Product Catalogue: WWW - Ventusair.eu

Download as pdf or txt
Download as pdf or txt
You are on page 1of 29

2019

PRODUCT CATALOGUE

CUSTOM AIR TECHNOLOGIES


www.ventusair.eu

www.ventusair.eu
2 | General Information General Information | 3
CONTENTS

General Information . . . . . . . . . . . . . . . . . . . . . . . . 2
Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
Material General Information . . . . . . . . . . 4
Testing Procedure . . . . . . . . . . . . . . . . . . . 8

Canyon Flowbar Systems . . . . . . . . . . . . . . . . . . . 10


Fastening Methods . . . . . . . . . . . . . . . . . 12
CFS 25 / 50 mm . . . . . . . . . . . . . . . . . . . . 16
4-Way Slot Diffuser . . . . . . . . . . . . . . . . . . 18
Return Flowbar . . . . . . . . . . . . . . . . . . . . . 20
Accessories . . . . . . . . . . . . . . . . . . . . . . . . 21

Linear Bar Grilles . . . . . . . . . . . . . . . . . . . . . . . . . 22
Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Fastening Methods . . . . . . . . . . . . . . . . . 25
LBG 8-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
LBG 12-5 . . . . . . . . . . . . . . . . . . . . . . . . . . 28
LBG 10-7 V-Cut . . . . . . . . . . . . . . . . . . . . . 30
LBG Square . . . . . . . . . . . . . . . . . . . . . . . . 32

Look Like Canyon Grilles . . . . . . . . . . . . . . . . . . 34


Fastening Methods . . . . . . . . . . . . . . . . . 36
LLC 25 / 35 / 45 mm . . . . . . . . . . . . . . . . . 38

V-Slot Diffusers . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Fastening Methods . . . . . . . . . . . . . . . . . 42
V-Slot 25 / 35 / 45 mm . . . . . . . . . . . . . . . 44

Custom Grilles . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Plenum Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Fastening Methods . . . . . . . . . . . . . . . . . 53

Contact us . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

CUSTOM AIR TECHNOLOGIES VENTUSAIR.EU

4 | General Information General Information | 5


Ventus air technologies is the subsidiary company of D. Ellinas
Factory Products Ltd which has been established in 2009 and
it is based in Cyprus (Limassol). The company is well known
for the innovative way of approaching challenges within the
construction industry in different sectors especially in the grille
technologies sector.

The company specializes on the design and manufacture of


PVC grilles and defusers through a very well-equipped factory,
which responds to both limited and mass production. Due
to its modern facilities, the factory and the whole production
team is able to achieve the development and establishment of
various high-quality products and custom-made technological
structures.

Our main goal is providing products with competitive prices,


short delivery time and excellent services. Having established
ourselves in the conscience of architects, interior designers,
mechanical engineers, consultants and construction companies.
D. Ellinas Factory Products aspires to grow even more each
year in being another creative “tool” for the lovers of modern
design and innovative products.

In the framework of the collaboration between D. Ellinas


Factory Products Ltd and the Laboratory of fluid dynamics
of the University of Patra, ECOVAG, we would like to thank
Professor Mr. Margaris Dionysios-Eleftherios for the impeccable
supervision throughout the testing procedure of the study.
Secondly, we would like to thank all the scientific staff for their
effort and hard work that led the study to a successful outcome.

Aerodynamics Laboratory
University of Patra

6 | General Information General Information | 7


MATERIAL
FEATURES OF PVC PROCESSING
FOAM BOARD PERFORMANCE
Low thermal conductivity, Easily processed by
GENERAL INFORMATION good insulator drilling, sawing, nailing,
Chemicals and corrosion and planning
resistant Able to be processed in
Absorbs vibration and hotforming, hot-bending

PVC GRILLES oscillation and hot-folding


Weather resistant Glued and bonded with
Made from a high-tech material, Ventus pvc grilles and flowbar systems solve Ventus grilles are available
Waterproof other materials
a major concern faced primarily by engineers and property owners all over the in a variety of standard
Fire retardant The surface is very smooth
world and is no other than moisture formation on the grilles outer surface. With an sizes, fastening methods,
Cost-effective and suitable for printing
outstandingly low thermal conductivity rate, pvc foamboard (0.05 W/mK), resist on finishes and can also be
Strong and lightweight
that phenomenon extremely efficient, making Ventus grilles the perfect choice both customized to your needs
in appearance and performance. and project standards.

