LY1DQ ham radio resources LY1DQ@mrtv.

lt

TRIODE GS-31B
The GS-31B triode fulfils generation and amplification functions in grounded-grid circuits in continuous-wave
operation in the decimetric and metric wavelength ranges.
OPERATING ENVIRONMENTAL CONDITIONS
105 max
Vibration loads:
frequency, Hz 5-2000
acceleration, m/s2 98

45-1
40,3-0,5
Multiple loads with acceleration, m/s2 343
Single impacts with acceleration, m/s2 1470
Linear loads with acceleration, m/s2 490
Ambient temperature, °C -60 to +70

15 +0,5
A

-1,5
Relative humidity at up to +40 °C, % 98 ∅ 100,2 -0,5

147-4
9,3±0,7
GENERAL

Cathode: indirectly heated, dispenser, oxide-coated. G

Envelope: metal-ceramic. KH
Cooling: forced air. H
Height, mm, at most:

14,2±0,5
with heat sink 147 ∅ 26,2 -0,8

6,7±0,5
without heat sink 134 ∅ 40,5 -0,5
Diameter, mm, at most: ∅ 60,3 -0,8
with heat sink 100,2 ∅65
without heat sink 65
Mass, kg, at most: A
CONNECTION
with heat sink 1,2
without heat sink 650 OF ELECTRODES
G WITH LEADS
BASIC DATA

Electrical Parameters A - anode;

Heater voltage, V 12,6 G - grid;
KH H KH - cathode and heater;
Heater current, A 3,1-3,7
Mutual conductance (at anode voltage 2 kV, H - heater
grid voltage 1 V and anode current 250 mA),
mA/V, at least 22
Operating point (negative grid voltage at anode Ig, Ia, A
voltage 2 kV and anode current 250 mA), V 6-12
Interelectrode capacitance, pF:
input 19-24 2,0 50V
output, at most 0,12 U g=
transfer 3,8-5,2 1,8
Warm up time, s, at most 120 40
Output power, W, min.: 1,6
at anode voltage 1,8 kV, anode current 1,4 30
500 mA, wavelength 60 cm 60
at anode voltage 1,7 kV, anode current 1,2 20
700 mA, wavelength 30 cm 180
1,0 10
Limit Operating Values 0
0,8
Heater voltage, V 12-13,2 0,6 -5
Anode voltage, kV: -10 50
DC 3 0,4 40
instantaneous value 6 30
0,2 20
Grid voltage (instantaneous value), V -400 to +120
10
Cathode current (r.m.s. value), A 1,4 0
Dissipation, W: 0,4 0,8 1,2 1,6 2,0 2,4 2,8 Ua, kV
3
anode 1,0x10
grid 22 Averaged Characteristic Curves:
Temperature at anode lead, °C 200 U1=12,6 V;
Temperature at cathode and grid leads, °C 120 __________ anode;
Temperature at external ceramic parts, °C 250 _ _ _ _ _ _ grid-anode
Wavelength, cm 28-100
Created by LY3NML
LY1DQ ham radio resources [email protected]

Ia, Ig, A
Averaged Characteristic P, W
1,8

,6k 2 2,2
Curves:
1,6 U1=12,6 V;
__________ anode;

V
1,4 _ _ _ _ _ _ anode-grid

=1
1,2

Ua
500 2,2
1,2 2,0

0,8

η =30%
kV
1,0 1,8 2 ,2
1,6 Ua=
0,8 2,0
Averaged Characteristic 400
25
0,6 0,8 Curves Showing Output 20
1,2 Powe and Efficiency 1,8
2 1,6 15
0,4 versus Anode Current: 300
2,2
U1=12,6 V, λ=30 cm; 1,6 10
0,2 __________ output power;
5
η)
_ _ _ _ _ _ efficiency (η
-30 -20 -10 0 10 20 30 40 50 0
Ug, V 500 700 900 Ia, mA

P, W Averaged Characteristic
Curves Showing Output
Powe and Efficiency
versus Anode Current:
1000 U1=12,6 V, λ=60 cm;
__________ output power;
900 Ua=2,2kV η = 50%
2,0 _ η)
_ _ _ _ _ efficiency (η
800 1,8
1,6
700 2,2 40
2,0
600 1,8
500 1,6 30

400
300 20
200
100 10
200 300 400 500 600 700 800 Ia, mA

Created by LY3NML