ProCash/NDC-DDC V2.

1/10
ProConsult/NDC-DDC V2.1/10

Error Mapping
Cross Reference Tables

Edition May 2011

Copyright and Trademarks

Copyright © Wincor Nixdorf GmbH 2011.

All rights, including rights of translation by printing, copying or similar methods, even of parts, are reserved.
All rights, including rights created by patent grants or registration of a utility model or design, are reserved. Delivery
subject to availability; right of technical modifications reserved.
All names of hardware and software products mentioned in this manual are trade names and/or trademarks of
their respective manufacturers.
All hardware and software names used are trademarks of their respective manufacturers.
Reliant® is a registered trademark of Pyramid Technology Corporation.
SINIX is the UNIX® System derivative of Wincor Nixdorf GmbH.
UNIX is a registered trademark in the United States and other countries, licensed exclusively through
X/Open Company Limited.
Base: OSF/Motif™, Copyright © Open Software Foundation, Inc.
X Window System™, Copyright © Massachusetts Institute of Technology.
OSF/Motif is a trademark of Open Software Foundation, Inc.
X Window System is a registered trademark of Massachusetts Institute of Technology.
MS-DOS® and Windows® are registered trademarks of Microsoft Corporation in the United States and other
countries.
Error Class Mapping

M-Status & M-Data Reference Tables

MDC Status 912/911 Reference Tables

Contents

Contents
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Error Class Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Class mapping of CSC-W32 and XFS classes . . . . . . . . . . . . . . . . . . . . . . . 5
Error mapping of XFS30 (WOSA) error events . . . . . . . . . . . . . . . . . . . . 6

M-Status & M-Data Reference Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

CSC-W32 Error Classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Cash Dispenser V1 (old series) (Class: 0007) . . . . . . . . . . . . . . . . . . . . . 8
Cash Dispenser NG (Classes: 0018/AA18/001D) . . . . . . . . . . . . . . . . . 12
CRS NG (Classes: 0018_CIN/AA18_CIN/001D_CIN) . . . . . . . . . . . . . . 25
Cash Cheque Deposit Module (Classes: 001A/XX1A) . . . . . . . . . . . . . . 33
Cash Cheque Deposit Module (Classes: 001A_CHQ) . . . . . . . . . . . . . . 50
Encryption Decryption Module (Class: 000F) . . . . . . . . . . . . . . . . . . . . . 56
Encryption Decryption Software (Class: 0011) . . . . . . . . . . . . . . . . . . . . 57
Card Reader (Class: 0008/AA08) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Deposit Module (Class: 0017/AA17) . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Vandal Guard (Class: 0015) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Motorized Door (Class: 000E) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Coin Out module (Class: 0021) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Coin In module (Class: 0022) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
P6 (P36) (Class: 0027) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Printer (Class: 0032) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Printer ND71/74/98/9A/9C/9E/TH30 (Class: 0033) . . . . . . . . . . . . . . . . 72
Printer ND75/75S/94 (Class: 0034) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Printer ND79 (Class: 0035) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Printer ND99 (Class: 0038) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Printer ND97/TH97/TP01/NP01/TP05/NP05 (Class: 0039) . . . . . . . . . . 75
SEAC Cheque Scanner (Class: 003D) . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Printer TH21 (Class: 003E) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Printer Extensions (Class: 003F) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Printer Monitor ND9G (Class: 0040) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Printer Monitor TH21 (Class: 0041) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Printer System Framework (Class: 0042) . . . . . . . . . . . . . . . . . . . . . . . . 81
Printer TP07 GDI (Class: 0044) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Printer TP07 (Class: 0045) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Printer USB/TP07 (Class: AA45) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

U25604-J-Z745-1-7600 May 2011

 Contents

Printer TP06 (Class: 0048) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Printer USB/TP06 (Class: AA48) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Printer TP13 (Class: 004A/004B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Reiner Scanner (Class: 0051) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Printer TP12 (Class: 0052) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Single Note Acceptor (SNA/JCM/WBA) (Class: 0059) . . . . . . . . . . . . . . 96
Euro Banknote Handler (EBH/RM2) (Class: 005A) . . . . . . . . . . . . . . . . . 97
EBH Cash In (EBH/RM2) (Class: 005A_CIN) . . . . . . . . . . . . . . . . . . . . 128
Euro Banknote Handler (EBH/RM2) (Class: 005E) . . . . . . . . . . . . . . . . 164
EBH Cash In (EBH/RM2) (Class: 005E_CIN) . . . . . . . . . . . . . . . . . . . . 165
Printer Form errors (REC/DOC) (Class: 6431) . . . . . . . . . . . . . . . . . . . 167
RM3 (CINEO series) errors (Class: 65C0) . . . . . . . . . . . . . . . . . . . . . . 168
RM3 (CINEO series) errors (Class: 65C0_CIN) . . . . . . . . . . . . . . . . . . 179
Application Error Classes (LYNX errors) . . . . . . . . . . . . . . . . . . . . . . . . . . 191
Transaction (Class: 6434) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
Cash Dispenser (Class: 643A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
Security Module (Class: 643C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
CashIn transaction (Class: 6446) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
WEB Dialog wrapper (Class: 6447) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
EMV transaction (Class: 6459) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Cheque transaction (Class: 645A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Electronic Journal (Class: 0091) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
XFS 2.0 Error Classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Cash Dispenser (Class: 00B9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Cash In (Class: 00B9_CIN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201

MDS Status 912/911 Reference Tables . . . . . . . . . . . . . . . . . . . . . . . . . . 207

CSC-W32 Error Classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Cash Dispenser V1 (old series) (Class: 0007) . . . . . . . . . . . . . . . . . . . 207
Cash Dispenser NG (Classes: 0018/AA18/001D) . . . . . . . . . . . . . . . . . 211
CRS NG (Classes: 0018_CIN/AA18_CIN/001D_CIN) . . . . . . . . . . . . . 226
Cash Cheque Deposit Module (Classes: 001A/XX1A) . . . . . . . . . . . . . 233
Cash Cheque Deposit Module (Class: 001A_CHQ) . . . . . . . . . . . . . . . 251
Encryption Decryption Module (Class: 000F) . . . . . . . . . . . . . . . . . . . . 257
Encryption Decryption Software (Class: 0011) . . . . . . . . . . . . . . . . . . . 258
Card Reader (Class: 0008/AA08) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259
Deposit Module (Class: 0017/AA17) . . . . . . . . . . . . . . . . . . . . . . . . . . . 264
Vandal Guard (Class: 0015) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268
Motorized Door (Class: 000E) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269

May 2011 U25604-J-Z745-1-7600

Contents

Coin Out module (Class: 0021) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269

Coin In module (Class: 0022) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270
P6 (P36) (Class: 0027) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
Printer (Class: 0032) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
Printer ND71/74/98/9A/9C/9E/TH30 (Class: 0033) . . . . . . . . . . . . . . . 274
Printer ND75/75S/94 (Class: 0034) . . . . . . . . . . . . . . . . . . . . . . . . . . . 275
Printer ND79 (Class: 0035) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275
Printer ND99 (Class: 0038) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
Printer ND97/TH97/TP01/NP01/TP05/NP05 (Class: 0039) . . . . . . . . . 277
SEAC Cheque Scanner (Class: 003D) . . . . . . . . . . . . . . . . . . . . . . . . . 280
Printer TH21 (Class: 003E) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
Printer Extensions (Class: 003F) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
Printer Monitor ND9G (Class: 0040) . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
Printer Monitor TH21 (Class: 0041) . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
Printer System Framework (Class: 0042) . . . . . . . . . . . . . . . . . . . . . . . 283
Printer TP07 GDI (Class: 0044) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
Printer TP07 (Class: 0045) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
Printer USB/TP07 (Class: AA45) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
Printer TP06 (Class: 0048) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288
Printer USB/TP06 (Class: AA48) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
Printer TP13 (Class: 004A/004B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292
Reiner Scanner (Class: 0051) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
Printer TP12 (Class: 0052) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
Single Note Acceptor (SNA/JCM/WBA) (Class: 0059) . . . . . . . . . . . . . 297
Euro Banknote Handler (EBH/RM2) (Class: 005A) . . . . . . . . . . . . . . . 298
EBH Cash In (EBH/RM2) (Class: 005A_CIN) . . . . . . . . . . . . . . . . . . . 333
Euro Banknote Handler (EBH/RM2) (Class: 005E) . . . . . . . . . . . . . . . 361
EBH Cash In (EBH/RM2) (Class: 005E_CIN) . . . . . . . . . . . . . . . . . . . 363
Printer Form errors (REC/DOC) (Class: 6431) . . . . . . . . . . . . . . . . . . . 365
RM3 (CINEO series) errors (Class: 65C0) . . . . . . . . . . . . . . . . . . . . . . 366
RM3 (CINEO series) errors (Class: 65C0_CIN) . . . . . . . . . . . . . . . . . . 379
Application Error Classes (LYNX errors) . . . . . . . . . . . . . . . . . . . . . . . . . . 391
Transaction (Class: 6434) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 391
Cash Dispenser (Class: 643A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 393
Security Module (Class: 643C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394
CashIn transaction (Class: 6446) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394
WEB Dialog wrapper (Class: 6447) . . . . . . . . . . . . . . . . . . . . . . . . . . . 395
EMV transaction (Class: 6459) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395
Cheque transaction (Class: 645A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 396

U25604-J-Z745-1-7600 May 2011

 Contents

Electronic Journal (Class: 0091) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 396

XFS 2.0 Error Classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 397
Cash Dispenser (Class: 00B9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 397
Cash In (Class: 00B9_CIN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401

Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405

May 2011 U25604-J-Z745-1-7600

Error Class Mapping

Class mapping of CSC-W32 and XFS classes

CSC-W32 generates several error classes that cannot be mapped to an NDC
or DDC device class, the same has to be done for some XFS error classes.
Therefore the Device Status Framework (dcDevSta.dll) assigns those errors to
a valid NDC or DDC device class. See also contents of the Error Mapping Table
CCERRMAP.INA located in "C:\PROTOPAS\CONF".

Please refer to the "System Messages" manual of CSC-W32 for detailed

error description of error CSC-W32 error classes.

The following table illustrates which CSC-W32 or JDD and XFS error classes
are currently assigned to the internal generated device class.

Table 1: CSC-W32 and XFS class assign table

CSC-W32 or JDD class Assigned Device description

Class
0005 (V.24 comm.) 0008 Card Reader
0003 (USB comm.) AA08
0005 (V.24 comm.) 0033 Journal printer
0032 (global PRT class
0003 (USB comm.) AA48
0005 (V.24 comm.) 0038 Receipt printer
0032 (global PRT class)
0003 (USB comm.) AA45
0005 (V.24 comm.) 0039 Document printer
0032 (global PRT class)
0003 (USB comm.) AA39
0005 (V.24 comm.) 0018 Cash dispenser (CDM)
0003 (USB comm.) AA18
0005 (V.24 comm.) 0017 Deposit module
0003 (USB comm.) AA17
0003 (USB comm.) AA18_CIN CRS (CashIn)
0005 (V.24 comm.) 0018_CIN
0018 (CDM basic error) 0018_CIN
001D (CDM extended error) 001D_CIN

U25604-J-Z745-1-7600 May 2011 5

Class mapping of CSC-W32 and XFS classes Error Class Mapping

0003 (USB comm.) CC1A CCDM (CashIn)

0004 (IEEE 1394 class) BB1A
0005 (V.24 comm.) EE1A
0003 (USB comm.) DD1A CCDM (Cheque In)
0004 (IEEE 1394 class) AA1A
0005 (V.24 comm.) FF1A
001A (CCDM errors) 001A_CHQ CCDM (ChequeIn)
005A (RM2) 005A_CIN RM2 (CashIn)
005E (RM2) 005E_CIN RM2 (CashIn)
65C0 (RM3) 65C0_CIN RM3 (CashIn)
00B9 (XFS 2.0 CDM errors) 00B9_CIN CRS (CashIn)
6752 (XFS 3.0 CDM errors) 001D CDM (CashOut)
6751 (XFS 3.0 CRS errors) 001D CRS (CashOut)

Error mapping of XFS30 (WOSA) error events

Some error events generated from the XFS30 layer, especially from the cash
dispenser and cash recycler service, are necessarily remapped internally to an
existing CSC-W32 StClass and StCode by the Device Status framework
(dcDevSta.dll).
The following table illustrates which XFS30 classes and error codes are
currently remapped.

Table 2: XFS30 - CSC-W32 class assign table

XFS30 Assigned XFS30 Assigned Involved XFS Service

class CSC-W32 code range CSC-W32
class code range
6751 001D Dxxx 1xxx PSCDM30 (Cash Dispenser Service)
6752 001D Dxxx 3xxx PSCRS30 (Cash Recycler Service)

6 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables
The following tables show the CSC-W32 device error classes that are mapped
to the NDC Maintenance M-Status and M-Data error codes. The registry path
..\ProTopas\CurrentVersion\CCERRMAP\ is devided in error sub sections
where in each section the M-Status and M-Data status code is mapped.
In addition you will find reference tables of application error codes (so called
LYNX errors as nick name, which can be identified by the class numbers 64xx).
The error mapping can be customized in configuration file "CCERRMAP.INA".
See ProCash/DDC ProConsult/DDC Installation manual section "Parameter
Management" for details about setting up the error mapping table
(CCERRMAP.INA) and how to update the contents into the Windows registry.
Detailed descriptions about CSC-W32 error codes of each device class are
described in the manual CSC-W32 System Messages (available on the Wincor
Nixdorf Intranet server).

U25604-J-Z745-1-7600 May 2011 7

CSC-W32 Error Classes M-Status & M-Data Reference Tables

CSC-W32 Error Classes

Cash Dispenser V1 (old series) (Class: 0007)

The following table lists the M-Status and M-Data codes assigned to the device
class Cash Dispenser V1 (old series, will not produced any more).

Table 3: Cash Dispenser V1 (Class: 0007)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0007 DEFA_W 2 09 00000000000000000000 "DISPENSER V1: Default warning if no CSCW32 error found"
0007 DEFA_E 4 09 00000000000000000000 "DISPENSER V1: Default error if no CSCW32 error found"
0007 0100_E 2 03 00002727272700000000 "DISPENSER V1: No cash in collecting tray"
0007 0200_E 2 09 00000000000000000000 "DISPENSER V1: Transport direction illegal"
0007 0300_E 2 08 00000000000000000000 "DISPENSER V1: Remaining capacity of reject bin to small"
0007 0400_E 2 09 00000000000000000000 "DISPENSER V1: Syntax error in job"
0007 1000_E 2 09 00000000000000000000 "DISPENSER V1: Incorrect block length, error in job"
0007 1100_E 2 09 00000000000000000000 "DISPENSER V1: Incorrect device specification, error in job"
0007 1200_E 2 09 00000000000000000000 "DISPENSER V1: Wrong job specification"
0007 1300_E 2 09 00000000000000000000 "DISPENSER V1: Incorrect job length"
0007 1400_E 2 09 00000000000000000000 "DISPENSER V1: Addressed cassette does not exist"
0007 1500_E 2 09 00000000000000000000 "DISPENSER V1: Attempt to read from an unknown area"
0007 1600_E 2 09 00000000000000000000 "DISPENSER V1: Field name in job unknown"
0007 1700_E 2 09 00000000000000000000 "DISPENSER V1: Syntax error in job"
0007 1800_E 2 09 00000000000000000000 "DISPENSER V1: Invalid transport destination"
0007 1900_E 2 09 00000000000000000000 "DISPENSER V1: Illegal separator used in the job"
0007 1A00_E 2 09 00000000000000000000 "DISPENSER V1: A job was previously issued and is still busy"
0007 1B00_E 2 09 00000000000000000000 "DISPENSER V1: Attempt to write to protected cass. EEPROM"
0007 1C00_E 2 09 00000000000000000000 "DISPENSER V1: There is no PUT PROM in the cash-out controller"
0007 1D00_E 2 09 00000000000000000000 "DISPENSER V1: Illegal specification transferred in SV job"
0007 2000_E 2 03 00000303030300000000 "DISPENSER V1: Amount demanded cannot be dispensed"
0007 2100_E 2 05 00000000000000000000 "DISPENSER V1: Time-out in photosensor of measuring station"
0007 2200_E 2 05 00000000000000000000 "DISPENSER V1: Time-out photosensor L1"
0007 2300_E 2 05 00000000000000000000 "DISPENSER V1: Time-out for collecting tray photosensor L19"
0007 2400_E 2 05 00000000000000000000 "DISPENSER V1: Time-out in photosensor L20 for reject cassette"
0007 2500_E 2 07 00000000000000000000 "DISPENSER V1: Single reject switch defective"
0007 2600_E 2 02 00000000000000000000 "DISPENSER V1: All banknotes were identified as multiple
dispenses"
0007 2700_E 2 03 00000000000000000000 "DISPENSER V1: The dispenser module is defective"
0007 2800_E 2 04 00000000000000000000 "DISPENSER V1: Requested amount cannot be dispensed"
0007 2900_E 2 01 00000000000000000000 "DISPENSER V1: no cassette for the requested currency"
0007 2A00_E 2 00 00000000000000000000 "DISPENSER V1: parameter is larger than 40 banknotes"
0007 2B00_E 2 05 00000000000000000000 "DISPENSER V1: Electronics of the photosensor amplifier defect"
0007 2C00_E 2 20 00000000000000000000 "DISPENSER V1: Unknow device configuration"
0007 2D00_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L1,L17,L25"
0007 3100_E 2 05 00000000000000000000 "DISPENSER V1: Times-out of path monitor in 1. dispenser module"
0007 3200_E 2 05 00000000000000000000 "DISPENSER V1: Time-out of path monitor in 2. dispenser module"
0007 3300_E 2 05 00000000000000000000 "DISPENSER V1: Time-out of path monitor in 3. dispenser module"
0007 3400_E 2 05 00000000000000000000 "DISPENSER V1: Time-out of path monitor in 4. dispenser module"
0007 3500_E 2 05 00000000000000000000 "DISPENSER V1: Time-out of path monitor in 5. dispenser module"
0007 5000_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L17 blocked"
0007 5100_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L18 or L22 blocked"
0007 5110_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L18 does not become free"
0007 5111_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L18 does not become free"
0007 5118_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L18 is not reached"
0007 5119_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L18 is not reached"
0007 5200_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L19 blocked"
0007 5210_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L19 does not become free"

8 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
0007 5211_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L19 does not become free"
0007 5218_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L19 is not reached"
0007 5219_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L19 is not reached"
0007 5300_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L20 blocked"
0007 5400_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L21 blocked"
0007 5410_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L21 does not become free"
0007 5418_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L21 is not reached"
0007 5500_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L22 does not become free"
0007 5510_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L22 does not become free"
0007 5511_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L22 does not become free"
0007 5518_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L22 is not reached"
0007 5519_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L22 is not reached"
0007 5610_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L23 does not become free"
0007 5611_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L23 does not become free"
0007 5618_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L23 is not reached"
0007 5619_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L23 is not reached"
0007 5700_E 2 05 00000000000000000000 "DISPENSER V1: Does not reach the bottom Collecting tray swivel
arm"
0007 5710_E 2 05 00000000000000000000 "DISPENSER V1: Swivel arm does not reach the bottom"
0007 5800_E 2 05 00000000000000000000 "DISPENSER V1: Collecting tray swivel arm does not reach the top"
0007 5810_E 2 05 00000000000000000000 "DISPENSER V1: Swivel arm does not reach the top position"
0007 5B00_E 2 05 00000000000000000000 "DISPENSER V1: Money slot/shutter does not close completely"
0007 5B10_E 2 05 00000000000000000000 "DISPENSER V1: Shutter was not closed completely"
0007 5B11_E 2 05 00000000000000000000 "DISPENSER V1: Shutter was not closed completely"
0007 5B12_E 2 05 00000000000000000000 "DISPENSER V1: Shutter was not closed completely"
0007 5B13_E 2 05 00000000000000000000 "DISPENSER V1: Shutter was not closed completely"
0007 5C00_E 2 05 00000000000000000000 "DISPENSER V1: Money slot/shutter does not open completely"
0007 5C10_E 2 05 00000000000000000000 "DISPENSER V1: Shutter was not open completely"
0007 5C11_E 2 05 00000000000000000000 "DISPENSER V1: Shutter was not completely open"
0007 5C12_E 2 05 00000000000000000000 "DISPENSER V1: Shutter was not completely open"
0007 5C13_E 2 05 00000000000000000000 "DISPENSER V1: Shutter was not completely open"
0007 5D00_E 2 05 00000000000000000000 "DISPENSER V1: Money does not reach L17"
0007 5D10_E 2 05 00000000000000000000 "DISPENSER V1: Transport motor M2 does not return timing
pulses"
0007 5D11_E 2 05 00000000000000000000 "DISPENSER V1: Transport motor M2 does not return timing
pulses"
0007 5F10_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L25 blocked"
0007 5F11_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L25 does not become free"
0007 5F18_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L25 is not reached"
0007 5F19_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L25 is not reached"
0007 6300_E 2 05 00000000000000000000 "DISPENSER V1: Money does not reach L21"
0007 6310_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L21 does not become free"
0007 6311_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L21 does not become free"
0007 6318_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L21 not reached"
0007 6319_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L21 is not reached"
0007 7010_E 2 05 00000000000000000000 "DISPENSER V1: Correct performed retract after TIMEOUT"
0007 7011_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L26 does not become free"
0007 7012_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L26 unexpectedly covered"
0007 7013_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L26 unexpectedly covered"
0007 7018_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L26 is not reached"
0007 7019_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L26 already free before retract"
0007 7110_E 2 05 00000000000000000000 "DISPENSER V1: Correct retract performed after TIMEOUT"
0007 7111_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L27 does not become free"
0007 7112_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L27 unexpectedly covered"
0007 7113_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L26 unexpectedly covered"
0007 7118_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L27 is not reached"
0007 7119_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L27 becomes free nevertheless"
0007 7210_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L28 does not become free"
0007 7211_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L28 does not become free"
0007 7218_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L28 is not reached"
0007 7219_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L28 is not reached"
0007 7310_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L29 does not become free"

U25604-J-Z745-1-7600 May 2011 9

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
0007 7311_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L29 does not become free"
0007 7318_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L29 is not reached"
0007 7319_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L29 is not reached"
0007 7410_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L30 does not become free"
0007 7411_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L30 does not become free"
0007 7418_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L30 is not reached"
0007 7419_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L30 is not reached"
0007 7510_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L31 does not become free"
0007 7511_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L31 does not become free"
0007 7518_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L31 is not reached"
0007 7519_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L31 is not reached"
0007 7610_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L32 does not become free"
0007 7611_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L32 does not become free"
0007 7618_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L32 is not reached"
0007 7619_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L32 is not reached"
0007 7710_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L33 does not become free"
0007 7711_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L33 does not become free"
0007 7718_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L33 is not reached"
0007 7719_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L33 is not reached"
0007 7910_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L35 does not become free"
0007 7911_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L35 does not become free"
0007 7918_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L35 is not reached"
0007 7919_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor L35 is not reached"
0007 7B10_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor G9 is not reached"
0007 7B11_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor G9 is not reached"
0007 7C10_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor G8 is not reached"
0007 7C11_E 2 05 00000000000000000000 "DISPENSER V1: Photosensor G8 is not reached"
0007 8000_E 2 41 00000000000000000000 "DISPENSER V1: Invalid cassette slot"
0007 8001_E 2 09 00000000000000000000 "DISPENSER V1: Error in self-test"
0007 8002_E 2 09 00000000000000000000 "DISPENSER V1: Internal error Possible hardware error"
0007 8004_E 2 09 00000000000000000000 "DISPENSER V1: Error occurs only with coded V24 line to the CDM"
0007 8005_E 2 09 00000000000000000000 "DISPENSER V1: DLL for SW encording, CSCEDSDLL, could not
be opened"
0007 8006_E 2 09 00000000000000000000 "DISPENSER V1: Invalid CRC received with encoded line"
0007 8007_E 2 09 00000000000000000000 "DISPENSER V1: Keyword specified in parameter block has invalid
length"
0007 8009_E 2 09 00000000000000000000 "DISPENSER V1: The segment selector is invalid"
0007 9000_E 2 09 00000000000000000000 "DISPENSER V1: Time-out during comm. with measuring station"
0007 9100_E 2 09 00000000000000000000 "DISPENSER V1: Time-out during comm. with photosensor
amplifier"
0007 9200_E 2 09 00000000000000000000 "DISPENSER V1: Customer relay not connected"
0007 B000_E 2 09 00000000000000000000 "DISPENSER V1: Error when releasing the cassette"
0007 B100_E 2 09 00000000000000000000 "DISPENSER V1: Error when initiating the cassette"
0007 B200_E 2 09 00000000000000000000 "DISPENSER V1: No reject cassette"
0007 B300_E 2 07 00000000000000000000 "DISPENSER V1: There is no dispensing cassette"
0007 B400_E 2 09 00000000000000000000 "DISPENSER V1: Time-out at cassette initialization/release"
0007 B510_E 2 09 00000000000000000000 "DISPENSER V1: EE-PROM defect"
0007 B511_E 2 09 00000000000000000000 "DISPENSER V1: Main motor is not working"
0007 B512_E 2 09 00000000000000000000 "DISPENSER V1: Incorrect motor speed"
0007 B513_E 2 09 00000000000000000000 "DISPENSER V1: Hardware error (processor)"
0007 B514_E 2 09 00000000000000000000 "DISPENSER V1: Hardware error (E-PROM)"
0007 B523_E 2 09 00000000000000000000 "DISPENSER V1: Cassette busy (pressure being accumulated)"
0007 B530_E 2 09 00000000000000000000 "DISPENSER V1: Reject position cannot be reached"
0007 B531_E 2 09 00000000000000000000 "DISPENSER V1: Reject position cannot be reached"
0007 B534_E 2 09 00000000000000000000 "DISPENSER V1: Processor defect"
0007 B535_E 2 09 00000000000000000000 "DISPENSER V1: RAM defect"
0007 B536_E 2 09 00000000000000000000 "DISPENSER V1: Checksum error, E-PROM"
0007 B537_E 2 09 00000000000000000000 "DISPENSER V1: Checksum error, EE-PROM"
0007 B538_E 2 09 00000000000000000000 "DISPENSER V1: Clutch signal error"
0007 B539_E 2 09 00000000000000000000 "DISPENSER V1: Dispensing sensor error"
0007 B544_E 2 09 00000000000000000000 "DISPENSER V1: Evaluation electronics defect"
0007 B545_E 2 09 00000000000000000000 "DISPENSER V1: Card is not in a device"

10 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
0007 B546_E 2 09 00000000000000000000 "DISPENSER V1: Device could not be identified"
0007 B547_E 2 09 00000000000000000000 "DISPENSER V1: Job currently not allowed"
0007 B548_E 2 09 00000000000000000000 "DISPENSER V1: Job unknown"
0007 B600_E 2 09 00000000000000000000 "DISPENSER V1: Area/subarea selected does not exist"
0007 B700_E 2 09 00000000000000000000 "DISPENSER V1: No free block"
0007 B800_E 2 09 00000000000000000000 "DISPENSER V1: Area selected already exists"
0007 B900_E 2 09 00000000000000000000 "DISPENSER V1: Character cannot be written"
0007 BA00_E 2 09 00000000000000000000 "DISPENSER V1: Attempt to write to a write-protected area"
0007 BB00_E 2 09 00000000000000000000 "DISPENSER V1: Error during processing of the cassette EE-
PROM"
0007 BC00_E 2 09 00000000000000000000 "DISPENSER V1: Required area cannot be dissolved"
0007 BD00_E 2 09 00000000000000000000 "DISPENSER V1: Old password incorrect"
0007 BE00_E 2 09 00000000000000000000 "DISPENSER V1: Syntax error in job"
0007 C000_E 2 09 00000000000000000000 "DISPENSER V1: Cash cannot be dispensed from the selected
cassette"
0007 C100_E 2 09 00000000000000000000 "DISPENSER V1: Cash cannot dispensed from cassette"
0007 C200_E 2 09 00000000000000000000 "DISPENSER V1: Hardware lock"
0007 C300_E 2 09 00000000000000000000 "DISPENSER V1: Cannot determine reference value"
0007 C400_E 2 09 00000000000000000000 "DISPENSER V1: Number of banknotes too high for reference
value"
0007 C500_E 2 09 00000000000000000000 "DISPENSER V1: Not possible to determine the reference value"
0007 C600_E 2 09 00000000000000000000 "DISPENSER V1: Not possible to accumulate the data-specific
pressure"
0007 D000_E 2 09 00000000000000000000 "DISPENSER V1: The transport key is missing"
0007 D100_E 2 09 00000000000000000000 "DISPENSER V1: The line key is missing"
0007 D200_E 2 09 00000000000000000000 "DISPENSER V1: The safe door is not open"
0007 D300_E 2 09 00000000000000000000 "DISPENSER V1: CODE TEST application command not possible"
0007 D400_E 2 09 00000000000000000000 "DISPENSER V1: Key test not possible, because encryption is off"
0007 D500_E 2 09 00000000000000000000 "DISPENSER V1: This message occurs in the dialog"
0007 D600_E 2 09 00000000000000000000 "DISPENSER V1: This error occurs in the dialog"

U25604-J-Z745-1-7600 May 2011 11

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Cash Dispenser NG (Classes: 0018/AA18/001D)

The following table lists the M-Status and M-Data codes assigned to the device
classes Cash Dispenser NG. Error codes of class "0018" are basic errors. Class
AA18 is the USB class assigned to the Cash Dispenser device. Error codes of
class "001D" are extended errors.

The class AA18 is an internal generated class that is derived from the
original CSC-W32 USB communication class 0003.
Refer to section ”Error Class Mapping” on page 5.

Table 4: Cash Dispenser NG (Classes: 0018/AA18/001D))

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0018 DEFA_W 2 00 00000000000000000000 "DISPENSER NG: DEFAULT_WARNING"
0018 DEFA_E 4 00 00000000000000000000 "DISPENSER NG: DEFAULT_ERROR"
0018 E000_W 2 19 00000000000000000000 "DISPENSER NG: No banknotes taken by the customer"
0018 E000_E 2 19 00000000000000000000 "DISPENSER NG: No banknotes taken by the customer"
0018 E001_W 1 34 00000000000000000000 "DISPENSER NG: All banknotes taken by the customer"
0018 E001_E 1 34 00000000000000000000 "DISPENSER NG: All banknotes taken by the customer"
0018 E002_W 1 09 00000000000000000000 "DISPENSER NG: Firmware on disk is newer than SW loaded in
CDM-NG"
0018 E002_E 1 09 00000000000000000000 "DISPENSER NG: Firmware on disk is newer than SW loaded in
CDM-NG"
0018 E003_W 1 09 00000000000000000000 "DISPENSER NG: There is no firmware loaded in the CDM-NG"
0018 E003_E 1 09 00000000000000000000 "DISPENSER NG: There is no firmware loaded in the CDM-NG"
0018 E004_W 1 00 00000000000000000000 "DISPENSER NG: DH configured to switch LEDs"
0018 E004_E 0 00 00000000000000000000 "DISPENSER NG: DH configured to switch LEDs"
0018 E005_W 2 05 00000000000000000000 "DISPENSER NG: Handling error at the filling tray"
0018 E005_E 2 05 00000000000000000000 "DISPENSER NG: Handling error at the filling tray"
0018 EF00_E 4 09 00000000000000000000 "DISPENSER NG: V24 data not in the expected format"
0018 EF01_E 1 09 00000000000000000000 "DISPENSER NG: Invalid CRC received with encrypted line"
0018 EF02_E 1 09 00000000000000000000 "DISPENSER NG: Wrong value for FRM_AUTO_LOAD in CSCCNG
section"
0018 EF03_E 1 09 00000000000000000000 "DISPENSER NG: Wrong value for LED in CSCINI/Registry with
CSCCNG"
0018 EF04_E 1 09 00000000000000000000 "DISPENSER NG: Firmware loading could not be completed"
0018 EF05_E 1 09 00000000000000000000 "DISPENSER NG: Invalid currency files, check registry configu-
ration"
0018 EF06_E 1 09 00000000000000000000 "DISPENSER NG: Invalid currency Firmware loading could not be
completed"
0018 EF07_E 1 09 00000000000000000000 "DISPENSER NG: Wrong value for RECOVERY in Registry"
0018 EF08_E 1 09 00000000000000000000 "DISPENSER NG: Wrong value for VARIANT in Registry"
0018 EF09_E 1 09 00000000000000000000 "DISPENSER NG: Wrong value for BEB_STATISTICS in Registry"
0018 EF0A_E 1 09 00000000000000000000 "DISPENSER NG: Not enough currency files installed"
0018 EF0B_E 1 09 00000000000000000000 "DISPENSER NG: Wrong value for CHECK_MODULES in Registry"
0018 EF0C_E 1 09 00000000000000000000 "DISPENSER NG: Wrong value for DISPENSEIN_TRACE in
Registry"
0018 EF0D_E 1 09 00000000000000000000 "DISPENSER NG: Wrong value for CY_AUTOLOAD in Registry"
0018 EF0E_E 1 09 00000000000000000000 "DISPENSER NG: Wrong value for CY_MAP_NOTES in Registry"
0018 EF0F_E 1 09 00000000000000000000 "DISPENSER NG: Wrong value for CONFIG_BACKUP in Registry"
0018 EF10_E 1 09 00000000000000000000 "DISPENSER NG: Wrong value for LOADER_CTL in Registry"
0018 EF11_E 1 09 00000000000000000000 "DISPENSER NG: BIM module of wrong type recognized"
0018 EF12_E 1 09 00000000000000000000 "DISPENSER NG: Currency file could not be opened"
0018 EF13_E 1 09 00000000000000000000 "DISPENSER NG: Currency file could not be read"
0018 EF14_E 1 09 00000000000000000000 "DISPENSER NG: Firmware file could not be opened"
0018 EF15_E 1 09 00000000000000000000 "DISPENSER NG: Firmware file could not be read"

12 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
0018 EF16_E 1 09 00000000000000000000 "DISPENSER NG: Invalid firmware file format"
0018 EF17_E 1 09 00000000000000000000 "DISPENSER NG: BIM manipulation"
0018 EF18_E 1 09 00000000000000000000 "DISPENSER NG: SCOPE active but jumper of CMD-V4 in wrong
position"
0018 EF1A_E 1 09 00000000000000000000 "DISPENSER NG: Wrong value for FILE_CTR in Registry"
0018 F000_E 1 09 00000000000000000000 "DISPENSER NG: Firmware not loaded in CDM-NG"
0018 F001_E 4 09 00000000000000000000 "DISPENSER NG: Wrong syntax"
0018 F002_E 2 09 00000000000000000000 "DISPENSER NG: One of the locks is active"
0018 F003_E 2 09 00000000000000000000 "DISPENSER NG: Error occured during execution of command"
0018 F004_E 2 00 00000000000000000000 "DISPENSER NG: Safe door must be open for this command"
0018 F005_E 4 09 00000000000000000000 "DISPENSER NG: The command cannot be executed at this point of
time"
0018 F006_E 2 09 00000000000000000000 "DISPENSER NG: The CDM-NG recognized a problem with the
encryption"
0018 F007_E 2 11 00000000000000000000 "DISPENSER NG: If no error found"
0018 F012_E 4 11 00000000000000000000 "DISPENSER NG: Same error as
CNG_FRM_DEVICE_NOT_READY"
0018 F013_E 2 09 00000000000000000000 "DISPENSER NG: The same error as CNG_FRM_ERROR with an
exception"
0018 F015_E 2 09 00000000000000000000 "DISPENSER NG: The same error as CNG_FRM_CONTEXT with
an exception"
0018 FE06_E 4 09 00000000000000000000 "DISPENSER NG: COMM reports invalid spec. for the protocol"
0018 FE07_E 4 09 00000000000000000000 "DISPENSER NG: A COMM WRITE command is cancelled by the
user"
0018 FE08_E 4 09 00000000000000000000 "DISPENSER NG: COMM WRITE command could not be executed"
0018 FE09_E 4 09 00000000000000000000 "DISPENSER NG: A COMM READ command could not be
executed"
0018 FE0A_E 4 09 00000000000000000000 "DISPENSER NG: A COMM READ command is cancelled by the
user"
0018 FE0B_E 4 09 00000000000000000000 "DISPENSER NG: The COMM driver reports a parity error"
0018 FE0C_E 4 09 00000000000000000000 "DISPENSER NG: The COMM driver reports a general error"
0018 FE0F_E 4 09 00000000000000000000 "DISPENSER NG: Peripheral device did not answer"
0018 FE13_E 4 09 00000000000000000000 "DISPENSER NG: The channel was not initialized"
0018 FE16_E 4 09 00000000000000000000 "DISPENSER NG: The COMM driver reports a break"
0018 FE7A_E 4 09 00000000000000000000 "DISPENSER NG: The COMM driver reports a overrun error"
0018 FE7B_E 4 09 00000000000000000000 "DISPENSER NG: The COMM driver reports a frameing error"
0018 FE85_E 4 09 00000000000000000000 "DISPENSER NG: The COMM driver could not be opened"
0018 FE89_E 4 09 00000000000000000000 "DISPENSER NG: The pointer pTxData is illegal"
0018 FE8B_E 4 09 00000000000000000000 "DISPENSER NG: Called function is invalid for CscCommOpen"
0018 FE8C_E 4 09 00000000000000000000 "DISPENSER NG: The peripheral device does not return an STX"
0018 FE8D_E 4 09 00000000000000000000 "DISPENSER NG: The peripheral device does not return an ETX"
0018 FE8E_E 4 09 00000000000000000000 "DISPENSER NG: Block length does not agree with the transmitted
block length"
0018 FE8F_E 4 09 00000000000000000000 "DISPENSER NG: The block ID is invalid"
0018 FE90_E 4 09 00000000000000000000 "DISPENSER NG: Received DID does not agree with the transmitted
DID"
0018 FE91_E 4 09 00000000000000000000 "DISPENSER NG: Wrong command specification"
0018 FE92_E 4 09 00000000000000000000 "DISPENSER NG: The received acknowledge type is invalid"
0018 FE93_E 4 09 00000000000000000000 "DISPENSER NG: Max no of repeat transmissions reached"
0018 FE94_E 4 09 00000000000000000000 "DISPENSER NG: Max no of receive repeats has been reached"
0018 FE95_E 4 09 00000000000000000000 "DISPENSER NG: Monitoring time during transmission has been
exceeded"
0018 FE96_E 4 09 00000000000000000000 "DISPENSER NG: Monitoring time during receive has been
exceeded"
0018 FE97_E 4 09 00000000000000000000 "DISPENSER NG: Busy time from phys. device excceeded"
0018 FE98_E 4 09 00000000000000000000 "DISPENSER NG: The protocol was cancelled"
0018 FE9C_E 4 09 00000000000000000000 "DISPENSER NG: The length in TxData is 0"
0018 FE9D_E 4 09 00000000000000000000 "DISPENSER NG: CSCWISODLL could not be found in the PATH"
0018 FE9E_E 4 09 00000000000000000000 "DISPENSER NG: The CSCWISODLL could not be opened"
0018 FEE0_E 4 09 00000000000000000000 "DISPENSER NG: The peripheral device did not answer"
0018 FEE1_E 4 09 00000000000000000000 "DISPENSER NG: Peripheral device did not answer as expected"
0018 FEE2_E 4 09 00000000000000000000 "DISPENSER NG: The peripheral device is busy"
0018 FEE3_E 4 09 00000000000000000000 "DISPENSER NG: Peripheral device did not answer as expected"
0018 FEE4_E 4 09 00000000000000000000 "DISPENSER NG: Max no. of repeat transmissions reached"

U25604-J-Z745-1-7600 May 2011 13

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
0018 FEE5_E 4 09 00000000000000000000 "DISPENSER NG: Device asked for termination"
0018 FEE6_E 4 09 00000000000000000000 "DISPENSER NG: Peripheral device did not answer"
0018 FEE7_E 4 09 00000000000000000000 "DISPENSER NG: Response of device not completely received"
0018 FEE8_E 4 09 00000000000000000000 "DISPENSER NG: The header of the response is invalid"
0018 FEE9_E 4 09 00000000000000000000 "DISPENSER NG: DID does not agree with the transmitted DID"
0018 FEEA_E 4 09 00000000000000000000 "DISPENSER NG: DID does not agree with the transmitted device
ID"
0018 FEEB_E 4 09 00000000000000000000 "DISPENSER NG: Command spec. does not agree with the trans-
mitted command spec."
0018 FEEC_E 4 09 00000000000000000000 "DISPENSER NG: The response of the device has not been
completely received"
0018 FEED_E 4 09 00000000000000000000 "DISPENSER NG: A cancel command has been called"
0018 FEEF_E 4 09 00000000000000000000 "DISPENSER NG: A cancel command has been called"
0018 FEF0_E 4 09 00000000000000000000 "DISPENSER NG: The command could not be executed"
0018 FEF1_E 4 09 00000000000000000000 "DISPENSER NG: The command was aborted by the user"
0018 FEF2_E 4 09 00000000000000000000 "DISPENSER NG: The command could not be executed"
0018 FEF3_E 4 09 00000000000000000000 "DISPENSER NG: A cancel command could not be executed"
0018 FEF4_E 4 09 00000000000000000000 "DISPENSER NG: Internal monitoring time exceeded"
0018 FEF5_E 4 09 00000000000000000000 "DISPENSER NG: Internal error within the CSCWISODLL"
AA18 DEFA_W 4 09 00000000000000000000 "USB/CDM: DEFAULT_WARNING"
AA18 DEFA_E 4 09 00000000000000000000 "USB/CDM: DEFAULT_ERROR"
AA18 8000_E 4 09 00000000000000000000 "USB/CDM: Unexpected descriptor was reported from USB device"
AA18 8001_E 4 09 00000000000000000000 "USB/CDM: Device not found"
AA18 8002_E 4 09 00000000000000000000 "USB/CDM: Not enough memory available"
AA18 8003_E 4 09 00000000000000000000 "USB/CDM: It was no endpoint found in the descriptor"
AA18 8004_E 4 09 00000000000000000000 "USB/CDM: The creation of the list of USB devices failed"
AA18 FE09_E 4 09 00000000000000000000 "USB/CDM: USB read command could not be executed in the
specified monitoring time"
AA18 FE0A_E 4 09 00000000000000000000 "USB/CDM: USB READ command is cancelled by the user"
AA18 FE89_E 4 09 00000000000000000000 "USB/CDM: The pointer pData is illegal"
AA18 FE9C_E 4 09 00000000000000000000 "USB/CDM: The length in DataSize is 0 (zero)"
AA18 0001_E 4 09 00000000000000000000 "USB/CDM: CRC error has been detected"
AA18 0002_E 4 09 00000000000000000000 "USB/CDM: Bit stuffing error has been detected"
AA18 0003_E 4 09 00000000000000000000 "USB/CDM: DATA toggle mismatch has been detected"
AA18 0004_E 4 09 00000000000000000000 "USB/CDM: STALLPID has been detected, error is reported by the
USB host controller"
AA18 0005_E 4 09 00000000000000000000 "USB/CDM: USB device is not responding, error is reported by the
USB host"
AA18 0006_E 4 09 00000000000000000000 "USB/CDM: PID check has failed, error is reported by the USB host
controller"
AA18 0007_E 4 09 00000000000000000000 "USB/CDM: Unexpected PID detected, error is reported by the USB
host"
AA18 0008_E 4 09 00000000000000000000 "USB/CDM: Data overrun error detected, error is reported by the
USB host"
AA18 0009_E 4 09 00000000000000000000 "USB/CDM: Data underrun error detected, error is reported by the
USB host"
AA18 000A_E 4 09 00000000000000000000 "USB/CDM: Error code is reserved by the USB host controller driver"
AA18 000B_E 4 09 00000000000000000000 "USB/CDM: Error code is reserved by the USB host controller driver"
AA18 000C_E 4 09 00000000000000000000 "USB/CDM: Buffer overrun has been detected, error is reported by
the USB host"
AA18 000D_E 4 09 00000000000000000000 "USB/CDM: Buffer underrun has been detected, error is reported by
the USB host"
AA18 000F_E 4 09 00000000000000000000 "USB/CDM: Buffer was not accessed, error is reported by the USB
host"
AA18 0010_E 4 09 00000000000000000000 "USB/CDM: FIFO error has been detected, PCI bus latency was too
long"
AA18 0011_E 4 09 00000000000000000000 "USB/CDM: XACT error has been detected, error is reported by the
USB host"
AA18 0012_E 4 09 00000000000000000000 "USB/CDM: Device is babbling, data transfer phase exceeds the
USB frame length"
AA18 0013_E 4 09 00000000000000000000 "USB/CDM: Data buffer error has been detected, error is reported by
the USB host"
AA18 0030_E 4 09 00000000000000000000 "USB/CDM: Endpoint has been halted by the USB bus driver USBD"
AA18 0100_E 4 09 00000000000000000000 "USB/CDM: Memory allocation attempt has failed, error is reported
by the USB bus"

14 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
AA18 0200_E 4 09 00000000000000000000 "USB/CDM: Invalid URB function code has been passed, error is
reported by the USB"
AA18 0300_E 4 09 00000000000000000000 "USB/CDM: Invalid parameter has been passed, error is reported by
the USB bus"
AA18 0400_E 4 09 00000000000000000000 "USB/CDM: There are data transfer requests pending for the device"
AA18 0500_E 4 09 00000000000000000000 "USB/CDM: Request has failed, error is reported by the USB bus
driver USBD"
AA18 0600_E 4 09 00000000000000000000 "USB/CDM: Invalid pipe handle has been passed, error is reported
by the USB bus"
AA18 0700_E 4 09 00000000000000000000 "USB/CDM: There is not enough bandwidth available, error is
reported by the USB bus"
AA18 0800_E 4 09 00000000000000000000 "USB/CDM: Internal host controller error has been detected"
AA18 0900_E 4 09 00000000000000000000 "USB/CDM: Short transfer has been detected, error is reported by
the USB bus"
AA18 0A00_E 4 09 00000000000000000000 "USB/CDM: Bad start frame has been specified, error is reported by
the USB bus"
AA18 0B00_E 4 09 00000000000000000000 "USB/CDM: Asynchronous request has failed, error is reported by
the USB bus driver"
AA18 0C00_E 4 09 00000000000000000000 "USB/CDM: USB frame control is currently owned, error is reported
by the USB bus"
AA18 0D00_E 4 09 00000000000000000000 "USB/CDM: USB frame control is currently not owned, error is
reported by the USB"
AA18 0E00_E 4 09 00000000000000000000 "USB/CDM: Operation is not supported, error is reported by the USB
bus driver"
AA18 0F00_E 4 09 00000000000000000000 "USB/CDM: Invalid configuration descriptor was reported by the
device"
AA18 1000_E 4 09 00000000000000000000 "USB/CDM: Operation has failed, error is reported by the USBIO
driver"
AA18 1001_E 4 09 00000000000000000000 "USB/CDM: Invalid input buffer has been passed to an IOCTL
operation"
AA18 1002_E 4 09 00000000000000000000 "USB/CDM: Invalid output buffer has been passed to an IOCTL
operation"
AA18 1003_E 4 09 00000000000000000000 "USB/CDM: There is not enough system memory available to
complete the operation"
AA18 1004_E 4 09 00000000000000000000 "USB/CDM: There are read or write requests pending, error is
reported by the USBIO"
AA18 1005_E 4 09 00000000000000000000 "USB/CDM: USB device is already configured, error is reported by
the USBIO"
AA18 1006_E 4 09 00000000000000000000 "USB/CDM: The USB device is not configured, error is reported by
the USBIO driver"
AA18 1007_E 4 09 00000000000000000000 "USB/CDM: There are open pipes, error is reported by the USBIO
driver"
AA18 1008_E 4 09 00000000000000000000 "USB/CDM: Either the handle is already bound to a pipe"
AA18 1009_E 4 09 00000000000000000000 "USB/CDM: Handle is not bound to a pipe, error is reported by the
USBIO driver"
AA18 100A_E 4 09 00000000000000000000 "USB/CDM: USB device has been removed from the system"
AA18 100B_E 4 09 00000000000000000000 "USB/CDM: Specified control code is not supported"
AA18 100C_E 4 09 00000000000000000000 "USB/CDM: Operation has been timed out, error is reported by the
USBIO driver"
AA18 100D_E 4 09 00000000000000000000 "USB/CDM: Invalid recipient has been specified"
AA18 100E_E 4 09 00000000000000000000 "USB/CDM: Either an invalid request type has been specified"
AA18 100F_E 4 09 00000000000000000000 "USB/CDM: Invalid IOCTL code has been specified, error is reported
by the USBIO"
AA18 1010_E 4 09 00000000000000000000 "USB/CDM: Direction of the data transfer request is not supported by
that pipe"
AA18 1011_E 4 09 00000000000000000000 "USB/CDM: Number of asynchronous data packets specified in an
asynchronous read"
AA18 1012_E 4 09 00000000000000000000 "USB/CDM: Memory resources are exhausted. This error is reported
by the USBIO driver"
AA18 1013_E 4 09 00000000000000000000 "USB/CDM: The specified pipe was not found in the current configu-
ration"
AA18 1014_E 4 09 00000000000000000000 "USB/CDM: An invalid asynchronous data packet has been
specified"
AA18 1015_E 4 09 00000000000000000000 "USB/CDM: There are not enough system resources to complete the
operation"
AA18 1016_E 4 09 00000000000000000000 "USB/CDM: Specified interface was not found in the current configu-
ration"

U25604-J-Z745-1-7600 May 2011 15

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
AA18 1017_E 4 09 00000000000000000000 "USB/CDM: Operation cannot be executed while the USB device is
in the current state"
AA18 1018_E 4 09 00000000000000000000 "USB/CDM: Invalid parameter has been specified with an IOCTL
operation"
AA18 1019_E 4 09 00000000000000000000 "USB/CDM: Evaluation interval of the USBIO DEMO version has
expired"
AA18 101A_E 4 09 00000000000000000000 "USB/CDM: Invalid power state has been specified"
AA18 101B_E 4 09 00000000000000000000 "USB/CDM: Device has entered a power down state"
AA18 101C_E 4 09 00000000000000000000 "USB/CDM: API version reported by the USBIO driver does not
match"
AA18 101D_E 4 09 00000000000000000000 "USB/CDM: Set configuration operation has failed, error is reported
by the USBIO"
AA18 1080_E 4 09 00000000000000000000 "USB/CDM: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA18 1081_E 4 09 00000000000000000000 "USB/CDM: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA18 1082_E 4 09 00000000000000000000 "USB/CDM: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA18 1083_E 4 09 00000000000000000000 "USB/CDM: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA18 1084_E 4 09 00000000000000000000 "USB/CDM: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA18 1085_E 4 09 00000000000000000000 "USB/CDM: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA18 1086_E 4 09 00000000000000000000 "USB/CDM: The operation has failed due to a restriction of the
USBIO LIGHT version"
AA18 1087_E 4 09 00000000000000000000 "USB/CDM: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA18 1100_E 4 09 00000000000000000000 "USB/CDM: The specified device object does not exist"
AA18 1102_E 4 09 00000000000000000000 "USB/CDM: Device object was opened, there is no valid handle to
execute the operation"
AA18 1104_E 4 09 00000000000000000000 "USB/CDM: Enumeration of the specified devices has failed"
AA18 1105_E 4 09 00000000000000000000 "USB/CDM: Invalid parameter has been passed to a function"
AA18 1106_E 4 09 00000000000000000000 "USB/CDM: Library setupapi.dll could not be loaded"
AA18 2000_E 4 09 00000000000000000000 "USB/CDM: Set configuration request has failed"
AA18 3000_E 4 09 00000000000000000000 "USB/CDM: Buffer is too small, error is reported by the USB bus
driver USBD"
AA18 4000_E 4 09 00000000000000000000 "USB/CDM: Interface was not found, error is reported by the USB
bus driver USBD"
AA18 5000_E 4 09 00000000000000000000 "USB/CDM: Invalid pipe flags have been specified"
AA18 6000_E 4 09 00000000000000000000 "USB/CDM: Operation has been timed out, error is reported by the
USB bus driver"
AA18 7000_E 4 09 00000000000000000000 "USB/CDM: USB device is gone, error is reported by the USB bus
driver USBD"
001D DEFA_W 2 09 00000000000000000000 "DISPENSER NG: DEFAULT_WARNING"
001D DEFA_E 4 09 00000000000000000000 "DISPENSER NG: DEFAULT_ERROR"
001D 1000_E 2 13 1000000000000000000 "DISPENSER FL: Context error, CDM has received an invalid
command"
001D 1001_E 4 09 00000000000000000000 "DISPENSER FL: No response from the CDM"
001D 1010_E 4 09 00000000000000000000 "DISPENSER FL: CDM electronics faulty"
001D 1011_E 4 09 00000000000000000000 "DISPENSER FL: No firmware in CDM"
001D 1012_E 4 09 00000000000000000000 "DISPENSER FL: CDM not completely inserted"
001D 1013_E 4 00 00000000000000000000 "DISPENSER FL: Max number of retracts reached"
001D 1014_E 4 10 00000000000000000000 "DISPENSER FL: Minimum configuration not reached."
001D 1018_E 2 03 01100000000000000000 "DISPENSER FL: Note jam during dispensing"
001D 1019_E 2 12 00000000000000000000 "DISPENSER FL: Money jam in the output transport"
001D 1020_E 4 18 00000000000000000000 "DISPENSER FL: Single reject switch faulty/blocked"
001D 1021_E 4 05 00000000000000000000 "DISPENSER FL: Measuring station faulty"
001D 1022_E 4 05 00000000000000000000 "DISPENSER FL: Photosensor amplifier faulty"
001D 1023_E 4 11 00000000000000000000 "DISPENSER FL: Bundle reject switch faulty"
001D 1024_E 4 07 00000000000000000000 "DISPENSER FL: Reject/retract drive faulty/blocked"
001D 1025_E 2 09 00000000000000000000 "DISPENSER FL: Dispensing drive faulty"
001D 1026_E 2 05 00000000000000000000 "DISPENSER FL: Collecting tray defect"
001D 1028_E 2 05 00000000000000000000 "DISPENSER FL: Money slot/shutter jammed or cannot be opened"
001D 1029_E 3 13 00000000000000000000 "DISPENSER FL: Manipulation during delivery"
001D 1031_E 2 02 00000000000000000000 "DISPENSER FL: Too many bundle rejects (cassette 1)"

16 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
001D 1032_E 2 02 00000000000000000000 "DISPENSER FL: Too many bundle rejects (cassette 2)"
001D 1033_E 2 02 00000000000000000000 "DISPENSER FL: Too many bundle rejects (cassette 3)"
001D 1034_E 2 02 00000000000000000000 "DISPENSER FL: Too many bundle rejects (cassette 4)"
001D 1035_E 2 02 00000000000000000000 "DISPENSER FL: Too many bundle rejects (cassette 5)"
001D 1036_E 2 02 00000000000000000000 "DISPENSER FL: Too many bundle rejects (cassette 6)"
001D 1041_E 2 03 00000000000000000000 "DISPENSER FL: Note extraction impossible (cassette 1)"
001D 1042_E 2 03 00000000000000000000 "DISPENSER FL: Note extraction impossible (cassette 2)"
001D 1043_E 2 03 00000000000000000000 "DISPENSER FL: Note extraction impossible (cassette 3)"
001D 1044_E 2 03 00000000000000000000 "DISPENSER FL: Note extraction impossible (cassette 4)"
001D 1045_E 2 03 00000000000000000000 "DISPENSER FL: Note extraction impossible (cassette 5)"
001D 1046_E 2 03 00000000000000000000 "DISPENSER FL: Note extraction impossible (cassette 6)"
001D 1051_E 2 02 00000000000000000000 "DISPENSER FL: Too many bad notes (cassette 1)"
001D 1052_E 2 02 00000000000000000000 "DISPENSER FL: Too many bad notes (cassette 2)"
001D 1053_E 2 02 00000000000000000000 "DISPENSER FL: Too many bad notes (cassette 3)"
001D 1054_E 2 02 00000000000000000000 "DISPENSER FL: Too many bad notes (cassette 4)"
001D 1055_E 2 02 00000000000000000000 "DISPENSER FL: Too many bad notes (cassette 5)"
001D 1056_E 2 02 00000000000000000000 "DISPENSER FL: Too many bad notes (cassette 6)"
001D 1061_E 2 09 00000000000000000000 "DISPENSER FL: EE-PROM error (cassette 1)"
001D 1062_E 2 09 00000000000000000000 "DISPENSER FL: EE-PROM error (cassette 2)"
001D 1063_E 2 09 00000000000000000000 "DISPENSER FL: EE-PROM error (cassette 3)"
001D 1064_E 2 09 00000000000000000000 "DISPENSER FL: EE-PROM error (cassette 4)"
001D 1065_E 2 09 00000000000000000000 "DISPENSER FL: EE-PROM error (cassette 5)"
001D 1066_E 2 09 00000000000000000000 "DISPENSER FL: EE-PROM error (cassette 6)"
001D 1070_E 2 05 00000000000000000000 "DISPENSER FL: Photosensor measuring station soiled"
001D 1071_E 2 05 00000000000000000000 "DISPENSER FL: Dispenser sensor soiled (cassette 1)"
001D 1072_E 2 05 00000000000000000000 "DISPENSER FL: Dispenser sensor soiled (cassette 2)"
001D 1073_E 2 05 00000000000000000000 "DISPENSER FL: Dispenser sensor soiled (cassette 3)"
001D 1074_E 2 05 00000000000000000000 "DISPENSER FL: Dispenser sensor soiled (cassette 4)"
001D 1075_E 2 05 00000000000000000000 "DISPENSER FL: Dispenser sensor soiled (cassette 5)"
001D 1076_E 2 05 00000000000000000000 "DISPENSER FL: Dispenser sensor soiled (cassette 6)"
001D 1081_E 2 05 00000000000000000000 "DISPENSER FL: Empty sensor soiled (cassette 1)"
001D 1082_E 2 05 00000000000000000000 "DISPENSER FL: Empty sensor soiled (cassette 2)"
001D 1083_E 2 05 00000000000000000000 "DISPENSER FL: Empty sensor soiled (cassette 3)"
001D 1084_E 2 05 00000000000000000000 "DISPENSER FL: Empty sensor soiled (cassette 4)"
001D 1085_E 2 05 00000000000000000000 "DISPENSER FL: Empty sensor soiled (cassette 5)"
001D 1086_E 2 05 00000000000000000000 "DISPENSER FL: Empty sensor soiled (cassette 6)"
001D 1090_E 2 05 00000000000000000000 "DISPENSER FL: Photosensor L1 soiled"
001D 1091_E 2 05 00000000000000000000 "DISPENSER FL: Photosensor L18 soiled"
001D 1093_E 2 05 00000000000000000000 "DISPENSER FL: Photosensor L21 soiled"
001D 1098_E 2 05 00000000000000000000 "DISPENSER FL: Photosensor L27 soiled"
001D 1099_E 2 05 00000000000000000000 "DISPENSER FL: Photosensor L28 soiled"
001D 1800_E 2 05 00000000000000000000 "DISPENSER V4: Context error, CDM has received an invalid
command"
001D 1801_E 4 05 00000000000000000000 "DISPENSER V4: No response from CDM"
001D 1805_E 4 05 00000000000000000000 "DISPENSER V4: Communication problem with the chip card
controller"
001D 1806_E 4 05 00000000000000000000 "DISPENSER V4: Communication problem with the chip card"
001D 1807_E 4 05 00000000000000000000 "DISPENSER V4: Hardware configuration not accepted"
001D 1808_E 4 05 00000000000000000000 "DISPENSER V4: Communication problem with the EE-PROM
collector"
001D 1809_E 4 05 00000000000000000000 "DISPENSER V4: Service switch open, please insert CDM-V4
completely"
001D 1810_E 4 05 00000000000000000000 "DISPENSER V4: CMD electronics faulty"
001D 1811_E 4 05 00000000000000000000 "DISPENSER V4: Software missing in the CMD"
001D 1812_E 4 05 00000000000000000000 "DISPENSER V4: CMD has not been inserted completely"
001D 1813_E 4 00 00000000000000000000 "DISPENSER V4: The maximal number of retracts has been
reached"
001D 1814_E 4 10 00000000000000000000 "DISPENSER V4: Minimum configuration missing"
001D 1817_E 2 09 00000000000000000000 "DISPENSER V4: Gripper belt drive faulty"
001D 1818_E 2 03 01100000000000000000 "DISPENSER V4: Note jam during dispensing"
001D 1819_E 2 09 00000000000000000000 "DISPENSER V4: Gripper transport defective or blocked"
001D 1820_E 4 05 00000000000000000000 "DISPENSER V4: Single reject switch faulty/blocked"
001D 1821_E 4 05 00000000000000000000 "DISPENSER V4: Measuring station faulty"

U25604-J-Z745-1-7600 May 2011 17

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
001D 1822_E 4 05 00000000000000000000 "DISPENSER V4: Photosensor amplifier faulty"
001D 1823_E 4 05 00000000000000000000 "DISPENSER V4: Circle switch faulty/blocked"
001D 1824_E 4 05 00000000000000000000 "DISPENSER V4: Reject/retract drive faulty/blocked"
001D 1825_E 4 05 00000000000000000000 "DISPENSER V4: Dispensing drive faulty/blocked"
001D 1826_E 4 05 00000000000000000000 "DISPENSER V4: Stacker drive faulty /blocked"
001D 1828_E 3 13 00000000000000000000 "DISPENSER V4: Money slot/shutter jammed or cannot be opened"
001D 1829_E 3 13 00000000000000000000 "DISPENSER V4: Manipulation during delivery"
001D 1831_E 2 02 00000000000000000000 "DISPENSER V4: Too many bundle rejects (cassette 1)"
001D 1832_E 2 02 00000000000000000000 "DISPENSER V4: Too many bundle rejects (cassette 2)"
001D 1833_E 2 02 00000000000000000000 "DISPENSER V4: Too many bundle rejects (cassette 3)"
001D 1834_E 2 02 00000000000000000000 "DISPENSER V4: Too many bundle rejects (cassette 4)"
001D 1835_E 2 02 00000000000000000000 "DISPENSER V4: Too many bundle rejects (cassette 5)"
001D 1836_E 2 02 00000000000000000000 "DISPENSER V4: Too many bundle rejects (cassette 6)"
001D 1841_E 2 03 00000000000000000000 "DISPENSER V4: Note extraction impossible (cassette 1)"
001D 1842_E 2 03 00000000000000000000 "DISPENSER V4: Note extraction impossible (cassette 2)"
001D 1843_E 2 03 00000000000000000000 "DISPENSER V4: Note extraction impossible (cassette 3)"
001D 1844_E 2 03 00000000000000000000 "DISPENSER V4: Note extraction impossible (cassette 4)"
001D 1845_E 2 03 00000000000000000000 "DISPENSER V4: Note extraction impossible (cassette 5)"
001D 1846_E 2 03 00000000000000000000 "DISPENSER V4: Note extraction impossible (cassette 6)"
001D 1851_E 2 02 00000000000000000000 "DISPENSER V4: Too many bad notes (cassette 1)"
001D 1852_E 2 02 00000000000000000000 "DISPENSER V4: Too many bad notes (cassette 2)"
001D 1853_E 2 02 00000000000000000000 "DISPENSER V4: Too many bad notes (cassette 3)"
001D 1854_E 2 02 00000000000000000000 "DISPENSER V4: Too many bad notes (cassette 4)"
001D 1855_E 2 02 00000000000000000000 "DISPENSER V4: Too many bad notes (cassette 5)"
001D 1856_E 2 02 00000000000000000000 "DISPENSER V4: Too many bad notes (cassette 6)"
001D 1861_E 2 09 00000000000000000000 "DISPENSER V4: Cassette 1 faulty"
001D 1862_E 2 09 00000000000000000000 "DISPENSER V4: Cassette 2 faulty"
001D 1863_E 2 09 00000000000000000000 "DISPENSER V4: Cassette 3 faulty"
001D 1864_E 2 09 00000000000000000000 "DISPENSER V4: Cassette 4 faulty"
001D 1865_E 2 09 00000000000000000000 "DISPENSER V4: Cassette 5 faulty"
001D 1866_E 2 09 00000000000000000000 "DISPENSER V4: Cassette 6 faulty"
001D 1870_E 2 05 00000000000000000000 "DISPENSER V4: Photosensors measuring station soiled"
001D 1871_E 2 05 00000000000000000000 "DISPENSER V4: Dispenser sensor soiled (cassette 1)"
001D 1872_E 2 05 00000000000000000000 "DISPENSER V4: Dispenser sensor soiled (cassette 2)"
001D 1873_E 2 05 00000000000000000000 "DISPENSER V4: Dispenser sensor soiled (cassette 3)"
001D 1874_E 2 05 00000000000000000000 "DISPENSER V4: Dispenser sensor soiled (cassette 4)"
001D 1875_E 2 05 00000000000000000000 "DISPENSER V4: Dispenser sensor soiled (cassette 5)"
001D 1876_E 2 05 00000000000000000000 "DISPENSER V4: Dispenser sensor soiled (cassette 6)"
001D 1881_E 2 05 00000000000000000000 "DISPENSER V4: Empty sensor soiled (cassette 1)"
001D 1882_E 2 05 00000000000000000000 "DISPENSER V4: Empty sensor soiled (cassette 2)"
001D 1883_E 2 05 00000000000000000000 "DISPENSER V4: Empty sensor soiled (cassette 3)"
001D 1884_E 2 05 00000000000000000000 "DISPENSER V4: Empty sensor soiled (cassette 4)"
001D 1885_E 2 05 00000000000000000000 "DISPENSER V4: Empty sensor soiled (cassette 5)"
001D 1886_E 2 05 00000000000000000000 "DISPENSER V4: Empty sensor soiled (cassette 6)"
001D 1890_E 2 05 00000000000000000000 "DISPENSER V4: Photosensor L1 soiled"
001D 1891_E 2 05 00000000000000000000 "DISPENSER V4: Photosensor L18 soiled"
001D 1893_E 2 05 00000000000000000000 "DISPENSER V4: Control tray single reject L2 soiled"
001D 1895_E 2 05 00000000000000000000 "DISPENSER V4: Money taken light barrier L26/L27 soiled"
001D 1898_E 2 05 00000000000000000000 "DISPENSER V4: Withdrawal photosensor L27 soiled"
001D 1899_E 2 05 00000000000000000000 "DISPENSER V4: Output photosensor L28 soiled"
001D 189A_E 2 05 00000000000000000000 "DISPENSER V4: Light barrier of bundle back edge control
(presenter) soiled"
001D 189D_E 2 05 00000000000000000000 "DISPENSER V4: Light barrier L2 of reject bin soiled"
001D 189E_E 2 05 00000000000000000000 "DISPENSER V4: Light barrier L3 of reject bin soiled"
001D 4001_E 4 09 00000000000000000000 "DISPENSER NG: No response from the CDM"
001D 4010_E 4 09 00000000000000000000 "DISPENSER NG: CDM electronics faulty"
001D 4011_E 4 09 00000000000000000000 "DISPENSER NG: Software missing in the CDM"
001D 4012_E 4 09 00000000000000000000 "DISPENSER NG: CDM has not been inserted completely"
001D 4013_E 4 00 00000000000000000000 "DISPENSER NG: Max number of retracts reached"
001D 4018_E 2 03 01100000000000000000 "DISPENSER NG: Note jam during dispensing"
001D 4020_E 2 05 00000000000000000000 "DISPENSER NG: Single reject switch faulty/blocked"
001D 4021_E 4 05 00000000000000000000 "DISPENSER NG: Measuring station faulty"

18 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
001D 4022_E 4 05 00000000000000000000 "DISPENSER NG: Photosensor amplifier faulty"
001D 4025_E 2 03 00000000000000000000 "DISPENSER NG: Dispensing drive faulty/blocked"
001D 4026_E 2 03 00000000000000000000 "DISPENSER NG: Switching dispensing/transport"
001D 4100_E 2 05 00000000000000000000 "DISPENSER NG: Cassette unknown, missing, reinserted"
001D 4114_E 4 07 00000000000000000000 "DISPENSER NG: Reject cassette missing"
001D 4119_E 2 12 00000000000000000000 "DISPENSER NG: Money jam in the output transport"
001D 4123_E 4 12 00000000000000000000 "DISPENSER NG: Bundle reject switch faulty/blocked"
001D 4124_E 4 07 00000000000000000000 "DISPENSER NG: Reject/retract drive faulty/blocked"
001D 4128_E 2 12 00000000000000000000 "DISPENSER NG: Shutter cannot be opened/defect"
001D 4129_E 3 13 00000000000000000000 "DISPENSER NG: Manipulation during delivery"
001D 4200_E 3 14 00000000000000000000 "DISPENSER NG: Shutter has been blocked"
001D 4214_E 4 07 00000000000000000000 "DISPENSER NG: Reject cassette not logged on"
001D 4219_E 2 18 00000000000000000000 "DISPENSER NG: Money jam in the output transport"
001D 4223_E 2 18 00000000000000000000 "DISPENSER NG: Bundle reject switch faulty/blocked"
001D 4224_E 2 18 00000000000000000000 "DISPENSER NG: Reject/retract drive faulty/blocked"
001D 4228_E 2 13 00000000000000000000 "DISPENSER NG: Shutter undefined"
001D 4229_E 3 18 00000000000000000000 "DISPENSER NG: Manipulation in withdrawal position"
001D 4300_E 2 13 00000000000000000000 "DISPENSER NG: Command cannot be executed while Shutter
open"
001D 4314_E 2 01 00000000000000000000 "DISPENSER NG: Cash-out cassette(s) missing"
001D 4319_E 2 04 00000000000000000000 "DISPENSER NG: Money jam in the output transport"
001D 4328_E 2 13 00000000000000000000 "DISPENSER NG: Shutter cannot be closed/undefined"
001D 4329_E 2 30 00000000000000000000 "DISPENSER NG: Manipulation during retract"
001D 4400_E 2 13 00000000000000000000 "DISPENSER NG: Command cannot be executed while Shutter
undefined"
001D 4414_E 2 40 00000000000000000000 "DISPENSER NG: No cash-out cassette(s) logged on"
001D 4419_E 2 18 00000000000000000000 "DISPENSER NG: Money jam in the output transport"
001D 4428_E 2 30 00000000000000000000 "DISPENSER NG: Shutter undefined during retract"
001D 4429_E 3 18 00000000000000000000 "DISPENSER NG: Manipulation during delivery"
001D 4500_E 2 18 00000000000000000000 "DISPENSER NG: Manipulation at cash-out photosensor"
001D 4519_E 2 18 00000000000000000000 "DISPENSER NG: Money jam in the output transport"
001D 4529_E 2 18 00000000000000000000 "DISPENSER NG: Manipulation during delivery"
001D 4600_E 2 05 00000000000000000000 "DISPENSER NG: Note paths blocked"
001D 4619_E 2 18 00000000000000000000 "DISPENSER NG: Money jam in the output transport"
001D 4629_E 2 13 00000000000000000000 "DISPENSER NG: Manipulation in withdrawal position"
001D 4700_E 2 10 00000000000000000000 "DISPENSER NG: Max number of retracts reached"
001D 4719_E 2 18 00000000000000000000 "DISPENSER NG: Money jam in the output transport"
001D 4729_E 2 13 00000000000000000000 "DISPENSER NG: Manipulation during retract"
001D 4800_E 2 02 00000000000000000000 "DISPENSER NG: Single reject switch faulty"
001D 4829_E 2 14 00000000000000000000 "DISPENSER NG: Manipulation during delivery"
001D 4900_E 2 41 00000000000000000000 "DISPENSER NG: Self-test activated"
001D 4919_E 2 18 00000000000000000000 "DISPENSER NG: Photosensor covered during withdrawal"
001D 4A00_E 4 03 00000000000000000000 "DISPENSER NG: The jam was not eliminated effectively"
001D 4A19_E 2 18 00000000000000000000 "DISPENSER NG: Photosensor covered during withdrawal"
001D 4B00_E 2 01 00000000000000000000 "DISPENSER NG: Cash-out cassette missing"
001D 4B19_E 2 19 00000000000000000000 "DISPENSER NG: Photosensor covered during retract"
001D 4C19_E 4 29 00000000000000000000 "DISPENSER NG: Motor defect"
001D 4D00_E 2 04 00000000000000000000 "DISPENSER NG: Cassette is empty"
001D 4E00_E 2 01 00000000000000000000 "DISPENSER NG: Cassette or dispensing sensor defect"
001D 4F00_E 2 04 00000000000000000000 "DISPENSER NG: Cassette becomes empty during dispensing
procedure"
001D 8031_E 2 02 00000000000000000000 "DISPENSER NG: Too many bundle rejects (cassette 1)"
001D 8032_E 2 02 00000000000000000000 "DISPENSER NG: Too many bundle rejects (cassette 2)"
001D 8033_E 2 02 00000000000000000000 "DISPENSER NG: Too many bundle rejects (cassette 3)"
001D 8034_E 2 02 00000000000000000000 "DISPENSER NG: Too many bundle rejects (cassette 4)"
001D 8035_E 2 02 00000000000000000000 "DISPENSER NG: Too many bundle rejects (cassette 5)"
001D 8036_E 2 02 00000000000000000000 "DISPENSER NG: Too many bundle rejects (cassette 6)"
001D 8041_E 2 03 00000000000000000000 "DISPENSER NG: Note extraction impossible (cassette 1)"
001D 8042_E 2 03 00000000000000000000 "DISPENSER NG: Note extraction impossible (cassette 2)"
001D 8043_E 2 03 00000000000000000000 "DISPENSER NG: Note extraction impossible (cassette 3)"
001D 8044_E 2 03 00000000000000000000 "DISPENSER NG: Note extraction impossible (cassette 4)"
001D 8045_E 2 03 00000000000000000000 "DISPENSER NG: Note extraction impossible (cassette 5)"

U25604-J-Z745-1-7600 May 2011 19

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
001D 8046_E 2 03 00000000000000000000 "DISPENSER NG: Note extraction impossible (cassette 6)"
001D 8061_E 2 09 00000000000000000000 "DISPENSER NG: Cassette 1 faulty"
001D 8062_E 2 09 00000000000000000000 "DISPENSER NG: Cassette 2 faulty"
001D 8063_E 2 09 00000000000000000000 "DISPENSER NG: Cassette 3 faulty"
001D 8064_E 2 09 00000000000000000000 "DISPENSER NG: Cassette 4 faulty"
001D 8065_E 2 09 00000000000000000000 "DISPENSER NG: Cassette 5 faulty"
001D 8066_E 2 09 00000000000000000000 "DISPENSER NG: Cassette 6 faulty"
001D 8070_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor measuring station soiled"
001D 8071_E 2 05 00000000000000000000 "DISPENSER NG: Dispenser sensor soiled (cassette 1)"
001D 8072_E 2 05 00000000000000000000 "DISPENSER NG: Dispenser sensor soiled (cassette 2)"
001D 8073_E 2 05 00000000000000000000 "DISPENSER NG: Dispenser sensor soiled (cassette 3)"
001D 8074_E 2 05 00000000000000000000 "DISPENSER NG: Dispenser sensor soiled (cassette 4)"
001D 8075_E 2 05 00000000000000000000 "DISPENSER NG: Dispenser sensor soiled (cassette 5)"
001D 8076_E 2 05 00000000000000000000 "DISPENSER NG: Dispenser sensor soiled (cassette 6)"
001D 8081_E 2 05 00000000000000000000 "DISPENSER NG: Empty sensor soiled (cassette 1)"
001D 8082_E 2 05 00000000000000000000 "DISPENSER NG: Empty sensor soiled (cassette 2)"
001D 8083_E 2 05 00000000000000000000 "DISPENSER NG: Empty sensor soiled (cassette 3)"
001D 8084_E 2 05 00000000000000000000 "DISPENSER NG: Empty sensor soiled (cassette 4)"
001D 8085_E 2 05 00000000000000000000 "DISPENSER NG: Empty sensor soiled (cassette 5)"
001D 8086_E 2 05 00000000000000000000 "DISPENSER NG: Empty sensor soiled (cassette 6)"
001D 8090_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L1 soiled"
001D 8091_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L18 soiled"
001D 8092_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L19 soiled"
001D 8093_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L21 soiled"
001D 8094_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L22 soiled"
001D 8095_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L26 soiled"
001D 8096_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L33 soiled"
001D 8097_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L35 soiled"
001D 8098_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L27 soiled"
001D 8099_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L28 soiled"
001D 809A_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L29 soiled"
001D 809B_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L36 soiled"
001D 809C_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L37 soiled"
001D 8151_E 2 02 00000000000000000000 "DISPENSER NG: Too many double notes (cassette 1)"
001D 8152_E 2 02 00000000000000000000 "DISPENSER NG: Too many double notes (cassette 2)"
001D 8153_E 2 02 00000000000000000000 "DISPENSER NG: Too many double notes (cassette 3)"
001D 8154_E 2 02 00000000000000000000 "DISPENSER NG: Too many double notes (cassette 4)"
001D 8155_E 2 02 00000000000000000000 "DISPENSER NG: Too many double notes (cassette 5)"
001D 8156_E 2 02 00000000000000000000 "DISPENSER NG: Too many double notes (cassette 6)"
001D 8251_E 2 02 00000000000000000000 "DISPENSER NG: Too many bad notes (cassette 1)"
001D 8252_E 2 02 00000000000000000000 "DISPENSER NG: Too many bad notes (cassette 2)"
001D 8253_E 2 02 00000000000000000000 "DISPENSER NG: Too many bad notes (cassette 3)"
001D 8254_E 2 02 00000000000000000000 "DISPENSER NG: Too many bad notes (cassette 4)"
001D 8255_E 2 02 00000000000000000000 "DISPENSER NG: Too many bad notes (cassette 5)"
001D 8256_E 2 02 00000000000000000000 "DISPENSER NG: Too many bad notes (cassette 6)"
001D 8300_E 2 11 00000000000000000000 "DISPENSER NG: Bills left in stacker after output to diverter"
001D 8312_E 2 09 00000000000000000000 "DISPENSER NG: CDM has not been inserted completely"
001D 8313_E 2 11 00000000000000000000 "DISPENSER NG: Cash left in diverter after reset/booting"
001D 8314_E 2 11 00000000000000000000 "DISPENSER NG: Dispensing not possible"
001D 8315_E 2 11 00000000000000000000 "DISPENSER NG: Command could not be executed"
001D 8316_E 2 11 00000000000000000000 "DISPENSER NG: Command could not be executed"
001D 8318_E 2 11 00000000000000000000 "DISPENSER NG: Note jam during dispense operation"
001D 8319_E 2 11 00000000000000000000 "DISPENSER NG: Note jam in the output transport"
001D 8320_E 2 11 00000000000000000000 "DISPENSER NG: Single reject switch faulty/blocked"
001D 8321_E 2 05 00000000000000000000 "DISPENSER NG: Measuring station faulty"
001D 8322_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor amplifier faulty"
001D 8323_E 2 11 00000000000000000000 "DISPENSER NG: Bundle reject switch faulty/blocked"
001D 8324_E 2 11 00000000000000000000 "DISPENSER NG: Reject/retract drive faulty/blocked"
001D 8325_E 2 11 00000000000000000000 "DISPENSER NG: Dispensing drive faulty/blocked"
001D 8326_E 2 11 00000000000000000000 "DISPENSER NG: Switching dispensing/transport faulty"
001D 8328_E 2 05 00000000000000000000 "DISPENSER NG: Diverter does not reach the end position"

20 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
001D 8329_E 2 05 00000000000000000000 "DISPENSER NG: Bills jammed in stacker, under output photo-
sensor"
001D 8331_E 2 02 00000000000000000000 "DISPENSER NG: Too many bundle rejects (casette 1)"
001D 8332_E 2 02 00000000000000000000 "DISPENSER NG: Too many bundle rejects (casette 2)"
001D 8333_E 2 02 00000000000000000000 "DISPENSER NG: Too many bundle rejects (casette 3)"
001D 8334_E 2 02 00000000000000000000 "DISPENSER NG: Too many bundle rejects (casette 4)"
001D 8335_E 2 02 00000000000000000000 "DISPENSER NG: Too many bundle rejects (casette 5)"
001D 8336_E 2 02 00000000000000000000 "DISPENSER NG: Too many bundle rejects (casette 6)"
001D 8341_E 2 11 00000000000000000000 "DISPENSER NG: Note extraction impossible (cassette 1)"
001D 8342_E 2 11 00000000000000000000 "DISPENSER NG: Note extraction impossible (cassette 2)"
001D 8343_E 2 11 00000000000000000000 "DISPENSER NG: Note extraction impossible (cassette 3)"
001D 8344_E 2 11 00000000000000000000 "DISPENSER NG: Note extraction impossible (cassette 4)"
001D 8345_E 2 11 00000000000000000000 "DISPENSER NG: Note extraction impossible (cassette 5)"
001D 8346_E 2 11 00000000000000000000 "DISPENSER NG: Note extraction impossible (cassette 6)"
001D 8351_E 2 02 00000000000000000000 "DISPENSER NG: Too many double notes (cassette 1)"
001D 8352_E 2 02 00000000000000000000 "DISPENSER NG: Too many double notes (cassette 2)"
001D 8353_E 2 02 00000000000000000000 "DISPENSER NG: Too many double notes (cassette 3)"
001D 8354_E 2 02 00000000000000000000 "DISPENSER NG: Too many double notes (cassette 4)"
001D 8355_E 2 02 00000000000000000000 "DISPENSER NG: Too many double notes (cassette 5)"
001D 8356_E 2 02 00000000000000000000 "DISPENSER NG: Too many double notes (cassette 6)"
001D 8361_E 2 05 00000000000000000000 "DISPENSER NG: Cassette 1 faulty"
001D 8362_E 2 05 00000000000000000000 "DISPENSER NG: Cassette 2 faulty"
001D 8363_E 2 05 00000000000000000000 "DISPENSER NG: Cassette 3 faulty"
001D 8364_E 2 05 00000000000000000000 "DISPENSER NG: Cassette 4 faulty"
001D 8365_E 2 05 00000000000000000000 "DISPENSER NG: Cassette 5 faulty"
001D 8366_E 2 05 00000000000000000000 "DISPENSER NG: Cassette 6 faulty"
001D 8370_E 2 05 00000000000000000000 "DISPENSER NG: Photosensors measuring station soiled"
001D 8371_E 2 05 00000000000000000000 "DISPENSER NG: Dispenser sensor soiled (cassette 1)"
001D 8372_E 2 05 00000000000000000000 "DISPENSER NG: Dispenser sensor soiled (cassette 2)"
001D 8373_E 2 05 00000000000000000000 "DISPENSER NG: Dispenser sensor soiled (cassette 3)"
001D 8374_E 2 05 00000000000000000000 "DISPENSER NG: Dispenser sensor soiled (cassette 4)"
001D 8375_E 2 05 00000000000000000000 "DISPENSER NG: Dispenser sensor soiled (cassette 5)"
001D 8376_E 2 05 00000000000000000000 "DISPENSER NG: Dispenser sensor soiled (cassette 6)"
001D 8381_E 2 05 00000000000000000000 "DISPENSER NG: Empty sensor soiled (cassette 1)"
001D 8382_E 2 05 00000000000000000000 "DISPENSER NG: Empty sensor soiled (cassette 2)"
001D 8383_E 2 05 00000000000000000000 "DISPENSER NG: Empty sensor soiled (cassette 3)"
001D 8384_E 2 05 00000000000000000000 "DISPENSER NG: Empty sensor soiled (cassette 4)"
001D 8385_E 2 05 00000000000000000000 "DISPENSER NG: Empty sensor soiled (cassette 5)"
001D 8386_E 2 05 00000000000000000000 "DISPENSER NG: Empty sensor soiled (cassette 6)"
001D 8390_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L1 soiled"
001D 8391_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L18 soiled"
001D 8392_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L19 soiled"
001D 8393_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L21 soiled"
001D 8394_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L22 soiled"
001D 8395_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L26 soiled"
001D 8396_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L33 soiled"
001D 8397_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L35 soiled"
001D 8398_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L27 soiled"
001D 8399_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L28 soiled"
001D 839A_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L29 soiled"
001D 839B_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L36 soiled"
001D 839C_E 2 05 00000000000000000000 "DISPENSER NG: Photosensor L37 soiled"
001D 8400_E 2 05 00000000000000000000 "DISPENSER NG: Banknotes left in the stacker after output"
001D 8419_E 2 05 00000000000000000000 "DISPENSER NG: Note jam in the output transport"
001D A000_E 2 09 00000000000000000000 "DISPENSER NG: Wrong command"
001D A100_E 2 09 00000000000000000000 "DISPENSER NG: Wrong command"
001D A200_E 2 09 00000000000000000000 "DISPENSER NG: Programming error"
001D FE38_E 4 09 00000000000000000000 "DISPENSER NG: Communication problem"
001D FE50_E 4 09 00000000000000000000 "DISPENSER NG: Communication problem"
001D FFFF_E 2 09 00000000000000000000 "DISPENSER NG: Extended error code not computed"
001D DEFA_W 2 09 00000000000000000000 "DISPENSER CRS: DEFAULT_WARNING"
001D DEFA_E 4 09 00000000000000000000 "DISPENSER CRS: DEFAULT_ERROR"

U25604-J-Z745-1-7600 May 2011 21

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
001D 3000_E 4 09 00000000000000000000 "DISPENSER CRS: Context error"
001D 3010_E 4 09 00000000000000000000 "DISPENSER CRS: No response from CRS"
001D 3016_E 4 09 00000000000000000000 "DISPENSER CRS: CRS electronics faulty"
001D 3020_E 2 09 00000000000000000000 "DISPENSER CRS: CRS communication problem"
001D 3025_E 2 09 00000000000000000000 "DISPENSER CRS: CRS communication problem"
001D 3100_E 4 09 00000000000000000000 "DISPENSER CRS: CRS controller error"
001D 3101_E 4 09 00000000000000000000 "DISPENSER CRS: CRS controller error"
001D 3105_E 4 09 00000000000000000000 "DISPENSER CRS: CRS controller error"
001D 3106_E 4 09 00000000000000000000 "DISPENSER CRS: CRS controller error"
001D 3110_E 4 09 00000000000000000000 "DISPENSER CRS: Software missing in CRS"
001D 3120_E 4 09 00000000000000000000 "DISPENSER CRS: CRS has not been inserted completely"
001D 3125_E 2 00 00000000000000000000 "DISPENSER CRS: Front or rear door not closed"
001D 3135_E 4 00 00000000000000000000 "DISPENSER CRS: Max number of retracts reached"
001D 3136_E 4 03 00000000000000000000 "DISPENSER CRS: Device lock after jam"
001D 3137_E 2 01 00000000000000000000 "DISPENSER CRS: CashIn box for level 3 notes overfilled"
001D 3140_E 4 10 00000000000000000000 "DISPENSER CRS: Minimum configuration cash-out not reached."
001D 3145_E 0 08 00000000000000000000 "DISPENSER CRS: Minimum configuration cash-in not reached."
001D 3146_E 4 08 00000000000000000000 "DISPENSER CRS: Minimum configuration BIM not reached."
001D 3170_E 2 01 00000000000000000000 "DISPENSER CRS: Money jam during cash-in"
001D 3171_E 2 01 00000000000000000000 "DISPENSER CRS: Money jam during cash-in"
001D 3175_E 2 01 00000000000000000000 "DISPENSER CRS: Money jam during cash-in"
001D 3176_E 2 01 00000000000000000000 "DISPENSER CRS: Money jam during cash-in"
001D 3178_E 2 01 00000000000000000000 "DISPENSER CRS: Money jam during cash-in"
001D 3179_E 2 01 00000000000000000000 "DISPENSER CRS: Money jam during cash-in"
001D 3180_E 2 12 00000000000000000000 "DISPENSER CRS: Money jam during cash-out"
001D 3181_E 2 12 00000000000000000000 "DISPENSER CRS: Money jam during cash-out"
001D 3182_E 2 12 00000000000000000000 "DISPENSER CRS: Money jam during reject/retract"
001D 3185_E 2 03 01100000000000000000 "DISPENSER CRS: Note jam during cash-out"
001D 3186_E 2 12 00000000000000000000 "DISPENSER CRS: Money jam during bundle reject"
001D 3187_E 2 12 00000000000000000000 "DISPENSER CRS: Money jam during retract"
001D 3200_E 2 00 80000000000000000000 "DISPENSER CRS: Switch cash-in cassette 1 faulty"
001D 3201_E 2 00 80000000000000000000 "DISPENSER CRS: Switch cash-in cassette 2 faulty"
001D 3202_E 2 00 80000000000000000000 "DISPENSER CRS: Switch cash-in cassette 3 faulty"
001D 3203_E 2 00 80000000000000000000 "DISPENSER CRS: Switch cash-in cassette 4 faulty"
001D 3204_E 2 00 80000000000000000000 "DISPENSER CRS: Switch cash-in cassette 5 faulty"
001D 3205_E 4 05 00000000000000000000 "DISPENSER CRS: Switch safe delivery/escrow/cash-out tray faulty/
blocked"
001D 3206_E 4 05 00000000000000000000 "DISPENSER CRS: Single reject switch faulty/blocked"
001D 3207_E 2 01 00000000000000000000 "DISPENSER CRS: Switch escrow (MA6) faulty/blocked"
001D 3210_E 4 05 00000000000000000000 "DISPENSER CRS: Measuring station faulty"
001D 3214_E 4 05 00000000000000000000 "DISPENSER CRS: Tape sensor in BIM module reports error"
001D 3215_E 4 05 00000000000000000000 "DISPENSER CRS: Measuring station faulty"
001D 3216_E 3 08 00000000000000000000 "DISPENSER CRS: BIM soiled or faulty"
001D 3217_E 3 08 00000000000000000000 "DISPENSER CRS: BIM communication reader faulty"
001D 3218_E 3 08 00000000000000000000 "DISPENSER CRS: BIM note impulses missing or out of tolerance"
001D 3219_E 3 08 00000000000000000000 "DISPENSER CRS: BIM reports an acknowledgement error"
001D 3220_E 4 05 00000000000000000000 "DISPENSER CRS: Photosensor amplifier faulty"
001D 3230_E 4 05 00000000000000000000 "DISPENSER CRS: Retract switch (MA4) faulty/blocked"
001D 3231_E 4 05 00000000000000000000 "DISPENSER CRS: Selection switch faulty/blocked"
001D 3232_E 4 05 00000000000000000000 "DISPENSER CRS: Single reject switch faulty/blocked"
001D 3250_E 4 03 00000000000000000000 "DISPENSER CRS: Transport motor M1 faulty/blocked"
001D 3255_E 4 03 00000000000000000000 "DISPENSER CRS: Transport motor M2 faulty/blocked"
001D 3256_E 4 03 00000000000000000000 "DISPENSER CRS: Transport motor M3 faulty/blocked"
001D 3285_E 2 13 10000000000000000000 "DISPENSER CRS: Shutter error"
001D 3286_E 2 04 00000000000000000000 "DISPENSER CRS: Shutter error cash-in tray"
001D 3287_E 2 13 10000000000000000000 "DISPENSER CRS: Beater in cash-out tray blocked"
001D 3295_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor cash-out tray covered"
001D 3296_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor filling tray covered"
001D 3310_E 2 02 00000000000000000000 "DISPENSER CRS: Too many bundle rejects (cassette 1)"
001D 3320_E 2 02 00000000000000000000 "DISPENSER CRS: Too many bundle rejects (cassette 2)"
001D 3330_E 2 02 00000000000000000000 "DISPENSER CRS: Too many bundle rejects (cassette 3)"
001D 3340_E 2 02 00000000000000000000 "DISPENSER CRS: Too many bundle rejects (cassette 4)"

22 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
001D 3405_E 2 18 00000000000000000000 "DISPENSER CRS: Extraction from filling tray impossible"
001D 3406_E 4 18 00000000000000000000 "DISPENSER CRS: Extraction from cash-out tray impossible"
001D 3407_E 2 19 00000000000000000000 "DISPENSER CRS: Metal detection in input tray"
001D 3408_E 2 04 00000000000000000000 "DISPENSER CRS: Input shutter not closed"
001D 3410_E 2 03 00000000000000000000 "DISPENSER CRS: Note extraction impossible (cassette 1)"
001D 3411_E 2 03 00000000000000000000 "DISPENSER CRS: Note extraction impossible (roller 1)"
001D 3420_E 2 03 00000000000000000000 "DISPENSER CRS: Note extraction impossible (cassette 2)"
001D 3421_E 2 03 00000000000000000000 "DISPENSER CRS: Note extraction impossible (roller 2)"
001D 3430_E 2 03 00000000000000000000 "DISPENSER CRS: Note extraction impossible (cassette 3)"
001D 3431_E 2 03 00000000000000000000 "DISPENSER CRS: Note extraction impossible (roller 3)"
001D 3440_E 2 03 00000000000000000000 "DISPENSER CRS: Note extraction impossible (cassette 4)"
001D 3441_E 2 03 00000000000000000000 "DISPENSER CRS: Note extraction impossible (roller 4)"
001D 3451_E 2 03 00000000000000000000 "DISPENSER CRS: Note extraction impossible (roller 5)"
001D 3461_E 2 03 00000000000000000000 "DISPENSER CRS: Note extraction impossible (roller 6)"
001D 3510_E 2 02 00000000000000000000 "DISPENSER CRS: Too many bad notes (cassette 1)"
001D 3520_E 2 02 00000000000000000000 "DISPENSER CRS: Too many bad notes (cassette 2)"
001D 3530_E 2 02 00000000000000000000 "DISPENSER CRS: Too many bad notes (cassette 3)"
001D 3540_E 2 02 00000000000000000000 "DISPENSER CRS: Too many bad notes (cassette 4)"
001D 3605_E 2 08 00000000000000000000 "DISPENSER CRS: ESCROW faulty"
001D 3606_E 2 08 00000000000000000000 "DISPENSER CRS: ESCROW, beginning of tape not found or not
leave "
001D 3607_E 2 08 00000000000000000000 "DISPENSER CRS: Internal ESCROW error"
001D 3608_E 2 08 00000000000000000000 "DISPENSER CRS: Wrong values from ESCROW impulse channel"
001D 3610_E 2 09 00000000000000000000 "DISPENSER CRS: Cassette 1 faulty"
001D 3611_E 2 09 00000000000000000000 "DISPENSER CRS: Roller 1 faulty"
001D 3620_E 2 09 00000000000000000000 "DISPENSER CRS: Cassette 2 faulty"
001D 3621_E 2 09 00000000000000000000 "DISPENSER CRS: Roller 2 faulty"
001D 3630_E 2 09 00000000000000000000 "DISPENSER CRS: Cassette 3 faulty"
001D 3631_E 2 09 00000000000000000000 "DISPENSER CRS: Roller 3 faulty"
001D 3640_E 2 09 00000000000000000000 "DISPENSER CRS: Cassette 4 faulty"
001D 3641_E 2 09 00000000000000000000 "DISPENSER CRS: Roller 4 faulty"
001D 3651_E 2 09 00000000000000000000 "DISPENSER CRS: Roller 5 faulty"
001D 3661_E 2 09 00000000000000000000 "DISPENSER CRS: Roller 6 faulty"
001D 3700_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor thickness measuring station (safe
module) soiled"
001D 3705_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor thickness measuring station
(counter area) soiled"
001D 3710_E 2 05 00000000000000000000 "DISPENSER CRS: Dispenser sensor soiled (cassette 1)"
001D 3720_E 2 05 00000000000000000000 "DISPENSER CRS: Dispenser sensor soiled (cassette 2)"
001D 3730_E 2 05 00000000000000000000 "DISPENSER CRS: Dispenser sensor soiled (cassette 3)"
001D 3740_E 2 05 00000000000000000000 "DISPENSER CRS: Dispenser sensor soiled (cassette 4)"
001D 3810_E 2 05 00000000000000000000 "DISPENSER CRS: Empty sensor soiled (cassette 1)"
001D 3820_E 2 05 00000000000000000000 "DISPENSER CRS: Empty sensor soiled (cassette 2)"
001D 3830_E 2 05 00000000000000000000 "DISPENSER CRS: Empty sensor soiled (cassette 3)"
001D 3840_E 2 05 00000000000000000000 "DISPENSER CRS: Empty sensor soiled (cassette 4)"
001D 3901_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L1 soiled"
001D 3902_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L2 soiled"
001D 3903_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L3 soiled"
001D 3904_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L4 soiled"
001D 3905_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L5 soiled"
001D 3906_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L6 soiled"
001D 3907_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L27 soiled"
001D 3908_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L8 soiled"
001D 3909_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L9 soiled"
001D 3910_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L10 soiled"
001D 3911_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L11 soiled"
001D 3912_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L12 soiled"
001D 3913_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L13 soiled"
001D 3914_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L14 soiled"
001D 3915_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L15 soiled"
001D 3916_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L16 soiled"
001D 3917_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L17 soiled"

U25604-J-Z745-1-7600 May 2011 23

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
001D 3918_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L18 soiled"
001D 3919_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L19 soiled"
001D 3920_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L20 soiled"
001D 3921_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L21 soiled"
001D 3922_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L22 soiled"
001D 3923_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L23 soiled"
001D 3924_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L24 soiled"
001D 3925_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L25 soiled"
001D 3926_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor L26 soiled"
001D 3931_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor roller 1 soiled"
001D 3932_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor roller 2 soiled"
001D 3933_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor roller 3 soiled"
001D 3934_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor roller 4 soiled"
001D 3935_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor roller 5 soiled"
001D 3936_E 2 05 00000000000000000000 "DISPENSER CRS: Photosensor roller 6 soiled"
001D 3941_E 2 09 00000000000000000000 "DISPENSER CRS: Filled roller 1 not placed in the right position, or
voltage missing"
001D 3942_E 2 09 00000000000000000000 "DISPENSER CRS: Filled roller 2 not placed in the right position, or
voltage missing"
001D 3943_E 2 09 00000000000000000000 "DISPENSER CRS: Filled roller 3 not placed in the right position, or
voltage missing"
001D 3944_E 2 09 00000000000000000000 "DISPENSER CRS: Filled roller 4 not placed in the right position, or
voltage missing"
001D 3945_E 2 09 00000000000000000000 "DISPENSER CRS: Filled roller 5 not placed in the right position, or
voltage missing"
001D 3946_E 2 09 00000000000000000000 "DISPENSER CRS: Filled roller 6 not placed in the right position, or
voltage missing"
001D A000_E 2 09 00000000000000000000 "DISPENSER CRS: Wrong command"
001D A100_E 2 09 00000000000000000000 "DISPENSER CRS: Wrong command"
001D A200_E 2 09 00000000000000000000 "DISPENSER CRS: Programming error"
001D 3F03_E 2 09 00000000000000000000 "DISPENSER CRS: Security thread sensor missing, or not installed"
001D FE38_E 4 09 00000000000000000000 "DISPENSER CRS: Communication problem"
001D FE50_E 4 09 00000000000000000000 "DISPENSER CRS: Communication problem"
001D FFFF_E 2 09 00000000000000000000 "DISPENSER CRS: Extended error code not computed"

24 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

CRS NG (Classes: 0018_CIN/AA18_CIN/001D_CIN)

The following table lists the M-Status and M-Data codes assigned to the device
classes of the CRS NG that will be internally mapped to _CIN classes if the error
has occurred during a cash in transaction. Error codes of class "0018_CIN" are
basic errors. Class AA18_CIN is the USB class assigned to the Cash Dispenser
device. Error codes of class "001D_CIN" are extended errors.

Refer to section ”Error Class Mapping” on page 5.

Table 5: Cash In NG (Classes: 0018_CIN/AA18_CIN/001D_CIN))

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0018_CIN DEFA_W 2 99 0018DEFA000000000000 "CASHIN NG: DEFAULT_WARNING"
0018_CIN DEFA_E 4 99 0018DEFA000000000000 "CASHIN NG: DEFAULT_ERROR"
0018_CIN E000_W 2 99 0018E000000000000000 "CASHIN NG: No banknotes taken by the customer"
0018_CIN E000_E 2 99 0018E000000000000000 "CASHIN NG: No banknotes taken by the customer"
0018_CIN E001_W 1 99 0018E001000000000000 "CASHIN NG: All banknotes taken by the customer"
0018_CIN E001_E 1 99 0018E001000000000000 "CASHIN NG: All banknotes taken by the customer"
0018_CIN E002_W 1 99 0018E002000000000000 "CASHIN NG: Firmware on disk is newer than SW loaded in
CDM-NG"
0018_CIN E002_E 1 99 0018E002000000000000 "CASHIN NG: Firmware on disk is newer than SW loaded in
CDM-NG"
0018_CIN E003_W 1 99 0018E003000000000000 "CASHIN NG: There is no firmware loaded in the CDM-NG"
0018_CIN E003_E 1 99 0018E003000000000000 "CASHIN NG: There is no firmware loaded in the CDM-NG"
0018_CIN E004_W 1 99 0018E004000000000000 "CASHIN NG: DH configured to switch LEDs"
0018_CIN E004_E 0 99 0018E004000000000000 "CASHIN NG: DH configured to switch LEDs"
0018_CIN E005_W 2 99 0018E005000000000000 "CASHIN NG: Handling error at the filling tray"
0018_CIN E005_E 2 99 0018E005000000000000 "CASHIN NG: Handling error at the filling tray"
0018_CIN EF00_E 4 99 0018EF00000000000000 "CASHIN NG: V24 data not in the expected format"
0018_CIN EF01_E 1 99 0018EF01000000000000 "CASHIN NG: Invalid CRC received with encrypted line"
0018_CIN EF02_E 1 99 0018EF02000000000000 "CASHIN NG: Wrong value for FRM_AUTO_LOAD in CSCCNG
section"
0018_CIN EF03_E 1 99 0018EF03000000000000 "CASHIN NG: Wrong value for LED in CSCINI/Registry with
CSCCNG"
0018_CIN EF04_E 1 99 0018EF04000000000000 "CASHIN NG: Firmware loading could not be completed"
0018_CIN EF05_E 1 99 0018EF05000000000000 "CASHIN NG: Invalid currency files, check registry configu-
ration"
0018_CIN EF06_E 1 99 0018EF06000000000000 "CASHIN NG: Invalid currency Firmware loading could not be
completed"
0018_CIN EF07_E 1 99 0018EF07000000000000 "CASHIN NG: Wrong value for RECOVERY in Registry"
0018_CIN EF08_E 1 99 0018EF08000000000000 "CASHIN NG: Wrong value for VARIANT in Registry"
0018_CIN EF09_E 1 99 0018EF09000000000000 "CASHIN NG: Wrong value for BEB_STATISTICS in Registry"
0018_CIN EF0A_E 1 99 0018EF0A000000000000 "CASHIN NG: Not enough currency files installed"
0018_CIN EF0B_E 1 99 0018EF0B000000000000 "CASHIN NG: Wrong value for CHECK_MODULES in Registry"
0018_CIN EF0C_E 1 99 0018EF0C000000000000 "CASHIN NG: Wrong value for DISPENSEIN_TRACE in
Registry"
0018_CIN EF0D_E 1 99 0018EF0D000000000000 "CASHIN NG: Wrong value for CY_AUTOLOAD in Registry"
0018_CIN EF0E_E 1 99 0018EF0E000000000000 "CASHIN NG: Wrong value for CY_MAP_NOTES in Registry"
0018_CIN EF0F_E 1 99 0018EF0F000000000000 "CASHIN NG: Wrong value for CONFIG_BACKUP in Registry"
0018_CIN EF10_E 1 99 0018EF10000000000000 "CASHIN NG: Wrong value for LOADER_CTL in Registry"
0018_CIN EF11_E 1 99 0018EF11000000000000 "CASHIN NG: BIM module of wrong type recognized"
0018_CIN EF12_E 1 99 0018EF12000000000000 "CASHIN NG: Currency file could not be opened"
0018_CIN EF13_E 1 99 0018EF13000000000000 "CASHIN NG: Currency file could not be read"
0018_CIN EF14_E 1 99 0018EF14000000000000 "CASHIN NG: Firmware file could not be opened"

U25604-J-Z745-1-7600 May 2011 25

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
0018_CIN EF15_E 1 99 0018EF15000000000000 "CASHIN NG: Firmware file could not be read"
0018_CIN EF16_E 1 99 0018EF16000000000000 "CASHIN NG: Invalid firmware file format"
0018_CIN EF17_E 1 99 0018EF17000000000000 "CASHIN NG: BIM manipulation"
0018_CIN EF18_E 1 99 0018EF18000000000000 "CASHIN NG: SCOPE active but jumper of CMD-V4 in wrong
position"
0018_CIN EF1A_E 1 99 0018EF1A000000000000 "CASHIN NG: Wrong value for FILE_CTR in Registry"
0018_CIN F000_E 1 99 0018F000000000000000 "CASHIN NG: Firmware not loaded in CDM-NG"
0018_CIN F001_E 4 99 0018F001000000000000 "CASHIN NG: Wrong syntax"
0018_CIN F002_E 2 99 0018F002000000000000 "CASHIN NG: One of the locks is active"
0018_CIN F003_E 2 99 0018F003000000000000 "CASHIN NG: Error occured during execution of command"
0018_CIN F004_E 2 99 0018F004000000000000 "CASHIN NG: Safe door must be open for this command"
0018_CIN F005_E 4 99 0018F005000000000000 "CASHIN NG: The command cannot be executed at this point of
time"
0018_CIN F006_E 2 99 0018F006000000000000 "CASHIN NG: The CDM-NG recognized a problem with the
encryption"
0018_CIN F007_E 2 99 0018F007000000000000 "CASHIN NG: If no error found"
0018_CIN F012_E 4 99 0018F012000000000000 "CASHIN NG: Same error as
CNG_FRM_DEVICE_NOT_READY"
0018_CIN F013_E 2 99 0018F013000000000000 "CASHIN NG: The same error as CNG_FRM_ERROR with an
exception"
0018_CIN F015_E 2 99 0018F015000000000000 "CASHIN NG: The same error as CNG_FRM_CONTEXT with
an exception"
0018_CIN FE06_E 4 99 0018FE06000000000000 "CASHIN NG: COMM reports invalid spec. for the protocol"
0018_CIN FE07_E 4 99 0018FE07000000000000 "CASHIN NG: A COMM WRITE command is cancelled by the
user"
0018_CIN FE08_E 4 99 0018FE08000000000000 "CASHIN NG: COMM WRITE command could not be executed"
0018_CIN FE09_E 4 99 0018FE09000000000000 "CASHIN NG: A COMM READ command could not be
executed"
0018_CIN FE0A_E 4 99 0018FE0A000000000000 "CASHIN NG: A COMM READ command is cancelled by the
user"
0018_CIN FE0B_E 4 99 0018FE0B000000000000 "CASHIN NG: The COMM driver reports a parity error"
0018_CIN FE0C_E 4 99 0018FE0C000000000000 "CASHIN NG: The COMM driver reports a general error"
0018_CIN FE0F_E 4 99 0018FE0F000000000000 "CASHIN NG: Peripheral device did not answer"
0018_CIN FE13_E 4 99 0018FE13000000000000 "CASHIN NG: The channel was not initialized"
0018_CIN FE16_E 4 99 0018FE16000000000000 "CASHIN NG: The COMM driver reports a break"
0018_CIN FE7A_E 4 99 0018FE7A000000000000 "CASHIN NG: The COMM driver reports a overrun error"
0018_CIN FE7B_E 4 99 0018FE7B000000000000 "CASHIN NG: The COMM driver reports a frameing error"
0018_CIN FE85_E 4 99 0018FE85000000000000 "CASHIN NG: The COMM driver could not be opened"
0018_CIN FE89_E 4 99 0018FE89000000000000 "CASHIN NG: The pointer pTxData is illegal"
0018_CIN FE8B_E 4 99 0018FE8B000000000000 "CASHIN NG: Called function is invalid for CscCommOpen"
0018_CIN FE8C_E 4 99 0018FE8C000000000000 "CASHIN NG: The peripheral device does not return an STX"
0018_CIN FE8D_E 4 99 0018FE8D000000000000 "CASHIN NG: The peripheral device does not return an ETX"
0018_CIN FE8E_E 4 99 0018FE8E000000000000 "CASHIN NG: Block length does not agree with the transmitted
block length"
0018_CIN FE8F_E 4 99 0018FE8F000000000000 "CASHIN NG: The block ID is invalid"
0018_CIN FE90_E 4 99 0018FE90000000000000 "CASHIN NG: Received DID does not agree with the transmitted
DID"
0018_CIN FE91_E 4 99 0018FE91000000000000 "CASHIN NG: Wrong command specification"
0018_CIN FE92_E 4 99 0018FE92000000000000 "CASHIN NG: The received acknowledge type is invalid"
0018_CIN FE93_E 4 99 0018FE93000000000000 "CASHIN NG: Max no of repeat transmissions reached"
0018_CIN FE94_E 4 99 0018FE94000000000000 "CASHIN NG: Max no of receive repeats has been reached"
0018_CIN FE95_E 4 99 0018FE95000000000000 "CASHIN NG: Monitoring time during transmission has been
exceeded"
0018_CIN FE96_E 4 99 0018FE96000000000000 "CASHIN NG: Monitoring time during receive has been
exceeded"
0018_CIN FE97_E 4 99 0018FE97000000000000 "CASHIN NG: Busy time from phys. device excceeded"
0018_CIN FE98_E 4 99 0018FE98000000000000 "CASHIN NG: The protocol was cancelled"
0018_CIN FE9C_E 4 99 0018FE9C000000000000 "CASHIN NG: The length in TxData is 0"
0018_CIN FE9D_E 4 99 0018FE9D000000000000 "CASHIN NG: CSCWISODLL could not be found in the PATH"
0018_CIN FE9E_E 4 99 0018FE9E000000000000 "CASHIN NG: The CSCWISODLL could not be opened"
0018_CIN FEE0_E 4 99 0018FEE0000000000000 "CASHIN NG: The peripheral device did not answer"
0018_CIN FEE1_E 4 99 0018FEE1000000000000 "CASHIN NG: Peripheral device did not answer as expected"
0018_CIN FEE2_E 4 99 0018FEE2000000000000 "CASHIN NG: The peripheral device is busy"
0018_CIN FEE3_E 4 99 0018FEE3000000000000 "CASHIN NG: Peripheral device did not answer as expected"

26 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
0018_CIN FEE4_E 4 99 0018FEE4000000000000 "CASHIN NG: Max no. of repeat transmissions reached"
0018_CIN FEE5_E 4 99 0018FEE5000000000000 "CASHIN NG: Device asked for termination"
0018_CIN FEE6_E 4 99 0018FEE6000000000000 "CASHIN NG: Peripheral device did not answer"
0018_CIN FEE7_E 4 99 0018FEE7000000000000 "CASHIN NG: Response of device not completely received"
0018_CIN FEE8_E 4 99 0018FEE8000000000000 "CASHIN NG: The header of the response is invalid"
0018_CIN FEE9_E 4 99 0018FEE9000000000000 "CASHIN NG: DID does not agree with the transmitted DID"
0018_CIN FEEA_E 4 99 0018FEEA000000000000 "CASHIN NG: DID does not agree with the transmitted device
ID"
0018_CIN FEEB_E 4 99 0018FEEB000000000000 "CASHIN NG: Command spec. does not agree with the trans-
mitted command spec."
0018_CIN FEEC_E 4 99 0018FEEC000000000000 "CASHIN NG: The response of the device has not been
completely received"
0018_CIN FEED_E 4 99 0018FEED000000000000 "CASHIN NG: A cancel command has been called"
0018_CIN FEEF_E 4 99 0018FEEF000000000000 "CASHIN NG: A cancel command has been called"
0018_CIN FEF0_E 4 99 0018FEF0000000000000 "CASHIN NG: The command could not be executed"
0018_CIN FEF1_E 4 99 0018FEF1000000000000 "CASHIN NG: The command was aborted by the user"
0018_CIN FEF2_E 4 99 0018FEF2000000000000 "CASHIN NG: The command could not be executed"
0018_CIN FEF3_E 4 99 0018FEF3000000000000 "CASHIN NG: A cancel command could not be executed"
0018_CIN FEF4_E 4 99 0018FEF4000000000000 "CASHIN NG: Internal monitoring time exceeded"
0018_CIN FEF5_E 4 99 0018FEF5000000000000 "CASHIN NG: Internal error within the CSCWISODLL"
AA18_CIN DEFA_W 4 99 AA18DEFA000000000000 "USB/CIN: DEFAULT_WARNING"
AA18_CIN DEFA_E 4 99 AA18DEFA000000000000 "USB/CIN: DEFAULT_ERROR"
AA18_CIN 8000_E 4 99 AA188000000000000000 "USB/CIN: Unexpected descriptor was reported from USB
device"
AA18_CIN 8001_E 4 99 AA188001000000000000 "USB/CIN: Device not found"
AA18_CIN 8002_E 4 99 AA188002000000000000 "USB/CIN: Not enough memory available"
AA18_CIN 8003_E 4 99 AA188003000000000000 "USB/CIN: It was no endpoint found in the descriptor"
AA18_CIN 8004_E 4 99 AA188004000000000000 "USB/CIN: The creation of the list of USB devices failed"
AA18_CIN FE09_E 4 99 AA18FE09000000000000 "USB/CIN: USB read command could not be executed in the
specified monitoring time"
AA18_CIN FE0A_E 4 99 AA18FE0A000000000000 "USB/CIN: USB READ command is cancelled by the user"
AA18_CIN FE89_E 4 99 AA18FE89000000000000 "USB/CIN: The pointer pData is illegal"
AA18_CIN FE9C_E 4 99 AA18FE9C000000000000 "USB/CIN: The length in DataSize is 0 (zero)"
AA18_CIN 0001_E 4 99 AA180001000000000000 "USB/CIN: CRC error has been detected"
AA18_CIN 0002_E 4 99 AA180002000000000000 "USB/CIN: Bit stuffing error has been detected"
AA18_CIN 0003_E 4 99 AA180003000000000000 "USB/CIN: DATA toggle mismatch has been detected"
AA18_CIN 0004_E 4 99 AA180004000000000000 "USB/CIN: STALLPID has been detected, error is reported by
the USB host controller"
AA18_CIN 0005_E 4 99 AA180005000000000000 "USB/CIN: USB device is not responding, error is reported by
the USB host"
AA18_CIN 0006_E 4 99 AA180006000000000000 "USB/CIN: PID check has failed, error is reported by the USB
host controller"
AA18_CIN 0007_E 4 99 AA180007000000000000 "USB/CIN: Unexpected PID detected, error is reported by the
USB host"
AA18_CIN 0008_E 4 99 AA180008000000000000 "USB/CIN: Data overrun error detected, error is reported by the
USB host"
AA18_CIN 0009_E 4 99 AA180009000000000000 "USB/CIN: Data underrun error detected, error is reported by the
USB host"
AA18_CIN 000A_E 4 99 AA18000A000000000000 "USB/CIN: Error code is reserved by the USB host controller
driver"
AA18_CIN 000B_E 4 99 AA18000B000000000000 "USB/CIN: Error code is reserved by the USB host controller
driver"
AA18_CIN 000C_E 4 99 AA18000C000000000000 "USB/CIN: Buffer overrun has been detected, error is reported
by the USB host"
AA18_CIN 000D_E 4 99 AA18000D000000000000 "USB/CIN: Buffer underrun has been detected, error is reported
by the USB host"
AA18_CIN 000F_E 4 99 AA18000F000000000000 "USB/CIN: Buffer was not accessed, error is reported by the
USB host"
AA18_CIN 0010_E 4 99 AA180010000000000000 "USB/CIN: FIFO error has been detected, PCI bus latency was
too long"
AA18_CIN 0011_E 4 99 AA180011000000000000 "USB/CIN: XACT error has been detected, error is reported by
the USB host"
AA18_CIN 0012_E 4 99 AA180012000000000000 "USB/CIN: Device is babbling, data transfer phase exceeds the
USB frame length"
AA18_CIN 0013_E 4 99 AA180013000000000000 "USB/CIN: Data buffer error has been detected, error is reported
by the USB host"

U25604-J-Z745-1-7600 May 2011 27

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
AA18_CIN 0030_E 4 99 AA180030000000000000 "USB/CIN: Endpoint has been halted by the USB bus driver
USBD"
AA18_CIN 0100_E 4 99 AA180100000000000000 "USB/CIN: Memory allocation attempt has failed, error is
reported by the USB bus"
AA18_CIN 0200_E 4 99 AA180200000000000000 "USB/CIN: Invalid URB function code has been passed, error is
reported by the USB"
AA18_CIN 0300_E 4 99 AA180300000000000000 "USB/CIN: Invalid parameter has been passed, error is reported
by the USB bus"
AA18_CIN 0400_E 4 99 AA180400000000000000 "USB/CIN: There are data transfer requests pending for the
device"
AA18_CIN 0500_E 4 99 AA180500000000000000 "USB/CIN: Request has failed, error is reported by the USB bus
driver USBD"
AA18_CIN 0600_E 4 99 AA180600000000000000 "USB/CIN: Invalid pipe handle has been passed, error is
reported by the USB bus"
AA18_CIN 0700_E 4 99 AA180700000000000000 "USB/CIN: There is not enough bandwidth available, error is
reported by the USB bus"
AA18_CIN 0800_E 4 99 AA180800000000000000 "USB/CIN: Internal host controller error has been detected"
AA18_CIN 0900_E 4 99 AA180900000000000000 "USB/CIN: Short transfer has been detected, error is reported by
the USB bus"
AA18_CIN 0A00_E 4 99 AA180A00000000000000 "USB/CIN: Bad start frame has been specified, error is reported
by the USB bus"
AA18_CIN 0B00_E 4 99 AA180B00000000000000 "USB/CIN: Asynchronous request has failed, error is reported by
the USB bus driver"
AA18_CIN 0C00_E 4 99 AA180C00000000000000 "USB/CIN: USB frame control is currently owned, error is
reported by the USB bus"
AA18_CIN 0D00_E 4 99 AA180D00000000000000 "USB/CIN: USB frame control is currently not owned, error is
reported by the USB"
AA18_CIN 0E00_E 4 99 AA180E00000000000000 "USB/CIN: Operation is not supported, error is reported by the
USB bus driver"
AA18_CIN 0F00_E 4 99 AA180F00000000000000 "USB/CIN: Invalid configuration descriptor was reported by the
device"
AA18_CIN 1000_E 4 99 AA181000000000000000 "USB/CIN: Operation has failed, error is reported by the USBIO
driver"
AA18_CIN 1001_E 4 99 AA181001000000000000 "USB/CIN: Invalid input buffer has been passed to an IOCTL
operation"
AA18_CIN 1002_E 4 99 AA181002000000000000 "USB/CIN: Invalid output buffer has been passed to an IOCTL
operation"
AA18_CIN 1003_E 4 99 AA181003000000000000 "USB/CIN: There is not enough system memory available to
complete the operation"
AA18_CIN 1004_E 4 99 AA181004000000000000 "USB/CIN: There are read or write requests pending, error is
reported by the USBIO"
AA18_CIN 1005_E 4 99 AA181005000000000000 "USB/CIN: USB device is already configured, error is reported
by the USBIO"
AA18_CIN 1006_E 4 99 AA181006000000000000 "USB/CIN: The USB device is not configured, error is reported
by the USBIO driver"
AA18_CIN 1007_E 4 99 AA181007000000000000 "USB/CIN: There are open pipes, error is reported by the USBIO
driver"
AA18_CIN 1008_E 4 99 AA181008000000000000 "USB/CIN: Either the handle is already bound to a pipe"
AA18_CIN 1009_E 4 99 AA181009000000000000 "USB/CIN: Handle is not bound to a pipe, error is reported by the
USBIO driver"
AA18_CIN 100A_E 4 99 AA18100A000000000000 "USB/CIN: USB device has been removed from the system"
AA18_CIN 100B_E 4 99 AA18100B000000000000 "USB/CIN: Specified control code is not supported"
AA18_CIN 100C_E 4 99 AA18100C000000000000 "USB/CIN: Operation has been timed out, error is reported by
the USBIO driver"
AA18_CIN 100D_E 4 99 AA18100D000000000000 "USB/CIN: Invalid recipient has been specified"
AA18_CIN 100E_E 4 99 AA18100E000000000000 "USB/CIN: Either an invalid request type has been specified"
AA18_CIN 100F_E 4 99 AA18100F000000000000 "USB/CIN: Invalid IOCTL code has been specified, error is
reported by the USBIO"
AA18_CIN 1010_E 4 99 AA181010000000000000 "USB/CIN: Direction of the data transfer request is not supported
by that pipe"
AA18_CIN 1011_E 4 99 AA181011000000000000 "USB/CIN: Number of asynchronous data packets specified in
an asynchronous read"
AA18_CIN 1012_E 4 99 AA181012000000000000 "USB/CIN: Memory resources are exhausted. This error is
reported by the USBIO driver"
AA18_CIN 1013_E 4 99 AA181013000000000000 "USB/CIN: The specified pipe was not found in the current
configuration"
AA18_CIN 1014_E 4 99 AA181014000000000000 "USB/CIN: An invalid asynchronous data packet has been
specified"

28 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
AA18_CIN 1015_E 4 99 AA181015000000000000 "USB/CIN: There are not enough system resources to complete
the operation"
AA18_CIN 1016_E 4 99 AA181016000000000000 "USB/CIN: Specified interface was not found in the current
configuration"
AA18_CIN 1017_E 4 99 AA181017000000000000 "USB/CIN: Operation cannot be executed while the USB device
is in the current state"
AA18_CIN 1018_E 4 99 AA181018000000000000 "USB/CIN: Invalid parameter has been specified with an IOCTL
operation"
AA18_CIN 1019_E 4 99 AA181019000000000000 "USB/CIN: Evaluation interval of the USBIO DEMO version has
expired"
AA18_CIN 101A_E 4 99 AA18101A000000000000 "USB/CIN: Invalid power state has been specified"
AA18_CIN 101B_E 4 99 AA18101B000000000000 "USB/CIN: Device has entered a power down state"
AA18_CIN 101C_E 4 99 AA18101C000000000000 "USB/CIN: API version reported by the USBIO driver does not
match"
AA18_CIN 101D_E 4 99 AA18101D000000000000 "USB/CIN: Set configuration operation has failed, error is
reported by the USBIO"
AA18_CIN 1080_E 4 99 AA181080000000000000 "USB/CIN: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA18_CIN 1081_E 4 99 AA181081000000000000 "USB/CIN: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA18_CIN 1082_E 4 99 AA181082000000000000 "USB/CIN: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA18_CIN 1083_E 4 99 AA181083000000000000 "USB/CIN: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA18_CIN 1084_E 4 99 AA181084000000000000 "USB/CIN: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA18_CIN 1085_E 4 99 AA181085000000000000 "USB/CIN: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA18_CIN 1086_E 4 99 AA181086000000000000 "USB/CIN: The operation has failed due to a restriction of the
USBIO LIGHT version"
AA18_CIN 1087_E 4 99 AA181087000000000000 "USB/CIN: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA18_CIN 1100_E 4 99 AA181100000000000000 "USB/CIN: The specified device object does not exist"
AA18_CIN 1102_E 4 99 AA181102000000000000 "USB/CIN: Device object was opened, there is no valid handle
to execute the operation"
AA18_CIN 1104_E 4 99 AA181104000000000000 "USB/CIN: Enumeration of the specified devices has failed"
AA18_CIN 1105_E 4 99 AA181105000000000000 "USB/CIN: Invalid parameter has been passed to a function"
AA18_CIN 1106_E 4 99 AA181106000000000000 "USB/CIN: Library setupapi.dll could not be loaded"
AA18_CIN 2000_E 4 99 AA182000000000000000 "USB/CIN: Set configuration request has failed"
AA18_CIN 3000_E 4 99 AA183000000000000000 "USB/CIN: Buffer is too small, error is reported by the USB bus
driver USBD"
AA18_CIN 4000_E 4 99 AA184000000000000000 "USB/CIN: Interface was not found, error is reported by the USB
bus driver USBD"
AA18_CIN 5000_E 4 99 AA185000000000000000 "USB/CIN: Invalid pipe flags have been specified"
AA18_CIN 6000_E 4 99 AA186000000000000000 "USB/CIN: Operation has been timed out, error is reported by
the USB bus driver"
AA18_CIN 7000_E 4 99 AA187000000000000000 "USB/CIN: USB device is gone, error is reported by the USB bus
driver USBD"
001D_CIN DEFA_W 2 99 001DDEFA000000000000 "CASHIN CRS: DEFAULT_WARNING"
001D_CIN DEFA_E 4 99 001DDEFA000000000000 "CASHIN CRS: DEFAULT_ERROR"
001D_CIN 3000_E 4 99 001D3000000000000000 "CASHIN CRS: Context error"
001D_CIN 3010_E 4 99 001D3010000000000000 "CASHIN CRS: No response from CRS"
001D_CIN 3016_E 4 99 001D3016000000000000 "CASHIN CRS: CRS electronics faulty"
001D_CIN 3020_E 2 99 001D3020000000000000 "CASHIN CRS: CRS communication problem"
001D_CIN 3025_E 2 99 001D3025000000000000 "CASHIN CRS: CRS communication problem"
001D_CIN 3100_E 4 99 001D3100000000000000 "CASHIN CRS: CRS controller error"
001D_CIN 3101_E 4 99 001D3101000000000000 "CASHIN CRS: CRS controller error"
001D_CIN 3105_E 4 99 001D3105000000000000 "CASHIN CRS: CRS controller error"
001D_CIN 3106_E 4 99 001D3106000000000000 "CASHIN CRS: CRS controller error"
001D_CIN 3110_E 4 99 001D3110000000000000 "CASHIN CRS: Software missing in CRS"
001D_CIN 3120_E 4 99 001D3120000000000000 "CASHIN CRS: CRS has not been inserted completely"
001D_CIN 3125_E 2 99 001D3125000000000000 "CASHIN CRS: Front or rear door not closed"
001D_CIN 3135_E 4 99 001D3135000000000000 "CASHIN CRS: Max number of retracts reached"
001D_CIN 3136_E 4 99 001D31360000000000 "CASHIN CRS: Device lock after jam"
001D_CIN 3137_E 2 99 001D313700000000000000 "CASHIN CRS: CashIn box for level 3 notes overfilled"
001D_CIN 3140_E 0 99 001D3140000000000000 "CASHIN CRS: Minimum configuration cash-out not reached."

