Scribd
Upload
167 views2 pages

General Information: Systems Operation

Uploaded by

Christian Montes
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
167 views2 pages

General Information: Systems Operation

Uploaded by

Christian Montes
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

988H Wheel Loader, Powered By C18 Engine(SEBP3906 - 34) - Document Structure Page 1 of 2

Shutdown SIS

Previous Screen

Product: WHEEL LOADER


Model: 988H WHEEL LOADER BXY
Configuration: 988H Wheel Loader BXY00001-UP (MACHINE) POWERED BY
C18 Engine

Systems Operation
988H Wheel Loader Electrohydraulic System
Media Number -RENR6217-05 Publication Date -01/02/2010 Date Updated -02/02/2010

i03842009

General Information
SMCS - 5050

Illustration 1 g02089874

988H Wheel Loader

(1) Hydraulic fan motor

(2) Implement pump and pump control valve

(3) Hydraulic fan pump and solenoid valve

(4) Pilot filter

(5) Electrohydraulic control

(6) Electronic control module

(7) Regeneration valve BXY2733-Up

(8) Lift linkage position sensor

(9) Tilt cylinder

(10) Fan

(11) Pilot/brake pump

(12) Hydraulic tank

(13) Pilot relief valve

(14) Accumulator charging valve

(15) Solenoid valve (hydraulic lockout)

https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw... 19/02/2010
988H Wheel Loader, Powered By C18 Engine(SEBP3906 - 34) - Document Structure Page 2 of 2

(16) Main control valve and pilot control actuators

(17) Lift cylinder

(18) Tilt linkage position sensor

(AA) Moving parts

(BB) Electronic system

(CC) Pilot hydraulic system

(DD) Main hydraulic system

(EE) Hydraulic tank

The 988H Wheel Loader is electrohydraulically controlled. The machine uses hydraulic power that is controlled by electronics to move the actuators. The
electrohydraulic system is composed of the following systems: the main hydraulic system, the pilot system, the implement electronic control system, and the
hydraulic fan system

The hydraulic tank is common to all of the systems.

The pilot system consists of the following components. pilot/brake pump, pilot relief valve, pilot filter, solenoid valve (hydraulic lockout), pilot control actuators and
accumulator charging valve. The pilot control actuators are attached to the main control valve. The actuators control the shifting of the stems. Also, the main control
valve is equipped with a shuttle valve (ball resolver) and a pressure reducing valve (lowering control). The shuttle valve and the pressure reducing valve are used in
order to supply pilot oil to the pilot control actuators for lowering the work tool with a dead engine.

The main hydraulic system consists of the following components. implement pump, pump control valve, main relief valve, main control valve, lift cylinders and tilt
cylinder. Additionally, a regeneration valve for the tilt cylinder is found on machines with serial numbers BXY2733-Up. The main control valve will be equipped
with both line relief valves and pilot control actuators. The pilot control actuators will be common to both the main hydraulic system and the pilot hydraulic system.
For additional information about the operation of the pilot control actuators, refer to the Systems Operation, "Pilot Control Actuators". For additional information
about the implement pump and the pump control valve, refer to the Systems Operation, "Piston pump (Implement)".

The implement electronic control system consists of the following components. electrohydraulic control, electronic control module,, switches, lift linkage position
sensor and tilt linkage position sensor. The electrohydraulic control consists of the following components. control levers, detent coils and position sensors.

The hydraulic fan system is standard on all 988H Wheel Loaders. The hydraulic fan system is an on demand fan control system. As the need for more cooling arises,
the fan system supplies more air flow through the radiator. The output of the hydraulic fan system is used to meet different cooling requirements during high ambient
conditions or a light work application. For additional information about the hydraulic fan system, refer to the Systems Operation, "Hydraulic Fan System".

If the machine is equipped with the optional ride control system, an accumulator and a diverter valve will be connected to the lift cylinders. For additional
information about the operation of the ride control system, refer to the Systems Operation, "Ride Control System".

Copyright 1993 - 2010 Caterpillar Inc. Fri Feb 19 18:14:32 EST 2010
All Rights Reserved.
Private Network For SIS Licensees.

https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw... 19/02/2010

You might also like