184 times

- Select the Ignition Keys Erase option. FORScan will read outcode from the vehicle and suggest
you enter the incode:

http://forscan.org/forum/viewtopic.php?f=6&t=839 2015/8/13
FORScan forum • View topic - How to program PATS using FORScan v2.2.* 3/6

PATS2_en.png (74.11 KiB) Viewed 5184 times

- login to the autokeyprog.com and go to Service->PATS login calculator, enter the outcode and
generate the incode:

PATS3_en.png (26.33 KiB) Viewed 5184 times

http://forscan.org/forum/viewtopic.php?f=6&t=839 2015/8/13
FORScan forum • View topic - How to program PATS using FORScan v2.2.* 4/6

- enter the incode in the FORScan field and click ok. If everything OK, FORScan will request
confirmation on the Erase operation. If confirmed, the operation is executed and user is returned
back to the main menu. User should see now zero keys known by PATS.

It is important to do not Exit from the menu, otherwise the security access will be lost, and user
will have to obtain the coded/timed access again.

- Now, user should program 2 keys. For this purpose the Ignition Key Programming option must
be used. User will be suggested to program the key:

PATS4_en.png (84.07 KiB) Viewed 5184 times

- User should follow the instruction displayed by FORScan, so turn the ignition key to OFF, then
back to ON and click OK. FORScan will confirm the operation and ask to turn on/off again.

http://forscan.org/forum/viewtopic.php?f=6&t=839 2015/8/13
FORScan forum • View topic - How to program PATS using FORScan v2.2.* 5/6

PATS5_en.png (78.96 KiB) Viewed 5184 times

It is important to leave the programmed key in the ignition lock, because number of known keys is
non-zero and FORScan will look for a master key.

- program the second key in the same way, except that when FORScan asks to insert new key, the
first key has to be removed and the second key has to be inserted.

- When returned back to the main menu, user should see 2 known keys again. But this time these 2
keys are in hands.

Note: some models for Australian and American markets have no stand-alone Ignition Key
programming function. The function is available in the PATS menu but PATS doesn't support it.
So on these models it is not possible to add a key to th PATS memory. The only way is to use
Erase and Program keys function (added in FORScan v2.2.5). This function erases all keys and
switches PATS to a special learning mode. In this mode user can program 2 keys one by one.

We also recommend to read this article to study Module Initialization procedure and use cases:
viewtopic.php?f=6&t=1500

WARNING:
Experience shows that 90% of problems with using this function are caused by blank key
problems (not-original/china clone or from another model). Consdering this experiene, it must be
counted that the Erase function is potentially dangerous, because engine will not start until you

http://forscan.org/forum/viewtopic.php?f=6&t=839 2015/8/13
FORScan forum • View topic - How to program PATS using FORScan v2.2.* 6/6

program at least 2 keys. So it is STRONGLY RECOMMENDED to check the blank keys (and
correct work of the program with your specific vehicle) before executing the Erase function. Just
programm it as the 3rd key and if it has been programmed successfully and engine runs using this
key, you may execute the Erase function.

Here is a dedicated article about how to check the blank PATS key:

viewtopic.php?f=6&t=1581

FORScan
Site Admin

Posts: 1206
Joined: Fri Jun 13, 2014 2:21 am

Top

Post a reply
1 post • Page 1 of 1

Return to Diagnostics and Maintenance using FORScan

Jump to: Diagnostics and Maintenance using FORScan  Go

Who is online

Users browsing this forum: Bing [Bot] and 4 guests

• Board index
• The team • Delete all board cookies • All times are UTC

Powered by phpBB® Forum Software © phpBB Group

http://forscan.org/forum/viewtopic.php?f=6&t=839 2015/8/13