VA1912 W

Service Manual
ViewSonic VA1912W/Wb
Model No. VS10866
19” Color TFT LCD Display
(VA1912W/Wb_SM Rev. 1a Oct. 2005)
ViewSonic 381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583
I. Copyright
Copyright © 2005 by ViewSonic Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of ViewSonic Corporation.
Disclaimer
ViewSonic makes no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims any warranty of merchantability or fitness for any particular purpose.
Further, ViewSonic reserves the right to revise this publication and to make changes from time to time in the
contents hereof without obligation of ViewSonic to notify any person of such revision or changes.
Trademarks
Optiquest is a registered trademark of ViewSonic Corporation.
ViewSonic is a registered trademark of ViewSonic Corporation.
All other trademarks used within this document are the property of their respective owners.
Revision History
Revision SM Editing Date ECR Number Description of Changes Editor
1a 10/25/05 Initial Release G. Han
ViewSonic Corporation Confidential - Do Not Copy VA1912W/Wb

i
TABLE OF CONTENTS
1. Precautions and Safety Notices 1
2. Specification 5
3. Front Panel Function Control Description 9
4. Circuit Description 15
5. Adjustment Procedure 17
6. Troubleshooting Flow Chart 40
7. Recommended Spare Parts List 48
8. Exploded Diagram and Exploded Parts List 53
9. Block Diagram 55
10. Schematic Diagrams 56
11. PCB Layout Diagrams 66

ii
1. Precautions and Safety Notices
1. Appropriate Operation
(1) Turn off the product before cleaning.
(2) Use only a dry soft cloth when cleaning the LCD panel surface.
(3) Use a soft cloth soaked with mild detergent to clean the display housing.
(4) Use only a high quality, safety approved AC/DC power cord.
(5) Disconnect the power plug from the AC outlet if the product will not be used for a long period of time.
(6) If smoke, abnormal noise, or strange odor is present, immediately switch the LCD display off.
(7) Do not touch the LCD panel surface with sharp or hard objects.
(8) Do not place heavy objects on the LCD display, video cable, or power cord.
(9) Do not use abrasive cleaners, waxes or solvents for your cleaning.
(10) Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas containing excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- In direct sunlight.
2. Caution
No modification of any circuit should be attempted. Service work should only be performed after you are thoroughly
familiar with all of the following safety checks and servicing guidelines.
3. Safety Check
Care should be taken while servicing this LCD display. Because of the high voltage used in the inverter circuit, the voltage
is exposed in such areas as the associated transformer circuits.
4. LCD Module Handling Precautions
4.1 Handling Precautions
(1) Since front polarizer is easily damaged, pay attention not to scratch it.
(2) Be sure to turn off power supply when connecting or disconnecting input connector.
(3) Wipe off water drops immediately. Long contact with water may cause discoloration or spots.
(4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
(5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
(6) Since CMOS LSI is used in this module, take care of static electricity and ensure human earth when handling.
(7) Do not open or modify the Module Assembly.
(8) Do not press the reflector sheet at the back of the module in any direction.
(9) In the event that a Module must be put back into the packing container slot after it was taken out of the
container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the
CFL Reflector edge softly. Otherwise the TFT Module may be damaged.
(10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate or tilt the Interface
Connector of the TFT Module.

1
(11) After installation of the TFT Module into an enclosure (LCD monitor housing, for example), do not twist or
bend the TFT Module even momentarily. When designing the enclosure, it should be taken into consideration
that no bending/twisting forces may be applied to the TFT Module from outside. Otherwise the TFT Module
may be damaged.
(12) The cold cathode fluorescent lamp in the LCD contains a small amount of mercury. Please follow local
ordinances or regulations for disposal.
(13) The LCD module contains a small amount of materials having no flammability grade. The LCD module
should be supplied with power that complies with the requirements of Limited Power Source
(IEC60950 or UL1950), or an exemption should be applied for.
(14) The LCD module is designed so that the CCFL in it is supplied by a Limited Current Circuit (IEC60950
or UL1950). Do not connect the CCFL to a Hazardous Voltage Circuit

2
Correct methods : Incorrect Methods :
Only touch the metal-frame of the panel or the front Surface of the panel is pressed by fingers & this may
cover of the monitor. cause “ MURA “
Do not touch the surface of the polarizer .
Take out the monitor with cushion Take out the monitor by grasping the LCD panel.
That may cause “ MURA“.
Place the monitor on a clean & soft foam pad . Place the monitor on foreign objects .
That could scratch the surface of panel

3
2. Specification
2.1 INTRODUCTION
FEATURES VA1912w / VA1912wb
Size 19” wide
Luminance (Typ, cd/㎡) 280 cd/㎡
Contrast Ratio (Typ) 500:1
TFTLCD PANEL Colors ( 6 bit + 2 bit FRC) 16.2 M colors
Response Time (Typ) 8 ms
Viewing Angle (H/V) 150 ° / 130 °
Recommend resolution 1440 x 900@60Hz
Analog (75ohms, 0.7/1.0 Vp-p) Yes
Input Signal
Digital Yes
Separate Sync Yes
Sync Compatibility Composite Sync No
Sync on Green No
PC Yes
Compatibility Power Mac Yes
TV Box (NextVision 6) Yes
Power Voltage AC 100-240V, 50/60Hz Yes
On Mode(Max / Typ) 36W(max) / 32W(typ)
Power Consumption
Active Off Mode (Max) <1W
Audio Amplifier/Speaker 1.5W/2.5W x2
Tilt ( 20 ° to -5 °) Yes
Swivel No
Ergonomics
Pivot No
Height Adjust No
OSD Control [; X] [ 1 ] [▼] [▲] [ 2 ] [ ] Yes
451 x 391 x 197 (mm)

Physical (W x H x D mm)
17.8 x 15.4 x 7.8 (in)
Dimension
538 x 470 x 158 (mm)
Package (W x H x D mm)
21.2 x 18.5 x 6.2 (in)
Physical (Net kg/lb) 4.5kg (9.9lb)
Weight
Package (Gross Kg/lb) 5.7kg (12.5lb)
Temperature (℉/℃) 41℉-95℉/+5℃-+35℃
Operating Condition
Humidity (%) 20 % - 80 %
Temperature (℉/℃) -4℉-131℉/-20℃-55℃
Storage Condition
Humidity (%) 20 % - 85 %
CB / TCO99 / UL/cUL / FCC-B / ICES 003 / Argentina-TUV/S / NOM / EPA Energy
Regulation Star / TUV/Ergo / ISO13406-2 / TUV/GS / CE / GOST-R / SASO / BSMI / PSB /
C-Tick / Korea (MIC) / CCC
2.2 GENERAL specification
Test Resolution & Frequency 1440 x 900 @ 60Hz

Test Image Size Full Size
Factory Default:
Contrast and Brightness Controls
Contrast = 70%, Brightness = 100%

4
2.3 VIDEO INTERFACE
Analog Input Connector DB-15 (Analog), refer the appendix A

Digital Input Connector N/A
Default Input Connector Defaults to the first detected input
Video Cable Strain Relief Equal to twice the weight of the monitor for five minutes
Video Cable Connector DB-15 Pin out Compliant DDC 2B
1. Video RGB (Analog)
Video Signals 2. DVI (Digital)
Separate
Video Impedance 75 Ohms (Analog)
Maximum PC Video Signal 950 mV with no damage to monitor
Maximum Mac Video Signal 1250 mV with no damage to monitor
Sync Signals TTL
DDC 2B Compliant with Revision 1.3
Sync Compatibility Separate Sync
Shall be compatible with all PC type computers,
Video Compatibility
Macintosh computers, and after market video cards
640 x 350*, 640 x 480, 720 x 400* (640 x 400*), 800 x
600, 832 x 624, 1024 x 768, 1152 x 864, 1280 x 768,
1280 x 960, 1280 x 1024, 1440 x 900
Resolution Compatibility
* The image vertical size might not be full screen.
But the image vertical position should be at the center.
Exclusions Not compatible with interlaced video
2.4 POWER SUPPLY
Power Supply (power build-in) CMO Part Number: 27-D003247

Input Voltage Range 100 TO 240 VAC
Input Frequency Range 50 TO 60 HERTZ
Short Circuit Protection Output can be shorted without damage
Over Current Protection FUSE 3.15 A typical at 250 VAC
Leakage Current 75 mA (Max) at 240VAC / 50Hz
EFFICIENCY 80 % typical at 100VAC @ 60 Hert
Fuse Internal and not user replaceable
Power Dissipation <1 Watts
Max Input AC Current 1.6 Arms @ nominal range
INRUSH CURRENT (COLD START) 80 A @ 240VAC , 50Hz
Shall start and function properly when under full load,
Power Supply Cold Start with all combinations of input voltage, input frequency,
and operating temperature
Shall be able to withstand an EN61000-4-4 ±2KV
Power Supply Transient Immunity
transient test with no damage
Shall be able to withstand ±2KV (L-L) and ±2.3KV
Power Supply Line Surge Immunity
(L-PE) with no damage
Shall be able to function properly, without reset or visible
Power Supply Missing Cycle Immunity screen artifacts, when ½ cycle of AC power is randomly
missing at nominal input
The power supply shall not produce audible noise that
would be detectable by the user. Audible shall defined
Power Supply Acoustics to be in compliance with ISO 7779 (DIN EN27779:1991)
Noise measurements of machines acoustics. Power
Switch noise shall not be considered

5
Separate 3-prong NEMA 5-15P type plug. Length = 1.8m.
US Type Power Cable Connects to display.
Color = Black
Schuko CEE7-7 type plug.
European Type Power Cable Length = 1.8m, Connects to display.
Color = Black
Separate 3-prong type plug.
CCC Type Power Cable Length = 1.8m. Connects to display.
Color = Black
Separate 2-prong NEMA 1-15P type plug. Length = 1.8m.
PSE Type Power Cable Connects to display.
Color = Black
Power Saving Operation(Method) VESA DPMS Signaling
ON Mode < 36 W (max) / 32 W (typ)
Power Consumption
ACTIVE OFF < 1 W
Recovery Time ON MODE = N/A, ACTIVE OFF < 5 SEC
2.5 ELECTRICAL REQUIREMENT
Horizontal / Vertical Frequency

Horizontal Frequency 30 – 82 KHZ
Vertical Refresh Rate 50 – 85* HZ.
Maximum Pixel Clock 135 MHz (EDID file is 140MHz)
Sync Polarity Independent of sync polarity.
Timing Table
Item Timing Analog Digital
1 640 x 350 @ 70Hz, 31.5kHz Yes Yes
2 640 x 400 @ 60Hz, 31.5kHz Yes* Yes
3 640 x 400 @ 70Hz, 31.5kHz Yes Yes
4 640 x 480 @ 60Hz, 31.5kHz Yes Yes
5 640 x 480 @ 67Hz, 35.0kHz Yes Yes
6 640 x 480 @ 72Hz, 37.9kHz Yes Yes
7 640 x 480 @ 75Hz, 37.5kHz Yes Yes
8 640 x 480 @ 85Hz, 43.27kHz Yes Yes
9 720 x 400 @ 70Hz, 31.5kHz Yes Yes
10 800 x 600 @ 56Hz, 35.1kHz Yes Yes
11 800 x 600 @ 60Hz, 37.9kHz Yes Yes
12 800 x 600 @ 75Hz, 46.9kHz Yes Yes
13 800 x 600 @ 72Hz, 48.1kHz Yes Yes
14 800 x 600 @ 85Hz, 53.7kHz Yes Yes
15 832 x 624 @ 75Hz, 49.7kHz Yes Yes
16 1024 x 768 @ 60Hz, 48.4kHz Yes Yes
17 1024 x 768 @ 70Hz, 56.5kHz Yes Yes
18 1024 x 768 @ 72Hz, 58.1kHz Yes Yes
19 1024 x 768 @ 75Hz, 60.0kHz Yes Yes
20 1024 x 768 @ 85Hz, 68.67kHz Yes Yes
21 1152 x 864@ 75Hz, 67.5kHz Yes Yes
22 1280 x 1024 @ 60Hz, 63.4kHz Yes Yes
23 1280 x 1024 @ 75Hz, 79.97kHz Yes No
24 1280x 768 @ 60Hz, 47.78kHz Yes Yes
25 1280 x 960 @60Hz, 60kHz Yes Yes
26 1440 x 900 @ 60Hz, 55.96kHz Yes Yes
*: The vertical image size might not be full screen.

