Introduction:Fundamental concepts of

metal forming technology

 Table of Contents

1. Definitions and classification of Metal forming processes.......................................................... 3

1.1 Introduction:.......................................................................................................................... 3
1.2 Metal forming – definition: ................................................................................................... 4
1.3 Classification of forming: ....................................................................................................... 6
1.4 Brief description of forming operations ................................................................................ 7
1.4.1 Bulk forming processes: ................................................................................................. 7
1.4. 2 Sheet metal operations: .............................................................................................. 10

Page 2 of 12
1. Definitions and classification of Metal forming processes

1.1 Introduction:
Metal forming is a very important manufacturing operation. It enjoys industrial
importance among various production operations due to its advantages such as cost
effectiveness, enhanced mechanical properties, flexible operations, higher productivity,
considerable material saving.

The objects and articles that we use in our daily life are man-made, engineered parts,
which are obtained from some raw material through some manufacturing process. All
these objects are made of a number of small components assembled into finished
product. The pen that we use for writing, for example is made of several small parts,
assembled together. An automobile is supposed to be an assembly of more than 15000
parts, produced through various manufacturing operations.

Manufacturing of finished parts and components from raw materials is one of the most
important steps in production.

Production encompasses all types of manufacturing processes. Manufacturing refers to

the conversion of raw materials into finished products employing suitable techniques.
There are several methods of manufacturing such as metal casting, metal forming,
metal machining, metaljoining and finishing.

Some of the modern methods of manufacturing include micro machining, nano

fabrication, ultra precision manufacturing etc.

In order to fulfill the requirements of the ever-increasing demands of various types of

industries, the manufacturing engineer has to choose the right type of material and the
right type of equipment for manufacture so that the cost of production and the energy
consumption are minimum.

The selection of suitable manufacturing process should also include concerns for
environmental impacts such as air pollution, waste disposal etc.

Page 3 of 12
Modern concepts such as lean manufacturing, adaptive control, agile manufacturing,
group technology etc have considerable influence on cost reduction and quality
improvements of products.

Computers and robots play important role in modern manufacturing techniques, today.
Modeling and simulation of the process prior to mass production helps the
manufacturing engineer fix up the best operating parameters and hence achieve the
finished product to the utmost level of quality and cost-effectiveness.

The present course is focused on one of the important methods of manufacturing,

namely, metal forming.

1.2 Metal forming – definition:

Materials are converted into finished products though different manufacturing
processes. Manufacturing processes are classified into shaping [casting], forming,
joining, and coating, dividing, machining and modifying material property.

Fig.1.2.1: Various manufacturing operations on materials

Page 4 of 12
Of these manufacturing processes, forming is a widely used process which finds applications in
automotive, aerospace, defense and other industries.

Wrought forms of materials are produced through bulk or sheet forming operations. Cast
products are made through shaping – molding and casting.

A typical automobile uses formed parts such as wheel rims, car body, valves, rolled shapes for
chassis, stamped oil pan, etc.

In our daily life we use innumerable formed products e.g. cooking vessels, tooth paste
containers, bicycle body, chains, tube fitting, fan blades etc.

Forming is the process of obtaining the required shape and size on the raw material by
subjecting the material to plastic deformation through the application of tensile force,
compressive force, bending or shear force or combinations of these forces.

Page 5 of 12
1.3 Classification of forming:

Fig. 1.3.1: Classification of metal forming processes

Typically, metal forming processes can be classified into two broad groups. One is bulk
forming and the other is sheet metal forming. Bulk deformation refers to the use of raw
materials for forming which have low surface area to volume ratio. Rolling, forging,
extrusion and drawing are bulk forming processes. In bulk deformation processing
methods, the nature of force applied may be compressive, compressive and tensile,
shear or a combination of these forces.

Bulk forming is accomplished in forming presses with the help of a set of tool and die.
Examples for products produced by bulk forming are: gears, bushed, valves, engine parts
such as valves, connecting rods, hydraulic valves, etc.

Sheet metal forming involves application of tensile or shear forces predominantly.

Working upon sheets, plates and strips mainly constitutes sheet forming. Sheet metal
operations are mostly carried out in presses – hydraulic or pneumatic. A set of tools

Page 6 of 12
called die and punch are used for the sheet working operations. Bending, drawing,
shearing, blanking, punching are some of the sheet metal operations.