PVC MATERIAL PVC Foam Sheet is a chemically foamed, rigid and light weight
SPECIFICATIONS extruded sheet with a closed cell structure, that comes with a
PVC TO PLASTERBOARD JOINT PROCEDURE REQUIREMENTS:
(Polyvinyl chloride) smooth matt surface finish on both sides.
To prevent cracks and to provide the best finishing Double threaded screws
between pvc foam-board and plasterboard joint, a Uniflott Special Joint Filler by Knauf
TECHNICAL DATA special procedure described below should be followed. Special Textile Fiber Glass joint Tape (TFO) by Knauf
Fine grid sandpaper
PROPERTY TEST METHOD UNITS VALUE
3
Density DIN 53479 g/cm 0.55

Hardness DIN 53505 Shore ‘D’ ≥ 42

Water Absorption DIN 53495 % ≤ 1.0

Tensile strength* DIN 53455 MPa ≥ 15

Elongation at break** DIN 53455 % ≥ 15 STEP 1 STEP 2 STEP 3 STEP 4 STEP 5

Modulus of elasticity DIN 53457 MPa 900 - 1500 Use double threaded screws Slightly scrab the pvc surface Instantly after step 2 and Apply a thin and even layer Using a fine grid sandpaper
to fasten pvc grille in place to make it rougher using when compound is still wet, of the special joint filler scrab the surface till
Impact strength Izod ASTM D 256 KJ/ m² ≥ 9.0 and secure a tight fit along sandpaper. Fill the small gap place and stick a special compound on top of fiber becomes smooth. Then is
with the plasterboard. between pvc surface and textile fiber glass joint tape glass joint tape and let it dry. ready to be painted.
Impact strength Charpy DIN 53253 KJ/ m² ≥ 15 gypsumboard by applying on it and let it dry.
a thin and even layer of the
Flexural strength DIN 53452 MPa > 32 special joint filler compound.

Compressive Strength at 10% Deformation DIN 53421 MPa > 6.5 With a growing environmental consciousness in the
marketplace towards using “green” and sustainable
Surface resistivity ASTM D 257 Ω > 1 x 1014 The above procedure applies to the following situations where PVC and plasterboard joints. materials, we can actively source PVC leftovers
trough out production line and recycle them back to
Volume resistivity ASTM D 257 Ω-cm > 1 x 10 15 foam-board PVC panel for your eco-friendly project.

Dielectric Constant at 1 MHZ ASTM D 150 1.56

Dielectric strength DIN 53481 KV / cm ≥ 90

Vicat softening temperature DIN 53460 0


C ≥ 73
0
Heat Deflection temperature @ 1.8 MPa DIN 53461 C 58

Coefficient of Linear Expansion DIN 53752 mm / m 0C 0.08

Thermal conductivity DIN 52616 W/mK 0.05

Flammability BS 476 Part 7 Class 1 Y

* 15 MPa for free foam sheet with typical density 0.7 g/cc ** 15% for free foam sheet with typical density 0.7 g/cc
* 13 MPa for free foam sheet with typical density 0.55 g/cc ** 13% for free foam sheet with typical density 0.55 g/cc

8 | General Information General Information | 9


NOISE LEVEL Noise measurement is necessary in NOISE SPACE / APPLICATION
LEVEL
order to sustain the limits of comfort
25 dB Concert halls, Recording studios
zone. As the noise level is related to
the discharge velocity, the limitation 30 dB Bedrooms, Lecture rooms, Libraries

of the velocity holds the noise within 35 dB Residences, Hotel rooms, Hospital rooms, Offices,
Restaurants, Cinemas
normal levels. Indicator values for
the noise level are shown on the 40 dB Retail stores, Laboratories, Waiting rooms
AIR FLOW FUNDAMENTALS next table (TEEGreek Technical 45 dB Kitchens, Server rooms, Super markets

Chamber instructions). 50 dB Light industry


Those aspects that Pressure air drop (DP)
characterize each air outlet Throw
in order to ensure the Drop - Rise
DROP-RISE Drop, as presented in the figure below, is the vertical distance between the centerline of the
desired conditions for the Noise Level grille and the intersection of the airstream at the end of the throw. When the air that comes out
intended application are: Spread from a diffuser is colder that the air in the ventilated room, it has greater density and tends to
Air outlet velocity (being heavier) descent, creating the phenomenon of drop. Also, when the density of the fed
air is less than that of the air in the room, then the lighter-fed fluid rises to the ceiling creating
the effect of the rise. This applies to wall-mounted grilles and is not applicable in the present
DISTRIBUTION OF AIR CONDITIONING OUTLETS case where the grille is mounted on a roof.

The purpose of the experimental and computational study of University of Patra, under the supervision of Mr. Dionysios-
air distribution vents with air grilles, manufactured by Ventus Eleftherios Margaris. Every air-conditioned area should
is to acknowledge and develop the appropriate operating be ventilated evenly to avoid any discomfort caused from
range of these air grilles and the fundamental values that temperature changes or air velocity. The following table

RISE
characterize them. The experimental and computational shows the range of optimum air velocity depending on the
study took place at the Laboratory of fluid dynamics at the application.

AIR STREAM DIRECTION


ROOM AIR VELOCITY (m/s) PERSONS REACTIONS APPLICATION qv
0-0.08 Sweltering environment None

DROP
0.13 Optimal speed Everywhere
0.25 Maximum tolerated speed for individual sitting space Everywhere
Isovel for 0.5 m/s
0.33 Adverse Several
0.38 Maximum limit per person moving in a space Commercial shops
THROW
0.38-1.52 High air speeds Only Industrial

SPREAD Air passing through a diffuser, when there are no obstacles in the air stream, takes the form of
AIR OUTLET VELOCITY AND VELOCITY SPACE / APPLICATION asymmetrical beam. Spread is defined as the maximum distance between the two symmetrical
OUT VC (M/S)
LIMIT VELOCITY RANGE
1.5-2.5 Libraries ends normally formed by the beam.
Air velocity at a distance of approximately 2,5cm from 2.5-3.8 Hotels, offices, houses
the grille is called the air exit velocity Vc (m/s). Under the 4.0 Restaurants and dining rooms
regulation followed in this study and shown in the above 5.0 Gyms, assembly hall
figure, the maximum velocity in forming the boundary of
7.0 Factories, commercial stores
the range and diffusion is 0.5m/s. Table below presents the
ranges of air output velocities depending on the application.