6
2.6 FRONT PANEL CONTROLS AND INDICATORS
Front Panel Hardware Controls

Power Switch (Front Head) Power Control, soft Power Switch.
Power LED (Front Head) Green – ON
Orange – Active Off
Dark = Soft Power Switch OFF
Front Panel Controls (Head) [ ] Power
[;X] [ 1 ] [▼] [▲] [ 2 ] [ ] [ 1 ] Button 1
[ 2 ] Button 2
[▲] Up arrow button
[▼] Down arrow button
[; X] AUDIO MUTE ON/OFF
Note: Power Button, Button 1 and Button 2 and Mute

Button must be one-shot logic operation. (i.e. there should
be no cycling)
Reaction Time OSD must fully appear within 0.5s after pushing Button 1
Short Cuts Function from the button(s)

[1] Main Menu
[2] Input toggle (Analog or Digital)
To immediately activate Contrast menu. It should be change to Brightness
[▼] or [▲]
OSD by push button [2]
[▼] + [▲] Recall both of Contrast and Brightness to default
Toggle 720x400 and 640x400 mode when input 720x400 or 640x400
[1] + [2]
mode
[1] + [▼] + [▲] White Balance. (Not shown on user’s guide)
[1] + [▼] Power Lock
[1] + [▲] OSD Lock
[;X] Audio Mute on /off
Remark : All the short cuts function are only available while OSD off
Function descriptions
OSD Lock short cuts function for the buttons
The OSD lock will be activated by pressing the front panel control buttons "(1), & (▲)" for 10 seconds. If the user
then tries to access the OSD by pressing any of the buttons "1", "▼", "▲", "2" a message will appear on the screen
for 3 seconds showing "OSD Locked". The OSD lock will be deactivated by pressing the front panel control
buttons "(1), & (▲)" again for 10 seconds.
Note1: When the OSD is locked will lock all functions, including “Volume” and “Mute”
Note 2: Status bar indicating OSD Lock or Unlock is in progress and when complete it will indicate “OSD
Locked”
Note 3: OSD Lock should not lock Power Button and Power Lock function
Power Lock short cuts function for the buttons
The power button lock will be activated by pressing the front panel control buttons "(1), & (▼)" for 10 seconds.
Locking the power button means that the user won't be able to turn off the LCD while the power button is locked.
If the user presses the power button while it is locked, a message will appear on the screen for 3 seconds showing
"Power Button Locked". It also means that with the power button locked, the LCD would automatically turn back
"On" when power is restored after a power failure. If the power button is not in the locked mode, then power
should return to it's previous state when power is restored after a power failure. The power button lock will be
deactivated by pressing the front panel control buttons "(1), & (▼)" again for 10 seconds.
Note 1: Status bar indicating Power Button lock or unlock is in progress and when complete it will indicate
“Power Button Locked”
Note 2: Power should only be lockable in the “On State”

7
Memory Recall Actions
Memory Recall action on the analog and digital mode as below
1. Set the factory defaults as shown in Section 4-8
2. Clean all the mode setting buffer
3. Execute Auto Image Adjust
Note: Memory Recall should have no effect for Language, Power Lock, User Color Settings or Input Priority
Resolution Notice Actions
1. Resolution Notice OSD should show on screen after changing to non-native mode for 30 sec
2. The OSD should disappear after 10 sec or by pushing button [1] or [2]
Resolution Notice function should be disabled when push button [2] under Resolution Notice OSD
0-Touch™ Function Actions
1. Execute Auto Image Adjust when new mode detected, and save the settings to buffer for further use
2. It should be reset by Memory Recall function
(Should not reset by power off, power unplug and others)
OSD Auto Save
The OSD shall save new settings when it is turned off by the user or when it times out. There shall not be a
separate save
2.7 AUDIO INTERFACE (SPEAKER SPECIFICATION)
Line input connection 3.5 mm stereo jack

Line input signal 1Vrms
Line input impedance 20kohms
Maximum power output (Electric) 1.5W/CH
Signal to Noise Ratio 72db
Frequency response 300 to 20kHz
Distortion 8%@1kHz
There should be no audible vibration with volume at
Vibration 100%. (Input signal within 1 Vrms)
There should be no affect on the screen image
Screen image
stability under any conditions
Connector PC99 requirement Audio in Lime Green pantone # 577C
Cable type / length 3.5mm stereo cable / 1.8m length
Note: There is no guarantee <1 W power
Audio DPMS consumption in Active Off mode, when the Audio
Cable is connected

8
3. Front Panel Function Control Description
Adjusting the Screen Image

Use the buttons on the front control panel to display and adjust the OSD controls which display
on the screen. The OSD controls are explained at the top of the next page and are defined in
“Main Menu Controls” on page 10.
Main Menu
with OSD controls
Front Control Panel

shown below in detail
Displays the Main Menu or Scrolls through menu options and

exits the control screen and adjusts the displayed control.
saves adjustments. Also a shortcut to display the Contrast
adjustment control screen.
Displays the control screen

for the highlighted control.
Also toggles between two
controls on some screens.
Also a shortcut to toggle
analog and digital connection.
Audio Mute Power light

button turns Green = ON
the sound off Orange = Power Saving
Standby Power
On/Off

9
The command line at the bottom of the
control screen tells what to do next from
this screen. You can toggle between control
screens, adjust the selected option, or exit
the screen.
. (The black border around the edge of the screen should

barely touch the illuminated “active area” of the LCD display.)

10
Main Menu Controls
Adjust the menu items shown below by using the up S and down T buttons.
Control Explanation
Auto Image Adjust sizes and centers the screen image automatically.
Contrast adjusts the difference between the image background (black level)
and the foreground (white level).
Brightness adjusts background black level of the screen image.
Input Select toggles between inputs if you have more than one computer
connected to the VA1912w/VA1912wb.
Audio Adjust
Volume increases the volume, decreases the volume, and mutes the audio.
Mute temporarily silences audio output.
Color Adjust provides several color adjustment modes, including preset color
temperatures and a User Color mode which allows independent adjustment of
red (R), green (G), and blue (B). The factory setting for this product is 6500K
(6500 Kelvin).
9300K-Adds blue to the screen image for cooler white (used in most office
settings with fluorescent lighting).
6500K-Adds red to the screen image for warmer white and richer red.
5400K-Adds green to the screen image for a darker color.

11
Control Explanation
5000K-Adds blue and green to the screen image for a darker color.
User Color Individual adjustments for red (R), green (G), and blue (B).
1. To select color (R, G or B) press button [2].
2. To adjust selected color, pressSandT.
Important: If you select RECALL from the Main Menu when the product is
set to a Preset Timing Mode, colors return to the 6500K factory preset.
Information displays the timing mode (video signal input) coming from the
graphics card in the computer, the LCD model number, the serial number, and
the ViewSonic® website URL. See your graphics card’s user guide for
instructions on changing the resolution and refresh rate (vertical frequency).
NOTE: VESA 1440 x 900 @ 60Hz (recommended) means that the resolution is
1440 x 900 and the refresh rate is 60 Hertz.
Manual Image Adjust Sub-menu
H. Size (Horizontal Size) adjusts the width of the screen image.
H./V. Position (Horizontal/Vertical Position) moves the screen image left or

right and up or down.

12
Control Explanation
Fine Tune sharpens the focus by aligning text and/or graphics with pixel
boundaries.
NOTE: Try Auto Image Adjust first.
Sharpness adjusts the clarity and focus of the screen image.
Setup Menu displays the menu shown below:
Language Select allows the user to choose the language used in the menus and
control screens.
Resolution Notice allows the user to enable or disable this notice.
If you enable the Resolution Notice shown above and your computer is set at a
resolution other than 1440 x 900, the following screen appears.
OSD Position allows the user to move the OSD menus and control screens.
OSD Timeout sets the length of time the OSD screen is displayed. For example,
with a “30 second” setting, if a control is not pushed within 30 seconds, the
display screen disappears.

13
Control Explanation
OSD Background allows the user to turn the OSD background On or Off.
Memory Recall returns the adjustments back to factory settings if the display is
operating in a factory Preset Timing Mode listed in the Specifications of this
manual.

14
4. Circuit Description
1. LCD Integrated Power System (LIPS)

The LCD Integrated Power System (LIPS) is a power module combined adaptor and CCFL inverter. It accepts
100~240Vac and supply 12Vdc and 5Vdc to main board and TFT-LCD panel. About CCFL dimming and on/off
function is controlled by micro-controller.
2. Scaler
The TSU56AK is total solution graphics processing IC for LCD monitors with panel resolutions up to SXGA. It is
configured with a high-speed integrated triple-ADC/PLL, an integrated DVI receiver, a high quality display processing
engine, and an integrated output display interface that can support LVDS panel interface format. To further reduce system
costs, the TSU56AK also integrates intelligent power management control capability for green-mode requirements and
spread-spectrum support for EMI management. The TSU56AK incorporates the world’s first coherent oversampled RGB
graphics ADC in a monitor controller system. The oversampling ADC samples the input RGB signals at a frequency that is
much higher than the signal source pixel rate. This can preserve details in the video signal that ordinarily would be lost due to
input signal jitter or bandwidth limitations in non-oversampled systems. The TSU56AK also incorporates a new Dynamic
Frame Rate (DFR) generator for the digital output video to the display panel that preserves the advantages of a fixed output
clock rate, while eliminating the output end of frame short-line.
Block Diagram

15
3. Timing Controller
The CM2706B is a timing controller LSI for Office Application. It receives LVDS RGB data and synchronizes signal from
external video graphic adapter and then outputs RSDS (Reduced Swing Differential Signal) data and TTL control signals to
TFT LCD drivers.
Block Diagram
Data Output RSDS Output data

convert latch transmitter
LVDS
input data LVDS Smart
receiver Source driver
polarity Source signals
control
Gate driver
Signal
Gate signals
sync
control
Setting pins

16
5. Adjusting Procedure
A. Function Test and Alignment Procedure
1. All Modes Reset

You should do “All Model Reset” (Refer to Chap 3. Hot Keys for Function Controls) first. This action will
allow you to erase all end-user’s settings and restore the factory defaults.
2. Auto Image Adjust

The Auto Adjust is aimed to offer a best screen quality by built-in ASIC. For optimum screen quality, the user
has to adjust each function manually.
A.Turn the computer and LCD monitor on.
B. Press the ‘Auto’ button on monitor keypad to Auto Adjust.
C. The LCD monitor will start the Auto Adjust process automatically and run for 10 consecutive seconds, during
which time you will notice the image change.
3. Firmware
Test Patten: Burn in Model (Refer to Chap3. Hot Keys for Function Control)
-Make sure the F/W is the latest version.
4. DCC
Test Patten: EDID program
-Make sure it can pass test program.
5 Window Shut Down

Test Signal: 1280*1024@60Hz
Test Pattern:
Checkered Pattern Every One Pixel (50%Green & 50%Blue)

Inspection Item: Flicker, Mura
6 Window BG
Test Pattern:
Window standard pattern

Inspection Item: Line Defect, Function Defect & Mura
7 25 Gray
Test Pattern:
Full Screen 25% White (Gray)

Inspection Item: Particle, Line Defect & Mura

17
8 50 Gray
Test Pattern:
Full Screen 50% White (Gray)

Inspection Item: Bright Dot, Particle, Line Defect & Mura
9 White Box
Test Pattern:

Inspection Item: Particle, Line Defect, Power, Image Remain & Mura
10 Black Box
Test Pattern:

Inspection Item: Bright Dot, Line Defect & Power
11 RED
Test Pattern:
Full Screen Red

Inspection Item: Bright Dot, Partial & Line Defect
12 Green
Test Pattern:
Full Screen Green

13 Blue
Test Pattern:
Full Screen Green


18
14 Gray_Scale_0-100_V256
Test Pattern:
Vertical 64 (256) Gray Scale (Right → Left，From 0 to 100% White)
Inspection Item: Line Defect & Function Defect
15 Gray_Scale_0-100_H256
Test Pattern:
Horizontal 64(256) Gray Scale (Up → Down，From 0 to 100% White)

Inspection Item: Line Defect & Function Defect
16 Block Window
Test Pattern:
Black block at the center
Inspection Item: Cross Talk & Optical Character
17 Black_Tile
Test Pattern:
Black tile under white background
Inspection Item: Function Defect & Image Remain

19
15. Function Test Display pattern
Item Pattern Description Remark

Vertical 64 (256) Gray Scale (右→左，From 0 to
1 Gray_Scale_0-100_V Figure 1
100% White)
Horizontal 64 (256) Gray Scale (上→下，From 0
2 Gray_Scale_0-100_H Figure 2
to 100% White)
3 Black Full Screen Black Figure 3
4 Red Full Screen 50% Red Figure 4
5 Green Full Screen 50% Green Figure 5
6 Blue Full Screen 50% Blue Figure6
7 White Full Screen White Figure7
8 Black_Tile Black Tile Under White Background Figure 8
Figure 1 Figure 2
Figure 3 Figure 4

20
Figure 5
Figure 5 Figure 6
Figure 7 Figure 8

21
B. BIOS update procedure
BIOS Update User Guide
FOR VIEWSONIC
BIOS Update Flow for Genesis
1.1 Program：
1. 1. 1. Software
a. Please download the file “ M-Star” from CMO E-Sir system. There are ISP & BIOS two files, kindly see as
below.
a) ISPACK.EXE: Main program
b) Ancillary .ISPACK.EXE ：Description program
1.1. 2.Hardwar
•D_Sub cable（15Pin） Point plug
•Point plug [24Pin]
D_Sub cable
OR
Without to affect
1.1.3 Join VGA Cable, PC BASE, see the example picture as below.

22
1.2 Installation：
A. Please install the programs respectively as below.
B. ISP & BIOS software file to be about to produce the next. (If the file existence already, needn’t to set up.
Isp.lnk
C. repeat.) This system is applied to Win 95/98/NT/2000.
1.3 ISP Execution
1. Settings: Double Click
Isp.exe
Fig.1: ISP Tool Main Menu

23
2. When ISP Tool executing at the first time, it is required to enter Security
Data Please press , then input related information as Fig.2.
94 94 ac ca 53
For A190A2
Fig.1: ISP Tool Main Menu
Key in “OK”
“After
3.Select correct Micro Controller as Fig.3.
Step 2
Load MCU File
Step 1
Select MTV512M64

24
4. Installation software, Select want download correct file
Step 3 Example :
The path of software
location
Step 4
Press RUN

25
1.4.Verification BIOS Update whether success
1. When everything is done. Please turn off the power and restart it again.
Check Factory Mode and make sure it already be updated.

