Scribd
Upload
964 views2 pages

Tech Info - PH6

ph6

Uploaded by

Carlos Alberto Aguilera Mendez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
964 views2 pages

Tech Info - PH6

ph6

Uploaded by

Carlos Alberto Aguilera Mendez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 2
Weatherford Hydril PH-4/PH-6 Tubing Connection ‘The Hydril PH-4/PH-6 Tubing connections are specifically designed for éxtra heavy-walled and thick-walled tubing necessary to complete deepest high-pres- sure formations, Integral joint externally and internally upset. Two-step, non-tapered thread profie 4 threads per inch PH-4, and 6 threads per inch PH-6. Hydril PH-4 Tubing Connection Coupling Dimensions — —— . Nom: @ * w te [Pree weight per iey_| tommy | arty | cnt met | in| towed | to | tron | tnt | trom | cint_| trom | inch ‘2% | 7308 1100 | 2005 | S248 | 040s | 1028 | 2,000 | soo | 750 | esas | 4200 [1074 195 | 1905 | soe7 | olsao | a1,17 | ‘1945 | 49.40 | 870 | 9625 | 4200 | toree 16,70 | 2,480 | 2.99 | ost0 | 12,95 | 2406 | @1.11 | 4,500 | 114,90 | 4.240 | 107,60 80,90 | 17.05 | 2440 | 61.97 | 0,830 | 1348 | 2.975 | 6ois2 | 4'sea |11590 | 4.240 | 107.60 ‘4 | 101.60 19,00 [3,000 | 76.20 | 000 | 12,70 | 2.920 | 74,16 | 5.000 | 127,00 | 4,760 | 120.90 101,60 } 22.50 | 2,780 | 70,81 | o10 | 15.49 | 2700 | 68158 | s.1e8 | 191.77 | 4.760 | 120,90 114,30 [21,60 | 3,500 | 68,00 12,70 | 3.420 | 86,6 | 6.500 |199,70 | «,760 | 120.90 4% [11430 | 2400 | 3.380 | 95.85 1422 | 3,300 | 89,82 | 5.569 | 141,30 | 4,760 | 120.90 114,30 | 2650 | 3240 | 92,20 16,00 | 3,160 | 90,26 | 5,608 | 144,47 | 4760 | 120.90 November 1992] petrence:ryeneuminaesea 8. 63 3% Weatherford byt 1-4 tng Connocion Recommended Minimum Make-Up Torque ° Nom. 75 O75 108 Weight Le Leo N00 N00 to} eer) Ibs} Wen} Ifetbs) (Ne 2% 11.00 5000 e779 500 e512 z 1185 5000 6779 500 eai2 5 18,70 7500 10168 ‘9500 12880 47.05 000 10846 10000 13558 19.00 8500 T1826 10500 14256 2250 9500 12880 41500 15591 4 2480 9500 12880 +2000 16269 24100 10000 19658 +9000 17625 50 11500 15591 14500 19659 Important Note: Torque for these products should be 12 % % over minimum. Torque should never exceed 28 % over minimum. Coupling Dimensions D | Nom. é T 4, w woight| ied tommy ibs/ta] tind towed | tind_| toon) | ind flo} _| tow 60,33] 6,95] 1,067| 47.42] 0254] 6,45] 1.808 2906 | 73.81 2% | 60,33] 6,20] 1,883| 47,06 | 0261 | 6.88) 1.796 60:33| 7.70] 1,703] 43.25 0,336 | 6.53 11545 73.03] 7,90 | 2823 | 9,00 0,276 | 7,01 | 2.266 2% | 7303] 870| 2259] 57.37 | 0,308] 7.82] 2.200 | 73.03] 9150 | 21185 | 55:75] 0.040] 8,63] 2.130 73,03| 10,70| 2.091 | 53:11| 0,392 | 9195 | 2,030 8,90] 12,95 | 2750 | 69.65] 0,575] 9.52| 2.607 88,90| 15.20 | 2.548 | 64,71| 0,276| 12.00] 2.405 [701,60] 13.40] 3.310 | e403] 0590 0.38) 3.275 ay [11430] 3028 [97.16 0537 | 9.55] 3.765 114,39] 3,640 | 92,45 | 0,430 10.92] 3.560 2838 | 74,62| 2,784] 70,96] 3,050 | 77.47 3,125 | 79,37| 2,024 | 74'28] 3,050 | 77.47 ‘3490 | 87,92| 9,12 | 04,12] 3,040 | 77,28 3,500 | 88,90] 3,365 | 85,47) s,0¢0 3.625] 92,07] 3419 | 96,84) 3.090 3.686 | 93,67| 3,509| 0,12] 020 | 76,70 5 6 6 6 6 08,55] 4,169 | 106,40] 3,350 | 85,09] 6 6 6 6 6 114,30] 4/367 | 110,92| 3,340 | 84,80 Ti7.a7| 4.514 [114,68] 3,320 | 64,92 180,17] 5,021 | 127,58) 9.340 | 4,89 134,95 5,170 | 191,31] 8.340 | 94.69 November 1992] _Roteronco: Hycrit Catalogue 801, 1900 Recommended Minimum Make-Up Torque > Nom | O75 ers P-105, P05) Weight 80 re N20 N20 oy (ost) (rtibs] Im} {tbe} Ine 395 7200 2082, 2100 9660 2% 620 2200 2002 2700 3860 Ta 2200 2082 2700 3860 7.90 3000 4087 3800 745 Pa 370 3000 ‘087 3500 4745 5 950 4500 6101 +500 7456, 1070 4500 e101 5500 7456; 3% 1295 3500 7456 7000 2400 ‘ 15.80 500 7486 7000 9490 z 13.40 3500 7456; 7000) 3490 aa 1550 000 8194 7500 T0168 z 19.20 7500 10168 9500 +2860 Important Note: Torque for these products should be 12 4 % over minimum. Torque should never exceed 26 % over minimum. November 1992] _Reterence: Hyer Catalogue 901, 1990 1.6.3 64

You might also like