SPREAD
AIR STREAM DIRECTION
qv
PRESSURE AIR DROP THROW
Diffusers cause a pressure drop in the airstream that must be As presented in the figure above, is defined as the horizontal
considered when calculating the pressure drop of the fan. distance from the diffuser to a point in the mixed airstream,
The passage of air through a diffuser causes a pressure drop where the maximum sustained velocity has been reduced to Isovel for 0.5 m/s
due to the conversion of the air energy to speed and due to a specific value (0.5 m/s) defined by the regulations under the
friction phenomena in the diffuser itself. CYPRUS STANDARD (CYS EN: 12238:2001).

10 | General Information General Information | 11


Measuring Room

TESTING
PROCEDURE MEASURING CHAMBER DESCRIPTION
Measuring chamber (chamber dimensions: 10,0 x 5,5
x 2,75 m = 151,25 m). The measuring chamber is a
INTRODUCTION metallic and sensored support scaffold system with
motion in three axes, in order to be able to process
These measurements were made according to the European
an interior full scan of the interior of the test chamber.
Standard CYS EN 12238:2001 in an effort to determine
In the measuring chamber can be measured surface
throw, drop and spread for each value of the supply. This Pitot-static tube gauge
mounting outlets of any kind (linear, with aerostats,
research project concerns the certification of air conditioning during measuring
curved with fins, jet nozzles, etc.), with maximum
outlets of grilles, which were experimentally tested and
dimensions 1,20 X 0,55 m. Also, provision is made
computationally simulated. The certification concerns the
for ceiling orifices study of any kind with maximum
control of air supply of each discharge and finding the range
dimensions 1,20 X 1,20 m. Figure below shows the
from the grille, i.e. in finding the distance in length that will
laboratory area. The main elements that characterize
reach the air but also in finding the width (opening) of the
the industrial area are:
outflow. At the same time, measurements of the noise levels
for different air flow from the grille was made. Furthermore, 1. Window benefit adjustment hall
for each supply, measurement of the air pressure took place 2. Grille Wall
in order to determine the pressure difference Δp, which 3. Orifice room
requires calculations from manometer fans in air conditioning 4. Installation location measuring instrument
systems or the various sites. Moreover, the technical 5. Z-Axis
characteristics of the grille masured for air exit velocity from 6. Y-Axis
the grille minimum value of Vc =1 to 2 m/s up to a maximum 7. X-Axis
value of Vc =10 m/s.

Sound meter

4
2

Pitot-static tube and


MP210 Digital Pressure
Gauge

12 | General Information General Information | 13


CANYON
FLOWBAR
SYSTEMS
The flowbar diffuser
that delivers higher
airflow with lower
noise levels.

WWW.VENTUSAIR.EU

14 | Canyon Flowbar Systems Canyon Flowbar Systems | 15


FASTENING METHODS

CANYON FLOWBAR SYSTEM CANYON FLOWBAR SYSTEM


CEILING METHOD A CEILING METHOD B

STEP 1 STEP 2 STEP 3 STEP 4


Fix UD CHANNEL on the Placing CHANNEL CD Place the CANYON grille Mount UD CHANNEL
In situation where Fastening Method A
ceiling with romplax. vertical in UD CHANNEL. in between CD CHANNELS at the height where the
cannot be applied, use Fastening Method B
Fixing with drywall screws. by Leveling the grille using gypsumboard will be
as described below.
a laser leveling tool and fix installed and then place and
with double thread screws. mount the CD CHANNEL
Use a 6mm diameter threaded rod and fix
inside the UD CHANNEL.
it in the ceiling. Then place the CANYON
STEP 5 flowbar between hanging threaded rods and
In the final stage, place the gypsumboard and finish the join between gypsumboard and PVC. fix it place after leveling with a laser leveling
tool. Apply step no 4 and no 5 from the
previous fastening method.
LEGEND
12mm White PVC
12mm Black PVC
C Channel
U Channel
Gympsumboard 12,5mm STEP 1 STEP 2 STEP 3 STEP 4
Ceiling

Illustration of the system


intersection on a roof
installation.

