Singer": Machines

Form 8733 Revised
November, 1920
PRINTED IK U. S. A.
LIST
OF
PARTS
SINGER"
MACHINES
N0S.3M5,31-16,31-19,31-20,31-22,
31-24,31-27,31-32,31-34,31-35,
31-37, 31-39 and 31-42
THE SINGER MANUFACTURING COMPANY
FromTrode
theMark
library of: Superior Sewing Machine & Supply LLC
of THE SINGER MANUPAaURING COMPANY
INSTRUCTIONS FOR OILING
To ensure easy running and prevent unnecessary v/ear

of the parts which are in movable contact, the machine
requires oiling and when in continuous use, "TYPE B"
or "TYPE D" OIL, sold only by Singer Sewing Machine
Company, should be applied at least twice each day
to all oil holes marked "OIL".
Copyright, U.S. A., 1917, 1920, 1921, 1922, 1923, 1924, 1925 and 1929
by The Singer Manufacturing Company
All Rights Reserved for all Countries
From the library of: Superior Sewing Machine & Supply LLC
INDEX
PAGE
Attachments AND Accessobies Ill

Belt Guard Ill
Bench Stand 169
Binders 112
Bobbin Winders 157
Box Plaiter 127
CORDBRS 12S
Driving Attachment No. 12478 161
" 20141 164
Edge Folder 131
Feller 130
Finger Guard 130
Foot Lifter Parts 164
Guides 135
Hemmers 136
Heustitcher 142
Knee Lifter Parts 166
Knife Grinder 168
Lap Seam Feller 143
Machine Base 110
Machine No. 31-15 9
" 31-16 19
" 31-19 26
" 31-20 34
" " 31-22 44
" " 31-24 51
" " 31-27 59
" 31-32 67
" 31-34 74
" 31-35 81
" 31-37 89
" " 31-39 98
" 31-42 103
Numerical List of Parts 185
Obsolete Parts 177
Piping Attachments 148
Pressbr Feet 143
Quiltbrs 148
Rufflers 149
Sbambrs 152
Separating Blade (Kinged) 153
IN D EX—Continued
PAGES
Stand No. 25255 171
" 25265 172
" " 25279 173
" 25284 174
Stabting Treadle Parts 110
Strip Folders 133
Thread Unwinders 175
Throat Plates 153
Trimmings for End and Back Leaf Table 174
Tubular Trimming Attachment 154
Tucker 154
Tucker (Power) 155
" (Long Arm) 156
Welt Guide 156
SINGER Needles should be used

in SINGER Machines
These Needles and their Containers
are marked with the
Company's Trade Mark "SIMANCO.**" i
Needles in Containers marked
"FOR SINGER MACHINES"

are NOT SINGER made needles.
INSTRUCTIONS FOR ORDERING
In ordering from ihls list, use ONLY ihe part NUMBER In

the FIRST Column.
The number stamped on a Sewing Machine Part is in every

case the number of the single part only.
Every combination of parts sent out as such has its specific
number, which, although not stamped on the parts, must be used
when ordering the combination.
Each number always indicates the SAME PART in whatever
list it appears, or for whatever machine.
The letters after some of the numbers indicate the style of
finish only, as follows:
A-Hardened, Polished, Nickel Plated and Buffed.
A.A-Buffed and Chromium Plated.
A.B-Hardened, Polished, Buffed and Chromium Plated.
A.C-Brown Baking Enamel Finish.
A.D-Gray Baking Enamel Finish.
A.E-Hardened, Bright Rumbled •and Nickel Plated.
A.F-Hardened, Bright Rumbled, Nickel Plated, Bright Rumbled and
Chromium Plated.
A.G-Alumilite, Plain.
A.fd-Alumilite Dyed.
A.J-Polished, Nickel Plated and Chromium Plated.
A.K-Hardened, Polished, Nickel Plated and Chromium Plated.
A.L-Heat Treated for Toughness.
B-Polished, Nickel Plated and Buffed.
C-Hardened only.
C.R-Hardened and Merlized.
D-Polished Only.
E-Soft, Not Polished.
F-Mardened and Polished.
F.J-Hardened, Polished and Nickel Plated.
G-Bright Rumbled and Nickel Plated.
H-Blued.
J-Nickel Plated Only.
K-Hardened and Nickel Plated.
L-Brass Plated.
M-Oxidized.
N-Japanned, Dull.
INSTRUCTIONS FOR ORDERING - Continued
P-Japanned, Bright.
P.P-Wrinkle Finish.
R-Merlized.
S-Cadmium Plated.
T-Copper Plated.
T.A-Hardened, Polished, Copper and Nickel Plated and Buffed.
T.B-Copper and Nickel Plated and Polished.
T.J-Copper and Nickel Plated Only.
T.K-Hardened, Copper and Nickel Plated.
T.L-Copper and Brass Plated.
T.M-Copper Plated and Oxidized.
U-Zinc Plated.
V-Silver Plated.
W-Polished and Nickel Plated.
X-Black Oxide, for Iron and Steel.
X.C-Hardened and Black Oxide, for Iron and Steel.
Y-Black Nickel Plated Only.
Z-Chromium Plated.
Z.A-Hardened, Polished, Nickel Plated, Buffed and Chrontium Plated.
Z.B-Polished, Nickel Plated, Buffed and Chromium Plated.
Z.C-Hardened and Chromium Plated.
Z.D-Polished and Chromium Plated.
Z.G-Bright Rumbled, Nickel Plated, Bright Rumbled and Chromium
Plated.
Z.J-Nickel and Chromium Plated.

Z.T-Copper and Chromium Plated.
These letters MUST BE USED when they appear in the list;
and After the number as in the list.
In this series:
1 to 1500, 50001 to 51500 and 140001 to 142000 are
Screw Numbers.
1501 to 1800 and 51501 to 51800 are Nut Numbers.
1801 to 2000 and 51801 to 52000 are Roller Numbers.
2001 to 50000 and 52001 to 140000 and 142001 to 190000
are Sewing Machine Parts, 190001 and upward are numbers
of Electrical Parts.
The figures in the second column refer only to the plates,
illustrating the parts, and are NOT TO BE USED in ordering.
Parts marked with an asterisk (st) are furnished only when repairs
are made at factory.
When ordering parts which differ as to Gauge (the distance
between seams) the Gauge, as well as the Number must be given on order.
MACHINE No. 31-15
FOR CLOTH, TAILORING, ETC. DROP FEED.
Arm with 11104

" Dowel Pin
" Oil Tube for intermediate bearing....
" " " with 52045, for oiling 12408
« « « «( «« II II 12409
" " « " " " " 20283
" " " Packing (braided cotton)..
" Screw (back)
" " (front)
" Shaft
'• 12427 with 20188, 20283 and
24036
Arm Shaft 44122 with 20197
" *' Bushing (front)
" " Flanged Bushing (back)....
" " " " « Set
Screw
3
10 PARTS FOR MACHINE No. 31-15
NO. PLATE NAME
144d 782 Arm Shaft Screw

12480 767 " Side Cap
219d 774 « " " Screw
12193 2004 " " Cover
286d 783 " " " Thumbscrew
12403 772 " Spool Pin and Thread Eyelet
11241 2003 " " " Washer (cloth)
12358 2000 Balance Wheel (power) light rim, 2^ in.
Pulley with two 448c
4370 2000 Balance Wheel (stand) heavy rim, 2% in.
pulley with two 448c
2135 2000 Balance Wheel (stand) heavy rim, 2)/^ in.
pulley, for 3022
2862 Balance Wheel (stand) heavy rim, 3 in.
pulley, for 3022
448c 783 Balance Wheel Set Screw
*12360 Bed
256j 2003 Clamp Stop Motion Clamp Screw
248a 2011 " « " " Stop Screw..
2020 2003 " " " " Washer
♦3023 " " " Flanged Bushing
4933 2003 " " " " "
3023 with two 462c
2022 773 Clamp Stop Motion Flanged Bushing Pin
462c 773 " " " " Set
Screw
3022j Clamp Stop Motion complete, Nos. 248a,
256j, 2020 and 4933
20197 2001 Crank Connecting Rod with 20198 and
two 896e
♦20198 Crank Connecting Rod Cap
896e 773 " " " " Screw
908c 773 " " " Hinge Screw
1619b 773 " " " " " Nut..
20057 Face Plate
♦44181 " " Thread Guard (lower)
12150 773 " " " " "44181
with 12152
12152 773 Face Plate Thread Guard (lower) Rivet...
2827 773 " " " " (upper) with
8505
8505 773 Face Plate Thread Guard (upper) Rivet...
190d 782 « " Screw
20058 5735 Face Plate complete, Nos. 2827,12150 and
20057
286d 783 Face Plate Thumb Screw
PABTS FOR MACHINE No. 31-15 11
NO. PLATE NAME

12368 767 Feed Bar
313c 783 " " Screw Centre
56813 " " " " 313c with 1619J
1519J 783 " " " " Nut
3033 770 " Connecting Link
375c 782 « " " Hinge Screw
1518J 783 " " " " " Nut
44262 6813 " Dog, 12 teeth (12 teeth to the inch)
Note: No. 44252 is sent with this machine unless
another Feed Dog is specified on order
20349 1267 Feed Dog, 13 teeth (16 teeth to the inch)

44253 5813 " " 16 teeth (16 teeth to the inch)
12437 777 « " 12 teeth (14 teeth to the inch)
four teeth at right of needle (square
corner)
12450 777 " "11 teeth (18 teeth to the inch)
for chiffon
for corset work
for finishing knit underwear
for general muslin work
for heavy work on duck, overalls, etc...
beveled for hemmer
beveled for hemmer
beveled for hemmer, for shirt work....
beveled for hemmer, for shirt work
beveled for hemmer, for shirt work
beveled for hemmer, for shirt work....
for tailor work
NO. PLATE NAME

for umbrella work
208b 782 Feed Dog Screw
20283 2020 " and Feed Lifting Eccentric with 446c
446c 783 " " " " " Set Screw
24036 2020 " " " " " Sleeve...
20284 2020 " Forked Connection
375c 782 " " " Hinge Screw....
1518J 783 " " " " « Nut
*43993 Feed Forked Connection complete, Nos.
818d, 3033, 3039, 20284 and two each
375c and 1518j
44125 5804 Feed Lifting Rock Shaft
44126 Feed Lifting Rock Shaft complete, Nos.
12376 and 44125
12376 770 Feed Lifting Rock Shaft Crank with 157j
and 1813
157j 782 Feed Lifting Rock Shaft Crank Clamping
Screw
43976 5804 Feed Lifting Rock Shaft Crank Connect
ing Rod with 43977 and two 966c
*43977 Feed Lifting Rock Shaft Crank Connect
ing Rod Cap
966b 5806 Feed liifting Rock Shaft Crank Connect
ing Rod Cap Screw
375c 782 Feed Lifting Rock Shaft Crank Connect
ing Rod Hinge Screw.
1518j 783 Feed Lifting Rock Shaft Crank Connect
ing Rod Hinge Screw Nut
1813 783 Feed Lifting Rock Shaft Crank Roller and
Stud
307c 783 Feed Lifting Rock Shaft Screw Centre
56814 " " " « " 307c
with 1513J
1513j 783 Feed Lifting Rock Shaft Screw Centre Nut
3039 768 " Regulator
1128E 2009 " " Hinge Screw
818d 783 " " Thumb Screw
12379 766 " Rock Shaft
29633 5736 " " " Crank with 157J
157j 782 " " " " Clamping Screw
20333 Feed Rock Shaft complete, Nos. 12379
and 29633
307c 783 Feed Rock Shaft Screw Centre
56814 " " « « " 307c with
1513J
1513j 783 Feed Rock Shaft Screw Centre Nut
PARTS FOR MACHINE No. 31-15 13
NO. PLATE NAME
12381 767 Needle Bar {hollow)

♦12382 770 " " Connecting Link with 794e ...
43997 " 12382 with
12384
794e 782 Needle Bar Connecting Link Adjusting
Screw
♦12383 Needle Bar Connecting Stud
1904 770 " " " Roller (roller
only)
453c 783 Needle Bar Connecting Stud Set Screw..
12384 770 Needle Bar Connecting Stud complete,
Nos. 453c, 1904 and 12383
20188 767 Needle Bar Crank with 858c and 1065c..
1065c 2011 " " " Position Screw
858c 783 " " " Set Screw
936e 773 " " Screw Bushing
4302 773 " " Thread Guide
233d 782 " " " " Screw
4303 773 " Clamp with 808f
808f 782 " " Screw
♦24104 2001 Oscillating Rock Shaft
24105 Oscillating Rock Shaft complete, Nos.
4784, 12388 and 24104
12388 767 Oscillating Rock Shaft Hinge Pin....
448c 783 Set
Screw
4784 1353 Oscillating Rock Shaft Oil Pad.
12389 766 Shaft
t(
19496 Crank for 19447
<i i<
44134 " " 44135
U u
2049 773 " Pin
(1 tt
457c 783 " Set Screw for 19447
li
453c 783
it
" " " '• 44135
U n
19448 2011 " Slide Block ...
226d 1371
it u
" Cap
Screw
12424 773 Oscillating Shaft Crank Slide Block Cap
Screw Washer
988c 2011 Oscillating Shaft Crank Slide Block Screw
Stud
1518j 783 Oscillating Shaft Crank Slide Block Screw
Stud Nut
19449 2011 Oscillating Shaft Crank Slide Block com
plete, Nos. 226d, 988c, 12424 and 19448
19447 2011 Oscillating Shaft Crank complete, Nos.
457c, 1518J, 19449 and 19496
NO. PLATE NAME

1518J, 19449, 44134 and two 453c
12391 767 Presser Bar (hollow)
20059 5736 " " Guide Bracket with 453c
453c 783 « " « " Set Screw....
2062 771 " " Lifter
689c 782 " « « Screw
1520J 783 " " " " Nut
12327 770 " " Lifting and Releasing Lever
Bracket
11167 767 Presser Bar Spring (light) .051 wire
another Spring is specified on order
12139 2004 Presser Bar Spring (medium) .055 wire...

20023 2004 « " " (heavy) .063 wire
11170 771 " " " Washer
12143 780 " Foot for 12369,12457 and 20349..
another Presser Foot is specified on order
12335 1308 Presser Foot (narrow) for 12369, 12457

and 20349
12258 1308 Presser Foot (wide) for 12369, 12457 and
20349
20343 781 Presser Foot with Guide on bottom to the
right of needle hole, for 12369, 12450
and 12457
12142 780 Presser Foot for 12370 and 20352
12144 780 " " " 12372, 12437, 12455,
12468, 12481, 20002, 20336 and 20471
12474 1308 PresserFootfor 12372,12481 and20002...
12260 780 " « " 12437,12450 and 20348...
12259 780 « " " 12425, 12481, 19474 and
20119
12261 1308 " " " 12481
20276 1259 " " " 20275
20020 1308 " " " 20018
20458 780 " " " 44136
12348 5837 " " " outside stays and strips
12311 5837 " " " shirt work
12467 781 " " " umbrella work
7298 2014 " " Hinge Pin
20268 " " Plate
20269 " " Shank
NO. PLATE NAME

20270 1308 Presser Foot (hinged) complete for 12369,
12457 and 20349, Nos. 7298, 20268 and
20269
7298 2014 Presser Foot Hinge Pin
19334 " " Plate
19335 " " Shank
43979 and 44136, Nos. 7298, 19334 and
19335
20310 " " Plate
19223 " " Shank
12437, 12455, 12468, 12481, 20002,
20336 and 20471, Nos. 19223, 20310 and
62527
20344 " " Plate
20345 " " Shank
26231 2014 " " Spring
20346 781 Presser Foot (spring hinged) complete for
12372, 12437, 12455, 12468, 12481,
20002, 20336 and 20471, Nos. 20344,
20345, 26231 and 62527
24544 " " Plate
24982 " " Shank
26231 2014 " " Spring
12425, 12481, 19474 and 20119, Nos.
24544, 24982, 26231 and 62527
190d 782 Pres.scr Foot Screw
688j 783 Pre.ssurc Regulating Thumb Screw
2996 771 Shuttle Bobbin
62739 " " Case
15140 2013 " " " Latch
2973 771 " " " " Lever
2974 771 " " " " " Fulcrum
Pin
2975 771 Shuttle Bobbin Case Latch Spring
592b 782 " " " " Stop Screw..
15141 Shuttle Bobbin Case Hinge, No.s. 2973,
2974 and 15140
7553 771 Shuttle Bobbin Case Position Finger
2523 771 " " " " " Rivet
24412 1361 " " " " Plate
391d 1366 " " " " " Screw
NO. PLATE NAME
62740 771 Shuttle Bobbin Case complete, Nos. 591f,

592e, 2523,2975,7553,15141,15278 and
62739
12393 771 Shuttle Body
591f 782 " Tension Regulating Screw
15278 771 " " Spring
19292 771 Shuttle, I'li in. diam., Nos. 2996, 12393
and 62740
♦12394 Shuttle Driver
12444 771 " " 12.394 with two 1266c. ...
2049 773 " Pin
1266c 5806 " " Set Screw
2531 767 " Race Back
2532 772 " Po-sition Pin
2533 767 " " " Spring
9071> 782 " Screw
24413 " Body
25000 " 24413 with 24414 and
two 1053u
24414 5837 Shuttle Race Cap
10531) 2006 " " " Screw
24415 1.361 Shuttle Race complete, Nos. 907d, 2531,
2533, 24412, 25000 and two each 391d
and 2532
145!) 782 Shuttle Race Screw
12431 " Slide
4307 772 " Spring
725e 1387 " " " " Screw
12432 2004 Shuttle Riicc Slide complete, No.s. 4307,
12431 and two 725e
20060 5736 Slack Thread Regulator
225f 5736 " " " Adju.sting Screw.
2102 5806 Tcn.sion Disc
1560c 783 " Regulating Thumb Nut
32572 5806 " Releasing Disc
43944 5806 Lever
12398 773 " Hinge Pin
12329 772 " Spring
32574 5806 Pin
50327c 5806 " Screw Stud
44141 " " " 50327c with 1500c...
43945 5806 " Spring
44118 Tension complete, Nos. 7336, 32572,
32574, 43945, 43946, 44141 and two
2102
52454 5842 Thread Retainer
624c 8628 " " Set Screw
NO. PLATE NAME
12404 770 Thread Take-up Crank.

3094 773 Wedge.
690b 782 Screw.
12408 770 Lever.
776b 782 Cap Screw
12166 773 Hinge Pin
12409 770 Link
11204 770 " Hinge Pin...
435c 5806 " " " Set
Screw..
12410 Thread Take-up Lever complete, Nos.
12166, 12408 and 12409
43946 5806 Thread Take-up Spring
7336 772 " " " Regulator
448c 783 " " " " Set Screw
43990 Thread Take-up complete, Nos. 775e,
11204, 12404, 12410 and 43997
44256 Throat Plate, large needle hole, for 44252
and 44253
Note: Two No. 44256 are sent with this machine unless
other Throat Plates are specified on order
44255 5813 Throat Plate, small needle hole, for 44252
and 44253
12412 778 Throat Plate, large needle hole, for 12370
and 43979
and 20002
and 20002
12466 " " small needle hole, for 12425
12465 " " large needle hole, for 12437
12440 777 " " small needle hole, for 12437
12464 777 " " large needle hole, for 12450
and 20348
and 20348
and 20471
and 20471
and 43978
NO. PIiATB NAME

and 43978
20120 1259 Throat Plate large oblong needle hole, for
20119
20187 Throat Plate, small oblong needle hole, for
20119
20353 1267 " « « « « « 20352
691f 782 " " Screw
44212 5844 Drip Pan with four 1 in. wire nails, for
power table

in SINGER Machines
are marked with the
Company's Trade Mark "SIMANCO.**

"FOR SINGER A\ACHINES"
are NOT SINGER made needles, z
19
LIST OF PARTS COMPLETE

FOR
MACHINE No. 31-16

FOR MACKINTOSH AND GOSSAMER WORK. HAS SPECIAL
SHUHLE AND SECTIONAL RACE FOR EASY REMOVAL OF
SHUTTLE FOR CLEANING. DROP FEED. SPECIAL PRESSED
FOOT AND OIL CUP. BOBBIN No. 2996.
NO. PLATE NAME
♦12355 Arm with 11104
8582 773 " Dowel Pin
12453 773 " Oil Tube for intermediate bearing—
11119 773 " " " with 52045, for oiling 12408
12454 773 " " " " " " " 12409
24131 2014 " " " " " " " 20283
52045 8628 " " " Packing (braided cotton)..
748b 782 " Screw (back)
854b 783 " " (front)
12427 766 " Shaft
♦44122 " Shaft 12427 with 20188, 20283 and
24036
♦44189 Arm Shaft 44122 with 20197
♦11104 " " Bushing (front)
12357 767 " " Flanged Bushing (back)
448c 783 " " " " " Set Screw
144d 782 " " Screw
12480 767 " Side Cap
219d 774 " " " Screw
12193 2004 " " Cover
286d 783 " " " Thumb Screw
11241 2003 " " " Washer (cloth)
2135 2000 Balance Wheel (stand) heavy rim, 2)^ in.
pulley, for 3022
2862 Balance Wheel Stand (heavy rim) 3 in.
pulley, for 3022
♦12360 Bed
248a 2011 " " " " Stop Screw...
2020 2003 " " " " Washer
NO. PLATE NAME

*3023 Clamp Stop Motion Flanged Bushing...
4933 2003 " " " " " 3023
with two 462c
462c 773 " " " " " Set
Screw
4

256j, 2020 and 4933 j
two 896b
*20198 Crank Connecting Rod Cap
896b 773 " « " " Screw
1619e 773 " " " " « Nut.
20057 Face Plate
*44181 « Thread Guard (lower)
12150 773 " " " " "44181
with 12152
12152 773 Face Plate Thread Guard (lower) Rivet..
2827 773 " " " " (upper) with
8505
8505 773 Face Plate Thread Guard (upper) Rivet
20058 5735 Face Plate complete, Nos. 2827, 12150
and 20057
190d 782 Face Plate Screw
286d 783 " " Thumbscrew
12368 767 Feed Bar
6681'3 " « « " 313c with 1519j
1519J 783 " " « " Nut
1518J 783 " " " " " Nut..

208e 782 « " Screw
446c 783 " " " « " Set Screw
24036 2020 « " " " " Sleeve...
375c 782 " " " Hinge Screw....
1518J 783 " " « " « Nut
NO. PLATE NAME

818d, 3033, 3039, 20284 and two each
375c and 1o18j
12376 and 44125
and 1813
157j 782 Feed Lifting Rook Shaft Crank Clamping
Screw
43976 5804 Feed Lifting Rock Shaft Crank Connecting
Rod with 43977 and two 966e
*43977 Feed Lifting RockShaftCrank Connecting
Rod Cap
966e 5806 Feed Lifting Rock Shaft Crank Connecting
Rod Cap Screw
375c 782 Feed Lifting Rock Shaft Crank Connecting
Rod Hinge Screw
1518j 783 Feed Lifting Rock Shaft Crank Connecting
Rod Hinge Screw Nut
Stud
307c 783 Feed Lifting Rock Shaft Screw Centre....
56814 " " " " " " 307c
with 1513j
1513j 783 Feed Lifting Rock Shaft Screw Cent re Nut
3039 768 Regulator
1128E 2009 " Hinge Screw
8180 783 " Thumb Screw
12379 766 Rock Shaft
29633 5736 " " Crank with 157j
157j 782 " " " Clamping Screw
20333 Feed Rock Shaft complete, Nos. 12379 and
29633
56814 " " " " " 307c with
1513J
12381 767 Needle Bar (hollow)
*12382 770 " " Connecting Link with 794e ..
43997 " " " " 12382 with
12384
794b 782 Needle Bar Connecting Link Adjusting
Screw '
1904 770 " " " " Roller (roller
only)
NO. PLATE NABiE
453c 783 Needle Bar Connecting Stud Set Screw...

Nos. 453c, 1904 and 12383
20188 767 Needle Bar Crank with 858c and 1065c....
858c 783 " " Set Screw
233d 782 « Screw
4303 773 " Clamp with 808p
808p 782 " " Screw
44222 Oil Cup
44223 « " 44222 with 44005
44214 " " Extension
44005 2565 " " " 44214 with 24075
24075 2565 " " " Post
44006 2565 " " Packing (felt)
44224 8628 " " Thread Retainer
44225 8628 Oil Cup complete, Nos. 44006, 44223 and
44224
*24104 2001 Oscillating Rock Shaft
4784, 12388 and 24104
12388 767 Oscillating Rock Shaft Hinge Pin
4784 1353 " " " Oil Pad
12389 766 " Shaft
19496 " " Crank for 19477
44134 " " " " 44135
2049 773 " Pin
457c 783 " " " Set Screw for 19447
453c 783 " " " " « " 44135
19448 2011 " SUde Block
2260 1371 « Cap
Screw
Screw Washer
Stud
Stud Nut
plete, Nos. 226d, 988c, 12424 and 19448
457c, 1518J, 19449 and 19496.
1518j, 19449, 44134 and two 453c
NO. PLATE NAME

12391 767 Presser Bar (hollow)....
20059 5736 " Guide Bracket with 453c....
453c 783 " " " Set Screw....
2062 771 " Lifter
689c 782 " " Screw
1520J 783 " " " Nut
12327 770 " Lifting and Releasing Lever
Bracket
20023 2004 " " " (heavy) .063 wire
11170 771 « " Washer
62527 5806 " Foot Hinge Pin
24544 " Plate
24982 " " Shank
26231 2014 " " Spring
12481, Nos. 24544, 24982, 26231 and
62527

12144 780 Presser Foot for 12481
12261 1308 " " " 12481
12474 1308 " " " 12481
62527 5806 " " Hinge Pin
20310 " « Plate
19223 " " Shank
Nos. 19223, 20310 and 62527
190d 782 Presser Foot Screw
688j 783 Pressure Regulating Thumb Screw
62739 " " Case
15140 2013 " " " Latch
2973 771 " " " " Lever
2974 771 " " " " " Fulcrum
Pin
592e 782 « " " " Stop Screw...
15141 Shuttle Bobbin Case Hinge, Nos. 2973,
2974 and 15140
2523 771 " " " " " Rivet
NO. PLATE NAME

592e, 2523, 2975, 7553, 15141, 15278
and 62739
59lP 782 " Tension Regulating Screw
15278 771 " " Spring
12487 Shuttle, IH ill- diam., Nos. 2996, 12488
and 62740
12444 771 " 12394 with two 1266c....
2049 773 " Pin
1266c 5806 " " Set Screw
2532 772 " " " Position Pin
2533 767 " Spring
648d 782 " Screw
20003 " " Body
20004 2005 " Cap
662d 782 " Screw
12492 2005 " Ring
12493 2005 " Clamp (left)
12494 2005 " " " (right)
21202 5837 " " " " Friction Spring
85d 2005 " Screw
20005 2005 Shuttle Race (sectional) complete, Nos.
648d, 2531,2533,12492 to 12494, 20003,
20004 and two each 85d, 662d, 2532 and
21202 :
145d 782 Shuttle Race Screw
12431 " Slide
4307 772 " Spring
725e 1387 " " " Screw
12432 2004 Shuttle Race Slide complete, Nos. 4307,
12431 and two 725e
225p 5736 " " " Adjusting Screw
2102 5806 Tension Disc
43944 5806 Lever."
12398 773 " Hinge Pin
12329 772 " Spring
32574 5806 Pin
44141 " 50327c with 1560c...
43945 5806 " Spring
NO. PLATE NAME

44118 Tension complete, Nos. 7336,32572,32574,
43945, 43946, 44141 and two 2102
624c 8628 " " Set Screw
12404 770 " Take-up Crank
3094 773 *' " " Wedge
690e 782 " " " " Screw
12408 770 " " Lever
775b 782 " " " Cap Screw
12166 773 " " " Hinge Pin
12409 770 " " " Link
11204 770 " " " " Hinge Pin...
435c 5806 " " " " " " Set
Screw
12166, 12408 and 12409
7336 772 " " " Regulator
448c 783 " " " " Set Screw
♦43990 Thread Take-up complete, Nos. 775e,
11204, 12404, 12410 and 43997
and 43978
and 43978
Note; Two No. 12483 are sent with this machine unless
691f 782 Throat Plate Screw
44212 5844 .Drip Pan with four 1 in. wire nails for
power table
20

FOR
MACHINE No. 31-19

FOR ENAMELED OR PUiN CLOTH; ALSO LIGHT LEATHER.
ESPECIALLY USEFUL FOR FABRICS OF UNEVEN THICK
NESS. HAS DROP FEED. ALTERNATING PRESSERS AND
BOBBIN No. 2996
NO. PLATE NAME
♦20339 Arm with 11104

12453 773 " Oil Tube for intermediate bearing...
11119 773 " " " with 52045,for oiling12408
and 19365
12454 773 Arm Oil Tube with 52045, for oiling 12409
24131 2014 " " " " " " " 20283
52045 8628 " " " Packing (braided cotton)...
748e 782 " Screw (back)
854e 783 " " (front)
12427 766 " Shaft
♦44121 " " 12427 with 20283, 24036 and
62637
♦44195 Arm Shaft 44121 with 20197
♦11104 " Bushing (front)
448c 783 "SetScrew
144d 782 " Screw
12193 2004 " Side Cover
286d 783 " " " Screw
12403 772 Arm Spool Pin and Thread Eyelet
11241 2003 *' " " Washer (cloth)
4370 2000 Balance Wheel (stand) heavy rim, 2^ in.
2135 2000 Balance Wheel (stand) heavy rim, 2J^ in.
pulley, for 3022
pulley, for 3022
♦12360 Bed
256J 2003 Clamp Stop Motion Clamp Screw
248a 2011 " Stop Screw..
2020 2003 " " " « Washer
NO. PLATE NAME

•3023 Clamp Stop Motion Flanged Bushing
4933 2003 " " " " " 3023
with two 462o
462c 773 " " " " « Set
Screw
256j, 2020 and 4933
two 896b
•20198 Crank Connecting Rod Cap
896e 773 " " " " Screw
1619e 773 " " " " " Nut
19354 Face Plate
•44181 " " Thread Guard (lower)
12150 773 " " " " " 44181
with 12152
12152 773 Face Plate Thread Guard (lower) Rivet
2827 773 " " " " (upper) with
8505
19354
12368 767 Feed Bar
56813 " " " " 313c with 1519j
1519J 783 " " " " Nut
375c 782 " " " Hinge Screw....
1518J 783 " « " " " Nut
Note; No. 12370 is sent with this machine unless
208b 782 " " Screw
446c 783 " " " " " Set Screw
24036 2020 " " " " « Sleeve...
1518J 783 « " " " " Nut
NO. PLATE NAME

818d, 3033, 3039, 20284 and two each
375c and 1518j
1237(5 and 44125
12376 770 Feed Lifting Rock Shaft Crank with 157.r
and 1813
Screw
43976 5804
Feed Lifting Rock Shaft Crank Connect
ing Rod with 43977 and two 966b
ing Rod Cap
966e 5806 Fcecl Lifting Rock Shjift Crank Connect
ing"Rod Cap Screw
ing Rod Hinge Screw
1518J 783 Feed Lifting Rock Sliaft Crank Connect
Stud
56814 " " " " " " 307c
with 1513j
1513j 783 Feed Lifting Rock Shiift Screw Centre Nut
1128b 2009 " " Hinge Screw
29633 5736 " " " Crank with 157j
157J 782 " " " " Clamping Screw..
29633
56814 " " " " " 307c with
1513»
12391 767 Lifting Presser Bar (hollow)
19356 1312 " " " Bell Crank
1990 1312 " " " " " Cap Screw
19357 1312 « " « « « Connecting
Link
199d 1312 LiftingPresser Bar BellCrank Connecting
Link Cap Screw
19358 1312 Lifting Presser Bar Bell Crank Driving
Arm
NO. PLATE NAME

Arm Pin
Arm Shaft
Arm Shaft Bracket
19361 Lifting Presser Bar Bell Crank Driving
Arm Shaft Bracket complete, Nos. 2049
and 19358 to 19360
965d 1312 Lifting Presser Bar Bell Crank Driving
Arm Shaft Bracket Screw
Arm Eccentric Connection
Arm Eccentric Connection 19362 with
19365
375c 782 Lifting Presser Bar Bell Crank Driving
Arm Eccentric Connection Hinge Screw
1518j 783 Lifting Presser Bar Bell Crank Driving
Nut
24589 5736 Lifting Presser Bar Guide Bracket with
453c
24716 Lifting Presser Bar Guide Bracket com
plete, Nos. 19356, 19357, 19366, 24589
and three 199d
453c 783 Lifting Presser Bar Guide Bracket Set
Screw
24590 5736 Lifting Presser Bar Guide Bracket Support
175d 5736 " " " " " «
Screw
4855 1312 Lifting Presser Bar Lifter
689c 782 " « " " Screw
1520J 783 " " " « " Nut
12327 770 " " " Lifting and Releasing
Lever Bracket
11167 767 Lifting Presser Bar Spring (light) .051wire
12139 2004 Lifting Presser Bar Spring (medium) .055
wire
20023 2004° Lifting PresserBarSpring (hea'vy) .063wire
11170 771 Lifting Presser Bar Spring Washer
19364 1312 " " Foot for 19370
NO. PLATE NAME

19375 1313 Lifting Presser Foot for 19374 and 19376
193d 1312 " " " Screw
*12382 770 " " Connecting Link with 794b. .
43997 « « " " 12382 with
12384
Screw
*12383 Needle Bar Connecting Stud
1904 770 " " " " Roller (roller
only)
463c 78S Needle Bar Connecting Stud Set Screw...
Nos. 453c, 1904 and 12383
19365 767 Needle Bar Crank and Lifting Eccentric
with 448c and 743c
743c 1313 Needle Bar Crank and Lifting Eccentric
Position Screw
Set Screw
936e 773 Needle Bar Screw Bushing
233d 782 " « " " Screw
4303 773 " Clamp with 808p
808f 782 " " Screw
4784, 12388 and 24104
448c 783 " " " " "SetScrew
4784 1353 " " " Oil Pad
12389 766 " Shaft
19496 " " Crank for 19447
44134 " " " " 44135
2049 773 " " " Pin
457c 783 « " " Set Screw for
19447
453c 783 Oscillating Shaft Crank Set Screw for
44135
19448 2011 Oscillating Shaft Crank Slide Block
226d 1371 " " " " "Cap
Screw
Screw Washer
NO. PLATE NAME

Stud
Stud Nut
plete, Nos. 226d, 988c, 12424 and 19448
457c, 1518J, 19449 and 19496
1518J, 19449, 44134 and two 453c
62739 " " Case
15140 2013 " " " Latch
2973 771 " " " " Lever
2974 771 " " " " " Fulcrum
Pin
592e 782 « " " " Stop Screw..
15141 Shuttle- Bobbin Case Hinge, Nos. 2973,
2974 and 15140
2523 771 " " " " " Rivet
24412 1361 " " " " Plate
391d 1366 " " " " " Screw
62740 771 Shuttle Bobbin Case complete, Nos. 591p,
592b, 2523, 2975, 7553, 15141, 15278
and 62739
591p 782 " Tension Regulating Screw
15278 771 " " Spring
19292 771 Shuttle, IH in. diam., Nos. 2996, 12393
and 62740
*12394 Shuttle Driver
12444 771 " " 12394 with two 1266c....
2049 773 " " Pin
1266c 5806 " " Set Screw
2533 767 " " " Spring
907d 782 " " " « Screw
24413 " " Body
62502 « " " 24413 with 24418 and
two 1053d
24418 Shuttle Race Cap
1053d 2006 " " " Screw
NO. PLATE NAME
24419 Shuttle Race complete, Nos. 907d, 2531,

2533, 24412, 62502 and two each 391d
and 2532
12431 " « Slide
4307 772 " " " Spring
725e 1387 " " " " Screw
12431 and two 725e
1560c 783. " Regulating Thumb Nut
43944 5806 " " Lever
12398 773 " " " Hinge Pin
12329 772 " " " Spring
32574 5806 Pin
♦44141 " " " 50327c with 1560c...
43945 5806 " Spring
12149 2014 " Thread Guard
43945, 43946, 44141 and two 2102
624c 8628 " Set Screw
3094 773 " Wedge
690e 782 " Screw....
12408 770 Lever
775b 782 " " " Cap Screw
12166 773 " Hinge Pin
12409 770 " Link
11204 770 " Hinge Pin...
435u 5806 " " " " " Set
Screw
12166, 12408 and 12409
7336 772 " " " Regulator
11204, 12404, 12410 and 43997
and 43979
Note: Two No. 12412 arc sent with this machine unless
NO. PLATE NAME
20315 Throat Plate, large ncedle^hole, for 20106

and 44253
and 44253
19366 1313 Vibrating Presser Bar
19367 1313 " " " Cap
199d 1312 " " " " Screw for 19366
219f 774 " " " « " " 19367
19368 1313 " " " Cushion (rawhide)
19369 ' 1313 Vibrating Presser Bar Spring
335d 1313 " " " " Screw
19370 1312 " " Foot for 12370 and 43979
19374 1313 " " " " 12369 and 12457
19376 1313 " " " " 20106
217d 1312 « " " Screw
power table

in SINGER Machines
are marked with the
Company's Trade Mark "SIMAN CO.**

"FOR SINGER /AACHINES"
MACHINE No. 31-20

FOR CLOTH. THROAT PLATE FLUSH WITH BED. DROP FEED.
•12355 Arm with 11104

12453 773 " Oil Tube for intermediate hearing...
12454 773 " '* " with 52046 for oiling 12409
11119 773
« <1 « u u n u 12408
24131 2014 " " " " " " " 20283
854k 783 " " (front)
12427 766 " Shaft
•44122 " " 12427 with 20188, 20283 and
24036
*44189 Arm Shaft 44122 with 20197
•11104 " " Bushing (front)
448c 783 " " " "Set
Screw
NO. PLATB NAME

12480 767 " Side Cap
219d 774 " « " Screw
12193 2004 " " Cover
286d 783 « « « Thumb Screw
11241 2003 " " " Washer (cloth)
2135 2000 Balance Wheel (stand) heavy rim, 2J^ in.
pulley for 3022
pulley for 3022
♦12360 Bed
248a 2011 " Stop Screw...
2020 2003 « Washer
4933 2003 " " " " " 3023
with two 462c
462c 773
« " « « « Set
Screw
3022J Clamp Stop Motion complete, Nos. 248a,
256j, 2020 and 4933
two 896e:
896b 773 " " " " Screw
908c 773 " Hinge Screw
1619b 773 " " " " " Nut
20057 Face Plate
12150 773 " " " " " 44181 with
12152
2827 773 *' " " " (upper) with
8505
20057
IOOd 782 Face Plate Screw
12368 767 Feed Bar
NO. PLATE NAME

313c 783 Feed Bar Screw Centre
56813 " " " " 313c with 1519j .
1519J 783 " " " " Nut
1518J 783 " " " " " Nut.
44252 5813 " Dog, for cloth, 12 teeth (12 teeth to
the inch)
44253 5813 Feed Dog, for cloth, 16 teeth (16 teeth to

the inch)
the inch)
the inch)
the inch)
the inch)
20348 777 Feed Dog, for chiffon, 22 teeth (36 teeth to
the inch)
the inch)
20119 1259 Feed Dog, for heavy work on duck, over
alls, etc., 18 teeth (16 teeth to the inch)
20158 1262 Feed Dog, for shirt work, 17 teeth (16
teeth to the inch)
20151 1262 Feed Dog, for shirt work, beveled for hem-
mer, 13 teeth (14 teeth to the inch)
20147 1260 Feed Dog, for shirt work, 12 teeth (14 teeth
to the inch)
to the inch)
to the inch)
44136 1381 Feed Dog, for tailor work, 15 teeth (16
teeth to the inch)
NO. PLATE NANB
to the inch)
to the inch)
446c 783 " " " " " Set Screw
24036 2020 " " " " " Sleeve...
375c 782 " " " Hinge Screw....
1518J 783 « « " « " Nut
•43993 Feed Forked Connection complete, Nos.
818d, 3033, 3039, 20284 and two each
375c and 1518j
12376 and 44125
and 1813
Screw
43976 5804 Feed Iîfting Rock Shaft Crank Connect
•43977 Feed Lifting Rock Shaft Crank Connect
ing Rod Cap
966e 5806 Feed Lifting Rock Shaft Crank Connect
ing Rod Cap Screw
375c 782 FeedLifting ^ck Shaft Crank Connect
ing Rod Hinge Screw
1518J 783 Feed Lifting Rock Shaft Crank Connect
Stud
307c 783 Feed Lifting Rock Shaft Screw Centre
56814 u u u u « « 307c
with 1513J
1513J 783 Feed Lifting Rock Shaft Screw Centre Nut
29633 5736 " " " Crank with 157j
157j 782 " " " " Clamping Screw..
and 29633
NO. PLATB NAMB

56814 Feed Rock Shaft Screw Centre 307c with
1513J
12381 767 Needle Bar (hoUow)
*12382 770 " " Connecting Link with 794b. ..
43997 " " " " 12382 with
12384
Screw
•12383 Needle Bar Connecting Stud
1904 770 " " " " RoUer(roUer
only)
Nos. 453c, 1904 and 12383
858c 783 " " " Set Screw
936b 773 " " Screw Bushing
233d 782 « " « " Screw
4303 773 « Clamp with 808p
808p 782 « " Screw
•24104 2001 Oscillating Rock Shaft
4784, 12388 and 24104
448c 783 " " " " "SetScrew
4784 1353 « " " Oil Pad
12389 766 " Shaft
19496 " " Crank for 19447
44134 " « " " 44135
2049 773 " " " Pin
457c 783 " " « SetScrewforl9447
453c 783 " " " " " " 44135
19448 2011 « " « SUde Block
226d 1371 " " " " "Cap
Screw
Screw Washer
Stud
1518J 783 Oscillating Shaft Crank Slide Block Screw
Stud Nut
plete, Nos. 226d, 988c, 12424 and 19448
NO. PLATE NAME

467c, 1518J, 19449 and 19496
1518J, 19449, 44134 and two 453c
20059 5736 " " Guide Bracket with 453c....
453c 783 " " « " Set Screw.. ..
2062 771 " " Lifter
689c 782 « " " Screw
1520J 783 " " " " Nut
Bracket
20023 2004 " " " (heavy) .063 wire
11170 771 " " " Washer
12143 780 « Foot for 12369, 12457 and 20106
another Presser Foot is specihed on order
12335 1308 Presser Foot (narrow) for 12369,12457 and

20106
12258 1308 Presser Foot (wide) for 12369, 12457 and
20106
12259 780 " " " 12425
12144 780 " " "20117,20138,20147,20151,
20158 and 20162
12260 780 Presser Foot for 12450,20147 and 20348...
12474 1308 " " " 20138 and 20162
20342 781 " " " 12450 and 20348
20343 781 " " with guide on bottom to the
right of n^fedle hole, for 12369, 12450,
12457 and 20348
12261 1308 " " " 12481 and 43978
12348 5837 " " " outside stays and strips
12311 5837 " " " shirt work
12467 781 " " " umbrella work
62527 5806 " " Hinge Pin
24544 " " Plate
24982 " " Shank
26231 2014 " " Spring
NO. PLATE NAME
24983 781 Fresser Foot (spring hinged) complete, for

12425 and 20119, Nos. 24544, 24982,
26231 and 62527
7298 2014 Fresser Foot Hinge Fin
19334 " " Plate
19335 " " Shank
19336 1308 Fresser Foot (hinged) complete, for 12370
and 43979, Nos. 7298, 19334 and 19335
20268 " " Plate
20269 " « Shank
20270 1308 Fresser Foot (hinged) complete for 12369,
12457 and 20106, Nos. 7298, 20268 and
20269
20310 " Plate
19223 " Shank
20311 781 Fresser Foot (hinged) complete for 20117,
20138, 20147, 20151, 20158 and 20162,
Nos. 19223, 20310 and 62527
20344 " Plate
20345 " Shank
26231 2014 " " Spring
20346 781 Fresser Foot (spring hinged) complete for
20117, 20138, 20147, 20151, 20158 and
20162, Nos. 20344, 20345, 26231 and
62527
190d 782 Fresser Foot Screw
20649 5737 " " Case Latch
2973 5737 « " " " Lever
2974 5737 " « " « " Fulcrum
Fin
592e 5737 " Stop Screw...
2974 and 20649
« « « « «
2523 5737
24323 2046 « " " " Plate
391d 1366 " " « « " Screw
592e, 2523, 2975, 20650, 20654 and
20755
NO. PLATB NAME

691p 6737 " Tension Regulating Screw
20664 6737 " " Spring
20768 6737 Shuttle, IH ill' diam., Nos. 19131, 20766
and 20767
19406 2012 Shuttle Driver with two 1266c
2049 773 « « Pin
1266c 6806 " " Set Screw
2419 2006 " Race Back
2633 767 " " " Spring
907d 782 " " " " Screw
24324 " " Body
24998 « 24324 with 24009 and
two 1063d
1063d 2006 " " " Screw
24326 2046 Shuttle Race complete, Nos. 907d, 2419,
2633, 24323, 24998 and two each 391d
and 2632
12431 " SUde
4307 772 " " " Spring
726b 1387 " " " " Screw
12431 and two 726e
226p 6736 " " " Adjusting Screw..
43944 6806 " " Lever
12398 773 " " " Hinge Pin
12329 772 « " " Spring
32674 6806 « « Pin
44141 " " " 60327c with 1660c..
43946 6806 " Spring
32674,43946,43946,44141 and two 2102
624c 8628 " " Set Screw
3094 773 " " " Wedge
690b 782 " " " " Screw...
12408 770 " " Lever
776e 782 " " " Cap Screw
NO. PLATE NAME
12166 773 Thread Take-up Lever Hinge Pin

12409 770 « " " Link
11204 770 " " " « Hinge Pin
435c 6806 " " " " " "
Set Screw
12166, 12408 and 12409
7336 772 " " « Regulator
448c 783 " " " " Set Screw
•43990 Thread Take-up complete, Nos. 775e,
11204,12404,12410 and 43997
and 44253
another Throat Plate is specified on order

and 44253
and 43979
12466 " " " « « " 12425
and 20348
and 20348
20120 1259 " " large oblong needle hole,
for 20119
20187 Throat Plate, small oblong needle hole,
for 20119
and 20162
and 20162
and 44144
19416 Throat Plate, small needle hole, for 20151
and 44144
and 44156
NO. PLATE NAME

and 44156
19412 1260 Throat Plate, laiê needle hole, for 20147
and 44177
and 44177
and 43978
and 43978
691f 782 " " Screw
44212 5844 Drip Pan with four 1 in. wire nails

in SINGER Machines
are marked with the

are NOT SINGER made needles. 2
44

FOR
MACHINE No. 31-22

FOR CLOAKS AND OTHER HEAVY CLOTH WORK. THROAT
PUTE FLUSH WITH BED. DROP FEED, HIGH LIFT
PRESSED. BOBBIN No. 19131.
NO. PLATE NAME
*12355 Arm with 11104
11119 773 " " " with52045, foroiling 12408
12454 773 " " " « " « " 12409
24131 2014 " " " " " " " 20283
52045 8628 " " " Packing (braided cotton)
854e 783 " " (front)
12427 766 « Shaft...
•44122 " « 12427 with 20188, 20283 and
24036.
•44189 Arm Shaft 44122 with 20197
•11104 " " Bushing (front)
448c 783 " " " « " Set
Screw
12480 767 " Side Cap
219d 774 " « « Screw
12193 2004 « « Cover
12403 772 " SpoolPin and Thread Eyelet
11241 2003 « " " Washer (cloth)
pulley with two 448c.
4370 2000 BalanceWheel (stand) heavy rim, 2^ in.
pulley, with two 448c
2135 2000 BalanceWheel (stand) heavy rim, 2J^ in.
pulley, for 3022
pulley, for 3022
•12360 Bed
248a 2011 " " " " Stop Screw...
2020 2003 " " " « Washer
NO. PLATB NAME

♦3023 Clamp Stop Motion Flanged Bushing—
4933 2003 " " " " " 3023
with two 462c
462c 773 " " " " " Set
Screw
256j, 2020 and 4933
two S96b
896b 773 " " " " Screw
1619e 773 " " " " " Nut
20057 Face Plate
12150 773 " " " " "44181
with 12152 •
2827 773 " " " " (upper) with
8505
20057
12368 767 Feed Bar
56813 " " " " 313c with 1519J.
1519J 783 " " " " Nut
1518J 783 " " " " " Nut.
Note: No. 44252 is sent with this machine, unless
44136 1381 " " for tailor work, 15 teeth (16
teeth to the inch)
208e 782 Feed Dog Screw
446c 783 " " " " " Set Screw
24036 2020 " " " " " Sleeve...
375c 782 " " " Hinge Screw....
NO. PLATE NAME
1518j 783 Feed Forked Connection Hinge Screw Nut

818d, 3033, 3039, 20284 and two each
375c and 1518J
12376 and 44125
and 1813
Screw
43976 5804 Feed LiftingRockShaft Crank Connecting
Rod with 43977 and two 966e
*43977 FeedLiftingRockShaftCrankConnecting
Rod Cap
966b 5806 FeedLiftingRockShaft Crank Connecting
Rod Cap Screw
375c 782 Feed LiftingRockShaft Crank Connecting
Rod Hinge Screw
1518j 783 Feed Lifting RockShaft Crank Connecting
Rod Hinge Screw Nut:
1813 783 Feed Lifting Rock Shaft Crank Roller
and Stud
56814 " " " « " " 307c
with 1513J
Idl3j 783 Feed Lifting Rock Shaft Screw Centre Nut
1128E 2009 " " Hinge Screw
29633 5736 " " " Crank with 157j
and 29633
56814 " « " " « 307c with
1513J
1513J 783 Feed Rock Shaft Screw Centre Nut
19229 2004 Needle Bar (hollow) for high lift
*12382 770 " " Connecting Link with 794e...
43997 " " " " 12382 with
12384
Screw
NO. PLATB NAME

1904 770
Needle Bar Connecting Stud Roller (roller
only)
Nos. 453c, 1904 and 12383
858c 783 " " " Set Screw
24101 " Clamp Body
808f 782 " " Screw
24102 2011 " " Thread Guard
651n 2011 " " " " Screw
24103 ' 2011 Needle Clamp (high lift) complete, Nos.
651d, 808p, 24101 and 24102
4784, 12388 and 24104
448c 783 " " " " " Set Screw
4784 1353 « " Oil Pad
12389 766 Shaft
19496 " " Crank for 19447
44134 " " " " 44135
2049 773 « " Pin
457c 783 " " " SetScrew for19447
453c 783 " " " " " " 44135
19448 2011 « " Slide Block
226d 1371 " " " " CapScrew
U U « u 14 tf <4
12424 773
Washer
Stud
Stud Nut
plete, Nos. 226d, 988c, 12424 and 19448
457c, 1518J, 19449 and 19496
1518J, 19449, 44134 and two 453c
453c 783 " " " " SetScrew....
5990 2011 " " Lifter
689c 782 " " " Screw
1520J 783 " " " " Nut
NO. ]PLATE name
12327 770 Presser Bar Lifting and Releasing Lever

Bracket
11167 Presser Bar Spring (light) .051 wire
767
20023 2004 " " " (heavy) .063 wire .,.,
11170 771 " " " Washer
12143 780 " Foot for 12369 and 12457
12335 1308 Presser Foot (narrow) for 12369 and 12457
12258 1308 " " (wide) for 12369 and 12457..
12142 780 " for 12370
20458 780 " " 44136
7298 2014 " Hinge Pin
20268 " Plate
20269 " Shank
20270 1308 Presser Foot (hinged) complete for 12369
and 12457, Nos. 7298, 20268 and 20269
19334 " Plate
19335 " Shank
19336 13C8 Presser Foot (hinged) complete for 12370
and 44136, Nos. 7298, 19334 and 19335
igoo 782 Presser Foot Screw
688J 783 Pressure Regulating Thumb Screw
20649 2012 " " Case Latch
2973 771 " " " " Lever
2974 771 " Fulcrum
Pin
592e 782 " Stop Screw..
2974 and 20649
2523 771 " Rivet
24323 2046 « Plate
391d 1366 " Screw
592e, 2523, 2975, 20650, 20654 and
20755
20654 2012 " " Spring
NO. PLATE NAl^