A new class of forming process called powder forming is gaining importance due to its
unique capabilities. One of the important merits of powder forming is its ability to
produce parts very near to final dimensions with minimum material wastage. It is called
near-net-shape forming. Material compositions can be adjusted to suit the desirable
mechanical properties. Formability of sintered metals is greater than conventional
wrought materials. However, the challenge in powder forming continues to be the
complete elimination or near-complete elimination of porosity. Porosity reduces the
strength, ductility and corrosion resistance and enhances the risk of premature failure of
components.

Based on the nature of deformation force applied on the material, during forming,
metal forming processes are also classified into several types as shown below:

Forming by Tensile and Forming under Bending and shearing

compressive stress compressive stresses Tensile stress stresses
•Open Die Forging •Deep drawing •Stretch forming •Bending
•Closed Die Forging •Spinning •Stretching •Shearing
•Rolling •Stripping •Expanding •Punching
•Coining •Wrinkle bulging •Blanking
•Extrusion

Forming is also classified as cold forming, hot forming or warm forming. Hot forming is
the deformation carried out at temperatures above recrystallization temperatures.
Typically, recrystallization temperatures for materials ranges from 0.5 Tm to 0.8 Tm,
where Tm is melting temperature of material.

1.4 Brief description of forming operations

We discuss briefly the various forming operations in the following sections.

1.4.1 Bulk forming processes:

Rolling is a compressive deformation process, which is used for producing semi-finished
products such as bars, sheets, plates and finished products such as angles, channels,
sections.Rolling can be carried out both in hot and cold conditions.

Page 7 of 12
Fig.1.4.1.1:Rolling Process

Forging is a bulk forming process in which the work piece or billet is shaped into finished
part by the application of compressive and tensile forces with the help of a pair of tools
called die and punch. Forging can be done in open dies or closed dies. Open die forging
is usually used for preliminary shaping of raw materials into a form suitable for
subsequent forming or machining.

Open die forgingClosed die forming

Fig.1.4.1.2: Forging processes

Open die forming is done using a pair of flat faced dies for operations such as drawing
out, thinning, etc.

Closed die forming is performed by squeezing the raw material called billet inside the
cavity formed between a pair of shaped dies. Formed products attain the shape of the
die cavity. Valve parts, pump parts, small gears, connecting rods, spanners, etc are
produced by closed die forming.

Page 8 of 12
Coining is the process of applying compressive stress on surface of the raw material in
order to impart special shapes on to the surface from the embossing punch – e.g. coins,
medallions

Fig.1.4.1.3:Direct extrusion process

Extrusion involves forcing the raw material through a narrow opening of constant cross-
section or varying cross-section in order to reduce the diameter and increase the length.
Extrusion can be done hot or cold. Extruded products include shafts, tubes, cans, cups,
gears.

Basically there are two methods of extrusion, forward and backward extrusions. In
forward extrusion the work and the extrusion punch move along the same direction. In
backward extrusion the punch moves opposite to the direction of movement of the
work piece.

Page 9 of 12
NPTEL - Mechanical Engineering - Forming

Fig.1.4.1.4:Backward extrusion or Indirect extrusion

Wire drawing process is used for producing small diameter wires from rods by reducing
their diameter and stretching their length through the application of tensile force.
Musical strings are produced by wire drawing process. Seamless tubes can be produced
by tube drawing process.

Die block

Fig.1.4.1.5:Wire Drawing

1.4. 2 Sheet metal operations:

Deep drawing is a sheet metal process the process in which a sheet metal is forced into
cup of hollow shape without altering its thickness – using tensile and compressive
forces. Complex shapes can be produced by deep drawing of blanks in stages –
redrawing, multiple draw deep drawing etc.

Page 10 of 12
Fig.1.4.2.1:Deep drawing

Hydro mechanical deep drawing uses both punch force and hydrostatic force of a
pressurized fluid for achieving the shape.

Flanges and collars are formed by flanging process.

Spinning transforms a sheet metal into a hollow shape by compressive and tensile
stresses. Spinning mandrel of given shape is used against a roll head.

Embossing imparts an impression on the work piece by means of an embossing punch.

Bending of sheets includes rotary bending, swivel bending, roll bending using rotary die.

Die bending using flat die or shaped die is used for bending of sheets, or die coining of
sheets.

Page 11 of 12
Fig.1.4.2.2:Bending and shearing

Page 12 of 12