16 | Canyon Flowbar Systems Canyon Flowbar Systems | 17


CANYON FLOWBAR SYSTEM CANYON 4-WAY SLOT DIFFUSER
CEILING METHOD C CEILING

LEGEND
12mm White PVC
12mm Black PVC
Aluminum Frame
C Channel
U Channel
Gympsumboard 12,5mm
Ceiling

Side view of the system intersection Rear view of the system intersection
on a ceiling installation on a ceiling installation

CANYON FLOWBAR SYSTEM STEP 1 STEP 2 STEP 3 STEP 4


The metal frame is placed Silicone residues are cleaned The surface is covered with The surface is rubbed with
WALL in the opening of the from the metal frame with a stabilizer, and it is painted sandpaper until it becomes
gypsumboard and it is sponge. with any kind of paint. The smooth and then it is
TECHNICAL screwed. Then, the space gaps that are created on painted.
INSTRUCTIONS between the two surfaces is the joints are filled with
filled with acrilic silicone. compound.
The installation process on
the wall differs only in the
fact that application of the
system must be made in
such a way that the orifice
contacts the wall using
gypsum stripes and metal
corners as shown in the LEGEND LEGEND
figure 9 leveling the system
12mm White PVC 12mm White PVC
according to wall. 12mm Black PVC 12mm Black PVC
Metal Corner Aluminum Frame
Wall C Channel
U Channel
Gympsumboard 12,5mm
Ceiling

Illustration of the system


intersection on a wall
installation.

18 | Canyon Flowbar Systems Canyon Flowbar Systems | 19


Canyon Flowbar
1 2
PRESSURE DROP

Systems

ΔP (Pa)
THROW 2
CROSS-SECTIONS Designed for both heating and
1
cooling supply applications
can be used for ceiling and
side wall installations. This
system maximizes engineering
performance without sacrificing
aesthetic considerations.

Throw (m)
Flowbar’s outstanding
performance allows more
volumetric flow per linear meter
while minimizing noise and
pressure loss. Canyon Flowbars
are available in a variety of
different sizes and fastening
methods and can also be
customized to your needs and
project standards.

FEATURES VELOCITY
1 2

Adjustable deflection 35dB

25-50 mm spacing available


Custom made dimensions

DIMENSIONS Curved: Concave, Convex 30dB

Mitered corners

CANYON A B C D E F G H I J K L M Multiple ways of fastening


27.5d
280

Vc (m/s)
B
25 mm 25 - 171 - 36 121 100 99 30O 191 24 12 13
320 APPLICATIONS
300
50 mm 50 - 196 - 36 146 120 99 30 O
216 24 12 13 Canyon Flowbar Systems are 25dB
400
designed to be used for supply
and exhaust of cooled and
heated air on a adjustable
RECOMMENDED VELOCITY FREE AREA (AC) LEGEND 22.5d
B
deflection. They can be placed
in ceilings and walls. 25 x 1000 mm (1)
CANYON Vmin (m/s) Vmax (m/s) CANYON 25mm 50mm 50 x 1000 mm (2)

25 mm 2.5 5 Ac 0,025 m2 0,05 m2


Q (m³/h)
50 mm 2.5 5

20 | Canyon Flowbar Systems Canyon Flowbar Systems | 21


Canyon 4-way
PRESSURE DROP

Slot Diffuser

ΔP (Pa)
THROW
Designed for both heating and cooling supply applications and can be used for ceiling
and side wall installations. This system maximizes engineering performance without
sacrificing aesthetic considerations. Flowbar’s outstanding performance allows more LEGEND
volumetric flow per linear meter while minimizing noise and pressure loss. Canyon 18mm White PVC
12mm Black PVC
Flowbars are available in a variety of different sizes and fastening methods and can also Aluminum Frame
be customized to your needs and project standards.

Throw (m)
ADVANTAGES
CROSS-SECTIONS
Fully customized dimensions
Moisture formation is
eliminated
Integrated Plenum Box
Multiple ways of fastening
(it can be fastened as an
access panel)
Horizontal 360 distribution

FEATURES VELOCITY
4 way air deflection
40 mm spacing available
35d
Custom made dimensions B

Multiple ways of fastening

DIMENSIONS 30d
APPLICATIONS B

Vc (m/s)
A B C D E F G H I J K The 4-way Canyon ceiling
480 113 380 - 36 276 18 356 30 O
12 185 diffuser series are designed to 27.
5d
B
be used for supply and exhaust
of cooled and heated air on

RECOMMENDED VELOCITY FREE AREA (AC) a fixed 45 degree deflection. 25d


B
They can be placed in ceilings.
CANYON Vmin (m/s) Vmax (m/s) CANYON 4-WAY Air supply with ceiling effect in
4-way.
40 mm 2 4 4-WAY 0,052m2

Q (m³/h)

22 | Canyon Flowbar Systems Canyon Flowbar Systems | 23


Canyon Return ACCESSORIES

Flowbar Systems DUMMY CFS CROSS-SECTION DCF01


ACCESSORIES
DUMMY CFS consist a great
solution for the areas where the
grill is not applicable, creating
a high aesthetic result of
continuous lines, with active and
inactive areas, without breaking
the uniformity of the whole.

CROSS-SECTIONS
CANYON RETURN FLOWBAR
SYSTEMS has been designed DCF03
to provide excellent looks
without sacrificing efficiency DCF02
and economy especially
when canalized air flow is not
necessary.