20758 5737 Shuttle, IJi in. diam., Nos. 19131, 20756
and 20757
*19406 2012 Shuttle Driver with two 1266c
2049 773 " « Pin
1266c 5806 " " Set Screw
2419 2006 " Race Back
2533 767 " " " Spring
907d 782 " " " " Screw
24324 " " Body
24998 « " " 24324 with 24009 and
two 1053d
1053d 2006 " " " Screw
2533, 24323, 24998 and two each 391d
and 2532
12431 " " SUde
4307 772 " " " Spring
725b 1387 " " " " Screw
12431 and two 725e
225p 5736 " " " Adjusting Screw
43980 5837 " " Lever
12398 773 " " " Hinge Pin
12329 772 " " " Spring
32574 6806 " " Pin
44141 " " " 50327c with 1560c...
43945 5806 « Spring
32574,43945,46946,44141 and two 2102
52454 5842 Thread Retainer.
624c 8628 " " Set Screw
3094 773 " " " Wedge
690fi- 782 " " " " Screw....
12408 770 " « Lever
77Se 782 " " " Cap Screw
12166 773 " " " Hinge Pin
12409 770 « " " Link
11204 770 " " " " Hinge Pin
NO. PLATE NAME

435c 5806 Thread Take-up Lever Link Hinge Pin
Set Screw
12166, 12408 and 12409
7336 772 « « " Regulator
448c 783 " " " « Set Screw
•43991 Thread Take-up complete, Nos. 775b,
11204, 12410, 43947 and 43997
Note: Two No. 44256 are sent with this machine,
unless other Throat Plates are specified on order
44137 1381 " " " " " " 44136
691p 782 " " Screw
44212 5844 Drip Pan, with four 1 in. wire nails, for
power table

in SINGER Machines
are marked with the
Company's Trade Mark "SIMANCO**"

MACHINE No. 31-24
FOR SHADE WORK, SEAMING AND FELLING FABRICS, ETC.
HAS RECIPROCATING SLIDE ABOVE THE WORK UNDER
THE PRESSER FOOT. DROP FEED. BOBBIN No. 19131.
NO. PL.4TE NAME

*20236 Arm with 11104
11119 773 " " " with 52045, for oiling 12408
12454 773 " " " " " " " 12409
24131 2014 " " " " " " " 20283
52045 8628 " " " Packing (braided cotton)
854e 783 " " (front)
12427 766 " Shaft
•44122 " " 12427 with 20188, 20283 and
24036
•44189 Arm Shaft 44122 with 20197
*11104 " " Bushing (front)
12357 767 " " Flanged Bushing (back)....
448c 783 " " " " " Set
Screw
NO. PLATE NAME

12480 767 « Side Cap
219d 774 *' " " Screw
12193 2004 " " Cover
11241 2003 " " Washer (cloth)
2135 2000 Balance Wheel (stand) heavy rim, 2\^ in.
pulley, for 3022
pulley, for 3022
•20237 Bed
248a 2011 " Stop Screw...
2020 2003 " " " " Washer
4933 2003 " " " " « 3023
with two 462c
462c 773 " " " " " Set
Screw
256j, 2020 and 4933
two 896b
896b 773 " " Screw
908c 773 " Hinge Screw
« (< « « U
1619E 773
20057 Face Plate
12150 773 " " " " " 44181
with 12152
2827 773 " " " " (upper) with
8505
20057
286d 783 « " Thumb Screw
12368 767 Feed Bar
NO. PLATE NAME

313c 783 Feed Bar Screw Centre
56813 " " " " 313c with 1519J..
1519J 783 " " " " Nut
1518J 783 " " " " " Nut.
for shirt work, beveled for hemmer
for shirt work, beveled for hemmer
446c 783 " " " " " Set Screw
24036 2020 " " " " " Sleeve....
375c 782 " " " Hinge Screw....
1518J 783 " " " " " Nut
♦43993 Feed Forked Connection complete, Nos.
818d, 3033, 3039, 20284 and two each
375c and 1518j
12376 and 44125
and 1813
Screw
♦43977 Feed Lifting Rock Shaft Crank Connect
ing Rod Cap
966b 5806 Feed Lifting Rock Shaft Crank Connect
ing Rod Cap Screw
375c 782 Feed Lifting l^ck Shaft Crank Connect
ing Rod Hinge Screw
and Stud
307c 783 Feed Lifting Rook Shaft Screw Centre
50814 « " " " " " 307c
with 1513j
NO. PLATE NAME

1128e 2009 Feed Regulator Hinge Screw
818d 783 Thumb Screw
20238 2000 " Rock Shaft
29633 5736 " " " Crank with 157j
157j 782 " Clamping Screw
20334 Feed Rock Shaft complete, Nos. 20238,
20247 and 29633
56814 " 307c with
1513J
19229 2004 Needle Bar (hollow) for high Uft
*12382 770 " " Connecting Link with 794e. .
43997 " " " 12382 with
12384
Screw
1904 770 " Roller (roller
only)
Nos. 453c, 1904 and 12383
24101 " Clamp Body
808f 782 " Screw
651d 2011 " Screw
24103 2011 Needle Clamp (high lift) complete, Nos.
651d, 808f, 24101 and 24102
4784, 12388 and 24104
4784 1353 " « " OUPad
12389 766 Shaft
19496 " " Crank for 19447
44134 " " " 44135
2049 773 " « Pin
457c 783 " " " SetScrewforl9447
453c 783 " " " " " " 44135
19448 2011 " " " SUde Block
NO. PLATE NAME

226d 1371 Oscillating Shaft Crank Slide Block Cap
Screw
Screw Washer
Stud
Stud Nut
plete, Nos. 226d, 988c, 12424 and 19448
457c, 1518J, 19449 and 19496
1518J, 19449, 44134 and two 453c
453c 783 " " " " Set Screw
20240 2019 " " Lifter
689c 782 " " " Screw
1520J 783 " " " " Nut
Bracket
another Spring is specifiedon order
20023 2004 " " (heavy) .063 wire
11170 771 " " Washer
20241 Foot Body
20242 2019 " Roller
131d 2019 " " Screw
1660J 783 " Nut
20243 2019 Presser Foot (roller) complete, Nos. 131d,
1550J, 20241 and 20242
20244 2019 Reciprocating Spring Presser Blade
20347 2048 " " " " (slotted)
20245 2019 '< " " " Holder
4i u it it it
1099P 2019
Hinge Screw
233d 782 Reciprocating SpringPresserBlade Screw
<( « « «< Spring
9804 2019
(( (/ i( (( «
20246 2019
Bracket
NO. PL.\TE NAME
7483 2019 Reciprocating Spring Presser Blade Spring

Hook
20247 2020 Reciprocating Spring Presser Regulator
Crank with 1518j, 1942 and two 190d ..
190d 782 Reciprocating Spring Presser Regulator
Crank Clamping Screw
Crank Roller (roller only)
Crank Roller Cap Screw
Crank Roller Cap Screw Washer
Crank Roller and Screw Stud with 229u,
1904 and 12424
1518j 783 Reciprocating Spring Presser Regulator
Crank Roller and Screw Stud Nut
20248 2000 Reciprocating Spring Presser Shaft
20249 2020 " " " " Bracket
(back)
134d 2019 ReciprocatingSpring Presser Shaft Bracket
(back) Screw
20250 2020 Reciprocating Spring PresserShaft Bracket
(front)
190u 782 ReciprocatingSpring Presser Shaft Bracket
(front) Screw
20251 2019 Reciprocating Spring Presser Shaft Collar
with 456c
456c 773 Reciprocating Spring Presser Shaft Colbir
Set Screw
20254 2020 Reciprocating Spring Presser Shaft Crank
(back) with 191f
(back) Pin
191f 2019 Reciprocating Spring Presser Shaft Crank
(back) Set Screw
(front) with 7483 and two 453c
20253 ; Reciprocating Spring Presser Shaft Crank
(front) complete, No 1099p, 9804,
20244 to 20246, 20252 and two 233d. ..
453c 783 Reciprocating Spring Presser Shaft Crank
(front) Set Screw
20649 2012 « « Case Latch
2973 771 " " « « Lever
NO. PLATE NAME
2974 771 Shuttle Bobbin Cose Latch Lever Fulcrum

Pin
692b 782 " " " " Stop Screw...
2974 and 20649
2523 771 " " " " " Rivet
24323 2046 " " " " Plate
391d 1366 " " " " " Screw
20756 5737 Shuttle Bobbin Case complete, No.s. 591f,
592e, 2523, 2975, 20850, 20654 and
20755
20654 2012 " " Spring
and 20757
19400 2012 Shuttle Driver with two 1266c
2049 773 " " Pin
1266c 5806 " " Set Screw
2419 2006 " Race Back
2533 767 " " " Spring
907d 782 " " " " Screw
24324 " " Body
24998 " " " 24324 with 24009 and
two 1053i>
1053d 2006 " " " S;rew
2533, 24323, 24998 and two each 39Id
and 2532
145d 782 Shuttle Rjiee Screw
124:31 " " Slide
4307 772 " " " Spring
725e 1387 " " " " Screw
12431 and two 725e
225f 5736 " " " Adjasting Screw
43944 5806 " " Lever
12398 773 " " " Hinge Pin
12329 772 " " " Spring
NO. PLATE NAME
32574 6806 Tension Releasing Pin

44141 " " " 50327c with 1560c...
43945 5806 " Spring
32574,43945,43946,44141 and two 2102
624c 8628 " " Set Screw
12404 770 « Take-up Crank
3094 773 " " " Wedge
690e 782 " " " « Screw....
12408 770 « « Lever
775b 782 " " " Cap Screw
12166 773 " " " Hinge Pin
12409 770 " " " Link
11204 770 " " " " Hinge Pin...
435c 5806 " " " " " " Set
Screw
12166, 12408 and 12409
7336 772 " " " Regulator
448c 783 " " « " Set Screw
*43990 Thread Take-up complete, Nos. 775b,
11204, 12404, 12410 and 43997
and 20162
Note: Two No.1940J are sent with this machine, unless
and 20162
691p 782 Throat Plate Screw
power table
LIST OF PARTS COIViRLETE
MACHINE No. 31-27

FOR FULL OR SCANT RUFFLES ON THICK OR THIN FABRICS.
FOR APRONS, DRESSES, INFANTS' GARMENTS. SKIRTS,
ETC. POSITIVE RUFFLING MECHANISM, DROP FEED.
BOBBIN No. 2996.
NO. PLATE NAME
*20312 Arm with 11104

11119 773 " " " with 52045, for oilingU2408
and 24207
12454 773 Ann Oil Tube with 52045, for oiling 12409
24131 2014 " " " " " " " 20283
854e 783 " " (front)
20332 2049 " Shaft
•44130 " " 20332 with 20188, 20283, 24036,
24207 and 24208
*44207 Arm Shaft 44130 with 20197
NO. PLATE NAME
12357 767 Arm Shaft Flanged Bushing (back)

448c 783 " " " " « Set
Screw
144d 782 Ann Shaft Screw
12480 767 " Side Cap
219d 774 " " " Screw
12193 2004 " " Cover
11241 2003 " " Washer (cloth)
12358 Balance WTieel (power) light rim, 2^ in.
2000
2135 2000 Balance Wheel (stand) heavy rim, 2}^ in.
pulley, for 3022
pulley, for 3022
•12360 Bed
248a 2011 " « " " Stop Screw...
2020 2003 " " " " Washer
•3023 " " " Flanged Bushing....
4933 2003 " " " " " 3023
with two 462c
462c 773 " " " " « Set
Screw
256j, 2020 and 4933
two 896b
•20198 Crank Connecting Rod Cap
896e 773 " " " " Screw
1619e 773 " " " " " Nut
20057 Face Plate
12150 773 " " " " "44181
with 12152
2827 773 " " « " (upper) with
8505
8505 773 Face Plate Thread Guard (upper) Rivet..
and 20057
PARTS FOR MACHINE No, 31-27 61
NO. PLATE NAME

12368 767 Feed Bar
66813 " " " " 313c with 1519J..
isigj 783 " " " " Nut
« « « « «
1518J 783
24303 1344 " Dog, 6 teeth (14 teeth to the inch)...
208e 782 " " Screw
446c 783 " " " " " Set Screw
24036 2020 " " " " " Sleeve.,..
1518J 783 " " " " " Nut
•43993 Feed Forked Connection complete, Nos.
818d, 3033, 3039, 20284 and two each
375c and 1518J
12376 and 44126
and 1813
Screw
ing Rod with 43977 and two 966e
ing Rod Cap
ing Rod Cap Screw
ing Rod Hinge Screw
Stud
307c 783 Feed Lifting Rock Shaft Screw Centre...
56814 " " " " " " 307c
with 1513j
1128e 2009 " " Hinge Screw
818o 783 " " Thumb Screw
NO. PLATE NAME
29633 5736 Feed Rock Shaft Crank with 157j

157j 782 " « « " Clamping Screw
and 29633
66814 " " " « " 307c with
1513J
•12382 770 " " Connecting Link with 794b. ..
43997 " " « " 12382 with
12384
Screw
1904 770 " " " « RoUer (roller
only)
Nos. 453c, 1904 and 12383
858c 783 " " " Set Screw
4302 773 " Thread Guide
233d 782 " Screw
4303 773 " Clamp with 808p
808f 782 " " Screw
4784, 12388 and 24104
12388 767 Oscillating RockShaft HingePin
448c 783 " " « " « Set Screw
4784 1353 " " " Oil Pad
12389 766 " Shaft
19496 " " Crank for 19447
44134 " " " " 44135
2049 773 " « " Pin .."!!!!
457c 783 " " " SetScrewforl9447
453c 783 " " " " " " 44136
19448 2011 « " " Slide Block
226d 1371 " " " " " Cap
Screw
Screw Washer
Stud
NO. PLATE NAME

Stud Nut
19449 2011
Oscillating Shaft Crank Slide Block com
plete, Nos. 226d, 988c, 12424 and 19448
457c, 1518J, 19449 and 19496
1518.1,19449, 44134 and two 453c
453c 783 " " " " Set Screw....
2062 771 " " Lifter
689c 782 " " " Screw
1520.1 783 " " " " Nut
Bracket
Note; No. 11167 is sent with this Machine, unless
20023 2004 " " " (heavy) .063 wire
11170 771 " " " Washer
24304 1344 " Foot
190d 782 " « Screw
688.1 783 Pressure Regulating Thumb Screw
26888 1344 Ruffling Arm (lower)
26889 1344 " " (upper) with 190d and 219p
207f 1344 « " Adjusting Screw
2291 1344 " " " " Washer...
190d 782 " " Clamping Screw
219f 774 " " Set Screw
26890 1344 Ruffling Arm (adjustable) Nos. 2291,
26888, 26889 and two 207p
28845 Ruffling Arm (adjustable) complete, Nos.
226d, 1550h, 24203 to 24206, 26890 and
two 665d
24199 1323 Ruffling Arm Shaft
24201 1324 « " " Bracket (left)
159d 1324 " " " " " Screw..
24200 1324 " " " " (right)
145i) 1324 " " " " " Screw
6533 1323 « " " Collar with 460c
460c 1323 " " " " Set Screw
24305 1344 " Blade
24203 1344 " " Holder
226d 1344 " " " Cap Screw
u PARTS FOR MACHINE No. 31-27
NO. PLATE NAME
24579 2014 RufBing Blade Holder Spring (heavy left)

24581 2014 " " " " (Ughtleft)..
24580 2014 " " " " (heavy right)
24204 1344 " " " " (light right)
24582 1344 " " " " (left stop)..
24205 1344 " " " " (right stop)
24206 1344 "" " " Stud
1550h 1344 " " " " Nut
665d 1344 " " Screw
24207 1323 " Eccentric with two 453c
24208 1323 " " Collar with 453c
463c 1323 " " " Set Screw
24219 1323 " " Connection with 24220
and two 742b
*24220 Ruffling Eccentric Connection Cap
742e 1323 " " " " Screw
24210 1324 " " " Washer....
453c 1323 " " Set Screw
24211 1323 " Regulator with 225p
225f 1323 « " Set Screw
181d 1323 " " Stop Screw
1641e 1323 " " " " Nut
1108f 1323 " " Thumb Screw
1641e 1323 " " " " Nut....
43918 5757 " Separating Blade
26092 2671 " " " Rivet
43919 5757 " " " Shank
43920 5757 Ruffling Separating Blade on Shank com
plete, Nos. 43918, 43919 and two 26092
1423d 5742 Ruffling Separating Blade Screw
62739 " " Case
15140 2013 " " " Latch
2973 771 " " " " Lever
2974 771 " " " " " Fulcrum
Pin.
592e 782 " " " " Stop Screw...
2974 and 15140
2523 771 " " " " " Rivet
24412 1361 " " " " Plate
391d 1366 " " " " " Screw
592b, 2523, 2975, 7553, 15141, 15278
and 62739
NO. PLATE NAME

15278 771 " " Spring
19292 771 Shuttle, lU iii- diam., Nos. 2996, 12393
and 62740
•12394 Shuttle Driver
12444 771 " 12394 with two 1266c
2049 773 " Pin
2531 767 Race Back
2532 772 " " Position Pin
2533 76" " " Spring
907d 782 " Screw
24413 " Body
25000 " " 24413 with 24414 and
two 1053d
1053d 2006 " " " Screw
2533, 24412, 25000 and two each 391d
and 2532
145d 782 Shutt le Race Screw
12431 " Slide
4307 772 " " Spring..
725e 1387 " " " " Screw
12431 and two 725e
225f 5736 " " " Adjusting Screw
43944 5806 " " Lever
12398 773 " Hinge Pin
12329 772 " " " Spring
32574 5806 " " Pin
44141 " " 50327c with 1560c...
43945 5806 " Spring
44118 " complete, Nos. 7336, 32572,
32574,43945,43946,44141 and two 2102
624c 8628 " " Set Screw
3094 773 " Wedge
690b 782 " Screw....
12408 770 " " Lever
NO. PLATE NAME

775e 782 Tension Take-up Lever Cap Screw
12166 773 " " " Hinge Pin
12409 770 " " " Link
11204 770 " " " " Hinge Pin...
435c 5806 " " " " " " Set
Screw
12166, 12408 and 12409
7336 772 " " " Regulator
448c 783 " " " " Set Screw
*43990 Thread Take-up complete, Nos. 775e,
11204, 12404, 12410 and 43997
24306 1344 Throat Plate for 24303
691f 782 " " Screw
power table

in SINGER Machines
are marked with the
Company's Trade Mark "SIMANCO.**"

67

FOR
MACHINE No. 31-32

FOR CLOTH. HAS REVERSIBLE DROP FEED. BOBBIN No. 2996
NO. PLATE NAME

*20313 Arm with 11104
11119 773 " " " with 52045, for oiling 12408
12454 773 " " " " " " " 12409
24131 2014 " " " " " " " 12197
854e 783 " " (front)
12427 766 " Shaft
*44124 " " 12427 with 12197 and 20188..
♦44197 « " 44124 with 20197
448c 783 " " " " " Set
Screw
12480 767 " Side Cap
219d 774 " " " Screw
12193 2004 " " Cover
11241 2003 " " " Washer (cloth)
2135 2000 Balance Wheel (stand) heavy rim, 2]/^ in.
pulley, for 3022
pulley, for 3022
*12360 Bed
248a 2011 " " " " Stop Screw...
2020 2003 " " " " Washer
4933 2003 " " " " " 3023
with two 462c ,
NO. PLATE NAME

462c 773 " " " " " Set
Screw
256j, 2020 and 4933
two 896e
S96e 773 " " " " Screw
908c 773 " " " Hinge Screw....
1619e 773 " " " « " Nut
20057 Face Plate
44181 " " Thread Guard (lower)
12150 773 " " " " "44181
with 12152
2827 773 " " " " (upper) with
8505
and 20057
12368 767 Feed Bar
56813 " " " " 313c with 1519J..
1519J 783 " " " " Nut
12197 2001 " Cam and Feed Lifting Eccentric
with 446c
446c 783 Feed Cam and Feed Lifting Eccentric Set
Screw
3033 770 Feed Connecting Link
1518J 783 " " " " " Nut..
Notr: No. 20304 is sent with this machine, unless
208e 782 " " Screw
3033, 12332, 44003 and two each 375c
and 1518j
375c 782 Feed Forked Connection Hinge Screw
1518J 783 " " « " " Nut
44125 5804 " Lifting Rock Shaft
NO. PLATE NAME

12376 and 44125
and 1813
Screw
ing Rod Cap
ing Rod Cap Screw
ing Rod Hinge Screw
Stud
307c 783 Feed Lifting Rock Shaft Crank Screw
Centre
56814 Feed Lifting Rock Shaft Crank Screw
Centre 307c with 1513J
1513J 783 Feed Lifting Rock Shaft Crank Screw
Centre Nut
834d 5740 Feed Regulating Thumb Screw
12332 5740 " Regulator and Reverser
1128E 1366 " " " " Hinge Screw
12333 5740 " " Handle
12323 5740 " " " Friction Spring..
835d 5740 " " " Screw
29633 5736 " " Crank with 157j
29633
56814 " " " " " 307c with
1513J
♦12382 770 " " Connecting Link with 794e ..
43997 " " " " 12382 with
12384
Screw
NO. PLATE NAME
1904 770 Needle Bar Connecting Stud Roller (roller

only)
453c 783 Needle Bar Connecting Stud Set Screw.
Nos. 453c, 1904 and 12383
233d 782 " Screw
4303 773 " Clamp with 808p
808f 782 " " Screw
♦24104 2001 Oscillating Rock Shaft
4784, 12388 and 24104
4784 1353 " " Oil Pad
12389 766 Shaft
19496 " " Crank for 19447
44134 " " " " 44135
2049 773 " Pin
457c 783 " " " Set Screw for 19447
453c 783 " " " " " " 44135
19448 2011 " Slide Block
226d 1371 Cap
Screw
Screw Washer
Stud
Stud Nut
plete, Nos. 226d, 988c, 12424 and 19448
457c, 15181, 19449 and 19496
1518.1, 19449, 44134 and two 453c
453c 783 " Set Screw....
2062 771 " Lifter
689c 782 " Screw
1520J 783 " " " " Nut
NO. PLATE NAME

Bracket
another Spring is S])ecified on order
20023 2004 " " " (heavy) .063 wire
11170 771 " " " Washer
12144 780 " Foot for 20304


20038 780 " " " 20303
190[) 782 " " Screw
6881 783 Pressure Regulating Thumb Screw
62739 " " Case
15140 2013 " " " Latch
2973 771 " " " " Lever
2974 771 " " " " " Fulcrum
Pin
592e 782 " " " " Stop Screw...
2974 and 15140
7553 771 Shuttle Bol)bin Case Position Finger
2523 771 " " " " " Rivet
24412 1361 " " " " Plate
391D 1366 " " " " " Screw
592f, 2523, 2975, 7553, 15141, 15278
and 62739
15278 771 " " Spring
19292 771 Shuttle, l\l in. diam., Nos. 2996, 12393
and 62740
12444- 771 " " 12394 with two 126()r
2049 773 " " Pin
1266c 5806 " " Set Screw
2533 767 " " " Spring
907d 782 " " " " Screw
NO. PLATE NAME
24413 Shuttle Race Body

25000 " " " 24413 with 24414 and
two 1053d •

1053d 2006 " " " Screw
2533, 24412, 25000 and two each 391d
and 2532
145o 782 Shuttle Race Screw
12431 " " SUde
4307 772 " " " Spring
725b 1387 " " " " Screw
12431 and two 725e
43944 5806 " " Lever
12398 773 " " Hinge Pin
12329 772 " Spring
32574 5806 Pin
44141 " " " 50327c with 1560c...
43945 5806 " Spring
32574,43945,44141,49946 and two 2102
624c 8628 " " Set Screw
3094 773 " " " Wedge
690e 782 « Screw....
12408 770 " Lever
775b 782 " Cap Screw
12166 773 " Hinge Pin
12409 770 " Link
11204 770 " Hinge Pin...
435c 5806 " " " " « " Set
Screw
12166,12408 and 12409
448c 783 Set Screw
11204, 12404, 12410 and 43997
MO. PLATE MAMB

Note: Two No. 12414 are sent with this machine, unless
44255 5813 " " " " " " 44254
44256 « « large needle hole, for 44254
69lP 782 « « Screw
power table

in SINGER Machines
are marked with the
Company's Trade Mark "SIMAN CO.**

"FOR SINGER AÂCHINES"
74

FOR
MACHINE No. 31-34

FOR HORSE BLANKETS. BURLAP AND OTHER WORK. MAKES
STITCH UP TO Vs INCH LONG. DROP FEED.
NO. PLATE NAME
*12355 Arm with 11104

11119 773 " " " with 52045, for oiling 12408
12454 773 " " " " " " " 12409
24131 2014 " " " " " " " 12428
854e 783 " " (front)
12427 766 " Shaft
*44217 " « 12427 with 12428, 20188 and
20197
*11104 Arm Shaft Bushing (front)
448c 783 " " " " "Set
Screw
12480 767 " Side Cap
219d 774 " " " Screw
12193 2004 " " Cover
286d 783 " " " Thuml) Screw
11241 2003 " " " Washer (cloth)
12358 2000 Btilancc Wheel (power) light rim, 2i^ in.
4370 2000 Balance l\'hcel (stand) heavy rim, 2?4 in.
2135 2000 Balance Wheel (stand) heavy rim, 2'> in.
IHilley, for 3022
imlley, for 3022
44Sc 783 Balance Wheel Set Screw
*12360 Bed
256.1 2003 Clamp Stop Motion Clamp Screw
24S.\ 2011 " " " " Stop Screw...
2020 2003 " " " " Washer
*3023 " " " Flanged Bushing....
4933 2003 " " " " " 3023
with two 462c
NO. PLATE NAME

462c 773 " " " " " Set
Screw
256j, 2020 and 4933
two 896e
896e 773 " " " " Screw
1619b 773 " " " " " Nut
20057 Face Plate
*44181 . " " Thread Guard (lower)
12150 773 " " " " " 44181
with 12152
2827 773 " " " " (upper) with
8505
and 20057
44226 8629 Feed Bar
66813 " " " " 313c with 1519J
1519J 783 " " " " Nut
1518J 783 " " " " " Nut
Note : No. 43923 is sent with this machine, unless
208e 782 " " Screw
446c 783 " " " " " Set Screw
44188 " " " ' 43924 with 818d
3033, 3039 and two each 375c and 1518J
375c 782 Feed Forked Connection Hinge Screw
1518J 783 " " " " " Nut
44125 5804 " Lifting Rock Shaft
12376 and 44125
NO. PLATE NAME

and 1813
Screw
ing Rod Cap
ing Rod Cap Screw
ing Rod Hinge Screw
Stud
56814 " " " " « « 307c
with 1513j
1128e 2009 *' " Hinge Screw
12379 766 « Rock Shaft
29633 5736 " " " Crank with 157j
and 29633
56814 " « « 307c with
1513J
*12382 770 " " Connecting Link with 794e..
43997 " " " " 12382 with
12384
Screw
*12383 Needle Bar ConnectingStud
1904 770 " " " " Roller (roller
only)
Nos. 453c, 1904 and 12383
1065c 2011 " " Position Screw
NO. PLATE NAME

233d 782 " Screw
4303 773 " Clamp with 808f
808p 782 " " Screw
4784, 12388 and 24104
448c 783 " " " " Set Screw
4784 1353 " Oil Pad
12389 766 Shaft
19496 " Crank for 19447
44134 " " " 44135
2049 773 « " Pin
457c 783 " " SetScrew forl9447
453c 783 « « " » 44135
19448 2011 " SUde Block
226d 1371 " " " " Cap
Screw
Screw Washer
988c 2011 Oscillating Shaft Crank Slide Block Screw-
Stud
Stud Nut
plete, Nos. 226d, 988c, 12424 and 19448
457c, 1518J, 19449 and 19496
1518J, 19449, 44134 and two 453c... ,
453c 783 " " " " Set Screw....
2062 771 " " Lifter
689c 782 " " " Screw
1520J 783 " " " " Nut
Bracket
20023 2004 " " " (heavy) .063 wire
11170 771 " " " Washer
NO, PLATE NAME

20358 " " Plate
19335 " " Shank
20359 781 Presser Foot (hinged) complete, for ^ in.
gauge and above, for 20355, Nos. 19335,
20358 and 26276
Note: When ordering No. 20359, give width
of turned edge from seam
19334 " " Plate
19335 " " Shank
Nos. 7298, 19334 and 19335
688J 783 Pressure Regulating Thumb Screw
62739 " " Case
15140 2013 " " " Latch
2973 771 " " " " Lever
2974 771 " " " " " Fulcrum
Pin
592e 782 « " " " Stop Screw...
2974 and 15140
2523 771 " " " " " Rivet
24412 1361 " " " " Plate
3911> 1366 " " " " " Screw
62740 771 Shuttle Bobbin Case complete, Nos. 591p,
592e, 2523, 2975, 7553, 15141, 15278
and 62739
591F 782 " Tension Regulating Screw
15278 771 " " Spring
19292 771 Shuttle, 1H in. diam., Nos. 2996, 12393
and 62740
12444 771 " " 12394 with two 1266c
2049 773 " " Pin
1266c 5806 " " Set Screw
NO. PLATE NAME
2532 772 Shuttle Race Back Position Pin

2533 767 " " " Spring
907d 782 " Screw
24413 " " Body
25000 " 24413 with 24414 and
two 1053d
1053d 2006 " " " Screw
2533, 24412, 25000 and two each 391d
and 2532
12431 " Slide
4307 772 " " " Spring
725e 1387 " " " " Screw
12431 and two 725e
225f 5736 " •' " Adjusting Screw.
43944 5800 " " Lever
12398 773 " " " Hinge Pin
12329 772 " " " Spring
32574 5806 Pin
44141 " " " 50327c with 1560c..
43945 5806 " Spring
32574,43945,43940,44141 and two 2102
624c 8628 " " Set Screw
3094 773 " Wedge
690b 782 " " " " Screw....
12408 770 " " Jjcvcr
775e 782 " " " Cap Screw
12166 773 " " Hinge Pin
12409 770 " " Link
11204 770 " " " " Hinge Pin...
435c 5806 " " " " " Set
Screw
12166, 12408 and 12409
7336 772 " " " Regulator
NO. PLATE NAME

448c 783 Thread Take-up Spring Regulator Set Screw
•43990 Thread Take-up complete, Nos. 775e,
11204, 12404, 12410 and 43997
Note: Two No. 43926 are sent with this machine, unle.ss
691p 782 " " Screw
power table

in SINGER Machines
are marked with the
Company's Trade Mark "SIMANCOJ #»»»
1

81

FOR
MACHINE No. 31-35

FOR LIGHT OR HEAVY CLOTH, HAS VERTICAL TRIMMER THAT
TRIMS FROM TO M INCH FROM THE SEAM, DROP FEED.
ROBRIN NO.2996. MACHINES AREFIHED WITH H INCH
CUTTING BAR UNLESS OTHERWISE ORDERED, AND AN
EXTRA A INCH CUHING BAR AND PRESSER FOOT ARE
ALSO FURNISHED. WHEN A DIFFERENT WIDTH IS OR
DERED THE EXTRA CUHING BAR WILL BE ONE SIZE
LARGER EXCEPT WHEN K INCH IS REQUIRED.
NO. PLATE NAME
*43927 Arm with 11104

12453 773 " Oil Tube for intermediate bearing..
12454 773 " " " with 52045, for oiling 12409
11119 773 " " " « " " " 12408
and 16569
24131 2014 Arm Oil Tube with 52045 for oiling20283
854b 783 " " (front)
12427 766 " Shaft
•44123 " 12427 with 16569, 20283 and
24036
*44196 Arm Shaft 44123 with 20197
448c 783 " " " " " Set
Screw..
12193 2004 " Side Cover
11241 2003 " " " Washer (cloth)
12358 2000 Balance Wheel (power) light rim, 2Ain.
2135 2000 Balance Wheel (stand) heavy rim, 2H in.
pulley, for 3022
pulley, for 3022
NO. PLATE NAME

•12360 Bed
248a 2011 « " " " Stop Screw..
2020 2003 " « « " Washer
*3023 " " " Flanged Bushing....
4933 2003 " " " " " 3023
with two 462c
462c 773 " " " " " Set
Screw
256j, 2020 and 4933
two 896e
896b 773 " " " " Screw
908c 773 " " " Hinge Screw....
1619b 773 « " " " " Nut.
16558 Face Plate
62682 8628 " " Thread Eyelet
44181 " " " Guard (lower)
12150 773 " " " " " 44181
with 12152
12152 773 Face Plate Thread Guard (lower) Rivet.
2827 773 " « " " (upper) with
8505
and 16558
12368 767 Feed Bar
56813 " " " " 313c with 1519J.
1519J 783 " " " " Nut
1518J 783 " " " " " Nut
another Feed Dog is specified on order.
24573 1271 Feed Dog, 24 teeth (32 teeth to the inch).
208e 782 " " Screw
20283 2020 " and Feed Lifting Eccentric with
446c
NO. PLATE NAME
446o 783 Feed and Feed Lifting Eccentric Set

Screw
24036 2020 Feed and Feed Lifting Eccentric Sleeve
20284 2020 Feed Forked Connection
375c 782 " " " Hinge Screw...
1518J 783 " " " " " Nut
818d, 3033, 3039, 20284 and two each
375c and 1518J
12376 and 44125
and 1813
Screw
43976 5804
Feed Lifting Rock Shaft Crank Connect
ing Rod Cap
966b 5806 Feed Lifting Rock Shaft Crank Connect
ing Rod Cap Screw
ing Rod Hinge Screw
and Stud
60314 " « " " " « 307c
with 1513j
1513j 783 Feed Lifting Rock Shaft Screw Centre
Nut
3039 768 Feed Regulator
29633 5736 " " " Crank with 157j
and 29633
56814 " " " " " 307c with
1513J
5726 1271 Knife ;
Note: Two No. 5726 are sent with this machine.
NO. PLATE NAME
620f 782 Knife Adjusting Screw

19297 5738 " Bar with 2301
24431 5841 " Crank with 191c
1162c 1366 " " " Coupling Pin
1564d 2038 " " " " Head
2297 2038 " " " " Spring
2022 773 " « " Pin
191c 1366 " " " Set Screw
24432 Knife Bar Crank complete,Nos.1162,1564d
2297 and 24431
16563 5738 Knife Bar Driving Crank (forked)
16564 5738 " " " " Bracket
24433 Knife Bar Driving Crank Bracket com
plete, Nos. 2022,16563,16564 and 24432
647c 774 Knife Bar Driving Crank Bracket Screw
24122 1317 " " Lifting Spring
24123 1317 " " " " Case
24124 1317 " " « " Guide
*24906 " " " " " 24124 with
2523 and 24125
24125 1317 Knife Bar Lifting Spring Guide Bracket
u a it it it ti
621d 1317
Screw
2523 1317 Knife Bar Lifting Spring Guide Pin
2301 1317 " " Stop Pin
24128 Knife Bar complete, Nos. 621d, 19297,
19391, 24109, 24906 and three 335h ....
19391 1321 Knife Holder with 620f, 2291 and two
223p
24109 1321 Knife Holder Handle
335h 1317 " Screw
335h 1317 " " Screw
223p 1317 " Screw
2291 1317 " Washer
16568 5841 Needle Bar with 620f, 904f and 24391...
•12382 770 " " Connecting Link with 794e ..
43997 " 12382 with
12384
Screw
1904 770 " Roller (roUer
only
453c 783 Needle Bar Connecting Stud Set Screw.
Nos. 453c, 1904 and 12383
NO. PLATE NAME
16569 6738 Needle Bar Crank (eccentric) with 448c

and 743c
743c 1317 Needle Bar Crank Position Screw
448c 783 " " " Set Screw
620f 782 " " " « Set Screw
904f 8628 " Set Screw
4784, 12388 and 24104
448c 783 " " " " "Set Screw
4784 1353 " " " Oil Pad
12389 766 " Shaft
19496 " " Crank for 19447
44134 " " " " 44135
2049 773 " " " Pin
457c 783 " " " Set Screw for 19447
453c 783 " " " " " " 44135
19448 2011 " " " Slide Block
226d 1371 " " " " " Cap
Screw
Screw Washer
Stud
1518.r 783 Oscillating Shaft Crank Slide Block Screw
Stud Nut
plete, Nos. 226d, 988c, 12424 and 19448
457c, 1518J, 19449 and 19496
1518j, 19449, 44134 and two 453c
453c 783 " " " " Set Screw....
2062 771 " " Lifter
689c 782 " " " Screw
1520J 783 " " " " Nut
Bracket
Note: No. 11167 is sent with this machine
unless another Spring is specified on order
NO. PLATE NAME

20023 2004 " " " (heavy) .063 wire....
11170 771 " " " Washer
24722 1271 " Foot, for ^ in. to H in-gauge
19392 1271 " " " ^ in. gauge and above.
Note; No. 24722, in. gauge, and No. 19392, ^ in.
gauge, are sent with this machine unless other
Gauges are specified on order
190D 782 Presser Foot Screw
688.r 783 Pressure Regulating Thumb Screw
62739 " " Case
15140 2013 " " " Latch
2973 771 " " " " Lever
2974 771 " " " " " Fulcrum
Pin
592b 782 " " " " Stop Screw..
2974 and 15140
2523 771 " " " " " Rivet
24412 1361 " " " " Plate
391d 1366 " " " " " Screw
62740 771 Shuttle Bobbin Case complete, Nos.
591f, 592e, 2523, 2975, 7553, 15141,
15278 and 62739
15278 771 " " Spring
19292 771 Shuttle, 1H in. diam., Nos. 2996, 12393
and 62740
12444 771 " " 12394 with two 1266c....
2049 773 " " Pin
1266c 5806 " " Set Screw
2533 767 " " " Spring
907d 782 " " " " Screw
24413 " " Body
62502 " " " 24413 with 24418 and
two 1053d
1053d 2006 " " " Screw
NO. PLATE NAME
24419 Shuttle Race complete, Nos. 907d, 2531,

2533, 24412, 62502, and two each 391 d
and 2532
12431 " SUde
4307 772 " " " Spring
725e 1387 " " Screw
12431 and two 725e
1560c 783 Regulating Thumb Nut
32572 5806 Releasing Disc
43944 5806 " Lever
12398 773 " Hinge Pin
12329 772 " Spring
32574 5806 " Pin
60327c 5806 Screw Stud
44141 " 50327c with 1560c..
43945 5806 Spring
12149 2014 Thread Guard
32574, 43945, 43946, 44141 and two
2102
624c 8628 " " Set Screw
3094 773 " Wedge
690e 782 " Screw....
12408 770 " " Lever
775e 782 " " " Cap Screw
12166 773 " " Hinge Pin
12409 770 " " " Link
11204 770 " " " " Hinge Pin...
435c 5806 " " « " " " Set
Screw
12166, 12408 and 12409
7336 772 " " " Regulator
448c 783 " SetScrew
♦43990 Thread Take-up complete, Nos. 775b,
11204,12404,12410 and 43997
5729 Throat Plate Body
NO. PLATE NAME

5730 1271 Throat Plate Cutting Bar
Note . When ordering No. 5730 state required
distance of trimmed edge from seam.
Note: 5730, ^ in. gauge, is sent with this machine
unless another Gauge is specified on order.
578d 5837 Throat Plate Cutting Bar Screw
5731 1271 " " SUde
578d 5837 " " " Adjusting Screw
5732 1271 Throat Plate completeforl9103and24573,
Nos. 5729 to 5731 and three 678d
Note: When ordering No. 5732 state required
distance from trimmed edge to seam.
Note: No. 5732,3^ in. gauge, is sent with this machine
unless another Gauge is specified on order.
69If 782 Throat Plate Screw

power table

in SINGER Machines
are marked with the

89

FOR
MACHINE No. 31-37

MAKES SINGLE, DOUBLE OR TRIPLE BOX PLAITS OR RUFFLES
ACROSS STRIPS UP TO 21/4 INCHES WIDE, OR UPON THE
EDGES OF WIDE FABRICS, AND STITCHES THEM DOWN
FROM ^ TO inches FROM THE EDGES, ATTHE SAME
TIME STITCHING THEM TO ANOTHER PIECE IF DESIRED.
NO. PLATE NAME

*20490 Arm with 11104
12453 773 " Oil Tube for intermediate hearing..
11119 773 " " " with 52045, for oiling 12408
12454 773 " " " " " " " 12409
24131 2014 " " " " " " " 20283
854e 783 " " (front)
20400 5735 " Shaft
♦44169 " " 20400 with 201SS, 20283,
20426 and 24036
*44199 Arm Shaft 44169 with 20197
448c 783 " " " " " Set
Screw
12480 767 " Side Cap
219d 774 " " " Screw
12193 2004 " " Cover
11241 2003 " " " Washer (elothj
*20401 Bed
two 896e
896b 773 " " " •* Screw
1619b 773 " " " " " Nut.
NO. PLATE NAME
43890 5755 Edge Guide

212d 5755 " " Screw
20057 Face Plate
12150 773 " " " " "44181
with 12152
12152 773 Face Plate Thread (lower) Rivet
2827 773 " " " Guard (upper) with
8505 '
20058 5735 Face Plate complete, Nos. 2827, 12150,
and 20057
12368 767 Feed Bar
56813 " " « " 313cwithl519J..
1519J 783 " " " " Nut
1518.1 783 " " " " " Nut.
208e 782 " " Screw
20283 2020 " and Feed Lifting Eccentric with
446c
446c 783 Feed and Feed Lifting Eccentric Set Screw
24036 2020 " " " " " Sleeve...
375c 782 " " " Hinge Screw....
1518J 783 " " " " " Nut
818d, 3033, 3039, 20284 and two each
375c and 1518j
and 1813
Screw
12376 and 44125
*43977 Feeil Lifting Rock Shaft Crank Connect
ing Rod Cap
ing Rod Cap Screw.
NO. PLATE NAME

ing Rod Hinge Screw
Stud
66814 " " " " " " 307c
with 1513j
3039 708 Feed Regulator
1128e 2009 " *' Hinge Screw
29633 6736 " " " Crank with 167j
and 29633
56814 " " " " " 307c with
1613J
*12382 770 " " Connecting Link with 794e ..
43997 " " " " 12382 with
12384
Screw
1904 770 " " " " Roller (roller
only)
Nos. 463c, 1904 and 12383
20188 767 Needle Bar Crank with 868c and 1066c...
868c 783 " " " Set Screw
233d 782 " " " " Screw
4303 773 " Clamp with 808p
808f 782 " " Screw
4784, 12388 and 24104
448c 783 " " " " "SetScrew
NO. PLATE NAME
4784 1353 Oscillating Rock Shaft Oil Pad...

12389 766 Shaft
19496 Crank for 19447.
44134 " 44135
2049 773 " Pin
457c 783 " Set Screw for 19447
453c 783 " " " " 44135
19448 2011 " Slide Block
226d 1371 " " " Cap
Screw...
Screw Washer
Stud
Stud Nut
plete, Nos. 226d, 988c, 12424 and 19448
457c, 1518J, 19449 and 19496
44135 5806 Oscillating' Shaft Crank complete, Nos.
1518j, 19449, 44134 and two 453c
20404 5745 Plaiting Blade (lower)
208d 5745 " " " Screw
20405 5746 " (upper)
228d 5746 " " " Screw (left)
208d 5745 " (right)
20406 5745 " " Holder (lower)
212p 5745 " " " " Cap Screw
43887 5745 " Hinge Stud
1668c 5745
Nut.
8905 5745 Plaiting Blade Holder (lower) Hinge Stud
Nut Washer
20408 5745 Plaiting Blade Holder (lower) Spring
43888 5745 " Stop
<( « « « « (i
50035b 5745
Screw
1550h 5745 Plaiting Blade Holder (lower) Spring Stop
Screw Nut
20410 5746 Plaiting Blade Holder (upper)
212p 5745 " Cap Screw.
43887 5745 " " Hinge Stud
1668c 5745
Nut.
8905 5745 Plaiting Blade Holder (upper) Hinge Stud
Nut Washer
NO. PLATE NAME
20411 5746 Plaiting Blade Holder (upper) Spring....

43888 5745
<( 44
" Stop
U 44 44 44 44 44
50035E 5745
Snrew
1550h 5745 Plaiting Blade Holder (upper) Spring Stop
Screw Nut
20412 5745 Plaiting Blade Separating Spring
44
20413 5747 Cam No. 1
44 44 44
20414 5747 2
44 44 44
20415 5747 3
44 44 44
20416 5747 4
44 44 44
20417 5748 5
44 44 44
20418 5748 6
44 44 44
20419 5748 7
44 44 44
20420 5748 8.
44 44 44
20421 5749 9
44 44 44
43830 5784 10
44 44 44
43831 5784 11
44 44
8386 5746 Position Pin
44 44
20422 5750 Shaft with 8386
44- 44 44
20423 5751 Bracket with 155c
and 449c
141d 5750 Plaiting Cam Shaft Bracket Screw
1667r 5750 " " Thumb Nut
20424 5750 " Eccentric with two 458c
458c 5750 " " • Set Screw
20425 5750 " Gear (back) with two 178p
178p 5750 " " " Set Screw
20426 5752 " " (front) with two 882c
882c 5752 " " " Set Screw
20427 5746 " " (intermediate) large
20428 " " " " 20427
with 9754 and 20429
20429 5746 Plaiting Gear (intermediate) small
9754 5746 " " " Position Pin..
20430 5746 " " " Stud
449c 5746 " " " " Set Screw
20491 5751 " " Cover with 20492 and two
402d
20492 5751 Plaiting Gear Cover Plate
402d 5752 " " " " Screw
145d 5752 " " " Screw
20432 5751 " Lever
20433 5751 " " Bracket with two 443c...
NO. PLATE NAME
141d 5750 Plaiting Lever Bracket Screw

20434 5752 " " Connecting Rod with two
794e
794e 5752 Plaiting Lever Connecting Rod Adjusting
Screw
199d 5752 Plaiting Lever Connecting Rod Cap Screw
20435 5752 " " Hinge Stud
443c 5752 " " " " Set Screw
20436 5752 " Regulating Stud
lC63.r 5752 " " " Nut
20437 5752 « " " " Washer....
43889 5752 " Rock Shaft
20439 5752 « " " Crank with two 200p
200f 5752 " « « " Set Screw ...
20440 5753 " " " Lever
20441 5753 " " " " Arm
20442 5753 " " " « " Hinge Stud
155c 5753 " " " " " " "
Set Screw
20443 5753 Plaiting Rock Shaft Lever Connecting
Rod
Rod Crank with 1961
Rod Crank Roller and Screw Stud
1521j 5753 Plaiting Rock Shaft Lever Connecting
Rod Crank Roller and Screw Stud Nut
Washer
66f 5753 Plaiting Rock Shaft Lever Hinge Screw
(back)
(front)
32f 5753 Plaiting Rock Shaft. Lever Hinge Screw
(intermediate)
20059 5736 " " Guide Bracket with 453c...
453c 783 " " " " Set Screw...
2062 771 " " Lifter
689c 782 « " Screw
1520J 783 " " " " Nut
Bracket
another Spring is specified on order.
NO. PLATE NAME
12139 2004 Prc.sser Bar Spring (medium) .055 wii e ..

20023 2004
i(
" " (heavy) .063 wire ..
U
11170 771 " " Washer
U
20445 5744 Foot
n
176d 2038 " Screw
20446 5754 Separating Blade
tt
20447 5751 " Bracket
ii
145d 5752 " " Screw
U
20448 5754 " Holder
U
185h 5754 " " Screw
ii
241d 5754 " Screw
ii
62739 " Case
u
15140 2013 " Latch
ii
2973 771 " Lever
ii
2974 771 " " " " Fulcrum
Pin

592e 782
ii
" " " Stop Screw..
2974 and 15140
ii
2523 771 " " " " Rivet
ii
24412 1361 " " " Plate
it
391d 1366 " " " " Screw
62740 771 Shuttle Bobbin Ca.se complete, Nos. 591p.
592e , 2523, 2975, 7553, 15141, 15278
and 62739
591f 782
ii
Tension Regulating Screw
15278 771
ii
" Spring
19292 771 Shuttle, ll J in. diam., Nos. 2996, 12393
and 62740
ii
12444 771 « 12394 with two 1266c....
it
2049 773 " Pin
a
ii
2531 767 Race Back
ii
2532 772 " " Position Pin
2533 767
it
" " Spring
ii
907d 782 " " " Screw
24413
ii
" Body
a
25000 " " 24413 with 24414 and
two 1053d
ii
1053d 2006 " " Screw
NO. PLATE NAME

2533, 24412, 25000 and two each 391d
and 2532
20449 " SUde
4307 772 " " " Spring
50216e 8628 " " " " Screw
20449 .and two 50216e
20451 5755 Strip Guide (left)
20452 5755 " (right)
20453 5755 " Holder (back)
20454 5755 " (front)
43944 5806 " " Lever
12398 773 " Hinge Pin
12329 772 " Spring
32574 5806 " Pin
44141 " " " 50327c with 1560c..
43945 5806 " Spring
44118 Tension complete, Nos. 7336,32572, 32574
43945, 43946, 44141 and two 2102
624c 8628 Set Screw
3094 773 " Wedge
690b 782 " Screw....
12408 770 Lever
775e 782 " Cap Screw ....
12166 773 " Hinge Pin
12409 770 " Link
11204 770 " " " " Hinge Pin...
435c 5806 " " " " " Set
Screw
12166, 12408 and 12409
7336 772 " " " Regulator
11204, 12404, 12410 and 43997
NO. PLATE NAME

69lP 782 " " Screw
power table

in SINGER Machines
are marked with the

FOR
MACHINE No. 31-39

FORDARNING LACE CURTAINS. THROAT PLATE WITH SMALL
NEEDLE HOLE. NO FEED MECHANISM.
NO. PLATE NAME
♦44010 Arm with 11104

21453 773 " Oil Tube for intermediate bearing..
11119 773 " " " with 52045, for oiling 12408..
21454 773 " " " " " " " 12409..
52045 8628 " " " Packing (braided cotton) .,
854e 783 " (front)
12427 766 " Shaft
♦44172 " " 12427 with 20188
44192 " " 44172 with 20197
♦11104 " " Bushing (front)
448c 783 " " " " "Set
Screw
12480 767 " Side Cap
219d 774 " " " Screw
12193 2004 " " Cover
11241 2003 " " Washer (cloth)
12358 2000 Balance Wheel (power) light rim, 2-^ in.
2135 2000 Balance Wheel (stand) heavy rim, hi*
pulley, for 3022
pulley, for 3022
♦12360 Bed
248a 2011 " Stop Screw..
2020 2003 " Washer
•3023 " " " Flanged Bushing....
4933 2003 " " " " " 3023
with two 462c
NO. PLATE NAME

462c 773 " " " " " Set
Screw
256j, 2020 and 4933
two 896e
896e 773 " " " " Screw
1619b 773 " " " " " Nut.
12366 Face Plate
12150 773 " " " " 4 4 181 with
12152
2827 773 " " " " (upper) with 8505
8505 773 " " " " " Rivet...
12366

43886 5738 Finger Protector
129d 5736 " " Screw
14017 5736 " " " Washer
*12382 770 " " Connecting Link with 794e.
43997 " " " " 12382 and
12384

Screw
1904 770 " " " " Roller (roller
only)
Nos. 453c, 1904 and 12383
20188 767 Needle Bar Crank with 858g and 1065c..
858c 783 " " " Set Screw
233d 782 " " " " Screw
4303 773 " Clamp with 808f
808f 782 " " Screw
NO. PLATE NAME

4784, 12388 and 24104
448c 783 " *' " " "SetScrew
4784 1353 " " " Oil Pad
12389 766 " Shaft
19496 " " Crank for 19447
44134 " " " " 44135
2049 773 " " " Pin
457c 783 " " " Set Screw for
19447
44135
19448 2011 Oscillating Shaft Crank Slide Block
2260 1371 " " " " "Cap
Screw
Screw Wa.sher
Stud
1518.1 783 Oscillating Shaft Crank Slide Block Screw
Stud Nut
plete, Nos. 226d, 988c, 12424 and 19448
19447 2011 Oscillating Shaft Crank complete. No .
457c, 1518J, 19449 and 19496
1518j, 19449, 44134 and two 453c
62739 " " Case
15140 2013 " " " Latch
2973 771 " " " " Lever
2974 771 " " " " « Fulcrum
Pin
592e 782 " " " " Stop Screw...
15141 Shuttle Bobbin Case Hinge, No.s. 297.3,
2974 and 15140
7553 771 Shuttle Bobbin Case Po.sition Finger
2523 771 " " " « •' Rivet
24412 1361 " " " " Plate
391D 1366 " " " " " Screw
592e, 2523, 2975, 7553, 15141, 15278
and 62739
12393 771 Shuttle. Body
59If 782 " Teasion Regulating Screw
NO. PLATE NAME
15278 771 Shuttle Tension Spring

19292 771 Shuttle, 1 Ifi in. diam., Nos. 2996, 12393
and 62740
'12394 Shuttle Driver
12444 771 " 12394 with two 1266c
2049 773 " Pin
1266c 5806 " " Set Screw
2531 76)7 " Race Back
2533 767 " Spring
907D 782 " " " " Screw
24413 " Body
25000 " " " 24413 with 24414 and
two 1053d
1053d 2006 " " " Screw
24415 1361 Shuttle Race complete, No.s. 9D7d, 2531,
2533, 24412, 25000 and two each 391d
and 2532
12431 " Slide
4307 772 " " Spring
725e 1387 " " " " Screw
12431 and two 725e
1560c 783 Regulating Thumb Nut..
32572 580() Relea-sing DLsc
43944 5806 " Lever
12398 773 " " Hinge Pin
12329 772 " *' Spring
32574 5806 " Pin
50327c 5800 Screw Stud
44141 " 50327c with 1500c..
43945 5806 Spring
12149 2014 Thread Guard
44118 Tension complete, Nos. 7336, 32572, 32574
43945, 43946, 44141 and two 2102
12404 770 Take-up Crank
3094 773 " " Wedge
690e 782 " Screw....
12408 770 " Lever
775e 782 '* " Cap Screw
12166 773 " " Hinge Pin
12409 770 " " Link
NO. PLATE NAME
11204 770 Thread Take-up Lever Link Hinge Pin...