U25604-J-Z745-1-7600 May 2011 29

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
001D_CIN 3145_E 4 99 001D314500000000000000 "CASHIN CRS: Minimum configuration cash-in not reached."
001D_CIN 3146_E 4 99 001D314600000000000000 "CASHIN CRS: Minimum configuration BIM not reached."
001D_CIN 3170_E 2 99 001D317000000000000000 "CASHIN CRS: Money jam during cash-in"
001D_CIN 3171_E 2 99 001D317100000000000000 "CASHIN CRS: Money jam during cash-in"
001D_CIN 3175_E 2 99 001D317500000000000000 "CASHIN CRS: Money jam during cash-in"
001D_CIN 3176_E 2 99 001D317600000000000000 "CASHIN CRS: Money jam during cash-in"
001D_CIN 3178_E 2 99 001D317800000000000000 "CASHIN CRS: Money jam during cash-in"
001D_CIN 3179_E 2 99 001D317900000000000000 "CASHIN CRS: Money jam during cash-in"
001D_CIN 3180_E 2 99 001D3180000000000000 "CASHIN CRS: Money jam during cash-out"
001D_CIN 3181_E 2 99 001D3181000000000000 "CASHIN CRS: Money jam during cash-out"
001D_CIN 3182_E 2 99 001D3182000000000000 "CASHIN CRS: Money jam during reject/retract"
001D_CIN 3185_E 2 99 001D3185000000000000 "CASHIN CRS: Note jam during cash-out"
001D_CIN 3186_E 2 99 001D3186000000000000 "CASHIN CRS: Money jam during bundle reject"
001D_CIN 3187_E 2 99 001D3187000000000000 "CASHIN CRS: Money jam during retract"
001D_CIN 3200_E 2 99 001D320000000000000000 "CASHIN CRS: Switch cash-in cassette 1 faulty"
001D_CIN 3201_E 2 99 001D320100000000000000 "CASHIN CRS: Switch cash-in cassette 2 faulty"
001D_CIN 3202_E 2 99 001D320200000000000000 "CASHIN CRS: Switch cash-in cassette 3 faulty"
001D_CIN 3203_E 2 99 001D320300000000000000 "CASHIN CRS: Switch cash-in cassette 4 faulty"
001D_CIN 3204_E 2 99 001D320400000000000000 "CASHIN CRS: Switch cash-in cassette 5 faulty"
001D_CIN 3205_E 4 99 001D3205000000000000 "CASHIN CRS: Switch safe delivery/escrow/cash-out tray faulty/
blocked"
001D_CIN 3206_E 4 99 001D3206000000000000 "CASHIN CRS: Single reject switch faulty/blocked"
001D_CIN 3207_E 2 99 001D320700000000000000 "CASHIN CRS: Switch escrow (MA6) faulty/blocked"
001D_CIN 3210_E 4 99 001D3210000000000000 "CASHIN CRS: Measuring station faulty"
001D_CIN 3214_E 4 99 001D3214000000000000 "CASHIN CRS: Tape sensor in BIM module reports error"
001D_CIN 3215_E 4 99 001D3215000000000000 "CASHIN CRS: Measuring station faulty"
001D_CIN 3216_E 3 99 001D321600000000000000 "CASHIN CRS: BIM soiled or faulty"
001D_CIN 3217_E 3 99 001D321700000000000000 "CASHIN CRS: BIM communication reader faulty"
001D_CIN 3218_E 3 99 001D321800000000000000 "CASHIN CRS: BIM note impulses missing or out of tolerance"
001D_CIN 3219_E 3 99 001D321900000000000000 "CASHIN CRS: BIM reports an acknowledgement error"
001D_CIN 3220_E 4 99 001D3220000000000000 "CASHIN CRS: Photosensor amplifier faulty"
001D_CIN 3230_E 4 99 001D3230000000000000 "CASHIN CRS: Retract switch (MA4) faulty/blocked"
001D_CIN 3231_E 4 99 001D3231000000000000 "CASHIN CRS: Selection switch faulty/blocked"
001D_CIN 3232_E 4 99 001D3232000000000000 "CASHIN CRS: Single reject switch faulty/blocked"
001D_CIN 3250_E 4 99 001D3250000000000000 "CASHIN CRS: Transport motor M1 faulty/blocked"
001D_CIN 3255_E 4 99 001D3255000000000000 "CASHIN CRS: Transport motor M2 faulty/blocked"
001D_CIN 3256_E 4 99 001D3256000000000000 "CASHIN CRS: Transport motor M3 faulty/blocked"
001D_CIN 3285_E 2 99 001D328500000000000 "CASHIN CRS: Shutter error"
001D_CIN 3286_E 2 99 001D328600000000000000 "CASHIN CRS: Shutter error cash-in tray"
001D_CIN 3287_E 2 99 001D328700000000000 "CASHIN CRS: Beater in cash-out tray blocked"
001D_CIN 3295_E 2 99 001D3295000000000000 "CASHIN CRS: Photosensor cash-out tray covered"
001D_CIN 3296_E 2 99 001D3296000000000000 "CASHIN CRS: Photosensor filling tray covered"
001D_CIN 3310_E 2 99 001D3310000000000000 "CASHIN CRS: Too many bundle rejects (cassette 1)"
001D_CIN 3320_E 2 99 001D3320000000000000 "CASHIN CRS: Too many bundle rejects (cassette 2)"
001D_CIN 3330_E 2 99 001D3330000000000000 "CASHIN CRS: Too many bundle rejects (cassette 3)"
001D_CIN 3340_E 2 99 001D3340000000000000 "CASHIN CRS: Too many bundle rejects (cassette 4)"
001D_CIN 3405_E 2 99 001D3405000000000000 "CASHIN CRS: Extraction from filling tray impossible"
001D_CIN 3406_E 4 99 001D3406000000000000 "CASHIN CRS: Extraction from cash-out tray impossible"
001D_CIN 3407_E 2 99 001D340700000000000000 "CASHIN CRS: Metal detection in input tray"
001D_CIN 3408_E 2 99 001D340800000000000000 "CASHIN CRS: Input shutter not closed"
001D_CIN 3410_E 2 99 001D3410000000000000 "CASHIN CRS: Note extraction impossible (cassette 1)"
001D_CIN 3411_E 2 99 001D3411000000000000 "CASHIN CRS: Note extraction impossible (roller 1)"
001D_CIN 3420_E 2 99 001D3420000000000000 "CASHIN CRS: Note extraction impossible (cassette 2)"
001D_CIN 3421_E 2 99 001D3421000000000000 "CASHIN CRS: Note extraction impossible (roller 2)"
001D_CIN 3430_E 2 99 001D3430000000000000 "CASHIN CRS: Note extraction impossible (cassette 3)"
001D_CIN 3431_E 2 99 001D3431000000000000 "CASHIN CRS: Note extraction impossible (roller 3)"
001D_CIN 3440_E 2 99 001D3440000000000000 "CASHIN CRS: Note extraction impossible (cassette 4)"
001D_CIN 3441_E 2 99 001D3441000000000000 "CASHIN CRS: Note extraction impossible (roller 4)"
001D_CIN 3451_E 2 99 001D3451000000000000 "CASHIN CRS: Note extraction impossible (roller 5)"
001D_CIN 3461_E 2 99 001D3461000000000000 "CASHIN CRS: Note extraction impossible (roller 6)"
001D_CIN 3510_E 2 99 001D3510000000000000 "CASHIN CRS: Too many bad notes (cassette 1)"
001D_CIN 3520_E 2 99 001D3520000000000000 "CASHIN CRS: Too many bad notes (cassette 2)"

30 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
001D_CIN 3530_E 2 99 001D3530000000000000 "CASHIN CRS: Too many bad notes (cassette 3)"
001D_CIN 3540_E 2 99 001D3540000000000000 "CASHIN CRS: Too many bad notes (cassette 4)"
001D_CIN 3605_E 2 99 001D360500000000000000 "CASHIN CRS: ESCROW faulty"
001D_CIN 3606_E 2 99 001D360600000000000000 "CASHIN CRS: ESCROW, beginning of tape not found or not
leave "
001D_CIN 3607_E 2 99 001D360700000000000000 "CASHIN CRS: Internal ESCROW error"
001D_CIN 3608_E 2 99 001D360800000000000000 "CASHIN CRS: Wrong values from ESCROW impulse channel"
001D_CIN 3610_E 2 99 001D3610000000000000 "CASHIN CRS: Cassette 1 faulty"
001D_CIN 3611_E 2 99 001D3611000000000000 "CASHIN CRS: Roller 1 faulty"
001D_CIN 3620_E 2 99 001D3620000000000000 "CASHIN CRS: Cassette 2 faulty"
001D_CIN 3621_E 2 99 001D3621000000000000 "CASHIN CRS: Roller 2 faulty"
001D_CIN 3630_E 2 99 001D3630000000000000 "CASHIN CRS: Cassette 3 faulty"
001D_CIN 3631_E 2 99 001D3631000000000000 "CASHIN CRS: Roller 3 faulty"
001D_CIN 3640_E 2 99 001D3640000000000000 "CASHIN CRS: Cassette 4 faulty"
001D_CIN 3641_E 2 99 001D3641000000000000 "CASHIN CRS: Roller 4 faulty"
001D_CIN 3651_E 2 99 001D3651000000000000 "CASHIN CRS: Roller 5 faulty"
001D_CIN 3661_E 2 99 001D3661000000000000 "CASHIN CRS: Roller 6 faulty"
001D_CIN 3700_E 2 99 001D3700000000000000 "CASHIN CRS: Photosensor thickness measuring station (safe
module) soiled"
001D_CIN 3705_E 2 99 001D3705000000000000 "CASHIN CRS: Photosensor thickness measuring station
(counter area) soiled"
001D_CIN 3710_E 2 99 001D3710000000000000 "CASHIN CRS: Dispenser sensor soiled (cassette 1)"
001D_CIN 3720_E 2 99 001D3720000000000000 "CASHIN CRS: Dispenser sensor soiled (cassette 2)"
001D_CIN 3730_E 2 99 001D3730000000000000 "CASHIN CRS: Dispenser sensor soiled (cassette 3)"
001D_CIN 3740_E 2 99 001D3740000000000000 "CASHIN CRS: Dispenser sensor soiled (cassette 4)"
001D_CIN 3810_E 2 99 001D3810000000000000 "CASHIN CRS: Empty sensor soiled (cassette 1)"
001D_CIN 3820_E 2 99 001D3820000000000000 "CASHIN CRS: Empty sensor soiled (cassette 2)"
001D_CIN 3830_E 2 99 001D3830000000000000 "CASHIN CRS: Empty sensor soiled (cassette 3)"
001D_CIN 3840_E 2 99 001D3840000000000000 "CASHIN CRS: Empty sensor soiled (cassette 4)"
001D_CIN 3901_E 2 99 001D3901000000000000 "CASHIN CRS: Photosensor L1 soiled"
001D_CIN 3902_E 2 99 001D3902000000000000 "CASHIN CRS: Photosensor L2 soiled"
001D_CIN 3903_E 2 99 001D3903000000000000 "CASHIN CRS: Photosensor L3 soiled"
001D_CIN 3904_E 2 99 001D3904000000000000 "CASHIN CRS: Photosensor L4 soiled"
001D_CIN 3905_E 2 99 001D3905000000000000 "CASHIN CRS: Photosensor L5 soiled"
001D_CIN 3906_E 2 99 001D3906000000000000 "CASHIN CRS: Photosensor L6 soiled"
001D_CIN 3907_E 2 99 001D3907000000000000 "CASHIN CRS: Photosensor L27 soiled"
001D_CIN 3908_E 2 99 001D3908000000000000 "CASHIN CRS: Photosensor L8 soiled"
001D_CIN 3909_E 2 99 001D3909000000000000 "CASHIN CRS: Photosensor L9 soiled"
001D_CIN 3910_E 2 99 001D3910000000000000 "CASHIN CRS: Photosensor L10 soiled"
001D_CIN 3911_E 2 99 001D3911000000000000 "CASHIN CRS: Photosensor L11 soiled"
001D_CIN 3912_E 2 99 001D3912000000000000 "CASHIN CRS: Photosensor L12 soiled"
001D_CIN 3913_E 2 99 001D3913000000000000 "CASHIN CRS: Photosensor L13 soiled"
001D_CIN 3914_E 2 99 001D3914000000000000 "CASHIN CRS: Photosensor L14 soiled"
001D_CIN 3915_E 2 99 001D3915000000000000 "CASHIN CRS: Photosensor L15 soiled"
001D_CIN 3916_E 2 99 001D3916000000000000 "CASHIN CRS: Photosensor L16 soiled"
001D_CIN 3917_E 2 99 001D3917000000000000 "CASHIN CRS: Photosensor L17 soiled"
001D_CIN 3918_E 2 99 001D3918000000000000 "CASHIN CRS: Photosensor L18 soiled"
001D_CIN 3919_E 2 99 001D3919000000000000 "CASHIN CRS: Photosensor L19 soiled"
001D_CIN 3920_E 2 99 001D3920000000000000 "CASHIN CRS: Photosensor L20 soiled"
001D_CIN 3921_E 2 99 001D3921000000000000 "CASHIN CRS: Photosensor L21 soiled"
001D_CIN 3922_E 2 99 001D3922000000000000 "CASHIN CRS: Photosensor L22 soiled"
001D_CIN 3923_E 2 99 001D3923000000000000 "CASHIN CRS: Photosensor L23 soiled"
001D_CIN 3924_E 2 99 001D3924000000000000 "CASHIN CRS: Photosensor L24 soiled"
001D_CIN 3925_E 2 99 001D3925000000000000 "CASHIN CRS: Photosensor L25 soiled"
001D_CIN 3926_E 2 99 001D3926000000000000 "CASHIN CRS: Photosensor L26 soiled"
001D_CIN 3931_E 2 99 001D3931000000000000 "CASHIN CRS: Photosensor roller 1 soiled"
001D_CIN 3932_E 2 99 001D3932000000000000 "CASHIN CRS: Photosensor roller 2 soiled"
001D_CIN 3933_E 2 99 001D3933000000000000 "CASHIN CRS: Photosensor roller 3 soiled"
001D_CIN 3934_E 2 99 001D3934000000000000 "CASHIN CRS: Photosensor roller 4 soiled"
001D_CIN 3935_E 2 99 001D3935000000000000 "CASHIN CRS: Photosensor roller 5 soiled"
001D_CIN 3936_E 2 99 001D3936000000000000 "CASHIN CRS: Photosensor roller 6 soiled"
001D_CIN 3941_E 2 99 001D3941000000000000 "CASHIN CRS: Filled roller 1 not placed in the right position, or
voltage missing"

U25604-J-Z745-1-7600 May 2011 31

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
001D_CIN 3942_E 2 99 001D3942000000000000 "CASHIN CRS: Filled roller 2 not placed in the right position, or
voltage missing"
001D_CIN 3943_E 2 99 001D3943000000000000 "CASHIN CRS: Filled roller 3 not placed in the right position, or
voltage missing"
001D_CIN 3944_E 2 99 001D3944000000000000 "CASHIN CRS: Filled roller 4 not placed in the right position, or
voltage missing"
001D_CIN 3945_E 2 99 001D3945000000000000 "CASHIN CRS: Filled roller 5 not placed in the right position, or
voltage missing"
001D_CIN 3946_E 2 99 001D3946000000000000 "CASHIN CRS: Filled roller 6 not placed in the right position, or
voltage missing"
001D_CIN A000_E 2 99 001DA000000000000000 "CASHIN CRS: Wrong command"
001D_CIN A100_E 2 99 001DA100000000000000 "CASHIN CRS: Wrong command"
001D_CIN A200_E 2 99 001DA200000000000000 "CASHIN CRS: Programming error"
001D_CIN 3F03_E 2 99 001D3F03000000000000 "CASHIN CRS: Security thread sensor missing, or not installed"
001D_CIN FE38_E 4 99 001DFE38000000000000 "CASHIN CRS: Communication problem"
001D_CIN FE50_E 4 99 001DFE50000000000000 "CASHIN CRS: Communication problem"
001D_CIN FFFF_E 2 99 001DFFFF000000000000 "CASHIN CRS: Extended error code not computed"

32 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Cash Cheque Deposit Module (Classes: 001A/XX1A)

The following table lists the MDS Status codes assigned to the device classes
Cash Cheque Deposit Module (CCDM). Class AA1A is the class IEEE 1394
assigned to device class ChequeInFW. Class BB1A is class IEEE 1394
assigned to device class CashInFW. Class CC1A is class USB assigned to
device class CashInFW. Class DDA is class USB assigned to device class
ChequeInFW.

Refer to section ”Error Class Mapping” on page 5.

Table 6: Cash Cheque Deposit Module (CCDM) (Classes: 001A/XX1A)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
001A DEFA_E 2 99 001ADEFA00000000000000 "CCDM: DEFAULT ERROR"
001A DEFA_W 2 99 001ADEFA00000000000000 "CCDM: DEFAULT WARNING"
001A 0001_E 2 99 001A0001000000000000000 "CCDM: No connection to dispenser module"
001A 0002_E 2 99 001A000200000000000000 "CCDM: No connection to amplifier logic"
001A 0003_E 2 99 001A000300000000000000 "CCDM: No connection to stacker logic"
001A 0014_E 2 99 001A001400000000000000 "CCDM: General firmware error"
001A 0015_E 2 99 001A001500000000000000 "CCDM: Battery on controller board empty"
001A 0016_E 2 99 001A001600000000000000 "CCDM: Safety switch active"
001A 0017_E 2 99 001A001700000000000000 "CCDM: System interface does not fetch the data from the CCDM
fast enough"
001A 0018_E 2 99 001A001800000000000000 "CCDM: Invalid or missing configuration"
001A 0019_E 2 99 001A001900000000000000 "CCDM: The application overloads the CCDM hardware (too
many reset commands per time)"
001A 001E_E 2 99 001A001E00000000000000 "CCDM: Error magnetic character reader"
001A 0028_E 2 99 001A002800000000000000 "CCDM: Error cheque/cash reader"
001A 0029_E 2 99 001A002900000000000000 "CCDM: Firmware error cheque/cash reader"
001A 002A_E 2 99 001A002A00000000000000 "CCDM: Communication problem cheque/cash reader"
001A 002B_E 2 99 001A002B00000000000000 "CCDM: Data error cheque/cash reader"
001A 002C_E 2 99 001A002C00000000000000 "CCDM: Note table configuration not Ok"
001A 002D_E 2 99 001A002D00000000000000 "CCDM: External light in cheque/cash reader"
001A 002F_E 2 99 001A002F00000000000000 "CCDM: Communication problems (time out)"
001A 0030_E 2 99 001A003000000000000000 "CCDM: Communication problems"
001A 0031_E 2 99 001A003100000000000000 "CCDM: Cheque/cash reader firmware and CCDM firmware are
incompatible"
001A 0032_E 2 99 001A003200000000000000 "CCDM: BEB module is defective"
001A 0033_E 2 99 001A003300000000000000 "CCDM: Communication problems with cheque/cash reader"
001A 0034_E 2 99 001A003400000000000000 "CCDM: BEB note table configuration not Ok"
001A 0035_E 2 99 001A003500000000000000 "CCDM: BEB module is defective"
001A 0036_E 2 99 001A003600000000000000 "CCDM: Communication problem from BEB to RS232 interface"
001A 0037_E 2 99 001A003700000000000000 "CCDM: BEB firmware and CCDM firmware are incompatible"
001A 0038_E 2 99 001A003800000000000000 "CCDM: Communication problems RS232 interface <-> BEB
module"
001A 003D_E 2 99 001A003D00000000000000 "CCDM: Error photosensor VLS"
001A 003E_E 2 99 001A003E00000000000000 "CCDM: Error photosensor VLS"
001A 003F_E 2 99 001A003F00000000000000 "CCDM: Error photosensor VLS"
001A 0040_E 2 99 001A004000000000000000 "CCDM: Error photosensor VLS"
001A 0041_E 2 99 001A004100000000000000 "CCDM: Error photosensor VLS1"
001A 0042_E 2 99 001A004200000000000000 "CCDM: Error photosensor ALS"
001A 0043_E 2 99 001A004300000000000000 "CCDM: Error photosensor ALS"
001A 0044_E 2 99 001A004400000000000000 "CCDM: Error photosensor ALS"

U25604-J-Z745-1-7600 May 2011 33

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
001A 0045_E 2 99 001A004500000000000000 "CCDM: Error photosensor ALS"
001A 0046_E 2 99 001A004600000000000000 "CCDM: Error photosensor SLS"
001A 0047_E 2 99 001A004700000000000000 "CCDM: Error photosensor SLS"
001A 0048_E 2 99 001A004800000000000000 "CCDM: Error photosensor ELS"
001A 0049_E 2 99 001A004900000000000000 "CCDM: Error photosensor RLS"
001A 004A_E 2 99 001A004A00000000000000 "CCDM: Error photosensor RLS"
001A 004B_E 2 99 001A004B00000000000000 "CCDM: Error photosensor VLS1"
001A 004C_E 2 99 001A004C00000000000000 "CCDM: Error photosensor ELS"
001A 004D_E 2 99 001A004D00000000000000 "CCDM: Error photosensor VLS10"
001A 0050_E 2 99 001A005000000000000000 "CCDM: Error photosensor KLS"
001A 0051_E 2 99 001A005100000000000000 "CCDM: Error photosensor KLS"
001A 0052_E 2 99 001A005200000000000000 "CCDM: Error photosensor KLS"
001A 0053_E 2 99 001A005300000000000000 "CCDM: Error photosensor KLS1"
001A 0054_E 2 99 001A005400000000000000 "CCDM: Error photosensor KLS2"
001A 0055_E 2 99 001A005500000000000000 "CCDM: Error photosensor KLS3"
001A 0064_E 2 99 001A006400000000000000 "CCDM: Transport error detected before dispensing"
001A 0065_E 2 99 001A006500000000000000 "CCDM: Paper jam detected during separation process"
001A 0066_E 2 99 001A006600000000000000 "CCDM: VLS6: media too long (media do not pass (VLS6)"
001A 0067_E 2 99 001A006700000000000000 "CCDM: VLS7: medium is expected but no media is coming"
001A 0069_E 2 99 001A006900000000000000 "CCDM: VLS7: media do not leave VLS7"
001A 006A_E 2 99 001A006A00000000000000 "CCDM: VLS6: media do not leave VLS6"
001A 006C_E 2 99 001A006C00000000000000 "CCDM: Faulty extraction detected during dispensing process"
001A 006E_E 2 99 001A006E00000000000000 "CCDM: Clearing error I/O tray. Media jam in the intermediary
transport"
001A 006F_E 2 99 001A006F00000000000000 "CCDM: Clearing error I/O tray. Media jam in the I/O transport"
001A 0070_E 2 99 001A007000000000000000 "CCDM: Clearing error I/O tray. Media do not reached VLS"
001A 0071_E 2 99 001A007100000000000000 "CCDM: Clearing error I/O tray. Media jam in the separation area
of the dispense"
001A 0072_E 2 99 001A007200000000000000 "CCDM: Clearing error I/O tray. Media jam in the intermediary
transport"
001A 0073_E 2 99 001A007300000000000000 "CCDM: Clearing error I/O tray. Media jam in the intermediary
transport"
001A 0074_E 2 99 001A007400000000000000 "CCDM: Media jam in reject transport area"
001A 0078_E 2 99 001A007800000000000000 "CCDM: Initialization error hinged transport 1 and/or 2"
001A 0079_E 2 99 001A007900000000000000 "CCDM: Position error hingend transport 1. The end position is not
reached"
001A 007A_E 2 99 001A007A00000000000000 "CCDM: Position error hinged transport 2. The end position is not
reached"
001A 0082_E 2 99 001A008200000000000000 "CCDM: Initialization error during setting the bundle width"
001A 008C_E 2 99 001A008C00000000000000 "CCDM: Error on the cam disk"
001A 008D_E 2 99 001A008D00000000000000 "CCDM: Error on the cam disk"
001A 0090_E 2 99 001A009000000000000000 "CCDM: Shutter cannot be opened/closed."
001A 0091_E 2 99 001A009100000000000000 "CCDM: Error on metal detection module"
001A 0096_E 2 99 001A009600000000000000 "CCDM: VHS1: hardware error thickness measuring station"
001A 0097_E 2 99 001A009700000000000000 "CCDM: VHS1: hardware error thickness measuring station"
001A 0098_E 2 99 001A009800000000000000 "CCDM: Error of hall sensors"
001A 00AA_E 2 99 001A00AA00000000000000 "CCDM: Initialization error of reject transport"
001A 00AB_E 2 99 001A00AB00000000000000 "CCDM: Media jam in the reject transport area"
001A 00B4_E 2 99 001A00B400000000000000 "CCDM: Media jam in reject transport area"
001A 00B5_E 2 99 001A00B500000000000000 "CCDM: Clearing error storage transport. Media did not passed
VLS2"
001A 00B6_E 2 99 001A00B600000000000000 "CCDM: Media jam found in front of VLS12 during reject box
clearing => I/O box"
001A 00B9_E 2 99 001A00B900000000000000 "CCDM: Paper jam detected during separation process"
001A 00BA_E 2 99 001A00BA00000000000000 "CCDM: Paper jam detected during separation process"
001A 00BB_E 2 99 001A00BB00000000000000 "CCDM: Paper jam detected during separation process"
001A 00BC_E 2 99 001A00BC00000000000000 "CCDM: Paper jam detected during separation process"
001A 00BD_E 2 99 001A00BD00000000000000 "CCDM: Paper jam detected during separation process"
001A 00C8_E 2 99 001A00C800000000000000 "CCDM: Media in front oaf ALS1 or ALS1 defect"
001A 00C9_E 2 99 001A00C900000000000000 "CCDM: ALS1: medium is expected but no media is coming"
001A 00CA_E 2 99 001A00CA00000000000000 "CCDM: ALS1: media too long (media do not pass the drum)"
001A 00CB_E 2 99 001A00CB00000000000000 "CCDM: ALS1: media is complete recognized but is too long"
001A 00CC_E 2 99 001A00CC00000000000000 "CCDM: ALS1: media jam in the drum"

34 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
001A 00CD_E 2 99 001A00CD00000000000000 "CCDM: ALS1: Media end is not detected during entering the
drum"
001A 00CE_E 2 99 001A00CE00000000000000 "CCDM: ALS1: Media end do not detected during leaving the
drum"
001A 012D_E 2 99 001A012D00000000000000 "CCDM: Media jam in sensor transport at the 3-way deflector"
001A 012E_E 2 99 001A012E00000000000000 "CCDM: Media jam in sensor transport at the reject deflector"
001A 0136_E 2 99 001A013600000000000000 "CCDM: BEB module not mounted or not properly connected to
the backplane"
001A 0137_E 2 99 001A013700000000000000 "CCDM: SLS3: unexpected media during transport from the
alignment module"
001A 0138_E 2 99 001A013800000000000000 "CCDM: SLS3: unexpected media during transport from the
escrow module"
001A 0139_E 2 99 001A013900000000000000 "CCDM: SLS3: media jam in sensor transport"
001A 0140_E 2 99 001A014000000000000000 "CCDM: SLS1: medium is expected but no media is coming"
001A 0141_E 2 99 001A014100000000000000 "CCDM: SLS1: unexpected document during transport from the
alignment module"
001A 0142_E 2 99 001A014200000000000000 "CCDM: SLS1: unexpected document during transport from the
escrow module"
001A 0143_E 2 99 001A014300000000000000 "CCDM: Document jam in area -> document deflector -> escrow/
reject module"
001A 0144_E 2 99 001A014400000000000000 "CCDM: Cheque/cash reader: unexpected media during transport
from the alignment module"
001A 014A_E 2 99 001A014A00000000000000 "CCDM: Document jam at the escrow module ELS1"
001A 014B_E 2 99 001A014B00000000000000 "CCDM: Document jam between sensor module and cassette/
reject module"
001A 014C_E 2 99 001A014C00000000000000 "CCDM: Document jam between sensor transport and reject
transport"
001A 014D_E 2 99 001A014D00000000000000 "CCDM: Cheque/cash reader: the gap between two media is too
small"
001A 0190_E 2 99 001A019000000000000000 "CCDM: Escrow tape at ELS2 defective"
001A 0191_E 2 99 001A019100000000000000 "CCDM: Escrow tape at ELS3 defective"
001A 0192_E 2 99 001A019200000000000000 "CCDM: Document into escrow not expected"
001A 0193_E 2 99 001A019300000000000000 "CCDM: Failure in ELS1 area"
001A 0194_E 2 99 001A019400000000000000 "CCDM: Document missing or escrow empty"
001A 0195_E 2 99 001A019500000000000000 "CCDM: Gap between two notes too long or jam at escrow unit"
001A 0196_E 2 99 001A019600000000000000 "CCDM: Initialisation not finished in the spezified time"
001A 0197_E 2 99 001A019700000000000000 "CCDM: Document jam at the escrow unit"
001A 01F5_E 2 99 001A01F500000000000000 "CCDM: Incorrect deflector position"
001A 01F6_E 2 99 001A01F600000000000000 "CCDM: Jam between sensor module (paper deflectors) and
before RLS1"
001A 01F7_E 2 99 001A01F700000000000000 "CCDM: Document too short"
001A 01F8_E 2 99 001A01F800000000000000 "CCDM: Document too long"
001A 0258_E 2 99 001A025800000000000000 "CCDM: Document jam at the escrow unit"
001A 0259_E 2 99 001A025900000000000000 "CCDM: RLS1: jam or medium too long"
001A 025A_E 2 99 001A025A00000000000000 "CCDM: RLS1: medium missing at KLS2 (module entry)"
001A 025B_E 2 99 001A025B00000000000000 "CCDM: KLS2: unexpected medium at module entry"
001A 025C_E 2 99 001A025C00000000000000 "CCDM: KLS2: jam or medium too long"
001A 025D_E 2 99 001A025D00000000000000 "CCDM: Incorrect position of deflector in cassette module"
001A 025E_E 2 99 001A025E00000000000000 "CCDM: KLS2: medium to retract box missing"
001A 025F_E 2 99 001A025F00000000000000 "CCDM: Retract cassette: jam or medium too long"
001A 0260_E 2 99 001A026000000000000000 "CCDM: Incorrect position of deflector in cassette module 1"
001A 0261_E 2 99 001A026100000000000000 "CCDM: KLS2: medium to box 1 missing"
001A 0262_E 2 99 001A026200000000000000 "CCDM: Cassette module 1: jam or medium too long"
001A 0263_E 2 99 001A026300000000000000 "CCDM: Incorrect position of deflector in cassette module 2"
001A 0264_E 2 99 001A026400000000000000 "CCDM: KLS2: medium to box 2 missing"
001A 0265_E 2 99 001A026500000000000000 "CCDM: Cassette module 2: jam or medium too long"
001A 0266_E 2 99 001A026600000000000000 "CCDM: Media jam KLS5 - KSM"
001A 0267_E 2 99 001A026700000000000000 "CCDM: Error in cassette 1 during init"
001A 0268_E 2 99 001A026800000000000000 "CCDM: Error in cassette 2 during init"
001A 0269_E 2 99 001A026900000000000000 "CCDM: Error in cassette 1"
001A 026A_E 2 99 001A026A00000000000000 "CCDM: Incorrect position of deflector in transfer unit"
001A 100F_E 2 99 001A100F00000000000000 "CCDM: Device Handler not initialised"
001A 1420_E 2 99 001A142000000000000000 "CCDM: Invalid handle in parameter block"
001A 1421_E 2 99 001A142100000000000000 "CCDM: Illegal device number was transferred when the handle
was created"

U25604-J-Z745-1-7600 May 2011 35

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
001A 1424_E 2 99 001A142400000000000000 "CCDM: Device handler currently locked by another user"
001A 8000_E 2 99 001A800000000000000000 "CCDM: Invalid parameter in command"
001A 8001_E 2 99 001A800100000000000000 "CCDM: No document inserted"
001A 8002_E 2 99 001A800200000000000000 "CCDM: Function CscPrtRead was called, but no MICR mode via
CscPrtControl selected"
001A 8003_E 2 99 001A800300000000000000 "CCDM: The CCDM device handler presumes MS-Windows 2000
or MS-Windows XP"
001A 8004_E 2 99 001A800400000000000000 "CCDM: There is still a document in the scanner"
001A 8005_E 2 99 001A800500000000000000 "CCDM: The CCDM-HW send unknown response to a command"
001A 8006_E 2 99 001A800600000000000000 "CCDM: Cannot open raw file (CCDM.RAW)"
001A 8007_E 2 99 001A800700000000000000 "CCDM: Error writing raw file (CCDM.RAW)"
001A 8008_E 2 99 001A800800000000000000 "CCDM: The shutter could not be opened"
001A 8009_E 2 99 001A800900000000000000 "CCDM: The shutter could not be closed"
001A 800A_E 2 99 001A800A00000000000000 "CCDM: Invalid CRC (check character) received with encrypted
line"
001A 800B_E 2 99 001A800B00000000000000 "CCDM: Wrong value for FRM_LOAD in Registry with
CSCCCDM"
001A 800C_E 2 99 001A800C00000000000000 "CCDM: Firmware loading could not be completed"
001A 800D_E 2 99 001A800D00000000000000 "CCDM: Wrong value for LED, LED_FLASH or LED_FREQ"
001A 800E_E 2 99 001A800E00000000000000 "CCDM: Wrong value for MAX_HEIGHT_CHEQUE,
MAX_HEIGHT_NOTES, MAX_WIDTH_CHEQUE"
001A 800F_E 2 99 001A800F00000000000000 "CCDM: Wrong value for the parameter SCAN_FRONT_RED,
SCAN_FRONT_GREEN"
001A 8010_E 2 99 001A801000000000000000 "CCDM: Wrong value for SHUTTER_BEHAVIOUR in Registry
with CSCCCDM"
001A 8011_E 2 99 001A801100000000000000 "CCDM: The thread which receives the image/signature data
could not started"
001A 8012_E 2 99 001A801200000000000000 "CCDM: The thread which receives the image/signature data
could not stopped"
001A 8013_E 2 99 001A801300000000000000 "CCDM: The pointer "
001A 8014_E 2 99 001A801400000000000000 "CCDM: The transferred cheque data (pointer, length) is illegal"
001A 8015_E 2 99 001A801500000000000000 "CCDM: No cheque number received while dispensing cheques or
sheets"
001A 8016_E 2 99 001A801600000000000000 "CCDM: An error occurred while opening a currency file"
001A 8017_E 2 99 001A801700000000000000 "CCDM: An error occurred while opening a currency file"
001A 8018_E 2 99 001A801800000000000000 "CCDM: The currency file is not dedicated for the installed note
sensor"
001A 8019_E 2 99 001A801900000000000000 "CCDM: A wrong keyword inside a currency file has been
detected"
001A 801A_E 2 99 001A801A00000000000000 "CCDM: The loading of new currency data not possible"
001A 801B_E 2 99 001A801B00000000000000 "CCDM: New currency file loaded during installation"
001A 801C_E 2 99 001A801C00000000000000 "CCDM: Error occurred while opening firmware file"
001A 801D_E 2 99 001A801D00000000000000 "CCDM: Error occured while reading sensor firmware file"
001A 801E_E 2 99 001A801E00000000000000 "CCDM: Firmware file is not dedicated for the installed sensor"
001A 801F_E 2 99 001A801F00000000000000 "CCDM: Wrong value for SENS_FRM_LOAD in Registry with
CSCCCDM"
001A 8020_E 2 99 001A802000000000000000 "CCDM: Not possible to read the current note table from the note
sensor"
001A 8021_E 2 99 001A802100000000000000 "CCDM: Too much notes inserted"
001A 8022_E 2 99 001A802200000000000000 "CCDM: Timeout while waiting for signature ID"
001A 8023_E 2 99 001A802300000000000000 "CCDM: Number of detected cheques on ESCROW and number
of scanned cheques different"
001A 8024_E 2 99 001A802400000000000000 "CCDM: Error in previous transaction"
001A 8025_E 2 99 001A802500000000000000 "CCDM: Error in previous transaction"
001A 8026_E 2 99 001A802600000000000000 "CCDM: Error occurred while opening a sensor firmware file"
001A 8027_E 2 99 001A802700000000000000 "CCDM: Error occured while reading a CCDM firmware file"
001A 8028_E 2 99 001A802800000000000000 "CCDM: The firmware file is not valid for the current CCDM
hardware"
001A 8030_E 2 99 001A803000000000000000 "CCDM: The checksum of the signature data of a note is wrong"
001A 8031_E 2 99 001A803100000000000000 "CCDM: Invalid storing exceptions"
001A 9201_E 2 99 001A920100000000000000 "CCDM: Illegal arguments calling IMACON.DLL"
001A 9202_E 2 99 001A920200000000000000 "CCDM: Cannot open input file"
001A 9203_E 2 99 001A920300000000000000 "CCDM: Error reading input"
001A 9204_E 2 99 001A920400000000000000 "CCDM: Cannot open output file"
001A 9205_E 2 99 001A920500000000000000 "CCDM: Error writing output file"

36 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
001A 9206_E 2 99 001A920600000000000000 "CCDM: Not enough memory"
001A 9207_E 2 99 001A920700000000000000 "CCDM: Image too long"
001A 9208_E 2 99 001A920800000000000000 "CCDM: Image too large (for TIF)"
001A 9209_E 2 99 001A920900000000000000 "CCDM: Image too small (<1 row)"
001A 920A_E 2 99 001A920A00000000000000 "CCDM: Error in final conversion step"
001A 920B_E 2 99 001A920B00000000000000 "CCDM: Error in temp file access"
001A 920C_E 2 99 001A920C00000000000000 "CCDM: Error loading imareco.dll"
001A 92E0_E 2 99 001A92E000000000000000 "CCDM: IMACON.DLL returns an error while generation of JPG
image"
001A 92FF_E 2 99 001A92FF00000000000000 "CCDM: IMACON.DLL returned undefined error"
001A 9300_E 2 99 001A930000000000000000 "CCDM: Internal error while calling DQF.DLL"
001A 9301_E 2 99 001A930100000000000000 "CCDM: Internal error while calling DQF.DLL"
001A 9302_E 2 99 001A930200000000000000 "CCDM: Internal error while calling DQF.DLL"
001A 9303_E 2 99 001A930300000000000000 "CCDM: Internal error while calling DQF.DLL"
001A 9304_E 2 99 001A930400000000000000 "CCDM: Internal error while calling DQF.DLL"
001A 9305_E 2 99 001A930500000000000000 "CCDM: Internal error while calling DQF.DLL"
001A 93FF_E 2 99 001A93FF00000000000000 "CCDM: DQF.DLL returned undefined error"
001A E000_E 2 99 001AE00000000000000000 "CCDM: Tray operating error (e.g. banknotes not correct
inserted)"
001A E001_E 2 99 001AE00100000000000000 "CCDM: Sheets not inserted in the given time period (reported by
CscwCcdmEntry(...))"
001A E002_E 2 99 001AE00200000000000000 "CCDM: Some or all notes or checks not taken by the consumer"
001A E003_E 2 99 001AE00300000000000000 "CCDM: Some or all notes or checks not taken by the consumer
while retract to IO or box"
001A E004_E 2 99 001AE00400000000000000 "CCDM: Sheets available in the IO tray, e.g. rejected notes or
cheques after dispensing"
001A E009_E 2 99 001AE00900000000000000 "CCDM: A CCDM-Boot has been initiated by the operator"
001A E00A_E 2 99 001AE00A00000000000000 "CCDM: Loaded firmware older than the firmware found on disk"
001A E00B_E 2 99 001AE00B00000000000000 "CCDM: There is no firmware loaded in the CCCDM"
001A E00C_E 2 99 001AE00C00000000000000 "CCDM: Device handler was configured to switch LEDs when
customer action is neccessary"
001A E00E_E 2 99 001AE00E00000000000000 "CCDM: The currently existing note table has not been loaded by
CSC-W32"
001A E010_E 2 99 001AE01000000000000000 "CCDM: Return of the function CscCcdmInit() if a new currency file
has been detected"
001A E011_E 2 99 001AE01100000000000000 "CCDM: Returned by the function CscCcdmInit() if a new currency
file has been detected"
001A E014_E 2 99 001AE01400000000000000 "CCDM: One or more new firmware loaded automatically by the
Device Handler"
001A E015_E 2 99 001AE01500000000000000 "CCDM: Current loaded note table inconsistant to sensor
Firmware"
001A E016_E 2 99 001AE01600000000000000 "CCDM: Registry parameter CASS_CONFIG is not correct"
001A F000_E 2 99 001AF00000000000000000 "CCDM: The firmware is not loaded in the CCDM"
001A F001_E 2 99 001AF00100000000000000 "CCDM: The parameters of the command have a wrong syntax"
001A F002_E 2 99 001AF00200000000000000 "CCDM: One of the locks is active or an error occurred that
requires correction"
001A F003_E 2 99 001AF00300000000000000 "CCDM: An error occurred during the execution of the command"
001A F004_E 2 99 001AF00400000000000000 "CCDM: The safe door must be open for the execution of the
actual command"
001A F005_E 2 99 001AF00500000000000000 "CCDM: The command cannot be executed at this point of time"
001A F006_E 2 99 001AF00600000000000000 "CCDM: The application program tried to dispense a bundle, but
the IO-tray is empty"
001A F007_E 2 99 001AF00700000000000000 "CCDM: Customer did not remove the bundle until the command
has timed out"
001A F008_E 2 99 001AF00800000000000000 "CCDM: Cheques or sheets are not correct inserted"
001A F009_E 2 99 001AF00900000000000000 "CCDM: CCDM firmware initiated a boot"
001A F00A_E 2 99 001AF00A00000000000000 "CCDM: Note sensor module reports hardware error"
001A F00B_E 2 99 001AF00B00000000000000 "CCDM: Note sensor module reports firmware error"
001A F00C_E 2 99 001AF00C00000000000000 "CCDM: Comunication error reported by the sensor module"
001A F00D_E 2 99 001AF00D00000000000000 "CCDM: Note sensor hase detected an error in the data format"
001A F00E_E 2 99 001AF00E00000000000000 "CCDM: Note sensor has detected an error in the note table"
001A F00F_E 2 99 001AF00F00000000000000 "CCDM: The assignment of a note is wrong"
001A F010_E 2 99 001AF01000000000000000 "CCDM: The sensor couldn't read the document (note or cheque)"
001A F011_E 2 99 001AF01100000000000000 "CCDM: An error occured during downloding of firmware or
currency data"

U25604-J-Z745-1-7600 May 2011 37

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
001A F012_E 2 99 001AF01200000000000000 "CCDM: The sensor responded with an unknown error code"
001A F0A0_E 2 99 001AF0A000000000000000 "CCDM: Bundle with detected metal in tray"
001A F0A1_E 2 99 001AF0A100000000000000 "CCDM: Tray is occupied with not dispensable notes or cheques"
001A F0A2_E 2 99 001AF0A200000000000000 "CCDM: A not specified tray error occurred"
001A F0A3_E 2 99 001AF0A300000000000000 "CCDM: Shutter error while command CscCcdmCashIn"
001A F0A4_E 2 99 001AF0A400000000000000 "CCDM: CscCcdmTransport command received, but the
ESCROW is empty"
001A F0A5_E 2 99 001AF0A500000000000000 "CCDM: ESCROW full while dispending a bundle"
001A F0A6_E 2 99 001AF0A600000000000000 "CCDM: Cheques or sheets on ESCROW while performing the
next transaction"
001A F0A7_E 2 99 001AF0A700000000000000 "CCDM: Cheques or notes jammed on the ESCROW"
001A F0A8_E 2 99 001AF0A800000000000000 "CCDM: There exists no hardware equipment to perform the
requested command"
001A F0A9_E 2 99 001AF0A900000000000000 "CCDM: Sheets detected in front of IO tray before shutter open"
AA1A DEFA_E 4 99 AA1ADEFA "IEEE1394/CCDM_CHQ: Default error"
AA1A DEFA_W 4 99 AA1ADEFA "IEEE1394/CCDM_CHQ: Default warning"
AA1A 0020_E 2 99 AA1A0020 "IEEE1394/CCDM_CHQ: I1394 protocol timeout"
AA1A FE09_E 4 99 AA1AFE09 "IEEE1394/CCDM_CHQ: IEEE 1394 read command could not be
executed in the specified monitoring time"
AA1A FE0A_E 4 99 AA1AFE0A "IEEE1394/CCDM_CHQ: A IEEE 1394 read command is
cancelled by the user"
AA1A FE9C_E 4 99 AA1AFE9C "IEEE1394/CCDM_CHQ: The length in DataSize is 0 (zero)"
AA1A FE9E_E 4 99 AA1AFE9E "IEEE1394/CCDM_CHQ: The I1394_TS.DLL could not be
opened"
AA1A FEA0_E 4 99 AA1AFEA0 "IEEE1394/CCDM_CHQ: The I1394_UB.DLL could not be
opened"
AA1A 0210_E 4 99 AA1A0210 "IEEE1394/CCDM_CHQ: Internal driver error: Device is not in
working state"
AA1A 0305_E 4 99 AA1A0305 "IEEE1394/CCDM_CHQ: Internal driver error: Size of buffer is
invalid"
AA1A 8010_E 4 99 AA1A8010 "IEEE1394/CCDM_CHQ: Internal driver error: No such device
instance"
AA1A 0100_E 4 99 AA1A0100 "IEEE1394/CCDM_CHQ: Internal driver error: The operation was
cancelled/aborted"
AA1A 0200_E 4 99 AA1A0200 "IEEE1394/CCDM_CHQ: Internal driver error: A non-critical error
occurred on the adapter"
AA1A 0250_E 4 99 AA1A0250 "IEEE1394/CCDM_CHQ: Internal driver error: The application has
already opened the specified adapter"
AA1A 0270_E 4 99 AA1A0270 "IEEE1394/CCDM_CHQ: Internal driver error: The operation was
cancelled because more bus resets"
AA1A 0300_E 4 99 AA1A0300 "IEEE1394/CCDM_CHQ: Internal driver error: The operation was
cancelled because a 1394 bus reset"
AA1A 0370_E 4 99 AA1A0370 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 0500_E 4 99 AA1A0500 "IEEE1394/CCDM_CHQ: Internal driver error: The operation
requested failed because the local adapter is busy"
AA1A 0572_E 4 99 AA1A0572 "IEEE1394/CCDM_CHQ: Internal driver error."
AA1A 0600_E 4 99 AA1A0600 "IEEE1394/CCDM_CHQ: Internal driver error: The driver detected
a bug in its execution logic"
AA1A 0639_E 4 99 AA1A0639 "IEEE1394/CCDM_CHQ: Internal driver error: The isochronous
channel number is already in use"
AA1A 0645_E 4 99 AA1A0645 "IEEE1394/CCDM_CHQ: Internal driver error: An isochronous
operation failed because of a FIFO"
AA1A 0658_E 4 99 AA1A0658 "IEEE1394/CCDM_CHQ: Internal driver error: An isochronous
operation failed because of a FIFO underrun"
AA1A 0671_E 4 99 AA1A0671 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 06B2_E 4 99 AA1A06B2 "IEEE1394/CCDM_CHQ: Internal driver error: An outgoing
response packet is not valid"
AA1A 0700_E 4 99 AA1A0700 "IEEE1394/CCDM_CHQ: Internal driver error: An operation failed
due to some lack of resources other"
AA1A 0900_E 4 99 AA1A0900 "IEEE1394/CCDM_CHQ: Internal driver error: The operation
requested is not applicable to the channel"
AA1A 0A00_E 4 99 AA1A0A00 "IEEE1394/CCDM_CHQ: Internal driver error: The operation
requested is not possible at the channel's current state"
AA1A 0C00_E 4 99 AA1A0C00 "IEEE1394/CCDM_CHQ: Internal driver error: Adapters not
identified"
AA1A 0D00_E 4 99 AA1A0D00 "IEEE1394/CCDM_CHQ: Internal driver error: A validation check
on a number of isochronous buffers failed"

38 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
AA1A 0D47_E 4 99 AA1A0D47 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 0F00_E 4 99 AA1A0F00 "IEEE1394/CCDM_CHQ: Internal driver error: The request
passed to the miniport was invalid"
AA1A 0F50_E 4 99 AA1A0F50 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 0F73_E 4 99 AA1A0F73 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 1070_E 4 99 AA1A1070 "IEEE1394/CCDM_CHQ: Internal driver error: The requested item
was not found"
AA1A 1100_E 4 99 AA1A1100 "IEEE1394/CCDM_CHQ: Internal driver error: The request valid,
but adapter does not support the required functionality"
AA1A 1200_E 4 99 AA1A1200 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 1300_E 4 99 AA1A1300 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 1313_E 4 99 AA1A1313 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 132A_E 4 99 AA1A132A "IEEE1394/CCDM_CHQ: Internal driver error: The request cannot
be transmitted"
AA1A 1350_E 4 99 AA1A1350 "IEEE1394/CCDM_CHQ: Internal driver error: The request cannot
be transmitted"
AA1A 1409_E 4 99 AA1A1409 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 1433_E 4 99 AA1A1433 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 1450_E 4 99 AA1A1450 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 1500_E 4 99 AA1A1500 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 0001_E 4 99 AA1A0001 "IEEE1394/CCDM_CHQ: Internal driver error: Operation failed"
AA1A 0010_E 4 99 AA1A0010 "IEEE1394/CCDM_CHQ: Internal driver error: Operation not
supported"
AA1A 0030_E 4 99 AA1A0030 "IEEE1394/CCDM_CHQ: Internal driver error: Operation rejected"
AA1A 0110_E 4 99 AA1A0110 "IEEE1394/CCDM_CHQ: Internal driver error: Packet pool empty"
AA1A 0220_E 4 99 AA1A0220 "IEEE1394/CCDM_CHQ: Internal driver error: Requested power
state transition not allowed"
AA1A 0280_E 4 99 AA1A0280 "IEEE1394/CCDM_CHQ: Internal driver error: Operation rejected,
device is powered down"
AA1A 0302_E 4 99 AA1A0302 "IEEE1394/CCDM_CHQ: Internal driver error: Invalid IO control
code"
AA1A 0304_E 4 99 AA1A0304 "IEEE1394/CCDM_CHQ: Internal driver error: Requested byte
count does not match buffer size"
AA1A 0310_E 4 99 AA1A0310 "IEEE1394/CCDM_CHQ: Internal driver error: Input buffer too
small"
AA1A 0320_E 4 99 AA1A0320 "IEEE1394/CCDM_CHQ: Internal driver error: Output buffer too
small"
AA1A 0340_E 4 99 AA1A0340 "IEEE1394/CCDM_CHQ: Internal driver error: Handle already
used by an object of this type"
AA1A 0341_E 4 99 AA1A0341 "IEEE1394/CCDM_CHQ: Internal driver error: Handle already
used by an object of another type"
AA1A 0342_E 4 99 AA1A0342 "IEEE1394/CCDM_CHQ: Internal driver error: Handle not
associated with required object"
AA1A 0350_E 4 99 AA1A0350 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 0351_E 4 99 AA1A0351 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 0400_E 4 99 AA1A0400 "IEEE1394/CCDM_CHQ: Internal driver error: Invalid configu-
ration info type"
AA1A 0401_E 4 99 AA1A0401 "IEEE1394/CCDM_CHQ: Internal driver error: Invalid local host
info type"
AA1A 0402_E 4 99 AA1A0402 "IEEE1394/CCDM_CHQ: Internal driver error: Invalid local host
property type"
AA1A 0403_E 4 99 AA1A0403 "IEEE1394/CCDM_CHQ: Internal driver error: Unsupported type
of lock operation"
AA1A 0404_E 4 99 AA1A0404 "IEEE1394/CCDM_CHQ: Internal driver error: Unsupported
speed selected"
AA1A 1420_E 2 99 AA1A1420 "IEEE1394/CCDM_CHQ: Invalid handle in parameter block"
AA1A 1421_E 2 99 AA1A1421 "IEEE1394/CCDM_CHQ: Illegal device number was transferred
when the handle was created"
AA1A 1424_E 2 99 AA1A1424 "IEEE1394/CCDM_CHQ: Device handler currently locked by
another user"
AA1A 8000_E 2 99 AA1A8000 "IEEE1394/CCDM_CHQ: Invalid parameter in command"
AA1A 8001_E 2 99 AA1A8001 "IEEE1394/CCDM_CHQ: No document inserted"
AA1A 8002_E 4 99 AA1A8002 "IEEE1394/CCDM_CHQ: Internal driver error: Device not open"
AA1A 8003_E 4 99 AA1A8003 "IEEE1394/CCDM_CHQ: Internal driver error: Request timeout
interval has expired"
AA1A 8008_E 4 99 AA1A8008 "IEEE1394/CCDM_CHQ: Internal driver error: Invalid parameter
in function call"

U25604-J-Z745-1-7600 May 2011 39

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
AA1A 8020_E 4 99 AA1A8020 "IEEE1394/CCDM_CHQ: Internal driver error: Memory allocation
failed"
AA1A FE09_E 4 99 AA1AFE09 "IEEE1394/CCDM_CHQ: IEEE 1394 read command could not be
executed in the specified monitoring time"
AA1A FE0A_E 4 99 AA1AFE0A "IEEE1394/CCDM_CHQ: A IEEE 1394 read command is
cancelled by the user"
AA1A FE89_E 2 99 AA1AFE8900000000000000 "IEEE1394/CCDM_CIN: The pointer "pData" is illegal"
AA1A FE9D_E 2 99 AA1AFE9D00000000000000 "IEEE1394/CCDM_CIN: The I1394_TS.DLL could not be found in
the PATH. Normally <CSCROOT>\DLL"
AA1A FE9F_E 2 99 AA1AFE9F00000000000000 "IEEE1394/CCDM_CIN: The I1394_UB.DLL could not be found in
the PATH. Normally <CSCROOT>\DLL"
AA1A FEA1_E 2 99 AA1AFEA100000000000000 "IEEE1394/CCDM_CIN: The I1394_UB.DLL could not be opened"
BB1A DEFA_E 4 99 BB1ADEFA00000000000000 "IEEE1394/CCDM_CIN: Default error"
BB1A DEFA_W 4 99 BB1ADEFA00000000000000 "IEEE1394/CCDM_CIN: Default warning"
BB1A 0020_E 2 99 BB1A002000000000000000 "IEEE1394/CCDM_CIN: I1394 protocol timeout"
BB1A FE09_E 4 99 BB1AFE0900000000000000 "IEEE1394/CCDM_CIN: IEEE 1394 read command could not be
executed in the specified monitoring time"
BB1A FE0A_E 4 99 BB1AFE0A00000000000000 "IEEE1394/CCDM_CIN: A IEEE 1394 read command is cancelled
by the user"
BB1A FE89_E 2 99 BB1AFE8900000000000000 "IEEE1394/CCDM_CIN: The pointer "pData" is illegal"
BB1A FE9C_E 4 99 BB1AFE9C00000000000000 "IEEE1394/CCDM_CIN: The length in DataSize is 0 (zero)"
BB1A FE9D_E 2 99 BB1AFE9D00000000000000 "IEEE1394/CCDM_CIN: The I1394_TS.DLL could not be found in
the PATH. Normally <CSCROOT>\DLL"
BB1A FE9E_E 4 99 BB1AFE9E00000000000000 "IEEE1394/CCDM_CIN: The I1394_TS.DLL could not be opened"
BB1A FE9F_E 2 99 BB1AFE9F00000000000000 "IEEE1394/CCDM_CIN: The I1394_UB.DLL could not be found in
the PATH. Normally <CSCROOT>\DLL"
BB1A FEA0_E 4 99 BB1AFEA000000000000000 "IEEE1394/CCDM_CIN: The I1394_UB.DLL could not be opened"
BB1A FEA1_E 2 99 BB1AFEA100000000000000 "IEEE1394/CCDM_CIN: The I1394_UB.DLL could not be opened"
BB1A 0210_E 4 99 BB1A021000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Device is not in
working state"
BB1A 0305_E 4 99 BB1A030500000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Size of buffer is
invalid"
BB1A 8010_E 4 99 BB1A801000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: No such device
instance"
BB1A 0100_E 4 99 BB1A010000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: The operation was
cancelled/aborted"
BB1A 0250_E 4 99 BB1A025000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: The application has
already opened the specified adapter"
BB1A 0270_E 4 99 BB1A027000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: The operation was
cancelled because more bus resets"
BB1A 0300_E 4 99 BB1A030000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: The operation was
cancelled because a 1394 bus reset"
BB1A 0370_E 4 99 BB1A037000000000000000 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 0500_E 4 99 BB1A050000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: The operation
requested failed because the local adapter is busy"
BB1A 0572_E 4 99 BB1A057200000000000000 "IEEE1394/CCDM_CIN: Internal driver error."
BB1A 0600_E 4 99 BB1A060000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: The driver detected
a bug in its execution logic"
BB1A 0639_E 4 99 BB1A063900000000000000 "IEEE1394/CCDM_CIN: Internal driver error: The isochronous
channel number is already in use"
BB1A 0645_E 4 99 BB1A064500000000000000 "IEEE1394/CCDM_CIN: Internal driver error: An isochronous
operation failed because of a FIFO"
BB1A 0658_E 4 99 BB1A065800000000000000 "IEEE1394/CCDM_CIN: Internal driver error: An isochronous
operation failed because of a FIFO underrun"
BB1A 0671_E 4 99 BB1A067100000000000000 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 06B2_E 4 99 BB1A06B200000000000000 "IEEE1394/CCDM_CIN: Internal driver error: An outgoing
response packet is not valid"
BB1A 0700_E 4 99 BB1A070000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: An operation failed
due to some lack of resources other"
BB1A 0900_E 4 99 BB1A090000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: The operation
requested is not applicable to the channel"
BB1A 0A00_E 4 99 BB1A0A0000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: The operation
requested is not possible at the channel's current state"
BB1A 0C00_E 4 99 BB1A0C0000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Adapters not
identified"
BB1A 0D00_E 4 99 BB1A0D0000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: A validation check
on a number of isochronous buffers failed"

40 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
BB1A 0D47_E 4 99 BB1A0D4700000000000000 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 0F00_E 4 99 BB1A0F0000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: The request passed
to the miniport was invalid"
BB1A 0F50_E 4 99 BB1A0F5000000000000000 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 0F73_E 4 99 BB1A0F7300000000000000 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 1070_E 4 99 BB1A107000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: The requested item
was not found"
BB1A 1100_E 4 99 BB1A110000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: The request valid,
but adapter does not support the required functionality"
BB1A 1200_E 4 99 BB1A120000000000000000 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 1300_E 4 99 BB1A130000000000000000 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 1313_E 4 99 BB1A131300000000000000 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 132A_E 4 99 BB1A132A00000000000000 "IEEE1394/CCDM_CIN: Internal driver error: The request cannot
be transmitted"
BB1A 1350_E 4 99 BB1A135000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: The request cannot
be transmitted"
BB1A 1409_E 4 99 BB1A140900000000000000 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 1433_E 4 99 BB1A143300000000000000 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 1450_E 4 99 BB1A145000000000000000 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 1500_E 4 99 BB1A150000000000000000 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 0001_E 4 99 BB1A000100000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Operation failed"
BB1A 0010_E 4 99 BB1A001000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Operation not
supported"
BB1A 0030_E 4 99 BB1A003000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Operation rejected"
BB1A 0110_E 4 99 BB1A011000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Packet pool empty"
BB1A 0200_E 4 99 BB1A020000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Device is removed"
BB1A 0220_E 4 99 BB1A022000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Requested power
state transition not allowed"
BB1A 0280_E 4 99 BB1A028000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Operation rejected,
device is powered down"
BB1A 0302_E 4 99 BB1A030200000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Invalid IO control
code"
BB1A 0304_E 4 99 BB1A030400000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Requested byte
count does not match buffer size"
BB1A 0310_E 4 99 BB1A031000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Input buffer too
small"
BB1A 0320_E 4 99 BB1A032000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Output buffer too
small"
BB1A 0340_E 4 99 BB1A034000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Handle already used
by an object of this type"
BB1A 0341_E 4 99 BB1A034100000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Handle already used
by an object of another type"
BB1A 0342_E 4 99 BB1A034200000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Handle not
associated with required object"
BB1A 0350_E 4 99 BB1A035000000000000000 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 0351_E 4 99 BB1A035100000000000000 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 0400_E 4 99 BB1A040000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Invalid configuration
info type"
BB1A 0401_E 4 99 BB1A040100000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Invalid local host info
type"
BB1A 0402_E 4 99 BB1A040200000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Invalid local host
property type"
BB1A 0403_E 4 99 BB1A040300000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Unsupported type of
lock operation"
BB1A 0404_E 4 99 BB1A040400000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Unsupported speed
selected"
BB1A 1420_E 2 99 BB1A142000000000000000 "IEEE1394/CCDM_CIN: Invalid handle in parameter block"
BB1A 1421_E 2 99 BB1A142100000000000000 "IEEE1394/CCDM_CIN: Illegal device number was transferred
when the handle was created"
BB1A 1424_E 2 99 BB1A142400000000000000 "IEEE1394/CCDM_CIN: Device handler currently locked by
another user"
BB1A 8000_E 2 99 BB1A800000000000000000 "IEEE1394/CCDM_CIN: Invalid parameter in command"
BB1A 8001_E 2 99 BB1A800100000000000000 "IEEE1394/CCDM_CIN: No document inserted"
BB1A 8002_E 4 99 BB1A800200000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Device not open"
BB1A 8003_E 4 99 BB1A800300000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Request timeout
interval has expired"

U25604-J-Z745-1-7600 May 2011 41

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
BB1A 8008_E 4 99 BB1A800800000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Invalid parameter in
function call"
BB1A 8020_E 4 99 BB1A802000000000000000 "IEEE1394/CCDM_CIN: Internal driver error: Memory allocation
failed"
CC1A DEFA_W 4 99 CC1ADEFA00000000000000 "USB/CCDM_CIN: DEFAULT_WARNING"
CC1A DEFA_E 4 99 CC1ADEFA00000000000000 "USB/CCDM_CIN: DEFAULT_ERROR"
CC1A 8000_E 4 99 CC1A800000000000000000 "USB/CCDM_CIN: Unexpected descriptor was reported from USB
device"
CC1A 8001_E 4 99 CC1A800100000000000000 "USB/CCDM_CIN: Device not found"
CC1A 8002_E 4 99 CC1A800200000000000000 "USB/CCDM_CIN: Not enough memory available"
CC1A 8003_E 4 99 CC1A800300000000000000 "USB/CCDM_CIN: It was no endpoint found in the descriptor"
CC1A 8004_E 4 99 CC1A800400000000000000 "USB/CCDM_CIN: The creation of the list of USB devices failed"
CC1A FE09_E 4 99 CC1AFE0900000000000000 "USB/CCDM_CIN: USB read command could not be executed in
the specified monitoring time"
CC1A FE0A_E 4 99 CC1AFE0A00000000000000 "USB/CCDM_CIN: USB READ command is cancelled by the user"
CC1A FE89_E 4 99 CC1AFE8900000000000000 "USB/CCDM_CIN: The pointer pData is illegal"
CC1A FE9C_E 4 99 CC1AFE9C00000000000000 "USB/CCDM_CIN: The length in DataSize is 0 (zero)"
CC1A 0001_E 4 99 CC1A000100000000000000 "USB/CCDM_CIN: CRC error has been detected"
CC1A 0002_E 4 99 CC1A000200000000000000 "USB/CCDM_CIN: Bit stuffing error has been detected"
CC1A 0003_E 4 99 CC1A000300000000000000 "USB/CCDM_CIN: DATA toggle mismatch has been detected"
CC1A 0004_E 4 99 CC1A000400000000000000 "USB/CCDM_CIN: STALLPID has been detected, error is
reported by the USB host controller"
CC1A 0005_E 4 99 CC1A000500000000000000 "USB/CCDM_CIN: USB device is not responding, error is reported
by the USB host"
CC1A 0006_E 4 99 CC1A000600000000000000 "USB/CCDM_CIN: PID check has failed, error is reported by the
USB host controller"
CC1A 0007_E 4 99 CC1A000700000000000000 "USB/CCDM_CIN: Unexpected PID detected, error is reported by
the USB host"
CC1A 0008_E 4 99 CC1A000800000000000000 "USB/CCDM_CIN: Data overrun error detected, error is reported
by the USB host"
CC1A 0009_E 4 99 CC1A000900000000000000 "USB/CCDM_CIN: Data underrun error detected, error is reported
by the USB host"
CC1A 000A_E 4 99 CC1A000A00000000000000 "USB/CCDM_CIN: Error code is reserved by the USB host
controller driver"
CC1A 000B_E 4 99 CC1A000B00000000000000 "USB/CCDM_CIN: Error code is reserved by the USB host
controller driver"
CC1A 000C_E 4 99 CC1A000C00000000000000 "USB/CCDM_CIN: Buffer overrun has been detected, error is
reported by the USB host"
CC1A 000D_E 4 99 CC1A000D00000000000000 "USB/CCDM_CIN: Buffer underrun has been detected, error is
reported by the USB host"
CC1A 000F_E 4 99 CC1A000F00000000000000 "USB/CCDM_CIN: Buffer was not accessed, error is reported by
the USB host"
CC1A 0010_E 4 99 CC1A001000000000000000 "USB/CCDM_CIN: FIFO error has been detected, PCI bus latency
was too long"
CC1A 0011_E 4 99 CC1A001100000000000000 "USB/CCDM_CIN: XACT error has been detected, error is
reported by the USB host"
CC1A 0012_E 4 99 CC1A001200000000000000 "USB/CCDM_CIN: Device is babbling, data transfer phase
exceeds the USB frame length"
CC1A 0013_E 4 99 CC1A001300000000000000 "USB/CCDM_CIN: Data buffer error has been detected, error is
reported by the USB host"
CC1A 0030_E 4 99 CC1A003000000000000000 "USB/CCDM_CIN: Endpoint has been halted by the USB bus
driver USBD"
CC1A 0100_E 4 99 CC1A010000000000000000 "USB/CCDM_CIN: Memory allocation attempt has failed, error is
reported by the USB bus"
CC1A 0200_E 4 99 CC1A020000000000000000 "USB/CCDM_CIN: Invalid URB function code has been passed,
error is reported by the USB"
CC1A 0300_E 4 99 CC1A030000000000000000 "USB/CCDM_CIN: Invalid parameter has been passed, error is
reported by the USB bus"
CC1A 0400_E 4 99 CC1A040000000000000000 "USB/CCDM_CIN: There are data transfer requests pending for
the device"
CC1A 0500_E 4 99 CC1A050000000000000000 "USB/CCDM_CIN: Request has failed, error is reported by the
USB bus driver USBD"
CC1A 0600_E 4 99 CC1A060000000000000000 "USB/CCDM_CIN: Invalid pipe handle has been passed, error is
reported by the USB bus"
CC1A 0700_E 4 99 CC1A070000000000000000 "USB/CCDM_CIN: There is not enough bandwidth available, error
is reported by the USB bus"

42 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
CC1A 0800_E 4 99 CC1A080000000000000000 "USB/CCDM_CIN: Internal host controller error has been
detected"
CC1A 0900_E 4 99 CC1A090000000000000000 "USB/CCDM_CIN: Short transfer has been detected, error is
reported by the USB bus"
CC1A 0A00_E 4 99 CC1A0A0000000000000000 "USB/CCDM_CIN: Bad start frame has been specified, error is
reported by the USB bus"
CC1A 0B00_E 4 99 CC1A0B0000000000000000 "USB/CCDM_CIN: Asynchronous request has failed, error is
reported by the USB bus driver"
CC1A 0C00_E 4 99 CC1A0C0000000000000000 "USB/CCDM_CIN: USB frame control is currently owned, error is
reported by the USB bus"
CC1A 0D00_E 4 99 CC1A0D0000000000000000 "USB/CCDM_CIN: USB frame control is currently not owned, error
is reported by the USB"
CC1A 0E00_E 4 99 CC1A0E0000000000000000 "USB/CCDM_CIN: Operation is not supported, error is reported by
the USB bus driver"
CC1A 0F00_E 4 99 CC1A0F0000000000000000 "USB/CCDM_CIN: Invalid configuration descriptor was reported
by the device"
CC1A 1000_E 4 99 CC1A100000000000000000 "USB/CCDM_CIN: Operation has failed, error is reported by the
USBIO driver"
CC1A 1001_E 4 99 CC1A100100000000000000 "USB/CCDM_CIN: Invalid input buffer has been passed to an
IOCTL operation"
CC1A 1002_E 4 99 CC1A100200000000000000 "USB/CCDM_CIN: Invalid output buffer has been passed to an
IOCTL operation"
CC1A 1003_E 4 99 CC1A100300000000000000 "USB/CCDM_CIN: There is not enough system memory available
to complete the operation"
CC1A 1004_E 4 99 CC1A100400000000000000 "USB/CCDM_CIN: There are read or write requests pending, error
is reported by the USBIO"
CC1A 1005_E 4 99 CC1A100500000000000000 "USB/CCDM_CIN: USB device is already configured, error is
reported by the USBIO"
CC1A 1006_E 4 99 CC1A100600000000000000 "USB/CCDM_CIN: The USB device is not configured, error is
reported by the USBIO driver"
CC1A 1007_E 4 99 CC1A100700000000000000 "USB/CCDM_CIN: There are open pipes, error is reported by the
USBIO driver"
CC1A 1008_E 4 99 CC1A100800000000000000 "USB/CCDM_CIN: Either the handle is already bound to a pipe"
CC1A 1009_E 4 99 CC1A100900000000000000 "USB/CCDM_CIN: Handle is not bound to a pipe, error is reported
by the USBIO driver"
CC1A 100A_E 4 99 CC1A100A00000000000000 "USB/CCDM_CIN: USB device has been removed from the
system"
CC1A 100B_E 4 99 CC1A100B00000000000000 "USB/CCDM_CIN: Specified control code is not supported"
CC1A 100C_E 4 99 CC1A100C00000000000000 "USB/CCDM_CIN: Operation has been timed out, error is reported
by the USBIO driver"
CC1A 100D_E 4 99 CC1A100D00000000000000 "USB/CCDM_CIN: Invalid recipient has been specified"
CC1A 100E_E 4 99 CC1A100E00000000000000 "USB/CCDM_CIN: Either an invalid request type has been
specified"
CC1A 100F_E 4 99 CC1A100F00000000000000 "USB/CCDM_CIN: Invalid IOCTL code has been specified, error
is reported by the USBIO"
CC1A 1010_E 4 99 CC1A101000000000000000 "USB/CCDM_CIN: Direction of the data transfer request is not
supported by that pipe"
CC1A 1011_E 4 99 CC1A101100000000000000 "USB/CCDM_CIN: Number of asynchronous data packets
specified in an asynchronous read"
CC1A 1012_E 4 99 CC1A101200000000000000 "USB/CCDM_CIN: Memory resources are exhausted. This error is
reported by the USBIO driver"
CC1A 1013_E 4 99 CC1A101300000000000000 "USB/CCDM_CIN: The specified pipe was not found in the current
configuration"
CC1A 1014_E 4 99 CC1A101400000000000000 "USB/CCDM_CIN: An invalid asynchronous data packet has been
specified"
CC1A 1015_E 4 99 CC1A101500000000000000 "USB/CCDM_CIN: There are not enough system resources to
complete the operation"
CC1A 1016_E 4 99 CC1A101600000000000000 "USB/CCDM_CIN: Specified interface was not found in the current
configuration"
CC1A 1017_E 4 99 CC1A101700000000000000 "USB/CCDM_CIN: Operation cannot be executed while the USB
device is in the current state"
CC1A 1018_E 4 99 CC1A101800000000000000 "USB/CCDM_CIN: Invalid parameter has been specified with an
IOCTL operation"
CC1A 1019_E 4 99 CC1A101900000000000000 "USB/CCDM_CIN: Evaluation interval of the USBIO DEMO
version has expired"
CC1A 101A_E 4 99 CC1A101A00000000000000 "USB/CCDM_CIN: Invalid power state has been specified"
CC1A 101B_E 4 99 CC1A101B00000000000000 "USB/CCDM_CIN: Device has entered a power down state"

U25604-J-Z745-1-7600 May 2011 43

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
CC1A 101C_E 4 99 CC1A101C00000000000000 "USB/CCDM_CIN: API version reported by the USBIO driver does
not match"
CC1A 101D_E 4 99 CC1A101D00000000000000 "USB/CCDM_CIN: Set configuration operation has failed, error is
reported by the USBIO"
CC1A 1080_E 4 99 CC1A108000000000000000 "USB/CCDM_CIN: Operation has failed due to a restriction of the
USBIO LIGHT version"
CC1A 1081_E 4 99 CC1A108100000000000000 "USB/CCDM_CIN: Operation has failed due to a restriction of the
USBIO LIGHT version"
CC1A 1082_E 4 99 CC1A108200000000000000 "USB/CCDM_CIN: Operation has failed due to a restriction of the
USBIO LIGHT version"
CC1A 1083_E 4 99 CC1A108300000000000000 "USB/CCDM_CIN: Operation has failed due to a restriction of the
USBIO LIGHT version"
CC1A 1084_E 4 99 CC1A108400000000000000 "USB/CCDM_CIN: Operation has failed due to a restriction of the
USBIO LIGHT version"
CC1A 1085_E 4 99 CC1A108500000000000000 "USB/CCDM_CIN: Operation has failed due to a restriction of the
USBIO LIGHT version"
CC1A 1086_E 4 99 CC1A108600000000000000 "USB/CCDM_CIN: The operation has failed due to a restriction of
the USBIO LIGHT version"
CC1A 1087_E 4 99 CC1A108700000000000000 "USB/CCDM_CIN: Operation has failed due to a restriction of the
USBIO LIGHT version"
CC1A 1100_E 4 99 CC1A110000000000000000 "USB/CCDM_CIN: The specified device object does not exist"
CC1A 1102_E 4 99 CC1A110200000000000000 "USB/CCDM_CIN: Device object was opened, there is no valid
handle to execute the operation"
CC1A 1104_E 4 99 CC1A110400000000000000 "USB/CCDM_CIN: Enumeration of the specified devices has
failed"
CC1A 1105_E 4 99 CC1A110500000000000000 "USB/CCDM_CIN: Invalid parameter has been passed to a
function"
CC1A 1106_E 4 99 CC1A110600000000000000 "USB/CCDM_CIN: Library setupapi.dll could not be loaded"
CC1A 1420_E 2 99 CC1A142000000000000000 "USB/CCDM_CIN: Invalid handle in parameter block"
CC1A 1421_E 2 99 CC1A142100000000000000 "USB/CCDM_CIN: Illegal device number was transferred when
the handle was created"
CC1A 1424_E 2 99 CC1A142400000000000000 "USB/CCDM_CIN: Device handler currently locked by another
user"
CC1A 2000_E 4 99 CC1A200000000000000000 "USB/CCDM_CIN: Set configuration request has failed"
CC1A 3000_E 4 99 CC1A300000000000000000 "USB/CCDM_CIN: Buffer is too small, error is reported by the USB
bus driver USBD"
CC1A 4000_E 4 99 CC1A400000000000000000 "USB/CCDM_CIN: Interface was not found, error is reported by
the USB bus driver USBD"
CC1A 5000_E 4 99 CC1A500000000000000000 "USB/CCDM_CIN: Invalid pipe flags have been specified"
CC1A 6000_E 4 99 CC1A600000000000000000 "USB/CCDM_CIN: Operation has been timed out, error is reported
by the USB bus driver"
CC1A 7000_E 4 99 CC1A700000000000000000 "USB/CCDM_CIN: USB device is gone, error is reported by the
USB bus driver USBD"
DD1A DEFA_W 2 99 DD1ADEFA "USB/CCDM_CHQ: DEFAULT_WARNING"
DD1A DEFA_E 2 99 DD1ADEFA "USB/CCDM_CHQ: DEFAULT_ERROR"
DD1A 1420_E 2 99 DD1A1420 "USB/CCDM_CHQ: Invalid handle in parameter block"
DD1A 1421_E 2 99 DD1A1421 "USB/CCDM_CHQ: Illegal device number was transferred when
the handle was created"
DD1A 1424_E 2 99 DD1A1424 "USB/CCDM_CHQ: Device handler currently locked by another
user"
DD1A 8000_E 2 99 DD1A8000 "USB/CCDM_CHQ: Unexpected descriptor was reported from
USB device"
DD1A 8001_E 2 99 DD1A8001 "USB/CCDM_CHQ: Device not found"
DD1A 8002_E 2 99 DD1A8002 "USB/CCDM_CHQ: Not enough memory available"
DD1A 8003_E 2 99 DD1A8003 "USB/CCDM_CHQ: It was no endpoint found in the descriptor"
DD1A 8004_E 2 99 DD1A8004 "USB/CCDM_CHQ: The creation of the list of USB devices failed"
DD1A FE09_E 2 99 DD1AFE09 "USB/CCDM_CHQ: USB read command could not be executed in
the specified monitoring time"
DD1A FE0A_E 2 99 DD1AFE0A "USB/CCDM_CHQ: USB READ command is cancelled by the
user"
DD1A FE89_E 2 99 DD1AFE89 "USB/CCDM_CHQ: The pointer pData is illegal"
DD1A FE9C_E 2 99 DD1AFE9C "USB/CCDM_CHQ: The length in DataSize is 0 (zero)"
DD1A 0001_E 2 99 DD1A0001 "USB/CCDM_CHQ: CRC error has been detected"
DD1A 0002_E 2 99 DD1A0002 "USB/CCDM_CHQ: Bit stuffing error has been detected"
DD1A 0003_E 2 99 DD1A0003 "USB/CCDM_CHQ: DATA toggle mismatch has been detected"
DD1A 0004_E 2 99 DD1A0004 "USB/CCDM_CHQ: STALLPID has been detected, error is
reported by the USB host controller"

44 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
DD1A 0005_E 2 99 DD1A0005 "USB/CCDM_CHQ: USB device is not responding, error is
reported by the USB host"
DD1A 0006_E 2 99 DD1A0006 "USB/CCDM_CHQ: PID check has failed, error is reported by the
USB host controller"
DD1A 0007_E 2 99 DD1A0007 "USB/CCDM_CHQ: Unexpected PID detected, error is reported
by the USB host"
DD1A 0008_E 2 99 DD1A0008 "USB/CCDM_CHQ: Data overrun error detected, error is reported
by the USB host"
DD1A 0009_E 2 99 DD1A0009 "USB/CCDM_CHQ: Data underrun error detected, error is
reported by the USB host"
DD1A 000A_E 2 99 DD1A000A "USB/CCDM_CHQ: Error code is reserved by the USB host
controller driver"
DD1A 000B_E 2 99 DD1A000B "USB/CCDM_CHQ: Error code is reserved by the USB host
controller driver"
DD1A 000C_E 2 99 DD1A000C "USB/CCDM_CHQ: Buffer overrun has been detected, error is
reported by the USB host"
DD1A 000D_E 2 99 DD1A000D "USB/CCDM_CHQ: Buffer underrun has been detected, error is
reported by the USB host"
DD1A 000F_E 2 99 DD1A000F "USB/CCDM_CHQ: Buffer was not accessed, error is reported by
the USB host"
DD1A 0010_E 2 99 DD1A0010 "USB/CCDM_CHQ: FIFO error has been detected, PCI bus
latency was too long"
DD1A 0011_E 2 99 DD1A0011 "USB/CCDM_CHQ: XACT error has been detected, error is
reported by the USB host"
DD1A 0012_E 2 99 DD1A0012 "USB/CCDM_CHQ: Device is babbling, data transfer phase
exceeds the USB frame length"
DD1A 0013_E 2 99 DD1A0013 "USB/CCDM_CHQ: Data buffer error has been detected, error is
reported by the USB host"
DD1A 0030_E 2 99 DD1A0030 "USB/CCDM_CHQ: Endpoint has been halted by the USB bus
driver USBD"
DD1A 0100_E 2 99 DD1A0100 "USB/CCDM_CHQ: Memory allocation attempt has failed, error is
reported by the USB bus"
DD1A 0200_E 2 99 DD1A0200 "USB/CCDM_CHQ: Invalid URB function code has been passed,
error is reported by the USB"
DD1A 0300_E 2 99 DD1A0300 "USB/CCDM_CHQ: Invalid parameter has been passed, error is
reported by the USB bus"
DD1A 0400_E 2 99 DD1A0400 "USB/CCDM_CHQ: There are data transfer requests pending for
the device"
DD1A 0500_E 2 99 DD1A0500 "USB/CCDM_CHQ: Request has failed, error is reported by the
USB bus driver USBD"
DD1A 0600_E 2 99 DD1A0600 "USB/CCDM_CHQ: Invalid pipe handle has been passed, error is
reported by the USB bus"
DD1A 0700_E 2 99 DD1A0700 "USB/CCDM_CHQ: There is not enough bandwidth available,
error is reported by the USB bus"
DD1A 0800_E 2 99 DD1A0800 "USB/CCDM_CHQ: Internal host controller error has been
detected"
DD1A 0900_E 2 99 DD1A0900 "USB/CCDM_CHQ: Short transfer has been detected, error is
reported by the USB bus"
DD1A 0A00_E 2 99 DD1A0A00 "USB/CCDM_CHQ: Bad start frame has been specified, error is
reported by the USB bus"
DD1A 0B00_E 2 99 DD1A0B00 "USB/CCDM_CHQ: Asynchronous request has failed, error is
reported by the USB bus driver"
DD1A 0C00_E 2 99 DD1A0C00 "USB/CCDM_CHQ: USB frame control is currently owned, error is
reported by the USB bus"
DD1A 0D00_E 2 99 DD1A0D00 "USB/CCDM_CHQ: USB frame control is currently not owned,
error is reported by the USB"
DD1A 0E00_E 2 99 DD1A0E00 "USB/CCDM_CHQ: Operation is not supported, error is reported
by the USB bus driver"
DD1A 0F00_E 2 99 DD1A0F00 "USB/CCDM_CHQ: Invalid configuration descriptor was reported
by the device"
DD1A 1000_E 2 99 DD1A1000 "USB/CCDM_CHQ: Operation has failed, error is reported by the
USBIO driver"
DD1A 1001_E 2 99 DD1A1001 "USB/CCDM_CHQ: Invalid input buffer has been passed to an
IOCTL operation"
DD1A 1002_E 2 99 DD1A1002 "USB/CCDM_CHQ: Invalid output buffer has been passed to an
IOCTL operation"
DD1A 1003_E 2 99 DD1A1003 "USB/CCDM_CHQ: There is not enough system memory
available to complete the operation"

U25604-J-Z745-1-7600 May 2011 45

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
DD1A 1004_E 2 99 DD1A1004 "USB/CCDM_CHQ: There are read or write requests pending,
error is reported by the USBIO"
DD1A 1005_E 2 99 DD1A1005 "USB/CCDM_CHQ: USB device is already configured, error is
reported by the USBIO"
DD1A 1006_E 2 99 DD1A1006 "USB/CCDM_CHQ: The USB device is not configured, error is
reported by the USBIO driver"
DD1A 1007_E 2 99 DD1A1007 "USB/CCDM_CHQ: There are open pipes, error is reported by the
USBIO driver"
DD1A 1008_E 2 99 DD1A1008 "USB/CCDM_CHQ: Either the handle is already bound to a pipe"
DD1A 1009_E 2 99 DD1A1009 "USB/CCDM_CHQ: Handle is not bound to a pipe, error is
reported by the USBIO driver"
DD1A 100A_E 2 99 DD1A100A "USB/CCDM_CHQ: USB device has been removed from the
system"
DD1A 100B_E 2 99 DD1A100B "USB/CCDM_CHQ: Specified control code is not supported"
DD1A 100C_E 2 99 DD1A100C "USB/CCDM_CHQ: Operation has been timed out, error is
reported by the USBIO driver"
DD1A 100D_E 2 99 DD1A100D "USB/CCDM_CHQ: Invalid recipient has been specified"
DD1A 100E_E 2 99 DD1A100E "USB/CCDM_CHQ: Either an invalid request type has been
specified"
DD1A 100F_E 2 99 DD1A100F "USB/CCDM_CHQ: Invalid IOCTL code has been specified, error
is reported by the USBIO"
DD1A 1010_E 2 99 DD1A1010 "USB/CCDM_CHQ: Direction of the data transfer request is not
supported by that pipe"
DD1A 1011_E 2 99 DD1A1011 "USB/CCDM_CHQ: Number of asynchronous data packets
specified in an asynchronous read"
DD1A 1012_E 2 99 DD1A1012 "USB/CCDM_CHQ: Memory resources are exhausted. This error
is reported by the USBIO driver"
DD1A 1013_E 2 99 DD1A1013 "USB/CCDM_CHQ: The specified pipe was not found in the
current configuration"
DD1A 1014_E 2 99 DD1A1014 "USB/CCDM_CHQ: An invalid asynchronous data packet has
been specified"
DD1A 1015_E 2 99 DD1A1015 "USB/CCDM_CHQ: There are not enough system resources to
complete the operation"
DD1A 1016_E 2 99 DD1A1016 "USB/CCDM_CHQ: Specified interface was not found in the
current configuration"
DD1A 1017_E 2 99 DD1A1017 "USB/CCDM_CHQ: Operation cannot be executed while the USB
device is in the current state"
DD1A 1018_E 2 99 DD1A1018 "USB/CCDM_CHQ: Invalid parameter has been specified with an
IOCTL operation"
DD1A 1019_E 2 99 DD1A1019 "USB/CCDM_CHQ: Evaluation interval of the USBIO DEMO
version has expired"
DD1A 101A_E 2 99 DD1A101A "USB/CCDM_CHQ: Invalid power state has been specified"
DD1A 101B_E 2 99 DD1A101B "USB/CCDM_CHQ: Device has entered a power down state"
DD1A 101C_E 2 99 DD1A101C "USB/CCDM_CHQ: API version reported by the USBIO driver
does not match"
DD1A 101D_E 2 99 DD1A101D "USB/CCDM_CHQ: Set configuration operation has failed, error is
reported by the USBIO"
DD1A 1080_E 2 99 DD1A1080 "USB/CCDM_CHQ: Operation has failed due to a restriction of the
USBIO LIGHT version"
DD1A 1081_E 2 99 DD1A1081 "USB/CCDM_CHQ: Operation has failed due to a restriction of the
USBIO LIGHT version"
DD1A 1082_E 2 99 DD1A1082 "USB/CCDM_CHQ: Operation has failed due to a restriction of the
USBIO LIGHT version"
DD1A 1083_E 2 99 DD1A1083 "USB/CCDM_CHQ: Operation has failed due to a restriction of the
USBIO LIGHT version"
DD1A 1084_E 2 99 DD1A1084 "USB/CCDM_CHQ: Operation has failed due to a restriction of the
USBIO LIGHT version"
DD1A 1085_E 2 99 DD1A1085 "USB/CCDM_CHQ: Operation has failed due to a restriction of the
USBIO LIGHT version"
DD1A 1086_E 2 99 DD1A1086 "USB/CCDM_CHQ: The operation has failed due to a restriction of
the USBIO LIGHT version"
DD1A 1087_E 2 99 DD1A1087 "USB/CCDM_CHQ: Operation has failed due to a restriction of the
USBIO LIGHT version"
DD1A 1100_E 2 99 DD1A1100 "USB/CCDM_CHQ: The specified device object does not exist"
DD1A 1102_E 2 99 DD1A1102 "USB/CCDM_CHQ: Device object was opened, there is no valid
handle to execute the operation"
DD1A 1104_E 2 99 DD1A1104 "USB/CCDM_CHQ: Enumeration of the specified devices has
failed"

46 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
DD1A 1105_E 2 99 DD1A1105 "USB/CCDM_CHQ: Invalid parameter has been passed to a
function"
DD1A 1106_E 2 99 DD1A1106 "USB/CCDM_CHQ: Library setupapi.dll could not be loaded"
DD1A 2000_E 2 99 DD1A2000 "USB/CCDM_CHQ: Set configuration request has failed"
DD1A 3000_E 2 99 DD1A3000 "USB/CCDM_CHQ: Buffer is too small, error is reported by the
USB bus driver USBD"
DD1A 4000_E 2 99 DD1A4000 "USB/CCDM_CHQ: Interface was not found, error is reported by
the USB bus driver USBD"
DD1A 5000_E 2 99 DD1A5000 "USB/CCDM_CHQ: Invalid pipe flags have been specified"
DD1A 6000_E 2 99 DD1A6000 "USB/CCDM_CHQ: Operation has been timed out, error is
reported by the USB bus driver"
DD1A 7000_E 2 99 DD1A7000 "USB/CCDM_CHQ: USB device is gone, error is reported by the
USB bus driver USBD"
EE1A FE06_E 4 99 EE1AFE06000000000000 "COMM/CCDM_CIN: COMM reports invalid spec. for the protocol"
EE1A FE07_E 4 99 EE1AFE07000000000000 "COMM/CCDM_CIN: A COMM WRITE command is cancelled by
the user"
EE1A FE08_E 4 99 EE1AFE08000000000000 "COMM/CCDM_CIN: COMM WRITE command could not be
executed"
EE1A FE09_E 4 99 EE1AFE09000000000000 "COMM/CCDM_CIN: A COMM READ command could not be
executed"
EE1A FE0A_E 4 99 EE1AFE0A000000000000 "COMM/CCDM_CIN: A COMM READ command is cancelled by
the user"
EE1A FE0B_E 4 99 EE1AFE0B000000000000 "COMM/CCDM_CIN: The COMM driver reports a parity error"
EE1A FE0C_E 4 99 EE1AFE0C000000000000 "COMM/CCDM_CIN: The COMM driver reports a general error"
EE1A FE0F_E 4 99 EE1AFE0F000000000000 "COMM/CCDM_CIN: Peripheral device did not answer"
EE1A FE13_E 4 99 EE1AFE13000000000000 "COMM/CCDM_CIN: The channel was not initialized"
EE1A FE16_E 4 99 EE1AFE16000000000000 "COMM/CCDM_CIN: The COMM driver reports a break"
EE1A FE7A_E 4 99 EE1AFE7A000000000000 "COMM/CCDM_CIN: The COMM driver reports a overrun error"
EE1A FE7B_E 4 99 EE1AFE7B000000000000 "COMM/CCDM_CIN: The COMM driver reports a frameing error"
EE1A FE85_E 4 99 EE1AFE85000000000000 "COMM/CCDM_CIN: The COMM driver could not be opened"
EE1A FE89_E 4 99 EE1AFE89000000000000 "COMM/CCDM_CIN: The pointer pTxData is illegal"
EE1A FE8B_E 4 99 EE1AFE8B000000000000 "COMM/CCDM_CIN: Called function is invalid for CscCom-
mOpen"
EE1A FE8C_E 4 99 EE1AFE8C000000000000 "COMM/CCDM_CIN: The peripheral device does not return an
STX"
EE1A FE8D_E 4 99 EE1AFE8D000000000000 "COMM/CCDM_CIN: The peripheral device does not return an
ETX"
EE1A FE8E_E 4 99 EE1AFE8E000000000000 "COMM/CCDM_CIN: Block length does not agree with the trans-
mitted block length"
EE1A FE8F_E 4 99 EE1AFE8F000000000000 "COMM/CCDM_CIN: The block ID is invalid"
EE1A FE90_E 4 99 EE1AFE90000000000000 "COMM/CCDM_CIN: Received DID does not agree with the trans-
mitted DID"
EE1A FE91_E 4 99 EE1AFE91000000000000 "COMM/CCDM_CIN: Wrong command specification"
EE1A FE92_E 4 99 EE1AFE92000000000000 "COMM/CCDM_CIN: The received acknowledge type is invalid"
EE1A FE93_E 4 99 EE1AFE93000000000000 "COMM/CCDM_CIN: Max no of repeat transmissions reached"
EE1A FE94_E 4 99 EE1AFE94000000000000 "COMM/CCDM_CIN: Max no of receive repeats has been
reached"
EE1A FE95_E 4 99 EE1AFE95000000000000 "COMM/CCDM_CIN: Monitoring time during transmission has
been exceeded"
EE1A FE96_E 4 99 EE1AFE96000000000000 "COMM/CCDM_CIN: Monitoring time during receive has been
exceeded"
EE1A FE97_E 4 99 EE1AFE97000000000000 "COMM/CCDM_CIN: Busy time from phys. device excceeded"
EE1A FE98_E 4 99 EE1AFE98000000000000 "COMM/CCDM_CIN: The protocol was cancelled"
EE1A FE9C_E 4 99 EE1AFE9C000000000000 "COMM/CCDM_CIN: The length in TxData is 0"
EE1A FE9D_E 4 99 EE1AFE9D000000000000 "COMM/CCDM_CIN: CSCWISODLL could not be found in the
PATH"
EE1A FE9E_E 4 99 EE1AFE9E000000000000 "COMM/CCDM_CIN: The CSCWISODLL could not be opened"
EE1A FEE0_E 4 99 EE1AFEE0000000000000 "COMM/CCDM_CIN: The peripheral device did not answer"
EE1A FEE1_E 4 99 EE1AFEE1000000000000 "COMM/CCDM_CIN: Peripheral device did not answer as
expected"
EE1A FEE2_E 4 99 EE1AFEE2000000000000 "COMM/CCDM_CIN: The peripheral device is busy"
EE1A FEE3_E 4 99 EE1AFEE3000000000000 "COMM/CCDM_CIN: Peripheral device did not answer as
expected"
EE1A FEE4_E 4 99 EE1AFEE4000000000000 "COMM/CCDM_CIN: Max no. of repeat transmissions reached"
EE1A FEE5_E 4 99 EE1AFEE5000000000000 "COMM/CCDM_CIN: Device asked for termination"
EE1A FEE6_E 4 99 EE1AFEE6000000000000 "COMM/CCDM_CIN: Peripheral device did not answer"

U25604-J-Z745-1-7600 May 2011 47

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
EE1A FEE7_E 4 99 EE1AFEE7000000000000 "COMM/CCDM_CIN: Response of device not completely
received"
EE1A FEE8_E 4 99 EE1AFEE8000000000000 "COMM/CCDM_CIN: The header of the response is invalid"
EE1A FEE9_E 4 99 EE1AFEE9000000000000 "COMM/CCDM_CIN: DID does not agree with the transmitted
DID"
EE1A FEEA_E 4 99 EE1AFEEA000000000000 "COMM/CCDM_CIN: DID does not agree with the transmitted
device ID"
EE1A FEEB_E 4 99 EE1AFEEB000000000000 "COMM/CCDM_CIN: Command spec. does not agree with the
transmitted command spec."
EE1A FEEC_E 4 99 EE1AFEEC000000000000 "COMM/CCDM_CIN: The response of the device has not been
completely received"
EE1A FEED_E 4 99 EE1AFEED000000000000 "COMM/CCDM_CIN: A cancel command has been called"
EE1A FEEF_E 4 99 EE1AFEEF000000000000 "COMM/CCDM_CIN: A cancel command has been called"
EE1A FEF0_E 2 99 EE1AFEF000000000000000 "COMM/CCDM_CIN: The command could not be executed
because another command was still active"
EE1A FEF1_E 2 99 EE1AFEF100000000000000 "COMM/CCDM_CIN: The command was aborted by the user. No
entry will be made in the error log"
EE1A FEF2_E 2 99 EE1AFEF200000000000000 "COMM/CCDM_CIN: The command could not be executed
because a cancel command was still active"
EE1A FEF3_E 2 99 EE1AFEF300000000000000 "COMM/CCDM_CIN: A cancel command could not be executed"
EE1A FEF4_E 2 99 EE1AFEF400000000000000 "COMM/CCDM_CIN: Command could not be cancelled because
internal monitoring time exceeded"
EE1A FEF5_E 2 99 EE1AFEF500000000000000 "COMM/CCDM_CIN: Internal error within the CSCWISO.DLL"
FF1A FE06_E 4 99 FF1AFE06000000000000 "COMM/CCDM_CHQ: COMM reports invalid spec. for the
protocol"
FF1A FE07_E 4 99 FF1AFE07000000000000 "COMM/CCDM_CHQ: A COMM WRITE command is cancelled by
the user"
FF1A FE08_E 4 99 FF1AFE08000000000000 "COMM/CCDM_CHQ: COMM WRITE command could not be
executed"
FF1A FE09_E 4 99 FF1AFE09000000000000 "COMM/CCDM_CHQ: A COMM READ command could not be
executed"
FF1A FE0A_E 4 99 FF1AFE0A000000000000 "COMM/CCDM_CHQ: A COMM READ command is cancelled by
the user"
FF1A FE0B_E 4 99 FF1AFE0B000000000000 "COMM/CCDM_CHQ: The COMM driver reports a parity error"
FF1A FE0C_E 4 99 FF1AFE0C000000000000 "COMM/CCDM_CHQ: The COMM driver reports a general error"
FF1A FE0F_E 4 99 FF1AFE0F000000000000 "COMM/CCDM_CHQ: Peripheral device did not answer"
FF1A FE13_E 4 99 FF1AFE13000000000000 "COMM/CCDM_CHQ: The channel was not initialized"
FF1A FE16_E 4 99 FF1AFE16000000000000 "COMM/CCDM_CHQ: The COMM driver reports a break"
FF1A FE7A_E 4 99 FF1AFE7A000000000000 "COMM/CCDM_CHQ: The COMM driver reports a overrun error"
FF1A FE7B_E 4 99 FF1AFE7B000000000000 "COMM/CCDM_CHQ: The COMM driver reports a frameing error"
FF1A FE85_E 4 99 FF1AFE85000000000000 "COMM/CCDM_CHQ: The COMM driver could not be opened"
FF1A FE89_E 4 99 FF1AFE89000000000000 "COMM/CCDM_CHQ: The pointer pTxData is illegal"
FF1A FE8B_E 4 99 FF1AFE8B000000000000 "COMM/CCDM_CHQ: Called function is invalid for CscCom-
mOpen"
FF1A FE8C_E 4 99 FF1AFE8C000000000000 "COMM/CCDM_CHQ: The peripheral device does not return an
STX"
FF1A FE8D_E 4 99 FF1AFE8D000000000000 "COMM/CCDM_CHQ: The peripheral device does not return an
ETX"
FF1A FE8E_E 4 99 FF1AFE8E000000000000 "COMM/CCDM_CHQ: Block length does not agree with the trans-
mitted block length"
FF1A FE8F_E 4 99 FF1AFE8F000000000000 "COMM/CCDM_CHQ: The block ID is invalid"
FF1A FE90_E 4 99 FF1AFE90000000000000 "COMM/CCDM_CHQ: Received DID does not agree with the
transmitted DID"
FF1A FE91_E 4 99 FF1AFE91000000000000 "COMM/CCDM_CHQ: Wrong command specification"
FF1A FE92_E 4 99 FF1AFE92000000000000 "COMM/CCDM_CHQ: The received acknowledge type is invalid"
FF1A FE93_E 4 99 FF1AFE93000000000000 "COMM/CCDM_CHQ: Max no of repeat transmissions reached"
FF1A FE94_E 4 99 FF1AFE94000000000000 "COMM/CCDM_CHQ: Max no of receive repeats has been
reached"
FF1A FE95_E 4 99 FF1AFE95000000000000 "COMM/CCDM_CHQ: Monitoring time during transmission has
been exceeded"
FF1A FE96_E 4 99 FF1AFE96000000000000 "COMM/CCDM_CHQ: Monitoring time during receive has been
exceeded"
FF1A FE97_E 4 99 FF1AFE97000000000000 "COMM/CCDM_CHQ: Busy time from phys. device excceeded"
FF1A FE98_E 4 99 FF1AFE98000000000000 "COMM/CCDM_CHQ: The protocol was cancelled"
FF1A FE9C_E 4 99 FF1AFE9C000000000000 "COMM/CCDM_CHQ: The length in TxData is 0"

48 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
FF1A FE9D_E 4 99 FF1AFE9D000000000000 "COMM/CCDM_CHQ: CSCWISODLL could not be found in the
PATH"
FF1A FE9E_E 4 99 FF1AFE9E000000000000 "COMM/CCDM_CHQ: The CSCWISODLL could not be opened"
FF1A FEE0_E 4 99 FF1AFEE0000000000000 "COMM/CCDM_CHQ: The peripheral device did not answer"
FF1A FEE1_E 4 99 FF1AFEE1000000000000 "COMM/CCDM_CHQ: Peripheral device did not answer as
expected"
FF1A FEE2_E 4 99 FF1AFEE2000000000000 "COMM/CCDM_CHQ: The peripheral device is busy"
FF1A FEE3_E 4 99 FF1AFEE3000000000000 "COMM/CCDM_CHQ: Peripheral device did not answer as
expected"
FF1A FEE4_E 4 99 FF1AFEE4000000000000 "COMM/CCDM_CHQ: Max no. of repeat transmissions reached"
FF1A FEE5_E 4 99 FF1AFEE5000000000000 "COMM/CCDM_CHQ: Device asked for termination"
FF1A FEE6_E 4 99 FF1AFEE6000000000000 "COMM/CCDM_CHQ: Peripheral device did not answer"
FF1A FEE7_E 4 99 FF1AFEE7000000000000 "COMM/CCDM_CHQ: Response of device not completely
received"
FF1A FEE8_E 4 99 FF1AFEE8000000000000 "COMM/CCDM_CHQ: The header of the response is invalid"
FF1A FEE9_E 4 99 FF1AFEE9000000000000 "COMM/CCDM_CHQ: DID does not agree with the transmitted
DID"
FF1A FEEA_E 4 99 FF1AFEEA000000000000 "COMM/CCDM_CHQ: DID does not agree with the transmitted
device ID"
FF1A FEEB_E 4 99 FF1AFEEB000000000000 "COMM/CCDM_CHQ: Command spec. does not agree with the
transmitted command spec."
FF1A FEEC_E 4 99 FF1AFEEC000000000000 "COMM/CCDM_CHQ: The response of the device has not been
completely received"
FF1A FEED_E 4 99 FF1AFEED000000000000 "COMM/CCDM_CHQ: A cancel command has been called"
FF1A FEEF_E 4 99 FF1AFEEF000000000000 "COMM/CCDM_CHQ: A cancel command has been called"
FF1A FEF0_E 2 99 FF1AFEF000000000000000 "COMM/CCDM_CHQ: The command could not be executed
because another command was still active"
FF1A FEF1_E 2 99 FF1AFEF100000000000000 "COMM/CCDM_CHQ: The command was aborted by the user. No
entry will be made in the error log"
FF1A FEF2_E 2 99 FF1AFEF200000000000000 "COMM/CCDM_CHQ: The command could not be executed
because a cancel command was still active"
FF1A FEF3_E 2 99 FF1AFEF300000000000000 "COMM/CCDM_CHQ: A cancel command could not be executed"
FF1A FEF4_E 2 99 FF1AFEF400000000000000 "COMM/CCDM_CHQ: Command could not be cancelled because
internal monitoring time exceeded"
FF1A FEF5_E 2 99 FF1AFEF500000000000000 "COMM/CCDM_CHQ: Internal error within the CSCWISO.DLL"

U25604-J-Z745-1-7600 May 2011 49

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Cash Cheque Deposit Module (Classes: 001A_CHQ)

The following table lists the MDS Status codes assigned to the device classes
Cash Cheque Deposit Module (CCDM) assigned to device class ChequeInFW.

Refer to section ”Error Class Mapping” on page 5.

