Multi-Purpose Repair Concrete Repair Mortar Feather Edge Pro
Multi-Purpose Repair Concrete Repair Mortar Feather Edge Pro
SELECTION GUIDE
MULTI-PURPOSE REPAIR CONCRETE REPAIR MORTAR FEATHER EDGE PRO
• Adheres to concrete, stone, masonry, and stucco • For concrete repair and new construction where • Does not require priming on most surfaces
• Vertical and horizontal use high early strength, excellent durability, and low • Self-drying material can accept tile and stone
• Fast-Setting, initial set in 15 minutes shrinkage is required applications as well as moisture-sensitive floor
• High early strength, reaches structural strength in • Vertical, horizontal, and overhead use coverings in as little as 30 minutes
1 hour • Use when high early strength and fast setting is • Compatible with sealed gypsum based flooring
USES & • Trowelable from feather-edge to 4 in. required USES & • Can be used under: Ceramic tile, resilient flooring,
• Excellent non-shrink properties • Fast-Setting, initial set in 15 minutes VCT, carpet, natural stone, and wood flooring
ADVANTAGES • Meets ASTM C1107, C928, C387, and CRD 621 • Trowelable from ½” to 6” ADVANTAGES • Can be used over (when properly prepared):
• Polymer-modified for increased adhesion and concrete, cement backer board, exterior
flexural strength grade/exposure 1 plywood, ceramic tile, cutback
• Meets ASTM C928 and C387 adhesive, residual carpet adhesive, fully adhered
resilient flooring, and cement terrazzo.
• 1 lb. will yield 1 sq. ft. at ⅛” • 1 lb. will yield 1 sq. ft. at ⅛” • 1 lb. will yield 1.5 sq. ft. at ⅛”
COVERAGE COVERAGE
APPLICATION
1 Hour Compressive Strength ≥ 3,000 psi ≥ 2,000 psi 1 Day Compressive Strength >2,100 psi
3 Hour Compressive Strength ≥ 5,000 psi ≥ 4,000 psi 7 Day Compressive Strength >3,000 psi
24 Hour Compressive Strength ≥ 6,000 psi ≥ 5,000 psi 28 Day Compressive Strength >4,500 psi
Final Set Time ≤ 35 minutes ≤ 35 minutes Final Set Time Approximately 30 minutes
Moisture-Sensitive
Freeze/Thaw & Salt Resistance Yes Yes 30 minutes
Floor Covering
For Technical Product Data, Industry Standards, and Material Safety Data Sheets on all of the Rapid Patch products, please visit our website at www.tccmaterials.com
®