435c 5806 " " " " " " Set
Screw
12166, 12408 and 12409
7336 772 " " " Regulator
448c 783 " " " " Set Screw
11204, 12404, 12410 and 43997
12298 Throat Plate, large needle hole
12422 5743 " " small needle hole
691f 782 " " Screw
power table

in SINGER Machines
are marked with the
Company's Trade Mark "SIMANCO**"

103

FOR
MACHINE No. 31-42

FOR FLOSSING CORSETS AND ORNAMENTAL STITCHING. STOPS
AUTOMATICALLY WITH PRESSER RAISED EACH TIME THE
NEEDLE RISES; NO FEED MECHANISM. THE WORK IS
MOVED BY HAND TO FORM THE DESIRED ORNAMENT.
NO. PLATE NAME

•43801 Arm with 11104
12454 773 " " " with 52045, for oiling.12167.
11119 773 " " " *' " " " 12165.
748e 782 " Screw (hack)
854e 783 " " (front)
43802 5735 " Shaft
•44112 " 43802 with 43803
•44200 " " 44112 with 20197
20321 2048 " " Bushing (back)
448c 783 " " " " Set Screw.....
•11104 " " " (front)
12193 2004 " Side Cover
11241 2003 " " " Washer (cloth)
•12360 Bed
two 896e
896b 773 " " " " Screw
1019E 773 " " " " " Nut.
12313 2049 Driving Pulley
12316 5738 " " Friction Ring (leather) ...
12345 5739 " " " " Stop Pin...
1494d 5739 " " Screw
12314 5739 " " Spring
43818 5739 " " " Washer
2269 773 " " " " Stop Pin ..
12366 Face Plate
12150 773 " " " " " 44181
with 12152
NO. PLATE NAME

2827 773 " " « " (upper) with
8505
12366
286d 783 " " Thumbscrew '
"•12196 5739 " " Connecting Link with 794e. .
44008 " " " " 12196 with
12131 •
Screw
12131 5739 Needle Bar Connecting Stud with 155c...
1550 5739 " " " " Set Screw..
43803 5738 " " Crank and Lifting Cam with
448c and 1362c
1362c 5739 Needle Bar Crank and Lifting Cam Posi
tion Screw
448c 783 Needle Bar Crank and Lifting Cam Set
Screw
233d 782 " " " " Screw
4303 773 " Clamp with 808f
808f 782 " " Screw
24105 Oscillating Rock Shaft complete, No.-<.
4784, 12388 and 24104
448c 783 " " " " "SetScrew
4784 1353 " " " Oil Pad
12389 766 " Shaft
19496 " " Crank for 19447
44134 " " " " 44135
2049 773 " " " Pin
457c 783 " " " Set Screw for 19447
453c 783 " " " " " " 44135
19448 2011 " " " Slide Block
2260 1371 " " " " " Cap
Screw
Screw Washer
Stud
NO. PLATE NAME

Stud Nut
plete, Nos. 226d, 988c, 12424 and 19448
457c, 1518.1, 19449 and 19496
44135 5806 Oscillating Shaft Oank complete, Nos.
1518.f, 19449, 44134, and two 453c
453c 783 " " " " Set Screw
Bracket
12284 5738 Presser Bar Lifting Lever with 448c
802d 782 *' " " " Hinge Screw...
12285 " " " " Lifter
12286 5739 Presser Bar Lifting Lever I.ifter complete.
Nos. 775e, 1976 and 12285
800c 5739 Presser Bar Lifting Lever Lifter .\djusting
Screw
1520.I 5739 Pre.sser Bar Lifting Lever Lifter Adjusting
Screw Nut
801e 5739 Presser Bar Lifting Lever Lifter Hinge
Screw
1976 5739 Pr&sser Bar Lifting Lever Lifter Holler
(roller only)
775e 782 Presser Bar Lifting Lever Lifter Holler
Cap Screw
12241 772 Presser Bar Lifting Lever Link
766d 782 " " " " " Hinge
Screw
12240 772 Presser Bar Lifting Lever Pin
448c 783 " " " " " Set Screw
12287 5757 " " Spring (light) .0345 wire
Note: No. 12287 is sent with this machine juiless
20363 5757 Presser Bar Spring (heavy) .0405 wire—
11170 771 " " " Washer
43804 5740 " " Stop Collar with 1253c
1253c 5740 " " " " Set Screw
43817 5741 " Foot
35599 2669 " " for etching
190d 782 " " Screw
1648e 5740 " " " "Lock
Nut
NO. PLATE NAME

62739 " Case
16140 2013 " Latch
2973 771 « " " " Lever
2974 771 " " Fulcrum
Pin
592e 782 " Stop Screw...
2974 and 15140
2523 771 " Rivet
24412 1361 " Plate
391d 1366 " Screw
592e, 2523, 2975, 7553, 15141, 15278
and 62739
15278 771 " " Spring
19292 771 Shuttle 1H in. diam., Nos. 2996, 12393
and 62740
U2394 Shuttle Driver
12444 771 " " 12394 with two 1266c
2049 773 " Pin
2533 767 " Spring
907d 782 " Screw
24413 " " Body
25000 " " 24413 with 24414 and
two 1053d
1053d 2006 " " " Screw
2533, 24412, 25000 and two each 391d
and 2532
145u 782 Shuttle Race Screw
12431 " " Slide
4307 772 " Spring
725e 1387 " Screw
12431 and two 725f.
12318 Starting Bell Cnink
12343 5738 Starting Bell Crank complete, Nos. 12318
to 12320
NO. PLATE NAME

12312 2049 Starting Bell Crank Bracket with 443c...
12344 Starting Bell Crank Bracket complete,
Nos. 16c, 1513J, 1517J, 1885, 2018,
12312, 12322, 12323, 12343, 25350 and
44230
692d 783 Starting Bell Crank Bracket Screw
1517J 5740 " " " " " Nut....
12319 5740 " " " Pitnam Stud
25350 5740 " " " " " Cotter Pin
2018 1101 " " " " "Washer
1885 5740 " " " Roller with 190d, 1054c
and 5968
190d 782 Starting Bell Crank Roller Screw
1054c 5837 " " " " " Stud...
1513J 783 " " " " " " Nut
5968 5837 " " " " " Washer.
12320 5740 " " " Stop Pin
44228 8629 Stop Pawl
44230 Stop Pawl complete, Nos. 376e, 44228 and
44229
12322 5740 Stop Pawl Hinge Pin
443c 5740 " " " " Set Screw
12323 5740 " " Spring
44229 8628 " " Wearing Block
376e 8628 " " " " Screw
43941 " Wheel with 2269
43942 5738 " " Block
840d 5740 " " " Screw
25104 5741 " " Pin
43943 5735 Stop Wheel complete, •Nos. 446c, 12316,
12345, 43941, 43942 and two 840d ....
43944 5806 " " Lever
12398 773 " " " Hinge Pin
12329 772 " " " Spring
32574 5806 " " Pin
44141 " " " 50327c with 1560c...
43945 5806 " Spring
43945, 43946, 44141 and two 2102
2455 2014 Thread Retainer Disc
NO. PLATE NAME
1562.f 2014 Thread Retainer Regulating Thumb Nut.

418r 2014 " " Screw Stud
43808 5741 « " Spring
43809 Thread Retainer complete, Nos. 418d,
1562J, 43808 and two 2455
12130 5741 Thread Take-up Crank
3094 773 " " " Wedge
690e 782 " " " " Screw....
12165 5741 « " Lever
775e 782 « " « Cap Screw
12166 773 " " " Hinge Pin
12167 5741 " " " Link
11204 770 " " " " Hinge Pin...
435c 5806 " " " " " " Set
Screw
12165 to 12167
*44179 Thread Take-up Lever complete, Nos.
775e, 11204, 12130, 12164 and 44008..
7336 772 " " " Regulator
448c 783 « " " " Set Screw
12298 Throat Plate, large needle hole
12422 5743 " " small needle hole
Note: Nos. 12298 and 12422 are sent with this machine
power table
LIST OF PARTS TO BE USED WITH
31-42 MACHINE
WHEN OPERATED HEAD ON
NO. PLATE NAME
19219 1206 Bed Frame Cushion (leather)

158c 1206 " " " Screw
19220 1206 " " " Spring
19226 1206 " " Hinge Connection
19398 " " " " 19226 with
21lE and 19397
19397 1206 Bed Frame Hinge Connection Cap
211e 1206 " " « " « Screw.
16555 1206 " " " Plate
14010 1206 " " " " Rivet
20067 819 Bed Frame with two each 16555, 19398
four each 19219, 19220, six each 14010,
wood screws IJiC in. No.12 and eight 158c
NO. PLATE NAME
27636 363 Starting Treadle

9082 773 " " Bearing Cotter Pin
43810 5760 " " Extension
51075r 5843 " " • " Bolt with 51581 r
51581r 5843 " " " "Nut
6055 5741 " " " " " Washer
326e 5741 " " " Screw
6055 5741 " " " " Washer..
43811 5760 " " Pitman Rod (lower)
12283 5741 " " " " " Joint
43812 5760 " " " " (upper)....
12317 5741 " " " " " Joint
43813 5741 " " " " Clamp with
354c
354c 1101 Starting Treadle Pitman Rod Clamp Screw
43814 Starting Treadle Pitman complete, Nos.
12283, 12317 and 43811 to 43813
25089 5741 Starting Treadle Pitman Cotter Pin
11742 5741 " " " Washer
2878 363 " " Stand
43815 Starting Treadle complete, Nos. 326e,
2878, 9082, 27636, 43810, 51075R, two
6055 and four wood screws 1 in. No. 16
43816 Starting Treadle and Pitman complete,
Nos. 11742, 25089, 43814 and 43815...
14229 5760 Table Belt Guide (lower) Bracket with
448c
14230 5760 Table Beit Guide (lower) Pulley
14231 5757 " " *" " " Shaft with
858c
858c 783 Table Belt Guide (lower) Pulley Shaft Oil
Hole Plug Screw
448c 783 Table Belt Guide (lower) Pulley Shaft Set
Screw
14232 5760 Table Belt Guide (lower) complete, Nos.
14229 to 14231 and four wood screws
in. No. 10 R. H. B
10857 5760 Table Belt Guide (upper) Bracket with
448c
10859 5760 Table Belt Guide (upper) Pulley
10858 5757 " " " " " Shaft...
448c 783 " " " " " " Set
Screw
10856 5760 Table Belt Guide (upper) complete, Nos.
10857 to 10859 and three wood screws
IM in. No. 12 R. H. B
110
STARTING TREADLE PARTS

FOR 31-42 MACHINE
NO. PLATE NAME
25082 6760 Treadle

28054 5742 " Centre
20039 5760 " " Bracket with 28054 and
two wood screws 1 in. No. 10
12439 Treadle Pitman complete, Nos. 12283,
12317, 43813 and two 12281
12281 5760 Treadle Pitman Rod

43813 5741 " " " Clamp with 354c...
354c 774 " " " " Screw
12317 5741 " " " Joint (connecting
stud)
12283 5741 Treadle Pitman Rod Joint (treadle)
7958 5741 " " Stud Pin
11742 5741 " " Washer
296c 5742 " Screw Centre
46661 " " " 296c with 1507r....
20040 5760 " " " Bracket with 46661
and two wood screws 1 in. No. 10
1507h 5742 Treadle Screw Centre Nut
MACHINE BASE
NO. PLATE NAME
19219 1206 Bed Frame Cushion (leather)

158c 1206 " " " Screw
19220 1206 " " " Spring
19226 1206 " " Hinge Connection
19398 " " " " 19226 with
21lE and 19397
19397 1208 Bed Frame Hinge Connection Cap
211e 1208 " " " " " Screw
16555 1206 " " " Plate ;..
14010 1206 " " " " Rivet
20067 819 Bed Frame with two each 16555, 19398,
wood screws 114 in. No. 12 and eight
158c
Ill
ATTACHMENTS and ACCESSORIES

NO. PLATE NAME
51075E 5843 Machine Hinge Bolt with 51581e

51581E 5843 " " " Nut
6055 5843 " " " " Washer
12361 772 " " Connection
44139 772 " " Plate
44140 Machine Hinge complete, Nos. 12361,
44139 and Merlized wood screw IJ^ in.
No. 14
44180 Machine Hinge complete,N08.6O55,12361,
44139, and 51075e
12405 774 Machine Rest (felt)
28084 " " Pin
41400 6120 " " " (wood) 3H in. long ..
120342 2045 Oiler (copper plated) with 120343
120343 2045 " Spout, in. long
26026 2045 Screw Driver (machine)
26485 2045 " " (shuttle tension)
35018 2045 Tape Delivery Wire for 31-37 Machine...
8909 2045 Wrench for 1513, 1517, 1518 and 51581,.
4822 2045 " " 1521 and 1528
8908 2045 " " 1519, 1520 and 1620
19221 2045 " " 936, 1516 and 1619
22003 2045 " " 1550
20461 2045 " " 1582 and 1668
20364 2045 " " 1648
BELT GUARDS
NO. PLATE NAME
41929 5844 Belt Guard
8418 5842 " " Button
8419 5842 " " " Washer (leather)
8420 " " " 8418 with 8419 and
wood screw \)/i in. No. 9 R. H. B
41930 5842 Belt Guard Hinge
41931 Belt Guard complete, Nos. 8420, 41929
two 41930 and four wood screws ^ in.
No. 9
FOR BENCH STAND
126356 5763 Belt Guard

126363 8629 " " Bracket
112 BELT GUARDS
NO. IM.AIK NAME

126364 8629 Belt Guard Extension
1620 8628 " " " Screw
9331 8628 " " " " Washer
1480d 8628 " " Retaining Screw
50551.1 8628 " " Set Screw
126365 Belt Guard (adjustable) complete for
79758, Nos. 162d, 1480d, 9331, 50551J,
126356, 126363, 126364 and two wood
.-screws 1 in.Xo. 10
BINDERS
When Ordering Binders send Sample of the Binding
and Material to be Bound
BINDER (Adjustable)
SIZE 1
NO. PLATE NA.\IE
25644 2024 Bed with 25645

25645 2024 Folder
25646 " Guide (lower) with 25855
25855 2038 " " " Screw Stud
25647 2024 " " (upper)
15770 2024 " " " Thumb Nut
25648 2024 Pressure Spring
3340 2038 " " Screw
7071 2021 " " " Washer
25650 2024 Binder complete, Nos. 334d, 1577d, 7071,
25644 and 25646 to 25648
190d 782 Binder Screw
BINDER (Adjustable)
SIZE 2
This Binder Is the same as 25650 with

the following exceptions:
NO. PLATE NAME
25651 Bed with 25652, in place of 25644

25652 Folder, in place of 25645
25653 Binder complete, Nos. 334d, 1577d, 7071,
25646 to 25648 and 25651
113
BINDER (Adjustable)
SIZE 3
This Binder Is the same as 25850 with

NO. PLATE NAME

25654 Bed with 25655, in place of 25644
25655 Folder, in place of 25645
25656 Binder complete, Nos. 334d, 1577d, 7071,
25646, to 25648 and 25654
BINDER (Adjustable)
FOR SOFT HATS
NO. PLATE NAME

36456 6254 Bed
36457 6254 Folder with 25669, 36458 and two 7476..
36458 6254 " Guide Block
7476 2038 " " " Rivet
25669 " Slide with 25670 and 25671
25670 2038 " " Block
25671 2038 " " " Rivet
25672 6254 " " Carrier with 656e
656e 2038 " " " Adjusting Screw
1536d 6254 " " " " Thumb Xut
25673 6254 " " "
Guide
401e 2038 Folder Slide Carrier Adjusting Thumb
Xut Guide Screw
334d 2038 Folder Slide Carrier Screw
36459 6254 Guide (back, lower)
36460 6254 " (back, upper)
233d 782 " (back) Screw
36461 6254 " (front, lower)
36462 6254 " (front, upper)
233d 782 " (front) Screw
25677 6254 Pressure Spring
334d 2038 " " Screw
36463 6254 Binder complete, Xos. 401E, 1536d, 25672,
25673, 25677, 36456, 36457, 36459 to
36462, two 233d and three 334d
190d 782 Binder Screw
28713 1391 Presser Foot, for soft hat binding
Note: Presser Foot 28713 is used with, but not
included in 36463
114
BINDER (Adjustable)
FOR 31-19 MACHINE
NO. PLATE NAM£

*26951 Folder (lower)
*26952 " (upper)
26953 1379 Folder with Ribbon Tension complete,
Nos. 26951,26952, two each 193f, 7071
and nine 26486 •
193p 1379 Folder Screw
7071 1379 " " Washer
26954 1378 Lifting Presser Foot
26486 2022 Ribbon Tension Pin (straight)
26955 1378 Throat Plate with Extension for 24344...
19376 1378 Vibrating Presser Foot
26956 Binder complete, Nos. 283d, 19376,
24344 and 26953 to 26955
283d 1379 Binder Thumb Screw
BINDER (Adjustable)
FOR CAP FRONTS
FOR 31-20 MACHINE
NO. PLATE NAME

26695 2024 Bed with 9558
25698 2024 Folder
9558 2038 " Steady Pin
26696 2024 Guide (lower) with 1141d and 9780
1141d 5806 " " Screw Stud
9780 2038 " " Stud
1566d 2024 " " Thumb Nut
26697 2024 " (upper)
152f 2038 " " Screw
7071 2021 " " " Washer
25703 2024 Pressure Spring with 26698
26698 2024 " " Lifting Button
334d 2038 " " Screw
7071 2021 " " " Washer
26694 2024 Bindercomplete, Nos.334d, 1566d, 25698,
25703, 26696, to 26697, two 152p and
three 7071
115
BINDER (Adjustable)
FOR LEATHER BINDING, CANVAS BAGS,
LEGGINGS, ETC.
NO. PLATE NAME

36340 5807 Bed with two each 1036c and 1266c
36342 5807 Guide (lower)
36343 5807 " (upper)
286d 5807 " Thumb Screw
1036c 5806 Leveling Screw (back)
1266c 5806 " " (front)
36344 5807 Binder complete, Nos. 286d, 67Id and
36340 to 36343
BINDER (Adjustable)
FOR SLEEVE FACINGS ON MILITARY COATS
NO. PLATE NAME

120165 5839 Binder on 28971
28972 5839 Arm
940d 5742 " Hinge Screw
28973 5839 Hinge Plate
28971 2669 Shank
286d 783 " Thumb Screw
7071 2021 " " " Washer
120166 5839 Binder complete, Nos. 286d, 940d, 7071,
28972, 28973 and 120165
BINDER (Adjustable)
FOR GENERAL WORK
NO. PLATE NAWE

25657 1949 Bed with 656e and three 447f
25662 1949 Binding Guide
233d 782 " " Set Screw
25658 1949 Guide (centre, large) with 589b
25659 1949 " (centre, small) with 589e
656e 2038 " (centre) Screw
1566d 2024 " " Thumb Nut
25660 1949 " (lower)
8975 8628 " " Rivet
25661 1949 " (upper)
589b 2038 " " Clamping Screw
1571d 1949 " " " Thumb Nut.
116 BINDERS
NO. PLATE NAME
207f 2021 Guide (upper) Screw

7071 2021 " Washer
447f 2038 Leveling Screw
25663 1949 Presser Foot
25664 1949 Binder (adjustable) complete, Nos. 207p,
233d, 1566d, 1571i>, 7071, 25657 to
25663 and two 8975
152P 782 Binder Screw
7071 2021 " Washer
BINDER (Adjustable)
TO TURN IN UPPER EDGE ONLY. FOR LIGHT
OR MEDIUM WEIGHT MATERIAL
NO. PLATE NA.ME

120242 7790 Bed with 1036c
120244 7790 Folder (upper)
120245 7790 Guide (centre)
120246 7790 " (lower)
286d 783 " Thumbscrew
1036c 7790 Leveling Screw
120247 7790 Binder (adjustable) complete, Nos. 286d,
120242 and 120244 to 120246
7298 2014 " " Hinge Pin
120143 " " Plate
19335 " " Shank
120144 5847 Presser Foot (hinged) complete, for
120247, Nos. 7298, 19335 and 120143..
26603 7696 Feed Dog for 120247, 20 teeth (16 teeth to
the inch!
BINDER (Adjustable)
TO TURN IN BOTH EDGES. FOR LIGHT
OR MEDIUM WEIGHT MATERIAL
NO. PLATE NAME
120242 7791 Bed with 1036c

120243 7791 Folder (lower)
120244 7791 " (upper)
120245 7791 Guide (centre)
1036c 7790 Leveling Screw
120248 7791 Binder (adjustable) complete, Nos. 286d
and 120242 to 120245
HINDERS Hi
NO. PLATE NAME

7298 2014 " " Hinge Pin
120143 " " Plate
19335 " " Shank
Nos. 7298, 19335 and 120143
26603 7696 Feed Dog for 120248, 20 teeth (1(5 teeth to
the inch)
26(>05 7696 Throat Plate for 26C03
BINDER (English)
NO. PL.\TE NAME

25721 2021 Folder
207f 2021 " Screw
7071 2021 " " Washer
26614 2021 Ribbon Tension Pin (bent)
26615 2021 " " (straight)
26616 2021 " " Plate
25722 2021 Ribbon Tension complete, Nos. 26614,
26616 and four 26615
190d 782 Ribbon Tension Screw
7071 2021 " " " Washer
26250 Binder complete, Nos. 190d, 207f, 12425,
25721, 25722, 2598:1, 26249 and two
7071
BINDER (English)
This Binder Is the same as 26250 with the
following exceptions:
NO. PLATE NAME

12370 2692 Feed Dog, 15 teeth (16 teeth to the inch),
in place of 12425
26465 2692 Throat Plate, large needle hole, for 12370,
in place of 26249
35741 - Throat Plate, small needle hole, for 12370,
in place of 26249 *
26466 — Binder complete, Nos. 190d, 207f, 12370,
25721, 25722, 25983, 26465 or 35741
and two 7071
118
BINDER (English)
This Binder is the same as 26250 with the
foiiowing exceptions:
NO. PLATE NAME

in place of 12425
in place of 12425
and 44253, in place of 26249
and 44253, in place of 26249
28657 Binder complete, Nos. 190d, 207p, 12369
or 12457, 25721, 25722, 25983, 28655
or 28656 and two 7071
BINDER (English)
FOR CUT CLOTH
NO. PLATE NAME

25733 2022 Folder, for }'2inch binding
207f 2021 " Screw
7071 2021 " " Washer
26400 2022 Pres.ser Foot
26486 2022 " " " (straight)
26618 2022 " " Plate
26618 and seven 26486
7071 2021 " " " Washer
26402 Binder complete, Nos. 207f, 19474, 25733,
25734, 26400, 26401, two 190d and three
7071
BINDER (English)
NO. PLATE N.\ME
120001 5838 " " (spiked teeth) 12 teeth (10 teeth
to the inch)
28334 1380 Folder
193f 1379 " Screw
7071 1379 " " Washer
BINDERS 119
NO. PLATE NAME
28676 1381 Pres.ser Foot

26617 2022 Ribbon Tension Pin (l)cnt)
26486 2022 " " " (straight)
28336 " " Plate
28337 1380 Ribbon Ten.sion complete, Nos. 26617,
28336 anil eight 26486
28678 Binder complete, Nos. 193f, 7071, 26603
or 120001, 28334, 28337, 28676, 28677
and two 233d
BINDER (English)
FOR CARPETS

NO. PLATE NAME

in place of 26603
28775 1382 Throat Plate for 12370, in place of 28677.
28776 Binder complete, Nos. 193p, 7071, 12370,
28334,28337,28076,28775 and two 233d.
BINDER (English)
FOR AWNINGS
NO. PLATE NAME

120434 8211 Feed Dog, 7 teeth (16 teeth to the inch)..
120433 8211 Folder
207f 2021 " Screw. !
7071 8211 " " Washer
26615 2021 " " " (straight)
26616 2021 " " Plate
26616 and four 26615
7071 2021 " " " Washer
120437 Binder complete, Nos. 190d, 207f, 25722,
120433 to 120436 and two 7071
120
BINDER (English)
FOR SLIP COVERS AND GENERAL WORK
NO. I'l.ATE NAME
120458 8211 Prcsser Foot, in place of 120435

120459 Hinder complete, No.s. 190d, 207f, 25722,
120433, 120434, 120436, 120458 and
two 7071
BINDER (English)
FOR 31-15 MACHINE
NO. I'LATE NAME
120120 5838 Folder with 665d and 120121

120121 5838 " Guide
()65d 1.388 " " Screw
220i> 2038 " Screw
780(5 5838 " " Washer
2(5(514 2021 Ribbon Tension Pin {i)cnO
2(5615 2021 " " " (straight)
120122 5838 " " Plate
120123 5838 Ribbon Tension complete, Xos. 2(5(514,
120122 and six 26615
190i) 782 Ribbon Tension Screw
7071 2021 " " " Washer
120127 Binder complete, No.s. 220d, 7806, 120120,
120123 to 120126 and two each 190i)
and 7071
BINDER (English)
FOR 31-19 MACHINE
NO. I'LATE NAME

25744 1314 Folder and Ribbon Tension with nine
26486, for Yi in. binding
25745 Folder and Ribbon Tension with nine
26486, for in. binding
671d 1314 Folder and Ribbon Tension Thumb Screw
26486 2022 Ribbon Tension Pin (straight)
26700 1314 Throat Plate with Extension for 26699...
26701 Binder complete, Nos. 671d, 25744, 25745,
26699, 26700, 26702 and 26703
121
BINDER (English)
FOR 31-19 MACHINE

NO. IM.ATE NAME

in place of 12425
26702 1314 Lifting Presser Foot, in place of 26983...
26703 1314 Vibrating Prcsser Foot
28784 Hinder complete, Nos. 190d, 207f, 20106,
25721, 25722, 26702, 26703, 28783 and
two 7071
BINDER (English)
FOR CIRCULAR BINDING ON IMITATION LEATHER
FOR 31-19 MACHINE

NO. l'I.ATE NAME
120433 8211 Folder
207f 2021 " Screw
7071 8211 " " Washer
120436 8211 Throat Plate
120467 Binder (English) complete, Nos. 207f,
7071, 120433, 120434, 120436, 120465
and 120466
BINDER FOR CIRCULAR BINDING

(BIAS FOLDED STRIPS)
FOR LADIES' LAWN TIES, ETC.
NO. PLATE N.AME

28857 2645 Folder
207f 2645 " Screw
7071 2645 " " Washer
28858 2645 Pres.ser Foot with 242d, 23219 and 28859.
28859 2645 " " Edge Guide
23219 2645 " " " " Position Pin...
242d 2645 " " " " Screw
122 BINDERS
NO. PLATE NAME
28860 2645 Strip Guide

207f 2645 " " Screw
7071 2645 " " " Washer
28861 Binder complete, Nos. 28790,28792,28857,
28S58,28860 and two each 207f and 7071

FOR SANDALS. SLIPPERS, SHOE TONGUES, ETC.
FOR 31-19 MACHINE
NO. PLATE NAME
28790 2645 Peed Dog, 11 teeth (24 teeth to the inch).

120493 8630 Folder with two 51022.(, for ]4 in. to in.
Kiiugcs
120494 8630 Folder with two 1368.1, for H in. to ^ in.
K!iugc.s
120495 8630 Folder with two 13G8.r, for in. to 1 in.
gJiugcs
207f 2645 Folder Screw
7071 2645 " " Washer
28791 2(>45 liifting Prcsser Foot
36620 2645 Hihlxm Guide
337i> 2645 " " Screw
7806 2645 " " " Washer......!.'!!!
28793 2645 Vihraling Pre.s.scr Foot
28794 Binder conii)lote, Nos. 207k, 337i>, 7071,
7S0(), 28790 to 28793, 36620 and 120493,
120494 or 120495
1368.1 8(>30 Binder Screw for 120494 and 120495
51022.1 8630 " " " 120493 !

(BIAS BINDING)
FOR SUSPENDER ENDS AND TABS WITH MOVABLE
FOLDER FOR FINISHING OFF
FOR 31-19 MACHINE
NO. I'I...*.TI'; .V.\.\!E

28823 2646 Binder on Shank
207k 2645 " Screw
7071 2645 " " Washer !.!!!!!!!!!!!
28824 264() Feed Dog, 6 teeth (24 teeth to the inch).
BINDERS 123
NO. PLATE NAME

28828 Bindercomplete,Nos.207F, 7071 and 28823
to 28827
BINDERS (Foot)
NO. PLATE NAME
28665 2606 Binder (foot)
28666 2606 " " right hand
28667 2606 " " left hand
36700 5808 " " left
28717 1388 " " right
35069 2666 " " for strip, to turn the upper
edge in, for skirt facings, etc
28769 1390 Binder (foot) to turn top only
BINDER (Transverse) ON SHANK

(WITH TAPE REEL)
FOR WOOLEN COATS
NO. PLATE NAME
120532 8631 Binder (transverse) on Shank

43525 8631 " Steady Pin
51097J 8631 " Thumb Screw
3146 1353 " " " Washer
120535 8632 Tape Reel Arm with 11656 and 120537..
11656 8631 " " " Steady Pin
51097J 8631 " " " Thumb Screw
120536 8632 " " Disc with 120538 and 120539
120537 8632 " " " Pin
120538 8632 " " " Stud (wood)
120539 " " " " Sleeve
120540 8631 Throat Plate with 43525, for 26603
120533 Binder (transverse) on Shank complete.
Nos. 3146, 26603, 120532, 120534 to
120536, 120540 and two 51097J
BINDERS ON SHANK
NO. PLATE NAME
25705 Binder onShank,for in. tape

25706 " " " " A in. tape
25707 2605 " " " " in. tape
124 BINDERS
NO. IM.ATK NAMK
2r)7()S Biiulei' <m Shank for •{'g in. tape

25709 " " " " H in. tape
2.5710 " " " " in. tape
2.5711 " " " " 54 in. tape
2.5712 — " " " " in. tape
257i:i - - " " " " Ts in. tape
2.5714 " " •' '• \i in. tape
2.571:5 - - " " " " 1 in. tape
2S(»ll 1290 " " " " su.spender wel)s
2S012 129(j Presser Foot ror2S011
28021 2(502 Binder on Sliank
28022 2002 " " " to (urn edftes under... .
28022 1399 " " " " " top edfje otdy,
for hindinjr coats
2SG24 2002 Binder on Siiank, to turn top edêonly, for
raw edge l)indin(!;
28025 1298 Binder on Shank, for Tg in. hindiiif;
2S02G 2001 " " " to turn top edge only,
for men's trouscr bottoms
28027 2020 Binder on Shank, for bias binding, to turn
top edge only, with guide for inserting
canvas strip
28638 2000 Binder on Shank, for dress shields
28039 2003 " " " to turn top edge only,
for suspenders
28040 2027 Binder on Shank, for lj<i in. binding, for
soft blankets
28641 2003 Binder on Shank, for {-g in. binding
28042 2003 " " " with Guide (wire) for
mattre.ss work
28092 2007 Binder on Shank, for i)inding the arm lioles
in cotton garments.
28724 2014 " " " for binding the ne<"k of
knit underwear
28732 2627 " " " to turn nnder both edges
of binding
28733 2614 Binder on Shank, for binding corset covers
28734 2015 " " " with ribbon guide, for
tlress shields
28705 2622 Binder and Folder on Shank, for folding
and binding sleeves
BINDERS 125
NO. PLATE NAME

28804 2619 " " " for binding dress shields
28751 2618 Binder and Guide on Shank, for binding
upper edge of button hole strip and
guiding strip and body for shirt waists
28851 2648 Binder on Shank, for 3 in. strip of bob-
binette material, to bind ^ in. wide...
both edges under
35065 2677 Binder on Shank, for strip, to turn in upper
edge only, for skirt facings, etc
for 35208
35208 1971 Binder on Shank, to turn in both edges, for
bias or straight binding, for skirts,
wrappers, shirt waists, etc
7298 2014 " " Hinge Pin
120143 " " Plate
19335 " " Shank
120144 5847 Presser Foot (hinged) comjilete for 35065
and 35208, Nos. 7298,19335 and 120143
35082 2680 Binder on Shank, for raw edge bias bind
ing, for wrappers, etc
35182 2684 Binder on Shank, for cut strip, with heavy
cord stitch in centre of strip, for ladies'
dressing sacques, etc
for 28731
for 28731
28731 2616 Binder on Shank, to turn under both edges
of binding in
for 35226
for 35226
35231 12.52 Presser Foot for 35226
35226 1972 Binder on Shank, for mattress work
126 BINDERS
NO. PLATE NAME

for 35325
7298 2014 " Hinge Pin
120143 " Plate
19335 " Shank
Nos. 7298, 19335 and 120143
24572• 2067 Throat Plate, small needle hole, for 19474
35325 2067 Binder on Shank, to turn top edge only.
for shirt bosoms, skirt trimmings, etc...
for 35354
for 35354
35444 Presser Foot Body
35445 " " Tension Plate with 35446...
35446 2669 " Guide Pin....
93p 2669 " Screw
2656 2669 " Spring
35447 2669 Presser Foot (tension plate) complete for
35354, Nos. 93f, 2656, 35444 and 35445
35352 970 Binder Folder on Shank
35353 970 " Hinge Plate
1425b 5742 " Screw
2749 5742 " Friction Washer
35354 970 Binder on Shank (hinged) complete, for
mattress work, Nos. 1425b, 2749, 35352
and 35353
120257 5847 Binder with tension slots on shank, for
turning in both edges of bias cut bind
ing, for light or medium weight material
FOR 31-19 MACHINE
for conset work, for 35209
35210 1252 Lifting Presser Foot for 35209
35211 1252 Vibrating Presser Foot for 35209
35209 1972 Binder on Shank, to turn in both edges, for
bias binding, for binding the inside of
small circles, corsets, etc
for 35226
BINDERS 127
NO. PLATE NAME

BINDERS (Horn) ON SHANK

NO. PLATE NAME
28619 1399 Binder (horn) on Shank

35067 2678 Binder (horn) on Shank, for strip, to turn
both edges in, for ladies' collars, etc...
7298 2014 " Hinge Pin
120143 " Plate
19335 " " Shank
120144 5847 Presser Foot (hinged) complete, for 35067,
Nos. 7298, 19335 and 120143
28941 2661 " " " for bias binding.
to turn under both edges of binding...
35062 2676 Binder (horn) on Shank, for % in. to 1)4
in. wide, for tape, for mattresses
BOX PLAITER
NO. PLATE NAME
28343 2632 Centre Guide

Note: When ordering No. 28343 state width of
plait for which it is required.
28344 2632 Centre Guide Holder with 10165

190d 782 " " " Screw
7071 2021 " Washer
10165 2633 " " Stop Pin
28345 2632 Folder Blade (left)
28346 2632 " (right)
401b 2038 " " Screw
28347 2632 Sliding Bracket (left)
28348 2632 " " (right)
28349 2632 " " Arm (left) with 2301....
28350 2632 " " " (right) with 2301...
28351 2632 " " " Extension Bracket
<( « <( « ' M
200f 2633
Screw
914f 2038 Sliding Bracket Arm Screw
26438 2632 Cap
233d 782 " " " Screw
128 BOX PLAITKR
NO. PLATE NAME

514o 2038 Sliding Bracket Locking Pin
26439 2038 " " " Bushing with
468c
1564d 2038 Sliding Bracket Locking Pin Head
2297 2038 " " " " Spring
2296 2038 " " ' " " " Bush
ing
468c 2038 Sliding Bracket Locking Pin Spring Bush
ing Set Screw
2301 5843 Sliding Bracket Stop Pin
233d 1375 " " " Screw
28352 Box Plaiter complete, Nos. 28343 to 28351
two each 190d, 200f, 514c, 914f, 1564d,
2296, 2297, 7071, 26438, 26439, four
401e and six 233d
Note: When ordering No. 28352 .state width of
plait for which it is required.
28353 2633 Presser Foot with 28354, 28355 and two
665d, for 28352
28354 2633 Presser Foot Guide (left)
28355 2633 " " " (right)
665d 2633 " " " Screw
CORDERS
When ordering Corders, or parts thereof, state
size or number of cords to the inch.
CORDER (Adjustable)
FOR SHORT TURNS ON CUSHIONS
NO. PLATE NAME
26795 5839 Cord Guide

26796 5839 " " Arm with 26798 and three
()037
1044d 1377 Cord Guide Ann Hinge .Screw
120206 5839 " " Bed with 457c.
457c 5806 " " " Leveling Screw
26798 5839 " " Bracket
6037 1377 " " " Rivet
190o 1377 Cord Gukle Screw
120207 5839 Cordcr complete, No.s. 190i), 1044», 26795,
26796 and 120206
spiked teeth
120208 5838 Presser Foot (grooved)
26605 7696 Throat Plate, large necflle hole, for 120001
129
CORDER FOR TOP CORDING

NO. PLATE NAME
25788 2026 Arm with 25789
190d 2026 " Adjusting Screw
25791 2026 " Bracket
25790 2026 " Hinge Pin
879d 2026 " Locking Screw
25789 2026 " Tip
25792 2026 Arm and Bracket complete, Nos. 190d,
879d, 25788, 25790 and 25791
26328 Corder complete, Nos. 12372,12442,25792,
25984 and two 135d
135d 2026 Corder Screw
CORDER FOR TOP AND BDTTDM CORDING

This Corder Is the same as 26328 with the
NO. PLATE NAME
in place of 12372
26167 2025 Presser Foot, in place of 25984
26169 Corder complete, Nos. 25792, 26166 to
26168 and two 135d
CORDER FOR TOP AND BOTTOM CORDING

This Corder is the same as 26328 with
the foiiowing exceptions:
NO. PLATE NAME
in place of 12.372
26167 2025 Presser Foot, in place of 25984
28630 1384 Throat Plate for 28629, in place of 12442
28788 Corder complete, Nos. 25792,26167,28629,
28630 and two 135d
CORDER (Bow) FOR TOP CORDING

NO. PLATE NAME
26647 2027 Corder Bow
4604 2027 " " Rivet
25789 2027 " " Tip
130 CORDERS
NO. PLATE NAME

26649 2027 Corder (bow) complete, Nos. 4604, 25789,
26647 and 26648
CORDER (Bow) FOR TOP CORDING

NO. PLATE N.\ME
^6937 1385 Corder Bow
4604 1385 " " Rivet
25789 1385 " " Tip
26938 1385 Corder (bow) complete, Xos. 4604, 25789,
26648 and 26937 '
CORDER FOR EDGE CORDING

NO. PLATE NAME
35026 2673 Corder on Shank
35028 2674' Presser Foot
35030 Corder complete, for edge cording plush,
Nos. 35026 to 35029
FELLER
NO. PLATE NAME
26403 2029 Feller (foot)
FINGER GUARD
NO. rL.\TE NAME
36818 5809 Finger Guard..;
36819 5809 " " Friction Washer
.50316J 5809 " " Hinge Screw
30820 5809 " " Holder with lOG.r
19Gj 5809 " " " Clamping Screw...
36821 5809 Finger Guard complete, Nos. 36818 to
36820 and 503161
FINGER GUARD
120496 ,5809 Finger Guard
120497 5809 " Holder with 50302j
50302.r 5809 " " " Set Screw
236j 5809 " " Screw
120498 5809 Finger Guard complete, Nos. 236j, 120496
and 120497
131
EDGE FOLDERS
NO. I'LATE NAME
28615 1397 Edge Folder with Cord Guide on Shank,

to insert and sew on insertion in one
operation "
28616 1397 Presser Foot (grooved) for 28615
28903 2782 Edge Folder (left hand) with right hand
upper guide on Shank, to turn up the
body of bobbinette curtains and sew on
insertion in one operation
28625 2627 Edge Folder (double) with Strip Folder
and Cord Tube on Shank, for inserting
cord, folding strip and stitching be
tween the two foltled edges of goods...
28626 1391 Presser Foot with groove on bottom to the
right of needle hole, for 28625
28646 2604 Edge Folder (double) on Shank, for men's
skeleton coat seams, to turn to outsirlc
28649 2604 Edge Folder on Shank
28702 2609 " " " " with Under Stri|>
Edge Folder, for strip when stitched to
project over edge of goods
28703 2609 Presser l-'oot for 28702
28709 2628 Edge Folder (double) on Shank, for canvas
28735 2616 " " on Shank, for seaming um
brellas
28767 2620
Edge Folder (double) on Shank, the under
fold to extend ,V. in. beyond edge of the
upper fold
26948 2601 Edge Foliler on Shank, to turn edge of
yoke and insert boily of shirt
28753 2618 Edge Folder and Guide on Shank, for top
fold only
12450 2690 Feed IJog, 11 teeth (18 teeth to the inch'),
for 35175
35176 2690 Pre.'sscr Foot for 35175
for 35253
35253 2693 Edge Folder (double) on Shank, for join
ing yokes to the back of shirts........
132 EDGE FOLDERS
NO. PLATE NAME
28958 2668 Edge Folder and Binder (combination) for

seaming ladies' skirts and making imi
tation plait
36292 5810 Edge Folder (double) on Shank 28971....
28972 5810 " Holder
35610 2669 " " " Friction Washer
940f 1366 " " " Hinge Screw
28973 5810 " Shank
28971 2669 « " Shank
7071 1379 " Washer.
36293 5810 Edge Folder (double) hinged, adjustable,
complete, Nos. 286d, 940f, 7071, 28792,
28973, 35610 and 36292
12369 2699 Feed Dog, 12 teeth (12teeth to the inch),
for 36293
120135 5846 Edge Folder (double) for turning in two
edges and inserting loops in one opera
tion
120197 5848 Edge Folder (upper) with lower right hand
guide on shank, for military uniforms..
FOR 31-27 MACHINE
28811 2625 Edge Folder (suspended) right hand, com

plete, for turning edge and rufflingfolded
edge on skirts
28833 2649 Edge Folder (left hand) on Shank, with
right hand upper folder and separating
blade
28862 2649 Edge Folder (double)on Shank, right hand
upper, left hand lower, with separating
blade for wrappers
28358 2624 Edge Folder (suspended) left hand, to turn
edge under
28359 1395 EdgeFolder(double)withSeparatingBlade
on Shank, lower folder,to turn the edge
of the goods under
28549 1395 EdgeFolder (doul)le)withSeparatingBlade
on Shank, lower folder, to turn the edge
of the goods up
right hand lower guide
35922 2619 Ruffling Blade for 28756
EDGE FOLDERS 133
NO. PLATE NAME

28755 2621 Edge Folder Geft hand) on Shank, with
right hand upper guide and separating
blade
2S75S 2620 EdgeFolder (double) withSeparatingBIade
on Shank, lower folder, to turn the edges
of the goods up
28760 2627 Edge Folder (right hand) on Shank, with
left hand lower guide
right hand lower guide
FOR 31-19 MACHINE

NO. PLATE NAME
35178 2692 Feed dog, 14 teeth (14 teeth to the inch)..

35177 2691 Edge Folder (double) on Shank, for oil
cloth and leather
STRIP FOLDERS
NO. PLATE NAME
28613 1396 Strip Folder on Shank, for overall shoulder
straps
28617 1398 Strip Folder on Shank, for inserting folded
strip, for trimming mantles.
28618 1398 Presser Foot (grooved) for strip, for 28617
28647 2626 Strip Folder on Shank
28W8 2626 " " " " for making straps
28698 2608 " " " " with cord tube..
28699 2608 Presser Foot (grooved) to the right of
needle hole, for 28698
28708 2611 Strip Folder on Shank, for folding strip and
stitching down centre
28764 2622 Strip Folder on Shank, with left hand upper
guide
28848 2648 Strip Folder on Shank, for folding over
all straps
28849 1387 Presser Foot with guide on bottom to the
left of needle hole, for 28848
for 35345
35346 2669 Presser P'oot for 35345
134 STRIP FOLDERS
NO. PI.ATE NAME
35345 953 Strip Folder on Shank, for making straps

35347 970 " " (double) hinged, for turning
in the right hand edges of strips, for
making strip, for 35348
35348 970 Strip Folder, for turning in the upper and
lower edges of strip, made on 35347
35349 970 Strip Folder Holder and Guide
190d 782 ""Screw
« « (( « « «
7071 2021
Washer
for 35351
35351 Attachment complete, for making two-
piece apron straps, cloth suspenders,
etc., Nos. 19474, 24572, 35347 to 35350
and two each 190d and 7071
35855 1253 Strip Folder on Shank, for collar bands..
for 35855
28728 2628 Strip Folder on Shank, to turn in the raw
edge on lower fold
120191 5845 Strip Folder on Shank, to turn in both
edges
28754 2628 Strip Folder on Shank, for suspender
straps, to turn both edges
28945 2666 Strip Folder on Shank, for making overall
straps
FOR 31-19 MACHINE

NO. PLATE NAME

35324 2684 Strip Folder onShank, for making four-ply
bands, for ladies' stock collars, etc
STRIP FOLDER (Foot)

NO. PLATE NAME
28705 2627 Strip Folder with arm
28706 2627 " " Hinge Bracket with 448c and
2273
STRIP FOLDERS 135
NO. PLATE NAME
448c 783 Strip Folder Hinge Bracket Set Screw....

