Scribd Logo
Upload

Welcome to Scribd!

  • 74 views

    06 Final Drive & Tandem PDF

    Uploaded by

    Yerson Genovez Ramos
    This document provides technical specifications for an EHB13 breaker over 4 pages. It includes specifications on external dimensions, basic specifications, installation specifications, available tools, and breaking performance. The basic specifications section lists the working weight, overall length, weight of components, required oil flow, operating pressure, and more. The installation specifications section outlines gas charging pressure, pressure adjustment valve setting, hydraulic piping requirements, and acceptable hydraulic oil specifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    06 Final Drive & Tandem PDF

    Uploaded by

    Yerson Genovez Ramos
    74 views4 pages
    This document provides technical specifications for an EHB13 breaker over 4 pages. It includes specifications on external dimensions, basic specifications, installation specifications, available tools, and breaking performance. The basic specifications section lists the working weight, overall length, weight of components, required oil flow, operating pressure, and more. The installation specifications section outlines gas charging pressure, pressure adjustment valve setting, hydraulic piping requirements, and acceptable hydraulic oil specifications.

    Original Title

    06 Final Drive & Tandem.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides technical specifications for an EHB13 breaker over 4 pages. It includes specifications on external dimensions, basic specifications, installation specifications, available tools, and breaking performance. The basic specifications section lists the working weight, overall length, weight of components, required oil flow, operating pressure, and more. The installation specifications section outlines gas charging pressure, pressure adjustment valve setting, hydraulic piping requirements, and acceptable hydraulic oil specifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    74 views4 pages

    06 Final Drive & Tandem PDF

    Uploaded by

    Yerson Genovez Ramos
    This document provides technical specifications for an EHB13 breaker over 4 pages. It includes specifications on external dimensions, basic specifications, installation specifications, available tools, and breaking performance. The basic specifications section lists the working weight, overall length, weight of components, required oil flow, operating pressure, and more. The installation specifications section outlines gas charging pressure, pressure adjustment valve setting, hydraulic piping requirements, and acceptable hydraulic oil specifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    SH# EHB-T13-E1

    EHB13 Cre. Date 29 Jul, 2010


    TECHNICAL SPECIFICATIONS Rev. Date
    Page 1 of 4

    1. EXTERNAL DIMENSIONS Unit: mm

     BA: Silenced Version – Adapter Mount

    EHB13-BA

     Standard Mounting Adapter for BA version

    기술표준(영문).dot A4 (210x297mm) Everdigm Corp.


    SH# EHB-T13-E1
    EHB13 Cre. Date 29 Jul, 2010
    TECHNICAL SPECIFICATIONS Rev. Date
    Page 2 of 4

    2. BASIC SPECIFICATIONS
    Bracket Version BA

    Available Option
    2-speed control Std.
    Dust protector Opt.
    Auto-greasing kit Opt.
    Under-water operating kit Opt.

    Working Weight 1) 1017 kg


    (2,242) (lbs)

    Weight without chisel and 833 kg


    mounting adapter (1,836) (lbs)

    Overall Length 2) 2,375 mm


    (93.5) (in.)

    Weight of components
    Power-cell 473 (1,043) kg (lbs)
    Chisel (standard) 59 (130) kg (lbs)
    Mounting adapter 3) 125 (276) kg (lbs)

    Required Oil Flow 80 ~ 140 (21 ~ 37) lpm (gpm)

    Operating Pressure 140 ~ 180 (2,000~2,600) bar (psi)

    Input Power (max.) 42 kW

    Blow Frequency
    Low speed 380 ~ 700 bpm
    High speed 550 ~ 850 bpm

    Impact Energy
    Low speed 2,500 (1,845) J (ft.lbf)
    High speed 2,150 (1,586) J (ft.lbf)

    Tool (Chisel) Shank Diameter 105 (4.13) mm (in.)