FEATURES
Zero deflection (return)
25-50 mm spacing available
Custom made dimensions
Curved: Concave, Convex
Mitered corners
Multiple ways of fastening
DIMENSIONS

CANYON A B C D E F G
DCF04 DCF05
25 mm 115 25 171 80 13 30 12
DCF01
50 mm 140 50 196 80 13 30 12 Mitered Straight

DCF02
SIDE VIEW FREE AREA (AC) Mitered Corner

CANYON 25mm 50mm DCF03


Ac 0,025 m2 0,05 m2 Mitered Rounded Corner

DCF04
Mitered Tee

DCF05
Mitered Cross

24 | Canyon Flowbar Systems Canyon Flowbar Systems | 25


LINEAR
BAR
GRILLES
The bar grilles that
defines the standard
for the industry. With
high quality and
competitive pricing
these grilles form
the back bone of a
standard offering.

WWW.VENTUSAIR.EU

26 | Linear Bar Grilles Linear Bar Grilles | 27


FRAMES FASTENING METHODS

SUPPLY SUPPLY SUPPLY

CORE SUPPLY & RETURN


DIFFERENTIATIONS Canvas Canvas
Frameless core can be selected among Canvas
a wide range of series of grilles, diffusers Whether its supply or return

or custom design patterns to fit onto the grille, we can help you channel
air through the grille using a
available frames or stand alone. Suitable for
canvas fabric (glowed on a
wall and ceiling mounting.
behind the grille PVC frame)
or a plenum box. According
to your project standards and
REGULAR
needs here are some examples
Regular frame comes integrated on the on how you can canalize the air
selected core. This frame protrudes from to the grille.
the wall while covering the imperfections
around the wall opening. Suitable for wall The following figures illustrate

and ceiling mounting. six different fastening methods


of linear bar grilles separated in
supply and return.

REGULAR REVERSE
REF 01
Regular reverse frame comes integrated Regular frame grille with visible
RETURN RETURN RETURN
on the selected core. This frame leaves a screw fixing.
12.5mm peripheral depth space for the REF: 01 REF: 02 REF: 03
plasterboard to fit. Suitable for wall and REF 02
ceiling mounting. Regular frame grille with
concealed support springs. SUPPLY SUPPLY SUPPLY

REF 03
Canvas
Regular reversed frame grille
with non visible screw fixing.
LEVEL
A PVC to plasterboard joint
Level frame is an aluminum frame which lets procedure must be applied (see
the selected core to fit inside. This frame page 5).

leaves a 12.5mm peripheral depth space for


REF 04
the plasterboard to fit. Suitable for wall and
Core grille with non visible screw
ceiling mounting.
fixing. A PVC to plasterboard
joint procedure must be applied
(see page 5).

REF 05
LEVEL (CEILING) Level aluminum frame grille
with non visible screw fixing and
Level ceiling frame is an aluminum frame
support springs.
which lets the selected core to fit inside. This
frame leaves a 12.5mm peripheral depth
REF 06
space for the plasterboard to fit. Suitable for
Level ceiling aluminum frame
ceiling mounting only. grille with non visible screw
fixing. RETURN RETURN RETURN

REF: 04 REF: 05 REF: 06

28 | Linear Bar Grilles Linear Bar Grilles | 29


Linear 8-5
1
PRESSURE DROP 2
3
4

Grilles
6

ΔP (Pa)
1 2 3 4
THROW 15
5
With a fixed specific angle deflection and an aesthetically pleasing line, the LR 8-5 APPLICATIONS 6
Bar Grille is an advanced linear grille ideal for wall and ceiling applications for
The Linear bar grilles series 7
your commercial or residential project. Surpassing architectural and engineering
are designed to be used for
applications that require both design and high engineering performance, this is a
supply and exhaust of cooled
premium quality product.
and heated air on a fixed zero
deflection. They can be placed

Throw (m)
The LR 8-5 Bar Grille is a fully customizable product available in a variety of different in ceilings, walls, separate units,
sizes, colors, finishes, and fastening methods. fan coils and on air ducts.

CROSS-SECTION FEATURES
Fixed zero deflection
Custom spacing available
Custom made dimensions
Curved available: Concave,
Convex
Mitered corners (interior,
1 2 3 4
exterior)
VELOCITY
Multiple ways of fastening 5
37
dB
DIMENSIONS FRONT 6

A B C D E
150mm 18mm 15mm 8mm 5mm 32
dB 7

Vc (m/s)
FREE AREA (AC)
27
dB
L/H 600 800 1000 LEGEND
100 0.045 m2
600 x 150 (1)
150 0.039 m2 0.053 m2 0.067 m2 800 x 150 (3)
800 x 200 (5)
200 0.077 m2 0.097 m2 1000 x 100 (2)
LEGEND 1000 x 150 (4)
300 0.157 m2 1000 x 200 (6)
12mm Black PVC 1000 x 300 (7)

Q (m³/h)

30 | Linear Bar Grilles Linear Bar Grilles | 31


Linear 12-5
2 1
PRESSURE DROP 3
4
5

Grilles
6

ΔP (Pa)
7

21 3
THROW 15
4
With a fixed specific angle deflection and an aesthetically pleasing line, the LR 12-5 APPLICATIONS 5
6
Bar Grille is an advanced linear grille ideal for wall and ceiling applications for
The Linear bar grilles series
your commercial or residential project. Surpassing architectural and engineering 7
are designed to be used for
applications that require both design and high engineering performance, this is a
supply and exhaust of cooled
premium quality product.
and heated air on a fixed zero
deflection. They can be placed

Throw (m)
The LR 12-5 Bar Grille is a fully customizable product available in a variety of different in ceilings, walls, separate units,
sizes, colors, finishes, and fastening methods. fan coils and on air ducts.