Table 7: Cash Cheque Deposit Module (Class: 001A_CHQ)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
001A_CHQ DEFA_E 2 99 001ADEFA00000000000000 "CCDM_CHQ: DEFAULT ERROR"
001A_CHQ DEFA_W 2 99 001ADEFA00000000000000 "CCDM_CHQ: DEFAULT WARNING"
001A_CHQ 0001_E 2 99 001A000100000000000000 "CCDM_CHQ: No connection to dispenser module"
001A_CHQ 0002_E 2 99 001A000200000000000000 "CCDM_CHQ: No connection to amplifier logic"
001A_CHQ 0003_E 2 99 001A000300000000000000 "CCDM_CHQ: No connection to stacker logic"
001A_CHQ 0014_E 2 99 001A001400000000000000 "CCDM_CHQ: General firmware error"
001A_CHQ 0015_E 2 99 001A001500000000000000 "CCDM_CHQ: Battery on controller board empty"
001A_CHQ 0016_E 2 99 001A001600000000000000 "CCDM_CHQ: Safety switch active"
001A_CHQ 0017_E 2 99 001A001700000000000000 "CCDM_CHQ: System interface does not fetch the data from
the CCDM fast enough"
001A_CHQ 0018_E 2 99 001A001800000000000000 "CCDM_CHQ: Invalid or missing configuration"
001A_CHQ 0019_E 2 99 001A001900000000000000 "CCDM_CHQ: The application overloads the CCDM hardware
(too many reset commands per time)"
001A_CHQ 001E_E 2 99 001A001E00000000000000 "CCDM_CHQ: Error magnetic character reader"
001A_CHQ 0028_E 2 99 001A002800000000000000 "CCDM_CHQ: Error cheque/cash reader"
001A_CHQ 0029_E 2 99 001A002900000000000000 "CCDM_CHQ: Firmware error cheque/cash reader"
001A_CHQ 002A_E 2 99 001A002A00000000000000 "CCDM_CHQ: Communication problem cheque/cash reader"
001A_CHQ 002B_E 2 99 001A002B00000000000000 "CCDM_CHQ: Data error cheque/cash reader"
001A_CHQ 002C_E 2 99 001A002C00000000000000 "CCDM_CHQ: Note table configuration not Ok"
001A_CHQ 002D_E 2 99 001A002D00000000000000 "CCDM_CHQ: External light in cheque/cash reader"
001A_CHQ 002F_E 2 99 001A002F00000000000000 "CCDM_CHQ: Communication problems (time out)"
001A_CHQ 0030_E 2 99 001A003000000000000000 "CCDM_CHQ: Communication problems"
001A_CHQ 0031_E 2 99 001A003100000000000000 "CCDM_CHQ: Cheque/cash reader firmware and CCDM
firmware are incompatible"
001A_CHQ 0032_E 2 99 001A003200000000000000 "CCDM_CHQ: BEB module is defective"
001A_CHQ 0033_E 2 99 001A003300000000000000 "CCDM_CHQ: Communication problems with cheque/cash
reader"
001A_CHQ 0034_E 2 99 001A003400000000000000 "CCDM_CHQ: BEB note table configuration not Ok"
001A_CHQ 0035_E 2 99 001A003500000000000000 "CCDM_CHQ: BEB module is defective"
001A_CHQ 0036_E 2 99 001A003600000000000000 "CCDM_CHQ: Communication problem from BEB to RS232
interface"
001A_CHQ 0037_E 2 99 001A003700000000000000 "CCDM_CHQ: BEB firmware and CCDM firmware are incom-
patible"
001A_CHQ 0038_E 2 99 001A003800000000000000 "CCDM_CHQ: Communication problems RS232 interface <->
BEB module"
001A_CHQ 003D_E 2 99 001A003D00000000000000 "CCDM_CHQ: Error photosensor VLS"
001A_CHQ 003E_E 2 99 001A003E00000000000000 "CCDM_CHQ: Error photosensor VLS"
001A_CHQ 003F_E 2 99 001A003F00000000000000 "CCDM_CHQ: Error photosensor VLS"
001A_CHQ 0040_E 2 99 001A004000000000000000 "CCDM_CHQ: Error photosensor VLS"
001A_CHQ 0041_E 2 99 001A004100000000000000 "CCDM_CHQ: Error photosensor VLS1"
001A_CHQ 0042_E 2 99 001A004200000000000000 "CCDM_CHQ: Error photosensor ALS"
001A_CHQ 0043_E 2 99 001A004300000000000000 "CCDM_CHQ: Error photosensor ALS"
001A_CHQ 0044_E 2 99 001A004400000000000000 "CCDM_CHQ: Error photosensor ALS"
001A_CHQ 0045_E 2 99 001A004500000000000000 "CCDM_CHQ: Error photosensor ALS"
001A_CHQ 0046_E 2 99 001A004600000000000000 "CCDM_CHQ: Error photosensor SLS"
001A_CHQ 0047_E 2 99 001A004700000000000000 "CCDM_CHQ: Error photosensor SLS"
001A_CHQ 0048_E 2 99 001A004800000000000000 "CCDM_CHQ: Error photosensor ELS"

50 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
001A_CHQ 0049_E 2 99 001A004900000000000000 "CCDM_CHQ: Error photosensor RLS"
001A_CHQ 004A_E 2 99 001A004A00000000000000 "CCDM_CHQ: Error photosensor RLS"
001A_CHQ 004B_E 2 99 001A004B00000000000000 "CCDM_CHQ: Error photosensor VLS1"
001A_CHQ 004C_E 2 99 001A004C00000000000000 "CCDM_CHQ: Error photosensor ELS"
001A_CHQ 004D_E 2 99 001A004D00000000000000 "CCDM_CHQ: Error photosensor VLS10"
001A_CHQ 0050_E 2 99 001A005000000000000000 "CCDM_CHQ: Error photosensor KLS"
001A_CHQ 0051_E 2 99 001A005100000000000000 "CCDM_CHQ: Error photosensor KLS"
001A_CHQ 0052_E 2 99 001A005200000000000000 "CCDM_CHQ: Error photosensor KLS"
001A_CHQ 0053_E 2 99 001A005300000000000000 "CCDM_CHQ: Error photosensor KLS1"
001A_CHQ 0054_E 2 99 001A005400000000000000 "CCDM_CHQ: Error photosensor KLS2"
001A_CHQ 0055_E 2 99 001A005500000000000000 "CCDM_CHQ: Error photosensor KLS3"
001A_CHQ 0064_E 2 99 001A006400000000000000 "CCDM_CHQ: Transport error detected before dispensing"
001A_CHQ 0065_E 2 99 001A006500000000000000 "CCDM_CHQ: Paper jam detected during separation process"
001A_CHQ 0066_E 2 99 001A006600000000000000 "CCDM_CHQ: VLS6: media too long (media do not pass
(VLS6)"
001A_CHQ 0067_E 2 99 001A006700000000000000 "CCDM_CHQ: VLS7: medium is expected but no media is
coming"
001A_CHQ 0069_E 2 99 001A006900000000000000 "CCDM_CHQ: VLS7: media do not leave VLS7"
001A_CHQ 006A_E 2 99 001A006A00000000000000 "CCDM_CHQ: VLS6: media do not leave VLS6"
001A_CHQ 006C_E 2 99 001A006C00000000000000 "CCDM_CHQ: Faulty extraction detected during dispensing
process"
001A_CHQ 006E_E 2 99 001A006E00000000000000 "CCDM_CHQ: Clearing error I/O tray. Media jam in the inter-
mediary transport"
001A_CHQ 006F_E 2 99 001A006F00000000000000 "CCDM_CHQ: Clearing error I/O tray. Media jam in the I/O
transport"
001A_CHQ 0070_E 2 99 001A007000000000000000 "CCDM_CHQ: Clearing error I/O tray. Media do not reached
VLS"
001A_CHQ 0071_E 2 99 001A007100000000000000 "CCDM_CHQ: Clearing error I/O tray. Media jam in the
separation area of the dispense"
001A_CHQ 0072_E 2 99 001A007200000000000000 "CCDM_CHQ: Clearing error I/O tray. Media jam in the inter-
mediary transport"
001A_CHQ 0073_E 2 99 001A007300000000000000 "CCDM_CHQ: Clearing error I/O tray. Media jam in the inter-
mediary transport"
001A_CHQ 0074_E 2 99 001A007400000000000000 "CCDM_CHQ: Media jam in reject transport area"
001A_CHQ 0078_E 2 99 001A007800000000000000 "CCDM_CHQ: Initialization error hinged transport 1 and/or 2"
001A_CHQ 0079_E 2 99 001A007900000000000000 "CCDM_CHQ: Position error hingend transport 1. The end
position is not reached"
001A_CHQ 007A_E 2 99 001A007A00000000000000 "CCDM_CHQ: Position error hinged transport 2. The end
position is not reached"
001A_CHQ 0082_E 2 99 001A008200000000000000 "CCDM_CHQ: Initialization error during setting the bundle
width"
001A_CHQ 008C_E 2 99 001A008C00000000000000 "CCDM_CHQ: Error on the cam disk"
001A_CHQ 008D_E 2 99 001A008D00000000000000 "CCDM_CHQ: Error on the cam disk"
001A_CHQ 0090_E 2 99 001A009000000000000000 "CCDM_CHQ: Shutter cannot be opened/closed."
001A_CHQ 0091_E 2 99 001A009100000000000000 "CCDM_CHQ: Error on metal detection module"
001A_CHQ 0096_E 2 99 001A009600000000000000 "CCDM_CHQ: VHS1: hardware error thickness measuring
station"
001A_CHQ 0097_E 2 99 001A009700000000000000 "CCDM_CHQ: VHS1: hardware error thickness measuring
station"
001A_CHQ 0098_E 2 99 001A009800000000000000 "CCDM_CHQ: Error of hall sensors"
001A_CHQ 00AA_E 2 99 001A00AA00000000000000 "CCDM_CHQ: Initialization error of reject transport"
001A_CHQ 00AB_E 2 99 001A00AB00000000000000 "CCDM_CHQ: Media jam in the reject transport area"
001A_CHQ 00B4_E 2 99 001A00B400000000000000 "CCDM_CHQ: Media jam in reject transport area"
001A_CHQ 00B5_E 2 99 001A00B500000000000000 "CCDM_CHQ: Clearing error storage transport. Media did not
passed VLS2"
001A_CHQ 00B6_E 2 99 001A00B600000000000000 "CCDM_CHQ: Media jam found in front of VLS12 during reject
box clearing => I/O box"
001A_CHQ 00B9_E 2 99 001A00B900000000000000 "CCDM_CHQ: Paper jam detected during separation process"
001A_CHQ 00BA_E 2 99 001A00BA00000000000000 "CCDM_CHQ: Paper jam detected during separation process"
001A_CHQ 00BB_E 2 99 001A00BB00000000000000 "CCDM_CHQ: Paper jam detected during separation process"
001A_CHQ 00BC_E 2 99 001A00BC00000000000000 "CCDM_CHQ: Paper jam detected during separation process"
001A_CHQ 00BD_E 2 99 001A00BD00000000000000 "CCDM_CHQ: Paper jam detected during separation process"
001A_CHQ 00C8_E 2 99 001A00C800000000000000 "CCDM_CHQ: Media in front oaf ALS1 or ALS1 defect"
001A_CHQ 00C9_E 2 99 001A00C900000000000000 "CCDM_CHQ: ALS1: medium is expected but no media is
coming"

U25604-J-Z745-1-7600 May 2011 51

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
001A_CHQ 00CA_E 2 99 001A00CA00000000000000 "CCDM_CHQ: ALS1: media too long (media do not pass the
drum)"
001A_CHQ 00CB_E 2 99 001A00CB00000000000000 "CCDM_CHQ: ALS1: media is complete recognized but is too
long"
001A_CHQ 00CC_E 2 99 001A00CC00000000000000 "CCDM_CHQ: ALS1: media jam in the drum"
001A_CHQ 00CD_E 2 99 001A00CD00000000000000 "CCDM_CHQ: ALS1: Media end is not detected during
entering the drum"
001A_CHQ 00CE_E 2 99 001A00CE00000000000000 "CCDM_CHQ: ALS1: Media end do not detected during
leaving the drum"
001A_CHQ 012D_E 2 99 001A012D00000000000000 "CCDM_CHQ: Media jam in sensor transport at the 3-way
deflector"
001A_CHQ 012E_E 2 99 001A012E00000000000000 "CCDM_CHQ: Media jam in sensor transport at the reject
deflector"
001A_CHQ 0136_E 2 99 001A013600000000000000 "CCDM_CHQ: BEB module not mounted or not properly
connected to the backplane"
001A_CHQ 0137_E 2 99 001A013700000000000000 "CCDM_CHQ: SLS3: unexpected media during transport from
the alignment module"
001A_CHQ 0138_E 2 99 001A013800000000000000 "CCDM_CHQ: SLS3: unexpected media during transport from
the escrow module"
001A_CHQ 0139_E 2 99 001A013900000000000000 "CCDM_CHQ: SLS3: media jam in sensor transport"
001A_CHQ 0140_E 2 99 001A014000000000000000 "CCDM_CHQ: SLS1: medium is expected but no media is
coming"
001A_CHQ 0141_E 2 99 001A014100000000000000 "CCDM_CHQ: SLS1: unexpected document during transport
from the alignment module"
001A_CHQ 0142_E 2 99 001A014200000000000000 "CCDM_CHQ: SLS1: unexpected document during transport
from the escrow module"
001A_CHQ 0143_E 2 99 001A014300000000000000 "CCDM_CHQ: Document jam in area -> document deflector -
> escrow/reject module"
001A_CHQ 0144_E 2 99 001A014400000000000000 "CCDM_CHQ: Cheque/cash reader: unexpected media during
transport from the alignment module"
001A_CHQ 014A_E 2 99 001A014A00000000000000 "CCDM_CHQ: Document jam at the escrow module ELS1"
001A_CHQ 014B_E 2 99 001A014B00000000000000 "CCDM_CHQ: Document jam between sensor module and
cassette/reject module"
001A_CHQ 014C_E 2 99 001A014C00000000000000 "CCDM_CHQ: Document jam between sensor transport and
reject transport"
001A_CHQ 014D_E 2 99 001A014D00000000000000 "CCDM_CHQ: Cheque/cash reader: the gap between two
media is too small"
001A_CHQ 0190_E 2 99 001A019000000000000000 "CCDM_CHQ: Escrow tape at ELS2 defective"
001A_CHQ 0191_E 2 99 001A019100000000000000 "CCDM_CHQ: Escrow tape at ELS3 defective"
001A_CHQ 0192_E 2 99 001A019200000000000000 "CCDM_CHQ: Document into escrow not expected"
001A_CHQ 0193_E 2 99 001A019300000000000000 "CCDM_CHQ: Failure in ELS1 area"
001A_CHQ 0194_E 2 99 001A019400000000000000 "CCDM_CHQ: Document missing or escrow empty"
001A_CHQ 0195_E 2 99 001A019500000000000000 "CCDM_CHQ: Gap between two notes too long or jam at
escrow unit"
001A_CHQ 0196_E 2 99 001A019600000000000000 "CCDM_CHQ: Initialisation not finished in the spezified time"
001A_CHQ 0197_E 2 99 001A019700000000000000 "CCDM_CHQ: Document jam at the escrow unit"
001A_CHQ 01F5_E 2 99 001A01F500000000000000 "CCDM_CHQ: Incorrect deflector position"
001A_CHQ 01F6_E 2 99 001A01F600000000000000 "CCDM_CHQ: Jam between sensor module (paper deflectors)
and before RLS1"
001A_CHQ 01F7_E 2 99 001A01F700000000000000 "CCDM_CHQ: Document too short"
001A_CHQ 01F8_E 2 99 001A01F800000000000000 "CCDM_CHQ: Document too long"
001A_CHQ 0258_E 2 99 001A025800000000000000 "CCDM_CHQ: Document jam at the escrow unit"
001A_CHQ 0259_E 2 99 001A025900000000000000 "CCDM_CHQ: RLS1: jam or medium too long"
001A_CHQ 025A_E 2 99 001A025A00000000000000 "CCDM_CHQ: RLS1: medium missing at KLS2 (module
entry)"
001A_CHQ 025B_E 2 99 001A025B00000000000000 "CCDM_CHQ: KLS2: unexpected medium at module entry"
001A_CHQ 025C_E 2 99 001A025C00000000000000 "CCDM_CHQ: KLS2: jam or medium too long"
001A_CHQ 025D_E 2 99 001A025D00000000000000 "CCDM_CHQ: Incorrect position of deflector in cassette
module"
001A_CHQ 025E_E 2 99 001A025E00000000000000 "CCDM_CHQ: KLS2: medium to retract box missing"
001A_CHQ 025F_E 2 99 001A025F00000000000000 "CCDM_CHQ: Retract cassette: jam or medium too long"
001A_CHQ 0260_E 2 99 001A026000000000000000 "CCDM_CHQ: Incorrect position of deflector in cassette
module 1"
001A_CHQ 0261_E 2 99 001A026100000000000000 "CCDM_CHQ: KLS2: medium to box 1 missing"
001A_CHQ 0262_E 2 99 001A026200000000000000 "CCDM_CHQ: Cassette module 1: jam or medium too long"

52 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
001A_CHQ 0263_E 2 99 001A026300000000000000 "CCDM_CHQ: Incorrect position of deflector in cassette
module 2"
001A_CHQ 0264_E 2 99 001A026400000000000000 "CCDM_CHQ: KLS2: medium to box 2 missing"
001A_CHQ 0265_E 2 99 001A026500000000000000 "CCDM_CHQ: Cassette module 2: jam or medium too long"
001A_CHQ 0266_E 2 99 001A026600000000000000 "CCDM_CHQ: Media jam KLS5 - KSM"
001A_CHQ 0267_E 2 99 001A026700000000000000 "CCDM_CHQ: Error in cassette 1 during init"
001A_CHQ 0268_E 2 99 001A026800000000000000 "CCDM_CHQ: Error in cassette 2 during init"
001A_CHQ 0269_E 2 99 001A026900000000000000 "CCDM_CHQ: Error in cassette 1"
001A_CHQ 026A_E 2 99 001A026A00000000000000 "CCDM_CHQ: Incorrect position of deflector in transfer unit"
001A_CHQ 100F_E 2 99 001A100F00000000000000 "CCDM_CHQ: Device Handler not initialised"
001A_CHQ 1420_E 2 99 001A142000000000000000 "CCDM_CHQ: Invalid handle in parameter block"
001A_CHQ 1421_E 2 99 001A142100000000000000 "CCDM_CHQ: Illegal device number was transferred when the
handle was created"
001A_CHQ 1424_E 2 99 001A142400000000000000 "CCDM_CHQ: Device handler currently locked by another
user"
001A_CHQ 8000_E 2 99 001A800000000000000000 "CCDM_CHQ: Invalid parameter in command"
001A_CHQ 8001_E 2 99 001A800100000000000000 "CCDM_CHQ: No document inserted"
001A_CHQ 8002_E 2 99 001A800200000000000000 "CCDM_CHQ: Function CscPrtRead was called, but no MICR
mode via CscPrtControl selected"
001A_CHQ 8003_E 2 99 001A800300000000000000 "CCDM_CHQ: The CCDM device handler presumes MS-
Windows 2000 or MS-Windows XP"
001A_CHQ 8004_E 2 99 001A800400000000000000 "CCDM_CHQ: There is still a document in the scanner"
001A_CHQ 8005_E 2 99 001A800500000000000000 "CCDM_CHQ: The CCDM-HW send unknown response to a
command"
001A_CHQ 8006_E 2 99 001A800600000000000000 "CCDM_CHQ: Cannot open raw file (CCDM.RAW)"
001A_CHQ 8007_E 2 99 001A800700000000000000 "CCDM_CHQ: Error writing raw file (CCDM.RAW)"
001A_CHQ 8008_E 2 99 001A800800000000000000 "CCDM_CHQ: The shutter could not be opened"
001A_CHQ 8009_E 2 99 001A800900000000000000 "CCDM_CHQ: The shutter could not be closed"
001A_CHQ 800A_E 2 99 001A800A00000000000000 "CCDM_CHQ: Invalid CRC (check character) received with
encrypted line"
001A_CHQ 800B_E 2 99 001A800B00000000000000 "CCDM_CHQ: Wrong value for FRM_LOAD in Registry with
CSCCCDM"
001A_CHQ 800C_E 2 99 001A800C00000000000000 "CCDM_CHQ: Firmware loading could not be completed"
001A_CHQ 800D_E 2 99 001A800D00000000000000 "CCDM_CHQ: Wrong value for LED, LED_FLASH or
LED_FREQ"
001A_CHQ 800E_E 2 99 001A800E00000000000000 "CCDM_CHQ: Wrong value for MAX_HEIGHT_CHEQUE,
MAX_HEIGHT_NOTES, MAX_WIDTH_CHEQUE"
001A_CHQ 800F_E 2 99 001A800F00000000000000 "CCDM_CHQ: Wrong value for the parameter
SCAN_FRONT_RED, SCAN_FRONT_GREEN"
001A_CHQ 8010_E 2 99 001A801000000000000000 "CCDM_CHQ: Wrong value for SHUTTER_BEHAVIOUR in
Registry with CSCCCDM"
001A_CHQ 8011_E 2 99 001A801100000000000000 "CCDM_CHQ: The thread which receives the image/signature
data could not started"
001A_CHQ 8012_E 2 99 001A801200000000000000 "CCDM_CHQ: The thread which receives the image/signature
data could not stopped"
001A_CHQ 8013_E 2 99 001A801300000000000000 "CCDM_CHQ: The pointer "
001A_CHQ 8014_E 2 99 001A801400000000000000 "CCDM_CHQ: The transferred cheque data (pointer, length) is
illegal"
001A_CHQ 8015_E 2 99 001A801500000000000000 "CCDM_CHQ: No cheque number received while dispensing
cheques or sheets"
001A_CHQ 8016_E 2 99 001A801600000000000000 "CCDM_CHQ: An error occurred while opening a currency file"
001A_CHQ 8017_E 2 99 001A801700000000000000 "CCDM_CHQ: An error occurred while opening a currency file"
001A_CHQ 8018_E 2 99 001A801800000000000000 "CCDM_CHQ: The currency file is not dedicated for the
installed note sensor"
001A_CHQ 8019_E 2 99 001A801900000000000000 "CCDM_CHQ: A wrong keyword inside a currency file has
been detected"
001A_CHQ 801A_E 2 99 001A801A00000000000000 "CCDM_CHQ: The loading of new currency data not possible"
001A_CHQ 801B_E 2 99 001A801B00000000000000 "CCDM_CHQ: New currency file loaded during installation"
001A_CHQ 801C_E 2 99 001A801C00000000000000 "CCDM_CHQ: Error occurred while opening firmware file"
001A_CHQ 801D_E 2 99 001A801D00000000000000 "CCDM_CHQ: Error occured while reading sensor firmware
file"
001A_CHQ 801E_E 2 99 001A801E00000000000000 "CCDM_CHQ: Firmware file is not dedicated for the installed
sensor"
001A_CHQ 801F_E 2 99 001A801F00000000000000 "CCDM_CHQ: Wrong value for SENS_FRM_LOAD in Registry
with CSCCCDM"

U25604-J-Z745-1-7600 May 2011 53

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
001A_CHQ 8020_E 2 99 001A802000000000000000 "CCDM_CHQ: Not possible to read the current note table from
the note sensor"
001A_CHQ 8021_E 2 99 001A802100000000000000 "CCDM_CHQ: Too much notes inserted"
001A_CHQ 8022_E 2 99 001A802200000000000000 "CCDM_CHQ: Timeout while waiting for signature ID"
001A_CHQ 8023_E 2 99 001A802300000000000000 "CCDM_CHQ: Number of detected cheques on ESCROW and
number of scanned cheques different"
001A_CHQ 8024_E 2 99 001A802400000000000000 "CCDM_CHQ: Error in previous transaction"
001A_CHQ 8025_E 2 99 001A802500000000000000 "CCDM_CHQ: Error in previous transaction"
001A_CHQ 8026_E 2 99 001A802600000000000000 "CCDM_CHQ: Error occurred while opening a sensor firmware
file"
001A_CHQ 8027_E 2 99 001A802700000000000000 "CCDM_CHQ: Error occured while reading a CCDM firmware
file"
001A_CHQ 8028_E 2 99 001A802800000000000000 "CCDM: The firmware file is not valid for the current CCDM
hardware"
001A_CHQ 8030_E 2 99 001A803000000000000000 "CCDM_CHQ: The checksum of the signature data of a note is
wrong"
001A_CHQ 8031_E 2 99 001A803100000000000000 "CCDM_CHQ: Invalid storing exceptions"
001A_CHQ 9201_E 2 99 001A920100000000000000 "CCDM_CHQ: Illegal arguments calling IMACON.DLL"
001A_CHQ 9202_E 2 99 001A920200000000000000 "CCDM_CHQ: Cannot open input file"
001A_CHQ 9203_E 2 99 001A920300000000000000 "CCDM_CHQ: Error reading input"
001A_CHQ 9204_E 2 99 001A920400000000000000 "CCDM_CHQ: Cannot open output file"
001A_CHQ 9205_E 2 99 001A920500000000000000 "CCDM_CHQ: Error writing output file"
001A_CHQ 9206_E 2 99 001A920600000000000000 "CCDM_CHQ: Not enough memory"
001A_CHQ 9207_E 2 99 001A920700000000000000 "CCDM_CHQ: Image too long"
001A_CHQ 9208_E 2 99 001A920800000000000000 "CCDM_CHQ: Image too large (for TIF)"
001A_CHQ 9209_E 2 99 001A920900000000000000 "CCDM_CHQ: Image too small (<1 row)"
001A_CHQ 920A_E 2 99 001A920A00000000000000 "CCDM_CHQ: Error in final conversion step"
001A_CHQ 920B_E 2 99 001A920B00000000000000 "CCDM_CHQ: Error in temp file access"
001A_CHQ 920C_E 2 99 001A920C00000000000000 "CCDM_CHQ: Error loading imareco.dll"
001A_CHQ 92E0_E 2 99 001A92E000000000000000 "CCDM_CHQ: IMACON.DLL returns an error while generation
of JPG image"
001A_CHQ 92FF_E 2 99 001A92FF00000000000000 "CCDM_CHQ: IMACON.DLL returned undefined error"
001A_CHQ 9300_E 2 99 001A930000000000000000 "CCDM_CHQ: Internal error while calling DQF.DLL"
001A_CHQ 9301_E 2 99 001A930100000000000000 "CCDM_CHQ: Internal error while calling DQF.DLL"
001A_CHQ 9302_E 2 99 001A930200000000000000 "CCDM_CHQ: Internal error while calling DQF.DLL"
001A_CHQ 9303_E 2 99 001A930300000000000000 "CCDM_CHQ: Internal error while calling DQF.DLL"
001A_CHQ 9304_E 2 99 001A930400000000000000 "CCDM_CHQ: Internal error while calling DQF.DLL"
001A_CHQ 9305_E 2 99 001A930500000000000000 "CCDM_CHQ: Internal error while calling DQF.DLL"
001A_CHQ 93FF_E 2 99 001A93FF00000000000000 "CCDM_CHQ: DQF.DLL returned undefined error"
001A_CHQ E000_E 2 99 001AE00000000000000000 "CCDM_CHQ: Tray operating error (e.g. banknotes not correct
inserted)"
001A_CHQ E001_E 2 99 001AE00100000000000000 "CCDM_CHQ: Sheets not inserted in the given time period
(reported by CscwCcdmEntry(...))"
001A_CHQ E002_E 2 99 001AE00200000000000000 "CCDM_CHQ: Some or all notes or checks not taken by the
consumer"
001A_CHQ E003_E 2 99 001AE00300000000000000 "CCDM_CHQ: Some or all notes or checks not taken by the
consumer while retract to IO or box"
001A_CHQ E004_E 2 99 001AE00400000000000000 "CCDM_CHQ: Sheets available in the IO tray, e.g. rejected
notes or cheques after dispensing"
001A_CHQ E009_E 2 99 001AE00900000000000000 "CCDM_CHQ: A CCDM-Boot has been initiated by the
operator"
001A_CHQ E00A_E 2 99 001AE00A00000000000000 "CCDM_CHQ: Loaded firmware older than the firmware found
on disk"
001A_CHQ E00B_E 2 99 001AE00B00000000000000 "CCDM_CHQ: There is no firmware loaded in the CCCDM"
001A_CHQ E00C_E 2 99 001AE00C00000000000000 "CCDM_CHQ: Device handler was configured to switch LEDs
when customer action is neccessary"
001A_CHQ E00E_E 2 99 001AE00E00000000000000 "CCDM_CHQ: The currently existing note table has not been
loaded by CSC-W32"
001A_CHQ E010_E 2 99 001AE01000000000000000 "CCDM_CHQ: Return of the function CscCcdmInit() if a new
currency file has been detected"
001A_CHQ E011_E 2 99 001AE01100000000000000 "CCDM_CHQ: Returned by the function CscCcdmInit() if a
new currency file has been detected"
001A_CHQ E014_E 2 99 001AE01400000000000000 "CCDM_CHQ: One or more new firmware loaded automati-
cally by the Device Handler"
001A_CHQ E015_E 2 99 001AE01500000000000000 "CCDM_CHQ: Current loaded note table inconsistant to
sensor Firmware"

54 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
001A_CHQ E016_E 2 99 001AE01600000000000000 "CCDM_CHQ: Registry parameter CASS_CONFIG is not
correct"
001A_CHQ F000_E 2 99 001AF00000000000000000 "CCDM_CHQ: The firmware is not loaded in the CCDM"
001A_CHQ F001_E 2 99 001AF00100000000000000 "CCDM_CHQ: The parameters of the command have a wrong
syntax"
001A_CHQ F002_E 2 99 001AF00200000000000000 "CCDM_CHQ: One of the locks is active or an error occurred
that requires correction"
001A_CHQ F003_E 2 99 001AF00300000000000000 "CCDM_CHQ: An error occurred during the execution of the
command"
001A_CHQ F004_E 2 99 001AF00400000000000000 "CCDM_CHQ: The safe door must be open for the execution
of the actual command"
001A_CHQ F005_E 2 99 001AF00500000000000000 "CCDM_CHQ: The command cannot be executed at this point
of time"
001A_CHQ F006_E 2 99 001AF00600000000000000 "CCDM_CHQ: The application program tried to dispense a
bundle, but the IO-tray is empty"
001A_CHQ F007_E 2 99 001AF00700000000000000 "CCDM_CHQ: Customer did not remove the bundle until the
command has timed out"
001A_CHQ F008_E 2 99 001AF00800000000000000 "CCDM_CHQ: Cheques or sheets are not correct inserted"
001A_CHQ F009_E 2 99 001AF00900000000000000 "CCDM_CHQ: CCDM firmware initiated a boot"
001A_CHQ F00A_E 2 99 001AF00A00000000000000 "CCDM_CHQ: Note sensor module reports hardware error"
001A_CHQ F00B_E 2 99 001AF00B00000000000000 "CCDM_CHQ: Note sensor module reports firmware error"
001A_CHQ F00C_E 2 99 001AF00C00000000000000 "CCDM_CHQ: Comunication error reported by the sensor
module"
001A_CHQ F00D_E 2 99 001AF00D00000000000000 "CCDM_CHQ: Note sensor hase detected an error in the data
format"
001A_CHQ F00E_E 2 99 001AF00E00000000000000 "CCDM_CHQ: Note sensor has detected an error in the note
table"
001A_CHQ F00F_E 2 99 001AF00F00000000000000 "CCDM_CHQ: The assignment of a note is wrong"
001A_CHQ F010_E 2 99 001AF01000000000000000 "CCDM_CHQ: The sensor couldn't read the document (note or
cheque)"
001A_CHQ F011_E 2 99 001AF01100000000000000 "CCDM_CHQ: An error occured during downloding of firmware
or currency data"
001A_CHQ F012_E 2 99 001AF01200000000000000 "CCDM_CHQ: The sensor responded with an unknown error
code"
001A_CHQ F0A0_E 2 99 001AF0A000000000000000 "CCDM_CHQ: Bundle with detected metal in tray"
001A_CHQ F0A1_E 2 99 001AF0A100000000000000 "CCDM_CHQ: Tray is occupied with not dispensable notes or
cheques"
001A_CHQ F0A2_E 2 99 001AF0A200000000000000 "CCDM_CHQ: A not specified tray error occurred"
001A_CHQ F0A3_E 2 99 001AF0A300000000000000 "CCDM_CHQ: Shutter error while command CscCcdmCashIn"
001A_CHQ F0A4_E 2 99 001AF0q010000000000000 "CCDM_CHQ: CscCcdmTransport command received, but the
ESCROW is empty"
001A_CHQ F0A5_E 2 99 001AF0A500000000000000 "CCDM_CHQ: ESCROW full while dispending a bundle"
001A_CHQ F0A6_E 2 99 001AF0A600000000000000 "CCDM_CHQ: Cheques or sheets on ESCROW while
performing the next transaction"
001A_CHQ F0A7_E 2 99 001AF0A700000000000000 "CCDM_CHQ: Cheques or notes jammed on the ESCROW"
001A_CHQ F0A8_E 2 99 001AF0A800000000000000 "CCDM_CHQ: There exists no hardware equipment to perform
the requested command"
001A_CHQ F0A9_E 2 99 001AF0A900000000000000 "CCDM_CHQ: Sheets detected in front of IO tray before
shutter open"

U25604-J-Z745-1-7600 May 2011 55

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Encryption Decryption Module (Class: 000F)

The following table lists the M-Status and M-Data codes assigned to the device
class Encryption Decryption Module (EDM).

Table 8: Encryption Decryption Module (EDM) (Class: 000F)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
000F DEFA_W 2 00 00000000 "EDM: DEFAULT_WARNING"
000F DEFA_E 4 00 00000000 "EDM: DEFAULT_ERROR"
000F 8000_E 2 98 00000000 "EDM: An undefined internal error has occurred in the firmware"
000F 8001_E 2 98 00000000 "EDM: The firmware cannot execute the command"
000F 8002_E 2 11 00000000 "EDM: Key address not allowed"
000F 8003_E 2 98 00000000 "EDM: EDM RAM error"
000F 8004_E 2 01 00000000 "EDM: Parity error in key"
000F 8005_E 2 02 00000000 "EDM: Internal hardware E-PROM error"
000F 8006_E 2 02 00000000 "EDM: Internal hardware EE-PROM error"
000F 8007_E 2 02 00000000 "EDM: The EDM command does not exist"
000F 8008_E 2 02 00000000 "EDM: The EDM key RAM is defective"
000F 8009_E 2 56 00000000 "EDM: The transferred data length is invalid"
000F 800A_E 2 02 00000000 "EDM: An invalid block ID is in the V24 protocal"
000F 800B_E 2 12 00000000 "EDM: The device ID is invalid"
000F 800C_E 2 00 00000000 "EDM: Command already transferred to the EDM firmware"
000F 800D_E 2 56 00000000 "EDM: Command length and data length invalid"
000F 800E_E 2 12 00000000 "EDM: Output parameters not defined"
000F 800F_E 2 12 00000000 "EDM: Data contains invalid ASCII characters"
000F 8010_E 2 12 00000000 "EDM: Wrong sequence of commands"
000F 8011_E 2 12 00000000 "EDM: Wrong ID"
000F 8040_E 2 00 00000000 "EDM: No transaction active, command cannot be executed"
000F 8041_E 2 11 00000000 "EDM: No or not enough PIN numbers entered"
000F 8050_E 2 02 00000000 "EDM: Key-splitting E-PROM not connected or wrong"
000F 8051_E 2 02 00000000 "EDM: Checksum of key-splitting E-PROM is wrong"
000F 8052_E 2 01 00000000 "EDM: Parity error in key of the key-splitting E-PROM"
000F 8053_E 2 02 00000000 "EDM: Invalid table charater in key-splitting E-PROM"
000F 8060_E 2 07 00000000 "EDM: V24 connection PC to EDM was/is interrupted"
000F 8061_E 2 02 00000000 "EDM: Battery problem of EDM"
000F 8062_E 2 00 00000000 "EDM: EPP detects an error when entering a key"
000F 8101_E 2 13 00000000 "EDM: EDM not initialized"
000F 8102_E 2 56 00000000 "EDM: Length in the parameter cannot be divided by eight"
000F 8103_E 2 00 00000000 "EDM: The DLL command specification is invalid"
000F 8104_E 2 11 00000000 "EDM: The command parameters are incorrect"
000F 8105_E 2 38 00000000 "EDM: Invalid key number"
000F 8107_E 2 07 00000000 "EDM: Error during data transmission"
000F 810B_E 2 56 00000000 "EDM: Initialize vector has wrong length"
000F 810C_E 2 16 00000000 "EDM: No free space in IV array"
000F 810E_E 2 02 00000000 "EDM: System could not provide dynamic memory"
000F 8111_E 2 56 00000000 "EDM: Wrong maximum PIN length with job EdmStartPin"
000F 8112_E 2 70 00000000 "EDM: Wrong minimum PIN length with job EdmStartPin"
000F 8113_E 2 70 00000000 "EDM: Invalid field for leading zeros in the PIN structure"
000F 8114_E 2 70 00000000 "EDM: Invalid field for acknowledge key in the PIN structure"
000F 8115_E 2 70 00000000 "EDM: Invalid mode in the PIN structure"
000F 8116_E 2 70 00000000 "EDM: Wrong PIN position in PIN field"
000F 8118_E 2 70 00000000 "EDM: Wrong structure entry in field TestMode"
000F 8119_E 2 70 00000000 "EDM: Invalid number of PIN digits"
000F 811A_E 2 02 00000000 "EDM: This API is not supported by the device handler"
000F 811B_E 2 02 00000000 "EDM: The API could not be loaded"
000F 811C_E 2 07 00000000 "EDM: This function cannot be accessed with the firmware"
000F 811E_E 2 07 00000000 "EDM: Cannot access full length of data area in a structure"
000F 811F_E 2 07 00000000 "EDM: Invalid encryption mode specified for key reset"
000F 8120_E 2 07 00000000 "EDM: The total protocol monitoring time has been exceeded"

56 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
000F 8121_E 2 00 00000000 "EDM: The maximum number of receive repeats has been reached"
000F 8122_E 2 00 00000000 "EDM: The received acknowledge type is invalid"
000F 8123_E 2 07 00000000 "EDM: Common protocol error in EPP response data"
000F 8124_E 2 12 00000000 "EDM: Key Generating Keys in REGISTRY/CSCINI are not correct"
000F 8125_E 2 12 00000000 "EDM: Invalid character in KGK Keyset in REGISTRY/CSCINI"
000F 8126_E 2 13 00000000 "EDM: Error when encrypting a Masterkey"
000F 8127_E 2 75 00000000 "EDM: The check is negativ"

Encryption Decryption Software (Class: 0011)

The following table lists the M-Status and M-Data codes assigned to the device
class Encryption Decryption Software (EDS).

Table 9: Encryption Decryption Software (EDS) (Class: 0011)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0011 DEFA_W 2 00 00000000 "EDS: DEFAULT_WARNING"
0011 DEFA_E 4 00 00000000 "EDS: DEFAULT_ERROR"
0011 8001_E 2 13 00000000 "EDS: No transport key is loaded"
0011 8002_E 2 22 00000000 "EDS: An invalid transport key is available"
0011 8003_E 2 13 00000000 "EDS: No CBC key is loaded"
0011 8004_E 2 01 00000000 "EDS: An invalid CBC key is available"
0011 8005_E 2 13 00000000 "EDS: No initial vector loaded"
0011 8007_E 2 13 00000000 "EDS: No ECB key is loaded"
0011 8008_E 2 01 00000000 "EDS: An invalid ECB key is available"
0011 800A_E 2 11 00000000 "EDS: The length specified in the parameter block is zero"
0011 800B_E 2 56 00000000 "EDS: Length specified in param. block cannot divided by eight"
0011 800C_E 2 13 00000000 "EDS: Error while accessing the CSCEDSKEY key file"

U25604-J-Z745-1-7600 May 2011 57

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Card Reader (Class: 0008/AA08)

The following table lists the M-Status and M-Data codes assigned to the device
class Card Reader. Class AA08 is the USB class assigned to the Card Reader.

Refer to section ”Error Class Mapping” on page 5.

Table 10: Card Reader (Class: 0008/AA08)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0008 DEFA_E 4 00 0000000000 "CARD READER: DEFAULT_ERROR"
0008 DEFA_W 2 00 0000000000 "CARD READER: DEFAULT_WARNING"
0008 0000_W 0 00 0000000000 "CARD READER: If no warning found"
0008 0000_E 2 00 0000000000 "CARD READER: If no error found"
0008 1004_E 2 03 0205000000 "CARD READER: Length of input buffer in parameter block invalid"
0008 1005_E 2 03 0205000000 "CARD READER: Length of output buffer in parameter block invalid"
0008 100F_E 4 03 0205000000 "CARD READER: Device handler not initialized (card trap ?)"
0008 1015_E 4 03 0205000000 "CARD READER: Executed command not permitted or possible"
0008 1420_E 4 03 0205000000 "CARD READER: Communication problem"
0008 1424_E 4 03 0205000000 "CARD READER: Communication problem"
0008 E000_E 2 00 0000000000 "CARD READER: Invalid command (internal error)"
0008 E001_E 2 00 0000000000 "CARD READER: Parameters not correct"
0008 E002_E 2 13 0000000000 "CARD READER: Command cannot be executed"
0008 E004_E 2 00 0000000000 "CARD READER: Invalid data with a command"
0008 E006_E 4 20 0000000000 "CARD READER: Command cannot be executed, device in maintanance mode "
0008 E009_E 4 20 0000000000 "CARD READER: Internal encountered in firmware of IDCU device"
0008 E00A_E 2 18 0000000000 "CARD READER: Card jammed (possible manipulation)"
0008 E00B_E 3 07 0000000000 "CARD READER: The sensors report an invalid position of the shutter"
0008 E00C_E 2 08 0000000000 "CARD READER: Sensors are defect"
0008 E00D_E 3 13 0000000000 "CARD READER: Card too long"
0008 E00E_E 3 13 0000000000 "CARD READER: Card too short"
0008 E00F_E 4 20 0000000000 "CARD READER: Memory error"
0008 E010_E 3 13 0000000000 "CARD READER: Card has shifted"
0008 E011_E 3 13 0000000000 "CARD READER: The card is jammed"
0008 E012_E 2 08 0000000000 "CARD READER: Shutter switch or width switch defective"
0008 E013_E 2 11 0000000000 "CARD READER: Mechanical error of IDCU device"
0008 E014_E 0 03 0000000000 "CARD READER: The data read from the cards have the wrong parity"
0008 E015_E 2 03 0000000000 "CARD READER: The card data could not be read"
0008 E016_E 2 04 0000000000 "CARD READER: The WRITE data is faulty on the card"
0008 E017_E 2 03 0000000000 "CARD READER: The end character only was found on the track when read"
0008 E01E_E 4 20 0000000000 "CARD READER: Power fail during a command"
0008 E01F_E 4 20 0000000000 "CARD READER: The DSR signal is in OFF status"
0008 E028_E 2 12 0000000000 "CARD READER: The card was removed during transport from the output position
to the reject box"
0008 E070_E 4 20 0000000000 "CARD READER: There is presently no firmware loaded in the device"
0008 E071_E 4 20 0000000000 "CARD READER: There was a problem during the download of the firmware"
0008 E100_E 2 03 0000000000 "CARD READER: The card data could not be read"
0008 E101_E 3 18 0000000000 "CARD READER: Card jammed in optional stacker unit (possible manipulation)"
0008 E102_E 4 18 0000000000 "CARD READER: No card in the dispenser"
0008 E104_E 4 18 0000000000 "CARD READER: Card is clamped by the ID card unit"
0008 E180_E 2 03 0000000000 "CARD READER: The chip card controller in the IDU or the IC card is defect"
0008 E182_E 2 03 0000000000 "CARD READER: The chip card could not be activated"
0008 E183_E 2 03 0000000000 "CARD READER: The chip card could not be deactivated"
0008 E184_E 2 03 0000000000 "CARD READER: An error occurred during communication with the chip card"
0008 E185_E 2 03 0000000000 "CARD READER: A forced interruption command was received from the chip
card"

58 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
0008 E186_E 2 03 0000000000 "CARD READER: Error detected in response from the chip card"
0008 E187_E 2 03 0000000000 "CARD READER: The ATR information of the card is incorrect"
0008 7FFB_E 2 03 0000000000 "CARD READER: Chip card mode or SAM configuration not supported"
0008 7FFC_E 2 03 0000000000 "CARD READER: Flash memory needs to be reset"
0008 7FFD_E 2 03 0000000000 "CARD READER: Trigger level of transactions has been reached"
0008 7FFE_E 2 03 0000000000 "CARD READER: Error occurred during access of SEL DH to switch LED's"
0008 7FFF_E 2 03 0000000000 "CARD READER: Temporary power failure between last job and current job"
0008 F001_E 2 03 0205000000 "CARD READER: Maximum number of tries per command is reached"
0008 F002_E 2 20 0000000000 "CARD READER: Not enough data received from IDCU"
0008 F003_E 2 20 0000000000 "CARD READER: Error in communication protocal with IDCU"
0008 F004_E 2 20 0000000000 "CARD READER: V24 line error No ENQ was sent"
0008 F005_E 2 20 0000000000 "CARD READER: Response from IDCU is incorrect"
0008 F006_E 2 20 0000000000 "CARD READER: Invalid status"
0008 F007_E 2 20 0000000000 "CARD READER: Invalid parameters with the command"
0008 F008_E 2 20 0000000000 "CARD READER: Internal RESET not possible (internal error)"
0008 F009_E 2 20 0000000000 "CARD READER: TYPE in Registry/CSCINI with CSCIDU is incorrect"
0008 F00B_E 2 20 0000000000 "CARD READER: False value for ID_PM in Registry/CSCINI with CSCIDU"
0008 F00C_E 2 20 0000000000 "CARD READER: Wrong value for ID_PD in Registry/CSCINI with CSCIDU"
0008 F00D_E 2 20 0000000000 "CARD READER: False value for ID_WV in Registry/CSCINI with CSCIDU"
0008 F00E_E 2 20 0000000000 "CARD READER: False value for ID_SH in Registry/CSCINI with CSCIDU"
0008 F00F_E 2 20 0000000000 "CARD READER: Command is not available in this configuration"
0008 F011_E 2 04 0000000000 "CARD READER: V24 send command not terminated with correct length"
0008 F012_E 2 20 0000000000 "CARD READER: NAK received as a response"
0008 F013_E 2 00 0000000000 "CARD READER: CANCEL not possible"
0008 F014_E 2 00 0000000000 "CARD READER: A CsclduCancel command has already been sent"
0008 F015_E 2 05 0000000000 "CARD READER: No card in the unit to perform the command"
0008 F016_E 2 00 0000000000 "CARD READER: Wrong value for MSS in Registry/CSCINI with CSCIDU"
0008 F017_E 4 20 0000000000 "CARD READER: The device handler MSS could not be loaded"
0008 F018_E 2 00 0000000000 "CARD READER: Wrong value for ID_WT in Registry/CSCINI with CSCIDU"
0008 F019_E 2 00 0000000000 "CARD READER: Wrong value for ID_RJ in Registry/CSCINI with CSCIDU"
0008 F01A_E 2 00 0000000000 "CARD READER: Wrong value for MAN_RECOG in Registry/CSCINI with
CSCIDU"
0008 F01B_E 4 20 0000000000 "CARD READER: The device handler CSCWHYBDLL could not be loaded"
0008 F01C_E 2 00 0000000000 "CARD READER: Wrong value for LED in Registry/CSCINI with CSCIDU"
0008 F01D_E 4 20 0000000000 "CARD READER: The device handler CSCWSELDLL could not be loaded"
0008 F01E_E 4 20 0000000000 "CARD READER: The device handler CSCWCITDLL could not be loaded"
0008 F020_E 4 20 0000000000 "CARD READER: The specified firmware file has not the correct format"
0008 F021_E 4 20 0000000000 "CARD READER: The parameter INIT_LOADER_CTL in the Registry/CSCINI is
incorrect"
0008 F022_E 4 20 0000000000 "CARD READER: DH CSCWTRADLL and /or CSCWESTDLL could not be
loaded"
0008 F023_E 4 20 0000000000 "CARD READER: TRANSACTION-ACTIVE in the Registry/CSCINI is incorrect"
0008 F024_E 4 20 0000000000 "CARD READER: TRANSACTION-TRIGGER in the Registry/CSCINI is incorrect"
0008 F025_E 4 20 0000000000 "CARD READER: ERROR-MAPPING in the Registry/CSCINI is incorrect"
0008 F026_E 4 20 0000000000 "CARD READER: Parameter CHIPMODE in registry is incorrect"
0008 F027_E 4 20 0000000000 "CARD READER: Wrong value for ENTRY_HANDLING"
0008 F028_E 4 20 0000000000 "CARD READER: Device handler CSCSWI.DLL could not be loaded"
0008 F029_E 4 20 0000000000 "CARD READER: Device handler CSCEDS.DLL could not be loaded"
0008 F02A_E 4 20 0000000000 "CARD READER: Device handler CSCEDM.DLL could not be loaded"
0008 F02B_E 4 20 0000000000 "CARD READER: Device handler CSCWICM.DLL could not be loaded"
0008 F02C_E 4 20 0000000000 "CARD READER: Parameter SAMx_MODE incorrect"
0008 F02D_E 4 20 0000000000 "CARD READER: Parameter SAM incorrect"
0008 F02E_E 4 20 0000000000 "CARD READER: Device handler CSCWV2X.DLL could not be loaded"
0008 F02F_E 4 20 0000000000 "CARD READER: Device handler CSCWHUS.DLL could not be loaded"
0008 FE08_E 4 20 FE08000000 "CARD READER: V24 Communication timeout"
0008 FE09_E 4 20 FE09000000 "CARD READER: V24 Communication timeout"
0008 FE0A_E 2 20 FE0A000000 "CARD READER: V24 Communication error"
0008 FE7B_E 4 00 0000000000 "CARD READER: Initialization failed"
0008 FE85_E 4 20 FE85000000 "CARD READER: Comm driver open failure, check line connection"
AA08 DEFA_W 4 00 0000000000 "USB/IDCU: DEFAULT_WARNING"
AA08 DEFA_E 4 00 0000000000 "USB/IDCU: DEFAULT_ERROR"
AA08 8000_E 4 00 0000000000 "USB/IDCU: Unexpected descriptor was reported from USB device"
AA08 8001_E 4 00 0000000000 "USB/IDCU: Device not found"

U25604-J-Z745-1-7600 May 2011 59

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
AA08 8002_E 4 00 0000000000 "USB/IDCU: Not enough memory available"
AA08 8003_E 4 00 0000000000 "USB/IDCU: It was no endpoint found in the descriptor"
AA08 8004_E 4 00 0000000000 "USB/IDCU: The creation of the list of USB devices failed"
AA08 FE09_E 4 00 0000000000 "USB/IDCU: USB read command could not be executed in the specified
monitoring time"
AA08 FE0A_E 4 00 0000000000 "USB/IDCU: USB READ command is cancelled by the user"
AA08 FE89_E 4 00 0000000000 "USB/IDCU: The pointer pData is illegal"
AA08 FE9C_E 4 00 0000000000 "USB/IDCU: The length in DataSize is 0 (zero)"
AA08 0001_E 4 00 0000000000 "USB/IDCU: CRC error has been detected"
AA08 0002_E 4 00 0000000000 "USB/IDCU: Bit stuffing error has been detected"
AA08 0003_E 4 00 0000000000 "USB/IDCU: DATA toggle mismatch has been detected"
AA08 0004_E 4 00 0000000000 "USB/IDCU: STALLPID has been detected, error is reported by the USB host
controller"
AA08 0005_E 4 00 0000000000 "USB/IDCU: USB device is not responding, error is reported by the USB host"
AA08 0006_E 4 00 0000000000 "USB/IDCU: PID check has failed, error is reported by the USB host controller"
AA08 0007_E 4 00 0000000000 "USB/IDCU: Unexpected PID detected, error is reported by the USB host"
AA08 0008_E 4 00 0000000000 "USB/IDCU: Data overrun error detected, error is reported by the USB host"
AA08 0009_E 4 00 0000000000 "USB/IDCU: Data underrun error detected, error is reported by the USB host"
AA08 000A_E 4 00 0000000000 "USB/IDCU: Error code is reserved by the USB host controller driver"
AA08 000B_E 4 00 0000000000 "USB/IDCU: Error code is reserved by the USB host controller driver"
AA08 000C_E 4 00 0000000000 "USB/IDCU: Buffer overrun has been detected, error is reported by the USB host"
AA08 000D_E 4 00 0000000000 "USB/IDCU: Buffer underrun has been detected, error is reported by the USB
host"
AA08 000F_E 4 00 0000000000 "USB/IDCU: Buffer was not accessed, error is reported by the USB host"
AA08 0010_E 4 00 0000000000 "USB/IDCU: FIFO error has been detected, PCI bus latency was too long"
AA08 0011_E 4 00 0000000000 "USB/IDCU: XACT error has been detected, error is reported by the USB host"
AA08 0012_E 4 00 0000000000 "USB/IDCU: Device is babbling, data transfer phase exceeds the USB frame
length"
AA08 0013_E 4 00 0000000000 "USB/IDCU: Data buffer error has been detected, error is reported by the USB
host"
AA08 0030_E 4 00 0000000000 "USB/IDCU: Endpoint has been halted by the USB bus driver USBD"
AA08 0100_E 4 00 0000000000 "USB/IDCU: Memory allocation attempt has failed, error is reported by the USB
bus"
AA08 0200_E 4 00 0000000000 "USB/IDCU: Invalid URB function code has been passed, error is reported by the
USB"
AA08 0300_E 4 00 0000000000 "USB/IDCU: Invalid parameter has been passed, error is reported by the USB
bus"
AA08 0400_E 4 00 0000000000 "USB/IDCU: There are data transfer requests pending for the device"
AA08 0500_E 4 00 0000000000 "USB/IDCU: Request has failed, error is reported by the USB bus driver USBD"
AA08 0600_E 4 00 0000000000 "USB/IDCU: Invalid pipe handle has been passed, error is reported by the USB
bus"
AA08 0700_E 4 00 0000000000 "USB/IDCU: There is not enough bandwidth available, error is reported by the
USB bus"
AA08 0800_E 4 00 0000000000 "USB/IDCU: Internal host controller error has been detected"
AA08 0900_E 4 00 0000000000 "USB/IDCU: Short transfer has been detected, error is reported by the USB bus"
AA08 0A00_E 4 00 0000000000 "USB/IDCU: Bad start frame has been specified, error is reported by the USB bus"
AA08 0B00_E 4 00 0000000000 "USB/IDCU: Asynchronous request has failed, error is reported by the USB bus
driver"
AA08 0C00_E 4 00 0000000000 "USB/IDCU: USB frame control is currently owned, error is reported by the USB
bus"
AA08 0D00_E 4 00 0000000000 "USB/IDCU: USB frame control is currently not owned, error is reported by the
USB"
AA08 0E00_E 4 00 0000000000 "USB/IDCU: Operation is not supported, error is reported by the USB bus driver"
AA08 0F00_E 4 00 0000000000 "USB/IDCU: Invalid configuration descriptor was reported by the device"
AA08 1000_E 4 00 0000000000 "USB/IDCU: Operation has failed, error is reported by the USBIO driver"
AA08 1001_E 4 00 0000000000 "USB/IDCU: Invalid input buffer has been passed to an IOCTL operation"
AA08 1002_E 4 00 0000000000 "USB/IDCU: Invalid output buffer has been passed to an IOCTL operation"
AA08 1003_E 4 00 0000000000 "USB/IDCU: There is not enough system memory available to complete the
operation"
AA08 1004_E 4 00 0000000000 "USB/IDCU: There are read or write requests pending, error is reported by the
USBIO"
AA08 1005_E 4 00 0000000000 "USB/IDCU: USB device is already configured, error is reported by the USBIO"
AA08 1006_E 4 00 0000000000 "USB/IDCU: The USB device is not configured, error is reported by the USBIO
driver"
AA08 1007_E 4 00 0000000000 "USB/IDCU: There are open pipes, error is reported by the USBIO driver"
AA08 1008_E 4 00 0000000000 "USB/IDCU: Either the handle is already bound to a pipe"

60 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
AA08 1009_E 4 00 0000000000 "USB/IDCU: Handle is not bound to a pipe, error is reported by the USBIO driver"
AA08 100A_E 4 00 0000000000 "USB/IDCU: USB device has been removed from the system"
AA08 100B_E 4 00 0000000000 "USB/IDCU: Specified control code is not supported"
AA08 100C_E 4 00 0000000000 "USB/IDCU: Operation has been timed out, error is reported by the USBIO driver"
AA08 100D_E 4 00 0000000000 "USB/IDCU: Invalid recipient has been specified"
AA08 100E_E 4 00 0000000000 "USB/IDCU: Either an invalid request type has been specified"
AA08 100F_E 4 00 0000000000 "USB/IDCU: Invalid IOCTL code has been specified, error is reported by the
USBIO"
AA08 1010_E 4 00 0000000000 "USB/IDCU: Direction of the data transfer request is not supported by that pipe"
AA08 1011_E 4 00 0000000000 "USB/IDCU: Number of asynchronous data packets specified in an asynchronous
read"
AA08 1012_E 4 00 0000000000 "USB/IDCU: Memory resources are exhausted. This error is reported by the
USBIO driver"
AA08 1013_E 4 00 0000000000 "USB/IDCU: The specified pipe was not found in the current configuration"
AA08 1014_E 4 00 0000000000 "USB/IDCU: An invalid asynchronous data packet has been specified"
AA08 1015_E 4 00 0000000000 "USB/IDCU: There are not enough system resources to complete the operation"
AA08 1016_E 4 00 0000000000 "USB/IDCU: Specified interface was not found in the current configuration"
AA08 1017_E 4 00 0000000000 "USB/IDCU: Operation cannot be executed while the USB device is in the current
state"
AA08 1018_E 4 00 0000000000 "USB/IDCU: Invalid parameter has been specified with an IOCTL operation"
AA08 1019_E 4 00 0000000000 "USB/IDCU: Evaluation interval of the USBIO DEMO version has expired"
AA08 101A_E 4 00 0000000000 "USB/IDCU: Invalid power state has been specified"
AA08 101B_E 4 00 0000000000 "USB/IDCU: Device has entered a power down state"
AA08 101C_E 4 00 0000000000 "USB/IDCU: API version reported by the USBIO driver does not match"
AA08 101D_E 4 00 0000000000 "USB/IDCU: Set configuration operation has failed, error is reported by the
USBIO"
AA08 1080_E 4 00 0000000000 "USB/IDCU: Operation has failed due to a restriction of the USBIO LIGHT version"
AA08 1081_E 4 00 0000000000 "USB/IDCU: Operation has failed due to a restriction of the USBIO LIGHT version"
AA08 1082_E 4 00 0000000000 "USB/IDCU: Operation has failed due to a restriction of the USBIO LIGHT version"
AA08 1083_E 4 00 0000000000 "USB/IDCU: Operation has failed due to a restriction of the USBIO LIGHT version"
AA08 1084_E 4 00 0000000000 "USB/IDCU: Operation has failed due to a restriction of the USBIO LIGHT version"
AA08 1085_E 4 00 0000000000 "USB/IDCU: Operation has failed due to a restriction of the USBIO LIGHT version"
AA08 1086_E 4 00 0000000000 "USB/IDCU: The operation has failed due to a restriction of the USBIO LIGHT
version"
AA08 1087_E 4 00 0000000000 "USB/IDCU: Operation has failed due to a restriction of the USBIO LIGHT version"
AA08 1100_E 4 00 0000000000 "USB/IDCU: The specified device object does not exist"
AA08 1102_E 4 00 0000000000 "USB/IDCU: Device object was opened, there is no valid handle to execute the
operation"
AA08 1104_E 4 00 0000000000 "USB/IDCU: Enumeration of the specified devices has failed"
AA08 1105_E 4 00 0000000000 "USB/IDCU: Invalid parameter has been passed to a function"
AA08 1106_E 4 00 0000000000 "USB/IDCU: Library setupapi.dll could not be loaded"
AA08 2000_E 4 00 0000000000 "USB/IDCU: Set configuration request has failed"
AA08 3000_E 4 00 0000000000 "USB/IDCU: Buffer is too small, error is reported by the USB bus driver USBD"
AA08 4000_E 4 00 0000000000 "USB/IDCU: Interface was not found, error is reported by the USB bus driver
USBD"
AA08 5000_E 4 00 0000000000 "USB/IDCU: Invalid pipe flags have been specified"
AA08 6000_E 4 00 0000000000 "USB/IDCU: Operation has been timed out, error is reported by the USB bus
driver"
AA08 7000_E 4 00 0000000000 "USB/IDCU: USB device is gone, error is reported by the USB bus driver USBD"

U25604-J-Z745-1-7600 May 2011 61

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Deposit Module (Class: 0017/AA17)

The following table lists the M-Status and M-Data codes assigned to the device
class Deposit Module. Class AA17 is the USB class assigned to Deposit
Module.

Refer to section ”Error Class Mapping” on page 5.

Table 11: Deposit Module (Class: 0017/AA17)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0017 DEFA_W 2 00 0000000000000000000000 "DEPOSIT: DEFAULT_WARNING"
0017 DEFA_E 4 00 0000000000000000000000 "DEPOSIT: DEFAULT_ERROR"
0017 0001_E 2 00 0000000000000000000000 "DEPOSIT: Device handler was configured to switch LEDs"
0017 0002_E 2 07 0000000000000000000000 "DEPOSIT: There is no firmware loaded"
0017 0003_E 2 07 0000000000000000000000 "DEPOSIT: Cannot open or read the firmware file on disk"
0017 0004_E 2 07 0000000000000000000000 "DEPOSIT: API-Function CscDpsOpen check validity of FW on
Disk"
0017 1420_E 4 00 0000000000000000000000 "DEPOSIT: Communication problem"
0017 8000_E 2 07 0000000000000000000000 "DEPOSIT: Undefined error code"
0017 8001_E 2 07 0000000000000000000000 "DEPOSIT: The DLL command specification is invalid"
0017 8002_E 2 07 0000000000000000000000 "DEPOSIT: The DLL command specification is invalid"
0017 8003_E 2 00 8000000000000000000000 "DEPOSIT: Deposit cassette not installed correctly"
0017 8004_E 2 01 0000000000000000000000 "DEPOSIT: Job cannot be executed because envelope in transport
path"
0017 8005_E 2 01 0000000000000000000000 "DEPOSIT: Envelope jammed in transport path"
0017 8006_E 2 00 0000000000000000000000 "DEPOSIT: Operator did not insert envelope during monitoring
period"
0017 8007_E 2 07 0000000000000000000000 "DEPOSIT: The envelope starting the feed operation"
0017 8008_E 2 02 0000000000000000000000 "DEPOSIT: Undefined status Defective sensor"
0017 8009_E 2 02 0000000000000000000000 "DEPOSIT: The dispensed envelope has not been"
0017 800A_E 2 04 0000000000000000000000 "DEPOSIT: Shutter could not be closed"
0017 800B_E 2 00 0000000000000000000000 "DEPOSIT: No envelopes available any longer"
0017 800C_E 2 01 0000000000000000000000 "DEPOSIT: Dispenser sensor could not detect the envelope"
0017 800D_E 2 08 0000000000000000000000 "DEPOSIT: End of the envelope reached before all chars could be
printed"
0017 800E_E 2 07 0000000000000000000000 "DEPOSIT: Print unit motor error"
0017 800F_E 2 07 0000000000000000000000 "DEPOSIT: Envelope under print head sensor could not detect
envelope"
0017 8010_E 2 01 0000000000000000000000 "DEPOSIT: Envelope in printer conveyor sensor could not detect
envelope"
0017 8011_E 2 07 0000000000000000000000 "DEPOSIT: Motor problem of conveyer transport"
0017 8012_E 2 01 0000000000000000000000 "DEPOSIT: Envelope in conveyor transport entry sensor could not
detect envelope"
0017 8013_E 2 01 0000000000000000000000 "DEPOSIT: Envelope in middle of conveyor transport sensor could
not detect envelope"
0017 8014_E 2 01 0000000000000000000000 "DEPOSIT: Envelope in conveyor transport exit sensor could not
detect envelope"
0017 8015_E 2 08 0000000000000000000000 "DEPOSIT: No connection between print unit and conveyor
transport"
0017 8016_E 2 07 0000000000000000000000 "DEPOSIT: No envelope dispenser or programming error"
0017 8017_E 2 08 0000000000000000000000 "DEPOSIT: Print head not locked or not available"
0017 8018_E 2 07 0000000000000000000000 "DEPOSIT: The inserted envelope is too long"
0017 8019_E 2 07 0000000000000000000000 "DEPOSIT: No envelope detected after command"
0017 8020_E 2 01 0000000000000000000000 "DEPOSIT: Failure of Envelope in shutter sensor"
0017 8021_E 2 07 0000000000000000000000 "DEPOSIT: Error when opening the bandage"
0017 8022_E 2 07 0000000000000000000000 "DEPOSIT: Error when closing the bandage"

62 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
0017 8023_E 2 06 0000000000000000000000 "DEPOSIT: Operator did not remove the offered envelope"
0017 8024_E 2 02 0000000000000000000000 "DEPOSIT: An error has occurred in the shutter"
0017 8025_E 2 01 0000000000000000000000 "DEPOSIT: An error has occurred on the bandage"
0017 80F0_E 2 00 0000000000000000000000 "DEPOSIT: Job cancelled by CANCEL"
0017 8102_E 2 07 0000000000000000000000 "DEPOSIT: Cannot access full length of data area in a structure"
0017 8104_E 2 07 0000000000000000000000 "DEPOSIT: Active function cannot be cancelled"
0017 8105_E 2 07 0000000000000000000000 "DEPOSIT: Cannot open the firmware file"
0017 8106_E 2 07 0000000000000000000000 "DEPOSIT: Cannot read the firmware file to be loaded"
0017 8107_E 2 07 0000000000000000000000 "DEPOSIT: Detect invalid firmware file data"
0017 8108_E 2 07 0000000000000000000000 "DEPOSIT: Detect an invalid checksum of the firmware file data"
0017 8200_E 2 07 0000000000000000000000 "DEPOSIT: A V24 WRITE command could not be executed"
0017 8201_E 2 07 0000000000000000000000 "DEPOSIT: A V24 READ command could not be executed"
0017 8202_E 2 07 0000000000000000000000 "DEPOSIT: Max no. of repeat transmissions reached"
0017 8203_E 2 07 0000000000000000000000 "DEPOSIT: Max no. of receive repeats has been reached"
0017 8204_E 2 07 0000000000000000000000 "DEPOSIT: Repetition counter expired"
0017 8205_E 2 07 0000000000000000000000 "DEPOSIT: The received acknowledge type is invalid"
0017 8206_E 2 07 0000000000000000000000 "DEPOSIT: Repetition counter expired"
0017 8207_E 2 07 0000000000000000000000 "DEPOSIT: Expected block length does not match transmitted block
length"
0017 8208_E 2 07 0000000000000000000000 "DEPOSIT: Error occurred during the CscDpsEntry job"
0017 8209_E 2 00 0000000000000000000000 "DEPOSIT: The CscDpsEntry job was cancelled by the user"
0017 8300_E 2 00 0000000000000000000000 "DEPOSIT: Wrong value for LED in Registry/CSCINI with CSCDPS"
0017 FE08_E 4 00 0000000000000000000000 "DEPOSIT: V24 Communication timeout"
0017 FE09_E 4 00 0000000000000000000000 "DEPOSIT: V24 Communication timeout"
0017 FE85_E 4 00 0000000000000000000000 "DEPOSIT: Communication problem"
AA17 DEFA_W 4 00 0000000000000000000000 "USB/DEP: DEFAULT_WARNING"
AA17 DEFA_E 4 00 0000000000000000000000 "USB/DEP: DEFAULT_ERROR"
AA17 8000_E 4 00 0000000000000000000000 "USB/DEP: Unexpected descriptor was reported from USB device"
AA17 8001_E 4 00 0000000000000000000000 "USB/DEP: Device not found"
AA17 8002_E 4 00 0000000000000000000000 "USB/DEP: Not enough memory available"
AA17 8003_E 4 00 0000000000000000000000 "USB/DEP: It was no endpoint found in the descriptor"
AA17 8004_E 4 00 0000000000000000000000 "USB/DEP: The creation of the list of USB devices failed"
AA17 FE09_E 4 00 0000000000000000000000 "USB/DEP: USB read command could not be executed in the
specified monitoring time"
AA17 FE0A_E 4 00 0000000000000000000000 "USB/DEP: USB READ command is cancelled by the user"
AA17 FE89_E 4 00 0000000000000000000000 "USB/DEP: The pointer pData is illegal"
AA17 FE9C_E 4 00 0000000000000000000000 "USB/DEP: The length in DataSize is 0 (zero)"
AA17 0001_E 4 00 0000000000000000000000 "USB/DEP: CRC error has been detected"
AA17 0002_E 4 00 0000000000000000000000 "USB/DEP: Bit stuffing error has been detected"
AA17 0003_E 4 00 0000000000000000000000 "USB/DEP: DATA toggle mismatch has been detected"
AA17 0004_E 4 00 0000000000000000000000 "USB/DEP: STALLPID has been detected, error is reported by the
USB host controller"
AA17 0005_E 4 00 0000000000000000000000 "USB/DEP: USB device is not responding, error is reported by the
USB host"
AA17 0006_E 4 00 0000000000000000000000 "USB/DEP: PID check has failed, error is reported by the USB host
controller"
AA17 0007_E 4 00 0000000000000000000000 "USB/DEP: Unexpected PID detected, error is reported by the USB
host"
AA17 0008_E 4 00 0000000000000000000000 "USB/DEP: Data overrun error detected, error is reported by the
USB host"
AA17 0009_E 4 00 0000000000000000000000 "USB/DEP: Data underrun error detected, error is reported by the
USB host"
AA17 000A_E 4 00 0000000000000000000000 "USB/DEP: Error code is reserved by the USB host controller driver"
AA17 000B_E 4 00 0000000000000000000000 "USB/DEP: Error code is reserved by the USB host controller driver"
AA17 000C_E 4 00 0000000000000000000000 "USB/DEP: Buffer overrun has been detected, error is reported by
the USB host"
AA17 000D_E 4 00 0000000000000000000000 "USB/DEP: Buffer underrun has been detected, error is reported by
the USB host"
AA17 000F_E 4 00 0000000000000000000000 "USB/DEP: Buffer was not accessed, error is reported by the USB
host"
AA17 0010_E 4 00 0000000000000000000000 "USB/DEP: FIFO error has been detected, PCI bus latency was too
long"
AA17 0011_E 4 00 0000000000000000000000 "USB/DEP: XACT error has been detected, error is reported by the
USB host"

U25604-J-Z745-1-7600 May 2011 63

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
AA17 0012_E 4 00 0000000000000000000000 "USB/DEP: Device is babbling, data transfer phase exceeds the
USB frame length"
AA17 0013_E 4 00 0000000000000000000000 "USB/DEP: Data buffer error has been detected, error is reported by
the USB host"
AA17 0030_E 4 00 0000000000000000000000 "USB/DEP: Endpoint has been halted by the USB bus driver USBD"
AA17 0100_E 4 00 0000000000000000000000 "USB/DEP: Memory allocation attempt has failed, error is reported
by the USB bus"
AA17 0200_E 4 00 0000000000000000000000 "USB/DEP: Invalid URB function code has been passed, error is
reported by the USB"
AA17 0300_E 4 00 0000000000000000000000 "USB/DEP: Invalid parameter has been passed, error is reported by
the USB bus"
AA17 0400_E 4 00 0000000000000000000000 "USB/DEP: There are data transfer requests pending for the device"
AA17 0500_E 4 00 0000000000000000000000 "USB/DEP: Request has failed, error is reported by the USB bus
driver USBD"
AA17 0600_E 4 00 0000000000000000000000 "USB/DEP: Invalid pipe handle has been passed, error is reported
by the USB bus"
AA17 0700_E 4 00 0000000000000000000000 "USB/DEP: There is not enough bandwidth available, error is
reported by the USB bus"
AA17 0800_E 4 00 0000000000000000000000 "USB/DEP: Internal host controller error has been detected"
AA17 0900_E 4 00 0000000000000000000000 "USB/DEP: Short transfer has been detected, error is reported by
the USB bus"
AA17 0A00_E 4 00 0000000000000000000000 "USB/DEP: Bad start frame has been specified, error is reported by
the USB bus"
AA17 0B00_E 4 00 0000000000000000000000 "USB/DEP: Asynchronous request has failed, error is reported by
the USB bus driver"
AA17 0C00_E 4 00 0000000000000000000000 "USB/DEP: USB frame control is currently owned, error is reported
by the USB bus"
AA17 0D00_E 4 00 0000000000000000000000 "USB/DEP: USB frame control is currently not owned, error is
reported by the USB"
AA17 0E00_E 4 00 0000000000000000000000 "USB/DEP: Operation is not supported, error is reported by the USB
bus driver"
AA17 0F00_E 4 00 0000000000000000000000 "USB/DEP: Invalid configuration descriptor was reported by the
device"
AA17 1000_E 4 00 0000000000000000000000 "USB/DEP: Operation has failed, error is reported by the USBIO
driver"
AA17 1001_E 4 00 0000000000000000000000 "USB/DEP: Invalid input buffer has been passed to an IOCTL
operation"
AA17 1002_E 4 00 0000000000000000000000 "USB/DEP: Invalid output buffer has been passed to an IOCTL
operation"
AA17 1003_E 4 00 0000000000000000000000 "USB/DEP: There is not enough system memory available to
complete the operation"
AA17 1004_E 4 00 0000000000000000000000 "USB/DEP: There are read or write requests pending, error is
reported by the USBIO"
AA17 1005_E 4 00 0000000000000000000000 "USB/DEP: USB device is already configured, error is reported by
the USBIO"
AA17 1006_E 4 00 0000000000000000000000 "USB/DEP: The USB device is not configured, error is reported by
the USBIO driver"
AA17 1007_E 4 00 0000000000000000000000 "USB/DEP: There are open pipes, error is reported by the USBIO
driver"
AA17 1008_E 4 00 0000000000000000000000 "USB/DEP: Either the handle is already bound to a pipe"
AA17 1009_E 4 00 0000000000000000000000 "USB/DEP: Handle is not bound to a pipe, error is reported by the
USBIO driver"
AA17 100A_E 4 00 0000000000000000000000 "USB/DEP: USB device has been removed from the system"
AA17 100B_E 4 00 0000000000000000000000 "USB/DEP: Specified control code is not supported"
AA17 100C_E 4 00 0000000000000000000000 "USB/DEP: Operation has been timed out, error is reported by the
USBIO driver"
AA17 100D_E 4 00 0000000000000000000000 "USB/DEP: Invalid recipient has been specified"
AA17 100E_E 4 00 0000000000000000000000 "USB/DEP: Either an invalid request type has been specified"
AA17 100F_E 4 00 0000000000000000000000 "USB/DEP: Invalid IOCTL code has been specified, error is reported
by the USBIO"
AA17 1010_E 4 00 0000000000000000000000 "USB/DEP: Direction of the data transfer request is not supported by
that pipe"
AA17 1011_E 4 00 0000000000000000000000 "USB/DEP: Number of asynchronous data packets specified in an
asynchronous read"
AA17 1012_E 4 00 0000000000000000000000 "USB/DEP: Memory resources are exhausted. This error is reported
by the USBIO driver"
AA17 1013_E 4 00 0000000000000000000000 "USB/DEP: The specified pipe was not found in the current configu-
ration"

64 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
AA17 1014_E 4 00 0000000000000000000000 "USB/DEP: An invalid asynchronous data packet has been
specified"
AA17 1015_E 4 00 0000000000000000000000 "USB/DEP: There are not enough system resources to complete the
operation"
AA17 1016_E 4 00 0000000000000000000000 "USB/DEP: Specified interface was not found in the current configu-
ration"
AA17 1017_E 4 00 0000000000000000000000 "USB/DEP: Operation cannot be executed while the USB device is
in the current state"
AA17 1018_E 4 00 0000000000000000000000 "USB/DEP: Invalid parameter has been specified with an IOCTL
operation"
AA17 1019_E 4 00 0000000000000000000000 "USB/DEP: Evaluation interval of the USBIO DEMO version has
expired"
AA17 101A_E 4 00 0000000000000000000000 "USB/DEP: Invalid power state has been specified"
AA17 101B_E 4 00 0000000000000000000000 "USB/DEP: Device has entered a power down state"
AA17 101C_E 4 00 0000000000000000000000 "USB/DEP: API version reported by the USBIO driver does not
match"
AA17 101D_E 4 00 0000000000000000000000 "USB/DEP: Set configuration operation has failed, error is reported
by the USBIO"
AA17 1080_E 4 00 0000000000000000000000 "USB/DEP: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA17 1081_E 4 00 0000000000000000000000 "USB/DEP: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA17 1082_E 4 00 0000000000000000000000 "USB/DEP: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA17 1083_E 4 00 0000000000000000000000 "USB/DEP: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA17 1084_E 4 00 0000000000000000000000 "USB/DEP: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA17 1085_E 4 00 0000000000000000000000 "USB/DEP: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA17 1086_E 4 00 0000000000000000000000 "USB/DEP: The operation has failed due to a restriction of the
USBIO LIGHT version"
AA17 1087_E 4 00 0000000000000000000000 "USB/DEP: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA17 1100_E 4 00 0000000000000000000000 "USB/DEP: The specified device object does not exist"
AA17 1102_E 4 00 0000000000000000000000 "USB/DEP: Device object was opened, there is no valid handle to
execute the operation"
AA17 1104_E 4 00 0000000000000000000000 "USB/DEP: Enumeration of the specified devices has failed"
AA17 1105_E 4 00 0000000000000000000000 "USB/DEP: Invalid parameter has been passed to a function"
AA17 1106_E 4 00 0000000000000000000000 "USB/DEP: Library setupapi.dll could not be loaded"
AA17 2000_E 4 00 0000000000000000000000 "USB/DEP: Set configuration request has failed"
AA17 3000_E 4 00 0000000000000000000000 "USB/DEP: Buffer is too small, error is reported by the USB bus
driver USBD"
AA17 4000_E 4 00 0000000000000000000000 "USB/DEP: Interface was not found, error is reported by the USB
bus driver USBD"
AA17 5000_E 4 00 0000000000000000000000 "USB/DEP: Invalid pipe flags have been specified"
AA17 6000_E 4 00 0000000000000000000000 "USB/DEP: Operation has been timed out, error is reported by the
USB bus driver"
AA17 7000_E 4 00 0000000000000000000000 "USB/DEP: USB device is gone, error is reported by the USB bus
driver USBD"

U25604-J-Z745-1-7600 May 2011 65

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Vandal Guard (Class: 0015)

The following table lists the M-Status and M-Data codes assigned to the device
class Vandal Guard (Panel Protection Door (PPD)). This device is used in
CSC450 ATM’s only.

Table 12: Vandal Guard (Class: 0015)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0015 DEFA_W 2 00 0000 "VANDAL GUARD: DEFAULT_WARNING"
0015 DEFA_E 4 00 0000 "VANDAL GUARD: DEFAULT_ERROR"
0015 8000_E 2 03 0100 "VANDAL GUARD: Unknown internal error has occurred in FW"
0015 8020_E 2 03 0100 "VANDAL GUARD: Block ID wrong"
0015 8021_E 2 03 0100 "VANDAL GUARD: Device number wrong"
0015 8022_E 2 03 0100 "VANDAL GUARD: Job specification wrong"
0015 8023_E 2 03 0100 "VANDAL GUARD: Job longer than receive buffer"
0015 8024_E 2 03 0100 "VANDAL GUARD: Syntax error in job specification"
0015 8030_E 2 03 0100 "VANDAL GUARD: No motion messages when door is opened"
0015 8040_E 2 03 0100 "VANDAL GUARD: The hardware error cannot be specified closer"
0015 8041_E 2 03 0100 "VANDAL GUARD: E-PROM faulty"
0015 8043_E 2 03 0100 "VANDAL GUARD: Processor faulty"
0015 8044_E 2 03 0100 "VANDAL GUARD: Checksum error in hardware RAM"
0015 8050_E 2 02 0201 "VANDAL GUARD: The door could not be fully opened"
0015 8051_E 2 01 0100 "VANDAL GUARD: Door cannot be closed completely"
0015 8052_E 2 03 0100 "VANDAL GUARD: Contact bar without function"
0015 8053_E 2 03 0100 "VANDAL GUARD: Light barrier is dirty or faulty"
0015 8054_E 2 03 0100 "VANDAL GUARD: Door is difficult to operate"
0015 8055_E 2 03 0100 "VANDAL GUARD: Firmware not loaded or started"
0015 80E0_E 2 03 0100 "VANDAL GUARD: Charaters 1-3 not equal to decimal digits"
0015 80E1_E 2 03 0100 "VANDAL GUARD: Block length not in valid area (3-250)"
0015 80E2_E 2 03 0100 "VANDAL GUARD: Block length not equal to received block length"
0015 80E3_E 2 03 0100 "VANDAL GUARD: Invalid Block ID (N,E)"
0015 80E4_E 2 03 0100 "VANDAL GUARD: Invalid Device ID"
0015 80E5_E 2 03 0100 "VANDAL GUARD: Invalid Job ID"
0015 80E6_E 2 03 0100 "VANDAL GUARD: Invalid Job parameter"
0015 80E7_E 2 03 0100 "VANDAL GUARD: The last command has not been processed yet"
0015 80E8_E 2 03 0100 "VANDAL GUARD: Firmware not loaded or started"
0015 80E9_E 2 03 0100 "VANDAL GUARD: Wrong file length"
0015 80EA_E 2 03 0100 "VANDAL GUARD: Memory for program module too small"
0015 80EB_E 2 03 0100 "VANDAL GUARD: Invalid file check charater"
0015 80EC_E 2 03 0100 "VANDAL GUARD: Hardware not functioning/faulty"
0015 8101_E 2 03 0100 "VANDAL GUARD: OS/2 reports error during memory request"
0015 8102_E 2 03 0100 "VANDAL GUARD: Wrong/undefined charater job acknowledgment"
0015 8103_E 2 03 0100 "VANDAL GUARD: Invalid data in response from peripheral controller"
0015 8104_E 2 03 0100 "VANDAL GUARD: Invalid MODSEG ID in FRM file on the system"
0015 8105_E 2 03 0100 "VANDAL GUARD: The file *CTF was not found"
0015 8106_E 2 03 0100 "VANDAL GUARD: The file *FRM was not found"
0015 8107_E 2 03 0100 "VANDAL GUARD: Error when opening a *CTF file"
0015 8108_E 2 03 0100 "VANDAL GUARD: Error when opening a *FRM file"
0015 8109_E 2 03 0100 "VANDAL GUARD: Invalid data in the *CTF file"

66 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Motorized Door (Class: 000E)

The following table lists the M-Status and M-Data codes assigned to the device
class Motorized Door. This device is used in CSC250/550 old series ATM’s only.

Table 13: Motorized Door (Class: 000E)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
000E DEFA_W 2 09 00000000000000000000 "DOOR MODULE: DEFAULT_WARNING"
000E DEFA_E 4 09 00000000000000000000 "DOOR MODULE: DEFAULT_ERROR"
000E 8020_E 2 09 00000000000000000000 "DOOR MODULE: Block ID wrong"
000E 8021_E 2 09 00000000000000000000 "DOOR MODULE: Device number wrong"
000E 8022_E 2 09 00000000000000000000 "DOOR MODULE: Job specification wrong"
000E 8023_E 2 09 00000000000000000000 "DOOR MODULE: Return buffer too small"
000E 8024_E 2 09 00000000000000000000 "DOOR MODULE: Syntax error in job specification"
000E 8025_E 2 09 00000000000000000000 "DOOR MODULE: The last command has not been processed yet"
000E 8030_E 2 09 00000000000000000000 "DOOR MODULE: The door could not be fully opened"
000E 8031_E 2 09 00000000000000000000 "DOOR MODULE: Door cannot be closed completely Door is blocked"
000E 8040_E 2 09 00000000000000000000 "DOOR MODULE: The hardware error cannot be specified closer"
000E 8041_E 2 09 00000000000000000000 "DOOR MODULE: E-PROM faulty"
000E 8042_E 2 09 00000000000000000000 "DOOR MODULE: EE-PROM faulty"
000E 8043_E 2 09 00000000000000000000 "DOOR MODULE: Processor faulty"
000E 8045_E 2 09 00000000000000000000 "DOOR MODULE: One or more light barriers are dirty or faulty"
000E 8046_E 2 09 00000000000000000000 "DOOR MODULE: Door open/close issued more than 3 times quickly"
000E 8050_E 2 09 00000000000000000000 "DOOR MODULE: Values of a number of photosensors are below the
minimum value"
000E 8051_E 2 09 00000000000000000000 "DOOR MODULE: The light bulb in the cash output tray is defective"
000E 8052_E 2 09 00000000000000000000 "DOOR MODULE: Door does not reach the open end position when
opened"
000E 8100_E 2 09 00000000000000000000 "DOOR MODULE: OS/2 report an error when requesting memory for
a data buffer"
000E 8101_E 2 09 00000000000000000000 "DOOR MODULE: The status of a non-existent light barrier was
requested"
000E 8102_E 2 09 00000000000000000000 "DOOR MODULE: The MDM hardware does not respond at OPEN"
000E 8FFF_E 2 09 00000000000000000000 "DOOR MODULE: Internal error"

Coin Out module (Class: 0021)

The following table lists the M-Status and M-Data codes assigned to the coin in
device class.

Table 14: Coin Out module (Class: 0021)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0021 DEFA_E 2 08 00000000 "COINOUT: Default error"
0021 DEFA_W 2 08 00000000 "COINOUT: Default warning"
0021 8001_E 2 08 00000000 "COINOUT: There are no coins inside the hopper."
0021 8002_E 2 08 00000000 "COINOUT: The hopper does not work properly."
0021 8003_E 2 08 00000000 "COINOUT: Power supply failure with recovery."
0021 8004_E 2 08 00000000 "COINOUT: Power supply failure without recovery."
0021 8005_E 2 08 00000000 "COINOUT: Reset with recovery."

U25604-J-Z745-1-7600 May 2011 67

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
0021 8006_E 2 08 00000000 "COINOUT: Reset without recovery."
0021 8007_E 2 08 00000000 "COINOUT: Hopper not installed, the hopper was not connected
correctly."
0021 8008_E 2 08 00000000 "COINOUT: The motor of the hopper is blocked."
0021 8009_E 2 08 00000000 "COINOUT: Photosensor failure, the photosensor does not work
properly."
0021 800A_E 2 08 00000000 "COINOUT: The hopper is not connected, the wire is broken or the
motor does not work."
0021 801F_E 2 08 00000000 "COINOUT: Invalid parameters. The parameters of a command are
out of range."
0021 8081_E 2 08 00000000 "COINOUT: Coin exit has been detected over a period of time."
0021 8082_E 2 08 00000000 "COINOUT: Coin exit has been detected within the payout unit or shut
down."
0021 8084_E 2 08 00000000 "COINOUT: A number of intervals superior to the pre-set maximum."
0021 80FF_E 2 08 00000000 "COINOUT: The hopper is not configured via registry."
0021 8100_E 2 08 00000000 "COINOUT: The total protocol monitoring time during transmission
has been exceeded."
0021 8101_E 2 08 00000000 "COINOUT: The total protocol monitoring time during receive has
been exceeded."
0021 8102_E 2 08 00000000 "COINOUT: The received acknowledge type is invalid."
0021 8103_E 2 08 00000000 "COINOUT: The maximum number of repeat transmissions has been
reached."
0021 8104_E 2 08 00000000 "COINOUT: The maximum number of receive repeats has been
reached."
0021 8105_E 2 08 00000000 "COINOUT: The number of coins per hopper to be paid out is invalid."
0021 8106_E 2 08 00000000 "COINOUT: The low-level switch is set before a pay-out command."
0021 8107_E 2 08 00000000 "COINOUT: Wrong value for LED, LED_FLASH or LED_FREQ in
Registry."
0021 8108_E 2 08 00000000 "COINOUT: The number of requested coins is different from the
number of dispensed coins."
0021 8109_E 2 08 00000000 "COINOUT: The number of requested coin-rollers is unequal to the
number of disbursed coin-rollers."
0021 810A_E 2 08 00000000 "COINOUT: The number of rolls to be paid out is invalid."
0021 9000_E 2 08 00000000 "COINOUT: An error occurred when accessing the SEL DH to switch
the LEDs."

Coin In module (Class: 0022)

The following table lists the M-Status and M-Data codes assigned to the coin in
device class.

Table 15: Coin In module (Class: 0022)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0022 DEFA_E 2 00 0000000000000000000000 "COININ: Default error coin in"
0022 DEFA_W 2 00 0000000000000000000000 "COININ: Default warning coin in"
0022 1420_E 4 00 0000000000000000000000 "COININ: Communication problem"
0022 8001_E 2 00 0000000000000000000000 "COININ: REIS module, the coin disk is jammed"
0022 8002_E 2 00 0000000000000000000000 "COININ: REIS module, there is a jam at the counter section
detected"
0022 8003_E 2 00 0000000000000000000000 "COININ: REIS module, the main storage is missing"
0022 8004_E 2 00 0000000000000000000000 "COININ: REIS module, voltage is too low"
0022 8005_E 2 00 0000000000000000000000 "COININ: REIS module, there is an error at the real time clock
detected"
0022 8006_E 2 00 0000000000000000000000 "COININ: REIS module, 8 volt and/or 24 volt has been interrupted
or not present"
0022 8008_E 2 00 0000000000000000000000 "COININ: REIS module, general error while the device coin recog-
nition"
0022 800A_E 2 00 0000000000000000000000 "COININ: REIS module, error while the coin transaction is executed
(calibrate error)"

68 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
0022 800B_E 2 00 0000000000000000000000 "COININ: REIS module, error while the device is teaching (calibrate
error)"
0022 800C_E 2 00 0000000000000000000000 "COININ: REIS module, the flap at the intermediate storage is
jammed"
0022 800D_E 2 00 0000000000000000000000 "COININ: REIS module, the flap at the main storage is jammed"
0022 800E_E 2 00 0000000000000000000000 "COININ: REIS module, the coin funnel is not in the right position"
0022 800F_E 2 00 0000000000000000000000 "COININ: REIS module, internal memory error"
0022 8015_E 2 00 0000000000000000000000 "COININ: REIS module, the eject box was taken during the eject
process"
0022 8100_E 2 00 0000000000000000000000 "COININ: The total protocol monitoring time during transmission has
been exceeded"
0022 8101_E 2 00 0000000000000000000000 "COININ: The total monitoring time during receive has been
exceeded"
0022 8102_E 2 00 0000000000000000000000 "COININ: The received acknowledge type is invalid"
0022 8103_E 2 00 0000000000000000000000 "COININ: The maximum number of repeat transmission has been
reached"
0022 8104_E 2 00 0000000000000000000000 "COININ: The maximum number of receive retries has been
reached"
0022 8110_E 2 00 0000000000000000000000 "COININ: NOVOTECH, The memory needed for formatting cannot
be assigned"
0022 8200_E 2 00 0000000000000000000000 "COININ: NOVOTECH, The command can currently not be
executed"
0022 8201_E 2 00 0000000000000000000000 "COININ: NOVOTECH, the device control on the system cannot be
started"
0022 8202_E 2 00 0000000000000000000000 "COININ: NOVOTECH, no connection to the device control on the
system"
0022 8203_E 2 00 0000000000000000000000 "COININ: NOVOTECH, problems when terminating the device
control"
0022 8204_E 2 00 0000000000000000000000 "COININ: NOVOTECH, monitoring time during transmission has
been exceeded"
0022 8205_E 2 00 0000000000000000000000 "COININ: NOVOTECH, monitoring time during receive has been
exceeded"
0022 8206_E 2 00 0000000000000000000000 "COININ: NOVOTECH, the total monitoring time for a command has
been exceeded"
0022 8207_E 2 00 0000000000000000000000 "COININ: The maximum number of receive retries has been
reached"
0022 8208_E 2 00 0000000000000000000000 "COININ: NOVOTECH, An ongoing transaction was terminated
abnormally"
0022 8300_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, problem when opening or closing
the lock"
0022 8301_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, the device door is open"
0022 8302_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, the optical coin check is dirty"
0022 8303_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, error after device init"
0022 8304_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, hardware defect of escrow"
0022 8305_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, main storage (filling bags) are full"
0022 8306_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, left or right conveyor not logged on"
0022 8307_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, device error"
0022 8308_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, the conveyor can not be logged on"
0022 8309_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, configuration error"
0022 830A_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, unexpected reset of the CPU and/
or reset of HW counts"
0022 8400_E 2 00 0000000000000000000000 "COININ: NOVOTECH, wrong value for LEDx, LEDx_FLASH or
LEDx_FREQ in registry"
0022 8401_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Right-hand conveyor unit blocked."
0022 8404_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Foreign matter detected"
0022 8405_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Counting problem. Shutter time-
out."
0022 8407_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Counting problem could not be
automatically corrected."
0022 8408_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Internal software error."
0022 8409_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Exchange left conveyor. Maximum
service life reached."
0022 840A_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Exchange right conveyor.
Maximum service life reached."
0022 840B_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Return buffer error! Deposit
command rejected/failed."
0022 840C_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Coin return error!"

U25604-J-Z745-1-7600 May 2011 69

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
0022 840D_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Device initialization failed!"
0022 840E_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Hardware reset of the main CPU
during counting."
0022 840F_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Hardware reset. Main CPU reset
after counting."
0022 8410_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Initialization of CPU_layer failed."
0022 8411_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Foreign matter; initialization of
conveyor (units) failed."
0022 8412_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Return buffer initialization failed!"
0022 8413_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Communication error while
counting."
0022 8414_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Communication error while
counting."
0022 8415_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Communication error during return
buffer manipulation"
0022 8416_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Communication error during return
buffer manipulation."
0022 8417_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Communication error in idle
condition."
0022 8418_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Payment cannot be aborted!
Command failed at abort!"
0022 8419_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Payment cannot be aborted.
Command failed at abort."
0022 841A_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Payment cannot be aborted while
return buffer moves."
0022 841C_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Cashbox administration error."
0022 841D_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Error when writing to the conveyor
EEPROM"
0022 841E_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Error during configuration!"
0022 841F_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Dirty or covered coin slot photo-
sensor."
0022 8420_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Dirty or covered filling level photo-
sensor."
0022 8421_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Foreign-matter detection enabled in
idle condition."
0022 8422_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Dirtying of left-hand coin check unit
detected in idle condition."
0022 8423_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Dirtying of right-hand coin check
unit detected in idle condition."
0022 8424_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Dirtying of both coin check units
detected in idle condition."
0022 8425_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Dirtying of left-hand coin check unit
detected."
0022 8426_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Dirtying of right-hand coin check
unit detected."
0022 8427_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Dirtying of both coin check units
detected."
0022 8428_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Stray coin missing at checking
position."
0022 8429_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Eject error monitoring."
0022 842A_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Unexpected return buffer error -
Coins in escrow."
0022 842B_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Return buffer dirt below warning
threshold!"
0022 842C_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Return buffer error!"
0022 842D_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Escrow emptying. The photosensor
in the escrow is not clear."
0022 842E_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Coin on safety plate !"
0022 842F_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, CPU board initialization (during
error handling) failed. "
0022 8430_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Height/width checking triggered.
Automatic emptying of the coin module failed"
0022 8431_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Error when opening/closing the
coin module. Failure to open/close the coin"
0022 8432_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Error when opening/closing the
shutter!"
0022 8433_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Error during return buffer handling!"

70 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
0022 8434_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, CoinEngine not okay, will not start,
will not respond."
0022 8500_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Timeout during loading the board
software"
0022 8501_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Error during loading the board
software"
0022 8502_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Loading of board software is not
possible"
0022 8503_E 2 00 0000000000000000000000 "COININ: NOVOTECH module, Loading of board software is not
possible"
0022 9000_E 2 00 0000000000000000000000 "COININ: NOVOTECH, Error occurred accessing the LED's during
coin input/output"

P6 (P36) (Class: 0027)

The following table lists the M-Status and M-Data codes assigned to the P6
class.

Table 16: P6 (P36) (Class: 0027)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0027 DEFA_E 2 00 0000000000000000000000 "P36: Default error"
0027 8000_E 2 00 0000000000000000000000 "P36: Thread which receives signature data could not started"
0027 8001_E 2 00 0000000000000000000000 "P36: Thread which receives signature data could not stopped"
0027 8002_E 2 00 0000000000000000000000 "P36: Pointer pP36SigPara is illegal"
0027 F000_E 2 00 0000000000000000000000 "P36: Received signature data (BIM hardware -> PC) has a
checksum error"
0027 F001_E 2 00 0000000000000000000000 "P36: Received signature data is invalid (no StopID and StartID)"
0027 FFFE_E 2 00 0000000000000000000000 "P36: Received signature data has a overflow error"
0027 FFFF_E 2 00 0000000000000000000000 "P36: Received signature data (internal BIM -> hardware) has a
checksum error"

Printer (Class: 0032)

The following table lists the M-Status and M-Data codes assigned to printer
class 0032.

Table 17: Printer (Class: 0032)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0032 DEFA_W 2 00 00000000 "PRINTER: DEFAULT_WARNING"
0032 DEFA_E 4 00 00000000 "PRINTER: DEFAULT_ERROR"
0032 1420_E 4 08 40000800 "PRINTER: Communication problem"
0032 1424_E 2 00 00000000 "PRINTER: The device is currently locked by another user"
0032 8001_E 2 00 00000000 "PRINTER: If no error found"
0032 8002_E 2 00 00000000 "PRINTER: If no error found"
0032 8003_E 2 08 40000800 "PRINTER: Printer control code file could not be opened"
0032 8004_E 2 00 00000000 "PRINTER: Bad format of the printer control code file"
0032 8005_E 2 00 00000000 "PRINTER: Invalid format of the macro"
0032 8006_E 2 00 00000000 "PRINTER: The format file is not available"
0032 8007_E 2 08 20000800 "PRINTER: OPEN error of the format file"
0032 8008_E 2 00 00000000 "PRINTER: Bad format of the format file"

U25604-J-Z745-1-7600 May 2011 71

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
0032 8009_E 2 00 00000000 "PRINTER: Error while transmitting the status buffer"
0032 800A_E 2 00 00000000 "PRINTER: The print buffer is too small"
0032 800B_E 2 00 00000000 "PRINTER: No text from the FMT file was found"
0032 800C_E 2 00 00000000 "PRINTER: If no error found"
0032 800D_E 2 00 00000000 "PRINTER: If no error found"
0032 800E_E 2 00 00000000 "PRINTER: If no error found"
0032 800F_E 2 00 00000000 "PRINTER: Formatting error"
0032 8010_E 2 00 00000000 "PRINTER: If no error found"
0032 8011_E 2 00 00000000 "PRINTER: The printer-specific DLL could not be opened"
0032 8012_E 2 00 00000000 "PRINTER: If no error found"
0032 8013_E 2 00 00000000 "PRINTER: Unknown string format specification"
0032 8014_E 2 00 00000000 "PRINTER: If no error found"
0032 8015_E 2 00 00000000 "PRINTER: If no error found"

Printer ND71/74/98/9A/9C/9E/TH30 (Class: 0033)

The following table lists the M-Status and M-Data assigned to printer class
0033.

Table 18: Printer (Class: 0033)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0033 DEFA_W 2 00 00000000 "JRN/REC: DEFAULT_WARNING"
0033 DEFA_E 4 00 00000000 "JRN/REC: DEFAULT_ERROR"
0033 0001_W 2 08 40000800 "JRN/REC: Communication problem"
0033 0001_E 2 00 02000000 "JRN/REC: Receipt paper low warning"
0033 0002_E 2 00 02000000 "JRN/REC: Journal paper low warning"
0033 0003_E 2 16 00000002 "JRN/REC: Receipt still in output at OPEN on printer"
0033 1017_E 4 08 40000800 "JRN/REC: Communication problem"
0033 1420_E 4 08 40000800 "JRN/REC: Communication problem"
0033 8005_E 2 00 00000000 "JRN/REC: Wrong macro format"
0033 8009_E 2 08 40000800 "JRN/REC: Printer hardware error"
0033 8100_E 2 08 40000800 "JRN/REC: Printer hardware error"
0033 8101_E 2 08 40000800 "JRN/REC: Loss of command after device error"
0033 8102_E 2 08 40000800 "JRN/REC: Hardware error in memory test (RAM and ROM)"
0033 8103_E 2 00 00000000 "JRN/REC: Syntax error in the ESCAPE sequence"
0033 8104_E 2 08 40000800 "JRN/REC: Parity error"
0033 8105_E 2 08 40000800 "JRN/REC: A checksum error is set"
0033 8106_E 2 08 40000800 "JRN/REC: Short-term power failed"
0033 8107_E 2 05 08000000 "JRN/REC: Paper-out condition or paper jam"
0033 8108_E 4 05 08000000 "JRN/REC: Loss of command after receipt paper end"
0033 8109_E 4 07 40000002 "JRN/REC: Receipt paper jam"
0033 810A_E 2 07 40000002 "JRN/REC: Loss of command after paper jam"
0033 810B_E 2 05 08000000 "JRN/REC: Paper-out condition or paper jam"
0033 810C_E 4 05 08000000 "JRN/REC: Loss of command after receipt paper end"
0033 810D_E 2 07 40000000 "JRN/REC: Journal paper tear"
0033 810E_E 2 07 40000000 "JRN/REC: Loss of command after receipt paper end"
0033 810F_E 2 08 40000800 "JRN/REC: The door is not properly closed"
0033 8110_E 2 08 40000800 "JRN/REC: Loss of command because of open CSC door"
0033 8111_E 2 08 40000800 "JRN/REC: Printer hardware error"
0033 8112_E 2 03 40000004 "JRN/REC: Black dot mark not found"
0033 8201_E 2 08 40000800 "JRN/REC: Cannot open control file ND9X.INI"

72 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
0033 8202_E 2 08 40000800 "JRN/REC: Cannot read control file ND9X.INI"
0033 8203_E 2 08 40000800 "JRN/REC: Cannot open a file or checksum incorrect"
0033 8204_E 2 08 40000800 "JRN/REC: Cannot read the file to be loaded"
0033 8205_E 2 08 40000800 "JRN/REC: File to be loaded has invalid module id"
0033 8206_E 2 08 40000800 "JRN/REC: Expected response from firmware loader is incorrect"
0033 8207_E 2 08 40000800 "JRN/REC: Invalid logo type for ND9C"
0033 8208_E 2 08 40000800 "JRN/REC: Loaded file does not fit to printer hardware"
0033 FE08_E 4 08 40000800 "JRN/REC: V24 Communication timeout"
0033 FE09_E 4 08 40000800 "JRN/REC: V24 Communication timeout"

Printer ND75/75S/94 (Class: 0034)

The following table lists the M-Status and M-Data codes assigned to printer
class 0034.

Table 19: Printer (Class: 0034)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0034 DEFA_W 2 00 0000000000000000 "ND94: DEFAULT_WARNING"
0034 DEFA_E 4 00 0000000000000000 "ND94: DEFAULT_ERROR"
0034 0001_E 2 00 0200000000000000 "ND94: Paper-low condition"
0034 0002_E 2 00 0200000000000000 "ND94: Weekend limit reached"
0034 0003_E 2 00 4000000000000000 "ND94: FF command caused a feed to 1st line of 10th document"
0034 0004_E 2 00 4000000000000000 "ND94: The set limit for the reject box has been exceeded"
0034 8100_E 2 02 4000000000000000 "ND94: Error in the low-voltage power supply"
0034 8101_E 2 02 4000000000000000 "ND94: The carrier was moved manually"
0034 8102_E 2 02 4000000000000000 "ND94: Error in memory test(RAM and ROM)"
0034 8103_E 2 07 0800000000000000 "ND94: The paper is used up completely"
0034 8104_E 2 04 0400000000000000 "ND94: Paper jam, bad/missing mark on paper"
0034 8105_E 2 02 4000080000000000 "ND94: Reset switch on the drum is faulty"
0034 8106_E 2 01 4000000100000000 "ND94: The cutter is binding"
0034 8107_E 2 05 4000010000000000 "ND94: Paper jam in paper path"
0034 8108_E 2 00 4000000000000000 "ND94: FF command caused a feed to 1st line of 10th document"
0034 8109_E 2 05 4000010000000000 "ND94: Receipt(s) not removed before issuing a new print job"
0034 810A_E 2 00 4000000000000000 "ND94: Access to a non-existent font module"
0034 810B_E 2 05 4000010000000000 "ND94: Forms in gripper after 2 reject attempts"
0034 810C_E 2 00 4000000000000000 "ND94: External light when adjusting photosensor"
0034 810D_E 2 01 4000100000000000 "ND94: Rocker does not return to home position after cutting"
0034 810E_E 2 00 4000000000000000 "ND94: Remove stacker door does not open"
0034 810F_E 2 02 4000400000000000 "ND94: Cheque counter in Backup RAM deleted"
0034 8110_E 2 04 4000000000000000 "ND94: Print control mark not found"
0034 8111_E 2 02 4000080000000000 "ND94: Printer hardware error"
0034 8112_E 2 02 4000080000000000 "ND94: If no error found"

U25604-J-Z745-1-7600 May 2011 73

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Printer ND79 (Class: 0035)

The following table lists the M-Status and M-Data codes assigned to printer
class 0035.

Table 20: Printer (Class: 0035)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0035 DEFA_W 2 00 0000000000000000 "ND79: DEFAULT_WARNING"
0035 DEFA_E 4 00 0000000000000000 "ND79: DEFAULT_ERROR"
0035 0001_E 2 00 0200000000000000 "ND79: Receipt paper low warning"
0035 0003_E 2 05 4000010000000000 "ND79: Still a receipt in the output chute at an OPEN"
0035 0004_E 2 00 0200000000000000 "ND79: Receipt paper low warning (last receipt printing)"
0035 8100_E 2 23 4000000000000000 "ND79: Printer hardware error"
0035 8101_E 2 02 4000000000000000 "ND79: Loss of command after device error"
0035 8103_E 2 02 4000000000000000 "ND79: Syntax error in the ESCAPE sequence for loading LOGO"
0035 8104_E 2 02 4000000000000000 "ND79: A parity error is returned from a printer"
0035 8106_E 2 23 4000000000000000 "ND79: Short-term power failed on during operation"
0035 8107_E 2 07 0800000000000000 "ND79: Paper-out condition or paper jam"
0035 8108_E 2 07 0800000000000000 "ND79: Loss of command after receipt paper end"
0035 8109_E 2 05 4000010000000000 "ND79: Receipt paper jam"
0035 810A_E 2 05 4000010000000000 "ND79: Loss of command after paper jam"
0035 8111_E 2 00 4000010000000000 "ND79: Printer hardware error"
0035 8112_E 2 00 4000010000000000 "ND79: The printer is in service position"
0035 8113_E 2 00 4000010000000000 "ND79: Defective control instruction"
0035 8114_E 2 00 4000010000000000 "ND79: Job lost while printer in service position"

Printer ND99 (Class: 0038)

The following table lists the M-Status and M-Data codes assigned to printer
class 0038.

Table 21: Printer (Class: 0038)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0038 DEFA_W 2 00 00000000 "RECEIPT: DEFAULT_WARNING"
0038 DEFA_E 4 00 00000000 "RECEIPT: DEFAULT_ERROR"
0038 0001_E 2 00 02000000 "RECEIPT: Receipt paper low warning"
0038 0002_E 2 08 40000000 "RECEIPT: API function CscPrtOpen checks FW load file SWC728HEX"
0038 0003_E 2 08 40000000 "RECEIPT: FW on disk different than SW loaded in printer"
0038 0004_E 2 08 40000000 "RECEIPT: There is no firmware loaded"
0038 0005_E 2 08 40000000 "RECEIPT: Loaded PRT FW has a release smaller than 0305"
0038 1005_E 2 08 40000800 "RECEIPT: Printer hardware error"
0038 1008_E 2 08 40000800 "RECEIPT: Printer USB communication error"
0038 1420_E 4 00 00000000 "PRINTER: Communication problem"
0038 1424_E 4 00 00000000 "PRINTER: The device is currently locked by another user"
0038 8100_E 2 03 40000004 "RECEIPT: Hardware error receipt presenter module"
0038 8101_E 2 03 40000004 "RECEIPT: Printer cannot recognize a top-of-form mark"
0038 8102_E 4 09 40000000 "RECEIPT: The print head is lifted"
0038 8103_E 2 08 00000000 "RECEIPT: Syntax error in ESCAPE sequence for loading LOGO"
0038 8104_E 2 08 00000000 "RECEIPT: A parity error is returned from a printer"
0038 8105_E 2 08 40000000 "RECEIPT: HW error occured at power ON (self-test)"
0038 8106_E 2 08 40000000 "RECEIPT: Short-term power failed on during operation"
0038 8107_E 2 05 08000000 "RECEIPT: Paper-out, current form still printed"

74 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
0038 8108_E 2 00 40000000 "RECEIPT: Non-existing user-defined character font selected"
0038 8109_E 2 08 40000000 "RECEIPT: The printer buffer is overflow"
0038 810A_E 2 08 40000000 "RECEIPT: Loss of command"
0038 810B_E 2 01 40010000 "RECEIPT: Cutter not in home position"
0038 810C_E 2 08 40000000 "RECEIPT: Syntax error in ESCAPE sequence for loading user chars."
0038 810D_E 2 08 40000000 "RECEIPT: Firmware HEX-file SWC728HEX has no valid firmware version"
0038 810E_E 2 08 40000000 "RECEIPT: Recognized a faulty firmware load file SWC728HEX"
0038 810F_E 2 08 00000000 "RECEIPT: No firmware is loaded"
0038 8110_E 2 08 40000000 "RECEIPT: Loaded PRT FW has a release smaller than 0305"
0038 FE08_E 4 08 40000000 "RECEIPT: V24 Communication timeout"
0038 FE09_E 4 08 40000000 "RECEIPT: V24 Communication timeout"
0038 FE0B_E 4 08 40000000 "RECEIPT: V24 Communication timeout"
0038 FE85_E 4 08 40000000 "RECEIPT: V24 Communication problem"

Printer ND97/TH97/TP01/NP01/TP05/NP05 (Class: 0039)

The following table lists the M-Status and M-Data codes assigned to class 0039.
Class AA39 is the CSC-W32 USB class 0003 that is assigned to the Statement
printer device.

Refer to section ”Error Class Mapping” on page 5.

