Data sheet 3RV2011-4AA15

Circuit breaker size S00 for motor protection, CLASS 10 A-release

10...16 A N-release 208 A screw terminal Standard switching
capacity with transverse auxiliary switches 1 NO+1 NC

Product brand name SIRIUS

Product designation Circuit breaker
Design of the product For motor protection
Product type designation 3RV2

General technical data

Size of the circuit-breaker S00
Size of contactor can be combined company-specific S00, S0
Product extension
● Auxiliary switch Yes
Power loss [W] for rated value of the current
● at AC in hot operating state 9.25 W
● at AC in hot operating state per pole 3.1 W
Insulation voltage with degree of pollution 3 at AC 690 V
rated value
Surge voltage resistance rated value 6 kV
maximum permissible voltage for safe isolation
● in networks with grounded star point between 400 V
main and auxiliary circuit

3RV2011-4AA15 Subject to change without notice

Page 1/10 08/10/2020 © Copyright Siemens
 ● in networks with grounded star point between 400 V
main and auxiliary circuit
Protection class IP
● on the front IP20
● of the terminal IP20
Shock resistance
● acc. to IEC 60068-2-27 25g / 11 ms
Mechanical service life (switching cycles)
● of the main contacts typical 100 000
● of auxiliary contacts typical 100 000
Electrical endurance (switching cycles)
● typical 100 000
Type of protection according to ATEX directive Ex II (2) GD
2014/34/EU
Certificate of suitability according to ATEX directive DMT 02 ATEX F 001
2014/34/EU
Reference code acc. to DIN EN 81346-2 Q

Ambient conditions
Installation altitude at height above sea level
● maximum 2 000 m
Ambient temperature
● during operation -20 ... +60 °C
● during storage -50 ... +80 °C
● during transport -50 ... +80 °C
Temperature compensation -20 ... +60 °C
Relative humidity during operation 10 ... 95 %

Main circuit
Number of poles for main current circuit 3
adjustable pick-up value current of the current- 10 ... 16 A
dependent overload release
Operating voltage
● rated value 690 V
● at AC-3 rated value maximum 690 V
Operating frequency rated value 50 ... 60 Hz
Operating current rated value 16 A
Operating current
● at AC-3
— at 400 V rated value 16 A
Operating power
● at AC-3
— at 230 V rated value 4 000 W
— at 400 V rated value 7 500 W

3RV2011-4AA15 Subject to change without notice

Page 2/10 08/10/2020 © Copyright Siemens
 — at 500 V rated value 7 500 W
— at 690 V rated value 11 000 W
Operating frequency
● at AC-3 maximum 15 1/h

Auxiliary circuit
Design of the auxiliary switch transverse
Number of NC contacts for auxiliary contacts 1
Number of NO contacts for auxiliary contacts 1
Number of CO contacts
● for auxiliary contacts 0
Operating current of auxiliary contacts at AC-15
● at 24 V 2 A
● at 120 V 0.5 A
● at 125 V 0.5 A
● at 230 V 0.5 A
Operating current of auxiliary contacts at DC-13
● at 24 V 1 A
● at 60 V 0.15 A

Protective and monitoring functions

Product function
● Ground fault detection No
● Phase failure detection Yes
Trip class CLASS 10
Design of the overload release thermal
Operational short-circuit current breaking capacity
(Ics) at AC
● at 240 V rated value 100 kA
● at 400 V rated value 30 kA
● at 500 V rated value 5 kA
● at 690 V rated value 2 kA
Maximum short-circuit current breaking capacity (Icu)
● at AC at 240 V rated value 100 kA
● at AC at 400 V rated value 55 kA
● at AC at 500 V rated value 10 kA
● at AC at 690 V rated value 4 kA
Response value current
● of instantaneous short-circuit trip unit 208 A

UL/CSA ratings
Full-load current (FLA) for three-phase AC motor
● at 480 V rated value 16 A
● at 600 V rated value 16 A

3RV2011-4AA15 Subject to change without notice

Page 3/10 08/10/2020 © Copyright Siemens
 Yielded mechanical performance [hp]
● for single-phase AC motor
— at 110/120 V rated value 1 hp
— at 230 V rated value 2 hp
● for three-phase AC motor
— at 200/208 V rated value 3 hp
— at 220/230 V rated value 5 hp
— at 460/480 V rated value 10 hp
Contact rating of auxiliary contacts according to UL C300 / R300

Short-circuit protection
Product function Short circuit protection Yes
Design of the short-circuit trip magnetic
Design of the fuse link
● for short-circuit protection of the auxiliary switch Fuse gL/gG: 10 A, miniature circuit breaker C 6 A (short-circuit
required current Ik < 400 A)
Design of the fuse link for IT network for short-circuit
protection of the main circuit
● at 240 V gL/gG 80 A
● at 400 V gL/gG 63 A
● at 500 V gL/gG 50 A
● at 690 V gL/gG 40 A

