Scribd
Upload
114 views35 pages

Lect 3 Transfer Function of Mechanical Systems

The document discusses mathematical modeling of mechanical systems, including translational and rotational systems. It describes basic elements like springs, masses, and dampers. Translational springs store potential energy proportional to deformation. Translational masses experience force according to Newton's law. Translational dampers model viscosity and drag through a damping force. Rotational systems also have analogous spring, mass, and damper elements. The steps to obtain a system's transfer function are outlined as drawing free body diagrams, writing equations of motion, and taking the Laplace transform to arrive at the transfer function. An example finds the transfer function of a translational spring-mass-damper system.

Uploaded by

Krushnasamy Suramaniyan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
114 views35 pages

Lect 3 Transfer Function of Mechanical Systems

The document discusses mathematical modeling of mechanical systems, including translational and rotational systems. It describes basic elements like springs, masses, and dampers. Translational springs store potential energy proportional to deformation. Translational masses experience force according to Newton's law. Translational dampers model viscosity and drag through a damping force. Rotational systems also have analogous spring, mass, and damper elements. The steps to obtain a system's transfer function are outlined as drawing free body diagrams, writing equations of motion, and taking the Laplace transform to arrive at the transfer function. An example finds the transfer function of a translational spring-mass-damper system.

Uploaded by

Krushnasamy Suramaniyan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 35

DSCE Bangalore

Department of Instrumentation Technology

Control Systems
Mathematical Modeling of Mechanical Systems
(Translational and Rotational Mechanical Systems)
Basic Types of Mechanical Systems
• Translational
– Linear Motion

• Rotational
– Rotational Motion

2
Basic Elements of Translational Mechanical Systems

Translational Spring
i)

Translational Mass
ii)

Translational Damper
iii)
Translational Mass
• Translational Mass is an inertia Translational Mass
element. ii)

• A mechanical system without


mass does not exist.

• If a force F is applied to a mass x(t )


and it is displaced to x meters
then the relation b/w force and F (t )
M
displacements is given by
Newton’s law.

• F=ma
Translational Damper
• When the viscosity or drag is not
negligible in a system, we often
model them with the damping
force.

• All the materials exhibit the Translational Damper


iii)
property of damping to some
extent.

• If damping in the system is not


enough then extra elements (e.g.
Dashpot) are added to increase
damping.
Common Uses of Dashpots
Door Stoppers
Vehicle Suspension

Bridge Suspension
Flyover Suspension
Translational Spring
• A translational spring is a mechanical element that
can be deformed by an external force such that the
deformation is directly proportional to the force
applied to it.

Translational Spring
i)

Circuit Symbols
Translational Spring
Translational Spring
• If F is the applied force
x1
x2

• Then x1 is the deformation if x2  0 F

• Or ( x1  x2 ) is the deformation. F

• The equation of motion is given as

F  k ( x1  x2 )
• Where k is stiffness of spring expressed in N/m
Steps to Obtain the Transfer Function
of Mechanical System.
• The mechanical system requires just one differential equation,
called the equation of motion, to describe it.
• First, draw a free-body diagram, placing on the body all forces that
act on the body either in the direction of motion or opposite to it.
• Second, use Newton’s law to form a differential equation of
motion by summing the forces and setting the sum equal to zero.
• Finally, assuming zero initial conditions, we take the Laplace
transform of the differential equation, separate the variables, and
arrive at the transfer function.
Example-1: Find the transfer function, X(s)/F(s), of the system.

Free Body Diagram (FBD)

• First step is to draw the free-body diagram.


• Place on the mass all forces felt by the mass.
• We assume the mass is traveling toward the right. Thus, only the applied force points to
the right; all other forces impede the motion and act to oppose it. Hence, the spring,
viscous damper, and the force due to acceleration point to the left.

• Second step is to write the differential equation of motion using Newton’s law to sum to
zero all of the forces shown on the mass.
Example-1: Continue.

• Third step is to take the Laplace transform, assuming zero initial conditions,

• Finally, solving for the transfer function yields

Block Diagram
Rotational Spring
Rotational Damper
Rotational Damper

You might also like