Table 22: Printer (Class: 0039)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0039 DEFA_W 2 00 00000000 "ND/TH97: Default warning if no CSCW32 error found"
0039 DEFA_E 4 00 00000000 "ND/TH97: Default error if no CSCW32 error found"
0039 1006_E 2 00 00000000 "ND/TH97: Error"
0039 1427_E 1 00 00000000 "ND/TH97: Printer not accessable, occupied by another user"
0039 8100_E 2 00 00000000 "ND/TH97: Printer is not able to print graphices"
0039 8101_E 2 00 00000000 "ND/TH97: Application tries to get a monitor message, but monitor not started yet"
0039 8102_E 2 00 00000000 "ND/TH97: Application tries to start the monitor, but it is already started"
0039 8103_E 4 05 00000000 "ND/TH97: Paper jam in transport path"
0039 8104_E 2 00 00000000 "ND/TH97: Paper jam, paper skew, bad/missing mark on paper, dirty sensor"
0039 8105_E 4 00 00000000 "ND/TH97: Drum cover not locked, reset switch faulty, drive belt faulty"
0039 8106_E 4 00 00000000 "ND/TH97: The cutter is binding"
0039 8107_E 2 00 00000000 "ND/TH97: Paper jam in paper path"
0039 8108_E 1 00 00000000 "ND/TH97: Tray full, transport of more than 10 sheets attempted"
0039 8109_E 1 00 00000000 "ND/TH97: Sheets where not removed before new print job was issued"
0039 810A_E 1 00 00000000 "ND/TH97: Wrong access to a non-existent font module"
0039 810B_E 4 00 00000000 "ND/TH97: Document jam in transport path, 2 reject attempted"
0039 810C_E 1 00 00000000 "ND/TH97: External light when adjusting the photosensor"
0039 810D_E 4 00 00000000 "ND/TH97: Rocker does not return to home position after cutting"
0039 810E_E 2 00 00000000 "ND/TH97: Door is binding, stacker door open failure"
0039 8111_E 4 00 00000000 "ND/TH97: Printer hardware error"
0039 8112_E 4 00 00000000 "ND/TH97: Reject box overfilled"
0039 8113_E 4 00 00000000 "ND/TH97: Printer firmware receives an internal SW error"
0039 8120_E 4 00 00000000 "ND/TH97: Drum cover not closed"
0039 8121_E 2 00 00000000 "ND/TH97: Selected paper lane not available"
0039 8122_E 4 00 00000000 "ND/TH97: Paper empty on lane 2"
0039 8123_E 4 00 00000000 "ND/TH97: Documents not removed before issuing a new print job"

U25604-J-Z745-1-7600 May 2011 75

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
0039 8124_E 2 00 00000000 "ND/TH97: Print job in graphics mode aborted"
0039 8125_E 1 00 00000000 "ND/TH97: Internal software error during graphic print job"
0039 FE06_E 4 00 00000000 "ND/TH97: COMM port invalid protocol specification, check connection"
0039 FE08_E 4 00 00000000 "ND/TH97: V24 Communication timeout"
0039 FE09_E 4 00 00000000 "ND/TH97: V24 Communication timeout"
0039 FE0F_E 4 00 00000000 "ND/TH97: Protocol violation, device is switched off or did not answer"
0039 FE85_E 4 00 00000000 "ND/TH97: V24 Communication problem"
AA39 DEFA_W 4 00 00000000 "USB/DOCPRT: DEFAULT_WARNING"
AA39 DEFA_E 4 00 00000000 "USB/DOCPRT: DEFAULT_ERROR"
AA39 8000_E 4 00 00000000 "USB/DOCPRT: Unexpected descriptor was reported from USB device"
AA39 8001_E 4 00 00000000 "USB/DOCPRT: Device not found"
AA39 8002_E 4 00 00000000 "USB/DOCPRT: Not enough memory available"
AA39 8003_E 4 00 00000000 "USB/DOCPRT: It was no endpoint found in the descriptor"
AA39 8004_E 4 00 00000000 "USB/DOCPRT: The creation of the list of USB devices failed"
AA39 FE09_E 4 00 00000000 "USB/DOCPRT: USB read command could not be executed in the specified
monitoring time"
AA39 FE0A_E 4 00 00000000 "USB/DOCPRT: USB READ command is cancelled by the user"
AA39 FE0F_E 4 00 00000000 "USB/DOCPRT: Protocol violation, device is switched off or did not answer"
AA39 FE89_E 4 00 00000000 "USB/DOCPRT: The pointer pData is illegal"
AA39 FE9C_E 4 00 00000000 "USB/DOCPRT: The length in DataSize is 0 (zero)"
AA39 0001_E 4 00 00000000 "USB/DOCPRT: CRC error has been detected"
AA39 0002_E 4 00 00000000 "USB/DOCPRT: Bit stuffing error has been detected"
AA39 0003_E 4 00 00000000 "USB/DOCPRT: DATA toggle mismatch has been detected"
AA39 0004_E 4 00 00000000 "USB/DOCPRT: STALLPID has been detected, error is reported by the USB host
controller"
AA39 0005_E 4 00 00000000 "USB/DOCPRT: USB device is not responding, error is reported by the USB host"
AA39 0006_E 4 00 00000000 "USB/DOCPRT: PID check has failed, error is reported by the USB host controller"
AA39 0007_E 4 00 00000000 "USB/DOCPRT: Unexpected PID detected, error is reported by the USB host"
AA39 0008_E 4 00 00000000 "USB/DOCPRT: Data overrun error detected, error is reported by the USB host"
AA39 0009_E 4 00 00000000 "USB/DOCPRT: Data underrun error detected, error is reported by the USB host"
AA39 000A_E 4 00 00000000 "USB/DOCPRT: Error code is reserved by the USB host controller driver"
AA39 000B_E 4 00 00000000 "USB/DOCPRT: Error code is reserved by the USB host controller driver"
AA39 000C_E 4 00 00000000 "USB/DOCPRT: Buffer overrun has been detected, error is reported by the USB
host"
AA39 000D_E 4 00 00000000 "USB/DOCPRT: Buffer underrun has been detected, error is reported by the USB
host"
AA39 000F_E 4 00 00000000 "USB/DOCPRT: Buffer was not accessed, error is reported by the USB host"
AA39 0010_E 4 00 00000000 "USB/DOCPRT: FIFO error has been detected, PCI bus latency was too long"
AA39 0011_E 4 00 00000000 "USB/DOCPRT: XACT error has been detected, error is reported by the USB host"
AA39 0012_E 4 00 00000000 "USB/DOCPRT: Device is babbling, data transfer phase exceeds the USB frame
length"
AA39 0013_E 4 00 00000000 "USB/DOCPRT: Data buffer error has been detected, error is reported by the USB
host"
AA39 0030_E 4 00 00000000 "USB/DOCPRT: Endpoint has been halted by the USB bus driver USBD"
AA39 0100_E 4 00 00000000 "USB/DOCPRT: Memory allocation attempt has failed, error is reported by the USB
bus"
AA39 0200_E 4 00 00000000 "USB/DOCPRT: Invalid URB function code has been passed, error is reported by the
USB"
AA39 0300_E 4 00 00000000 "USB/DOCPRT: Invalid parameter has been passed, error is reported by the USB
bus"
AA39 0400_E 4 00 00000000 "USB/DOCPRT: There are data transfer requests pending for the device"
AA39 0500_E 4 00 00000000 "USB/DOCPRT: Request has failed, error is reported by the USB bus driver USBD"
AA39 0600_E 4 00 00000000 "USB/DOCPRT: Invalid pipe handle has been passed, error is reported by the USB
bus"
AA39 0700_E 4 00 00000000 "USB/DOCPRT: There is not enough bandwidth available, error is reported by the
USB bus"
AA39 0800_E 4 00 00000000 "USB/DOCPRT: Internal host controller error has been detected"
AA39 0900_E 4 00 00000000 "USB/DOCPRT: Short transfer has been detected, error is reported by the USB bus"
AA39 0A00_E 4 00 00000000 "USB/DOCPRT: Bad start frame has been specified, error is reported by the USB
bus"
AA39 0B00_E 4 00 00000000 "USB/DOCPRT: Asynchronous request has failed, error is reported by the USB bus
driver"
AA39 0C00_E 4 00 00000000 "USB/DOCPRT: USB frame control is currently owned, error is reported by the USB
bus"

76 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
AA39 0D00_E 4 00 00000000 "USB/DOCPRT: USB frame control is currently not owned, error is reported by the
USB"
AA39 0E00_E 4 00 00000000 "USB/DOCPRT: Operation is not supported, error is reported by the USB bus driver"
AA39 0F00_E 4 00 00000000 "USB/DOCPRT: Invalid configuration descriptor was reported by the device"
AA39 1000_E 4 00 00000000 "USB/DOCPRT: Operation has failed, error is reported by the USBIO driver"
AA39 1001_E 4 00 00000000 "USB/DOCPRT: Invalid input buffer has been passed to an IOCTL operation"
AA39 1002_E 4 00 00000000 "USB/DOCPRT: Invalid output buffer has been passed to an IOCTL operation"
AA39 1003_E 4 00 00000000 "USB/DOCPRT: There is not enough system memory available to complete the
operation"
AA39 1004_E 4 00 00000000 "USB/DOCPRT: There are read or write requests pending, error is reported by the
USBIO"
AA39 1005_E 4 00 00000000 "USB/DOCPRT: USB device is already configured, error is reported by the USBIO"
AA39 1006_E 4 00 00000000 "USB/DOCPRT: The USB device is not configured, error is reported by the USBIO
driver"
AA39 1007_E 4 00 00000000 "USB/DOCPRT: There are open pipes, error is reported by the USBIO driver"
AA39 1008_E 4 00 00000000 "USB/DOCPRT: Either the handle is already bound to a pipe"
AA39 1009_E 4 00 00000000 "USB/DOCPRT: Handle is not bound to a pipe, error is reported by the USBIO driver"
AA39 100A_E 4 00 00000000 "USB/DOCPRT: USB device has been removed from the system"
AA39 100B_E 4 00 00000000 "USB/DOCPRT: Specified control code is not supported"
AA39 100C_E 4 00 00000000 "USB/DOCPRT: Operation has been timed out, error is reported by the USBIO
driver"
AA39 100D_E 4 00 00000000 "USB/DOCPRT: Invalid recipient has been specified"
AA39 100E_E 4 00 00000000 "USB/DOCPRT: Either an invalid request type has been specified"
AA39 100F_E 4 00 00000000 "USB/DOCPRT: Invalid IOCTL code has been specified, error is reported by the
USBIO"
AA39 1010_E 4 00 00000000 "USB/DOCPRT: Direction of the data transfer request is not supported by that pipe"
AA39 1011_E 4 00 00000000 "USB/DOCPRT: Number of asynchronous data packets specified in an
asynchronous read"
AA39 1012_E 4 00 00000000 "USB/DOCPRT: Memory resources are exhausted. This error is reported by the
USBIO driver"
AA39 1013_E 4 00 00000000 "USB/DOCPRT: The specified pipe was not found in the current configuration"
AA39 1014_E 4 00 00000000 "USB/DOCPRT: An invalid asynchronous data packet has been specified"
AA39 1015_E 4 00 00000000 "USB/DOCPRT: There are not enough system resources to complete the operation"
AA39 1016_E 4 00 00000000 "USB/DOCPRT: Specified interface was not found in the current configuration"
AA39 1017_E 4 00 00000000 "USB/DOCPRT: Operation cannot be executed while the USB device is in the
current state"
AA39 1018_E 4 00 00000000 "USB/DOCPRT: Invalid parameter has been specified with an IOCTL operation"
AA39 1019_E 4 00 00000000 "USB/DOCPRT: Evaluation interval of the USBIO DEMO version has expired"
AA39 101A_E 4 00 00000000 "USB/DOCPRT: Invalid power state has been specified"
AA39 101B_E 4 00 00000000 "USB/DOCPRT: Device has entered a power down state"
AA39 101C_E 4 00 00000000 "USB/DOCPRT: API version reported by the USBIO driver does not match"
AA39 101D_E 4 00 00000000 "USB/DOCPRT: Set configuration operation has failed, error is reported by the
USBIO"
AA39 1080_E 4 00 00000000 "USB/DOCPRT: Operation has failed due to a restriction of the USBIO LIGHT
version"
AA39 1081_E 4 00 00000000 "USB/DOCPRT: Operation has failed due to a restriction of the USBIO LIGHT
version"
AA39 1082_E 4 00 00000000 "USB/DOCPRT: Operation has failed due to a restriction of the USBIO LIGHT
version"
AA39 1083_E 4 00 00000000 "USB/DOCPRT: Operation has failed due to a restriction of the USBIO LIGHT
version"
AA39 1084_E 4 00 00000000 "USB/DOCPRT: Operation has failed due to a restriction of the USBIO LIGHT
version"
AA39 1085_E 4 00 00000000 "USB/DOCPRT: Operation has failed due to a restriction of the USBIO LIGHT
version"
AA39 1086_E 4 00 00000000 "USB/DOCPRT: The operation has failed due to a restriction of the USBIO LIGHT
version"
AA39 1087_E 4 00 00000000 "USB/DOCPRT: Operation has failed due to a restriction of the USBIO LIGHT
version"
AA39 1100_E 4 00 00000000 "USB/DOCPRT: The specified device object does not exist"
AA39 1102_E 4 00 00000000 "USB/DOCPRT: Device object was opened, there is no valid handle to execute the
operation"
AA39 1104_E 4 00 00000000 "USB/DOCPRT: Enumeration of the specified devices has failed"
AA39 1105_E 4 00 00000000 "USB/DOCPRT: Invalid parameter has been passed to a function"
AA39 1106_E 4 00 00000000 "USB/DOCPRT: Library setupapi.dll could not be loaded"
AA39 2000_E 4 00 00000000 "USB/DOCPRT: Set configuration request has failed"

U25604-J-Z745-1-7600 May 2011 77

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
AA39 3000_E 4 00 00000000 "USB/DOCPRT: Buffer is too small, error is reported by the USB bus driver USBD"
AA39 4000_E 4 00 00000000 "USB/DOCPRT: Interface was not found, error is reported by the USB bus driver
USBD"
AA39 5000_E 4 00 00000000 "USB/DOCPRT: Invalid pipe flags have been specified"
AA39 6000_E 4 00 00000000 "USB/DOCPRT: Operation has been timed out, error is reported by the USB bus
driver"
AA39 7000_E 4 00 00000000 "USB/DOCPRT: USB device is gone, error is reported by the USB bus driver USBD"

SEAC Cheque Scanner (Class: 003D)

The following table lists the M-Status and M-Data codes assigned to class
003D.

Table 23: SEAC Cheque Scanner (Class: 003D)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
003D DEFA_E 2 01 00000000 "CHEQUE SEAC: Cheque device jammed"
003D DEFA_W 2 01 00000000 "CHEQUE SEAC: Cheque device jammed"
003D 1017_E 2 01 00000000 "CHEQUE SEAC: Too many users, check line connection and configuration"
003D 8000_E 2 01 00000000 "CHEQUE SEAC: Invalid parameter"
003D 8001_E 2 01 00000000 "CHEQUE SEAC: No document inserted"
003D 8002_E 2 01 00000000 "CHEQUE SEAC: Read called, but no MICR mode selected"
003D 8006_E 2 01 00000000 "CHEQUE SEAC: Cannot open raw file"
003D 8007_E 2 01 00000000 "CHEQUE SEAC: Error writing raw file"
003D 8008_E 2 01 00000000 "CHEQUE SEAC: The external shutter could not be opened"
003D 8009_E 2 01 00000000 "CHEQUE SEAC: The external shutter could not be closed"
003D 8100_E 2 01 00000000 "CHEQUE SEAC: The initialization of the scanner failed"
003D 8101_E 2 01 00000000 "CHEQUE SEAC: Time out by waiting of return from firmware command"
003D 8110_E 2 01 00000000 "CHEQUE SEAC: There is still a document in the scanner"
003D 8200_E 2 01 00000000 "CHEQUE SEAC: The firmware file(s) is/are invalid"
003D 8201_E 2 01 00000000 "CHEQUE SEAC: Error while loading the firmware file(s)"
003D 9001_E 2 01 00000000 "CHEQUE SEAC: Invalid options or parameter"
003D 9002_E 2 01 00000000 "CHEQUE SEAC: The document feeder is empty"
003D 9003_E 2 01 00000000 "CHEQUE SEAC: A document is still in track"
003D 9004_E 2 01 00000000 "CHEQUE SEAC: Command already active, device busy"
003D 9005_E 2 01 00000000 "CHEQUE SEAC: Scanning is disabled by the API, FW not compatible"
003D 9006_E 2 01 00000000 "CHEQUE SEAC: Feeder failed to start document"
003D 9007_E 2 01 00000000 "CHEQUE SEAC: Time-out while document transport"
003D 9008_E 2 01 00000000 "CHEQUE SEAC: The document position not permit to try a recover"
003D 900A_E 2 01 00000000 "CHEQUE SEAC: A document is stuck or lost in track.."
003D 900B_E 2 01 00000000 "CHEQUE SEAC: Time-out by waiting for codeline"
003D 900C_E 2 01 00000000 "CHEQUE SEAC: Double feed, repeat the command if necessary"
003D 900D_E 2 01 00000000 "CHEQUE SEAC: Problem writing image file"
003D 900E_E 2 01 00000000 "CHEQUE SEAC: SCSI error reported by ASPI during an interaction with the
CM3000"
003D 900F_E 2 01 00000000 "CHEQUE SEAC: Image processing callback routine reports an error"
003D 9010_E 2 01 00000000 "CHEQUE SEAC: CM3API internal error, repeat the command if necessary"
003D 9011_E 2 01 00000000 "CHEQUE SEAC: CM3API internal error, repeat the command if necessary"
003D 9012_E 2 01 00000000 "CHEQUE SEAC: Memory allocation failed"
003D 9013_E 2 01 00000000 "CHEQUE SEAC: The G4 compression routine reports an error"
003D 9014_E 2 01 00000000 "CHEQUE SEAC: Tracking errer, no image or codeline data are available"
003D 9015_E 2 01 00000000 "CHEQUE SEAC: CM3API internal error, repeat the command if necessary"
003D 9016_E 2 01 00000000 "CHEQUE SEAC: Document is too long for the selected operation"
003D 9017_E 2 01 00000000 "CHEQUE SEAC: A hardware problem is reported by the OCR read head"
003D 9018_E 2 01 00000000 "CHEQUE SEAC: An attempt was made to use a device option which is not present"
003D 9019_E 2 01 00000000 "CHEQUE SEAC: Opening or closing the external shutter failed"
003D 901A_E 2 01 00000000 "CHEQUE SEAC: Opening or closing the internal shutter failed"

78 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
003D 901B_E 2 01 00000000 "CHEQUE SEAC: Error metal detector, the document have a staple"
003D 901C_E 2 01 00000000 "CHEQUE SEAC: Ribbon cartridge is missing"
003D 901D_E 2 01 00000000 "CHEQUE SEAC: The scanner cannot process the required command"
003D 901E_E 2 01 00000000 "CHEQUE SEAC: CM3API.DLL internal error, repeat the command if necessary"
003D 90FF_E 2 01 00000000 "CHEQUE SEAC: CM3API.DLL returned undefined error, check application
program"
003D 9201_E 2 01 00000000 "CHEQUE SEAC: Illegal arguments calling IMACON.DLL"
003D 9202_E 2 01 00000000 "CHEQUE SEAC: Cannot open input file"
003D 9203_E 2 01 00000000 "CHEQUE SEAC: Error reading input"
003D 9204_E 2 01 00000000 "CHEQUE SEAC: Cannot open output file"
003D 9205_E 2 01 00000000 "CHEQUE SEAC: Error writing output file"
003D 9206_E 2 01 00000000 "CHEQUE SEAC: Not enough memory, check application program"
003D 9207_E 2 01 00000000 "CHEQUE SEAC: Image too long, check application program"
003D 9208_E 2 01 00000000 "CHEQUE SEAC: Image too large"
003D 9209_E 2 01 00000000 "CHEQUE SEAC: Image too small (<1 row)"
003D 92FF_E 2 01 00000000 "CHEQUE SEAC: IMACON.DLL returned undefined error"
003D 9300_E 2 01 00000000 "CHEQUE SEAC: Internal error while calling DQF.DLL"
003D 9301_E 2 01 00000000 "CHEQUE SEAC: Internal error while calling DQF.DLL"
003D 9302_E 2 01 00000000 "CHEQUE SEAC: Internal error while calling DQF.DLL"
003D 9303_E 2 01 00000000 "CHEQUE SEAC: Internal error while calling DQF.DLL"
003D 9304_E 2 01 00000000 "CHEQUE SEAC: Internal error while calling DQF.DLL"
003D 9305_E 2 01 00000000 "CHEQUE SEAC: Internal error while calling DQF.DLL"
003D 93FF_E 2 01 00000000 "CHEQUE SEAC: DQF.DLL returned undefined error"

Printer TH21 (Class: 003E)

The following table lists the M-Status and M-Data codes assigned to printer
class 003E.

Table 24: Printer (Class: 003E)

Error Error Sev. M-Status M-Data Status desription
Class Code INFO
003E DEFA_W 2 00 00000000 "TH21: Default warning if no CSC-W32 error found"
003E DEFA_E 2 00 00000000 "TH21: Default error if no CSC-W32 error found"
003E 0001_E 2 00 02000000 "TH21: Receipt paper low warning"
003E 8100_E 2 08 40000800 "TH21: Receipt paper empty"
003E 8101_E 0 00 00000000 "TH21: Cover is properly opened"
003E 8102_E 2 08 40000800 "TH21: Print head temperature is not ok"
003E 8103_E 2 08 40000800 "TH21: Power lost"
003E 8104_E 2 05 80000000 "TH21: Paper jam"
003E 8105_E 2 08 40000800 "TH21: The cutter is binding"
003E 8106_E 2 08 40000800 "TH21: Hardware error, error in memory test"
003E 8120_E 2 08 40000800 "TH21: Communication error with monitoring module if in use"
003E 8121_E 2 08 40000800 "TH21: No GDI driver WN_TH21 found (when monitoring facility is used)"
003E 8122_E 2 08 40000800 "TH21: Invalid COM port entry for GDI driver (when monitoring facility is
used)"
003E 8201_E 2 08 40000800 "TH21: Cannot open control file TH21.INI"
003E 8202_E 2 08 40000800 "TH21: Cannot read control file TH21.INI"
003E 8203_E 2 08 40000800 "TH21: Cannot open a file or invalid file name give up"
003E 8204_E 2 08 40000800 "TH21: Printer hardware error, cannot read the file to be loaded"
003E 8205_E 2 08 40000800 "TH21: File to be loaded has invalid module ID"
003E 8206_E 2 08 40000800 "TH21: The expected response to the FW loader is not correct"
003E 8207_E 2 08 40000800 "TH21: Invalid Logo type or logo file too big"

U25604-J-Z745-1-7600 May 2011 79

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Printer Extensions (Class: 003F)

The following table lists the M-Status and M-Data codes assigned to printer
class 003F.

Table 25: Printer (Class: 003F)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
003F DEFA_W 2 00 00000000 "PRT GDI: Default warning if no CSC-W32 error found"
003F DEFA_E 2 00 00000000 "PRT GDI: Default error if no CSC-W32 error found"
003F 1017_E 4 00 00000000 "PRT GDI: Communication problem"
003F 1420_E 4 00 00000000 "PRT GDI: Communication problem"

Printer Monitor ND9G (Class: 0040)

The following table lists the M-Status and M-Data codes assigned to printer
class 0040.

Table 26: Printer (Class: 0040)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0040 DEFA_W 2 00 00000000 "ND9G GDI: Default warning if no CSC-W32 error found"
0040 DEFA_E 2 00 00000000 "ND9G GDI: Default error if no CSC-W32 error found"
0040 0001_E 2 00 00000000 "ND9G GDI: Paper-out condition."
0040 0002_E 2 00 00000000 "ND9G GDI: Terminate applications requiring the printer."
0040 0003_E 2 00 00000000 "ND9G GDI: Receipt paper jam. Receipt could not be correctly processed."
0040 0004_E 4 00 00000000 "ND9G GDI: Hardware error: error in memory test (RAM and ROM), backup RAM
faulty."
0040 0005_E 4 00 00000000 "ND9G GDI: Printer detect unexpected data."
0040 0006_E 4 00 00000000 "ND9G GDI: A parity error is returned from the printer when faulty characters are
received."
0040 0007_E 4 00 00000000 "ND9G GDI: Loss of a command. The command was sent and could not be
correctly executed."
0040 0009_E 2 00 00000000 "ND9G GDI: By activated mark, recognition a mark is not found."
0040 000A_E 4 00 00000000 "ND9G GDI: A checksum error of the RAM is occurred."
0040 000B_E 4 00 00000000 "ND9G GDI: The loaded firmware file does not fit to the printer hardware."
0040 000D_E 4 00 00000000 "ND9G GDI: Unexpected data was received."
0040 000E_E 2 00 00000000 "ND9G GDI: A WRITE command could not be executed in the specified
monitoring time."
0040 000F_E 2 00 00000000 "ND9G GDI: A READ command could not be executed in the specified
monitoring time."
0040 0010_E 2 00 00000000 "ND9G GDI: Further control commands missing (e.g. Eject)"
0040 0011_E 2 00 00000000 "ND9G GDI: An error occurred while the required line parameters were being
set."
0040 0012_E 2 00 00000000 "ND9G GDI: An internal SW error occurred."
0040 0020_E 4 00 00000000 "ND9G GDI: Cannot open a file or checksum of a file to be loaded is not correct."
0040 0021_E 4 00 00000000 "ND9G GDI: Cannot read the firmware file to be loaded."
0040 0022_E 4 00 00000000 "ND9G GDI: Cannot read the file to be loaded."
0040 0023_E 4 00 00000000 "ND9G GDI: The expected response of the Firmware Loader is not correct."
0040 0024_E 4 00 00000000 "ND9G GDI: Firmware file data do not reach the firmware controller correctly."
0040 0025_E 4 00 00000000 "ND9G GDI: An error occurred when the print system was started from the CSC
service."
0040 0001_W 4 00 00000000 "ND9G GDI: Wrong value of entry FILE_CTR"
0040 0002_W 4 00 00000000 "ND9G GDI: No entry FILE1 found in the Registry."

80 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Printer Monitor TH21 (Class: 0041)

The following table lists the M-Status and M-Data codes assigned to printer
class 0041.

Table 27: Printer (Class: 0041)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0041 DEFA_W 2 00 00000000 "TH21 GDI: Default warning if no CSC-W32 error found"
0041 DEFA_E 2 00 00000000 "TH21 GDI: Default error if no CSC-W32 error found"
0041 0001_E 4 00 00000000 "TH21 GDI: Paper-out condition."
0041 0002_E 2 00 00000000 "TH21 GDI: The cover is properly opened."
0041 0003_E 2 00 00000000 "TH21 GDI: The print head temperature is not ok."
0041 0004_E 4 00 00000000 "TH21 GDI: Power failure during operation or insufficient power supply."
0041 0005_E 4 00 00000000 "TH21 GDI: Receipt paper jam. Receipt could not be correctly processed."
0041 0006_E 2 00 00000000 "TH21 GDI: The cutter is binding."
0041 0007_E 4 00 00000000 "TH21 GDI: Error in memory test (RAM and ROM)"
0041 0008_E 2 00 00000000 "TH21 GDI: Unexpected data was received."
0041 0009_E 2 00 00000000 "TH21 GDI: A WRITE command could not be executed in the specified
monitoring time"
0041 000A_E 2 00 00000000 "TH21 GDI: A READ command could not be executed in the specified
monitoring time"
0041 000B_E 2 00 00000000 "TH21 GDI: Further control commands missing (e.g. Eject)"
0041 000C_E 4 00 00000000 "TH21 GDI: An error occurred while the required line parameters were being
set."

Printer System Framework (Class: 0042)

The following table lists the M-Status and M-Data codes assigned to printer
class 0042.

Table 28: Printer (Class: 0042)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0042 DEFA_W 2 00 00000000 "PRT GDI: Default warning if no CSC-W32 error found"
0042 DEFA_E 2 00 00000000 "PRT GDI: Default error if no CSC-W32 error found"
0042 0001_E 2 00 00000000 "PRT GDI: Data that are passed to print system are to small"
0042 0002_E 2 00 00000000 "PRT GDI: Invalid registry parameter"
0042 0003_E 2 00 00000000 "PRT GDI: Operation not valid or not supported by printer"
0042 0004_E 2 00 00000000 "PRT GDI: Internal software error"
0042 0005_E 2 00 00000000 "PRT GDI: Function not allowed in the current context"
0042 0006_E 4 00 00000000 "PRT GDI: Communication error, write request unsuccessful"
0042 0007_E 4 00 00000000 "PRT GDI: A system error has occurred"
0042 0008_E 2 00 00000000 "PRT GDI: Unexpected parameter in system call"
0042 0009_E 4 00 00000000 "PRT GDI: Open failed"
0042 000A_E 2 00 00000000 "PRT GDI: Start of a print job failed"
0042 000B_E 2 00 00000000 "PRT GDI: A job has been despooled while another job is still in progress"
0042 000D_E 2 00 00000000 "PRT GDI: Invalid parameter used in a server function call"
0042 000E_E 2 00 00000000 "PRT GDI: Client already registered for monitoring"
0042 000F_E 2 00 00000000 "PRT GDI: The client tried to claim the device twice"
0042 0010_E 2 00 00000000 "PRT GDI: Invalid client handle used"
0042 0011_E 2 00 00000000 "PRT GDI: Client not registered for monitoring"
0042 0012_E 2 00 00000000 "PRT GDI: Start of print system server failed"
0042 0013_E 4 00 00000000 "PRT GDI: Connection failed, the printer is unknown"

U25604-J-Z745-1-7600 May 2011 81

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
0042 0014_E 2 00 00000000 "PRT GDI: Access denied, the client is not allowed to access the requested
operation"
0042 0015_E 2 00 00000000 "PRT GDI: Access denied, because another client has claimed the device for
exclusive access"
0042 0016_E 2 00 00000000 "PRT GDI: Unknown property"
0042 0017_E 2 00 00000000 "PRT GDI: The property has an invalid format"
0042 0018_E 2 00 00000000 "PRT GDI: The property value is invalid"
0042 0019_E 2 00 00000000 "PRT GDI: An invalid input string has been supplied"

82 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Printer TP07 GDI (Class: 0044)

The following table lists the M-Status and M-Data codes assigned to printer
class 0044.

Table 29: Printer (Class: 0044)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0044 DEFA_W 2 00 00000000 "TP07 GDI: DEFAULT_WARNING"
0044 DEFA_E 4 00 00000000 "TP07 GDI: DEFAULT_ERROR"
0044 0001_E 2 08 40000800 "TP07 GDI: Paper-out condition"
0044 0002_E 2 05 80000000 "TP07 GDI: Paper jam while cutting the paper"
0044 0003_E 2 00 00000000 "TP07 GDI: Black dot mark not found"
0044 0004_E 2 00 00000000 "TP07 GDI: Paper jam after cut receipt in the presenter"
0044 0005_E 2 00 00000000 "TP07 GDI: Paper jam after cut receipt after reject command."
0044 0006_E 2 00 00000000 "TP07 GDI: Receipt paper jam while printing process"
0044 0007_E 4 00 00000000 "TP07 GDI: Internal print job timeout has occurred"
0044 0008_E 4 00 00000000 "TP07 GDI: Power voltage of the printer is too high"
0044 0009_E 4 00 00000000 "TP07 GDI: Power voltage of the printer is too low"
0044 000A_E 4 00 00000000 "TP07 GDI: Temperature of the print head is too high"
0044 000B_E 4 00 00000000 "TP07 GDI: Hardware error"
0044 0010_E 4 00 00000000 "TP07 GDI: Unexpected data was received"
0044 0011_E 4 00 00000000 "TP07 GDI: A WRITE command could not be executed in the specified monitoring
time"
0044 0012_E 4 00 00000000 "TP07 GDI: A READ command could not be executed in the specified monitoring
time"
0044 0013_E 4 00 00000000 "TP07 GDI: This message may only occur when controlled print jobs are received"
0044 0015_E 2 00 00000000 "TP07 GDI: An internal SW error occurred"
0044 0016_E 4 00 00000000 "TP07 GDI: Printer is in offline state without any specific device error"

U25604-J-Z745-1-7600 May 2011 83

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Printer TP07 (Class: 0045)

The following table lists the M-Status and M-Data codes assigned to printer
class 0045.

Table 30: Printer (Class: 0045)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0045 DEFA_W 4 00 00000000 "RJ03/TP07/NP07: DEFAULT_WARNING"
0045 DEFA_E 4 00 00000000 "RJ03/TP07/NP07: DEFAULT_ERROR"
0045 0001_E 2 00 02000000 "RJ03/TP07/NP07: Receipt paper low"
0045 8100_E 4 00 00000000 "RJ03/TP07/NP07: Unexpected data was received"
0045 8101_E 4 00 00000000 "RJ03/TP07/NP07: Allocation error, not enough resources to allocate internal
memory"
0045 8102_E 4 00 00000000 "RJ03/TP07/NP07: A READ command could not be executed in the specified
monitoring time"
0045 8103_E 4 00 00000000 "RJ03/TP07/NP07: Code page not available"
0045 8104_E 4 00 00000000 "RJ03/TP07/NP07: Cannot open image file or invalid file name give up"
0045 8105_E 4 00 00000000 "RJ03/TP07/NP07: Cannot read the file to be loaded"
0045 8106_E 4 00 00000000 "RJ03/TP07/NP07: Invalid logo type"
0045 8107_E 4 00 00000000 "RJ03/TP07/NP07: Printer is in offline state without any specific device error"
0045 8108_E 4 00 00000000 "RJ03/TP07/NP07: No USB devices of the specified type available"
0045 8000_E 4 00 00000000 "RJ03/TP07/NP07: Paper-out condition"
0045 8001_E 4 00 00000000 "RJ03/TP07/NP07: Paper jam while paper cut"
0045 8002_E 4 00 00000000 "RJ03/TP07/NP07: Carrier does not found the home position"
0045 8003_E 4 00 00000000 "RJ03/TP07/NP07: Paper jam before cut"
0045 8004_E 4 00 00000000 "RJ03/TP07/NP07: Black dot mark not found"
0045 8005_E 4 00 00000000 "RJ03/TP07/NP07: Paper jam after cutting the receipt in the presenter"
0045 8006_E 4 00 00000000 "RJ03/TP07/NP07: Paper jam after cut receipt after reject command"
0045 8007_E 4 00 00000000 "RJ03/TP07/NP07: Receipt paper jam while printing"
0045 8008_E 4 00 00000000 "RJ03/TP07/NP07: Power voltage of printer is too high"
0045 8009_E 4 00 00000000 "RJ03/TP07/NP07: Power voltage of printer is too low"
0045 800A_E 4 00 00000000 "RJ03/TP07/NP07: Temperature of print head is too high"
0045 800B_E 4 00 00000000 "RJ03/TP07/NP07: Hardware error"
0045 800C_E 4 00 00000000 "RJ03/TP07/NP07: Paper is not at print starting position"

84 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Printer USB/TP07 (Class: AA45)

The following table lists the M-Status and M-Data codes assigned to printer
class AA45. This error is an internal generated error derived from the original
CSC-W32 error class 0003.

Refer to section ”Error Class Mapping” on page 5.

Table 31: Printer (Class: AA45)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
AA45 DEFA_W 2 00 00000000 "USB/TP07/NP07: DEFAULT_WARNING"
AA45 DEFA_E 4 00 00000000 "USB/TP07/NP07: DEFAULT_ERROR"
AA45 8000_E 2 08 40000800 "USB/TP07/NP07: Unexpected descriptor was reported from USB device"
AA45 8001_E 2 08 40000800 "USB/TP07/NP07: Device not found"
AA45 8002_E 2 08 40000800 "USB/TP07/NP07: Not enough memory available"
AA45 8003_E 2 08 40000800 "USB/TP07/NP07: It was no endpoint found in the descriptor"
AA45 8004_E 2 08 40000800 "USB/TP07/NP07: The creation of the list of USB devices failed"
AA45 FE09_E 2 08 40000800 "USB/TP07/NP07: USB read command could not be executed in the specified
monitoring time"
AA45 FE0A_E 2 08 40000800 "USB/TP07/NP07: USB READ command is cancelled by the user"
AA45 FE89_E 2 08 40000800 "USB/TP07/NP07: The pointer pData is illegal"
AA45 FE9C_E 2 08 40000800 "USB/TP07/NP07: The length in DataSize is 0 (zero)"
AA45 0001_E 2 08 40000800 "USB/TP07/NP07: CRC error has been detected"
AA45 0002_E 2 08 40000800 "USB/TP07/NP07: Bit stuffing error has been detected"
AA45 0003_E 2 08 40000800 "USB/TP07/NP07: DATA toggle mismatch has been detected"
AA45 0004_E 2 08 40000800 "USB/TP07/NP07: STALLPID has been detected, error is reported by the USB host
controller"
AA45 0005_E 2 08 40000800 "USB/TP07/NP07: USB device is not responding, error is reported by the USB
host"
AA45 0006_E 2 08 40000800 "USB/TP07/NP07: PID check has failed, error is reported by the USB host
controller"
AA45 0007_E 2 08 40000800 "USB/TP07/NP07: Unexpected PID detected, error is reported by the USB host"
AA45 0008_E 2 08 40000800 "USB/TP07/NP07: Data overrun error detected, error is reported by the USB host"
AA45 0009_E 2 08 40000800 "USB/TP07/NP07: Data underrun error detected, error is reported by the USB host"
AA45 000A_E 2 08 40000800 "USB/TP07/NP07: Error code is reserved by the USB host controller driver"
AA45 000B_E 2 08 40000800 "USB/TP07/NP07: Error code is reserved by the USB host controller driver"
AA45 000C_E 2 08 40000800 "USB/TP07/NP07: Buffer overrun has been detected, error is reported by the USB
host"
AA45 000D_E 2 08 40000800 "USB/TP07/NP07: Buffer underrun has been detected, error is reported by the USB
host"
AA45 000F_E 2 08 40000800 "USB/TP07/NP07: Buffer was not accessed, error is reported by the USB host"
AA45 0010_E 2 08 40000800 "USB/TP07/NP07: FIFO error has been detected, PCI bus latency was too long"
AA45 0011_E 2 08 40000800 "USB/TP07/NP07: XACT error has been detected, error is reported by the USB
host"
AA45 0012_E 2 08 40000800 "USB/TP07/NP07: Device is babbling, data transfer phase exceeds the USB frame
length"
AA45 0013_E 2 08 40000800 "USB/TP07/NP07: Data buffer error has been detected, error is reported by the
USB host"
AA45 0030_E 2 08 40000800 "USB/TP07/NP07: Endpoint has been halted by the USB bus driver USBD"
AA45 0100_E 2 08 40000800 "USB/TP07/NP07: Memory allocation attempt has failed, error is reported by the
USB bus"
AA45 0200_E 2 08 40000800 "USB/TP07/NP07: Invalid URB function code has been passed, error is reported
by the USB"
AA45 0300_E 2 08 40000800 "USB/TP07/NP07: Invalid parameter has been passed, error is reported by the
USB bus"
AA45 0400_E 2 08 40000800 "USB/TP07/NP07: There are data transfer requests pending for the device"

U25604-J-Z745-1-7600 May 2011 85

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
AA45 0500_E 2 08 40000800 "USB/TP07/NP07: Request has failed, error is reported by the USB bus driver
USBD"
AA45 0600_E 2 08 40000800 "USB/TP07/NP07: Invalid pipe handle has been passed, error is reported by the
USB bus"
AA45 0700_E 2 08 40000800 "USB/TP07/NP07: There is not enough bandwidth available, error is reported by
the USB bus"
AA45 0800_E 2 08 40000800 "USB/TP07/NP07: Internal host controller error has been detected"
AA45 0900_E 2 08 40000800 "USB/TP07/NP07: Short transfer has been detected, error is reported by the USB
bus"
AA45 0A00_E 2 08 40000800 "USB/TP07/NP07: Bad start frame has been specified, error is reported by the USB
bus"
AA45 0B00_E 2 08 40000800 "USB/TP07/NP07: Asynchronous request has failed, error is reported by the USB
bus driver"
AA45 0C00_E 2 08 40000800 "USB/TP07/NP07: USB frame control is currently owned, error is reported by the
USB bus"
AA45 0D00_E 2 08 40000800 "USB/TP07/NP07: USB frame control is currently not owned, error is reported by
the USB"
AA45 0E00_E 2 08 40000800 "USB/TP07/NP07: Operation is not supported, error is reported by the USB bus
driver"
AA45 0F00_E 2 08 40000800 "USB/TP07/NP07: Invalid configuration descriptor was reported by the device"
AA45 1000_E 2 08 40000800 "USB/TP07/NP07: Operation has failed, error is reported by the USBIO driver"
AA45 1001_E 2 08 40000800 "USB/TP07/NP07: Invalid input buffer has been passed to an IOCTL operation"
AA45 1002_E 2 08 40000800 "USB/TP07/NP07: Invalid output buffer has been passed to an IOCTL operation"
AA45 1003_E 2 08 40000800 "USB/TP07/NP07: There is not enough system memory available to complete the
operation"
AA45 1004_E 2 08 40000800 "USB/TP07/NP07: There are read or write requests pending, error is reported by
the USBIO"
AA45 1005_E 2 08 40000800 "USB/TP07/NP07: USB device is already configured, error is reported by the
USBIO"
AA45 1006_E 2 08 40000800 "USB/TP07/NP07: The USB device is not configured, error is reported by the
USBIO driver"
AA45 1007_E 2 08 40000800 "USB/TP07/NP07: There are open pipes, error is reported by the USBIO driver"
AA45 1008_E 2 08 40000800 "USB/TP07/NP07: Either the handle is already bound to a pipe"
AA45 1009_E 2 08 40000800 "USB/TP07/NP07: Handle is not bound to a pipe, error is reported by the USBIO
driver"
AA45 100A_E 2 08 40000800 "USB/TP07/NP07: USB device has been removed from the system"
AA45 100B_E 2 08 40000800 "USB/TP07/NP07: Specified control code is not supported"
AA45 100C_E 2 08 40000800 "USB/TP07/NP07: Operation has been timed out, error is reported by the USBIO
driver"
AA45 100D_E 2 08 40000800 "USB/TP07/NP07: Invalid recipient has been specified"
AA45 100E_E 2 08 40000800 "USB/TP07/NP07: Either an invalid request type has been specified"
AA45 100F_E 2 08 40000800 "USB/TP07/NP07: Invalid IOCTL code has been specified, error is reported by the
USBIO"
AA45 1010_E 2 08 40000800 "USB/TP07/NP07: Direction of the data transfer request is not supported by that
pipe"
AA45 1011_E 2 08 40000800 "USB/TP07/NP07: Number of asynchronous data packets specified in an
asynchronous read"
AA45 1012_E 2 08 40000800 "USB/TP07/NP07: Memory resources are exhausted. This error is reported by the
USBIO driver"
AA45 1013_E 2 08 40000800 "USB/TP07/NP07: The specified pipe was not found in the current configuration"
AA45 1014_E 2 08 40000800 "USB/TP07/NP07: An invalid asynchronous data packet has been specified"
AA45 1015_E 2 08 40000800 "USB/TP07/NP07: There are not enough system resources to complete the
operation"
AA45 1016_E 2 08 40000800 "USB/TP07/NP07: Specified interface was not found in the current configuration"
AA45 1017_E 2 08 40000800 "USB/TP07/NP07: Operation cannot be executed while the USB device is in the
current state"
AA45 1018_E 2 08 40000800 "USB/TP07/NP07: Invalid parameter has been specified with an IOCTL operation"
AA45 1019_E 2 08 40000800 "USB/TP07/NP07: Evaluation interval of the USBIO DEMO version has expired"
AA45 101A_E 2 08 40000800 "USB/TP07/NP07: Invalid power state has been specified"
AA45 101B_E 2 08 40000800 "USB/TP07/NP07: Device has entered a power down state"
AA45 101C_E 2 08 40000800 "USB/TP07/NP07: API version reported by the USBIO driver does not match"
AA45 101D_E 2 08 40000800 "USB/TP07/NP07: Set configuration operation has failed, error is reported by the
USBIO"
AA45 1080_E 2 08 40000800 "USB/TP07/NP07: Operation has failed due to a restriction of the USBIO LIGHT
version"
AA45 1081_E 2 08 40000800 "USB/TP07/NP07: Operation has failed due to a restriction of the USBIO LIGHT
version"

86 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
AA45 1082_E 2 08 40000800 "USB/TP07/NP07: Operation has failed due to a restriction of the USBIO LIGHT
version"
AA45 1083_E 2 08 40000800 "USB/TP07/NP07: Operation has failed due to a restriction of the USBIO LIGHT
version"
AA45 1084_E 2 00 00000000 "USB/TP07/NP07: Operation has failed due to a restriction of the USBIO LIGHT
version"
AA45 1085_E 2 08 40000800 "USB/TP07/NP07: Operation has failed due to a restriction of the USBIO LIGHT
version"
AA45 1086_E 2 08 40000800 "USB/TP07/NP07: The operation has failed due to a restriction of the USBIO
LIGHT version"
AA45 1087_E 2 08 40000800 "USB/TP07/NP07: Operation has failed due to a restriction of the USBIO LIGHT
version"
AA45 1100_E 2 08 40000800 "USB/TP07/NP07: The specified device object does not exist"
AA45 1102_E 2 08 40000800 "USB/TP07/NP07: Device object was opened, there is no valid handle to execute
the operation"
AA45 1104_E 2 08 40000800 "USB/TP07/NP07: Enumeration of the specified devices has failed"
AA45 1105_E 2 08 40000800 "USB/TP07/NP07: Invalid parameter has been passed to a function"
AA45 1106_E 2 08 40000800 "USB/TP07/NP07: Library setupapi.dll could not be loaded"
AA45 2000_E 2 08 40000800 "USB/TP07/NP07: Set configuration request has failed"
AA45 3000_E 2 08 40000800 "USB/TP07/NP07: Buffer is too small, error is reported by the USB bus driver
USBD"
AA45 4000_E 2 08 40000800 "USB/TP07/NP07: Interface was not found, error is reported by the USB bus driver
USBD"
AA45 5000_E 2 08 40000800 "USB/TP07/NP07: Invalid pipe flags have been specified"
AA45 6000_E 2 08 40000800 "USB/TP07/NP07: Operation has been timed out, error is reported by the USB bus
driver"
AA45 7000_E 2 08 40000800 "USB/TP07/NP07: USB device is gone, error is reported by the USB bus driver
USBD"

U25604-J-Z745-1-7600 May 2011 87

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Printer TP06 (Class: 0048)

The following table lists the M-Status and M-Data codes assigned to printer
class 0048.

Table 32: Printer (Class: 0048)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0048 DEFA_W 4 00 00000000 "RJ03/TP06/NP06: DEFAULT_WARNING"
0048 DEFA_E 4 00 00000000 "RJ03/TP06/NP06: DEFAULT_ERROR"
0048 0001_E 2 00 02000000 "RJ03/TP06/NP06: Journal paper low"
0048 8100_E 4 00 00000000 "RJ03/TP06/NP06: Unexpected data was received"
0048 8101_E 4 00 00000000 "RJ03/TP06/NP06: Allocation error, not enough resources to allocate internal
memory"
0048 8102_E 4 00 00000000 "RJ03/TP06/NP06: A READ command could not be executed in the specified
monitoring time"
0048 8103_E 4 00 00000000 "RJ03/TP06/NP06: Code page not available"
0048 8104_E 4 00 00000000 "RJ03/TP06/NP06: Cannot open image file or invalid file name give up"
0048 8105_E 4 00 00000000 "RJ03/TP06/NP06: Cannot read the file to be loaded"
0048 8106_E 4 00 00000000 "RJ03/TP06/NP06: Invalid logo type"
0048 8107_E 4 08 00000000 "RJ03/TP06/NP06: Printer is in offline state without any specific device error"
0048 8108_E 4 08 00000000 "RJ03/TP06/NP06: No USB devices of the specified type available"
0048 8000_E 4 05 00000000 "RJ03/TP06/NP06: Journal paper out"
0048 8001_E 4 01 00000000 "RJ03/TP06/NP06: Paper jam while paper cut"
0048 8002_E 4 00 00000000 "RJ03/TP06/NP06: Carrier does not found the home position"
0048 8003_E 4 01 00000000 "RJ03/TP06/NP06: Paper jam before cut"
0048 8004_E 4 03 00000000 "RJ03/TP06/NP06: Black dot mark not found"
0048 8005_E 4 16 00000000 "RJ03/TP06/NP06: Paper jam after cutting the receipt in the presenter"
0048 8006_E 4 16 00000000 "RJ03/TP06/NP06: Paper jam after cut receipt after reject command"
0048 8007_E 4 01 00000000 "RJ03/TP06/NP06: Receipt paper jam while printing"
0048 8008_E 4 00 00000000 "RJ03/TP06/NP06: Power voltage of printer is too high"
0048 8009_E 4 00 00000000 "RJ03/TP06/NP06: Power voltage of printer is too low"
0048 800A_E 4 00 00000000 "RJ03/TP06/NP06: Temperature of print head is too high"
0048 800B_E 4 00 00000000 "RJ03/TP06/NP06: Hardware error"
0048 800C_E 4 00 00000000 "RJ03/TP06/NP06: Paper is not at print starting position"

88 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Printer USB/TP06 (Class: AA48)

The following table lists the M-Status and M-Data codes assigned to printer
class AA48. This error is an internal generated error derived from the original
CSC-W32 error class 0003.

Refer to section ”Error Class Mapping” on page 5.

Table 33: Printer (Class: AA48)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
AA48 DEFA_W 2 00 00000000 "USB/TP06/NP06: DEFAULT_WARNING"
AA48 DEFA_E 4 00 00000000 "USB/TP06/NP06: DEFAULT_ERROR"
AA48 8000_E 2 08 00000000 "USB/TP06/NP06: Unexpected descriptor was reported from USB device"
AA48 8001_E 2 08 00000000 "USB/TP06/NP06: Device not found"
AA48 8002_E 2 08 00000000 "USB/TP06/NP06: Not enough memory available"
AA48 8003_E 2 08 00000000 "USB/TP06/NP06: It was no endpoint found in the descriptor"
AA48 8004_E 2 08 00000000 "USB/TP06/NP06: The creation of the list of USB devices failed"
AA48 FE08_E 2 08 00000000 "USB/TP06/NP06: USB write command could not be executed in the specified
monitoring time"
AA48 FE09_E 2 08 00000000 "USB/TP06/NP06: USB read command could not be executed in the specified
monitoring time"
AA48 FE0A_E 2 08 00000000 "USB/TP06/NP06: USB READ command is cancelled by the user"
AA48 FE89_E 2 08 00000000 "USB/TP06/NP06: The pointer pData is illegal"
AA48 FE9C_E 2 08 00000000 "USB/TP06/NP06: The length in DataSize is 0 (zero)"
AA48 0001_E 2 08 00000000 "USB/TP06/NP06: CRC error has been detected"
AA48 0002_E 2 08 00000000 "USB/TP06/NP06: Bit stuffing error has been detected"
AA48 0003_E 2 08 00000000 "USB/TP06/NP06: DATA toggle mismatch has been detected"
AA48 0004_E 2 08 00000000 "USB/TP06/NP06: STALLPID has been detected, error is reported by the USB host
controller"
AA48 0005_E 2 08 00000000 "USB/TP06/NP06: USB device is not responding, error is reported by the USB
host"
AA48 0006_E 2 08 00000000 "USB/TP06/NP06: PID check has failed, error is reported by the USB host
controller"
AA48 0007_E 2 08 00000000 "USB/TP06/NP06: Unexpected PID detected, error is reported by the USB host"
AA48 0008_E 2 08 00000000 "USB/TP06/NP06: Data overrun error detected, error is reported by the USB host"
AA48 0009_E 2 08 00000000 "USB/TP06/NP06: Data underrun error detected, error is reported by the USB host"
AA48 000A_E 2 08 00000000 "USB/TP06/NP06: Error code is reserved by the USB host controller driver"
AA48 000B_E 2 08 00000000 "USB/TP06/NP06: Error code is reserved by the USB host controller driver"
AA48 000C_E 2 08 00000000 "USB/TP06/NP06: Buffer overrun has been detected, error is reported by the USB
host"
AA48 000D_E 2 08 00000000 "USB/TP06/NP06: Buffer underrun has been detected, error is reported by the USB
host"
AA48 000F_E 2 08 00000000 "USB/TP06/NP06: Buffer was not accessed, error is reported by the USB host"
AA48 0010_E 2 08 00000000 "USB/TP06/NP06: FIFO error has been detected, PCI bus latency was too long"
AA48 0011_E 2 08 00000000 "USB/TP06/NP06: XACT error has been detected, error is reported by the USB
host"
AA48 0012_E 2 08 00000000 "USB/TP06/NP06: Device is babbling, data transfer phase exceeds the USB frame
length"
AA48 0013_E 2 08 00000000 "USB/TP06/NP06: Data buffer error has been detected, error is reported by the
USB host"
AA48 0030_E 2 08 00000000 "USB/TP06/NP06: Endpoint has been halted by the USB bus driver USBD"
AA48 0100_E 2 08 00000000 "USB/TP06/NP06: Memory allocation attempt has failed, error is reported by the
USB bus"
AA48 0200_E 2 08 00000000 "USB/TP06/NP06: Invalid URB function code has been passed, error is reported
by the USB"

U25604-J-Z745-1-7600 May 2011 89

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
AA48 0300_E 2 08 00000000 "USB/TP06/NP06: Invalid parameter has been passed, error is reported by the
USB bus"
AA48 0400_E 2 08 00000000 "USB/TP06/NP06: There are data transfer requests pending for the device"
AA48 0500_E 2 08 00000000 "USB/TP06/NP06: Request has failed, error is reported by the USB bus driver
USBD"
AA48 0600_E 2 08 00000000 "USB/TP06/NP06: Invalid pipe handle has been passed, error is reported by the
USB bus"
AA48 0700_E 2 08 00000000 "USB/TP06/NP06: There is not enough bandwidth available, error is reported by
the USB bus"
AA48 0800_E 2 08 00000000 "USB/TP06/NP06: Internal host controller error has been detected"
AA48 0900_E 2 08 00000000 "USB/TP06/NP06: Short transfer has been detected, error is reported by the USB
bus"
AA48 0A00_E 2 08 00000000 "USB/TP06/NP06: Bad start frame has been specified, error is reported by the USB
bus"
AA48 0B00_E 2 08 00000000 "USB/TP06/NP06: Asynchronous request has failed, error is reported by the USB
bus driver"
AA48 0C00_E 2 08 00000000 "USB/TP06/NP06: USB frame control is currently owned, error is reported by the
USB bus"
AA48 0D00_E 2 08 00000000 "USB/TP06/NP06: USB frame control is currently not owned, error is reported by
the USB"
AA48 0E00_E 2 08 00000000 "USB/TP06/NP06: Operation is not supported, error is reported by the USB bus
driver"
AA48 0F00_E 2 08 00000000 "USB/TP06/NP06: Invalid configuration descriptor was reported by the device"
AA48 1000_E 2 08 00000000 "USB/TP06/NP06: Operation has failed, error is reported by the USBIO driver"
AA48 1001_E 2 08 00000000 "USB/TP06/NP06: Invalid input buffer has been passed to an IOCTL operation"
AA48 1002_E 2 08 00000000 "USB/TP06/NP06: Invalid output buffer has been passed to an IOCTL operation"
AA48 1003_E 2 08 00000000 "USB/TP06/NP06: There is not enough system memory available to complete the
operation"
AA48 1004_E 2 08 00000000 "USB/TP06/NP06: There are read or write requests pending, error is reported by
the USBIO"
AA48 1005_E 2 08 00000000 "USB/TP06/NP06: USB device is already configured, error is reported by the
USBIO"
AA48 1006_E 2 08 00000000 "USB/TP06/NP06: The USB device is not configured, error is reported by the
USBIO driver"
AA48 1007_E 2 08 00000000 "USB/TP06/NP06: There are open pipes, error is reported by the USBIO driver"
AA48 1008_E 2 08 00000000 "USB/TP06/NP06: Either the handle is already bound to a pipe"
AA48 1009_E 2 08 00000000 "USB/TP06/NP06: Handle is not bound to a pipe, error is reported by the USBIO
driver"
AA48 100A_E 2 08 00000000 "USB/TP06/NP06: USB device has been removed from the system"
AA48 100B_E 2 08 00000000 "USB/TP06/NP06: Specified control code is not supported"
AA48 100C_E 2 08 00000000 "USB/TP06/NP06: Operation has been timed out, error is reported by the USBIO
driver"
AA48 100D_E 2 08 00000000 "USB/TP06/NP06: Invalid recipient has been specified"
AA48 100E_E 2 08 00000000 "USB/TP06/NP06: Either an invalid request type has been specified"
AA48 100F_E 2 08 00000000 "USB/TP06/NP06: Invalid IOCTL code has been specified, error is reported by the
USBIO"
AA48 1010_E 2 08 00000000 "USB/TP06/NP06: Direction of the data transfer request is not supported by that
pipe"
AA48 1011_E 2 08 00000000 "USB/TP06/NP06: Number of asynchronous data packets specified in an
asynchronous read"
AA48 1012_E 2 08 00000000 "USB/TP06/NP06: Memory resources are exhausted. This error is reported by the
USBIO driver"
AA48 1013_E 2 08 00000000 "USB/TP06/NP06: The specified pipe was not found in the current configuration"
AA48 1014_E 2 08 00000000 "USB/TP06/NP06: An invalid asynchronous data packet has been specified"
AA48 1015_E 2 08 00000000 "USB/TP06/NP06: There are not enough system resources to complete the
operation"
AA48 1016_E 2 08 00000000 "USB/TP06/NP06: Specified interface was not found in the current configuration"
AA48 1017_E 2 08 00000000 "USB/TP06/NP06: Operation cannot be executed while the USB device is in the
current state"
AA48 1018_E 2 08 00000000 "USB/TP06/NP06: Invalid parameter has been specified with an IOCTL operation"
AA48 1019_E 2 08 00000000 "USB/TP06/NP06: Evaluation interval of the USBIO DEMO version has expired"
AA48 101A_E 2 08 00000000 "USB/TP06/NP06: Invalid power state has been specified"
AA48 101B_E 2 08 00000000 "USB/TP06/NP06: Device has entered a power down state"
AA48 101C_E 2 08 00000000 "USB/TP06/NP06: API version reported by the USBIO driver does not match"
AA48 101D_E 2 08 00000000 "USB/TP06/NP06: Set configuration operation has failed, error is reported by the
USBIO"

90 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
AA48 1080_E 2 08 00000000 "USB/TP06/NP06: Operation has failed due to a restriction of the USBIO LIGHT
version"
AA48 1081_E 2 08 00000000 "USB/TP06/NP06: Operation has failed due to a restriction of the USBIO LIGHT
version"
AA48 1082_E 2 08 00000000 "USB/TP06/NP06: Operation has failed due to a restriction of the USBIO LIGHT
version"
AA48 1083_E 2 08 00000000 "USB/TP06/NP06: Operation has failed due to a restriction of the USBIO LIGHT
version"
AA48 1084_E 2 08 00000000 "USB/TP06/NP06: Operation has failed due to a restriction of the USBIO LIGHT
version"
AA48 1085_E 2 08 00000000 "USB/TP06/NP06: Operation has failed due to a restriction of the USBIO LIGHT
version"
AA48 1086_E 2 08 00000000 "USB/TP06/NP06: The operation has failed due to a restriction of the USBIO
LIGHT version"
AA48 1087_E 2 08 00000000 "USB/TP06/NP06: Operation has failed due to a restriction of the USBIO LIGHT
version"
AA48 1100_E 2 08 00000000 "USB/TP06/NP06: The specified device object does not exist"
AA48 1102_E 2 08 00000000 "USB/TP06/NP06: Device object was opened, there is no valid handle to execute
the operation"
AA48 1104_E 2 08 00000000 "USB/TP06/NP06: Enumeration of the specified devices has failed"
AA48 1105_E 2 08 00000000 "USB/TP06/NP06: Invalid parameter has been passed to a function"
AA48 1106_E 2 08 00000000 "USB/TP06/NP06: Library setupapi.dll could not be loaded"
AA48 2000_E 2 08 00000000 "USB/TP06/NP06: Set configuration request has failed"
AA48 3000_E 2 08 00000000 "USB/TP06/NP06: Buffer is too small, error is reported by the USB bus driver
USBD"
AA48 4000_E 2 08 00000000 "USB/TP06/NP06: Interface was not found, error is reported by the USB bus driver
USBD"
AA48 5000_E 2 08 00000000 "USB/TP06/NP06: Invalid pipe flags have been specified"
AA48 6000_E 2 08 00000000 "USB/TP06/NP06: Operation has been timed out, error is reported by the USB bus
driver"
AA48 7000_E 2 08 00000000 "USB/TP06/NP06: USB device is gone, error is reported by the USB bus driver
USBD"

U25604-J-Z745-1-7600 May 2011 91

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Printer TP13 (Class: 004A/004B)

The following table lists the M-Status and M-Data codes assigned to printer
class 004A and 004B.

Table 34: Printer (Class: 004A)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
004A DEFA_W 2 00 00000000 "TP13 GDI: DEFAULT_WARNING"
004A DEFA_E 4 00 00000000 "TP13 GDI: DEFAULT_ERROR"
004A 0001_E 4 08 40000800 "TP13 GDI: Paper-out condition or paper not loaded."
004A 0002_E 2 05 80000000 "TP13 GDI: Cutter error occurred."
004A 0003_E 2 00 00000000 "TP13 GDI: By activated mark, recognition a mark is not found."
004A 0004_E 2 05 80000000 "TP13 GDI: Paper jam after the cutting of a receipt in the presenter"
004A 0005_E 2 00 00000000 "TP13 GDI: There was a paper jam."
004A 0006_E 4 00 00000000 "TP13 GDI: The temperature of the print head is too high."
004A 0007_E 4 00 00000000 "TP13 GDI: Cutter/printing unit is open or not locked."
004A 0009_E 2 00 00000000 "TP13 GDI: Unexpected data was received."
004A 000A_E 2 00 00000000 "TP13 GDI: A WRITE command could not be executed in the specified monitoring
time."
004A 000B_E 2 00 00000000 "TP13 GDI: A READ command could not be executed in the specified monitoring
time."
004A 000C_E 2 00 00000000 "TP13 GDI: The printer was not found or the printer was removed from the system"
004A 000D_E 2 00 00000000 "TP13 GDI: A READ command could not be executed."
004A 000E_E 2 00 00000000 "TP13 GDI: There was a communication error during a data transfer to the printer"
004A 000F_E 2 00 00000000 "TP13 GDI: Detection of an unknown error code."
004A 0010_E 2 00 00000000 "TP13 GDI: A printed receipt doesn't reach presenter outlet within 10 seconds."

Table 35: Printer (Class: 004B)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
004B DEFA_W 2 00 00000000 "LDTP13 GDI: DEFAULT_WARNING"
004B DEFA_E 4 00 00000000 "LDTP13 GDI: DEFAULT_ERROR"
004B 8000_E 2 00 00000000 "LDTP13 GDI: Cannot open firmware file."
004B 8001_E 2 00 00000000 "LDTP13 GDI: Cannot read the firmware file to be loaded."
004B 8002_E 2 00 00000000 "LDTP13 GDI: Cannot read the file to be loaded."
004B 8003_E 2 00 00000000 "LDTP13 GDI: The expected response of the Firmware Loader is not correct."
004B 8004_E 2 00 00000000 "LDTP13 GDI: Firmware file data do not reach the firmware controller correctly."
004B 8005_E 2 00 00000000 "LDTP13 GDI: An error occurred when the print system was started from the CSC
service."
004B 8023_E 2 00 00000000 "LDTP13 GDI: There was a communication error during a data transfer to the
printer"
004B 8025_E 2 00 00000000 "LDTP13 GDI: The printer did not respond to a request during a given time frame."
004B 0001_E 2 00 00000000 "LDTP13 GDI: The value of the registry entry "FILE_CTR" cross the maximum value
of loadable firmware files"
004B 0002_E 2 00 00000000 "LDTP13 GDI: No entry "FILE1" found in the registry."

92 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Reiner Scanner (Class: 0051)

The following table lists the M-Status and M-Data codes assigned to Reiner
Scanner class 0051.

Table 36: Reiner Scanner (Class: 0051)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0051 DEFA_E 4 99 0051DEFA000000000000 "REINER_CHQ: Default error"
0051 DEFA_W 2 99 0051WARN000000000000 "REINER_CHQ: Default warning"
0051 8000_W 2 99 00518000000000000000 "REINER_CHQ: Invalid parameter"
0051 8001_E 2 99 00518001000000000000 "REINER_CHQ: No document inserted"
0051 8002_E 2 99 00518002000000000000 "REINER_CHQ: Function CscPrtRead was calls, but no MICR
mode via CscPrtControl selected"
0051 8006_E 2 99 00518006000000000000 "REINER_CHQ: Cannot open raw file (R89X.RAW)"
0051 8007_E 2 99 00518007000000000000 "REINER_CHQ: Error writing raw file (R89X.RAW)"
0051 8008_E 2 99 00518008000000000000 "REINER_CHQ: The internal shutter could not be opened"
0051 8009_E 2 99 00518009000000000000 "REINER_CHQ: The internal shutter could not be closed"
0051 8100_E 4 99 00518100000000000000 "REINER_CHQ: The initialization of the scanner failed"
0051 8110_E 2 99 00518110000000000000 "REINER_CHQ: There is still a document in the scanner"
0051 8200_E 4 99 00518200000000000000 "REINER_CHQ: The firmware file(s) is/are invalid."
0051 8201_E 2 99 00518201000000000000 "REINER_CHQ: Error while loading the firmware file(s)"
0051 9001_E 2 99 00519001000000000000 "REINER_CHQ: Feeder failed to start document"
0051 9002_E 2 99 00519002000000000000 "REINER_CHQ: A document is stuck or lost in track"
0051 9003_E 2 99 00519003000000000000 "REINER_CHQ: The document feeder is empty"
0051 9004_E 2 99 00519004000000000000 "REINER_CHQ: The scanner housing is open"
0051 9005_E 2 99 00519005000000000000 "REINER_CHQ: The document ist out of the format range"
0051 9006_E 2 99 00519006000000000000 "REINER_CHQ: Double feed"
0051 9007_E 2 99 00519007000000000000 "REINER_CHQ: A document is still in track"
0051 9008_E 2 99 00519008000000000000 "REINER_CHQ: Document is not inside the left photosensor, in
front of the shutter"
0051 9009_E 4 99 00519009000000000000 "REINER_CHQ: Rejext box full, empty reject box"
0051 900A_E 4 99 0051900A000000000000 "REINER_CHQ: The reject box is open or not correctly
connected"
0051 900E_E 4 99 0051900E000000000000 "REINER_CHQ: Error message because the scanner has been
switched off"
0051 9010_E 2 99 00519010000000000000 "REINER_CHQ: Timeout while data transfer to the PC (images,
MICR)"
0051 9080_E 2 99 00519080000000000000 "REINER_CHQ: Internal error. Device not installed"
0051 9081_E 2 99 00519081000000000000 "REINER_CHQ: Internal error. Device is in use"
0051 9082_E 4 99 00519082000000000000 "REINER_CHQ: Internal error. Device is in a unknown state"
0051 9083_E 2 99 00519083000000000000 "REINER_CHQ: Internal error. Windows version does not allow
USB"
0051 9084_E 4 99 00519084000000000000 "REINER_CHQ: Internal error. Wrong Scanner interface type"
0051 9085_E 4 99 00519085000000000000 "REINER_CHQ: Internal error. Can not create mutex"
0051 9086_E 4 99 00519086000000000000 "REINER_CHQ: Internal error. Scanner not initialized"
0051 9087_E 4 99 00519087000000000000 "REINER_CHQ: Internal error. Unit not available"
0051 9088_E 4 99 00519088000000000000 "REINER_CHQ: Internal error. Front side camera not available"
0051 9089_E 4 99 00519089000000000000 "REINER_CHQ: Internal error. Rear side camera not available"
0051 908A_E 2 99 0051908A000000000000 "REINER_CHQ: Internal error. MICR reader not available"
0051 908B_E 2 99 0051908B000000000000 "REINER_CHQ: Internal error. Front side endorsement not
available"
0051 908C_E 2 99 0051908C000000000000 "REINER_CHQ: Internal error. Rear side endorsement not
available"
0051 908D_E 2 99 0051908D000000000000 "REINER_CHQ: Internal error. Stamp not available"
0051 908E_E 2 99 0051908E000000000000 "REINER_CHQ: Internal error. Orientation (mechanical
alignment) not available"
0051 908F_E 2 99 0051908F000000000000 "REINER_CHQ: Internal error. Object for this Unit is not available"
0051 9090_E 2 99 00519090000000000000 "REINER_CHQ: Internal error. Value not plausible"
0051 9091_E 2 99 00519091000000000000 "REINER_CHQ: Internal error. No jobs defined"
0051 9092_E 2 99 00519092000000000000 "REINER_CHQ: Internal error. USB don't receive all bytes from
front side image"

U25604-J-Z745-1-7600 May 2011 93

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
0051 9093_E 2 99 00519093000000000000 "REINER_CHQ: Internal error. USB don't receive all bytes from
back side image"
0051 90FF_E 2 99 005190FF000000000000 "REINER_CHQ: R89XAPI.DLL returned undefined error"
0051 9201_E 2 99 00519201000000000000 "REINER_CHQ: Illegal arguments calling IMACON.DLL"
0051 9202_E 2 99 00519202000000000000 "REINER_CHQ: Cannot open input file"
0051 9203_E 2 99 00519203000000000000 "REINER_CHQ: Error reading input"
0051 9204_E 2 99 00519204000000000000 "REINER_CHQ: Cannot open output file"
0051 9205_E 2 99 00519205000000000000 "REINER_CHQ: Error writing output file"
0051 9206_E 2 99 00519206000000000000 "REINER_CHQ: Not enough memory"
0051 9207_E 2 99 00519207000000000000 "REINER_CHQ: Image too long"
0051 9208_E 2 99 00519208000000000000 "REINER_CHQ: Image too large (for TIF)"
0051 9209_E 2 99 00519209000000000000 "REINER_CHQ: Image too small (<1 row)"
0051 92FF_E 2 99 005192FF000000000000 "REINER_CHQ: IMACON.DLL returned undefined error"
0051 9300_E 2 99 00519300000000000000 "REINER_CHQ: Internal error while calling DQF.DLL"
0051 9301_E 2 99 00519301000000000000 "REINER_CHQ: Internal error while calling DQF.DLL"
0051 9302_E 2 99 00519302000000000000 "REINER_CHQ: Internal error while calling DQF.DLL"
0051 9303_E 2 99 00519303000000000000 "REINER_CHQ: Internal error while calling DQF.DLL"
0051 9304_E 2 99 00519304000000000000 "REINER_CHQ: Internal error while calling DQF.DLL"
0051 9305_E 2 99 00519305000000000000 "REINER_CHQ: Internal error while calling DQF.DLL"
0051 93FF_E 2 99 005193FF000000000000 "REINER_CHQ: DQF.DLL returned undefined error"

94 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Printer TP12 (Class: 0052)

The following table lists the M-Status and M-Data codes assigned to printer
class 0052.

Table 37: Printer (Class: 0052)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0052 DEFA_E 2 08 00000000 "PRT GDI/TP12: Default error"
0052 DEFA_W 2 08 00000000 "PRT GDI/TP12: Default warning"
0052 0000_W 2 05 00000000 "PRT GDI/TP12: Hardware warning"
0052 0000_E 2 05 00000000 "PRT GDI/TP12: Hardware error"
0052 0001_E 2 05 00000000 "PRT GDI/TP12: Paper out condition"
0052 0002_E 2 09 00000000 "PRT GDI/TP12: The cover is open"
0052 0003_E 2 01 00000000 "PRT GDI/TP12: Paper jam, not possible to print"
0052 0004_E 2 16 00000000 "PRT GDI/TP12: Paper jam after cutting the receipt"
0052 0005_E 2 16 00000000 "PRT GDI/TP12: Paper jam, check paper feed"
0052 0006_E 2 01 00000000 "PRT GDI/TP12: Jam, cutter motor faulty"
0052 0007_E 2 08 00000000 "PRT GDI/TP12: RAM error, check memory"
0052 0008_E 2 08 00000000 "PRT GDI/TP12: The power voltage of the printer is not ok"
0052 0009_E 2 11 00000000 "PRT GDI/TP12: The temperature of the print head is too high"
0052 000A_E 2 09 00000000 "PRT GDI/TP12: Cutter, printing unit is open or not locked."
0052 000B_E 2 08 00000000 "PRT GDI/TP12: Control command missing"
0052 000C_E 2 08 00000000 "PRT GDI/TP12: An error occurred while the required line parameters were being
set"
0052 000D_E 2 03 00000000 "PRT GDI/TP12: Cutter error occurred"
0052 000E_E 2 00 00000000 "PRT GDI/TP12: Offered document transported to the retract box after a time-out"
0052 000F_E 2 00 00000000 "PRT GDI/TP12: A print job is to be executed although the print functionality has
not been activated"
0052 0010_E 2 00 00000000 "PRT GDI/TP12: Message, if the adjusted limit for the retract box is exceeded"
0052 0017_E 2 08 00000000 "PRT GDI/TP12: Communication error during data transfer"
0052 0019_E 2 08 00000000 "PRT GDI/TP12: Printer did not respond to a request during a given time frame"

U25604-J-Z745-1-7600 May 2011 95

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Single Note Acceptor (SNA/JCM/WBA) (Class: 0059)

The following table lists the M-Status and M-Data codes assigned to the Single
Note Acceptor or Japanese Cash Machine (JCM) class 0059.

Table 38: Single Note Acceptor (SNA) (Class: 0059)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0059 8000_E 2 99 00598000000000000000 "SNA_CIN: The acceptor did not respond as expected to a command
sent by the device handler"
0059 8001_E 2 99 00598000000000000000 "SNA_CIN: The cashbox is full"
0059 8002_E 2 99 00598000000000000000 "SNA_CIN: The cashbox is either removed or not completely installed
(not snapped in)"
0059 8003_E 2 99 00598000000000000000 "SNA_CIN: A bill is jammed inside the acceptor head"
0059 8004_E 2 99 00598000000000000000 "SNA_CIN: A bill jam has occurred in the transport section of the
acceptor"
0059 8005_E 2 99 00598000000000000000 "SNA_CIN: The acceptor has stopped because a second bill has been
inserted"
0059 8006_E 2 99 00598000000000000000 "SNA_CIN: The acceptor has detected an action thought to be
mischievous"
0059 8007_E 2 99 00598000000000000000 "SNA_CIN: Normal acceptor operation cannot continue due to a
failure"
0059 8008_E 2 99 00598000000000000000 "SNA_CIN: An error has developed in the communication data"
0059 8009_E 2 99 00598000000000000000 "SNA_CIN: Command from the controller is not valid"
0059 80A2_E 2 99 00598000000000000000 "SNA_CIN: Stack motor failure"
0059 80A5_E 2 99 00598000000000000000 "SNA_CIN: Transport (feed) motor speed failure"
0059 80A6_E 2 99 00598000000000000000 "SNA_CIN: Transport (feed) motor failure"
0059 80AB_E 2 99 00598000000000000000 "SNA_CIN: Cashbox not ready"
0059 80AF_E 2 99 00598000000000000000 "SNA_CIN: Validator head is removed or wrong type is installed"
0059 80B0_E 2 99 00598000000000000000 "SNA_CIN: Boot ROM failure"
0059 80B1_E 2 99 00598000000000000000 "SNA_CIN: External ROM failure"
0059 80B2_E 2 99 00598000000000000000 "SNA_CIN: ROM failure"
0059 80B3_E 2 99 00598000000000000000 "SNA_CIN: External ROM writing failure"
0059 FE95_E 2 99 00598000000000000000 "SNA_CIN: The total protocol monitoring time during transmission has
been exceeded"
0059 FE96_E 2 99 00598000000000000000 "SNA_CIN: The total protocol monitoring time during reception has
been exceeded"

96 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Euro Banknote Handler (EBH/RM2) (Class: 005A)

The following table lists the M-Status and M-Data codes assigned to the Euro
Bank Note Handler class 005A.

Table 39: Euro Bank Note Handler (class: 005A)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
005A DEFA_E 2 00 0000000000000000000000 "CASHOUT RM2: DEFAULT_ERROR"
005A DEFA_W 2 00 0000000000000000000000 "CASHOUT RM2: DEFAULT_WARNING"
005A 0001_E 2 00 0000000000000000000000 "CASHOUT RM2: 2nd byte of (CNTL) of command is undefined."
005A 0002_E 2 00 0000000000000000000000 "CASHOUT RM2: 0 or more than 100 in (Total) of (Stacking Limit
Number of Notes) or 0 after calculation of (Media 16)."
005A 0004_E 2 00 0000000000000000000000 "CASHOUT RM2: Number of notes is over total number of
stackable notes."
005A 0005_E 2 00 0000000000000000000000 "CASHOUT RM2: Requested counts of bills was 0 or greater than
109."
005A 0006_E 2 00 0000000000000000000000 "CASHOUT RM2: Define note configuration command, (LNG) of
"Note configuration" is not correct."
005A 0007_E 2 00 0000000000000000000000 "CASHOUT RM2: Define destination of deposit command, (LNG)
of "Destination information" is not correct."
005A 0008_E 2 00 0000000000000000000000 "CASHOUT RM2: Define destination of dispense command, (LNG)
of "Destination information" is not correct."
005A 0009_E 2 00 0000000000000000000000 "CASHOUT RM2: Define deposit function command, (LNG) of
"Deposit Function" is not correct."
005A 000A_E 2 00 0000000000000000000000 "CASHOUT RM2: Returning or storing is received when any note
is not stacked in temporary stack unit."
005A 000C_E 2 00 0000000000000000000000 "CASHOUT RM2: Define storing function command, (LNG) of
"Storing Function" is not correct."
005A 000D_E 2 00 0000000000000000000000 "CASHOUT RM2: (LNG) of "Transaction Number" is not correct."
005A 000E_E 2 00 0000000000000000000000 "CASHOUT RM2: Define destinatin of deposit command, "Disti-
nation information" is not correct."
005A 000F_E 2 00 0000000000000000000000 "CASHOUT RM2: Fix recognition result of BIM command, (LNG)
of "Fix Data" is not correct."
005A 0010_E 2 00 0000000000000000000000 "CASHOUT RM2: Fix recognition result of BIM command,
(Number) of "Fix Data" was 0 or greater than 128."
005A 0011_E 2 00 0000000000000000000000 "CASHOUT RM2: Fix recognition result of BIM command,
(Category) of "Fix Data" was 0 or greater than 4."
005A 0012_E 2 00 0000000000000000000000 "CASHOUT RM2: Storing is received when cassettes are full or
storable media is not set for cassette."
005A 0013_E 2 00 0000000000000000000000 "CASHOUT RM2: Dispense is received when rejection unit is full."
005A 0014_E 2 00 0000000000000000000000 "CASHOUT RM2: Collecting is received when cassettes are full or
storable media is not set for cassette."
005A 0015_E 2 00 0000000000000000000000 "CASHOUT RM2: Define destination of deposit command, ""Disti-
nation information" is not possible to transport it."
005A 0017_E 2 00 0000000000000000000000 "CASHOUT RM2: PDL transmitting command is received before
PDL start command reception of BID or a cassette control part."
005A 0019_E 2 00 0000000000000000000000 "CASHOUT RM2: PDL command is received, when PDL function
for tray controller is not enabled."
005A 001A_E 2 00 0000000000000000000000 "CASHOUT RM2: Command data error. When the storing cassette
was full, there is no destination of the unfit note."
005A 001B_E 2 00 0000000000000000000000 "CASHOUT RM2: Command data error. When the storing cassette
was full, there is no destination of the L3 note."
005A 001C_E 2 00 0000000000000000000000 "CASHOUT RM2: Command receiving timing abnormal. L2-Box is
full."
005A 001D_E 2 00 0000000000000000000000 "CASHOUT RM2: Command receiving timing abnormal. Reject
cassette is full before deposit."
005A 001E_E 2 00 0000000000000000000000 "CASHOUT RM2: Command receiving timing abnormal. Trans-
ported cassette not installed before deposit."
005A 0020_E 2 00 0000000000000000000000 "CASHOUT RM2: Command excluding PDL command is received,
when PID processing for BID or tray controller is executed."
005A 0021_E 2 00 0000000000000000000000 "CASHOUT RM2: Dispense is received, when the specified
denomination lane is suppressed."
005A 0022_E 2 00 0000000000000000000000 "CASHOUT RM2: Dispense is received, when the specified
denomination lane is empty."

U25604-J-Z745-1-7600 May 2011 97

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A 002B_E 2 00 0000000000000000000000 "CASHOUT RM2: Dispense is received, when the specified
denomination lane is not set."
005A 002C_E 2 00 0000000000000000000000 "CASHOUT RM2: Dispense is received, when the denomination of
the specified lane is not set or the cassette is not set."
005A 0032_E 2 00 0000000000000000000000 "CASHOUT RM2: Storable cassette is not installed."
005A 0035_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray is not installed."
005A 0036_E 2 00 0000000000000000000000 "CASHOUT RM2: Media is remained in cassette A."
005A 0037_E 2 00 0000000000000000000000 "CASHOUT RM2: Media is remained in cassette B."
005A 0038_E 2 00 0000000000000000000000 "CASHOUT RM2: Media is remained in cassette C."
005A 0039_E 2 00 0000000000000000000000 "CASHOUT RM2: Media is remained in cassette D."
005A 003A_E 2 00 0000000000000000000000 "CASHOUT RM2: Media is remained in reject cassette."
005A 003B_E 2 00 0000000000000000000000 "CASHOUT RM2: Media is remained in collection cassette."
005A 003D_E 2 00 0000000000000000000000 "CASHOUT RM2: Storable cassette is full."
005A 0040_E 2 00 0000000000000000000000 "CASHOUT RM2: Data in (ID) of additional packet is not correct,
undefined. Or data in (LNG) is not correct."
005A 0046_E 2 00 0000000000000000000000 "CASHOUT RM2: Sense of operation detection test or end of
operation detection test is received without receiving of start of
operation detection test."
005A 004A_E 2 00 0000000000000000000000 "CASHOUT RM2: Destination is not set in (Destination of Read /
Write)."
005A 004B_E 2 00 0000000000000000000000 "CASHOUT RM2: Destination is not correct in (Destination of Read
/ Write)."
005A 004C_E 2 00 0000000000000000000000 "CASHOUT RM2: Data is not set in (Data for Cassette ID)."
005A 004D_E 2 00 0000000000000000000000 "CASHOUT RM2: Data is not correct in (Destination Information)
in (Data for Cassette ID)."
005A 004F_E 2 00 0000000000000000000000 "CASHOUT RM2: Data is not set in (Set Data for Cassette
Adjustment) or not correct."
005A 0050_E 2 00 0000000000000000000000 "CASHOUT RM2: Data is not set in (Set Data of Adjustment Value
for Upper Unit) or not correct."
005A 0051_E 2 00 0000000000000000000000 "CASHOUT RM2: Data is not correct in (Set Data for Cassette
Adjustment)."
005A 0053_E 2 00 0000000000000000000000 "CASHOUT RM2: Data is not correct in (Set Data of Adjustment
Value for Upper Unit)."
005A 0054_E 2 00 0000000000000000000000 "CASHOUT RM2: Data is not set in (Set Data for Cassette Appli-
cation) or not correct."
005A 0055_E 2 00 0000000000000000000000 "CASHOUT RM2: Data is not correct in (Set Data for Cassette
Application)."
005A 0063_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination information is not set."
005A 0064_E 2 00 0000000000000000000000 "CASHOUT RM2: Destination information is not set."
005A 0065_E 2 00 0000000000000000000000 "CASHOUT RM2: Destination information is not set."
005A 0066_E 2 00 0000000000000000000000 "CASHOUT RM2: Deposit function is not set."
005A 0067_E 2 00 0000000000000000000000 "CASHOUT RM2: Storing function is not set."
005A 0068_E 2 00 0000000000000000000000 "CASHOUT RM2: Transaction number is not set."
005A 0069_E 2 00 0000000000000000000000 "CASHOUT RM2: Transaction number is not set."
005A 006A_E 2 00 0000000000000000000000 "CASHOUT RM2: Transaction number is not set."
005A 006B_E 2 00 0000000000000000000000 "CASHOUT RM2: Transaction number is not set."
005A 006C_E 2 00 0000000000000000000000 "CASHOUT RM2: Transaction number is not set."
005A 006D_E 2 00 0000000000000000000000 "CASHOUT RM2: Transaction number is not set."
005A 006E_E 2 00 0000000000000000000000 "CASHOUT RM2: Transaction number is not set."
005A 006F_E 2 00 0000000000000000000000 "CASHOUT RM2: Transaction number is not set."
005A 0070_E 2 00 0000000000000000000000 "CASHOUT RM2: Data in (Log ID) ACT is not set or data in (LNG)
is not correct."
005A 0071_E 2 00 0000000000000000000000 "CASHOUT RM2: Data in (Stacking Limit Number of Notes) is not
set or data in (LNG) is not correct."
005A 0073_E 2 00 0000000000000000000000 "CASHOUT RM2: There was no requested number of bills to be
dispensed, or the data length LNG was incorrect."
005A 0074_E 2 00 0000000000000000000000 "CASHOUT RM2: Transaction number is not set."
005A 0075_E 2 00 0000000000000000000000 "CASHOUT RM2: Data in (Time) is not set or data in (LNG) is not
correct."
005A 0076_E 2 00 0000000000000000000000 "CASHOUT RM2: Transaction number is not set."
005A 0077_E 2 00 0000000000000000000000 "CASHOUT RM2: BID command is not set."
005A 0078_E 2 00 0000000000000000000000 "CASHOUT RM2: The transportation destinations of level 3 are not
united by all denominations."
005A 0079_E 2 00 0000000000000000000000 "CASHOUT RM2: Fix data is not set."
005A 007A_E 2 00 0000000000000000000000 "CASHOUT RM2: Command data of define note configuration
abnormal. The data length of the packet was specified 258 bytes
or more."

98 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A 007B_E 2 00 0000000000000000000000 "CASHOUT RM2: Command data of transmission of PDL data
abnormal. The data length of the packet was specified 994 bytes
or more."
005A 007C_E 2 00 0000000000000000000000 "CASHOUT RM2: Command data of maintenance commands
abnormal. The packet of the data length in 258 bytes or more was
specified."
005A 007D_E 2 00 0000000000000000000000 "CASHOUT RM2: Command data of set maximum number of
retract box abnormal. Maximum number is not set."
005A 007E_E 2 00 0000000000000000000000 "CASHOUT RM2: The specified command data of “Define Storing
Function” was abnormal."
005A 007F_E 2 00 0000000000000000000000 "CASHOUT RM2: The specified command data of "Define Skew
Threshold" was abnormal. The"
005A 0080_E 2 00 0000000000000000000000 "CASHOUT RM2: Data in (Current Date and Time) is abnormal or
data in (LNG) is not correct."
005A 0083_E 2 00 0000000000000000000000 "CASHOUT RM2: Set data of the number of remaining bills was
invalid, or the data length LNG was incorrect."
005A 0084_E 2 00 0000000000000000000000 "CASHOUT RM2: Data in (Set of Abnormal Notes) is abnormal or
data in (LNG) is not correct."
005A 0086_E 2 00 0000000000000000000000 "CASHOUT RM2: Data in (Set of Numbers for Full/Near-full) is
abnormal or data in (LNG) is not correct."
005A 0087_E 2 00 0000000000000000000000 "CASHOUT RM2: BID command data in (LNG) is not correct."
005A 0088_E 2 00 0000000000000000000000 "CASHOUT RM2: Storing media for overflow is not correct."
005A 0089_E 2 00 0000000000000000000000 "CASHOUT RM2: Storing media for cartridge is not correct."
005A 008C_E 2 00 0000000000000000000000 "CASHOUT RM2: Data in (Module Number) of (Set of Deposit
Function) is abnormal or data in (LNG) is not correct."
005A 008E_E 2 00 0000000000000000000000 "CASHOUT RM2: Set denomination for the cassette was invalid,
or the data length LNG was incorrect."
005A 008F_E 2 00 0000000000000000000000 "CASHOUT RM2: Duplicated data is set in (Cassette Denomi-
nation Setting) or data in (LNG) is not correct."
005A 0090_E 2 00 0000000000000000000000 "CASHOUT RM2: Length of whole command is not correct."
005A 0091_E 2 00 0000000000000000000000 "CASHOUT RM2: Data in (BCW) is not correct."
005A 0092_E 2 00 0000000000000000000000 "CASHOUT RM2: 1st byte of (CNTL) is undefined."
005A 0093_E 2 00 0000000000000000000000 "CASHOUT RM2: Data for (ID) in (CNTL) is not set."
005A 0094_E 2 00 0000000000000000000000 "CASHOUT RM2: Data in (LNG) of (CNTL) is not correct."
005A 0095_E 2 00 0000000000000000000000 "CASHOUT RM2: Status sense or unexpected command is
received after WDT-out."
005A 0096_E 2 00 0000000000000000000000 "CASHOUT RM2: Status sense or unexpected command is
received after power-down during execution."
005A 0097_E 2 00 0000000000000000000000 "CASHOUT RM2: Status sense or unexpected command is
received during mechanical down."
005A 0098_E 2 00 0000000000000000000000 "CASHOUT RM2: Status sense or unexpected command is
received after receiving of stop."
005A 0099_E 2 00 0000000000000000000000 "CASHOUT RM2: Status sense or unexpected command is
received after detection of mechanical down."
005A 009A_E 2 00 0000000000000000000000 "CASHOUT RM2: It is mechanism operation command reception
before data write command reception."
005A 009D_E 2 00 0000000000000000000000 "CASHOUT RM2: Data in [Kind of Safe Pass] is abnormal or Data
in [LNG] is not correct."
005A 009E_E 2 00 0000000000000000000000 "CASHOUT RM2: Data in (Priority level of Dispense) is abnormal
or data in (LNG) is not correct."
005A 00A0_E 2 00 0000000000000000000000 "CASHOUT RM2: Data in (ACT) of feed start command to tray
controller is not correct."
005A 00A1_E 2 00 0000000000000000000000 "CASHOUT RM2: Data in (ACT) of storing start command to tray
controller is not correct."
005A 00A2_E 2 00 0000000000000000000000 "CASHOUT RM2: Data in (ACT) of reset-conveyance command to
tray controller is not correct."
005A 00A3_E 2 00 0000000000000000000000 "CASHOUT RM2: Data in (ACT) of motor speed change command
to tray controller is not correct."
005A 00B0_E 2 00 0000000000000000000000 "CASHOUT RM2: Define destination of dispense command "Desti-
nation information" is not correct."
005A 00B1_E 2 00 0000000000000000000000 "CASHOUT RM2: Define deposit function command "Deposit
Function" is not correct."
005A 1001_E 2 00 0000000000000000000000 "CASHOUT RM2: I/O module: shutter closed, money in, a note
stucks out of the bundle."
005A 1002_E 2 00 0000000000000000000000 "CASHOUT RM2: I/O module: shutter cannot be opened."
005A 1003_E 2 00 0000000000000000000000 "CASHOUT RM2: I/O module: shutter should open but fork light
sensor broken."
005A 1004_E 2 00 0000000000000000000000 "CASHOUT RM2: I/O module: shutter should open but fork light
sensor broken."
005A 1005_E 2 00 0000000000000000000000 "CASHOUT RM2: Solenoid (SL14) or switch (SW19) abnormal.
There is a possibility broken."

U25604-J-Z745-1-7600 May 2011 99

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A 1006_E 2 00 0000000000000000000000 "CASHOUT RM2: Shutter error. Switch (SW17=OFF, SW18=ON)
abnormal "
005A 1007_E 2 00 0000000000000000000000 "CASHOUT RM2: Shutter blocked during closing."
005A 1008_E 2 00 0000000000000000000000 "CASHOUT RM2: Shutter blocked during opening."
005A 1009_E 2 00 0000000000000000000000 "CASHOUT RM2: I/O module: the inner upper tray does not reach
the upper end position."
005A 100D_E 2 00 0000000000000000000000 "CASHOUT RM2: I/O module: shutter closed SW18 wrong."
005A 100E_E 2 00 0000000000000000000000 "CASHOUT RM2: I/O module: shutter closed possible not locked,
SW19 wrong."
005A 100F_E 2 00 0000000000000000000000 "CASHOUT RM2: I/O module "
005A 1010_E 2 00 0000000000000000000000 "CASHOUT RM2: An abnormal rotation of the motor (DM11) was
detected when the note was dispensed from the outlet."
005A 1011_E 2 00 0000000000000000000000 "CASHOUT RM2: An abnormal rotation of the motor (DM18) was
detected when the note was dispensed from the outlet."
005A 1012_E 2 00 0000000000000000000000 "CASHOUT RM2: An abnormal rotation of the motor (DM18) was
detected when the note accumulated to the outlet."
005A 1013_E 2 00 0000000000000000000000 "CASHOUT RM2: Dispensing at the outlet is abnormal."
005A 1014_E 2 00 0000000000000000000000 "CASHOUT RM2: Dispensing at the outlet is abnormal."
005A 1015_E 2 00 0000000000000000000000 "CASHOUT RM2: Dispensing at the outlet is abnormal. (The stop
interrupt of the motor doesn`t enter while the motor is stopping.
The motor cannot stop.)"
005A 1016_E 2 00 0000000000000000000000 "CASHOUT RM2: Dispensing at the outlet is abnormal (during
dispensing jam at S2B)."
005A 1017_E 2 00 0000000000000000000000 "CASHOUT RM2: Dispensing at the outlet is abnormal (during
dispensing jam at S2B)."
005A 1031_E 2 00 0000000000000000000000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary
stack unit."
005A 1032_E 2 00 0000000000000000000000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary
stack unit.DM31 stopped because of detection of SW39 ON."
005A 1033_E 2 00 0000000000000000000000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary
stack unit. DM31 stopped because of detection of SW3A ON."
005A 1034_E 2 00 0000000000000000000000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary
stack unit."
005A 1035_E 2 00 0000000000000000000000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary
stack unit."
005A 1036_E 2 00 0000000000000000000000 "CASHOUT RM2: Pressure mechanism abnormal at temporary
stack unit, DM31 ON, but SW3A not ON."
005A 1037_E 2 00 0000000000000000000000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary
stack unit."
005A 1038_E 2 00 0000000000000000000000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary
stack unit. DM31 ON, but SW39 not lighted."
005A 1039_E 2 00 0000000000000000000000 "CASHOUT RM2: Pressure Mechanism at Escrow Unit is
abnormal (DM31 ON, but SW3A not lighted)"
005A 103A_E 2 00 0000000000000000000000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary
stack unit."
005A 103B_E 2 00 0000000000000000000000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary
stack unit."
005A 103C_E 2 00 0000000000000000000000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary
stack unit."
005A 103D_E 2 00 0000000000000000000000 "CASHOUT RM2: DM32 is tried to rotate for reverse direction at
position of shelter, but not rotated."
005A 103E_E 2 00 0000000000000000000000 "CASHOUT RM2: DM32 is tried to rotate for reverse direction at
position of dispensing, but not rotated."
005A 103F_E 2 00 0000000000000000000000 "CASHOUT RM2: DM32 is tried to rotate for reverse direction after
no-dispensing, but not rotated."
005A 1049_E 2 00 0000000000000000000000 "CASHOUT RM2: DM40 not stopped at high-speed rotation or low-
speed rotation."
005A 104A_E 2 00 0000000000000000000000 "CASHOUT RM2: Speed not arrived to 70% of standard-speed
after rotation, retries failed."
005A 104B_E 2 00 0000000000000000000000 "CASHOUT RM2: Speed not arrived to 70% of standard-speed
after rotation, retries failed."
005A 104C_E 2 00 0000000000000000000000 "CASHOUT RM2: Speed dropped down at high-speed rotation or
low-speed rotation."
005A 104D_E 2 00 0000000000000000000000 "CASHOUT RM2: Speed too fast based on standard-speed at
rotation of high-speed or low-speed."
005A 104E_E 2 00 0000000000000000000000 "CASHOUT RM2: Speed too slow based on standard-speed at
rotation of high-speed or low-speed."
005A 104F_E 2 00 0000000000000000000000 "CASHOUT RM2: Speed not arrived to 70% of standard-speed
after rotation at reset transportation, retries failed."
005A 107D_E 2 00 0000000000000000000000 "CASHOUT RM2: DM32 is tried to rotate for normal direction, but
not rotated - DM32 may be locked."

100 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A 107E_E 2 00 0000000000000000000000 "CASHOUT RM2: Rotation of DM32 can not be checked at normal
rotation - DM32 may be locked."
005A 107F_E 2 00 0000000000000000000000 "CASHOUT RM2: DM32 not stopped by stop indication - DM32
may be locked."
005A 10A0_E 2 00 0000000000000000000000 "CASHOUT RM2: Cassette: motor inside cassette A does not turn.
It is tried to start the motor (DMA2) while conveying."
005A 10A1_E 2 00 0000000000000000000000 "CASHOUT RM2: Cassette: motor inside cassette B does not turn.
It is tried to start the motor (DMB2) while conveying."
005A 10A2_E 2 00 0000000000000000000000 "CASHOUT RM2: Cassette: motor inside cassette C does not turn.
It is tried to start the motor (DMC2) while conveying."
005A 10A3_E 2 00 0000000000000000000000 "CASHOUT RM2: Cassette: motor inside cassette D does not turn.
It is tried to start the motor (DMD2) while conveying."
005A 10AE_E 2 00 0000000000000000000000 "CASHOUT RM2: The interrupt of a hard timer did not enter, while
cash-out from cassette A."
005A 10AF_E 2 00 0000000000000000000000 "CASHOUT RM2: It is tried to start the motor (DMA2) while
conveying, but it didn't run."
005A 10BE_E 2 00 0000000000000000000000 "CASHOUT RM2: The interrupt of a hard timer did not enter, while
cash-out from cassette B."
005A 10BF_E 2 00 0000000000000000000000 "CASHOUT RM2: It is tried to start the motor (DMB2) while
conveying, but it didn't run."
005A 10CE_E 2 00 0000000000000000000000 "CASHOUT RM2: The interrupt of a hard timer did not enter, while
cash-out from cassette C."
005A 10CF_E 2 00 0000000000000000000000 "CASHOUT RM2: It is tried to start the motor (DMC2) while
conveying, but it didn't run."
005A 10DE_E 2 00 0000000000000000000000 "CASHOUT RM2: The interrupt of a hard timer did not enter, while
cash-out from cassette D."
005A 10DF_E 2 00 0000000000000000000000 "CASHOUT RM2: It is tried to start the motor (DMD2) while
conveying, but it didn't run."
005A 10E0_E 2 00 0000000000000000000000 "CASHOUT RM2: While in the pressure plate in Outlet Unit
controlled. It is generated according to illegal timing of watch timer
event."
005A 10E1_E 2 00 0000000000000000000000 "CASHOUT RM2: While in the pressure plate in Outlet Unit
controlled. It is generated according to illegal timing of SW11 ON
or OFF event."
005A 10E2_E 2 00 0000000000000000000000 "CASHOUT RM2: While in the pressure plate in Outlet Unit
controlled. It is generated according to illegal timing of SW13 ON
or OFF event."
005A 10E3_E 2 00 0000000000000000000000 "CASHOUT RM2: While in the pressure plate in Outlet Unit
controlled. It is generated according to illegal timing of SW17 ON
or OFF event."
005A 10E4_E 2 00 0000000000000000000000 "CASHOUT RM2: While in the pressure plate in Outlet Unit
controlled. It is generated according to illegal timing of SW18 ON
or OFF event."
005A 10E5_E 2 00 0000000000000000000000 "CASHOUT RM2: While in the pressure plate in Outlet Unit
controlled. It is generated according to illegal timing of SW19 ON
or OFF event."
005A 10E7_E 2 00 0000000000000000000000 "CASHOUT RM2: While in the pressure plate in Outlet Unit
controlled. It is generated according to illegal timing of SW11 watch
time-up event."
005A 10E8_E 2 00 0000000000000000000000 "CASHOUT RM2: While in the pressure plate in Outlet Unit
controlled. It is generated according to illegal timing of SW13 watch
time-up event."
005A 10EA_E 2 00 0000000000000000000000 "CASHOUT RM2: While in the pressure plate in Outlet Unit
controlled. It is generated according to illegal timing of low-
pressure plate watch time-up event."
005A 10EB_E 2 00 0000000000000000000000 "CASHOUT RM2: While in the pressure plate in Outlet Unit
controlled. It is generated according to illegal timing of up-pressure
plate watch time-up event."
005A 10EC_E 2 00 0000000000000000000000 "CASHOUT RM2: While in the pressure plate in Outlet Unit
controlled. It is generated according to illegal timing of PM12 stop
event."
005A 10ED_E 2 00 0000000000000000000000 "CASHOUT RM2: While in the pressure plate in Outlet Unit
controlled, It is generated according to illegal timing of PM19 stop
event."
005A 10EE_E 2 00 0000000000000000000000 "CASHOUT RM2: While in the pressure plate in IN/OUT module
controlled, it is generated according to illegal timing of SW11 and
SW13 watch time-up event."
005A 10EF_E 2 00 0000000000000000000000 "CASHOUT RM2: While in the pressure plate in IN/OUT module
controlled, it is generated according to illegal timing of Feed Moter
phase watch time-up event."
005A 10F0_E 2 00 0000000000000000000000 "CASHOUT RM2: While in the pressure plate in IN/OUT module
controled, after PM12 stops, SW11: as turning on."

U25604-J-Z745-1-7600 May 2011 101

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A 2010_E 2 00 0000000000000000000000 "CASHOUT RM2: DM11 rotated for normal direction, but S16 and
S1A both not shielded - No-dispensing detected for five times."
005A 2020_E 2 00 0000000000000000000000 "CASHOUT RM2: DM18 rotated for normal direction, but S2B not
shielded - No-dispensing detected for five times."
005A 2030_E 2 00 0000000000000000000000 "CASHOUT RM2: DM32 rotated for normal direction, but S33 and
S34 both not shielded -"
005A 20A0_E 2 03 0110000000000000000000 "CASHOUT RM2: Note jam during dispensing in Cassette A."
005A 20A2_E 2 05 0000000000000000000000 "CASHOUT RM2: Running out of notes in Cassette A."
005A 20B0_E 2 03 0000000000000000000000 "CASHOUT RM2: Note jam during dispensing in Cassette B."
005A 20B2_E 2 05 0000000000000000000000 "CASHOUT RM2: Running out of notes in cassette B."
005A 20C0_E 2 03 0000000000000000000000 "CASHOUT RM2: Note jam during dispensing in Cassette C."
005A 20C2_E 2 05 0000000000000000000000 "CASHOUT RM2: Running out of notes in cassette C."
005A 20D0_E 2 03 0000000000000000000000 "CASHOUT RM2: Note jam during dispensing in Cassette D."
005A 20D2_E 2 05 0000000000000000000000 "CASHOUT RM2: Running out of notes in cassette D."
005A 3001_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH down, because length between two notes
is too short at S51. Two notes run into each other, this could
happen during cash-in to ESCROW"
005A 3002_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH down, because length between two notes
is too short at S52. The notes could be slowed down at ESCROW
deflector FL2."
005A 3003_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH down, because length between two Notes
is too short at S44."
005A 3016_E 2 00 0000000000000000000000 "CASHOUT RM2: Sensor shielded more than predefined time Jam
at S16 or S1A. Jam at dispenser slot lower inner tray of I/O
module."
005A 3018_E 2 00 0000000000000000000000 "CASHOUT RM2: Sensor shielded more than predefined time Jam
at S18."
005A 301A_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S16 / S1A and S18. Jam at
dispenser slot lower inner tray of I/O module and path R."
005A 3023_E 2 00 0000000000000000000000 "CASHOUT RM2: Sensor shielded more than predefined time jam
at S23. Jam at input slot of BEB reader."
005A 3027_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S44 and S2B. Jam in path F and
or centralization station."
005A 3028_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S18 and S23. Jam between path
R and BEB reader."
005A 302A_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S68 and S23. Jam in path R."
005A 302B_E 2 00 0000000000000000000000 "CASHOUT RM2: Sensor shielded more than predefined time.
Jam at S2B. Jam in I/O module at dispensing slot inner upper tray."
005A 302C_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at rear of returning stack unit. Jam between
S44 and S23. Jam in path F and or centralization station."
005A 302D_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S68 and S23. Jam in path R."
005A 302E_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S65/S66/S67 and S2B. Jam in
path F, just before input slot upper inner tray of I/O module."
005A 302F_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between path unit (F) and BID unit. Jam
between S60 and S23. Jam in path R between cash-out slot of safe
and BEB reader."
005A 3033_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at S33 or S34. Jam inside of the
ESCROW."
005A 303A_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at rear of temporary stack unit. Jam
between S33/S34 and S53. Jam inside of the ESCROW at the
dispensing slot."
005A 3044_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at of returning stack unit. Jam at S44. Jam
in path F."
005A 3045_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at S45. Jam in path F."
005A 3047_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam in path F under the ESCROW. Jam
between S52 and S44."
005A 304A_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at rear of Outlet Jam between S45 and
S18. Jam in path R."
005A 304B_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at front of returning stack unit. Jam
between S52 and S44. Jam in path F."
005A 304E_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at rear temporary stack unit. Jam between
S53 and S44. Jam in path F, especially under the ESCROW."
005A 304F_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at rear temporary stack unit. Jam between
S51 and S44. Jam in path F."
005A 3050_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at S50. Jam in input slot of ESCROW."
005A 3051_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at S51. Jam in path F at ESCROW output
slot."
005A 3052_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at S52. Jam in path F at ESCROW output
slot."
005A 3053_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at S53. Jam in path F at ESCROW output
slot."

102 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A 3054_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at S54. Jam at safe input transport."
005A 3055_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at S55 Sensor shielded more than
predefined time. Jam at entrance of L2 box."
005A 3058_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S51 and S55."
005A 3059_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S54 and S70. Jam within the rear
safe transport (cash-in to safe)."
005A 305A_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at front of temporary Stack Unit Jam
between S52 and S50. Jam in path F right in front of ESCROW."
005A 305B_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S23 and S51."
005A 305C_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at rear of temporary stack unit. Jam
between S53 and S52."
005A 305D_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at rear of BID. Jam between S51 and S52."
005A 305E_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at rear of BID. Jam between S23 and S52."
005A 305F_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at path unit(R) in front of the entrance of flat
path. Jam between S51 and S54."
005A 3060_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at S60. Jam at safe transport (cash-out
from safe) under I/O module."
005A 3062_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at the entrance of cassette A. Jam at SA0.
Exceeding stipulated time, SA0 had turned ON."
005A 3063_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at the entrance of cassette B. Jam at SB0.
Exceeding stipulated time, SB0 had turned ON."
005A 3064_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at the entrance of cassette C. Jam at SC0.
Exceeding stipulated time, SC0 had turned ON."
005A 3065_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at S65,S66 or S67. Sensor shielded more
than predefined time. Jam at path F near I/O module."
005A 3067_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at the entrance of cssette ID. Jam at SD0.
Exceeding stipulated time, SD0 had turned ON."
005A 3068_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at S68. Sensor shielded more than
predefined time. Jam at path F near I/O module."
005A 306B_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between the exit of flat path and the
entrance of path unit (F). Jam between S79 and S60."
005A 306E_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S44 and S65/S66/S67. Jam in
path F."
005A 306F_E 2 00 0000000000000000000000 "CASHOUT RM2: Half-size media is remained between S16 / S1A
and S65 / S66 / S67. Half of a note stucking between dispensing
slot (cash-in, lower inner tray in I/O module)"
005A 3070_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at S70. Sensor shielded more than
predefined time. *Detected by tray controller."
005A 3071_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at S71. Sensor shielded more than
predefined time. *Detected by tray controller"
005A 3072_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at S72. Sensor shielded more than
predefined time. *Detected by tray controller "
005A 3073_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at S73. Sensor shielded more than
predefined time. *Detected by tray controller"
005A 3074_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at S74. Sensor shielded more than
predefined time. *Detected by tray controller"
005A 3075_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at S75. Sensor shielded more than
predefined time. *Detected by tray controller"
005A 3076_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at S76. Sensor shielded more than
predefined time. *Detected by tray controller"
005A 3077_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at S77. Sensor shielded more than
predefined time. *Detected by tray controller"
005A 3078_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at S78. Sensor shielded more than
predefined time. *Detected by tray controller"
005A 3079_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at S79. Sensor shielded more than
predefined time. *Detected by tray controller"
005A 307A_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S71 and S73 or jam between S72
and S73. *Detected by tray controller"
005A 307B_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S73 and S75 or jam between S74
and S75. *Detected by tray controller"
005A 307C_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S75 and S77 or jam between S76
and S77. *Detected by tray controller"
005A 307D_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S77 and S79 or jam between S78
and S79. *Detected by tray controller"
005A 307E_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S51 and S70. *Detected by tray
controller "
005A 3080_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at SY1. Sensor shielded more than
predefined time. *Detected by tray controller"
005A 3081_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at SY0. Sensor shielded more than
predefined time. *Detected by tray controller"

U25604-J-Z745-1-7600 May 2011 103

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A 3086_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S75 and S76. *Detected by tray
controller."
005A 3087_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S75 and S77. *Detected by tray
controller "
005A 3088_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S77 and S78. *Detected by tray
controller."
005A 3089_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S77 and S79. *Detected by tray
controller "
005A 308A_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S70 and SY1. *Detected by tray
controller "
005A 308B_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S70 and S71. *Detected by tray
controller "
005A 308C_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S71 and S72. *Detected by tray
controller "
005A 308D_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S71 and S73. *Detected by tray
controller "
005A 308E_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S73 and S74. *Detected by tray
controller "
005A 308F_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S73 and S74. *Detected by tray
controller "
005A 3090_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S70 and SY0. *Detected by tray
controller "
005A 30A1_E 2 00 0000000000000000000000 "CASHOUT RM2: Handling of notes slow after BID length between
two notes is too short at S51. *Detected by tray controller"
005A 30A3_E 2 00 0000000000000000000000 "CASHOUT RM2: Handling of notes slow before FL5 length
between two notes is too short at S70 *Detected by tray controller"
005A 30A4_E 2 00 0000000000000000000000 "CASHOUT RM2: Handling of notes slow before FL6 length
between two notes is too short at S71 *Detected by tray controller"
005A 30A5_E 2 00 0000000000000000000000 "CASHOUT RM2: Handling of notes slow before FL7 length
between two notes is too short at S72 *Detected by tray controller"
005A 30A6_E 2 00 0000000000000000000000 "CASHOUT RM2: Length between two notes is too short at S73.
Handling of notes slow before FL8."
005A 4016_E 2 00 0000000000000000000000 "CASHOUT RM2: S16 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal."
005A 4018_E 2 00 0000000000000000000000 "CASHOUT RM2: S18 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal."
005A 401A_E 2 00 0000000000000000000000 "CASHOUT RM2: S1A shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal."
005A 4023_E 2 00 0000000000000000000000 "CASHOUT RM2: S23 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal."
005A 402B_E 2 00 0000000000000000000000 "CASHOUT RM2: S2B shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal."
005A 402C_E 2 00 0000000000000000000000 "CASHOUT RM2: FL3 returned to home position, but S65, S66,
S67 shielded."
005A 402D_E 2 00 0000000000000000000000 "CASHOUT RM2: FL3 returned to opposite position, but S23
shielded."
005A 4033_E 2 00 0000000000000000000000 "CASHOUT RM2: S33 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal."
005A 4034_E 2 00 0000000000000000000000 "CASHOUT RM2: S34 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal."
005A 4044_E 2 00 0000000000000000000000 "CASHOUT RM2: S44 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal."
005A 4045_E 2 00 0000000000000000000000 "CASHOUT RM2: S45 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal."
005A 404C_E 2 00 0000000000000000000000 "CASHOUT RM2: FL2 returned to opposite position, but S44
shielded."
005A 4050_E 2 00 0000000000000000000000 "CASHOUT RM2: S50 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal."
005A 4051_E 2 00 0000000000000000000000 "CASHOUT RM2: S51 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal."
005A 4052_E 2 00 0000000000000000000000 "CASHOUT RM2: S52 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal."
005A 4053_E 2 00 0000000000000000000000 "CASHOUT RM2: S53 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal."
005A 4054_E 2 00 0000000000000000000000 "CASHOUT RM2: S54 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal."
005A 4055_E 2 00 0000000000000000000000 "CASHOUT RM2: S55 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal."
005A 405A_E 2 00 0000000000000000000000 "CASHOUT RM2: FL1 returned to opposite position, but S51
shielded."

104 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A 405B_E 2 00 0000000000000000000000 "CASHOUT RM2: FL2 returned to home position, but S50
shielded."
005A 405C_E 2 00 0000000000000000000000 "CASHOUT RM2: FL1 returned to home position, but S54
shielded."
005A 405D_E 2 00 0000000000000000000000 "CASHOUT RM2: FL10 returned to home position, but S55
shielded."
005A 405E_E 2 00 0000000000000000000000 "CASHOUT RM2: FL10 returned to opposite position, but S54
shielded."
005A 4060_E 2 00 0000000000000000000000 "CASHOUT RM2: S60 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal."
005A 4065_E 2 00 0000000000000000000000 "CASHOUT RM2: S65 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal."
005A 4066_E 2 00 0000000000000000000000 "CASHOUT RM2: S66 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal."
005A 4067_E 2 00 0000000000000000000000 "CASHOUT RM2: S67 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal."
005A 4068_E 2 00 0000000000000000000000 "CASHOUT RM2: S68 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal."
005A 4070_E 2 00 0000000000000000000000 "CASHOUT RM2: S70 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal."
005A 4071_E 2 00 0000000000000000000000 "CASHOUT RM2: S71 shielded at transportation: it must not be
shielded - media may be remained or Sensor is abnormal.
*Detected by tray controller"
005A 4072_E 2 00 0000000000000000000000 "CASHOUT RM2: S72 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal.
*Detected by tray controller"
005A 4073_E 2 00 0000000000000000000000 "CASHOUT RM2: S73 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal.
*Detected by tray controller"
005A 4074_E 2 00 0000000000000000000000 "CASHOUT RM2: S74 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal.
*Detected by tray controller"
005A 4075_E 2 00 0000000000000000000000 "CASHOUT RM2: S75 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal.
*Detected by tray controller"
005A 4076_E 2 00 0000000000000000000000 "CASHOUT RM2: S76 unexpected shielded."
005A 4077_E 2 00 0000000000000000000000 "CASHOUT RM2: S77 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal.
*Detected by tray controller"
005A 4078_E 2 00 0000000000000000000000 "CASHOUT RM2: S78 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal.
*Detected by tray controller "
005A 4079_E 2 00 0000000000000000000000 "CASHOUT RM2: S79 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal.
*Detected by tray controller "
005A 407B_E 2 00 0000000000000000000000 "CASHOUT RM2: FL4 returned to opposite position, but S70
shielded."
005A 4080_E 2 00 0000000000000000000000 "CASHOUT RM2: SY1 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal.
*Detected by tray controller"
005A 4081_E 2 00 0000000000000000000000 "CASHOUT RM2: SY0 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal.
*Detected by tray controller "
005A 408B_E 2 00 0000000000000000000000 "CASHOUT RM2: FL11 returned to opposite position, but S70
shielded."
005A 5004_E 2 00 0000000000000000000000 "CASHOUT RM2: Note remained in outlet S2C shielded."
005A 5005_E 2 00 0000000000000000000000 "CASHOUT RM2: Note remained in outlet S1A shielded."
005A 5006_E 2 00 0000000000000000000000 "CASHOUT RM2: Note remained in outlet S2D shielded."
005A 500C_E 2 00 0000000000000000000000 "CASHOUT RM2: Note remained in outlet S2C shielded."
005A 5010_E 2 00 0000000000000000000000 "CASHOUT RM2: S10 shielded "
005A 5012_E 2 00 0000000000000000000000 "CASHOUT RM2: S12 shielded "
005A 5014_E 2 00 0000000000000000000000 "CASHOUT RM2: S14 shielded"
005A 5015_E 2 00 0000000000000000000000 "CASHOUT RM2: S15 shielded"
005A 5016_E 2 00 0000000000000000000000 "CASHOUT RM2: S16 shielded "
005A 5018_E 2 00 0000000000000000000000 "CASHOUT RM2: S18 shielded "
005A 501C_E 2 00 0000000000000000000000 "CASHOUT RM2: One of S10 - S14 shielded before transpor-
tation."
005A 501D_E 2 00 0000000000000000000000 "CASHOUT RM2: Wrinkled note remained in outlet."
005A 501E_E 2 00 0000000000000000000000 "CASHOUT RM2: One of S10 - S15 shielded."