96d 2038 " " " Screw
26173 2038 " " Lock Stud ;
26174 2038 " " " " Spring
228d 2038 " " " " " Screw....
2273 2038 " " Stop Pin
28707 2627 Strip Folder (foot, hinged) complete, for
folding and stitching plaits on shirt
bo.som, Nos. 96i), 228i), 26173, 26174,
28705 and 28706
GUIDES
NO. PLATE N.\ME
25866 2045 Guide, for flush throat plute

25874 2045 " " raised throat plate
35190 2697 " " 28967
25873 2045 " (comnination)
28658 1377 " (roller) with IS-Ti
1852 1377 " Roller for 28658
284u 13(i6 " Thumb Screw (long)
732d 1366 " " " (short)
3146 1353 " " " Wa.sher
28971 8211 Guide
28972 8211 « Holder.....
35610 8211 " " Friction Wa.shcr
940i) 8211 " " Hinge Screw
120427 8211 " " Shank
7071 8211 " " " \V.a.sher
120428 8211 Guide (adjustable, hinged) complete, Nos.
2861), 940i), 7071, 28971, 28972, 35610
and 120427
EDGE GUIDE
NO. PLATE NAME
28838 2650 Edge Guide (suspended) left hand, for
31-27 Machine
EDGE GUIDE (Roller)

NO. PLATE NAME
26803 1375 Edge Guide Bed with 2362

220d 1375 " " Leveling Screw
36760 1375 " " Slide with 20809, 51809 and
two 121.52
136 GUIDES
NO. PLATE NAME
26805 1375 Edge Guide Slide Cap (left)

207p 1375 " " Screw
2362 1375 " " Steady Pin..
26806 1375 " (right)
207p 1375 " " Screw (large)
233d 1375 " (smaU)
26807 1375 Lever
51809 1375 Roller and Stud
26808 1375 Spring
26809 1375 " Cover
12152 1375 " " Rivet....
26810 1375 Edge Guide (roller) complete, Nos. 94d,
233d, 26803, 26805 to 26808,36760, two
207p and four 220d
190d 1375 Edge Guide Screw
EDGE GUIDE (Roller)

FOR GLOVE WORK
NO. PLATE NAME

36185 6252 Edge Guide Arm with 1988
1425d 6252 " " « Hinge Screw
1988 6252 " " " Roller and Screw Stud..
36187 6252 " " Bed with four 465f
465f 6252 " " " Leveling Screw
36188 6252 Edge Guide (roller) complete, Nos. 1425d
and 36185 to 36187
STRIP GUIDE
NO. PLATE NAME
28712 2612 Strip Guide on Shank
HEMMERS
HEMMER
WITH LEVER FOROPENING THE FOLDER AND RELEASING THE
HEM, SO THAT IT CAN BE FINISHED WITHOUT REMOVING
THE HEMMER FROM MACHINE. FOR SKIRTS, OVERALLS,
OR SIMILAR CLOSED ARTICLES.
NO. PLATE NAME

28679 1376 Hemmer Bed with 28681.
♦28680 1376 « Folder (left)....
HEMMERS 137
NO. PLATB NAME
233d 1376 Hemmer Folder (left) Screw

2362 1376 " " « Steady Pin
28681 1376 " " (right)
28685 1376 " " Disengaging Lever
94d 1376 " " " " Hinge
Screw
2362 1376 Hemmer Folder Disengaging Lever Stop
Pin
28682 1376 Hemmer Slide with 28687 and two each
2362 and 12152
28683 1376 Hemmer Slide Cap (left)
28684 1376 " « " (right)
207f 1376 " "• " Screw (back)
233d 1376 " " " " (front)
28686 1376 " " Spring
28687 1376 " " " Cover
12152 1376 " " " " Rivet
28688 1376 Hemmer complete, Nos. 94d, 28679,28680,
28682 to 28686, two 207f and three 233d
190d 1376 Hemmer Screw
28689 " " Plate
28690 " " Shank
26231 1353 « " Spring
28691 1391 PresserFoot(springhinged) complete, Nos.
18055, 26231, 28689 and 28690
HEMMERS (Foot)
NO. PLATE NAME
28663 2028 Hemmer (foot) ^ in. hem, for 12372,

12455, 20002, 20117 and 20151
25919 Hemmer (foot) A in. hem, for 12372,
12455, 20002, 20117 and 20151
25920 2028 Hemmer (foot) in. hem, for 12372,
12455, 20002, 20117 and 20151
25921 Hemmer (foot) long, H hi. hem, for shirts,
for 12372, 12455, 20002, 20117 and
20151
25922 2028 Hemmer (foot) in. hem, for 12369 and
12457
25923 Hemmer (foot) long, tV in. hem, for shirts,
for 12369 and 12457
25924 Hemmer (foot) K in- hem, for 12369 and
12457
26428 2028 Hemmer (foot) H in- hem, for 12437 and
20147
138 IIEMMERS
NO. PLATE NAME
36085 Hemmer (foot) ,V in. hem, slotted, for lace

28664 " " ^ in. hem, slotted, for lace
28662 2028 " " K in. hem, slotted, for lace
28661 2028 " " ^ in. hem, for gusset work
28741 2028 " " H in. hem, for bagging...
28669 2606 " Spring for 28670
26459 5806 " " Rivet
28670 2606 " (foot) in. hem, with 28669 and
two 26459
28742 1388 Hemmer (foot) to make stitch in centre of
hem
26607 1387 Presser Foot Body for 26610, 26611 and
35016
35016 Hemmer, in. hem, for 26607
26610 1387 " H in. hem, for 26607
26611 " in. hem, for 26607
35539 2669 " (foot) tg in. hem, for China silk,
etc
120325 8627 Hemmer (foot) in. hem, with guide on
bottom to the right of needle hole
35682 Hemmer (foot) in. hem, with guide on
36524 Hemmer (foot) j? in. hem, with guide on
. bottom to the right of needle hole
36072 Hemmer (foot) ]4 in. hem, with guide on
for 35712
35712 1252 Throat Plate, small needlehole, for 35711,
for 35682, 35710, .35997, 36072, 36309,
30524 and 120325
Note: When ordering Xo. 35712 state width of hem

for which it is required
Nos. 36980 TO 30983 for 12437 and 20147
NO. l'L.\TE NAME
36980 Ilenmier (foot) in. hem

36981 " " -f, in. licm
36982 " " i„. hem
36983 " " '4 in. hem
139
HEMMER (Foot) ADJUSTABLE

FOR TENNIS SHOES
NO. PLATE NAME
120073 Hemmer Block with 39395

50441d 5839 it
" Hinge Screw
it
39395 5839 " Pin
120074 it
" Spring
it
651d 2011 " " Screw
t%
120075 Guide
it
50169 5839 " Screw
it
120076 Plate
it
219d 774 " Screw
tt
120077 Shank
120078 5839 Hemmer (foot) adjustable, complete, Nos.
219d, 651d, 50169d, 50441d and 120073
to 120077
HEMMER (Foot) PLAIN BOTTOM

NO. PLATE NAME
28795 Hemmer (foot) plain bottom, in. hem
26160 " " " " A in. hem
26161 2028 " " " " li in. hem
26162 " " " " ^ in. hem
26163 " " " " H in. hem
6267 2028 " Folder
25888 2028 "Tongue
Note: When ordering Nos. 6267 or 25888, state
width of hem and No. of Hemmer for
which it is required.
HEMMERS ON SHANK
NO. PLATE NAME
for 26655
12451 2689 ." " small needle hole, for 12450
26652 Hemmer, ^ in. hem, for 26655
26654 2032 " Rivet
26653 2032 " Shank
26655 2031 Hemmer on Shank complete, Nos. 26652
to 26654
26659 Hemmer for 26660
26660 2031 Hemmer on Shank complete, ^ in. hem,
for umbrella work, Nos. 26653, 26654
and 26659
140 HEMMERS
NO. PLATE NAME
26661 Henuner (wide) for 26662

26662 2031 Hemmer on Shank complete, Nos. 26653.
26654 and 26661
26664 2030 Hemmer on Shank complete, for raw edge
silk, Nos. 26653, 26654 and 26663
26665 Hemmer, H hi- hem, for 26666
26666 2030 Hemmer on Shank complete, Nos. 26653,
26654 and 26665
26934 Hemmer (narrow) for 26935
26654 and 26934
28948 1386 Hemmer on Shank complete, for one fold,
with right hand lower guide, for lace,
Nos. 26653, 26654 and 28947
36520 Hemmer, in. hem, for 36521
26654 and 36520
36711 Hemmer in. hem, for 36712
36712 5811 Hemmer on Shank complete, for umbrella
work, Nos. 26653, 26654 and 36711....
28623 2602 Hemmer and Corder on Shank, to take
goods from above to cord bottom
28627 2600 Hemmer on Shank, for 3^8 in. hem, for
Marseilles quilts
28650 2604 Hemmer on Shank, for hemming heavy
Canton flannel
28651 2605 Hemmer on Shank, for turning tops and
bottoms of canvas leggins
28652 2605 Hemmer on Shank, for 1-^ in. to 2 in. hem
28653 " " " 2t% in. to 3 in. hem
28700 2609 " (short head) on Shank, for hem
ming stable blankets
28701 1391 Presser Foot (tube) for laying braid on
stable blankets, for 28700
36589 Presser Foot for 28700
28710 2612 Hemmer on Shank, for in. hem
120337 8210 " " " K in. to in.
hem, for bottom of shirt waists
28711 2607 Hemmer on Shank, for ^ in. hem, for hem
ming towels
28719 2613 Hemmer on Shank, for ]4.in. to 3^ in. hem
120287 2613 Hemmer
HEMMERS 141
NO. PLATE NAME
120288 2613 Hemmer Shank

28720 2613 Hemmeron Shank, % in. to 1 in. hem, com
plete, Nos. 120287 and 120288
120338 8625 Hemmer, for 120340
120339 8625 " Shank for 120340
1443J 8625 " " Screw
120340 8625 Hemmer on Shank complete, for in. to
2 in. hem, Nos. 120338, 120339 and two
1443J
28721 Hemmer on Shank, 11^ in. to 2 in. hem...
36776 " " " 2)4 in. to 3 in. hem...
28722 2613 " " " for heavy woven goods
28723 2614 " " " with guide, for hem
ming and stitching on lace in one opera
tion
120367 8630 Hemmer on Shank, for handkerchiefwork
28736 2617 " " " " umbrella work...
28737 2615 " " " " soft material, to
turn the hem under
28738 2617 Hemmer on Shank, % in. hem, to turn the
hem under
28739 2626 Hemmer on Shank, 3 in. hem, for sheets
and pillow slips, to turn the hem under
28935 2661 Hemmer on Shank,for bobbinette material,
to turn the hem under
35022 1386 Hemmer on Shank, for ^ in. hem, with
right hand lower guide for lace
right hand lower guide for lace
35023 2672 Hemmer on Shank, for -,V in. hem, with
left hand lower guide for lace
120452 2672 Hemmer on Shank, for ^ in. to M in.
gauges, for Windsor ties
35064 2631 Hemmer on Shank, for 1 in. to 2 in. hem,
for general work
35104 2684 Hemmer on Shank, for bottom of shirt
waists, for inserting drawing or shirring
string
35063 Presser Foot, for light work, for 35104...
2676
35832 2669 " " " heavy work, for 35104..
35166 2694 Hemmer on Shank, for 1 in. hem, to turn
the goods under
the goods under
for 35236
142 HEMMERS
NO. PLATE NAME
35063 2676 Prc'sser Foot for 35236

35236 1971 Hemmer on Shank, for ^ in. hem and
above, for bottom of shirt waists
for 35241
7298 2014 " " Hinge Pin
120143 " Plate
19335 " Shank
120144 5847 Presser Foot (hinged) complete, for 35241,
Nos. 7298, 19335 and 120143
35241 2695 Hemmer on Shank, for Canton flannel, etc.
26603 5644 Feed Dog, 20 teetli (16 teeth to the inch)
35863
35863 5644 Hemmer on Shank, for canvas work
35679 932 " Folder on Shank for 35681
35353 932 " " Hinge Plate for 35681...
1425d 932 " Screw
30006 932 " " " " Washer for
35681
35681 932 Hemmer on Shank (hinged) complete, for
mattress work, Nos.. 1425d, 35353,
35679 and 36006
26603 932 Feed Dog, 20 teefii (16 teeth to the inch)
for 3.'5681
35066 032 Presser T'oot for 35681
FOR 31-27 MACHINE

NO. PLATE NAME
28777 2623 Hemmer (double) on Shank, for headings

28778 2623 Pre&ser Foot for 28777
35700 976 Hemmer (left hand) with right hand lower
guide on Shank
HEMSTITCHER
NO. PLATE
28671 1392 Hemstitcher.
143
LAP SEAM FELLER

NO. PLATE NAME
28673 2607 Lap Seam Feller (right hand) on Shank,
to fold top only
28674 2607 Lap Seam Guide on Shank
PRESSER FEET
NO. PLATE NAME
25985 2029 Prcsser Foot (single toe) for gathering...
26638 2029 " " (double toe) for gathering...
26639 " " with 228d, for 26641
26640 2029 " " Adjustable Guide for 26641
228d 2038 " " " " ScreAV....
26641 2029 " " 26639 with Adju.stable Guide
No. 26640, for tailor work
26642 Presscr Foot
26643 2029 " " Guide
26644 5843 " " " Hinge Pin
26645 5843 " " " Spring
337d 1388 " " " " Screw
26646 2029 Presser Foot (spring guide) complete, Nos.
337d and 26642 to 26645
26650 2029 Prcsser Foot, for braiding
26651 2032 " " " folding umbrella straps
725d 1387 " " " " Screw....
26802 1387 " " with two adjustable guides,
Nos. 26801 and two 725i)
26936 1387 Prcsser Foot, for etching
26978 1391^ " " GraduatedAdjustableGuide
for 26977
335d 1317 PresserFoot, Graduated AdjustableGuide
Screw
26977 1391 Prc.sser Foot with Graduated Adjustable
Guide, No. 26978 and 335d, for tailor
work
28668 2606 Presser Foot (strip folding)
28672 1391 " " two grooves to the right of
needle hole, for cording
28675 1391 Presser Foot (pointed toe) for stitching
box plaiting on body of material
28714 2611 Presser Foot (strip folding) for shirt-Avaist
work
28715 1391 Presser Foot (tube) for laying fringe-edged
braid
144 PEESSER FEET
NO. PLATE NAME
28716 2610 Presser Foot (strip folding) for raw edge

strip, to turn edges under, for making %
in. to 1 in. strip
35877 Presser Foot (strip folding) for raw edge
strip, to turn edges under, for making
l^V in. to 2 in. strip
28725 1388 Presser Foot Spring Guide
665d 1388 " " " " Screw
28726 1388 " " (righthandspringguide)with
665d and 28725, for ^ in. to H in.
gauge
Note: When ordering Nos. 28725 or 28726 state

required distance from edge of
goods to seam.
28743 1388 Presser Foot (grooved) with tube, for cord
ing
28744 1389 Presser Foot (strip folding) grooved, with
two cord tubes, for making double corded
strip
28745 1389 Presser Foot (strip folding) to fold both
edges of strip
28746 1388 Presser Foot (tube) for guiding and stitch
ing the left hand edge of ribbon
28747 1389 Presser Foot, bias binding, the velveteen
to project in
28768 1390 Presser Foot (strip folding) for folding a
2Yzin. strip to a 1 in. strip, to be stitched
on shirt bosoms for imitation tuck
28830 1387 Presser Foot (grooved) for cording, for
carriage work
28908 2658 Presser Foot Spring Guide for 28909
665d 1388 " " " " Screw
28909 2658 " " (left hand spring guide) with
665d and 28908
28920 1387 Presser Foot, for braiding, to stitch braid
on right hand edge
28944 2665 Presser Foot (strip folding) for making
raw edge straps of bias chiffon
for 28967
35190 2697 Guide for 28967
28965 2658 " " Knife
28966 2658 " " " Clamp
198d 2658 " " " « Screw
15072 2658 " " " " Steady Pin....
PRESSER FEET 145
NO. PLATE NAME
28967 2658 Presser Foot complete, for grooving in

soles, Nos. 198d, 15072 and 28964 to
28966
35191 2697 Throat Plate, for under braiding, for 35189
24488 " Plate
19223 " " Shank
24489 5837 Presser Foot (hinged) complete, for heavy
work, Nos. 19223, 24488 and 62527....
28770 Presser Foot
28771 1388 " " Guide
15072 1388 " " " Hinge Pin
28772 1388 " " " Spring
337d 1388 " " " " Screw
2113 1388 " " " " Steady Pin...
28773 1388 Presser Foot (spring guide) for gores, Nos.
337d, 2113, 15072 and 28770 to 28772..
35129 2682 Presser Foot (strip folding) for covering
cord with folded strip
35184 2682 Presser Foot, for darning
35172 2682 " " (tube) for guiding and stitch
ing the right hand edge of ribbon
for 35243
35243 2698 Presser Foot (strip folding) with tube, for
inserting cord, for makingloops, fordrcss-
ing gowns
straps from 1 in. to 1)^ in. wide
44159 " " Plate
44160 " " Shank
44161 5842 Presser Foot (hinged) complete, Nos. 26276
44159 and 44160
35995 5645 Presser Foot with right hand folder, for
folding and stitching facing to shoe
lining
36022 5645 Presser Foot with 665d and 36023, for blind
stitch cording, for 12 to 40 ligne cord, for
ornamental cording on skirts, suits, etc.
36023 5645 .Presser Foot Cord Guide for 36022
Note: When ordering Nos. 36022 or 36023 state
the size or send sample of cord for which
it is to be used.
146 PRESSER FEET
NO. PLATE NAME
665d 5645 Presser Foot Cord Guide Screw

36182 5808 " " with665Dand36183,forblind
stitch braiding, for soutache braid
36183 5808 Presser Foot Braid Guide
Note: When ordering Nos. 36182 or 36183 send
sample of braid for which it is to be used.
665d 1388 Presser Foot Braid Guide Screw
36622 5808 " " for 36623
36623 5808 " " 36622 with 36576 and two
50202D
36576 5808 Presser Foot Finger Guard
50202D 5808 " " " " Screw
PRESSER FOOT (Glass Plate)

NO. PLATE NAME
26607 1387 Presser Foot Body

26608 1387 " " Plate (glass)
26609 Presser Foot (glass plate) complete, Nos.
26607 and 26608
PRESSER FEET WITH GRADUATED

ADJUSTABLE GUIDES
NO. PLATE NAME
28949 Presser Foot

28950 2658 " " Graduated Adjustable Guide
28951 2671 " " " " "
Clamping Lever
2653 2671 Presser Foot Graduated Adjustable Guide
Clamping Lever Hinge Pin
Clamping Lever Spring
Clamping Lever Spring Rivet
28953 2658 Presser Foot with Graduated Adjustable
Guide complete, for tailor work, Nos.
2653, 26092 and 28949 to 28952
35002 2671 " " Extension
(long, left)
(long, right)
(short, right)
PRESSER FEET 147
NO. PLATE NAME

(short, right) flush
Clamp
Clamp Lever
337b 2671 Presser Foot Graduated Adjustable Guide
Clamp Screw
Clamp Steady Pin
35137 Presser Foot with Extensionand Graduated
Adjustable Guides complete, Nos. 337b,
35002 to 35006, 35134 to 35136 and
36696
FOR 31-27 MACHINE

NO. PLATE NAME
28761 1390 PresserFootwith219Fand28762,forstitch-

ing ribbon and net material
28762 1390 Presser Foot Ribbon Guide
219f 774 " " " " Screw
PRESSER FOOT EXTENSIONS

NO. PLATE NAME
12435 780 Presser Foot with 228o
62527 5806 " " Hinge Pin
20155 " " Plate
20156 " " Shank
20157 780 Presser Foot (hinged) complete, Nos. 228d
20155, 20156 and 62527
26279 Presser Foot Extension, ^ in., for 12435
and 20157
26280 Presser Foot Extension, in., for 12435
and 20157
26281 1387 Presser Foot Extension, in., for 12435
and 20157
26282 Presser Foot Extension, ?8 in-> for 12435
and 20157
26283 ^ Presser Foot Extension, in., for 12435
and 20157
228d 2038 Presser Foot Extension Screwfor 12435and
20157
44159 " " Plate
44160 " " Shank
148 PRESSER FEET
NO. PLATE NAME
44161 5842 Presser Foot (hinged) complete, Nos. 26276,

44159 and 44160
PRESSER FOOT STRIP GAUGE

NO. PLATE NAME
12435 780 Presser Foot with 228d

62627 5806 " Hinge Pin
20155 " Plate
20156 " Shank
20157 780 Presser Foot (hinged) complete, Nos. 228d,
20155, 20156 and 62527
25967 1387 Presser Foot Strip Gauge for 12435 and
20157
228d 2038 Presser Foot Strip Gauge Screw
PIPING ATTACHMENTS
NO. PLATE NA.ME
28621 1397 Piping Attachment and Strip Folder on

Shank, for car seat cushions
28740 2617 Piping Attachment on Shank
28803 2619 " " for flannel,
without cord
for 35245
44256 Throat Plate for 44253
36129 5812 " " (double adjustable) on
Shank with upper edge folder
QUILTERS
NO. PLATE NAME
28659 1392 Quilter Guide for 28660

25992 1392 " " Holder with two 207p, for
25992
207f 2021 Quilter Guide Holder Set Screw
207p 2021 " " Set Screw
28660 1392 Quilter complete, Nos. 25992 and 28659..
QUILTERS 149
NO. PLATE NAME
120479 8212 Quilter Guide (left)

120480 8212 " " (right)
120481 8212 " " Bracket
120482 " " " 120481 with 120483
and two 209c
120483 8212 Quilter Guide Disengaging Sleeve
120484 8212 " " " " Spring
602d 8628 " " " "
Screw
209c 8628 Quilter Guide Set Screw
120485 Quilter complete, Nos. 602d, 120479,
120480.120482 and 120484
RUFFLERS
RUFFLER (Power)
no. PLATE NAME
26005 984 Driving Lever
69d 5742 " " Hinge Screw
35019 984 " " Spring
1666d 984 " " " Adjusting Xut
26007 984 Foot
207f 2021 " Screw
26016 984 Frame
26017 984 Needle Clamp with 808f
808f 782 " " Screw
26010 984 Ruffling Blade with 8505
81 In 5742 " " Hinge Screw
26011 984 " " Lever with 26189 and 26629
812d 984 " " " Adjusting Thumb
Screw
1621e 984 Ruffling Blade Lever .Adjusting Thumb
Screw Nut
26629 2014 Ruffling Blade Lever Protector
26189 2014 " " " " Rivet....
8505 773 " " Rivet
26018 984 Rtiffler complete, Nos. 69n, 207f, 81 Id,
812n, 1021e, 1666d, 26005,26007,26010,
26011, 26016, 26017 and 35019
RUFFLER (Power)
NO. PL.ATE NAME
150 RUFFLERS
NO. PLATE NAME
25998 984 Driving Lever Spring

1582d 984 " " " Adjusting Nut
25993 984 Frame with 25994 to 25996 and 26001...
25995 2014 " Block
25996 2014 " " Rivet
25994 2014 " Stud
207k 2021 " " Set Screw
26718 1370 Needle Clamp Body
1943 1370 " " Roller
1115f 1370 " " Screw
26719 984 Needle Clamp complete, Nos. 1115p,1943
and 26718
25999 984 Ruffling Blade
26002 2014 " " Clamp
337d 1388 " " " Screw
26000 984 " " Lever
500b 984 " " " Adjusting Thumb
Screw
1603e 984 Ruffling Blade Lever Adjusting Thumb
Screw Nut
26001 2014 Ruffling Blade Lever Stop Pin
26229 984 " Presscr Foot
26230 984 Ruffler complete, No.s. 69d, 207f, 560b,
1582d, 1003e, 25993, 25997 to 26000,
26002, 26229, 26719 and two 337d
RUFFLER (Power)
WITH RIGHT AND LEFT GUIDES WITH SEPARATING BUDES
AND DISENGAGING LEVER TO THROW RUFFLING RUDE
OUT OF ACTION.
NO. PLATE NAME

1101c 2035 " " Hinge Screw
266GS 2035 " " Spring
1640c 2035 " " " Adjusting Nut
26669 2035 Frame
26670 2034 Guide (left) with 26679 and two 662d... .
26671 2035 " (right) with 26679 and two 662d. .
223d 2035 " Screw
1943 2034 " Roller
1115k 2034 " " Screw
26719 2034 Needle Clamp complete, Nos. 1115f, 1943
and 26718
RUFFLERS 151
NO. PLATE NAME
26676 2035 Ruffling Blade Clamp

337d 2035 " " " Screw
26723 2034 " " Lever
812B 2035 " " " Adjusting Thumb
Screw
1621E 2035 Ruffling Blade Lever Adjusting Thumb
Screw Nut
26678 2035 Ruffling Blade Lever Disengaging Lever
102i) 2035
Hinge Screw
2301 2035 Ruffling Blade Lever Disengaging Lever
Stop Pin
662i) 2035 " " Screw
26724 2034 Ruffler (:omi)lcte, Nos. 102i), 223i), S12b,
1101c, 1()21e, in-lOc, 2301, 26608 to
20671, 20075, 20070, 20078, 20719,
20722, 20723 and two 337d
RUFFLER (Power)
WITH LEVER FOR THROWING RUFFLING BLADE INTO ACTION,
FOR INTERMITTENT RUFFLING, SUCH AS YOKING
SHIRTS. ETC.
NO. PLATE NAME

1101c 1371 " " Hinge Screw
1647c 1371 " " " " Nut
28591 1371 " " Spring
28592 1371 " " " Collar
28593 1371 Frame
1943 1370 " " Roller
1115k 1370 " " Screw
26719 1370 Needle Clamp complete, Nos. 1115k, 1943
and 20718
28594 1371 Presser Foot (left)
185!i 1371 " " " Screw
62527 5806 " " (right) Hinge Pin
28813 1371 " " " Plate
28596 1371 " " " Sh:mk
28597 1371 " " " " Cap
198d 1371 " " " " " Screw...
2656 1371 " " " " Spring
706d 1371 " " " " Stop Screw...
2521 1371 " " " Spring
152 RUFFLERS
NO. PLATE NAME
28814 Presser Foot (right) complete, Nos. 2521,

28596, 28813 and 62527
24203 1371 " Holder
226d 1371 " Cap Screw
24204 1371 " Spring
24205 1371 " Stop
24206 1371 " " " Stud
1550h 1371 " " " " Nut
28607 1371 " Stop
28600 1371 " Lever
560b 1371 " " " Adjusting Thumb
Screw
1603E 1371 Ruffling Blade Lever Adjusting Thumb
Screw Nut
1049d 1371 Ruffling Blade Lever Stop Screw
665d 1371 " " Screw
28601 1371 Starting Lever with 190d
190d 1371 " " Clamping Screw
28816 1370 Ruffler complete, Nos. 185h, 226d, 560b,
706d, 1049d, 1101c, 1550h, 1603e, 1647c,
2656, 24203 to 24206, 26719, 28590 to
28594,28597,28600,28601,28607,28814,
for 28816
28605 1372 Edge Folder (upper, right hand) with left
hand lower guide and separating blade
on shank, to fold top band only, for
making yokes, for 28816
28818 1372 Double Edge Folder (right hand) with
separating blade, for ruffling shirt body
and putting in yokes, for 28816
SEAMERS
NO. PLATE NAME
26657 Seamer, for umbrella work
26361 " Edge Guide
26654 2032 " Rivet
26653 2032 " Shank
26658 2032 Seamer complete, Nos. 26361,26653,26654
and 26657
153
SEPARATING BLADE (Hinged)

FOR 31-27 MACHINE
NO. PLATE NAME

35272 2061 " " Arm
35273 2061 " " " Bracket
76d 2061 " " " Hinge Screw
35274 2061 " " " Latch Lever with
35275
102d 2061 Separating Blade Arm Latch Lever Hinge
Screw
10135 2061 Separating Blade Arm Latch Lever Spring
239d 2061 " " " " " "
Screw
35275 2061 Separating Blade Arm Latch Lever Stud.
35276 2061 " " Holder
102d 2061 " " " Hinge Screw...
35277 2061 " " " Spring
108d 2061 " " " " Screw...
4604 2061 " " " " Stop Pin
14026 2061 " " " Stop Pin
337d 2061 " " Screw
35280 Separating Blade (hinged) complete, Nos.
76d, 108d, 4604, 10135, 14026, 35272 to
35274, 35276, 35277, 35279, two each
102d, 239d and 337d
35283 2062 Edge Folder (lower) right hand, on Shank
35284 2064 " " (upper) left hand
217f 2061 " " Screw
35282 2064 " Guide (upper) left hand
217f 2061 " " " Screw
THROAT PLATES
NO. PLATE NAME
28342 1383 ThroatPlatewith337Dand26080,forl245.0,
for under braiding
26080 1383 Throat Plate Needle Hole Plate for 26760
and 28342
337d 1383 Throat Plate Needle Hole Plate Screw...
154 THROAT PLATES
NO. PI,.\TIO .V.AMK

and 44253
2C7G0 1383 Throat Plate, with 337i) and 20080, for
under braiding, for 44252 and 44253...
30900 5813 Throat Plate with under guide, for rick
rack, for 19474
TUBULAR TRIMMING ATTACHMENT

NO. rl-.VTK N.XMK
35879 5043 Strip Wire

35880 5043 Feed Dog, 0 teeth (10 tectli to the inch)..
35881 5043 Pres.«er Foot (strip folding) with tube....
35018 5043 Tape Delivery Wire
35883 Tuludar Triinining Attachment complete,
for making ) s •»-, h i». Jiud -I'g in. trim
mings, Xo.«. 35018 and 35879 to 35882
Note: When ordering No. 35883, .state size required.
TUCKER
NO. IM.ATE NAME

30050 8213 " " Hinge Stud
30057 8213 " Lock Spring
30058 8213 " Rivet
120500 8213 Frame
20718 1370 Needle Clam|) Body
1943 1370 " Roller
1115f 1370 " " Screw
20719 984 Needle Clamp complete, Nos. 1115f, 1943
and 20718
30000 8213 Tuck (Juidc
50238U 8213 " " Thtiml) Screw
30(>()1 8213 " Washer
30002 8213 " Marker (lower)
30003 " " 30002 with 30004
and two 30048
30004 8213 Tuck Marker (jipper"*
120572 8213 " " Clamping Plate
5023Sn 8213 " T h u m b
Screw
30048 8213 Tuck Marker Rivet
30007 8213 " Smoothing Spring
TUCKER 155
NO. PLATE NAME
86354 8213 Tuck Smoothing Spring Rivet

36561 8213 Tucker complete, Nos. 26719, 36655 to
36657, 36660, 36661, 36663, 36667,
120500, 120572 and two each 36658,
50238b and 86354
TUCKER (Power)
NO. PLATE NAME
26099 2037 Bed
26100 2037 Cloth Guide
26101 2037 " " Slide with 26102 and two
26092
4604 2038 Cloth Guide Slide Rivet
401b 2038 " " " Screw
36378 2037 Leveling Plate
26368 2037 Tuck Marking Bar
26369 Tuck Marking Bar complete, Nos. 26368
and 26370 to 26372
26105 2037 Tuck Marking Bar Bracket
26106 2038 " " " " Hinge Pin....
220d 2038 " " " " " " Set
Screw
26107 2037 Tuck Marking Bar Lifting Spring
26108 2037 " " " Pressure Spring
26109 2037 " " " " " Clamp
with 196f
196f 2038 Tuck Marking Bar Pressure Spring Clamp
Set Screw
334d 2038 Tuck Marking Bar Set Screw
26370 2038 " " Pin
26371 2038 " " " Guide Pin
26372 2038 " " " Spring
26102 2037 " " Plate
26092 2038 " " " Rivet
26111 2037 " Smoothing Spring
4604 2038 " " " Rivet
26377 2037 Tucker complete, Nos. 220d, 291 d, 334d,
401E, 12143, 26099 to 26101, 26105 to"
26109, 26111, 26369, 26378 and three
4604
176d 2038 Tucker Screw
156
TUCKER (Long Arm)

NO. PLATE NAME

26569 2635 " " Slide
7071 2021 " " " " " Washer
26597 Edge Guide complete, Nos. 287d, 7071,
26508 and 26509
26570 2034 Tuck Guide Plate
26571 2034 " " " Arm with 5944
5Sd 782 " " " " Hinge Screw
20084 2634 " " " Bracket
732i) 1306 " " " " Thumb Screw
5944 5843 " " " Guide Pin
2S7d 783 " " " Thumi) Screw
7071 2021 " " " " " Washer.
20083 TuckGuidePlatccomplete, Xos.58i),287d,
732d, 7071, 20570, 26571, 26084 and two
wood screws 1 in. Xo. 12
20085 Tucker complete, Xo.s. 939i), 20597, 20683
and 206S0.
Xote: Bed Frame 20007 is u.sed with, but not
included in, 2(5085.
WELT GUIDE
(ADJUSTABLE) WITH SWITCH
NO. PLATE NAME
26143 2039 Bed

20144 20.39 Cap
23Si) 2039 " Screw
20145 2039 Carrier
20140 " Slide
20344 2039 " " Stop
240t) 2039 " " " .Adjusting Screw
20147 2039 " Tongue
20148 Carriercompletc, Xos.233D,20145to20147
and 20149
26138 2039 Carrier Slide Switch Cam with Shaft
26139 2039 " " " " Shaft Head
with Lever with 337i)
337d 2039 Carrier Slide Switch Cam Shaft Head Set
S<a-ew
910f 2039 Welt Guide .Adjusting Screw
WELT GUIDE 167
NO. PLATE NAME
26149 2039 Width Guide

233d 2039 " " Screw
26160 2039 Welt Guide complete, Nos. 240d, 910f,
26138, 26139, 26143, 26144, 26148,
26344 and three 238d
190d 782 Welt Guide Screw
7071 2021 " " " Washer
1928 2039 Roller, in. diam., fine, with 386d and
1628D
16673 2039 Roller Arm
386d 6842 " " Screw
1628d 6842 " " " Nut
19394 Roller Presser complete, 1}4 in, fine roller,
Nos. 1928 and 16673
Note; Presser Foot 26681 and Roller Presser 19394
are used with, but not included in, 26160
BOBBIN WINDERS
BOBBIN WINDER
FOR 4370
NO. PLATE NAME
16072 2014 Bobbin Position Pin

12168 2003 Bracket
692d 783 " Screw
12169 2003 Frame
12171 2003 Frame complete, Nos, 333d, 6960, 6961,
6963, 12169 and 16077
32d 782 Frame Hinge Screw
6960 768 Friction Wheel (leather)
6961 768 " " Washer
333d 782 " " " Screw
16077 773 Spindle with 16072
6963 768 " Flange
12170 773 Spring
180p 782 " Screw
12172 Bobbin Winder complete, Nos. 32d, 180f,
12168, 12170 and 12171
158
BOBBIN WINDER
FOR 2135 AND 2862
This Bobbin Winder is the same as 12172 with the

foilowing exceptions:
NO. PLATE NAME
12201 2003 Frame complete, Nos. 333d, 5960, 5961,

5963,12169 and 15077, in place of 12171
12202 Bobbin Winder complete, Nos. 32d, ISOf,
12168, 12170 and 12201
BOBBIN WINDER
FOR 12358

foliowing exceptions:
NO. PLATE NAME
20307 2020 Frame, in place of 12169
20308 Frame complete, Nos. 333d, 5960, 5961,
5963,15077 and 20307, in place of 12171
20309 Bobbin Winder complete, Nos. 32d, 180i",
12168, 12170 ami 20308
BOBBIN WINDER
(HAMBURG)
FOR 2135 AND 2882

foliowing exceptions:
NO. PLATE NAME
43982 6119 Frame complete, Nos. 5960, 5961, 5963,
12336, 15077 and 43981, in place of
12171
12336 2003 Spindle for spool, in place of 333d
12168, 12170 and 43982
BOBBIN WINDER
(HAMBURG)
FOR 4370

NO. PLATE NAME
BOBBIN WINDERS 159
NO. PLATE NAME
43983 6119 Frame complete, Nos. 5960, 5961, 5963,

12336,15077 and 43981, in place of 12171
12336 2003 Spindle for spool, in place of 333d
12168, 12170 and 43983
BOBBIN WINDER
(SWINGING AUTOMATIC, RIGHT HAND)
FOR 2996
FOR POWER TABLE
NO. PLATE NAME
27552 1162 Base

15072 2014 Bobbin Position Pin
27302 1162 Frame
1620J 5808 " Nut
27303 773 " Spring
27553 1162 Pulley
♦27849 Spindle
27538 1162 " 27849 with 15072,27850 and 41828
♦27850 " CoUar
41828 " " Pin
27306 1162 Spool Pin
27307 1162 " Stand
27308 1162 Spool Stand complete, Nos. 418e, 1562j,
2106, 10141, 11241, 27306, 27307 and
twoeach 2455 and wood screws lin. No. 10
11241 2003 Spool Washer (cloth)
27312 2003 Stop Latch
1562J 2014 " Regulating Thumb Nut
418e 2014 Screw Stud
10141 2014 " Spring
2106 2014 " Thread Guide
27650 Bobbin Winder, Nos. 35d, 1620-1, 27302,
27303, 27312, 27538, 27552, 27553,
50356d and two wood screws 1 in. No. 7
27554 Bobbin Winder (swinging automatic, right
hand) complete, Nos. 27308 and 27650
160
BOBBIN WINDER
FOR 2996
FOR STAND
foilowing exceptions:
NO. PLATE NAME
27540 2445 Base, in place of 27552

27541 2445 Pulley, in place of 27552
27647 2445 Bobbin Winder, Nos. 35d, 1620j, 27302,
27303,27312,27538,27540,27541, 50356d
and two wood screws 1 in. No. 7, in
place of 27650
BOBBIN WINDER
FOR 19131
FOR POWER TABLE
NO. PLATE NAME
27587 1162 Stop Latch, in place of 27312

27651 1162 Bobbin Winder, Nos. 35d, 1620j, 27302,
27303, 27538, 27552, 27553, 27587,
50356o and two wood screws 1 in. No.
7, in place of 27650
27588 Bobbin Winder (swingingautomatic, right
BOBBIN WINDER
(SWINGING AUTOMATIC. RIGHT HAND)
FOR 19131
FOR STAND
NO. PLATE NAME
27540 2445 Base, in place of 27552
27541 2445 Pulley, in place of 27553
27587 1162 Stop Latch, in place of 27312
27875 Bobbin Winder, Nos. 35d, 1620j, 27302,
27303, 27538, 27540, 27541, 27587,
50356d, and two wood screws 1 in. No.
7, in place of 27650
161
BOBBIN WINDER
FOR 2936, 19131 AND 24051
FOR POWER TABLE
NO. PLATE NAME

225433 3469 Bobbin Winder and Tension Bracket Base
225453 3470 Frame with 202277 and 225438
225454 3471 " Hinge Pin
202277 3471 " Oil Packing (wick)
225438 3471 " " Well Cap
225455 3471 " Spring
225456 3471 " " Plunger
202473 3470 Pulley with 200105c
200105c " Set Screw
225381 3470 Spindle
225444 3471 Stop Latch
200056E 3471 " " Screw
225458 3471 " " Thumb Lever
225459 3471 " " " " Hinge Stud....
225460 3471 " " " " Joint Stud
202478 3471 " " Trip Lever
2002g9H 3471 " " " " Hinge Screw
225461 3471 Tension Bracket with 201499b
200082D 3471 " " Screw
228026 " " " Washer
2102 3471 " Disc
202407 3471 " Spring
201499b 3471 " Stud
201572b 3471 " " Thumb Nut
225462 Tension Bracket complete, Nos. 201572b,
202407, 225461 and two 2102
225382 3469 Bobbin Winder (swinging automatic, right
hand) complete, Nos. 200056e, 200082d,
200299H,202473,202478,225381,225433,
225444, 225453 to 225456, 225458 to
225460, 225462, 228026 and two wood
screws ^ in. No. 13 R. H. B
DRIVING ATTACHMENT
FOR 31-15, 31-16, 31-19, 31-27, 31-32, 31-34, 31-35
AND 31-39 MACHINES
NO. PLATE NAME

16592 818 Balance Wheel (friction) with 7958,16524
and two 435c
16524 Balance Wheel Friction Ring (leather)...
162 DRIVING ATTACHMENT
NO. PLATE NAME
7958 5741 Balance Wheel Friction Ring Stop Pin...

24355 5757 " Oil Cover
210d 5742 " " Screw
435c 5742 " " Set Screw
16514 768 Bobbin Winder Frame
16515 768 BobbinWinder Frame complete,Nos. 333d,
5960, 5901, 5963, 15077 and 10514
5960 768 Bobbin Winder Friction Wheel (leather)..
5961 768 " Washer
« a u a
333d 782
Screw
15072 2014 Bobbin Winder Position Pin
15077 773 " " Spindle with 15072
5903 708 " Flange
27300 1102 " Spool Pin
27307 1162 " Stand
27308 1102 Bobbin Winder Spool Stand complete,
Nos. 418e, 1502.1, 2106, 10141, 11241,
27300, 27307 and two each 2455 and
wood screws 1 in. No. 10
11241 2003 Bol>bin Winder Spool Washer (cloth)... .
12170 773 " " Spring
180P 782 " Screw
16516 774 " " Stop Latch with 152f and
1550h
152f 782 Bobbin Winder Stop Latch Adjusting
Screw
1550h 783 Bobbin Winder Stop Latch Adjusting
Screw Nut
75d 782 Bobbin Winder Stop Latch Hinge Screw
27303 773 " Spring
2209 773 " Stop Pin
2455 2014 " " Tension Disc
1562J 2014 " " " Regulating
Thumb Nut
418e 2014 Bobbin Winder Tension Screw Stud
10141 2014 " Spring
16530 818 Bracket
092d 783 " Screw
Drop Feed Machine
power table, for Wheel Feed Machines
16518 818 Driving Arm with2269,2928andtwol5132
2928 774 " " Brake (leather)
DRIVING ATTACHMENT 163
NO. PLATE NAME
15132 773 Driving Arm Brake Rivet

12178 774 " " Friction Plug (wood)
427e 783 " " " " Adjusting
Screw
1508c 783 Driving Arm Friction Plug Adjusting
Screw Nut
693d 782 Driving Arm Hinge Screw
1579c 783 " « " " Nut
12475 818 " " Pitman
20371 768 " Crank
2022 773 " Pin
20372 768 " Spring
16522 Driving Arm complete, Nos. 32d, 75d,
180f, 427e, 693d, 1508c, 1579c, 12170,
12178, 16515, 16516, 16518, 16530 and
27303
16594 818 Driving Friction Pulley, 2^ in. diam.,
with 861d and 10236
10236 774 Driving Friction Pulley Centre Bearing..
861d 5742 " Oil Hole Plug
Screw
27072 Shaft Driving Pulley (sectional grooved)
12 in. diam., 1^ in. bore with two 597c
597c 2011 Shaft Driving Pulley Clamping Screw
12479 768 Starting Crank
2022 773 " " Pin
12477 768 " " Shaft
♦44176 " " " 12477 with 12479,
20371 and two 2022
126036 8497 Treadle
126205 8629 " Bracket (left)
126206 8629 TreadleBracket (left) complete, Nos.23258,
126205, 126207, 126208 and two wood
screws 1 in. No. 14
126207 8629 Treadle Bracket (left) Hook
23258 8628 "Friction
Washer
126208 8633 Treadle Bracket (left) Hook Rivet
46681 8497 " " (right)
60502 " " " 46681 \vith two
wood screws 1 in. No. 14 ,
27637 818 Treadle Pitman Rod (lower)
27638 5841 " " " " Spring
6055 5741 « « " " " Washer
14081 818 « " (upper)
164 DRIVING ATTACHMENT
NO. PLATE NAME
9079 5844 Treadle Pitman Rod (upper) Clamp with

354c
354c 774 Treadle Pitman Rod (upper) Clamp Screw
14233 818 Treadle Pitman complete, Nos. 2762,6055,
14081, 27637, 27638 and two 9079
126209 Treadle complete, Nos. 60502,126036 and
126206
126213 Treadle and Pitman complete, Nos. 14233
and 126209
2762 1206 Treadle Stop Collar with 362f
362f 2009 " Set Screw
12478 Driving Attachment with Bobbin Winder
and Treadle complete, Nos. 210d, 692d,
12475, 16522, 16592, 16594, 20372,
24355, 27072, 27308, 44176, 126213 and
two 65d
DRIVING ATTACHMENT
FOR 31-20, 31-22 AND 31-24 MACHINES
This Driving Attachment is the same as 12478 with

NO. PLATE NAME
19258 2009 Bobbin Winder Stop Latch with 152f and

1550ii, in place of 16516
19260 Driving Arm complete, Nos. 32d, 75d,
180f, 427e, 693i), 1508c, 1579c, 12170,
12178, 16515, 16518, 16530, 19258 and
27303, in place of 16522
and Treadle complete, Nos. 210d, 692d,
12475, 16592, 16594, 19260, 20372,
24355, 27072, 27308, 44176, 126213 and
two 65d
FOOT LIFTER PARTS

NO. PLATE NAME
5596 768 Bell Crank

56848 " " 5596 with 5599 and 5601
5599 768 " " Bracket
178b 782 " " " Screw
5601 773 " " Hinge Pin
5735 1353 " " Spring
5598 768 Bell Crank complete, Nos. 5735 and 56848
FOOT LIFTER PARTS 165
NO. PLATE NAME
6670 Chain, length 26 in. to 35 in

Note: When ordering 5670, state length required.
4879 2004 Chain Connecting Link for 4885
12237 766 Lifting Lever with 448c, for 20008 and
20290
20340 2049 Lifting Lever with 448c, for 43928 and
43929
12415 768 Lifting Lever Connecting Rod for 20008,
43928 and 43929
20255 2020 Lifting Lever Connecting Rod for 20290
12416 774 " " " " Joint
76d 782 " " " " " Hinge
Screw
1521e 772 Lifting Lever Connecting Rod Lock Nut
12241 772 " " Link for 20008, 20290 and
43929
21301 1353 Lifting Lever Link for 43928
12240 772 « " Pin for 20008 and 20290...
16586 5843 " " " " 43929
19372 1313 " " " " 43928
448c 783 " " " Set Screw
2763 819 Rock Shaft
12242 819 Rock Shaft Hanger with two wood screws
1 in. No. 10
6337 819 Rock Shaft Lifting Bracket with two 356c.
12243 819 " " " " Hook for 4880
and 5598
7125 819 Rock Shaft Lifting Bracket Hook for 4880
and 5670
356c 783 RockShaftLifting Bracket Hook Set Screw
356c 783 " " " " Set Screw
2770 819 " " Stop Dog with 356c
356c 783 " " " " Set Screw
4880 819 RockShaftcomplete,Nos. 2763,2770,7125,
12243 and two each 6337 and 12242...
4881 819 Treadle
4882 2004 " Shaft
4883 2004 " Spring
4884 819 " Stand
4885 819 Treadle complete, Nos. 4879,4881 to 4884
and two wood screws 1 in. No. 16
166 FOOT LIFTER PARTS
NO. PL.\TE NAME
20008 Foot Liftercompletefor31-15,31-16,31-20,

31-22, 31-27, 31-32 and 31-34 Machines,
Nos. 76d, 766d, 802d, 1521e, 4880,4885,
5598, 5670, 12237, 12240, 12241, 12415,
12416, and two 17Se
20290 Foot Lifter complete for 31-24 Machine,
Nos. 76d, 766d, 802d, 1521e, 4880,4885,
5598, 5670, 12237, 12240, 12241, 12416,
20255 and two 178e
Nos. 7Cd, 766d, 802d, 1521e, 4880,4885,
5598, 5670, 12415, 12416, 19372, 20340,
21301 and two 178e
Nos. 76d, 766d, 802d, 1521e, 4880,4885,
5598, 5670, 12241, 12415, 12416, 16586,
20340 and two 178e
KNEE LIFTER PARTS

NO. PLATE NAME
5596 768 Bell Crank

56848 " 5596 with 5599 and 5601
5599 768 " Bracket
178e 782 " Screw
5601 773 " Hinge Pin
5735 1353 " " Spring
5598 768 Bell Crank complete, Nos. 5735 and 56848
12237 760 Lifting Lever with 448c, for 12445,20256,
20466 and 43933
20340 2049 Lifting Lever with 448c, for 20341, 43930,
43931 and 43934
20341, 20466, 43930, 43931 and 43934..
20255 2020 Lifting Lever Connecting Rod for 20256
and 43933
12416 774 Lifting Lever Connecting Rod Joint
76d 782 " Hinge
Screw
1521E 772 Lifting Lever Connecting Rod Lock Nut.
12241 772 " " Link for 12445,20250,20466,
43930, 43933 and 43934
21301 1353 Lifting Lever Link for 20341 and 43931..
12240 772 " " Pin for 12445, 20256, 20466
and 43933
KNEE LIFTER PARTS 167
NO. PLATE NAME
16586 5843 Lifting Lever Pin for 43930 and 43934...

19372 1313 " " 20341 and 43931...
448c 783 " " " Set Screw
2763 766 Rock Shaft for 12250
20091 5735 " " « 20465
7539 766 " " Hanger with two wood screws
1 in. No. 10, for 12250
2764 5735 Rock Shaft Hanger (back) with two wood
screws 1 in. No. 10, for 20465
16128 5735 Rock Shaft Hanger (front) with two wood
2765 5735 Rock Shaft Knee Arm
2766 766 " " " " Hub with 356c, for
2768
20462 5735 Rock Shaft Knee Arm Hub with 356c, for
20463
356c 783 Rock Shaft Knee Arm Hub Set Screw...
2768 Rock Shaft Knee Arm complete for 12250,
Nos. 2765 to 2767
20463 Rock Shaft Knee .4.rm complete for 20465,
Nos. 2765, 2767 and 20462
2767 5735 Rock Shaft Knee Arm Plate with 356c ..
356c 783 " Set Screw..
20464 5735 " " Lifting Arm with 356c, for
20465
356c 783 Rock Shaft Lifting Arm Set Screw
6337 766 " " " Bracket with two356c,
for 12250
356c 783 " " " " Set Screw
2770 5735 " " Stop Dog with 356c
356c 783 " " " " Set Screw
12250 Rock Shaft complete for 12445, 20256,
20341 and 43930, Nos. 2763, 2768, 2778,
6337 and two each 2770 and 7539
20465 5735 Rock Shaft complete for 20466, 43931,
43933 and 43934, Nos. 2764, 16128,
20091, 20463, 20464 and two 2770
12445 Knee Lifter eomplete (power table or stand
25265) for 31-15, 31-16, 31-20, 31-22,
31-27, 31-32 and 31-34 Machines, Nos.
76d, 766d, 802d, 1521e, 5598, 12237,
12240, 12241, 12250, 12415, 12416 and
two 178e
168 KNEE LIFTER PARTS
NO. PLATE NAME
20341 Knee Lifter complete (power table or stand

25265) for 31-19 Machine, Nos. 76d,
766d, 802d, 1521e, 5598, 12250, 12415,
12416,19372,20340,21301 and two 178b.
766d, 802d, 1521e, 5598, 12237, 12240,
1224J, 12250,12416,20255 and two 178e
766d, 802d, 1521e, 5598, 12241, 12250,
12415,12416,16586,20340 and twol78E
20466 Knee Lifter complete (Stand 25255) for
31-15, 31-16, 31-20, 31-22, 31-27, 31-32
and 31-34 Machines, Nos. 76d, 766d,
802d, 1521e, 5598, 12237,12240,12241,
12415, 12416, 20465 and two 178e
43931 Knee Lifter complete (Stands 25255 and
766d, 802d, 1521e, 5598, 12415, 12416,
19372,20340,20465,21301 and two 178b
31-24 Machine, Nos. 76d, 766d, 802d,
1521e, 5598,12237,12240,12241,12416,
20255, 20465 and two 178e
31-35 Machine, Nos. 76d, 766d, 802d,
1521e, 5598,12241,12415,12416,16586,
20340, 20465 and two 178e
KNIFE GRINDER
FOR 5726
NO. PLATE NAME

27565 1104 Emery Wheel, 2 in. diam
1508J 1105 " " Clamping Nut
27822 1105 " " " " Washer....
27567 1105 " " Shaft
60934 EmeryWheelShaft27567withl508j,27565
27569 and 27822
27568 1105 Emery Wheel Shaft Oil Hole Cover
(rubber)
27569 1105 Emery Wheel Shaft Pulley
310k 1105 " " " Screw Centre
1516J 1105 « " " " " Nut...
27564 1104 Frame with 27574
KNIFE GRINDER 169
NO. PLATE NAME
899j 1105 Knife Clamping Screw

126392 8632 " Holder
27657 " " Body for 27658
27679 " " " " 27681
27658 1105 Knife Holder complete for 5726, for 27661,
Nos. 899J, 27657 and 27660
27681 6255 Knife Holder complete, Nos. 899j, 11833,
27660 and 27679
126393 Knife Holder complete, Nos. 227J, 899.r,
27660, 126392 and 126394
27323 1105 Knife Holder Guide Bar
27572 1104 " " " " Bracket with
27574
310k 1105 Knife Holder Guide Bar Bracket Screw
Centre
1516J 1105 Knife Holder Guide Bar Bracket Screw
Centre Nut
27573 1105 Knife Holder Guide Bar Bracket Spring
27574 1105
Hook
27659 1105 Knife Holder Stop Collar with 237k
237k 1105 " " " " Set Screw
27660 6255 " Position Pin for 27658 and 126393
27660 6255 " " " (lower) for 27681
11833 6255 " " " (upper) for 27681
261J 1105 " Regulating Thumb Screw
126394 8633 " Stop
227j " " Screw
•60583 Knife Grinder, Nos. 261j, 27323, 27564,
27572, 27573, 27659, 60934, two 27568
and four each 310k and 1516j
27661 KnifeGrindercomplete, Nos. 27662,60583,
either 27658, 27681 or 126393 and three
wood screws 1 in. No. 10
27662 1104 Wrench for 1508 and 1516
BENCH STAND
NO. PLATE NAME
79758 Bench Stand with 12248, two each 44244,
wood screws iu. No. 10, three wood
screws IH iu. No. 10 R. H. O. and A
and four each 12405 and 28084
12405 8633 Machine Cushion (felt) for 79758
28084 8633 " " " Pin
27130 8633 " " (leather) for 12248
170 BENCH STAND
NO. PLATE NAME
44243 8633 Machine Hinge Connection

2809 8633 " " " Hinge Pin...
33887 8633 " " Plate
44244 MachineHingecomplete,Nos.2809,33887,
44243 and Merlized wood screw in.
No. 14
12248 8632 Machine Rest with 27130 and two wood
screws 1 in. No. 12
STAND
HIGH SPEED
NO. PLATE NAME

25329 3813 Band Wheel, 16 in. diam., with 1312c....
1312c 3817 " « Set Screw
25421 3814 " « Shaft
25422 3815 " " " Driver (left)
25423 3815 " " " " "Clutch
(left)
25424 3815 Band Wheel Shaft Driver (left) Clutch
(right) with 5564
Spring
Spring Hook
25426 3815 Band Wheel Shaft Driver (right)
25427 3815 " " « " " Clutch
(left)
25428 3815 Band Wheel Shaft Driver (right) Clutch
(right) with 5564
Spring
Spring Hook
25429 3815 Band Wheel Shaft Driving Flange with
356c
356c 3817 Band W^heel Shaft Driving Flange Set
Screw
*46604 Band Wheel Shaft Driving Flange (left)
complete, Nos. 25422 to 25425, 25429
and 25434
*46605 Band Wheel Shaft Driving Flange (right)
complete, Nos. 25425 to 25429 and 25434
25370 Belt, sizeM in., length67in., with 25127
25127 3817 " Hook
STANDS 171
NO. PLATE NAME
25430 3814 Brace

748r 3817 " Screw
20467 5762 Drip Pan with eight 1 in. wire nails
25431 3813 Driving Arm (left) with 435c and 25435...
25432 3813 " " (right) with 435c and 25435
25433 3816 " " Hinge Pin
435c 3817 " " " " Set Screw
25434 3815 " Pinion
25435 3816 " Segment (rack)
534r 3817 " " Bolt with 1510r
1510r3817 " " " Nut
25446 3817 " " " " Washer
25349 3813 Foot Rest
25350 3817 " " Cotter Pin
25435 3816 " " Hinge Pin
25436 3813 Leg (left)
25437 3813 " (right)
25438 3814 " Stay Rod
1508r3817 " " " Nut
25086 3813 Wrench for 1510
25255 Stand (iron work) complete, Nos. 25086,
25329, 25421, 2.5430 to 25432, 25436 to
25438, 46604, 46605, two each 25345,
25349, 25350, 25433 and four each 534r,
748r, 1508r and 25446
STAND
ROCKING TREADLE, BALL REARING PITMAN
NO. PLATE NAME

25301 3825 Band Wheel, 16 in. diam., with 972c
46519 3825 " " Crank
46520 Band Wheel Crank and Pitman (ball bear
ing) complete, Nos. 1520r, 25371,46506
to 46509, 46519, 46523, 46630, 46655
and six 25362
297c 3826 Band Wheel Crank Screw Centre
46629 " " " " " 2 9 7 c
with 1507r
1507r 3826 Band Wheel Crank Screw Centre Nut...
972c 3826 " " Set Screw
25016 Belt, size K in., length 69K in. with 25127
25127 3817 " Hook
46667 Brace
82985 5216 " 46667 with three 46629
748r 3817 " Screw
172 STANDS
NO. PLATE NAME
46528 6142 Brace Section (left) with 46629

46663 6142 " " (right) with two 46629
880r 5843 " " Screw
46662 6142 Brace (sectional) complete, Nos. 46528,
46663 and three 880R
82973 5216 Leg
25362 3826 Pitman Ball, size A in
46506 3826 " " Bearing Adjusting Screw
Ring
46507 3826 Pitman Ball Bearing Adjusting Screw
Ring Locking Washer (brass)
46508 3826 Pitman Ball Bearing Ring
46509 3826 " Case
46655 3826 " " Separator
46523 3825 " Rod with 25360
♦25360 " Ball
25371 3826 " " Bushing
25361 3826 " " " Screw Bearing
46630 " " " " " 25361
with 1670r
1670r 3826 Pitman Rod Ball Screw Bearing Nut....
1520r 3826 " " Lock Nut
46524 3825 Treadle
46629 " " " 297c with 1507r...
1507r 3826 " " " Nut
25086 3813 Wrench for 1507 and 1670
25200 3825 " " 972
25200, 25301, 46520, 46524, 82985, two
82973 and four 748r
STAND
FOR ELECTRIC MOTOR
NO. PLATE NAME

297c 3826 Band Wheel Crank Screw Centre
46629 " " " " " 2 9 7 c
with 1507r
25490 Belt, size M in., length 36 in., with 25127.
25127 3817 " Hook
46667 Brace
82985 5216 " 46667 with three 46629
748r 3817 " Screw
46528 6142 " Section (left) with 46629
STANDS 173
NO. PLATE NAME
46663 6142 Brace Section (right) with two 46629

880r 5843 " " Screw
46663 and three 880r
82973 5216 Leg
25082 5760 Treadle
46629 " " " 297c with 1507r...
1507r 3826 " " " Nut
7958 5741 Motor Pitman Pin
25086 3825 Wrench for 1507
25082,25086,82985, two 82973 and four
748r
STAND
ROCKING TREADLE, BALL BEARING PITMAN, FOR FOOT
POWER AND S. D. 11 OR S. A. 12 ELECTRIC MOTORS
NO. PLATE NAME