26
C. Monitor Assembly and Disassembly
1 Separate Stand Assy

1.1 Remove Stand Cover
Step 1 :
Take out Stand Assy
Step 2 :
Remove Cover Hinge
Step 3 :
Loose and Remove 4 screws
Step 4:
Remove Stand Assy

27
2 Separate Rear Cover (Rear Case Assy)
Separate Bezel hooks to take Bezel and Rear Cover apart.
Step 1 :
Loose and remove 2 screws.
Step 2 :
Separate Bezel hooks to take
Bezel and Rear Cover apart.
Step 3 :
Remove Rear Cover.
Step 4 :
Completed.

28
3 Remove Power Board
3.1 Remove Metal Cover
Step 1 :
Remove 2 pieces of Backlight wires.
Step 2 :
Loose and remove 4 screws
Step 3 :
Loose and remove 2 screws of power socket.
Step 4 :
Loose and remove 2 screws of Digital socket.

29
Step 5 :
Loose and remove 2 screws of Analog Socket.
Step 6 :
Remove the Metal Cover.
Step 7 :
Completed.
3.2 Remove Power Board
Step 1 :
Remove 2 pieces of Backlight wires.

30
Step 2 :
Step 3 :
Remove Power Board.
Step 4 :
Completed.
4 Change New Power Board
Step 1 :
Insert New Power Board.

31
Step 2 :
Fasten 2 fixed screws
of Power Board.
Step 3 :
Insert 2 pieces of Backlight wires.
Step 4 :
Completed
5. Remove AD PCBA
Step 1 :
Remove 2 FFC from X Board.

32
Step 2 :
Remove FFC from OSD Board.
Step 3 :
Step 4 :
Remove AD PCBA.
Step 4 :
Completed.

33
6. Change New AD PCBA
Step 1 :
Place New AD PCBA.
Step 2 :
Fasten 4 fixed screws of AD PCBA.
Step 3 :
Insert 2 FFC from X Board.
Step 4 :
Insert FFC from OSD Board.
Step 5 :
Completed.

34
7. Remove OSD Board
Step 1 :
Remove FFC.
Step 2 :
Separate both Audio Cable.
Step 3 :
Take OSD Board apart.
Step 4 :
Completed.

35
8.Change New OSD Board
Step 1 :
Place New OSD Board.
Step 2 :
Insert Audio cable to connectors of
New OSD Board.
Step 3 :
Insert FFC to OSD Board.
Step 4 :
Completed.
9. Add Cover to AD PCB Heatsink
Step 1 :
Join the cover hooks of X-PCB.

36
Step 2 :
Fasten 2 fixed screws of Analog
Socket.
Step 3 :
Fasten 2 fixed screws of Digital Socket.
Step 4 :
Fasten 2 fixed screws of Power Socket.
Step 5 :
Fasten 4 fixed screws.
Step 6 :
Insert 2 pieces of Backlight wires.

37
Step 7 :
Completed.
10. Rear Assy Assembly

Step 1 :
Join the Bazel assy .
Step 2 :
Step 3 :
Place Rear Cover.
Step 4 :

38
Step 5 :
Completed.
11. Stand Assy Assembly
Step 1 :
Place Stand Assy.
Step 2 :
Fasten 4 screws to fixed Stand Assy.
Step 3 :
Insert Cover Hinge.
Step 4 :
Insert Seat Assy.

39
6. Trouble Shooting Analysis
Defect Mode Failure Analysis Repair Testing
Light On Test
※ “ Panel Change” Should be Performed to Level 3 Repair stage
Flash Dots
Abnormal
Display Bright Dot
Dark Dot
Backlight
Light Leakage
Mura
Check Panel Panel Change
Image Sticking
Brightness spot
Particle
Dot Defect
Image Remain
Group Bright
Dots
Others Cosmetics
Defect
NG
Next Step TEST
A Completed

40
Display Noise
Check PCBA AD/B Change

Power on
Display Power/B Change
Abnormal
Inverter/B Change
Flicker CNT/B Change
Beat Display
Flicker
Beat Display
Shut Down
Abnormal
AD/B Change
Display Wave
Check PCBA
Power/B Change
CNT/B Change
No Backlight Check Adapter Adapter Change
NG
Next Step TEST
B Completed

41
Display White Check PCBA AD/B Change

Out
Power/B Change
Booting Delay Check PCBA
Inverter/B Change
Brightness OSD/B Change

Even
Abnormal Check PCBA Power/B Change
Inverter/B Change
Beat Display
No Backlight Check Panel Panel Change
Check Adapter Adapter Change
No signal
AD/B Change
Check PCBA CNT/B Change

R.G.B
Display
Abnormal
Check Wire VGA cable Change
Gray Scale DVI cable Change

Display
Abnormal Check Panel Panel Change
NG
Next Step TEST
C
Completed

42
Horizontal
Line Defect
Vertical
Weak Line
Check PCBA AD/B Change
Horizontal
Weak Line
Vertical
Band Defect
Horizontal
Band Defect
Power Saving
Display AD/B Change
Abnormal Check PCBA
AD/B Change
Power/B Change
Peculiar Smell Check PCBA
Inverter/B Change
NG
Next Step TEST
Completed

43
AD/B Change
Power/B Change
Power ON/OFF No Power Check PCBA CNT/B Change

Abnormal
Inverter/B Change
Check PCBA
Turn Off
OSD/B Change
Abnormal
Check Wire
OSD Cable
Check Wire
AC Power Change
DC Power CNT
Cable Change
Check Adapter Adapter Change
AD/B Change
LED Display
Power/B Change
Abnormal LED Off Check PCBA
Inverter/B Change
LED Dark
OSD/B Change
LED Abnormal
OSD Cable Change
LED Loss Check Wire

DC Power CNT
Cable Change
LEDLED
LED Flicker
Adapter Change
NG
Next Step TEST
Completed

44
Abnormal
BIOS & OSD Key AD/B Change
OSD Unavailable
CNT/B Change
OSD Can’t Power/B Change

Input Check PCB
Inverter/B Change
OSD Can’t
Read OSD/B Change
OSD No D-sub cable Change

Display
Check Wire OSD cable Change
OSD Jiggle VGA cable Change
DVI cable Change

OSD Display
Check BIOS BIOS Update
Abnormal
Abnormal
Loudspeaker Voice Loss AD/B Change

CNT/B Change
Abnormal Power/B Change

Loud Check PCBA
Inverter/B Change
L/R
Abnormal OSD/B Change
Check Wire
No Voice OSD Cable Change
Check Loudspeaker Loudspeaker

L/R Same Change
Volume
NG
Loudspeaker Next Step TEST
Noise
Completed

45
Other Abnormal AD/B Change

Display Display Shut Check PCBA
Down Power/B Change
CNT/B Change
AD/B Change
Display Flicker Check PCBA
((tapping ) CNT/B Change
Check PCB AD/B Change

DVI Signal
Display
Abnormal EDID Update
Check EDID Code
Check PCBA TV /B Change

TV Function
Display Check Wire AV Cable Change
Abnormal
Check Controller Remote controller
Change
NG TEST
Next Step
Completed

46
Trouble Shooting Analysis
Check the information in this section to see if the problems can be solved before requesting repair.
Note：The consumers are only allowed to solve the problems described as below. Any
unauthorized product modification, or failure to follow instructions supplied with the
product will end the warranty immediately.
No image
Make sure power button is ON.
Check whether the LCD monitor and computer power cords are plugged and whether there
is a supply of power.
No Signal Input
Check the signal connection between the computer and LCD monitor.
“Out of Range”
Check the computer image output resolution and frequency and compare the value with the
preset values (Please refer to [Appendix-Display Mode]).
Fuzzy Image
Adjust Phase.
Image too bright

Adjust brightness and contrast by OSD.
Image too dark

Adjust brightness and contrast by OSD.
Irregular image
Check the signal connection between the computer and LCD monitor.
Perform Auto Adjust.
Distorted image
Reset the LCD monitor
Take off extra accessories (such as signal extension cord).
Image is not centered
Use OSD Image Menu to adjust H_Position and V_Position.
Check image size setting.
Size is not appropriate

Use OSD Image Menu to adjust H_Position and V_Position.
Check image size setting.
Uneven color
Use OSD Color Menu to adjust color setting.
Color too dark

Dark area distorted

White color is not white


47
7. Recommended Spare Parts List
RECOMMENDED SPARE PARTS LIST (VA1912w-1)
ViewSonic Model Number: VS10866-1W
Rev: 1a
Serial No. Prefix: PXD
Item Description ECR/ECN ViewSonic P/N Ref. P/N Location Universal number# Q'ty
Accessories: Adapter, Lips With Audio, DAC-12M030 A, Ver:0F, 5
1 V/3 A, 12 V/0.7 A, L TYPE, 5 mA, 2470 V A-00004273 27-D003247 1
Power Code, UL, SVT#18/3C, 75℃, LP-30B+LS-13, 32E1818015

2 L=1830+/-50mm, Black, Linetek, 18AWG, No Bag CB-00000544 1
(AJ0A2H1A15/25)
Power Cord, CCC, 300/500V, 0.75mm2, 3C, PC- 32E1818013
3 323+COC-01, L=1830+/-50mm, Black, Linetek, 18AWG, A-00000458 1
(AJ0A2H1C15/25)
No Bag
Power Code, CEE, SP-023+IS-14, H05VV-F, 3G, 32E1818018
4 0.75mm2, CT-12, L=1800+/-50mm, I-SHENG, 18AWG, A-00002058 (AJ0A2H1E15/25) 1
Black, No Bag (AJ0A2H1K15/25)
Power Cord, BSI, H05VV-F, 0.75mm2, 3C, LP-60L+LS-
60, L=1830+/-50mm, Black, 18AWG, PSB Mark, Linetek, 32E1818060
5 A-00002059 1
No Bag (AJ0A2H1K15/25)
Power Cord, VCTF 3G 0.75mm^2 CNS CT-08, Black, 32-D001922

6 BSMI, 1800 mm, I Sheng A-00002057 1
(AJ0A2H1W15/25)
7 Board Assembly: PCBA for , A190A2-H, A190A2-H-S1, 106-03, Rev.03 B-00004274 35-D003166 1
8 PCBA for , A190A2-H, A190A2-H-K3-01, 106-01, B-00004275 35-D004528 1
Cabinets: Rev.01Assy, A190A2-H05, ABS PA757N,
Bezel 40-D004255
9 Silver(Pantone877C), Fuking C-00004281 1
(AJ0A2H1A.C.E.K.W25)
Rear Assy, A190A2-H05, ABS PA757N, 40-D004257
10 Black(J91A11B5), Fuking C-00004282 1
Stand Assy, A190A2-H05, ABS PA757N, 40-D004252
11 Black(J91A11B5), Hontech Precision C-00004283 1
Cover Hinge, A190A2-H05, ABS PA757N, 40-D004250
12 C-00004284 1
Black(J91A11B5), Fuking (AJ0A2H1A.C.E.K.W25)
Seat Assy, A190A2-H05, ABS PA757N, 40-D004259
13 C-00004285 1
Black(J91A11B5), Hontech Precision (AJ0A2H1A.C.E.K.W25)
14 Cables: FFC, FFCX816, 36 Pins, Tennsure, package AL_Foil CB-00004286 32-D002888 2
Accessory Cable, D-Sub, BLACK, Johnson Components
15 & Equipments, A150X2 CB-00004287 32F3018003 1
16 Audio Cable, A150X2, 18AWG, 180cm, Black, JCE CB-00000547 32F2818004 1

17 FFC, A190A2-H05, 15 Pins, Tennsure, L=108.5 CB-00004288 32-D004533 1
Documentation Safety Label for , A190A2-H05, 120 mmx50 mm, Chang 77-D004406
18 Huang, VSC_VA1912W DC-00004289 1
19 Label, Bar-Code Labe, 55*13mm DC-00004291 7741519181 1
Carton Label for , A190A2-H05, 76.2 mmx76.2 mm, 77-D004411
20 Chang Huang, VSC_VA1912W DC-00002073 1
MENU for A190A2-H05, Complex, 1C, Yi-Ching Special 76-D004408
21 DC-00004293 1
Printing, VSC_VA1912W+Caution Card (AJ0A2H1A15/25)
22 Hardware: Screw, M3*P0.5*4, f 5.5*2 HW-00004295 42A9930008 2000
SCREW, M4, P=0.7 mm, L=8 mm, Round Head, Phillips
23 Cross Recess, plate Ni, Screw_with_Washer, SHYE HW-00000553 42-D000649 2000
CHING SCREW, head D8
24 Stand-Off 4 #-40*11.8 HW-00004042 42A9940007 2000
25 Screw, M3*P1.27*12, f 5.5*2 M-00000559 42A9990005 2000
26 Screw, M4*P0.7*15, f 7*2.6, +SW+W HW-00000556 42A9930013 2000
27 Screw, M3*P0.5*6 HW-00000590 42A9930014 2000
28 Miscellaneous: Tape, Security Tape, OPP, L900xW50x0.045mm, VSC HW-00000555 7345511002 1
Packing Material: PE Foam Bag, Protector, 570*600*0.13, A190E1-H01,
29 white M-00000560 7841919921 1
Cushion, A190A2-T05, EPS, WHITE, 450 mmx160

30 mmx145 mm, Sing Home, PS FOAM (TOP) P-00000595 78-D004392 1
Cushion, A190A2-T05, EPS, WHITE, 450 mmx160

31 P-00004296 78-D004388 1
mmx145 mm, Sing Home, PS FOAM (BOTTOM)
Carton, A190A2-H05, 538 mmx158 mmx470 mm, Chen 78-D004412
32 Ti Paper, VSC_VA1912W P-00004297 1