U25604-J-Z745-1-7600 May 2011 105

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A 501F_E 2 00 0000000000000000000000 "CASHOUT RM2: Bucket or pressure plate not set at position of
insertion at status sense (idling sense) or sense of insertion/taking-
out."
005A 5023_E 2 00 0000000000000000000000 "CASHOUT RM2: S23 shielded "
005A 5028_E 2 00 0000000000000000000000 "CASHOUT RM2: SW18 lighted shutter has not closed."
005A 5029_E 2 00 0000000000000000000000 "CASHOUT RM2: SW19 shielded shutter has not closed."
005A 502A_E 2 00 0000000000000000000000 "CASHOUT RM2: SW17 shielded shutter has not closed."
005A 502B_E 2 00 0000000000000000000000 "CASHOUT RM2: S2B shielded "
005A 5033_E 2 00 0000000000000000000000 "CASHOUT RM2: S33 shielded"
005A 5034_E 2 00 0000000000000000000000 "CASHOUT RM2: S34 shielded"
005A 5035_E 2 00 0000000000000000000000 "CASHOUT RM2: S35 Shielded"
005A 5038_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes remained in temporary stack Unit before
transportation. One of S30 - S32"
005A 503A_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes can not be collected, because some part
of notes are already out of temporary stack unit."
005A 503E_E 2 00 0000000000000000000000 "CASHOUT RM2: One of S30 - S32 shielded"
005A 5040_E 2 00 0000000000000000000000 "CASHOUT RM2: S40 shielded"
005A 5044_E 2 00 0000000000000000000000 "CASHOUT RM2: S44 shielded "
005A 5045_E 2 00 0000000000000000000000 "CASHOUT RM2: S45 shielded "
005A 5046_E 2 00 0000000000000000000000 "CASHOUT RM2: S46 shielded"
005A 5048_E 2 00 0000000000000000000000 "CASHOUT RM2: Returning Stack Unit tilted SW48 lighted."
005A 5049_E 2 00 0000000000000000000000 "CASHOUT RM2: SW49 lighted"
005A 504A_E 2 00 0000000000000000000000 "CASHOUT RM2: S49 shielded"
005A 504C_E 2 00 0000000000000000000000 "CASHOUT RM2: S4C shielded"
005A 504E_E 2 00 0000000000000000000000 "CASHOUT RM2: One of S1B,S1D,S1F,S2A shielded."
005A 5050_E 2 00 0000000000000000000000 "CASHOUT RM2: S50 shielded "
005A 5051_E 2 00 0000000000000000000000 "CASHOUT RM2: S51 shielded "
005A 5052_E 2 00 0000000000000000000000 "CASHOUT RM2: S52 shielded "
005A 5053_E 2 00 0000000000000000000000 "CASHOUT RM2: S53 shielded"
005A 5054_E 2 00 0000000000000000000000 "CASHOUT RM2: S54 shielded "
005A 5055_E 2 00 0000000000000000000000 "CASHOUT RM2: S55 shielded "
005A 5056_E 2 00 0000000000000000000000 "CASHOUT RM2: S56 shielded "
005A 5058_E 2 00 0000000000000000000000 "CASHOUT RM2: SW58 lighted"
005A 5059_E 2 00 0000000000000000000000 "CASHOUT RM2: SW59 shielded"
005A 505C_E 2 00 0000000000000000000000 "CASHOUT RM2: SW5C shielded"
005A 505F_E 2 00 0000000000000000000000 "CASHOUT RM2: Signal of PLSW (safety switch) between head
unit and safe unit might be cut."
005A 5060_E 2 00 0000000000000000000000 "CASHOUT RM2: S60 shielded "
005A 5065_E 2 00 0000000000000000000000 "CASHOUT RM2: S65 shielded "
005A 5066_E 2 00 0000000000000000000000 "CASHOUT RM2: S66 shielded "
005A 5067_E 2 00 0000000000000000000000 "CASHOUT RM2: S67 shielded "
005A 5068_E 2 00 0000000000000000000000 "CASHOUT RM2: S68 shielded "
005A 506F_E 2 00 0000000000000000000000 "CASHOUT RM2: Pass(F) tilted (SW49 lighted) "
005A 5070_E 2 00 0000000000000000000000 "CASHOUT RM2: S70 shielded "
005A 5071_E 2 00 0000000000000000000000 "CASHOUT RM2: S71 shielded "
005A 5072_E 2 00 0000000000000000000000 "CASHOUT RM2: S72 shielded "
005A 5073_E 2 00 0000000000000000000000 "CASHOUT RM2: S73 shielded."
005A 5074_E 2 00 0000000000000000000000 "CASHOUT RM2: S74 shielded "
005A 5075_E 2 00 0000000000000000000000 "CASHOUT RM2: S75 shielded "
005A 5076_E 2 00 0000000000000000000000 "CASHOUT RM2: S76 shielded "
005A 5077_E 2 00 0000000000000000000000 "CASHOUT RM2: S77 shielded "
005A 5078_E 2 00 0000000000000000000000 "CASHOUT RM2: S78 shielded "
005A 5079_E 2 00 0000000000000000000000 "CASHOUT RM2: S79 shielded "
005A 5080_E 2 00 0000000000000000000000 "CASHOUT RM2: SY0 shielded "
005A 5081_E 2 00 0000000000000000000000 "CASHOUT RM2: SY1 shielded "
005A 5082_E 2 00 0000000000000000000000 "CASHOUT RM2: SY2 shielded "
005A 508F_E 2 00 0000000000000000000000 "CASHOUT RM2: Cassette not installed or IrDA abnormal."
005A 5090_E 2 00 0000000000000000000000 "CASHOUT RM2: Retract Cassette not installed."
005A 509A_E 2 00 0000000000000000000000 "CASHOUT RM2: SW9A lighted "
005A 509B_E 2 00 0000000000000000000000 "CASHOUT RM2: SW9B lighted "
005A 509C_E 2 00 0000000000000000000000 "CASHOUT RM2: SW9C lighted "
005A 50A0_E 2 00 0000000000000000000000 "CASHOUT RM2: Both SA0 and SA1 shielded."
005A 50AA_E 2 00 0000000000000000000000 "CASHOUT RM2: Media may be remained in cassette A or sensor
is abnormal. *Detected by tray controller"
005A 50AC_E 2 00 0000000000000000000000 "CASHOUT RM2: Media may be remained in cassette A or sensor
is abnormal. *Detected by tray controller"

106 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A 50AE_E 2 00 0000000000000000000000 "CASHOUT RM2: If cassette is empty, SA4 or SWAE may be
abnormal."
005A 50B0_E 2 00 0000000000000000000000 "CASHOUT RM2: Both SB0 and SB1 shielded "
005A 50BA_E 2 00 0000000000000000000000 "CASHOUT RM2: Media may be remained in cassette B or sensor
is abnormal. *Detected by tray controller"
005A 50BC_E 2 00 0000000000000000000000 "CASHOUT RM2: Media may be remained in cassette B or sensor
is abnormal. *Detected by tray controller"
005A 50BE_E 2 00 0000000000000000000000 "CASHOUT RM2: If cassette is empty, SB4 or SWBE may be
abnormal."
005A 50C0_E 2 00 0000000000000000000000 "CASHOUT RM2: Both SC0 and SC1 shielded."
005A 50CA_E 2 00 0000000000000000000000 "CASHOUT RM2: Media may be remained in cassette C or sensor
is abnormal. *Detected by tray controller"
005A 50CC_E 2 00 0000000000000000000000 "CASHOUT RM2: Media may be remained in cassette C or sensor
is abnormal. *Detected by tray controller"
005A 50CE_E 2 00 0000000000000000000000 "CASHOUT RM2: If cassette is empty, SC4 or SWCE may be
abnormal."
005A 50D0_E 2 00 0000000000000000000000 "CASHOUT RM2: Both SD0 and SD1 shielded."
005A 50DA_E 2 00 0000000000000000000000 "CASHOUT RM2: Media may be remained in cassette D or sensor
is abnormal. *Detected by tray controller"
005A 50DC_E 2 00 0000000000000000000000 "CASHOUT RM2: Media may be left in place in cassette D or
sensor SWDC is abnormal."
005A 50DE_E 2 00 0000000000000000000000 "CASHOUT RM2: If cassette is empty, SD4 or SWDE may be
abnormal."
005A 50E0_E 2 00 0000000000000000000000 "CASHOUT RM2: SE0 shielded "
005A 50EA_E 2 00 0000000000000000000000 "CASHOUT RM2: Media may be remained in reject cassette or
sensor is abnormal. *Detected by tray controller"
005A 50EC_E 2 00 0000000000000000000000 "CASHOUT RM2: Media may be remained in reject cassette or
sensor is abnormal. *Detected by tray controller"
005A 50F1_E 2 00 0000000000000000000000 "CASHOUT RM2: SWAE lighted"
005A 50F2_E 2 00 0000000000000000000000 "CASHOUT RM2: SWBE lighted"
005A 50F3_E 2 00 0000000000000000000000 "CASHOUT RM2: SWCE lighted"
005A 50F4_E 2 00 0000000000000000000000 "CASHOUT RM2: SWDE lighted"
005A 50FD_E 2 00 0000000000000000000000 "CASHOUT RM2: SY0 shielded. Jam in front of reject cassette."
005A 50FE_E 2 00 0000000000000000000000 "CASHOUT RM2: SY1 shielded "
005A 50FF_E 2 00 0000000000000000000000 "CASHOUT RM2: A command was received while the indicator
was ON so that the tray can be pulled out, or while accessing the
Tray Sensor SW9E, reading the cassette's"
005A 6003_E 2 00 0000000000000000000000 "CASHOUT RM2: S14 not lighted at lighting/shielding for sensor
level during automatic adjustment."
005A 6004_E 2 00 0000000000000000000000 "CASHOUT RM2: S15 not lighted at lighting/shielding for sensor
level during automatic adjustment."
005A 6007_E 2 00 0000000000000000000000 "CASHOUT RM2: S1F not lighted at lighting/shielding for sensor
level during automatic adjustment."
005A 6008_E 2 00 0000000000000000000000 "CASHOUT RM2: S2A not lighted at lighting/shielding for sensor
level during automatic adjustment."
005A 6009_E 2 00 0000000000000000000000 "CASHOUT RM2: S2C not lighted at lighting/shielding for sensor
level during automatic adjustment."
005A 600A_E 2 00 0000000000000000000000 "CASHOUT RM2: S2D not lighted at lighting/shielding for sensor
level during automatic adjustment."
005A 600B_E 2 00 0000000000000000000000 "CASHOUT RM2: S2E not lighted at lighting/shielding for sensor
level during automatic adjustment."
005A 6020_E 2 00 0000000000000000000000 "CASHOUT RM2: FRU device data of cassette A is abnormal."
005A 6021_E 2 00 0000000000000000000000 "CASHOUT RM2: FRU device data of cassette B is abnormal."
005A 6022_E 2 00 0000000000000000000000 "CASHOUT RM2: FRU device data of cassette C is abnormal."
005A 6023_E 2 00 0000000000000000000000 "CASHOUT RM2: FRU device data of cassette D is abnormal."
005A 6024_E 2 00 0000000000000000000000 "CASHOUT RM2: FRU device data of rejection unit is abnormal."
005A 6026_E 2 00 0000000000000000000000 "CASHOUT RM2: Automatic adjustment for one of S10 - S16 not
completed - detected at Power ON."
005A 6027_E 2 00 0000000000000000000000 "CASHOUT RM2: Automatic adjustment for DM11 not completed -
detected at Power ON."
005A 602A_E 2 00 0000000000000000000000 "CASHOUT RM2: SUM check abnormal for FRU device. Mapping
data abnormal or mapping not executed."
005A 602B_E 2 00 0000000000000000000000 "CASHOUT RM2: SUM check abnormal for FRU device. Mapping
data abnormal or mapping not executed."
005A 602C_E 2 00 0000000000000000000000 "CASHOUT RM2: SUM check abnormal for FRU device. Mapping
data abnormal or mapping not executed."
005A 602D_E 2 00 0000000000000000000000 "CASHOUT RM2: SUM check abnormal for FRU device. Mapping
data abnormal or mapping not executed."
005A 602E_E 2 00 0000000000000000000000 "CASHOUT RM2: SUM check abnormal for FRU device. Mapping
data abnormal or mapping not executed."

U25604-J-Z745-1-7600 May 2011 107

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A 602F_E 2 00 0000000000000000000000 "CASHOUT RM2: Cassette ID or SUM of denomination infor-

mation abnormal."
005A 6030_E 2 00 0000000000000000000000 "CASHOUT RM2: SW38 not shielded at rotation of PM30 - SW38
broken or PM30 abnormal."
005A 6031_E 2 00 0000000000000000000000 "CASHOUT RM2: SW38 not lighted at rotation of PM30 - SW38
broken or PM30 abnormal."
005A 6032_E 2 00 0000000000000000000000 "CASHOUT RM2:
EBH_EXT_ESCROW_PM30_SPEED_NOT_COMPLETED"
005A 6033_E 2 00 0000000000000000000000 "CASHOUT RM2: Speed of PM30 not completed slow down or fast
up - case 2."
005A 6037_E 2 00 0000000000000000000000 "CASHOUT RM2: S30 not lighted at lighting/shielding for sensor
level during automatic adjustment."
005A 6038_E 2 00 0000000000000000000000 "CASHOUT RM2: S31 not lighted at lighting/shielding for sensor
level during automatic adjustment."
005A 6039_E 2 00 0000000000000000000000 "CASHOUT RM2: S32 not lighted at lighting/shielding for sensor
level during automatic adjustment."
005A 603A_E 2 00 0000000000000000000000 "CASHOUT RM2: DM32 not rotated at low-speed rotation or
rotated too fast for predefined speed."
005A 603B_E 2 00 0000000000000000000000 "CASHOUT RM2: DM32 not rotated for predefined speed."
005A 603C_E 2 00 0000000000000000000000 "CASHOUT RM2: DM32 not stopped by stop indication."
005A 603D_E 2 00 0000000000000000000000 "CASHOUT RM2: Automatic adjustment of DM32 executed, but
speed too fast for predefined or adjustment invalid."
005A 603E_E 2 00 0000000000000000000000 "CASHOUT RM2: Automatic adjustment of DM32 executed, but
speed too slow for predefined or adjustment invalid."
005A 603F_E 2 00 0000000000000000000000 "CASHOUT RM2: DM32 ON, but motor not rotated - DM32
locked."
005A 604F_E 2 00 0000000000000000000000 "CASHOUT RM2: DM40 ON, but Motor not rotated."
005A 6060_E 2 00 0000000000000000000000 "CASHOUT RM2: Timed-up before completion of speed-up/down
for PM30."
005A 6061_E 2 00 0000000000000000000000 "CASHOUT RM2: S35 shielded after completion of dispensing."
005A 6080_E 2 00 0000000000000000000000 "CASHOUT RM2: SWEB and SWEC both ON, one of switches
broken."
005A 6081_E 2 00 0000000000000000000000 "CASHOUT RM2: SWE9 and SWEA both not ON, but SWEA ON,
one of switches broken."
005A 6082_E 2 00 0000000000000000000000 "CASHOUT RM2: Pressure mechanism abnormal at reject
cassette. PME1=ON, but SWEC=OFF."
005A 6083_E 2 00 0000000000000000000000 "CASHOUT RM2: PME1 ON, but SWE9 still ON."
005A 6084_E 2 00 0000000000000000000000 "CASHOUT RM2: PME1 ON, but SWEB still ON."
005A 6085_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH_EXT_CASSETTE_SWEC"
005A 6086_E 2 00 0000000000000000000000 "CASHOUT RM2: PME1 ON, and SWEC not ON, but SWE9 ON.
*Detected by tray controller"
005A 6087_E 2 00 0000000000000000000000 "CASHOUT RM2: DME2 ON, but not rotated."
005A 6088_E 2 00 0000000000000000000000 "CASHOUT RM2: Althougth it is full, SWEA did not turn OFF even
one time"
005A 6089_E 2 00 0000000000000000000000 "CASHOUT RM2: PME1 time-out."
005A 608A_E 2 00 0000000000000000000000 "CASHOUT RM2: SE0 ON."
005A 608B_E 2 00 0000000000000000000000 "CASHOUT RM2: The stat of the sensor is contradicted
(SWEC=ON SWEB OFF SWEA OFF SWE9 ON)."
005A 608C_E 2 00 0000000000000000000000 "CASHOUT RM2: The stat of the sensor is contradicted
(SWEC=OFF SWEB ON SWEA OFF SWE9 OFF)."
005A 6090_E 2 00 0000000000000000000000 "CASHOUT RM2: SUM Check abnormal for FRU Device. Mapping
data abnormal or mapping not executed."
005A 6091_E 2 00 0000000000000000000000 "CASHOUT RM2: Data written into FRU Device of Base Unit, but
Data not same after Read "
005A 6092_E 2 00 0000000000000000000000 "CASHOUT RM2: Data not written during predefined time - FRU
broken or Wiring abnormal "
005A 6095_E 2 00 0000000000000000000000 "CASHOUT RM2: PLSW OFF. One interlock switch open."
005A 6096_E 2 00 0000000000000000000000 "CASHOUT RM2: Pin installed for WDT. Jumper on mainboard
installed for debugging, should be off."
005A 6097_E 2 00 0000000000000000000000 "CASHOUT RM2: IOP not cut for tray controller. Problem in safe,
power off for motors."
005A 6098_E 2 00 0000000000000000000000 "CASHOUT RM2: IOP not cut for EBH Controller. Problem in
mainunit, power off for motors."
005A 6099_E 2 00 0000000000000000000000 "CASHOUT RM2: BID can not be initialized."
005A 609A_E 2 00 0000000000000000000000 "CASHOUT RM2: IOPTH is not OFF for tray controller. Tray
contoller switches off mainboard due to a problem."
005A 609B_E 2 00 0000000000000000000000 "CASHOUT RM2: IOPis not OFF for EBH controller. Mainboard
switches off tray controller due to a problem."
005A 609C_E 2 00 0000000000000000000000 "CASHOUT RM2: Metal detection can not be initialized, Change I/
O module."

108 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A 60A0_E 2 00 0000000000000000000000 "CASHOUT RM2: SWAB and SWAC both ON ,one of switches
broken."
005A 60A1_E 2 00 0000000000000000000000 "CASHOUT RM2: SWA9 and SWAA both not ON, but SWAA ON,
one of switches broken."
005A 60A2_E 2 00 0000000000000000000000 "CASHOUT RM2: PMA1 ON, but SWAC not ON."
005A 60A3_E 2 00 0000000000000000000000 "CASHOUT RM2: PMA1 ON, but SWA9 still ON. *Detected by tray
controller "
005A 60A4_E 2 00 0000000000000000000000 "CASHOUT RM2: PMA1 ON, but SWA9 still ON."
005A 60A5_E 2 00 0000000000000000000000 "CASHOUT RM2: PMA1 ON, but SWAC not ON."
005A 60A6_E 2 00 0000000000000000000000 "CASHOUT RM2: PMA1 ON, and SWAC not ON, but SWA9 ON."
005A 60A7_E 2 00 0000000000000000000000 "CASHOUT RM2: DMA2 ON, but not rotated, Detected by tray
controller, and detected by EBH controller during diagnostic test."
005A 60A8_E 2 00 0000000000000000000000 "CASHOUT RM2: Althougth it is full, SWAA did not turn OFF even
one time."
005A 60A9_E 2 00 0000000000000000000000 "CASHOUT RM2: PMB1 time-out, detected by tray controller."
005A 60AA_E 2 00 0000000000000000000000 "CASHOUT RM2: SB0 ON. *Detected by tray controller"
005A 60AB_E 2 00 0000000000000000000000 "CASHOUT RM2: The stat of the sensor is contradicted
(SWEC=ON SWEB OFF SWEA OFF SWE9 ON)."
005A 60AC_E 2 00 0000000000000000000000 "CASHOUT RM2: The stat of the sensor is contradicted
(SWEC=OFF SWEB ON SWEA OFF SWE9 OFF."
005A 60B0_E 2 00 0000000000000000000000 "CASHOUT RM2: SWBB and SWBC both ON."
005A 60B1_E 2 00 0000000000000000000000 "CASHOUT RM2: SWB9 and SWBA both not ON, but SWBA ON,
one of switches broken."
005A 60B2_E 2 00 0000000000000000000000 "CASHOUT RM2: PMB1 ON, but SWBC not ON."
005A 60B3_E 2 00 0000000000000000000000 "CASHOUT RM2: PMB1 ON, but SWB9 still ON."
005A 60B4_E 2 00 0000000000000000000000 "CASHOUT RM2: PMB1 ON, but SWBB still ON."
005A 60B5_E 2 00 0000000000000000000000 "CASHOUT RM2: PMB1 ON, but SWBC not ON."
005A 60B6_E 2 00 0000000000000000000000 "CASHOUT RM2: PMB1 ON, and SWBC not ON, but SWB9 ON."
005A 60B7_E 2 00 0000000000000000000000 "CASHOUT RM2: DMB2 ON, but not rotated."
005A 60B8_E 2 00 0000000000000000000000 "CASHOUT RM2: Althougth it is full, SWBB did not turn OFF even
one time."
005A 60B9_E 2 00 0000000000000000000000 "CASHOUT RM2: PMB1 time-out."
005A 60BA_E 2 00 0000000000000000000000 "CASHOUT RM2: SB0 ON."
005A 60BB_E 2 00 0000000000000000000000 "CASHOUT RM2: The state of the sensor is contradicted
(SWEC=ON SWEB OFF SWEA OFF SWE9 ON)"
005A 60BC_E 2 00 0000000000000000000000 "CASHOUT RM2: The stat of the sensor is contradicted
(SWEC=OFF SWEB ON SWEA OFF SWE9 OFF)"
005A 60C0_E 2 00 0000000000000000000000 "CASHOUT RM2: SWCB and SWCC both ON - one of switches
broken."
005A 60C1_E 2 00 0000000000000000000000 "CASHOUT RM2: SWC9 and SWCA both not ON, but SWCA ON,
one of switches broken."
005A 60C2_E 2 00 0000000000000000000000 "CASHOUT RM2: PMC1 ON, but SWCC not ON."
005A 60C3_E 2 00 0000000000000000000000 "CASHOUT RM2: PMC1 ON, but SWC9 still ON."
005A 60C4_E 2 00 0000000000000000000000 "CASHOUT RM2: PMC1 ON, but SWCB still ON."
005A 60C5_E 2 00 0000000000000000000000 "CASHOUT RM2: PMC1 ON, but SWCC not ON"
005A 60C6_E 2 00 0000000000000000000000 "CASHOUT RM2: PMC1 ON, and SWCC not ON, but SWC9 ON."
005A 60C7_E 2 00 0000000000000000000000 "CASHOUT RM2: DMC2 ON, but not rotated."
005A 60C8_E 2 00 0000000000000000000000 "CASHOUT RM2: Althougth it is full, SWCC did not turn OFF even
one time."
005A 60C9_E 2 00 0000000000000000000000 "CASHOUT RM2: PMC1 time-out."
005A 60CA_E 2 00 0000000000000000000000 "CASHOUT RM2: SC0 ON."
005A 60CB_E 2 00 0000000000000000000000 "CASHOUT RM2: The stat of the sensor is contradicted
(SWEC=ON SWEB OFF SWEA OFF SWE9 ON)."
005A 60CC_E 2 00 0000000000000000000000 "CASHOUT RM2: The stat of the sensor is contradicted
(SWEC=OFF SWEB ON SWEA OFF SWE9 OFF)"
005A 60D0_E 2 00 0000000000000000000000 "CASHOUT RM2: SWDB and SWDC both ON, one of switches
broken."
005A 60D1_E 2 00 0000000000000000000000 "CASHOUT RM2: SWD9 and SWDA both not ON, but SWDA ON,
one of switches broken."
005A 60D2_E 2 00 0000000000000000000000 "CASHOUT RM2: PMD1 ON, but SWDC not ON."
005A 60D3_E 2 00 0000000000000000000000 "CASHOUT RM2: PMD1 ON, but SWD9 still ON."
005A 60D4_E 2 00 0000000000000000000000 "CASHOUT RM2: PMD1 ON, but SWDB still ON."
005A 60D5_E 2 00 0000000000000000000000 "CASHOUT RM2: PMD1 ON, but SWDC not ON."
005A 60D6_E 2 00 0000000000000000000000 "CASHOUT RM2: PMD1 ON, and SWDC not ON, but SWC9 ON."
005A 60D7_E 2 00 0000000000000000000000 "CASHOUT RM2: DMD2 ON, but not rotated."
005A 60D8_E 2 00 0000000000000000000000 "CASHOUT RM2: Althougth it is full, SWDD did not turn OFF even
one time."
005A 60D9_E 2 00 0000000000000000000000 "CASHOUT RM2: PMD1 time-out."

U25604-J-Z745-1-7600 May 2011 109

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A 60DA_E 2 00 0000000000000000000000 "CASHOUT RM2: SD0 ON."

005A 60DB_E 2 00 0000000000000000000000 "CASHOUT RM2: The stat of the sensor is contradicted
(SWEC=OFF SWEB ON SWEA OFF SWE9 OFF)."
005A 60DC_E 2 00 0000000000000000000000 "CASHOUT RM2: Inconsistent sensor status (SWD9=OFF
SWDB=ON SWDC=OFF SWDA=OFF)."
005A 60E0_E 2 00 0000000000000000000000 "CASHOUT RM2: Media indication abnormal for cassette A."
005A 60E1_E 2 00 0000000000000000000000 "CASHOUT RM2: Media indication abnormal for cassette B."
005A 60E2_E 2 00 0000000000000000000000 "CASHOUT RM2: Media indication abnormal for cassette C."
005A 60E3_E 2 00 0000000000000000000000 "CASHOUT RM2: Media indication abnormal for cassette D."
005A 60E5_E 2 00 0000000000000000000000 "CASHOUT RM2: Media indication abnormal for reject cassette."
005A 60E7_E 2 00 0000000000000000000000 "CASHOUT RM2: Adjustment value set out of range for store unit
F."
005A 60E8_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination information abnormal for reject
cassette."
005A 60E9_E 2 00 0000000000000000000000 "CASHOUT RM2: Rotation mechanism abnormal: at the reject
cassette."
005A 60ED_E 2 00 0000000000000000000000 "CASHOUT RM2: Media indication abnormal for collection
cassette."
005A 60F0_E 2 00 0000000000000000000000 "CASHOUT RM2: S35 not lighted at lighting/shielding for sensor
level during automatic adjustment."
005A 60F1_E 2 00 0000000000000000000000 "CASHOUT RM2: Adjustment values not correct for outlet,
temporary stack unit and returning stack unit."
005A 60F2_E 2 00 0000000000000000000000 "CASHOUT RM2: Adjustment values not set out of range for outlet,
temporary stack unit and returning stack unit."
005A 60F7_E 2 00 0000000000000000000000 "CASHOUT RM2: Adjustment value set out of range for store unit
A."
005A 60F8_E 2 00 0000000000000000000000 "CASHOUT RM2: Adjustment value set out of range for store unit
B."
005A 60F9_E 2 00 0000000000000000000000 "CASHOUT RM2: Adjustment value set out of range for store unit
C."
005A 60FA_E 2 00 0000000000000000000000 "CASHOUT RM2: Adjustment value set out of range for store unit
D."
005A 60FB_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination information abnormal for
Ccssette A."
005A 60FC_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination information abnormal for
cassette B."
005A 60FD_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination information abnormal for
cassette C."
005A 60FE_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination information abnormal for
cassette D."
005A 60FF_E 2 00 0000000000000000000000 "CASHOUT RM2: Serial no. of production duplicated."
005A 7010_E 2 00 0000000000000000000000 "CASHOUT RM2: S10 abnormal. Power OFF, but sensor still
lighted."
005A 7012_E 2 00 0000000000000000000000 "CASHOUT RM2: S12 abnormal. Power OFF, but sensor still
lighted."
005A 7014_E 2 00 0000000000000000000000 "CASHOUT RM2: S14 abnormal. Power OFF, but sensor still
lighted."
005A 7015_E 2 00 0000000000000000000000 "CASHOUT RM2: S15 abnormal. Power OFF, but sensor still
lighted."
005A 7016_E 2 00 0000000000000000000000 "CASHOUT RM2: S16 abnormal. Power OFF, but sensor still
lighted."
005A 701A_E 2 00 0000000000000000000000 "CASHOUT RM2: S1A abnormal. Power OFF, but sensor still
lighted."
005A 701B_E 2 00 0000000000000000000000 "CASHOUT RM2: S1B abnormal. Power OFF, but sensor still
lighted."
005A 701D_E 2 00 0000000000000000000000 "CASHOUT RM2: S1D abnormal. Power OFF, but sensor still
lighted."
005A 701F_E 2 00 0000000000000000000000 "CASHOUT RM2: S1F abnormal. Power OFF, but sensor still
lighted."
005A 7023_E 2 00 0000000000000000000000 "CASHOUT RM2: S23 abnormal. Power OFF, but sensor still
lighted."
005A 702A_E 2 00 0000000000000000000000 "CASHOUT RM2: S2A abnormal. Power OFF, but sensor still
lighted."
005A 702B_E 2 00 0000000000000000000000 "CASHOUT RM2: S2B abnormal. Power OFF, but sensor still
lighted."
005A 702C_E 2 00 0000000000000000000000 "CASHOUT RM2: S2C abnormal. Power OFF, but sensor still
lighted."
005A 702D_E 2 00 0000000000000000000000 "CASHOUT RM2: S2D abnormal. Power OFF, but sensor still
lighted."
005A 702E_E 2 00 0000000000000000000000 "CASHOUT RM2: S2E abnormal. Power OFF, but sensor still
lighted."

110 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A 7030_E 2 00 0000000000000000000000 "CASHOUT RM2: S30 abnormal. Power OFF, but sensor still
lighted."
005A 7031_E 2 00 0000000000000000000000 "CASHOUT RM2: S31 abnormal. Power OFF, but sensor still
lighted."
005A 7032_E 2 00 0000000000000000000000 "CASHOUT RM2: S32 abnormal. Power OFF, but sensor still
lighted."
005A 7033_E 2 00 0000000000000000000000 "CASHOUT RM2: S33 abnormal. Power OFF, but sensor still
lighted."
005A 7034_E 2 00 0000000000000000000000 "CASHOUT RM2: S34 abnormal. Power OFF, but sensor still
lighted."
005A 7035_E 2 00 0000000000000000000000 "CASHOUT RM2: S35 abnormal. Power OFF, but sensor still
lighted."
005A 7044_E 2 00 0000000000000000000000 "CASHOUT RM2: S44 abnormal. Power OFF, but sensor still
lighted."
005A 7045_E 2 00 0000000000000000000000 "CASHOUT RM2: S45 abnormal. Power OFF, but sensor still
lighted."
005A 7050_E 2 00 0000000000000000000000 "CASHOUT RM2: S50 abnormal. Power OFF, but sensor still
lighted."
005A 7051_E 2 00 0000000000000000000000 "CASHOUT RM2: S51 abnormal. Power OFF, but sensor still
lighted."
005A 7052_E 2 00 0000000000000000000000 "CASHOUT RM2: S52 abnormal. Power OFF, but sensor still
lighted."
005A 7053_E 2 00 0000000000000000000000 "CASHOUT RM2: S53 abnormal. Power OFF, but sensor still
lighted."
005A 7054_E 2 00 0000000000000000000000 "CASHOUT RM2: S54 abnormal. Power OFF, but sensor still
lighted."
005A 7055_E 2 00 0000000000000000000000 "CASHOUT RM2: S55 abnormal. Power OFF, but sensor still
lighted."
005A 7056_E 2 00 0000000000000000000000 "CASHOUT RM2: S56 abnormal. Power OFF, but sensor still
lighted."
005A 7060_E 2 00 0000000000000000000000 "CASHOUT RM2: S60 abnormal. Power OFF, but sensor still
lighted."
005A 7065_E 2 00 0000000000000000000000 "CASHOUT RM2: S65 abnormal. Power OFF, but sensor still
lighted."
005A 7066_E 2 00 0000000000000000000000 "CASHOUT RM2: S66 abnormal. Power OFF, but sensor still
lighted."
005A 7067_E 2 00 0000000000000000000000 "CASHOUT RM2: S67 abnormal. Power OFF, but sensor still
lighted."
005A 7068_E 2 00 0000000000000000000000 "CASHOUT RM2: S68 abnormal. Power OFF, but sensor still
lighted."
005A 7070_E 2 00 0000000000000000000000 "CASHOUT RM2: S70 abnormal. Power OFF, but sensor still
lighted."
005A 7071_E 2 00 0000000000000000000000 "CASHOUT RM2: S71 abnormal. Power OFF, but sensor still
lighted."
005A 7072_E 2 00 0000000000000000000000 "CASHOUT RM2: S72 abnormal. Power OFF, but sensor still
lighted."
005A 7073_E 2 00 0000000000000000000000 "CASHOUT RM2: S73 abnormal. Power OFF, but sensor still."
005A 7074_E 2 00 0000000000000000000000 "CASHOUT RM2: S74 abnormal. Power OFF, but sensor still
lighted."
005A 7075_E 2 00 0000000000000000000000 "CASHOUT RM2: S75 abnormal. Power OFF, but sensor still
lighted."
005A 7076_E 2 00 0000000000000000000000 "CASHOUT RM2: S76 abnormal. Power OFF, but sensor still
lighted."
005A 7077_E 2 00 0000000000000000000000 "CASHOUT RM2: S77 abnormal. Power OFF, but sensor still
lighted."
005A 7078_E 2 00 0000000000000000000000 "CASHOUT RM2: S78 abnormal. Power OFF, but sensor still
lighted."
005A 7079_E 2 00 0000000000000000000000 "CASHOUT RM2: S79 abnormal. Power OFF, but sensor still
lighted."
005A 7080_E 2 00 0000000000000000000000 "CASHOUT RM2: S80 abnormal. Power OFF, but sensor still
lighted."
005A 7081_E 2 00 0000000000000000000000 "CASHOUT RM2: S81 abnormal. Power OFF, but sensor still
lighted."
005A 7082_E 2 00 0000000000000000000000 "CASHOUT RM2: S82 abnormal. Power OFF, but sensor still
lighted."
005A 8010_E 2 00 0000000000000000000000 "CASHOUT RM2: No-dispensing, foreign material, skew-
dispensing, dispensing of some part of note or locking is detected
5 times by a command and finally no-dispensing,"
005A 8012_E 2 00 0000000000000000000000 "CASHOUT RM2: More than 2 check sheets dispensed at trans-
portation way. Check or chained-dispensing, together-dispensing
or half-folded dispensing detected."

U25604-J-Z745-1-7600 May 2011 111

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A 8013_E 2 00 0000000000000000000000 "CASHOUT RM2: No-dispensing, foreign material, skew-

dispensing, dispensing of some part of note or locking is detected
5 times by a command and finally foreign material"
005A 8014_E 2 00 0000000000000000000000 "CASHOUT RM2: No-dispensing, foreign material, skew-
dispensing, dispensing of some part of note or locking is detected
5 times by a command and finally dispensing is"
005A 8015_E 2 00 0000000000000000000000 "CASHOUT RM2: No-dispensing, foreign material, skew-
dispensing, dispensing of some part of note or locking is detected
5 times by a command and finally locking detected"
005A 8025_E 2 00 0000000000000000000000 "CASHOUT RM2: Many BID other error."
005A 8026_E 2 00 0000000000000000000000 "CASHOUT RM2: Many BID identification impossible error. BEB
$040 - 42 "
005A 8030_E 2 00 0000000000000000000000 "CASHOUT RM2: Transport locked, note locking is detected 5
times by a command."
005A 8031_E 2 00 0000000000000000000000 "CASHOUT RM2: Transport locked, note locking is detected 5
times by a command."
005A 8090_E 2 00 0000000000000000000000 "CASHOUT RM2: Running out of notes or picking no notes."
005A 80A0_E 2 00 0000000000000000000000 "CASHOUT RM2: Picking error retries exceeded in the cassette."
005A 80A5_E 2 00 0000000000000000000000 "CASHOUT RM2: Picking error reties exceeded in cassette A,
picking was locked."
005A 80A6_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette A."
005A 80A7_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette A."
005A 80A8_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette A."
005A 80A9_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette A."
005A 80AA_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette A."
005A 80AB_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette A."
005A 80AC_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette A."
005A 80AD_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette A."
005A 80B0_E 2 00 0000000000000000000000 "CASHOUT RM2: Picking error retries, Exceeded in the cassette
B."
005A 80B5_E 2 00 0000000000000000000000 "CASHOUT RM2: Picking error reties, Exceeded in the cassette B,
picking was locked."
005A 80B6_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette B."
005A 80B7_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette B."
005A 80B8_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette B."
005A 80B9_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette A."
005A 80BA_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette A."
005A 80BB_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette B."
005A 80BC_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette B."
005A 80BD_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette B."
005A 80C0_E 2 00 0000000000000000000000 "CASHOUT RM2: Picking error retries exceeded in the cassette
C."
005A 80C5_E 2 00 0000000000000000000000 "CASHOUT RM2: Picking error reties exceed in the cassette C,
picking locked."
005A 80C6_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette C."
005A 80C7_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette C."
005A 80C8_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette C."
005A 80C9_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette C."
005A 80CA_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette C."

112 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A 80CB_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette C."
005A 80CC_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette C."
005A 80CD_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette C."
005A 80D0_E 2 00 0000000000000000000000 "CASHOUT RM2: Picking error retries. Exceeded in the cassette
D."
005A 80D5_E 2 00 0000000000000000000000 "CASHOUT RM2: Picking error retries, exceeded in the cassette
D, picking was locked."
005A 80D6_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette D."
005A 80D7_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette D."
005A 80D8_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette D."
005A 80D9_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette D."
005A 80DA_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette D."
005A 80DB_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette D."
005A 80DC_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette D"
005A 80DD_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection occurred frequently with notes that
were picked out from the cassette D."
005A 9002_E 2 00 0000000000000000000000 "CASHOUT RM2: Software error for pressure plate control at
temporary stack unit. Trouble detected at pressure plate control,
but corresponding MTC undefined."
005A 9003_E 2 00 0000000000000000000000 "CASHOUT RM2: Software error for outlet control. Action
indication of outlet undefined."
005A 9004_E 2 00 0000000000000000000000 "CASHOUT RM2: Software error for pressure plate control at
temporary stack unit. Action indication of temporary stack unit
undefined."
005A 9005_E 2 00 0000000000000000000000 "CASHOUT RM2: Software error for gate lever control at outlet.
Trouble detected at gate lever control, but corresponding MTC
undefined."
005A 9006_E 2 00 0000000000000000000000 "CASHOUT RM2: Software error for pressure plate control at
returning stack unit. Action indication of returning stack unit
undefined."
005A 9007_E 2 00 0000000000000000000000 "CASHOUT RM2: Software error for pressure plate control at
returning stack unit. Trouble detected at pressure plate control, but
corresponding MTC undefined."
005A 9008_E 2 00 0000000000000000000000 "CASHOUT RM2: Software error for pressure plate control at
collection cassette. Action indication of collection unit undefined."
005A 9009_E 2 00 0000000000000000000000 "CASHOUT RM2: Software error for pressure plate control at
collection cassette. Trouble detected at cassette control, but corre-
sponding MTC undefined."
005A 900D_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Data of transpor-
tation status is unexpected at transportation for collection: outlet."
005A 900E_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Data of transpor-
tation status is unexpected at transportation for storing."
005A 900F_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Data of transpor-
tation status is unexpected at transportation for reset."
005A 9010_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Time-over for
completion of internal processing subsidiary task processing unit."
005A 9011_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Time-over for
completion of internal processing internal communication control
unit."
005A 9012_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Time-over for
completion of internal processing EBH controller."
005A 9013_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Time-over for
completion of internal processing transportation control unit."
005A 9014_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH sSoftware control error. Time-over for
completion of internal processing cassette controller."
005A 9015_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Time-over for
completion of internal processing outlet control unit."
005A 9018_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Time-over for
completion of internal processing temporary stack control unit."
005A 9019_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Time-over for
completion of internal processing main motor control unit."

U25604-J-Z745-1-7600 May 2011 113

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A 901A_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Time-over for
completion of internal processing cassette controller A."
005A 901B_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Time-over for
completion of internal processing cassette controller B."
005A 901C_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Time-over for
completion of internal processing cassette controller C."
005A 901D_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Time-over for
completion of internal processing cassette controller D."
005A 9022_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination unmatched. Denomination for
cassette A by data write and information of cassette not matched."
005A 9024_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Time-over for
completion of internal processing: retract cassette control unit."
005A 9026_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Data of transpor-
tation status is unexpected at transportation for returning."
005A 9027_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Trouble detected at
suspension processing of internal communication task before
transportation."
005A 9028_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Trouble detected at
start-up processing of internal communication task after transpor-
tation."
005A 902B_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Data of transpor-
tation status is unexpected at transportation for deposit."
005A 902D_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Data of transpor-
tation status is unexpected at transportation for dispense."
005A 902F_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error of EBH WDT-out for tray
controller."
005A 9030_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Trouble detected
internal communication."
005A 9031_E 2 00 0000000000000000000000 "CASHOUT RM2: The type of safe pass that is read at Power ON
does not correspond with the"
005A 9037_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Trouble detected
internal communication. Application error: erong denomination
should be cashed in cassette A. Sample:"
005A 9038_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination unmatched. Denomination for
cassette B by data write and information of cassette not matched."
005A 9039_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination unmatched. Denomination for
cassette C by data write and information of cassette not matched."
005A 903A_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination unmatched. Denomination for
cassette D by data write and information of cassette not matched."
005A 903B_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error of EBH test of WDT-out
abnormal. Time-out communication mainbord -> tray controller."
005A 903C_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error of EBH. Whole RAM clearing
abnormal."
005A 903D_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Received message
abnormal at tray controller."
005A 9050_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error or hardware error.
Sensor power control error."
005A 9051_E 2 00 0000000000000000000000 "CASHOUT RM2: Lane is setting up for stacking, but dispense
cassette is installed."
005A 9052_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination ID abnormal for cassette B. Lane
is setting up for stacking."
005A 9053_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination ID abnormal for cassette C. Lane
is setting up for stacking, but dispense cassette is installed."
005A 9054_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination ID abnormal for cassette D. Lane
is setting up for stacking, but dispense cassette is installed."
005A 9057_E 2 00 0000000000000000000000 "CASHOUT RM2: Time-over for completion of command."
005A 905A_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination ID not set or it maybe not read."
005A 905B_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination ID not set or it maybe not read."
005A 905C_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination ID not set or it maybe not read."
005A 905D_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination ID not set or it maybe not read."
005A 9060_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Command data of
transportation handler abnormal: set of flapping test abnormal."
005A 9061_E 2 00 0000000000000000000000 "CASHOUT RM2: The feeding lane is empty, detected by Handler."
005A 9062_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination ID abnormal for reject cassette.
Denomination ID setting data is abnormal."
005A 9064_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Time-out of waiting
for echo check completion: echo check is requested to internal
communication unit, but no completion"
005A 9065_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Time-out of waiting
for echo check completion: error of echo check."

114 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A 9066_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination ID setting data is abnormal. Data
from BEB do match to cassette (wrong ID`s)."
005A 9067_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination ID setting data is abnormal, data
from BEB do match to cassette (wrong ID`s)."
005A 9068_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination ID setting data is abnormal, data
from BEB do match to cassette (wrong ID`s)."
005A 9069_E 2 00 0000000000000000000000 "CASHOUT RM2: Denomination ID setting data is abnormal. Data
from BEB do match to cassette (wrong ID`s)."
005A 906A_E 2 00 0000000000000000000000 "CASHOUT RM2: FRU device data abnormal for cassette A. SUM
check abnormal for denomination. *Detected by EBH controller "
005A 906B_E 2 00 0000000000000000000000 "CASHOUT RM2: FRU device data abnormal for cassette B. SUM
check abnormal for denomination. *Detected by EBH controller "
005A 906C_E 2 00 0000000000000000000000 "CASHOUT RM2: FRU device data abnormal for cassette C. SUM
check abnormal for denomination. *Detected by EBH controller "
005A 906D_E 2 00 0000000000000000000000 "CASHOUT RM2: FRU device data abnormal for cassette D. SUM
check abnormal for denomination. *Detected by EBH controller"
005A 906E_E 2 00 0000000000000000000000 "CASHOUT RM2: FRU device data abnormal for reject cassette.
SUM check abnormal for denomination."
005A 906F_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Time-out of waiting
for FRU device completion. No communication to cassette
EEPROM."
005A 9070_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Indication code of
main motor control abnormal: action indicated during rotation -
detected by motor handler."
005A 9071_E 2 00 0000000000000000000000 "CASHOUT RM2: Control indicated, but not completed after 15
seconds - detected motor handler."
005A 9072_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes disappeared in outlet when they must be
stayed. Empty in Ootlet, when dispensing handler is launched -
detected transportation handler."
005A 9073_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes disappeared in temporary stack unit when
they must be stayed. Empty in temporary stack unit, when
dispensing handler is launched - detected"
005A 9074_E 2 00 0000000000000000000000 "CASHOUT RM2: Time-over for cction of transportation handler.
Action not completed after predefined time by handler."
005A 9075_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Command data of
transportation hander abnormal - ACT2 abnormal."
005A 9076_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Command data of
transportation hander abnormal - set of limitation number of notes
for temporary stack unit abnormal."
005A 9077_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Command data of
transportation hander abnormal - set of dispensing number of
notes abnormal."
005A 9078_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Relay monitoring
area insufficient: area not allocated to writing arrival time for relay
sensor."
005A 9079_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. BMT insufficient:
area not allocated during transportation - detected by transpor-
tation handler."
005A 907A_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. BRT insufficient:
area not allocated during transportation - detected by transpor-
tation handler."
005A 907B_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Memory data
destroyed: data which transportation handler uses is unexpected -
memory maybe broken."
005A 907C_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Unhypothetical note
detected at flapping: two or more than notes are waiting for
flapping at same time."
005A 907D_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Command data of
transportation hander abnormal: set of acceptable media
abnormal."
005A 907E_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Command data of
transportation hander abnormal: set of destination for denomina-
tions abnormal."
005A 9080_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Transportation
handlers duplicated launched: another transportation handler
launched again during execution"
005A 9081_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Time-out for action
of transportation handler - execution of transportation handler not
completed after predefined time."
005A 9082_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Recognition data of
transportation handler abnormal: denomination data not satisfied,
but notes accepted."

U25604-J-Z745-1-7600 May 2011 115

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A 9083_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Recognition data of
transportation handler abnormal: recognition is NG, but notes
accepted."
005A 9084_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Data of transpor-
tation handler abnormal: transportation handler receives
dispensing from not-installed cassette."
005A 9088_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Memory broken:
recognition response data BRT of transportation invalid."
005A 908C_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Data of transpor-
tation handler abnormal: motor stop indicated during transportation
- detected by transportation handler."
005A 90C1_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Memory data
destroyed: data which transportation handler uses is unexpected -
memory maybe broken."
005A 90C2_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. BMT insufficient:
area not allocated during transportation - detected by transpor-
tation handler."
005A 90C3_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. BRT insufficient:
area not allocated during transportation - detected by rranspor-
tation handler."
005A 90C4_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Relay monitoring
area insufficient: area not allocated to writing arrival time for relay
sensor."
005A 90C5_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Unhypothetical note
detected at flapping: two or more than notes are waiting for
flapping at same time."
005A 90C6_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Memory data
destroyed: BRT which transportation handler uses is unexpected -
memory maybe broken."
005A 90C7_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error. Memory data
destroyed at transportation handler. *Detected by tray controller "
005A 90C8_E 2 00 0000000000000000000000 "CASHOUT RM2: Control indicated, but not completed after 3
seconds in transportation handler."
005A 90C9_E 2 00 0000000000000000000000 "CASHOUT RM2: It tried IOP signal of tray to turn OFF, but it did
not turn OFF. (Although the IOP signal is OFF, the motor run.)"
005A 90CA_E 2 00 0000000000000000000000 "CASHOUT RM2: The TG interruption processing stopped while
conveying. TG line is abnormal."
005A 90CB_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray software control error. Command error
(message which tray controller receive from EBH controller is
abnormal)."
005A 90CF_E 2 00 0000000000000000000000 "CASHOUT RM2: TG Line abnormal. Executing of command,
interrupt signal of TG. Electrical noise on the wire."
005A 90D0_E 2 00 0000000000000000000000 "CASHOUT RM2: Error of sequence. EBH controller send signal of
S51-ON in serial order. *Detected by tray controller "
005A 90D1_E 2 00 0000000000000000000000 "CASHOUT RM2: Error of sequence. EBH controller send signal of
S51-OFF in serial order. *Detected by tray controller "
005A 90D2_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray software control error. Time-over for
completion of internal processing in pressure plate control at
cassette A."
005A 90D3_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray software control error. Time-over for
completion of internal processing in pressure plate control at
cassette B."
005A 90D4_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray software control error. Time-over for
completion of internal processing in pressure plate control at
cassette C."
005A 90D5_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray software control error. Time-over for
completion of internal processing in pressure plate control at
cassette D."
005A 90D6_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray software internal command timing
abnormal. Executing of pressure plate control at cassette A, send
command again."
005A 90D7_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray software internal command timing
abnormal. Executing of pressure plate control at cassette B, send
command again."
005A 90D8_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray software internal command timing
abnormal. Executing of pressure plate control at cassette C, send
command again."
005A 90D9_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray software internal command timing
abnormal. Executing of pressure plate control at cassette D, send
command again."
005A 90DA_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray software control error time-over for
completion of internal processing in pressure plate control at reject
cassette."

116 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A 90DB_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray software internal command timing
abnormal. Executing of pressure plate control at reject cassette,
send command again."
005A 90DD_E 2 00 0000000000000000000000 "CASHOUT RM2: It tried to read data from EEPROM device of
Reject cassette, but there was no"
005A 90DE_E 2 00 0000000000000000000000 "CASHOUT RM2: It tried to write data to EEPROM Device of
Reject cassette but there were no"
005A 90DF_E 2 00 0000000000000000000000 "CASHOUT RM2: It tried to write data to EEPROM Device of
Reject cassette, but verify-error"
005A 90E0_E 2 00 0000000000000000000000 "CASHOUT RM2: IOP cut for EBH controller. *Detected by tray
controller "
005A 90E2_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray software control error. Rejection unit
controller appointed undefined sensor."
005A 90E3_E 2 00 0000000000000000000000 "CASHOUT RM2: The interrupt processing test was executed in
synthetic mechanical test, but it failed. There was no interruption
processing of S70-S79, S80."
005A 90E4_E 2 00 0000000000000000000000 "CASHOUT RM2: It tried to read data from FRU device of cassette
A, but there were no response. FRU device line is abnormal."
005A 90E5_E 2 00 0000000000000000000000 "CASHOUT RM2: It tried to read data from FRU device of cassette
A, but there were no response. FRU device line is abnormal."
005A 90E6_E 2 00 0000000000000000000000 "CASHOUT RM2: It tried to write data to FRU device of cassette A,
but verify-error was occurred. FRU device line is abnormal."
005A 90E7_E 2 00 0000000000000000000000 "CASHOUT RM2: It tried to read data from FRU device of cassette
B, but there were no response. FRU device line is abnormal."
005A 90E8_E 2 00 0000000000000000000000 "CASHOUT RM2: It tried to read data from FRU device of cassette
B, but there were no response. FRU device line is abnormal."
005A 90E9_E 2 00 0000000000000000000000 "CASHOUT RM2: It tried to write data to FRU device of cassette B,
but verify-error was occurred FRU device line is abnormal."
005A 90EA_E 2 00 0000000000000000000000 "CASHOUT RM2: It tried to read data from FRU device of cassette
C, but there were no response FRU device line is abnormal."
005A 90EB_E 2 00 0000000000000000000000 "CASHOUT RM2: It tried to read data from FRU device of cassette
C, but there were no response FRU device line is abnormal."
005A 90EC_E 2 00 0000000000000000000000 "CASHOUT RM2: It tried to write data to FRU device of cassette C,
but verify-error was occurred FRU device line is abnormal."
005A 90ED_E 2 00 0000000000000000000000 "CASHOUT RM2: It tried to read data from FRU device of cassette
D, but there were no response FRU device line is abnormal."
005A 90EE_E 2 00 0000000000000000000000 "CASHOUT RM2: It tried to read data from FRU device of cassette
D, but there were no response FRU device line is abnormal."
005A 90EF_E 2 00 0000000000000000000000 "CASHOUT RM2: It tried to write data to FRU device of cassette D,
but verify-error was occurred FRU device line is abnormal."
005A A009_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet. Notes must be
remained in outlet by status from transportation control (after
returning of notes from outlet)"
005A A00A_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet after initial reset
is preprocessed, S10,S12,S14,S15 are not lighting."
005A A00D_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in I/O module or notes
are detected when they are not remained after transportation for
returning reject notes to I/O module."
005A A00E_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in ESCROW unit or
notes are detected when they are not remained."
005A A00F_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in ESCROW unit or
notes are detected when they are not remained."
005A A010_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet.
S10,S12,S14,S15 are not shielded when bucket is set at position
of Dispensing - before deposit transportation."
005A A011_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are detected when they are not remained
in outlet. Either S1B,S1D,S1F,S2A is shielded when outlet is
moved - before deposit transportation."
005A A012_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet or notes are
detected by mistake when they are not remained. Result of
remaining check is changed when bucket is moved"
005A A013_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet or notes are
detected when they are not remained"
005A A014_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet after transpor-
tation for deposit S10, S12, S14, S15"
005A A016_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are detected in outlet after processing
identification by the create reference signature. Either S10, S12,
S14, S15 is shielded."
005A A01C_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet or notes are
detected when they are not remained after transportation for
dispense, or the bucket position is abnormal"

U25604-J-Z745-1-7600 May 2011 117

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A A01D_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet or notes are
detected when they are not remained before transportation for
dispense. S10, S12, S14, S15"
005A A01E_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in rejected note
ESCROW Unit or notes are detected when they are not remained
in pressure plate moved for returning reject notes"
005A A01F_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet when pressure
plate moved at outlet after transportation for dispense. S10, S12,
S14, S15"
005A A020_E 2 00 0000000000000000000000 "CASHOUT RM2: The picking status error in the cassette A. After
notes were feed with the status "empty"."
005A A021_E 2 00 0000000000000000000000 "CASHOUT RM2: The picking status error in the cassette B. After
notes were feed with the status "empty"."
005A A022_E 2 00 0000000000000000000000 "CASHOUT RM2: The picking status error in the cassette C. After
notes were feed with the status "empty."."
005A A023_E 2 00 0000000000000000000000 "CASHOUT RM2: The picking status error in the cassette D. After
notes were fed with the status "empty"."
005A A024_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet. Accumulation
of notes is reported by transportation control after returning trans-
portation
005A A026_E 2 00 0000000000000000000000 "CASHOUT RM2: Invalid number of dispensed notes."
005A A027_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet. Result of
remaining check is changed when bucket is set at position of
accumulation - before dispensing transportation"
005A A028_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are detected when they are not remained
in outlet. One of S1B, 1D, 1F, S2A is shielded when outlet is set at
position of transportation position"
005A A029_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in temporary stack unit."
005A A02A_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet or notes are
detected when they are not remained. Result of remaining check
is changed before returning retry"
005A A02B_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in temporary stack unit
or notes are detected when they are not remained."
005A A02C_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in temporary stack unit
or notes are detected when they are not remained."
005A A02D_E 2 00 0000000000000000000000 "CASHOUT RM2: Number of notes in temporary stack unit and
number of returned notes are not same."
005A A02E_E 4 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet or notes are
detected when they are not remained. Result of remaining check
is changed when bBucket is moved"
005A A030_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in temporary stack unit."
005A A031_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet or notes are
detected when they are not remained. Result of remaining check
is changed when bucket is moved"
005A A033_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in temporary stack unit
or notes are detected when they are not remained."
005A A034_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in temporary stack unit."
005A A037_E 2 00 0000000000000000000000 "CASHOUT RM2: Number of stacked notes in temporary stack unit
and number of recognized notes are not same after storing trans-
portation."
005A A038_E 2 00 0000000000000000000000 "CASHOUT RM2: Number of recognized notes and number of
stored notes are not same at storing."
005A A03D_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are not remained in outlet, but they are
detected at synthetic transportation test."
005A A03E_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are not remained in temporary stack unit,
but they are detected."
005A A03F_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are not remained in returning stack unit,
but detected at synthetic transportation test."
005A A047_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet or notes are
detected when they are not remained."
005A A04A_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet or notes are
detected when they are not remained."
005A A04B_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet or notes are
detected when they are not remained."
005A A04C_E 2 00 0000000000000000000000 "CASHOUT RM2: There are abnormalities in a passage check."
005A A04D_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet or notes are
detected when they are not remained."
005A A04E_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet or are notes
detected when they are not remained."
005A A04F_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in temporary stack unit
or notes are detected when they are not remained."

118 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A A050_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet or notes are
detected when they are not remained."
005A A054_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet or notes are
detected when they are not remained."
005A A055_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet or notes are
detected when they are not remained."
005A A056_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet or notes are
detected when they are not remained."
005A A05A_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in temporary stack unit
or notes are detected when they are not remained."
005A A060_E 2 00 0000000000000000000000 "CASHOUT RM2: Rear D lane S60. Abnormal interruption S60
cannot be turned ON. S60 (cash-out transport from safe) is
blocked but should be free."
005A A061_E 2 00 0000000000000000000000 "CASHOUT RM2: Rear D lane S54. Abnormal interruption S54
cannot be turned ON. S54 (cash-in transport to safe) is blocked but
should be free."
005A A062_E 2 00 0000000000000000000000 "CASHOUT RM2: Abnormal interruption of S55. S55 cannot be
turned ON."
005A A06B_E 2 00 0000000000000000000000 "CASHOUT RM2: Count of BID and count of accumulation place
at S54 are not same. Check is executed for each denomination."
005A A06C_E 2 00 0000000000000000000000 "CASHOUT RM2: There is/are rejects, but value counted at
accumulation sensor S54 is 0. Note do not reach cash-in transport
(S54)."
005A A06D_E 2 00 0000000000000000000000 "CASHOUT RM2: There is/are rejects, but number of interrupts at
accumulation sensor S54 is 0. Note do not reach cash-in transport
(S54)."
005A A06E_E 2 00 0000000000000000000000 "CASHOUT RM2: There are no rejects, but there is interrupt at
accumulation sensor S54. Note do not reach cash-in transport
(S54)."
005A A071_E 2 00 0000000000000000000000 "CASHOUT RM2: Number of recognized notes by BID and number
of calculated notes are not same."
005A A072_E 2 00 0000000000000000000000 "CASHOUT RM2: Number of stacked notes in temporary stack unit
and count of S30 interrupts are not same."
005A A074_E 2 00 0000000000000000000000 "CASHOUT RM2: Count of S22/S24/S25/S26 and count of S50
are not same."
005A A075_E 2 00 0000000000000000000000 "CASHOUT RM2: Number of stacked notes in temporary stack unit
and count of FL2 are not same."
005A A07A_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection of notes is set in recognition response
after transportation, but count of S46/47 is 0."
005A A07B_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection of notes is set in recognition response
after transportation, but interrupt count of S46/47 is 0."
005A A07C_E 2 00 0000000000000000000000 "CASHOUT RM2: Rejection of notes is not set in recognition
response after transportation, but interrupt of S46/47 is detected."
005A A07D_E 2 00 0000000000000000000000 "CASHOUT RM2: Calculation abnormal. Rejection of notes is not
set in recognition response after transportation."
005A A07E_E 2 00 0000000000000000000000 "CASHOUT RM2: Calculation abnormal. Rejection of notes is set
in recognition response after transportation."
005A A081_E 2 00 0000000000000000000000 "CASHOUT RM2: Another note which was recognized is detected
at Storing. Reader swapped ID after second feed."
005A A082_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in outlet. The note was
not able to be detected in the transporting path."
005A A083_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are disappeared in temporary stack unit.
Notes are transported into temporary stack unit."
005A A084_E 2 00 0000000000000000000000 "CASHOUT RM2: Number of note which indicated by EBH
controller and count of tray controller are not same."
005A A085_E 2 00 0000000000000000000000 "CASHOUT RM2: Number of reject note which indicated by EBH
controller and count of tray controller are not same."
005A A092_E 2 00 0000000000000000000000 "CASHOUT RM2: Calculation abnormal: number of dispense
notes."
005A A093_E 2 00 0000000000000000000000 "CASHOUT RM2: Calculation abnormal: number of dispense
notes."
005A A094_E 2 00 0000000000000000000000 "CASHOUT RM2: Number of accumulated notes in cassette A
abnormal."
005A A095_E 2 00 0000000000000000000000 "CASHOUT RM2: Number of accumulated notes in cassette B
abnormal."
005A A096_E 2 00 0000000000000000000000 "CASHOUT RM2: Number of accumulated notes in cassette C
abnormal."
005A A097_E 2 00 0000000000000000000000 "CASHOUT RM2: Number of accumulated notes in cassette D
abnormal."
005A A09A_E 2 00 0000000000000000000000 "CASHOUT RM2: Different denomination picked from Cassette A.
Wrong denomimation loaded to cassette A."

U25604-J-Z745-1-7600 May 2011 119

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A A09B_E 2 00 0000000000000000000000 "CASHOUT RM2: Different denomination picked from Cassette B.
Wrong denomimation loaded to cassette B."
005A A09C_E 2 00 0000000000000000000000 "CASHOUT RM2: Different denomination picked from Cassette C.
Wrong denomimation loaded to cassette C."
005A A09D_E 2 00 0000000000000000000000 "CASHOUT RM2: Different denomination picked from cassette D.
Wrong denomimation loaded to cassette D."
005A A0A1_E 2 00 0000000000000000000000 "CASHOUT RM2: Value count at S65, S66, S67 > value count at
S2B "
005A A0A2_E 2 00 0000000000000000000000 "CASHOUT RM2: Value count at S65, S66, S67 > value count at
S2B "
005A A0B7_E 2 00 0000000000000000000000 "CASHOUT RM2: Note is transported into entrance of tray, when it
is not destined to returning entrance of tray."
005A A0B8_E 2 00 0000000000000000000000 "CASHOUT RM2: Note is transported into outlet of tray, when it is
not destined to returning outlet of tray."
005A A0B9_E 2 00 0000000000000000000000 "CASHOUT RM2: Note is transported into outlet unit, when it is not
destined to outlet unit."
005A A0BA_E 2 00 0000000000000000000000 "CASHOUT RM2: Note is transported into temporary stack unit,
when it is not destined to temporary stack unit."
005A A0BB_E 2 00 0000000000000000000000 "CASHOUT RM2: Note is transported into L2 box, when it is not
destined to L2 box."
005A A0C1_E 2 00 0000000000000000000000 "CASHOUT RM2: Note is transported into cassette A, when it is
not destined to there. *Detected by tray controller"
005A A0C2_E 2 00 0000000000000000000000 "CASHOUT RM2: Note is transported into cassette B, when it is
not destined to there. *Detected by tray controller"
005A A0C3_E 2 00 0000000000000000000000 "CASHOUT RM2: Note is transported into cassette C, when it is
not destined to there. *Detected by tray controller"
005A A0C4_E 2 00 0000000000000000000000 "CASHOUT RM2: Note is transported into cassette D, when it is
not destined to there. *Detected by tray controller"
005A A0C7_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes are transported to unexpected direction.
Note is transported into retract cassette, when it is not destined to
there."
005A A0C8_E 2 00 0000000000000000000000 "CASHOUT RM2: Note is transported into reject, when it is not
destined to there. *Detected by tray controller"
005A A0CA_E 2 00 0000000000000000000000 "CASHOUT RM2: No reject note, but reject sensor detect notes.
*Detected by tray controller "
005A A0D1_E 2 00 0000000000000000000000 "CASHOUT RM2: Subtract number of accumulation cassette B, C,
D from count of S71 and count of S72 are not same. *Detected by
tray controller"
005A A0D2_E 2 00 0000000000000000000000 "CASHOUT RM2: Subtract number of accumulation cassette C, D
from count of S73 and count of S74 are not same. *Detected by
tray controller"
005A A0D3_E 2 00 0000000000000000000000 "CASHOUT RM2: Subtract number of accumulation Cassette D
from count of S75 and count of S77 are not same. *Detected by
tray controller"
005A A0D4_E 2 00 0000000000000000000000 "CASHOUT RM2: Count of S77 and count of S78 are not same.
*Detected by tray controller "
005A A0D5_E 2 00 0000000000000000000000 "CASHOUT RM2: Number of accumulation for cassette A, B, C
and D and count of S51 are not same."
005A A0D6_E 2 00 0000000000000000000000 "CASHOUT RM2: Count of S70 and count of S51 are not same."
005A B001_E 2 00 0000000000000000000000 "CASHOUT RM2: After request for transmission to BID, tesponse
data is not embedded in ting buffer."
005A B002_E 2 00 0000000000000000000000 "CASHOUT RM2: Request for transmission of the reception block,
sequence abnormal, retries exceeded."
005A B003_E 2 00 0000000000000000000000 "CASHOUT RM2: Request for transmission of the reception block,
CRC check error, retries exceeded."
005A B004_E 2 00 0000000000000000000000 "CASHOUT RM2: Request for transmission of the reception block,
time-out of waiting for response, retries exceeded."
005A B005_E 2 00 0000000000000000000000 "CASHOUT RM2: Request for transmission of the reception block,
over-run/parity abnormal, retries exceeded."
005A B006_E 2 00 0000000000000000000000 "CASHOUT RM2: The event that was not sure to exist in the matrix
was generated."
005A B007_E 2 00 0000000000000000000000 "CASHOUT RM2: It doesn't return even if the response from BID
passes 26 seconds."
005A B008_E 2 00 0000000000000000000000 "CASHOUT RM2: The command transmission completion is not
done. Or, reception completion receipt transmission completion is
not done."
005A B009_E 2 00 0000000000000000000000 "CASHOUT RM2: A soft error: There is no reception receipt though
the receipt reception event was generated. (illegal event)"
005A B00A_E 2 00 0000000000000000000000 "CASHOUT RM2: A soft error: There is no reception response
though the response reception event was generated. (illegal
event)"

120 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A B00B_E 2 00 0000000000000000000000 "CASHOUT RM2: Transmission error generation when response
is received."
005A B00C_E 2 00 0000000000000000000000 "CASHOUT RM2: BID status error. The state doesn't become
normal though it confirmed to BID with status request."
005A B020_E 2 00 0000000000000000000000 "CASHOUT RM2: Transportation is cancelled, because response
for recognition is not transmitted from BID."
005A C000_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C001_E 2 00 0000000000000000000000 "CASHOUT RM2: Command time-out. Communication error (BEB
error $001) "
005A C002_E 2 00 0000000000000000000000 "CASHOUT RM2: Command execution interrupted. Communi-
cation error(BEB error $002) "
005A C003_E 2 00 0000000000000000000000 "CASHOUT RM2: Command not expected. Communication error
(BEB error $003) "
005A C004_E 2 00 0000000000000000000000 "CASHOUT RM2: Data length or content of the command invalid.
Communication error (BEB error $004)"
005A C005_E 2 00 0000000000000000000000 "CASHOUT RM2: Data length invalid. Communication error (BEB
error $005) "
005A C006_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $006) "
005A C007_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $007) "
005A C008_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $008) "
005A C009_E 2 00 0000000000000000000000 "CASHOUT RM2: Data length invalid. Communication error (BEB
error $005) "
005A C00A_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $00A) "
005A C00B_E 2 00 0000000000000000000000 "CASHOUT RM2: Argument not admissible. Communication error
(BEB error $00B) "
005A C00C_E 2 00 0000000000000000000000 "CASHOUT RM2: Defective data. Data error (BEB error $00C) "
005A C00D_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C00E_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from banknote validator."
005A C00F_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C010_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $010) "
005A C011_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $011) "
005A C012_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $012) "
005A C013_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $013) "
005A C014_E 2 00 0000000000000000000000 "CASHOUT RM2: Supporting memory space deleted. Note table
(BEB error $014) "
005A C015_E 2 00 0000000000000000000000 "CASHOUT RM2: Supporting memory space deleted. Note table
(BEB error $015) "
005A C016_E 2 00 0000000000000000000000 "CASHOUT RM2: Note from supporting memory recovered. Note
table (BEB error $016) "
005A C017_E 2 00 0000000000000000000000 "CASHOUT RM2: Note from supporting memory not recoverable
Note table (BEB error $017) "
005A C018_E 2 00 0000000000000000000000 "CASHOUT RM2: Extension module not available. Hardware error
(BEB error $018) "
005A C019_E 2 00 0000000000000000000000 "CASHOUT RM2: Corrupt entries in note table deleted. Note table
(BEB error $019) "
005A C01A_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from banknote validator."
005A C01B_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from banknote validator."
005A C01C_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from banknote validator."
005A C01D_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from banknote validator."
005A C01E_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from banknote validator."
005A C01F_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from banknote validator."
005A C020_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $020) "
005A C021_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $021) "
005A C022_E 2 00 0000000000000000000000 "CASHOUT RM2: Conflict of firmware version. Firmware error
(BEB error $022) "
005A C023_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $023) "
005A C024_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $024) "
005A C025_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $025) "
005A C026_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $026) "
005A C027_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $027) "
005A C028_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $028) "
005A C029_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $029) "
005A C02A_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $02A) "
005A C02B_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $02B) "
005A C02C_E 2 00 0000000000000000000000 "CASHOUT RM2: Transport clock missing or outside permitted
tolerance. Reader module maintenance (BEB error $02C)"
005A C02D_E 2 00 0000000000000000000000 "CASHOUT RM2: Note level detected (light level too high due to
soiled roller or because a document is under reader window)."

U25604-J-Z745-1-7600 May 2011 121

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A C02E_E 2 00 0000000000000000000000 "CASHOUT RM2: Illumination regulation failed. Hardware error
(BEB error $02E) "
005A C02F_E 2 00 0000000000000000000000 "CASHOUT RM2: Extrinsic light in reader module. Reader module
maintenance (BEB error $02F) "
005A C030_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $030) "
005A C031_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware test failed. Hardware error (BEB error
$031) "
005A C032_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $032) "
005A C033_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $033) "
005A C034_E 2 00 0000000000000000000000 "CASHOUT RM2: Communication time-out extension module 1.
Hardware error (BEB error $034) "
005A C035_E 2 00 0000000000000000000000 "CASHOUT RM2: Communication time-out extension module 2.
Hardware error (BEB error $035) "
005A C036_E 2 00 0000000000000000000000 "CASHOUT RM2: Communication time-out additional module.
Hardware error (BEB error $036) "
005A C037_E 2 00 0000000000000000000000 "CASHOUT RM2: UV-tube reader 1 malfunctioning > Reader
module maintenance. Reader module maintenance (BEB error
$037)"
005A C038_E 2 00 0000000000000000000000 "CASHOUT RM2: UV-tube reader 2 malfunctioning. Reader
module maintenance (BEB error $038) "
005A C039_E 2 00 0000000000000000000000 "CASHOUT RM2: Hardware error (BEB error $039) "
005A C03A_E 2 00 0000000000000000000000 "CASHOUT RM2: Corrupt EAROM parameter. Firmware error
(BEB error $03A) "
005A C03B_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C03C_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C03D_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from banknote validator."
005A C03E_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C03F_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C040_E 2 00 0000000000000000000000 "CASHOUT RM2: Note memory space empty. Data error (BEB
error $040) "
005A C041_E 2 00 0000000000000000000000 "CASHOUT RM2: Note memory space occupied. Data error (BEB
error $041) "
005A C042_E 2 00 0000000000000000000000 "CASHOUT RM2: Note data corrupt. Data error (BEB error $042) "
005A C043_E 2 00 0000000000000000000000 "CASHOUT RM2: Auxiliary memory space occupied Note table
(BEB error $043) "
005A C044_E 2 00 0000000000000000000000 "CASHOUT RM2: Data on auxiliary memory space corrupt. Note
table (BEB error $044) "
005A C045_E 2 00 0000000000000000000000 "CASHOUT RM2: Note memory address invalid. Data error (BEB
error $045) "
005A C046_E 2 00 0000000000000000000000 "CASHOUT RM2: Note data too large. Data error (BEB error $046)
"
005A C047_E 2 00 0000000000000000000000 "CASHOUT RM2: Note memory full. Note table (BEB error $047) "
005A C048_E 2 00 0000000000000000000000 "CASHOUT RM2: Signature format incorrect. Data error (BEB
error $048) "
005A C049_E 2 00 0000000000000000000000 "CASHOUT RM2: Signature version incorrect. Data error (BEB
error $049) "
005A C04A_E 2 00 0000000000000000000000 "CASHOUT RM2: Data error (BEB error $04A) "
005A C04B_E 2 00 0000000000000000000000 "CASHOUT RM2: Signature data corrupt. Data error (BEB error
$04B) "
005A C04C_E 2 00 0000000000000000000000 "CASHOUT RM2: Signature data CRC incorrect. Data error (BEB
error $04C) "
005A C04D_E 2 00 0000000000000000000000 "CASHOUT RM2: Currency data CRC incorrect. Data error (BEB
error $04D) "
005A C04E_E 2 00 0000000000000000000000 "CASHOUT RM2: Data error (BEB error $04E) "
005A C04F_E 2 00 0000000000000000000000 "CASHOUT RM2: ROM check CRC incorrect. Reader module
maintenance (BEB error $050) "
005A C050_E 2 00 0000000000000000000000 "CASHOUT RM2: Tape sensor not responding. Communication
error (BEB error $051) "
005A C051_E 2 00 0000000000000000000000 "CASHOUT RM2: Command execution on tape sensor failed.
Firmware error (BEB error $052) "
005A C052_E 2 00 0000000000000000000000 "CASHOUT RM2: Tape sensor calibration failed. Hardware error
(BEB error $053) "
005A C053_E 2 00 0000000000000000000000 "CASHOUT RM2: Tape sensor firmware download failed.
Hardware error (BEB error $054) "
005A C054_E 2 00 0000000000000000000000 "CASHOUT RM2: Corrupt firmware on tape sensor. Firmware error
(BEB error $055) "
005A C055_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C056_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C057_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C058_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."

122 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A C059_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C05A_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C05B_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C05C_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C05D_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C05E_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C05F_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C060_E 2 00 0000000000000000000000 "CASHOUT RM2: Format check message incorrect. Data error
(BEB error $060) $P"
005A C061_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C062_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C063_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C064_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C065_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C066_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C067_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C068_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C069_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C06A_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C06B_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C06C_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C06D_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C06E_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C06F_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C070_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C071_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C072_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C073_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C074_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C075_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C076_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C077_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C078_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C079_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C07A_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C07B_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C07C_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C07D_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C07E_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C07F_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C080_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C081_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C082_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C083_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C084_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C085_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C086_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C087_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C088_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C089_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C08A_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C08B_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C08C_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C08D_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C08E_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C08F_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C090_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C091_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C092_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C093_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C094_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C095_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C096_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C097_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."

U25604-J-Z745-1-7600 May 2011 123

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A C098_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C099_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C09A_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C09B_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C09C_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C09D_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C09E_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C09F_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0A0_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0A1_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0A2_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0A3_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0A4_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0A5_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0A6_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0A7_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0A8_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0A9_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0AA_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0AB_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0AC_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0AD_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0AE_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0AF_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0B0_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0B1_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0B2_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0B3_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0B4_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0B5_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0B6_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0B7_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0B8_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0B9_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0BA_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0BB_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0BC_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0BD_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0BE_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0BF_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0C0_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0C1_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0C2_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0C3_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0C4_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0C5_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0C6_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0C7_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0C8_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0C9_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0CA_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0CB_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0CC_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0CD_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0CE_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0CF_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0D0_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0D1_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0D2_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0D3_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0D4_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0D5_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0D6_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0D7_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."

124 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A C0D8_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0D9_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0DA_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0DB_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0DC_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0DD_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0DE_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0DF_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0E0_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0E1_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0E2_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0E3_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0E4_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0E5_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0E6_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0E7_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0E8_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0E9_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0EA_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0EB_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0EC_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0ED_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0EE_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0EF_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0F0_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0F1_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0F2_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0F3_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0F4_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0F5_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0F6_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0F7_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0F8_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0F9_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0FA_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0FB_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0FC_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0FD_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0FE_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A C0FF_E 2 00 0000000000000000000000 "CASHOUT RM2: Unknown error from note reader BEB."
005A D001_E 2 00 0000000000000000000000 "CASHOUT RM2: Half-size note detected by dispensing from
outlet."
005A E080_E 2 00 0000000000000000000000 "CASHOUT RM2: Erase error for flash memory. Erase command
is transmitted to flash memory, but error is replied."
005A E081_E 2 00 0000000000000000000000 "CASHOUT RM2: Write error for flash memory. Write command is
transmitted to flash memory, but error is replied."
005A E082_E 2 00 0000000000000000000000 "CASHOUT RM2: Write data for flash memory abnormal. Write
data and read data are not same after data write."
005A E0F0_E 2 00 0000000000000000000000 "CASHOUT RM2: Data of PDL command abnormal. Write data is
abnormal."
005A E0F1_E 2 00 0000000000000000000000 "CASHOUT RM2: SUM of PDL abnormal. SUM check error is
detected after normal completion of PDL."
005A E0FA_E 2 00 0000000000000000000000 "CASHOUT RM2: Data of PDL command abnormal. Chain Control
Data is abnormal."
005A E0FC_E 2 00 0000000000000000000000 "CASHOUT RM2: Data of PDL command abnormal. ID of CNTL is
not correct."
005A E0FD_E 2 00 0000000000000000000000 "CASHOUT RM2: Data of PDL command abnormal. BCC is not
correct."
005A E0FF_E 2 00 0000000000000000000000 "CASHOUT RM2: Data of PDL command abnormal. 2nd byte of
CNTL is not defined."
005A F001_E 2 00 0000000000000000000000 "CASHOUT RM2: Communication troubled between main
software and EBH. System error detected at EBH."
005A F002_E 2 00 0000000000000000000000 "CASHOUT RM2: Communication troubled between main
software and EBH. Time-out of WDT."
005A F003_E 2 00 0000000000000000000000 "CASHOUT RM2: Communication troubled between main
software and EBH."

U25604-J-Z745-1-7600 May 2011 125

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A F004_E 2 00 0000000000000000000000 "CASHOUT RM2: Communication troubled between main

software and EBH."
005A F029_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal.
Interface test of tray controller failed."
005A F025_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal.
Interface test of tray controller failed."
005A F02A_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal.
Interface test of tray controller failed."
005A F02B_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal.
Interface test of tray controller failed."
005A F02C_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal.
Interface test of tray controller failed."
005A F015_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal. Time-
out or receiving of NAK is detected."
005A F009_E 2 00 0000000000000000000000 "CASHOUT RM2: Memory data destroyed. Memory data
destroyed because of memory back-up dead."
005A F011_E 2 00 0000000000000000000000 "CASHOUT RM2: LAN of internal communication control
abnormal. Status abnormal at completion of transmission."
005A F027_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal.
Interface test of tray controller failed."
005A F013_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal."
005A F028_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal.
Interface test of tray controller failed."
005A F020_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal.
Interface test of tray controller failed."
005A F021_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal.
Interface test of tray controller failed."
005A F022_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal.
Interface test of tray controller failed."
005A F023_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal.
Interface test of tray controller failed."
005A F024_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal.
Interface test of tray controller failed."
005A F026_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal.
Interface test of tray controller failed."
005A F014_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal."
005A F012_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal."
005A F047_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray controller, transportation control sequence
abnormal."
005A F04B_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray controller, transportation control sequence
abnormal."
005A F02D_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal.
Interface test of tray controller failed."
005A F04A_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray controller, transportation control sequence
abnormal."
005A F02E_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal.
Interface test of tray controller failed."
005A F048_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray controller, transportation control sequence
abnormal."
005A F046_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray controller, transportation control sequence
abnormal."
005A F045_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray controller, transportation control sequence
abnormal."
005A F044_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray controller, transportation control sequence
abnormal."
005A F043_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray controller, transportation control sequence
abnormal."
005A F042_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray controller, transportation control sequence
abnormal."
005A F041_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray controller, transportation control sequence
abnormal."
005A F04D_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray controller, transportation control sequence
abnormal."
005A F031_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal."
005A F030_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal.
Interface test of tray controller failed."
005A F02F_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal.
Interface test of tray controller failed."
005A F091_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH internal communication abnormal."
005A F04E_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray controller, transportation control sequence
abnormal."

126 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A F04C_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray controller, transportation control sequence
abnormal."
005A F040_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray controller, transportation control sequence
abnormal."
005A F049_E 2 00 0000000000000000000000 "CASHOUT RM2: Tray controller, transportation control sequence
abnormal."
005A 408A_E 2 00 0000000000000000000000 "CASHOUT RM2: FL4 returned to home position, but S80
shielded."
005A 1029_E 2 00 0000000000000000000000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary
stack unit."
005A 904D_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error or hardware error.
EBH control carry out wording-of-a-telegram transmission at the
tray control"
005A 904E_E 2 00 0000000000000000000000 "CASHOUT RM2: EBH software control error or hardware error.
EBH control carry out wording-of-a-telegram transmission at the
BID"
005A 5017_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes can not be collected, because some part
of notes are already out of outlet."
005A 501A_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes can not be collected, because some part
of notes are already out of outlet, notes are already out of outlet
obliquely"
005A 501B_E 2 00 0000000000000000000000 "CASHOUT RM2: Notes can not be collected after no-dispensing."
005A 500B_E 2 00 0000000000000000000000 "CASHOUT RM2: S14 shielded "
005A 10E9_E 2 00 0000000000000000000000 "CASHOUT RM2: While in the pressure plate in Outlet Unit
controlled. It is generated according to illegal timing of SW1C
watch time-up event."
005A 10E6_E 2 00 0000000000000000000000 "CASHOUT RM2: While in the pressure plate in Outlet Unit
controlled. It is generated according to illegal timing of SW1C ON
or OFF event."
005A 00DC_E 2 00 0000000000000000000000 "CASHOUT RM2: Media may be remained in cassette D or sensor
is abnormal. *Detected by tray controller"
005A 3026_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam between S18 and S2B. Jam in path R."
005A 300B_E 2 00 0000000000000000000000 "CASHOUT RM2: Jam at rear of BID. Jam between S23 and S51."
005A 400B_E 2 00 0000000000000000000000 "CASHOUT RM2: S76 shielded at transportation: it must not be
shielded - media may be remained or sensor is abnormal.
*Detected by tray controller"
005A 8020_E 2 00 0000000000000000000000 "CASHOUT RM2: Many BID other error 1"
005A 8021_E 2 00 0000000000000000000000 "CASHOUT RM2: Many BID other error 2"
005A 8022_E 2 00 0000000000000000000000 "CASHOUT RM2: Many BID other error 3"
005A 8023_E 2 00 0000000000000000000000 "CASHOUT RM2: Many BID other error 4"
005A 8024_E 2 00 0000000000000000000000 "CASHOUT RM2: Many BID other error 5"

U25604-J-Z745-1-7600 May 2011 127

CSC-W32 Error Classes M-Status & M-Data Reference Tables

EBH Cash In (EBH/RM2) (Class: 005A_CIN)

The following table lists the M-Status and M-Data codes assigned to the Euro
Bank Note Handler class 005A_CIN. This class is set in case an error of the
EBH module has occurred in a cash in transaction.

Refer to section ”Error Class Mapping” on page 5.

Table 40: EBH Cash In (class: 005A_CIN)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
005A_CIN DEFA_E 2 99 005ADEFA000 "CASHOUT RM2: DEFAULT_ERROR"
00000000000
005A_CIN DEFA_W 2 99 005ADEFA000 "CASHOUT RM2: DEFAULT_WARNING"
00000000000
005A_CIN 0001_E 2 99 005A0001000 "CASHOUT RM2: 2nd byte of (CNTL) of command is undefined."
00000000000
005A_CIN 0002_E 2 99 005A0002000 "CASHOUT RM2: 0 or more than 100 in (Total) of (Stacking Limit Number of
00000000000 Notes) or 0 after calculation of (Media 16)."
005A_CIN 0004_E 2 99 005A0004000 "CASHOUT RM2: Number of notes is over total number of stackable notes."
00000000000
005A_CIN 0005_E 2 99 005A0005000 "CASHOUT RM2: Requested counts of bills was 0 or greater than 109."
00000000000
005A_CIN 0006_E 2 99 005A0006000 "CASHOUT RM2: Define note configuration command, (LNG) of "Note config-
00000000000 uration" is not correct."
005A_CIN 0007_E 2 99 005A0007000 "CASHOUT RM2: Define destination of deposit command, (LNG) of "Desti-
00000000000 nation information" is not correct."
005A_CIN 0008_E 2 99 005A0008000 "CASHOUT RM2: Define destination of dispense command, (LNG) of "Desti-
00000000000 nation information" is not correct."
005A_CIN 0009_E 2 99 005A0009000 "CASHOUT RM2: Define deposit function command, (LNG) of "Deposit
00000000000 Function" is not correct."
005A_CIN 000A_E 2 99 005A000A000 "CASHOUT RM2: Returning or storing is received when any note is not stacked
00000000000 in temporary stack unit."
005A_CIN 000C_E 2 99 005A000C000 "CASHOUT RM2: Define storing function command, (LNG) of "Storing
00000000000 Function" is not correct."
005A_CIN 000D_E 2 99 005A000D000 "CASHOUT RM2: (LNG) of "Transaction Number" is not correct."
00000000000
005A_CIN 000E_E 2 99 005A000E000 "CASHOUT RM2: Define destinatin of deposit command, "Distination infor-
00000000000 mation" is not correct."
005A_CIN 000F_E 2 99 005A000F000 "CASHOUT RM2: Fix recognition result of BIM command, (LNG) of "Fix Data"
00000000000 is not correct."
005A_CIN 0010_E 2 99 005A0010000 "CASHOUT RM2: Fix recognition result of BIM command, (Number) of "Fix
00000000000 Data" was 0 or greater than 128."
005A_CIN 0011_E 2 99 005A0011000 "CASHOUT RM2: Fix recognition result of BIM command, (Category) of "Fix
00000000000 Data" was 0 or greater than 4."
005A_CIN 0012_E 2 99 005A0012000 "CASHOUT RM2: Storing is received when cassettes are full or storable media
00000000000 is not set for cassette."
005A_CIN 0013_E 2 99 005A0013000 "CASHOUT RM2: Dispense is received when rejection unit is full."
00000000000
005A_CIN 0014_E 2 99 005A0014000 "CASHOUT RM2: Collecting is received when cassettes are full or storable
00000000000 media is not set for cassette."
005A_CIN 0015_E 2 99 005A0015000 "CASHOUT RM2: Define destination of deposit command, ""Distination infor-
00000000000 mation" is not possible to transport it."
005A_CIN 0017_E 2 99 005A0017000 "CASHOUT RM2: PDL transmitting command is received before PDL start
00000000000 command reception of BID or a cassette control part."
005A_CIN 0019_E 2 99 005A0019000 "CASHOUT RM2: PDL command is received, when PDL function for tray
00000000000 controller is not enabled."
005A_CIN 001A_E 2 99 005A001A000 "CASHOUT RM2: Command data error. When the storing cassette was full,
00000000000 there is no destination of the unfit note."

128 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A_CIN 001B_E 2 99 005A001B000 "CASHOUT RM2: Command data error. When the storing cassette was full,
00000000000 there is no destination of the L3 note."
005A_CIN 001C_E 2 99 005A001C000 "CASHOUT RM2: Command receiving timing abnormal. L2-Box is full."
00000000000
005A_CIN 001D_E 2 99 005A001D000 "CASHOUT RM2: Command receiving timing abnormal. Reject cassette is full
00000000000 before deposit."
005A_CIN 001E_E 2 99 005A001E000 "CASHOUT RM2: Command receiving timing abnormal. Transported cassette
00000000000 not installed before deposit."
005A_CIN 0020_E 2 99 005A0020000 "CASHOUT RM2: Command excluding PDL command is received, when PID
00000000000 processing for BID or tray controller is executed."
005A_CIN 0021_E 2 99 005A0021000 "CASHOUT RM2: Dispense is received, when the specified denomination lane
00000000000 is suppressed."
005A_CIN 0022_E 2 99 005A0022000 "CASHOUT RM2: Dispense is received, when the specified denomination lane
00000000000 is empty."
005A_CIN 002B_E 2 99 005A002B000 "CASHOUT RM2: Dispense is received, when the specified denomination lane
00000000000 is not set."
005A_CIN 002C_E 2 99 005A002C000 "CASHOUT RM2: Dispense is received, when the denomination of the
00000000000 specified lane is not set or the cassette is not set."
005A_CIN 0032_E 2 99 005A0032000 "CASHOUT RM2: Storable cassette is not installed."
00000000000
005A_CIN 0035_E 2 99 005A0035000 "CASHOUT RM2: Tray is not installed."
00000000000
005A_CIN 0036_E 2 99 005A0036000 "CASHOUT RM2: Media is remained in cassette A."
00000000000
005A_CIN 0037_E 2 99 005A0037000 "CASHOUT RM2: Media is remained in cassette B."
00000000000
005A_CIN 0038_E 2 99 005A0038000 "CASHOUT RM2: Media is remained in cassette C."
00000000000
005A_CIN 0039_E 2 99 005A0039000 "CASHOUT RM2: Media is remained in cassette D."
00000000000
005A_CIN 003A_E 2 99 005A003A000 "CASHOUT RM2: Media is remained in reject cassette."
00000000000
005A_CIN 003B_E 2 99 005A003B000 "CASHOUT RM2: Media is remained in collection cassette."
00000000000
005A_CIN 003D_E 2 99 005A003D000 "CASHOUT RM2: Storable cassette is full."
00000000000
005A_CIN 0040_E 2 99 005A0040000 "CASHOUT RM2: Data in (ID) of additional packet is not correct, undefined. Or
00000000000 data in (LNG) is not correct."
005A_CIN 0046_E 2 99 005A0046000 "CASHOUT RM2: Sense of operation detection test or end of operation
00000000000 detection test is received without receiving of start of operation detection test."
005A_CIN 004A_E 2 99 005A004A000 "CASHOUT RM2: Destination is not set in (Destination of Read / Write)."
00000000000
005A_CIN 004B_E 2 99 005A004B000 "CASHOUT RM2: Destination is not correct in (Destination of Read / Write)."
00000000000
005A_CIN 004C_E 2 99 005A004C000 "CASHOUT RM2: Data is not set in (Data for Cassette ID)."
00000000000
005A_CIN 004D_E 2 99 005A004D000 "CASHOUT RM2: Data is not correct in (Destination Information) in (Data for
00000000000 Cassette ID)."
005A_CIN 004F_E 2 99 005A004F000 "CASHOUT RM2: Data is not set in (Set Data for Cassette Adjustment) or not
00000000000 correct."
005A_CIN 0050_E 2 99 005A0050000 "CASHOUT RM2: Data is not set in (Set Data of Adjustment Value for Upper
00000000000 Unit) or not correct."
005A_CIN 0051_E 2 99 005A0051000 "CASHOUT RM2: Data is not correct in (Set Data for Cassette Adjustment)."
00000000000
005A_CIN 0053_E 2 99 005A0053000 "CASHOUT RM2: Data is not correct in (Set Data of Adjustment Value for
00000000000 Upper Unit)."
005A_CIN 0054_E 2 99 005A0054000 "CASHOUT RM2: Data is not set in (Set Data for Cassette Application) or not
00000000000 correct."
005A_CIN 0055_E 2 99 005A0055000 "CASHOUT RM2: Data is not correct in (Set Data for Cassette Application)."
00000000000
005A_CIN 0063_E 2 99 005A0063000 "CASHOUT RM2: Denomination information is not set."
00000000000
005A_CIN 0064_E 2 99 005A0064000 "CASHOUT RM2: Destination information is not set."
00000000000
005A_CIN 0065_E 2 99 005A0065000 "CASHOUT RM2: Destination information is not set."
00000000000
005A_CIN 0066_E 2 99 005A0066000 "CASHOUT RM2: Deposit function is not set."
00000000000
005A_CIN 0067_E 2 99 005A0067000 "CASHOUT RM2: Storing function is not set."
00000000000

U25604-J-Z745-1-7600 May 2011 129

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A_CIN 0068_E 2 99 005A0068000 "CASHOUT RM2: Transaction number is not set."

00000000000
005A_CIN 0069_E 2 99 005A0069000 "CASHOUT RM2: Transaction number is not set."
00000000000
005A_CIN 006A_E 2 99 005A006A000 "CASHOUT RM2: Transaction number is not set."
00000000000
005A_CIN 006B_E 2 99 005A006B000 "CASHOUT RM2: Transaction number is not set."
00000000000
005A_CIN 006C_E 2 99 005A006C000 "CASHOUT RM2: Transaction number is not set."
00000000000
005A_CIN 006D_E 2 99 005A006D000 "CASHOUT RM2: Transaction number is not set."
00000000000
005A_CIN 006E_E 2 99 005A006E000 "CASHOUT RM2: Transaction number is not set."
00000000000
005A_CIN 006F_E 2 99 005A006F000 "CASHOUT RM2: Transaction number is not set."
00000000000
005A_CIN 0070_E 2 99 005A0070000 "CASHOUT RM2: Data in (Log ID) ACT is not set or data in (LNG) is not
00000000000 correct."
005A_CIN 0071_E 2 99 005A0071000 "CASHOUT RM2: Data in (Stacking Limit Number of Notes) is not set or data
00000000000 in (LNG) is not correct."
005A_CIN 0073_E 2 99 005A0073000 "CASHOUT RM2: There was no requested number of bills to be dispensed, or
00000000000 the data length LNG was incorrect."
005A_CIN 0074_E 2 99 005A0074000 "CASHOUT RM2: Transaction number is not set."
00000000000
005A_CIN 0075_E 2 99 005A0075000 "CASHOUT RM2: Data in (Time) is not set or data in (LNG) is not correct."
00000000000
005A_CIN 0076_E 2 99 005A0076000 "CASHOUT RM2: Transaction number is not set."
00000000000
005A_CIN 0077_E 2 99 005A0077000 "CASHOUT RM2: BID command is not set."
00000000000
005A_CIN 0078_E 2 99 005A0078000 "CASHOUT RM2: The transportation destinations of level 3 are not united by
00000000000 all denominations."
005A_CIN 0079_E 2 99 005A0079000 "CASHOUT RM2: Fix data is not set."
00000000000
005A_CIN 007A_E 2 99 005A007A000 "CASHOUT RM2: Command data of define note configuration abnormal. The
00000000000 data length of the packet was specified 258 bytes or more."
005A_CIN 007B_E 2 99 005A007B000 "CASHOUT RM2: Command data of transmission of PDL data abnormal. The
00000000000 data length of the packet was specified 994 bytes or more."
005A_CIN 007C_E 2 99 005A007C000 "CASHOUT RM2: Command data of maintenance commands abnormal. The
00000000000 packet of the data length in 258 bytes or more was specified."
005A_CIN 007D_E 2 99 005A007D000 "CASHOUT RM2: Command data of set maximum number of retract box
00000000000 abnormal. Maximum number is not set."
005A_CIN 007E_E 2 99 005A007E000 "CASHOUT RM2: The specified command data of “Define Storing Function”
00000000000 was abnormal."
005A_CIN 007F_E 2 99 005A007F000 "CASHOUT RM2: The specified command data of "Define Skew Threshold"
00000000000 was abnormal. The"
005A_CIN 0080_E 2 99 005A0080000 "CASHOUT RM2: Data in (Current Date and Time) is abnormal or data in (LNG)
00000000000 is not correct."
005A_CIN 0083_E 2 99 005A0083000 "CASHOUT RM2: Set data of the number of remaining bills was invalid, or the
00000000000 data length LNG was incorrect."
005A_CIN 0084_E 2 99 005A0084000 "CASHOUT RM2: Data in (Set of Abnormal Notes) is abnormal or data in (LNG)
00000000000 is not correct."
005A_CIN 0086_E 2 99 005A0086000 "CASHOUT RM2: Data in (Set of Numbers for Full/Near-full) is abnormal or
00000000000 data in (LNG) is not correct."
005A_CIN 0087_E 2 99 005A0087000 "CASHOUT RM2: BID command data in (LNG) is not correct."
00000000000
005A_CIN 0088_E 2 99 005A0088000 "CASHOUT RM2: Storing media for overflow is not correct."
00000000000
005A_CIN 0089_E 2 99 005A0089000 "CASHOUT RM2: Storing media for cartridge is not correct."
00000000000
005A_CIN 008C_E 2 99 005A008C000 "CASHOUT RM2: Data in (Module Number) of (Set of Deposit Function) is
00000000000 abnormal or data in (LNG) is not correct."
005A_CIN 008E_E 2 99 005A008E000 "CASHOUT RM2: Set denomination for the cassette was invalid, or the data
00000000000 length LNG was incorrect."
005A_CIN 008F_E 2 99 005A008F000 "CASHOUT RM2: Duplicated data is set in (Cassette Denomination Setting) or
00000000000 data in (LNG) is not correct."
005A_CIN 0090_E 2 99 005A0090000 "CASHOUT RM2: Length of whole command is not correct."
00000000000
005A_CIN 0091_E 2 99 005A0091000 "CASHOUT RM2: Data in (BCW) is not correct."
00000000000

130 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A_CIN 0092_E 2 99 005A0092000 "CASHOUT RM2: 1st byte of (CNTL) is undefined."

00000000000
005A_CIN 0093_E 2 99 005A0093000 "CASHOUT RM2: Data for (ID) in (CNTL) is not set."
00000000000
005A_CIN 0094_E 2 99 005A0094000 "CASHOUT RM2: Data in (LNG) of (CNTL) is not correct."
00000000000
005A_CIN 0095_E 2 99 005A0095000 "CASHOUT RM2: Status sense or unexpected command is received after
00000000000 WDT-out."
005A_CIN 0096_E 2 99 005A0096000 "CASHOUT RM2: Status sense or unexpected command is received after
00000000000 power-down during execution."
005A_CIN 0097_E 2 99 005A0097000 "CASHOUT RM2: Status sense or unexpected command is received during
00000000000 mechanical down."
005A_CIN 0098_E 2 99 005A0098000 "CASHOUT RM2: Status sense or unexpected command is received after
00000000000 receiving of stop."
005A_CIN 0099_E 2 99 005A0099000 "CASHOUT RM2: Status sense or unexpected command is received after
00000000000 detection of mechanical down."
005A_CIN 009A_E 2 99 005A009A000 "CASHOUT RM2: It is mechanism operation command reception before data
00000000000 write command reception."
005A_CIN 009D_E 2 99 005A009D000 "CASHOUT RM2: Data in [Kind of Safe Pass] is abnormal or Data in [LNG] is
00000000000 not correct."
005A_CIN 009E_E 2 99 005A009E000 "CASHOUT RM2: Data in (Priority level of Dispense) is abnormal or data in
00000000000 (LNG) is not correct."
005A_CIN 00A0_E 2 99 005A00A0000 "CASHOUT RM2: Data in (ACT) of feed start command to tray controller is not
00000000000 correct."
005A_CIN 00A1_E 2 99 005A00A1000 "CASHOUT RM2: Data in (ACT) of storing start command to tray controller is
00000000000 not correct."
005A_CIN 00A2_E 2 99 005A00A2000 "CASHOUT RM2: Data in (ACT) of reset-conveyance command to tray
00000000000 controller is not correct."
005A_CIN 00A3_E 2 99 005A00A3000 "CASHOUT RM2: Data in (ACT) of motor speed change command to tray
00000000000 controller is not correct."
005A_CIN 00B0_E 2 99 005A00B0000 "CASHOUT RM2: Define destination of dispense command "Destination infor-
00000000000 mation" is not correct."
005A_CIN 00B1_E 2 99 005A00B1000 "CASHOUT RM2: Define deposit function command "Deposit Function" is not
00000000000 correct."
005A_CIN 1001_E 2 99 005A1001000 "CASHOUT RM2: I/O module: shutter closed, money in, a note stucks out of
00000000000 the bundle."
005A_CIN 1002_E 2 99 005A1002000 "CASHOUT RM2: I/O module: shutter cannot be opened."
00000000000
005A_CIN 1003_E 2 99 005A1003000 "CASHOUT RM2: I/O module: shutter should open but fork light sensor
00000000000 broken."
005A_CIN 1004_E 2 99 005A1004000 "CASHOUT RM2: I/O module: shutter should open but fork light sensor
00000000000 broken."
005A_CIN 1005_E 2 99 005A1005000 "CASHOUT RM2: Solenoid (SL14) or switch (SW19) abnormal. There is a
00000000000 possibility broken."
005A_CIN 1006_E 2 99 005A1006000 "CASHOUT RM2: Shutter error. Switch (SW17=OFF, SW18=ON) abnormal "
00000000000
005A_CIN 1007_E 2 99 005A1007000 "CASHOUT RM2: Shutter blocked during closing."
00000000000
005A_CIN 1008_E 2 99 005A1008000 "CASHOUT RM2: Shutter blocked during opening."
00000000000
005A_CIN 1009_E 2 99 005A1009000 "CASHOUT RM2: I/O module: the inner upper tray does not reach the upper
00000000000 end position."
005A_CIN 100D_E 2 99 005A100D000 "CASHOUT RM2: I/O module: shutter closed SW18 wrong."
00000000000
005A_CIN 100E_E 2 99 005A100E000 "CASHOUT RM2: I/O module: shutter closed possible not locked, SW19
00000000000 wrong."
005A_CIN 100F_E 2 99 005A100F000 "CASHOUT RM2: I/O module "
00000000000
005A_CIN 1010_E 2 99 005A1010000 "CASHOUT RM2: An abnormal rotation of the motor (DM11) was detected
00000000000 when the note was dispensed from the outlet."
005A_CIN 1011_E 2 99 005A1011000 "CASHOUT RM2: An abnormal rotation of the motor (DM18) was detected
00000000000 when the note was dispensed from the outlet."
005A_CIN 1012_E 2 99 005A1012000 "CASHOUT RM2: An abnormal rotation of the motor (DM18) was detected
00000000000 when the note accumulated to the outlet."
005A_CIN 1013_E 2 99 005A1013000 "CASHOUT RM2: Dispensing at the outlet is abnormal."
00000000000
005A_CIN 1014_E 2 99 005A1014000 "CASHOUT RM2: Dispensing at the outlet is abnormal."
00000000000
005A_CIN 1015_E 2 99 005A1015000 "CASHOUT RM2: Dispensing at the outlet is abnormal. (The stop interrupt of
00000000000 the motor doesn`t enter while the motor is stopping. The motor cannot stop.)"

U25604-J-Z745-1-7600 May 2011 131

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A_CIN 1016_E 2 99 005A1016000 "CASHOUT RM2: Dispensing at the outlet is abnormal (during dispensing jam
00000000000 at S2B)."
005A_CIN 1017_E 2 99 005A1017000 "CASHOUT RM2: Dispensing at the outlet is abnormal (during dispensing jam
00000000000 at S2B)."
005A_CIN 1031_E 2 99 005A1031000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
00000000000
005A_CIN 1032_E 2 99 005A1032000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack
00000000000 unit.DM31 stopped because of detection of SW39 ON."
005A_CIN 1033_E 2 99 005A1033000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit.
00000000000 DM31 stopped because of detection of SW3A ON."
005A_CIN 1034_E 2 99 005A1034000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
00000000000
005A_CIN 1035_E 2 99 005A1035000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
00000000000
005A_CIN 1036_E 2 99 005A1036000 "CASHOUT RM2: Pressure mechanism abnormal at temporary stack unit,
00000000000 DM31 ON, but SW3A not ON."
005A_CIN 1037_E 2 99 005A1037000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
00000000000
005A_CIN 1038_E 2 99 005A1038000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit.
00000000000 DM31 ON, but SW39 not lighted."
005A_CIN 1039_E 2 99 005A1039000 "CASHOUT RM2: Pressure Mechanism at Escrow Unit is abnormal (DM31 ON,
00000000000 but SW3A not lighted)"
005A_CIN 103A_E 2 99 005A103A000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
00000000000
005A_CIN 103B_E 2 99 005A103B000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
00000000000
005A_CIN 103C_E 2 99 005A103C000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
00000000000
005A_CIN 103D_E 2 99 005A103D000 "CASHOUT RM2: DM32 is tried to rotate for reverse direction at position of
00000000000 shelter, but not rotated."
005A_CIN 103E_E 2 99 005A103E000 "CASHOUT RM2: DM32 is tried to rotate for reverse direction at position of
00000000000 dispensing, but not rotated."
005A_CIN 103F_E 2 99 005A103F000 "CASHOUT RM2: DM32 is tried to rotate for reverse direction after no-
00000000000 dispensing, but not rotated."
005A_CIN 1049_E 2 99 005A1049000 "CASHOUT RM2: DM40 not stopped at high-speed rotation or low-speed
00000000000 rotation."
005A_CIN 104A_E 2 99 005A104A000 "CASHOUT RM2: Speed not arrived to 70% of standard-speed after rotation,
00000000000 retries failed."
005A_CIN 104B_E 2 99 005A104B000 "CASHOUT RM2: Speed not arrived to 70% of standard-speed after rotation,
00000000000 retries failed."
005A_CIN 104C_E 2 99 005A104C000 "CASHOUT RM2: Speed dropped down at high-speed rotation or low-speed
00000000000 rotation."
005A_CIN 104D_E 2 99 005A104D000 "CASHOUT RM2: Speed too fast based on standard-speed at rotation of high-
00000000000 speed or low-speed."
005A_CIN 104E_E 2 99 005A104E000 "CASHOUT RM2: Speed too slow based on standard-speed at rotation of high-
00000000000 speed or low-speed."
005A_CIN 104F_E 2 99 005A104F000 "CASHOUT RM2: Speed not arrived to 70% of standard-speed after rotation at
00000000000 reset transportation, retries failed."
005A_CIN 107D_E 2 99 005A107D000 "CASHOUT RM2: DM32 is tried to rotate for normal direction, but not rotated -
00000000000 DM32 may be locked."
005A_CIN 107E_E 2 99 005A107E000 "CASHOUT RM2: Rotation of DM32 can not be checked at normal rotation -
00000000000 DM32 may be locked."
005A_CIN 107F_E 2 99 005A107F000 "CASHOUT RM2: DM32 not stopped by stop indication - DM32 may be
00000000000 locked."
005A_CIN 10A0_E 2 99 005A10A0000 "CASHOUT RM2: Cassette: motor inside cassette A does not turn. It is tried to
00000000000 start the motor (DMA2) while conveying."
005A_CIN 10A1_E 2 99 005A10A1000 "CASHOUT RM2: Cassette: motor inside cassette B does not turn. It is tried to
00000000000 start the motor (DMB2) while conveying."
005A_CIN 10A2_E 2 99 005A10A2000 "CASHOUT RM2: Cassette: motor inside cassette C does not turn. It is tried to
00000000000 start the motor (DMC2) while conveying."
005A_CIN 10A3_E 2 99 005A10A3000 "CASHOUT RM2: Cassette: motor inside cassette D does not turn. It is tried to
00000000000 start the motor (DMD2) while conveying."
005A_CIN 10AE_E 2 99 005A10AE000 "CASHOUT RM2: The interrupt of a hard timer did not enter, while cash-out
00000000000 from cassette A."
005A_CIN 10AF_E 2 99 005A10AF000 "CASHOUT RM2: It is tried to start the motor (DMA2) while conveying, but it
00000000000 didn't run."
005A_CIN 10BE_E 2 99 005A10BE000 "CASHOUT RM2: The interrupt of a hard timer did not enter, while cash-out
00000000000 from cassette B."
005A_CIN 10BF_E 2 99 005A10BF000 "CASHOUT RM2: It is tried to start the motor (DMB2) while conveying, but it
00000000000 didn't run."

132 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A_CIN 10CE_E 2 99 005A10CE000 "CASHOUT RM2: The interrupt of a hard timer did not enter, while cash-out
00000000000 from cassette C."
005A_CIN 10CF_E 2 99 005A10CF000 "CASHOUT RM2: It is tried to start the motor (DMC2) while conveying, but it
00000000000 didn't run."
005A_CIN 10DE_E 2 99 005A10DE000 "CASHOUT RM2: The interrupt of a hard timer did not enter, while cash-out
00000000000 from cassette D."
005A_CIN 10DF_E 2 99 005A10DF000 "CASHOUT RM2: It is tried to start the motor (DMD2) while conveying, but it
00000000000 didn't run."
005A_CIN 10E0_E 2 99 005A10E0000 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
00000000000 generated according to illegal timing of watch timer event."
005A_CIN 10E1_E 2 99 005A10E1000 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
00000000000 generated according to illegal timing of SW11 ON or OFF event."
005A_CIN 10E2_E 2 99 005A10E2000 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
00000000000 generated according to illegal timing of SW13 ON or OFF event."
005A_CIN 10E3_E 2 99 005A10E3000 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
00000000000 generated according to illegal timing of SW17 ON or OFF event."
005A_CIN 10E4_E 2 99 005A10E4000 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
00000000000 generated according to illegal timing of SW18 ON or OFF event."
005A_CIN 10E5_E 2 99 005A10E5000 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
00000000000 generated according to illegal timing of SW19 ON or OFF event."
005A_CIN 10E7_E 2 99 005A10E7000 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
00000000000 generated according to illegal timing of SW11 watch time-up event."
005A_CIN 10E8_E 2 99 005A10E8000 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
00000000000 generated according to illegal timing of SW13 watch time-up event."
005A_CIN 10EA_E 2 99 005A10EA000 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
00000000000 generated according to illegal timing of low-pressure plate watch time-up
event."
005A_CIN 10EB_E 2 99 005A10EB000 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
00000000000 generated according to illegal timing of up-pressure plate watch time-up event."
005A_CIN 10EC_E 2 99 005A10EC000 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
00000000000 generated according to illegal timing of PM12 stop event."
005A_CIN 10ED_E 2 99 005A10ED000 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled, It is
00000000000 generated according to illegal timing of PM19 stop event."
005A_CIN 10EE_E 2 99 005A10EE000 "CASHOUT RM2: While in the pressure plate in IN/OUT module controlled, it
00000000000 is generated according to illegal timing of SW11 and SW13 watch time-up
event."
005A_CIN 10EF_E 2 99 005A10EF000 "CASHOUT RM2: While in the pressure plate in IN/OUT module controlled, it
00000000000 is generated according to illegal timing of Feed Moter phase watch time-up
event."
005A_CIN 10F0_E 2 99 005A10F0000 "CASHOUT RM2: While in the pressure plate in IN/OUT module controled,
00000000000 after PM12 stops, SW11: as turning on."
005A_CIN 2010_E 2 99 005A2010000 "CASHOUT RM2: DM11 rotated for normal direction, but S16 and S1A both not
00000000000 shielded - No-dispensing detected for five times."
005A_CIN 2020_E 2 99 005A2020000 "CASHOUT RM2: DM18 rotated for normal direction, but S2B not shielded -
00000000000 No-dispensing detected for five times."
005A_CIN 2030_E 2 99 005A2030000 "CASHOUT RM2: DM32 rotated for normal direction, but S33 and S34 both not
00000000000 shielded -"
005A_CIN 20A0_E 2 99 005A20A0000 "CASHOUT RM2: Note jam during dispensing in Cassette A."
00000000000
005A_CIN 20A2_E 2 99 005A20A2000 "CASHOUT RM2: Running out of notes in Cassette A."
00000000000
005A_CIN 20B0_E 2 99 005A20B0000 "CASHOUT RM2: Note jam during dispensing in Cassette B."
00000000000
005A_CIN 20B2_E 2 99 005A20B2000 "CASHOUT RM2: Running out of notes in cassette B."
00000000000
005A_CIN 20C0_E 2 99 005A20C0000 "CASHOUT RM2: Note jam during dispensing in Cassette C."
00000000000
005A_CIN 20C2_E 2 99 005A20C2000 "CASHOUT RM2: Running out of notes in cassette C."
00000000000
005A_CIN 20D0_E 2 99 005A20D0000 "CASHOUT RM2: Note jam during dispensing in Cassette D."
00000000000
005A_CIN 20D2_E 2 99 005A20D2000 "CASHOUT RM2: Running out of notes in cassette D."
00000000000
005A_CIN 3001_E 2 99 005A3001000 "CASHOUT RM2: EBH down, because length between two notes is too short
00000000000 at S51. Two notes run into each other, this could happen during cash-in to
ESCROW"
005A_CIN 3002_E 2 99 005A3002000 "CASHOUT RM2: EBH down, because length between two notes is too short
00000000000 at S52. The notes could be slowed down at ESCROW deflector FL2."
005A_CIN 3003_E 2 99 005A3003000 "CASHOUT RM2: EBH down, because length between two Notes is too short
00000000000 at S44."
005A_CIN 3016_E 2 99 005A3016000 "CASHOUT RM2: Sensor shielded more than predefined time Jam at S16 or
00000000000 S1A. Jam at dispenser slot lower inner tray of I/O module."

U25604-J-Z745-1-7600 May 2011 133

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A_CIN 3018_E 2 99 005A3018000 "CASHOUT RM2: Sensor shielded more than predefined time Jam at S18."
00000000000
005A_CIN 301A_E 2 99 005A301A000 "CASHOUT RM2: Jam between S16 / S1A and S18. Jam at dispenser slot
00000000000 lower inner tray of I/O module and path R."
005A_CIN 3023_E 2 99 005A3023000 "CASHOUT RM2: Sensor shielded more than predefined time jam at S23. Jam
00000000000 at input slot of BEB reader."
005A_CIN 3027_E 2 99 005A3027000 "CASHOUT RM2: Jam between S44 and S2B. Jam in path F and or central-
00000000000 ization station."
005A_CIN 3028_E 2 99 005A3028000 "CASHOUT RM2: Jam between S18 and S23. Jam between path R and BEB
00000000000 reader."
005A_CIN 302A_E 2 99 005A302A000 "CASHOUT RM2: Jam between S68 and S23. Jam in path R."
00000000000
005A_CIN 302B_E 2 99 005A302B000 "CASHOUT RM2: Sensor shielded more than predefined time. Jam at S2B.
00000000000 Jam in I/O module at dispensing slot inner upper tray."
005A_CIN 302C_E 2 99 005A302C000 "CASHOUT RM2: Jam at rear of returning stack unit. Jam between S44 and
00000000000 S23. Jam in path F and or centralization station."
005A_CIN 302D_E 2 99 005A302D000 "CASHOUT RM2: Jam between S68 and S23. Jam in path R."
00000000000
005A_CIN 302E_E 2 99 005A302E000 "CASHOUT RM2: Jam between S65/S66/S67 and S2B. Jam in path F, just
00000000000 before input slot upper inner tray of I/O module."
005A_CIN 302F_E 2 99 005A302F000 "CASHOUT RM2: Jam between path unit (F) and BID unit. Jam between S60
00000000000 and S23. Jam in path R between cash-out slot of safe and BEB reader."
005A_CIN 3033_E 2 99 005A3033000 "CASHOUT RM2: Jam at S33 or S34. Jam inside of the ESCROW."
00000000000
005A_CIN 303A_E 2 99 005A303A000 "CASHOUT RM2: Jam at rear of temporary stack unit. Jam between S33/S34
00000000000 and S53. Jam inside of the ESCROW at the dispensing slot."
005A_CIN 3044_E 2 99 005A3044000 "CASHOUT RM2: Jam at of returning stack unit. Jam at S44. Jam in path F."
00000000000
005A_CIN 3045_E 2 99 005A3045000 "CASHOUT RM2: Jam at S45. Jam in path F."
00000000000
005A_CIN 3047_E 2 99 005A3047000 "CASHOUT RM2: Jam in path F under the ESCROW. Jam between S52 and
00000000000 S44."
005A_CIN 304A_E 2 99 005A304A000 "CASHOUT RM2: Jam at rear of Outlet Jam between S45 and S18. Jam in path
00000000000 R."
005A_CIN 304B_E 2 99 005A304B000 "CASHOUT RM2: Jam at front of returning stack unit. Jam between S52 and
00000000000 S44. Jam in path F."
005A_CIN 304E_E 2 99 005A304E000 "CASHOUT RM2: Jam at rear temporary stack unit. Jam between S53 and
00000000000 S44. Jam in path F, especially under the ESCROW."
005A_CIN 304F_E 2 99 005A304F000 "CASHOUT RM2: Jam at rear temporary stack unit. Jam between S51 and
00000000000 S44. Jam in path F."
005A_CIN 3050_E 2 99 005A3050000 "CASHOUT RM2: Jam at S50. Jam in input slot of ESCROW."
00000000000
005A_CIN 3051_E 2 99 005A3051000 "CASHOUT RM2: Jam at S51. Jam in path F at ESCROW output slot."
00000000000
005A_CIN 3052_E 2 99 005A3052000 "CASHOUT RM2: Jam at S52. Jam in path F at ESCROW output slot."
00000000000
005A_CIN 3053_E 2 99 005A3053000 "CASHOUT RM2: Jam at S53. Jam in path F at ESCROW output slot."
00000000000
005A_CIN 3054_E 2 99 005A3054000 "CASHOUT RM2: Jam at S54. Jam at safe input transport."
00000000000
005A_CIN 3055_E 2 99 005A3055000 "CASHOUT RM2: Jam at S55 Sensor shielded more than predefined time. Jam
00000000000 at entrance of L2 box."
005A_CIN 3058_E 2 99 005A3058000 "CASHOUT RM2: Jam between S51 and S55."
00000000000
005A_CIN 3059_E 2 99 005A3059000 "CASHOUT RM2: Jam between S54 and S70. Jam within the rear safe
00000000000 transport (cash-in to safe)."
005A_CIN 305A_E 2 99 005A305A000 "CASHOUT RM2: Jam at front of temporary Stack Unit Jam between S52 and
00000000000 S50. Jam in path F right in front of ESCROW."
005A_CIN 305B_E 2 99 005A305B000 "CASHOUT RM2: Jam between S23 and S51."
00000000000
005A_CIN 305C_E 2 99 005A305C000 "CASHOUT RM2: Jam at rear of temporary stack unit. Jam between S53 and
00000000000 S52."
005A_CIN 305D_E 2 99 005A305D000 "CASHOUT RM2: Jam at rear of BID. Jam between S51 and S52."
00000000000
005A_CIN 305E_E 2 99 005A305E000 "CASHOUT RM2: Jam at rear of BID. Jam between S23 and S52."
00000000000
005A_CIN 305F_E 2 99 005A305F000 "CASHOUT RM2: Jam at path unit(R) in front of the entrance of flat path. Jam
00000000000 between S51 and S54."
005A_CIN 3060_E 2 99 005A3060000 "CASHOUT RM2: Jam at S60. Jam at safe transport (cash-out from safe) under
00000000000 I/O module."