25301 3825 Band Wheel, 16 in. diam., with 972c
46519 3825 " " Crank
ing) complete, Nos. 1520r, 25371, 46506
to 46509, 46519, 46630, 46655, 46658 to
46660 and six 25362
297c 3826 Band WTieel Crank Screw Centre
46629 " " " " " 2 9 7 c
with 1507r
972c 3826 " " Set Screw
25016 Belt,size M in.,length69)^ in.,with25127,
from band wheel to machine
46657 Belt, size H in., length in., with25127,
from motor to machine
25127 3826 Belt Hook
46667 Brace
82985 5216 " 46667 with three 46629
748 R 3826 " Screw
46663 and three 880r
46528 6142 Brace Section (left) with 46629
46663 6142 " " (right) with two 46629
880r 5843 " " Screw
82973 5216 Leg
25362 3826 Pitman Ball, size in
174 STANDS
NO. PLATE NAME
46506 3826 Pitman Ball Bearing Adjusting Screw

Ring
46507 3826 Pitman Ball, Bearing Adjusting Screw
46509 3826 " " Case
46655 3826 " " Separator
46658 5843 " Rod (lower) \vith 25360
•25360 " " " BaU
25371 3826 " " " " Bushing
25361 3826 " " " " Screw Bearing
46630 " " " " " "
25361 with 1670r
1670r 3826 Pitman Rod (lower) Ball Screw Bearing
Nut
46659 5841 Pitman Rod (upper)
1520 R 3826 " " " Lock Nut
46660 5843 " " Coupling
46524 3825 Treadle
46629 " " " 297c with 1507r...
1507r 3826 " " " Nut
10875 5841 Wrench for 46660
25086 3825 " " 1507 and 1670
25200 3825 " " 972
25086, 25200, 25301, 46524, 46656,
82985, two 82973 and four 748r
67175 5843 Hook for 67072
67176 5844 Treadle Pitman Rod (lower)
67086 5844 " " " (upper)
9079 5844 " " " Clamp with 354c...
354c 1101 " " " " Screw
67177 5844 Treadle Pitman complete, Nos. 9079,67086
and 67176
TRIMMINGS FOR END AND BACK

LEAF TABLE
NO. PLATE NAME
25001 3825 Back Leaf Bracket with two wood screws

1 in. No. 10
25002 3825 Back Leaf Scroll Bracket with ^ in. No. 9
and two 1 in. No. 12 wood screws
25003 3825 Back Leaf Sliding Hinge, Nos. 25149,
three 25151 and six wood screws % in.
No. 7
TRIM MINGS FOR END AND BACK LEAF TABLE 175
NO. PLATE NAME
25151 3825 Back Leaf Sliding Hinge Plate

25149 3825 " " " " Rod
25057 382.5 End Leaf Support complete, Nos. 25143,
25168, 25169 and two wood screws %
in. No. 7
25168 382.5 End Leaf Support Bracket
25060 3825 " " " Button with wood screw
VA'xn. No. 12 R. H. B
25169 3825 End Leaf Support Lever
25143 5742 " " " " Hinge Pin
20022 5742 Machine Rest (felt) for machine on stand
THREAD UNWINDERS
THREAD UNWINDER
FOR ONE URGE SPOOL OR ONE URGE CONE OF THREAD
NO. I'L.\TE NAME
225389 8523 Spool Rest with 201018c

225388 8523 " " Rod
200383c 8633 " " " Set Screw
201018c 8633 " " Set Screw
202490 8523 " Stand with 200383c
225391 8523 Thread Guide
201696J 8633 •* " Lock Nut
225392 8523 " " Rod with 208e and 225393
208e 782 " " Screw
225393 8633 " " " Wa.sher
225394 8523 Thread Unwinder complete, Nos. 201696.1,
202490, 225388, 225389, 225391, 225392
!ind three wood .screws A No. 12...
27739 8520 Thread Cone (wood) for large cone.s
225390 8520 " " Holder, for inverted cones.
Note: Nos. 27739 and 225390 are used with, hut
not included in, 225394
THREAD UNWINDER
FOR TWO URGE SPOOLS OR TWO URGE CONES OF THREAD
This Thread Unwinder Is the same as 225394

with the following exceptions:
NO. PL.\TE NAME
225395 7233 Spool Rcstwith 201018c, in place of 225389
176 THREAD UNWINDERS
NO. PLATE NAME

225396 7233 Thread Unwinder complete, Nos. 20169&r,
202490, 225388, 225392, 225395, two
225391 and three wood screws % in. No.
12
27739 8520 Thread Cone (wood) for large cones
225390 8520 " " Holder, for inverted cones .
Note: Nos. 27739 and 225390 are used with, but
not included in, 225396
THREAD UNWINDER
FOR ONE LARGE SPOOL OR ONE LARGE CONE OF THREAD
OBSOLETE, USE 225394
NO. PLATE NAME
27623 2836 Spool Pin
155c 5753 " " Set Screw
41526 2836 « Rest
60701 " " 41526 with 155c and 1149c..
41527 " " 60701 with 27623
1149c 5742 " " Set Screw
27940 2836 " Stand with 453c
41514 2836 " Weight, 4 in. diam., with 41515
41515 5742 " " Centre Pin
27739 2836 Thread Cone (wood)
41630 2836 " Guard with 208e and 41569
41569 5842 " " Eyelet
41637 2836 " " Rod (lower)
41638 2836 " " " (upper)
41639 2836 " " " Coupling with two
456c
456c 773 Thread Guard Rod Coupling Set Screw..
41640 Thread Guard Rod complete, 30 in. long,
Nos. 41637 to 41639
453c 783 Thread Guard Rod Set Screw
208b 782 " " Screw
41529 2836 Thread Unwinder complete, Nos. 27739,
27940, 41514, 41527, 41630, 41640 and
three wood screws 1 in. No. 12
THREAD UNWINDER
FOR TWO LARGE SPOOLS OR TWO URGE CONES OF THREAD
OBSOLETE, USE 225398
This Thread Unwinder is the same as No. 41529
with the foiiowing exceptions:
NO. PLATE NAME
41530 2837 Spool Rest, in place of 41526
THREAD UNWINDERS 177
NO. PLATE NAME
60455 Spool Rest 41530 with 1149c and two 155c

in place of 60701
41531 Spool Rest 60455 with two 27623, in place
of 41527
41631 2837 Thread Guard with 208e and two 41569,
in place of 41630
41533 2837 Thread Unwinder complete, Nos. 27940,
41531, 41631, 41640, two each 27739,
41514 and three wood screws 1 in. No. 12
OBSOLETE PARTS
NO. PLATE NAME
*20399 Arm with 11104, for 31-37 Machine
29599 2014 " Oil Tube Packing (felt) for 11119,
12454 and 24131
25330 3816 Band Wheel Brake (rubber) for 25418...
25418 3814 " " " Lever with 443c and
25330, for 25255
25419 3816 Band Wheel Brake Lever Hinge Pin for
25418
443c 3817 Band Wheel Brake Lever Hinge Pin Set
ScreAV
25420 3816 Band Wheel Brake Lever Spring for 25418
28366 2645 Binder Folder for 28794, use 120493,120494
or 120495
12484 2003 Boblun Winder Spring for 12172, 12202
and 12337
two 896e, for 375
two 896e, for 908, use 20197
*14013 Crank Connecting Rod Cap for 12365 and
12496
375c 782 Crank Connecting Rod Hinge Screw
1518.r 783 " " " " " Nut
for 375
power table, for Drop Feed Machines,
use 44212
12225 768 Driving Arm Pitman Crank for 12476, for
12478 and 20141
12476 774 Driving Arm Pitman Crank Spring for
12225, for 12478 and 20141
27636 363 Driving Attachment Treadle for 27642...
9082 773 " " " Bearing
Cotter Pin for 27642
178 OBSOLETE PARTS
NO. PLATE NAME
2877 818 Driving Att.nchment Trendie Pitman Rod

(upper) for 15130
16130 818 Driving Attachment Treadle Pitman com
plete for 15131, Nos. 2762, 2877, 6055,
9079, 27637 and 27638
2878 363 Driving Attachment Treadle Stand for
27642
27642 Driving Attachment Treadle complete for
14234 and 15131, Nos. 2878, 9082,
27636 and four wood screws 1 in. No. 16
15131 Driving Attachment Treadle and Pitman
comjdete for 12478 and 20141, Nos.
15130 and 27642, use 126042
complete for 12478 and 20141, Nos.
14233 and 27642
20402 5756 Edge Guide for 31-37 Machine
12371 779 Feed Dog, for shirt work, for 31-15 Ma
chine
20009 1258 Feed Dog, for tailor work, for 31-15, 31-20
and 31-22 Machines
20329 776 Feed Dog for 31-32 Machine
the inch) for 31-15, 31-19, 31-20 and
31-22 Machines
the inch) for 31-15, 31-19, 31-20 and
31-22 Machines
20303 776 Feed Dog (reversible) for 31-32 Machine
12428 767 Feed and Feed Lifting Eccentric with446c,
for 31-15, 31-16, 31-20, 31-22 and 31-24
Machines
12429 2002 Feed Forked Connection for 31-15, 31-16,
31-20, 31-22 and 31-24 Machines
12331 5757 Feed Forked Connection for 31-32 Ma
chine, use 44003
12374 766 Feed Lifting Rock Shaft for 12375
12375 Feed Lifting Rock Shaft complete for
31-15, 31-16, 31-19, 31-20, 31-22, 31-24,
31-27, 31-32, 31-34, 31-35 and 31-37
Machines, Nos. 3043, 12374 and 12376,
use 44126
12200 774 Feed Lifting Rock Shaft Crank (back)
with 462c, use 3043
with 462c, for 12375
OBSOLETE PARTS 179
NO. PLATE NAME
2049 773 Feed Lifting Rock Shaft Crank (hack) Pin

462c 773 " " " " " " Set
Screw
12430 2002 Feed Lifting Rock Shaft Crank Connecting
Rod with 12204 and two 966e, for 31-15,
31-16, 31-19, 31-20, 31-22, 31-24, 31-27,
31-32} 31-34, 31-35 and 31-37 Machines
ing Rod Cap for 12430
58e 782 Feed Regulator Hinge Screw
12380 Feed Rock, Shaft complete, Nos. 3043 and
12379, use 20333
20239 Feed Rock Shaft complete for 31-24 Ma
chine, Nos. 3043, 20238 and 20247, use
20334
28969 2669 Guide âdjustable, hinged) complete, Nos.
286d, 940d, 7071, 28971 to 28973 and
35610, use 120428
27680 Knife Grinder Knife Holder Body for
27682
27682 6255 Knife Grinder Knife Holder complete for
27661, Nos. 899.t, 11833, 27660 and
27680, use 126393
46522 3825 Leg for 25265, 25279 and 25284
453c, for 31-19 Machine
20367 770 Needle Bar Connecting Stud Slide Block
for 20368
Nos. 453c, 12383 and 20367, use 12384
12385 767 Needle Bar Crank with S55c, and 858c,
use 20188
855c 783 Needle Bar Crank Position Screw for 12385
696b 782 " " Plug Screw
12495 2014 " " " " Rivet
1072P 1317 " Set Screw fqy 16568
36578 Oiler (copper plated) with 36579 (Attach
ments and Accessories) use 120342
36579 Oiler Spout, 3H in* long, with 120117, for
36578
120117 Oiler Spout Washer (leather) for 36579...
12188 768 Oil Cover for 12478 and 20141
397d 782 " " Screw
24020 2009 " Cup for 24024
44004 2565 " " " 44007
24023 2009 " " Extension with 24075, for 24024
12486 " " Packing (felt) for 24024
180 OBSOLETE PARTS
NO. PLATE NAME
24024 2009 Oil Cup complete for 31-16 Machine, Nos.

12486, 24020 and 24023, use 44007....
44004 to 44006, use 44225
12386 767 Oscillating Rock Shaft for 375, for 12387.
12497 2001 " " " " 908 and 1902,
for 12498, use 24104
4784, 12386 and 12388
4784, 12388 and 12497, use 24105
878j 783 Oscillating Rock Shaft Hinge Pin Oil Hole
Stop Screw
12459 773 Oscillating Rock Shaft Hinge Pin Oil Hole
Stop Screw Washer (leather)
12443 772 Oscillating Rock Shaft Oil Pad for 16508.
16508 772 " " " Holder
with 12443
238d 782 Oscillating Rock Shaft Oil Pad Holder
Screw
1902 783 Oscillating Shaft Crank Roller and Screw
Stud
1518j 783 Oscillating Shaft Crank Roller and Screw
Stud Nut
460c 783 Oscillating Shaft Crank Set Screw for 19447
Screw for 19449, use 226d
457c, 1518J, 1902 and 19496
for 20438
20409 5756 Plaiting Blade Holder (lower) Spring Stop
for 20438
20431 5757 Plaiting Gear Cover for 31-37 Machine...
206d 5756 " " " Screw
20438 5756 " Rock Shaft for 20409, for 31-37
Machine
43805 5742 Presser Foot for 31-42 Machine
2532 772 " " Hinge Pin for 20157, 20311,
20346 and 24489
2532 1371 Presser Foot (right) Hinge Pin for 28814
24545 " " Shank for 24546
12425. 12481, 19474 and 20119, Nos.
24544, 24545, 26231 and 62527
OBSOLETE PARTS 181
NO. PLATE NAME
25990 2029 Quilter complete, Nos. 25991 and 25992,

use 120485
24117 2006 Shuttle Bobbin Case Guide Plate for
24120
1053d 2006 Shuttle Bobbin Case Guide Plate Screw
for 24120
15003 771 Shuttle Bobbin Case Hinge, Nos. 2972 to
2974 for 12417 and 19293
20593 and 20594, for 20591, use 20652
2974 and 20593 for 20653
2972 771 Shuttle Bobbin Case Latch for 15003....
20593 2012 " " " " " 20592 and
20652
20594 2012 Shuttle Bobbin Case Latch Lever for
20592
2521 1371 Shuttle Bobbin Case Latch Spring for
20591 and 20653
20595 2012 Shuttle Bobbin Case Position Finger for
20591, 20651 and 20653
12417 Shuttle Bobbin Case complete for 12392,
Nos. 591f, 592e, 2523, 2526, 2975, 7553
and 15003, use 19293
19293 771 Shuttle Bobbin Case complete for 19292,
Nos. 591f, 592e, 2523, 2975, 7553,
15003 and 15098, use 24074
Nos. 591f, 592e, 2521, 2523, 20592,
20595 and 20600, use 20653
Nos. 591f, 592b, 2521, 2523, 20595,
20652 and 20654, use 20651
Nos. 591f, 592b, 2523, 2975, 20595,
20650 and 20654
24074 2013 Shuttle Bobbin Case complete for 12487
and 19292, Nos. 691p, 592e, 2523, 2975,
7553, 15098 and 15141, use 62740
20596 2012 Shuttle Body for 20590 and 20655
462c 773 " Driver Set Screw for 12444 and
19406
12392 Shuttle, IH diam., Nos. 2996, 12393
and 12417, use 19292
20590 Shuttle, IH in. diam., Nos. 19131, 20591,
and 20596, for 31-20 Machine, use 20655
182 OBSOLETE PARTS
NO. PLATE NAME
20655 2012 Shuttle, 1^ in. diam., Nos. 19131, 20596

and 20651, for 31-20, 31-22 and 31-24
Machines
5708 Shuttle Race Body for 5707
12490 " " " 12489
19402 " " " " 19404
24008 " " " " 62623
62623 " " " 24008 with 24009 and
two 1053d, for 24010
5709 767 " " Cap'for 5707
12491 2005 " " " " 12489
19403 2006 " " " " 19404
662d 782 " " " Screw for 5707, 12489
and 19404
4621 5843 Shuttle Race Cap Steady Pin for 19404..
5707 767 Shuttle Race complete for 31-15 and 31-16
Machine.s, Nos. 648d, 2531, 2533, 5708,
5709 and two eacli 662d and 2532
12489 Shuttle Race (.sectional) complete for
31-16 Machine, No.s. 648d, 2531, 2533,
12490 to 12494 and two each 85d, 662d
and 2532, use 20005
19404 1356 Shuttle Race complete for 31-20 Machine,
Nos. 64Sd, 602d, 2419, 2533, 4621,
19402, 19403 and two 2532, use 24325
Nos. 648d, 2419, 2533, 62623 and two
2532, use 24325
24120 2006 Shuttle Race complete for 31-20, 31-22
and 31-24 Machines, Nos. 907d, 2419,
' 2533, 24009, 24117,24118, two 2532 and
four 1053d, use 24325
647p 774 Shuttle Race Screw, u.se 145d
12395 " " Slide, use 12431
240d 782 " " " Spring Screw for 12396
and 20450
12396 Shuttle Race Slide com|)lete, Nos. 4307,
12395 and two 240d, use 12432
2526 5842 Shuttle Tension Spring for 12417, use
15098
15098 771 Shuttle Tension Si)ring for 19293 and
24074
20600 2012 Shuttle Tension Spring for 20591
43806 Stop Wheel with 2269, for 43807
12325 5738 " " Block for 43807
OBSOLETE PARTS 183
NO. PLATE NAME
43807 5735 Stop Wheel complete for 31-42 Machine,

Nos. 446c, 12316, 12325, 12345, 43806
and two 840d, use 43943
2921 772 Tension Disc for 44147
20037 2009 " Releaser for 44147
20185 2011 " " " 20370
20314 1353 " " " 29549
12354 772 " " use 20037
12397 772 Tension Releasing Lever for 31-19 and
31-42 Machines
20186 2011 Tension Releasing Lever for 31-22 Ma
chine
20370 2048 Tension Releasing Lever for 20185, for
31-22 Machine
29549 1353 Tension Releasing Lever for 31-15, 31-16,
31-20, 31-24, 31-27, 31-32, 31-34 and
31-37 Machines
413c 783 Tension Screw Stud for 33892
33892 " " " 413c with 1560c, for
44174 and 44149, Nos. 20061 to 20063,
for 31-15, 31-16, 31-20, 31-22, 31-24,
31-27, 31-32, 31-34 and 31-37 Machines
20061 1353 Tension Screw Stud Bushing
20062 1353 " " " Flange
20083 1353 " " " " Collar
190d 782 " " " Screw
44147 Tension complete for 31-19 and 31-42 Ma
chines, Nos. 2923, 7336, 8511, 20037,
33892 and two 2921
44149 Tension complete for 31-39 Machine, Nos.
2923, 7336, 8511, 33892 and two 2102..
Nos. 12400 TO 12402 for 12399
460c 783 Thread Retainer Set Screw

12400 773 " " Sleeve
12401 773 " " Spring
12402 773 " " Stud
400c 783 " " " Set Screw for 12402
12399 Thread Retainer complete for 31-15, 31-16
31-19, 31-20, 31-22, 31-24, 31-27, 31-32,
31-34, 31-35, 31-37 and 31-39 Machines,
No.s. 12400 1o 12402, use 52379
Set Screw for 31-1.5, 31-16, 31-19, 31-20,
31-22, 31-24, 31-27, 31^2, 31-34, 31-35,
31-37 and 31-39 Machines
184 OBSOLETE PARTS
NO. PLATE NAME
8511 773 ThreadTake-upSpringfor44147and44149

20010 1268 " " large needle hole, for 20009,
use 44137
20024 Throat Plate, small needle hole, for 20009,
use 44138
12438 776 Throat Plate, large oblong needle hole, for
20329
20329
12457 and 20303
12457 and 20303

in SINGER Machines
are marked with the
Company's Trade Mark "SIMAN CO.**" i

185
NUMERICAL LIST OF PARTS

NO. PLATE NAME
16c 5740 Starting Bell Crank Hinge Screw for 12344
32d 782 Bobbin Winder Frame Hinge Screw for
12172, 12202, 12337, 16522, 19260,
20309 and 20498
(intermediate) for 31-37 Machine
for 27647, 27650, 27651 and 27875....
58e 782 Feed Regulator Hinge Screw, obsolete. ..
68d 782 Tucker Tuck Guide Plate .4rm Hinge
Screw for 26683
65d 782 Driving Attachment Driving Arm Pitman
Hinge Screw for 12478 and 20141
(l)ack) for 31-37 Machine
(front) for 31-37 Machine
69d 5742 RulTlcr Driving Lever Hinge Screw for
26018 and 26230
for 16522 and 19260
76d 782 LiftingLeverConnectingRod Joint Hinge
Screw (Foot and Knee Lifter.^) for
12445, 20008, 20256, 20290, 20341,
20466, 43928, 43929, 43930, 43931,
43933 and 43934
76d 2061 Separating Blade Arm Hinge Screw for
35280
85d 2005 Shuttle Race Ring Clamp Screw for 12489
and 20005
93f 2669 Pre.'iscr Foot Tension Plate Screw for
35447
94d 1375 Edge Guide Slide Lever Hinge Screw for
26810
94d 1376 Hemmer Folder Disengaging Lover Hinge
Screw for 28688
96d 2038 Strip Folder Hinge Screw for 28707
102d 2035 Rufher Ruffling Blade Lever Disengaging
Lever Hinge Screw for 26724
102d 2061 Separating Blade Arm Latch Lever Hinge
Screw for 35280
102d 2061 Separating Blade Holder Hinge Screw for
35280
186 NUMERICAL LIST OF PARTS
NO. PLATE NAME
IOSd 2061 Separating Blade Holder Spring Screw for

35280
129d 5736 Finger Protector Screw for 31-39 Machine
131d 2019 Presser Foot Roller Screw for 20243
134d 2019 ReciprocatingSpringPresserShaftBracket
(back) Screw for 31-24 Machine
135d 2026 Corder Screw for 26169, 26328 and 28788
141d 5750 Plaiting Cam Shaft Bracket Screw for
31-37 Machine
141d 5750 Plaiting Lever Bracket Screw for 31-37
Machine
144d 782 Arm Shaft Screw for 31-15, 31-16, 31-19,
31-20, 31-22, 31-24, 31-27, 31-32, 31-34,
31-35, 31-37 and 31-39 Machines
145d 5752 Plaiting Gear Cover Screw for 31-37 Ma
chine
145d 1324 Ruffling Arm Shaft Bracket (right) Screw
for 31-27 Machine
145d 5752 Separating Blade Bracket Screw for 31-37
Machine
152f 2038 Binder Guide (upper) Screw for 26694...
152f 782 " Screw for 25664
152f 782 Bobbin Winder Stop Latch Adjusting
Screw for 16516 and 19258
155c 5739 Needle Bar Connecting Stud Set Screw for
121.31
155c 5753 Plaiting Rock Shaft Lever Arm Hinge
Stud Set Screw for 20423
155c 5753 Thread Unwinder Spool Pin Set Screw for
60-155 and 60701
Screw for 12376
157j 782 Feed Rock Shaft Crank Clamping Screw
for 20633
158c 1206 Bed Kraine Cu.shion Screw for 20067
159d 1324 Ruffling .Arm Shaft Bracket (left) Screw
for 31-27 Machine
162o 8628 Bell Guiird lOxtcnsion Screw for 126365..
175d 5736 Liftiug Presser Bar Ciuide Bracket Support
Screw for 31-10 Machine
176t) 2038 Pn'sser Foot Screw for 31-37 Machine. ..
176i) 2038 'i'ucker ."^crcw for 26377
178e 782 Bell Crank Bracket Screw (Foot and Knee
Liflersi for 12445, 20008, 2025(», 20200,
20341, 20466, 43!)2S, 43!)20, 43030,
43031, 43933 and 43!)34
NUMERICAL LIST OF PARTS 187
NO. PLATE NAME

178p 5750 Plaiting Gear (back) Set Screw for 20425
180f 782 Bobbin Winder Spring Screw for 12172,
12202, 12337, 16522, 19260, 20309 and
20498
181d 1323 Ruffling Regulator Stop Screw for 31-27
Machine
185h 1371 Prc.sser Foot (left) Screw for 28816
185h 5754 Separating Blade Holder Screw for 31-37
Machine
190d 782 Binder Screw for 25650, 25653, 25656 and
36463
190d 782 Binder Ribbon Tension Screw for 26250,
26402, 26466, 28657, 28784, 120127,
120437 and 120459
190d 782 Box Plaiter Centre Guide Holder Screw
for 28352
190d 2026 Corder Arm Adjusting Screw for 25792...
190d 1377 " Cord Guide Screw for 120207
190d 1375 Edge Guide Screw for 26810
190d 782 Face Plate Screw for 31-15, 31-16, 31-20,
31-22, 31-24, 31-27, 31-32, 31-34, 31-37,
190d 1376 Hcmmer Screw for 28688
190d 782 Presser Foot Screw for 31-15, 31-16, 31-20,
31-22, 31-24, 31-27, 31-32, 31-34, 31-35
and 31-42 Machines
Crank Clamping Screw for 20247
190d 782 Reciprocating Spring PresserShaft Bracket
(front) Screw for 31-24 Machine
190d 782 Ruffling Arm Clamping Screw for 26889..
190d 1371 RufHer Starting Lever Clamping Screw
for 28601
190d 782 Starting Bell Crank Roller Screw for 1885
190i) 782 Strip Folder Holder and Guide Screw for
35351
190d 782 Tension Thread Guard Screw, olxsolete...
190d 782 Welt Guide Screw for 26150
191c 1366 Knife Bar Crank Set Screw for 24431....
191f 2019 Reciprocating Si)ring Presser Shaft Crank
(back) Set Screw for 20254
193f 1379 Binder Folder Screw for 26953, 28678 and
28776
193d 1312 Lifting Presser Foot Screw for 31-19 Ma
chine
196j 5809 Finger Guard Holder Clamping Screw for
36820
NO. PLATE NAME
196f 2038 Tucker Tuck Marking Bar Pressure Spring

Clamp Set Screw for 26109
198d 2658 Presser Foot Knife Clamp Screw for 28967
198d 1371 " " (right) Shank Cap Screw for
28816
199d 1312 Lifting Presser Bar Bell Crank Cap Screw
for 24716
199d 1312 Lifting Presser Bar Bell Crank Connect
ing Link Cap Screw for 24716
199d 5752 Plaiting Lever Connecting Rod Cap Screw
for 31-37 Machine
199d 1312 Vibrating Pre.sser Bar Cap Screw for 19366
200f 2633 Box Plaiter Sliding Bracket Arm Exten
sion Bracket Screw for 28352
200f 5752 Plaiting Rock Shaft Crank Set Screw for
20439
200d 5756 Plaiting Gear Cover Screw for 31-37 Ma
chine, obsolete
207f 2021 Binder Folder Screw for 26250, 26402,
26466, 28657, 28784, 28794, 28861,
120437, 120459 and 120467
207f 2021 Binder Guide (upper) Screw for 25664...
207f 2645 " Screw for 28828
207f 2645 " Strip Guide Screw for 28861
207f 1375 Edge Guide Slide Cap (left) Screw for
26810
207f 1375 Edge Guide Slide Cap (right) Screw (large)
for 26810
207f 1376 Ilemmer Slide Cap Screw (back) for
28688
207f 2021 Quilter Guide Holder Set Screw for 25992
207f 2021 " « Set Screw for 25992
207f 2021 Ruffler Foot Screw for 26018
207f 2021 " Frame Stud Set Screw for 26230
207f 1344 Ruffling Arm Adjusting Screw for 26890..
208e 782 Feed Dog Screw for 31-15, 31-16, 31-19,
31-20, 31-22, 31-24, 31-27, 31-32, 31-34,
208d 5745 Plaiting Blade (lower) Screw for 31-37
Machine
208d 5745 Plaiting Blade (upper) Screw (right) for
31-37 Machine
208e 782 Thread Unwinder Thread Guard Screw
for 41630 and 41631
208e 782 Thread Unwinder Thread Guide Rod
Screw for 41630, 41631 and 225392....
209c 8628 Quilter Guide Set Screw for 120482
NO. PLATE NAME
210d 6742 Driving Attachment Balance Wheel Oil

Cover Screw for 12478 and 20141
211e 1206 Bed Frame Hinge Connection Cap Screw
for 19398
212d 6755 Edge Guide Screw for 31-37 Machine—
212f 6746 Plaiting Blade Holder (lower) Cap Screw
for 31-37 Machine
212p 6746 Plaiting Blade Holder (upper) Cap Screw
for 31-37 Machine
217p 2061 Edge Folder Screw for 36283 and 36284..
217p 2061 " Guide (upper) Screw for 36282
217d 1312 Face Plate Screw for 31-36 Machine
217d 1312 Vibrating Presser Foot Screw for 31-19
Machine
219d 774 Arm Side Cap Screw for 31-16, 31-16,
31-20, 31-22, 31-24, 31-27, 31-32, 31-34,
219d 774 Face Plate Screw for 31-19 Machine
219d 774 Hemmer Plate Screw for 120078
219p 774 Presser Foot Ribbon Guide Screw for
28761
219f 774 RufOing Arm Set Screw for 26889
219f 774 Vibrating Presser Bar Cap Screw for 19367
220d 2038 Binder Folder Screw for 120127
220d 1376 Edge Guide Leveling Screw for 26810—
220d 2038 Tucker Tuck Marking Bar Bracket Hinge
Pin Set Screw for 26377
223f 1317 Knife Screw for 19391.
223d 2036 Ruffler Guide Screw for 26724
226p 6736 Slack Thread Regulator Adjusting Screw
for 31-15, 31-16, 31-20, 31-22, 31-24,
31-27, 31-32, 31-34 and 31-37 Machines
226p 1323 Ruffling Regulator Set Screw for 24211..
Screw for 19449
226d 1371 Ruffler Ruffling Blade Holder Cap Screw
for 28816
226d 1344 Ruffling Blade Holder Cap Screw for
28846
227j Knife Grinder Knife Stop Screw for 126393
228d 6746 Plaiting Blade (upper) Screw (left) for
31-37 Machine
228d 2038 Presser Foot Adjustable Guide Screw for
26639
228d 2038 Presser Foot Extension Screw for 12436
and 20167
NO. PLATE NAME
228d 2038 Presser Foot Strip Gauge Screw for 12435

and 20157
228d 2038 Strip Folder Lock Stud Spring Screw for
28707
Screw for 19449, obsolete use 206d
Crank Roller Cap Screw for 1942
233d 782 Binder Binding Guide Set Screw for 25664
233d 782 " Guide (back) Screw for 36463....
233d 782 " " (front) Screw for 36463
233d 1380 " Ribbon Tension Screw for 28678
and 28776
233d 782 Box Plaiter Sliding Bracket Cap Screw for
28352
233d 1375 Box Plaiter Sliding Bracket Stop Screw for
28352
233d 1375 Edge Guide Slide Cap (right) Screw (small)
for 26810
233d 1376 Hemmer Folder (left) Screw for 28688...
233d 1376 " Slide Cap Screw (front) for 28688
233d 782 Needle Bar Thread Guide Screw for 31-15,
31-16, 31-19, 31-20, 31-27, 31-32, 31-34,
31-37, 31-39 and 31-42 Machines
233d 782 Reciprocating Spring Presser Blade Screw
for 20253
233d 2039 Welt Guide Width Guide Screw for 26148
236j 5809 Finger Guard Screw for 120498
237k 1105 Knife Grinder Knife Holder Stop Collar
Set Screw for 27659
238d 2039 Welt Guide Cap Screw for 26150
238d 782 Oscillating Rock Shaft Oil Pad Holder
Screw, obsolete
239d 2061 SeparatingBladeArmLatch LeverSpring
Screw for 35280
240d 782 Shuttle Race Slide Spring Screwfor 12396
and 20450
240d 2039 Welt Guide Carrier Slide Stop Adjusting
Screw for 26150
241d 5754 Separating Blade Screw for 31-37 Machine
242d 2645 Presser Foot Edge Guide Screw for 28858
248a 2011 ClampStop MotionClampStop Screw for
3022
256j 2003 ClampStop MotionClampScrew for3022
261J 1105 Knife Grinder Knife Regulating Thumb
Screw for 60583
283d 1379 Binder Thumb Screw for 26956
NO. PLATE NAME
284d 13G6 Guide Thumi) Screw (long) for 25860,

25873, 25874 and 28058
286d 783 Ann Side Cover Thuinl) Screw
286i) 5807 Hinder Guide Thuinl) Screw for 30344,
120247 and 120248
2800 783 Hinder Shank Tluunh Screw for 12010G..
286d 783 Edge Folder Thuml> Screw for 36293....
280d 783 Face Plate Thumb Screw for 31-15, 31-16,
31-20, 31-22, 31-24, 31-27, 31-32, 31-34,
31-37, 31-39 and 31-42 Machines
286i) 783 Guide Thumb Screw for 28969 and 120428
287d 783 Tucker Edge Guide Slide Thumb Screw
for 20597
287d 783 Tucker Tuck Gui<le Plate Thumb Screw
for 20683
291d 2038 Tucker Cloth Guide Thumb Screw for
26377
296c 3820 Hand Wheel Crank Screw Centre for
46029
296c 5742 Start ing Treadle Screw Cent re for 46601..
297c 3820 Hand Wheel Crank Centre Screw for 40029
297c 3820 Troaille Screw Centre for 40029
307c 783 Feed Lifting Roiik Shaft Screw Centre for
50814
307c 783 Feed Rock Shaft Screw Centre for 50814
310k 1105 Knife Grinder Emery Wheel Shaft Screw
Centre for 00583
310k 1105 Knife Grinder Knife Holder Guide Bar
Bracket Screw Centre for 60583
313c 783 Feed Bar Screw Centre for 50813
320e 5741 Starting Treadle Extension Screw for
43815
333i) 782 Bobbin Winder Friction Wheel Washer
Screw for 12171. 12201,10515 and 20308
334d 2038 Hinder Folder Slide Carrier Screw for 36403
334d 2038 Hinder Pressure Spring Screw for 25650,
25653, 25656, 26694 and 36463
334d 2038 Tucker Tuck Marking Bar Set Screw for
26377
335h 1317 Knife Holder Handle Screw for 24128—
335h 1317 " " Screw for 24128
335d 1317 Presser Foot Graduated Adjustable Guide
Screw for 26977.
335d 1313 Vibrating Presser Bar Spring Screw for
31-19 Machine
337d 2045 Binder Ribbon Guide Screw for 28794...
NO. PLATE NAME
337d 1388 Presser Foot Guide Spring Screw for 26646

and 28773
337b 2671 Presser Foot Graduated Adjustable Guide
Clamp Screw for 35137
337d 1388 Ruffler Ruffling Blade Clamp Screw for
26230 and 26724
337d 2061 Separating Blade Screw for 35280
337d 1383 Throat Plate Needle Hole Plate Screw
for 26760 and 28342
337d 2039 Welt Guide Carrier Slide Switch Cam
Shaft Head Set Screw for 26139
354c 774 Driving Attachment Treadle Pitman Rod
(upper) Clamp Screw for^079
354c 1101 Starting Treadle Pitman Rod Clamp
Screw for 43813
354c 1101 Treadle Pitman Rod Clamp Screw for 9079
356c 3817 BandWheelShaftDrivingFlangeSetScrew
for 25429
356c 783 Rock Shaft Knee Arm Hub Set Screw for
2766 and 20462
356c 783 Rock Shaft Knee Arm Plate Set Screw for
2767
356c 783 Rock Shaft Lifting Arm Set Screw for
20464
356c 783 Rock Shaft Lifting Bracket Hook Set
Screw for 6337
356c 783 Rock Shaft Lifting Bracket Set Screw for
6337
356c 783 Rock Shaft Stop Dog Set Screw for 2770..
362p 2009 Driving Attachment Treadle Sto() Collar
Set Screw for 2762
375c 782 Crank Connecting Rod Hinge Screw, obso
lete
375c 782 Feed Connecting Link Hinge Screw for
43992, 43993 and 44188
375c 782 Feed Forked Connection Hinge Screw for
43992, 43993 and 44188
ing Rod Hinge Screw for 31-15, 31-16,
31-19, 31-20, 31-22, 31-24, 31-27, 31-32,
31-34, 31-35 and 31-37 Machines
375c 782 Lifting Presser Bar Bell Crank Driving
for 31-19 Machine
376e 8628 Stop Pawl Wearing Block Screw for 44230
386d 5842 Roller Arm Screw for 1928
NO. PLATE NAME

391d 1366 Shuttle Bobbin Case Position Plate Screw
for 24325, 24415 and 24419
397d 782 Oil Cover Screw, obsolete
401e 2038 Binder Folder Slide Carrier Adjusting
Thumb Nut Guide Screw for 36463....
401e 2038 Box Plaiter Folder Blade Screw for 28352
401e 2038 Tucker Cloth Guide Slide Screw for 26377
402d 5752 Plaiting Gear Cover Plate Screw for 20491
413c 783 Tension Screw Stud for 33892, obsolete..
418e 2014 Bobbin Winder Tension Screw Stud for
27308
418d 2014 Thread Retainer Screw Stud for 43809...
427e 783 Driving Attachment Driving Arm Friction
Plug Adjusting Screw for 16522 and
19260
Set Screw for 31-15, 31-16, 31-19, 31-20,
31-22, 31-24, 31-27, 31-32, 31-34, 31-35,
31-37 and 31-39 Machines, obsolete ...
435c 5742 Driving Attachment Balance Wheel Set
Screw for 16592
435c 3817 Driving Arm Hinge Pin Set Screw for
25431 and 25432
Set Screw
443c 3817 Band Wheel Brake Lever Hinge Pin Set
Screw for 25418, obsolete
443c 5752 Plaiting Lever Hinge Stud Set Screw for
20433
443c 5740 Stop Pawl Hinge Pin Set Screw for 12312
446c 783 Feed and Feed Lifting Eccentric Set Screw
for 12428 and 20283
446c 783 Feed Cam and Feed Lifting Eccentric Set
Screw for 12197
446c 783 Stop WheelSet Screwfor 43807and 43943
447f 2038 Binder Leveling Screw for 25657
448c 783 Arm Shaft Bushing (back) Set Screw for
31-42 Machine
448c 783 Arm Shaft Flanged Bushing (back) Set
Screw for 31-15, 31-16, 31-19, 31-20,
31-22, 31-24, 31-27, 31-32, 31-34, 31-35,
448c 783 Balance Wheel Set Screw for 4370 and
12358
448c 783 Lifting Lever Pin Set Screw for 12237and

20340
NO. 1PLATE NAME
448c 783 Needle Bar Crank and Idfting Cam Set

Screw for 43803
Set Screw for 19365
448c 783 Needle Bar Crank Set Screw for 16569...
448c 783 Oscillating Rock Shaft Hinge Pin Set
Screw
448c 783 Presser Bar Lifting Lever Pin Set Screw
for 12284
448c 783 Strip Folder Hinge Bracket. Set Screw for
28706
448c 783 Table Belt Guide (lower) Pulley Shaft Set
Screw for 14229
448c 783 Table Belt Guide (upper) Pulley Shaft Set
Screw for 10857
448c 783 Thread Take-up Spring Regulator Set
Screw
449c 5746 Plaiting Gear (intermediate) Stud Set
Screw for 20423
453c 783 Lifting Presser Bar Guide Bracket Set
453c 783 Needle Bar Connecting Stud Set Screw
for 12384 and 20368
453c 783 Oscillating Shaft Crank Set Screw for 44135
453c 783 Presser Bar Guide Bracket Set Screw for
12326, 20059 and 43917
453c 783 Reciprocating Spring Presser Shaft Crank
(front) Set Screw for 20252
453c 1323 Ruffling Eccentric Collar Set Screw for
24208
453c 1323 Ruffling Eccentric Set Screw for 24207...
453c 783 Thread Unwinder Thread Guard Rod Set
Screw for 27940
456c 773 Reciprocating Spring Presser Shaft Collar
Set Screw for 20251
456c 773 Thread Unwinder Thread Guard Rod
Coupling Set Screw for 41639
457c 5806 Corder Cord Guide Bed Leveling Screw
for 120206
12390 and 19447
458c 5750 Plaiting Eccentric Set Screw for 20424.,.
19447, obsolete
460c 1323 Ruffling Arm Shaft Collar Set Screw for
6533
NO. PLATE NAME

460c 783 Thread Retainer Set Screw for 31-15,
31-16, 31-19, 31-20, 31-22, 31-24, 31-27,
31-32, 31-35, 31-37 and 31-39 Machines,
obsolete
460c 783 Thread Retainer Stud Set Screw for 12402,
obsolete
462c 773 Clamp Stop Motion Flanged Bushing Set
Screw for 4933
462c 773 Feed Lifting Rock Shaft Crank (back) Set
Screw for 3043 and 12200, obsolete
462c 773 Shuttle Driver Set Screw for 12444 and
19406, obsolete
465f 6252 Edge Guide Bed Leveling Screw for 36187
468c 2038 Box Plaiter Sliding Bracket Locking Pin
Spring Bushing Set Screw for 26439...
514c 2038 Box Plaiter Sliding Bracket Locking Pin
for 28352
534r 3817 Driving Segment Bolt with 1510r, for
25255
560b 984 Ruffler Ruffling Blade Lever Adjusting
Thumb Screw for 26230 and 28816....
578d 5837 Throat Plate Cutting Bar Screw for 5732
578d 5837 " " Slide Adjusting Screw for
5732
589e 2038 Binder Guide (upper) Clamping Screw for
25658 and 25659
591f 782 ShuttleTensionRegulatingScrewforl2417,
19293, 20591, 20651, 20653, 20756,
24074 and 62740
592b 782 Shuttle Bobbin Case Latch Stop Screw for
12417, 19293,, 20591, 20651, 20653,
20756, 24074 and 62740
597c 2011 Driving Attachment Shaft Driving Pulley
Clamping Screw for 27072
602d 8628 Quilter Guide Disengaging Sleeve Spring
Screw for 120485
620f 782 Knife Adjusting Screw for 19391
620f 782 Needle Bar Thread Guard Set Screw for
16568
621d 1317 Knife Bar Lifting Spring Guide Bracket
Screw for 24128.*.
624d 8628 Thread Retainer Set Screw for 31-15,
31-16, 31-19, 31-20, 31-22, 31-24, 31-27,
31-32, 31-34, 31-35, 31-37 and 31-39
Machines
647c 774 Knife Bar Driving Crank Bracket Screw
for 31-35 Machine
NO. PLATE NAME
647p 774 Shuttle Race Screw, obsolete, use 145d. ..

648d 782 " " Back Spring Screw for 5707,
12489, 19404, 20005 and 24010
651D 2011 Hemmer Block Spring Screw for 120078..
651d 2011 Needle Clamp Thread Guard Screw for
24103
656e 2038 Binder Folder Slide Carrier Adjusting
Screw 25672
656e 2038 Binder Guide (centre) Screw for 25657...
662d 2035 Ruffler Separating Blade Screw for 26670
and 26671
662d 782 Shuttle Race Cap Screw for 5707, 12489,
19404 and 20005
665d 1388 Binder Folder Guide Screw for 120120...
665d 1388 Presser Foot Braid Guide Screw for 36182
665d 5645 " " Cord Guide Screw for 36022
665d 2633 " " Guide Screw for 28353
665d 1388 *' " Spring Guide Screw for
28726 and 28909
665d 1371 Ruffler Ruffling Blade Screw for 28816...
665d 1344 Ruffling Blade Screw for 28845
671d 5807 Binder Edge Guide Thumb Screw for 36344
671d 1314 " Folder and Ribbon Tension Thumb
Serew for 26701
688j 783 Pressure Regulating Thumb Screw for
31-15, 31-16, 31-19, 31-20, 31-22, 31-24,
31-27, 31-32, 31-34, 31-35, 31-37 and
31-42 Machines
689c 782 Lifting Presser Bar Lifter Screw for 31-19
Machine
689c 782 Presser Bar Lifter Screw for 31-15, 31-16,
31-20, 31-22, 31-24, 31-27, 31-32, 31-34,
690e 782 Thread Take-up Crank Wedge Serew....
692d 783 Bobbin ^^•inder Bracket Screw for 12172,
12202, 12337, 20309 and 20498
692d 783 Driving Attachment Bracket Screw for
12478 and 20141
692d 783 Starting Bell' Crank Bracket Screw for
31-42 Machine
693d 782 Driving Attachment Driving Arm Hinge
696e 782 Needle Bar Plug Screw, obsolete
706d 1371 Presser Foot (right) Shank Stop Screwfor
28816
NO. PLATE NAME
714d 5755 Strip Guide Thumb Screw for 31-37 Ma

chine
725e 1387 Shuttle Race Slide Spring Screw for 12432
725b 1387 Presser Foot Adjustable Guide Screw for
26802
732d 1366 Guide Thumb Screw (short) for 25866,
25873, 25874 and 28658
732d 1366 Tucker Tuck Guide Plate Bracket Thumb
Screw for 26683
742e 1323 Ruffling Eccentric Connection Cap Screw
for 24219
Position Screw for 19365
743c 1317 Needle Bar Crank Position Screw for 16569
748e 782 Arm Screw (back)
748n 3817 Brace Screw for 25255, 25265, 25279 and
25284
766d 782 Lifting Lever Link Hinge Screw (Foot and
Knee Lifters) for 12445, 20008, 20256,
20290, 20341, 20466, 43928, 43929,
43930, 43931, 43933 and 43934
766d 782 Presser Bar Lifting Lever Link Hinge
775e 782 Presser Bar Lifting Lever Lifter Roller
Cap Screw for 12286
775e 782 Thread Take-up LeverCap Screw for43990,
43991 and 44179
794e 5752 Plaiting Lever Connecting Rod Adjusting
Screw for 20434
800c 5739 Presser Bar Lifting Lever Lifter Adjusting
801e 5739 Presser Bar Lifting Lever Lifter Hinge
802d 782 Lifting Lever Hinge Screw (Foot and
Knee Lifters) for 12445, 20008, 20256,
20290, 20341, 20466, 43928, 43929,
43930, 43931, 43933 and 43934
802d 782 Presser Bar Lifting Lever Hinge Screw for
31-42 Machine
808f 782 Needle Clamp Screw for 4303 and 24103..
808p 782 Ruffler Needle Clamp Screw for 26017...
811d 5742 " RuiHing Blade Hinge Screw for
26018
812b 984 Ruffler Ruffling Blade Lever Adjusting
Thumb Screw for 26018 and 26724....
NO. PLATE NAME
818d 783 Feed Regulator Thumb Screw for 43993

and 44188
834d 5740 Feed Regulating Thumb Screw for 31-32
Machine
835d 5740 Feed Regulator Handle Screw for 31-32
Machine
840d 5740 Stop Wheel Block Screw for 43807 and
43943
854e 783 Arm Screw (front)
855c 783 Needle Bar Crank Position Screw for
12385, obsolete
858c 783 Needle Bar Crank Set Screw for 12385
and 20188
858c 783 Table Belt Guide (lower) Pulley Shaft Oil
Hole Plug Screw for 14231
861d 5742 Driving Attachment Driving Friction
Pulley Oil Hole Plug Screw for 16594..
878j 783 Oscillating Rock Shaft Hinge Pin Oil Hole
Stop Screw, obsolete
879d 2026 Corder Arm Locking Screw for 25792....
880r 5843 Brace Section Screw for 46662
882c 5752 Plaiting Gear (front) Set Screw for 20426
896e 773 CrankConnectingRodCapScrewforl2365,
12496 and 20197
899j 1105 Knife Grinder Knife Clamping Screw for
27658, 27681, 27682 and 126393
904f 8628 Needle Set Screw for 16568
907d 782 Shuttle Race Back Spring Screw for 24120,
24325, 24415 and 24419
908c 773 Crank Connecting Rod Hinge Screw
910f 2039 Welt Guide Adjusting Screw for 26150...
914f 2038 Box Plaiter Sliding Bracket Arm Screw for
28352
936e 773 Needle Bar Screw Bushing for 31-15,
31-16, 31-19, 31-20, 31-22, 31-24, 31-27,
31-32, 31-34, 31-37, 31-39 and 31-42
Machines
939d 5843 Tucker Edge Guide Thumb Screw for
26685
940d 5742 Binder Arm Hinge Screw for 120166
940f 1366 Edge Folder Holder Hinge Screw for 36293
940d 5742 Guide Holder Hinge Screw for 28969 and
120428
965d 1312 Lifting Presser Bar Bell Crank Driving
Arm Shaft Bracket Screw for 31-19 Ma
chine
NO. PLATE NAME
966e 5806 Feed Lifting Rock Shaft Crank Connecting

Rod Cap Screw for 12430 and 43976...
972c 3826 Band Wheel Set Screw for 25301
Stud for 19449
1036c 7790 Binder Leveling Screw for 120242
1036c 5806 " " " (back) for 36340..
1044d 1377 Corder Cord Guide Arm Hinge Screw for
120207
1049d 1371 RufHer Ruffling Blade Lever Stop Screw
for 28816
1053d 2006 Shuttle Bobbin Case Guide Plate Screw
for 24120, obsolete
1053d 2006 Shuttle Rs\ce Cap Screw for 24998,25000,
62502 and 62623
1054c 5837 Starting Bell Crank Roller Screw Stud lor
1885
1065c 2011 Needle Bar Crank Position Screw for
20188
1072f 1317 Needle Set Screw for 16568, obsolete
1099f 2019 Reciprocat ing Spring Presser Blade Holder
Hinge Screw for 20253
1101c 2035 Ruffler Driving Lever Hinge Screw for
26724 and 28816
1108f 1323 Rufliing Regulator Thumb Screw for 31-27
Machine
1115f 1370 Tucker Needle Clamp Screw for 26719...
1115f 1370 Ruffler Needle Clamp Screw for 26719...
1128e 1366 Feed Regulator and Reverser Hinge Screw
for 31-32 Machine
1128e 2009 Feed Regulator Hinge Screw for 31-15,
31-16, 31-19, 31-20, 31-22, 31-24, 31-27,
31-34, 31-35 and 31-37 Machines
1141d 5806 Binder Guide (lower) Screw Stud for
26696
1149c 5742 Thread Unwinder Spool Rest Set Screw
for 60455 and 00701.
1162c 1306 Knife Bar Crank Coupling Pin for 24432
1253c 5740 Presser Bar Stop Collar Set Screw for
43804
1266c 5806 Binder Leveling Screw (front) for 36340..
1266c 5806 Shuttle Driver Set Screw for 12444 and
19406
1312c 3817 Band Wheel Set Screw for 25329
1362c 5739 Needle Bar Crank and Lifting Cam Posi
tion Screw for 43803
1368J 8630 Binder Screw for 120494 and 120495
NO. PLATE NAME
1423d 5742 RufOin^ Scparatinp lilade Screw for 31-27

Machine
1425b 5742 Binder Folder Ilinnc Screw for 35354....
1425d G252 Edfjc Guide Ann Ilinse Screw for 36188..
1425i) 932 Heniiner Folder 11in}?e Screw for 35081...
1443.1 8025 " Shank St-rew
1480d 8028 Belt Guard Retaining Screw for 120365
1494i> 5739 Driving Pulley Screw for 31-42 Machine
1507r 3820 Band Wheel Crank Screw Centre Nut for
40029
1507k 5742 Starling TreadU; Screw Centre Nut for
40001
1507r 3820 Treadle Screw Centre Nut for 40029
1508c 783 Driving Attachment Driving .Arm Friction
Plug Adjusting Screw Nut for 10522
and 19200
1508.1 1105 Knife Grimier limcry AVhccl Clamping
Nut. for 00934
1508r 3817 Leg Stay Rod Nut for 25255
1510n 3817 Driving Segment Bolt Nut for 534
1513.1 783 Feed Lifting Rock Shaft Screw Centre
Nut. for 50814
1513.1 783 Feed Rock Shaft Screw Centre Nut for
50814
1513.1 783 Starting Bell Crank Roller Screw Stud
N\it. for 12344
1510.1 1105 Knife Grinder Emery Wheel Shaft Screw
Centre Nut for 00583
1510.t 1105 Knife Grinder Knife Holder Guide Bar
Bracket Screw Centre Nut for 60583..
1517j 5740 Starting Bell Crank Hinge Screw Nut for
12344
1518.1 783 Crank Connecting Rod Hinge Screw Nut
for 375, oh.solete
1518.1 783 Feed Connecting Link Hinge Screw Nut
for 43992, 43993 and 44188
1518j 783 Feed T'orked Connection Hinge Screw
Nut for 43992, 43993 and 44188
1518.1 783 Feed Lifting Rock Shaft Crank Connect
ing Rod Hinge Screw Nut for 31-15,
31-10, 31-19, 31-20, 31-22, 31-24, 31-27,
31-32, 31-34, 31-35 and 31-37 Machines
1518j 783 Lifting Pres.ser Bar Bell Crank Driving
Nut for 31-19 Machine
1518j 783 Oscillating Shaft Crank Roller and Screw
Stud Nut for 12390, oKsolete
NO. I'LATE NAME