48
RECOMMENDED SPARE PARTS LIST (VA1912wb-1)
Rev: 1a
Serial No. Prefix: PW6
Item Description ECR/ECN ViewSonic P/N Ref. P/N Location Universal number# Q'ty
Accessories: Adapter, Lips With Audio, DAC-12M030 A,
1 Ver:0F, 5 V/3 A, 12 V/0.7 A, L TYPE, 5 mA, A-00004273 27-D003247 1
2470 V
Power Code, UL, SVT#18/3C, 75℃, LP-
32E1818015
2 30B+LS-13, L=1830+/-50mm, Black, Linetek, CB-00000544 1
(AJ0A2H1A15/25)
18AWG, No Bag
Power Cord, CCC, 300/500V, 0.75mm2, 3C,
32E1818013
3 PC-323+COC-01, L=1830+/-50mm, Black, A-00000458 1
(AJ0A2H1C15/25)
Linetek, 18AWG, No Bag
Power Code, CEE, SP-023+IS-14, H05VV-F, 32E1818018
4 3G, 0.75mm2, CT-12, L=1800+/-50mm, I- A-00002058 (AJ0A2H1E15/25) 1
SHENG, 18AWG, Black, No Bag (AJ0A2H1K15/25)
Power Cord, BSI, H05VV-F, 0.75mm2, 3C,
32E1818060
5 LP-60L+LS-60, L=1830+/-50mm, Black, A-00002059 1
(AJ0A2H1K15/25)
18AWG, PSB Mark, Linetek, No Bag
Power Cord, VCTF 3G 0.75mm^2 CNS CT- 32-D001922
6 A-00002057 1
08, Black, BSMI, 1800 mm, I Sheng (AJ0A2H1W15/25)
Board Assembly: PCBA for , A190A2-H, A190A2-H-S1, 106-
7 B-00004274 35-D003166 1
03, Rev.03
PCBA for , A190A2-H, A190A2-H-K3-01,
8 B-00004275 35-D004528 1
106-01, Rev.01
Cabinets: Bezel Assy, A190A2-H05, ABS PA757N, 40-D004254
9 C-00004276 40-D004254 1
Midnight(H93828B5), Fuking (AJ0A2H1A.C.E.K.W15)
Rear Assy, A190A2-H05, ABS PA757N, 40-D004253
10 Midnight(H93828B5), Fuking C-00004277 40-D004253 1
Stand Assy, A190A2-H05, ABS PA757N, 40-D004251
11 C-00004278 40-D004251 1
Midnight(H93828B5), Hontech Precision (AJ0A2H1A.C.E.K.W15)
Cover Hinge, A190A2-H05, ABS PA757N, 40-D004258
12 Midnight Gray(H93828B5), Fuking C-00004279 1
Seat Assy, A190A2-H05, ABS PA757N, 40-D004256
13 Midnight(H93828B5), Hontech Precision C-00004280 40-D004258 1
Cables: FFC, FFCX816, 36 Pins, Tennsure, package
14 CB-00004286 32-D002888 2
AL_Foil
Accessory Cable, D-Sub, BLACK, Johnson
15 CB-00004287 32F3018003 1
Components & Equipments, A150X2
Audio Cable, A150X2, 18AWG, 180cm,
16 CB-00000547 32F2818004 1
Black, JCE
17 FFC, A190A2-H05, 15 Pins, Tennsure, CB-00004288 32-D004533 1
Documentation L=108.5
Safety Label for , A190E3-H0F, 120 mmx50 77-D004413
18 DC-00004290 77-D004406 1
mm, Chang Huang, VSC_VA912-3 (AJ0A2H1A.C.E.K.W25)
19 Label, Bar-Code Labe, 55*13mm DC-00004291 7741519181 1
Carton Label for , A190A2-H05, 76.2 77-D004409
20 DC-00004292 77-D004411 1
mmx76.2 mm, Chang Huang, (AJ0A2H1A.C.E.K.W25)
VSC_VA1912Wb
MENU for VSC_VA912-3+Caution Card,
76-D004438
21 Paper, 1C, Yi-Ching Special Printing, A190E3- DC-00004294 76-D004408 1
(AJ0A2H1C.E.K.W15/25)
H0F
22 Hardware: Screw, M3*P0.5*4, f 5.5*2 HW-00004295 42A9930008 2000
SCREW, M4, P=0.7 mm, L=8 mm, Round
Head, Phillips Cross Recess, plate Ni,
23 HW-00000553 42-D000649 2000
Screw_with_Washer, SHYE CHING SCREW,
head D8
24 Stand-Off 4 #-40*11.8 HW-00004042 42A9940007 2000
25 Screw, M3*P1.27*12, f 5.5*2 M-00000559 42A9990005 2000
26 Screw, M4*P0.7*15, f 7*2.6, +SW+W HW-00000556 42A9930013 2000
27 Screw, M3*P0.5*6 HW-00000590 42A9930014 2000
Miscellaneous: Tape, Security Tape, OPP,
28 HW-00000555 7345511002 1
L900xW50x0.045mm, VSC
Packing Material: PE Foam Bag, Protector, 570*600*0.13,
29 M-00000560 7841919921 1
A190E1-H01, white
Cushion, A190A2-T05, EPS, WHITE, 450
30 mmx160 mmx145 mm, Sing Home, PS FOAM P-00000595 78-D004392 1
(TOP)
Cushion, A190A2-T05, EPS, WHITE, 450
31 mmx160 mmx145 mm, Sing Home, PS FOAM P-00004296 78-D004388 1
(BOTTOM)
Carton, A190A2-H05, 538 mmx158 mmx470 78-D004405
32 P-00004298 78-D004412 1
mm, Chen Ti Paper, VSC_VA1912Wb (AJ0A2H1A.C.E.K.W25)

49
BOM LIST (VA1912w-1 & VA1912wb-1)
Rev: 1a
Serial No. Prefix: PXD / PW6
Item ViewSonic P/N Ref. P/N Description Location Universal number# Q'ty
1 #N/A MJ0A10AK01 19" Wide Semi Product,A190A2,1440X900,TN 1
19" Wide PS TN Asahi 0.7mm glass Cr BM 8ms Fast LC (Panel
2 #N/A L3J009XXXX base) common 1
Polarizer,CF,Degree 135,415.84 mmx262.15 mmx0.215 mm,
3 #N/A 74-D000461 LPT-HL56T-12AGA1SU,M190A1,Optimax common 74-D002213/3612 1
Polarizer,TFT,Degree 135,414 mmx259.7 mmx0.215 mm,
4 #N/A 74-D000462 LPT-HL56T-12SU,M190A1,Optimax common 74-D002212/3613 1
5 #N/A 36X8636401 Driver IC,Scan,HX8636APD400(TSMC),300Channel,HIMAX,RoHS common 3
Driver IC,COF,Data,M190A1-L01,HX8018-A050CBAK,Reel,6
bit,432Channel
6 #N/A 36-D002378 ,HIMAX,RoHS common 10
ACF,COG,AC-8405Z-23 1.5mmX100M,100000 mmx1.5 mm,
7 #N/A 73-C000047 Hitachi Chemical,COG-ACF common 7344191016 0.0017
8 #N/A 7344191017 ACF,AC-4251FY-16,100M/RL common 0.0044
ACF,PCB,AC-9825R-35,100000 mmx1.5 mm,Hitachi
9 #N/A 73-D002676 Chemical,PCB-ACF common 7344191004/011 0.0044
10 #N/A 7349951002 Silicone,TORAY/-9187L,white,330g
PCBA for ,A190A2-H,A190A2-H-X,106-04,Rev.04,WUS common 0.4
PCBA/USI/
11 #N/A 35-D003085 USI /Centron Electronics ,ODM,RoHS common 1
Olympic,19" Wide,Function BOM,D-sub+DVI+Audio,Morning
12 #N/A PJ0AFH0Q00 Star,TN 1
13 #N/A 44-D003584 Backlight Unit,A190A2,Forhouse common 1
14 #N/A 41-D000643 Metal Frame Front,M190A1-L01,SECC 0.6t,Wai-Gin,18.95" common 1
15 M-00000559 42A9940007 Stand-Off 4 #-40*11.8 common 4
16 CB-00004286 32-D002888 FFC,FFCX816,36 Pins,Tennsure,package AL_Foil common 2
17 #N/A 41-D002955 Cover AD Assy,A190A2,secc,JIIN MING Industry common 1
18 HW-00000553 42A9930008 Screw,M3*P0.5*4,f 5.5*2,Steel common 16
SCREW,M4,P=0.7 mm,L=8 mm,Round Head,Phillips Cross
Recess,plate color Zn,
19 HW-00004042 42-D000649 Screw_with_Washer,Shye Ching,head D8 common 1
Lips With Audio,DAC-12M030 A,Ver:0F,5 V/3 A,12 V/0.7 A,L
TYPE,5 mA,2470 V
20 A-00004273 27-D003247 ,Delta Dong Guan/Delta Jiang Su,RoHS common 1
Conductive Tape,PET+Adhesive,409 mmx58.55 mmx0.05
21 #N/A 73-D002886 mm,Mylar_Cover_PcbaX_a190a2 common 1
PCBA for ,A190A2-H,A190A2-H-S1,106-
22 B-00004274 35-D003166 03,Rev.03,ITC/USI,ODM,RoHS common 1
Olympic,19",Accessory BOM,D-sub+Audio,USA 3 pin,Black,Power
built-in;RoHS
Olympic,19",Accessory BOM,D-sub+Audio,China 3 pin,Black,Power
built-in;RoHS
Olympic,19",Accessory BOM,D-sub+Audio,European / Korea 2
pin,Black
,Power built-in;RoHS
PJ0EAAS000(A15.A25) Olympic,19",Accessory BOM,D-sub+Audio,None,Black,Two power
PJ0EACS000(C15.C25) cords of UK
PJ0EAET000(E15.E25) & EU for VSC,Power built-in;RoHS
PJ0EAKU000(K15.K25) Olympic,19",Accessory BOM,D-sub+Audio,Taiwan 3
23 #N/A PJ0EAW5000(W15.W25) pin,Black,Power built-in;RoHS 1
Accessory Cable,D-Sub,BLACK,Johnson Components &
24 CB-00000547 32F3018003 Equipments,A150X2 common 1
25 CB-00000544 32F2818004 Audio Cable,A150X2,18AWG,180cm,Black,JCE common 1
Power Code,UL,SVT#18/3C,75C,LP-30B+LS-13,L=1830+/-
50mm,Black,Linetek,18AWG
26 A-00000458 32E1818015 ,No Bag A15.25 32E1818019 1
Power Cord,CCC,300/500V,0.75mm2,3C,PC-323+COC-
01,L=1830+/-50mm,
27 A-00002058 32E1818013 Black,Linetek,18AWG,No Bag C15.25 32E1818021 1
Power Code,CEE,SP-023+IS-14,H05VV-F,3G,0.75mm2,CT-
12,L=1800+/-50mm,
28 A-00002059 32E1818018 I-SHENG,18AWG,Black,No Bag E.K15.25 32E1818016 1
Power Cord,BSI,H05VV-F,0.75mm2,3C,LP-60L+LS-60,L=1830+/-
50mm,
29 A-00002057 32E1818060 Black,18AWG,PSB Mark,Linetek,No Bag K15.25 32E1818020 1
Power Cord,VCTF 3G 0.75mm^2 CNS CT-08,Black,BSMI,1800
30 CB-00004287 32-D001922 mm,I Sheng W15.25 1

50
Olympic,A190A2,ID BOM,D-sub+DVI+Audio,USA,Black,VSC,
Olympic,A190A2,ID BOM,D-sub+DVI+Audio,USA,Silver
Black,VSC,
Olympic,A190A2,ID BOM,D-sub+DVI+Audio,China,Black,VSC,
PJ0AI15200(A15) Olympic,A190A2,ID BOM,D-sub+DVI+Audio,China,Silver
PJ0AI25200(A25) Black,VSC,
PJ0AI15203(C15) Olympic,A190A2,ID BOM,D-
PJ0AI25203(C25) sub+DVI+Audio,European,Black,VSC,
PJ0AI15201(E15) Olympic,A190A2,ID BOM,D-sub+DVI+Audio,European,Silver
PJ0AI25201(E25) Black,VSC,
PJ0AI15202(K15) Olympic,A190A2,ID BOM,D-sub+DVI+Audio,UK,Black,VSC,
PJ0AI25202(K25) Olympic,A190A2,ID BOM,D-sub+DVI+Audio,UK,Silver
PJ0AI15204(W15) Black,VSC,
31 #N/A PJ0AI25204(W25) Olympic,A190A2,ID BOM,D-sub+DVI+Audio,TWN,Black,VSC, 1
Bezel Assy,A190A2-H05,ABS
32 C-00004276 40-D004254 PA757N,Midnight(H93828B5),Fuking A.C.E.K.W15 1
33 C-00004281 40-D004255 Bezel Assy,A190A2-H05,ABS PA757N,Silver(Pantone877C),Fuking A.C.E.K.W25 1
34 C-00004277 40-D004253 Rear Assy,A190A2-H05,ABS PA757N,Midnight(H93828B5),Fuking A.C.E.K.W15 1

