Principle of Adsorption Desiccant Air Dryer

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 3

Principle of Adsorption Desiccant Air Dryer

With drop force of bottom impact and side vibration, the manufacturer tightly fill the senior
moisture-absorption chemical raw materials-molecular (Alumina) inside both drying towers.
When the Moisture-Contained gas impacts the sorbent in a curve following specific flow
direction, the vapor water in the air will be absorbed under the pressure state. The water will
be released automatically from the sorbent with the instant pressure drop method when the
sorbent absorbs the water and saturated. Just by this characteristic, this product works
alternatively in the sequence of absorbing, releasing, regenerating and charging in the manner
of shifting between two towers.

Advantages

Characteristics of Adsorption Desiccant Air Dryer


 1. Large capacity design,ensure the outlet dew point steady, could suitable to
absorbent aging and the operating load change.
 2. Main core parts use famous brands to make sure continuous and reliable
running.
 3. Integrated unit leave factory to ensure the convenient installation.
 4. Use PIC micro treated control technology, make the equipment advanced.
       Optional:
 1. Molecular sieve
 2. Dew point swift mode
 3. High dew point warning,chain
 4. Pre-filter and after-filter could be installed
 5. LED display,matched upper computer communication interface connectors
Technical data

Specification of Adsorption Desiccant Air Dryer


 
Rated Inlet Temperature: ≤45°C
Maximum inlet temperature: ≤70°C
Inlet oil content: ≤0.1ppm
Outlet Pressure Dew Point: -40°C 
Adsorbent: Activated alumina or molecular sieve      
Rated Working Pressure:0.4~1.0MPa(1.0MPa or above is optional)
Pressure loss: 0.0021MPa
Control Model: CPU (standard configuration), PLC is optional    
Working Mode: Automatic switching between tower A and tower B, continuous working         
Regeneration Way: Heatless regenerative
Regeneration Air Consumption: 3-8%
Cycle Period: 5-10min, adjustable
Power Supply: 220V/50HZ/60hz,380v/50hz-60hz
ZKD Series heatless adsorption air dryer 

Capacity Weight Connector Voltage Dimension(mm)    


Model
(m³/min) (KG) (mm) (V) (L×W×H)

ZKD-1H 1.6 120 ZG1’’ 220V 50-60Hz 850*360*1385  

ZKD-2H 2.5 280 ZG1’’ 220V 50-60Hz 850*360*1385  

ZKD-3H 3.8 320 ZG1.5’’ 220V 50-60Hz 1010*460*1510

ZKD-6H 6.8 480 ZG1.5’’ 220V 50-60Hz 1100*515*1897

ZKD-8H 8.5 540 ZG2’’ 220V 50-60Hz 1200*820*1889

ZKD-10H 11.5 650 ZG2’’ 220V 50-60Hz 1200*830*2086

ZKD-13H 13.5 690 ZG2’’ 220V 50-60Hz 1300*825*2122

ZKD-15H 17 780 DN65 220V 50-60Hz   1300*825*2122

ZKD-20H 23 920 DN80 220V 50-60Hz 1450*870*2266

ZKD-25H 27 1050 DN80 220V 50-60Hz 1450*870*2516

ZKD-30H 34 1200 DN100 220V 50-60Hz 1700*1050*2523

ZKD-40H 45 1530 DN100 220V 50-60Hz 1950*1158*2700

You might also like