1518.1 783 Oscillating Shaft Crank Slide Block Screw
Stud Nut for 19447 and 44135
1518.1 783 Reciprocating Spring Prcs.ser Regulator
Crank Roller and Screw Stud Nut for
20247
1519.1 783 Feed Bar Screw Centre Nut for 56813...
1520j 783 Lifting Presser Bar Lifter Screw Nut for
31-19 Machine
1520r 3826 Pitman Rod Lock Nut for 46520
1520r 3826 " " (upper) Lock Nut for 46656
1520.1 783 Pres.ser Bar Lifter Screw Nut for 31-15,
31-16, 31-20, 31-22, 31-24, 31-27, 31-32,
31-34, 31-35 and 31-37 Machines
1520j 5739 Presser Bar Lifting Lever Lifter Adjust
ing Screw Nut for 31-42 Machine
1521e 772 Lifting Lever Connecting Rod Lock Nut
(Foot and Knee Lifters) for 12445,
20008, 20256, 20290, 20341, 20466,
43928 to 43931, 43933 and 43934
1.521J 5753 Plaiting Rock Shaft Lever Connecting
for 31-37 Machine
1528d 5842 Roller Arm Screw Nut for 1928
1536d 6254 Binder Folder Slide Carrier Adjusting
Thumb Nut for 36463
1550h 783 Bobbin Winder Stop Latch Adjusting
Screw Nut for 16516 and 19258
I55O11 5745 Plaiting Blade Holder (lower) Spring Stop
Screw Nut for 31-37 Machine
1550h 5745 Plaiting Blade Holder (upper) Spring Stop
Screw Nut for 31-37 Machine
1550j 783 Prc.s.ser Foot Roller Screw Nut for 20243..
1550h 1371 Rufller RulHing Blade Holder Stud Nut
for 28816
1550h 1344 Ruffling Blade Holder Stud Nut for 28845
1560c 783 Tension Begulating Thumb Nut for 33892
and 44141
1562j 2014 Bobbin WinderTen.sion Regulating Thumb
Nut for 27308
1562j 2014 Thread Retainer Regulating Thumb Nut
for 43809
1564d 2038 Bo.v Plaiter Sliding Bracket Locking Pin
He.ad for 28352
1564d 2038 Knife Bar Crank Coupling Pin Head for
244.32
1566d 2024 Binder Guide (centre) Thumb Nut for
25664
NO. PLATE NAME
ISOGd 2024 Binder Guide (lower) Thumb Nut for 26694

1571d 1949 Binder Guide (upper) Clamping Thumb
Nut for 25664
1577d 2024 Binder Folder Guide (upper) Thumb Nut
for 25650, 25653 and 25656
1579c 783 Driving Attachment Driving Arm Hinge
Screw Nut for 16522 and 19260
1582d 984 Ruttlcr Driving Lever Sjjring Adjusting
Nut for 26230
1603e 984 Ruflier Rullling Blade Lever Adju.sting
Thuinl) Screw Nut for 26230 and 28816
1619e 773 Crank Connecting Rod Hinge Screw Nut
1620j 5806 Bobbin Winder Frame Hinge Screw Nut
for 27647, 27650, 27651 and 27875
1621e 984 Rullier Rulliing Blade Lever Adjusting
Thumb Screw Nut for 26018 and 26724
1640c 2035 Rufflcr Driving Lever Spring Adjusting
Nut for 26724
1641e 1323 Ruffing Regulator Stop Screw Nut for
31-27 Machine
1641e 1323 Rufi'ing Regulator Thumb Screw Nut for
31-27 Machine
1647c 1371 RuHIer Driving Lever Hinge Screw Nut
for 2S816
1648e 5740 Pre.s.sure Regulating Thumb Screw Lock
1666d 984 Ruflier Driving Lever Spring Adjusting
Nut for 26018
1667r 5750 Plaiting Cam Thumb Nut for 31-37 Ma
chine
1668c 5745 Plaiting Blade Holder (lower) Hinge Stud
1668c 5745 Plaiting Blade Holder (upper) Hinge Stud
1668J 5752 Plaiting Regulating Stud Nut for 31-37
Machine
1670u 3826 Pitman Rod Ball Screw Bearing Nut for
46630
1670r 3826 Pitman Rod (lower) Ball Screw Bearing
Nut for 46630
1813 783 Feed Lifting Rock Shaft Oank Roller and
Stud for 12376
1852 1377 Guide Roller for 28658
1885 5740 Starting Bell Crank Roller with 190d,
1054c and 5968, for 12344
1902 783 Oscillating Shaft Crank Roller and Screw
Stud for 12390, ob.solete
NO. PLATE NAME
1904 770
Needle Bar Connecting Stud Roller (roller
only) for 12384
Crank Roller (roller only) for 1942
1928 2039 Roller, in. diam., fine, with 386d and
1528d, for 19394
Crank Roller and Screw Stud with 229d,
1904 and 12424, for 20247
1943 1370 Tucker Needle Clamp Roller for 26719...
1943 1370 Ruffler Needle Clamp Roller for 26719...
Rod Crank Roller and Screw Stud for
20444
1976 6739 Presser Bar Lifting Lever Lifter Roller
(roller only) for 12286
1988 6262 Edge Guide Arm Roller and Screw Stud
for 36185
2018 1101 Starting Bell Crank Pitman Stud Washer
for 12344
2020 2003 Clamp Stop Motion Clamp Washer for
3022
for 31-15, 31-16, 31-19, 31-20, 31-22,
31-24, 31-27, 31-32, 31-34, 31-36 and
31-39 Machines
2022 773 Driving Attachment Driving Arm Pitman
Crank Pin for 44176
2022 773 Driving Attachment Starting Crank Pin
for 44176 :
2022 773 Knife Bar Crank Pin for 24433
2049 773 Feed Lifting Rock Shaft Crank (back) Pin,
obsolete
2049 773 Lifting Pres.ser Bar Bell Crank Driving
Arm Pin for 19361
2049 773 Oscillating Shaft Crank Pin
(back) Pin for 31-24 Machine
2049 773 Shuttle Driver Pin
2062 771 Presser Bar Lifter for 31-16, 31-16, 31-20,
31-27, 31-32, 31-34, 31-35 and 31-37
Machines
2102 3471 Bobbin Winder Tension Disc for 226462.,
2102 6806 Tension Disc for 44118 and 44149
2106 2014 Bobbin Winder Tension Thread Guide for
27308
NO. PLATE NAME
2113 1388 Presser Foot Guide Spring Steady Pin for

28773
pulley, for 3022, for 31-16,31-16,31-19,
31-20, 31-22, 31-24, 31-27, 31-32, 31-34,
2269 773 Bobbin Winder Stop Latch Stop Pin for
16518
2269 773 Driving Pulley Spring Washer Stop Pin
for 43806 and 43941
2273 2038 Strip Folder Stop Pin for 28706
2291 1317 Knife Screw Washer for 19391
2291 1344 Ruffling Arm Adjusting Screw Washer for
26890
2296 2038 Box Plaiter Sliding Bracket Locking Pin
Spring Bushing for 28352
2297 2038 Box Plaiter Sliding Bracket Locking Pin
Spring for 28352
2297 2038 Knife Bar Crank Coupling Pin Spring for
24432
2301 5843 Box Plaiter Sliding Bracket Stop Pin for
28349 and 28350
2301 1317 Knife Bar Stop Pin for 19297
2301 2035 Ruffler Ruffling Blade Lever Disengaging
Lever Stop Pin for 26724
2362 1375 Edge Guide Slide Cap (left) Steady Pin
for 26803
2362 1376 Hemmer Folder (left) Steady Pin for
28682
2362 1376 Hemmer Folder Disengaging Lever Stop
Pin for 28682
2419 2006 Shuttle Race Back for 19404, 24010, 24120
and 24325
2455 2014 Bobbin Winder Tension Disc for 27308..
2455 2014 Threa<l Retainer Disc for 43809
2521 1371 Pre.sser Foot (right) S|)ring for 28814....
2521 1371 Shuttle Bobbin Ca.se Latch Spring for
20.591 and 206.53, obsolete
2523 771 Shuttle Bobbin Case Position Finger Rivet
for 12417, 19293, 20591, 20651, 20653,
20756, 24074 and 62740
2523 1317 Knife Bar Lifting Spring Guide Pin for
24906
2526 5842 ShuttleTonsionSpringfor 12417, obsolete,
use 1.5098
2531 767 Shuttle Race Back for 5707, 12489, 20005,
24415 ami 24419
NUMERICAL LIST OF PARTS 20S
NO. PLATE NAME

2532 772 Presser Foot Hinge Pin for 20157, 20311,
20346 and 24489, obsolete
2532 1371 Pre.sser Foot (right) Hinge Pin for 28814,
obsolete
2532 772 Shuttle Race Back Position Pin for 5707,
12489, 19404, 20005, 24010, 24120,
24325, 24415 and 24419
2533 767 Shuttle Race Back Spring for 5707,12489,
19404, 20005, 24010, 24120, 24325,
24415 and 24419
Clamping Lever Hinge Pin for 28953..
2656 1371 Presser Foot (right) Shank Spring for 28816
2656 2669 " " Tension Plate Spring for35447
2749 5742 Binder Folder Hinge Screw Friction
Washer for 35354
2762 1206 Driving Attachment Treadle Stop Collar
with 362f, for 14233 and 15130
2763 819 Rock Shaft for 4880 and 12250
2764 5735 " " Hanger (hack) with two wood
2765 5735 Rock Shaft Knee Arm for 2768 and 20463
2766 766 " " " " Hub with 356c, for
2768
2767 5735 Rock Shaft Knee Arm Plate with 356c,
for 2768 and 20463
2768 Rock Shaft Knee Arm complete, for 12250
Nos. 2765 to 2767
2770 819 Rock Shaft Stop Dog with 356c, for 4880,
12250 and 20465
2809 8633 Machine Hinge Connection Hinge Pin for
44244
2827 773 Face Plate Thread Guard (upper) with
8505, for 12367, 16559,19355 and 20058
pulley, for 3022, for 31-15, 31-16, 31-19,
31-20, 31-22, 31-24, 31-27, 31-32, 31-34,
2877 818 Driving Attachment Treadle Pitman Rod
(upper) for 15130, ob.solete
2878 363 Starting Treadle Stand for 43815
2878 363 Driving Attachment Treadle Stand for
27642, obsolete
2921 772 Tension Disc for 44147
2923 772 Tension Spring for 44147 and 44149
NO. PLATE NAME

2928 774 Driving Attachment Driving Arm Brake
(leather) for 16518
2972 771 Shuttle Bobbin Case Latch for 15003, ob
solete
2973 771 Shuttle Bobbin Case Latch Lever for 15003,
15141, 20650 and 20652
2974 771 Shuttle Bobbin Case Latch Lever Fulcrum
Pin for 15003, 15141, 20592, 20650 and
20652
2975 771 Shuttle Bobbin Case Latch Spring for
12417, 19293, 20651, 20756, 24074 and
62740
2996 771 Shuttle Bobbin for 12392,12487 and 19292
3022j Clamp Stop Motion complete for 31-15,
31-16, 31-19, 31-20, 31-22, 31-24, 31-27,
31-32,31-34, 31-35 and 31-39 Machines,
Nos. 248a, 256j, 2020 and 4933
*3023 Clamp Stop Motion Flanged Bushing for
4933
3033 770 Feed Connecting Link for 43992, 43993
and 44188
3039 768 Feed Regulator for 43993 and 44188
3043 770 " Lifting Rock Shaft Crank (back)
with 462c, for 12375, 12380 and 20239,
obsolete
3094 773 Thread Take-up Crank Wedge
3146 1353 Binder Thumb Screw Washer for 120533
3146 1353 Guide Thumb Screw Washer for 25866,
25873, 25874, and 28658
4302 773 Needle Bar Thread Guide for 31-15, 31-16,
31-19, 31-20, 31-27, 31-32, 31-34, 31-37,
4303 773 Needle Clamp with 808p, for 31-15, 31-16,
31-19, 31-20, 31-27, 31-32, 31-34, 31-37,
4307 772 Shuttle Race Slide Spring for 12396,12432
and 20450
pulley, with two 448c, for 31-15, 31-16,
31-19, 31-20, 31-22, 31-24, 31-27, 31-32,
31-34, 31-35, 31-37 and 31-39 Machines
4604 2027 Corder Bow Rivet for 26649 and 26938..
4604 2061 Separating Blade Holder Spring Stop Pin
for 35280
4604 2038 Tucker Cloth Guide Slide Rivet for 26377
4604 2038 Tucker Tuck Smoothing Spring Rivet for
26377
NO. PLATE NAME
4621 5843 Shuttle Race Cap Steadj' Pin for 19404,

obsolete
4784 1353 Oscillating Rock Shaft Oil Pad for 12387,
12498 and 24105
4822 2045 Wrench for 1521 and 1628 (Attachments
and Accessories)
4855 1312 Lifting Presser Bar Lifter for 31-19 Ma
chine
4879 2004 Foot Lifter Chain Connecting Link for
4885
4880 819 Foot Lifter Rock Shaft complete for 20008
20290, 43928 and 43929, Nos. 2763,
2770, 7125, 12243 and two each 6337
and 12242 (Foot Lifters)
Nos. 4881 TO 4884 for 4885
4881 819 Treadle

4882 2004 " Shaft
4883 2004 " Spring
4884 819 " Stand
4885 819 Foot Lifter Treadle complete for 20008,
20290, 43928 and 43929, Nos. 4879,
4881 to 4884 and two wood s<;rews 1 in.
No. 16 (Foot Lifters)
4933 2003 Clamp Stop Motion Flanged Bushing
3023 with two 462c, for 3022j
Spring Hook for 25424
Spring Hook for 25428
5596 768 Bell Crank for 56848
6598 768 Bell Crank complete, for 12445, 20008,
20256, 20290, 20341, 20466, 43928 to
43931, 43933 and 43934, Nos. 5735 and
56848 (Foot and Knee Lifters)
5599 768 Bell Crank Bracket for 56848
5601 773 " " Hinge Pin for 56848
5670 Foot Lifter Chain, length 26 in. to 35 in.
(Foot Lifters) for 20008, 20290, 43928
and 43929
5707 767 Shuttle Race complete for 31-15 and 31-16
Machines, Nos. 648d, 2531, 2533, 5708,
5709 and two each 662d and 2532, obso
lete
6708 Shuttle Race Body for 5707, obsolete
5709 767 " " Cap for 5707, obsolete
5726 1271 Knife for 31-35 Machine
NO. PLATE NAME
Nos. 5729 TO 5731 tor 5732
5729 Throat Plate Body

5730 1271 " " Cutting Bar
5731 1271 " " Slide
5732 1271 Throat Plate complete for 19103 and 24573,
Nos. 5729 to 5731 and three 578d
5735 1353 Bell Crank Spring for 5598
5944 5843 Tucker Tuck Guide Plate Guide Pin for
26571
5960 768 Bobbin Winder Friction Wheel (leather)
for 12171, 12201, 16515, 20308, 43982
and 43983
5961 768 Bobbin Winder Friction Wheel Washer for
12171, 12201, 16515, 20308, 43982 and
43983
5963 768 Bobbin Winder Spindle Flange for 12171,
12201, 16515, 20308, 43982 and 43983..
5968 5837 Starting Bell Crank Roller Screw Washer
for 1885
5990 2011 Presser Bar Lifter for 31-22 Machine....
6037 1377 Corder Cord Guide Bracket Rivet for
26796
(lower) Spring Washer for 14233 and
15130
6055 5843 Machine Hinge Bolt Nut Washer for
44180
6055 5741 Starting Treadle Extension Bolt Nut
Washer for 43815
6055 5741 Starting Treadle Extension Screw Washer
for 43815
6267 2028 Hemmer Folder •
6337 819 Rock Shaft Lifting Bracket with two 356c,
for 4880 and 12250
6533 1323 Ruffling Arm Shaft Collar with 460c, for
31-27 Machine
7071 1379 Binder Folder Screw Washer for 26250,
26402, 26466, 26953, 28657, 28678,
28776, 28784, 28794, 28861, 120437,
120459 and 120467
7071 2021 Binder Guide (upper) Screw Washer for
25664 and 26694
7071 2021 Binder Pressure Spring Screw IVasher for
25650, 25653, 25656 and 26694
NO. PLATE NAME
7071 2021 Binder Ribbon Tension Screw Washer for

26250, 26402, 26466, 28657, 28784,
120127, 120437 and 120459
7071 2645 Binder Screw Washer for 25664 and 28828
7071 2021 " Shank Thumb Screw Washer for
120166
7071 2645 Binder Strip Guide Screw Washer for 28861
7071 2021 Box Plaiter Centre Guide Holder Screw
Washer for 28352
7071 1379 Edge Folder Thumb Screw Washer for
36293
7071 2021 Guide Thumb Screw Washer for 28969
and 120428
7071 2021 Strip Folder Holder and Guide Screw
Washer for 35351
7071 2021 Tucker Edge Guide Slide Thumb Screw
Washer for 26597
7071 2021 Tucker Tuck Guide Plate Thumb Screw
Washer for 26683
7071 2021 Welt Guide Screw Washer for 26150
and 5670
7298 2014 Presser Foot Hinge Pin for 19336, 20270
and 120144
7336 772 Thread Take-up Spring Regulator for
44118, 44147 and 44149
7476 2038 Binder Folder Guide Block Rivet for 36457
7483 2019 Reciprocating Spring Presser Blade Spring
Hook for 20252
1 in. No. 10, for 12250
12417, 19293, 24074 and 62740..
7806 5838 Binder Folder Screw Washer for 120127..
7806 2645 " Ribbon Guide Screw Washer for
28794
7958 5741 Starting Trea.dle Pitman Stud Pin for 31-42
Machine
7958 5741 Driving Attachment Balance Wheel Fric
tion Ring Stop Pin for 16592
7958 5741 Motor Pitman Pin for 25279
8386 5746 Plaiting Cam Position Pin for 20422
8418 5842 Belt Guard Button for 8420
8419 5842 " " " Washer (leather) for
8420
NO. PLATE NAME
8420 Belt Guard Button 8418 with 8419 and

wood screw 1}4 in. No. 9 R. H. B., for
41931
for 2827
8505 773 Rufiler Ruffling Blade Rivet for 26010...
8511 773 Thread Take-up Spring for 44147 and
44149, obsolete
8582 773 Ann Dowel Pin
8905 5745 Plait ing Blade Holder (lower) Hinge Stud
Nut Washer for 31-37 Machine
8905 5745 Plaiting Blade Holder (upper) Hinge Stud
Nut Washer for 31-37 Machine
8908 2045 Wrench for 1519, 1520 and 1620 (Attach
ments and Accessories)
8909 2045 Wrench for 1513, 1517, 1518 and 51581
(Attachments and Accessories)
8975 8628 Binder Guide (lower) Rivet for 25664
(upper) Clamp with 354c, for 14233
and 15130
9079 5844 Treadle Pitman Rod Clamp with 354c, for
67177
9082 773 Driving .Attachment Treadle Bearing
Cotter Pin for 27642, obsolete
9082 773 Starting Treadle Bearing Cotter Pin for
43815
9331 8628 Belt Guard Extension Screw Washer for
126365
Wa.sher for 31-37 Machine
9558 2038 Binder Folder Steady Pin for 26695
9754 5746 Plaiting Gear (intennediate) Position Pin
for 20428
9780 2038 Binder Guide (lower) Stud for 26696 ....
9804 2019 Recii>rocat ing Spring Presser BladeSpring
for 20253
10135 2061 Separating Blade Arm Latch LeverSpring
for 35280
10141 2014 Bobbin Winder Tension Spring for 27308
10165 2633 Box Plaitcr Centre Guide Stop Pin for
28344
10236 774 Driving Attachment Driving Friction
Pulley Centre Bearing for 16594
NO. PLATE NAME

10856 5760 Table Belt Guide (upper) complete for
31-42 Machine when operated head on,
Nos. 10857 to 10859 and three wood
screws 1% in. No. 12 R. H. B
Nos. 10857 TO 10859 for 10856
10857 6760 Table Belt Guide (upper) Bracket with

448 c
10858 5757 Table Belt Guide (upper) Pulley Shaft...
10859 5760 " " " " Pulley
10875 5841 Wrench for 46660 for 25284
*11104 Arm Shaft Bushing (front)
11119 773 " Oil Tube with 52045, for oiling 12165,
12408, 16569, 19365 and 24207
11167 767 Lifting Presser Bar Spring (light) .051
wire, for 31-19 Machine
11167 767 Presser Bar Spring (light) .051 wire, for
31-15, 31-16, 31-20, 31-22, 31-24, 31-27,
31-32, 31-34, 31-35 and 31-37 Machines
11170 771 Lifting Presser Bar Spring Washer for
31-19 Machine
11170 771 Presser BarSpringWasher for 31-15,31-16,
31-20, 31-22. 31-24, 31-27, 31-32, 31-34,
31-35, 31-37 and 31-42 Machines
11204 770 Thread Take-up Lever Link Hinge Pin
for 43990, 43991 and 44179
11241 2003 Arm Spool Pin Washer (cloth)
11241 2003 Bobbin Winder Spool Washer (cloth) for
27308
11656 8631 Tape Reel Arm Steady Pin for 120535 ...
11742 5741 Starting Treadle Pitman Washer for 43816
11833 6255 Knife Grinder Knife Po.sition Pin (upper)
for 27681 and 27682
12130 5741 Thread Take-up Crank for 44179
12131 5739 Needle Bar Connecting Stud with 155c,
for 44008
12139 2004 Lifting Presser Bar Spring (medium) .055
wire, for 31-19 Machine
12139 2004 Presser Bar Spring (medium) .055 wire,
for 31-15, 31-16, 31-20, 31-22, 31-24,
31-27, 31-32, 31-34, 31-35 and 31-37
Machines
12142 780 Presser Foot for 12370, 20352 and 43979
12143 780 " " " 12369,12457,20106,20349
and 26377
NO. PLATE NAME
12144 780 PresserFootforl2372,12437,12455,12468,

12481, 20002, 20117, 20138, 20147,
20151, 20158, 20162, 20304, 20336
and 20471
12149 2014 Tension Thread Guard for 31-19, 31-35,
12150 773 Face Plate Thread Guard (lower) 44181
with 12152, for 12367,16559,19355 and
20058
12152 1375 Edge Guide Slide Spring Cover Rivet for
36760
for 12150
12152 1376 Ileinmer Slide Spring Cover Rivet for
28682
12164 Thread Take-up Lever complete for 44179,
Nos. 12165 to 12167
12165 5741 Thread Take-up Lever for 12164
12166 773 " " " Hinge Pin for 12164
and 12410
12167 5741 Tiiread Take-up Lever Link for 12164...
12168 2003 Bobbin Winder Bracket for 12172, 12202,
12337, 20309 and 20498
12169 2003 Bobbin Winder Frame for 12171 and 12201
12170 773 " " Spring for 12172, 12202,
12337, 16522,19260, 20309 and 20498..
12171 2003 Bobbin Winder Frame complete for 12172,
Nos. 333u, 5960, 5961, 5963, 12169 and
15077
12172 Bobbin Winder complete for 4370, Nos.
32d, 180f, 12168, 12170 and 12171
12178 774 Driving Attachment Driving Arm Fric
tion Plug (wood) for 16522 and 19260..
12188 768 Oil Cover for 12478 and 20141, obsolete..
12193 2004 Arm Side Cover
12196 5739 Needle Bar Connecting Link with 794e,
for 44008
12197 2001 Feed Cam and Feed Lifting Eccentric
with 446c, for 44124
with 462c, obsolete, use 3043
Nos. 333d, 5960, 5961, 5963, 12169 and
15077
12202 Bobbin Winder complete for 2135 and 2862,
Nos. 32d, 180f, 12168, 12170 and 12201
NO. PLATE NAME

ing Rod Cap for 12430, obsolete
12225 768 Driving Arm Pitman Crank for 12476, for
12237 766 Lifting IjCver with 448c, for 12445, 20008,
20256, 20290, 20466 and 43933
12240 772 Lifting Lever Pin for 12445, 20008, 20256,
20290, 20466 and 43933
12240 772 Presser Bar Lifting Lever Pin for 31-42
Machine
12241 772 Lifting Lever Link for 12445,20008,20256,
20290, 20466, 43929, 43930, 43933 and
43934
12241 772 Presser Bar Lifting Lever Link for 31-42
Machine
1 in. No. 10, for 4880
and 5598
12248 8632 Machine Rest with 27130 and two wood
12250 Rock Shaft complete for 12445, 20256,
20341 and 43930, Nos. 2763, 2768, 2778,
6337 and two each 2770 and 7539
12258 1308 Presser Foot (wide) for 12369, 12457,
20106 and 20349
12259 780 Presser Foot for 12425, 12481, 19474 and
20119
12260 780 Pre.sser Foot for 12437, 12450, 20147 and
20348
12281 5760 Starting Treadle Pitman Rod for 12439
12283 5741 " " " " (lower)
Joint for 43814 ^
12283 5741 StartingTreadlePitnjanRodJointftreadle)
for 12439
12284 5738 Presser Bar Lifting Lever with 448c, for
31-42 Machine
12285 Presser Bar Lifting Lever Lifter for 12286
12286 5739 Presser Bar Lifting Lever Lifter complete
for 31-42 Machine, Nos. 775e, 1976 and
12285
12287 5757 Presser Bar Spring (light) .0345 wire, for
31-42 Machine
12298 Throat Plate, large needle hole, for 31-39
and 31-42 Machines
NO. PLATE NAME
12311 5837 Presser Foot, for shirt work, for 31-16 and
31-20 Machines
12312 2049 Starting Bell Crank Bracket with 443c,
for 12344
12313 2049 Driving Pulley for 31-42 Machine
12314 5739 " " Spring for 31-42 Machine.
12316 5738 " " Friction Ring (leather) for
43807 and 43943
12317 5741 Starting Treadle Pitman Rod (upper)
Joint for 43814
12317 5741 Starting Treadle Pitman Rod Joint (con
necting stud) for 12439
Nos. 12318 TO 12320 for 12343
12318 Starting Bell Crank

12319 5740 " " " Pitman Stud
12320 5740 " " " Stop Pin
12321 2049 Stop Pawl for 12344, oKsolete, use 44230
12322 5740 " " Hinge Pin for 12.344
12323 5740 Feed Regidator Handle Friction Spring
for 31-32 Machine
12323 5740 Stop Pawl Spring for 12344
12325 5738 " Wheel Block for 43807, obsolete....
12326 770 Presser Bar Guide Bracket with 453c, for
12327 770 Lifting Presser Bar Lifting and Releasing
Lever Bracket for 31-19 Machine
Bracket for 31-15, 31-16, 31-20, 31-22,
31-24, 31-27, 31-32, 31-34, 31-35, 31-37
and 31-42 Machines
12329 772 Tension Releasing Lever Spring for 31-15,
31-16, 31-19, 31-20, 31-22, 31-24, 31-27,
31-32, 31-34, 31-35, 31-37, 31-39 and
31-42 Machinc.s
12331 5757 Feed Forked Connection for 31-32 Ma
chine, obsolete, use 44003
12332 5740 Feed Regulator and Reverser for 43992.,
12833 5740 " " Handle for 31-32 Machine
12335 1308 Presser Foot (narrow) for 12369, 12457,
20106 and 20349
12336 2003 Bobl)in Winder Si)indle, for spool, for
43982 and 43983
12337 Bobbin Winder (Hamburg) complete for
2135 and 2862, Nos. 32i), 180f, 12168,
12170 and 43982
NO. PLATE NAME
12343 5738 Starting Bell Crank complete for 12344,

Nos. 12318 to 12320
12344 Starting Bell Crank Bracket complete, for
31-42 Machine, Nos. 16c, 1513j, 1517j,
1885, 2018, 12312, 12322, 12323, 12343,
25350 and 44230
12345 5739 Driving Pulley Friction Ring Stop Pin for
43807 and 43943
12348 5837 Presser Foot, for outside stays and strips,
for 31-15 and 31-20 Machines
12354 772 Tension Releaser, obsolete, use 20037....
*12355 Arm with 11104, for 31-15, 31-16, 31-20,
12357 767 Arm Shaft Flanged Bushing (back) for
31-15, 31-16, 31-19, 31-20, 31-22, 31-24,
31-27, 31-32, 31-34, 31-35, 31-37 and
31-39 Machines
12358 2000 Balance Wheel (power) liglit rim, 2^ in.
pulley, with two 448c, for 31-15, 31-16,
31-19, 31-20, 31-22, 31-24, 31-27, 31-32,
31-34, 31-35 and 31-39 Machines
*12360 Bed for 31-15, 31-16, 31-19, 31-20, 31-22,
31-27, 31-32, 31-34, 31-35, 31-39 and
31-42 Machines
12361 772 Machine Hinge Connection for 44140 and
44180
two 896!:, for 375, obsolete
12366 Face Plate for 12367
12367 2000 Face Plate complete for 31-39 and 31-42
Machines, Nos. 2827, 12150 and 12366
12368 767 Feed Bar for 31-15, 31-16, 31-19, 31-20,
31-22, 31-24, 31-27, 31-32, 31-35 and
31-37 Machines
the inch) for 31-15, 31-19, 31-20 and
31-22 Machines, 28654,28657 and 36293,
obsolete
the inch) for 31-15, 31-19, 31-20 and
31-22 Machines, 26466 and 28776
12371 779 Feed Dog, for shirt work, for 31-15 Ma
chine, obsolete
beveled for hemmer, for 31-15 Machine
and 26328
NO. PLATE NAME
12374 766 Feed Lifting Rock Shaft for 12375, obso

lete
31-15, 31-16, 31-19, 31-20, 31-22, 31-24,
31-27, 31-32, 31-34, 31-35 and 31-37
Machines, Nos. 3043, 12374 and 12376,
obsolete, use 44126
and 1813, for 12375 and 44126
12379 766 Feed Rock Shaft for 12380 and 20333....
12379, obsolete, use 20333
12381 767 Needle Bar (hollow) for 31-15,31-16,31-19,
31-20, 31-27, 31-32, 31-34, 31-37, 31-39
and 31-42 Machines
12382 770 Needle Bar Connecting Link with 794e,
for 43997
*12383 Needle Bar Connecting Stud for 12384 and
20368
12384 770 Needle Bar Connecting Stud complete for
43997, Nos. 453c, 1904 and 12383
12385 767 Needle Bar Crank with 855c and 8d8c,
obsolete, use 20188
12386 767 Oscillating Rock Shaft for 375 and 12387,
obsolete
4784, 12386 and 12388, obsolete
12388 767 Oscillating Rock Shaft Hinge Pin for 12387,
12498 and 24105
12389 766 Oscillating Shaft
4.57c, 1518e, 1902 and 19496, obsolete..
12391 767 Lifting Prcsser Bar (hollow) for 31-19
Machine
12391 767 Presser Bar (hollow) for 31-15,31-16,31-20,
31-22, 31-24, 31-27, 31-32, 31-34, 31-35,
12392 Shuttle, I J-J in. diam., Nos. 2996, 12393
and 12417, obsolete, use 19292
12393 771 Shuttle Body for 12392 and 19292
*12394 " Driver for 12444
12395 " Race Slide for 12396, obsolete,
use 12431
12396 Shuttle Race Slide complete, Nos. 4307,
12395 and two 240d, obsolete, use 12432
12397 772 Tension Releasing Lever for 31-19 and
and 31-42 Machines, obsolete
NO. PLATE NAME

12398 773 Tension Releasing Lever Hinge Pin for
31-15, 31-16, 31-19, 31-20, 31-22, 31-24,
31-27, 31-32, 31-34, 31-36, 31-37, 31-39
and 31-42 Machines
12399 Thread Retainer complete for 31-15,31-16,
31-19, 31-20, 31-22, 31-24, 31-27, 31-32,
31-34, 31-35, 31-37 and 31-39 Machines,
Nos. 12400 to 12402, obsolete use, 52379
Nos. 12400 TO 12402 for 12399, obsolete
12400 773 Thread Retainer Sleeve
12401 773 " " Spring
12402 773 " " Stud
12403 772 Arm Spool Pin and Thread Eyelet
12404 770 Thread Take-up Crank for 43990
12405 8633 Machine Cushion (felt) for 79758
12405 774 " Rest, felt (Attachments and
Accessories)
12408 770 Thread Take-up Lever for 12410
12409 770 " " " Link for 12410...
12410 Thread Take-up Lever complete for 43990
and 43991, Nos. 12166,12408 and 12409
and 43979
obsolete
12414 Throat Plate, large needle hole, for 12372,
20002 and 20304
20008, 20341,20466,43928 to 43931 and
43934
12416 774 Lifting Lever Connecting Rod Joint (Foot
and Knee Lifters) for 12445, 20008,
20256, 20290, 20341, 20466, 43928 to
43931, 43933 and 43934
12417 Shuttle Bobbin Case complete for 12392,
Nos. 591f, 592e, 2523, 2526, 2975, 7553
12422 5743 Throat Plate, small needle hole, for 31-39
and 31-42 Machines
Screw Washer for 19449
Crank Roller Cap Screw Washer for
1942
NO. PLATE NAME

the inch) for 31-15 and 31-20 Machines
and 26250
12427 766 Arm Shaft for 44121, 44122, 44123, 44124,
44172 and 44217
12428 767 Feed and Feed Lifting Eccentric with 446c,
for 44217 and obsolete for 31-15, 31-16,
31-20, 31-22 and 31-24 Machines
12429 2002 Feed Forked Connection for 31-15, 31-16,
31-20, 31-22 and 31-24 Machines, obso
lete
ing Rod with 12204 and two 966e, for
31-15, 31-16, 31-19, 31-20, 31-22, 31-24,
31-27, 31-32, 31-34, 31-35, and 31-37
Machines, oljsolete
12431 Shuttle Race Slide for 12432
12432 2004 Shuttle Race Slide complete for 31-15,
31-16, 31-19, 31-20, 31-22, 31-24, 31-27,
31-32, 31-31, 31-35, 31-39 and 31-42
Machines, Xos. 4307, 12431 and two
725e
12435 780 Presser Foot with 228d, for 25967 and
26279 to 26283
four teeth at right of needle (square
corner) for 31-15 Machine
12438 77G Throat Plate, large oblong needle hole, for
20329, obsolete
12439 Starting Treadle Pitman completefor31-42
Machine, Xos. 12283, 12317, 43813 and
two 12281
12440 777 Throat Plato, small needle hole, for 12437
12441 " " " " " 12371,
obsolete
12442 778 Throat Plate, small needle hole, for 12372,
20002, 20304 and 26328
12443 772 O.scillating Rock Shaft Oil Pad for 16508,
obsolete
12444 771 Shuttle Driver 12394 with two 1266c, for
31-15, 31-16, 31-19, 31-27, 31-32, 31-34,
31-35, 31-37, 31-39 and 31-42 Machines
NO. PLATE NAME
12445 Knee Lifter complete {power table or stand

25265) for 31-15, 31-16, 31-20, 31-22,
31-27, 31-32 and 31-34 Machines, Nos.
76i), 766d, 802i), 1521e, 5598, 12237,
12240, 12241, 12250, 12415, 12416 and
two 178b
12449 Tlu-oat Plate, small needle hole, for 12369,
12450 777 Feed ]3og, for cloth, 11 teeth (18 teeth to
the inch) for 31-15 and 31-20 Machines,
26655, 28342 and 35175
and 20348
12453 773 Arm Oil Tube for intermediate bearing..
12454 773 " " " with 52045, for oiling 12167
and 12409
beveled for hcminer, for shirt work, for
31-15 Machine
the inch) for 31-15, 31-19, 31-20 and
31-22 Machinc.s, 26760, 28654, 28657
ami 35245, oKsolete
Drop Feed Machines
12459 773 Oscillating Rock Shaft Hinge Pin Oil Hole
Stop Screw Washer (leather) obsolete..
and 20348
12467 781 Presscr Foot, for umbrella work-, for 31-15
and 31-20 Machines
12468 777 F(!cd Dog, 16 teeth (16 teeth to the inch)
beveled ft)r hemmer, for shirt work, for
31-15 Machine
and 20471
12470 777 Throat Plate, .small neetlle hole, for 12468
and 20471
12474 1308 Pre.sscr Foot for 12372, 12481, 20002,
20138 and 20162
12475 818 Driving Attachment Driving Ann Pitman
for 12478 and 20141
12476 774 Driving Arm Pitman Crank Spring for
12225 for 12478 and 20141, obsolete...
NO. PLATE NAME
12477 768 Driving Attachment Starting Crank Shaft

for 44176
and Treadle complete for 31-15, 31-16,
31-19, 31-27, 31-32, 31-34. 31-35 and
31-39 Machines, Nos. 210d, 692d, 12475
16522, 16592, 16594, 20372, 24355,
27072,27308,44176,126213 and two 65d
12479 768 Driving Attachment Starting Crank for
44176
12480 767 Arm Side Cap for 31-15, 31-16, 31-20,
31-22, 31-24, 31-27, 31-32, 31-34, 31-37
and 31-39 Machines
12481 778 Feed Dog for shirt work, 18 teeth (16 teeth
to the inch) for 31-15, 31-16 and 31-20
Machines
and 43978
and 43978
12484 2003 Bobbin Winder Spring for 12172, 12202
and 12337, obsolete
12486 Oil Cup Packing (felt) for 24024, obsolete
12487 Shuttle, IH in. diam., Nos. 2996, 12488
and 62740 for 31-16 Machine
12488 2013 Shuttle Body for 12487
12489 Shuttle Race (sectional) complete for 31-16
Machine, Nos. 648d, 2531, 2533, 12490
to 12494 and two each 85d, 662d and
12490 Shuttle Race Body for 12489, obsolete..
12491 2005 " " Cap for 12489, obsolete....
Nos. 12492 TO 12494 foe 12489 and 20005
12492 2005 Shuttle Race Ring
12493 2005 " " " Clamp (left)
12494 2005 " " " " (right)
12495 2014 Needle Bar Plug Screw Rivet, obsolete...
two 896b, for 908, obsolete, use 20197
12497 2001 Oscillating Rock Shaft for 908 and 1902
for 12498, obsolete, use 24104
4784, 12388 and 12497, obsolete, use
24105
14010 1206 Bed Frame Hinge Plate Rivet for 20067..
NO. PLATE NAME

*14013 Crank Connecting Rod Cap for 12365 and
12496, obsolete
14017 5736 Finger Protector Screw Washer for 31-39
Machine
14026 2061 Separating Blade Holder Stop Pin for32280
(upper) for 14233
Nos. 14229 TO 14231 for 14232
14229 5760 Table Belt Guide (lower) Bracket with

448c
14230 5760 Table Belt Guide (lower) Pulley
14231 5757 " " " " " Shaft with
858c
14232 5760 Table Beit Guide (lower) complete for
31-42 Machine, when operated head on,
Nos. 14229 to 14231 and four wood screws
IM in. No. 10 R. H. B
plete, for 14234 and 126213, Nos. 2762,
6055,14081, 27637, 27638 and two 9079
15003 771 Shuttle Bobbin Case Hinge, Nos. 2972 to
2974, for 12417 and 19293, obsolete....
15072 2014 Bobbin Winder Position Pin for 15077 and
27538
15072 1388 Presser Foot Guide Hinge Pin for 28773
15072 2658 " *' Knife Clamp Steady Pin for
28967
16077 773 Bobbin Winder Spindle with 15072, for
12171, 12201, 16515, 20308, 43982 and
43983
15098 771 ShuttleTension Springfor 19293and 24074,
obsolete
plete for 15131, Nos. 2762, 2877, 6055,
9079, 27637 and 27638, obsolete
complete for 12478 and 20141, Nos. 15130
15132 773 Driving Attachment Driving Arm Brake
Rivet for 16518
15141 " " " Hinge for 24074 and
62740, Nos. 2973, 2974 and 15140
NO. PLATE NAME
15278 771 Shuttle Tension Spring for 62740

16128 5735 Rock Shaft Manger (front) with two wood
16508 772 Oscillating Rock Shaft Oil Pad Holder
with 12443, obsolete
16514 768 Bobbin Winder Frame for 16515
16515 768 Bobbin Winder Frame complete for 16522
and 19260, Nos. 333d, 5960, 5961, 5963,
15077 and 16514
1550h, for 16522
16518 818 Driving Attachment Driving Arm with
2269,2928 and two 15132, for 16522 and
19260
16522 Driving Attachment Driving Arm complete
for 12478, Nos. 32d, 75d, 180f, 427b,
693d, 1508c, 1579c, 12170, 12178,16515
16516, 16518, 16530 and 27303
16524 Driving Attachment Balance Wheel Fric
tion Ring (leather) for 16592
16530 818 Driving Attachment Bracket for 16522
and 19260
16555 1206 Bed Frame Hinge Plate for 20067
16559 5735 Face Plate complete for 31-35 Machine,
Nos. 2827, 12150 and 16558
16563 5738 Knife Bar Driving Crank (forked) for
24433
16564 5738 Knife Bar Driving Crank Bracket for 24433
16568 5841 Needle Bar with 620f, 1904f and 24391,
for 31-35 Machine
16569 5738 Needle Bar Crank (eccentric) with 448c
and 743c, for 44123
16573 2039 Roller Arm for 19394
16586 5843 Lifting Lever Pin for 43929, 43930 and
43934
16592 818 Driving Attachment Balance Wheel (fric
tion) with 7958, 16524 and two 435c,
for 12478 and 20141
16594 818 Driving Attachment Driving Friction
Pulley, 2^ in. diam., with 861 d and
10236, for 12478 and 20141
18055 2038 Presser Foot Hinge Pin for 28691
for 31-35 Machine
19131 2012 Shuttle Bobbin for 20590,20655 and 20768
19219 1206 Bed Frame Cushion (leather) for 20067..
no. PLATE NAME
19220 1206 Bed Frame Cushion Spring for 20067... .

19221 2045 Wrench for 936, 1516 and 1619 (Attach
19223 Pre.sser Foot Shank for 20311 and 24489..
19226 1206 Bed Frame Hinge Connection for 19398. .
19229 2004 Needle Bar (hollow) for high lift, for 31-22
and 31-24 Machines
1550h,for 19260
19260 Driving -\ttachment Driving Arm com
plete for 20141, Xos. 32i), 75d, 180p,
427e, 693i>, 1508c, 1579c, 12170, 12178,
16515, 16518, 16530, 19258 and 27303
19292 771 Shuttle, I 'g in. diain., Nos. 2996, 12393
and 62740, for31-15,31-19,31-27,31-32,
31-34, 31-35, 31-37, 31-39 and 31-42
Machines
19293 771 Shuttle Bobbin Case coinplctc for 19292,
Nos. 591F, 592k, 2523,2975, 7553,15003
and 15098, obsolete, u.se 24074
19297 5738 Knife Bar with 2301, for 24128
19334 Pre.sser Foot Plate for 19336
19335 " " " Shank for 19336, 20359 and
120144
19336 1308 Pres.ser Foot (hinged) complete, for 12370,
20355,43979 and 44136, Nos. 7298,19334
and 19335
19355 5735 Face Plate complete for 31-19 Machine,
Nos. 2827, 12150 and 19354
19356 1312 Lifting Presser Bar Bell Crank for 24716
19357 1312 " " " Connect
ing Link for 24716
Nos. 19358 TO 19360 fob 19361

Arm
Arm Shaft
Arm Shaft Bracket
Arm Shaft Bracket complete for 31-19
Machine, Nos. 2049 and 19358 to
19360
Arm Eccentric Connection for 62637...
NO. PLATE NAME

453c, for 31-19 Machine, obsolete
19365 767 Needle Bar Crank and Lifting Eccentric
with 448c and 743c, for 62637
19366 1313 Vibrating Presser Bar for 24716
Nos. 19367 TO 19369 for 31-19 Machine
19367 1313 Vibrating Presser Bar Cap

19368 1313 " " " Cushion (rawhide).
19369 1313 " " " Spring
19370 1312 " " Footforl2370and43979
19372 1313 Lifting Lever Pin for 20341, 43928 and
43931
19374 1313 Vibrating Presser Foot for 12369 and 12457
19376 1313 Vibrating Presser Foot for 20106, for 31-19
Machine and for 24344 for 26956
19391 1321 Knife Holder with 620f, 2291 and two
223f, for 24128
19392 1271 Presser Foot, for ^ in. gauge and above,
for 31-35 Machine
19394 Roller Presser complete, in. fine roller,
for 26150, Nos. 1928 and 16573
19397 1206 Bed Frame Hinge Connection Cap for
19398
19398 Bed Frame Hinge Connection 19226 with
21 lE and 19397, for 20067
19402 Shuttle Race Body for 19404, obsolete...
19403 2006 " « Cap for 19404, obsolete....
Nos. 648d, 662d, 2419,2533,4621,19402,
19403 and two 2532, obsolete, use 24325
19406 2012 Shuttle Driver with two 1266c, for 31-20,
and 20162
and 20162
and 44177
and 44177
and 44144
NO. PLATE NAME

and 44144
and 44156
and 44156
457c, 1518 r, 19449 and 19496
19448 2011 Occillating Shaft Crank Slide Block for
19449
plete for 19447 and 44135, Nos. 226d,
988c, 12424 and 19448
for corset work, for 31-15 Machine,
26402, 35208, 35209, 35236, 35241,
35324, 35325, 35345, 35351 and 36906
19496 Oscillating Shaft Crank for 12390 and
19447
beveled for hemmer, for 31-15 Machine
20004 2005 " " Cap for 20005
20005 2005 Shuttle Race (sectional) complete for 31-16
Machine, Nos. 648d, 2531,2533,12492 to
12494, 20003, 20004 and two each 85d,
662d, 2532 and 21202
20008 FootLiftercompletefor31-15,31-16,31-20,
31-22, 31-27, 31-32 and 31-34 Machines,
Nos. 76d, 766d, 802d, 1521e, 4880,4885,
5598, 5670, 12237, 12240, 12241, 12415,
12416 and two 178e
20009 1258 Feed D6°g, for tailor work, for 31-15, 31-20
and 31-22 Machines, obsolete
obsolete, use 44137
for finishing knit underwear, for 31-15
Machine
20021 5761 Drip Panwith four 1 in. wire nails, for power
table, for Drop Feed Machines, obso
lete, use 44212
NO, PLATE NAME
20022 6742 Machine Rest (felt) for machine on stand

(Trimmings for End and Back Leaf
Table)
20023 2004 Lifting PresserBarSpring (heavy) .063wire,
for 31-19 Machine
20023 2004 Presser Bar Spring (heavy) .063 wire, for
31-15, 31-16, 31-20, 31-22, 31-24, 31-27,
31-32, 31-34, 31-35 and 31-37 Machines
obsolete, use 44138
20037 2009 Tension Releaser for 44147, obsolete
20039 5760 Starting Treadle Centre Bracket with
28054 and two wood screws 1 in. No. 10,
for 31-42 Machine
20040 5700 Starting Treadle Screw Centre Bracket
with 40661 and two wood screws 1 in.
No. 10, for 31-42 Machine
20057 Face Plate for 200.58
20058 5735 FacePlatecompletefor31-15,31-16,31-20,
31-22, 31-24, 31-27, 31-32, 31-34 and
31-37 Machines, Nos. 2827, 12150 and
20057
31-15, 31-16, 31-20, 31-24, 31-27, 31-32,
20060 5736 Slack Thread Regulator for 31-15, 31-16,
31-20, 31-22, 31-24, 31-32, 31-34 and
31-37 Machines
Nos. 20061 TO 20063 for 31-15, 31-16, 31-20, 31-22

31-24, 31-27, 31-32, 31-34 and 31-37
Machines, obsolete
20061 1353 Tension Screw Stud Bushing
20062 1353 " " " Flange
20063 1353 " " " " Collar
20064 2014 " Thread Guard, obsolete
20067 819 Bed Frame with two each 16555, 19398,
wood screws in. No. 12 and eight
158c, for all machines and also for 31-42
Machine when operated head on
20091 5735 Rock Shaft for 20465
the inch) for 31-19 and 31-20 Machines
and 28784
NO. PLATE N.\MB

for shirt work, beveled for hemmer, for
31-20 Machine
for heavy work on duck, overalls, etc.,
for 31-15 and 31-20 Machines
20120 1259 Throat Plate, large oblong needle hole, for
20119
for shiiii work, beveled for hemmer, for
and Treadle complete for 31-20, 31-22
12475, 16592, 16594, 19260, 20372,
24355, 27072, 27308, 44176, 126213 and
two 65d
teeth to the inch) for 31-20 Machine...
31-20 Machine
20155 Presser Foot Plate for 20157
20156 " " Shank for 20157
and 26279 to 26283, Nos. 228d, 20155,
20156 and 62527
for shirt work, for 31-20 Machine
20185 2011 Tension Releaser for 20370 for 31-22 Ma
chine, obsolete
20186 2011 Tension Releasing Lever for 31-22 Ma
chine, obsolete
20119
20188 767 Needle Bar Crank with 858c and 1065c,
for 44122, 44124, 44130, 44169, 44172
and 44217
20329, obsolete
two 896b, for 44189, 44192, 44195 to
44197, 44199, 44200, 44207 and 44217..
♦20198 Crank Connecting Rod Cap for 20197...
NO. PLATE NAME

*20237 Bed for 31-24 Machine
20238 2000 Feed Rock Shaft for 20239 and 20334....
20230 Feed Rock Shaft complete for 31-24 Ma
chine, Nos. 3043, 20238 and 20247,
obsolete, use 20334
20240 2019 Pre.sser Bar Lifter for 31-24 Machine
20241 — " Foot Body for 20243
20242 2019 " " Roller for 20243
20243 2019 Presser Foot (roller) complete for 31-24
Machine, Nos. 131d, 1550j, 20241 and
20242
Nos. 20244 TO 20246 for 20253

20244 2019 Reciprocating Spring Presser Blade
20245 2019 " " " " Holder
20246 2019 " " " " Spring
Bracket
Crank with 1518j, 1942 and two 190d,
for 20239 and 20334

20248 2000 Reciprocating Spring Presser Shaft
20249 2020 " " " " Bracket
(back)
20250 2020 ReciiirocatingSpringPresserShaftBracket
(front)
20251 2019 Reciprocating Spring Presser Shaft Collar
with 456c
(front) with 7483 and two 453c, for
20253
20253 Recij>rocating Spring Presser Shaft Crank
(front) complete for 31-24 Machine,
Nos. 1099f, 9804, 20244 to 20246, 20252
and two 233 d
(back) with 191f, for 31-24 Machine...
20290 and 43933
20256 Knee Lifter complete (power tableor stand
766d, 802d, 1521e, 5598, 12237, 12240,
12241, 12250, 12416, 20255 and two
178e
NO. PLATE NAME
20269 Presser Foot Shank for 20270

12467, 20106 and 20349, Nos. 7298,
20268 and 20269
for umbrella work, for 31-15 Machine..
20283 2020 Feed and Feed Lifting Eccentric with 446c
for 44121 to 44123, 44130, 44169 and
31-37 Machine
20284 2020 Feed Forked Connection for 43993
Nos. 76d, 766d, 802d, 1521e, 4880,4885.
5598, 5670, 12237, 12240, 12241, 12416,
20255 and two 178b
power table, for Wheel Feed Machines
for 31-32 Machine, obsolete
for 31-32 Machine
20307 2020 Bobbin Winder Frame for 20308
20308 Bobbin Winder Frame complete for 20309
Nos. 333d, 5960, 5961, 5963, 15077 and
20307
20309 Bobbin Winder complete for 12358, Nos
32d, 180p, 12168, 12170 and 20308.
20310 Presser Foot Plate for 20311 •....
12437, 12455, 12468, 12481, 20002
20117, 20138, 20147, 20151, 20158
20162, 20336 and 20471, Nos. 2532
19223 and 20310
*20312 Arm with 11104, for 31-27 Machine...
•20313 " " 11104, for 31-32 Machine...
20314 1353 Tension Releaser for 29549, obsolete..
20321 2048 Arm Shaft Bushing (back) for 31-42 Ma
chine
20329 776 Feed Dog for 31-32 Machine, obsolete
20332 2049 Arm Shaft for 44130
20333 Feed Rock Shaft complete for31-15,31-16
31-19, 31-20, 31-22, 31-27, 31-32, 31-34,
31-35 and 31-37 Machines, Nos. 12379
and 29633
NO. PLATE NAME

20334 Feed Rock Shaft complete for 31-24
Machine, Nos. 20238, 20247 and 29633
beveled for hemmer, for shirt work, for
31-15 Machine
20340 2049 Lifting Lever with 448c, for 20341, 43928
to 43931 and 43934
766d, 802d, 1521e, 5598, 12250, 12415,
12416, 19372, 20340, 21301 and two
178e
20343 781 " " with guide on bottom to the
right of needle hole, for 12369, 12450,
12457 and 20348
20345 " " Shank for 20346
12372, 12437, 12455, 12468, 12481,
20002, 20117, 20138, 20147, 20151,
20158, 20162, 20336, and 20471, Nos.
20344, 20345, 26231 and 62527
20347 2048 Reciprocating Sjmng Presser Blade
(slotted) for 31-24 Machine
for chiffon, for31-15 and 31-20 Machines
for 31-15 Machine
for general muslin work, for 31-15 Ma
chine
for 31-34 Machine
20359 781 Presser Foot (hinged) complete, for ^ in.
gauge and above, for 20355, Nos. 19335,
20358 and 26276
NO. PLATE NAME