35 C-00004282 40-D004257 Rear Assy,A190A2-H05,ABS PA757N,Black(J91A11B5),Fuking A.C.E.K.W25 1
Stand Assy,A190A2-H05,ABS
36 C-00004278 40-D004251 PA757N,Midnight(H93828B5),Hontech Precision A.C.E.K.W15 1
Stand Assy,A190A2-H05,ABS PA757N,Black(J91A11B5),Hontech
37 C-00004283 40-D004252 Precision A.C.E.K.W25 1
Cover Hinge,A190A2-H05,ABS PA757N,Midnight
38 C-00004279 40-D004258 Gray(H93828B5),Fuking A.C.E.K.W15 1
39 C-00004284 40-D004250 Cover Hinge,A190A2-H05,ABS PA757N,Black(J91A11B5),Fuking A.C.E.K.W25 1
Seat Assy,A190A2-H05,ABS
40 C-00004280 40-D004256 PA757N,Midnight(H93828B5),Hontech Precision A.C.E.K.W15
Seat Assy,A190A2-H05,ABS PA757N,Black(J91A11B5),Hontech
41 C-00004285 40-D004259 Precision A.C.E.K.W25
PCBA for ,A190A2-H,A190A2-H-K3-01,106-
42 B-00004275 35-D004528 01,Rev.01,USI/ITC,ODM,RoHS common 1
43 CB-00004288 32-D004533 FFC,A190A2-H05,15 Pins,Tennsure,L=108.5 common 32-D004534 1
44 HW-00000590 42A9930013 Screw,M4*P0.7*15,f 7*2.6,Steel,+SW+W common 4
45 HW-00000555 42A9930014 Screw,M3*P0.5*6,Steel common 4
46 HW-00000556 42A9990005 Screw,M3*P1.27*12,f 5.5*2,Steel common 2
Software
(BIOS),A190A2,Ver.NR19A2LS2000,ViewSonic,Checksum(xxxx),L
47 #N/A 10-D004477 VDS,All in one common
Software (EDID_D-
SUB),A190A2,Ver.NRVSC711CA00,ViewSonic,Checksum(xx),VA
48 #N/A 10-D004475 1912w,Analog port common
Software (EDID_DVI),A190A2,Ver.NRVSC711CD00,ViewSonic,
49 #N/A 10-D004474 Checksum(xx),VA1912w,DVI port common
50 #N/A 7345511002 Tape,Security Tape,OPP,L900xW50x0.045mm,VSC common 0.058
Safety Label for ,A190A2-H05,120 mmx50 mm,Chang
51 DC-00004289 77-D004406 Huang,VSC_VA1912W A.C.E.K.W15 1
Safety Label for ,A190A2-H05,120 mmx50 mm,Chang
52 DC-00004290 77-D004413 Huang,VSC_VA1912Wb A.C.E.K.W25 1
SN Label for ,A190A2-H05,50 mmx25 mm,Chang
53 #N/A 77-D004407 Huang,VSC_VA1912W A.E.K.W15 1
54 #N/A 77-D004415 Huang,VSC_VA1912Wb A.E.K.W25 1
55 #N/A 77-D004404 Huang,VSC_VA1912W_for China C15 1
56 #N/A 77-D004417 Huang,VSC_VA1912Wb_for China C25 1
57 #N/A 77-D000114 Customer Label,A170E1-H0G,180 mm,100 mm C15.25 1
58 #N/A 77-D000118 Customer Label,A170E1-H0G,130 mm,80 mm C15.25 1
Customer Label for ,A170E1-H0G,15 mmx15 mm,Chang Huang,QC
59 #N/A 77-D001323 Pass Label_VSC_for China C15.25 1
60 #N/A 7741513161 Label,Pallet Barcode Label,75*40,A150X1-T02 common 0.021
61 #N/A 7741519181 Label,Bar-Code Labe,55*13mm common 1
Carton Label for ,A190A2-H05,76.2 mmx76.2 mm,Chang
62 DC-00004291 77-D004411 Huang,VSC_VA1912W A.C.E.K.W15 1
Carton Label for ,A190A2-H05,76.2 mmx76.2 mm,Chang
63 DC-00004292 77-D004409 Huang,VSC_VA1912Wb A.C.E.K.W25 1
Carton,A190A2-H05,538 mmx158 mmx470 mm,Chen Ti
64 P-00004297 78-D004412 Paper,VSC_VA1912W A.C.E.K.W15 1

51
Carton,A190A2-H05,538 mmx158 mmx470 mm,Chen Ti
65 P-00004298 78-D004405 Paper,VSC_VA1912Wb A.C.E.K.W25 1
Cushion,A190A2-T05,EPS,WHITE,450 mmx160 mmx145 mm,Sing
66 HW-00004295 78-D004392 Home,PS FOAM (TOP) common 1
Cushion,A190A2-T05,EPS,WHITE,450 mmx160 mmx145 mm,Sing
67 P-00004296 78-D004388 Home,PS FOAM (BOTTOM) common 1
68 #N/A 7841919921 PE Foam Bag,Protector,570*600*0.13,A190E1-H01,white common 1
69 #N/A 7841595111 Corner Protector,50 mmx50 mmx1850 mm common 0.083
70 #N/A 7841995111 Separator, 1130x955x11,A190E1-H01 common 0.021
Pallet,N150X6,Wooden,Fumigation,1200 mmx1000 mmx135
71 #N/A 78-D000801 mm,Hua Sun Paper common 0.021
MENU for A190A2-H05,Complex,1C,Yi-Ching Special
72 DC-00004293 76-D004408 Printing,VSC_VA1912W+Caution Card A15.25 1
MENU for A190A2-H05,Complex,1C,Yi-Ching Special C.E15,
73 DC-00004294 76-D004438 Printing,VSC_VA1912W CD_Rom K.W15/25 1
MENU for A190A2-H05,Complex,1C,Yi-Ching Special
74 #N/A 76-D004437 Printing,VSC_VA1912Wb CD_Rom C.E25 1
75 #N/A 79-D004425 Shipping Package Information for ,A190A2-H05,ViewSonic common 1
76 #N/A 78-D000275 Warranty Card,A170E1-H0G,143 mmx210 mm,VSC_VA712 C15.25 1

52
8. Exploded Diagram and Exploded Parts List
ViewSonic Corporation
Model
Title
Date Rev:

53
EXPLODED PARTS LIST (VA1912w-1 & VA1912wb-1)
Rev: 1a
Serial No. Prefix: PXD / PW6
Item ViewSonic P/N Ref. P/N Description
1 #N/A 44-D003584 Backlight Unit,A190A2,Forhouse
2 L3J009XXXX 19" Wide PS TN Asahi 0.7mm glass Cr BM 8ms Fast LC (Panel base)
#N/A
3 #N/A 41-D000643 Metal Frame Front,M190A1-L01,SECC 0.6t,Wai-Gin,18.95"
4 HW-00000555 42A9930014 Screw,M3*P0.5*6,f 5.3*2.3,Steel
Lips With Audio,DAC-12M030 A,Ver:0F,5 V/3 A,12 V/0.7 A,L TYPE,5
5 27-D003247 mA,2470 V,
A-00004273 Delta Dong Guan/Delta Jiang Su,RoHS
PCBA for ,A190A2-H,A190A2-H-S1,106-
6 35-D003166
B-00004274 03,Rev.03,ITC/USI,ODM,RoHS
7 HW-00000555 42A9930014 Screw,M3*P0.5*6,f 5.3*2.3,Steel
8 #N/A 41-D002955 Cover AD Assy,A190A2,secc,JIIN MING Industry
9 C-00004276 40-D004254 Bezel Assy,A190A2-H05,ABS PA757N,Midnight(H93828B5),Fuking
C-00004281 40-D004255 Bezel Assy,A190A2-H05,ABS PA757N,Silver(Pantone877C),Fuking
10 C-00004277 40-D004253 Rear Assy,A190A2-H05,ABS PA757N,Midnight(H93828B5),Fuking
C-00004282 40-D004257 Rear Assy,A190A2-H05,ABS PA757N,Black(J91A11B5),Fuking
11 HW-00000557 42A9930017 Screw,f 3*P1.27*8,f 5.5*2,Steel
12 C-00004278 40-D004251 Stand Assy,A190A2-H05,ABS PA757N,Midnight(H93828B5),Hontech
40-D004252 Stand Assy,A190A2-H05,ABS PA757N,Black(J91A11B5),Hontech
C-00004283 Precision
40-D004258 Cover Hinge,A190A2-H05,ABS PA757N,Midnight Gray(H93828B5)
13
C-00004279 ,Fuking
C-00004284 40-D004250 Cover Hinge,A190A2-H05,ABS PA757N,Black(J91A11B5),Fuking
Seat Assy,A190A2-H05,ABS PA757N,Midnight(H93828B5),Hontech
14 40-D004256
40-D004259 Seat Assy,A190A2-H05,ABS PA757N,Black(J91A11B5),Hontech

54
9. Block Diagram
OSD Key Pad Audio Out Speaker
Audio
3.3V
DVI-D LCD Module

Digital Video Main Board
D-sub
Analog Video
Signal
Backlight
DC-5V Audio
Control
DC-12V
AC Power Backlight
LIPS
Audio
Audio In
AMP

55
10. Schematic Diagrams
B8 B13
B2 B10 PANEL_INTERFACE
DSUB_DET BR2N
DSUB_DET BR2N BR2P BR2N
RIN
RIN RIN BR2P BR1N BR2P
GNDR
V5A GNDR GIN GNDR BR1N BR1P BR1N
VGA_5V VGA GIN GNDG GIN BR1P BR0N BR1P
GNDG GNDG BR0N BR0P BR0N
VGA_5V SOG
DDC_CLK BIN SOG BR0P BR0P
SOG
DDC_DAT DDC_CLK BIN GNDB BIN BG2N
HSYNC GNDB BG2N BG2P BG2N
DDC_DAT GNDB
V5A_ESD VSYNC HSYNC BG2P BG1N BG2P
HSYNC
VSYNC BG1N BG1P BG1N
V5A_ESD VSYNC
BG1P BG0N BG1P
BG0N BG0P BG0N
B3 R+ BG0P BG0P
R+ R- R+ BB2N
G+ R- BB2N BB2P BB2N
V5A_ESD R- BB2P
G+ G- G+ BB1N BB2P
DVI B+ BB1N BB1P BB1N
V5A G- G-
DCC2_CLK B- BB1P BB0N BB1P
B+ B+
CLK+ BB0N BB0P BB0N
DCC2_CLK B- B-
DCC2_DAT CLK- RXO3+ BB0P BB0P
CLK+ CLK+
DVI_5V CLK- RXO3- RXO3+ FR2N
DCC2_DAT CLK- RXO3+
RXO3- RXO2+ RXO3- FR2N FR2P FR2N
DVI_5V RXO2+ FR2P
B4 RXO2+ RXO2- FR1N FR2P
DCC2_DAT RXO1+ RXO2- FR1N FR1P FR1N
DCC2_DAT RXO2-
RXO1- RXO1+ FR1P FR0N FR1P
B7 RXO1+
DCC2_CLK DVI_5V RXO0+ RXO1- FR0N FR0P FR0N
DCC2_CLK DVI_5V RXO1-
RXO0- RXO0+ FR0P FR0P
OSD DSUB_DET RXO0+
VGA_5V RXOC+ RXO0- FG2N
DDC_CLK VGA_5V RXO0- FG2N
VCPU RXOC- RXOC+ FG2P FG2N
DDC_DAT RXOC+ FG2P
VCPU VCPU RXOC- FG1N FG2P
VCPU RXOC- FG1N
TCON_RESET FG1P
LED_OR TCON_RESET
LED_OR
MCU CM2706B FG1P FG0N
FG1N
FG1P
LED_OR LED_BL TST_PGI FG0N FG0P FG0N
LED_BL SOURCE_SELECT LED_BL TST_PGI RXE3+ FG0P
SOURCE_SELECT FG0P
SOURCE_SELECT MENU
CSZ
CSZ SCALER RXE3+
RXE3- RXE3+ FB2N
KEY_DOWN MENU SCL RXE2+ RXE3- FB2N FB2P
MENU SCL CSZ RXE3- FB2N
KEY_UP
KEY_DOWN SDA RXE2- RXE2+ FB2P FB1N
KEY_DOWN SDA SCL RXE2+ FB2P
AUTO_ADJ KEY_UP HWRESET RXE1+ RXE2- FB1N FB1P
KEY_UP SDA FB1N
PWR_SW AUTO_ADJ HWRESET INT
RXE2- RXE1- RXE1+ FB1P FB0N
AUTO_ADJ INT HWRESET FB1P
PWR_SW RXE1+ RXE0+ FB0N FB0P
PWR_SW AD0 RXE1- FB0N
AUDIO_ON V5A AD0 INT RXE1- RXE0- FB0P
AD3 RXE0+ FB0P
AUDIO_ON AD3 AD0 RXE0+ FCKN
INV_ON/OFF AD1 RXEC+ RXE0-
DCDC_ON/OFF INV_ON/OFF AD1 AD3 RXE0- FCKN FCKP
AD2 RXEC- RXEC+ FCKN
DCDC_ON/OFF AD2 AD1 RXEC+ FCKP FSTH
PANEL_ON/OFF RXEC- FCKP
VCM_PWM PANEL_ON/OFF XAOI AD2 RXEC- FSTH
AUD_DET VCM_PWM XAOI BCKN FSTH
AUDIOR- AUD_DET BCKN BCKP
V33A BCKP BCKN
AUDIOR- BSTH
AUDIOR+ BCKP
INV_ADJ BSTH
BSTH
AUDIOR+ STB
AUDIOL- INV_ADJ STB POL
VOL_ADJ STB
AUDIOL- POL POL
AUDIOL+ CPV
TCON_RESET CPV STV
AUDIOL+ CPV
TCON_RESET STV OE STV
OE OE
TST_PGI
B9
TST_PGI GVON
GVON GVOFF GVON
B11 V33T GVOFF
INVERTER I/F GVOFF
V5A PANEL_ON/OFF V33T
AUDIOL+
V33A V5A V18C
AUDIOL- V33C
V33A
AUDIOR+
VCM_PWM
AUDIOR-
AUD_DET DCDC_ON/OFF PANEL_ON/OFF
V33T
AUD_DET
V12A DCDC_ON/OFF
V33T V12A
VOL_ADJ
V18C
V33C
VOL_ADJ V33P
AUDIO_ON V33P V5A
AUDIO_ON POWER V5A
V18C
XAOI
V33C
XAOI
V5A
V33C
V12A
V12A
INV_ON/OFF
INV_ADJ
Model TOP
Title
Date Rev:

56
V33C L13 VPO
HCB2012KF-420T40/RoHS
V33C 1 2
C59 C60 C61 C62 C63 C64 C65 C66

1206/10u/16V/X/PbF 0603/100n/16V/7/PbF 0603/100n/16V/7/PbF 0603/100n/16V/7/PbF 0603/100n/16V/7/PbF 0603/100n/16V/7/PbF 0603/100n/16V/7/PbF 0603/100n/16V/7/PbF
GND
V18C L14 VDD

V18C 1 2
C67 C68 C69 C70 C71

1206/10u/16V/X/PbF 0603/100n/16V/7/PbF 0603/100n/16V/7/PbF 0603/100n/16V/7/PbF 0603/100n/16V/7/PbF
VAD VPLLVDVI VDPLL VPO VDD
GND
104
114
117
126
65
53
51
55
35
45
11
21
84
94
18
87
97
U9
AVDD_PLL
AVDD
AVDD_DVI
VDDP
VDDP
AVDD_DVI
VDDP
VDDP
VDDP
VDDP
VDDP
AVDD
AVDD_MPLL
VDDC
VDDC
VDDC
VDDC
RIN 63 LVA3P 102 RXE3+
RIN RIN0 RXE3+
GNDR 62 LVA3M 103 RXE3-
GNDR RIN0M RXE3-
GIN GIN 60 LVACKP 106 RXEC+
GIN0 RXEC+
GNDG GNDG 59 LVACKM 107 RXEC-
GIN0M RXEC- L15
SOG SOG 61 108 RXE2+ V33C VAD
SOGIN0 LVA2P RXE2+
BIN 58 109 RXE2- HCB2012KF-420T40/RoHS
BIN BIN0 LVA2M RXE2-
GNDB GNDB 57 LVA1P 110 RXE1+ 1 2
BIN0M RXE1+ V33C
HSYNC HSYNC 37 LVA1M 111 RXE1-
HSYNC0 RXE1-
VSYNC VSYNC 38 LVA0P 112 RXE0+
VSYNC0 RXE0+
29 NC 113 RXE0_
LVA0M RXE0-
28 C72 C73 C74
NC 0603/100n/16V/7/PbF
27 98 1206/10u/16V/X/PbF 0603/100n/16V/7/PbF
NC NC
26 NC 99
NC
NC 100
40 R+ 101
R+ NC
41 R- GND
R- 43 G+ NC 88
G+ 44 G- NC 89
G- 46 B+ NC 90
B+ 47 B- NC 91
B- 49 CK+ NC 92
CLK+ 50 CK- NC 93
CLK- R89 0603/390R/1%/RoHS 52
VDVI REXT
NC 16
NC 17
22 V33C L16 VPLL
NC
23 HCB2012KF-420T40/RoHS
NC
66 NC 24 1 2
REFP V33C
NC 25
C75 C78
0805/1u/25V/5/C/RoHS 0603/100n/16V/7/PbF 67 8
REFM NC
TSU56AK-LF NC 9
12
C76
1206/10u/16V/X/PbF
C77
0603/100n/16V/7/PbF
NC
NC 13
NC 14
NC 15
GND
69 LVB3P 118 RXO3+
CSZ ALE/CSZ RXO3+
71 LVB3M 119 RXO3-
SCL RDZ/SCL RXO3-
70 LVBCKP 120 RXOC+
SDA WRZ/SDA RXOC+
R90 0603/100R/5%/RoHS 32 LVBCKM 121 RXOC-
HWRESET HWRESET 122 RXOC-
INT 72 INT LVB2P RXO2+
R91 123 RXO2+
INT LVB2M RXO2-
0603/1K/5%/RoHS C79 124 RXO2- V33C L17 VDVI
LVB1P RXO1+ RXO1+
0603/100n/16V/7/PbF 125 RXO1- HCB2012KF-420T40/RoHS
LVB1M RXO1-
LVB0P 128 RXO0+ 1 2
1 RXO0+ V33C
LVB0M RXO0-
2
RXO0-
GND INV_ADJ 73 NC 4
INV_ADJ PWM0 C82
VOL_ADJ 74 NC 5 C80 C81 C83
VOL_ADJ PWM1 75 0603/100n/16V/7/PbF 0603/100n/16V/7/PbF 0603/100n/16V/7/PbF
NC V33C 1206/10u/16V/X/PbF
C84 0603/22p/50V/N/RoHS NC 76 D20
1
33 XIN NC 83 BZT52C3V6S-F/RoHS
NC 82
Y2 R92 NC 81 GND
14.31818MHz NC 80
Do Not Stuff NC 79 R93
34 XOUT 0603/4.7K/5%/RoHS
C85 0603/22p/50V/N/RoHS AD0 30
77 AD0
AD1 AD1
3 AD2 78
BYPASS 31 AD2
C86 2 AVSS_LPLL AD3
6 AD3
AVSS_MPLL
0603/100n/16V/7/PbF BUSTYPE
AVSS_DVI
AVSS_PLL
AVSS_DVI
AVSS_DVI
NC 7
GND
GNDC
GNDC
GNDC
GNDC
GNDP
GNDP
GNDP
GNDP
GNDP
GNDP
GNDP
AVSS
AVSS
AVSS
R94 V33C L18 VDPLL

Do Not Stuff 1 2
68
64
48
116
10
42
20
105
54
96
85
95
36
115
127
19
86
56
39
V33C
R95 GND C87 C88

0603/0R/5%/RoHS 1206/10u/16V/X/PbF 0603/100n/16V/7/PbF
GND
GND
Model SCALER
Title
Date Rev:

57
0603/1K/5%/RoHS V33C
R16 V33C
V33C R18 0603/10K/5%/RoHS
V5A1
R17 V5A 1 TP
3
C12 Q1 R19 0603/4.7K/5%/RoHS DoVIN_12V1
Not Stuff
2N7002/RoHS 1 VIN_12V 1 TP
INV_ADJ Q2
Do Not Stuff
3
0603/4.7K/5%/RoHS C13 2N7002/RoHS Do Not Stuff
Do Not Stuff R20 INV_ON/OFF1
0603/4.7K/5%/RoHS
1 INV_ON/OFF1
INV_ON/OFF TP
GND
2
R21
Do Not Stuff INV_ADJ1
Do Not Stuff
INV_ADJ 1
V5A TP
LP1 Do Not Stuff

GND
V5A
FBMJ2125HS420/PbF
+ CP2 CP3
CP1 1206/10u/16V/5/RoHS
UWT1E101MCL1GS/RoHS 1210/4.7u/25V/5/RoHS
16 LP2 FBMJ2125HS420/PbF
15
14
GND GND GND LP3 FBMJ2125HS420/PbF
13 GND_INV
12
AUD_DET LP4 FBMJ2125HS420/PbF
11 AUD_DET LP5
10 VIN_12V FP1 FBMJ2125HS420/PbF V12A
9
8 1 2
V12A
7 VOL
MUTE 3216FF/1206/3A/RoHS [INV_GND] GND
6
1
5
4 AUDIOR- R22 CP5 CP6
CP4
3 AUDIOR+ 1210/4.7u/25V/5/RoHS
1210/4.7u/25V/5/RoHS
0603/0R/5%/RoHS LV470M025E055R
2
2
AUDIOL-
1 AUDIOL+
CN4
Header2X8FR2.54 MUTE
GND
V5A V5A V5A
R23
VOL1 0603/10K/5%/RoHS
VOL_ADJ1
1 R24 1
0603/1K/5%/RoHS C14
Low: MUTE OFF
3
TP0610K/PbF 1
Do Not Stuff Q4
Q3
1 AUDIO_ON
0603/10K/5%/RoHS 2N7002/RoHS
2
R25 VOL
3
C15
0603/100n/25V/Y/RoHS
Q5 R26
VOL_ADJ 1
C16 C17
2
2N7002/RoHS Do Not Stuff 1206/10u/16V/5/RoHS 0603/100n/25V/7/RoHS R27 GND GND

0603/1K/5%/RoHS
GND
MUTE
R28
GND
Do Not Stuff
Model INVERTER I/F
Title
Date Rev:

58
V33T1
V5A V33T
Q16
1
AP2305GN/RoHS U4 LM1117MPX-3.3/RoHS
V5A 2 3 3 VIN VOUT 2 V33T
4
GND
VOUT
+ C37 0603/1n/50V/7/RoHS
1
C38 C39 + C41
1
LV470M025E055R/RoHS 0603/100n/25V/7/RoHS C40
R86 0603/100n/25V/7/RoHS LV470M025E055R/RoHS
0603/4.7K/5%/RoHS
GND
GND
3
Q17
R87 1 2N7002/RoHS GND
PANEL_ON/OFF
0603/1K/5%/RoHS
2
R88 C42
0603/100K/5%/RoHS 0603/100n/25V/7/RoHS
GND
GND
V33A1
Do Not Stuff
V5A
1 TP
L9 FBMJ2125HS420/PbF U5 LM1117MPX-3.3/RoHS
3 2 V33A
V5A VIN VOUT V33A
4
GND
VOUT
C43 C44 1 C45 C46

1206/22u/16V/Y/RoHS 0603/100n/25V/7/RoHS 1206/22u/16V/Y/RoHS 0603/100n/25V/7/RoHS
GND
V33C1
Do Not Stuff
1 TP
3 2 V33C
VIN VOUT V33C
4
GND
VOUT
1
C47 C49
C48 C50
1206/22u/16V/Y/RoHS 0603/100n/25V/7/RoHS 1206/22u/16V/Y/RoHS 0603/100n/25V/7/RoHS
GND
V18V1
PP1 Do Not Stuff Do Not Stuff
PP2 Do Not Stuff
1 TP
L11 D19 U7
D18
1 2 1 2 3 2 V18C V18C
FBMJ2125HS420/PbF VIN VOUT
4
GND
EC31QS03L/RoHS EC31QS03L/RoHS VOUT
AIC1084-18CM/RoHS
1
C53
C51
C52 1206/22u/16V/Y/RoHS C54
1206/22u/16V/Y/RoHS 0603/100n/25V/7/RoHS 0603/100n/25V/7/RoHS
GND
V33P1
Do Not Stuff
1TP

3 2 V33P
VIN VOUT V33P
4
GND
VOUT
1
C55
1206/22u/16V/Y/RoHS
C56
0603/100n/25V/7/RoHS
C57
1206/22u/16V/Y/RoHS
C58
0603/100n/25V/7/RoHS ViewSonic Corporation
Model POWER
GND Title
Date Rev:

59
BB2P
BB2N
BB1P STV
STV1 R96 0603/10R/5%/RoHS
BB1N STV
C89
BB0P
R97 BB0N
Do Not Stuff
RXOC+ RXOC- RXEC+ R98 RXEC-
BCKP
CPV1 R99 0603/10R/5%/RoHS CPV
BCKN CPV
0603/100R/1%/RoHS 0603/100R/1%/RoHS C90
R100 Do Not Stuff
RXO0+ RXO0- RXE0+ R101 RXE0-
OE1 R102 0603/10R/5%/RoHS OE
0603/100R/1%/RoHS OE
0603/100R/1%/RoHS C91
R103
Do Not Stuff
VCC_RSDS
CKPHS1
CKPHS2
CKPHS0
VCC_TC
VCC_TC
GVOFF1
GVON1
0603/100R/1%/RoHS
IDREV
BSTHI
RBSW
0603/100R/1%/RoHS
BCKN
BCKP
OP8B
BB0N
CPV1
BB2N
BB1N
BB2P
BB1P
BB0P
STV1
GND
GND
GND
GND
IP8B
OE1
FSTHI R106 0603/10R/5%/RoHS FSTH
R105 C92 FSTH
Do Not Stuff
0603/100R/1%/RoHS 0603/100R/1%/RoHS
BSTHI R108 0603/10R/5%/RoHS BSTH
R109 BSTH
C93
65
69
68
67
66
70
74
73
72
71
76
75
79
78
77
83
82
81
80
84
93
87
92
90
89
88
86
85
96
95
94
91
U10
Do Not Stuff
0603/100R/1%/RoHS 0603/100R/1%/RoHS
B_G[3]P
VSS_RSDS
B_CKHP
VDD_RSDS
B_B[1]P
B_B[0]P
B_B[2]P
B_G[3]N
VSS_RSDS
B_B[3]P
B_CKHN
VSS
B_B[0]N
OE
B_B[1]N
IDREV
CKPHS0
B_B[3]N
B_B[2]N
CKV
VSS
GVOFF
CKPHS1
OP8B
IP8B
STV
CKPHS2
BSTH
VDD
VDD
GVON
RBSW
STB1 R111 0603/10R/5%/RoHS STB
V33T STB
C95
OEPW1 97 Do Not Stuff

OEPW1
R114 GND 98 64 BG2P
LRGND_LVDS B_G[2]P BG2P R112 0603/10R/5%/RoHS
Do Not Stuff RXO0- 99 63 BG2N POL1 POL
RAMP1 B_G[2]N BG2N POL
RXO0+ 100 62 BG1P C96
RAPP1 B_G[1]P BG1P
RESET_N RXO1- 101 61 BG1N
RBMP1 B_G[1]N BG1N
Q18 RXO1+ 102 60 BG0P Do Not Stuff
RBPP1 B_G[0]P BG0P
3
Do Not Stuff VCC_LVD 103 59 BG0N