CROSS-SECTION FEATURES
Fixed zero or angled
deflection
Custom spacing available
Custom made dimensions
Curved available: Concave,
Convex
2 1 3
Mitered corners (interior,
VELOCITY
exterior) 4

FRONT Multiple ways of fastening 5


DIMENSIONS
37dB
6

A B C D E
150mm 18mm 15mm 12mm 5mm

32dB 7

Vc (m/s)
FREE AREA (AC)

L/H 600 800 1000 LEGEND


27dB
100 0.046 m 2
600 x 150 (1)
150 0.047 m2 0.063 m2 0.079 m2 800 x 150 (3)
800 x 200 (5)
200 0.090 m2 0.113 m2 1000 x 100 (2)
LEGEND 1000 x 150 (4)
300 0.182 m2 1000 x 200 (6)
12mm Black PVC 1000 x 300 (7)

Q (m³/h)

32 | Linear Bar Grilles Linear Bar Grilles | 33


Linear 10-7
1 2
PRESSURE DROP
3
4
5

V-Cut Grilles
6

ΔP (Pa)
7

12 3 4
THROW 15 5
With a fixed specific angle deflection and an aesthetically pleasing line, the LR 10-7 APPLICATIONS
6
Bar Grille is an advanced linear grille ideal for wall and ceiling applications for
The Linear bar grilles series
your commercial or residential project. Surpassing architectural and engineering 7
are designed to be used for
applications that require both design and high engineering performance, this is a
supply and exhaust of cooled
premium quality product.
and heated air on a fixed zero
deflection. They can be placed

Throw (m)
The LR 10-7 Bar Grille is a fully customizable product available in a variety of different in ceilings, walls, separate units,
sizes, colors, finishes, and fastening methods. fan coils and on air ducts.

CROSS-SECTION FEATURES
Fixed zero or angled
deflection
Custom spacing available
Custom made dimensions
Curved available: Concave,
Convex
2 1 3 4
Mitered corners (interior,
VELOCITY 5
exterior)
DIMENSIONS FRONT Multiple ways of fastening 6

37dB
A B C D E F
150mm 18mm 15mm 10mm 7mm 45o
7

32dB
FREE AREA (AC)

Vc (m/s)
L/H 600 800 1000
100 0.045 m2
LEGEND 27dB

150 0.039 m2 0.053 m2 0.067 m2 600 x 150 (1)


800 x 150 (3)
200 0.077 m2 0.097 m2 800 x 200 (5)
1000 x 100 (2)
300 0.157 m2 LEGEND 1000 x 150 (4)
1000 x 200 (6)
12mm Black PVC 1000 x 300 (7)

Q (m³/h)

34 | Linear Bar Grilles Linear Bar Grilles | 35


Square
1
PRESSURE DROP 2

Grilles

ΔP (Pa)
1
THROW 15
With a fixed specific angle deflection and an aesthetically pleasing line, the LR 8-8 APPLICATIONS 2
Bar Grille is an advanced linear grille ideal for wall and ceiling applications for
The Linear bar grilles series 3
your commercial or residential project. Surpassing architectural and engineering
are designed to be used for
applications that require both design and high engineering performance, this is a
supply and exhaust of cooled
premium quality product.
and heated air on a fixed zero
deflection. They can be placed

Throw (m)
The Square Bar Grille is a fully customizable product available in a variety of different in ceilings.
sizes, colors, finishes, and fastening methods.

FEATURES
CROSS-SECTION
Fixed zero deflection
Custom spacing available
Custom made dimensions
Multiple ways of fastening

1
VELOCITY

42
dB
DIMENSIONS FRONT 2

A B C D E
3
400mm 18mm 20mm 8mm 8mm

32
dB
Vc (m/s)
FREE AREA (AC)

L/H 400 500 600

27
dB
400 0.061 m2
500 0.096 m2
LEGEND
600 0.142 m2
LEGEND 400 x 400 (1)
500 x 500 (2)
12mm Black PVC 600 x 600 (3)

Q (m³/h)

36 | Linear Bar Grilles Linear Bar Grilles | 37


LOOK LIKE
CANYON
GRILLES
The linear single slot
diffuser that delivers
higher airflow with
lower noise levels.

WWW.VENTUSAIR.EU

38 | Look Like Canyon Grilles Look Like Canyon Grilles | 39


FRAMES FASTENING METHODS

REGULAR Whether its supply or return


grille, we can help you channel
Regular frame comes integrated on the air through the grille using a
selected core. This frame protrudes from plenum box-grille configuration.
the wall while covering the imperfections To understand how please go to
around the wall opening. Suitable for wall page 53.
and ceiling mounting.
The following figures illustrate
three different fastening
methods of look like canyon
grilles attached on the dry wall
REGULAR REVERSE ceiling set-up.