134 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A_CIN 3062_E 2 99 005A3062000 "CASHOUT RM2: Jam at the entrance of cassette A. Jam at SA0. Exceeding
00000000000 stipulated time, SA0 had turned ON."
005A_CIN 3063_E 2 99 005A3063000 "CASHOUT RM2: Jam at the entrance of cassette B. Jam at SB0. Exceeding
00000000000 stipulated time, SB0 had turned ON."
005A_CIN 3064_E 2 99 005A3064000 "CASHOUT RM2: Jam at the entrance of cassette C. Jam at SC0. Exceeding
00000000000 stipulated time, SC0 had turned ON."
005A_CIN 3065_E 2 99 005A3065000 "CASHOUT RM2: Jam at S65,S66 or S67. Sensor shielded more than
00000000000 predefined time. Jam at path F near I/O module."
005A_CIN 3067_E 2 99 005A3067000 "CASHOUT RM2: Jam at the entrance of cssette ID. Jam at SD0. Exceeding
00000000000 stipulated time, SD0 had turned ON."
005A_CIN 3068_E 2 99 005A3068000 "CASHOUT RM2: Jam at S68. Sensor shielded more than predefined time.
00000000000 Jam at path F near I/O module."
005A_CIN 306B_E 2 99 005A306B000 "CASHOUT RM2: Jam between the exit of flat path and the entrance of path
00000000000 unit (F). Jam between S79 and S60."
005A_CIN 306E_E 2 99 005A306E000 "CASHOUT RM2: Jam between S44 and S65/S66/S67. Jam in path F."
00000000000
005A_CIN 306F_E 2 99 005A306F000 "CASHOUT RM2: Half-size media is remained between S16 / S1A and S65 /
00000000000 S66 / S67. Half of a note stucking between dispensing slot (cash-in, lower inner
tray in I/O module)"
005A_CIN 3070_E 2 99 005A3070000 "CASHOUT RM2: Jam at S70. Sensor shielded more than predefined time.
00000000000 *Detected by tray controller."
005A_CIN 3071_E 2 99 005A3071000 "CASHOUT RM2: Jam at S71. Sensor shielded more than predefined time.
00000000000 *Detected by tray controller"
005A_CIN 3072_E 2 99 005A3072000 "CASHOUT RM2: Jam at S72. Sensor shielded more than predefined time.
00000000000 *Detected by tray controller "
005A_CIN 3073_E 2 99 005A3073000 "CASHOUT RM2: Jam at S73. Sensor shielded more than predefined time.
00000000000 *Detected by tray controller"
005A_CIN 3074_E 2 99 005A3074000 "CASHOUT RM2: Jam at S74. Sensor shielded more than predefined time.
00000000000 *Detected by tray controller"
005A_CIN 3075_E 2 99 005A3075000 "CASHOUT RM2: Jam at S75. Sensor shielded more than predefined time.
00000000000 *Detected by tray controller"
005A_CIN 3076_E 2 99 005A3076000 "CASHOUT RM2: Jam at S76. Sensor shielded more than predefined time.
00000000000 *Detected by tray controller"
005A_CIN 3077_E 2 99 005A3077000 "CASHOUT RM2: Jam at S77. Sensor shielded more than predefined time.
00000000000 *Detected by tray controller"
005A_CIN 3078_E 2 99 005A3078000 "CASHOUT RM2: Jam at S78. Sensor shielded more than predefined time.
00000000000 *Detected by tray controller"
005A_CIN 3079_E 2 99 005A3079000 "CASHOUT RM2: Jam at S79. Sensor shielded more than predefined time.
00000000000 *Detected by tray controller"
005A_CIN 307A_E 2 99 005A307A000 "CASHOUT RM2: Jam between S71 and S73 or jam between S72 and S73.
00000000000 *Detected by tray controller"
005A_CIN 307B_E 2 99 005A307B000 "CASHOUT RM2: Jam between S73 and S75 or jam between S74 and S75.
00000000000 *Detected by tray controller"
005A_CIN 307C_E 2 99 005A307C000 "CASHOUT RM2: Jam between S75 and S77 or jam between S76 and S77.
00000000000 *Detected by tray controller"
005A_CIN 307D_E 2 99 005A307D000 "CASHOUT RM2: Jam between S77 and S79 or jam between S78 and S79.
00000000000 *Detected by tray controller"
005A_CIN 307E_E 2 99 005A307E000 "CASHOUT RM2: Jam between S51 and S70. *Detected by tray controller "
00000000000
005A_CIN 3080_E 2 99 005A3080000 "CASHOUT RM2: Jam at SY1. Sensor shielded more than predefined time.
00000000000 *Detected by tray controller"
005A_CIN 3081_E 2 99 005A3081000 "CASHOUT RM2: Jam at SY0. Sensor shielded more than predefined time.
00000000000 *Detected by tray controller"
005A_CIN 3086_E 2 99 005A3086000 "CASHOUT RM2: Jam between S75 and S76. *Detected by tray controller."
00000000000
005A_CIN 3087_E 2 99 005A3087000 "CASHOUT RM2: Jam between S75 and S77. *Detected by tray controller "
00000000000
005A_CIN 3088_E 2 99 005A3088000 "CASHOUT RM2: Jam between S77 and S78. *Detected by tray controller."
00000000000
005A_CIN 3089_E 2 99 005A3089000 "CASHOUT RM2: Jam between S77 and S79. *Detected by tray controller "
00000000000
005A_CIN 308A_E 2 99 005A308A000 "CASHOUT RM2: Jam between S70 and SY1. *Detected by tray controller "
00000000000
005A_CIN 308B_E 2 99 005A308B000 "CASHOUT RM2: Jam between S70 and S71. *Detected by tray controller "
00000000000
005A_CIN 308C_E 2 99 005A308C000 "CASHOUT RM2: Jam between S71 and S72. *Detected by tray controller "
00000000000
005A_CIN 308D_E 2 99 005A308D000 "CASHOUT RM2: Jam between S71 and S73. *Detected by tray controller "
00000000000
005A_CIN 308E_E 2 99 005A308E000 "CASHOUT RM2: Jam between S73 and S74. *Detected by tray controller "
00000000000

U25604-J-Z745-1-7600 May 2011 135

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A_CIN 308F_E 2 99 005A308F000 "CASHOUT RM2: Jam between S73 and S74. *Detected by tray controller "
00000000000
005A_CIN 3090_E 2 99 005A3090000 "CASHOUT RM2: Jam between S70 and SY0. *Detected by tray controller "
00000000000
005A_CIN 30A1_E 2 99 005A30A1000 "CASHOUT RM2: Handling of notes slow after BID length between two notes
00000000000 is too short at S51. *Detected by tray controller"
005A_CIN 30A3_E 2 99 005A30A3000 "CASHOUT RM2: Handling of notes slow before FL5 length between two notes
00000000000 is too short at S70 *Detected by tray controller"
005A_CIN 30A4_E 2 99 005A30A4000 "CASHOUT RM2: Handling of notes slow before FL6 length between two notes
00000000000 is too short at S71 *Detected by tray controller"
005A_CIN 30A5_E 2 99 005A30A5000 "CASHOUT RM2: Handling of notes slow before FL7 length between two notes
00000000000 is too short at S72 *Detected by tray controller"
005A_CIN 30A6_E 2 99 005A30A6000 "CASHOUT RM2: Length between two notes is too short at S73. Handling of
00000000000 notes slow before FL8."
005A_CIN 4016_E 2 99 005A4016000 "CASHOUT RM2: S16 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal."
005A_CIN 4018_E 2 99 005A4018000 "CASHOUT RM2: S18 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal."
005A_CIN 401A_E 2 99 005A401A000 "CASHOUT RM2: S1A shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal."
005A_CIN 4023_E 2 99 005A4023000 "CASHOUT RM2: S23 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal."
005A_CIN 402B_E 2 99 005A402B000 "CASHOUT RM2: S2B shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal."
005A_CIN 402C_E 2 99 005A402C000 "CASHOUT RM2: FL3 returned to home position, but S65, S66, S67 shielded."
00000000000
005A_CIN 402D_E 2 99 005A402D000 "CASHOUT RM2: FL3 returned to opposite position, but S23 shielded."
00000000000
005A_CIN 4033_E 2 99 005A4033000 "CASHOUT RM2: S33 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal."
005A_CIN 4034_E 2 99 005A4034000 "CASHOUT RM2: S34 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal."
005A_CIN 4044_E 2 99 005A4044000 "CASHOUT RM2: S44 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal."
005A_CIN 4045_E 2 99 005A4045000 "CASHOUT RM2: S45 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal."
005A_CIN 404C_E 2 99 005A404C000 "CASHOUT RM2: FL2 returned to opposite position, but S44 shielded."
00000000000
005A_CIN 4050_E 2 99 005A4050000 "CASHOUT RM2: S50 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal."
005A_CIN 4051_E 2 99 005A4051000 "CASHOUT RM2: S51 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal."
005A_CIN 4052_E 2 99 005A4052000 "CASHOUT RM2: S52 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal."
005A_CIN 4053_E 2 99 005A4053000 "CASHOUT RM2: S53 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal."
005A_CIN 4054_E 2 99 005A4054000 "CASHOUT RM2: S54 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal."
005A_CIN 4055_E 2 99 005A4055000 "CASHOUT RM2: S55 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal."
005A_CIN 405A_E 2 99 005A405A000 "CASHOUT RM2: FL1 returned to opposite position, but S51 shielded."
00000000000
005A_CIN 405B_E 2 99 005A405B000 "CASHOUT RM2: FL2 returned to home position, but S50 shielded."
00000000000
005A_CIN 405C_E 2 99 005A405C000 "CASHOUT RM2: FL1 returned to home position, but S54 shielded."
00000000000
005A_CIN 405D_E 2 99 005A405D000 "CASHOUT RM2: FL10 returned to home position, but S55 shielded."
00000000000
005A_CIN 405E_E 2 99 005A405E000 "CASHOUT RM2: FL10 returned to opposite position, but S54 shielded."
00000000000
005A_CIN 4060_E 2 99 005A4060000 "CASHOUT RM2: S60 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal."
005A_CIN 4065_E 2 99 005A4065000 "CASHOUT RM2: S65 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal."
005A_CIN 4066_E 2 99 005A4066000 "CASHOUT RM2: S66 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal."
005A_CIN 4067_E 2 99 005A4067000 "CASHOUT RM2: S67 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal."
005A_CIN 4068_E 2 99 005A4068000 "CASHOUT RM2: S68 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal."

136 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A_CIN 4070_E 2 99 005A4070000 "CASHOUT RM2: S70 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal."
005A_CIN 4071_E 2 99 005A4071000 "CASHOUT RM2: S71 shielded at transportation: it must not be shielded -
00000000000 media may be remained or Sensor is abnormal. *Detected by tray controller"
005A_CIN 4072_E 2 99 005A4072000 "CASHOUT RM2: S72 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal. *Detected by tray controller"
005A_CIN 4073_E 2 99 005A4073000 "CASHOUT RM2: S73 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal. *Detected by tray controller"
005A_CIN 4074_E 2 99 005A4074000 "CASHOUT RM2: S74 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal. *Detected by tray controller"
005A_CIN 4075_E 2 99 005A4075000 "CASHOUT RM2: S75 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal. *Detected by tray controller"
005A_CIN 4076_E 2 99 005A4076000 "CASHOUT RM2: S76 unexpected shielded."
00000000000
005A_CIN 4077_E 2 99 005A4077000 "CASHOUT RM2: S77 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal. *Detected by tray controller"
005A_CIN 4078_E 2 99 005A4078000 "CASHOUT RM2: S78 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal. *Detected by tray controller "
005A_CIN 4079_E 2 99 005A4079000 "CASHOUT RM2: S79 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal. *Detected by tray controller "
005A_CIN 407B_E 2 99 005A407B000 "CASHOUT RM2: FL4 returned to opposite position, but S70 shielded."
00000000000
005A_CIN 4080_E 2 99 005A4080000 "CASHOUT RM2: SY1 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal. *Detected by tray controller"
005A_CIN 4081_E 2 99 005A4081000 "CASHOUT RM2: SY0 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal. *Detected by tray controller "
005A_CIN 408B_E 2 99 005A408B000 "CASHOUT RM2: FL11 returned to opposite position, but S70 shielded."
00000000000
005A_CIN 5004_E 2 99 005A5004000 "CASHOUT RM2: Note remained in outlet S2C shielded."
00000000000
005A_CIN 5005_E 2 99 005A5005000 "CASHOUT RM2: Note remained in outlet S1A shielded."
00000000000
005A_CIN 5006_E 2 99 005A5006000 "CASHOUT RM2: Note remained in outlet S2D shielded."
00000000000
005A_CIN 500C_E 2 99 005A500C000 "CASHOUT RM2: Note remained in outlet S2C shielded."
00000000000
005A_CIN 5010_E 2 99 005A5010000 "CASHOUT RM2: S10 shielded "
00000000000
005A_CIN 5012_E 2 99 005A5012000 "CASHOUT RM2: S12 shielded "
00000000000
005A_CIN 5014_E 2 99 005A5014000 "CASHOUT RM2: S14 shielded"
00000000000
005A_CIN 5015_E 2 99 005A5015000 "CASHOUT RM2: S15 shielded"
00000000000
005A_CIN 5016_E 2 99 005A5016000 "CASHOUT RM2: S16 shielded "
00000000000
005A_CIN 5018_E 2 99 005A5018000 "CASHOUT RM2: S18 shielded "
00000000000
005A_CIN 501C_E 2 99 005A501C000 "CASHOUT RM2: One of S10 - S14 shielded before transportation."
00000000000
005A_CIN 501D_E 2 99 005A501D000 "CASHOUT RM2: Wrinkled note remained in outlet."
00000000000
005A_CIN 501E_E 2 99 005A501E000 "CASHOUT RM2: One of S10 - S15 shielded."
00000000000
005A_CIN 501F_E 2 99 005A501F000 "CASHOUT RM2: Bucket or pressure plate not set at position of insertion at
00000000000 status sense (idling sense) or sense of insertion/taking-out."
005A_CIN 5023_E 2 99 005A5023000 "CASHOUT RM2: S23 shielded "
00000000000
005A_CIN 5028_E 2 99 005A5028000 "CASHOUT RM2: SW18 lighted shutter has not closed."
00000000000
005A_CIN 5029_E 2 99 005A5029000 "CASHOUT RM2: SW19 shielded shutter has not closed."
00000000000
005A_CIN 502A_E 2 99 005A502A000 "CASHOUT RM2: SW17 shielded shutter has not closed."
00000000000
005A_CIN 502B_E 2 99 005A502B000 "CASHOUT RM2: S2B shielded "
00000000000
005A_CIN 5033_E 2 99 005A5033000 "CASHOUT RM2: S33 shielded"
00000000000
005A_CIN 5034_E 2 99 005A5034000 "CASHOUT RM2: S34 shielded"
00000000000

U25604-J-Z745-1-7600 May 2011 137

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A_CIN 5035_E 2 99 005A5035000 "CASHOUT RM2: S35 Shielded"

00000000000
005A_CIN 5038_E 2 99 005A5038000 "CASHOUT RM2: Notes remained in temporary stack Unit before transpor-
00000000000 tation. One of S30 - S32"
005A_CIN 503A_E 2 99 005A503A000 "CASHOUT RM2: Notes can not be collected, because some part of notes are
00000000000 already out of temporary stack unit."
005A_CIN 503E_E 2 99 005A503E000 "CASHOUT RM2: One of S30 - S32 shielded"
00000000000
005A_CIN 5040_E 2 99 005A5040000 "CASHOUT RM2: S40 shielded"
00000000000
005A_CIN 5044_E 2 99 005A5044000 "CASHOUT RM2: S44 shielded "
00000000000
005A_CIN 5045_E 2 99 005A5045000 "CASHOUT RM2: S45 shielded "
00000000000
005A_CIN 5046_E 2 99 005A5046000 "CASHOUT RM2: S46 shielded"
00000000000
005A_CIN 5048_E 2 99 005A5048000 "CASHOUT RM2: Returning Stack Unit tilted SW48 lighted."
00000000000
005A_CIN 5049_E 2 99 005A5049000 "CASHOUT RM2: SW49 lighted"
00000000000
005A_CIN 504A_E 2 99 005A504A000 "CASHOUT RM2: S49 shielded"
00000000000
005A_CIN 504C_E 2 99 005A504C000 "CASHOUT RM2: S4C shielded"
00000000000
005A_CIN 504E_E 2 99 005A504E000 "CASHOUT RM2: One of S1B,S1D,S1F,S2A shielded."
00000000000
005A_CIN 5050_E 2 99 005A5050000 "CASHOUT RM2: S50 shielded "
00000000000
005A_CIN 5051_E 2 99 005A5051000 "CASHOUT RM2: S51 shielded "
00000000000
005A_CIN 5052_E 2 99 005A5052000 "CASHOUT RM2: S52 shielded "
00000000000
005A_CIN 5053_E 2 99 005A5053000 "CASHOUT RM2: S53 shielded"
00000000000
005A_CIN 5054_E 2 99 005A5054000 "CASHOUT RM2: S54 shielded "
00000000000
005A_CIN 5055_E 2 99 005A5055000 "CASHOUT RM2: S55 shielded "
00000000000
005A_CIN 5056_E 2 99 005A5056000 "CASHOUT RM2: S56 shielded "
00000000000
005A_CIN 5058_E 2 99 005A5058000 "CASHOUT RM2: SW58 lighted"
00000000000
005A_CIN 5059_E 2 99 005A5059000 "CASHOUT RM2: SW59 shielded"
00000000000
005A_CIN 505C_E 2 99 005A505C000 "CASHOUT RM2: SW5C shielded"
00000000000
005A_CIN 505F_E 2 99 005A505F000 "CASHOUT RM2: Signal of PLSW (safety switch) between head unit and safe
00000000000 unit might be cut."
005A_CIN 5060_E 2 99 005A5060000 "CASHOUT RM2: S60 shielded "
00000000000
005A_CIN 5065_E 2 99 005A5065000 "CASHOUT RM2: S65 shielded "
00000000000
005A_CIN 5066_E 2 99 005A5066000 "CASHOUT RM2: S66 shielded "
00000000000
005A_CIN 5067_E 2 99 005A5067000 "CASHOUT RM2: S67 shielded "
00000000000
005A_CIN 5068_E 2 99 005A5068000 "CASHOUT RM2: S68 shielded "
00000000000
005A_CIN 506F_E 2 99 005A506F000 "CASHOUT RM2: Pass(F) tilted (SW49 lighted) "
00000000000
005A_CIN 5070_E 2 99 005A5070000 "CASHOUT RM2: S70 shielded "
00000000000
005A_CIN 5071_E 2 99 005A5071000 "CASHOUT RM2: S71 shielded "
00000000000
005A_CIN 5072_E 2 99 005A5072000 "CASHOUT RM2: S72 shielded "
00000000000
005A_CIN 5073_E 2 99 005A5073000 "CASHOUT RM2: S73 shielded."
00000000000
005A_CIN 5074_E 2 99 005A5074000 "CASHOUT RM2: S74 shielded "
00000000000

138 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A_CIN 5075_E 2 99 005A5075000 "CASHOUT RM2: S75 shielded "

00000000000
005A_CIN 5076_E 2 99 005A5076000 "CASHOUT RM2: S76 shielded "
00000000000
005A_CIN 5077_E 2 99 005A5077000 "CASHOUT RM2: S77 shielded "
00000000000
005A_CIN 5078_E 2 99 005A5078000 "CASHOUT RM2: S78 shielded "
00000000000
005A_CIN 5079_E 2 99 005A5079000 "CASHOUT RM2: S79 shielded "
00000000000
005A_CIN 5080_E 2 99 005A5080000 "CASHOUT RM2: SY0 shielded "
00000000000
005A_CIN 5081_E 2 99 005A5081000 "CASHOUT RM2: SY1 shielded "
00000000000
005A_CIN 5082_E 2 99 005A5082000 "CASHOUT RM2: SY2 shielded "
00000000000
005A_CIN 508F_E 2 99 005A508F000 "CASHOUT RM2: Cassette not installed or IrDA abnormal."
00000000000
005A_CIN 5090_E 2 99 005A5090000 "CASHOUT RM2: Retract Cassette not installed."
00000000000
005A_CIN 509A_E 2 99 005A509A000 "CASHOUT RM2: SW9A lighted "
00000000000
005A_CIN 509B_E 2 99 005A509B000 "CASHOUT RM2: SW9B lighted "
00000000000
005A_CIN 509C_E 2 99 005A509C000 "CASHOUT RM2: SW9C lighted "
00000000000
005A_CIN 50A0_E 2 99 005A50A0000 "CASHOUT RM2: Both SA0 and SA1 shielded."
00000000000
005A_CIN 50AA_E 2 99 005A50AA000 "CASHOUT RM2: Media may be remained in cassette A or sensor is abnormal.
00000000000 *Detected by tray controller"
005A_CIN 50AC_E 2 99 005A50AC000 "CASHOUT RM2: Media may be remained in cassette A or sensor is abnormal.
00000000000 *Detected by tray controller"
005A_CIN 50AE_E 2 99 005A50AE000 "CASHOUT RM2: If cassette is empty, SA4 or SWAE may be abnormal."
00000000000
005A_CIN 50B0_E 2 99 005A50B0000 "CASHOUT RM2: Both SB0 and SB1 shielded "
00000000000
005A_CIN 50BA_E 2 99 005A50BA000 "CASHOUT RM2: Media may be remained in cassette B or sensor is abnormal.
00000000000 *Detected by tray controller"
005A_CIN 50BC_E 2 99 005A50BC000 "CASHOUT RM2: Media may be remained in cassette B or sensor is abnormal.
00000000000 *Detected by tray controller"
005A_CIN 50BE_E 2 99 005A50BE000 "CASHOUT RM2: If cassette is empty, SB4 or SWBE may be abnormal."
00000000000
005A_CIN 50C0_E 2 99 005A50C0000 "CASHOUT RM2: Both SC0 and SC1 shielded."
00000000000
005A_CIN 50CA_E 2 99 005A50CA000 "CASHOUT RM2: Media may be remained in cassette C or sensor is abnormal.
00000000000 *Detected by tray controller"
005A_CIN 50CC_E 2 99 005A50CC000 "CASHOUT RM2: Media may be remained in cassette C or sensor is abnormal.
00000000000 *Detected by tray controller"
005A_CIN 50CE_E 2 99 005A50CE000 "CASHOUT RM2: If cassette is empty, SC4 or SWCE may be abnormal."
00000000000
005A_CIN 50D0_E 2 99 005A50D0000 "CASHOUT RM2: Both SD0 and SD1 shielded."
00000000000
005A_CIN 50DA_E 2 99 005A50DA000 "CASHOUT RM2: Media may be remained in cassette D or sensor is abnormal.
00000000000 *Detected by tray controller"
005A_CIN 50DC_E 2 99 005A50DC000 "CASHOUT RM2: Media may be left in place in cassette D or sensor SWDC is
00000000000 abnormal."
005A_CIN 50DE_E 2 99 005A50DE000 "CASHOUT RM2: If cassette is empty, SD4 or SWDE may be abnormal."
00000000000
005A_CIN 50E0_E 2 99 005A50E0000 "CASHOUT RM2: SE0 shielded "
00000000000
005A_CIN 50EA_E 2 99 005A50EA000 "CASHOUT RM2: Media may be remained in reject cassette or sensor is
00000000000 abnormal. *Detected by tray controller"
005A_CIN 50EC_E 2 99 005A50EC000 "CASHOUT RM2: Media may be remained in reject cassette or sensor is
00000000000 abnormal. *Detected by tray controller"
005A_CIN 50F1_E 2 99 005A50F1000 "CASHOUT RM2: SWAE lighted"
00000000000
005A_CIN 50F2_E 2 99 005A50F2000 "CASHOUT RM2: SWBE lighted"
00000000000
005A_CIN 50F3_E 2 99 005A50F3000 "CASHOUT RM2: SWCE lighted"
00000000000

U25604-J-Z745-1-7600 May 2011 139

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A_CIN 50F4_E 2 99 005A50F4000 "CASHOUT RM2: SWDE lighted"

00000000000
005A_CIN 50FD_E 2 99 005A50FD000 "CASHOUT RM2: SY0 shielded. Jam in front of reject cassette."
00000000000
005A_CIN 50FE_E 2 99 005A50FE000 "CASHOUT RM2: SY1 shielded "
00000000000
005A_CIN 50FF_E 2 99 005A50FF000 "CASHOUT RM2: A command was received while the indicator was ON so that
00000000000 the tray can be pulled out, or while accessing the Tray Sensor SW9E, reading
the cassette's"
005A_CIN 6003_E 2 99 005A6003000 "CASHOUT RM2: S14 not lighted at lighting/shielding for sensor level during
00000000000 automatic adjustment."
005A_CIN 6004_E 2 99 005A6004000 "CASHOUT RM2: S15 not lighted at lighting/shielding for sensor level during
00000000000 automatic adjustment."
005A_CIN 6007_E 2 99 005A6007000 "CASHOUT RM2: S1F not lighted at lighting/shielding for sensor level during
00000000000 automatic adjustment."
005A_CIN 6008_E 2 99 005A6008000 "CASHOUT RM2: S2A not lighted at lighting/shielding for sensor level during
00000000000 automatic adjustment."
005A_CIN 6009_E 2 99 005A6009000 "CASHOUT RM2: S2C not lighted at lighting/shielding for sensor level during
00000000000 automatic adjustment."
005A_CIN 600A_E 2 99 005A600A000 "CASHOUT RM2: S2D not lighted at lighting/shielding for sensor level during
00000000000 automatic adjustment."
005A_CIN 600B_E 2 99 005A600B000 "CASHOUT RM2: S2E not lighted at lighting/shielding for sensor level during
00000000000 automatic adjustment."
005A_CIN 6020_E 2 99 005A6020000 "CASHOUT RM2: FRU device data of cassette A is abnormal."
00000000000
005A_CIN 6021_E 2 99 005A6021000 "CASHOUT RM2: FRU device data of cassette B is abnormal."
00000000000
005A_CIN 6022_E 2 99 005A6022000 "CASHOUT RM2: FRU device data of cassette C is abnormal."
00000000000
005A_CIN 6023_E 2 99 005A6023000 "CASHOUT RM2: FRU device data of cassette D is abnormal."
00000000000
005A_CIN 6024_E 2 99 005A6024000 "CASHOUT RM2: FRU device data of rejection unit is abnormal."
00000000000
005A_CIN 6026_E 2 99 005A6026000 "CASHOUT RM2: Automatic adjustment for one of S10 - S16 not completed -
00000000000 detected at Power ON."
005A_CIN 6027_E 2 99 005A6027000 "CASHOUT RM2: Automatic adjustment for DM11 not completed - detected at
00000000000 Power ON."
005A_CIN 602A_E 2 99 005A602A000 "CASHOUT RM2: SUM check abnormal for FRU device. Mapping data
00000000000 abnormal or mapping not executed."
005A_CIN 602B_E 2 99 005A602B000 "CASHOUT RM2: SUM check abnormal for FRU device. Mapping data
00000000000 abnormal or mapping not executed."
005A_CIN 602C_E 2 99 005A602C000 "CASHOUT RM2: SUM check abnormal for FRU device. Mapping data
00000000000 abnormal or mapping not executed."
005A_CIN 602D_E 2 99 005A602D000 "CASHOUT RM2: SUM check abnormal for FRU device. Mapping data
00000000000 abnormal or mapping not executed."
005A_CIN 602E_E 2 99 005A602E000 "CASHOUT RM2: SUM check abnormal for FRU device. Mapping data
00000000000 abnormal or mapping not executed."
005A_CIN 602F_E 2 99 005A602F000 "CASHOUT RM2: Cassette ID or SUM of denomination information abnormal."
00000000000
005A_CIN 6030_E 2 99 005A6030000 "CASHOUT RM2: SW38 not shielded at rotation of PM30 - SW38 broken or
00000000000 PM30 abnormal."
005A_CIN 6031_E 2 99 005A6031000 "CASHOUT RM2: SW38 not lighted at rotation of PM30 - SW38 broken or
00000000000 PM30 abnormal."
005A_CIN 6032_E 2 99 005A6032000 "CASHOUT RM2:
00000000000 EBH_EXT_ESCROW_PM30_SPEED_NOT_COMPLETED"
005A_CIN 6033_E 2 99 005A6033000 "CASHOUT RM2: Speed of PM30 not completed slow down or fast up - case
00000000000 2."
005A_CIN 6037_E 2 99 005A6037000 "CASHOUT RM2: S30 not lighted at lighting/shielding for sensor level during
00000000000 automatic adjustment."
005A_CIN 6038_E 2 99 005A6038000 "CASHOUT RM2: S31 not lighted at lighting/shielding for sensor level during
00000000000 automatic adjustment."
005A_CIN 6039_E 2 99 005A6039000 "CASHOUT RM2: S32 not lighted at lighting/shielding for sensor level during
00000000000 automatic adjustment."
005A_CIN 603A_E 2 99 005A603A000 "CASHOUT RM2: DM32 not rotated at low-speed rotation or rotated too fast for
00000000000 predefined speed."
005A_CIN 603B_E 2 99 005A603B000 "CASHOUT RM2: DM32 not rotated for predefined speed."
00000000000
005A_CIN 603C_E 2 99 005A603C000 "CASHOUT RM2: DM32 not stopped by stop indication."
00000000000
005A_CIN 603D_E 2 99 005A603D000 "CASHOUT RM2: Automatic adjustment of DM32 executed, but speed too fast
00000000000 for predefined or adjustment invalid."

140 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A_CIN 603E_E 2 99 005A603E000 "CASHOUT RM2: Automatic adjustment of DM32 executed, but speed too slow
00000000000 for predefined or adjustment invalid."
005A_CIN 603F_E 2 99 005A603F000 "CASHOUT RM2: DM32 ON, but motor not rotated - DM32 locked."
00000000000
005A_CIN 604F_E 2 99 005A604F000 "CASHOUT RM2: DM40 ON, but Motor not rotated."
00000000000
005A_CIN 6060_E 2 99 005A6060000 "CASHOUT RM2: Timed-up before completion of speed-up/down for PM30."
00000000000
005A_CIN 6061_E 2 99 005A6061000 "CASHOUT RM2: S35 shielded after completion of dispensing."
00000000000
005A_CIN 6080_E 2 99 005A6080000 "CASHOUT RM2: SWEB and SWEC both ON, one of switches broken."
00000000000
005A_CIN 6081_E 2 99 005A6081000 "CASHOUT RM2: SWE9 and SWEA both not ON, but SWEA ON, one of
00000000000 switches broken."
005A_CIN 6082_E 2 99 005A6082000 "CASHOUT RM2: Pressure mechanism abnormal at reject cassette.
00000000000 PME1=ON, but SWEC=OFF."
005A_CIN 6083_E 2 99 005A6083000 "CASHOUT RM2: PME1 ON, but SWE9 still ON."
00000000000
005A_CIN 6084_E 2 99 005A6084000 "CASHOUT RM2: PME1 ON, but SWEB still ON."
00000000000
005A_CIN 6085_E 2 99 005A6085000 "CASHOUT RM2: EBH_EXT_CASSETTE_SWEC"
00000000000
005A_CIN 6086_E 2 99 005A6086000 "CASHOUT RM2: PME1 ON, and SWEC not ON, but SWE9 ON. *Detected by
00000000000 tray controller"
005A_CIN 6087_E 2 99 005A6087000 "CASHOUT RM2: DME2 ON, but not rotated."
00000000000
005A_CIN 6088_E 2 99 005A6088000 "CASHOUT RM2: Althougth it is full, SWEA did not turn OFF even one time"
00000000000
005A_CIN 6089_E 2 99 005A6089000 "CASHOUT RM2: PME1 time-out."
00000000000
005A_CIN 608A_E 2 99 005A608A000 "CASHOUT RM2: SE0 ON."
00000000000
005A_CIN 608B_E 2 99 005A608B000 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=ON SWEB
00000000000 OFF SWEA OFF SWE9 ON)."
005A_CIN 608C_E 2 99 005A608C000 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=OFF SWEB
00000000000 ON SWEA OFF SWE9 OFF)."
005A_CIN 6090_E 2 99 005A6090000 "CASHOUT RM2: SUM Check abnormal for FRU Device. Mapping data
00000000000 abnormal or mapping not executed."
005A_CIN 6091_E 2 99 005A6091000 "CASHOUT RM2: Data written into FRU Device of Base Unit, but Data not
00000000000 same after Read "
005A_CIN 6092_E 2 99 005A6092000 "CASHOUT RM2: Data not written during predefined time - FRU broken or
00000000000 Wiring abnormal "
005A_CIN 6095_E 2 99 005A6095000 "CASHOUT RM2: PLSW OFF. One interlock switch open."
00000000000
005A_CIN 6096_E 2 99 005A6096000 "CASHOUT RM2: Pin installed for WDT. Jumper on mainboard installed for
00000000000 debugging, should be off."
005A_CIN 6097_E 2 99 005A6097000 "CASHOUT RM2: IOP not cut for tray controller. Problem in safe, power off for
00000000000 motors."
005A_CIN 6098_E 2 99 005A6098000 "CASHOUT RM2: IOP not cut for EBH Controller. Problem in mainunit, power
00000000000 off for motors."
005A_CIN 6099_E 2 99 005A6099000 "CASHOUT RM2: BID can not be initialized."
00000000000
005A_CIN 609A_E 2 99 005A609A000 "CASHOUT RM2: IOPTH is not OFF for tray controller. Tray contoller switches
00000000000 off mainboard due to a problem."
005A_CIN 609B_E 2 99 005A609B000 "CASHOUT RM2: IOPis not OFF for EBH controller. Mainboard switches off
00000000000 tray controller due to a problem."
005A_CIN 609C_E 2 99 005A609C000 "CASHOUT RM2: Metal detection can not be initialized, Change I/O module."
00000000000
005A_CIN 60A0_E 2 99 005A60A0000 "CASHOUT RM2: SWAB and SWAC both ON ,one of switches broken."
00000000000
005A_CIN 60A1_E 2 99 005A60A1000 "CASHOUT RM2: SWA9 and SWAA both not ON, but SWAA ON, one of
00000000000 switches broken."
005A_CIN 60A2_E 2 99 005A60A2000 "CASHOUT RM2: PMA1 ON, but SWAC not ON."
00000000000
005A_CIN 60A3_E 2 99 005A60A3000 "CASHOUT RM2: PMA1 ON, but SWA9 still ON. *Detected by tray controller "
00000000000
005A_CIN 60A4_E 2 99 005A60A4000 "CASHOUT RM2: PMA1 ON, but SWA9 still ON."
00000000000
005A_CIN 60A5_E 2 99 005A60A5000 "CASHOUT RM2: PMA1 ON, but SWAC not ON."
00000000000

U25604-J-Z745-1-7600 May 2011 141

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A_CIN 60A6_E 2 99 005A60A6000 "CASHOUT RM2: PMA1 ON, and SWAC not ON, but SWA9 ON."
00000000000
005A_CIN 60A7_E 2 99 005A60A7000 "CASHOUT RM2: DMA2 ON, but not rotated, Detected by tray controller, and
00000000000 detected by EBH controller during diagnostic test."
005A_CIN 60A8_E 2 99 005A60A8000 "CASHOUT RM2: Althougth it is full, SWAA did not turn OFF even one time."
00000000000
005A_CIN 60A9_E 2 99 005A60A9000 "CASHOUT RM2: PMB1 time-out, detected by tray controller."
00000000000
005A_CIN 60AA_E 2 99 005A60AA000 "CASHOUT RM2: SB0 ON. *Detected by tray controller"
00000000000
005A_CIN 60AB_E 2 99 005A60AB000 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=ON SWEB
00000000000 OFF SWEA OFF SWE9 ON)."
005A_CIN 60AC_E 2 99 005A60AC000 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=OFF SWEB
00000000000 ON SWEA OFF SWE9 OFF."
005A_CIN 60B0_E 2 99 005A60B0000 "CASHOUT RM2: SWBB and SWBC both ON."
00000000000
005A_CIN 60B1_E 2 99 005A60B1000 "CASHOUT RM2: SWB9 and SWBA both not ON, but SWBA ON, one of
00000000000 switches broken."
005A_CIN 60B2_E 2 99 005A60B2000 "CASHOUT RM2: PMB1 ON, but SWBC not ON."
00000000000
005A_CIN 60B3_E 2 99 005A60B3000 "CASHOUT RM2: PMB1 ON, but SWB9 still ON."
00000000000
005A_CIN 60B4_E 2 99 005A60B4000 "CASHOUT RM2: PMB1 ON, but SWBB still ON."
00000000000
005A_CIN 60B5_E 2 99 005A60B5000 "CASHOUT RM2: PMB1 ON, but SWBC not ON."
00000000000
005A_CIN 60B6_E 2 99 005A60B6000 "CASHOUT RM2: PMB1 ON, and SWBC not ON, but SWB9 ON."
00000000000
005A_CIN 60B7_E 2 99 005A60B7000 "CASHOUT RM2: DMB2 ON, but not rotated."
00000000000
005A_CIN 60B8_E 2 99 005A60B8000 "CASHOUT RM2: Althougth it is full, SWBB did not turn OFF even one time."
00000000000
005A_CIN 60B9_E 2 99 005A60B9000 "CASHOUT RM2: PMB1 time-out."
00000000000
005A_CIN 60BA_E 2 99 005A60BA000 "CASHOUT RM2: SB0 ON."
00000000000
005A_CIN 60BB_E 2 99 005A60BB000 "CASHOUT RM2: The state of the sensor is contradicted (SWEC=ON SWEB
00000000000 OFF SWEA OFF SWE9 ON)"
005A_CIN 60BC_E 2 99 005A60BC000 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=OFF SWEB
00000000000 ON SWEA OFF SWE9 OFF)"
005A_CIN 60C0_E 2 99 005A60C0000 "CASHOUT RM2: SWCB and SWCC both ON - one of switches broken."
00000000000
005A_CIN 60C1_E 2 99 005A60C1000 "CASHOUT RM2: SWC9 and SWCA both not ON, but SWCA ON, one of
00000000000 switches broken."
005A_CIN 60C2_E 2 99 005A60C2000 "CASHOUT RM2: PMC1 ON, but SWCC not ON."
00000000000
005A_CIN 60C3_E 2 99 005A60C3000 "CASHOUT RM2: PMC1 ON, but SWC9 still ON."
00000000000
005A_CIN 60C4_E 2 99 005A60C4000 "CASHOUT RM2: PMC1 ON, but SWCB still ON."
00000000000
005A_CIN 60C5_E 2 99 005A60C5000 "CASHOUT RM2: PMC1 ON, but SWCC not ON"
00000000000
005A_CIN 60C6_E 2 99 005A60C6000 "CASHOUT RM2: PMC1 ON, and SWCC not ON, but SWC9 ON."
00000000000
005A_CIN 60C7_E 2 99 005A60C7000 "CASHOUT RM2: DMC2 ON, but not rotated."
00000000000
005A_CIN 60C8_E 2 99 005A60C8000 "CASHOUT RM2: Althougth it is full, SWCC did not turn OFF even one time."
00000000000
005A_CIN 60C9_E 2 99 005A60C9000 "CASHOUT RM2: PMC1 time-out."
00000000000
005A_CIN 60CA_E 2 99 005A60CA000 "CASHOUT RM2: SC0 ON."
00000000000
005A_CIN 60CB_E 2 99 005A60CB000 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=ON SWEB
00000000000 OFF SWEA OFF SWE9 ON)."
005A_CIN 60CC_E 2 99 005A60CC000 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=OFF SWEB
00000000000 ON SWEA OFF SWE9 OFF)"
005A_CIN 60D0_E 2 99 005A60D0000 "CASHOUT RM2: SWDB and SWDC both ON, one of switches broken."
00000000000
005A_CIN 60D1_E 2 99 005A60D1000 "CASHOUT RM2: SWD9 and SWDA both not ON, but SWDA ON, one of
00000000000 switches broken."

142 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A_CIN 60D2_E 2 99 005A60D2000 "CASHOUT RM2: PMD1 ON, but SWDC not ON."
00000000000
005A_CIN 60D3_E 2 99 005A60D3000 "CASHOUT RM2: PMD1 ON, but SWD9 still ON."
00000000000
005A_CIN 60D4_E 2 99 005A60D4000 "CASHOUT RM2: PMD1 ON, but SWDB still ON."
00000000000
005A_CIN 60D5_E 2 99 005A60D5000 "CASHOUT RM2: PMD1 ON, but SWDC not ON."
00000000000
005A_CIN 60D6_E 2 99 005A60D6000 "CASHOUT RM2: PMD1 ON, and SWDC not ON, but SWC9 ON."
00000000000
005A_CIN 60D7_E 2 99 005A60D7000 "CASHOUT RM2: DMD2 ON, but not rotated."
00000000000
005A_CIN 60D8_E 2 99 005A60D8000 "CASHOUT RM2: Althougth it is full, SWDD did not turn OFF even one time."
00000000000
005A_CIN 60D9_E 2 99 005A60D9000 "CASHOUT RM2: PMD1 time-out."
00000000000
005A_CIN 60DA_E 2 99 005A60DA000 "CASHOUT RM2: SD0 ON."
00000000000
005A_CIN 60DB_E 2 99 005A60DB000 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=OFF SWEB
00000000000 ON SWEA OFF SWE9 OFF)."
005A_CIN 60DC_E 2 99 005A60DC000 "CASHOUT RM2: Inconsistent sensor status (SWD9=OFF SWDB=ON
00000000000 SWDC=OFF SWDA=OFF)."
005A_CIN 60E0_E 2 99 005A60E0000 "CASHOUT RM2: Media indication abnormal for cassette A."
00000000000
005A_CIN 60E1_E 2 99 005A60E1000 "CASHOUT RM2: Media indication abnormal for cassette B."
00000000000
005A_CIN 60E2_E 2 99 005A60E2000 "CASHOUT RM2: Media indication abnormal for cassette C."
00000000000
005A_CIN 60E3_E 2 99 005A60E3000 "CASHOUT RM2: Media indication abnormal for cassette D."
00000000000
005A_CIN 60E5_E 2 99 005A60E5000 "CASHOUT RM2: Media indication abnormal for reject cassette."
00000000000
005A_CIN 60E7_E 2 99 005A60E7000 "CASHOUT RM2: Adjustment value set out of range for store unit F."
00000000000
005A_CIN 60E8_E 2 99 005A60E8000 "CASHOUT RM2: Denomination information abnormal for reject cassette."
00000000000
005A_CIN 60E9_E 2 99 005A60E9000 "CASHOUT RM2: Rotation mechanism abnormal: at the reject cassette."
00000000000
005A_CIN 60ED_E 2 99 005A60ED000 "CASHOUT RM2: Media indication abnormal for collection cassette."
00000000000
005A_CIN 60F0_E 2 99 005A60F0000 "CASHOUT RM2: S35 not lighted at lighting/shielding for sensor level during
00000000000 automatic adjustment."
005A_CIN 60F1_E 2 99 005A60F1000 "CASHOUT RM2: Adjustment values not correct for outlet, temporary stack unit
00000000000 and returning stack unit."
005A_CIN 60F2_E 2 99 005A60F2000 "CASHOUT RM2: Adjustment values not set out of range for outlet, temporary
00000000000 stack unit and returning stack unit."
005A_CIN 60F7_E 2 99 005A60F7000 "CASHOUT RM2: Adjustment value set out of range for store unit A."
00000000000
005A_CIN 60F8_E 2 99 005A60F8000 "CASHOUT RM2: Adjustment value set out of range for store unit B."
00000000000
005A_CIN 60F9_E 2 99 005A60F9000 "CASHOUT RM2: Adjustment value set out of range for store unit C."
00000000000
005A_CIN 60FA_E 2 99 005A60FA000 "CASHOUT RM2: Adjustment value set out of range for store unit D."
00000000000
005A_CIN 60FB_E 2 99 005A60FB000 "CASHOUT RM2: Denomination information abnormal for Ccssette A."
00000000000
005A_CIN 60FC_E 2 99 005A60FC000 "CASHOUT RM2: Denomination information abnormal for cassette B."
00000000000
005A_CIN 60FD_E 2 99 005A60FD000 "CASHOUT RM2: Denomination information abnormal for cassette C."
00000000000
005A_CIN 60FE_E 2 99 005A60FE000 "CASHOUT RM2: Denomination information abnormal for cassette D."
00000000000
005A_CIN 60FF_E 2 99 005A60FF000 "CASHOUT RM2: Serial no. of production duplicated."
00000000000
005A_CIN 7010_E 2 99 005A7010000 "CASHOUT RM2: S10 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7012_E 2 99 005A7012000 "CASHOUT RM2: S12 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7014_E 2 99 005A7014000 "CASHOUT RM2: S14 abnormal. Power OFF, but sensor still lighted."
00000000000

U25604-J-Z745-1-7600 May 2011 143

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A_CIN 7015_E 2 99 005A7015000 "CASHOUT RM2: S15 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7016_E 2 99 005A7016000 "CASHOUT RM2: S16 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 701A_E 2 99 005A701A000 "CASHOUT RM2: S1A abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 701B_E 2 99 005A701B000 "CASHOUT RM2: S1B abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 701D_E 2 99 005A701D000 "CASHOUT RM2: S1D abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 701F_E 2 99 005A701F000 "CASHOUT RM2: S1F abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7023_E 2 99 005A7023000 "CASHOUT RM2: S23 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 702A_E 2 99 005A702A000 "CASHOUT RM2: S2A abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 702B_E 2 99 005A702B000 "CASHOUT RM2: S2B abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 702C_E 2 99 005A702C000 "CASHOUT RM2: S2C abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 702D_E 2 99 005A702D000 "CASHOUT RM2: S2D abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 702E_E 2 99 005A702E000 "CASHOUT RM2: S2E abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7030_E 2 99 005A7030000 "CASHOUT RM2: S30 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7031_E 2 99 005A7031000 "CASHOUT RM2: S31 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7032_E 2 99 005A7032000 "CASHOUT RM2: S32 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7033_E 2 99 005A7033000 "CASHOUT RM2: S33 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7034_E 2 99 005A7034000 "CASHOUT RM2: S34 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7035_E 2 99 005A7035000 "CASHOUT RM2: S35 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7044_E 2 99 005A7044000 "CASHOUT RM2: S44 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7045_E 2 99 005A7045000 "CASHOUT RM2: S45 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7050_E 2 99 005A7050000 "CASHOUT RM2: S50 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7051_E 2 99 005A7051000 "CASHOUT RM2: S51 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7052_E 2 99 005A7052000 "CASHOUT RM2: S52 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7053_E 2 99 005A7053000 "CASHOUT RM2: S53 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7054_E 2 99 005A7054000 "CASHOUT RM2: S54 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7055_E 2 99 005A7055000 "CASHOUT RM2: S55 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7056_E 2 99 005A7056000 "CASHOUT RM2: S56 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7060_E 2 99 005A7060000 "CASHOUT RM2: S60 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7065_E 2 99 005A7065000 "CASHOUT RM2: S65 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7066_E 2 99 005A7066000 "CASHOUT RM2: S66 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7067_E 2 99 005A7067000 "CASHOUT RM2: S67 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7068_E 2 99 005A7068000 "CASHOUT RM2: S68 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7070_E 2 99 005A7070000 "CASHOUT RM2: S70 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7071_E 2 99 005A7071000 "CASHOUT RM2: S71 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7072_E 2 99 005A7072000 "CASHOUT RM2: S72 abnormal. Power OFF, but sensor still lighted."
00000000000

144 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A_CIN 7073_E 2 99 005A7073000 "CASHOUT RM2: S73 abnormal. Power OFF, but sensor still."
00000000000
005A_CIN 7074_E 2 99 005A7074000 "CASHOUT RM2: S74 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7075_E 2 99 005A7075000 "CASHOUT RM2: S75 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7076_E 2 99 005A7076000 "CASHOUT RM2: S76 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7077_E 2 99 005A7077000 "CASHOUT RM2: S77 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7078_E 2 99 005A7078000 "CASHOUT RM2: S78 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7079_E 2 99 005A7079000 "CASHOUT RM2: S79 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7080_E 2 99 005A7080000 "CASHOUT RM2: S80 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7081_E 2 99 005A7081000 "CASHOUT RM2: S81 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 7082_E 2 99 005A7082000 "CASHOUT RM2: S82 abnormal. Power OFF, but sensor still lighted."
00000000000
005A_CIN 8010_E 2 99 005A8010000 "CASHOUT RM2: No-dispensing, foreign material, skew-dispensing,
00000000000 dispensing of some part of note or locking is detected 5 times by a command
and finally no-dispensing,"
005A_CIN 8012_E 2 99 005A8012000 "CASHOUT RM2: More than 2 check sheets dispensed at transportation way.
00000000000 Check or chained-dispensing, together-dispensing or half-folded dispensing
detected."
005A_CIN 8013_E 2 99 005A8013000 "CASHOUT RM2: No-dispensing, foreign material, skew-dispensing,
00000000000 dispensing of some part of note or locking is detected 5 times by a command
and finally foreign material"
005A_CIN 8014_E 2 99 005A8014000 "CASHOUT RM2: No-dispensing, foreign material, skew-dispensing,
00000000000 dispensing of some part of note or locking is detected 5 times by a command
and finally dispensing is"
005A_CIN 8015_E 2 99 005A8015000 "CASHOUT RM2: No-dispensing, foreign material, skew-dispensing,
00000000000 dispensing of some part of note or locking is detected 5 times by a command
and finally locking detected"
005A_CIN 8025_E 2 99 005A8025000 "CASHOUT RM2: Many BID other error."
00000000000
005A_CIN 8026_E 2 99 005A8026000 "CASHOUT RM2: Many BID identification impossible error. BEB $040 - 42 "
00000000000
005A_CIN 8030_E 2 99 005A8030000 "CASHOUT RM2: Transport locked, note locking is detected 5 times by a
00000000000 command."
005A_CIN 8031_E 2 99 005A8031000 "CASHOUT RM2: Transport locked, note locking is detected 5 times by a
00000000000 command."
005A_CIN 8090_E 2 99 005A8090000 "CASHOUT RM2: Running out of notes or picking no notes."
00000000000
005A_CIN 80A0_E 2 99 005A80A0000 "CASHOUT RM2: Picking error retries exceeded in the cassette."
00000000000
005A_CIN 80A5_E 2 99 005A80A5000 "CASHOUT RM2: Picking error reties exceeded in cassette A, picking was
00000000000 locked."
005A_CIN 80A6_E 2 99 005A80A6000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette A."
005A_CIN 80A7_E 2 99 005A80A7000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette A."
005A_CIN 80A8_E 2 99 005A80A8000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette A."
005A_CIN 80A9_E 2 99 005A80A9000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette A."
005A_CIN 80AA_E 2 99 005A80AA000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette A."
005A_CIN 80AB_E 2 99 005A80AB000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette A."
005A_CIN 80AC_E 2 99 005A80AC000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette A."
005A_CIN 80AD_E 2 99 005A80AD000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette A."
005A_CIN 80B0_E 2 99 005A80B0000 "CASHOUT RM2: Picking error retries, Exceeded in the cassette B."
00000000000
005A_CIN 80B5_E 2 99 005A80B5000 "CASHOUT RM2: Picking error reties, Exceeded in the cassette B, picking was
00000000000 locked."
005A_CIN 80B6_E 2 99 005A80B6000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette B."

U25604-J-Z745-1-7600 May 2011 145

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A_CIN 80B7_E 2 99 005A80B7000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette B."
005A_CIN 80B8_E 2 99 005A80B8000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette B."
005A_CIN 80B9_E 2 99 005A80B9000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette A."
005A_CIN 80BA_E 2 99 005A80BA000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette A."
005A_CIN 80BB_E 2 99 005A80BB000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette B."
005A_CIN 80BC_E 2 99 005A80BC000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette B."
005A_CIN 80BD_E 2 99 005A80BD000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette B."
005A_CIN 80C0_E 2 99 005A80C0000 "CASHOUT RM2: Picking error retries exceeded in the cassette C."
00000000000
005A_CIN 80C5_E 2 99 005A80C5000 "CASHOUT RM2: Picking error reties exceed in the cassette C, picking
00000000000 locked."
005A_CIN 80C6_E 2 99 005A80C6000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette C."
005A_CIN 80C7_E 2 99 005A80C7000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette C."
005A_CIN 80C8_E 2 99 005A80C8000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette C."
005A_CIN 80C9_E 2 99 005A80C9000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette C."
005A_CIN 80CA_E 2 99 005A80CA000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette C."
005A_CIN 80CB_E 2 99 005A80CB000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette C."
005A_CIN 80CC_E 2 99 005A80CC000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette C."
005A_CIN 80CD_E 2 99 005A80CD000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette C."
005A_CIN 80D0_E 2 99 005A80D0000 "CASHOUT RM2: Picking error retries. Exceeded in the cassette D."
00000000000
005A_CIN 80D5_E 2 99 005A80D5000 "CASHOUT RM2: Picking error retries, exceeded in the cassette D, picking
00000000000 was locked."
005A_CIN 80D6_E 2 99 005A80D6000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette D."
005A_CIN 80D7_E 2 99 005A80D7000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette D."
005A_CIN 80D8_E 2 99 005A80D8000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette D."
005A_CIN 80D9_E 2 99 005A80D9000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette D."
005A_CIN 80DA_E 2 99 005A80DA000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette D."
005A_CIN 80DB_E 2 99 005A80DB000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette D."
005A_CIN 80DC_E 2 99 005A80DC000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette D"
005A_CIN 80DD_E 2 99 005A80DD000 "CASHOUT RM2: Rejection occurred frequently with notes that were picked
00000000000 out from the cassette D."
005A_CIN 9002_E 2 99 005A9002000 "CASHOUT RM2: Software error for pressure plate control at temporary stack
00000000000 unit. Trouble detected at pressure plate control, but corresponding MTC
undefined."
005A_CIN 9003_E 2 99 005A9003000 "CASHOUT RM2: Software error for outlet control. Action indication of outlet
00000000000 undefined."
005A_CIN 9004_E 2 99 005A9004000 "CASHOUT RM2: Software error for pressure plate control at temporary stack
00000000000 unit. Action indication of temporary stack unit undefined."
005A_CIN 9005_E 2 99 005A9005000 "CASHOUT RM2: Software error for gate lever control at outlet. Trouble
00000000000 detected at gate lever control, but corresponding MTC undefined."
005A_CIN 9006_E 2 99 005A9006000 "CASHOUT RM2: Software error for pressure plate control at returning stack
00000000000 unit. Action indication of returning stack unit undefined."
005A_CIN 9007_E 2 99 005A9007000 "CASHOUT RM2: Software error for pressure plate control at returning stack
00000000000 unit. Trouble detected at pressure plate control, but corresponding MTC
undefined."
005A_CIN 9008_E 2 99 005A9008000 "CASHOUT RM2: Software error for pressure plate control at collection
00000000000 cassette. Action indication of collection unit undefined."

146 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A_CIN 9009_E 2 99 005A9009000 "CASHOUT RM2: Software error for pressure plate control at collection
00000000000 cassette. Trouble detected at cassette control, but corresponding MTC
undefined."
005A_CIN 900D_E 2 99 005A900D000 "CASHOUT RM2: EBH software control error. Data of transportation status is
00000000000 unexpected at transportation for collection: outlet."
005A_CIN 900E_E 2 99 005A900E000 "CASHOUT RM2: EBH software control error. Data of transportation status is
00000000000 unexpected at transportation for storing."
005A_CIN 900F_E 2 99 005A900F000 "CASHOUT RM2: EBH software control error. Data of transportation status is
00000000000 unexpected at transportation for reset."
005A_CIN 9010_E 2 99 005A9010000 "CASHOUT RM2: EBH software control error. Time-over for completion of
00000000000 internal processing subsidiary task processing unit."
005A_CIN 9011_E 2 99 005A9011000 "CASHOUT RM2: EBH software control error. Time-over for completion of
00000000000 internal processing internal communication control unit."
005A_CIN 9012_E 2 99 005A9012000 "CASHOUT RM2: EBH software control error. Time-over for completion of
00000000000 internal processing EBH controller."
005A_CIN 9013_E 2 99 005A9013000 "CASHOUT RM2: EBH software control error. Time-over for completion of
00000000000 internal processing transportation control unit."
005A_CIN 9014_E 2 99 005A9014000 "CASHOUT RM2: EBH sSoftware control error. Time-over for completion of
00000000000 internal processing cassette controller."
005A_CIN 9015_E 2 99 005A9015000 "CASHOUT RM2: EBH software control error. Time-over for completion of
00000000000 internal processing outlet control unit."
005A_CIN 9018_E 2 99 005A9018000 "CASHOUT RM2: EBH software control error. Time-over for completion of
00000000000 internal processing temporary stack control unit."
005A_CIN 9019_E 2 99 005A9019000 "CASHOUT RM2: EBH software control error. Time-over for completion of
00000000000 internal processing main motor control unit."
005A_CIN 901A_E 2 99 005A901A000 "CASHOUT RM2: EBH software control error. Time-over for completion of
00000000000 internal processing cassette controller A."
005A_CIN 901B_E 2 99 005A901B000 "CASHOUT RM2: EBH software control error. Time-over for completion of
00000000000 internal processing cassette controller B."
005A_CIN 901C_E 2 99 005A901C000 "CASHOUT RM2: EBH software control error. Time-over for completion of
00000000000 internal processing cassette controller C."
005A_CIN 901D_E 2 99 005A901D000 "CASHOUT RM2: EBH software control error. Time-over for completion of
00000000000 internal processing cassette controller D."
005A_CIN 9022_E 2 99 005A9022000 "CASHOUT RM2: Denomination unmatched. Denomination for cassette A by
00000000000 data write and information of cassette not matched."
005A_CIN 9024_E 2 99 005A9024000 "CASHOUT RM2: EBH software control error. Time-over for completion of
00000000000 internal processing: retract cassette control unit."
005A_CIN 9026_E 2 99 005A9026000 "CASHOUT RM2: EBH software control error. Data of transportation status is
00000000000 unexpected at transportation for returning."
005A_CIN 9027_E 2 99 005A9027000 "CASHOUT RM2: EBH software control error. Trouble detected at suspension
00000000000 processing of internal communication task before transportation."
005A_CIN 9028_E 2 99 005A9028000 "CASHOUT RM2: EBH software control error. Trouble detected at start-up
00000000000 processing of internal communication task after transportation."
005A_CIN 902B_E 2 99 005A902B000 "CASHOUT RM2: EBH software control error. Data of transportation status is
00000000000 unexpected at transportation for deposit."
005A_CIN 902D_E 2 99 005A902D000 "CASHOUT RM2: EBH software control error. Data of transportation status is
00000000000 unexpected at transportation for dispense."
005A_CIN 902F_E 2 99 005A902F000 "CASHOUT RM2: Hardware error of EBH WDT-out for tray controller."
00000000000
005A_CIN 9030_E 2 99 005A9030000 "CASHOUT RM2: EBH software control error. Trouble detected internal
00000000000 communication."
005A_CIN 9031_E 2 99 005A9031000 "CASHOUT RM2: The type of safe pass that is read at Power ON does not
00000000000 correspond with the"
005A_CIN 9037_E 2 99 005A9037000 "CASHOUT RM2: EBH software control error. Trouble detected internal
00000000000 communication. Application error: erong denomination should be cashed in
cassette A. Sample:"
005A_CIN 9038_E 2 99 005A9038000 "CASHOUT RM2: Denomination unmatched. Denomination for cassette B by
00000000000 data write and information of cassette not matched."
005A_CIN 9039_E 2 99 005A9039000 "CASHOUT RM2: Denomination unmatched. Denomination for cassette C by
00000000000 data write and information of cassette not matched."
005A_CIN 903A_E 2 99 005A903A000 "CASHOUT RM2: Denomination unmatched. Denomination for cassette D by
00000000000 data write and information of cassette not matched."
005A_CIN 903B_E 2 99 005A903B000 "CASHOUT RM2: Hardware error of EBH test of WDT-out abnormal. Time-out
00000000000 communication mainbord -> tray controller."
005A_CIN 903C_E 2 99 005A903C000 "CASHOUT RM2: Hardware error of EBH. Whole RAM clearing abnormal."
00000000000
005A_CIN 903D_E 2 99 005A903D000 "CASHOUT RM2: EBH software control error. Received message abnormal at
00000000000 tray controller."
005A_CIN 9050_E 2 99 005A9050000 "CASHOUT RM2: EBH software control error or hardware error. Sensor power
00000000000 control error."
005A_CIN 9051_E 2 99 005A9051000 "CASHOUT RM2: Lane is setting up for stacking, but dispense cassette is
00000000000 installed."

U25604-J-Z745-1-7600 May 2011 147

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A_CIN 9052_E 2 99 005A9052000 "CASHOUT RM2: Denomination ID abnormal for cassette B. Lane is setting up
00000000000 for stacking."
005A_CIN 9053_E 2 99 005A9053000 "CASHOUT RM2: Denomination ID abnormal for cassette C. Lane is setting up
00000000000 for stacking, but dispense cassette is installed."
005A_CIN 9054_E 2 99 005A9054000 "CASHOUT RM2: Denomination ID abnormal for cassette D. Lane is setting up
00000000000 for stacking, but dispense cassette is installed."
005A_CIN 9057_E 2 99 005A9057000 "CASHOUT RM2: Time-over for completion of command."
00000000000
005A_CIN 905A_E 2 99 005A905A000 "CASHOUT RM2: Denomination ID not set or it maybe not read."
00000000000
005A_CIN 905B_E 2 99 005A905B000 "CASHOUT RM2: Denomination ID not set or it maybe not read."
00000000000
005A_CIN 905C_E 2 99 005A905C000 "CASHOUT RM2: Denomination ID not set or it maybe not read."
00000000000
005A_CIN 905D_E 2 99 005A905D000 "CASHOUT RM2: Denomination ID not set or it maybe not read."
00000000000
005A_CIN 9060_E 2 99 005A9060000 "CASHOUT RM2: EBH software control error. Command data of transportation
00000000000 handler abnormal: set of flapping test abnormal."
005A_CIN 9061_E 2 99 005A9061000 "CASHOUT RM2: The feeding lane is empty, detected by Handler."
00000000000
005A_CIN 9062_E 2 99 005A9062000 "CASHOUT RM2: Denomination ID abnormal for reject cassette. Denomination
00000000000 ID setting data is abnormal."
005A_CIN 9064_E 2 99 005A9064000 "CASHOUT RM2: EBH software control error. Time-out of waiting for echo
00000000000 check completion: echo check is requested to internal communication unit, but
no completion"
005A_CIN 9065_E 2 99 005A9065000 "CASHOUT RM2: EBH software control error. Time-out of waiting for echo
00000000000 check completion: error of echo check."
005A_CIN 9066_E 2 99 005A9066000 "CASHOUT RM2: Denomination ID setting data is abnormal. Data from BEB do
00000000000 match to cassette (wrong ID`s)."
005A_CIN 9067_E 2 99 005A9067000 "CASHOUT RM2: Denomination ID setting data is abnormal, data from BEB do
00000000000 match to cassette (wrong ID`s)."
005A_CIN 9068_E 2 99 005A9068000 "CASHOUT RM2: Denomination ID setting data is abnormal, data from BEB do
00000000000 match to cassette (wrong ID`s)."
005A_CIN 9069_E 2 99 005A9069000 "CASHOUT RM2: Denomination ID setting data is abnormal. Data from BEB do
00000000000 match to cassette (wrong ID`s)."
005A_CIN 906A_E 2 99 005A906A000 "CASHOUT RM2: FRU device data abnormal for cassette A. SUM check
00000000000 abnormal for denomination. *Detected by EBH controller "
005A_CIN 906B_E 2 99 005A906B000 "CASHOUT RM2: FRU device data abnormal for cassette B. SUM check
00000000000 abnormal for denomination. *Detected by EBH controller "
005A_CIN 906C_E 2 99 005A906C000 "CASHOUT RM2: FRU device data abnormal for cassette C. SUM check
00000000000 abnormal for denomination. *Detected by EBH controller "
005A_CIN 906D_E 2 99 005A906D000 "CASHOUT RM2: FRU device data abnormal for cassette D. SUM check
00000000000 abnormal for denomination. *Detected by EBH controller"
005A_CIN 906E_E 2 99 005A906E000 "CASHOUT RM2: FRU device data abnormal for reject cassette. SUM check
00000000000 abnormal for denomination."
005A_CIN 906F_E 2 99 005A906F000 "CASHOUT RM2: EBH software control error. Time-out of waiting for FRU
00000000000 device completion. No communication to cassette EEPROM."
005A_CIN 9070_E 2 99 005A9070000 "CASHOUT RM2: EBH software control error. Indication code of main motor
00000000000 control abnormal: action indicated during rotation - detected by motor handler."
005A_CIN 9071_E 2 99 005A9071000 "CASHOUT RM2: Control indicated, but not completed after 15 seconds -
00000000000 detected motor handler."
005A_CIN 9072_E 2 99 005A9072000 "CASHOUT RM2: Notes disappeared in outlet when they must be stayed.
00000000000 Empty in Ootlet, when dispensing handler is launched - detected transportation
handler."
005A_CIN 9073_E 2 99 005A9073000 "CASHOUT RM2: Notes disappeared in temporary stack unit when they must
00000000000 be stayed. Empty in temporary stack unit, when dispensing handler is launched
- detected"
005A_CIN 9074_E 2 99 005A9074000 "CASHOUT RM2: Time-over for cction of transportation handler. Action not
00000000000 completed after predefined time by handler."
005A_CIN 9075_E 2 99 005A9075000 "CASHOUT RM2: EBH software control error. Command data of transportation
00000000000 hander abnormal - ACT2 abnormal."
005A_CIN 9076_E 2 99 005A9076000 "CASHOUT RM2: EBH software control error. Command data of transportation
00000000000 hander abnormal - set of limitation number of notes for temporary stack unit
abnormal."
005A_CIN 9077_E 2 99 005A9077000 "CASHOUT RM2: EBH software control error. Command data of transportation
00000000000 hander abnormal - set of dispensing number of notes abnormal."
005A_CIN 9078_E 2 99 005A9078000 "CASHOUT RM2: EBH software control error. Relay monitoring area insuffi-
00000000000 cient: area not allocated to writing arrival time for relay sensor."
005A_CIN 9079_E 2 99 005A9079000 "CASHOUT RM2: EBH software control error. BMT insufficient: area not
00000000000 allocated during transportation - detected by transportation handler."
005A_CIN 907A_E 2 99 005A907A000 "CASHOUT RM2: EBH software control error. BRT insufficient: area not
00000000000 allocated during transportation - detected by transportation handler."

148 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A_CIN 907B_E 2 99 005A907B000 "CASHOUT RM2: EBH software control error. Memory data destroyed: data
00000000000 which transportation handler uses is unexpected - memory maybe broken."
005A_CIN 907C_E 2 99 005A907C000 "CASHOUT RM2: EBH software control error. Unhypothetical note detected at
00000000000 flapping: two or more than notes are waiting for flapping at same time."
005A_CIN 907D_E 2 99 005A907D000 "CASHOUT RM2: EBH software control error. Command data of transportation
00000000000 hander abnormal: set of acceptable media abnormal."
005A_CIN 907E_E 2 99 005A907E000 "CASHOUT RM2: EBH software control error. Command data of transportation
00000000000 hander abnormal: set of destination for denominations abnormal."
005A_CIN 9080_E 2 99 005A9080000 "CASHOUT RM2: EBH software control error. Transportation handlers dupli-
00000000000 cated launched: another transportation handler launched again during
execution"
005A_CIN 9081_E 2 99 005A9081000 "CASHOUT RM2: EBH software control error. Time-out for action of transpor-
00000000000 tation handler - execution of transportation handler not completed after
predefined time."
005A_CIN 9082_E 2 99 005A9082000 "CASHOUT RM2: EBH software control error. Recognition data of transpor-
00000000000 tation handler abnormal: denomination data not satisfied, but notes accepted."
005A_CIN 9083_E 2 99 005A9083000 "CASHOUT RM2: EBH software control error. Recognition data of transpor-
00000000000 tation handler abnormal: recognition is NG, but notes accepted."
005A_CIN 9084_E 2 99 005A9084000 "CASHOUT RM2: EBH software control error. Data of transportation handler
00000000000 abnormal: transportation handler receives dispensing from not-installed
cassette."
005A_CIN 9088_E 2 99 005A9088000 "CASHOUT RM2: EBH software control error. Memory broken: recognition
00000000000 response data BRT of transportation invalid."
005A_CIN 908C_E 2 99 005A908C000 "CASHOUT RM2: EBH software control error. Data of transportation handler
00000000000 abnormal: motor stop indicated during transportation - detected by transpor-
tation handler."
005A_CIN 90C1_E 2 99 005A90C1000 "CASHOUT RM2: EBH software control error. Memory data destroyed: data
00000000000 which transportation handler uses is unexpected - memory maybe broken."
005A_CIN 90C2_E 2 99 005A90C2000 "CASHOUT RM2: EBH software control error. BMT insufficient: area not
00000000000 allocated during transportation - detected by transportation handler."
005A_CIN 90C3_E 2 99 005A90C3000 "CASHOUT RM2: EBH software control error. BRT insufficient: area not
00000000000 allocated during transportation - detected by rransportation handler."
005A_CIN 90C4_E 2 99 005A90C4000 "CASHOUT RM2: EBH software control error. Relay monitoring area insuffi-
00000000000 cient: area not allocated to writing arrival time for relay sensor."
005A_CIN 90C5_E 2 99 005A90C5000 "CASHOUT RM2: EBH software control error. Unhypothetical note detected at
00000000000 flapping: two or more than notes are waiting for flapping at same time."
005A_CIN 90C6_E 2 99 005A90C6000 "CASHOUT RM2: EBH software control error. Memory data destroyed: BRT
00000000000 which transportation handler uses is unexpected - memory maybe broken."
005A_CIN 90C7_E 2 99 005A90C7000 "CASHOUT RM2: EBH software control error. Memory data destroyed at trans-
00000000000 portation handler. *Detected by tray controller "
005A_CIN 90C8_E 2 99 005A90C8000 "CASHOUT RM2: Control indicated, but not completed after 3 seconds in trans-
00000000000 portation handler."
005A_CIN 90C9_E 2 99 005A90C9000 "CASHOUT RM2: It tried IOP signal of tray to turn OFF, but it did not turn OFF.
00000000000 (Although the IOP signal is OFF, the motor run.)"
005A_CIN 90CA_E 2 99 005A90CA000 "CASHOUT RM2: The TG interruption processing stopped while conveying.
00000000000 TG line is abnormal."
005A_CIN 90CB_E 2 99 005A90CB000 "CASHOUT RM2: Tray software control error. Command error (message which
00000000000 tray controller receive from EBH controller is abnormal)."
005A_CIN 90CF_E 2 99 005A90CF000 "CASHOUT RM2: TG Line abnormal. Executing of command, interrupt signal
00000000000 of TG. Electrical noise on the wire."
005A_CIN 90D0_E 2 99 005A90D0000 "CASHOUT RM2: Error of sequence. EBH controller send signal of S51-ON in
00000000000 serial order. *Detected by tray controller "
005A_CIN 90D1_E 2 99 005A90D1000 "CASHOUT RM2: Error of sequence. EBH controller send signal of S51-OFF
00000000000 in serial order. *Detected by tray controller "
005A_CIN 90D2_E 2 99 005A90D2000 "CASHOUT RM2: Tray software control error. Time-over for completion of
00000000000 internal processing in pressure plate control at cassette A."
005A_CIN 90D3_E 2 99 005A90D3000 "CASHOUT RM2: Tray software control error. Time-over for completion of
00000000000 internal processing in pressure plate control at cassette B."
005A_CIN 90D4_E 2 99 005A90D4000 "CASHOUT RM2: Tray software control error. Time-over for completion of
00000000000 internal processing in pressure plate control at cassette C."
005A_CIN 90D5_E 2 99 005A90D5000 "CASHOUT RM2: Tray software control error. Time-over for completion of
00000000000 internal processing in pressure plate control at cassette D."
005A_CIN 90D6_E 2 99 005A90D6000 "CASHOUT RM2: Tray software internal command timing abnormal. Executing
00000000000 of pressure plate control at cassette A, send command again."
005A_CIN 90D7_E 2 99 005A90D7000 "CASHOUT RM2: Tray software internal command timing abnormal. Executing
00000000000 of pressure plate control at cassette B, send command again."
005A_CIN 90D8_E 2 99 005A90D8000 "CASHOUT RM2: Tray software internal command timing abnormal. Executing
00000000000 of pressure plate control at cassette C, send command again."
005A_CIN 90D9_E 2 99 005A90D9000 "CASHOUT RM2: Tray software internal command timing abnormal. Executing
00000000000 of pressure plate control at cassette D, send command again."
005A_CIN 90DA_E 2 99 005A90DA000 "CASHOUT RM2: Tray software control error time-over for completion of
00000000000 internal processing in pressure plate control at reject cassette."

U25604-J-Z745-1-7600 May 2011 149

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A_CIN 90DB_E 2 99 005A90DB000 "CASHOUT RM2: Tray software internal command timing abnormal. Executing
00000000000 of pressure plate control at reject cassette, send command again."
005A_CIN 90DD_E 2 99 005A90DD000 "CASHOUT RM2: It tried to read data from EEPROM device of Reject cassette,
00000000000 but there was no"
005A_CIN 90DE_E 2 99 005A90DE000 "CASHOUT RM2: It tried to write data to EEPROM Device of Reject cassette
00000000000 but there were no"
005A_CIN 90DF_E 2 99 005A90DF000 "CASHOUT RM2: It tried to write data to EEPROM Device of Reject cassette,
00000000000 but verify-error"
005A_CIN 90E0_E 2 99 005A90E0000 "CASHOUT RM2: IOP cut for EBH controller. *Detected by tray controller "
00000000000
005A_CIN 90E2_E 2 99 005A90E2000 "CASHOUT RM2: Tray software control error. Rejection unit controller
00000000000 appointed undefined sensor."
005A_CIN 90E3_E 2 99 005A90E3000 "CASHOUT RM2: The interrupt processing test was executed in synthetic
00000000000 mechanical test, but it failed. There was no interruption processing of S70-S79,
S80."
005A_CIN 90E4_E 2 99 005A90E4000 "CASHOUT RM2: It tried to read data from FRU device of cassette A, but there
00000000000 were no response. FRU device line is abnormal."
005A_CIN 90E5_E 2 99 005A90E5000 "CASHOUT RM2: It tried to read data from FRU device of cassette A, but there
00000000000 were no response. FRU device line is abnormal."
005A_CIN 90E6_E 2 99 005A90E6000 "CASHOUT RM2: It tried to write data to FRU device of cassette A, but verify-
00000000000 error was occurred. FRU device line is abnormal."
005A_CIN 90E7_E 2 99 005A90E7000 "CASHOUT RM2: It tried to read data from FRU device of cassette B, but there
00000000000 were no response. FRU device line is abnormal."
005A_CIN 90E8_E 2 99 005A90E8000 "CASHOUT RM2: It tried to read data from FRU device of cassette B, but there
00000000000 were no response. FRU device line is abnormal."
005A_CIN 90E9_E 2 99 005A90E9000 "CASHOUT RM2: It tried to write data to FRU device of cassette B, but verify-
00000000000 error was occurred FRU device line is abnormal."
005A_CIN 90EA_E 2 99 005A90EA000 "CASHOUT RM2: It tried to read data from FRU device of cassette C, but there
00000000000 were no response FRU device line is abnormal."
005A_CIN 90EB_E 2 99 005A90EB000 "CASHOUT RM2: It tried to read data from FRU device of cassette C, but there
00000000000 were no response FRU device line is abnormal."
005A_CIN 90EC_E 2 99 005A90EC000 "CASHOUT RM2: It tried to write data to FRU device of cassette C, but verify-
00000000000 error was occurred FRU device line is abnormal."
005A_CIN 90ED_E 2 99 005A90ED000 "CASHOUT RM2: It tried to read data from FRU device of cassette D, but there
00000000000 were no response FRU device line is abnormal."
005A_CIN 90EE_E 2 99 005A90EE000 "CASHOUT RM2: It tried to read data from FRU device of cassette D, but there
00000000000 were no response FRU device line is abnormal."
005A_CIN 90EF_E 2 99 005A90EF000 "CASHOUT RM2: It tried to write data to FRU device of cassette D, but verify-
00000000000 error was occurred FRU device line is abnormal."
005A_CIN A009_E 2 99 005AA009000 "CASHOUT RM2: Notes are disappeared in outlet. Notes must be remained in
00000000000 outlet by status from transportation control (after returning of notes from outlet)"
005A_CIN A00A_E 2 99 005AA00A000 "CASHOUT RM2: Notes are disappeared in outlet after initial reset is prepro-
00000000000 cessed, S10,S12,S14,S15 are not lighting."
005A_CIN A00D_E 2 99 005AA00D000 "CASHOUT RM2: Notes are disappeared in I/O module or notes are detected
00000000000 when they are not remained after transportation for returning reject notes to I/
O module."
005A_CIN A00E_E 2 99 005AA00E000 "CASHOUT RM2: Notes are disappeared in ESCROW unit or notes are
00000000000 detected when they are not remained."
005A_CIN A00F_E 2 99 005AA00F000 "CASHOUT RM2: Notes are disappeared in ESCROW unit or notes are
00000000000 detected when they are not remained."
005A_CIN A010_E 2 99 005AA010000 "CASHOUT RM2: Notes are disappeared in outlet. S10,S12,S14,S15 are not
00000000000 shielded when bucket is set at position of Dispensing - before deposit transpor-
tation."
005A_CIN A011_E 2 99 005AA011000 "CASHOUT RM2: Notes are detected when they are not remained in outlet.
00000000000 Either S1B,S1D,S1F,S2A is shielded when outlet is moved - before deposit
transportation."
005A_CIN A012_E 2 99 005AA012000 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected by
00000000000 mistake when they are not remained. Result of remaining check is changed
when bucket is moved"
005A_CIN A013_E 2 99 005AA013000 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when
00000000000 they are not remained"
005A_CIN A014_E 2 99 005AA014000 "CASHOUT RM2: Notes are disappeared in outlet after transportation for
00000000000 deposit S10, S12, S14, S15"
005A_CIN A016_E 2 99 005AA016000 "CASHOUT RM2: Notes are detected in outlet after processing identification by
00000000000 the create reference signature. Either S10, S12, S14, S15 is shielded."
005A_CIN A01C_E 2 99 005AA01C000 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when
00000000000 they are not remained after transportation for dispense, or the bucket position
is abnormal"
005A_CIN A01D_E 2 99 005AA01D000 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when
00000000000 they are not remained before transportation for dispense. S10, S12, S14, S15"

150 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A_CIN A01E_E 2 99 005AA01E000 "CASHOUT RM2: Notes are disappeared in rejected note ESCROW Unit or
00000000000 notes are detected when they are not remained in pressure plate moved for
returning reject notes"
005A_CIN A01F_E 2 99 005AA01F000 "CASHOUT RM2: Notes are disappeared in outlet when pressure plate moved
00000000000 at outlet after transportation for dispense. S10, S12, S14, S15"
005A_CIN A020_E 2 99 005AA020000 "CASHOUT RM2: The picking status error in the cassette A. After notes were
00000000000 feed with the status "empty"."
005A_CIN A021_E 2 99 005AA021000 "CASHOUT RM2: The picking status error in the cassette B. After notes were
00000000000 feed with the status "empty"."
005A_CIN A022_E 2 99 005AA022000 "CASHOUT RM2: The picking status error in the cassette C. After notes were
00000000000 feed with the status "empty."."
005A_CIN A023_E 2 99 005AA023000 "CASHOUT RM2: The picking status error in the cassette D. After notes were
00000000000 fed with the status "empty"."
005A_CIN A024_E 2 99 005AA024000 "CASHOUT RM2: Notes are disappeared in outlet. Accumulation of notes is
00000000000 reported by transportation control after returning transportation
005A_CIN A026_E 2 99 005AA026000 "CASHOUT RM2: Invalid number of dispensed notes."
00000000000
005A_CIN A027_E 2 99 005AA027000 "CASHOUT RM2: Notes are disappeared in outlet. Result of remaining check
00000000000 is changed when bucket is set at position of accumulation - before dispensing
transportation"
005A_CIN A028_E 2 99 005AA028000 "CASHOUT RM2: Notes are detected when they are not remained in outlet.
00000000000 One of S1B, 1D, 1F, S2A is shielded when outlet is set at position of transpor-
tation position"
005A_CIN A029_E 2 99 005AA029000 "CASHOUT RM2: Notes are disappeared in temporary stack unit."
00000000000
005A_CIN A02A_E 2 99 005AA02A000 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when
00000000000 they are not remained. Result of remaining check is changed before returning
retry"
005A_CIN A02B_E 2 99 005AA02B000 "CASHOUT RM2: Notes are disappeared in temporary stack unit or notes are
00000000000 detected when they are not remained."
005A_CIN A02C_E 2 99 005AA02C000 "CASHOUT RM2: Notes are disappeared in temporary stack unit or notes are
00000000000 detected when they are not remained."
005A_CIN A02D_E 2 99 005AA02D000 "CASHOUT RM2: Number of notes in temporary stack unit and number of
00000000000 returned notes are not same."
005A_CIN A02E_E 4 99 005AA02E000 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when
00000000000 they are not remained. Result of remaining check is changed when bBucket is
moved"
005A_CIN A030_E 2 99 005AA030000 "CASHOUT RM2: Notes are disappeared in temporary stack unit."
00000000000
005A_CIN A031_E 2 99 005AA031000 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when
00000000000 they are not remained. Result of remaining check is changed when bucket is
moved"
005A_CIN A033_E 2 99 005AA033000 "CASHOUT RM2: Notes are disappeared in temporary stack unit or notes are
00000000000 detected when they are not remained."
005A_CIN A034_E 2 99 005AA034000 "CASHOUT RM2: Notes are disappeared in temporary stack unit."
00000000000
005A_CIN A037_E 2 99 005AA037000 "CASHOUT RM2: Number of stacked notes in temporary stack unit and
00000000000 number of recognized notes are not same after storing transportation."
005A_CIN A038_E 2 99 005AA038000 "CASHOUT RM2: Number of recognized notes and number of stored notes are
00000000000 not same at storing."
005A_CIN A03D_E 2 99 005AA03D000 "CASHOUT RM2: Notes are not remained in outlet, but they are detected at
00000000000 synthetic transportation test."
005A_CIN A03E_E 2 99 005AA03E000 "CASHOUT RM2: Notes are not remained in temporary stack unit, but they are
00000000000 detected."
005A_CIN A03F_E 2 99 005AA03F000 "CASHOUT RM2: Notes are not remained in returning stack unit, but detected
00000000000 at synthetic transportation test."
005A_CIN A047_E 2 99 005AA047000 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when
00000000000 they are not remained."
005A_CIN A04A_E 2 99 005AA04A000 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when
00000000000 they are not remained."
005A_CIN A04B_E 2 99 005AA04B000 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when
00000000000 they are not remained."
005A_CIN A04C_E 2 99 005AA04C000 "CASHOUT RM2: There are abnormalities in a passage check."
00000000000
005A_CIN A04D_E 2 99 005AA04D000 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when
00000000000 they are not remained."
005A_CIN A04E_E 2 99 005AA04E000 "CASHOUT RM2: Notes are disappeared in outlet or are notes detected when
00000000000 they are not remained."
005A_CIN A04F_E 2 99 005AA04F000 "CASHOUT RM2: Notes are disappeared in temporary stack unit or notes are
00000000000 detected when they are not remained."
005A_CIN A050_E 2 99 005AA050000 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when
00000000000 they are not remained."

U25604-J-Z745-1-7600 May 2011 151

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A_CIN A054_E 2 99 005AA054000 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when
00000000000 they are not remained."
005A_CIN A055_E 2 99 005AA055000 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when
00000000000 they are not remained."
005A_CIN A056_E 2 99 005AA056000 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when
00000000000 they are not remained."
005A_CIN A05A_E 2 99 005AA05A000 "CASHOUT RM2: Notes are disappeared in temporary stack unit or notes are
00000000000 detected when they are not remained."
005A_CIN A060_E 2 99 005AA060000 "CASHOUT RM2: Rear D lane S60. Abnormal interruption S60 cannot be
00000000000 turned ON. S60 (cash-out transport from safe) is blocked but should be free."
005A_CIN A061_E 2 99 005AA061000 "CASHOUT RM2: Rear D lane S54. Abnormal interruption S54 cannot be
00000000000 turned ON. S54 (cash-in transport to safe) is blocked but should be free."
005A_CIN A062_E 2 99 005AA062000 "CASHOUT RM2: Abnormal interruption of S55. S55 cannot be turned ON."
00000000000
005A_CIN A06B_E 2 99 005AA06B000 "CASHOUT RM2: Count of BID and count of accumulation place at S54 are not
00000000000 same. Check is executed for each denomination."
005A_CIN A06C_E 2 99 005AA06C000 "CASHOUT RM2: There is/are rejects, but value counted at accumulation
00000000000 sensor S54 is 0. Note do not reach cash-in transport (S54)."
005A_CIN A06D_E 2 99 005AA06D000 "CASHOUT RM2: There is/are rejects, but number of interrupts at accumu-
00000000000 lation sensor S54 is 0. Note do not reach cash-in transport (S54)."
005A_CIN A06E_E 2 99 005AA06E000 "CASHOUT RM2: There are no rejects, but there is interrupt at accumulation
00000000000 sensor S54. Note do not reach cash-in transport (S54)."
005A_CIN A071_E 2 99 005AA071000 "CASHOUT RM2: Number of recognized notes by BID and number of calcu-
00000000000 lated notes are not same."
005A_CIN A072_E 2 99 005AA072000 "CASHOUT RM2: Number of stacked notes in temporary stack unit and count
00000000000 of S30 interrupts are not same."
005A_CIN A074_E 2 99 005AA074000 "CASHOUT RM2: Count of S22/S24/S25/S26 and count of S50 are not same."
00000000000
005A_CIN A075_E 2 99 005AA075000 "CASHOUT RM2: Number of stacked notes in temporary stack unit and count
00000000000 of FL2 are not same."
005A_CIN A07A_E 2 99 005AA07A000 "CASHOUT RM2: Rejection of notes is set in recognition response after trans-
00000000000 portation, but count of S46/47 is 0."
005A_CIN A07B_E 2 99 005AA07B000 "CASHOUT RM2: Rejection of notes is set in recognition response after trans-
00000000000 portation, but interrupt count of S46/47 is 0."
005A_CIN A07C_E 2 99 005AA07C000 "CASHOUT RM2: Rejection of notes is not set in recognition response after
00000000000 transportation, but interrupt of S46/47 is detected."
005A_CIN A07D_E 2 99 005AA07D000 "CASHOUT RM2: Calculation abnormal. Rejection of notes is not set in recog-
00000000000 nition response after transportation."
005A_CIN A07E_E 2 99 005AA07E000 "CASHOUT RM2: Calculation abnormal. Rejection of notes is set in recognition
00000000000 response after transportation."
005A_CIN A081_E 2 99 005AA081000 "CASHOUT RM2: Another note which was recognized is detected at Storing.
00000000000 Reader swapped ID after second feed."
005A_CIN A082_E 2 99 005AA082000 "CASHOUT RM2: Notes are disappeared in outlet. The note was not able to be
00000000000 detected in the transporting path."
005A_CIN A083_E 2 99 005AA083000 "CASHOUT RM2: Notes are disappeared in temporary stack unit. Notes are
00000000000 transported into temporary stack unit."
005A_CIN A084_E 2 99 005AA084000 "CASHOUT RM2: Number of note which indicated by EBH controller and count
00000000000 of tray controller are not same."
005A_CIN A085_E 2 99 005AA085000 "CASHOUT RM2: Number of reject note which indicated by EBH controller and
00000000000 count of tray controller are not same."
005A_CIN A092_E 2 99 005AA092000 "CASHOUT RM2: Calculation abnormal: number of dispense notes."
00000000000
005A_CIN A093_E 2 99 005AA093000 "CASHOUT RM2: Calculation abnormal: number of dispense notes."
00000000000
005A_CIN A094_E 2 99 005AA094000 "CASHOUT RM2: Number of accumulated notes in cassette A abnormal."
00000000000
005A_CIN A095_E 2 99 005AA095000 "CASHOUT RM2: Number of accumulated notes in cassette B abnormal."
00000000000
005A_CIN A096_E 2 99 005AA096000 "CASHOUT RM2: Number of accumulated notes in cassette C abnormal."
00000000000
005A_CIN A097_E 2 99 005AA097000 "CASHOUT RM2: Number of accumulated notes in cassette D abnormal."
00000000000
005A_CIN A09A_E 2 99 005AA09A000 "CASHOUT RM2: Different denomination picked from Cassette A. Wrong
00000000000 denomimation loaded to cassette A."
005A_CIN A09B_E 2 99 005AA09B000 "CASHOUT RM2: Different denomination picked from Cassette B. Wrong
00000000000 denomimation loaded to cassette B."
005A_CIN A09C_E 2 99 005AA09C000 "CASHOUT RM2: Different denomination picked from Cassette C. Wrong
00000000000 denomimation loaded to cassette C."
005A_CIN A09D_E 2 99 005AA09D000 "CASHOUT RM2: Different denomination picked from cassette D. Wrong
00000000000 denomimation loaded to cassette D."

152 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A_CIN A0A1_E 2 99 005AA0A1000 "CASHOUT RM2: Value count at S65, S66, S67 > value count at S2B "
00000000000
005A_CIN A0A2_E 2 99 005AA0A2000 "CASHOUT RM2: Value count at S65, S66, S67 > value count at S2B "
00000000000
005A_CIN A0B7_E 2 99 005AA0B7000 "CASHOUT RM2: Note is transported into entrance of tray, when it is not
00000000000 destined to returning entrance of tray."
005A_CIN A0B8_E 2 99 005AA0B8000 "CASHOUT RM2: Note is transported into outlet of tray, when it is not destined
00000000000 to returning outlet of tray."
005A_CIN A0B9_E 2 99 005AA0B9000 "CASHOUT RM2: Note is transported into outlet unit, when it is not destined to
00000000000 outlet unit."
005A_CIN A0BA_E 2 99 005AA0BA000 "CASHOUT RM2: Note is transported into temporary stack unit, when it is not
00000000000 destined to temporary stack unit."
005A_CIN A0BB_E 2 99 005AA0BB000 "CASHOUT RM2: Note is transported into L2 box, when it is not destined to L2
00000000000 box."
005A_CIN A0C1_E 2 99 005AA0C1000 "CASHOUT RM2: Note is transported into cassette A, when it is not destined
00000000000 to there. *Detected by tray controller"
005A_CIN A0C2_E 2 99 005AA0C2000 "CASHOUT RM2: Note is transported into cassette B, when it is not destined
00000000000 to there. *Detected by tray controller"
005A_CIN A0C3_E 2 99 005AA0C3000 "CASHOUT RM2: Note is transported into cassette C, when it is not destined
00000000000 to there. *Detected by tray controller"
005A_CIN A0C4_E 2 99 005AA0C4000 "CASHOUT RM2: Note is transported into cassette D, when it is not destined
00000000000 to there. *Detected by tray controller"
005A_CIN A0C7_E 2 99 005AA0C7000 "CASHOUT RM2: Notes are transported to unexpected direction. Note is trans-
00000000000 ported into retract cassette, when it is not destined to there."
005A_CIN A0C8_E 2 99 005AA0C8000 "CASHOUT RM2: Note is transported into reject, when it is not destined to
00000000000 there. *Detected by tray controller"
005A_CIN A0CA_E 2 99 005AA0CA000 "CASHOUT RM2: No reject note, but reject sensor detect notes. *Detected by
00000000000 tray controller "
005A_CIN A0D1_E 2 99 005AA0D1000 "CASHOUT RM2: Subtract number of accumulation cassette B, C, D from
00000000000 count of S71 and count of S72 are not same. *Detected by tray controller"
005A_CIN A0D2_E 2 99 005AA0D2000 "CASHOUT RM2: Subtract number of accumulation cassette C, D from count
00000000000 of S73 and count of S74 are not same. *Detected by tray controller"
005A_CIN A0D3_E 2 99 005AA0D3000 "CASHOUT RM2: Subtract number of accumulation Cassette D from count of
00000000000 S75 and count of S77 are not same. *Detected by tray controller"
005A_CIN A0D4_E 2 99 005AA0D4000 "CASHOUT RM2: Count of S77 and count of S78 are not same. *Detected by
00000000000 tray controller "
005A_CIN A0D5_E 2 99 005AA0D5000 "CASHOUT RM2: Number of accumulation for cassette A, B, C and D and
00000000000 count of S51 are not same."
005A_CIN A0D6_E 2 99 005AA0D6000 "CASHOUT RM2: Count of S70 and count of S51 are not same."
00000000000
005A_CIN B001_E 2 99 005AB001000 "CASHOUT RM2: After request for transmission to BID, tesponse data is not
00000000000 embedded in ting buffer."
005A_CIN B002_E 2 99 005AB002000 "CASHOUT RM2: Request for transmission of the reception block, sequence
00000000000 abnormal, retries exceeded."
005A_CIN B003_E 2 99 005AB003000 "CASHOUT RM2: Request for transmission of the reception block, CRC check
00000000000 error, retries exceeded."
005A_CIN B004_E 2 99 005AB004000 "CASHOUT RM2: Request for transmission of the reception block, time-out of
00000000000 waiting for response, retries exceeded."
005A_CIN B005_E 2 99 005AB005000 "CASHOUT RM2: Request for transmission of the reception block, over-run/
00000000000 parity abnormal, retries exceeded."
005A_CIN B006_E 2 99 005AB006000 "CASHOUT RM2: The event that was not sure to exist in the matrix was
00000000000 generated."
005A_CIN B007_E 2 99 005AB007000 "CASHOUT RM2: It doesn't return even if the response from BID passes 26
00000000000 seconds."
005A_CIN B008_E 2 99 005AB008000 "CASHOUT RM2: The command transmission completion is not done. Or,
00000000000 reception completion receipt transmission completion is not done."
005A_CIN B009_E 2 99 005AB009000 "CASHOUT RM2: A soft error: There is no reception receipt though the receipt
00000000000 reception event was generated. (illegal event)"
005A_CIN B00A_E 2 99 005AB00A000 "CASHOUT RM2: A soft error: There is no reception response though the
00000000000 response reception event was generated. (illegal event)"
005A_CIN B00B_E 2 99 005AB00B000 "CASHOUT RM2: Transmission error generation when response is received."
00000000000
005A_CIN B00C_E 2 99 005AB00C000 "CASHOUT RM2: BID status error. The state doesn't become normal though it
00000000000 confirmed to BID with status request."
005A_CIN B020_E 2 99 005AB020000 "CASHOUT RM2: Transportation is cancelled, because response for recog-
00000000000 nition is not transmitted from BID."
005A_CIN C000_E 2 99 005AC000000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C001_E 2 99 005AC001000 "CASHOUT RM2: Command time-out. Communication error (BEB error $001)
00000000000 "

U25604-J-Z745-1-7600 May 2011 153

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A_CIN C002_E 2 99 005AC002000 "CASHOUT RM2: Command execution interrupted. Communication error(BEB
00000000000 error $002) "
005A_CIN C003_E 2 99 005AC003000 "CASHOUT RM2: Command not expected. Communication error (BEB error
00000000000 $003) "
005A_CIN C004_E 2 99 005AC004000 "CASHOUT RM2: Data length or content of the command invalid. Communi-
00000000000 cation error (BEB error $004)"
005A_CIN C005_E 2 99 005AC005000 "CASHOUT RM2: Data length invalid. Communication error (BEB error $005) "
00000000000
005A_CIN C006_E 2 99 005AC006000 "CASHOUT RM2: Hardware error (BEB error $006) "
00000000000
005A_CIN C007_E 2 99 005AC007000 "CASHOUT RM2: Hardware error (BEB error $007) "
00000000000
005A_CIN C008_E 2 99 005AC008000 "CASHOUT RM2: Hardware error (BEB error $008) "
00000000000
005A_CIN C009_E 2 99 005AC009000 "CASHOUT RM2: Data length invalid. Communication error (BEB error $005) "
00000000000
005A_CIN C00A_E 2 99 005AC00A000 "CASHOUT RM2: Hardware error (BEB error $00A) "
00000000000
005A_CIN C00B_E 2 99 005AC00B000 "CASHOUT RM2: Argument not admissible. Communication error (BEB error
00000000000 $00B) "
005A_CIN C00C_E 2 99 005AC00C000 "CASHOUT RM2: Defective data. Data error (BEB error $00C) "
00000000000
005A_CIN C00D_E 2 99 005AC00D000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C00E_E 2 99 005AC00E000 "CASHOUT RM2: Unknown error from banknote validator."
00000000000
005A_CIN C00F_E 2 99 005AC00F000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C010_E 2 99 005AC010000 "CASHOUT RM2: Hardware error (BEB error $010) "
00000000000
005A_CIN C011_E 2 99 005AC011000 "CASHOUT RM2: Hardware error (BEB error $011) "
00000000000
005A_CIN C012_E 2 99 005AC012000 "CASHOUT RM2: Hardware error (BEB error $012) "
00000000000
005A_CIN C013_E 2 99 005AC013000 "CASHOUT RM2: Hardware error (BEB error $013) "
00000000000
005A_CIN C014_E 2 99 005AC014000 "CASHOUT RM2: Supporting memory space deleted. Note table (BEB error
00000000000 $014) "
005A_CIN C015_E 2 99 005AC015000 "CASHOUT RM2: Supporting memory space deleted. Note table (BEB error
00000000000 $015) "
005A_CIN C016_E 2 99 005AC016000 "CASHOUT RM2: Note from supporting memory recovered. Note table (BEB
00000000000 error $016) "
005A_CIN C017_E 2 99 005AC017000 "CASHOUT RM2: Note from supporting memory not recoverable Note table
00000000000 (BEB error $017) "
005A_CIN C018_E 2 99 005AC018000 "CASHOUT RM2: Extension module not available. Hardware error (BEB error
00000000000 $018) "
005A_CIN C019_E 2 99 005AC019000 "CASHOUT RM2: Corrupt entries in note table deleted. Note table (BEB error
00000000000 $019) "
005A_CIN C01A_E 2 99 005AC01A000 "CASHOUT RM2: Unknown error from banknote validator."
00000000000
005A_CIN C01B_E 2 99 005AC01B000 "CASHOUT RM2: Unknown error from banknote validator."
00000000000
005A_CIN C01C_E 2 99 005AC01C000 "CASHOUT RM2: Unknown error from banknote validator."
00000000000
005A_CIN C01D_E 2 99 005AC01D000 "CASHOUT RM2: Unknown error from banknote validator."
00000000000
005A_CIN C01E_E 2 99 005AC01E000 "CASHOUT RM2: Unknown error from banknote validator."
00000000000
005A_CIN C01F_E 2 99 005AC01F000 "CASHOUT RM2: Unknown error from banknote validator."
00000000000
005A_CIN C020_E 2 99 005AC020000 "CASHOUT RM2: Hardware error (BEB error $020) "
00000000000
005A_CIN C021_E 2 99 005AC021000 "CASHOUT RM2: Hardware error (BEB error $021) "
00000000000
005A_CIN C022_E 2 99 005AC022000 "CASHOUT RM2: Conflict of firmware version. Firmware error (BEB error
00000000000 $022) "
005A_CIN C023_E 2 99 005AC023000 "CASHOUT RM2: Hardware error (BEB error $023) "
00000000000
005A_CIN C024_E 2 99 005AC024000 "CASHOUT RM2: Hardware error (BEB error $024) "
00000000000

154 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A_CIN C025_E 2 99 005AC025000 "CASHOUT RM2: Hardware error (BEB error $025) "
00000000000
005A_CIN C026_E 2 99 005AC026000 "CASHOUT RM2: Hardware error (BEB error $026) "
00000000000
005A_CIN C027_E 2 99 005AC027000 "CASHOUT RM2: Hardware error (BEB error $027) "
00000000000
005A_CIN C028_E 2 99 005AC028000 "CASHOUT RM2: Hardware error (BEB error $028) "
00000000000
005A_CIN C029_E 2 99 005AC029000 "CASHOUT RM2: Hardware error (BEB error $029) "
00000000000
005A_CIN C02A_E 2 99 005AC02A000 "CASHOUT RM2: Hardware error (BEB error $02A) "
00000000000
005A_CIN C02B_E 2 99 005AC02B000 "CASHOUT RM2: Hardware error (BEB error $02B) "
00000000000
005A_CIN C02C_E 2 99 005AC02C000 "CASHOUT RM2: Transport clock missing or outside permitted tolerance.
00000000000 Reader module maintenance (BEB error $02C)"
005A_CIN C02D_E 2 99 005AC02D000 "CASHOUT RM2: Note level detected (light level too high due to soiled roller or
00000000000 because a document is under reader window)."
005A_CIN C02E_E 2 99 005AC02E000 "CASHOUT RM2: Illumination regulation failed. Hardware error (BEB error
00000000000 $02E) "
005A_CIN C02F_E 2 99 005AC02F000 "CASHOUT RM2: Extrinsic light in reader module. Reader module mainte-
00000000000 nance (BEB error $02F) "
005A_CIN C030_E 2 99 005AC030000 "CASHOUT RM2: Hardware error (BEB error $030) "
00000000000
005A_CIN C031_E 2 99 005AC031000 "CASHOUT RM2: Hardware test failed. Hardware error (BEB error $031) "
00000000000
005A_CIN C032_E 2 99 005AC032000 "CASHOUT RM2: Hardware error (BEB error $032) "
00000000000
005A_CIN C033_E 2 99 005AC033000 "CASHOUT RM2: Hardware error (BEB error $033) "
00000000000
005A_CIN C034_E 2 99 005AC034000 "CASHOUT RM2: Communication time-out extension module 1. Hardware
00000000000 error (BEB error $034) "
005A_CIN C035_E 2 99 005AC035000 "CASHOUT RM2: Communication time-out extension module 2. Hardware
00000000000 error (BEB error $035) "
005A_CIN C036_E 2 99 005AC036000 "CASHOUT RM2: Communication time-out additional module. Hardware error
00000000000 (BEB error $036) "
005A_CIN C037_E 2 99 005AC037000 "CASHOUT RM2: UV-tube reader 1 malfunctioning > Reader module mainte-
00000000000 nance. Reader module maintenance (BEB error $037)"
005A_CIN C038_E 2 99 005AC038000 "CASHOUT RM2: UV-tube reader 2 malfunctioning. Reader module mainte-
00000000000 nance (BEB error $038) "
005A_CIN C039_E 2 99 005AC039000 "CASHOUT RM2: Hardware error (BEB error $039) "
00000000000
005A_CIN C03A_E 2 99 005AC03A000 "CASHOUT RM2: Corrupt EAROM parameter. Firmware error (BEB error
00000000000 $03A) "
005A_CIN C03B_E 2 99 005AC03B000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C03C_E 2 99 005AC03C000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C03D_E 2 99 005AC03D000 "CASHOUT RM2: Unknown error from banknote validator."
00000000000
005A_CIN C03E_E 2 99 005AC03E000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C03F_E 2 99 005AC03F000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C040_E 2 99 005AC040000 "CASHOUT RM2: Note memory space empty. Data error (BEB error $040) "
00000000000
005A_CIN C041_E 2 99 005AC041000 "CASHOUT RM2: Note memory space occupied. Data error (BEB error $041) "
00000000000
005A_CIN C042_E 2 99 005AC042000 "CASHOUT RM2: Note data corrupt. Data error (BEB error $042) "
00000000000
005A_CIN C043_E 2 99 005AC043000 "CASHOUT RM2: Auxiliary memory space occupied Note table (BEB error
00000000000 $043) "
005A_CIN C044_E 2 99 005AC044000 "CASHOUT RM2: Data on auxiliary memory space corrupt. Note table (BEB
00000000000 error $044) "
005A_CIN C045_E 2 99 005AC045000 "CASHOUT RM2: Note memory address invalid. Data error (BEB error $045) "
00000000000
005A_CIN C046_E 2 99 005AC046000 "CASHOUT RM2: Note data too large. Data error (BEB error $046) "
00000000000
005A_CIN C047_E 2 99 005AC047000 "CASHOUT RM2: Note memory full. Note table (BEB error $047) "
00000000000

U25604-J-Z745-1-7600 May 2011 155

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A_CIN C048_E 2 99 005AC048000 "CASHOUT RM2: Signature format incorrect. Data error (BEB error $048) "
00000000000
005A_CIN C049_E 2 99 005AC049000 "CASHOUT RM2: Signature version incorrect. Data error (BEB error $049) "
00000000000
005A_CIN C04A_E 2 99 005AC04A000 "CASHOUT RM2: Data error (BEB error $04A) "
00000000000
005A_CIN C04B_E 2 99 005AC04B000 "CASHOUT RM2: Signature data corrupt. Data error (BEB error $04B) "
00000000000
005A_CIN C04C_E 2 99 005AC04C000 "CASHOUT RM2: Signature data CRC incorrect. Data error (BEB error $04C) "
00000000000
005A_CIN C04D_E 2 99 005AC04D000 "CASHOUT RM2: Currency data CRC incorrect. Data error (BEB error $04D) "
00000000000
005A_CIN C04E_E 2 99 005AC04E000 "CASHOUT RM2: Data error (BEB error $04E) "
00000000000
005A_CIN C04F_E 2 99 005AC04F000 "CASHOUT RM2: ROM check CRC incorrect. Reader module maintenance
00000000000 (BEB error $050) "
005A_CIN C050_E 2 99 005AC050000 "CASHOUT RM2: Tape sensor not responding. Communication error (BEB
00000000000 error $051) "
005A_CIN C051_E 2 99 005AC051000 "CASHOUT RM2: Command execution on tape sensor failed. Firmware error
00000000000 (BEB error $052) "
005A_CIN C052_E 2 99 005AC052000 "CASHOUT RM2: Tape sensor calibration failed. Hardware error (BEB error
00000000000 $053) "
005A_CIN C053_E 2 99 005AC053000 "CASHOUT RM2: Tape sensor firmware download failed. Hardware error (BEB
00000000000 error $054) "
005A_CIN C054_E 2 99 005AC054000 "CASHOUT RM2: Corrupt firmware on tape sensor. Firmware error (BEB error
00000000000 $055) "
005A_CIN C055_E 2 99 005AC055000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C056_E 2 99 005AC056000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C057_E 2 99 005AC057000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C058_E 2 99 005AC058000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C059_E 2 99 005AC059000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C05A_E 2 99 005AC05A000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C05B_E 2 99 005AC05B000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C05C_E 2 99 005AC05C000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C05D_E 2 99 005AC05D000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C05E_E 2 99 005AC05E000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C05F_E 2 99 005AC05F000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C060_E 2 99 005AC060000 "CASHOUT RM2: Format check message incorrect. Data error (BEB error
00000000000 $060) $P"
005A_CIN C061_E 2 99 005AC061000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C062_E 2 99 005AC062000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C063_E 2 99 005AC063000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C064_E 2 99 005AC064000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C065_E 2 99 005AC065000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C066_E 2 99 005AC066000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C067_E 2 99 005AC067000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C068_E 2 99 005AC068000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C069_E 2 99 005AC069000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C06A_E 2 99 005AC06A000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000

156 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A_CIN C06B_E 2 99 005AC06B000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C06C_E 2 99 005AC06C000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C06D_E 2 99 005AC06D000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C06E_E 2 99 005AC06E000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C06F_E 2 99 005AC06F000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C070_E 2 99 005AC070000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C071_E 2 99 005AC071000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C072_E 2 99 005AC072000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C073_E 2 99 005AC073000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C074_E 2 99 005AC074000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C075_E 2 99 005AC075000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C076_E 2 99 005AC076000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C077_E 2 99 005AC077000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C078_E 2 99 005AC078000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C079_E 2 99 005AC079000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C07A_E 2 99 005AC07A000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C07B_E 2 99 005AC07B000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C07C_E 2 99 005AC07C000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C07D_E 2 99 005AC07D000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C07E_E 2 99 005AC07E000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C07F_E 2 99 005AC07F000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C080_E 2 99 005AC080000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C081_E 2 99 005AC081000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C082_E 2 99 005AC082000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C083_E 2 99 005AC083000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C084_E 2 99 005AC084000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C085_E 2 99 005AC085000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C086_E 2 99 005AC086000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C087_E 2 99 005AC087000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C088_E 2 99 005AC088000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C089_E 2 99 005AC089000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C08A_E 2 99 005AC08A000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C08B_E 2 99 005AC08B000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C08C_E 2 99 005AC08C000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C08D_E 2 99 005AC08D000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000

U25604-J-Z745-1-7600 May 2011 157

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A_CIN C08E_E 2 99 005AC08E000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C08F_E 2 99 005AC08F000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C090_E 2 99 005AC090000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C091_E 2 99 005AC091000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C092_E 2 99 005AC092000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C093_E 2 99 005AC093000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C094_E 2 99 005AC094000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C095_E 2 99 005AC095000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C096_E 2 99 005AC096000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C097_E 2 99 005AC097000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C098_E 2 99 005AC098000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C099_E 2 99 005AC099000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C09A_E 2 99 005AC09A000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C09B_E 2 99 005AC09B000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C09C_E 2 99 005AC09C000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C09D_E 2 99 005AC09D000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C09E_E 2 99 005AC09E000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C09F_E 2 99 005AC09F000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0A0_E 2 99 005AC0A0000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0A1_E 2 99 005AC0A1000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0A2_E 2 99 005AC0A2000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0A3_E 2 99 005AC0A3000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0A4_E 2 99 005AC0A4000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0A5_E 2 99 005AC0A5000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0A6_E 2 99 005AC0A6000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0A7_E 2 99 005AC0A7000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0A8_E 2 99 005AC0A8000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0A9_E 2 99 005AC0A9000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0AA_E 2 99 005AC0AA000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0AB_E 2 99 005AC0AB000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0AC_E 2 99 005AC0AC00 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
0
005A_CIN C0AD_E 2 99 005AC0AD00 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
0
005A_CIN C0AE_E 2 99 005AC0AE000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0AF_E 2 99 005AC0AF000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0B0_E 2 99 005AC0B0000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000

158 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A_CIN C0B1_E 2 99 005AC0B1000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0B2_E 2 99 005AC0B2000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0B3_E 2 99 005AC0B3000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0B4_E 2 99 005AC0B4000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0B5_E 2 99 005AC0B5000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0B6_E 2 99 005AC0B6000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0B7_E 2 99 005AC0B7000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0B8_E 2 99 005AC0B8000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0B9_E 2 99 005AC0B9000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0BA_E 2 99 005AC0BA000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0BB_E 2 99 005AC0BB000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0BC_E 2 99 005AC0BC00 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
0
005A_CIN C0BD_E 2 99 005AC0BD00 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
0
005A_CIN C0BE_E 2 99 005AC0BE000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0BF_E 2 99 005AC0BF000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0C0_E 2 99 005AC0C0000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0C1_E 2 99 005AC0C1000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0C2_E 2 99 005AC0C2000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0C3_E 2 99 005AC0C3000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0C4_E 2 99 005AC0C4000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0C5_E 2 99 005AC0C5000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0C6_E 2 99 005AC0C6000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0C7_E 2 99 005AC0C7000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0C8_E 2 99 005AC0C8000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0C9_E 2 99 005AC0C9000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0CA_E 2 99 005AC0CA00 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
0
005A_CIN C0CB_E 2 99 005AC0CB00 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
0
005A_CIN C0CC_E 2 99 005AC0CC00 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
0
005A_CIN C0CD_E 2 99 005AC0CD00 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
0
005A_CIN C0CE_E 2 99 005AC0CE00 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
0
005A_CIN C0CF_E 2 99 005AC0CF000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0D0_E 2 99 005AC0D0000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000

U25604-J-Z745-1-7600 May 2011 159

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A_CIN C0D1_E 2 99 005AC0D1000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0D2_E 2 99 005AC0D2000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0D3_E 2 99 005AC0D3000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0D4_E 2 99 005AC0D4000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0D5_E 2 99 005AC0D5000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0D6_E 2 99 005AC0D6000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0D7_E 2 99 005AC0D7000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0D8_E 2 99 005AC0D8000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0D9_E 2 99 005AC0D9000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0DA_E 2 99 005AC0DA00 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
0
005A_CIN C0DB_E 2 99 005AC0DB00 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
0
005A_CIN C0DC_E 2 99 005AC0DC00 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
0
005A_CIN C0DD_E 2 99 005AC0DD00 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
0
005A_CIN C0DE_E 2 99 005AC0DE00 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
0
005A_CIN C0DF_E 2 99 005AC0DF000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0E0_E 2 99 005AC0E0000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0E1_E 2 99 005AC0E1000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0E2_E 2 99 005AC0E2000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0E3_E 2 99 005AC0E3000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0E4_E 2 99 005AC0E4000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0E5_E 2 99 005AC0E5000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0E6_E 2 99 005AC0E6000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0E7_E 2 99 005AC0E7000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0E8_E 2 99 005AC0E8000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0E9_E 2 99 005AC0E9000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0EA_E 2 99 005AC0EA000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0EB_E 2 99 005AC0EB000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0EC_E 2 99 005AC0EC00 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
0
005A_CIN C0ED_E 2 99 005AC0ED00 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
0
005A_CIN C0EE_E 2 99 005AC0EE000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0EF_E 2 99 005AC0EF000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0F0_E 2 99 005AC0F0000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000

160 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A_CIN C0F1_E 2 99 005AC0F1000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0F2_E 2 99 005AC0F2000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0F3_E 2 99 005AC0F3000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0F4_E 2 99 005AC0F4000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0F5_E 2 99 005AC0F5000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0F6_E 2 99 005AC0F6000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0F7_E 2 99 005AC0F7000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0F8_E 2 99 005AC0F8000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0F9_E 2 99 005AC0F9000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0FA_E 2 99 005AC0FA000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0FB_E 2 99 005AC0FB000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0FC_E 2 99 005AC0FC000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0FD_E 2 99 005AC0FD000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0FE_E 2 99 005AC0FE000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN C0FF_E 2 99 005AC0FF000 "CASHOUT RM2: Unknown error from note reader BEB."
00000000000
005A_CIN D001_E 2 99 005AD001000 "CASHOUT RM2: Half-size note detected by dispensing from outlet."
00000000000
005A_CIN E080_E 2 99 005AE080000 "CASHOUT RM2: Erase error for flash memory. Erase command is transmitted
00000000000 to flash memory, but error is replied."
005A_CIN E081_E 2 99 005AE081000 "CASHOUT RM2: Write error for flash memory. Write command is transmitted
00000000000 to flash memory, but error is replied."
005A_CIN E082_E 2 99 005AE082000 "CASHOUT RM2: Write data for flash memory abnormal. Write data and read
00000000000 data are not same after data write."
005A_CIN E0F0_E 2 99 005AE0F0000 "CASHOUT RM2: Data of PDL command abnormal. Write data is abnormal."
00000000000
005A_CIN E0F1_E 2 99 005AE0F1000 "CASHOUT RM2: SUM of PDL abnormal. SUM check error is detected after
00000000000 normal completion of PDL."
005A_CIN E0FA_E 2 99 005AE0FA000 "CASHOUT RM2: Data of PDL command abnormal. Chain Control Data is
00000000000 abnormal."
005A_CIN E0FC_E 2 99 005AE0FC000 "CASHOUT RM2: Data of PDL command abnormal. ID of CNTL is not correct."
00000000000
005A_CIN E0FD_E 2 99 005AE0FD000 "CASHOUT RM2: Data of PDL command abnormal. BCC is not correct."
00000000000
005A_CIN E0FF_E 2 99 005AE0FF000 "CASHOUT RM2: Data of PDL command abnormal. 2nd byte of CNTL is not
00000000000 defined."
005A_CIN F001_E 2 99 005AF001000 "CASHOUT RM2: Communication troubled between main software and EBH.
00000000000 System error detected at EBH."
005A_CIN F002_E 2 99 005AF002000 "CASHOUT RM2: Communication troubled between main software and EBH.
00000000000 Time-out of WDT."
005A_CIN F003_E 2 99 005AF003000 "CASHOUT RM2: Communication troubled between main software and EBH."
00000000000
005A_CIN F004_E 2 99 005AF004000 "CASHOUT RM2: Communication troubled between main software and EBH."
00000000000
005A_CIN F029_E 2 99 005AF029000 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
00000000000 controller failed."
005A_CIN F025_E 2 99 005AF025000 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
00000000000 controller failed."
005A_CIN F02A_E 2 99 005AF02A000 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
00000000000 controller failed."
005A_CIN F02B_E 2 99 005AF02B000 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
00000000000 controller failed."
005A_CIN F02C_E 2 99 005AF02C000 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
00000000000 controller failed."
005A_CIN F015_E 2 99 005AF015000 "CASHOUT RM2: EBH internal communication abnormal. Time-out or
00000000000 receiving of NAK is detected."