20363 5757 Presser Bar Spring (heavy) .0405 wire, for
31-42 Machine
20364 2045 Wrench for 1648 (Attachments and Acces
sories)
20367 770 Needle Bar Connecting Stud Slide Block
for 20368, obsolete
20368 770 Needle Bar Connecting Stud complete.
Nos. 453c, 12383 and 20367, obsolete,
use 12384
20370 2048 Tension Releasing Lever for 20185 for 31-22
Machine, obsolete
Crank for 44176
Crank Spring for 12478 and 20141
♦20399 Arm with 11104, obsolete
20400 5735 " Shaft, for 44169
♦20401 -
Bed
20402 5756 Edge Guide, for 31-37 Machine, obsolete
20404 5745 Plaiting Blade (lower)
20405 5746 " " (upper)
20406 5745 " " Holder (lower)
20407 5756 " Hinge Stud
for 20438, obsolete
20408 5745 Plaiting Blade Holder (lower) Spring....
20409 5756 " Stop
for 20438, obsolete
20410 5746 Plaiting Blade Holder (upper)
20411 5746 " " " " Spring
20412 5745 " " Separating Spring
20413 5747 Cam No. 1
H it 2
20414 5747
ft it ti g
20415 5747
tt it it ^
20416 5747
ti it it g
20417 5748
5748 it tt tt Q
20418
tt ti it y
20419 5748
tt tt it g
20420 5748
20421
tt it tt g
5749
20422 5750 " " Shaft with 8386
20423 5751 " " " Bracket with 155c
and 449c
20424 5750 Plaiting Eccentric with two 458c
NO. PLATE NAME
20425 5760 Plaiting Gear (back) with two 178f

20426 5752 " " (front) with two 882c, for
44169
20427 5746 Plaiting Gear (intermediate) large, for
20428
20428 Plaiting Gear (intermediate) large, 20427
with 9754 and 20429
20429 5746 Plaiting Gear (intermediate) small, for
20428
20430 5746 Plaiting Gear (intermediate) Stud
20431 5757 " " Cover, for 31-37 Machine,
obsolete
20432 6751 Plaiting Lever
20433 5751 " " Bracket with two 443c
20434 5752 " " Connecting Rod with two
794e
20435 5752 Plaiting Lever Hinge Stud
20436 5752 " Regulating Stud
20437 5752 " " " Nut Washer....
20438 5756 " Rock Shaft for 20409, for 31-37
Machine, obsolete
20439 5752 Plaiting Rock Shaft Crank with two 200p
20440 5753 " " " Lever
20441 5753 " " " " Arm
20442 5753 " " " « " Hinge
Stud
Rod
Rod Crank with 1961
20447 5751 " " Bracket
20448 5754 " " Holder
20449 Shuttle Race Slide for 20450
20449 and two 50216e
20451 5755 Strip Guide (left)
20452 5755 Strip Guide (right)
20453 5755 " " Holder (back)
20454 5755 " " " (front)
20461 2045 Wrench for 1582 and 1668 (Attachments
and Accessories)
20462 5735 Rock Shaft Knee Arm Hub with 356c, for
20463
NO. PLATE NAME
20463 Rock Shaft Knee Arm complete for 20465,

Nos. 2765, 2767 and 20462
20464 5735 Rock Shaft Lifting Arm with 356c, for
20465
20465 5735 Rock Shaft complete for 20466, 43931,
43933 and 43934, Nos. 2764, 16128,
20091, 20463, 20464, and two 2770....
31-15, 31-16, 31-20, 31-22, 31-27, 31-32
802d, 1521e, 5598, 12237, 12240, 12241,
12415, 12416, 20465 and two 178e
20467 5762 Drip Pan with eight 1 in. wire nails, for
Stand No. 25255
beveled for hemmer, for shirt work, for
31-15 Machine
♦20490 Arm with 11104, for 31-37 Machine
20491 5751 Plaiting Gear Cover with 20492 and two
402d, for 31-37 Machine
20492 5751 Plaiting Gear Cover Plate for 20491
20498 Bobbin Winder (Hamburg) complete for
4370, Nos. 32d, 180p, 12168, 12170 and
43983
20590 Shuttle, IH in- diarn., Nos. 19131, 20591
and 20596, for 31-20 Machine, obsolete,
use 20655
Nos. 591p, 592e, 2521, 2523, 20592,
20595 and 20600, obsolete, use 20653..
20593 and 20594, for20591, obsolete, use
20652
20593 2012 Shuttle Bobbin Case Latch for 20592 and
20652, obsolete
20594 2012 Shuttle Bobbin Case Latch Lever for
20592, obsolete
20591, 20651 and 20653, obsolete
20596 2012 Shuttle Body for 20590 and 20655, obso
lete
20600 2012 Shuttle Tension Spring for 20591, obsolete
2974 and 20649, for 20651 and 20756..
NO. PLATE NAME

Nos. 591p, 592e, 2523, 2975, 20595,
2974 and 20593, for 20653, obsolete—
Nos. 591f, 592e, 2521, 2523, 20595,
20652 and 20654, obsolete, use 20651..
20654 2012 Shuttle Tension Spring for 20651, 20653
and 20756
and 20651, for 31-20, 31-22 and 31-24
Machines, obsolete
20756
Nos. 591f, 592e, 2523, 2975, 20650,
20654 and 20755
20757 5737 Shuttle Body for 20758
and 20757, for 31-20, 31-22 and 31-24
Machines
21202 5837 Shuttle Race Ring Clamp Friction Spring
for 20005
21301 1353 Lifting Lever Link for 20341, 43928 and
43931
22003 2045 Wrench for 1550 (Attachments and Acces
sories)
23219 2645 Presser Foot Edge Guide Position Pin for
28858
23258 8628 Driving Attachment Treadle Bracket (left)
Hook Friction Washer for 126206
24009 2006 " " Cap for 24120, 24998 and
62623
Nos. 648d, 2419, 2533, 62623 and two
24020 2009 Oil Cup for 24024, obsolete
24023 2009 " " Extension with 24075 for 24024,
obsolete
12486, 24020, 24023, obsolete, use 44007
24036 2020 Feed and Feed Lifting Eccentric Sleeve
for 44121 to 44123 and 44130
NO. PLATE NAME

and 19292, Nos. 591f, 592e, 2523, 2975,
7553, 15098 and 15141, obsolete, use
62740
24075 2565 Oil Cup Extension Post for24023 and 44005
24101 Needle Clamp Body for 24103
24102 2011 " " Thread Guard for 24103..
24103 2011 Needle Clamp (high lift) complete for 31-22
and 31-24 Machines, Nos. 651d, 808f,
24101 and 24102
*24104 2001 Oscillating Rock Shaft for 24105
4784, 12388 and 24104
24109 1321 Knife Holder Handle for 24128
24117 2006 Shuttle Bobbin Case Guide Plate for 24120,
obsolete
2533, 24009, 24117,24118, two 2532 and
four 1053d, obsolete, use 24325
24122 1317 Knife Bar Lifting Spring for 31-35 Ma
chine
24123 1317 Knife Bar Lifting Spring Case for 31-35
Machine
24124 1317 Knife Bar Lifting Spring Guide for 24906
24125 1317 " " " " " Bracket.
for 24906
24128 Knife Bar complete for 31-35 Machine,
Nos. 621d, 19297, 19391, 24109, 24908
and three 33.5h
24131 2014 Arrti Oil Tube with 52045, for oiling 12197,
12428 and 20283
24199 1323 Ruffling .\rm Shaft

24200 1324 " " " Bracket (right)
24201 1324 " " " " (left)
24203 1371 Ruffler Ruffling Blade Holder for 28816..
24203 1344 Ruffling Blade Holder for 28845
24204 1371 Ruffler Ruffling Blade Holder Spring for
28816
24204 1344 Ruffling Blade Holder Spring (light, right)
for 28845
24205 1371 Ruffler Ruffling Blade Holder Spring Stop
for 28816
NO. PLATE NAME
24205 1344 Ruffling Blade Holder Spring (right) Stop

for 28845
24206 1371 Ruffler Ruffling Blade Holder Stud for
28816
24206 1344 Ruffling Blade Holder Stud for 28845....
24207 1323 " Eccentricwith two453c, for44130.
24208 1323 " " ' Collar with 453c, for
44130
24210 1324 Ruffling Eccentric Connection Washer for
31-27 Machine
24211 1323 Ruffling Regulator with 225f, for 31-27
Machine
24219 1323 Ruffling Eccentric Connection with 24220
and two 742e, for 31-27 Machine
♦24220 Ruffling Eccentric Connection Cap for
24219
for 31-27 Machine and 26018
24304 1344 Presser Foot for 31-27 Machine
24305 1344 Ruffling Blade for 31-27 Machine
24323 2046 Shuttle Bobbin Case Position Plate for
24325
2533, 24323, 24998 and two each 391d
and 2532
for 26956
24355 5757 Driving Attachment Balance Wheel Oil
Cover for 12478 and 20141
24391 1321 Needle Bar Thread Guide for 16568
24412 1361 Shuttle Bobbin Case Position Plate for
24415 and 24419
24413 Shuttle Race Body for 25000 and 62502..
24414 5837 " " Cap for 25000
24415 1361 Shuttle Race complete for 31-15, 31-27,
31-32, 31-34, 31-37, 31-39 and 31-42
Machines, Nos.907d,2531,2533,24412,
25000 and two each 391d and 2532....
24418 8628 Shuttle Race Cap for 62502
24419 Shuttle Race complete for 31-19 and 31-35
Machines, Nos.907d, 2531,2533,24412,
62502 and two each 391d and 2532
24431 5841 Knife Bar Crank with 191c, for 24432...
NO. PLATE NAME
24432 Knife Bar Crank complete for 24433, Nos.

1162c, 1564d, 2297 and 24431
24433 Knife Bar Driving Crank Bracket com-
pIetefor31-35Machine, Nos.2022,16563,
16564 and 24432
24489 5837 Presser Foot (hinged) complete, for heavy
work, Nos. 19223, 24488 and 62527....
24544 Presser Foot Plate for 24546 and 24983..
24545 " " Shank for 24546, obsolete..
12425, 12481, 19474 and 20119, Nos.
24544, 24545, 26231 and 62527, obsolete
24572 2087 Throat IPlate, small needle hole, for 19474
and 35351
for 31-35 Machine
Nos. 24579 to 24582 for 31-27 Machine
24579 2014 Ruffling Blade Holder Spring (heavy, left)

24580 2014 " " " " (heavy, right)
24581 2014 " " " " (light, left)..
24582 1344 " " " " (left) Stop...
453c, for 24716
24590 5736 Lifting Presser Bar Guide Bracket Support
for 31-19 Machine
24716 Lifting Presser Bar Guide Bracket complete
for 31-19 Machine, Nos. 19356, 19357,
19366, 24589 and three 199d
24722 1271 Presser Foot, for ^ in. to fjin. gauge, for
31-35 Machine
*24906 Knife Bar Lifting Spring Guide 24124 with
2523 and 24125, for 24128
24982 Presser Foot Shank for 24983
12425, 12481, 19474 and 20119, Nos.
24544, 24982, 26231 and 62527
24998 Shuttle Race Body 24324 with 24009 and
two 1053d, for 24325
two 1053d, for 24415
Nos. 25001 TO 25003 (Trimmings for End and

Back Leap Table)
25001 3825 Back Leaf Bracket with two wood screws
1 in. No. 10
NO. PLATE NAME
25002 3825 Back Leaf Scroll Bracket with % in. No. 9

and two 1 in. No. 12 wood screws
25003 3825 Back Leaf Sliding Hinge,Nos.25149, three
25151 and six wood screws ^ in. No. 7
25016 Belt, size J4 in., length 69Hin., with
25127, from band wheel to machine, for
25265 and 25284
25057 3825 End Leaf Support complete, Nos. 25143,
25168, 25169 and two wood screws ^ in.
No. 7 (Trimmings for End and Back
Leaf Table)
25060 3825 End Leaf Support Button with wood screw
IJ^ in. No. 12 R. H. B. (Trimmings for
End and Back Leaf Table)
25082 5760 Treadle for 25279
25082 5760 Starting Treadle for 31-42 Machine
25086 3813 Wrench for 1507,1510 and 1670, for 25255
25265, 25279 and 25284
25089 5741 Starting Treadle Pitman Cotter Pin for
43816
25104 5741 Stop Wheel Pin for 31-42 Machine
25127 3817 Belt Hook for 25016, 25370, 25490 and
46657
25143 5742 End Leaf Support Lever Hinge Pin for
25057
25149 3825 Back Leaf Sliding Hinge Rod for 25003..
25151 3825 " " " " Plate for 25003
25168 3825 End Leaf Support Bracket for 25057
25169 3825 " " " Lever for 25057
25200 3825 Wrench for 972 for 25265 and 25284
25255 Stand (iron work) high speed, complete,
Nos. 25086, 25329, 25421, 25430 to
25432, 25436 to 25438, 46604, 46605,
two each 25345, 25349, 25350, 25433
and four each 534r, 748r, 1508r and
25446
25265 Stand (iron work) rocking treadle, ball
bearing pitman, complete, Nos. 25086,
25200, 25301, 46520, 46524, 82985, two
82973 and four 748r
25279 Stand (iron work) complete, for Electric
Motor, Nos. 7958, 25082, 25086, 82985,
two 82973 and four 748r
KO. PLATE NAME
25284 Stand (iron work) rocking treadle, ball

bearing pitman, complete, for foot power
and S. D. 11 or S. D. 12 Electric Motors,
Nos. 10875, 25086, 25200, 25301, 46524,
46656, 82985 two 82973 and four 748r ..
25301 3825 Band" Wheel, 16 in. diam., with 972c, for
25265 and 25284
25329 3813 Band Wheel, 16 in. diam., with 1312c, for
25255
25330 3816 Band Wheel, Brake (rubber) for 25418,
obsolete
25345 3813 Driving Segment (rack) for 25255
25349 3813 Foot Rest for 25255
25350 3817 " " Cotter Pin for 25255
25350 5740 Starting Bell Crank Pitman Stud Cotter
Pin for 12344
♦25360 Pitman Rod Ball for 46523
♦25360 " " (lower) Ball for 46658
25361 3826 " " Ball Screw Bearing for 46630
25361 3826 " " (lower) Ball Screw Bearing
for 46630
25362 3826 Pitman Ball, size ^ in., for 46520 and
46656
25370 Belt, size in., length 67^ in., with 25127,
for 25255
25371 3826 Pitman Rod Ball Bushing for 46520
25371 3826 " " (lower) Ball Bushing for
46656
25418 3814 Band Wheel Brake Lever with 443c and
25330, for 25255, obsolete
25419 3816 Band Wheel Brake Lever Hinge Pin for
25418, obsolete
25420 3816 Band Wheel Brake Lever Spring for 25418
obsolete «
25421 3814 Band Wheel Shaft for 25255
Nos. 25422 to 25424 for 46604

25422 3815 Band Wheel Shaft Driver (left)
25423 3815 " " " " "Clutch
(left)
(right) with 5564
Spring
Spring for 46605
NO. PLATE NAME
Nos. 25426 to 2542S for 46605
25426 3815 Band Wheel Shaft Driver (right)

25427 3815 « " " " " Clutch
(left)
(right) with 5564
25429 3815 Band Wheel Shaft Driving Flange with
356c, for 46604 and 46606
Nos. 25430 TO 25433 for 25255
25430 3814 Brace

25431 3813 Driving Arm (left) with 435c and 25435
26432 3813 " " (right) with 435c and 25435
25433 3816 " " Hinge Pin
25434 3815 " Pinion for 46604 and 46605
25435 3816 Foot Rest Hinge Pin for 25431 and 25432
Nos. 25436 to 25438 for 25255
25436 3813 Leg (left)

25437 3813 " (right)
25438 3814 " Stay Rod
25446 3817 DrivingSegmentBoltNutWasherfor25255
25490 Belt, size ]4 in., length 36 in., with 25127,
for 25279
25644 2024 Binder Bed with 25645, for 25650
25645 2024 " Folder for 25644
Nos. 25646 to 25648 for 25650, 25653 and 25656
25646 Binder Folder Guide (lower) with 25855

25647 2024 " " " (upper)
25648 2024 " Pressure Spring
25650 2024 Binder (adjustable, size 1) complete, Nos.
334d, 1577d, 7071, 25644 and 25646 to
25648
25651 Binder Bed with 25652, for 25653
25652 " Folder for 25651
25653 Binder (adjustable, size 2) complete, Nos.
334d, 1577d, 7071, 25646 to 25648 and
25651
25654 Binder Bed with 25655, for 25656
25655 " Folder for 25654
25656 Binder (adjustable, size 3) complete, Nos.
334d, 1577d, 7071, 25646 to 25648 and
25654
NO. PLATE NAME
Nos. 25657 to 25663 for 25664
25657 1949 Binder Bed with 656e and three 447f. ...
25658 1949 " Guide (centre, large) with 589e..
25659 1949 " " (centre, small) with 5S9e. .
25660 1949 " " (lower)
25661 1949 " " (upper)
25662 1949 " Binding Guide
25664 1949 Binder (adjustable) complete, for general
work, Nos. 207f, 233d, 156Gd, 1571d,
7071, 25657 to 25663 and two 8975...
25669 Binder Folder Slide with 25670 and 25671,
for 36457
25670 2038 Binder Folder Slide Block for 25669
25671 2038 " " " " Rivetfor25669
25672 6254 " " " Carrier with 656e,
for 36463
25673 6254 Binder Folder Slide Carrier Adjusting
Thumb Nut Guide for 36463
25677 6254 Binder Pressure Spring for 36463
25698 2024 " Folder for 26694
25703 2024 " Pressure Spring with 26698, for
26694
25705 Binder on Shank, for ^ in. tape
25706 " "iV in. tape
25707 2605 " yi in. tape
25708 " ^ in. tape
25709 " Vi in. tape
25710 " H in.tape
25711 " yi in. tape
25712 " f? in. tape
25713 " Ys in. tape
25714 " H in.tape
25715 " 1 in. tape
25721 2021 " Folder for 26250, 26466, 28657 and
28784
25722 2021 Binder Ribbon Tension complete for 26250,
26466, 28657 and 28784, Nos. 26614,
26616 and four 26615,120437 and 120459
26733 2022 Binder Folder, for Yj, in. binding, for 20402
25734 2022 Binder Ribbon Tension complete for 26402,
Nos. 26617, 26618 and seven 26486. ...
25744 1314 Binder Folder and Ribbon Tension with
nine 26486, for Yzin. binding, for 26701
25745 Binder Folder and Rii)bon Tension with
nine 26486. for Vn in. binding, for 26701
NO. PLATE NAME
25788 2026 Corder Arm with 25789, for 25792.

25789 2026 " " Tip for 25788..
25789 2027 " Bow Tip for 26649 and 26938
25790 2026 " Arm Hinge Pin for 25792....
25791 2020 " " Bracket for 25792
25792 2026 Corder ArmandBracketcompletefor26169,
26328, and 28788, Nos. 190d, 879d, 25788,
25790, and 25791
25855 2038 Binder Folder Guide (lower) Screw Stud
for 25640
25866 2045 Guide, for flush throat plate
25873 2045 " (combination)
25874 2045 " for raised throat plate
25888 2028 Hemmer Tongue
Nos. 25919 TO 25921 for 12372,12455,20002, 20117
AND 20151
25919 Hemmer (foot) ^ in. ham

25920 2028 " " in. hem
25921 " " long, in. hem, for shirts
Nos. 25922 to 25924 for 12369 and 12457
25922 2028 Hemmer (foot) in. hem
25923 " " long, in. hem, for shirts
25924 " " y in. hem
25967 1387 Presser Foot Strip Gauge for 12435 and
20157
25983 2021 Presser Foot for 26250, 26466 and 28657.
25984 2025 " " 26328
25985 2029 " " (single toe) for gathering...
25990 2029 Quilter complete, Nos. 25991 and 25992,
obsolete, use 120485
25991 2029 Quilter Guide for 25990, obsolete
25992 2029 " " Holder with two 207f, for
25990 and 28660
25993 984 Ruffler Frame with 25994 to 25996 and
26001, for 26230
Nos. 25994 to 25996 for 25993
25994 2014 Ruffler Frame Stud

25995 2014 " Block
25996 2014 " Rivet
Nos. 25997 to 26000 for 26230
25997 984 Ruffler Driving Lever
25998 984 " Spring
25999 984 " Ruffling Blade
26000 984 " Lever
NO. PLATE NAME
26001 2014 Ruffler Ruffling Blade Lever Stop Pin for

25993
26002 2014 Ruffler Ruffling Blade Clamp for 26230..
26005 984 " Driving Lever for 26018
26007 984 " Foot for 26018
26010 984 " Ruffling Blade with8505,for2601S
26011 984 " " " Lever with 26189
and 26629, for 26018
26016 984 Ruffler Frame for 26018
26017 984 " Needle Clamp with 808f, for 26018
26018 984 Ruffler (power) complete, Nos. 69d, 207f,
811d, 812b, 1621e, 1666d, 26005, 26007,
26010, 26011, 26016, 26017 and 35019,.
26026 2045 Screw Driver, machine (Attachments and
Accessories)
26080 1383 Throat Plate Needle Hole Plate for 26760
and 28342
Clamping Lever Spring Rivet for 28953
26092 2671 Ruffling Separating Blade Rivet for 43920
26092 2038 Tucker Tuck Marking Plate Rivet for
26101
Nos. 26099 TO 26101 for 26377
26099 2037 Tucker Bed

26100 2037 " Cloth Guide
26101 2037 Tucker Cloth Guide Slide with 26102 and
two 26092
26102 2037 Tucker Tuck Marking Plate for 26101...
Nos. 26105 TO 26109 for 26377
26105 2037 Tucker Tuck Marking Bar Bracket

26106 2038 " " " " " Hinge
Pin
26107 2037 Tucker Tuck Marking Bar Lifting Spring
26108 2037 " " " " PressureSpring
26109 2037 " " " " " "
Clamp with 196f
26111 2037 Tucker Tuck Smoothing Spring for 26377
26138 2039 Welt Guide Carrier Slide Switch Cam with
Shaft, for 26150
26139 2039 Welt Guide Carrier Slide Switch Cam
Shaft Head with Lever with 337d, for
26150
26143 2039 Welt Guide Bed for 26150
26144 2039 " " Cap for 26150
Nos. 26145 TO 26147 for 26148
NO. PLATE NAME

26145 2039 Welt Guide Carrier
26146 " " " Slide
26147 2039 " " " Tongue
26148 Welt Guide Carrier complete for 26150,
Nos. 233d, 26145 to 26147 and 26149..
26149 2039 Welt Guide Width Guide for 26148
26150 2039 Welt Guide (adjustable) with Switch com
plete, Nos. 240d, 910f, 26138, 26139,
26143, 26144, 26148, 26344 and three
238d
26160 Hemmer (foot) plain bottom, ^ in. hem
26161 2028 " " " " M in. hem
26162 " " " " tV in. hem
26163 " " " " ^ in. hem
for 26169
26168 2025 Throat Plate for 26166, for 26169
26169 Corder complete, for top and bottom
cording, Nos. 25792, 26166 to 26168 and
two 135d
26173 2038 Strip Folder Lock Stud for 28707
26174 2038 " " " " Spring for 28707
26189 2014 Ruffler Ruffling Blade Lever Protector
Rivet for 26011
26229 984 Ruffler Ruffling Presser Foot for 26230..
26230 984 Ruffler (power) complete, Nos. 69d, 207f,
560b, 1582d, 1603e, 25993, 25997 to
26000, 26002, 26229, 26719 and two
337d
26231 2014 Presser Foot Spring for 20346, 24546,
24983 and 28691
26249 2021 Tliroat Plate for 12425 for 26250
26250 Binder (English) complete, Nos. 190d,
207f, 12425, 25721, 25722, 25983, 26249
and two 7071
26276 2038 Pre.sser Foot Hinge Pin for 20359 and
44161
Nos. 26279 to 26283 for 12435 and 20157
26279 Presser Foot Extension, iV hi

26280 " " "
26281 1387 " " " M in
26282 " " " 3|in
26283 " " " Hin
NO. PLATE NAME
26328 Corder complete, for top cording, Nos.

12372, 12442, 25792, 25984 and two
1350
26344 2039 Welt Guide Carrier Slide Stop for 26150
26361 Seamer Edge Guide for 26658
26368 2037 Tucker Tuck Marking Bar for 26369
26369 Tucker Tuck Marking Bar complete for
26377, Nos. 26368 and 26370 to 26372
Nos. 26370 TO 26372 for 26369
26370 2038 Tucker Tuck Marking Pin

26371 2038 " Guide Pin....
26372 2038 " " " Spring
26377 2037 Tucker (power) complete, Nos. 220o, 2911)
334d, 401e, 12143, 26099 to 26101, 26105
to 26109, 26111, 26369, 26378 and three
4604
26378 2037 Tucker Leveling Plate for 26377

26401 2022 Throat Plate for 19474 for 20402
26402 Binder (English) coni])lete, for cut cloth,
Nos. 207k, 19474, 25733, 25734, 26400,
26401, two 190d and three 7071
26403 2029 Feller (foot)
26428 2028 Ilemmer (foot) H hem, for 12437 and
20147
26438 2632 Box Plaiter Sliding Bracket Cap for 28352
26439 2038 Locking Pin
Bushing with 468c, for 28352
26459 5806 Hemmer Spring Rivet for 28670
for 26466
26466 Binder (English) complete, Nos. 190i),
207k, 12370, 25721, 25722, 25983, 26465
or 35741 aiul two 7071
26485 2045 Screw Driver, shuttle tension (.-\ttach-
26486 2022 Binder Ril)l)on Tension Pin (.straight) for
25734, 25744, 25745, 26953 and 28337..
26568 2635 Tucker Edge Guide for 20597
26569 2635 " " " Slide for 26597
26570 2634 " Tuck Guide Plate for 26683
26571 2634 " " " •' Arm with 5944,
for 26683
26597 Tucker Edge Guide complete for 26085,
Nos. 287d, 7071, 26568 and 26569
NO. PL.\TE NAME

for 28678, 28731, 35226, 35354, 35681,
35855, 35863,120247,120248 and 120533
and 120001
and 120001
26607 1387 Prcssor Foot Body for 26609 to 26611 and
35016
26608 1387 Presser Foot Plato (glass) for 26609
26609 —— Presser Foot (glass plate) complete, Nos.
26607 and 26608
26610 1387 Hemmer, K in. hem, for 26607
26611 " A in- hem, for 26607
26614 2021 BinderRibbonTensionPin(beut)for25722
and 120123
26615 2021 Binder Ribbon Tension Pin (straight) for
25722 and 120123
26616 2021 Binder Ribbon Tension Plate for 25722..
26617 2022 " " " Pin (bent) for
25734 and 28337
26618 2022 Binder Ribbon Tension Plate for 25734..
26629 2014 Ruffler Ruffling Blade Lever Protector for
26011
26638 2029 Presser Foot (double toe) for gathering..
26639 " " with 22Si), for 26641
26641 2029 " " 26639 with Adjustable Guide
No. 26040, for tailor worlc,
Nos. 26642 to 26645 roii 26646
26642 Presser Foot

26643 2029 " " Guide
26644 5843 " " " Hinge Pin
26645 5843 " " " .Spring
266-40 2029 Presser Foot (.springguide) complete, Nos.
337i> and 36642 to 26645
26647 2027 Cordcr Bow for 26649
26649 2027 Cordcr (bow) complete, for top cording,
Nos. 4604, 257S9, 26647 and 2664S....
26050 2029 Presser Foot, for braiding
26651 2032 " " " folding umbrella straps
266.52 Hcinmor, in. hem, for 26655
26653 2032 " Shank for 26655, 26660, 26662,
26664, 20666, 26935, 2S948, 36521 and
30712
NO. PLATE NAME
26653 2032 Seamer Shank for 26658

26654 2032 Hemmer Rivet for 26655, 26660, 26662,
26604, 26666, 26935, 28948, 36521 and
36712
26654 2032 Scainer Rivet for 26658
26655 2031 Heininer on Shank complete, Nos. 26652
to 26654
26657 Seanicr, for umbrella work, for 26658....
26658 2032 Scaincr complete, Nos. 26361,26653,26654
and 20657
26059 llemmer for 26660
26000 2031 Ileinrner on Shank complete, ^ in. hem,
for umbrella work, Nos. 26653, 26654
and 26659
26061 Ileminer (wide) for 20662
20062 2031 Ileminor on Shank complete, Nos. 26653,
26654 and 20661
20663 llemmer for 26664
26664 2030 llemmer on Shank complete, for raw edge
silk, Nos. 26653, 26654 and 26663
20665 llemmer, H in. hem, for 26666
20666 2030 llemmer on Shank complete, Nos. 26653,
26654 and 26665
Nos. 26668 to 26671 for 26724
26668 2035 Rufflor Driving Lever Spring

26669 2035 " Frame
26670 2034 " Guide (left) with 26679 and two
6621>
20671 2035 lluffler Guide (right) with 26679 and two
6G2d
26675 2035 Ruffler Ruffling Blade for 26724
26676 2035 " " Clamp for 26724..
26678 2035 " " " Lever Disengaging
Lever for 26724
26679 2035 Rufller Separating Blade for 26670 and
26671
26683 Tucker Tuck Guide Plate complete for
26685, Nos. 58d, 287d, 732d, 7071,26570,
26571, 26684 and two wood screws 1 in.
No. 12
26684 2634 Tucker Tuck Guide Plate Bracket for
26683
26685 Tucker (long arm) complete, Nos. 939d,
26597, 26683 and 26686
NO. PLATE NAME

26694 2024 Binder(adjustable) complete, for cap fronts,
for 31-20 Machine, Nos. 334d, 1566d,
26698, 25703, 26695 to 26697, two 152p
and three 7071
Nos. 26695 to 26697 for 26694
26695 2024 Binder Bed with 9558

26696 2024 " Guide (lower) with 1141d and 9780
26697 2024 " " (upper)
26698 2024 " Pressure Spring Lifting Button
for 25703
for 26701
26700 1314 Throat Plate with Extension for 26699,
for 26701
26701 Binder (English) complete for 31-19 Ma
chine, Nos. 671D, 25744, 25745, 26699,
26700, 26702 and 26703
26703 1314 Vibrating Presser Foot for 26701 and 28784
26718 1370 Ruffler Needle Clamp Body for 26719
26718 1370 Tucker Needle Clamp Body for 26719...
26719 984 Ruffler Needle Clamp complete for 26230,
26724 and 28816, Nos. 1115p, 1943 and
26718
26719 984 Tucker Needle Clamp complete for 36561
Nos. 1115f, 1943 and 26718
26722 2035 Ruffler Driving Lever for 26724
26723 2034 " Ruffling Blade Lever for 26724...
26724 2034 Ruffler (power) complete, with right and
left guides, with separating blades and
disengaging lever to throw ruffling blade
out of action, Nos. 102d, 223d, 812b,
1101c, 1621e, 1640c, 2301, 26668 to
26671, 26675, 26676, 26678, 26719,
26722, 26723 and two 337d
26760 1383 Throat Plate with 337d and 26080, for
under braiding, for 12369 and 12467...
26795 5839 Corder Cord Guide for 120207
26796 5839 " " " Arm with 26798 and
three 6037, for 120207
26798 5839 Corder Cord Guide Bracket for 26796....
26801 1387 Presser Foot Adjustable Guide for 26802
26802 1387 " " with two adjustable guides,
Nos. 26801 and two 725d
26803 1375 Edge Guide Bed with 2362, for 26810....
NO. PLATE NAME
No3. 26805 TO 26808 fx)R 26810

26805 1375 Edge Guide Slide Cap (left)
26806 1375 " " " " (right)
26807 1375 " " " Lever
26808 1375 " " " Spring
26809 1375 Edge Guide Slide Spring Cover for 36760
26810 1375 Edge Guide (roller) complete, Nos. 94d,
233d, 26803, 26805 to 26808, 36760, two
207f and four 220d
26888 1344 Ruffling Arm (lower) for 26890
26889 1344 '* (upper) with 190d and 219f,
for 26890
26890 1344 Ruffling Arm (adjustable) for 28845, Nos.
2291, 26888, 26889 and two 207f
26934 Hemmer (narrow) for 26935
26654 and 2G934
26936 1387 Presser Foot, for etching
26937 1385 Corder Bow for 20938
26938 1385 Corder (bow) complete, for top cording,
Nos. 4604, 25789, 26648 and 26937....
26948 2601 Edge Folder on Shank, to turn edge of
yoke and insert body of shirt
•26951 Binder Folder (lower) for 26953
*26952 " " (upper) for 26953
Nos. 26953 to 26955 for 26956
26953 1379 Binder Folder with Ribbon Tension com

plete, Nos. 26951, 26952, two each 193p,
7071 and nine 26486
26955 1378 Throat Plate with Extension, for 24344..
26956 Binder (adjustable) complete for 31-19
Machine, Nos. 283t), 19376, 24344 and
26953 to 26955
Guide No. 26978 with 335d, for tailor
work
for 26977
27072 Driving Attachment Shaft Driving Pulley
(.sectional grooved) 12 in. diam., 1^ in.
bore, with two 597c, for 12478 and 20141
27130 8633 Machine Cushion (leather) for 12248
27302 1162 Bobbin Winder Frame for 27647, 27650,
27651 and 27875
XO. PLATE XaME
27303 773 Bobbin Winder Frame Spring for 27647,

27650, 27651 and 27875
27303 773 Bobbin Winder Stop Latch Spring for
16522 and 19260
27306 1162 Bobbin Winder Spool Pin for 27308
27307 1162 " " " Stand for 27308...
27308 1162 Bobbin Winder Spool Stand complete for
12478, 20141, 27544, 27554, 27588 and
27876, Nos. 418e, 1562j, 2106, 10141,
11241, 27306, 27307 and two each 2455
and wood screws 1 in. No. 10
27312 2003 Bobbin Winder Stop Latch for 27647 and
27650
27323 1105 Knife Grinder Holder Guide Bar for 60583
27538 1162 Bobl)in \\'inder Spindle 27849 with 15072,
27850 a!ul 4182S, for 27647,27650,27651
and 27875
27540 2445 Bobbin Wiiuler Base for 27647 and 27875
27541 2445 " " Pulley for 27647 and 27875
hand) complete for 2996, for stand, Nos.
27308 and 27647
27552 1162 Bobbin Winder Base for 27650 and 27G51
27553 1162 " " Pnlleyfor27G50and27651
hand) completefor 2996, for powertable,
Nos. 27308 and 27650
27564 1104 Knife Grinder Frame with 27574, for
60583
27665 1104 Knife Grinder Emery Wheel, 2 in. diam.,
for 60934
27567 1105 Knife Grinder Emery Wheel Shaft for
60934 .*
27568 1105 Knife Grinder Emery Wheel Shaft Oil Hole
Cover (rubber) for 60583
27569 1105 Knife Grinder Emery ^^•heel Shaft Pulley
for 60934
27572 1104 Knife Grinder Knife Holder Guide Bar
Bracket with 27574, for 60583
27573 1105 Knife Grinder Knife Holder Guide Bur
Bracket Sjwing for 60.583
27574 1105 Knife Grinder Knife lloliler Guide Bar
Bracket Spring IIooU for 27564 and
27572
27587 1162 Bobbin Winder Stop Latch for 27051 and
27875
NUxMERICAL LIST OF PARTS 251
NO. PLATE NAME

hand) complete for 19131, for power
table, Nos. 27308 and 27651
27623 2836 Tliread Unwinder Spool Pin for 41527 and
41531
27636 363 Driving Attachment Treadle for 27642,
ol)solcte
27636 363 Starting Treadle for 43815
(lower) for 14233 and 15130
(lower) Spring for 14233 and 15130....
27642 Driving .\ttachmcnt Treadle complete for
14234 and 15131, Nos. 2878, 9082, 27636
and four wood screws 1 in. No. 16, obso
lete
27647 2445 Bobbin Wimler for 27544, No.s.35d, 1620j,
27302, 27303, 27312, 27538, 27540,
27541, 50356i> and two wood screws 1
in. No. 7
27650 Bobbin Winder for 27554, Nos. 35i), 1620j,
27302, 27303, 27312, 27538, 27552,
27553, 5035Gd and two wood screws 1
in. No. 7
27651 1162 Bobbin Winder for 275SS, Nos, 35i), 1620j,
27302, 27303, 27538, 27552, 27553,
27587, 50356d and two wood screws I
in. No. 7
27658
5726 and 27001, No.s. 899j, 27657 and
27600
27659 1105 Knife Grinder Knife Holder Stop Collar
with 237k, for 60583
27660 6255 Knife Grinder Knife Po.sition Pin for
27658 and 120393
27660 0255 Knife Grinder Knife Position Pin (lower)
for 27681 and 27682
27661 Knife Grinder complete for 572(3, Nos.
27662, 60583, either 27t>5S, 27681 or
27682 and three wood screws 1 in. No. 10
27662 1104 Wrench for 1508 and 1516 for 27661
27681
27682, obsolete
NO. PLATE NAME

27661, Nos. 899j, 11833, 27660 and
27679
27661, Nos. 899.r, 11833, 27660 and
27739 8520 Thread Unwinder Thread Cone (wood)
for large cones, for 41529 and 41533...
27822 1105 Knife Grinder Emery Wlieel Clamping
Nut Washer for 60934
"27849 Bobbin Winder Spindle for 27538
•27850 " " " Collar for 27538
27875 " " for 27876, Nos. 35d, 1620.1,
27302, 27303, 27538, 27540, 27541,
27587, 50356d and two wood screws 1
in. No. 7
hand) complete for 19131, for stand,
Nos. 27308 and 27875
27940 2836 Thread Unwinder Spool Stand with 453c,
for 41529 and 41533
28054 5742 Starting Treadle Centre for 20039
28084 8633 Machine Cusliion (felt^ Pin for 79758....
28084 8633 " Rest Pin (.-Vttachments and
.\ccessories)
28334 1380 Binder Folder for 28678 and 28776
28336 " Ribbon Tension Plate for 28.337..
28337 1380 Binder Ril)l)on Tension complete for 28678
and 28776, Nos. 26617, 28336 and eight
26480
28342 1383 Throat Plate with 337d and 26080, for
12450 for under braiding
Nos. 28343 to 28351 pgr 28352
28343 2632 Box Plaiter Centre Guide

28344 2632 " " " " Holder with
10165
28345 2632 Box Plaiter Folder Blade (left)
28346 2632 " " " " (right) '...
28347 2632 " " Sliding Bracket (left)
28348 2032 " " " " (right)
28349 2632 " " " " Arm (left)
with 2301
28350 2632 Box Plaiter Sliding Bracket Arm (right)
with 2301
28351 2632 Box Plaiter Sliding Bracket Arm Exten
sion Bracket
HO. PLATE NAME
28352 Box Plaiter complete, Nos. 28343 to 28351,

two each 190d, 200f, 514c, 914f, 1564d,
2296, 2297, 7071, 26438, 26439, four
401e and six 233d
28353 2633 Presser Foot with 28354, 28355 and two
6650, for 28352
28354 2633 Presser Foot Guide (left) for 28353
28355 2633 " " " (right) for 28353
28358 2624 Edge Folder (suspended) left hand, to turn
edge under, for 31-27 Machine
28359 1395 Edge Folder (double) with Separating
Blade on Shank, lower folder to turn the
edge of the goods under, for 31-27
Machine
28366 2645 Binder Folder for 28794, obsolete, use
120493, 120494 or 120495
28549 1395 Edge Folder (double) with Separating
Blade on Shank, lower folder to turn
the edge of the goods up, for 31-27 Ma
chine
Nos. 28590 TO 28594 for 28816
28590 1371 Ruffler Driving Lever

28591 1371 " " " Spring
28592 1371 " " " " Collar
28593 1371 " Frame
28594 1371 Presser Foot (left)
28596 1371 " " (right) Shank for 28814....
28597 1371 " " " " Cap for 28816
28600 1371 RufBer Ruffling Blade Lever for 28816...
28601 1371 " Starting Lever with 190d, for 28816
for 28816
28605 1372 Edge Folder (upper, right hand) with left
hand lower guide and separating blade
on shank, to fold top band only, for
making yokes, for 28816
28607 1371 RufHer Kuffling Blade Holder Stop for
28816
28611 1396 Binder on Shank, for suspenderwebs
28613 1396 Strip Folder on Shank, for overall shoulder
straps
28615 1397 Edge Folder with Cord Guide on Shank,
to insert and sew on insertion in one
operation
•254 NUMERICAL LIST OF PARTS
NO. PLATE NAME

28617 1398 Strip Folder on Shank, for inserting folded
strip, for trimming mantles
28618 1398 Presser Foot (grooved) for strip, for 28617
28621 1397 Piping Attachment and Strip Folder on
Slnmk, for car-seat cushions
28623 2602 Hemmer and Corder on Shank, to take
goods from above to cord bottom
28624 2602 Presser Foot with groove on bottom to
the right of needle hole, for 28623
28625 2627 Edge Folder (double) with Strip Folder
and Cord Tube on Shank, for inserting
cord, folding strip and stitching between
the two folded edges of goods
28627 2600 Hemmer on Shank, for % in. hem, for
Marseilles quilts
for 28788
28632 2602 " " " to turn edges under
28633 1399 " " " " " top edge only,
for binding coata
28634 2602 Binder on Shank, to turn top edge only,
for raw edge binding
28635 1398 Binder on Sh^nk, for % in. binding
28636 2601 " " " to turn top edge only, for
men's trouser bottoms
top edge only, with guide for inserting
canvas strip
28638 2600 Binder on Shank, for dress shields
28639 2603 " " " to turn top edge only,
for suspenders
28640 2627 Binder on Shank, for 1^4 in. binding, for
soft blankets
28641 2603 Binder on Shank, for H in- binding
28642 2603 " (horn) on Shank
28643 2603 " on Shank with Guide (wire) for
mattress work
NO. PLATE NAME
28646 2604 Edge Folder (double) on Shank, for men's

skeleton coat seams, to turn to outside
28647 2626 Strip Folder on Shank
28648 2626 " " " " for making straps
28650 2604 Hemmer on Shank, for hemming heavy
Canton flannel
28651 2605 Hemmer on Shank, for turning tops and
bottoms of canvas leggings
28652 2605 Hemmer on Shank, for 1 ^ in. to 2 in. hem
28653 " " " " 2^ in. to 3 in. hem
and 12457
and 12457, for 28657
and 12457, for 28657
28657 Binder (English) complete, Nos. 190d,
207p, 12369 or 12457, 25721, 25722,
25983. 28655 or 28656 and two 7071...
28658 1377 Guide (roller) with 1852
28660 1392 Quilter complete, Nos. 25992 and 28659..
28661 2028 Hemmer (foot) ^ in. hem, for gusset work
28662 2028 " " H in-hem, slotted for lace
28663 2028 " Tisin.hem,forl2372,12455,
20002, 20117 and 20151
28664 Hemmer (foot) ^ in. hem, slotted for lace
28665 2606 Binder (foot)
28666 2606 " " right hand
28667 2606 " left hand
28668 2606 Presser Foot (strip folding)
28669 2606 Hemmer Spring for 28670
28670 2606 " (foot) in. hem, with 28669
and two 26459
28671 1392 Hemstiteher
28672 1391 Presser Foot, two grooves to the right of
needle hole, for cording
28673 2607 Lap Seam Feller (right hand) on Shank, to
fold top only
28674 2607 Lap Seam Guide on Shank
28675 1391 Presser Foot (pointed toe) for stitching
box plaiting on body of material
NO. PLATE NAME
28678 Binder (English) complete, Nos. 193f, 7071,

26603 or 120001, 28334, 28337, 28676,
28677 and two 233d
28679 1376 Hemmer Bed with 28681, for 28688
•28680 1376 Folder (left) for 28688
28681 1376 " " (right) for 28679
Nos. 28682 to 28686 for 28688
28682 1376 Hemmer Slide with 28687 and two each

2362 and 12152
28683 1376 Hemmer Slide Cap (left)
28684 1376 " " " (right)
28685 1376 " Folder Disengaging Lever
28686 1376 " Slide Spring
28687 1376 " Cover for 28682...
28688 1376 Hemmer complete, with lever for opening
the folder and releasing the hem so that
it can be finished without removing the
hemmer from machine, for skirts, over
alls or similar closed articles, Nos. 94d,
28679, 28680, 28682 to 28686, two 207f
and three 233d
28690 " Shank for 28691
28688, Nos. 18055, 26231, 28689 and
28690
28693 2607 Binder on Shank, for binding the arm
holes in cotton garments
28698 2608 Strip Folder on Shank with cord tube....
28699 2608 Presser Foot, grooved to the right of needle
hole, for 28698
28700 2609 Hemmer (short head) on Shank, for hem
ming stable blankets
chine, Nos. 190D, 207f, 20106, 25721,
25722, 26702, 26703, 28783 and two
7071
28788 Corder complete, for top and bottom
cording, Nos. 25792, 26167, 28629,
28630 and two 135d
for 28794 and 28861
NO. PLATE NAME
28792 2645 Throat Plate for 28790, for 28794 and

28861
28794 Binder complete, for circular binding, for
sandals, slippers, shoe tongues, etc., for
31-19 Machine, Nos. 207p, 337d, 7071,
7806,28790 to 28793,36620 and 120493,
120494 or 120495
28795 Hemmer (foot) plain bottom, ^ in. hem
28803 2619 Piping Attachment on Shank, for flannel
without cord
28804 2619 Binder on Shank, for binding dress shields
28811 2625 Edge Folder (suspended) right hand, com
plete, for turning edge and ruffling folded
edge on skirts, for 31-27 Machine
28813 1371 Presser Foot (right) Plate for 28814
28814 Presser Foot (right) complete for 28816,
Nos. 2521, 28596, 28813 and 62527....
28815 1371 Ruffler Ruffling Blade for 28816
28816 1370 Ruffler (power) complete, with lever for
throwing ruffling blade into action, for
intermittent ruffling, such as yoking
shirts, etc., Nos. 185h, 226d, 560b, 706d
1049d,1101c, 1550h,1603e,1647c, 2656
24203 to 24206, 26719, 28590 to 28594,
28597, 28600, 28601, 28607, 28814,
28818 1372 Double Edge Folder (right hand) with
separating blade, for ruffling shirt body
and putting in yoke for 28816
Nos. 28823 to 28827 for 28828

28828 Binder complete, for circular binding (bias
binding) for suspender ends and tabs
-with movable folder for finishing off, for
31-19 Machine, Nos. 207f, 7071 and
28823 to 28827
28830 1387 Presser Foot (grooved) for cording, for
carriage work.
NO. PLATE NAME

right hand upper folder and separating
blade for 31-27 Machine
28838 2650 Edge Guide (suspended) left hand, for
31-27 Machine
28845 RufBing Arm (adjustable) complete for
31-27 Machine, Nos. 226d, 1550h, 24203
to 24206, 26890 and two 665d
28848 2648 Strip Folder on Shank, for folding overall
straps
28849 1387 Presser Foot with guide on bottom to the
left of needle hole, for 28848
28851 2648 Binder on Shank, for 3 in. st rip of bobbin-
ette material, to bind ^ in. wide
28857 2645 Binder Folder for 28861
28858 2645 Presser Foot with 242d, 23219 and 28859,
for 28861
28859 2645 Presser Foot Edge Guide for 28858
28860 2645 Binder Strip Guide for 28861
28861 Binder complete, for circular binding (bias
folded strips) for ladies' lawn tie.^ etc.,
Nos. 28790, 28792, 28857, 28858, 28860
and two each 207k and 7071
28862 2649 Edge Folder (double) on Shank, right
hand upper, left hand lower, with .sepa-
•.rating blade, for wrappei-s, for 31-27
Machine
28903 2782 Edge Folder (left hand) with right hand
upper guide on Shank, to turn up the
body of bobbinette curtains and sew on
insertion in one operation
28908 2658 Presser Foot Spring Guide for 28909
28909 2658 " " (left hand spring guide) with
665d and 28908
28920 1387 Pre.sser Foot, for brakling, to .stitch braid
right hand edge
28935 2661 Hcmmer on Shank, for bobbinet te inaterial,
to turn the hem under
28938 2658 Pres.ser Foot for 28724
28941 2661 Binder (horn) on Shank, for bias binding,
to turn under both edge.s of binding...
raw edge straps of bias chiffon
28945 2666 Strip Folder on Shank, for making overall
straps
NO. PLATE NAME

28948 1386 Hemtner on Shank complete, for one fold,
with right hand lower guide for lace,
Nos. 26653, 26654 and 28947
Nos. 28949 to 28952 foe 28953
28949 Presser Foot

28951 2671 " " " " "
Clamping Lever
Clamping Lever Spring
Guide complete, for tailor work, Nos.
2653, 26092 and 28949 to 28952
28958 2668 Edge Folder and Binder (combination)
for seaming ladies' skirts and making
imitation plait
Nos. 28964 to 28966 for 28967

28965 2658 " " Knife
28966 2658 " " " CLamp
28967 2658 Presser Foot complete, for grooving in
soles, Nos. 198t), 15072 and 28964 to
28966
286d, 940d, 7071, 28971 to 28973 and
both edges under
28971 2669 Binder Shank for 120165
28971 2669 Guide for 28969 and 120428
28971 2669 Edge Folder Shank for 36292
28972 5839 Binder Arm for 120166
28972 5810 Edge Folder Holder for 36293
28972 2669 Guide Holder for 28969 and 120428
28973 5839 Binder Hinge Plate for 120166
28973 5810 Edge Folder Holder Shank for 36293
28973 2669 Guide Holder Shank for 28969
29549 1353 Tension Releasing Lever for 31-15, 31-16,
31-20, 31-24, 31-27, 31-32, 31-34 and
31-37 Machines, obsolete
29599 2014 Arm Oil Tube Packing (felt) for 11119,
NO. PLATE NAME
29633 5736 Feed Rock Shaft Crank with 157j, for

20333 and 20334
32572 5806 Tension Releasing Disc for 44118
32574 5806 Pin for 44118
33887 8633 Machine Hinge Plate for 44244
33892 Tension Screw Stud 413c with 1560c, for
Nos. 35002 TO 35006 for 35137
35002 2671 Presser Foot Extension

(long, left)
(long, right)
(short, right)
(short, right) flush
35016 Hemmer, ^ in. hem, for 26607
35018 2045 Tape Delivery Wire for 31-37 Machine
(Attachments and Accessories) for 35883
35018 5643 Tubular Trimming Attachment Tape De
livery Wire for 35883
35019 984 Ruffler Driving Lever Spring for 26018..
right hand lower guide, for lace
left hand lower guide, for lace
Nos. 35026 TO 35029 for 35030
35026 2673 Corder on Shank
35030 Corder complete, for edge cording plush,
Nos. 35026 to 35029
35062 2676 Binder (horn) on Shank, for K in. to IJ^
in. wide, for tape, for mattresses
35063 2676 " " " light work, for 35104....
35064 2661 Hemmer on Shank, for 1 in. to 2 in. hem,
for general work
35065 2677 Binder on Shank, for strip, to turn in
upper edge only, for skirt facings, etc..
35066 5644 PresserFootfor35065,35067,35208,35241,
35325, 35681, 35863,120247 and 120248
NO. PLATE NAME
35067 2678 Binder (horn) on Shank, for strip to turn

both edges in, for ladies' collars, etc....
35069 2666 Binder (foot) for strip, to turn the upper
edge in, for skirt facings, etc
35082 2680 Binder on Shank, for raw edge bias bind
ing, for wrappers, etc
35104 2684 Hemmer on Shank, for bottom of shirt
waists, for inserting drawing or shirring
string
35129 2682 Presser Foot (strip folding) for covering
cord with folded strip
Nos. 35134 TO 35136 for 35137
Clamp
Clamp Lever
35137 Presser Foot with Extension and Gradua
ted Adjustable Guides complete, Nos.
337b, 35002 to 35006, 35134 to 35136
and 36696
the goods under
35172 2682 Presser Foot (tube) for guiding and stitch
ing the right hand edge of ribbon
35177 Edge Folder (double) on Shank, for oil
2691
cloth and leather, for 31-19 Machine...
for 35177
35182 2684 Binder on Shank, for cut strip, with heavy
cord stitch in centre of strip, for ladies'
dressing sacques, etc
35184 2682 " " " darning
for 28967
35190 2697 Guide for 28967
35191 2697 Throat Plate, for imder braiding, for 35189
35208 1971 Binder on Shank, to turn in both edges for
bias or straight binding, for skirts,
wrappers, shirtwaists, etc
NO. PLATE NAME
35209 1972 Binder on Shank, to turn in both edges for

bias binding, for binding the inside of
small circles, corsets, etc., for 31-19 Ma
chine
35232 2674 Lifting Presser Foot for 35226 for 31-19
Machine
35233 2674 Vibrating Presser Foot for 35226 for 31-19
Machine
35236 1971
Hemmer on Shank, for in. hem and
above, for bottom of shirt waists
35241 2695 Hemmer on Shank, for Canton flannel, etc.
for 35243
.3.5243 2698 Presser Foot (strip folding) with tube for
inserting cord, for making loops for dress
ing gowns
35253 2693 Edge Folder (double) on Shank, for join
ing yokes to the back of shirts
for 35253
Nos. 35272 to 35274 for 35280

