TEBEVERT III MODULAR
5-25 kVA INVERTER SYSTEM
The BENNING TEBEVERT III Modular System is
designed to address the critical AC power
requirements of telecommunications and
information technology applications. The TEBEVERT
III Modular Inverter System can be scaled in 5 kVA
increments up to 25 kVA. Unlike conventional stand
alone inverters, these modules operating in parallel
can also be operated in N+1 redundant
configuration. This insures power availability for
your critical applications. A failure of one inverter
module will not effect the operation of the
remaining modules. Since all units are designed for
“hot plug” replacement, a faulty module can easily
be unplugged and replaced without disturbing
critical loads.
Key Features
NEBS Level 3 Certified
No Single Point Of Failure
Cabinet Requires No Rear Access
Automatic Master-Slave Operation
Integrated Maintenance Bypass Switch
User Friendly Display Of Operating Mode
Complies with EN 55022 Class B Requirements
Bulk DC Input or Individual DC Input per Module
High Efficiency Operation, Lowers Operating Costs
Hot Plug 5 kVA Inverter and Static Switch Modules
Less than 3% Harmonic Distortion on Output Voltage
Up to Five Inverter Modules Can Be Paralleled To Meet Load Requirements
Can Be Used With 120, 208, 220, 240, or 480VAC Commercial AC By-pass
500% Overload Capability Supports High Inrush Current Loads
Can Supply Fully Protected 120 or 120/240VAC Output
Optional—Remote Monitoring via SNMP, or HTML
Optional—Internal AC Load Distribution Circuit Breakers
Optional—Molded Case Output Circuit Breaker
Tebevert lll (R9) © Benning Power Electronics 2018 Specifications are subject to change without notice.
Technical Specifications
Maximum System Capacity 5-25 kVA (4-20 kW)
Inverter Module Rating 5 kVA (4 kW)
Maximum Modules Per System 5
Overload Capability 200% for Approx. 1.25 Seconds (Module)
Static Bypass Switch (SBS) Standard
SBS Priority Inverter or Commercial AC By-pass
SYSTEM
SBS Transfer Time <2ms
SBS Overload Capability 500% for 100ms
Overload, Modules Over Temperature, Short Circuit On Output, Low DC
SBS Transfer Criteria
Voltage, Manual Initiation, and Output AC Voltage Out Of Range
(1) Form “C” Summary Alarm; Optional Relay Card (8 Alarms), HTML and
Remote Alarming
SNMP Alarms Available
Metering Graphic Display, Power Flow diagram, and LED’s, Optional Digital Metering
On, Output Present, DC Input OK, Inverter Fault, Parallel Operation,
Indicators Overload, and Bar Graph for Output Power
AC Output Voltage 120 VAC Standard, Optional—120/240
SYSTEM OUTPUT
AC Output Current (Max) @ 120 VAC 208 A (0.8 leading), 168 A (Unity pf)
AC BYPASS &
AC Output Frequency 60Hz
Commercial AC By-pass Input Voltages Available 120 VAC Standard, Optional—208, 220, 240 or 480VAC
Load Power Factor Range 0.7 Lagging to 0.8 Leading
Output Voltage Regulation +/- 5% For All Combinations of Line, Load, and Temperature
Distortion < 3% @ 100% Rated Linear Load
DC Input Voltage 40.8 to 60VDC (48VDC nominal)
93A @54VDC (115 A max), 150A DC Input Protection Recommended/Module
INPUT
DC Input Current/Module
or 700A DC Input Protection for Bulk DC Systems Recommended
DC
DC Inrush Current Soft Start, Current Limited
Efficiency >86.5% (on-line mode) / >97% (off-line mode)
Operating Temperature Range 32˚ to +131˚F (0˚ to +55˚C)
CONDITIONS
OPERATING
Operating Humidity Range 0-95% Non-Condensing
Heat Output Per Module < 2,040 BTUs Per Hour @ 100% Load
Cooling Temperature Controlled Fans
Elevation 6000’ (1800 m)
Cabinet Dimensions 84” x 23.6” x 23.6” (2134 mm x 600 mm x 600 mm)
PHYSICAL
Cabinet Weight 765 lbs. (347 Kg) without Modules
Inverter Module Weight 77.2 lbs. (35 Kg)
Module Mounting Hot Pluggable
Safety UL60950
WORLDWIDE
STANDARDS
Design Seismic Zone 0 (Standard), NEBS Level 3— Zone 4 Optional
EMI Emissions GR-1089, EN62040-2, FCC Class A
EMI Immunity GR-1089, EN61000-4-4, EN610004-5
Electrostatic Discharge Immunity EN61000-4-2
Benning Power Electronics, Inc. Toll Free North America: 800.910.3601
1220 Presidential Dr.Richardson, TX 75081 Local: 214.553.1444
E-Mail:
[email protected] Canada: 905.997.6076
Web: www.benning.us Fax: 214.553.1355
Tebevert lll (R9) © Benning Power Electronics 2018 Specifications are subject to change without notice.