U25604-J-Z745-1-7600 May 2011 161

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005A_CIN F009_E 2 99 005AF009000 "CASHOUT RM2: Memory data destroyed. Memory data destroyed because of
00000000000 memory back-up dead."
005A_CIN F011_E 2 99 005AF011000 "CASHOUT RM2: LAN of internal communication control abnormal. Status
00000000000 abnormal at completion of transmission."
005A_CIN F027_E 2 99 005AF027000 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
00000000000 controller failed."
005A_CIN F013_E 2 99 005AF013000 "CASHOUT RM2: EBH internal communication abnormal."
00000000000
005A_CIN F028_E 2 99 005AF028000 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
00000000000 controller failed."
005A_CIN F020_E 2 99 005AF020000 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
00000000000 controller failed."
005A_CIN F021_E 2 99 005AF021000 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
00000000000 controller failed."
005A_CIN F022_E 2 99 005AF022000 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
00000000000 controller failed."
005A_CIN F023_E 2 99 005AF023000 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
00000000000 controller failed."
005A_CIN F024_E 2 99 005AF024000 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
00000000000 controller failed."
005A_CIN F026_E 2 99 005AF026000 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
00000000000 controller failed."
005A_CIN F014_E 2 99 005AF014000 "CASHOUT RM2: EBH internal communication abnormal."
00000000000
005A_CIN F012_E 2 99 005AF012000 "CASHOUT RM2: EBH internal communication abnormal."
00000000000
005A_CIN F047_E 2 99 005AF047000 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
00000000000
005A_CIN F04B_E 2 99 005AF04B000 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
00000000000
005A_CIN F02D_E 2 99 005AF02D000 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
00000000000 controller failed."
005A_CIN F04A_E 2 99 005AF04A000 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
00000000000
005A_CIN F02E_E 2 99 005AF02E000 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
00000000000 controller failed."
005A_CIN F048_E 2 99 005AF048000 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
00000000000
005A_CIN F046_E 2 99 005AF046000 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
00000000000
005A_CIN F045_E 2 99 005AF045000 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
00000000000
005A_CIN F044_E 2 99 005AF044000 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
00000000000
005A_CIN F043_E 2 99 005AF043000 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
00000000000
005A_CIN F042_E 2 99 005AF042000 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
00000000000
005A_CIN F041_E 2 99 005AF041000 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
00000000000
005A_CIN F04D_E 2 99 005AF04D000 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
00000000000
005A_CIN F031_E 2 99 005AF031000 "CASHOUT RM2: EBH internal communication abnormal."
00000000000
005A_CIN F030_E 2 99 005AF030000 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
00000000000 controller failed."
005A_CIN F02F_E 2 99 005AF02F000 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
00000000000 controller failed."
005A_CIN F091_E 2 99 005AF091000 "CASHOUT RM2: EBH internal communication abnormal."
00000000000
005A_CIN F04E_E 2 99 005AF04E000 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
00000000000
005A_CIN F04C_E 2 99 005AF04C000 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
00000000000
005A_CIN F040_E 2 99 005AF040000 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
00000000000
005A_CIN F049_E 2 99 005AF049000 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
00000000000
005A_CIN 408A_E 2 99 005A408A000 "CASHOUT RM2: FL4 returned to home position, but S80 shielded."
00000000000

162 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005A_CIN 1029_E 2 99 005A1029000 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
00000000000
005A_CIN 904D_E 2 99 005A904D000 "CASHOUT RM2: EBH software control error or hardware error. EBH control
00000000000 carry out wording-of-a-telegram transmission at the tray control"
005A_CIN 904E_E 2 99 005A904E000 "CASHOUT RM2: EBH software control error or hardware error. EBH control
00000000000 carry out wording-of-a-telegram transmission at the BID"
005A_CIN 5017_E 2 99 005A5017000 "CASHOUT RM2: Notes can not be collected, because some part of notes are
00000000000 already out of outlet."
005A_CIN 501A_E 2 99 005A501A000 "CASHOUT RM2: Notes can not be collected, because some part of notes are
00000000000 already out of outlet, notes are already out of outlet obliquely"
005A_CIN 501B_E 2 99 005A501B000 "CASHOUT RM2: Notes can not be collected after no-dispensing."
00000000000
005A_CIN 500B_E 2 99 005A500B000 "CASHOUT RM2: S14 shielded "
00000000000
005A_CIN 10E9_E 2 99 005A10E9000 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
00000000000 generated according to illegal timing of SW1C watch time-up event."
005A_CIN 10E6_E 2 99 005A10E6000 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
00000000000 generated according to illegal timing of SW1C ON or OFF event."
005A_CIN 00DC_E 2 99 005A00DC000 "CASHOUT RM2: Media may be remained in cassette D or sensor is abnormal.
00000000000 *Detected by tray controller"
005A_CIN 3026_E 2 99 005A3026000 "CASHOUT RM2: Jam between S18 and S2B. Jam in path R."
00000000000
005A_CIN 300B_E 2 99 005A300B000 "CASHOUT RM2: Jam at rear of BID. Jam between S23 and S51."
00000000000
005A_CIN 400B_E 2 99 005A400B000 "CASHOUT RM2: S76 shielded at transportation: it must not be shielded -
00000000000 media may be remained or sensor is abnormal. *Detected by tray controller"
005A_CIN 8020_E 2 99 005A8020000 "CASHOUT RM2: Many BID other error 1"
00000000000
005A_CIN 8021_E 2 99 005A8021000 "CASHOUT RM2: Many BID other error 2"
00000000000
005A_CIN 8022_E 2 99 005A8022000 "CASHOUT RM2: Many BID other error 3"
00000000000
005A_CIN 8023_E 2 99 005A8023000 "CASHOUT RM2: Many BID other error 4"
00000000000
005A_CIN 8024_E 2 99 005A8024000 "CASHOUT RM2: Many BID other error 5"
00000000000

U25604-J-Z745-1-7600 May 2011 163

CSC-W32 Error Classes M-Status & M-Data Reference Tables

Euro Banknote Handler (EBH/RM2) (Class: 005E)

The following table lists the M-Status and M-Data codes assigned to the Euro
Bank Note Handler cass 005E.

Table 41: Euro Bank Note Handler (class: 005E)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
005E DEFA_E 2 00 00000000 "CASHOUT RM2: DEFAULT_ERROR"
005E DEFA_W 2 00 00000000 "CASHOUT RM2: DEFAULT_WARNING"
005E 1004_E 2 00 00000000 "CASHOUT RM2: Programming error, order received with wrong input length"
005E 100E_E 2 00 00000000 "CASHOUT RM2: CSCWINI.DLL could not be opened"
005E 100F_E 2 00 00000000 "CASHOUT RM2: Device handler has not been yet initialized"
005E 8000_E 2 00 00000000 "CASHOUT RM2: Parameter(s) of the command have a wrong syntax"
005E 8001_E 2 00 00000000 "CASHOUT RM2: Command not allowed, context error"
005E 8002_E 2 00 00000000 "CASHOUT RM2: Received USB data was not in the expected format"
005E 8003_E 2 00 00000000 "CASHOUT RM2: Executing this function is not allowed in the current transaction
mode"
005E 8004_E 2 00 00000000 "CASHOUT RM2: The pointer pSignatureData is illegal"
005E 8005_E 2 00 00000000 "CASHOUT RM2: The device driver is not compatible with loaded firmware."
005E 8100_E 2 00 00000000 "CASHOUT RM2: Wrong value for ARTICLE6 in registry with [CSCEBH]"
005E 8101_E 2 00 00000000 "CASHOUT RM2: Wrong value for UNFIT in registry with [CSCEBH]"
005E 8102_E 2 00 00000000 "CASHOUT RM2: Wrong value for UNFIT in registry with [CSCEBH]"
005E 8103_E 2 00 00000000 "CASHOUT RM2: Wrong value for UNFIT_PARAM in registry with [CSCEBH]"
005E 8104_E 2 00 00000000 "CASHOUT RM2: Wrong value for LOADER_CTL in registry with [CSCEBH]"
005E 8105_E 2 00 00000000 "CASHOUT RM2: Wrong value for CY_AUTOLOAD in registry with [CSCEBH]
005E 8106_E 2 00 00000000 "CASHOUT RM2: Wrong value for CY_MAP_NOTES in registry with [CSCEBH]"
005E 8107_E 2 00 00000000 "CASHOUT RM2: Wrong parameter in section COUNTER in registry with
[CSCEBH]"
005E 8108_E 2 00 00000000 "CASHOUT RM2: Wrong value for LED, LED_FLASH or LED_FREQ in registry with
[CSCEBH]"
005E 8109_E 2 00 00000000 "CASHOUT RM2: Wrong value for FILE_CTR in registry with [CSCEBH]"
005E 810A_E 2 00 00000000 "CASHOUT RM2: Wrong value for FILE1..FILEn in registry with [CSCEBH]"
005E 810B_E 2 00 00000000 "CASHOUT RM2: Wrong value for STORING_EXCEPTIONS in registry with
[CSCEBH]."
005E 810D_E 2 00 00000000 "CASHOUT RM2: Wrong value for REJ_RES in registry with [CSCEBH]"
005E 810E_E 2 00 00000000 "CASHOUT RM2: Wrong value for ARTICLE6_CUR in registry with [CSCEBH]"
005E 810F_E 2 00 00000000 "CASHOUT RM2: Wrong value for ESCROW_MAX in registry with [CSCEBH]"
005E 8110_E 2 00 00000000 "CASHOUT RM2: Wrong value for RESET_TARGET in registry with [CSCEBH]"
005E 8111_E 2 00 00000000 "CASHOUT RM2: Wrong value for RESET_RETRIES in registry with [CSCEBH]"
005E 8112_E 2 00 00000000 "CASHOUT RM2: Wrong value for MAX_RETRACT in registry with [CSCEBH]"
005E 8113_E 2 00 00000000 "CASHOUT RM2: Wrong value for DAYS_ITRC in registry with [CSCEBH]."
005E 8114_E 2 00 00000000 "CASHOUT RM2: Wrong value for JAM_RESOLVE in registry with [CSCEBH]."
005E 8115_E 2 00 00000000 "CASHOUT RM2: Wrong value for EXT_METAL_DETECTION_INIT in registry with
[CSCEBH]."
005E 8116_E 2 00 00000000 "CASHOUT RM2: Wrong value for IOM_EVAL in registry with [CSCEBH]."
005E 8117_E 2 00 00000000 "CASHOUT RM2: Wrong value for DISPENSE in registry with [CSCEBH]."
005E 8118_E 2 00 00000000 "CASHOUT RM2: Wrong value for AUTO_DISABLE in registry with [CSCEBH]."
005E 8119_E 2 00 00000000 "CASHOUT RM2: Wrong value for RETRACT_HISTORY in registry with
[CSCEBH]."
005E 811A_E 2 00 00000000 "CASHOUT RM2: Wrong value for MAX_NOTE_WIDTH_S in registry with
[CSCEBH]."
005E 811B_E 2 00 00000000 "CASHOUT RM2: Wrong value for SAFE_PASS in registry with [CSCEBH]."
005E 811C_E 2 00 00000000 "CASHOUT RM2: Wrong value for MIXER_OWNER in registry with [CSCEBH]."
005E 811D_E 2 00 00000000 "CASHOUT RM2: Wrong value for COUNTER_SUBST in registry with [CSCEBH]."
005E 811E_E 2 00 00000000 "CASHOUT RM2: Wrong value for INKED_NOTES_ACCEPT in registry with
[CSCEBH]."
005E 811F_E 2 00 00000000 "CASHOUT RM2: Wrong value for SKEW_... in registry with [CSCEBH]."
005E 8120_E 2 00 00000000 "CASHOUT RM2: Wrong parameter in section RETRACTS in registry with
[CSCEBH]."
005E 8121_E 2 00 00000000 "CASHOUT RM2: Wrong value for MAX_NOTE_LENGTH in registry with
[CSCEBH]."

164 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

005E 8200_E 2 00 00000000 "CASHOUT RM2: General firmware error"

005E 8201_E 2 00 00000000 "CASHOUT RM2: Command not allowed at this time, reset device required"
005E 8202_E 2 00 00000000 "CASHOUT RM2: Command not allowed at this time, reset device required"
005E 8203_E 2 00 00000000 "CASHOUT RM2: The banknotes were not properly inserted in the cashin tray"
005E 8300_E 2 00 00000000 "CASHOUT RM2: The firmware file could not be accessed"
005E 8301_E 2 00 00000000 "CASHOUT RM2: The currency file could not be accessed, check file"
005E 8302_E 2 00 00000000 "CASHOUT RM2: The firmware file contains invalid data"
005E 8303_E 2 00 00000000 "CASHOUT RM2: The currency file contains invalid data"
005E 9000_E 2 00 00000000 "CASHOUT RM2: Communication problem on the USB line to the device"
005E F001_E 2 00 00000000 "CASHOUT RM2: Device handler was configured to switch LEDs when waiting for
the removal"
005E F002_E 2 00 00000000 "CASHOUT RM2: Problem when accessing properties mandatory for article 6
handling"
005E F003_E 2 00 00000000 "CASHOUT RM2: Status that tells the application that all banknotes have been
taken"
005E F004_E 2 00 00000000 "CASHOUT RM2: Device handler has recognized that another program has used the
device"
005E F005_E 2 00 00000000 "CASHOUT RM2: Mechanical trouble during shutter command execution"
005E F006_E 2 00 00000000 "CASHOUT RM2: Metal detection defective or not connected"
005E F007_E 2 00 00000000 "CASHOUT RM2: Error during access the XLGAPI.DLL"
005E F008_E 2 00 00000000 "CASHOUT RM2: The retract command can not be completed"
005E F009_E 2 00 00000000 "CASHOUT RM2: Dispenser problem in the cash-in tray"
005E F00A_E 2 00 00000000 "CASHOUT RM2: Number or value of notes counted in the safe is different from the
ESCROW counters"
005E F00B_E 2 00 00000000 "CASHOUT RM2: Sensor check error detected during maintenance"
005E F00C_E 2 00 00000000 "CASHOUT RM2: Parameter error detected during maintenance, specified unit or
sensor number illegal"
005E F00D_E 2 00 00000000 "CASHOUT RM2: Transportation way could not be checked because of no
dispensing."

EBH Cash In (EBH/RM2) (Class: 005E_CIN)

The following table lists the M-Status and M-Data codes assigned to the Euro
Bank Note Handler class 005E_CIN. This class is set in case an error of the
EBH module has occurred in a cash in transaction.

Refer to section ”Error Class Mapping” on page 5.

Table 42: EBH Cash In (class: 005E_CIN)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
005E_CIN DEFA_E 2 99 005EDEFA "CASHIN RM2: DEFAULT_ERROR"
005E_CIN DEFA_W 2 99 005EDEFA "CASHIN RM2: DEFAULT_WARNING"
005E_CIN 1004_E 2 99 005E1004 "CASHIN RM2: Programming error, order received with wrong input length"
005E_CIN 100E_E 2 99 005E100E "CASHIN RM2: CSCWINI.DLL could not be opened"
005E_CIN 100F_E 2 99 005E100F "CASHIN RM2: Device handler has not been yet initialized"
005E_CIN 8000_E 2 99 005E8000 "CASHIN RM2: Parameter(s) of the command have a wrong syntax"
005E_CIN 8001_E 2 99 005E8001 "CASHIN RM2: Command not allowed, context error"
005E_CIN 8002_E 2 99 005E8002 "CASHIN RM2: Received USB data was not in the expected format"
005E_CIN 8003_E 2 99 005E8003 "CASHIN RM2: Executing this function is not allowed in the current transaction
mode"
005E_CIN 8004_E 2 99 005E8004 "CASHIN RM2: The pointer pSignatureData is illegal"
005E_CIN 8005_E 2 99 005E8005 "CASHIN RM2: The device driver is not compatible with loaded firmware."
005E_CIN 8100_E 2 99 005E8100 "CASHIN RM2: Wrong value for ARTICLE6 in registry with [CSCEBH]"
005E_CIN 8101_E 2 99 005E8101 "CASHIN RM2: Wrong value for UNFIT in registry with [CSCEBH]"

U25604-J-Z745-1-7600 May 2011 165

CSC-W32 Error Classes M-Status & M-Data Reference Tables

005E_CIN 8102_E 2 99 005E8102 "CASHIN RM2: Wrong value for UNFIT in registry with [CSCEBH]"
005E_CIN 8103_E 2 99 005E8103 "CASHIN RM2: Wrong value for UNFIT_PARAM in registry with [CSCEBH]"
005E_CIN 8104_E 2 99 005E8104 "CASHIN RM2: Wrong value for LOADER_CTL in registry with [CSCEBH]"
005E_CIN 8105_E 2 99 005E8105 "CASHIN RM2: Wrong value for CY_AUTOLOAD in registry with [CSCEBH]
005E_CIN 8106_E 2 99 005E8106 "CASHIN RM2: Wrong value for CY_MAP_NOTES in registry with [CSCEBH]"
005E_CIN 8107_E 2 99 005E8107 "CASHIN RM2: Wrong parameter in section COUNTER in registry with
[CSCEBH]"
005E_CIN 8108_E 2 99 005E8108 "CASHIN RM2: Wrong value for LED, LED_FLASH or LED_FREQ in registry with
[CSCEBH]"
005E_CIN 8109_E 2 99 005E8109 "CASHIN RM2: Wrong value for FILE_CTR in registry with [CSCEBH]"
005E_CIN 810A_E 2 99 005E810A "CASHIN RM2: Wrong value for FILE1..FILEn in registry with [CSCEBH]"
005E_CIN 810D_E 2 99 005E810D "CASHIN RM2: Wrong value for REJ_RES in registry with [CSCEBH]"
005E_CIN 810E_E 2 99 005E810E "CASHIN RM2: Wrong value for ARTICLE6_CUR in registry with [CSCEBH]"
005E_CIN 810F_E 2 99 005E810F "CASHIN RM2: Wrong value for ESCROW_MAX in registry with [CSCEBH]"
005E_CIN 8110_E 2 99 005E8110 "CASHIN RM2: Wrong value for RESET_TARGET in registry with [CSCEBH]"
005E_CIN 8111_E 2 99 005E8111 "CASHIN RM2: Wrong value for RESET_RETRIES in registry with [CSCEBH]"
005E_CIN 8112_E 2 99 005E8112 "CASHIN RM2: Wrong value for MAX_RETRACT in registry with [CSCEBH]"
005E_CIN 8113_E 2 99 005E8113 "CASHIN RM2: Wrong value for DAYS_ITRC in registry with [CSCEBH]."
005E_CIN 8114_E 2 99 005E8114 "CASHIN RM2: Wrong value for JAM_RESOLVE in registry with [CSCEBH]."
005E_CIN 8115_E 2 99 005E8115 "CASHIN RM2: Wrong value for EXT_METAL_DETECTION_INIT in registry with
[CSCEBH]."
005E_CIN 8116_E 2 99 005E8116 "CASHIN RM2: Wrong value for IOM_EVAL in registry with [CSCEBH]."
005E_CIN 8117_E 2 99 005E8117 "CASHIN RM2: Wrong value for DISPENSE in registry with [CSCEBH]."
005E_CIN 8118_E 2 99 005E8118 "CASHIN RM2: Wrong value for AUTO_DISABLE in registry with [CSCEBH]."
005E_CIN 8119_E 2 99 005E8119 "CASHIN RM2: Wrong value for RETRACT_HISTORY in registry with
[CSCEBH]."
005E_CIN 811A_E 2 99 005E811A "CASHIN RM2: Wrong value for MAX_NOTE_WIDTH_S in registry with
[CSCEBH]."
005E_CIN 811B_E 2 99 005E811B "CASHIN RM2: Wrong value for SAFE_PASS in registry with [CSCEBH]."
005E_CIN 811C_E 2 99 005E811C "CASHIN RM2: Wrong value for MIXER_OWNER in registry with [CSCEBH]."
005E_CIN 811D_E 2 99 005E811D "CASHIN RM2: Wrong value for COUNTER_SUBST in registry with [CSCEBH]."
005E_CIN 811E_E 2 99 005E811E "CASHIN RM2: Wrong value for INKED_NOTES_ACCEPT in registry with
[CSCEBH]."
005E_CIN 811F_E 2 99 005E811F "CASHIN RM2: Wrong value for SKEW_... in registry with [CSCEBH]."
005E_CIN 8120_E 2 99 005E8120 "CASHIN RM2: Wrong parameter in section RETRACTS in registry with
[CSCEBH]."
005E_CIN 8121_E 2 99 005E8121 "CASHIN RM2: Wrong value for MAX_NOTE_LENGTH in registry with
[CSCEBH]."
005E_CIN 8200_E 2 99 005E8200 "CASHIN RM2: General firmware error"
005E_CIN 8201_E 2 99 005E8201 "CASHIN RM2: Command not allowed at this time, reset device required"
005E_CIN 8202_E 2 99 005E8202 "CASHIN RM2: Command not allowed at this time, reset device required"
005E_CIN 8203_E 2 99 005E8203 "CASHIN RM2: The banknotes were not properly inserted in the cashin tray"
005E_CIN 8300_E 2 99 005E8300 "CASHIN RM2: The firmware file could not be accessed"
005E_CIN 8301_E 2 99 005E8301 "CASHIN RM2: The currency file could not be accessed, check file"
005E_CIN 8302_E 2 99 005E8302 "CASHIN RM2: The firmware file contains invalid data"
005E_CIN 8303_E 2 99 005E8303 "CASHIN RM2: The currency file contains invalid data"
005E_CIN 9000_E 2 99 005E9000 "CASHIN RM2: Communication problem on the USB line to the device"
005E_CIN F001_E 2 99 005EF001 "CASHIN RM2: Device handler was configured to switch LEDs when waiting for
the removal"
005E_CIN F002_E 2 99 005EF002 "CASHIN RM2: Problem when accessing properties mandatory for article 6
handling"
005E_CIN F003_E 2 99 005EF003 "CASHIN RM2: Status that tells the application that all banknotes have been
taken"
005E_CIN F004_E 2 99 005EF004 "CASHIN RM2: Device handler has recognized that another program has used
the device"
005E_CIN F005_E 2 99 005EF005 "CASHIN RM2: Mechanical trouble during command execution"
005E_CIN F006_E 2 99 005EF006 "CASHIN RM2: Metal detection defective or not connected"
005E_CIN F007_E 2 99 005EF007 "CASHIN RM2: Error during access the XLGAPI.DLL"
005E_CIN F008_E 2 99 005EF008 "CASHIN RM2: The retract command can not be completed"
005E_CIN F009_E 2 99 005EF009 "CASHIN RM2: Dispenser problem in the cash-in tray"
005E_CIN F00A_E 2 99 005EF00A "CASHIN RM2: Number or value of notes counted in the safe is different from the
ESCROW counters"
005E_CIN F00B_E 2 99 005EF00B "CASHIN RM2: Sensor check error detected during maintenance"
005E_CIN F00C_E 2 99 005EF00C "CASHIN RM2: Parameter error detected during maintenance, specified unit or
sensor number illegal"
005E_CIN F00D_E 2 99 005EF00D "CASHIN RM2: Transportation way could not be checked because of no
dispensing."

166 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

Printer Form errors (REC/DOC) (Class: 6431)

The following table lists the M-Status and M-Data codes assigned to Receipt
and Document printers if Forms printing is aktivated (FormsPrt.dll in use). The
following errors are just related to definition errors around forms print.

Table 43: Forms Print errors (REC/DOC) (class: 6431)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
6431 FF9C_E 2 00 00000000 "FORMS PRT REC: (-100) Form not found"
6431 FF9B_E 2 00 00000000 "FORMS PRT REC: (-101) Field not found"
6431 FF97_E 2 00 00000000 "FORMS PRT REC: (-105) Media overflow"
6431 FF96_E 2 00 00000000 "FORMS PRT REC: (-106) Field spec. failure"
6431 FF95_E 2 00 00000000 "FORMS PRT REC: (-107) Field error"
6431 FF94_E 2 00 00000000 "FORMS PRT REC: (-108) Media not found"
6431 FF93_E 2 00 00000000 "FORMS PRT REC: (-109) Extension not supported"
6431 FF92_E 2 00 00000000 "FORMS PRT REC: (-110) Media invalid"
6431 FF91_E 2 00 00000000 "FORMS PRT REC: (-111) Form invalid"
6431 FF90_E 2 00 00000000 "FORMS PRT REC: (-112) Field invalid"
6431 FF8F_E 2 00 00000000 "FORMS PRT REC: (-113) Media skewed"
6431 EF9C_E 2 00 00000000 "FORMS PRT DOC: (-100) Form not found"
6431 EF9B_E 2 00 00000000 "FORMS PRT DOC: (-101) Field not found"
6431 EF97_E 2 00 00000000 "FORMS PRT DOC: (-105) Media overflow"
6431 EF96_E 2 00 00000000 "FORMS PRT DOC: (-106) Field spec. failure"
6431 EF95_E 2 00 00000000 "FORMS PRT DOC: (-107) Field error"
6431 EF94_E 2 00 00000000 "FORMS PRT DOC: (-108) Media not found"
6431 EF93_E 2 00 00000000 "FORMS PRT DOC: (-109) Extension not supported"
6431 EF92_E 2 00 00000000 "FORMS PRT DOC: (-110) Media invalid"
6431 EF91_E 2 00 00000000 "FORMS PRT DOC: (-111) Form invalid"
6431 EF90_E 2 00 00000000 "FORMS PRT DOC: (-112) Field invalid"
6431 EF8F_E 2 00 00000000 "FORMS PRT DOC: (-113) Media skewed"

U25604-J-Z745-1-7600 May 2011 167

CSC-W32 Error Classes M-Status & M-Data Reference Tables

RM3 (CINEO series) errors (Class: 65C0)

The following table lists the M-Status and M-Data codes assigned to the
recycling module RM3 used in Wincor Nixdorf Cineo systems.

Table 44: RM3 (Cineo series) errors (class: 65c0)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
65C0 DEFA_E 2 09 00000000 "CASHOUT RM3: DEFAULT_ERROR"
65C0 DEFA_W 2 09 00000000 "CASHOUT RM3: DEFAULT_WARNING"
65C0 0001_E 2 09 00000000 "CASHOUT RM3: Unknown general error"
65C0 03E8_E 2 09 00000000 "CASHOUT RM3: Unknown IO error"
65C0 03E9_E 2 09 00000000 "CASHOUT RM3: Checksum error"
65C0 03EA_E 2 09 00000000 "CASHOUT RM3: Communication error"
65C0 03EB_E 2 09 00000000 "CASHOUT RM3: Unsupported function"
65C0 044C_E 2 09 00000000 "CASHOUT RM3: Unknown USB error"
65C0 044D_E 2 09 00000000 "CASHOUT RM3: USB error 1"
65C0 04B0_E 2 09 00000000 "CASHOUT RM3: Unknown secure channel error"
65C0 04B1_E 2 09 00000000 "CASHOUT RM3: Secure channel error 1"
65C0 04B2_E 2 09 00000000 "CASHOUT RM3: Secure channel error 2"
65C0 04B3_E 2 09 00000000 "CASHOUT RM3: Secure channel error 3"
65C0 04B4_E 2 09 00000000 "CASHOUT RM3: Secure channel error 4"
65C0 04B5_E 2 09 00000000 "CASHOUT RM3: Secure channel error 5"
65C0 04B6_E 2 09 00000000 "CASHOUT RM3: Secure channel error 6"
65C0 04B7_E 2 09 00000000 "CASHOUT RM3: Secure channel error 7"
65C0 04B8_E 2 09 00000000 "CASHOUT RM3: Secure channel error 8"
65C0 04B9_E 2 09 00000000 "CASHOUT RM3: Secure channel error 9"
65C0 04BA_E 2 09 00000000 "CASHOUT RM3: Secure channel error 10"
65C0 04BB_E 2 09 00000000 "CASHOUT RM3: Secure channel error 11"
65C0 04BC_E 2 09 00000000 "CASHOUT RM3: Secure channel error 12"
65C0 04BD_E 2 09 00000000 "CASHOUT RM3: Secure channel error 13"
65C0 07D0_E 2 10 00000000 "CASHOUT RM3: Unknown context error"
65C0 09C4_E 2 10 00000000 "CASHOUT RM3: CashOut operating needed"
65C0 09C5_E 2 10 00000000 "CASHOUT RM3: CashOut configuration needed"
65C0 0A28_E 2 10 00000000 "CASHOUT RM3: CashIn operating needed"
65C0 0A29_E 2 10 00000000 "CASHOUT RM3: CashIn configuration needed"
65C0 0BB8_E 2 10 00000000 "CASHOUT RM3: Unknown hardware error"
65C0 0BB9_E 2 10 00000000 "CASHOUT RM3: Defect module fatal"
65C0 0BBA_E 2 10 00000000 "CASHOUT RM3: Defect CRS collector blocked"
65C0 0BBB_E 2 10 00000000 "CASHOUT RM3: Defect uncalibrated sensors"
65C0 0BBC_E 2 10 00000000 "CASHOUT RM3: Defect manual device check needed"
65C0 0BBD_E 2 10 00000000 "CASHOUT RM3: Defect CRS io unit note jam"
65C0 0BBE_E 2 10 00000000 "CASHOUT RM3: Defect fatal motor overcurrent"
65C0 0C1C_E 2 10 00000000 "CASHOUT RM3: Jam in the entry sensor head position of the ESCROW"
65C0 0C1D_E 2 10 00000000 "CASHOUT RM3: Jam in the entry sensor head position of the single unit head"
65C0 0C1E_E 2 10 00000000 "CASHOUT RM3: Jam in the dispense sensor head position of the ATS input output
unit's dispenser"
65C0 0C1F_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor head position of the ATS input output
unit's note detector"
65C0 0C20_E 2 10 00000000 "CASHOUT RM3: Jam in the entry sensor head position of the ATS input output
unit's output tray"
65C0 0C21_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor head position of the ATS input output
unit's thickness sensor"
65C0 0C22_E 2 10 00000000 "CASHOUT RM3: Jam in the entry sensor head position of the CRS input output
unit's collector"
65C0 0C23_E 2 10 00000000 "CASHOUT RM3: Jam in the dispense Sensor head position of the CRS input output
unit's dispenser"
65C0 0C24_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor head position of the CRS input output
unit's note detector"
65C0 0C25_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor head position of the thickness sensor
in the CRS input output unit"

168 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

65C0 0C26_E 2 10 00000000 "CASHOUT RM3: Jam in the entry sensor head position of the docking transport in
the replenish unit"
65C0 0C27_E 2 10 00000000 "CASHOUT RM3: Jam in the docking transport head position Ps1"
65C0 0C28_E 2 10 00000000 "CASHOUT RM3: Jam in the docking transport head position Ps2"
65C0 0C29_E 2 10 00000000 "CASHOUT RM3: Jam in the docking transport head position Ps3"
65C0 0C2A_E 2 10 00000000 "CASHOUT RM3: Jam in the head position of the front load junction entry. "
65C0 0C2B_E 2 10 00000000 "CASHOUT RM3: Jam in the head position of the front load safe entry"
65C0 0C2C_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor head position of the note detector in
the input unit of the POS input output unit"
65C0 0C2D_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor head position of the thickness sensor
in the input unit of the POS input output unit"
65C0 0C2E_E 2 10 00000000 "CASHOUT RM3: Jam in the entry sensor head position in the output unit of the POS
input output unit jamPosition_head.posIoUnit.outputUnit.entrySensor"
65C0 0C2F_E 2 10 00000000 "CASHOUT RM3: Jam in the rear load junction entry head position"
65C0 0C30_E 2 10 00000000 "CASHOUT RM3: Jam in the rear load safe entry head position"
65C0 0C31_E 2 10 00000000 "CASHOUT RM3: Jam in the entry sensor head position in the alignment unit of the
transport unit"
65C0 0C32_E 2 10 00000000 "CASHOUT RM3: Jam in the exit sensor head position in the alignment unit of the
transport unit"
65C0 0C33_E 2 10 00000000 "CASHOUT RM3: Jam in the middle sensor head position in the alignment unit of the
transport unit"
65C0 0C34_E 2 10 00000000 "CASHOUT RM3: Jam in the transport unit head position Ps2"
65C0 0C35_E 2 10 00000000 "CASHOUT RM3: Jam in the transport unit head position Ps1"
65C0 0C36_E 2 10 00000000 "CASHOUT RM3: Jam in the transport unit head position Ps2"
65C0 0C37_E 2 10 00000000 "CASHOUT RM3: Jam in the transport unit head position Ps3"
65C0 0C38_E 2 10 00000000 "CASHOUT RM3: Jam in the entry sensor safe position in ROLLER 1 of cash unit"
65C0 0C39_E 2 10 00000000 "CASHOUT RM3: Jam in the entry sensor safe position in ROLLER 2 of cash unit"
65C0 0C3A_E 2 10 00000000 "CASHOUT RM3: Jam in the entry sensor safe position in ROLLER 3 of cash unit"
65C0 0C3B_E 2 10 00000000 "CASHOUT RM3: Jam in the entry sensor safe position in ROLLER 4 of cash unit"
65C0 0C3C_E 2 10 00000000 "CASHOUT RM3: Jam in the entry sensor safe position in SINGLE UNIT SAFE 1 of
cash unit"
65C0 0C3D_E 2 10 00000000 "CASHOUT RM3: Jam in the entry sensor safe position in SINGLE UNIT SAFE 2 of
cash unit"
65C0 0C3E_E 2 10 00000000 "CASHOUT RM3: Jam in the lower sensor safe position of in the cash unit transport
ROLLER 1 of cash unit"
65C0 0C3F_E 2 10 00000000 "CASHOUT RM3: Jam in the unit sensor safe position in the cash unit transport
ROLLER 1 of cash unit"
65C0 0C40_E 2 10 00000000 "CASHOUT RM3: Jam in the upper sensor safe position in the cash unit transport
ROLLER 1 of cash unit"
65C0 0C41_E 2 10 00000000 "CASHOUT RM3: Jam in the lower sensor safe position in the cash unit transport
ROLLER 2 of cash unit"
65C0 0C42_E 2 10 00000000 "CASHOUT RM3: Jam in the unit sensor safe position in the cash unit transport
ROLLER 2 of cash unit"
65C0 0C43_E 2 10 00000000 "CASHOUT RM3: Jam in the upper sensor safe position in the cash unit transport
ROLLER 2 of cash unit"
65C0 0C44_E 2 10 00000000 "CASHOUT RM3: Jam in the lower unit sensor safe position in the cash unit transport
ROLLER 3-ROLLER 4 of cash unit"
65C0 0C45_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor safe position in the cash unit transport
ROLLER 3- ROLLER 4 of cash unit"
65C0 0C46_E 2 10 00000000 "CASHOUT RM3: Jam in the upper unit sensor safe position in the cash unit
transport ROLLER 3- ROLLER 4 of cash unit"
65C0 0C47_E 2 10 00000000 "CASHOUT RM3: Jam in the entry sensor safe position in cash unit transport
TRIPLE UNIT COMPARTMENT 1-3 of cash unit"
65C0 0C48_E 2 10 00000000 "CASHOUT RM3: Jam in the entry sensor safe position in ROLLER 1 of cash unit"
65C0 0C49_E 2 10 00000000 "CASHOUT RM3: Jam in the entry sensor safe position in ROLLER 2 of cash unit"
65C0 0C4A_E 2 10 00000000 "CASHOUT RM3: Jam in the cassette entry sensor safe position in the cash unit
transport CASSETTE 1 of cash unit"
65C0 0C4B_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor safe position in the cash unit transport
CASSETTE 2 of cash unit"
65C0 0C4C_E 2 10 00000000 "CASHOUT RM3: Jam in the cassette entry sensor safe position in the cash unit
transport cassette 2 of cash unit"
65C0 0C4D_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor safe position in the cash unit transport
CASSETTE 2 of cash unit"
65C0 0C4E_E 2 10 00000000 "CASHOUT RM3: Jam in the cassette entry sensor safe position in the cash unit
transport CASSETTE 3 of cash unit"
65C0 0C4F_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor safe position in the cash unit transport
CASSETTE 3 of cash unit"
65C0 0C50_E 2 10 00000000 "CASHOUT RM3: Jam in the cassette entry sensor safe position in the cash unit
transport CASSETTE 4 of cash unit"

U25604-J-Z745-1-7600 May 2011 169

CSC-W32 Error Classes M-Status & M-Data Reference Tables

65C0 0C51_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor safe position in the cash unit transport
CASSETTE 4 of cash unit"
65C0 0C52_E 2 10 00000000 "CASHOUT RM3: Jam in the cassette entry sensor safe position in the cash unit
transport CASSETTE 5 of cash unit"
65C0 0C53_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor safe position in the cash unit transport
CASSETTE 5 of cash unit"
65C0 0C54_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor 1 safe position in the cash unit
transport ROLLER 1 - ROLLER 2 of cash unit"
65C0 0C55_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor 2 safe position in the cash unit
transport ROLLER 1 - ROLLER 2 of cash unit"
65C0 0C56_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor 3 safe position in the cash unit
transport ROLLER 1 - ROLLER 2 of cash unit"
65C0 0C57_E 2 10 00000000 "CASHOUT RM3: Jam in the entry sensor safe position in ROLLER 3 of cash unit"
65C0 0C58_E 2 10 00000000 "CASHOUT RM3: Jam in the entry sensor safe position in ROLLER 4 of cash unit"
65C0 0C59_E 2 10 00000000 "CASHOUT RM3: Jam in the cassette entry sensor safe position in cash unit
transport cassette 1 of cash unit"
65C0 0C5A_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor safe position in cash unit transport
CASSETTE 1 of cash unit"
65C0 0C5B_E 2 10 00000000 "CASHOUT RM3: Jam in the cassette entry sensor safe position in cash unit
transport CASSETTE 2 of cash unit"
65C0 0C5C_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor safe position in cash unit transport
CASSETTE 2 of cash unit"
65C0 0C5D_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor 1 safe position in the cash unit
transport ROLLER 3 - ROLLER 4 of cash unit"
65C0 0C5E_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor 2 safe position in the cash unit
transport ROLLER 3 - ROLLER 4 of cash unit"
65C0 0C5F_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor 3 safe position in the cash unit
transport ROLLER 3 - ROLLER 4 of cash unit"
65C0 0C60_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor 4 safe position in the cash unit
transport ROLLER 3 - ROLLER 4 of cash unit"
65C0 0C61_E 2 10 00000000 "CASHOUT RM3: Jam in the cassette sensor safe position of the distr. transport"
65C0 0C62_E 2 10 00000000 "CASHOUT RM3: Jam in the head sensor safe position of the distr. transport"
65C0 0C63_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor safe position in the thickness sensor
of the distr. transport"
65C0 0C64_E 2 10 00000000 "CASHOUT RM3: Jam in the cassette sensor safe position in the distr. transport
desk"
65C0 0C65_E 2 10 00000000 "CASHOUT RM3: Jam in the head sensor safe position in the distr. transport deskC"
65C0 0C66_E 2 10 00000000 "CASHOUT RM3: Jam in the lower cassette sensor safe position in the distr.
transport deskC"
65C0 0C67_E 2 10 00000000 "CASHOUT RM3: Jam in the reel storage sensor safe position in the distr. transport
deskC"
65C0 0C68_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor safe position in the thickness sensor
of the distr. transport deskC"
65C0 0C69_E 2 10 00000000 "CASHOUT RM3: Jam in the head CRS io unit collector"
65C0 0C6A_E 2 10 00000000 "CASHOUT RM3: Jam in the cassette entry sensor in the safe"
65C0 0C6B_E 2 10 00000000 "CASHOUT RM3: Jam in the transport sensor in the safe"
65C0 0CE4_E 2 10 00000000 "CASHOUT RM3: Open switch in head of ESCROW"
65C0 0CE5_E 2 10 00000000 "CASHOUT RM3: Open switch in head of the ATS input output unit"
65C0 0CE6_E 2 10 00000000 "CASHOUT RM3: Open switch in head of the CRS input output unit"
65C0 0CE7_E 2 10 00000000 "CASHOUT RM3: Open switch in head of the input unit of the POS input output unit"
65C0 0CE8_E 2 10 00000000 "CASHOUT RM3: Open switch in head of the safety switch"
65C0 0CE9_E 2 10 00000000 "CASHOUT RM3: Open switch in head of the collector transport open sensor of the
transport unit"
65C0 0CEA_E 2 10 00000000 "CASHOUT RM3: Open switch in head of the lower transport open sensor of the
transport unit"
65C0 0CEB_E 2 10 00000000 "CASHOUT RM3: Open switch in head of the main transport open sensor of the
transport unit"
65C0 0CEC_E 2 10 00000000 "CASHOUT RM3: Open switch in head of the unlock switch"
65C0 0CED_E 2 10 00000000 "CASHOUT RM3: Open switch in safe of the cash unit transport ROLLER 1 of cash
unit"
65C0 0CEE_E 2 10 00000000 "CASHOUT RM3: Open switch in safe of the cash unit transport ROLLER 2 of cash
unit"
65C0 0CEF_E 2 10 00000000 "CASHOUT RM3: Open switch in safe of the cash unit transport ROLLER 3 -
ROLLER 4 of cash unit"
65C0 0CF0_E 2 10 00000000 "CASHOUT RM3: Open Switch in safe of the cash unit transport CASSETTE 1 of
cash unit"
65C0 0CF1_E 2 10 00000000 "CASHOUT RM3: Open switch in safe of the cash unit transport CASSETTE 2 of
cash unit"
65C0 0CF2_E 2 10 00000000 "CASHOUT RM3: Open Switch in safe of the cash unit transport CASSETTE 3 of
cash unit"

170 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

65C0 0CF3_E 2 10 00000000 "CASHOUT RM3: Open switch in safe of the cash unit transport CASSETTE 4 of
cash unit"
65C0 0CF4_E 2 10 00000000 "CASHOUT RM3: Open switch in safe of the cash unit transport CASSETTE 5 of
cash unit"
65C0 0CF5_E 2 10 00000000 "CASHOUT RM3: Open switch in safe of the cash unit transport CASSETTE 1 of
cash unit"
65C0 0CF6_E 2 10 00000000 "CASHOUT RM3: Open switch in safe of the cash unit tranport CASSETTE 2 of cash
unit"
65C0 0CF7_E 2 10 00000000 "CASHOUT RM3: Open switch in safe of the cash unit transport ROLLER 3 -
ROLLER 4 of cash unit"
65C0 0CF8_E 2 10 00000000 "CASHOUT RM3: Open switch in safe of the transport open sensor of the distr.
transport"
65C0 0CF9_E 2 10 00000000 "CASHOUT RM3: Open switch in safe of the cover locked sensor of the distr.
transport deskC"
65C0 0CFA_E 2 10 00000000 "CASHOUT RM3: Open switch in safe of the safety switch"
65C0 0CFB_E 2 10 00000000 "CASHOUT RM3: Open switch in safe of the shadow door sensor"
65C0 0CFC_E 2 10 00000000 "CASHOUT RM3: Open switch in safe of the unlock switch sensor of the distr.
transport deskC"
65C0 0CFD_E 2 10 00000000 "CASHOUT RM3: Open switch in safe of the distr. transport locked sensor of the
distr. transport deskC"
65C0 0CFE_E 2 10 00000000 "CASHOUT RM3: Open switch in head of the escrow transport open sensor of the
transport unit"
65C0 0CFF_E 2 10 00000000 "CASHOUT RM3: Open switch in safe of the reject retract locked sensor of the distr.
transport"
65C0 0DAC_E 2 10 00000000 "CASHOUT RM3: Error state in head of the ESCROW"
65C0 0DAD_E 2 10 00000000 "CASHOUT RM3: Error state in head of the ESCROW's entry sensor"
65C0 0DAE_E 2 10 00000000 "CASHOUT RM3: Error state in head of the SINGLE UNIT HEAD"
65C0 0DAF_E 2 10 00000000 "CASHOUT RM3: Error state in head of the entry sensor of the SINGLE UNIT HEAD"
65C0 0DB0_E 2 10 00000000 "CASHOUT RM3: Error state in head of the ATS input output unit"
65C0 0DB1_E 2 10 00000000 "CASHOUT RM3: Error state in head of the clamp detector of the ATS input output
unit"
65C0 0DB2_E 2 10 00000000 "CASHOUT RM3: Error state in head of the dispenser of the ATS input output unit"
65C0 0DB3_E 2 10 00000000 "CASHOUT RM3: Error state in head of the dispense sensor in the dispenser of the
ATS input output unit"
65C0 0DB4_E 2 10 00000000 "CASHOUT RM3: Error state in head of the dispense unit in the dispenser of the ATS
input output unit"
65C0 0DB5_E 2 10 00000000 "CASHOUT RM3: Error state in head of the input tray of the input output unit"
65C0 0DB6_E 2 10 00000000 "CASHOUT RM3: Error state in head of the pressure unit in the input tray of the ATS
input output unit"
65C0 0DB7_E 2 10 00000000 "CASHOUT RM3: Error state in the note detector of the ATS input output unit"
65C0 0DB8_E 2 10 00000000 "CASHOUT RM3: Error state in head of the transport sensor in the note detector of
the ATS input output unit"
65C0 0DB9_E 2 10 00000000 "CASHOUT RM3: Error state in head of the output tray of the ATS input output unit"
65C0 0DBA_E 2 10 00000000 "CASHOUT RM3: Error state in head of the entry sensor in the output tray of the ATS
input output unit"
65C0 0DBB_E 2 10 00000000 "CASHOUT RM3: Error state in the thickness sensor of the ATS input output unit"
65C0 0DBC_E 2 10 00000000 "CASHOUT RM3: Error state in head of the transport sensor in the thickness sensor
of the ATS input output unit"
65C0 0DBD_E 2 10 00000000 "CASHOUT RM3: Error state in head of the BIM"
65C0 0DBE_E 2 10 00000000 "CASHOUT RM3: Error state in head of the CRS input output module"
65C0 0DBF_E 2 10 00000000 "CASHOUT RM3: Error state in head of the clamp detector of the CRS input output
module"
65C0 0DC0_E 2 10 00000000 "CASHOUT RM3: Error state in head of the collector of the CRS input output unit"
65C0 0DC1_E 2 10 00000000 "CASHOUT RM3: Error state in head of the entry sensor in the collector of the CRS
input output module"
65C0 0DC2_E 2 10 00000000 "CASHOUT RM3: Error state in head of the limited stepper wrapper in the collector
of the CRS input output module"
65C0 0DC3_E 2 10 00000000 "CASHOUT RM3: Error state in head of the pressure unit in the collector of the CRS
input output unit"
65C0 0DC4_E 2 10 00000000 "CASHOUT RM3: Error state in head of the transport belt in the collector of the CRS
input output unit"
65C0 0DC5_E 2 10 00000000 "CASHOUT RM3: Error state in head of the dispenser of the CRS input output unit"
65C0 0DC6_E 2 10 00000000 "CASHOUT RM3: Error state in head of the dispense sensor in the dispenser of the
CRS input output unit"
65C0 0DC7_E 2 10 00000000 "CASHOUT RM3: Error state in head of the dispense unit in the dispenser of the
CRS input output unit"
65C0 0DC8_E 2 10 00000000 "CASHOUT RM3: Error state in head of the note detector of the CRS input output
unit"
65C0 0DC9_E 2 10 00000000 "CASHOUT RM3: Error state in head of the transport sensor in the note detector of
the CRS input output unit"

U25604-J-Z745-1-7600 May 2011 171

CSC-W32 Error Classes M-Status & M-Data Reference Tables

65C0 0DCA_E 2 10 00000000 "CASHOUT RM3: Error state in head of the thickness sensor of the CRS input output
unit"
65C0 0DCB_E 2 10 00000000 "CASHOUT RM3: Error state in head of the transport sensor in the thickness sensor
of the CRS input output unit"
65C0 0DCC_E 2 10 00000000 "CASHOUT RM3: Error state in head of the tray of the CRS input output unit"
65C0 0DCD_E 2 10 00000000 "CASHOUT RM3: Error state in head of the pressure unit in the tray of the CRS input
output unit"
65C0 0DCE_E 2 10 00000000 "CASHOUT RM3: Error state in head of the docking transport"
65C0 0DCF_E 2 10 00000000 "CASHOUT RM3: Error state in head of the REPLENISH UNIT in the docking
transport"
65C0 0DD0_E 2 10 00000000 "CASHOUT RM3: Error state in head of the entry sensor in the REPLENISH UNIT
of the docking transport"
65C0 0DD1_E 2 10 00000000 "CASHOUT RM3: Error state in head of the unlock magnet of the docking transport"
65C0 0DD2_E 2 10 00000000 "CASHOUT RM3: Error state in head of the controlled magnet of the unlock magnet
of the docking transport"
65C0 0DD3_E 2 10 00000000 "CASHOUT RM3: Error state in head of the docking transport Ps1"
65C0 0DD4_E 2 10 00000000 "CASHOUT RM3: Error state in head of the docking transport Ps2"
65C0 0DD5_E 2 10 00000000 "CASHOUT RM3: Error state in head of the docking transport Ps3"
65C0 0DD6_E 2 10 00000000 "CASHOUT RM3: Error state in head of the front load junction entry"
65C0 0DD7_E 2 10 00000000 "CASHOUT RM3: Error state in head of the front load safe entry"
65C0 0DD8_E 2 10 00000000 "CASHOUT RM3: Error state in head of the POS input output unit"
65C0 0DD9_E 2 10 00000000 "CASHOUT RM3: Error state in head of the input unit of the POS input output unit"
65C0 0DDA_E 2 10 00000000 "CASHOUT RM3: Error state in head of the clamp detector in the in-output unit"
65C0 0DDB_E 2 10 00000000 "CASHOUT RM3: Error state in head of the dispense unit in the in-output unit"
65C0 0DDC_E 2 10 00000000 "CASHOUT RM3: Error state in head of the input tray in the in-output unit"
65C0 0DDD_E 2 10 00000000 "CASHOUT RM3: Error state in head of the note detector in the in-output unit"
65C0 0DDE_E 2 10 00000000 "CASHOUT RM3: Error state in head of the transport sensor of the note detector in
the in-output unit"
65C0 0DDF_E 2 10 00000000 "CASHOUT RM3: Error state in head of the pressure unit in the in-output unit"
65C0 0DE0_E 2 10 00000000 "CASHOUT RM3: Error state in head of the thickness sensor in the in-output unit"
65C0 0DE1_E 2 10 00000000 "CASHOUT RM3: Error state in head of the transport sensor of the thickness sensor
in the in-output unit"
65C0 0DE2_E 2 10 00000000 "CASHOUT RM3: Error state in head of the output unit"
65C0 0DE3_E 2 10 00000000 "CASHOUT RM3: Error state in head of the entry sensor in the output unit"
65C0 0DE4_E 2 10 00000000 "CASHOUT RM3: Error state in head of the rear load junction entry"
65C0 0DE5_E 2 10 00000000 "CASHOUT RM3: Error state in head of the rear load safe entry"
65C0 0DE6_E 2 10 00000000 "CASHOUT RM3: Error state in head of the reject junctions drive"
65C0 0DE7_E 2 10 00000000 "CASHOUT RM3: Error state in head of the transport unit"
65C0 0DE8_E 2 10 00000000 "CASHOUT RM3: Error state in head of the alignment unit of the transport unit"
65C0 0DE9_E 2 10 00000000 "CASHOUT RM3: Error state in head of the entry sensor in the alignment unit of the
transport unit"
65C0 0DEA_E 2 10 00000000 "CASHOUT RM3: Error state in the head of the exit sensor in the alignment unit of
the transport unit"
65C0 0DEB_E 2 10 00000000 "CASHOUT RM3: Error state in head of the middle sensor in the alignment unit of
the transport unit"
65C0 0DEC_E 2 10 00000000 "CASHOUT RM3: Error state in head of the cash in junction of the transport unit"
65C0 0DED_E 2 10 00000000 "CASHOUT RM3: Error state in head of the cash in junction magnet in the transport
unit"
65C0 0DEE_E 2 10 00000000 "CASHOUT RM3: Error state in head of the collector junction of the transport unit"
65C0 0DEF_E 2 10 00000000 "CASHOUT RM3: Error state in head of the collector junction magnet of the transport
unit"
65C0 0DF0_E 2 10 00000000 "CASHOUT RM3: Error state in head of the docking unit junction of the transport
unit"
65C0 0DF1_E 2 10 00000000 "CASHOUT RM3: Error state in head of the docking unit junction magnet of the
transport unit"
65C0 0DF2_E 2 10 00000000 "CASHOUT RM3: Error state in head of the escrow junction of the transport unit"
65C0 0DF3_E 2 10 00000000 "CASHOUT RM3: Error state in head of the escrow junction magnet of the transport
unit"
65C0 0DF4_E 2 10 00000000 "CASHOUT RM3: Error state in head of the head box junction of the transport unit"
65C0 0DF5_E 2 10 00000000 "CASHOUT RM3: Error state in head of the head box junction magnet of the
transport unit"
65C0 0DF6_E 2 10 00000000 "CASHOUT RM3: Error state in head of the transport unit Ps1"
65C0 0DF7_E 2 10 00000000 "CASHOUT RM3: Error state in head of the transport unit Ps1"
65C0 0DF8_E 2 10 00000000 "CASHOUT RM3: Error state in head of the transport unit Ps2"
65C0 0DF9_E 2 10 00000000 "CASHOUT RM3: Error state in head of the transport unit Ps3"
65C0 0DFA_E 2 10 00000000 "CASHOUT RM3: Error state in head of the unfit junction of the transport unit"
65C0 0DFB_E 2 10 00000000 "CASHOUT RM3: Error state in head of the unfit junction magnet of the transport
unit"

172 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

65C0 0DFC_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the cash unit string 1 ROLLER 1"
65C0 0DFD_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the entry sensor of the cash unit string 1
ROLLER 1"
65C0 0DFE_E 2 10 00000000 "CASHOUT RM3: Error state in safe of cash unit string 2 ROLLER 2"
65C0 0DFF_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the entry sensor of the cash unit string 1
ROLLER 2"
65C0 0E00_E 2 10 00000000 "CASHOUT RM3: Error state in safe of cash unit string 1 ROLLER 3"
65C0 0E01_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the entry sensor of the cash unit string 1
ROLLER 3"
65C0 0E02_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the cash unit string 1 ROLLER 4"
65C0 0E03_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the entry sensor of the cash unit string 1
ROLLER 4"
65C0 0E04_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the SINGLE UNIT SAFE 1 of cash unit"
65C0 0E05_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the entry sensor in the SINGLE UNIT SAFE
1 of cash unit"
65C0 0E06_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the SINGLE UNIT SAFE 2 of cash unit"
65C0 0E07_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the entry sensor in the SINGLE UNIT SAFE
2 of cash unit"
65C0 0E08_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the TRIPLE UNIT COMPARTMENT 1 of cash
unit"
65C0 0E09_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the TRIPLE UNIT COMPARTMENT 2 of cash
unit"
65C0 0E0A_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the TRIPLE UNIT COMPARTMENT 3 of cash
unit"
65C0 0E0B_E 2 10 00000000 "CASHOUT RM3: ROLLER1 Error state in safe of ROLLER 1 in the cash unit
transport of cash unit"
65C0 0E0C_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the lower sensor of ROLLER 1 in the cash
unit transport of cash unit"
65C0 0E0D_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the stepper junction of ROLLER 1 in the cash
unit transport of cash unit"
65C0 0E0E_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the unit sensor of ROLLER 1 in the cash unit
transport of cash unit"
65C0 0E0F_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the upper sensor of ROLLER 1 in the cash
unit transport of cash unit"
65C0 0E10_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the ROLLER 2 in the cash unit transport of
cash unit"
65C0 0E11_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the lower sensor of ROLLER 2 in the cash
unit transport of cash unit"
65C0 0E12_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the stepper junction of ROLLER 2 in teh cash
unit transport of cash unit"
65C0 0E13_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the unit sensor of ROLLER 2 of the cash unit
transport of cash unit"
65C0 0E14_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the upper sensor of ROLLER 2 in the cash
unit transport of cash unit"
65C0 0E15_E 2 10 00000000 "CASHOUT RM3: Error state in safe of ROLLER 3 - ROLLER 4 in the cash unit
transport of cash unit"
65C0 0E16_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the junction of ROLLER 3 - ROLLER 4 in the
cash unit transport of cash unit"
65C0 0E17_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the lower unit sensor of ROLLER 3 - ROLLER
4 in the cash unit transport of cash unit"
65C0 0E18_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the magnet of ROLLER 3 - ROLLER 4 in the
cash unit transport of cash unit"
65C0 0E19_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the transport sensor of ROLLER 3 - ROLLER
4 in the cash unit transport of cash unit"
65C0 0E1A_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the upper unit sensor of ROLLER 3 -
ROLLER 4 in the cash unit transport of cash unit"
65C0 0E1B_E 2 10 00000000 "CASHOUT RM3: Error state in safe of TRIPLE UNIT COMPARTMENT 1 - TRIPLE
UNIT COMPARTMENT 2 - TRIPLE UNIT COMPARTMENT 3 in the cash unit
transport of cash unit"
65C0 0E1C_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the compartment 1 magnet of TRIPLE UNIT
COMPARTMENT 1 - TRIPLE UNIT COMPARTMENT 2 - TRIPLE UNIT
COMPARTMENT 3 in the cash unit transport of cash unit"
65C0 0E1D_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the entry sensor of TRIPLE UNIT
COMPARTMENT 1 - TRIPLE UNIT COMPARTMENT 2 - TRIPLE UNIT
COMPARTMENT 3 in the cash unit transport of cash unit"
65C0 0E1E_E 2 10 00000000 "CASHOUT RM3: Error state in safe of CASSETTE 1 in cash unit"
65C0 0E1F_E 2 10 00000000 "CASHOUT RM3: Error state in safe of CASSETTE 2 in cash unit"
65C0 0E20_E 2 10 00000000 "CASHOUT RM3: Error state in safe of CASSETTE 3 in cash unit"
65C0 0E21_E 2 10 00000000 "CASHOUT RM3: Error state in safe of CASSETTE 4 in cash unit"
65C0 0E22_E 2 10 00000000 "CASHOUT RM3: Error state in safe of CASSETTE 5 in cash unit"

U25604-J-Z745-1-7600 May 2011 173

CSC-W32 Error Classes M-Status & M-Data Reference Tables

65C0 0E23_E 2 10 00000000 "CASHOUT RM3: Error state in safe of ROLLER 1 in cash unit"
65C0 0E24_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the entry sensor of ROLLER 2 in cash unit"
65C0 0E25_E 2 10 00000000 "CASHOUT RM3: Error state in safe of ROLLER 2 in cash unit"
65C0 0E26_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the entry sensor of ROLLER 2 in cash unit"
65C0 0E27_E 2 10 00000000 "CASHOUT RM3: Error state in safe of CASSETTE 1 in the cash unit transport of
cash unit"
65C0 0E28_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the cassette entry sensor of CASSETTE 1 in
the cash unit transport of cash unit"
65C0 0E29_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the DC motor retreat plate of CASSETTE 1
in the cash unit transport of cash unit"
65C0 0E2A_E 2 10 00000000 "CASHOUT RM3: Error state in the dispense unit of CASSETTE 1 in the cash unit
transport of cash unit"
65C0 0E2B_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the junction of CASSETTE 1 in the cash unit
transport of cash unit"
65C0 0E2C_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the junction magnet of CASSETTE 1 in the
cash unit transport of cash unit"
65C0 0E2D_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the paddle bottom of CASSETTE 1 in the
cash unit transport of cash unit"
65C0 0E2E_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the paddle top of CASSETTE 1 in the cash
unit transport of cash unit"
65C0 0E2F_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the pressure unit of CASSETTE 1 in the cash
unit transport of cash unit"
65C0 0E30_E 2 10 00000000 "CASHOUT RM3: Error State in safe of the transport sensor of CASSETTE 2 in cash
unit transport of cash unit"
65C0 0E31_E 2 10 00000000 "CASHOUT RM3: Error state in safe of CASSETTE 2 in the cash unit transport of
cash unit string 2"
65C0 0E32_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the cassette entry sensor of CASSETTE 2 in
the cash unit transport of cash unit"
65C0 0E33_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the DC motor retreat plate of CASSETTE 2
in the cash unit transport of cash unit"
65C0 0E34_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the dispense unit of CASSETTE 2 in the cash
unit transport of cash unit"
65C0 0E35_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the junction of CASSETTE 2 in the cash unit
transport of cash unit"
65C0 0E36_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the junction magnet of CASSETTE 2 in the
cash unit transport of cash unit"
65C0 0E37_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the paddle bottom of CASSETTE 2 in teh
cash unit transport of cash unit"
65C0 0E38_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the paddle top of CASSETTE 2 in the cash
unit transport of cash unit"
65C0 0E39_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the pressure unit of CASSETTE 2 in the cash
unit transport of cash unit"
65C0 0E3A_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the transport sensor of CASSETTE 2 in the
cash unit transport of cash unit"
65C0 0E3B_E 2 10 00000000 "CASHOUT RM3: Error state in safe of CASSETTE 3 in the cash unit transport of
cash unit"
65C0 0E3C_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the cassette entry sensor of CASSETTE 3 in
the cash unit transport of cash unit"
65C0 0E3D_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the DC motor retreat plate of CASSETTE 3
in the cash unit transport of cash unit"
65C0 0E3E_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the dispense unit in CASSETTE 3 in the cash
unit transport of cash unit"
65C0 0E3F_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the junction of CASSETTE 3 in the cash unit
transport of cash unit"
65C0 0E40_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the junction magnet of CASSETTE 3 in the
cash unit transport of cash unit"
65C0 0E41_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the paddle bottom of CASSETTE 3 in the
cash unit transport of cash unit"
65C0 0E42_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the paddle top of CASSETTE 3 in the cash
unit transport of cash unit"
65C0 0E43_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the pressure unit of CASSETTE 3 in the cash
unit transport of cash unit"
65C0 0E44_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the transport sensor of CASSETTE 3 in the
cash unit transport of cash unit"
65C0 0E45_E 2 10 00000000 "CASHOUT RM3: Error state in safe of CASSETTE 4 in the cash unit transport of
cash unit"
65C0 0E46_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the cassette entry sensor of CASSETTE 4 of
the cash unit transport in cash unit"
65C0 0E47_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the DC motor retreat plate of CASSETTE 4
in the cash unit transport of cash unit"

174 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

65C0 0E48_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the dispense unit of CASSETTE 4 in the cash
unit transport of cash unit"
65C0 0E49_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the junction of CASSETTE 4 in the cash unit
transport of cash unit"
65C0 0E4A_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the junction magnet of CASSETTE 4 in the
cash unit transport of cash unit"
65C0 0E4B_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the paddle bottom of CASSETTE 4 in the
cash unit transport of cash unit"
65C0 0E4C_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the paddle top of CASSETTE 4 in the cash
unit transport of cash unit"
65C0 0E4D_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the pressure unit of CASSETTE 4 in the cash
unit transport of cash unit"
65C0 0E4E_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the transport sensor of CASSETTE 4 in the
cash unit transport of cash unit"
65C0 0E4F_E 2 10 00000000 "CASHOUT RM3: Error state in safe of CASSETTE 5 in the cash unit transport of
cash unit"
65C0 0E50_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the cassette entry sensor of CASSETTE 5 in
the cash unit transport of cash unit"
65C0 0E51_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the DC motor retreat plate of CASSETTE 5
in the cash unit transport of cash unit "
65C0 0E52_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the dispense unit of CASSETTE 5 in the cash
unit transport of cash unit"
65C0 0E53_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the junction of CASSETTE 5 in the cash unit
transport of cash unit"
65C0 0E54_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the junction magnet of CASSETTE 5 in the
cash unit transport of cash unit"
65C0 0E55_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the paddle bottom of CASSETTE 5 in the
cash unit transport of cash unit"
65C0 0E56_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the paddle top of CASSETTE 5 in the cash
unit transport of cash unit"
65C0 0E57_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the pressure unit of CASSETTE 5 in the cash
unit transport of cash unit"
65C0 0E58_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the transport sensor of CASSETTE 5 in the
cash unit transport of cash unit"
65C0 0E59_E 2 10 00000000 "CASHOUT RM3: Error state in safe of ROLLER 1 - ROLLER 2 in the cash unit
transport of the cash unit string"
65C0 0E5A_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the junction magnet of ROLLER 1 - ROLLER
2 in the cash unit transport of cash unit"
65C0 0E5B_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the transport sensor 1 of ROLLER 1 -
ROLLER 2 in the cash unit transport of cash unit"
65C0 0E5C_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the transport sensor 2 of ROLLER 1 -
ROLLER 2 in the cash unit transport of cash unit"
65C0 0E5D_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the transport sensor 3 of ROLLER 1 -
ROLLER 2 in the cash unit transport of cash unit"
65C0 0E5E_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the upper junction of ROLLER 1 - ROLLER
2 in the cash unit transport of cash unit"
65C0 0E5F_E 2 10 00000000 "CASHOUT RM3: Error state in safe of CASSETTE 1 in cash unit string 3"
65C0 0E60_E 2 10 00000000 "CASHOUT RM3: Error state in safe of CASSETTE 2 in cash unit string 3"
65C0 0E61_E 2 10 00000000 "CASHOUT RM3: Error state in safe of ROLLER 3 in cash unit 3"
65C0 0E62_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the entry sensor of ROLLER 3 in cash unit"
65C0 0E63_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the ROLLER 4 if cash unit"
65C0 0E64_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the entry sensor of ROLLER 4 in cash unit"
65C0 0E65_E 2 10 00000000 "CASHOUT RM3: Error state in safe of CASSETTE 1 in the cash unit transport of
cash unit"
65C0 0E66_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the cassette entry sensor of CASSETTE 1 in
the cash unit transport of cash unit"
65C0 0E67_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the DC motor retreat plate of CASSETTE 1
in the cash unit transport of cash unit"
65C0 0E68_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the dispense unit of CASSETTE 1 in the cash
unit transport of cash unit"
65C0 0E69_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the junction of CASSETTE 1 in the cash unit
transport of cash unit"
65C0 0E6A_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the junction magnet of CASSETTE 1 in the
cash unit transport of cash unit"
65C0 0E6B_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the paddle bottom of CASSETTE 1 in the
cash unit transport of cash unit"
65C0 0E6C_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the paddle top of CASSETTE 1 in the cash
unit transport of cash unit"
65C0 0E6D_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the pressure unit of CASSETTE 1 in the cash
unit transport of cash unit"

U25604-J-Z745-1-7600 May 2011 175

CSC-W32 Error Classes M-Status & M-Data Reference Tables

65C0 0E6E_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the transport sensor of CASSETTE 1 in the
cash unit transport of cash unit"
65C0 0E6F_E 2 10 00000000 "CASHOUT RM3: Error in state of CASSETTE 2 in the cash unit transport of cash
unit string 3"
65C0 0E70_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the cassette entry sensor of CASSETTE 2 in
the cash unit transport of cash unit string 3"
65C0 0E71_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the DC motor retreat plate of CASSETTE 2
in the cash unit transport of cash unit string 3"
65C0 0E72_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the dispense unit of CASSETTE 2 in the cash
unit transport of cash unit string 3"
65C0 0E73_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the junction of CASSETTE 2 in the cash unit
transport of cash unit string 3"
65C0 0E74_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the junction magnet of CASSETTE 2 in the
cash unit transport of cash unit string 3"
65C0 0E75_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the paddle bottom of CASSETTE 2 in the
cash unit transport of cash unit string 3"
65C0 0E76_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the paddle top of CASSETTE 2 in the cash
unit transport of cash unit string 3"
65C0 0E77_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the presssure unit of CASSETTE 2 in the
cash unit transport of cash unit string 3"
65C0 0E78_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the transport sensor of CASSETTE 2 in the
cash unit transport of cash unit string 3"
65C0 0E79_E 2 10 00000000 "CASHOUT RM3: Error state in safe of ROLLER 3 - ROLLER 4 in the cash unit
transport of cash unit"
65C0 0E7A_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the lower junction of ROLLER 3 - ROLLER 4
in the cash unit transport of cash unit"
65C0 0E7B_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the lower junction single magnet of ROLLER
3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E7C_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the lower junction twin magnet of ROLLER 3
- ROLLER 4 in the cash unit transport of cash unit"
65C0 0E7D_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the transport sensor 1 of ROLLER 3 -
ROLLER 4 in the cash unit transport of cash unit"
65C0 0E7E_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the transport sensor 2 of ROLLER 3 -
ROLLER 4 in the cash unit transport of cash unit"
65C0 0E7F_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the transport sensor 3 of ROLLER 3 -
ROLLER 4 in the cash unit transport of cash unit"
65C0 0E80_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the transport sensor of 4 ROLLER 3 -
ROLLER 4 in the cash unit transport of cash unit"
65C0 0E81_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the upper junction of ROLLER 3 - ROLLER
4 in the cash unit transport of cash unit"
65C0 0E82_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the upper junction single magnet of ROLLER
3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E83_E 2 10 00000000 "CASHOUT RM3: Error in safe of the upper junction twin magnet of ROLLER 3 -
ROLLER 4 in the cash unit transport of cash unit"
65C0 0E84_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the distr. transport"
65C0 0E85_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the cassette sensor if the distr. transport"
65C0 0E86_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the head sensor of the distr. transport"
65C0 0E87_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the reject junction magnet of the distr.
transport"
65C0 0E88_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the retract junction magnet in the distr.
transport"
65C0 0E89_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the thickness sensor of the distr. transport"
65C0 0E8A_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the transport sensor in the thickness sensor
of the distr. transport"
65C0 0E8B_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the distr. transport deskC"
65C0 0E8C_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the cassette sensor of the distr. transport
deskC"
65C0 0E8D_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the head sensor of the distr. transport deskC"
65C0 0E8E_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the lower box junction of the distr. transport
deskC"
65C0 0E8F_E 2 10 00000000 "CASHOUT RM3: e Error state in safe of the lower box junction magnet of the distr.
transport deskC"
65C0 0E90_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the lower cassette sensor of the distr.
transport deskC"
65C0 0E91_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the reel storage sensor of the distr. transport
deskC"
65C0 0E92_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the thickness sensor of the distr. transport
deskC"
65C0 0E93_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the transport sensor in the thickness sensor
of the distr. transport deskC"

176 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

65C0 0E94_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the the triple junction of the distr. transport
deskC"
65C0 0E95_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the triple junction single magnet of the distr.
transport deskC"
65C0 0E96_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the triple junction twin magnet of the distr.
transport deskC"
65C0 0E97_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the upper box junction of the distr. transport
deskC"
65C0 0E98_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the upper box junction magnet of the distr.
transport deskC"
65C0 0E99_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the generic distr. transport"
65C0 0E9A_E 2 10 00000000 "CASHOUT RM3: Error state in safe of cassette 3"
65C0 0E9B_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the cash unit transport paddle bottom"
65C0 0E9C_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the cash unit transport paddle top"
65C0 0E9D_E 2 10 00000000 "CASHOUT RM3: Error state in head of the bim transport unit"
65C0 0E9E_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the cash unit transport pressure unit"
65C0 0E9F_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the cash unit transport motor retreat plate"
65C0 0EA0_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the cash unit transport junction magnet"
65C0 0EA1_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the cash unit transport cassette entry sensor"
65C0 0EA2_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the cash unit transport sensor"
65C0 0EA3_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the cash unit transport dispense unit"
65C0 0EA4_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the cash unit transport cassette 3"
65C0 0EA5_E 2 10 00000000 "CASHOUT RM3: Error state in safe of the cash unit transport junction"
65C0 0EA6_E 2 10 00000000 "CASHOUT RM3: Error state of the RM3 system"
65C0 0EA7_E 2 10 00000000 "CASHOUT RM3: Error state in cash unit transport of triple compartment magnet"
65C0 0FA0_E 2 10 00000000 "CASHOUT RM3: unknown configuration error"
65C0 1388_E 2 10 00000000 "CASHOUT RM3: logically unknown logical error"
65C0 1389_E 2 10 00000000 "CASHOUT RM3: logically no notes detected"
65C0 138A_E 2 10 00000000 "CASHOUT RM3: logical error: escrow full"
65C0 138B_E 2 10 00000000 "CASHOUT RM3: logical error: customer cash-in limit reached"
65C0 138C_E 2 10 00000000 "CASHOUT RM3: logical error: device cash-in capacity reached"
65C0 138D_E 2 10 00000000 "CASHOUT RM3: logical error: separation not possible from input tray"
65C0 138E_E 2 10 00000000 "CASHOUT RM3: logical error: foreign material detected"
65C0 138F_E 2 10 00000000 "CASHOUT RM3: logical error: notes inserted, short side first"
65C0 1390_E 2 10 00000000 "CASHOUT RM3: logical error: shutter blocked"
65C0 1391_E 2 08 00000000 "CASHOUT RM3: logical error: retract not possible because all retract destinations
full"
65C0 1393_E 2 04 00000000 "CASHOUT RM3: logical error: cassette 1 unexpectedly empty"
65C0 1394_E 2 04 00000000 "CASHOUT RM3: logical error: cassette 2 unexpectedly empty"
65C0 1395_E 2 04 00000000 "CASHOUT RM3: logical error: cassette 3 unexpectedly empty"
65C0 1396_E 2 04 00000000 "CASHOUT RM3: logical error: cassette 4 unexpectedly empty"
65C0 1397_E 2 04 00000000 "CASHOUT RM3: logical error: cassette 5 unexpectedly empty"
65C0 1398_E 2 04 00000000 "CASHOUT RM3: logical error: cassette 6 unexpectedly empty"
65C0 1399_E 2 04 00000000 "CASHOUT RM3: logical error: cassette 7 unexpectedly empty"
65C0 139A_E 2 04 00000000 "CASHOUT RM3: logical error: cassette 8 unexpectedly empty"
65C0 139D_E 2 04 00000000 "CASHOUT RM3: logical error: roller 1 unexpectedly empty"
65C0 139E_E 2 04 00000000 "CASHOUT RM3: logical error: roller 2 unexpectedly empty"
65C0 139F_E 2 04 00000000 "CASHOUT RM3: logical error: roller 3 unexpectedly empty"
65C0 13A0_E 2 04 00000000 "CASHOUT RM3: logical error: roller 4 unexpectedly empty"
65C0 13A1_E 2 04 00000000 "CASHOUT RM3: logical error: roller 5 unexpectedly empty"
65C0 13A2_E 2 04 00000000 "CASHOUT RM3: logical error: roller 6 unexpectedly empty"
65C0 13A3_E 2 04 00000000 "CASHOUT RM3: logical error: roller 7 unexpectedly empty"
65C0 13A4_E 2 04 00000000 "CASHOUT RM3: logical error: roller 8 unexpectedly empty"
65C0 13A5_E 2 10 00000000 "CASHOUT RM3: logical error: replenish unit 1 unexpected"
65C0 13A7_E 2 02 00000000 "CASHOUT RM3: logical error: too many rejects from cassette 1"
65C0 13A8_E 2 02 00000000 "CASHOUT RM3: logical error: too many rejects from cassette 2"
65C0 13A9_E 2 02 00000000 "CASHOUT RM3: logical error: too many rejects from cassette 3"
65C0 13AA_E 2 02 00000000 "CASHOUT RM3: logical error: too many rejects from cassette 4"
65C0 13AB_E 2 02 00000000 "CASHOUT RM3: logical error: too many rejects from cassette 5"
65C0 13AC_E 2 02 00000000 "CASHOUT RM3: logical error: too many rejects from cassette 6"
65C0 13AD_E 2 02 00000000 "CASHOUT RM3: logical error: too many rejects from cassette 7"
65C0 13AE_E 2 02 00000000 "CASHOUT RM3: logical error: too many rejects from cassette 8"
65C0 13B1_E 2 02 00000000 "CASHOUT RM3: logical error: too many rejects from roller 1"
65C0 13B2_E 2 02 00000000 "CASHOUT RM3: logical error: too many rejects from roller 2"
65C0 13B3_E 2 02 00000000 "CASHOUT RM3: logical error: too many rejects from roller 3"

U25604-J-Z745-1-7600 May 2011 177

CSC-W32 Error Classes M-Status & M-Data Reference Tables

65C0 13B4_E 2 02 00000000 "CASHOUT RM3: logical error: too many rejects from roller 4"
65C0 13B5_E 2 02 00000000 "CASHOUT RM3: logical error: too many rejects from roller 5"
65C0 13B6_E 2 02 00000000 "CASHOUT RM3: logical error: too many rejects from roller 6"
65C0 13B7_E 2 02 00000000 "CASHOUT RM3: logical error: too many rejects from roller 7"
65C0 13B8_E 2 02 00000000 "CASHOUT RM3: logical error: too many rejects from roller 8"
65C0 13BB_E 2 03 00000000 "CASHOUT RM3: logical error: unexpected note from cassette 1"
65C0 13BC_E 2 03 00000000 "CASHOUT RM3: logical error: unexpected note from cassette 2"
65C0 13BD_E 2 03 00000000 "CASHOUT RM3: logical error: unexpected note from cassette 3"
65C0 13BE_E 2 03 00000000 "CASHOUT RM3: logical error: unexpected note from cassette 4"
65C0 13BF_E 2 03 00000000 "CASHOUT RM3: logical error: unexpected note from cassette 5"
65C0 13C0_E 2 03 00000000 "CASHOUT RM3: logical error: unexpected note from cassette 6"
65C0 13C1_E 2 03 00000000 "CASHOUT RM3: logical error: unexpected note from cassette 7"
65C0 13C2_E 2 03 00000000 "CASHOUT RM3: logical error: unexpected note from cassette 8"
65C0 13C5_E 2 03 00000000 "CASHOUT RM3: logical error: unexpected note from roller 1"
65C0 13C6_E 2 03 00000000 "CASHOUT RM3: logical error: unexpected note from roller 2"
65C0 13C7_E 2 03 00000000 "CASHOUT RM3: logical error: unexpected note from roller 3"
65C0 13C8_E 2 03 00000000 "CASHOUT RM3: logical error: unexpected note from roller 4"
65C0 13C9_E 2 03 00000000 "CASHOUT RM3: logical error: unexpected note from roller 5"
65C0 13CA_E 2 03 00000000 "CASHOUT RM3: logical error: unexpected note from roller 6"
65C0 13CB_E 2 03 00000000 "CASHOUT RM3: logical error: unexpected note from roller 7"
65C0 13CC_E 2 03 00000000 "CASHOUT RM3: logical error: unexpected note from roller 8"
65C0 13CF_E 2 03 00000000 "CASHOUT RM3: logical error: inseparable items in cassette 1"
65C0 13D0_E 2 03 00000000 "CASHOUT RM3: logical error: inseparable items in cassette 2"
65C0 13D1_E 2 03 00000000 "CASHOUT RM3: logical error: inseparable items in cassette 3"
65C0 13D2_E 2 03 00000000 "CASHOUT RM3: logical error: inseparable items in cassette 4"
65C0 13D3_E 2 03 00000000 "CASHOUT RM3: logical error: inseparable items in cassette 5"
65C0 13D4_E 2 03 00000000 "CASHOUT RM3: logical error: inseparable items in cassette 6"
65C0 13D5_E 2 03 00000000 "CASHOUT RM3: logical error: inseparable items in cassette 7"
65C0 13D6_E 2 03 00000000 "CASHOUT RM3: logical error: inseparable items in cassette 8"
65C0 13D9_E 2 03 00000000 "CASHOUT RM3: logical error: inseparable items in roller 1"
65C0 13DA_E 2 03 00000000 "CASHOUT RM3: logical error: inseparable items in roller 2"
65C0 13DB_E 2 03 00000000 "CASHOUT RM3: logical error: inseparable items in roller 3"
65C0 13DC_E 2 03 00000000 "CASHOUT RM3: logical error: inseparable items in roller 4"
65C0 13DD_E 2 03 00000000 "CASHOUT RM3: logical error: inseparable items in roller 5"
65C0 13DE_E 2 03 00000000 "CASHOUT RM3: logical error: inseparable items in roller 6"
65C0 13DF_E 2 03 00000000 "CASHOUT RM3: logical error: inseparable items in roller 7"
65C0 13E0_E 2 03 00000000 "CASHOUT RM3: logical error: inseparable items in roller 8"
65C0 13E1_E 2 10 00000000 "CASHOUT RM3: logical error: the needed destination ran full"
65C0 13E2_E 2 10 00000000 "CASHOUT RM3: logical error: replenish unit is needed but missing"
65C0 13E3_E 2 10 00000000 "CASHOUT RM3: logical error: inserted bundle is too long"
65C0 13E4_E 2 10 00000000 "CASHOUT RM3: logical error: inserted bundle is too thick"

178 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

RM3 (CINEO series) errors (Class: 65C0_CIN)

The following table lists the CashIn M-Status and M-Data codes assigned to the
recycling module RM3 used in Wincor Nixdorf Cineo systems.

Table 45: RM3 (Cineo series) errors (class: 65c0_CIN)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
65C0 DEFA_E 2 99 65C0DEFA00000000000000 "CASHIN RM3: DEFAULT_ERROR"
65C0 DEFA_W 2 99 65C0DEFA00000000000000 "CASHIN RM3: DEFAULT_WARNING"
65C0 0001_E 2 99 65C0000100000000000000 "CASHIN RM3: Unknown general error"
65C0 03E8_E 2 99 65C003E800000000000000 "CASHIN RM3: Unknown IO error"
65C0 03E9_E 2 99 65C003E900000000000000 "CASHIN RM3: Checksum error"
65C0 03EA_E 2 99 65C003EA00000000000000 "CASHIN RM3: Communication error"
65C0 03EB_E 2 99 65C003EB00000000000000 "CASHIN RM3: Unsupported function"
65C0 044C_E 2 99 65C0044C00000000000000 "CASHIN RM3: Unknown USB error"
65C0 044D_E 2 99 65C0044D00000000000000 "CASHIN RM3: USB error 1"
65C0 04B0_E 2 99 65C004B000000000000000 "CASHIN RM3: Unknown secure channel error"
65C0 04B1_E 2 99 65C004B100000000000000 "CASHIN RM3: Secure channel error 1"
65C0 04B2_E 2 99 65C004B200000000000000 "CASHIN RM3: Secure channel error 2"
65C0 04B3_E 2 99 65C004B300000000000000 "CASHIN RM3: Secure channel error 3"
65C0 04B4_E 2 99 65C004B400000000000000 "CASHIN RM3: Secure channel error 4"
65C0 04B5_E 2 99 65C004B500000000000000 "CASHIN RM3: Secure channel error 5"
65C0 04B6_E 2 99 65C004B600000000000000 "CASHIN RM3: Secure channel error 6"
65C0 04B7_E 2 99 65C004B700000000000000 "CASHIN RM3: Secure channel error 7"
65C0 04B8_E 2 99 65C004B800000000000000 "CASHIN RM3: Secure channel error 8"
65C0 04B9_E 2 99 65C004B900000000000000 "CASHIN RM3: Secure channel error 9"
65C0 04BA_E 2 99 65C004BA00000000000000 "CASHIN RM3: Secure channel error 10"
65C0 04BB_E 2 99 65C004BB00000000000000 "CASHIN RM3: Secure channel error 11"
65C0 04BC_E 2 99 65C004BC00000000000000 "CASHIN RM3: Secure channel error 12"
65C0 04BD_E 2 99 65C004BD00000000000000 "CASHIN RM3: Secure channel error 13"
65C0 07D0_E 2 99 65C007D000000000000000 "CASHIN RM3: Unknown context error"
65C0 09C4_E 2 99 65C009C400000000000000 "CASHIN RM3: CASHIN operating needed"
65C0 09C5_E 2 99 65C009C500000000000000 "CASHIN RM3: CASHIN configuration needed"
65C0 0A28_E 2 99 65C00A2800000000000000 "CASHIN RM3: CashIn operating needed"
65C0 0A29_E 2 99 65C00A2900000000000000 "CASHIN RM3: CashIn configuration needed"
65C0 0BB8_E 2 99 65C00BB800000000000000 "CASHIN RM3: Unknown hardware error"
65C0 0BB9_E 2 99 65C00BB900000000000000 "CASHIN RM3: Defect module fatal"
65C0 0BBA_E 2 99 65C00BBA00000000000000 "CASHIN RM3: Defect CRS collector blocked"
65C0 0BBB_E 2 99 65C00BBB00000000000000 "CASHIN RM3: Defect uncalibrated sensors"
65C0 0BBC_E 2 99 65C00BBC00000000000000 "CASHIN RM3: Defect manual device check needed"
65C0 0BBD_E 2 99 65C00BBD00000000000000 "CASHIN RM3: Defect CRS io unit note jam"
65C0 0BBE_E 2 99 65C00BBE00000000000000 "CASHIN RM3: Defect fatal motor overcurrent"
65C0 0C1C_E 2 99 65C00C1C00000000000000 "CASHIN RM3: Jam in the entry sensor head position of the
ESCROW"
65C0 0C1D_E 2 99 65C00C1D00000000000000 "CASHIN RM3: Jam in the entry sensor head position of the
single unit head"
65C0 0C1E_E 2 99 65C00C1E00000000000000 "CASHIN RM3: Jam in the dispense sensor head position of the
ATS input output unit's dispenser"
65C0 0C1F_E 2 99 65C00C1F00000000000000 "CASHIN RM3: Jam in the transport sensor head position of the
ATS input output unit's note detector"
65C0 0C20_E 2 99 65C00C2000000000000000 "CASHIN RM3: Jam in the entry sensor head position of the ATS
input output unit's output tray"
65C0 0C21_E 2 99 65C00C2100000000000000 "CASHIN RM3: Jam in the transport sensor head position of the
ATS input output unit's thickness sensor"
65C0 0C22_E 2 99 65C00C2200000000000000 "CASHIN RM3: Jam in the entry sensor head position of the
CRS input output unit's collector"
65C0 0C23_E 2 99 65C00C2300000000000000 "CASHIN RM3: Jam in the dispense Sensor head position of the
CRS input output unit's dispenser"
65C0 0C24_E 2 99 65C00C2400000000000000 "CASHIN RM3: Jam in the transport sensor head position of the
CRS input output unit's note detector"

U25604-J-Z745-1-7600 May 2011 179

CSC-W32 Error Classes M-Status & M-Data Reference Tables

65C0 0C25_E 2 99 65C00C2500000000000000 "CASHIN RM3: Jam in the transport sensor head position of the
thickness sensor in the CRS input output unit"
65C0 0C26_E 2 99 65C00C2600000000000000 "CASHIN RM3: Jam in the entry sensor head position of the
docking transport in the replenish unit"
65C0 0C27_E 2 99 65C00C2700000000000000 "CASHIN RM3: Jam in the docking transport head position Ps1"
65C0 0C28_E 2 99 65C00C2800000000000000 "CASHIN RM3: Jam in the docking transport head position Ps2"
65C0 0C29_E 2 99 65C00C2900000000000000 "CASHIN RM3: Jam in the docking transport head position Ps3"
65C0 0C2A_E 2 99 65C00C2A00000000000000 "CASHIN RM3: Jam in the head position of the front load
junction entry. "
65C0 0C2B_E 2 99 65C00C2B00000000000000 "CASHIN RM3: Jam in the head position of the front load safe
entry"
65C0 0C2C_E 2 99 65C00C2C00000000000000 "CASHIN RM3: Jam in the transport sensor head position of the
note detector in the input unit of the POS input output unit"
65C0 0C2D_E 2 99 65C00C2D00000000000000 "CASHIN RM3: Jam in the transport sensor head position of the
thickness sensor in the input unit of the POS input output unit"
65C0 0C2E_E 2 99 65C00C2E00000000000000 "CASHIN RM3: Jam in the entry sensor head position in the
output unit of the POS input output unit
jamPosition_head.posIoUnit.outputUnit.entrySensor"
65C0 0C2F_E 2 99 65C00C2F00000000000000 "CASHIN RM3: Jam in the rear load junction entry head
position"
65C0 0C30_E 2 99 65C00C3000000000000000 "CASHIN RM3: Jam in the rear load safe entry head position"
65C0 0C31_E 2 99 65C00C3100000000000000 "CASHIN RM3: Jam in the entry sensor head position in the
alignment unit of the transport unit"
65C0 0C32_E 2 99 65C00C3200000000000000 "CASHIN RM3: Jam in the exit sensor head position in the
alignment unit of the transport unit"
65C0 0C33_E 2 99 65C00C3300000000000000 "CASHIN RM3: Jam in the middle sensor head position in the
alignment unit of the transport unit"
65C0 0C34_E 2 99 65C00C3400000000000000 "CASHIN RM3: Jam in the transport unit head position Ps2"
65C0 0C35_E 2 99 65C00C3500000000000000 "CASHIN RM3: Jam in the transport unit head position Ps1"
65C0 0C36_E 2 99 65C00C3600000000000000 "CASHIN RM3: Jam in the transport unit head position Ps2"
65C0 0C37_E 2 99 65C00C3700000000000000 "CASHIN RM3: Jam in the transport unit head position Ps3"
65C0 0C38_E 2 99 65C00C3800000000000000 "CASHIN RM3: Jam in the entry sensor safe position in
ROLLER 1 of cash unit"
65C0 0C39_E 2 99 65C00C3900000000000000 "CASHIN RM3: Jam in the entry sensor safe position in
ROLLER 2 of cash unit"
65C0 0C3A_E 2 99 65C00C3A00000000000000 "CASHIN RM3: Jam in the entry sensor safe position in
ROLLER 3 of cash unit"
65C0 0C3B_E 2 99 65C00C3B00000000000000 "CASHIN RM3: Jam in the entry sensor safe position in
ROLLER 4 of cash unit"
65C0 0C3C_E 2 99 65C00C3C00000000000000 "CASHIN RM3: Jam in the entry sensor safe position in SINGLE
UNIT SAFE 1 of cash unit"
65C0 0C3D_E 2 99 65C00C3D00000000000000 "CASHIN RM3: Jam in the entry sensor safe position in SINGLE
UNIT SAFE 2 of cash unit"
65C0 0C3E_E 2 99 65C00C3E00000000000000 "CASHIN RM3: Jam in the lower sensor safe position of in the
cash unit transport ROLLER 1 of cash unit"
65C0 0C3F_E 2 99 65C00C3F00000000000000 "CASHIN RM3: Jam in the unit sensor safe position in the cash
unit transport ROLLER 1 of cash unit"
65C0 0C40_E 2 99 65C00C4000000000000000 "CASHIN RM3: Jam in the upper sensor safe position in the
cash unit transport ROLLER 1 of cash unit"
65C0 0C41_E 2 99 65C00C4100000000000000 "CASHIN RM3: Jam in the lower sensor safe position in the cash
unit transport ROLLER 2 of cash unit"
65C0 0C42_E 2 99 65C00C4200000000000000 "CASHIN RM3: Jam in the unit sensor safe position in the cash
unit transport ROLLER 2 of cash unit"
65C0 0C43_E 2 99 65C00C4300000000000000 "CASHIN RM3: Jam in the upper sensor safe position in the
cash unit transport ROLLER 2 of cash unit"
65C0 0C44_E 2 99 65C00C4400000000000000 "CASHIN RM3: Jam in the lower unit sensor safe position in the
cash unit transport ROLLER 3-ROLLER 4 of cash unit"
65C0 0C45_E 2 99 65C00C4500000000000000 "CASHIN RM3: Jam in the transport sensor safe position in the
cash unit transport ROLLER 3- ROLLER 4 of cash unit"
65C0 0C46_E 2 99 65C00C4600000000000000 "CASHIN RM3: Jam in the upper unit sensor safe position in the
cash unit transport ROLLER 3- ROLLER 4 of cash unit"
65C0 0C47_E 2 99 65C00C4700000000000000 "CASHIN RM3: Jam in the entry sensor safe position in cash unit
transport TRIPLE UNIT COMPARTMENT 1-3 of cash unit"
65C0 0C48_E 2 99 65C00C4800000000000000 "CASHIN RM3: Jam in the entry sensor safe position in
ROLLER 1 of cash unit"
65C0 0C49_E 2 99 65C00C4900000000000000 "CASHIN RM3: Jam in the entry sensor safe position in
ROLLER 2 of cash unit"
65C0 0C4A_E 2 99 65C00C4A00000000000000 "CASHIN RM3: Jam in the cassette entry sensor safe position in
the cash unit transport CASSETTE 1 of cash unit"
65C0 0C4B_E 2 99 65C00C4B00000000000000 "CASHIN RM3: Jam in the transport sensor safe position in the
cash unit transport CASSETTE 2 of cash unit"

180 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

65C0 0C4C_E 2 99 65C00C4C00000000000000 "CASHIN RM3: Jam in the cassette entry sensor safe position in
the cash unit transport cassette 2 of cash unit"
65C0 0C4D_E 2 99 65C00C4D00000000000000 "CASHIN RM3: Jam in the transport sensor safe position in the
cash unit transport CASSETTE 2 of cash unit"
65C0 0C4E_E 2 99 65C00C4E00000000000000 "CASHIN RM3: Jam in the cassette entry sensor safe position in
the cash unit transport CASSETTE 3 of cash unit"
65C0 0C4F_E 2 99 65C00C4F00000000000000 "CASHIN RM3: Jam in the transport sensor safe position in the
cash unit transport CASSETTE 3 of cash unit"
65C0 0C50_E 2 99 65C00C5000000000000000 "CASHIN RM3: Jam in the cassette entry sensor safe position in
the cash unit transport CASSETTE 4 of cash unit"
65C0 0C51_E 2 99 65C00C5100000000000000 "CASHIN RM3: Jam in the transport sensor safe position in the
cash unit transport CASSETTE 4 of cash unit"
65C0 0C52_E 2 99 65C00C5200000000000000 "CASHIN RM3: Jam in the cassette entry sensor safe position in
the cash unit transport CASSETTE 5 of cash unit"
65C0 0C53_E 2 99 65C00C5300000000000000 "CASHIN RM3: Jam in the transport sensor safe position in the
cash unit transport CASSETTE 5 of cash unit"
65C0 0C54_E 2 99 65C00C5400000000000000 "CASHIN RM3: Jam in the transport sensor 1 safe position in the
cash unit transport ROLLER 1 - ROLLER 2 of cash unit"
65C0 0C55_E 2 99 65C00C5500000000000000 "CASHIN RM3: Jam in the transport sensor 2 safe position in the
cash unit transport ROLLER 1 - ROLLER 2 of cash unit"
65C0 0C56_E 2 99 65C00C5600000000000000 "CASHIN RM3: Jam in the transport sensor 3 safe position in the
cash unit transport ROLLER 1 - ROLLER 2 of cash unit"
65C0 0C57_E 2 99 65C00C5700000000000000 "CASHIN RM3: Jam in the entry sensor safe position in
ROLLER 3 of cash unit"
65C0 0C58_E 2 99 65C00C5800000000000000 "CASHIN RM3: Jam in the entry sensor safe position in
ROLLER 4 of cash unit"
65C0 0C59_E 2 99 65C00C5900000000000000 "CASHIN RM3: Jam in the cassette entry sensor safe position in
cash unit transport cassette 1 of cash unit"
65C0 0C5A_E 2 99 65C00C5A00000000000000 "CASHIN RM3: Jam in the transport sensor safe position in cash
unit transport CASSETTE 1 of cash unit"
65C0 0C5B_E 2 99 65C00C5B00000000000000 "CASHIN RM3: Jam in the cassette entry sensor safe position in
cash unit transport CASSETTE 2 of cash unit"
65C0 0C5C_E 2 99 65C00C5C00000000000000 "CASHIN RM3: Jam in the transport sensor safe position in cash
unit transport CASSETTE 2 of cash unit"
65C0 0C5D_E 2 99 65C00C5D00000000000000 "CASHIN RM3: Jam in the transport sensor 1 safe position in the
cash unit transport ROLLER 3 - ROLLER 4 of cash unit"
65C0 0C5E_E 2 99 65C00C5E00000000000000 "CASHIN RM3: Jam in the transport sensor 2 safe position in the
cash unit transport ROLLER 3 - ROLLER 4 of cash unit"
65C0 0C5F_E 2 99 65C00C5F00000000000000 "CASHIN RM3: Jam in the transport sensor 3 safe position in the
cash unit transport ROLLER 3 - ROLLER 4 of cash unit"
65C0 0C60_E 2 99 65C00C6000000000000000 "CASHIN RM3: Jam in the transport sensor 4 safe position in the
cash unit transport ROLLER 3 - ROLLER 4 of cash unit"
65C0 0C61_E 2 99 65C00C6100000000000000 "CASHIN RM3: Jam in the cassette sensor safe position of the
distr. transport"
65C0 0C62_E 2 99 65C00C6200000000000000 "CASHIN RM3: Jam in the head sensor safe position of the distr.
transport"
65C0 0C63_E 2 99 65C00C6300000000000000 "CASHIN RM3: Jam in the transport sensor safe position in the
thickness sensor of the distr. transport"
65C0 0C64_E 2 99 65C00C6400000000000000 "CASHIN RM3: Jam in the cassette sensor safe position in the
distr. transport desk"
65C0 0C65_E 2 99 65C00C6500000000000000 "CASHIN RM3: Jam in the head sensor safe position in the distr.
transport deskC"
65C0 0C66_E 2 99 65C00C6600000000000000 "CASHIN RM3: Jam in the lower cassette sensor safe position
in the distr. transport deskC"
65C0 0C67_E 2 99 65C00C6700000000000000 "CASHIN RM3: Jam in the reel storage sensor safe position in
the distr. transport deskC"
65C0 0C68_E 2 99 65C00C6800000000000000 "CASHIN RM3: Jam in the transport sensor safe position in the
thickness sensor of the distr. transport deskC"
65C0 0C69_E 2 99 65C00C6900000000000000 "CASHIN RM3: Jam in the head CRS io unit collector"
65C0 0C6A_E 2 99 65C00C6A00000000000000 "CASHIN RM3: Jam in the cassette entry sensor in the safe"
65C0 0C6B_E 2 99 65C00C6B00000000000000 "CASHIN RM3: Jam in the transport sensor in the safe"
65C0 0CE4_E 2 99 65C00CE400000000000000 "CASHIN RM3: Open switch in head of ESCROW"
65C0 0CE5_E 2 99 65C00CE500000000000000 "CASHIN RM3: Open switch in head of the ATS input output
unit"
65C0 0CE6_E 2 99 65C00CE600000000000000 "CASHIN RM3: Open switch in head of the CRS input output
unit"
65C0 0CE7_E 2 99 65C00CE700000000000000 "CASHIN RM3: Open switch in head of the input unit of the POS
input output unit"
65C0 0CE8_E 2 99 65C00CE800000000000000 "CASHIN RM3: Open switch in head of the safety switch"
65C0 0CE9_E 2 99 65C00CE900000000000000 "CASHIN RM3: Open switch in head of the collector transport
open sensor of the transport unit"

U25604-J-Z745-1-7600 May 2011 181

CSC-W32 Error Classes M-Status & M-Data Reference Tables

65C0 0CEA_E 2 99 65C00CEA00000000000000 "CASHIN RM3: Open switch in head of the lower transport open
sensor of the transport unit"
65C0 0CEB_E 2 99 65C00CEB00000000000000 "CASHIN RM3: Open switch in head of the main transport open
sensor of the transport unit"
65C0 0CEC_E 2 99 65C00CEC00000000000000 "CASHIN RM3: Open switch in head of the unlock switch"
65C0 0CED_E 2 99 65C00CED00000000000000 "CASHIN RM3: Open switch in safe of the cash unit transport
ROLLER 1 of cash unit"
65C0 0CEE_E 2 99 65C00CEE00000000000000 "CASHIN RM3: Open switch in safe of the cash unit transport
ROLLER 2 of cash unit"
65C0 0CEF_E 2 99 65C00CEF00000000000000 "CASHIN RM3: Open switch in safe of the cash unit transport
ROLLER 3 - ROLLER 4 of cash unit"
65C0 0CF0_E 2 99 65C00CF000000000000000 "CASHIN RM3: Open Switch in safe of the cash unit transport
CASSETTE 1 of cash unit"
65C0 0CF1_E 2 99 65C00CF100000000000000 "CASHIN RM3: Open switch in safe of the cash unit transport
CASSETTE 2 of cash unit"
65C0 0CF2_E 2 99 65C00CF200000000000000 "CASHIN RM3: Open Switch in safe of the cash unit transport
CASSETTE 3 of cash unit"
65C0 0CF3_E 2 99 65C00CF300000000000000 "CASHIN RM3: Open switch in safe of the cash unit transport
CASSETTE 4 of cash unit"
65C0 0CF4_E 2 99 65C00CF400000000000000 "CASHIN RM3: Open switch in safe of the cash unit transport
CASSETTE 5 of cash unit"
65C0 0CF5_E 2 99 65C00CF500000000000000 "CASHIN RM3: Open switch in safe of the cash unit transport
CASSETTE 1 of cash unit"
65C0 0CF6_E 2 99 65C00CF600000000000000 "CASHIN RM3: Open switch in safe of the cash unit tranport
CASSETTE 2 of cash unit"
65C0 0CF7_E 2 99 65C00CF700000000000000 "CASHIN RM3: Open switch in safe of the cash unit transport
ROLLER 3 - ROLLER 4 of cash unit"
65C0 0CF8_E 2 99 65C00CF800000000000000 "CASHIN RM3: Open switch in safe of the transport open sensor
of the distr. transport"
65C0 0CF9_E 2 99 65C00CF900000000000000 "CASHIN RM3: Open switch in safe of the cover locked sensor
of the distr. transport deskC"
65C0 0CFA_E 2 99 65C00CFA00000000000000 "CASHIN RM3: Open switch in safe of the safety switch"
65C0 0CFB_E 2 99 65C00CFB00000000000000 "CASHIN RM3: Open switch in safe of the shadow door sensor"
65C0 0CFC_E 2 99 65C00CFC00000000000000 "CASHIN RM3: Open switch in safe of the unlock switch sensor
of the distr. transport deskC"
65C0 0CFD_E 2 99 65C00CFD00000000000000 "CASHIN RM3: Open switch in safe of the distr. transport locked
sensor of the distr. transport deskC"
65C0 0CFE_E 2 99 65C00CFE00000000000000 "CASHIN RM3: Open switch in head of the escrow transport
open sensor of the transport unit"
65C0 0CFF_E 2 99 65C00CFF00000000000000 "CASHIN RM3: Open switch in safe of the reject retract locked
sensor of the distr. transport"
65C0 0DAC_E 2 99 65C00DAC00000000000000 "CASHIN RM3: Error state in head of the ESCROW"
65C0 0DAD_E 2 99 65C00DAD00000000000000 "CASHIN RM3: Error state in head of the ESCROW's entry
sensor"
65C0 0DAE_E 2 99 65C00DAE00000000000000 "CASHIN RM3: Error state in head of the SINGLE UNIT HEAD"
65C0 0DAF_E 2 99 65C00DAF00000000000000 "CASHIN RM3: Error state in head of the entry sensor of the
SINGLE UNIT HEAD"
65C0 0DB0_E 2 99 65C00DB000000000000000 "CASHIN RM3: Error state in head of the ATS input output unit"
65C0 0DB1_E 2 99 65C00DB100000000000000 "CASHIN RM3: Error state in head of the clamp detector of the
ATS input output unit"
65C0 0DB2_E 2 99 65C00DB200000000000000 "CASHIN RM3: Error state in head of the dispenser of the ATS
input output unit"
65C0 0DB3_E 2 99 65C00DB300000000000000 "CASHIN RM3: Error state in head of the dispense sensor in the
dispenser of the ATS input output unit"
65C0 0DB4_E 2 99 65C00DB400000000000000 "CASHIN RM3: Error state in head of the dispense unit in the
dispenser of the ATS input output unit"
65C0 0DB5_E 2 99 65C00DB500000000000000 "CASHIN RM3: Error state in head of the input tray of the input
output unit"
65C0 0DB6_E 2 99 65C00DB600000000000000 "CASHIN RM3: Error state in head of the pressure unit in the
input tray of the ATS input output unit"
65C0 0DB7_E 2 99 65C00DB700000000000000 "CASHIN RM3: Error state in the note detector of the ATS input
output unit"
65C0 0DB8_E 2 99 65C00DB800000000000000 "CASHIN RM3: Error state in head of the transport sensor in the
note detector of the ATS input output unit"
65C0 0DB9_E 2 99 65C00DB900000000000000 "CASHIN RM3: Error state in head of the output tray of the ATS
input output unit"
65C0 0DBA_E 2 99 65C00DBA00000000000000 "CASHIN RM3: Error state in head of the entry sensor in the
output tray of the ATS input output unit"
65C0 0DBB_E 2 99 65C00DBB00000000000000 "CASHIN RM3: Error state in the thickness sensor of the ATS
input output unit"

182 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

65C0 0DBC_E 2 99 65C00DBC00000000000000 "CASHIN RM3: Error state in head of the transport sensor in the
thickness sensor of the ATS input output unit"
65C0 0DBD_E 2 99 65C00DBD00000000000000 "CASHIN RM3: Error state in head of the BIM"
65C0 0DBE_E 2 99 65C00DBE00000000000000 "CASHIN RM3: Error state in head of the CRS input output
module"
65C0 0DBF_E 2 99 65C00DBF00000000000000 "CASHIN RM3: Error state in head of the clamp detector of the
CRS input output module"
65C0 0DC0_E 2 99 65C00DC000000000000000 "CASHIN RM3: Error state in head of the collector of the CRS
input output unit"
65C0 0DC1_E 2 99 65C00DC100000000000000 "CASHIN RM3: Error state in head of the entry sensor in the
collector of the CRS input output module"
65C0 0DC2_E 2 99 65C00DC200000000000000 "CASHIN RM3: Error state in head of the limited stepper
wrapper in the collector of the CRS input output module"
65C0 0DC3_E 2 99 65C00DC300000000000000 "CASHIN RM3: Error state in head of the pressure unit in the
collector of the CRS input output unit"
65C0 0DC4_E 2 99 65C00DC400000000000000 "CASHIN RM3: Error state in head of the transport belt in the
collector of the CRS input output unit"
65C0 0DC5_E 2 99 65C00DC500000000000000 "CASHIN RM3: Error state in head of the dispenser of the CRS
input output unit"
65C0 0DC6_E 2 99 65C00DC600000000000000 "CASHIN RM3: Error state in head of the dispense sensor in the
dispenser of the CRS input output unit"
65C0 0DC7_E 2 99 65C00DC700000000000000 "CASHIN RM3: Error state in head of the dispense unit in the
dispenser of the CRS input output unit"
65C0 0DC8_E 2 99 65C00DC800000000000000 "CASHIN RM3: Error state in head of the note detector of the
CRS input output unit"
65C0 0DC9_E 2 99 65C00DC900000000000000 "CASHIN RM3: Error state in head of the transport sensor in the
note detector of the CRS input output unit"
65C0 0DCA_E 2 99 65C00DCA00000000000000 "CASHIN RM3: Error state in head of the thickness sensor of the
CRS input output unit"
65C0 0DCB_E 2 99 65C00DCB00000000000000 "CASHIN RM3: Error state in head of the transport sensor in the
thickness sensor of the CRS input output unit"
65C0 0DCC_E 2 99 65C00DCC00000000000000 "CASHIN RM3: Error state in head of the tray of the CRS input
output unit"
65C0 0DCD_E 2 99 65C00DCD00000000000000 "CASHIN RM3: Error state in head of the pressure unit in the tray
of the CRS input output unit"
65C0 0DCE_E 2 99 65C00DCE00000000000000 "CASHIN RM3: Error state in head of the docking transport"
65C0 0DCF_E 2 99 65C00DCF00000000000000 "CASHIN RM3: Error state in head of the REPLENISH UNIT in
the docking transport"
65C0 0DD0_E 2 99 65C00DD000000000000000 "CASHIN RM3: Error state in head of the entry sensor in the
REPLENISH UNIT of the docking transport"
65C0 0DD1_E 2 99 65C00DD100000000000000 "CASHIN RM3: Error state in head of the unlock magnet of the
docking transport"
65C0 0DD2_E 2 99 65C00DD200000000000000 "CASHIN RM3: Error state in head of the controlled magnet of
the unlock magnet of the docking transport"
65C0 0DD3_E 2 99 65C00DD300000000000000 "CASHIN RM3: Error state in head of the docking transport Ps1"
65C0 0DD4_E 2 99 65C00DD400000000000000 "CASHIN RM3: Error state in head of the docking transport Ps2"
65C0 0DD5_E 2 99 65C00DD500000000000000 "CASHIN RM3: Error state in head of the docking transport Ps3"
65C0 0DD6_E 2 99 65C00DD600000000000000 "CASHIN RM3: Error state in head of the front load junction
entry"
65C0 0DD7_E 2 99 65C00DD700000000000000 "CASHIN RM3: Error state in head of the front load safe entry"
65C0 0DD8_E 2 99 65C00DD800000000000000 "CASHIN RM3: Error state in head of the POS input output unit"
65C0 0DD9_E 2 99 65C00DD900000000000000 "CASHIN RM3: Error state in head of the input unit of the POS
input output unit"
65C0 0DDA_E 2 99 65C00DDA00000000000000 "CASHIN RM3: Error state in head of the clamp detector in the
in-output unit"
65C0 0DDB_E 2 99 65C00DDB00000000000000 "CASHIN RM3: Error state in head of the dispense unit in the in-
output unit"
65C0 0DDC_E 2 99 65C00DDC00000000000000 "CASHIN RM3: Error state in head of the input tray in the in-
output unit"
65C0 0DDD_E 2 99 65C00DDD00000000000000 "CASHIN RM3: Error state in head of the note detector in the in-
output unit"
65C0 0DDE_E 2 99 65C00DDE00000000000000 "CASHIN RM3: Error state in head of the transport sensor of the
note detector in the in-output unit"
65C0 0DDF_E 2 99 65C00DDF00000000000000 "CASHIN RM3: Error state in head of the pressure unit in the in-
output unit"
65C0 0DE0_E 2 99 65C00DE000000000000000 "CASHIN RM3: Error state in head of the thickness sensor in the
in-output unit"
65C0 0DE1_E 2 99 65C00DE100000000000000 "CASHIN RM3: Error state in head of the transport sensor of the
thickness sensor in the in-output unit"
65C0 0DE2_E 2 99 65C00DE200000000000000 "CASHIN RM3: Error state in head of the output unit"