LRVDD_LVDS B_G[0]N BG0N
C97 RXO2- 104 58 VCC_RSDS
Do Not Stuff RCMP1 VDD_RSDS
TCON_RESET R115 1 RXO2+ 105 57 GVON1 R116 0603/10R/5%/RoHS GVON
RCPP1 B_R[3]P GVON
Do Not Stuff RXOC- 106 56 C98
RCLKMP1
2
B_R[3]N
RXOC+ 107 55 BR2P
RCLKPP1 B_R[2]P BR2P
RXO3- 108 54 BR2N Do Not Stuff
RDMP1 B_R[2]N BR2N
R113 GND RXO3+ 109 RDPP1 53 BR1P
B_R[1]P BR1P
pin103 pin118 GND 110 52 BR1N GVOFF1 R117 0603/10R/5%/RoHS GVOFF
LRGND_LVDS B_R[1]N BR1N GVOFF
VCC_LVD GND 111 51 BR0P C99
V33T LPGND_LVDS CM2706A-KT B_R[0]P BR0P
VCC_LVA 112 LPVDD_LVDS 50 BR0N
0603/0R/5%/RoHS B_R[0]N BR0N
GND 113 49 GND Do Not Stuff
C94 LRGND_LVDS VSS_RSDS
C100 C101 114 48 PI
0805/4.7u/6.3V/5/RoHS RXE0- RAMP2 PI
0603/100n/25V/7/RoHS 0603/100n/25V/7/RoHS 115 47 FR0N
RXE0+ RAPP2 A_R[0]N FR0N
RXE1- 116 RBMP2 46 FR0P
A_R[0]P FR0P
GND GND GND RXE1+ 117 RBPP2 45 FR1N
A_R[1]N FR1N
VCC_LVD 118 LRVDD_LVDS 44 FR1P
A_R[1]P FR1P
RXE2- 119 RCMP2 43 FR2N
A_R[2]N FR2N
RXE2+ 120 RCPP2 42 FR2P
A_R[2]P FR2P
RXEC- 121 RCLKMP2 41
R118 A_R[3]N
pin112 pin127
RXEC+ 122 RCLKPP2 40
A_R[3]P
VCC_LVA RXE3- 123 RDMP2 39 VCC_RSDS
V33T VDD_RSDS
124 RDPP2 38 FG0N
RXE3+ A_G[0]N FG0N
0603/0R/5%/RoHS GND 125 LRGND_LVDS 37 FG0P
C104 A_G[0]P FG0P
C102
0805/4.7u/6.3V/5/RoHS
GND GND
C103
0603/100n/25V/7/RoHS 0603/100n/25V/7/RoHS
GND
GND
VCC_LVA
MTSIDE
126
127
128
LPGND_LVDS
LPVDD_LVDS
MTSIDE
* A_G[1]N
A_G[1]P
A_G[2]N
A_G[2]P
36
35
34
33
FG1N
FG1P
FG2N
FG2P
FG1N
FG1P
FG2N
FG2P
VDD_RSDS
VSS_RSDS
VSS_RSDS
V33T
RESET_N
A_CKHN
A_CKHP
A_G[3]N
TST_PG
A_G[3]P
A_B[1]N
A_B[0]N
A_B[3]N
A_B[2]N
A_B[0]P
A_B[1]P
A_B[3]P
A_B[2]P
TEST1
TEST0
TPPW
CNTP
ASTH
OES0
RES1
RES0
F2LN
VDD
VDD
VSS
POL
VSS
TP1
R119
pin27 pin39 pin58 pin70
VCC_RSDS
31
32
30
29
28
24
25
26
27
23
20
22
15
18
19
21
17
16
14
10
9
11
12
13
6
7
8
5
1
4
2
3
V33T
0603/0R/5%/RoHS
C106
C105 C107 C108 C109
0603/100n/25V/7/RoHS
VCC_RSDS
0805/4.7u/6.3V/5/RoHS 0603/100n/25V/7/RoHS 0603/100n/25V/7/RoHS
RESET_N
VCC_TC
VCC_TC
TST_PG
GND GND GND GND GND TPPW
FSTHI
FCKN
CNTP
OES0
FCKP
RES1
POL1
RES0
FB0N
FB1N
FB2N
STB1
FB0P
FB1P
FB2P
F2LN
GND
GND
GND
GND
0603/100n/25V/7/RoHS
R120 R121
R122 GND PI
pin8 pin17 pin80 pin89
VCC_TC 0603/8.2K/1%/RoHS 0603/3K/1%/RoHS
V33T FCKN
FCKP
C110 0603/0R/5%/RoHS
0805/4.7u/6.3V/5/RoHS C111 C112 C113 C114
GND
0603/100n/25V/7/RoHS 0603/100n/25V/7/RoHS 0603/100n/25V/7/RoHS
FB0N
FB0P
GND GND GND GND GND FB1N
0603/100n/25V/7/RoHS R123 FB1P
VCC_TC RES1 FB2N 20x1.3/11.2k=2.3mA
R124 0603/1K/1%/RoHS FB2P
RES0
Do Not Stuff
R125 VCC_TC R126 CKPHS0

Do Not Stuff
Do Not Stuff
R127 TST_PG R128 CKPHS1 V33T
Do Not Stuff Do Not Stuff
R129 CKPHS2 R130

Do Not Stuff 0603/10K/1%/RoHS
R131 F2LN
0603/1K/1%/RoHS
R132 R133 IP8B TST_PG
GND Do Not Stuff Do Not Stuff
R134 OP8B Q19
3
Do Not Stuff 2N7002/RoHS
R135
TPPW
0603/1K/1%/RoHS R136
1 TST_PGI
2
Do Not Stuff 0603/1K/1%/RoHS
2
C115 R138 RBSW
RESET_N Do Not Stuff
U11 R139
1
OES0
0603/1K/1%/RoHS
R137
5 1 0603/10K/5%/RoHS
CD OUT R140
OEPW1
0603/1K/1%/RoHS
2
C116
0603/100n/25V/7/RoHS 4 NC
VDD
VSS 3
R141
Do NotCNTP
Stuff ViewSonic Corporation
R142
MTSIDE
Do Not Stuff
S-80927CNMC/RoHS
V33T
R143
Model A190A1-H-C 6bit RSDS (TCON)
IDREV
GND Do Not Stuff
GND
Title
Date Rev:

60
VCPU
VCPU
5
6
7
8
6
5
7
8
RP1 RP2
0603*4/10K/5%/RoHS 0603*4/10K/5%/RoHS
4
3
2
1
4
2
1
3
Bead Array LP8,LP9,LP11=>modified RoHs
CN3
LP6 1 8 BK32164M121
MENU 15
KEY_DOWN 2 7 14
KEY_UP 3 6 13
SOURCE_SELECT 4 5 12
LP7 1 8 BK32164M121
AUTO_ADJ 11
LED_O 2 7
LED_B 10
3 6 9
PWR_SW 4 5 8
L4 7
6
AUDIOR- 1 2 5
MPZ1608S221/RoHS 4
3
L5 2
1
3
2
4
3
1
2
VCPU 1
AUDIOR+ 1 2
VCPU
CP7 CP8 MPZ1608S221/RoHS HEADER 10_2/RoHS
0603*4/100p/50V/PbF 0603*4/100p/50V/PbF
L6
R77
R76 1 2
8
7
5
6
8
5
6
7
AUDIOL-
0603/10K/5%/RoHS R78 Do Not Stuff GND
MPZ1608S221/RoHS
L7
2
1 0603/0R/5%/RoHS 1 2
TP0610K/PbF AUDIOL+
Q13
Q12 MPZ1608S221/RoHS
1 LED_OR
Do Not Stuff
3
C30
R79 Do Not Stuff
0603/249R/1%/RoHS GND
GND GND
LED_O
VCPU VCPU
R81
R80 Do Not Stuff
0603/10K/5%/RoHS R82
2
1 0603/0R/5%/RoHS
TP0610K/PbF Q15
Q14 1
Do Not Stuff LED_BL
3
R83 C31
0603/249R/1%/RoHS Do Not Stuff
GND GND
LED_B
Model OSD & AUDIO
Title
Date Rev:

61
VCPU
R29 0603/10K/5%/RoHS
R30 R31
BZT52C3V6S-F/RoHS Do Not Stuff

R173 R174R175 R176 Do Not Stuff VCPU1
SDA
2
VCPU 1
0603/10K/5%/RoHS R34 0603/560R/5%/RoHS SCL
R32 R33 C19 0603/10K/5%/RoHS CSZ
HWRESET
0603/10K/5%/RoHS ZDP1 1206/10u/16V/X/PbF 0603/10K/5%/RoHS R35 0603/0R/5%/RoHS
44
U2 0603/10K/5%/RoHS
0603/10K/5%/RoHS C20 0603/22p/50V/N/RoHS
1
C18 20 43 03/08/04
VCC
1206/10u/16V/X//PbF X2 P1.0/ET2 C21 Avoid entering the
P1.1 42
Y1 R36 41 0603/100n/25V/Y/RoHS self-test mode of the
D14 24MHz/RoHS 0603/1M/5%/RoHS P1.2 MCU.
P1.3 40
1N4148WS-F/PbF 39
P1.4 AD0 1N4148WS/RoHS
1 2 21 38 GND
C22 0603/22p/50V/N/RoHS X1 P1.5 AD1
GND
P1.6 37
AD2 D15 1N4148WS/RoHS
R37 0603/10K/5%/RoHS 10 36 1N4148WS/RoHS
RST P1.7 AD3
V5A Q6
R38 0603/0R/5%/RoHS VCPU DVI_5V
CLK_DDC 11 HSCL1/P3.0/RXDO 31
R39 0603/0R/5%/RoHS P6.7 3 2
GND DAT_DDC 13 3 V5A DDCCI_5V
HSDA1/P3.1/TXDO DA1/P5.1 V5A D16 D17 VGA_5V
14 P3.2/INT0 4
INT DA2/P5.2 R40 R41 SST3906F/PbF
SDA1 16 DA3/P5.3 5 1N4148WS/RoHS V5A
ISDA/P3.4/T0 0603/10K/5%/RoHS/OPEN Do Not Stuff R42 D33
SCL1 17 6
1
ISCL/P3.5/T1 DA4/P5.4 0603/7.5K/5%/RoHS
DA5/P5.5 7
C24 18 15 R43
P7.6 P3.3/INT1 0603/2K/5%/RoHS
23 NC VCPU
C23 VCPU R44
19 AD0/P6.0 24 5V_ON/OFF
Do Not Stuff P7.7/CLKO2 3
1 25 GND 0603/4.7K/5%/RoHS
NC AD1/P6.1 Q7 R46
12 NC 26
AD2/P6.2 TST_PGI 1
33 NC 27 5V_ON/OFF
AD3/P6.3 R45 MMBT3904-F/RoHS
GND 34 28 0603/1K/5%/RoHS
VCPU NC P6.4 0603/10K/5%/RoHS V33A
35 NC P6.5 29
R47 DVI_CLK 8 30 2 DDCCI_SEL
Do Not Stuff P5.6/HSCL2 CLKO1/P6.6 V33A
DDCCI_SEL 9 DA0/P5.0 2
R48 Do Not Stuff P5.7/HSDA2 L3
GND
3
VSS
Do Not Stuff QP1 32 GND BK1608LL121/RoHS R180

C25 VSYNC Do Not Stuff
Q8
R49 1 MTV512MV64/RoHS
22
DSUB_DET Do Not Stuff VCPU

MTV512M 3 2
2
Do Not Stuff DVI_CLK

GND SST3906F/PbF
Avoid entering the R56
1
self-test mode of the GND 0603/4.7K/5%/RoHS VCPU
MCU. R50
MENU
PWR_SW VCM_PWM KEY_DOWN 0603/10K/5%/RoHS
VCPU KEY_UP R52 R53R54 R55 R59 0603/0R/5%/RoHS VCPU
AUD_DET SOURCE_SELECT 0603/4.7K/5%/RoHS R61 0603/0R/5%/RoHS
AUTO_ADJ 0603/4.7K/5%/RoHS
R51 LED_BL AUDIO_ON 0603/10K/5%/RoHS
0603/4.7K/5%/RoHS LED_OR 0603/10K/5%/RoHS R178 R58
GND
0603/100R/5%/RoHS R179 Do Not Stuff Do Not Stuff
0603/100R/5%/RoHS0603/0R/5%/RoHS I1
INV_ON/OFF R57 0603/0R/5%/RoHS R60
3 1B 1A 2 DAT_DDC
DCC2_DAT R63 6 2B 2A 5 CLK_DDC
DCC2_CLK
DDC_CLK 8 3B 3A 9
3
11 12 Q9
DDC_DAT 4B 4A
1OE 1 1
VCPU 4
2
VCPU 2OE Do Not Stuff
DDCCI_5V 14 VCC 3OE 10
R67 0603/10K/5%/RoHS C26 7 13
R66 0603/10K/5%/RoHS GND 4OE
Do Not Stuff
Do Not Stuff
R69
R68 0603/10K/5%/RoHS
0603/10K/5%/RoHS DCDC_ON/OFF PANEL_ON/OFF
3
R71
3
1 C28 VCPU
R70 C27 0603/100n/25V/X/RoHS
1 0603/100n/25V/X/RoHS0603/4.7K/5%/RoHS
0603/4.7K/5%/RoHS Q11 VCPU R72 0603/10K/5%/RoHS
2
Q10 SST3904F/PbF CN5