    Applicable Carrier Weight


    Optimal range 12 ~ 16 (26 ~ 35) t (klbs)
    Available range 12 ~ 20 (26 ~ 44) t (klbs)

    Notes :
    1) Total weight including standard tool, standard mounting adapter and spacers but excluding hydraulic hoses,
    fittings and mounting pins.
    2) The length measured from the tool tip of the standard tool to the top of the breaker including mounting adapter.
    3) Including standard mounting adapter, fasteners and spacers (for BA version).

    기술표준(영문).dot A4 (210x297mm) Everdigm Corp.


    SH# EHB-T13-E1
    EHB13 Cre. Date 29 Jul, 2010
    TECHNICAL SPECIFICATIONS Rev. Date
    Page 3 of 4

    3. INSTALLATION SPECIFICATIONS

    Gas Charging Pressure 1)


    Back-head (Piston accumulator) 2) 15 ~ 17 (220~250) bar (psi)
    High pressure accumulator n/a bar (psi)

    Pressure Adjust Valve Setting 3)


    (Number of turns open from the full-close) 2.0 ~ 2.5 turns

    Hydraulic Piping
    Line size (min. internal diameter) 19 (3/4) mm (in.)
    Acceptable back pressure (max.) 4) 15 (220) bar (psi)

    Hose Connections of breaker


    Oil supply (IN) & return (OUT) BSP 3/4" O-Ring Boss Female
    Air (A) BSP 3/4" O-Ring Boss Female

    Pressure Relief (min.) 40 (600) + measured


    max. operating pressure

    Acceptable Hydraulic Oil


    o o
    Operating temperature 5) -20 ~ +85 (-4 ~ +185) C ( F)
    Viscosity 1000 ~ 10 cSt

    Notes :
    1) The prefill nitrogen gas pressure measured statically (breaker not operating) without down load on the tool at
    o
    the stabilized gas temperature of +20 C
    2) The recommended value at the normal operating condition (supplied oil flow, oil temperature and viscosity, etc.)
    3) The value which is set at the factory to obtain the nominal operating pressure at the middle value of oil flow and
    back-head gas pressure.
    4) The maximum allowed oil pressure at the breaker's connection point to the return line (measured statically
    without the breaker)
    5) The allowed temperature limits when using the oil of viscosity grade 46

    3 3
    4. BREAKING PERFORMANCE (per 8-hour shift) Unit : m / 8hrs (yd / 8hrs)

    Reinforced Concrete (t=30cm) 85 ~ 180 (111 ~ 235)

    Non-reinforced Concreter (t=30cm) 130 ~ 260 (170 ~ 340)

    Reducing oversize boulders 160 ~ 350 (209 ~ 458)

    Quarrying (medium hard rock) 20 ~ 40 (26 ~ 52)

    Notes :
     These figures are intended as a guideline only and varies according to the type of the material to be broken, the
    carrier's condition, the operator's skill, the place of usage, etc.

    기술표준(영문).dot A4 (210x297mm) Everdigm Corp.


    SH# EHB-T13-E1
    EHB13 Cre. Date 29 Jul, 2010
    TECHNICAL SPECIFICATIONS Rev. Date
    Page 4 of 4

    5. AVAILABLE TOOLS (CHISELS)

    Shank Diameter 105 (4.13) mm (in.)

    TYPE OF TOOL :
    Moil Wedge Moil Point Flat Wedge Flat End Wide Flat
    (Pyramid) (Conical) –Horiz. / Vert. (Blunt) Wedge
    (Cross-cut / (Asphalt Cutter)
    Inline-cut)
    1)
    Tool Diameter 100 (3.94) 105 (4.13) 105 (4.13) 105 (4.13) 105 (4.13) mm (in.)

    Tool Length 1050 (39) 1050 (39) 1050 (39) 1050 (39) 850 (33) mm (in.)

    Tool Weight 59 (130) 59 (130) 61 (135) 64 (141) 74 (163) kg (lbs)

    Tool Shape

    Notes :
    1) The diameter of the tool portion outside the breaker body

     Other special designs are also available on request.

    기술표준(영문).dot A4 (210x297mm) Everdigm Corp.

    You might also like