Regular reverse frame comes integrated


on the selected core. This frame leaves a REF: 01
12.5mm peripheral depth space for the
plasterboard to fit. Suitable for wall and
REF 01
ceiling mounting.
Regular frame Look Like
Canyon grille fastened with a
Π mounting metal bracket and
pan-head machined screw.

LEVEL
REF 02
Level frame is an aluminum frame which lets Level aluminum frame Look Like
the selected core to fit inside. This frame Canyon grille with non visible
leaves a 12.5mm peripheral depth space for screw fixing and stainless steel
the plasterboard to fit. Suitable for wall and support springs.
ceiling mounting.
REF 03
Regular reversed frame Look
Like Canyon grille with non
REF: 02
visible screw fixing. A PVC to
plasterboard joint procedure
must be applied (see page 5).

LEGEND
18mm White PVC
12mm Black PVC
Aluminum Frame
Gympsumboard 12,5mm REF: 03

40 | Look Like Canyon Grilles Look Like Canyon Grilles | 41


Look Like
PRESSURE DROP
2

Canyon Grilles 1

ΔP (Pa)
3

THROW 1
With a fixed specific angle deflection and an aesthetically pleasing line, the LLC linear APPLICATIONS 2
3
Grille is an advanced single slot linear grille ideal for wall and ceiling applications for
The Look Like Canyon grilles
your commercial or residential projects. Surpassing architectural and engineering
series are designed to be
applications that require both design and high engineering performance, this is a
used for supply and exhaust
premium quality product. The LLC linear Grille is a fully customizable product available
of cooled and heated air on a
in a variety of different sizes, colors, finishes, and fastening methods.
fixed zero deflection. They can

Throw (m)
be placed in ceilings, walls,
CROSS-SECTIONS separate units, fan coils and on
air ducts.

FEATURES
Zero fixed deflection
Custom made dimensions
25 - 35 - 45 mm spacing
available
Curved available: Concave, 1
Convex VELOCITY
2
Mitered corners (interior,
exterior) 3
Multiple ways of fastening
35d
B

DIMENSIONS

Vc (m/s)
LLC A B C D E F G 30d
B
O
25 mm 90 25 150 18 - 9 22,5
35 mm 100 35 150 18 - 9 22,5O
45 mm 110 45 150 18 - 9 22,5O
25d
B

LEGEND
LEGEND
FREE AREA (AC) FRONT 25 x 1000 mm (1)
18mm White PVC 35 x 1000 mm (2)
12mm Black PVC 45 x 1000 mm (3)
L/H 25 mm 35 mm 45 mm
150 0.022 m 2 0.031 m 2 0.041 m2 Q (m³/h)

42 | Look Like Canyon Grilles Look Like Canyon Grilles | 43


V-SLOT
DIFFUSERS
The ceiling mounted
diffuser that maintains
a uniform, horizontal
discharge pattern
over widely varying
flow rates.

WWW.VENTUSAIR.EU

44 | V-Slot Diffusers V-Slot Diffusers | 45


FRAMES FASTENING METHODS

REGULAR Whether its supply or return


grille, we can help you channel
Regular frame comes integrated on the air through the grille using a
selected core. This frame protrudes from plenum box-grille configuration.
the wall while covering the imperfections To understand how please go to
around the wall opening. Suitable for wall page 53.
and ceiling mounting.
The following figures illustrate
three different fastening
methods of look like canyon
grilles attached on the dry wall
REGULAR REVERSE ceiling set-up.

Regular reverse frame comes integrated


REF: 01
on the selected core. This frame leaves a
12.5mm peripheral depth space for the
plasterboard to fit. Suitable for wall and
REF 01
ceiling mounting. Regular frame V-slot diffuser
fastened with a Π mounting
metal bracket and pan-head
machined screws.

LEVEL REF 02
Level aluminum frame V-slot
Level frame is an aluminum frame which lets
diffuser with non visible screw
the selected core to fit inside. This frame
fixing and stainless steel support
leaves a 12.5mm peripheral depth space for
springs.
the plasterboard to fit. Suitable for wall and
ceiling mounting. REF 03
Regular reversed frame V-slot
REF: 02
diffuser with non visible screw
fixing. A PVC to plasterboard
joint procedure must be applied
(see page 5).

LEGEND
18mm White PVC
12mm Black PVC
Aluminum Frame
Gympsumboard 12,5mm REF: 03

46 | V-Slot Diffusers V-Slot Diffusers | 47


V-Slot
PRESSURE DROP 1

Diffusers

ΔP (Pa)
THROW 1
With a fixed 45 degree 4-way deflection and an aesthetically pleasing line, the V-Slot The V-Slot diffuser is a fully 2
3
is an advanced linear diffuser ideal for ceiling applications for your commercial or customizable and available in a
residential project. Surpassing architectural and engineering applications that require variety of different sizes, colors,
both design and high engineering performance, this is a premium quality product. finishes, and fastening methods.