U3
2
SST3904F/PbF
1 R73 0603/10K/5%/RoHS
8 VCC 1
DAT_DDC 2 A0
GND CLK_DDC 7 WP A1 2 C29
3 R74 0603/100R/5%/RoHS
6 SCL 3
GND SCL1 R75 0603/100R/5%/RoHS A2 0603/100n/25V/X/RoHS
4 5 SDA 4
SDA1 GND
Do Not Stuff
GND AT24C16AN/RoHS
GND
Model MCU
Title
Date Rev:

62
VCC1
VCC 1
CN2
XAO1
36 36
XAO 1 35 35
FSTH 34 34
FB2P 33 33
FB2N 32 32
STV1
FB1P 31 31
STV 1 30
FB1N 30
FB0P 29 29
FB0N 28 28
27 27
FG2P 26 26
CPV1
FG2N 25 25
CPV 1 24
FG1P 24
FG1N 23 23
FG0P 22 22
FG0N 21 21
20 20
OE1
FCKP 19 19
OE 1 18
FCKN 18
17 17
STB 16 16
POL 15 15
STB1
14 14
STB 1 13
FR2P 13
FR2N 12 12
FR1P 11 11
POL1 FR1N 10 10
FR0P 9 9
POL 1 8
FR0N 8
7 7
V33P 6
OE 6
CPV 5 5
GND 4
PANEL_ON/OFF1 STV XAO 4
3 3
PANEL_ON/OFF 1 L8 FBMJ2125HS420/PbF 2
VCC 2
V33P 1 1
IL-FHR-F36S-HF/RoHS
DCDC_ON/OFF1 C32
DCDC_ON/OFF 1 0603/100n/25V/X/RoHS
GND
VCM_PWM1 Do Not Stuff
VCM_PWM 1 XAOI XAO
XAOI R177
CN1
36 36
35 35
GVON1
BB2P 34 34
GVON 1 BB2N 33 33
BB1P 32 32
BB1N 31 31
BB0P 30 30
GVOFF1
BB0N 29 29
GVOFF 1 28 28
BG2P 27 27
BG2N 26 26
BG1P 25 25
BG1N 24 24
FSTH1
BG0P 23 23
FSTH 1 BG0N 22 22
21 21
20 20
BSTH1 BCKP
19 19
BCKN
18 18
BSTH 1 BR2P 17 17
BR2N 16 16
BR1P 15 15
BR1N 14 14
BR0P 13 13
BR0N 12 12
11 11
BSTH 10 10
9 9
8 8
GVON
7 7
V5A GVOFF
6 6
GND VCM_PWM
DCDC_ON/OFF 5 5
PANEL_ON/OFF 4
PANEL_ON/OFF 4
V5A 3 3
2 2
1 1
IL-FHR-F36S-HF/RoHS
C33 C34
1206/22u/16V/Y/RoHS 0603/100n/25V/7/RoHS
V12A
GND
V12A
C35
1206/4.7u/35V/Y/E
C36 ViewSonic Corporation
Model PANEL I/F
0603/100n/25V/X/RoHS
GND Title
Date Rev:

63
V5A_ESD
V5A_ESD
CON1
DCC2_CLK
DCC2_CLK
R 25
26 DCC2_DAT
G DCC2_DAT
B 27
RGB GND 29
28 R1 Do Not Stuff
HSYNC DCC2_CLK
VSYNC 8
15 R2 Do Not Stuff
SYNC GND DCC2_DAT
DDC SCL 6
7 DVI_5V
DDC SDA
+5V 14 1 2 L1 DVI_5V
DVI_5V
HPD 16
R3 BK1608LL121/RoHS
1/3shield 11
3 V5A
2/4shield 0603/10K/5%/RoHS
0/5shield 19 V5A
clk shield 22
2
1
For MTV512 D4
2
18 Do Not Stuff
DAT0+ C2
DAT0- 17
10 C1 R5 R6
3
DAT1+ D1 D2 D3 0603/100n/25V/Y/RoHS U1 Do Not Stuff Do Not Stuff
DAT1- 9
2 UDZSF-5.6B/PbF 1 8 R4 Do Not Stuff
1
1
DAT2+ NC VCC R7 Do Not Stuff Do Not Stuff
DAT2- 1 2 NC VCLK 7
13 UDZSF-5.6B/PbF 3 6
DAT3+ UDZSF-5.6B/PbF NC SCL
DAT3- 12 4 GND SDA 5
DAT4+ 5
4 Do Not Stuff
DAT4- 0603/10R/5%/RoHS GND
DAT5+ 21 GND
20 R8
DAT5- R9 0603/10R/5%/RoHS R+
clk+ 23 R-
24 R10 0603/10R/5%/RoHS
clk- G+
R11 0603/10R/5%/RoHS
G-
R12 0603/10R/5%/RoHS
2DS-0342-001/RoHS R13 0603/10R/5%/RoHS B+
B-
R14 0603/10R/5%/RoHS
CLK+
GND D5 D6 D7 D8 D9 D10 D11R15 0603/10R/5%/RoHS
CLK-
3
3
3
3
3
3
BAV99W/RoHS BAV99W/RoHS BAV99W/RoHS BAV99W/RoHS D12
BAV99W/RoHS BAV99W/RoHSBAV99W/RoHS BAV99W/RoHS
1 1 1 1 1 1 1 1
L2
C3 C4 C5 C6 C7 C8 C9 C10
V5A 0603/0R/5%/RoHS V5A_ESD
2
2
2
2
0603/100n/25V/7 0603/100n/25V/7 0603/100n/25V/7 0603/100n/25V/7 0603/100n/25V/7 0603/100n/25V/7 0603/100n/25V/7 0603/100n/25V/7

Label10603
D13
C11 Do Not Stuff
1206/10u/16V/5/RoHS
1
GND
Model DVI INTERFACE
GND Title
Date Rev:

64
R144
Do Not Stuff
11 1 0603/0R/5%/RoHS
DDC_DAT
6 R145 0603/68R/1%/RoHS R146 C117 0603/47n/16V/7/RoHS
0603/0R/5%/RoHS RIN
12 2
7 R147 0603/68R/1%/RoHS R148 C118 0603/47n/16V/7/RoHS
GIN
13 3 0603/0R/5%/RoHS
8 R149 0603/68R/1%/RoHS R150 C119 0603/47n/16V/7/RoHS
BIN
14 4
9 R152 Do Not Stuff C120 Do Not Stuff
SOG
15 5
10 C121 C122 C123
R151 R153 R154
CN6 0603/75R/5%/RoHS Do Not Stuff Do Not Stuff Do Not Stuff
2DS-D112-002 0603/75R/5%/RoHS
0603/75R/5%/RoHS R155 0603/51R/1%/RoHS C124 0603/47n/16V/7/RoHS

GNDR
R156 0603/51R/1%/RoHS C125 0603/47n/16V/7/RoHS
GNDG
GND R158 0603/51R/1%/RoHS C126 0603/47n/16V/7/RoHS
GNDB
3
R157
3
3
Do Not Stuff 1
D21 D22 D23 1 1
BAV99W/RoHS D24 D25
Do Not Stuff BAV99W/RoHS BAV99W/RoHS
Do Not Stuff
DDC_CLK V5A_ESD GND
2
V5A_ESD
2
GND C127 C128 C129
0603/100n/25V/X/RoHS 0603/100n/25V/X/RoHS 0603/100n/25V/X/RoHS
GND
R159 0603/0R/5%/RoHS R160
2
HSYNC
D26 0603/680R/1%/RoHS
UDZSF-5.6B/PbF R161 C130
0603/2.2K/5%/RoHS 0603/33p/50V/N/RoHS
1
GND
GND GND
R162 0603/0R/5%/RoHS R164
VSI 2 VSYNC
1 DSUB_DET
D27 0603/100R/5%/RoHS DSUB_DET1 TP
UDZSF-5.6B/PbF R163 C131
0603/2.2K/5%/RoHS 0603/33p/50V/N/RoHS Do Not Stuff
1 HSYNC
HSYNC1 TP
1
GND Do Not
1 Stuff VSYNC
VSYNC1 TP
GND GND Do Not Stuff
R165 0603/100R/5%/RoHS
DDC_CLK
R166 0603/100R/5%/RoHS VGA_5V VGA_5V
DDC_DAT
R167 DSUB_DET
DSUB_DET
0603/100R/5%/RoHS
L19 R168
BK1608LL121/PbF 0603/10R/5%/RoHS V5A
VGA_5V
V5A
D30
2
D29
1
D28 0603220KV05T/RoHS 0603220KV05T/RoHS D32 R169 Do Not Stuff C133

0603220KV05T/RoHS
2
Do Not Stuff Do Not Stuff

C132 D31 R170 Do Not Stuff
0603/100n/25V/X/RoHS BZT52-C5V6S/RoHS
1
R171 Do Not Stuff GND

3
U12
1 VCC 8
NC
2 NC VCLK 7 R172
3 6 VGA_5V GND
NC SCL Do Not Stuff
GND 4 GND SDA 5
Do Not Stuff
GND
Model VGA
Title
Date Rev:

65
11. PCB Layout Diagrams

66
* Reader’s Response*
Dear Readers:
Thank you in advance for your feedback on our Service Manual, which allows continuous improvement
of our products. We would appreciate your completion of the Assessment Matrix below, for return to
ViewSonic Corporation.
Assessment
A. What do you think about the content of this Service Manual?
Unit Excellent Good Fair Bad
1. Precautions and Safety Notices
2. Specification
3. Front Panel Function Control Description
4. Circuit Description
5. Adjustment Procedure
6. Troubleshooting Flow Chart
7. Recommended Spare Parts List
8. Exploded Diagram and Exploded Parts List
9. Block Diagrams
10. Schematic Diagrams
11.PCB Layout Diagrams
B. Are you satisfied with this Service Manual?

Item Excellent Good Fair Bad
1. Service Manual Content
2. Service Manual Layout
3. The form and listing
C. Do you have any other opinions or suggestions regarding this service manual?
Reader’s basic dada:

Name: Title:
Company:
Add:
Tel: Fax:
E-mail:
After completing this form, please return it to ViewSonic Quality Assurance in the USA at facsimile
1-909-839-7943. You may also e-mail any suggestions to the Director, Quality Systems & Processes
([email protected])

67

VA1912 W

Uploaded by

Copyright:

Available Formats

VA1912 W

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

VA1912 W

Uploaded by

Copyright:

Available Formats

Service Manual

(VA1912W/Wb_SM Rev. 1a Oct. 2005)

ViewSonic Corporation Confidential - Do Not Copy VA1912W/Wb

1. Precautions and Safety Notices 1

3. Front Panel Function Control Description 9

7. Recommended Spare Parts List 48

8. Exploded Diagram and Exploded Parts List 53

11. PCB Layout Diagrams 66

ViewSonic Corporation Confidential - Do Not Copy VA1912W/Wb

ViewSonic Corporation Confidential - Do Not Copy VA1912W/Wb

ViewSonic Corporation Confidential - Do Not Copy VA1912W/Wb

ViewSonic Corporation Confidential - Do Not Copy VA1912W/Wb

OSD Control [; X] [ 1 ] [▼] [▲] [ 2 ] [ ] Yes

451 x 391 x 197 (mm)

2.2 GENERAL specification

Test Resolution & Frequency 1440 x 900 @ 60Hz

ViewSonic Corporation Confidential - Do Not Copy VA1912W/Wb

Analog Input Connector DB-15 (Analog), refer the appendix A

2.4 POWER SUPPLY

Power Supply (power build-in) CMO Part Number: 27-D003247

ViewSonic Corporation Confidential - Do Not Copy VA1912W/Wb

2.5 ELECTRICAL REQUIREMENT

Horizontal / Vertical Frequency

ViewSonic Corporation Confidential - Do Not Copy VA1912W/Wb

Front Panel Hardware Controls

Note: Power Button, Button 1 and Button 2 and Mute

Short Cuts Function from the button(s)

ViewSonic Corporation Confidential - Do Not Copy VA1912W/Wb

2.7 AUDIO INTERFACE (SPEAKER SPECIFICATION)

Line input connection 3.5 mm stereo jack

ViewSonic Corporation Confidential - Do Not Copy VA1912W/Wb

Adjusting the Screen Image

Front Control Panel

Displays the Main Menu or Scrolls through menu options and

Displays the control screen

Audio Mute Power light

ViewSonic Corporation Confidential - Do Not Copy VA1912W/Wb

. (The black border around the edge of the screen should

ViewSonic Corporation Confidential - Do Not Copy VA1912W/Wb

Brightness adjusts background black level of the screen image.

5400K-Adds green to the screen image for a darker color.

ViewSonic Corporation Confidential - Do Not Copy VA1912W/Wb

Manual Image Adjust Sub-menu

H. Size (Horizontal Size) adjusts the width of the screen image.

H./V. Position (Horizontal/Vertical Position) moves the screen image left or

ViewSonic Corporation Confidential - Do Not Copy VA1912W/Wb

Sharpness adjusts the clarity and focus of the screen image.

Setup Menu displays the menu shown below:

Resolution Notice allows the user to enable or disable this notice.

ViewSonic Corporation Confidential - Do Not Copy VA1912W/Wb

ViewSonic Corporation Confidential - Do Not Copy VA1912W/Wb

1. LCD Integrated Power System (LIPS)

ViewSonic Corporation Confidential - Do Not Copy VA1912W/Wb

Data Output RSDS Output data

ViewSonic Corporation Confidential - Do Not Copy VA1912W/Wb

A. Function Test and Alignment Procedure

1. All Modes Reset

2. Auto Image Adjust

5 Window Shut Down