Scribd
Upload
107 views9 pages

Section 2 - Understating of Voltage IN Section: Guru Institute of Engineering and Technology

This document discusses the voltage input section of a MAX8731A IC. It describes the operational requirements and possible components of the voltage input section, including two MOSFETs, a MOSFET/diode, or diode/diode. It also discusses the charging section, ACIN related components, and examples of driving the MOSFET gate directly from the IC or with single/double voltage dividers. Battery connector pin details and assignments are provided.

Uploaded by

Rajendra Shahi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
107 views9 pages

Section 2 - Understating of Voltage IN Section: Guru Institute of Engineering and Technology

This document discusses the voltage input section of a MAX8731A IC. It describes the operational requirements and possible components of the voltage input section, including two MOSFETs, a MOSFET/diode, or diode/diode. It also discusses the charging section, ACIN related components, and examples of driving the MOSFET gate directly from the IC or with single/double voltage dividers. Battery connector pin details and assignments are provided.

Uploaded by

Rajendra Shahi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 9

Guru Institute of Engineering and Technology

Section 2 – Understating of Voltage IN section


Operational Requirements for MAX8731A IC:
 DCIN
 LDO
 VCC
 REF/2
 ACIN
 ACOK

Voltage input section:


 First section to supply voltage power on MB. There are multiple names of the
adapter power supply named as VIN, DCpowersource, DCBATT, DCBatOut
approx. 10v -19v

VIN Section made of following possible components:

 2 MOSFET (either P-Channel or N-Channel)


 A MOSFET / A diode
 diode/diode
 transistor/diode

Charging Section contains followings:

 VIN = adapter section


 Communication section
 Charging section
 ACOK: Generally, 3v output through voltage divider
Guru Institute of Engineering and Technology
Guru Institute of Engineering and Technology

 It depends upon IC and charging section {high or low}


 Cases:
o IC output = low (0v)
o SIO input = high (3V)

ACIN related components:

 MOSFET gate according to channel


 Charging IC
 Voltage divider circuit
 SIO
 Series components
 DCIN
 LDO
 Impendence

VIN MOSFET Gate drive possibilities:

 Direct drive from IC


 Single voltage divider for both MOSFET
 Double voltage divider for both MOSFET

Note: please have a look each Gate drive’s sample screenshot below in schematic
view for your reference.

Sample: Direct from IC

Guru Institute of Engineering and Technology


Guru Institute of Engineering and Technology

Schematic: LA-C341P
IC: BQ24735RGRR_QFN20_3P5X3P5

Sample: Single voltage divider for both MOSFET

Guru Institute of Engineering and Technology


Guru Institute of Engineering and Technology

Schematic: LA-9104P
IC: ISL88731CHRTZ-T_QFN28_5X5~D

Guru Institute of Engineering and Technology


Guru Institute of Engineering and Technology

Battery connector pin details

01.BATT1
03.CLK_SMB
04.DAT_SMB
05.BATT_PRS
06.SYS_PRES
07.BAT_ALERT
08.GND1

1) BATT1+= Battery positive supply tentative 10-14 voltage

2) CLK_SMB Battery data communication with SIO,Battery & charging ic

approx. 3v with pullup resistor `

Guru Institute of Engineering and Technology


Guru Institute of Engineering and Technology

3) DAT_SMB = Battery data communication with SIO,Battery & charging ic

approx. 3v with pullup resistor `

4) BATT_PRS= Deliver message to SIO information of battery


present. connected with SIO .{* While remove battery form
battery connector 3v, present )
If battery attach 3 voltage pulldown or low by mosfet/tansitor or
pulldown resistor

Guru Institute of Engineering and Technology


Guru Institute of Engineering and Technology

PSID: Generally used in dell laptop for valid charger information to SIO

For hp laptop adapter ID

Guru Institute of Engineering and Technology


Guru Institute of Engineering and Technology

Assignment

Search acin origin point and final point

Batt+ origin point and relation point

Scl and sda connection and when active charging

Write the function of charging ic isl88371 pinout and voltages {input/output and

communication pin

Charging IC reading sequence

Guru Institute of Engineering and Technology


Guru Institute of Engineering and Technology

ACOFF

Guru Institute of Engineering and Technology

You might also like