Throw (m)
CROSS-SECTION APPLICATIONS
The V-Slot linear diffusers series
are designed to be used for
supply and exhaust of cooled
and heated air on a fixed 45
degree deflection. They can be
placed in ceilings, walls or on
air ducts. Air supply with ceiling
effect in 4-way.

FEATURES VELOCITY 1

4-way air deflection


35dB
Custom made dimensions 2

25 - 35 - 45 mm spacing
available
DIMENSIONS 3
Curved available: Concave, 30dB
Convex, Flat face
LLC A B C D E F G H
Mitered corners (interior,

Vc (m/s)
25 mm 138 64 114 150 40 18 9 45O
exterior)
35 mm 158 64 134 172 40 18 9 45O Multiple ways of fastening 25dB
O
45 mm 178 64 154 190 40 18 9 45

LEGEND 20dB
FREE AREA (AC) FRONT LEGEND
25 x 1000 mm (1)
18mm White PVC 35 x 1000 mm (2)
L/H 55 76 98 12mm Black PVC 45 x 1000 mm (3)

150 0.055 m2 0.076 m2 0.098 m2


Q (m³/h)

48 | V-Slot Diffusers V-Slot Diffusers | 49


CUSTOM
GRILLES
Meet your own
project standards by
adding a unique
decorative and
functional element
to any room.

WWW.VENTUSAIR.EU

50 | Custom Grilles Custom Grilles | 51


CURVED TO FIT
YOUR IDEAS

Ventus custom air


technologies offers
both perforated and
linear bar grilles
that can be curved
to accommodate
curved applications
for walls, ceilings,
countertops and floors
in residential and
commercial projects.

Whether you are looking for a perforated


grille that is historically accurate for use in a Our custom made
renovation, or an aesthetically pleasing and curved grilles are
artistic design that will compliment your unique CONCAVE CONVEX
available in a variety of
style, Ventus Custom Air Technologies has a sizes, radiuses, frames,
perforated grille pattern to suit your need and styles, materials and
if we don’t then we’ll happily work with you to finishes, and can also
customize one. be customized to your
needs and project
Inspired by our travels around the world, the standards.
people we meet, cultural experiences and
architectural influences, we are able to discover
new materials, patterns, manufacturing best
practices and product applications which
benefits our discerning clientele.
Specializing in convex, concave and flat
face curved grilles, we are able to facilitate
architectural design elements and
incorporate engineering requirements to
produce an aesthetically pleasing and
functional product for any space.

52 | Custom Grilles Custom Grilles | 53


PLENUM
BOXES
Ventus plenum box is
an optional plenum
for use with any grille
or diffuser series.
They provide a tight
horizontal or vertical
air pattern even at
low volumes.

WWW.VENTUSAIR.EU

54 | Plenum Boxes Plenum Boxes | 55


A/C & Grille FASTENING METHODS

Plenum Boxes Any grille or diffuser of our collection can become part of a plenum box – grille configuration according to the needs and
standards of your project. There are numerous grille-plenum fastening methods from a detachable to a non-detachable one.
Some of them are presented to the following illustrations.

Our Plenum Boxes made of 12mm PVC foam board are designed to guarantee a good FEATURES
distribution of the air, prior to diffusion through the terminals. Available with Side or
Fully customized dimensions
Top entry connections to customer-specific diameter/shape and a very good thermal
Plenum box made of PVC
and sound insulation performance.
foamboard
Suitable for supply and
extraction
CROSS-SECTION Excellent thermal and sound
insulation
Very light weight
Easy to modulate
REF: 01 REF: 02

THERMAL
CONDUCTIVITY
0.05W / m K
REF 01
Regular frame grille with
AVAILABLE COLOURS concealed support springs and
plenum box screwed in the dry
Black wall structure.

REF 02
THICKNESS
Regular reversed frame grille
12 mm with non visible screw fixing
attached on the plenum box
reversely.
ORDERING
When ordering plenum boxes REF 03
please specify length, width & Regular frame grille with
height, spigot size and position concealed support springs and
(top or side entry). plenum box hanging from a
6mm diameter threaded rod
fixed in the ceiling.

REF: 03

56 | Plenum Boxes Plenum Boxes | 57


CONTACT US
Custom air
HEAD OFFICES PARALIMNI PAPHOS VENTUS ONLINE techonologies
that define
P.O. Box 57046, 79 Stadiou 36A Aristoteli Savva WEBSITE
3311, Moutayiaka 5220, Paralimni 8025, Paphos www.ventusair.eu
Cyprus Cyprus Cyprus

your ideal living


EMAILS
GENERAL INQUIRIES:
TELEPHONE TELEPHONE TELEPHONE
[email protected]
(+357) 25 828 114 (+357) 23 744 013 (+357) 26 271 140

MOBILE
(+357) 99 348 809
MOBILE
(+357) 97 888 911
MOBILE
(+357) 99 348 816
SALES & MARKETING:
[email protected]
environment

CUSTOM AIR TECHNOLOGIES

Ventus Custom Air Technologies - Limassol, Cyprus © 2018.


All rights reserved - www.ventusair.eu

58 | Contact Details Contact Details | 59

You might also like