35272 2061 Separating Blade Arm
35273 2061 " " " Bracket
35274 2061 " " " Latch Lever w i t h
35275
35275 2061 Separating Blade Arm Latch Lever Stud
for 35274
35276 2061 Separating Blade Holder for 35280
35277 2061 " " " Spring for 35280
35279 2062 " " for 35280
35280 Separating Blade (hinged) complete for
31-27 Machine, Nos. 76d, 108d, 4604,
10135, 14026, 35272 to 35274, 35276,
35277, 35279, two each 102d, 239d and
337u
Nos. 35282 to 35286 for 35280
NO. PliATE NAME
35282 2064 Edge Guide (upper) left hand

35283 2062 " Folder (lower) right hand, on Shank
35284 2064 " " (upper) left hand
35324 2684 Strip Folder on Shank, for making four-
ply Ijands for ladies' stock collars, etc.,
for 31-19 Machine
35325 2067 Binder on Shank, to turn top edge only,
for shirt bosoms, skirt trimmings, etc...
35345 953 Strip Folder on Shank, for making straps
Nos. 35347 to 35350 for 35351
35347 970 Strip Folder (double) hinged, for turning

in the right hand edges of strips, for
making strip, for 35348
35348 970 Strip Folder, for tiu'ning in the upper and
lower edges of strip made on 35347....
35349 970 Strip Folder Holder and Guide
35351 Attachment complete, for making two
piece apron straps, cloth suspendere, etc.,
Nos. 19474, 24572, 35347 to 35350 and
two each 190d and 7071
35352 970 Binder Folder on Shank for 35354
35353 970 " " Hinge Plate for 35354
35353 932 Hemmer Folder Hinge Plate for 35681...
35354 970 Binder on Shank (hinged) complete, for
mattress work, Nos. 1425b, 2749, 35352
and 35353
35444 Presser Foot Body for 35447
35445 " " Tension Plate with 35446,
for 35447
35446 2669 Presser Foot Tension Plate Guide Pin for
35445
35447 2669 Presser Foot (tension plate) complete for
35354, Nos. 93f, 2656, 35444 and 35445
right hand lower guide, for lace
35539 2669 Hemmer (foot) in. hem, for China silk,
etc
NO. PLATE Name
35599 2669 Presser Foot, for etching, for 31-42 Ma

chine
35610 2669 Edge Folder Holder Friction Washer for
36293
35610 2669 Guide Holder Friction Washer for 28969
and 120428
35679 932 Hemmer Folder on Shank for 35681
36681 932 Hemmer on Shank (hinged) complete, for
mattress work, Nos. 1425d, 35353,
35679 and 36006
straps from 1 in. to 1^ in. wide
35700 976 Hemmer (left hand) with right hand lower
guide on shank, for 31-27 Machine
35710 1252 Hemmer (foot) ^ in. hem, with guide on
for 35712
35712 1252 Throat Plate, small needle hole, for 35711,
for 35682, 35710, 35997 and 36072
for 26466
35832 2669 Presser Foot, for heavy work, for 35104..
35855 1253 Strip Folder on Shank, for collar bands..
35863 5644 Hemmer on Shank, for canvas work
35877 Presser Foot (strip folding) for raw edge
strip, to turn the edgesunder, for making
1]^ in. to 2 in. strip
Nos. 35879 to 35882 for 35883
35879 5643 Tubular Trimming Attachment Strip Wire

35881 5643 Presser Foot (strip folding) with tube....
35883 Tubular Trimming Attachment complete,
for making H in-> A in. and ^ in. trim
mings, Nos. 35018 and 35879 to 35882
35995 5645 Presser Foot with right hand folder, for
folding and stitching facing to shoe
lining
35997 Hemmer (foot) ^ in. hem, with guide on
NO. PLATE NAME

36006 932 Hemmer Folder Hinge Screw Washer for
35681
36022 5645 Presser Foot with 665d and 36023, for
blind stitch cording, for 12 to 40 ligne
cord, for ornamental cording on skirts,
suits, etc
36023 5645 Presser Foot Cord Guide for 36022
36072 Hemmer (foot) % in. hem, with guide on
36086 Hemmer (foot) ^ in. hem, slotted for lace
36129 5812 Piping Attachment (double), adjustable)
on Shank with upper edge folder
36182 5808 " " with 665d and 36183, for
blind stitch braiding, for soutache braid
36183 5808 Presser Foot Braid Guide for 36182
Nos. 36185 TO 36187 for 36188
36185 6252 Edge Guide Arm with 1988

36187 6252 " " Bed with four 465f
36188 6252
Edge Guide (roller) complete, for glove
work, Nos. 1425d and 36185 to 36187..
36292 5810 Edge Folder (double) on Shank 28971, for
36293
36293 5810 Edge Folder (double) hinged, adjustable,
complete, Nos. 286d, 940p, 7071, 28972,
28973, 35610 and 36292
Nos. 36340 TO 36343 for 36344
36340 5807 Binder Bed with two each 1036c and 1266c
36341 5807 " Edge Guide
36342 5807 " Guide (lower)
36343 5807 " " (upper)
36344 5807 Binder (adjustable) complete, for leather
binding, canvas bags, leggings, etc.,
Nos. 286d, 671d and 36340 to 36343...
36456 6254 Binder Bed for 36463
36457 6254 " Folder with 25669, 36458 and two
7476, for 36463
36458 6254 Binder Folder Guide Block for 36457....
Nos. 36459 to 36462 for 36463
36459 6254 Binder Guide (back, lower)
NO. PLATE NAME
36460 6254 Binder Guide (back, upper)

36461 6254 " " (front, lower)
36462 6254 " " (front, upper)
36463 6254 Binder (adjustable) complete, for soft hats
Nos. 401e, 1536d, 25672, 25673, 25677,
36456, 36457, 36459 to 36462, two 233d
and three 334d
36520 Hemmer, \i in. hem, for 36521
26654 and 36520
36561 8213 Tucker complete, Nos. 26719, 36655 to
36657, 36660, 36061, 36663, 36667,
120500, 120572 and two each 36658,
50238 b and 86354
36576 5808 Presser Foot Finger Guard for 36623
36578 ' Oiler (copper plated) with 36579 (Attach
ments and Accessories) obsolete, use
120342
36579 Oiler Spout, ZYz in. long, with 120117, for
36578, obsolete
36589 Presser Foot for 28700
36620 2645 Binder Ribbon Guide for 28794
36623 5808 " 30622 with 36576 and two
50202d
36648 8213 Tucker Tuck Marker Rivet for 36663
36655 8213 " Driving Lever for 36561
36656 8213 " HingeStudfor36561
36657 8213 " Lock Spring for
36561
36658 8213 Tucker Driving Lever Lock Spring Rivet
for 36561
36660 8213 Tucker Tuck Guide for 36561
36661 8213 " " " ThumbScrewWasher
for 36561
36662 8213 Tucker Tuck Marker (lower) for 36663
36663 Tucker Tuck Marker (lower) 36662 with
36664 and two 36648, for 36561
36664 8213 Tucker Tuck Marker (upper) for 36663
36667 8213 " " Smoothing Spring for 36561
36696 2671 Pre.sser Foot Graduated Adjustable Guide
Clamp Steady Pin for 35137
36700 5808 Binder (foot) left
36711 Hemmer, Y in. hem, for 36712
NO. PLATE NAME
36712 6811 Hemmer on Shank complete, for umbrella

work, Nos. 26653, 26654 and 36711....
36760 1375 Edge Guide Slide with 26809, 51809 and
two 12152, for 26810
36776 Hemmer on Shank, 2in. to 3 in. hem..
Nos. 36818 TO 36820 for 36821
36818 5809 Finger Guard

36819 5809 " " Friction Washer
36820 5809 " " Holder with 196j
36821 5809 Finger Guard complete, Nos. 36818 to
36820 and 50316j
36906 5813 Throat Plate with under guide, for rick
rack, for 19474
Nos. 36980 TO 36983 for 12437 and 20147
36980 Hemmer (foot) ^ in. hem

36981 " " -h in* hem
36982 " " in. hem
36983 " " J4in. hem
39395 5839 " Block Pin for 120073
41400 6120 Machine Rest Pin (wood) 3)^ in. long,
(Attachments and Accessories)
41514 2836 Thread Unwinder Spool Weight, 4 in.
diam., with 41515, for 41529 and 41533
41515 5742 Thread Unwinder Spool Weight Centre
Pin for 41514
41526 2836 Thread Unwinder Spool Rest for 60701..
41527 " " " " 60701 with
27623, for 41529
41529 2836 Thread Unwinder complete, for one large
spool or one large cone of thread, Nos.
27739, 27940, 41514, 41527, 41630,
41640 and three wood screws 1 in. No.
41530 2837 Thread Unwinder Spool Rest for 60455..
41531 " " " " 60455 with
two 27623, for 41533
41533 2837 Thread Unwinder complete, for two large
spools or two large cones of thread, Nos.
27940, 41531, 41631, 41640, two each
27739, 41514 and three wood screws 1
in. No. 12, obsolete, use 225396
41569 5842 Thread Unwinder Thread Guard Eyelet
for 41630 and 41631
41630 2836 Thread Unwinder Thread Guard with
208e and 41569, for 41529
NO. PLATE NAME
41631 2837 Thread Unwinder Thread Guard with

208e and two 41569, for 41533
Nos. 41637 TO 41639 for 41640
41637 2836 Thread Unwinder Thread Guard Rod

(lower)
(upper)
Coupling with two 456c
41640 Thread Unwinder Thread Guard Rod
complete, 30 in. long, for41529and41533,
Nos. 41637 to 41639
41828 Bobbin Winder Spindle Collar Pin for
27538
41929 5844 Belt Guard for 41931
41930 5842 " " Hinge for 41931
41931 Belt Guard complete, Nos. 8420, 41929,
two 41930 and four wood screws ^ in.
No. 9
43525 8631 Binder Steady Pin for 120540
Nos. 43801 TO 43818 fob 31-42 Machine
*43801 Arm with 11104

43802 5735 " Shaft for 44112
43803 5738 Needle Bar Crank and Lifting Cam with
448c and 1362c, for 44112
43804 5740 Presser Bar Stop Collar with 1253c
43805 5742 " Foot, obsolete
43806 Stop Wheel with 2269, for 43807,obsolete
43807 5735 Stop Wheel complete, Nos. 446c, 12316,
12325, 12345, 43806 and two 840d,
obsolete, use 43943
43808 5741 Thread Retainer Spring for 43809
43809 — Thread Retainer complete, Nos. 418d,
1562j, 43808 and two 2455
43810 5760 Starting Treadle Extension for 43815
43811 6760 " " Pitman Rod (lower) for
43814
43812 5760 Starting Treadle Pitman Rod (upper) for
43814
43813 5741 Starting Treadle Pitman Rod Clamp with
354c, for 12439 and 43814
43814 Starting Treadle Pitman complete for
43816, Nos. 12283, 12317 and 43811 to
43813
NO. PLATE NAME
43815 Starting Treadle complete for 42816, Nos.

326e, 2878, 9082, 27636, 43810, 51075e,
two 6055 and four wood screws 1 in. No.
16
43816 Starting Treadle and Pitman complete,
Nos. 11742, 25089, 43814 and 43815 for
31-42 Machine when operated head on .
43818 5739 Driving Pulley Spring Washer
Nos. 43830 TO 43834 fob 31-37 Machine
43830 5784 Plaiting Cam No. 10
43831 5784 " " " 11
43886 5738 Finger Protector for 31-39 Machine
Nos. 43887 to 43890 for 31-37 Machine

43887 5745 " " " (upper) Hinge Stud
43888 5745 « " " (lower) Spring Stop
43888 5745 " " " (upper) Spring Stop
43889 5752 " Rock Shaft
31-22 Machine
43918 5767 Ruffling Separating Blade for 43920
43919 5767 " " " Shankfor43920
43920 5757 Ruffling Separating Blade on Shank com
plete for 31-27 Machine, Nos. 43918,
43919 and two 26092
for 31-34 Machine
•43927 Arm with 11104, for 31-35 Machine
Nos. 76d, 766d, 802d, 1521e, 4880, 4885,
5598, 6670, 12415, 12416, 19372, 20340,
21301 and two 178e
Nos. 76d, 766d, 802d, 1521e, 4880,4885,
5598, 5670, 12241, 12415, 12416, 16586,
20340 and two 178e
NO. PLATE NAME

766d, 802d, 1521e, 5598, 12241, 12250,
12415,12416,16586,20340 and two 178e
43931 Knee Lifter complete (Stands 25255 and
766d, 802d, 1521e, 5598, 12415, 12416,
19372, 20340, 20465, 21301 and two
178e
31-24 Machine, No.*?. 76d, 766d, 802d,
1521e, 5598, 12237, 12240,12241, 12416
20255, 20465 and two 178e
31-35 Machine, Nos. 76d, 766n, 802d,
1521e, 5598,12241,12415,12416,16586,
20340, 20465 and two 178e
43941 Stop Wheel with 2269, for 43943
43942 5738 " Block for 43943
43943 5735 StopWheel complete for 31-42 Machine,
Nos. 446c, 12316, 12345, 43941, 43942
and two 840d
43944 580G Tension Releasing Lever for 31-15, 31-16,
31-19, 31-20, 31-24, 31-27, 31-32, 31-34,
31-35, 31-37 and 31-39 Machines
43945 5806 Tension Spring for 44118
43946 5806 Thread Take-up Spring for 44118
43947 5736 " " Crank for 43991
ing Rod with 43977 and two 90Gb, for
31-15, 31-16, 31-19, 31-20, 31-22, 31-24,
31-27, 31-32, 31-34, 31-35 and 31-37
Machines
ing Rod Cap for 43976
for 31-15, 31-16 and 31-20 Machines...
the inch) for 31-15, 31-19 and 31-20 Ma
chines
43980 5837 Tension Releasing Lever for 31-22 Machine
43981 6119 Bobbin Winder Frame for 43982 and 43983
Nos. 5960, 5961, 5963, 12336, 15077
and 43981
NO. PLATE NAME

Nos. 5960, 5961, 5963,12336,15077 and
43981
43990 Thread Take-up complete for 31-15,31-16,
31-19, 31-20, 31-24, 31-27, 31-32, 31-34,
31-35, 31-37 and 31-39 Machines, Nos.
775e, 11204, 12404, 12410 and 43997..
43991 Thread Take-up complete for 31-22 Ma
chine, Nos. 775e, 11204, 12410, 43947
and 43997
43992 Feed Forked Connection complete for
31-32 Machine, Nos. 3033,12332, 44003
and two each 375c and 1518j
43993 Feed Forked Connection complete for
31-15, 31-16, 31-19, 31-20, 31-24, 31-27,
31-35 and 31-37 Machines, Nos. 818d,
3033, 3039, 20284 and two each 375c
and 1518j
43997 Needle Bar Connecting Link 12382 with
12384, for 43990 and 43991
Nos. 44004 TO 44006 fob 44007

44004 2565 Oil Cup, obsolete
44005 2565 " " Extension 44214 with 24075, for
44007 and 44223.
44006 2565 Oil Cup Packing (felt) for 44007 and 44225
44004 to 44006, obsolete, use 44225....
44008 Needle Bar Connecting Link 12196 with
12131, for 44179
44009 5840 Slack Thread Bcgulator for 31-27Machine
44112 " Shaft 43802 with 43803, for 44200..
43945, 43946, 44141 and two 2102
44121 Arm Shaft 12427 with 20283, 24036 and
62637, for 44195
24036, for 44189
24036, for 44196
44124 Arm Shaft 12427 with 12197 and 20188,
for 44197
44125 5804 Feed Lifting Rock Shaft for 44126
NO. PLATE NAME

31-15, 31-16, 31-19, 31-20, 31-22, 31-24,
31-27, 31-32, 31-34, 31-35 and 31-37
Machines, Nos.12376 and 44125
44130 Arm Shaft 20332 with 20188,20283,24036,
24207 and 24208, for 44207
44134 Oscillating Shaft Crank for 44135
1518J, 19449, 44134 and two 453o
for tailor work, for 31-15, 31-20 and
31-22 Machines
44139 772 Machine Hinge Plate for 44140 and 44180
44140 Machine Hinge complete, Nos. 12361,
44139 and merlized wood screw 1}4 in.
No. 14 (Attachments and Accessories)
44141 Tension Screw Stud 50327c with 1560c,
for 44118
31-20 Machine
44147 Tension complete for 31-19 and 31-42 Ma
chines, Nos. 2923, 7336, 8511, 20037,
33892 and two 2921, obsolete
44149 Tension complete, for 31-39 Machine, Nos.
2923, 7336, 8511, 33892 and two 2102,'
oljsolete
teeth to the inch) for 31-20 Machine..
44160 " " Shank for 44161
44161 5842 PresserFoot (hinged) complete, Nos. 26276,
44159 and 44160
*44169 Arm Shaft 20400 with 20188,20283, 20426
and 24030, for 44199
♦44172 Arm Shaft 12427 with 20188, for 44192...
♦44176 Driving Attachment Starting Crank Shaft
12477 with 12479, 20371 and two 2022,
for 12478 and 20141
teeth to the inch) for 31-20 Machine..
NO. PLATE NAME
44179 Thread Take-up Lever complete for 31-42

Machine, Nos. 775e, 11204,12130,12164
and 44008
44180 Machine Hinge complete, Nos. 6055,12361,
44139 and 51075e (Attachments and
Accessories)
•44181 Face Plate Thread Guard (lower) for 12150
44188 Feed Forked Connection 43924 with 818d,
3033,3039 and two each 375c and 1518J,
for 31-34 Machine
•44189 Arm Shaft 44122 with 20197, for 31-15,
31-16, 31-20, 31-22 and 31-24 Machines
•44192 Arm Shaft 44172 with 20197, for 31-39
Machine
Machine
Machine
Machine
Machine
Machine
Machine
power table
44214 Oil Cup Extension for 44005
•44217 Arm Shaft 12427 with 12428, 20188 and
20197, for 31-34 Machine
44222 Oil Cup for 44223
44223 " " 44222 with 44005, for 44225
44224 « It Thread Retainer for 44225
8628
44006, 44223 and 44224
44226 8629 Feed Bar for ,31-34 Machine
44228 8629 Stop Pawl for 44230
44229 8628 " " Wearing Block for 44230
44230 Stop Pawl complete for 12344, Nos. 376e,
44228 and 44229
44243 8633 Machine Hinge Connection for 44244
44244 Machine Hinge complete for 79758, Nos.
2809, 33887, 44243 and merlized wood
screw 1J4 in. No. 14
NO. PLATE NAME

the inch) for 31-15, 31-19, 31-20 and
31-22 Machines, 28G54,28657 and 36293
the inch) for 31-15, 31-19, 31-20 and
31-22 Machines, 26760, 28654, 28657
and 35245
44254 5813 Feed Dog (reversible) for cloth, 12 teeth
(12 teeth to the inch) for 31-32 Machine
to 44254
to 44254
Nos. 46506 TO 46509 Fon 46520 and 46656

46506 3826 Pitman Ball Bearing Adju.sting Screw
King
46507 3826 Pitnian Ball Bearing Adjusting Screw
46509 3826 " " Case
46519 3825 Band Wheel Crank for 46520 and 46656..
*46520 Band Wheel Crank and Pitman (ball
bearing) complete for 25265, Nos. 1520r,
25371, 46506 to 46509, 46519, 46523,
46630, 46655 and six 25362
*46522 3825 Leg for 25265, 25279 and 25284, obsolete
46523 3825 Pitman Rod with 25360, for 46520
46524 3825 Treadle for 25265 and 25284
46528 6142 Brace Section (left) with 46629, for 46662
*46604 Band Wheel Shaft Driving Flange (left)
complete for 25255, Nos. 25422 to 25425,
25429 and 25434
*46605 Band Wheel Shaft Driving Flange (right)
complete for 25255, Nos. 25425 to 25429
and 25434
46629 Band Wheel Crank Screw Centre 297c
with 1507R, for 46528 and 82985
46629 Treadle Screw Centre 297c with 1507r, for
46663 and 82985
46630 Pitman Rod Ball Screw Bearing 25361
with 1670r, for 46520
46630 Pitman Rod (lower) Ball Screw Bearing
25361 with 1670r, for 46656
46655 3826 Pitman Ball Separator for 46520 and 46656
NO. PLATB NAME

ing) complete for 25284, Nos. 1520r,
25371, 46506 to 46509, 46519, 46630,
46655, 46658 to 46660 and six 25362...
46657 Belt, size M in., length 36% in., with 25127,
from motor to machine for 25284
Nos. 46658 to 46660 for 46656
46658 5843 Pitman Rod (lower) with 25360

46659 5841 " " (upper)
46660 5843 " " Coupling
46661 Starting Treadle Screw Centre 296c with
1507r, for 20040
46662 6142 Brace (sectional) complete for 25265,
25279 and 25284, Nos. 46528, 46663 and
three 880R
46663 6142 Brace Section (right) with two 46629, for
46662
46667 Brace for 82985
46681 8497 Driving Attachment Treadle Bracket
(right) for 60502
50035E 5745 Plaiting Blade Holder (lower) Spring
Stop Screw for 31-37 Machine
50035E 5745 Plaiting Blade Holder (upper) Spring Stop
50169D 5839 Hemmer Guide Screw for 120078
50202D 5808 Presser Foot Finger Guard Screw for
36623
50216b 8628 Shuttle Race Slide Spritig Screw for 20450
50238b 8213 Tucker Tuck Guide Thumb Screw for
36561
50238b 8213 Tucker Tuck Marker Clamping Plate
Thumb Screw for 36561
50302.r 5809 Finger Guard Holder Set Screw for 120497
50316J 5809 " " Hinge Screw for 36821
50327c 5806 Tension Screw Stud for 44141
50356D 5806 Bobbin Winder Frame Hinge Screw for
27647, 27650, 27651 and 27875
50441D 5839 Hemmer Block Hinge Screw for 120078..
50551.1 8628 Belt Guard Set Screw for 126365
51022J 8630 Binder Screw for 120493
51075E 5843 Machine Hinge Bolt with 51581e, for
44180
61097J 8631 Binder Thumb Screw for 120533
51097J 8631 Tajjc Reel Ann Thumb Screw for 120533
51581E 5843 Machine Hinge Bolt Nut for 51075e
NO. PLATE NAME
51809 1375 Edge Guide Slide Roller and Stud for

36760
52045 8628 Arm Oil Tube Packing (braided cotton)
for 11119, 12454 and 24131
52454 5842 Thread Retainer for 31-15, 31-16, 31-19,
31-20, 31-22, 31-24, 31-27, 31-32, 31-34,
31-35, 31-37 and 31-39 Machines
56813 Feed Bar Screw Centre 313c, with 1519J-,
for 31-15, 31-16, 31-19, 31-20, 31-22,
31-24, 31-27, 31-32, 31-34, 31-35 and
31-37 Machines
56814 Feed Lifting Rock Shaft Screw Centre
307c with 1513J, for 31-15, 31-16, 31-19,
31-20, 31-22, 31-24, 31-27, 31-32, 31-34,
56814 Feed Rock Shaft Screw Centre 307c with
1513J, for 31-15, 31-16, 31-19, 31-20,
31-22, 31-24, 31-27, 31-32, 31-34, 31-35
and 31-37 Machines
56848 Bell Crank 5596 with 5599 and 5601, for
5598
60455 Thread Unwinder Spool Rest 41530 with
1149c and two 155c, for 41531
60502 Driving Attachment Treadle Bracket
(right) 46681 with two wood screws 1
in. No. 14, for 126209
*60583 Knife Grinder for 27661, Nos. 261j, 27323,
27564, 27572, 27573, 27659, 60934, two
27568 and four each 310k and 1516j. ..
60701 Thread Unwinder Spool Rest 41526 with
155c and 1149c, for 41527
60934 Knife Grinder Emery Wheel Shaft 27567
with 1508.1, 27565, 27569 ami 27822, for
60583
62502 Shuttle Race Bodj' 24413 with 24418 and
two 1053d, for 24419
62527 5806 Presser Foot Hinge Pin for 20157, 20311,
20346, 24489, 24546, 24983 ami 28814
two 1053d, for 24010, obsolete
Arm Eccentric Connection 19362 with
19365, for 44121
62682 8628 Face Plate Thread Eyelet for 31-35 Ma
chine
62739 Shuttle Bobbin Case for 62740
NO. PLATE NAME

and 19292, Nos. 591f, 592e, 2523, 2975,
7553, 15141, 15278 and 62739
67086 5844 Treadle Pitman Rod (upper) for 67177..
67175 5843 Hook for 67072
67176 5844 Treadle Pitman Rod (lower) for 67177...
67177 5844 Treadle Pitman complete for S. D. 11 and
S. D. 12 Electric Motors, for 25284,
Nos. 9079, 67086 and 67176
79758 Bench Stand with 12248, two each 44244,
wood screws ^ in. No. 10, three wood
screws IH in. No. 10 R. H. O. and A.
and four each 12405 and 28084
82973 5216 Leg for 25265, 25279 and 25284
82985 5216 Brace 46667 with three 46629, for 25265,
25279 and 25284
86354 8213 Tucker Tuck Smoothing Spring Rivet for
36561
120001 5838 Feed Dog, (spiked teeth) 12 teeth (10 teeth
to the inch) for 28678, 28731, 35226,
35354 and 120207
Nos. 120073 TO 120077 for 120078
120073 Hemmer Block with 39395

120074 " " Spring
120075 " Guide
120076 Hemmer Plate
120077 " Shank
120078 5839 Hemmer (foot) adjustable, complete, for
tennis shoes, Nos. 219d, 651d, 50169o,
50441D and 120073 to 120077
120117 Oiler Spout Washer (leather) for 36579,
obsolete
120120 5838 Binder Folder with 665d and 120121, for
120127
120121 5838 Binder Folder Guide for 120120
120122 5838 " Ribbon Tension Plate for 120123
Nos. 120123 TO 120126 for 120127
120123 5838 Binder Ribbon Tension complete, Nos.

26614, 120122 and six 26615
chine, Nos. 220d, 7806, 120120, 120123
to 120126 and two each 190d and 7071
NO. PLATE NAME
120135 5846 Edge Folder (double) for turning in two

edges and inserting loops in one opera
tion
120143 " " Plate for 120144
35067, 35208, 35241, 35325, 120247 and
120248, Nos. 7298, 19335 and 120143..
120165 5839 Binder on 28971, for 120166
120166 5839 Binder (adjustable) complete, for sleeve
facings on military coats, Nos. 286d,
940d, 7071, 28972, 28973 and 120165..
120191 5845 Strip Folder on Shank, to turn in both
120197 5848 Edge Folder (upper) with lower right hand

guide on shank, for military uniforms..
120206 5839 Corder Cord Guide Bed with 457c, for
120207
120207 5839 Corder (adjustable) complete, for short
turns on cushions, Nos. 190d, 1044d,
26795, 26796 and 120206
120242 7790 Binder Bed with 1036c, for 120247 and
120248
120243 7791 Binder Folder (lower) for 120248
120244 7790 " " (upper) for 120247 and
120248
120245 7790 Binder Guide (centre) for 120247 and
120248
120246 7790 Binder Guide (lower) for 120247
120247 7790 Binder (adjustable) complete, to turn in
upper edge only, for light or medium
weight material, Nos. 286d, 120242 and
120244 to 120246
120248 7791 Binder (adjustable) complete, to turn in
both edges, for light or medium weight
material, Nos. 286Dand 120242 to 120245
120257 5847 Binder with tension slots on shank, for
turning in both edges ofbiascut binding,
for light or medium weight material...
120287 2613 Hemmer for 28720
120288 2613 " Shank for 28720
120289 2694 " on Shank, 2 in. hem, to turn the
goods under
NO. PLATE NAME

120327 8210 Hemmer on Shank, for }4 in. to ^ in. hem
for bottom of shirt waists
120338 8625 Hemmer for 120340
120339 8625 " Shank for 120340
120340 8625 Hemmer on Shank complete, for in. to 2
in. hem, Nos. 120338, 120339 and two
1443J
120342 2045 Oiler (copper plated) with 120343 (Attach
120343 2045 Oiler Spout, Z]4 in. long, for 120342
120367 8630 Hemmer on Shank, for handkerchief work
120427 8211 Guide Holder Shank for 120428
286d, 940d, 7071, 28971, 28972, 35610
and 120427
120433 8211 Binder Folder for 120437, 120459 and
120467
for 120437, 120459 and 120467
120436 8211 Throat Plate for 120434 for 120437,
120459 and 120467
120437 Binder (English) complete, for awnings,
Nos. 190d, 207p, 25722,120433 to 120436
and two 7071
120452 2672 Hemmer on Shank, for ^ in. to H in.
gauges, for Windsor ties
120459 Binder (English) complete, for slip covers
and general work, Nos. 190d, 207p,
25722, 120433, 120434, 120436, 120458
and two 7071
120467 Binder (English) complete, for circular
binding on imitation leather, for 31-19
Machine,Nos.207F,7071,120433,120434,
120436, 120465 and 120466
120479 8212 Quilter Guide (left) for 120485
120480 8212 " " (right) for 120485
120481 8212 " " Bracket for 120482
120482 " " " 120481withl20483
and two 209c, for 120485
120483 8212 Quilter Guide Disengaging Sleeve for
120482
120484 8212 Quilter Guide Disengaging Sleeve Spring
for 120485
NO. PLATE NAME
120485 Quilter complete, Nos. 602d, 120479,

120480, 120482 and 120484
Nos. 120493 TO 120495 for 28794
120493 8630 Folder with two 51022j, for % in. to in.

gauges
120494 8630 Folder with two 1368j, for ^ in. to in.
gauges
120495 8630 Folder with two 1368j, for ^ in. to 1 in.
gauges
120496 5809 Finger Guard for 120498
120497 5809 " " Holder with 50302j, for
120498
120498 5809 Finger Guard complete, Nos. 236J, 120496
and 120497
120500 8213 Tucker Frame for 36561
120532 8631 Binder (transverse) on Shank for 120533
120533 Binder (transverse) on Shank with Tape
Reel complete, for woolen coats, Nos.
3146, 26603, 120532, 120534 to 120536,
120540 and two 51097j
120535 8632 Tape Reel Arm with 11656 and 120537,
for 120533
120536 8632 Tape Reel Disc with 120538 and 120539,
for 120533
120537 8632 Tape Reel Disc Pin for 120535
120538 8632 " " " Stud (wood) for 120536
120539 " " " « Sleeve for 120536
120540 8631 Throat Plate with 43525, for 26603, for
120533
120572 8213 Tucker Tuck Marker Clamping Plate for
36561
126036 8497 Driving Attachment Treadle for 126209
for 126206
complete for 126209,Nos. 23258,126205,
126207, 126208 and two wood screws 1
in. No. 14
Hook for 126206
Hook Rivet for 126206
126209 Driving Attachment Treadle complete for
126213, Nos. 60502, 126036 and 126206
NO. PLATE NAME

14233 and 126209
126356 5763 Belt Guard for 126365
126363 8629 " " Bracket for 126365
126364 8629 " " Extension for 126365
126365 Belt Guard (adjustable) complete for 79758
Nos. 162d, 1480d, 9331, 50551J, 126356,
126363, 126364 and two wood screws 1
in. No. 10
126392 8632 Knife Grinder Knife Holder for 126393..
126393 Knife Grinder Knife Holder complete, for
27661, Nos. 227j, 899j, 27660, 126392
and 126394
126394 8633 Knife Grinder Knife Stop for 126393
200056e 3471 Bobbin Winder Stop Latch Screw for
225382
200082d 3471 Bobbin Winder Tension Bracket Screw for
225382
200105c Bobbin Winder Pulley SetScrew for 202473
200299h 3471 Bobbin Winder Stop Latch Trip Lever
Hinge Screw for 225382
200383c 8633 Thread Unwinder Spool Rest Rod Set
Screw for 202490
201018c 8633 Thread Unwinder Spool Rest Set Screw
for 225389 and 225395
201499b 3471 Bobbin Winder Tension Stud for 225461.
201572b 3471 " " " "Thumb
Nut for 225462
201696J 8633 Thread Unwinder Thread Guide Lock Nut
for 225394 and 225396
202277 3471 Bobbin Winder Frame Oil Packing (wick)
for 225453
202407 3471 Bobbin Winder Tension Spring for 225462
202473 3470 " " Pulley with 200105c, for
225382...
202478 3471 Bobbin Winder Step Latch Trip Lever for
225382
202490 8523 Thread Unwinder Spool Stand with
200383c, for 225394 and 225396
225381 Bobbin Winder Spindle for 225382
NO. PLATE NAME
225382 3469 Bobbin Winder (swinging automatic, right

hand) complete for 2996, 19131 and
24051, for power table, Nos. 200056e,
200082D, 200299H, 202473, 202478,
225381, 225433, 225444, 225453 to
225456, 225458 to 225460, 225462,
228026 and two wood screws ^ in. No.
13 R. H. B
225388 8523 Thread Unwinder Spool Rest Rod for
225394 and 225396
225389 8523 Thread Unwinder SpoolRest with 201018c,
for 225394
225390 8520 Thread Unwinder Thread Cone Holder, for
inverted cones
225391 8523 Thread Unwinder Thread Guide for 225394
and 225396
225392 8523 Thread Unwinder Thread Guide Rod with
208e and 225393, for 225394 and 225396
225393 8633 Thread Unwinder Thread Guide Rod
Washer for 225392
225394 8523 Thread Unwinder complete, for one large
spool or one large cone of thread, Nos.
201696J, 202490, 225388. 225389,
225391, 225392 and three wood screws
% in. No. 12
225395 7233 Thread Unwinder SpoolRest with 201018c,
for 225396
225396 7233 Thread Unwinder complete, for two large
spools or two large cones of thread, Nos.
201696J,202490,225388,225392,225395,
two 225391 and three wood screws
in. No. 12
225433 3469 Bobbin Winder and Tension Bracket Base
for 225382
225438 3471 Bobbin Winder Frame Oil Well Cap for
225453
225444 3471 Bobbin Winder Stop Latch for 225382...
Nos. 225453 to 225456 job 225382
225453 3470 Bobbin Winder Frame with 202277 and

225438
225454 3471 Bobbin Winder Frame Hinge Pin
225455 3471 " " « Spring
226456 3471 " " " « Plunger...
Nos. 225458 to 225460 for 225382

NO. PLATE NAME
225458 3471 Bobbin Winder Stop Latch Thumb Lever

225459 3471 " " " " " "
Hinge Stud
225460 3471 Bobbin Winder Stop Latch Thumb Lever
Joint Stud
225461 3471 Bobbin Winder Tension Bracket with
201499b, for 225462
225462 Bobbin Winder Tension Bracket complete
for 225382, Nos. 201572b, 202407,
225461 and two 2102
228026 Bobbin Winder Tension Bracket Screw
Washer for 225382

in SINGER Machines
are marked with the

PLATE 363-ONE.FOURTH SIZE
PLATE 766-ONE-rOTrRTH SIZE
PLATE 767-ONE.HALF SIZE
570 9
12428
PLATE 768—ONE-HALE SIZE
PLATE 770-PULL SIZE
11204
PLATE 771--FTJLL SIZE
ffl4
PLATE 772-FXJLL SIZE
I
t
PLATE 773-FULL SIZE
PLATE 774-FULL SIZE
10236
PLATE 776-PULL SIZE
PLATE 777-FXrLL SIZE
PLATE 778-FULL SIZE
12442 20002
: -to
O :
PLATE 779—PULL SIZE
PLATE 780-rULL SIZE
I2IA2 12143 12144 12259
m
12260 12435 20038 20458
PLATE 781-FTJLL SIZE
PLATE 782-FTILL SIZE
PLATE 818-ONE-FOirRTH SIZE
PLATE 819-ONE-FOTJRTH SIZE
PLATE 932-nJLL SIZE
PLATE 953—ONE-HALF SIZE
PLATE 970-0NE-HALF SIZE
35348
35349
PLATE 976-FULL SIZE
PLATE 984-PTILL SIZE
24204
PLATE llOl-rULL SIZE
Z74S7 27B3I 27B 27485 SOBS
2V483
27600 2018
PLATE 1104-ONE-SALF SIZE
PLATE 1105-FULL SIZE
27323 275B7 S7BSa
27822 275G9
261 310 899 837 27574
275BS 1508
PLATE 1162-ONE-HALF SIZE
16555 14010 I92!9
158
19226 19397 2lf 19220
2762 13211 26073 8019
4518
35BS0
.'A ,. •••
3571 I 3 5 712
©S
352
3523 35183 35210
I9d75
yirp^
19474
o
2QQ 0
20009
20019
2G0I8
20 06
20120
iiirrrnri
20147 2014^
OE 44177
19412
20143
20142
PLATE 1261—FULL SIZE
20 24
20 7
19497
20 60
20159
20152
20151
19415
44144-
19418
44156
20158
19410
20162
20 39
20138
11
20 90
; ;.; • 1
o
20350
20349
O O'l! :'iii
24344
19103 5730 5732
24443
ill
PLATE 1308-PULL SIZE
20150 20118 12474 12258
12462 20020 12335 12261
19225 19336 20134 20270
9358
9363
19357
19356
19364
19370
19366 19372 19362
9368
9369
19367
19376 9374
26699 26702 26703
« V W V W
PLATE 1317-rTJLL SIZE
24154 24122 24123 24124 24125 621
If
2523
24136
24135
2301 106
463 24 43
24 53 24141
24140
24 32 24133
14026
24 42
24130
Z423I 24240 24315 24316 2646
2653
24393 2654 2658 24401 24400
4594
ini&!
g 05
B5B7
24371
19391
24 09
2439
24 26
PLATE 1323-FirLL SIZE
24219 24199
24208
6533 64
242
24209 24200
24201
24210
Ii02
24303 24306
24305
. ••
_
6 :.ja
24304 24409 24204 24203
--26B89
24411
24205 226 207

CJ0
2291
iOiS 20aBI 2DDG2 2D0G3
9449
3447 19448 24102 24103
5 40
3 4G
2 30
203 4
47B4
11833
27GBD
9188
BSaSISa«a„.
PLATE 1361~FULL SIZE
24405
I 244 5
24412
970 284 732 1065
868 35 386 711 191
248 193 391 330
904 1517 1547 1548 440 443 316
mi R,
1163 1165 iraS Bil B3 940
1455 555 SIS 335
PLATE 1370-rULL SIZE
28816
26719 26718 1843 1115
28817
28532 286Q1 1847 2B53I
S03
28590 g 28607
24205
M. 226
1043
2B50G
185
138
24204
24206
d
'3532
seai3
28594
28BI5 24203
I 2521
28606
28605
PlKlliljHlllilMnid
28818
51809 233 2362 190 220 12152
f r I
26805 26808 26806
36760 26810 26809
'26807
26803'
28680 IQ, HQ
i
3556S
6037 1044
hJ
>
H
bd
CO
I
hd
cl
lr<
26-7-96 CO
M
N
td
26954 26955
24344
937B
24480 24481 19338
00
CM
CD
OD
to

CO
CM
CO
m
m
m
CO
0)
28676 26677
20208
26603 120001
44137
44136
28655
15368
12457
o
9i 1
12370
rnivtw
2QIQ6
12450 337 28342
26080
12457
28B3Q
86935
35QSS
PLATE 1387-FTTLL SIZE
26607 26608 26610 28936
I! j1 i
I
k>
26281
26802
26801
28849 28830 28920
PLATE 1388-PTJLL SIZE
28717 26726 20725 20727
28744 28747
26977 28626
28672 28675 28691
28701 28713 28715
28671
%
PLATE 1395—PTTLL SIZE

2861
28614
28615
ii
2mm fM IS66
2B'Q77^
25S:GS
PLATE 1971-ONE-HALP SIZE
35208
tTPH
PLATE 2000-ONE-FOXTRTH SIZE
4370
20238 2025720008 20210
20248
23B7 202 2
19267
12496 20197
24 04 2497 202 5
I2I97
12 23 I243G
12169
2 68
5169
2336
2484
4933 2020
273 2
15022
19229 16570 19441 4882 12139 20023
4879 4883
12432
12193
/ •••I:'.' '''•
20005
20004
12492
12493 12494
24120
24009
9403
24117
24024 2026
24020 24020
213 24075 362 20037
6556
25143 19258
439 7
5990 20185
20 86
24. 03
24 02
651
19447 19449 19448
11 I I:
nii.niii'i'i'f
20655 20596
20651 20654 20649
9 3 20600 19406
2059
20594
20222 20221
20220
20219 15140 24051
2480
24074
24050
418 2455 1014) 1562 2106
li
2413! 2117 24019 12149 15072
12495 7298 29599 8679 26231
24579 24580 24581 26629 26189 25995
25998 25994 26002 28001 20064
20244 20252 9804 7483 1099
20246
20240
20243 131 20242
men)
1942 34
20251
20250 20249 21031
20284
20254 20247
24036
20300
12425 26249
i.Ci ill:
wmm%
207 7071 25721
26616 266(5 26614
25722
26401
19474
26400
26617 26486
f1
26618
25734
PLATE 2025—FTTLL SIZE
26 66 26 68
26167
25984
IS43G
LENGTH 7H INCHES
25792
lr»
>
to
o
to
a
hfj
a
879 tr"
oa
190
26 6 26428
25920 6267
2874
25985 26638
S6664
S6B66
SBSSe
SE65S
26670
mm
26669 26677
26668
02 337
I! 01 ^6676
26678
2667 28679
12143 26123
2fo370
26)06 2.91 334- 26371
irt
589
196 4604
ly
26092 I?
1 U
25855 9558 7476 9780 25670 25671 656
o
}:0
10
228 220 176 152 447 g
914 658 691 401 756 233 337

•I 'm rs——nt.
1\
S ^ as j9
26439 514 2297 1564 2296 466
B Q% Co ^
261 74 26173 2273 96 23 0 18055 26276
26150
26147
26344 26149
1928 26138 910 233 337
16573
240 238
2668!
26026 20364 26485 22003
35018
19221 8909 20461 8908
25866
25873
I 25874
24325
24323
24009
20347
2032
PLATE 2049—ONE-FOURTH SIZE
20320 20332 20291
20340 2313
&
35273 7B •5272
35274 108
10135 239
14026 4BD4 35277
217
r

cn
cn
OJ
m
PLATE 2067—FTTLL SIZE

27302
27647
27541
27308 27312
27540
27307
27610
2846
27306 27656
27587
44007 284
44004 A
1r
44005
44006
24075 456 2062
19444
,9442 190
II 9445
987
28628 28627
11'
'3-
CN
CO
(X>
CO
'9-
CM
CO
(jO

285^11
28666 28667
28665 28668
287
Ifii
L
28704
287 6
'ir
28708
287 9
\
H
>
4
28723
tr*
QQ
N
»
1
hi
kH
Od
28740
a
t*
CQ
I—I
N
28751
28752
M'f
luimiaâaaagi^
S88Q3
PLATE 2e25-FULL SIZE
2881!
Ll'lllJ'llllili
PLATE 2627—ONE-HALP SIZE
28705
28351 2835.0
28354 28353 28355
10165 665
PLATE 2634-OlflE-POUETH SIZE
26571 26570
i
26684
26713
26578
i3
26569
iiiiliiiiiiiiiili iiifii?
( 1
:||l ml if iiiiiiiii! f
26568
- O
26710
35159
26790 26792
28793
28791 7071 20V
?HOh
26^8 28859 36fo20 3d7
28857
232 9 242
28B24 28826
28825
28823
28848
28850
28851
hi
H3
H
to
Od
fO
hi
cj
ir
tr*
xn
N
teJ
PLATE 2660-PtrLL SIZE
28830
28900 28909 28908 28975
0^
28938 28953
28967 198 28965 35040
5072
28910
3894
35064
28944
28944
7LATE 2666-FULL SIZE
28969
28972
35346 35447 3583S
3544B 35509 35539 358SB
35610
PLATE 2671-rrLL SIZE
35001 28951 2653 28952 26092
35005
35002 35006
35003 35004
35134 35135 35136 36696 337
PLATE 2e74-FULL SIZE
35027 35029
19475
19474
35063
PLATE 2677-rTTLL SIZE
I
35100 35066
PLATE 2684r—ONE-HALF SIZE
35104
CeillKIHKK
U.ir.LilDlrrU'L'ii.ruriJ
Ly'JiJi.UU._ „
III 111111 i 11 j 11
Hi
I i I M
niiliniinui
35S4
9475
PLATE 2697-PIILL SIZE
3SI9I
35 90
35243 35244
PLATE 2699-FULX SIZE
PLATE 2836-OXE-rOXrBTH SIZE
PLATE 2837-ONE-FOUETH SIZE
41514
27833'-' II 41530
S7940'
PLATE 3469-ONE-FOURTH SIZE
225382
202473 225453
2102 202ii07 201572
dk
225461
202104 I- *'225459
201499
225460
200056 200300
225455 225454 225458 225444
fi
PLATE 3813-ONE-NINTH SIZE
PLATE 3814-ONE.NINTH SIZE
<T>
CO
4- •4
Lf)
lO
Ci Oi
oi
M • *» .
Q—^
E ••^
o CO
02
CO <o
rh
Ln
UD
r\2
02 c\2
PLATE 3815-ONE-HALr SIZE
TX
46509 46506
46508
46507
46655
25371 25361
972 25127
r\
296 748
u 297 1507
i
36DB9 35395 36QS3 36QSS 665
PLATE 5735-ONE.FOTJRTH SIZE
20400 43802 20O58 16559 19355
20494
43807
16128
20091
2770 20464 2770 20462
2765-
2767-
20060
4017
PLATE 5737-FTrLL SIZE
20758 20757
20756 20755 2523 2975 592
I9I3I 20649 2973 2974 591
20654
1494 12314 3012
43818
2 96
155 2345
800 352
12130 12167
43817 25IQ4 12317
43813
11742
43923
!!' 1
db:
Silfj
12422
20404
204 0
S0dl3
ZQAIA
El
S04S3 50435
20440 20441 20442
20443
20444
20446
20448
20450
iiilii:
. .
PLATE 6757-ONE-HALE SIZE
,ia33i 439S0,
433 0
\
43919
24145
423
PLATE 5760-ONE-rOUIlTH SIZE
i
2002
PLATE 5762-ONE-FOTTRTH SIZE
SQ467
PLATE 5763-ONE-FOTJRTH SIZE
Cu
tSi
I
PLATE 6784-ONE-HALr SIZE
50327 32574 2102 32572

S * !'
o
43945 43946 62527
44135
43944
52378 52398 210993 210958 671
s « o
457
1266
50356 966 1141 435 1036

&
1620 26459
r?
o
36623 36622 36576

50202
V
vT)
36700 36182 36183
a
CO
nO
CO

36521
36129
36I3I
3690b
4-42 5£
12348 12311 244S9
44156
43980
1054 59,68 24414
57S 21202
7806
]20]£3
120122
120208
120001
0
46659 1656S 19265 24431 27638
0875
e>tS 24903 41930
; ^ - >.
52454
1658b 46658 67175 46660
3012 7958
o
217 207
5158
51075 3S0 800 155 25855
7476 5944 26644 2301 4621 23219

[1
J a I J a
6055
939
26645
120191
120135 20136
120257 120144
12171 5963 5961
12169
5960
4398
2)68
27552
11241
PLATE 6142-ONE-EIGHTH SIZE
46662
36ias
'425 36166 1988 4655
? o ^ ^
PLATE 6254 -FULL SIZE
27681 11833 27660
22539b
22532b
225391 225391
-225324
225388--
225395
---202490
SO.l 26605
28360
120001
12024-7 1036
>
H
W
-I
CO
0
1
120245
120244 Cl
U3
M
w
120242
120246
120248
120243
tr*
>
H
W
-a
CO
I
a
t-'
c«
»-«(
N
w
120242
2043fc 120434
120433
120428
120427
28971 28972
20435 120458 35610 7071
© o
286 940
(T
O
Cî
o
CO 00
CVi
Th
C\J
O
oj
oO
o
CV4
CO
0%
O
!j
:•
o
CV
m
r\2 1'
!'• to
CO
o
eo
N.
-o
(P

fO
lO
•.9
n9
PLATE 8497-ONE.FOURTH SIZE
126036
A A A A A A
jefco.'ie hObZh
26205 60658 4-668
27639
27070
9079
PLATE 8520-0NE.HALF SIZE
1^0440 26151 ^64-85 120344
20345
8908
225390
fc8547
PLATE 8623-ONE.SIXTH SIZE
225394
r-ri
225di9<
-225392
--225388
"^225389
.-•202490
PLA.TE 8627-FULL SIZE
44156 44162
120325
354 52454
50429
4416
^4418 44229
52045 62682 933
p) 50551
44224 44225
376 62 1460 602
•if
Y r
8975 904 50216 624 209
M f
44•2^8 A-AZZ(o
ZIoZOb
126205
126363
126207
\Zh3h4-
35350 2bb66 12046b
120493 120494 120495
20367
368 51022 20465

t
l^0540
IE0534-
120532
51097 1656 43526
12248
120535
•^^..-120537
12053b
,-120538
126392
12405 33Q57
2609 |2fo20& 28084- 44243
20I(j9^> 225393 201018 200363 27130
® V
2fc394
>>•••
ii--
1
ysi'-'
ag|?&
f- 1 -"--• -- .- Ma;
m:-:-
v-r„/
i"; -•-
. T.
•:-r5
:';X:.
. ---r:-
~ -'?:--?V-V'.-'"'- '-••
.-"i :--V-
:-i • . - -A •
:}.i^-:>- M:
--\.-Vii-=;.:' ^•-- -
••^ 2^^--^••-,T:ai-
From the library of: Superior Sewing Machine & Supply'**••-*

LLC
fi-
M' Ll.-'
•?. y<f.
~-'q.--'-'

Singer": Machines

Uploaded by

Copyright:

Available Formats

Singer": Machines

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Singer": Machines

Uploaded by

Copyright:

Available Formats

What are sewing machines parts typically made of?

What are sewing machines parts typically made of?

What information is included in the index section?

What information is included in the index section?

Form 8733 Revised

THE SINGER MANUFACTURING COMPANY

To ensure easy running and prevent unnecessary v/ear

Attachments AND Accessobies Ill

SINGER Needles should be used

Needles in Containers marked

"FOR SINGER MACHINES"

In ordering from ihls list, use ONLY ihe part NUMBER In

The number stamped on a Sewing Machine Part is in every

Z.J-Nickel and Chromium Plated.

Arm with 11104

10 PARTS FOR MACHINE No. 31-15

NO. PLATE NAME

144d 782 Arm Shaft Screw

NO. PLATE NAME

20349 1267 Feed Dog, 13 teeth (16 teeth to the inch)

NO. PLATE NAME

20275 1259 Feed Dog, 13 teeth (18 teeth to the inch)

NO. PLATE NAME

12381 767 Needle Bar {hollow)

NO. PLATE NAME

44135 5806 Oscillating Shaft Crank complete, Nos.

12139 2004 Presser Bar Spring (medium) .055 wire...

12335 1308 Presser Foot (narrow) for 12369, 12457

NO. PLATE NAME

NO. PLATE NAME

62740 771 Shuttle Bobbin Case complete, Nos. 591f,

NO. PLATE NAME

12404 770 Thread Take-up Crank.

NO. PIiATB NAME

12483 778 Throat Plate, small needle hole, for 12481

SINGER Needles should be used

Needles in Containers marked

LIST OF PARTS COMPLETE

MACHINE No. 31-16

NO. PLATE NAME

3022j Clamp Stop Motion complete, Nos. 248a,

43978 778 Feed Dog, 24 teeth (22 teeth to the inch)

NO. PLATE NAME

*43993 Feed Forked Connection complete, Nos.

NO. PLATE NABiE

453c 783 Needle Bar Connecting Stud Set Screw...

NO. PLATE NAME

Note: No. 24983 is sent with this machine unless

NO. PLATE NAME

62740 771 Shuttle Bobbin Case complete, Nos. 591f,

NO. PLATE NAME

LIST OF PARTS COMPLETE

MACHINE No. 31-19

NO. PLATE NAME

♦20339 Arm with 11104

NO. PLATE NAME

NO. PLATE NAME

NO. PLATE NAME

2049 773 Lifting Presser Bar Bell Crank Driving