U.P.
Pollution Control Board
CONSENT ORDER
Ref No. - Dated : 04/08/2020
100372/UPPCB/GreaterNoida(UPPCBRO)/CTO/air/GREATER
NOIDA/2020
To ,
Shri SURAJIT CHAUDHARI
M/s KALPAKAARU PROJECTS PRIVATE LIMITED
Plot No F2Site V UPSIDC, Surajpur Industrial Area Kasna,,GAUTAM BUDH NAGAR,201306
GREATER NOIDA
Sub : Consent under section 21/22 of the Air (Prevention and control of Pollution) Act, 1981 (as amended)
to M/s. KALPAKAARU PROJECTS PRIVATE LIMITED
Reference Application No. 9190023 Dated : 04/08/2020
1. With reference to the application for consent for emission of air pollutants from the plant of M/s
KALPAKAARU PROJECTS PRIVATE LIMITED. under Air Act 1981. It is being authorised for
said emissions, as per the standards, in environment, by the Board as per enclosed conditions .
2. This consent is valid for the period from 01/08/2020 to 31/07/2025 .
3. Inspite of the conditions and provisions mentioned in this consent order UP Pollution Control Board
reserves its right and powers to reconsider/amend any or all conditions under section 21 (6) of the
Air (Previntion and Controt of Pollution) Act, 1981 as amended.
This consent is being issued with the permission of competent authority .
For and on behalf of U.P. Pollution Control Board
Dr Digitally signed
by Dr Archana
Archana Dwivedi
Date: 2020.08.04
Dwivedi 15:28:41 +05'30'
Regional Officer
Enclosed : As above
(condition of consent):
Copy to: Chief Environmental Officer – 1
Regional Officer
U.P. Pollution Control Board
Dated : 04/08/2020
CONDITlONS OF CONSENT
1. This consent is valid only for the approved production capacity of Wooden Furniture.
2. This consent is valid only for products and quantity mentioned above. Industry shall obtain prior
approval before making any modification in product/ process /fuel/ plant machinery failing which
consent would be deemed void.
3(a) The maximum rate of emission of flue gas should not be more than the emission norms for the
stacks.
3(b) Air Pollution Source Details.
Air Pollution Source Details
S.No Air Polution Type of Fuel Stack No. Parameters Height
Source
1 DG Set 320 Diesel 1 Particulate 5.0 Mtr. from
KVA Matter Roof top
3(c) The emissions by various stacks into the environment should be as per the norms of the Board .
Emission Quality Details Detail
S.No Stack No Parameter Standard
1 1 Particulate Matter As per norms
4. Quantity of other pollutants should also be as per the norms prescribed by the Board/MOEF & CC/or
otherwise mandatory .
5. The equipment for air pollution control system and monitoring ,as proposed by the industry and
approved by the Board should be installed in their premises itself .
6. The modification or installation in the existing pollution control equipments should be done only by
prior approval of Board .
7. The operation of air pollution control system and maintenance be done in such a way that the
quantity of pollutants should be in accordance with the standards prescribed by the Board/MoEF &
CC/or otherwise mandatory .
8. Unit should do provisions for fugitive emissions chimney/stack as per the norms of the Board/MOEF
& CC/or otherwise mandatory .
9. The unit should submit the stack emissions monitoring report within one month from issuance of
consent order along with the point wise compliance report of the consent order . Further quarterly
monitering report should be submitted .
Specific Conditions:
1.It is NOT ALLOWED to dig BORE-WELL in the UNIT without CGWA NOC. In case of
violation, Environmental Compensation shall be imposed and legal proceedings will be initiated
against the industry.
2.Industry shall submit quarterly monitoring reports of all stacks and ambient air quality from a
certified/approved laboratory.
3.Industry shall ensure adequate plantation and green belt within its premises. Green cover shall be
in compliance of approved map from concerned Authority.
4.Industry shall comply with various Waste Management Rules as notified by MoEf & CC i.e.
Plastic Waste Management Rules, 2016, Solid Waste Management Rules, 2016, Hazardous and
Other Wastes (Management and Trans boundary) Rules, 2016, E-waste (Management) Rules, 2016,
Construction and Demolition Waste Management Rules, 2016
5.Industry shall submit annual returns as per above mentioned rules. Also, Environmental Statement
in prescribed form as per Rule 14 of Environment (Protection) Act, 1986.
6.This consent is valid only for products and quantity mentioned above. Industry shall obtain prior
approval before making any modification in product/process/fuel/plant machinery failing which
consent would be deemed void.
7.Industry shall abide by directions given by Hon'ble Supreme Court, High Court, National Green
Tribunals, Central Pollution Control Board and Uttar Pradesh Pollution Control Board for protection
and safeguard of environment from time to time.
8.Industry shall develop green belt in accordance with Government Order 07/55-02-
2018/09(writ)/2016 dated 26/02/2018 and UPPCB Office order issued vide letter no.
H16405/220/2018/02 dated 16/02/2018
9.Industry shall ensure carbon offsetting as per Government Order (Environment Department) issued
vide letter no. H17259/ 183/55-2-2018/09(writ)/2016 dated 15.03.2018.
10.Industry shall ensure compliance of CPCB Directions dated 02.07.2019 issued u/s 18(1)(b) of Air
Act, 1981 to SPCBs of NCR, regarding conversion of industrial units in NCR to PNG.
Issued with the permission of competent authority .
For and on behalf of U.P. Pollution Control
Dr
Board .
Digitally signed
by Dr Archana
Archana Dwivedi
Date: 2020.08.04
Dwivedi 15:30:23 +05'30'
Regional Officer