Installation/ mounting/ dimensions

Mounting position any
Mounting type screw and snap-on mounting onto 35 mm standard mounting rail
according to DIN EN 60715
Height 97 mm
Width 45 mm
Depth 97 mm
Required spacing
● for grounded parts at 400 V
— downwards 30 mm
— upwards 30 mm
— Backwards 0 mm
— at the side 9 mm
— forwards 0 mm
● for live parts at 400 V
— downwards 30 mm
— upwards 30 mm
— Backwards 0 mm
— at the side 9 mm
— forwards 0 mm
● for grounded parts at 500 V

3RV2011-4AA15 Subject to change without notice

Page 4/10 08/10/2020 © Copyright Siemens
 — downwards 30 mm
— upwards 30 mm
— Backwards 0 mm
— at the side 9 mm
— forwards 0 mm
● for live parts at 500 V
— downwards 30 mm
— upwards 30 mm
— Backwards 0 mm
— at the side 9 mm
— forwards 0 mm
● for grounded parts at 690 V
— downwards 50 mm
— upwards 50 mm
— Backwards 0 mm
— at the side 30 mm
— forwards 0 mm
● for live parts at 690 V
— downwards 50 mm
— upwards 50 mm
— Backwards 0 mm
— at the side 30 mm

Connections/ Terminals
Product function
● removable terminal for auxiliary and control No
circuit
Type of electrical connection
● for main current circuit screw-type terminals
● for auxiliary and control current circuit screw-type terminals
Arrangement of electrical connectors for main current Top and bottom
circuit
Type of connectable conductor cross-sections
● for main contacts
— single or multi-stranded 2x (0,75 ... 2,5 mm²), 2x 4 mm²
— finely stranded with core end processing 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
● at AWG conductors for main contacts 2x (18 ... 14), 2x 12
Type of connectable conductor cross-sections
● for auxiliary contacts
— single or multi-stranded 2x (0,5 ... 1,5 mm²), 2x (0,75 ... 2,5 mm²)
— finely stranded with core end processing 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
● at AWG conductors for auxiliary contacts 2x (20 ... 16), 2x (18 ... 14)

3RV2011-4AA15 Subject to change without notice

Page 5/10 08/10/2020 © Copyright Siemens
 Tightening torque
● for main contacts with screw-type terminals 0.8 ... 1.2 N·m
● for auxiliary contacts with screw-type terminals 0.8 ... 1.2 N·m
Design of screwdriver shaft Diameter 5 to 6 mm
Size of the screwdriver tip Pozidriv 2
Design of the thread of the connection screw
● for main contacts M3
● of the auxiliary and control contacts M3

Safety related data

B10 value
● with high demand rate acc. to SN 31920 5 000
Proportion of dangerous failures
● with low demand rate acc. to SN 31920 50 %
● with high demand rate acc. to SN 31920 50 %
Failure rate [FIT]
● with low demand rate acc. to SN 31920 50 FIT
T1 value for proof test interval or service life acc. to 10 y
IEC 61508
Display version
● for switching status Handle

Certificates/ approvals

3RV2011-4AA15 Subject to change without notice

Page 6/10 08/10/2020 © Copyright Siemens
 General Product Approval For use in haz-
ardous loca-
tions
KC

For use in haz- Declaration of Conformity Test Certificates Marine / Ship-

ardous loca- ping
tions
Miscellaneous Special Test Certi- Type Test Certific-
ficate ates/Test Report

Marine / Shipping

other Railway
Confirmation Vibration and Shock Confirmation

Further information
Information- and Downloadcenter (Catalogs, Brochures,…)
https://www.siemens.com/ic10
Industry Mall (Online ordering system)
https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RV2011-4AA15
Cax online generator
http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3RV2011-4AA15
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
https://support.industry.siemens.com/cs/ww/en/ps/3RV2011-4AA15
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...)
http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3RV2011-4AA15&lang=en
Characteristic: Tripping characteristics, I²t, Let-through current
https://support.industry.siemens.com/cs/ww/en/ps/3RV2011-4AA15/char
Further characteristics (e.g. electrical endurance, switching frequency)
http://www.automation.siemens.com/bilddb/index.aspx?view=Search&mlfb=3RV2011-4AA15&objecttype=14&gridview=view1

3RV2011-4AA15 Subject to change without notice

Page 7/10 08/10/2020 © Copyright Siemens
 96.9

45 5

49
97

3RV2011-4AA15 Subject to change without notice

Page 8/10 08/10/2020 © Copyright Siemens
3RV2011-4AA15 Subject to change without notice
Page 9/10 08/10/2020 © Copyright Siemens
 1/L1

3/L2

5/L3

13

21
-F

I> I> I>

14

22
2/T1

4/T2

6/T3

last modified: 08/07/2020

3RV2011-4AA15 Subject to change without notice

Page 10/10 08/10/2020 © Copyright Siemens