Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    Sensor Control: Battery Raspberry Pi 3 B+ or Arduino

    Uploaded by

    Shailesh Lute
    The document outlines the requirements and proposed block diagram for a sensor control system, including: 1. The system requires an Arduino UNO, Raspberry Pi 3b+, 4 ultrasonic sensors, emergency and toggle switches, a motor driver, weight sensor, and other components. 2. The Raspberry Pi will control the system and interface with ultrasonic sensors to measure distances, emergency switches, and a weight sensor. 3. A motor driver module will control DC motors based on input from the Raspberry Pi and sensors, allowing for PWM speed control.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Sensor Control: Battery Raspberry Pi 3 B+ or Arduino

    Uploaded by

    Shailesh Lute
    19 views5 pages
    The document outlines the requirements and proposed block diagram for a sensor control system, including: 1. The system requires an Arduino UNO, Raspberry Pi 3b+, 4 ultrasonic sensors, emergency and toggle switches, a motor driver, weight sensor, and other components. 2. The Raspberry Pi will control the system and interface with ultrasonic sensors to measure distances, emergency switches, and a weight sensor. 3. A motor driver module will control DC motors based on input from the Raspberry Pi and sensors, allowing for PWM speed control.

    Original Title

    SENSOR CONTROL final

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document outlines the requirements and proposed block diagram for a sensor control system, including: 1. The system requires an Arduino UNO, Raspberry Pi 3b+, 4 ultrasonic sensors, emergency and toggle switches, a motor driver, weight sensor, and other components. 2. The Raspberry Pi will control the system and interface with ultrasonic sensors to measure distances, emergency switches, and a weight sensor. 3. A motor driver module will control DC motors based on input from the Raspberry Pi and sensors, allowing for PWM speed control.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    19 views5 pages

    Sensor Control: Battery Raspberry Pi 3 B+ or Arduino

    Uploaded by

    Shailesh Lute
    The document outlines the requirements and proposed block diagram for a sensor control system, including: 1. The system requires an Arduino UNO, Raspberry Pi 3b+, 4 ultrasonic sensors, emergency and toggle switches, a motor driver, weight sensor, and other components. 2. The Raspberry Pi will control the system and interface with ultrasonic sensors to measure distances, emergency switches, and a weight sensor. 3. A motor driver module will control DC motors based on input from the Raspberry Pi and sensors, allowing for PWM speed control.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    SENSOR CONTROL

    Requirements

    1. Arduino UNO : 2
    2. Raspberry Pi 3b+ : 1
    3. Ultrasonic sensor HC-SR04 : 4
    4. Jumper wires (male & female)
    5. Breadboard :2
    6. Emergency switch :2
    7. Toggle switch DPDT :2
    8. Voltage regulator (D36V28F5)
    9. Motor driver module(REES52)
    10.PCB
    11.Weight sensor (Load cell 200kg with HX711 amplifier)
    12.Resistors & capacitors(As per requirement)
    Proposed Block Diagram Of Sensor Control System

    Raspberry Pi
    Battery
    3b+ or
    Arduino
    Module
    Ultraso- Emer-
    nic gency
    Sensor Switch
    DC Motor
    D PWM Speed
    Weight
    P Control System
    Sensor
    D
    T

    Battery
    Raspberry Pi :

    we are using Raspberry Pi 3b+ which has a 64bit ARMv7 Quad Core Processor
    having 1 GB RAM along with onboard Wi-Fi and Bluetooth.

    Ultrasonic Sensor HC-SR04 :

    • Operating voltage: +5V


    • Measuring Distance: 2cm to 450cm
    • Measuring Distance: 2cm to 80cm
    • Accuracy: 3mm
    • Measuring angle covered: <15°
    • Operating Current: <15mA Operating Frequency: 40Hz

    • Motor driver module (REES52):

    • Input voltage: dc 6-60v.


    • Output voltage: load linear
    • Input current: require large than the motor operating current. Output
    current: determine load size Continuous current: 20a within. Maximum
    power: 1200w.
    • Quiescent current: 0. 01ma Speed type: modulated current.
    • Speed mode: on off linear potentiometer 270 degrees Operating
    frequency: 15khz.
    • Speed percentage: support.
    Voltage regulator (D36V28F5):

    You might also like