U25604-J-Z745-1-7600 May 2011 183

CSC-W32 Error Classes M-Status & M-Data Reference Tables

65C0 0DE3_E 2 99 65C00DE300000000000000 "CASHIN RM3: Error state in head of the entry sensor in the
output unit"
65C0 0DE4_E 2 99 65C00DE400000000000000 "CASHIN RM3: Error state in head of the rear load junction
entry"
65C0 0DE5_E 2 99 65C00DE500000000000000 "CASHIN RM3: Error state in head of the rear load safe entry"
65C0 0DE6_E 2 99 65C00DE600000000000000 "CASHIN RM3: Error state in head of the reject junctions drive"
65C0 0DE7_E 2 99 65C00DE700000000000000 "CASHIN RM3: Error state in head of the transport unit"
65C0 0DE8_E 2 99 65C00DE800000000000000 "CASHIN RM3: Error state in head of the alignment unit of the
transport unit"
65C0 0DE9_E 2 99 65C00DE900000000000000 "CASHIN RM3: Error state in head of the entry sensor in the
alignment unit of the transport unit"
65C0 0DEA_E 2 99 65C00DEA00000000000000 "CASHIN RM3: Error state in the head of the exit sensor in the
alignment unit of the transport unit"
65C0 0DEB_E 2 99 65C00DEB00000000000000 "CASHIN RM3: Error state in head of the middle sensor in the
alignment unit of the transport unit"
65C0 0DEC_E 2 99 65C00DEC00000000000000 "CASHIN RM3: Error state in head of the cash in junction of the
transport unit"
65C0 0DED_E 2 99 65C00DED00000000000000 "CASHIN RM3: Error state in head of the cash in junction
magnet in the transport unit"
65C0 0DEE_E 2 99 65C00DEE00000000000000 "CASHIN RM3: Error state in head of the collector junction of the
transport unit"
65C0 0DEF_E 2 99 65C00DEF00000000000000 "CASHIN RM3: Error state in head of the collector junction
magnet of the transport unit"
65C0 0DF0_E 2 99 65C00DF000000000000000 "CASHIN RM3: Error state in head of the docking unit junction of
the transport unit"
65C0 0DF1_E 2 99 65C00DF100000000000000 "CASHIN RM3: Error state in head of the docking unit junction
magnet of the transport unit"
65C0 0DF2_E 2 99 65C00DF200000000000000 "CASHIN RM3: Error state in head of the escrow junction of the
transport unit"
65C0 0DF3_E 2 99 65C00DF300000000000000 "CASHIN RM3: Error state in head of the escrow junction
magnet of the transport unit"
65C0 0DF4_E 2 99 65C00DF400000000000000 "CASHIN RM3: Error state in head of the head box junction of
the transport unit"
65C0 0DF5_E 2 99 65C00DF500000000000000 "CASHIN RM3: Error state in head of the head box junction
magnet of the transport unit"
65C0 0DF6_E 2 99 65C00DF600000000000000 "CASHIN RM3: Error state in head of the transport unit Ps1"
65C0 0DF7_E 2 99 65C00DF700000000000000 "CASHIN RM3: Error state in head of the transport unit Ps1"
65C0 0DF8_E 2 99 65C00DF800000000000000 "CASHIN RM3: Error state in head of the transport unit Ps2"
65C0 0DF9_E 2 99 65C00DF900000000000000 "CASHIN RM3: Error state in head of the transport unit Ps3"
65C0 0DFA_E 2 99 65C00DFA00000000000000 "CASHIN RM3: Error state in head of the unfit junction of the
transport unit"
65C0 0DFB_E 2 99 65C00DFB00000000000000 "CASHIN RM3: Error state in head of the unfit junction magnet
of the transport unit"
65C0 0DFC_E 2 99 65C00DFC00000000000000 "CASHIN RM3: Error state in safe of the cash unit string 1
ROLLER 1"
65C0 0DFD_E 2 99 65C00DFD00000000000000 "CASHIN RM3: Error state in safe of the entry sensor of the cash
unit string 1 ROLLER 1"
65C0 0DFE_E 2 99 65C00DFE00000000000000 "CASHIN RM3: Error state in safe of cash unit string 2 ROLLER
2"
65C0 0DFF_E 2 99 65C00DFF00000000000000 "CASHIN RM3: Error state in safe of the entry sensor of the cash
unit string 1 ROLLER 2"
65C0 0E00_E 2 99 65C00E0000000000000000 "CASHIN RM3: Error state in safe of cash unit string 1 ROLLER
3"
65C0 0E01_E 2 99 65C00E0100000000000000 "CASHIN RM3: Error state in safe of the entry sensor of the cash
unit string 1 ROLLER 3"
65C0 0E02_E 2 99 65C00E0200000000000000 "CASHIN RM3: Error state in safe of the cash unit string 1
ROLLER 4"
65C0 0E03_E 2 99 65C00E0300000000000000 "CASHIN RM3: Error state in safe of the entry sensor of the cash
unit string 1 ROLLER 4"
65C0 0E04_E 2 99 65C00E0400000000000000 "CASHIN RM3: Error state in safe of the SINGLE UNIT SAFE 1
of cash unit"
65C0 0E05_E 2 99 65C00E0500000000000000 "CASHIN RM3: Error state in safe of the entry sensor in the
SINGLE UNIT SAFE 1 of cash unit"
65C0 0E06_E 2 99 65C00E0600000000000000 "CASHIN RM3: Error state in safe of the SINGLE UNIT SAFE 2
of cash unit"
65C0 0E07_E 2 99 65C00E0700000000000000 "CASHIN RM3: Error state in safe of the entry sensor in the
SINGLE UNIT SAFE 2 of cash unit"
65C0 0E08_E 2 99 65C00E0800000000000000 "CASHIN RM3: Error state in safe of the TRIPLE UNIT
COMPARTMENT 1 of cash unit"
65C0 0E09_E 2 99 65C00E0900000000000000 "CASHIN RM3: Error state in safe of the TRIPLE UNIT
COMPARTMENT 2 of cash unit"

184 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

65C0 0E0A_E 2 99 65C00E0A00000000000000 "CASHIN RM3: Error state in safe of the TRIPLE UNIT
COMPARTMENT 3 of cash unit"
65C0 0E0B_E 2 99 65C00E0B00000000000000 "CASHIN RM3: ROLLER1 Error state in safe of ROLLER 1 in
the cash unit transport of cash unit"
65C0 0E0C_E 2 99 65C00E0C00000000000000 "CASHIN RM3: Error state in safe of the lower sensor of
ROLLER 1 in the cash unit transport of cash unit"
65C0 0E0D_E 2 99 65C00E0D00000000000000 "CASHIN RM3: Error state in safe of the stepper junction of
ROLLER 1 in the cash unit transport of cash unit"
65C0 0E0E_E 2 99 65C00E0E00000000000000 "CASHIN RM3: Error state in safe of the unit sensor of ROLLER
1 in the cash unit transport of cash unit"
65C0 0E0F_E 2 99 65C00E0F00000000000000 "CASHIN RM3: Error state in safe of the upper sensor of
ROLLER 1 in the cash unit transport of cash unit"
65C0 0E10_E 2 99 65C00E1000000000000000 "CASHIN RM3: Error state in safe of the ROLLER 2 in the cash
unit transport of cash unit"
65C0 0E11_E 2 99 65C00E1100000000000000 "CASHIN RM3: Error state in safe of the lower sensor of
ROLLER 2 in the cash unit transport of cash unit"
65C0 0E12_E 2 99 65C00E1200000000000000 "CASHIN RM3: Error state in safe of the stepper junction of
ROLLER 2 in teh cash unit transport of cash unit"
65C0 0E13_E 2 99 65C00E1300000000000000 "CASHIN RM3: Error state in safe of the unit sensor of ROLLER
2 of the cash unit transport of cash unit"
65C0 0E14_E 2 99 65C00E1400000000000000 "CASHIN RM3: Error state in safe of the upper sensor of
ROLLER 2 in the cash unit transport of cash unit"
65C0 0E15_E 2 99 65C00E1500000000000000 "CASHIN RM3: Error state in safe of ROLLER 3 - ROLLER 4 in
the cash unit transport of cash unit"
65C0 0E16_E 2 99 65C00E1600000000000000 "CASHIN RM3: Error state in safe of the junction of ROLLER 3
- ROLLER 4 in the cash unit transport of cash unit"
65C0 0E17_E 2 99 65C00E1700000000000000 "CASHIN RM3: Error state in safe of the lower unit sensor of
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E18_E 2 99 65C00E1800000000000000 "CASHIN RM3: Error state in safe of the magnet of ROLLER 3 -
ROLLER 4 in the cash unit transport of cash unit"
65C0 0E19_E 2 99 65C00E1900000000000000 "CASHIN RM3: Error state in safe of the transport sensor of
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E1A_E 2 99 65C00E1A00000000000000 "CASHIN RM3: Error state in safe of the upper unit sensor of
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E1B_E 2 99 65C00E1B00000000000000 "CASHIN RM3: Error state in safe of TRIPLE UNIT
COMPARTMENT 1 - TRIPLE UNIT COMPARTMENT 2 -
TRIPLE UNIT COMPARTMENT 3 in the cash unit transport of
cash unit"
65C0 0E1C_E 2 99 65C00E1C00000000000000 "CASHIN RM3: Error state in safe of the compartment 1 magnet
of TRIPLE UNIT COMPARTMENT 1 - TRIPLE UNIT
COMPARTMENT 2 - TRIPLE UNIT COMPARTMENT 3 in the
cash unit transport of cash unit"
65C0 0E1D_E 2 99 65C00E1D00000000000000 "CASHIN RM3: Error state in safe of the entry sensor of TRIPLE
UNIT COMPARTMENT 1 - TRIPLE UNIT COMPARTMENT 2 -
TRIPLE UNIT COMPARTMENT 3 in the cash unit transport of
cash unit"
65C0 0E1E_E 2 99 65C00E1E00000000000000 "CASHIN RM3: Error state in safe of CASSETTE 1 in cash unit"
65C0 0E1F_E 2 99 65C00E1F00000000000000 "CASHIN RM3: Error state in safe of CASSETTE 2 in cash unit"
65C0 0E20_E 2 99 65C00E2000000000000000 "CASHIN RM3: Error state in safe of CASSETTE 3 in cash unit"
65C0 0E21_E 2 99 65C00E2100000000000000 "CASHIN RM3: Error state in safe of CASSETTE 4 in cash unit"
65C0 0E22_E 2 99 65C00E2200000000000000 "CASHIN RM3: Error state in safe of CASSETTE 5 in cash unit"
65C0 0E23_E 2 99 65C00E2300000000000000 "CASHIN RM3: Error state in safe of ROLLER 1 in cash unit"
65C0 0E24_E 2 99 65C00E2400000000000000 "CASHIN RM3: Error state in safe of the entry sensor of
ROLLER 2 in cash unit"
65C0 0E25_E 2 99 65C00E2500000000000000 "CASHIN RM3: Error state in safe of ROLLER 2 in cash unit"
65C0 0E26_E 2 99 65C00E2600000000000000 "CASHIN RM3: Error state in safe of the entry sensor of
ROLLER 2 in cash unit"
65C0 0E27_E 2 99 65C00E2700000000000000 "CASHIN RM3: Error state in safe of CASSETTE 1 in the cash
unit transport of cash unit"
65C0 0E28_E 2 99 65C00E2800000000000000 "CASHIN RM3: Error state in safe of the cassette entry sensor
of CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E29_E 2 99 65C00E2900000000000000 "CASHIN RM3: Error state in safe of the DC motor retreat plate
of CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E2A_E 2 99 65C00E2A00000000000000 "CASHIN RM3: Error state in the dispense unit of CASSETTE 1
in the cash unit transport of cash unit"
65C0 0E2B_E 2 99 65C00E2B00000000000000 "CASHIN RM3: Error state in safe of the junction of CASSETTE
1 in the cash unit transport of cash unit"
65C0 0E2C_E 2 99 65C00E2C00000000000000 "CASHIN RM3: Error state in safe of the junction magnet of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E2D_E 2 99 65C00E2D00000000000000 "CASHIN RM3: Error state in safe of the paddle bottom of
CASSETTE 1 in the cash unit transport of cash unit"

U25604-J-Z745-1-7600 May 2011 185

CSC-W32 Error Classes M-Status & M-Data Reference Tables

65C0 0E2E_E 2 99 65C00E2E00000000000000 "CASHIN RM3: Error state in safe of the paddle top of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E2F_E 2 99 65C00E2F00000000000000 "CASHIN RM3: Error state in safe of the pressure unit of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E30_E 2 99 65C00E3000000000000000 "CASHIN RM3: Error State in safe of the transport sensor of
CASSETTE 2 in cash unit transport of cash unit"
65C0 0E31_E 2 99 65C00E3100000000000000 "CASHIN RM3: Error state in safe of CASSETTE 2 in the cash
unit transport of cash unit string 2"
65C0 0E32_E 2 99 65C00E3200000000000000 "CASHIN RM3: Error state in safe of the cassette entry sensor
of CASSETTE 2 in the cash unit transport of cash unit"
65C0 0E33_E 2 99 65C00E3300000000000000 "CASHIN RM3: Error state in safe of the DC motor retreat plate
of CASSETTE 2 in the cash unit transport of cash unit"
65C0 0E34_E 2 99 65C00E3400000000000000 "CASHIN RM3: Error state in safe of the dispense unit of
CASSETTE 2 in the cash unit transport of cash unit"
65C0 0E35_E 2 99 65C00E3500000000000000 "CASHIN RM3: Error state in safe of the junction of CASSETTE
2 in the cash unit transport of cash unit"
65C0 0E36_E 2 99 65C00E3600000000000000 "CASHIN RM3: Error state in safe of the junction magnet of
CASSETTE 2 in the cash unit transport of cash unit"
65C0 0E37_E 2 99 65C00E3700000000000000 "CASHIN RM3: Error state in safe of the paddle bottom of
CASSETTE 2 in teh cash unit transport of cash unit"
65C0 0E38_E 2 99 65C00E3800000000000000 "CASHIN RM3: Error state in safe of the paddle top of
CASSETTE 2 in the cash unit transport of cash unit"
65C0 0E39_E 2 99 65C00E3900000000000000 "CASHIN RM3: Error state in safe of the pressure unit of
CASSETTE 2 in the cash unit transport of cash unit"
65C0 0E3A_E 2 99 65C00E3A00000000000000 "CASHIN RM3: Error state in safe of the transport sensor of
CASSETTE 2 in the cash unit transport of cash unit"
65C0 0E3B_E 2 99 65C00E3B00000000000000 "CASHIN RM3: Error state in safe of CASSETTE 3 in the cash
unit transport of cash unit"
65C0 0E3C_E 2 99 65C00E3C00000000000000 "CASHIN RM3: Error state in safe of the cassette entry sensor
of CASSETTE 3 in the cash unit transport of cash unit"
65C0 0E3D_E 2 99 65C00E3D00000000000000 "CASHIN RM3: Error state in safe of the DC motor retreat plate
of CASSETTE 3 in the cash unit transport of cash unit"
65C0 0E3E_E 2 99 65C00E3E00000000000000 "CASHIN RM3: Error state in safe of the dispense unit in
CASSETTE 3 in the cash unit transport of cash unit"
65C0 0E3F_E 2 99 65C00E3F00000000000000 "CASHIN RM3: Error state in safe of the junction of CASSETTE
3 in the cash unit transport of cash unit"
65C0 0E40_E 2 99 65C00E4000000000000000 "CASHIN RM3: Error state in safe of the junction magnet of
CASSETTE 3 in the cash unit transport of cash unit"
65C0 0E41_E 2 99 65C00E4100000000000000 "CASHIN RM3: Error state in safe of the paddle bottom of
CASSETTE 3 in the cash unit transport of cash unit"
65C0 0E42_E 2 99 65C00E4200000000000000 "CASHIN RM3: Error state in safe of the paddle top of
CASSETTE 3 in the cash unit transport of cash unit"
65C0 0E43_E 2 99 65C00E4300000000000000 "CASHIN RM3: Error state in safe of the pressure unit of
CASSETTE 3 in the cash unit transport of cash unit"
65C0 0E44_E 2 99 65C00E4400000000000000 "CASHIN RM3: Error state in safe of the transport sensor of
CASSETTE 3 in the cash unit transport of cash unit"
65C0 0E45_E 2 99 65C00E4500000000000000 "CASHIN RM3: Error state in safe of CASSETTE 4 in the cash
unit transport of cash unit"
65C0 0E46_E 2 99 65C00E4600000000000000 "CASHIN RM3: Error state in safe of the cassette entry sensor
of CASSETTE 4 of the cash unit transport in cash unit"
65C0 0E47_E 2 99 65C00E4700000000000000 "CASHIN RM3: Error state in safe of the DC motor retreat plate
of CASSETTE 4 in the cash unit transport of cash unit"
65C0 0E48_E 2 99 65C00E4800000000000000 "CASHIN RM3: Error state in safe of the dispense unit of
CASSETTE 4 in the cash unit transport of cash unit"
65C0 0E49_E 2 99 65C00E4900000000000000 "CASHIN RM3: Error state in safe of the junction of CASSETTE
4 in the cash unit transport of cash unit"
65C0 0E4A_E 2 99 65C00E4A00000000000000 "CASHIN RM3: Error state in safe of the junction magnet of
CASSETTE 4 in the cash unit transport of cash unit"
65C0 0E4B_E 2 99 65C00E4B00000000000000 "CASHIN RM3: Error state in safe of the paddle bottom of
CASSETTE 4 in the cash unit transport of cash unit"
65C0 0E4C_E 2 99 65C00E4C00000000000000 "CASHIN RM3: Error state in safe of the paddle top of
CASSETTE 4 in the cash unit transport of cash unit"
65C0 0E4D_E 2 99 65C00E4D00000000000000 "CASHIN RM3: Error state in safe of the pressure unit of
CASSETTE 4 in the cash unit transport of cash unit"
65C0 0E4E_E 2 99 65C00E4E00000000000000 "CASHIN RM3: Error state in safe of the transport sensor of
CASSETTE 4 in the cash unit transport of cash unit"
65C0 0E4F_E 2 99 65C00E4F00000000000000 "CASHIN RM3: Error state in safe of CASSETTE 5 in the cash
unit transport of cash unit"
65C0 0E50_E 2 99 65C00E5000000000000000 "CASHIN RM3: Error state in safe of the cassette entry sensor
of CASSETTE 5 in the cash unit transport of cash unit"

186 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

65C0 0E51_E 2 99 65C00E5100000000000000 "CASHIN RM3: Error state in safe of the DC motor retreat plate
of CASSETTE 5 in the cash unit transport of cash unit "
65C0 0E52_E 2 99 65C00E5200000000000000 "CASHIN RM3: Error state in safe of the dispense unit of
CASSETTE 5 in the cash unit transport of cash unit"
65C0 0E53_E 2 99 65C00E5300000000000000 "CASHIN RM3: Error state in safe of the junction of CASSETTE
5 in the cash unit transport of cash unit"
65C0 0E54_E 2 99 65C00E5400000000000000 "CASHIN RM3: Error state in safe of the junction magnet of
CASSETTE 5 in the cash unit transport of cash unit"
65C0 0E55_E 2 99 65C00E5500000000000000 "CASHIN RM3: Error state in safe of the paddle bottom of
CASSETTE 5 in the cash unit transport of cash unit"
65C0 0E56_E 2 99 65C00E5600000000000000 "CASHIN RM3: Error state in safe of the paddle top of
CASSETTE 5 in the cash unit transport of cash unit"
65C0 0E57_E 2 99 65C00E5700000000000000 "CASHIN RM3: Error state in safe of the pressure unit of
CASSETTE 5 in the cash unit transport of cash unit"
65C0 0E58_E 2 99 65C00E5800000000000000 "CASHIN RM3: Error state in safe of the transport sensor of
CASSETTE 5 in the cash unit transport of cash unit"
65C0 0E59_E 2 99 65C00E5900000000000000 "CASHIN RM3: Error state in safe of ROLLER 1 - ROLLER 2 in
the cash unit transport of the cash unit string"
65C0 0E5A_E 2 99 65C00E5A00000000000000 "CASHIN RM3: Error state in safe of the junction magnet of
ROLLER 1 - ROLLER 2 in the cash unit transport of cash unit"
65C0 0E5B_E 2 99 65C00E5B00000000000000 "CASHIN RM3: Error state in safe of the transport sensor 1 of
ROLLER 1 - ROLLER 2 in the cash unit transport of cash unit"
65C0 0E5C_E 2 99 65C00E5C00000000000000 "CASHIN RM3: Error state in safe of the transport sensor 2 of
ROLLER 1 - ROLLER 2 in the cash unit transport of cash unit"
65C0 0E5D_E 2 99 65C00E5D00000000000000 "CASHIN RM3: Error state in safe of the transport sensor 3 of
ROLLER 1 - ROLLER 2 in the cash unit transport of cash unit"
65C0 0E5E_E 2 99 65C00E5E00000000000000 "CASHIN RM3: Error state in safe of the upper junction of
ROLLER 1 - ROLLER 2 in the cash unit transport of cash unit"
65C0 0E5F_E 2 99 65C00E5F00000000000000 "CASHIN RM3: Error state in safe of CASSETTE 1 in cash unit
string 3"
65C0 0E60_E 2 99 65C00E6000000000000000 "CASHIN RM3: Error state in safe of CASSETTE 2 in cash unit
string 3"
65C0 0E61_E 2 99 65C00E6100000000000000 "CASHIN RM3: Error state in safe of ROLLER 3 in cash unit 3"
65C0 0E62_E 2 99 65C00E6200000000000000 "CASHIN RM3: Error state in safe of the entry sensor of
ROLLER 3 in cash unit"
65C0 0E63_E 2 99 65C00E6300000000000000 "CASHIN RM3: Error state in safe of the ROLLER 4 if cash unit"
65C0 0E64_E 2 99 65C00E6400000000000000 "CASHIN RM3: Error state in safe of the entry sensor of
ROLLER 4 in cash unit"
65C0 0E65_E 2 99 65C00E6500000000000000 "CASHIN RM3: Error state in safe of CASSETTE 1 in the cash
unit transport of cash unit"
65C0 0E66_E 2 99 65C00E6600000000000000 "CASHIN RM3: Error state in safe of the cassette entry sensor
of CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E67_E 2 99 65C00E6700000000000000 "CASHIN RM3: Error state in safe of the DC motor retreat plate
of CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E68_E 2 99 65C00E6800000000000000 "CASHIN RM3: Error state in safe of the dispense unit of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E69_E 2 99 65C00E6900000000000000 "CASHIN RM3: Error state in safe of the junction of CASSETTE
1 in the cash unit transport of cash unit"
65C0 0E6A_E 2 99 65C00E6A00000000000000 "CASHIN RM3: Error state in safe of the junction magnet of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E6B_E 2 99 65C00E6B00000000000000 "CASHIN RM3: Error state in safe of the paddle bottom of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E6C_E 2 99 65C00E6C00000000000000 "CASHIN RM3: Error state in safe of the paddle top of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E6D_E 2 99 65C00E6D00000000000000 "CASHIN RM3: Error state in safe of the pressure unit of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E6E_E 2 99 65C00E6E00000000000000 "CASHIN RM3: Error state in safe of the transport sensor of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E6F_E 2 99 65C00E6F00000000000000 "CASHIN RM3: Error in state of CASSETTE 2 in the cash unit
transport of cash unit string 3"
65C0 0E70_E 2 99 65C00E7000000000000000 "CASHIN RM3: Error state in safe of the cassette entry sensor
of CASSETTE 2 in the cash unit transport of cash unit string 3"
65C0 0E71_E 2 99 65C00E7100000000000000 "CASHIN RM3: Error state in safe of the DC motor retreat plate
of CASSETTE 2 in the cash unit transport of cash unit string 3"
65C0 0E72_E 2 99 65C00E7200000000000000 "CASHIN RM3: Error state in safe of the dispense unit of
CASSETTE 2 in the cash unit transport of cash unit string 3"
65C0 0E73_E 2 99 65C00E7300000000000000 "CASHIN RM3: Error state in safe of the junction of CASSETTE
2 in the cash unit transport of cash unit string 3"
65C0 0E74_E 2 99 65C00E7400000000000000 "CASHIN RM3: Error state in safe of the junction magnet of
CASSETTE 2 in the cash unit transport of cash unit string 3"

U25604-J-Z745-1-7600 May 2011 187

CSC-W32 Error Classes M-Status & M-Data Reference Tables

65C0 0E75_E 2 99 65C00E7500000000000000 "CASHIN RM3: Error state in safe of the paddle bottom of
CASSETTE 2 in the cash unit transport of cash unit string 3"
65C0 0E76_E 2 99 65C00E7600000000000000 "CASHIN RM3: Error state in safe of the paddle top of
CASSETTE 2 in the cash unit transport of cash unit string 3"
65C0 0E77_E 2 99 65C00E7700000000000000 "CASHIN RM3: Error state in safe of the presssure unit of
CASSETTE 2 in the cash unit transport of cash unit string 3"
65C0 0E78_E 2 99 65C00E7800000000000000 "CASHIN RM3: Error state in safe of the transport sensor of
CASSETTE 2 in the cash unit transport of cash unit string 3"
65C0 0E79_E 2 99 65C00E7900000000000000 "CASHIN RM3: Error state in safe of ROLLER 3 - ROLLER 4 in
the cash unit transport of cash unit"
65C0 0E7A_E 2 99 65C00E7A00000000000000 "CASHIN RM3: Error state in safe of the lower junction of
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E7B_E 2 99 65C00E7B00000000000000 "CASHIN RM3: Error state in safe of the lower junction single
magnet of ROLLER 3 - ROLLER 4 in the cash unit transport of
cash unit"
65C0 0E7C_E 2 99 65C00E7C00000000000000 "CASHIN RM3: Error state in safe of the lower junction twin
magnet of ROLLER 3 - ROLLER 4 in the cash unit transport of
cash unit"
65C0 0E7D_E 2 99 65C00E7D00000000000000 "CASHIN RM3: Error state in safe of the transport sensor 1 of
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E7E_E 2 99 65C00E7E00000000000000 "CASHIN RM3: Error state in safe of the transport sensor 2 of
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E7F_E 2 99 65C00E7F00000000000000 "CASHIN RM3: Error state in safe of the transport sensor 3 of
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E80_E 2 99 65C00E8000000000000000 "CASHIN RM3: Error state in safe of the transport sensor of 4
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E81_E 2 99 65C00E8100000000000000 "CASHIN RM3: Error state in safe of the upper junction of
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E82_E 2 99 65C00E8200000000000000 "CASHIN RM3: Error state in safe of the upper junction single
magnet of ROLLER 3 - ROLLER 4 in the cash unit transport of
cash unit"
65C0 0E83_E 2 99 65C00E8300000000000000 "CASHIN RM3: Error in safe of the upper junction twin magnet
of ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E84_E 2 99 65C00E8400000000000000 "CASHIN RM3: Error state in safe of the distr. transport"
65C0 0E85_E 2 99 65C00E8500000000000000 "CASHIN RM3: Error state in safe of the cassette sensor if the
distr. transport"
65C0 0E86_E 2 99 65C00E8600000000000000 "CASHIN RM3: Error state in safe of the head sensor of the distr.
transport"
65C0 0E87_E 2 99 65C00E8700000000000000 "CASHIN RM3: Error state in safe of the reject junction magnet
of the distr. transport"
65C0 0E88_E 2 99 65C00E8800000000000000 "CASHIN RM3: Error state in safe of the retract junction magnet
in the distr. transport"
65C0 0E89_E 2 99 65C00E8900000000000000 "CASHIN RM3: Error state in safe of the thickness sensor of the
distr. transport"
65C0 0E8A_E 2 99 65C00E8A00000000000000 "CASHIN RM3: Error state in safe of the transport sensor in the
thickness sensor of the distr. transport"
65C0 0E8B_E 2 99 65C00E8B00000000000000 "CASHIN RM3: Error state in safe of the distr. transport deskC"
65C0 0E8C_E 2 99 65C00E8C00000000000000 "CASHIN RM3: Error state in safe of the cassette sensor of the
distr. transport deskC"
65C0 0E8D_E 2 99 65C00E8D00000000000000 "CASHIN RM3: Error state in safe of the head sensor of the distr.
transport deskC"
65C0 0E8E_E 2 99 65C00E8E00000000000000 "CASHIN RM3: Error state in safe of the lower box junction of the
distr. transport deskC"
65C0 0E8F_E 2 99 65C00E8F00000000000000 "CASHIN RM3: e Error state in safe of the lower box junction
magnet of the distr. transport deskC"
65C0 0E90_E 2 99 65C00E9000000000000000 "CASHIN RM3: Error state in safe of the lower cassette sensor
of the distr. transport deskC"
65C0 0E91_E 2 99 65C00E9100000000000000 "CASHIN RM3: Error state in safe of the reel storage sensor of
the distr. transport deskC"
65C0 0E92_E 2 99 65C00E9200000000000000 "CASHIN RM3: Error state in safe of the thickness sensor of the
distr. transport deskC"
65C0 0E93_E 2 99 65C00E9300000000000000 "CASHIN RM3: Error state in safe of the transport sensor in the
thickness sensor of the distr. transport deskC"
65C0 0E94_E 2 99 65C00E9400000000000000 "CASHIN RM3: Error state in safe of the the triple junction of the
distr. transport deskC"
65C0 0E95_E 2 99 65C00E9500000000000000 "CASHIN RM3: Error state in safe of the triple junction single
magnet of the distr. transport deskC"
65C0 0E96_E 2 99 65C00E9600000000000000 "CASHIN RM3: Error state in safe of the triple junction twin
magnet of the distr. transport deskC"
65C0 0E97_E 2 99 65C00E9700000000000000 "CASHIN RM3: Error state in safe of the upper box junction of
the distr. transport deskC"

188 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables CSC-W32 Error Classes

65C0 0E98_E 2 99 65C00E9800000000000000 "CASHIN RM3: Error state in safe of the upper box junction
magnet of the distr. transport deskC"
65C0 0E99_E 2 99 65C00E9900000000000000 "CASHIN RM3: Error state in safe of the generic distr. transport"
65C0 0E9A_E 2 99 65C00E9A00000000000000 "CASHIN RM3: Error state in safe of cassette 3"
65C0 0E9B_E 2 99 65C00E9B00000000000000 "CASHIN RM3: Error state in safe of the cash unit transport
paddle bottom"
65C0 0E9C_E 2 99 65C00E9C00000000000000 "CASHIN RM3: Error state in safe of the cash unit transport
paddle top"
65C0 0E9D_E 2 99 65C00E9D00000000000000 "CASHIN RM3: Error state in head of the bim transport unit"
65C0 0E9E_E 2 99 65C00E9E00000000000000 "CASHIN RM3: Error state in safe of the cash unit transport
pressure unit"
65C0 0E9F_E 2 99 65C00E9F00000000000000 "CASHIN RM3: Error state in safe of the cash unit transport
motor retreat plate"
65C0 0EA0_E 2 99 65C00EA000000000000000 "CASHIN RM3: Error state in safe of the cash unit transport
junction magnet"
65C0 0EA1_E 2 99 65C00EA100000000000000 "CASHIN RM3: Error state in safe of the cash unit transport
cassette entry sensor"
65C0 0EA2_E 2 99 65C00EA200000000000000 "CASHIN RM3: Error state in safe of the cash unit transport
sensor"
65C0 0EA3_E 2 99 65C00EA300000000000000 "CASHIN RM3: Error state in safe of the cash unit transport
dispense unit"
65C0 0EA4_E 2 99 65C00EA400000000000000 "CASHIN RM3: Error state in safe of the cash unit transport
cassette 3"
65C0 0EA5_E 2 99 65C00EA500000000000000 "CASHIN RM3: Error state in safe of the cash unit transport
junction"
65C0 0EA6_E 2 99 65C00EA600000000000000 "CASHIN RM3: Error state of the RM3 system"
65C0 0EA7_E 2 99 65C00EA700000000000000 "CASHIN RM3: Error state in cash unit transport of triple
compartment magnet"
65C0 0FA0_E 2 99 65C00FA000000000000000 "CASHIN RM3: unknown configuration error"
65C0 1388_E 2 99 65C0138800000000000000 "CASHIN RM3: logically unknown logical error"
65C0 1389_E 2 99 65C0138900000000000000 "CASHIN RM3: logically no notes detected"
65C0 138A_E 2 99 65C0138A00000000000000 "CASHIN RM3: logical error: escrow full"
65C0 138B_E 2 99 65C0138B00000000000000 "CASHIN RM3: logical error: customer cash-in limit reached"
65C0 138C_E 2 99 65C0138C00000000000000 "CASHIN RM3: logical error: device cash-in capacity reached"
65C0 138D_E 2 99 65C0138D00000000000000 "CASHIN RM3: logical error: separation not possible from input
tray"
65C0 138E_E 2 99 65C0138E00000000000000 "CASHIN RM3: logical error: foreign material detected"
65C0 138F_E 2 99 65C0138F00000000000000 "CASHIN RM3: logical error: notes inserted, short side first"
65C0 1390_E 2 99 65C0139000000000000000 "CASHIN RM3: logical error: shutter blocked"
65C0 1391_E 2 99 65C0139100000000000000 "CASHIN RM3: logical error: retract not possible because all
retract destinations full"
65C0 1393_E 2 99 65C0139300000000000000 "CASHIN RM3: logical error: cassette 1 unexpectedly empty"
65C0 1394_E 2 99 65C0139400000000000000 "CASHIN RM3: logical error: cassette 2 unexpectedly empty"
65C0 1395_E 2 99 65C0139500000000000000 "CASHIN RM3: logical error: cassette 3 unexpectedly empty"
65C0 1396_E 2 99 65C0139600000000000000 "CASHIN RM3: logical error: cassette 4 unexpectedly empty"
65C0 1397_E 2 99 65C0139700000000000000 "CASHIN RM3: logical error: cassette 5 unexpectedly empty"
65C0 1398_E 2 99 65C0139800000000000000 "CASHIN RM3: logical error: cassette 6 unexpectedly empty"
65C0 1399_E 2 99 65C0139900000000000000 "CASHIN RM3: logical error: cassette 7 unexpectedly empty"
65C0 139A_E 2 99 65C0139A00000000000000 "CASHIN RM3: logical error: cassette 8 unexpectedly empty"
65C0 139D_E 2 99 65C0139D00000000000000 "CASHIN RM3: logical error: roller 1 unexpectedly empty"
65C0 139E_E 2 99 65C0139E00000000000000 "CASHIN RM3: logical error: roller 2 unexpectedly empty"
65C0 139F_E 2 99 65C0139F00000000000000 "CASHIN RM3: logical error: roller 3 unexpectedly empty"
65C0 13A0_E 2 99 65C013A000000000000000 "CASHIN RM3: logical error: roller 4 unexpectedly empty"
65C0 13A1_E 2 99 65C013A100000000000000 "CASHIN RM3: logical error: roller 5 unexpectedly empty"
65C0 13A2_E 2 99 65C013A200000000000000 "CASHIN RM3: logical error: roller 6 unexpectedly empty"
65C0 13A3_E 2 99 65C013A300000000000000 "CASHIN RM3: logical error: roller 7 unexpectedly empty"
65C0 13A4_E 2 99 65C013A400000000000000 "CASHIN RM3: logical error: roller 8 unexpectedly empty"
65C0 13A5_E 2 99 65C013A500000000000000 "CASHIN RM3: logical error: replenish unit 1 unexpected"
65C0 13A7_E 2 99 65C013A700000000000000 "CASHIN RM3: logical error: too many rejects from cassette 1"
65C0 13A8_E 2 99 65C013A800000000000000 "CASHIN RM3: logical error: too many rejects from cassette 2"
65C0 13A9_E 2 99 65C013A900000000000000 "CASHIN RM3: logical error: too many rejects from cassette 3"
65C0 13AA_E 2 99 65C013AA00000000000000 "CASHIN RM3: logical error: too many rejects from cassette 4"
65C0 13AB_E 2 99 65C013AB00000000000000 "CASHIN RM3: logical error: too many rejects from cassette 5"
65C0 13AC_E 2 99 65C013AC00000000000000 "CASHIN RM3: logical error: too many rejects from cassette 6"
65C0 13AD_E 2 99 65C013AD00000000000000 "CASHIN RM3: logical error: too many rejects from cassette 7"
65C0 13AE_E 2 99 65C013AE00000000000000 "CASHIN RM3: logical error: too many rejects from cassette 8"
65C0 13B1_E 2 99 65C013B100000000000000 "CASHIN RM3: logical error: too many rejects from roller 1"

U25604-J-Z745-1-7600 May 2011 189

CSC-W32 Error Classes M-Status & M-Data Reference Tables

65C0 13B2_E 2 99 65C013B200000000000000 "CASHIN RM3: logical error: too many rejects from roller 2"
65C0 13B3_E 2 99 65C013B300000000000000 "CASHIN RM3: logical error: too many rejects from roller 3"
65C0 13B4_E 2 99 65C013B400000000000000 "CASHIN RM3: logical error: too many rejects from roller 4"
65C0 13B5_E 2 99 65C013B500000000000000 "CASHIN RM3: logical error: too many rejects from roller 5"
65C0 13B6_E 2 99 65C013B600000000000000 "CASHIN RM3: logical error: too many rejects from roller 6"
65C0 13B7_E 2 99 65C013B700000000000000 "CASHIN RM3: logical error: too many rejects from roller 7"
65C0 13B8_E 2 99 65C013B800000000000000 "CASHIN RM3: logical error: too many rejects from roller 8"
65C0 13BB_E 2 99 65C013BB00000000000000 "CASHIN RM3: logical error: unexpected note from cassette 1"
65C0 13BC_E 2 99 65C013BC00000000000000 "CASHIN RM3: logical error: unexpected note from cassette 2"
65C0 13BD_E 2 99 65C013BD00000000000000 "CASHIN RM3: logical error: unexpected note from cassette 3"
65C0 13BE_E 2 99 65C013BE00000000000000 "CASHIN RM3: logical error: unexpected note from cassette 4"
65C0 13BF_E 2 99 65C013BF00000000000000 "CASHIN RM3: logical error: unexpected note from cassette 5"
65C0 13C0_E 2 99 65C013C000000000000000 "CASHIN RM3: logical error: unexpected note from cassette 6"
65C0 13C1_E 2 99 65C013C100000000000000 "CASHIN RM3: logical error: unexpected note from cassette 7"
65C0 13C2_E 2 99 65C013C200000000000000 "CASHIN RM3: logical error: unexpected note from cassette 8"
65C0 13C5_E 2 99 65C013C500000000000000 "CASHIN RM3: logical error: unexpected note from roller 1"
65C0 13C6_E 2 99 65C013C600000000000000 "CASHIN RM3: logical error: unexpected note from roller 2"
65C0 13C7_E 2 99 65C013C700000000000000 "CASHIN RM3: logical error: unexpected note from roller 3"
65C0 13C8_E 2 99 65C013C800000000000000 "CASHIN RM3: logical error: unexpected note from roller 4"
65C0 13C9_E 2 99 65C013C900000000000000 "CASHIN RM3: logical error: unexpected note from roller 5"
65C0 13CA_E 2 99 65C013CA00000000000000 "CASHIN RM3: logical error: unexpected note from roller 6"
65C0 13CB_E 2 99 65C013CB00000000000000 "CASHIN RM3: logical error: unexpected note from roller 7"
65C0 13CC_E 2 99 65C013CC00000000000000 "CASHIN RM3: logical error: unexpected note from roller 8"
65C0 13CF_E 2 99 65C013CF00000000000000 "CASHIN RM3: logical error: inseparable items in cassette 1"
65C0 13D0_E 2 99 65C013D000000000000000 "CASHIN RM3: logical error: inseparable items in cassette 2"
65C0 13D1_E 2 99 65C013D100000000000000 "CASHIN RM3: logical error: inseparable items in cassette 3"
65C0 13D2_E 2 99 65C013D200000000000000 "CASHIN RM3: logical error: inseparable items in cassette 4"
65C0 13D3_E 2 99 65C013D300000000000000 "CASHIN RM3: logical error: inseparable items in cassette 5"
65C0 13D4_E 2 99 65C013D400000000000000 "CASHIN RM3: logical error: inseparable items in cassette 6"
65C0 13D5_E 2 99 65C013D500000000000000 "CASHIN RM3: logical error: inseparable items in cassette 7"
65C0 13D6_E 2 99 65C013D600000000000000 "CASHIN RM3: logical error: inseparable items in cassette 8"
65C0 13D9_E 2 99 65C013D900000000000000 "CASHIN RM3: logical error: inseparable items in roller 1"
65C0 13DA_E 2 99 65C013DA00000000000000 "CASHIN RM3: logical error: inseparable items in roller 2"
65C0 13DB_E 2 99 65C013DB00000000000000 "CASHIN RM3: logical error: inseparable items in roller 3"
65C0 13DC_E 2 99 65C013DC00000000000000 "CASHIN RM3: logical error: inseparable items in roller 4"
65C0 13DD_E 2 99 65C013DD00000000000000 "CASHIN RM3: logical error: inseparable items in roller 5"
65C0 13DE_E 2 99 65C013DE00000000000000 "CASHIN RM3: logical error: inseparable items in roller 6"
65C0 13DF_E 2 99 65C013DF00000000000000 "CASHIN RM3: logical error: inseparable items in roller 7"
65C0 13E0_E 2 99 65C013E000000000000000 "CASHIN RM3: logical error: inseparable items in roller 8"
65C0 13E1_E 2 99 65C013E100000000000000 "CASHIN RM3: logical error: the needed destination ran full"
65C0 13E2_E 2 99 65C013E200000000000000 "CASHIN RM3: logical error: replenish unit is needed but
missing"
65C0 13E3_E 2 99 65C013E300000000000000 "CASHIN RM3: logical error: inserted bundle is too long"
65C0 13E4_E 2 99 65C013E400000000000000 "CASHIN RM3: logical error: inserted bundle is too thick"

190 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference TablesApplication Error Classes (LYNX error

Application Error Classes (LYNX errors)

Transaction (Class: 6434)

Table 46: Transaction (Class: 6434)
Error Error Sev. M- M- Status desription
Class Code Status Data INFO
6434 0001_E 0 00 06000000 "LYNX TRX: Card was captured"
6434 0001_W 2 12 06000000 "LYNX TRX: Card was captured"
6434 0002_E 4 07 40000000 "LYNX TRX: Receipt printer not configured"
6434 0003_E 4 08 40000000 "LYNX TRX: Statement printer not configured"
6434 0004_E 2 00 0007000000000000 "LYNX TRX: Statement was retracted"
6434 0004_W 2 00 0007000000000000 "LYNX TRX: Statement was retracted"
6434 0005_W 4 08 0000000000000000000000 "LYNX TRX: Deposit general error"
6434 0006_E 2 00 0000000000000000000000 "LYNX TRX: Deposit was cancelled"
6434 0007_E 2 00 0000000000000000000000 "LYNX TRX: Deposit timeout"
6434 0008_E 4 00 0000000000000000000000 "LYNX TRX: Deposit not configured"
6434 0009_E 4 20 000000000000000000 "LYNX TRX: Cash dispenser not configured"
6434 000A_W 4 00 00000000 "LYNX TRX: Journal printer general error"
6434 000B_W 4 00 00000000 "LYNX TRX: Receipt printer general error"
6434 000C_W 4 00 00000000 "LYNX TRX: Document printer general error"
6434 000D_W 4 20 0000000000 "LYNX TRX: Card reader general HW error"
6434 000E_E 4 00 00000000 "LYNX TRX: Journal printer error, spooler active"
6434 000E_W 2 00 00000000 "LYNX TRX: Journal printer warning, spooler active"
6434 0010_E 2 00 00000000000000000000 "LYNX TRX: Money was retracted error"
6434 0010_W 2 00 00000000000000000000 "LYNX TRX: Money was retracted warning"
6434 0011_W 2 05 0000000000000000000000 "LYNX TRX: Deposit shutter not opened"
6434 0012_W 2 00 0001 "LYNX TRX: Panel Protection door problem"
6434 0013_W 2 14 00000000 "LYNX TRX: Card read threshold"
6434 0014_W 2 00 01000000000000000000 "LYNX TRX: Cassette low"
6434 0015_W 2 00 02000000 "LYNX TRX: Journal paper low, warning"
6434 0015_E 2 00 02000000 "LYNX TRX: Journal paper low, error"
6434 0016_W 2 00 02000000 "LYNX TRX: Receipt paper low"
6434 0017_W 2 00 0200000000000000 "LYNX TRX: Document paper low"
6434 0018_E 2 11 0400000000000000000 "LYNX TRX: Try to dispense with money in transport"
6434 0019_E 2 07 0000000000 "LYNX TRX: Card write attempt but no track data"
6434 001A_E 2 00 00000000000000000000 "LYNX TRX: Money was retracted in ADRS"
6434 001B_E 4 07 0800000000000000 "LYNX TRX: Document paper empty, documents not printed"
6434 001B_W 2 07 0800000000000000 "LYNX TRX: Document paper empty after successful print"
6434 0020_W 2 13 10000000000000000000 "LYNX TRX: CDM shutter error"
6434 0021_W 4 00 8000000000000000000000 "LYNX TRX: Deposit bin missing"
6434 0022_W 4 01 0000000000000000000000 "LYNX TRX: Deposit jam"
6434 0023_W 4 01 0000000000000000000000 "LYNX TRX: Deposit envelope jam"
6434 0024_W 4 11 0000000000000000000000 "LYNX TRX: Deposit no envelope"
6434 0025_W 4 08 0000000000000000000000 "LYNX TRX: Deposit printer failure"
6434 0026_W 2 01 0000000000000000000000 "LYNX TRX: Deposit envelope size"
6434 0027_W 2 04 0000000000000000000000 "LYNX TRX: Deposit shutter not close"
6434 0028_W 4 11 0000000000000000000000 "LYNX TRX: Deposit bin full"
6434 0028_E 4 11 0000000000000000000000 "LYNX TRX: Deposit bin full (ADRS)"
6434 0029_W 4 38 0600000000 "LYNX TRX: Card reader bin overfilled"
6434 002A_E 2 00 000000 "LYNX TRX: CAS - CDM: Consumer timeout in screen dialog 907"
6434 002B_E 2 00 000000 "LYNX TRX: CAS - CDM: Consumer has cancelled screen dialog
907"
6434 002C_E 2 00 0000000000000000000000 "LYNX TRX: CAS - DEP: Consumer timeout in screen dialog 906"
6434 002D_E 2 00 0000000000000000000000 "LYNX TRX: CAS - DEP: Consumer has cancelled screen dialog
906"
6434 002E_E 2 00 000000 "LYNX TRX: CAS - DOC: Consumer timeout in Screen dialog 909"
6434 002F_E 2 00 000000 "LYNX TRX: CAS - DOC: Consumer has cancelled screen dialog
909"

U25604-J-Z745-1-7600 May 2011 191

Application Error Classes (LYNX errors)M-Status & M-Data Reference Table

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
6434 0030_E 2 04 000000 "LYNX TRX: Envelope dispenser LOW"
6434 0031_E 4 06 000000 "LYNX TRX: Envelope dispenser EMPTY"
6434 0031_W 4 06 000000 "LYNX TRX: Envelope dispenser EMPTY"
6434 0032_W 2 02 000000 "LYNX TRX: Envelope dispenser error"
6434 0033_W 2 01 000000 "LYNX TRX: Envelope dispenser jam"
6434 0034_W 2 02 000000 "LYNX TRX: Envelope dispenser shutter not close"
6434 0035_W 2 05 000000 "LYNX TRX: Envelope dispenser shutter not open"
6434 0036_E 2 36 0007000000000000 "LYNX TRX: Statement capture bin full"
6434 0037_E 4 05 08000000 "LYNX TRX: Journal paper nearly empty, error"
6434 0037_W 2 05 08000000 "LYNX TRX: Journal paper nearly empty, warning"
6434 0038_E 2 05 40000800 "LYNX TRX: Receipt paper nearly empty"
6434 0039_E 2 12 00000000000000000000 "LYNX TRX: Shutter not close or money jam, dispense operation
declined"
6434 003A_E 3 13 00000000 "LYNX TRX: Card manipulation detected while waiting for card"
6434 003B_E 4 00 00000000 "LYNX TRX: Journal printer error, spooler active"
6434 003C_E 0 00 00000000 "LYNX TRX: Journal printer ok, reprint started"
6434 003D_E 0 00 00000000 "LYNX TRX: Journal printer ok, reprint finished"
6434 003E_E 4 00 00000000 "LYNX TRX: Journal printer error, spooler error"
6434 003F_E 4 07 00000000 "LYNX TRX: 5 consecutive PIN dialog errors, possible stuck key or
EDM error"
6434 0040_E 4 05 40000800 "LYNX TRX: Receipt paper jam or paper empty"
6434 0041_E 4 05 08000000 "LYNX TRX: Journal paper jam or paper empty"
6434 0042_E 2 12 06000000 "LYNX TRX: Card was captured after jam"
6434 0043_W 2 05 08000000 "LYNX TRX: Hard disk free space becomes low"
6434 0043_E 4 05 08000000 "LYNX TRX: No hard disk free space available"
6434 0044_E 2 02 00000000 "LYNX TRX: Card write attempted but track not installed"
6434 0045_E 2 04 00000000 "LYNX TRX: Card write command failed"
6434 0046_E 4 13 00000000 "LYNX TRX: Card trap active"
6434 0047_E 4 13 00000000 "LYNX TRX: Mouth piece vandalism"
6434 0048_E 4 13 00000000 "LYNX TRX: Card reader skimming active"
6434 0049_E 4 16 00000000 "LYNX TRX: Too many consecutive card jams"
6434 004A_E 2 12 00000000000000000000 "LYNX TRX: Shutter not close and cash tray not empty, dispense
operation declined"
6434 004B_E 2 12 00000000000000000000 "LYNX TRX: Shutter not close but cash tray, dispense operation
declined"
6434 004C_E 2 12 00000000000000000000 "LYNX TRX: Shutter closed but cash tray not empty, dispense
operation declined"
6434 004D_E 2 12 00000000000000000000 "LYNX TRX: Shutter not closed, cash tray empty, but transportway
not free, dispense operation declined"
6434 004E_E 4 12 00000000000000000000 "LYNX TRX: CDM shutter tampered, dispense operation declined"
6434 004F_E 0 05 06000000 "LYNX TRX: DIP card not taken"
6434 0050_E 2 00 00000000 "LYNX TRX: Coin Hopper low or out"
6434 0051_E 4 10 00000000 "LYNX TRX: Coin low not set"
6434 0052_E 2 03 00000000 "LYNX TRX: Coin Hopper out, no dispense attempted"
6434 0053_E 4 20 00000000 "LYNX TRX: Coin inoperative before dispense"
6434 0054_E 2 02 00000000 "LYNX TRX: Coin Hopper low, no dispense attempted"
6434 0055_E 2 08 00000000 "LYNX TRX: Coin error after good dispense"
6434 0056_E 2 04 00000000 "LYNX TRX: Coin dispense error, Hopper jam"
6434 0057_E 4 20 00000000 "LYNX TRX: Coin dispense error, FATAL"
6434 005D_E 4 02 00000000 "LYNX TRX: PIN pad not operational"
6434 005E_E 4 12 00000000000000000000 "LYNX TRX: CDM shutter tampered, money retracted"
6434 005F_E 4 07 00000000 "LYNX TRX: PIN pad tampered, transaction cancelled"
6434 0060_E 4 01 00000000 "LYNX TRX: Barcode Reader hardware error, FATAL"
6434 0061_E 2 01 00000000 "LYNX TRX: Barcode read timeout"
6434 0062_E 2 01 00000000 "LYNX TRX: Barcode read cancelled"
6434 0063_E 2 01 00000000 "LYNX TRX: Barcode read error"

192 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference TablesApplication Error Classes (LYNX error

Cash Dispenser (Class: 643A)

Table 47: Cash Dispenser (Class: 643A)
Error Error Sev. M- M- Status desription
Class Code Status Data INFO
643A DEFA_W 2 03 01100000000000000000 "LYNX CDM: Warning not found, use default entry"
643A DEFA_E 2 03 01100000000000000000 "LYNX CDM: Error not found, use default entry"
643A 0001_E 4 41 00004000000000000000 "LYNX CDM: Invalid cassette number"
643A 0002_E 2 04 00000303030300000000 "LYNX CDM: Try from empty or low cassette"
643A 0002_W 2 04 00000303030300000000 "LYNX CDM: Not dispenseable"
643A 0003_E 2 00 00000000000000000000 "LYNX CDM: Safe door open during dispense"
643A 0004_E 4 07 00000000000000000000 "LYNX CDM: Reject cassette not operational"
643A 0005_E 4 08 00000000000000000000 "LYNX CDM: Reject cassette full"
643A 0006_E 4 08 00000000000000000000 "LYNX CDM: Max retracts reached"
643A 0007_E 2 07 06000000000000000000 "LYNX CDM: Reject bin missing"
643A 0008_E 4 11 02000000000000000000 "LYNX CDM: Max present errors after dispense"
643A 0009_E 4 10 00000000000000000000 "LYNX CDM: Cash dispenser fatal"
643A 000B_E 2 05 01000300000000000000 "LYNX CDM: Partial/short dispense/present"
643A FEB5_W 2 00 00000000000000000000 "LYNX WOSA RTC: -331 (Order not allowed)"
643A FEB6_W 2 14 00000000000000000000 "LYNX WOSA RTC: -330 (Shutter not closed)"
643A FEC0_W 2 03 00000000000000000000 "LYNX WOSA RTC: -320 (Denomination error)"
643A FEC3_W 2 03 00000000000000000000 "LYNX WOSA RTC: -317 (No documents, no bills)"
643A FEC4_W 2 01 00000000000000000000 "LYNX WOSA RTC: -316 (Invalid cash unit)"
643A FEC5_W 2 14 00000000000000000000 "LYNX WOSA RTC: -315 (Shutter closed)"
643A FEC6_W 2 13 00000000000000000000 "LYNX WOSA RTC: -314 (Shutter open)"
643A FEC7_W 2 14 00000000000000000000 "LYNX WOSA RTC: -313 (Shutter not open)"
643A FEC8_W 2 34 00000000000000000000 "LYNX WOSA RTC: -312 (Invalid retract)"
643A FEC9_W 2 00 00000000000000000000 "LYNX WOSA RTC: -311 (Safe door open)"
643A FECA_W 2 03 00000000000000000000 "LYNX WOSA RTC: -310 (Position locked)"
643A FECB_W 2 03 00000000000000000000 "LYNX WOSA RTC: -309 (Invalid position)"
643A FECC_W 2 17 00000000000000000000 "LYNX WOSA RTC: -308 (Documents, bills left)"
643A FECD_W 2 03 00000000000000000000 "LYNX WOSA RTC: -307 (Too many documents)"
643A FECE_W 2 04 00000000000000000000 "LYNX WOSA RTC: -306 (Not dispensable)"
643A FECF_W 2 04 00000000000000000000 "LYNX WOSA RTC: -305 (No currency mix)"
643A FED0_W 2 04 00000000000000000000 "LYNX WOSA RTC: -304 (Invalid mix type)"
643A FED1_W 2 04 00000000000000000000 "LYNX WOSA RTC: -303 (Invalid denomination)"
643A FED2_W 2 03 00000000000000000000 "LYNX WOSA RTC: -302 (Cash unit error)"
643A FED3_W 2 03 00000000000000000000 "LYNX WOSA RTC: -301 (Invalid teller ID)"
643A FED4_W 2 01 00000000000000000000 "LYNX WOSA RTC: -300 (Invalid currency)"
643A FFD0_W 2 03 01100000000000000000 "LYNX WOSA RTC: -48 (Warning timeout)"
643A FFF2_W 2 12 01100000000000000000 "LYNX WOSA RTC: Hardware error, cannot dispense or deliver"
643A FFF3_W 2 12 01100000000000000000 "LYNX WOSA RTC: Hardware error, device not ready"
643A FFFF_W 2 12 01100000000000000000 "LYNX WOSA RTC: General error, device not ready"
643A FEB5_E 2 00 00000000000000000000 "LYNX WOSA RTC: -331 (Order not allowed)"
643A FEB6_E 2 14 00000000000000000000 "LYNX WOSA RTC: -330 (Shutter not closed)"
643A FEC0_E 2 03 00000000000000000000 "LYNX WOSA RTC: -320 (Denomination error)"
643A FEC3_E 2 03 00000000000000000000 "LYNX WOSA RTC: -317 (No documents, no bills)"
643A FEC4_E 2 01 00000000000000000000 "LYNX WOSA RTC: -316 (Invalid cash unit)"
643A FEC5_E 2 14 00000000000000000000 "LYNX WOSA RTC: -315 (Shutter closed)"
643A FEC6_E 2 13 00000000000000000000 "LYNX WOSA RTC: -314 (Shutter open)"
643A FEC7_E 2 14 00000000000000000000 "LYNX WOSA RTC: -313 (Shutter not open)"
643A FEC8_E 2 34 00000000000000000000 "LYNX WOSA RTC: -312 (Invalid retract)"
643A FEC9_E 2 00 00000000000000000000 "LYNX WOSA RTC: -311 (Safe door open)"
643A FECA_E 2 03 00000000000000000000 "LYNX WOSA RTC: -310 (Position locked)"
643A FECB_E 2 03 00000000000000000000 "LYNX WOSA RTC: -309 (Invalid position)"
643A FECC_E 2 17 00000000000000000000 "LYNX WOSA RTC: -308 (Documents, bills left)"
643A FECD_E 2 03 00000000000000000000 "LYNX WOSA RTC: -307 (Too many documents)"
643A FECE_E 2 04 00000000000000000000 "LYNX WOSA RTC: -306 (Not dispensable)"
643A FECF_E 2 04 00000000000000000000 "LYNX WOSA RTC: -305 (No currency mix)"
643A FED0_E 2 04 00000000000000000000 "LYNX WOSA RTC: -304 (Invalid mix type)"
643A FED1_E 2 04 00000000000000000000 "LYNX WOSA RTC: -303 (Invalid denomination)"

U25604-J-Z745-1-7600 May 2011 193

Application Error Classes (LYNX errors)M-Status & M-Data Reference Table

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
643A FED2_E 2 03 00000000000000000000 "LYNX WOSA RTC: -302 (Cash unit error)"
643A FED3_E 2 03 00000000000000000000 "LYNX WOSA RTC: -301 (Invalid teller ID)"
643A FED4_E 2 01 00000000000000000000 "LYNX WOSA RTC: -300 (Invalid currency)"
643A FFD0_E 2 03 01100000000000000000 "LYNX WOSA RTC: -48 (Error timeout)"
643A FFF2_E 2 12 01100000000000000000 "LYNX WOSA RTC: Hardware error, cannot dispense or deliver"
643A FFF3_E 2 12 01100000000000000000 "LYNX WOSA RTC: Hardware error, device not ready"
643A FFFF_E 2 12 01100000000000000000 "LYNX WOSA RTC: General error, device not ready"

Security Module (Class: 643C)

Table 48: Security Module (Class: 643C)
Error Error Sev. M- M- Status desription
Class Code Status Data INFO
643C 0001_E 4 38 00000000 "LYNX SEC: Set key error, possibly wrong keys"
643C 0002_E 2 70 00000000 "LYNX SEC: PIN check error, possibly wrong keys"
643C 0003_E 2 70 00000000 "LYNX SEC: Error while creating host PIN block"
643C 0004_E 2 38 00000000 "LYNX SEC: Error calculating MAC"
643C 0005_E 2 38 00000000 "LYNX SEC: Error initializing transaction"

CashIn transaction (Class: 6446)

Table 49: CashIn transaction (Class: 6446)
Error Error Sev. M- M- Status desription
Class Code Status Data INFO
6446 0001_E 4 01 6446000100000000000000 "LYNX CASHIN: CashIn not operational"
6446 0002_E 2 02 6446000200000000000000 "LYNX CASHIN: CashIn input shutter jam"
6446 0003_E 3 03 6446000300000000000000 "LYNX CASHIN: CashIn input tray jam"
6446 0004_E 4 04 6446000400000000000000 "LYNX CASHIN: CashIn input transport jam"
6446 0005_E 2 05 6446000500000000000000 "LYNX CASHIN: CashIn output shutter jam"
6446 0006_E 4 06 6446000600000000000000 "LYNX CASHIN: CashIn output tray jam"
6446 0007_E 4 07 6446000700000000000000 "LYNX CASHIN: CashIn output transport jam"
6446 0008_E 2 08 6446000800000000000000 "LYNX CASHIN: CashIn BIM not operational"
6446 0009_E 2 09 6446000900000000000000 "LYNX CASHIN: CashIn retracted"
6446 000A_E 4 10 6446000A00000000000000 "LYNX CASHIN: CashIn input stacker jam"
6446 000B_E 4 11 6446000B00000000000000 "LYNX CASHIN: CashIn output stacker jam"
6446 000C_E 2 13 6446000C00000000000000 "LYNX CASHIN: Hardware error on Drum 1"
6446 000D_E 2 14 6446000D00000000000000 "LYNX CASHIN: Hardware error on Drum 2"
6446 000E_E 2 15 6446000E00000000000000 "LYNX CASHIN: Hardware error on Drum 3"
6446 000F_E 2 16 6446000F00000000000000 "LYNX CASHIN: Hardware error on Drum 4"
6446 0010_E 4 17 6446001000000000000000 "LYNX CASHIN: Error storing notes in safe"
6446 0011_E 2 18 6446001100000000000000 "LYNX CASHIN: One CashIn box is now overfilled"
6446 0012_E 4 19 6446001200000000000000 "LYNX CASHIN: Retract or/and CashIn boxes are overfilled"
6446 0013_E 4 20 6446001300000000000000 "LYNX CASHIN: Foreign Items in CashIn tray detected"
6446 0014_E 2 21 6446001400000000000000 "LYNX CASHIN: CashIn reject bin full"
6446 0015_E 2 22 6446001500000000000000 "LYNX CASHIN: Security stripe sensor defective"
6446 0016_E 2 23 6446001600000000000000 "LYNX CASHIN: Foreign Items sensor defective"
6446 0017_E 2 24 6446001700000000000000 "LYNX CASHIN: Escrow empty"
6446 0018_E 2 25 6446001800000000000000 "LYNX CASHIN: Error TRX reply buffer"
6446 0019_E 2 26 6446001900000000000000 "LYNX CASHIN: Good Rollback, but L2 notes retracted"
6446 001A_E 2 27 6446001A00000000000000 "LYNX CASHIN: Rollback failed, all notes retracted"
6446 001B_E 2 28 6446001B00000000000000 "LYNX CASHIN: Good Cashin, but L2 notes retracted"
6446 001C_E 2 29 6446001C00000000000000 "LYNX CASHIN: Good Rollback, but all notes retracted after
consumer timeout"

194 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference TablesApplication Error Classes (LYNX error

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
6446 001D_E 2 30 6446001D00000000000000 "LYNX CASHIN: CashIn from host requested, but no cash on
escrow"
6446 001E_E 2 31 6446001E00000000000000 "LYNX CASHIN: Good Rollback, but L3 notes not returned"
6446 001F_E 2 32 6446001F00000000000000 "LYNX CASHIN: Good Rollback, but L2+L3 notes not returned"
6446 0020_E 2 33 6446002000000000000000 "LYNX CASHIN: Good Cashin, but L3 notes not returned"
6446 0021_E 2 34 6446002100000000000000 "LYNX CASHIN: Good Cashin, but L2+L3 notes not returned"
6446 0022_E 2 35 6446002200000000000000 "LYNX CASHIN: Roller failure, counter update in tran reply
suspected"
6446 0023_E 4 36 6446002300000000000000 "LYNX CASHIN: Maximum cash in retracts reached"
6446 0024_E 4 37 6446002400000000000000 "LYNX CASHIN: Too many consecutive failed cashin transac-
tions"
6446 0025_E 2 38 6446002500000000000000 "LYNX CASHIN: Fraud (Level 2) notes found"
6446 0026_E 4 39 6446002600000000000000 "LYNX CASHIN: NOTE_ID_LIST mismatch, identified cash
retracted"
6446 0027_E 2 40 6446002700000000000000 "LYNX CASHIN: CashIn TRX failed, max retries not reached yet"
6446 0028_E 2 42 6446002800000000000000 "LYNX CASHIN: Retract bin nearly full (high)"
6446 0040_E 2 41 6446004000000000000000 "LYNX CASHIN: CashIn retract attempted"
6446 0050_E 2 50 6446005000000000000000 "LYNX CASHIN: Coin in device not operational, check transport
ways"
6446 0051_E 2 51 6446005100000000000000 "LYNX CASHIN: Coin in rollback has failed, check transport
ways"
6446 0052_E 2 52 6446005200000000000000 "LYNX COININ: One CoinIn box is now overfilled"
6446 0053_E 2 53 6446005300000000000000 "LYNX COININ: CoinIn boxes are overfilled"
6446 0054_E 2 54 6446005400000000000000 "LYNX COININ: Error storing coins in safe"

WEB Dialog wrapper (Class: 6447)

Table 50: WEB Dialog wrapper (Class: 6447)
Error Error Sev. M- M- Status desription
Class Code Status Data INFO
6447 DEFA_E 0 00 000000000000000 "LYNX WEB: Error not found, use default entry"
0000000
6447 0001_E 0 01 000000000000000 "LYNX WEB: Online Page not found"
0000001
6447 0002_E 0 02 000000000000000 "LYNX WEB: Offline Page not found"
0000002
6447 0003_E 0 03 000000000000000 "LYNX WEB: CCDialog restarts"
0000003
6447 0004_E 0 04 000000000000000 "LYNX WEB: Memory exceeded configured limit"
0000004
6447 0005_E 0 05 000000000000000 "LYNX WEB: Start Surfing Mode"
0000005
6447 0006_E 0 06 000000000000000 "LYNX WEB: Stop Surfing Mode"
0000006
6447 0007_E 0 07 000000000000000 "LYNX WEB: Contents Control timeout"
0000007
6447 0008_E 0 08 000000000000000 "LYNX WEB: WEB Dialog hangs"
0000008

EMV transaction (Class: 6459)

Table 51: EMV transaction (Class: 6459)
Error Error Sev. M- M- Status desription
Class Code Status Data INFO
6459 0001_W 2 77 7000000000 "LYNX EMV: Chip contact threshold"

U25604-J-Z745-1-7600 May 2011 195

Application Error Classes (LYNX errors)M-Status & M-Data Reference Table

Cheque transaction (Class: 645A)

Table 52: Cheque transaction (Class: 645A)
Error Error Sev. M- M- Status desription
Class Code Status Data INFO
645A DEFA_E 2 01 645ADEFA "LYNX CHEQUE: Cheque device jammed"
645A 0001_E 2 01 645A0001 "LYNX CHEQUE: Cheque acception error"
645A 0002_E 2 02 645A0002 "LYNX CHEQUE: Error during cheques storing"
645A 0003_E 2 03 645A0003 "LYNX CHEQUE: Error during ejecting cheques"
645A 0004_E 2 04 645A0004 "LYNX CHEQUE: Present timeout, cheque will be captured"
645A 0005_E 2 05 645A0005 "LYNX CHEQUE: Retract error, cheque may be still in IO path"
645A 0006_E 4 06 645A0006 "LYNX CHEQUE: Retract bin full, no more cheques can be captured"
645A 0007_E 4 07 645A0007 "LYNX CHEQUE: Cheque flush error"
645A 0008_E 4 08 645A0008 "LYNX CHEQUE: Cheque device jammed"
645A 0009_E 2 09 645A0009 "LYNX CHEQUE: Cheque archiving failed, check path configuration"
645A 000A_E 2 10 645A000A "LYNX CHEQUE: Shutter jammed or blocked during MediaIn"
645A 000B_E 4 11 645A000B "LYNX CHEQUE: General hardware error of CCDM"
645A 000C_E 2 12 645A000C "LYNX CHEQUE: Safe door open, trx not allowed"
645A 000D_E 4 13 645A000D "LYNX CHEQUE: Acceptor stop, MediaIn not possible"
645A 000E_E 4 14 645A000E "LYNX CHEQUE: Lamp error, check Firewire connection"
645A 000F_E 2 15 645A000F "LYNX CHEQUE: Cheque(s) retracted"
645A 0010_E 4 16 645A0010 "LYNX CHEQUE: Print on Cheque failed, exchange toner and check
print head"
645A 0011_E 2 17 645A0011 "LYNX CHEQUE: Toner low, exchange toner soon"
645A 0012_E 4 18 645A0012 "LYNX CHEQUE: Toner empty, printing on cheques fail"
645A 0013_E 4 19 645A0013 "LYNX CHEQUE: Device not ready, cheque processing not possible"
645A 0014_E 2 20 645A0014 "LYNX CHEQUE: Cheque Cassette 1 full, no more cheques can be
stored in Cassette 1"
645A 0015_E 2 21 645A0015 "LYNX CHEQUE: Cheque Cassette 2 full, no more cheques can be
stored in Cassette 2"
645A 0016_E 4 22 645A0016 "LYNX CHEQUE: All Cheque Cassettes full, no more cheques can be
stored"
645A 0017_E 2 23 645A0017 "LYNX CHEQUE: Retract bin nearly full (high)"

Electronic Journal (Class: 0091)

Table 53: EMV transaction (Class: 0091)
Error Error Sev. M- M- Status desription
Class Code Status Data INFO
0091 DEFA_E 4 07 40000000 "E-JRN: E-Journal file could not be written"
0091 0001_E 4 07 40000000 "E-JRN: E-Journal file could not be written"
0091 0002_E 4 07 40000000 "E-JRN: E-Journal file could not be written"
0091 0003_E 4 07 40000000 "E-JRN: EJ/SAF-Journal file could not be written"

196 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables XFS 2.0 Error Classes

XFS 2.0 Error Classes

Cash Dispenser (Class: 00B9)

Table 54: XFS 2.0 Cash Dispenser (Class: 00B9)
Error Error Sev. M- M- Status desription
Class Code Status Data INFO
00B9 D010_E 4 09 00000000000000000000 "WOSA CDM/CRS: Firmware faulty, stopped"
00B9 D016_E 4 09 00000000000000000000 "WOSA CDM/CRS: Booter Firmware faulty, stopped"
00B9 D020_E 4 09 00000000000000000000 "WOSA CDM/CRS: V.24 line problem master <==> slave"
00B9 D025_E 4 09 00000000000000000000 "WOSA CDM/CRS: Slave controller without Firmware"
00B9 D100_E 4 09 00000000000000000000 "WOSA CDM/CRS: Safe controller faulty"
00B9 D101_E 4 09 00000000000000000000 "WOSA CDM/CRS: Safe controller no booter or faulty"
00B9 D105_E 4 09 00000000000000000000 "WOSA CDM/CRS: Counter controller faulty"
00B9 D106_E 4 09 00000000000000000000 "WOSA CDM/CRS: Counter controller no booter or faulty"
00B9 D110_E 4 09 00000000000000000000 "WOSA CDM/CRS: Firmware not loaded"
00B9 D120_E 2 09 00000000000000000000 "WOSA CDM/CRS: Safety switch of safe module open"
00B9 D125_E 2 09 00000000000000000000 "WOSA CDM/CRS: Safety switch of counter module open"
00B9 D135_E 4 10 00000000000000000000 "WOSA CDM/CRS: Device lock after retract & quit"
00B9 D136_E 4 10 00000000000000000000 "WOSA CDM/CRS: Device lock after jam in counter area"
00B9 D140_E 4 09 00000000000000000000 "WOSA CDM/CRS: Hardware requirements not ok"
00B9 D145_E 0 09 00000000000000000000 "WOSA CDM/CRS: Hardware requirements not ok"
00B9 D146_E 4 09 00000000000000000000 "WOSA CDM/CRS: Requirements for BIM missing"
00B9 D170_E 2 01 00000000000000000000 "WOSA CDM/CRS: Money jam during cash-in"
00
00B9 D171_E 2 01 00000000000000000000 "WOSA CDM/CRS: Money jam during cash-in"
00
00B9 D175_E 2 01 00000000000000000000 "WOSA CDM/CRS: Money jam during cash-in"
00
00B9 D176_E 2 01 00000000000000000000 "WOSA CDM/CRS: Money jam during cash-in"
00
00B9 D178_E 2 01 00000000000000000000 "WOSA CDM/CRS: Money jam during cash-in"
00
00B9 D179_E 2 01 00000000000000000000 "WOSA CDM/CRS: Money jam during cash-in"
00
00B9 D180_E 2 09 00000000000000000000 "WOSA CDM/CRS: Note jam in safe area cassettes"
00B9 D181_E 2 09 00000000000000000000 "WOSA CDM/CRS: Note jam in safe area roller"
00B9 D182_E 2 09 00000000000000000000 "WOSA CDM/CRS: Note jam in safe area cassettes"
00B9 D185_E 2 09 01100000000000000000 "WOSA CDM/CRS: Note jam in counter area (cash out tray)"
00B9 D186_E 2 09 00000000000000000000 "WOSA CDM/CRS: Note jam in counter area (cash out tray)"
00B9 D187_E 2 09 00000000000000000000 "WOSA CDM/CRS: Note jam in counter area (cash out tray)"
00B9 D200_E 2 09 00000000000000000000 "WOSA CDM/CRS: Switch in safe area faulty/blocked"
00B9 D201_E 2 09 00000000000000000000 "WOSA CDM/CRS: Switch in safe area faulty/blocked"
00B9 D202_E 2 09 00000000000000000000 "WOSA CDM/CRS: Switch in safe area faulty/blocked"
00B9 D203_E 2 09 00000000000000000000 "WOSA CDM/CRS: Switch in safe area faulty/blocked"
00B9 D204_E 2 09 00000000000000000000 "WOSA CDM/CRS: Switch in safe area faulty/blocked"
00B9 D205_E 2 09 00000000000000000000 "WOSA CDM/CRS: Switch in counter area faulty/blocked"
00B9 D206_E 2 09 00000000000000000000 "WOSA CDM/CRS: Switch in counter area faulty/blocked"
00B9 D207_E 2 09 00000000000000000000 "WOSA CDM/CRS: Switch in counter area faulty/blocked"
00B9 D210_E 2 09 00000000000000000000 "WOSA CDM/CRS: Measurement station in safe area faulty"
00B9 D214_E 4 05 00000000000000000000 "WOSA CDM/CRS: Tape sensor in BIM module reports error"
00B9 D215_E 2 09 00000000000000000000 "WOSA CDM/CRS: Measurement station in counter area faulty"
00B9 D216_E 2 09 00000000000000000000 "WOSA CDM/CRS: BIM reader line faulty"
00B9 D217_E 2 09 00000000000000000000 "WOSA CDM/CRS: BIM communication faulty"
00B9 D218_E 2 09 00000000000000000000 "WOSA CDM/CRS: BIM note signals missing/inacceptable"
00B9 D219_E 2 09 00000000000000000000 "WOSA CDM/CRS: BIM returns error in call response"
00B9 D220_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor intensifier faulty"
00B9 D230_E 2 09 00000000000000000000 "WOSA CDM/CRS: Switch in safe area faulty / blocked"
00B9 D231_E 2 09 00000000000000000000 "WOSA CDM/CRS: Switch in safe area faulty / blocked"
00B9 D232_E 2 09 00000000000000000000 "WOSA CDM/CRS: Switch in safe area faulty / blocked"

U25604-J-Z745-1-7600 May 2011 197

XFS 2.0 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
00B9 D250_E 2 09 00000000000000000000 "WOSA CDM/CRS: Transport motor in safe area faulty"
00B9 D255_E 2 09 00000000000000000000 "WOSA CDM/CRS: Transport motor in safe area faulty"
00B9 D256_E 2 09 00000000000000000000 "WOSA CDM/CRS: Transport motor in safe area faulty"
00B9 D285_E 2 09 00000000000000000000 "WOSA CDM/CRS: Error during cash out tray handling"
00B9 D286_E 2 09 00000000000000000000 "WOSA CDM/CRS: Error during filling tray handling"
00B9 D287_E 2 09 00000000000000000000 "WOSA CDM/CRS: Error during cash out tray handling"
00B9 D295_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor of cash out tray covered"
00B9 D296_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor of filling tray covered"
00B9 D310_E 2 09 00000000000000000000 "WOSA CDM/CRS: Too many bundle reject cassette 1"
00B9 D320_E 2 09 00000000000000000000 "WOSA CDM/CRS: Too many bundle reject cassette 2"
00B9 D330_E 2 09 00000000000000000000 "WOSA CDM/CRS: Too many bundle reject cassette 3"
00B9 D340_E 2 09 00000000000000000000 "WOSA CDM/CRS: Too many bundle reject cassette 4"
00B9 D405_E 2 09 00000000000000000000 "WOSA CDM/CRS: No separation possible"
00B9 D406_E 4 09 00000000000000000000 "WOSA CDM/CRS: No separation possible"
00B9 D407_E 2 09 00000000000000000000 "WOSA CDM/CRS: Metal in input tray detected"
00B9 D408_E 2 09 00000000000000000000 "WOSA CDM/CRS: Security stripe sensor defect"
00B9 D410_E 2 09 00000000000000000000 "WOSA CDM/CRS: No separation possible"
00B9 D411_E 2 09 00000000000000000000 "WOSA CDM/CRS: No separation possible"
00B9 D420_E 2 09 00000000000000000000 "WOSA CDM/CRS: No separation possible"
00B9 D421_E 2 09 00000000000000000000 "WOSA CDM/CRS: No separation possible"
00B9 D430_E 2 09 00000000000000000000 "WOSA CDM/CRS: No separation possible"
00B9 D431_E 2 09 00000000000000000000 "WOSA CDM/CRS: No separation possible"
00B9 D440_E 2 09 00000000000000000000 "WOSA CDM/CRS: No separation possible"
00B9 D441_E 2 09 00000000000000000000 "WOSA CDM/CRS: No separation possible"
00B9 D451_E 2 09 00000000000000000000 "WOSA CDM/CRS: No separation possible"
00B9 D461_E 2 09 00000000000000000000 "WOSA CDM/CRS: No separation possible"
00B9 D510_E 2 09 00000000000000000000 "WOSA CDM/CRS: Too many bad bills cassette 1"
00B9 D520_E 2 09 00000000000000000000 "WOSA CDM/CRS: Too many bad bills cassette 2"
00B9 D530_E 2 09 00000000000000000000 "WOSA CDM/CRS: Too many bad bills cassette 3"
00B9 D540_E 2 09 00000000000000000000 "WOSA CDM/CRS: Too many bad bills cassette 4"
00B9 D605_E 2 09 00000000000000000000 "WOSA CDM/CRS: ESCROW faulty (no signals)"
00B9 D610_E 2 09 00000000000000000000 "WOSA CDM/CRS: Cassette 1 faulty, write error"
00B9 D611_E 2 09 00000000000000000000 "WOSA CDM/CRS: Roller 1 or switch faulty"
00B9 D620_E 2 09 00000000000000000000 "WOSA CDM/CRS: Cassette 2 faulty, write error"
00B9 D621_E 2 09 00000000000000000000 "WOSA CDM/CRS: Roller 2 oder switch faulty"
00B9 D630_E 2 09 00000000000000000000 "WOSA CDM/CRS: Cassette 3 faulty, write error"
00B9 D631_E 2 09 00000000000000000000 "WOSA CDM/CRS: Roller 3 oder switch faulty"
00B9 D640_E 2 09 00000000000000000000 "WOSA CDM/CRS: Cassette 4 faulty, write error"
00B9 D641_E 2 09 00000000000000000000 "WOSA CDM/CRS: Roller 4 oder switch faulty"
00B9 D651_E 2 09 00000000000000000000 "WOSA CDM/CRS: Roller 5 oder switch faulty"
00B9 D661_E 2 09 00000000000000000000 "WOSA CDM/CRS: Roller 6 oder switch faulty"
00B9 D700_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty"
00B9 D705_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty"
00B9 D710_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photo or pressure sensor faulty"
00B9 D720_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photo or pressure sensor faulty"
00B9 D730_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photo or pressure sensor faulty"
00B9 D740_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photo or pressure sensor faulty"
00B9 D810_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty"
00B9 D820_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty"
00B9 D830_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty"
00B9 D840_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty"
00B9 D901_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9 D902_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9 D903_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9 D904_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9 D905_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9 D906_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9 D907_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9 D908_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9 D909_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9 D910_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9 D911_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"

198 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables XFS 2.0 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
00B9 D912_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D913_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D914_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D915_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D916_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D917_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D918_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D919_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D920_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D921_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D922_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D923_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D924_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D931_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor roller1 dirty"
00B9 D932_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor roller2 dirty"
00B9 D933_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor roller3 dirty"
00B9 D934_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor roller4 dirty"
00B9 D935_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor roller5 dirty"
00B9 D936_E 2 09 00000000000000000000 "WOSA CDM/CRS: Photosensor roller6 dirty"
00B9 D941_E 2 09 00000000000000000000 "WOSA CDM/CRS: Wrong position roller1 or 36V missing"
00B9 D942_E 2 09 00000000000000000000 "WOSA CDM/CRS: Wrong position roller2 or 36V missing"
00B9 D943_E 2 09 00000000000000000000 "WOSA CDM/CRS: Wrong position roller3 or 36V missing"
00B9 D944_E 2 09 00000000000000000000 "WOSA CDM/CRS: Wrong position roller4 or 36V missing"
00B9 D945_E 2 09 00000000000000000000 "WOSA CDM/CRS: Wrong position roller5 or 36V missing"
00B9 D946_E 2 09 00000000000000000000 "WOSA CDM/CRS: Wrong position roller6 or 36V missing"
00B9 DF01_E 2 09 00000000000000000000 "WOSA CDM/CRS: Metal or/and Stripe sensor defect"
00B9 DF03_E 2 09 00000000000000000000 "WOSA CDM/CRS: Metal or/and Stripe sensor defect"
00B9 FE71_E 2 09 00000000000000000000 "WOSA CDM/CRS: Wrong height of note in input tray"
00B9 FE9F_E 2 09 00000000000000000000 "WOSA CDM/CRS: Metal in CashIn tray detected"
00B9 FEA0_E 2 09 00000000000000000000 "WOSA CDM/CRS: Safe door must be closed during this command"
00B9 FEA1_E 2 09 00000000000000000000 "WOSA CDM/CRS: CashIn security failure"
00B9 FEA2_E 2 09 00000000000000000000 "WOSA CDM/CRS: Output position is not empty"
00B9 FEB9_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application or configuration error"
00B9 FEBA_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FEBB_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FEBC_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FEBD_E 2 09 00000000000000000000 "WOSA CDM/CRS: Money taken during retract"
00B9 FEBE_E 2 09 00000000000000000000 "WOSA CDM/CRS: Error in bills presentation"
00B9 FEBF_E 2 09 00000000000000000000 "WOSA CDM/CRS: Error in bills presentation"
00B9 FEC0_E 2 09 00000000000000000000 "WOSA CDM/CRS: Error in bills presentation"
00B9 FEC1_E 2 09 00000000000000000000 "WOSA CDM/CRS: Operator intervention required"
00B9 FEC2_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FEC3_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FEC4_E 2 09 00000000000000000000 "WOSA CDM/CRS: No bills available"
00B9 FEC5_E 2 09 00000000000000000000 "WOSA CDM/CRS: Configuration error"
00B9 FEC6_E 2 09 00000000000000000000 "WOSA CDM/CRS: Operator intervention required"
00B9 FEC7_E 2 09 00000000000000000000 "WOSA CDM/CRS: Operator intervention required"
00B9 FEC8_E 2 09 00000000000000000000 "WOSA CDM/CRS: Operator intervention required"
00B9 FEC9_E 2 09 00000000000000000000 "WOSA CDM/CRS: Operator intervention required"
00B9 FECA_E 2 09 00000000000000000000 "WOSA CDM/CRS: Operator intervention required"
00B9 FECB_E 2 09 00000000000000000000 "WOSA CDM/CRS: Position locked"
00B9 FECC_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FECD_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FECE_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FECF_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FED0_E 2 09 00000000000000000000 "WOSA CDM/CRS: Configuration error"
00B9 FED1_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FED2_E 2 09 00000000000000000000 "WOSA CDM/CRS: Operator intervention required"
00B9 FED3_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FED4_E 2 09 00000000000000000000 "WOSA CDM/CRS: Configuration error, check denomination"
00B9 FFCA_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFCB_E 2 09 00000000000000000000 "WOSA CDM/CRS: Configuration error"

U25604-J-Z745-1-7600 May 2011 199

XFS 2.0 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
00B9 FFCC_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFCD_E 2 09 00000000000000000000 "WOSA CDM/CRS: Installation error"
00B9 FFCE_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFCF_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFD0_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFD1_E 2 09 00000000000000000000 "WOSA CDM/CRS: Installation error"
00B9 FFD2_E 2 09 00000000000000000000 "WOSA CDM/CRS: Installation error"
00B9 FFD3_E 2 09 00000000000000000000 "WOSA CDM/CRS: Installation error"
00B9 FFD4_E 2 09 00000000000000000000 "WOSA CDM/CRS: Installation error"
00B9 FFD5_E 2 09 00000000000000000000 "WOSA CDM/CRS: Configuration error"
00B9 FFD6_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFD7_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFD8_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFD9_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFDA_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFDB_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFDC_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFDD_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFDE_E 2 09 00000000000000000000 "WOSA CDM/CRS: Installation error"
00B9 FFDF_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFE0_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFE1_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFE2_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFE3_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFE4_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFE5_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFE6_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFE7_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFE8_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFE9_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFEA_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFEB_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFEC_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFED_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFEE_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFEF_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFF0_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFF1_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFF2_E 2 09 00000000000000000000 "WOSA CDM/CRS: Hardware error, cannnot dispense or deliver"
00B9 FFF3_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFF4_E 2 09 00000000000000000000 "WOSA CDM/CRS: Configuration error"
00B9 FFF5_E 2 09 00000000000000000000 "WOSA CDM/CRS: Configuration error"
00B9 FFF6_E 2 09 00000000000000000000 "WOSA CDM/CRS: Configuration error"
00B9 FFF7_E 2 09 00000000000000000000 "WOSA CDM/CRS: Configuration error"
00B9 FFF8_E 2 09 00000000000000000000 "WOSA CDM/CRS: Configuration error"
00B9 FFF9_E 2 09 00000000000000000000 "WOSA CDM/CRS: Configuration error"
00B9 FFFA_E 2 09 00000000000000000000 "WOSA CDM/CRS: Configuration error"
00B9 FFFB_E 2 09 00000000000000000000 "WOSA CDM/CRS: Configuration error"
00B9 FFFC_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"
00B9 FFFD_E 2 09 00000000000000000000 "WOSA CDM/CRS: Installation error"
00B9 FFFE_E 2 09 00000000000000000000 "WOSA CDM/CRS: Installation error"
00B9 FFFF_E 2 09 00000000000000000000 "WOSA CDM/CRS: Application error"

200 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables XFS 2.0 Error Classes

Cash In (Class: 00B9_CIN)

Refer to section ”Error Class Mapping” on page 5.

Table 55: XFS 2.0 Cash In (Class: 00B9_CIN)

Error Error Sev. M- M- Status desription
Class Code Status Data INFO
00B9_CIN D010_E 4 99 00B9D010000000000000 "WOSA CDM/CRS: Firmware faulty, stopped"
00B9_CIN D016_E 4 99 00B9D016000000000000 "WOSA CDM/CRS: Booter Firmware faulty, stopped"
00B9_CIN D020_E 4 99 00B9D020000000000000 "WOSA CDM/CRS: V.24 line problem master <==> slave"
00B9_CIN D025_E 4 99 00B9D025000000000000 "WOSA CDM/CRS: Slave controller without Firmware"
00B9_CIN D100_E 4 99 00B9D100000000000000 "WOSA CDM/CRS: Safe controller faulty"
00B9_CIN D101_E 4 99 00B9D101000000000000 "WOSA CDM/CRS: Safe controller no booter or faulty"
00B9_CIN D105_E 4 99 00B9D105000000000000 "WOSA CDM/CRS: Counter controller faulty"
00B9_CIN D106_E 4 99 00B9D106000000000000 "WOSA CDM/CRS: Counter controller no booter or faulty"
00B9_CIN D110_E 4 99 00B9D110000000000000 "WOSA CDM/CRS: Firmware not loaded"
00B9_CIN D120_E 2 99 00B9D120000000000000 "WOSA CDM/CRS: Safety switch of safe module open"
00B9_CIN D125_E 2 99 00B9D125000000000000 "WOSA CDM/CRS: Safety switch of counter module open"
00B9_CIN D135_E 4 99 00B9D135000000000000 "WOSA CDM/CRS: Device lock after retract & quit"
00B9_CIN D136_E 4 99 00B9D136000000000000 "WOSA CDM/CRS: Device lock after jam in counter area"
00B9_CIN D140_E 0 99 00B9D140000000000000 "WOSA CDM/CRS: Hardware requirements not ok"
00B9_CIN D145_E 4 99 00B9D145000000000000 "WOSA CDM/CRS: Hardware requirements not ok"
00B9_CIN D146_E 4 99 00B9D146000000000000 "WOSA CDM/CRS: Requirements for BIM missing"
00B9_CIN D170_E 2 99 00B9D170000000000000 "WOSA CDM/CRS: Money jam during cash-in"
00B9_CIN D171_E 2 99 00B9D171000000000000 "WOSA CDM/CRS: Money jam during cash-in"
00B9_CIN D175_E 2 99 00B9D175000000000000 "WOSA CDM/CRS: Money jam during cash-in"
00B9_CIN D176_E 2 99 00B9D176000000000000 "WOSA CDM/CRS: Money jam during cash-in"
00B9_CIN D178_E 2 99 00B9D178000000000000 "WOSA CDM/CRS: Money jam during cash-in"
00B9_CIN D179_E 2 99 00B9D179000000000000 "WOSA CDM/CRS: Money jam during cash-in"
00B9_CIN D180_E 2 99 00B9D180000000000000 "WOSA CDM/CRS: Note jam in safe area cassettes"
00B9_CIN D181_E 2 99 00B9D181000000000000 "WOSA CDM/CRS: Note jam in safe area roller"
00B9_CIN D182_E 2 99 00B9D182000000000000 "WOSA CDM/CRS: Note jam in safe area cassettes"
00B9_CIN D185_E 2 99 00B9D185000000000000 "WOSA CDM/CRS: Note jam in counter area (cash out tray)"
00B9_CIN D186_E 2 99 00B9D186000000000000 "WOSA CDM/CRS: Note jam in counter area (cash out tray)"
00B9_CIN D187_E 2 99 00B9D187000000000000 "WOSA CDM/CRS: Note jam in counter area (cash out tray)"
00B9_CIN D200_E 2 99 00B9D200000000000000 "WOSA CDM/CRS: Switch in safe area faulty/blocked"
00B9_CIN D201_E 2 99 00B9D201000000000000 "WOSA CDM/CRS: Switch in safe area faulty/blocked"
00B9_CIN D202_E 2 99 00B9D202000000000000 "WOSA CDM/CRS: Switch in safe area faulty/blocked"
00B9_CIN D203_E 2 99 00B9D203000000000000 "WOSA CDM/CRS: Switch in safe area faulty/blocked"
00B9_CIN D204_E 2 99 00B9D204000000000000 "WOSA CDM/CRS: Switch in safe area faulty/blocked"
00B9_CIN D205_E 2 99 00B9D205000000000000 "WOSA CDM/CRS: Switch in counter area faulty/blocked"
00B9_CIN D206_E 2 99 00B9D206000000000000 "WOSA CDM/CRS: Switch in counter area faulty/blocked"
00B9_CIN D207_E 2 99 00B9D207000000000000 "WOSA CDM/CRS: Switch in counter area faulty/blocked"
00B9_CIN D210_E 2 99 00B9D210000000000000 "WOSA CDM/CRS: Measurement station in safe area faulty"
00B9_CIN D214_E 4 99 00B9D214000000000000 "WOSA CDM/CRS: Tape sensor in BIM module reports error"
00B9_CIN D215_E 2 99 00B9D215000000000000 "WOSA CDM/CRS: Measurement station in counter area faulty"
00B9_CIN D216_E 2 99 00B9D216000000000000 "WOSA CDM/CRS: BIM reader line faulty"
00B9_CIN D217_E 2 99 00B9D217000000000000 "WOSA CDM/CRS: BIM communication faulty"
00B9_CIN D218_E 2 99 00B9D218000000000000 "WOSA CDM/CRS: BIM note signals missing/inacceptable"
00B9_CIN D219_E 2 99 00B9D219000000000000 "WOSA CDM/CRS: BIM returns error in call response"
00B9_CIN D220_E 2 99 00B9D220000000000000 "WOSA CDM/CRS: Photosensor intensifier faulty"
00B9_CIN D230_E 2 99 00B9D230000000000000 "WOSA CDM/CRS: Switch in safe area faulty / blocked"
00B9_CIN D231_E 2 99 00B9D231000000000000 "WOSA CDM/CRS: Switch in safe area faulty / blocked"
00B9_CIN D232_E 2 99 00B9D232000000000000 "WOSA CDM/CRS: Switch in safe area faulty / blocked"
00B9_CIN D250_E 2 99 00B9D250000000000000 "WOSA CDM/CRS: Transport motor in safe area faulty"
00B9_CIN D255_E 2 99 00B9D255000000000000 "WOSA CDM/CRS: Transport motor in safe area faulty"

U25604-J-Z745-1-7600 May 2011 201

XFS 2.0 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
00B9_CIN D256_E 2 99 00B9D256000000000000 "WOSA CDM/CRS: Transport motor in safe area faulty"
00B9_CIN D285_E 2 99 00B9D285000000000000 "WOSA CDM/CRS: Error during cash out tray handling"
00B9_CIN D286_E 2 99 00B9D286000000000000 "WOSA CDM/CRS: Error during filling tray handling"
00B9_CIN D287_E 2 99 00B9D287000000000000 "WOSA CDM/CRS: Error during cash out tray handling"
00B9_CIN D295_E 2 99 00B9D295000000000000 "WOSA CDM/CRS: Photosensor of cash out tray covered"
00B9_CIN D296_E 2 99 00B9D296000000000000 "WOSA CDM/CRS: Photosensor of filling tray covered"
00B9_CIN D310_E 2 99 00B9D310000000000000 "WOSA CDM/CRS: Too many bundle reject cassette 1"
00B9_CIN D320_E 2 99 00B9D320000000000000 "WOSA CDM/CRS: Too many bundle reject cassette 2"
00B9_CIN D330_E 2 99 00B9D330000000000000 "WOSA CDM/CRS: Too many bundle reject cassette 3"
00B9_CIN D340_E 2 99 00B9D340000000000000 "WOSA CDM/CRS: Too many bundle reject cassette 4"
00B9_CIN D405_E 2 99 00B9D405000000000000 "WOSA CDM/CRS: No separation possible"
00B9_CIN D406_E 4 99 00B9D406000000000000 "WOSA CDM/CRS: No separation possible"
00B9_CIN D407_E 2 99 00B9D407000000000000 "WOSA CDM/CRS: Metal in input tray detected"
00B9_CIN D408_E 2 99 00B9D408000000000000 "WOSA CDM/CRS: Security stripe sensor defect"
00B9_CIN D410_E 2 99 00B9D410000000000000 "WOSA CDM/CRS: No separation possible"
00B9_CIN D411_E 2 99 00B9D411000000000000 "WOSA CDM/CRS: No separation possible"
00B9_CIN D420_E 2 99 00B9D420000000000000 "WOSA CDM/CRS: No separation possible"
00B9_CIN D421_E 2 99 00B9D421000000000000 "WOSA CDM/CRS: No separation possible"
00B9_CIN D430_E 2 99 00B9D430000000000000 "WOSA CDM/CRS: No separation possible"
00B9_CIN D431_E 2 99 00B9D431000000000000 "WOSA CDM/CRS: No separation possible"
00B9_CIN D440_E 2 99 00B9D440000000000000 "WOSA CDM/CRS: No separation possible"
00B9_CIN D441_E 2 99 00B9D441000000000000 "WOSA CDM/CRS: No separation possible"
00B9_CIN D451_E 2 99 00B9D451000000000000 "WOSA CDM/CRS: No separation possible"
00B9_CIN D461_E 2 99 00B9D461000000000000 "WOSA CDM/CRS: No separation possible"
00B9_CIN D510_E 2 99 00B9D510000000000000 "WOSA CDM/CRS: Too many bad bills cassette 1"
00B9_CIN D520_E 2 99 00B9D520000000000000 "WOSA CDM/CRS: Too many bad bills cassette 2"
00B9_CIN D530_E 2 99 00B9D530000000000000 "WOSA CDM/CRS: Too many bad bills cassette 3"
00B9_CIN D540_E 2 99 00B9D540000000000000 "WOSA CDM/CRS: Too many bad bills cassette 4"
00B9_CIN D605_E 2 99 00B9D605000000000000 "WOSA CDM/CRS: ESCROW faulty (no signals)"
00B9_CIN D610_E 2 99 00B9D610000000000000 "WOSA CDM/CRS: Cassette 1 faulty, write error"
00B9_CIN D611_E 2 99 00B9D611000000000000 "WOSA CDM/CRS: Roller 1 or switch faulty"
00B9_CIN D620_E 2 99 00B9D620000000000000 "WOSA CDM/CRS: Cassette 2 faulty, write error"
00B9_CIN D621_E 2 99 00B9D621000000000000 "WOSA CDM/CRS: Roller 2 oder switch faulty"
00B9_CIN D630_E 2 99 00B9D630000000000000 "WOSA CDM/CRS: Cassette 3 faulty, write error"
00B9_CIN D631_E 2 99 00B9D631000000000000 "WOSA CDM/CRS: Roller 3 oder switch faulty"
00B9_CIN D640_E 2 99 00B9D640000000000000 "WOSA CDM/CRS: Cassette 4 faulty, write error"
00B9_CIN D641_E 2 99 00B9D641000000000000 "WOSA CDM/CRS: Roller 4 oder switch faulty"
00B9_CIN D651_E 2 99 00B9D651000000000000 "WOSA CDM/CRS: Roller 5 oder switch faulty"
00B9_CIN D661_E 2 99 00B9D661000000000000 "WOSA CDM/CRS: Roller 6 oder switch faulty"
00B9_CIN D700_E 2 99 00B9D700000000000000 "WOSA CDM/CRS: Photosensor is dirty"
00B9_CIN D705_E 2 99 00B9D705000000000000 "WOSA CDM/CRS: Photosensor is dirty"
00B9_CIN D710_E 2 99 00B9D710000000000000 "WOSA CDM/CRS: Photo or pressure sensor faulty"
00B9_CIN D720_E 2 99 00B9D720000000000000 "WOSA CDM/CRS: Photo or pressure sensor faulty"
00B9_CIN D730_E 2 99 00B9D730000000000000 "WOSA CDM/CRS: Photo or pressure sensor faulty"
00B9_CIN D740_E 2 99 00B9D740000000000000 "WOSA CDM/CRS: Photo or pressure sensor faulty"
00B9_CIN D810_E 2 99 00B9D810000000000000 "WOSA CDM/CRS: Photosensor is dirty"
00B9_CIN D820_E 2 99 00B9D820000000000000 "WOSA CDM/CRS: Photosensor is dirty"
00B9_CIN D830_E 2 99 00B9D830000000000000 "WOSA CDM/CRS: Photosensor is dirty"
00B9_CIN D840_E 2 99 00B9D840000000000000 "WOSA CDM/CRS: Photosensor is dirty"
00B9_CIN D901_E 2 99 00B9D901000000000000 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9_CIN D902_E 2 99 00B9D902000000000000 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9_CIN D903_E 2 99 00B9D903000000000000 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9_CIN D904_E 2 99 00B9D904000000000000 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9_CIN D905_E 2 99 00B9D905000000000000 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9_CIN D906_E 2 99 00B9D906000000000000 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9_CIN D907_E 2 99 00B9D907000000000000 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9_CIN D908_E 2 99 00B9D908000000000000 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9_CIN D909_E 2 99 00B9D909000000000000 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9_CIN D910_E 2 99 00B9D910000000000000 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9_CIN D911_E 2 99 00B9D911000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D912_E 2 99 00B9D912000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D913_E 2 99 00B9D913000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"

202 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables XFS 2.0 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
00B9_CIN D914_E 2 99 00B9D914000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D915_E 2 99 00B9D915000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D916_E 2 99 00B9D916000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D917_E 2 99 00B9D917000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D918_E 2 99 00B9D918000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D919_E 2 99 00B9D919000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D920_E 2 99 00B9D920000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D921_E 2 99 00B9D921000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D922_E 2 99 00B9D922000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D923_E 2 99 00B9D923000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D924_E 2 99 00B9D924000000000000 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D931_E 2 99 00B9D931000000000000 "WOSA CDM/CRS: Photosensor roller1 dirty"
00B9_CIN D932_E 2 99 00B9D932000000000000 "WOSA CDM/CRS: Photosensor roller2 dirty"
00B9_CIN D933_E 2 99 00B9D933000000000000 "WOSA CDM/CRS: Photosensor roller3 dirty"
00B9_CIN D934_E 2 99 00B9D934000000000000 "WOSA CDM/CRS: Photosensor roller4 dirty"
00B9_CIN D935_E 2 99 00B9D935000000000000 "WOSA CDM/CRS: Photosensor roller5 dirty"
00B9_CIN D936_E 2 99 00B9D936000000000000 "WOSA CDM/CRS: Photosensor roller6 dirty"
00B9_CIN D941_E 2 99 00B9D941000000000000 "WOSA CDM/CRS: Wrong position roller1 or 36V missing"
00B9_CIN D942_E 2 99 00B9D942000000000000 "WOSA CDM/CRS: Wrong position roller2 or 36V missing"
00B9_CIN D943_E 2 99 00B9D943000000000000 "WOSA CDM/CRS: Wrong position roller3 or 36V missing"
00B9_CIN D944_E 2 99 00B9D944000000000000 "WOSA CDM/CRS: Wrong position roller4 or 36V missing"
00B9_CIN D945_E 2 99 00B9D945000000000000 "WOSA CDM/CRS: Wrong position roller5 or 36V missing"
00B9_CIN D946_E 2 99 00B9D946000000000000 "WOSA CDM/CRS: Wrong position roller6 or 36V missing"
00B9_CIN DF01_E 2 99 00B9DF01000000000000 "WOSA CDM/CRS: Metal or/and Stripe sensor defect"
00B9_CIN DF03_E 2 99 00B9DF03000000000000 "WOSA CDM/CRS: Metal or/and Stripe sensor defect"
00B9_CIN FE71_E 2 99 00B9FE71000000000000 "WOSA CDM/CRS: Wrong height of note in input tray"
00B9_CIN FE9F_E 2 99 00B9FE9F000000000000 "WOSA CDM/CRS: Metal in CashIn tray detected"
00B9_CIN FEA0_E 2 99 00B9FEA000000000000 "WOSA CDM/CRS: Safe door must be closed during this
0 command"
00B9_CIN FEA1_E 2 99 00B9FEA100000000000 "WOSA CDM/CRS: CashIn security failure"
0
00B9_CIN FEA2_E 2 99 00B9FEA200000000000 "WOSA CDM/CRS: Output position is not empty"
0
00B9_CIN FEB9_E 2 99 00B9FEB900000000000 "WOSA CDM/CRS: Application or configuration error"
0
00B9_CIN FEBA_E 2 99 00B9FEBA00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FEBB_E 2 99 00B9FEBB00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FEBC_E 2 99 00B9FEBC00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FEBD_E 2 99 00B9FEBD00000000000 "WOSA CDM/CRS: Money taken during retract"
0
00B9_CIN FEBE_E 2 99 00B9FEBE00000000000 "WOSA CDM/CRS: Error in bills presentation"
0
00B9_CIN FEBF_E 2 99 00B9FEBF00000000000 "WOSA CDM/CRS: Error in bills presentation"
0
00B9_CIN FEC0_E 2 99 00B9FEC000000000000 "WOSA CDM/CRS: Error in bills presentation"
0
00B9_CIN FEC1_E 2 99 00B9FEC100000000000 "WOSA CDM/CRS: Operator intervention required"
0
00B9_CIN FEC2_E 2 99 00B9FEC200000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FEC3_E 2 99 00B9FEC300000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FEC4_E 2 99 00B9FEC400000000000 "WOSA CDM/CRS: No bills available"
0
00B9_CIN FEC5_E 2 99 00B9FEC500000000000 "WOSA CDM/CRS: Configuration error"
0
00B9_CIN FEC6_E 2 99 00B9FEC600000000000 "WOSA CDM/CRS: Operator intervention required"
0
00B9_CIN FEC7_E 2 99 00B9FEC700000000000 "WOSA CDM/CRS: Operator intervention required"
0
00B9_CIN FEC8_E 2 99 00B9FEC800000000000 "WOSA CDM/CRS: Operator intervention required"
0

U25604-J-Z745-1-7600 May 2011 203

XFS 2.0 Error Classes M-Status & M-Data Reference Tables

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
00B9_CIN FEC9_E 2 99 00B9FEC900000000000 "WOSA CDM/CRS: Operator intervention required"
0
00B9_CIN FECA_E 2 99 00B9FECA00000000000 "WOSA CDM/CRS: Operator intervention required"
0
00B9_CIN FECB_E 2 99 00B9FECB00000000000 "WOSA CDM/CRS: Position locked"
0
00B9_CIN FECC_E 2 99 00B9FECC00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FECD_E 2 99 00B9FECD00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FECE_E 2 99 00B9FECE00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FECF_E 2 99 00B9FECF00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FED0_E 2 99 00B9FED000000000000 "WOSA CDM/CRS: Configuration error"
0
00B9_CIN FED1_E 2 99 00B9FED100000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FED2_E 2 99 00B9FED200000000000 "WOSA CDM/CRS: Operator intervention required"
0
00B9_CIN FED3_E 2 99 00B9FED300000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FED4_E 2 99 00B9FED400000000000 "WOSA CDM/CRS: Configuration error, check denomination"
0
00B9_CIN FFCA_E 2 99 00B9FFCA00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FFCB_E 2 99 00B9FFCB00000000000 "WOSA CDM/CRS: Configuration error"
0
00B9_CIN FFCC_E 2 99 00B9FFCC00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FFCD_E 2 99 00B9FFCD00000000000 "WOSA CDM/CRS: Installation error"
0
00B9_CIN FFCE_E 2 99 00B9FFCE00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FFCF_E 2 99 00B9FFCF00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FFD0_E 2 99 00B9FFD000000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FFD1_E 2 99 00B9FFD100000000000 "WOSA CDM/CRS: Installation error"
0
00B9_CIN FFD2_E 2 99 00B9FFD200000000000 "WOSA CDM/CRS: Installation error"
0
00B9_CIN FFD3_E 2 99 00B9FFD300000000000 "WOSA CDM/CRS: Installation error"
0
00B9_CIN FFD4_E 2 99 00B9FFD400000000000 "WOSA CDM/CRS: Installation error"
0
00B9_CIN FFD5_E 2 99 00B9FFD500000000000 "WOSA CDM/CRS: Configuration error"
0
00B9_CIN FFD6_E 2 99 00B9FFD600000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FFD7_E 2 99 00B9FFD700000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FFD8_E 2 99 00B9FFD800000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FFD9_E 2 99 00B9FFD900000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FFDA_E 2 99 00B9FFDA00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FFDB_E 2 99 00B9FFDB00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FFDC_E 2 99 00B9FFDC00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FFDD_E 2 99 00B9FFDD00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FFDE_E 2 99 00B9FFDE00000000000 "WOSA CDM/CRS: Installation error"
0
00B9_CIN FFDF_E 2 99 00B9FFDF00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FFE0_E 2 99 00B9FFE0000000000000 "WOSA CDM/CRS: Application error"

204 May 2011 U25604-J-Z745-1-7600

M-Status & M-Data Reference Tables XFS 2.0 Error Classes

Error Error Sev. M- M- Status desription

Class Code Status Data INFO
00B9_CIN FFE1_E 2 99 00B9FFE1000000000000 "WOSA CDM/CRS: Application error"
00B9_CIN FFE2_E 2 99 00B9FFE2000000000000 "WOSA CDM/CRS: Application error"
00B9_CIN FFE3_E 2 99 00B9FFE3000000000000 "WOSA CDM/CRS: Application error"
00B9_CIN FFE4_E 2 99 00B9FFE4000000000000 "WOSA CDM/CRS: Application error"
00B9_CIN FFE5_E 2 99 00B9FFE5000000000000 "WOSA CDM/CRS: Application error"
00B9_CIN FFE6_E 2 99 00B9FFE6000000000000 "WOSA CDM/CRS: Application error"
00B9_CIN FFE7_E 2 99 00B9FFE7000000000000 "WOSA CDM/CRS: Application error"
00B9_CIN FFE8_E 2 99 00B9FFE8000000000000 "WOSA CDM/CRS: Application error"
00B9_CIN FFE9_E 2 99 00B9FFE9000000000000 "WOSA CDM/CRS: Application error"
00B9_CIN FFEA_E 2 99 00B9FFEA00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FFEB_E 2 99 00B9FFEB00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FFEC_E 2 99 00B9FFEC00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FFED_E 2 99 00B9FFED00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FFEE_E 2 99 00B9FFEE00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FFEF_E 2 99 00B9FFEF00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FFF0_E 2 99 00B9FFF0000000000000 "WOSA CDM/CRS: Application error"
00B9_CIN FFF1_E 2 99 00B9FFF1000000000000 "WOSA CDM/CRS: Application error"
00B9_CIN FFF2_E 2 99 00B9FFF2000000000000 "WOSA CDM/CRS: Hardware error, cannot dispense or deliver"
00B9_CIN FFF3_E 2 99 00B9FFF3000000000000 "WOSA CDM/CRS: Application error"
00B9_CIN FFF4_E 2 99 00B9FFF4000000000000 "WOSA CDM/CRS: Configuration error"
00B9_CIN FFF5_E 2 99 00B9FFF5000000000000 "WOSA CDM/CRS: Configuration error"
00B9_CIN FFF6_E 2 99 00B9FFF6000000000000 "WOSA CDM/CRS: Configuration error"
00B9_CIN FFF7_E 2 99 00B9FFF7000000000000 "WOSA CDM/CRS: Configuration error"
00B9_CIN FFF8_E 2 99 00B9FFF8000000000000 "WOSA CDM/CRS: Configuration error"
00B9_CIN FFF9_E 2 99 00B9FFF9000000000000 "WOSA CDM/CRS: Configuration error"
00B9_CIN FFFA_E 2 99 00B9FFFA000000000000 "WOSA CDM/CRS: Configuration error"
00B9_CIN FFFB_E 2 99 00B9FFFB00000000000 "WOSA CDM/CRS: Configuration error"
0
00B9_CIN FFFC_E 2 99 00B9FFFC00000000000 "WOSA CDM/CRS: Application error"
0
00B9_CIN FFFD_E 2 99 00B9FFFD00000000000 "WOSA CDM/CRS: Installation error"
0
00B9_CIN FFFE_E 2 99 00B9FFFE00000000000 "WOSA CDM/CRS: Installation error"
0
00B9_CIN FFFF_E 2 99 00B9FFFF000000000000 "WOSA CDM/CRS: Application error"

U25604-J-Z745-1-7600 May 2011 205

XFS 2.0 Error Classes M-Status & M-Data Reference Tables

206 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables
The following tables show the CSC-W32 device error classes that are mapped
to MDS i Series Status codes and Diebold 912/911 error codes. The registry
path ..\ProTopas\CurrentVersion\CCERRMAP\ is devided in error sub
sections where in each section the MDS i Series Status code and Diebold 912/
911 error code is mapped. In addition you will find reference tables of application
error codes (so called LYNX errors as nick name, which can be identified by the
class numbers 64xx).
The error mapping can be customized in configuration file "CCERRMAP.INA".
See ProCash/DDC ProConsult/DDC Installation manual section "Parameter
Management" for details about setting up the error mapping table
(CCERRMAP.INA) and how to update the contents into the Windows registry.
Detailed descriptions about CSC-W32 error codes of each device class are
described in the manual CSC-W32 System Messages (available on the Wincor
Nixdorf Intranet server).

CSC-W32 Error Classes

Cash Dispenser V1 (old series) (Class: 0007)

The following table lists the MDS Status codes assigned to the device class
Cash Dispenser V1 (old series, will not produced any more).

Table 56: Cash Dispenser V1 (Class: 0007)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0007 DEFA_W ?0812 80000000000000000 000DI01:3A:38:31 "DISPENSER V1: Default warning if no CSCW32 error
found"
0007 DEFA_E ?0812 80000000000000000 000DI01:3A:38:31 "DISPENSER V1: Default error if no CSCW32 error found"
0007 0100_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: No cash in collecting tray"
0007 0200_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Transport direction illegal"
0007 0300_E ?0782 80000000000000000 000DI01:3D:37:38 "DISPENSER V1: Remaining capacity of reject bin to small"
0007 0400_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Syntax error in job"
0007 1000_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Incorrect block length, error in job"
0007 1100_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Incorrect device specification, error in job"
0007 1200_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER V1: Wrong job specification"
0007 1300_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Incorrect job length"
0007 1400_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Addressed cassette does not exist"
0007 1500_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Attempt to read from an unknown area"
0007 1600_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Field name in job unknown"
0007 1700_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Syntax error in job"
0007 1800_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Invalid transport destination"
0007 1900_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Illegal separator used in the job"

May 2011 207

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
0007 1A00_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: A job was previously issued and is still
busy"
0007 1B00_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Attempt to write to protected cass.
EEPROM"
0007 1C00_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: There is no PUT PROM in the cash-out
controller"
0007 1D00_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Illegal specification transferred in SV job"
0007 2000_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V1: Amount demanded cannot be dispensed"
0007 2100_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Time-out in photosensor of measuring
station"
0007 2200_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER V1: Time-out photosensor L1"
0007 2300_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER V1: Time-out for collecting tray photosensor
L19"
0007 2400_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER V1: Time-out in photosensor L20 for reject
cassette"
0007 2500_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Single reject switch defective"
0007 2600_E ?0585 80000000000000000 000DI01:3F:35:38 "DISPENSER V1: All banknotes were identified as multiple
dispenses"
0007 2700_E ?0585 80000000000000000 000DI01:3F:35:38 "DISPENSER V1: The dispenser module is defective"
0007 2800_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V1: Requested amount cannot be dispensed"
0007 2900_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: no cassette for the requested currency"
0007 2A00_E ?0354 80000000000000000 000DI01:3E:00:00 "DISPENSER V1: parameter is larger than 40 banknotes"
0007 2B00_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Electronics of the photosensor amplifier
defect"
0007 2C00_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Unknow device configuration"
0007 2D00_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L1,L17,L25"
0007 3100_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V1: Times-out of path monitor in 1. dispenser
module"
0007 3200_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V1: Time-out of path monitor in 2. dispenser
module"
0007 3300_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V1: Time-out of path monitor in 3. dispenser
module"
0007 3400_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V1: Time-out of path monitor in 4. dispenser
module"
0007 3500_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V1: Time-out of path monitor in 5. dispenser
module"
0007 5000_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L17 blocked"
0007 5100_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L18 or L22 blocked"
0007 5110_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L18 does not become free"
0007 5111_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L18 does not become free"
0007 5118_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L18 is not reached"
0007 5119_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L18 is not reached"
0007 5200_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L19 blocked"
0007 5210_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L19 does not become free"
0007 5211_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L19 does not become free"
0007 5218_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L19 is not reached"
0007 5219_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L19 is not reached"
0007 5300_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L20 blocked"
0007 5400_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L21 blocked"
0007 5410_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L21 does not become free"
0007 5418_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L21 is not reached"
0007 5500_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L22 does not become free"
0007 5510_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L22 does not become free"
0007 5511_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L22 does not become free"
0007 5518_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L22 is not reached"
0007 5519_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L22 is not reached"
0007 5610_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L23 does not become free"
0007 5611_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L23 does not become free"
0007 5618_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L23 is not reached"
0007 5619_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Photosensor L23 is not reached"
0007 5700_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Does not reach the bottom Collecting tray
swivel arm"
0007 5710_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Swivel arm does not reach the bottom"
0007 5800_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Collecting tray swivel arm does not reach
the top"

208 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
0007 5810_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Swivel arm does not reach the top
position"
0007 5B00_E @04 904 000DR01:3F:30:41 "DISPENSER V1: Money slot/shutter does not close
completely"
0007 5B10_E @04 904 000DR01:3F:30:41 "DISPENSER V1: Shutter was not closed completely"
0007 5B11_E @04 904 000DR01:3F:30:41 "DISPENSER V1: Shutter was not closed completely"
0007 5B12_E @04 904 000DR01:3F:30:41 "DISPENSER V1: Shutter was not closed completely"
0007 5B13_E @04 904 000DR01:3F:30:41 "DISPENSER V1: Shutter was not closed completely"
0007 5C00_E @00 900 000DR01:3A:33:41 "DISPENSER V1: Money slot/shutter does not open
completely"
0007 5C10_E @00 900 000DR01:3A:33:41 "DISPENSER V1: Shutter was not open completely"
0007 5C11_E @00 900 000DR01:3A:33:41 "DISPENSER V1: Shutter was not completely open"
0007 5C12_E @00 900 000DR01:3A:33:41 "DISPENSER V1: Shutter was not completely open"
0007 5C13_E @00 900 000DR01:3A:33:41 "DISPENSER V1: Shutter was not completely open"
0007 5D00_E @00 900 000DR01:3A:36:41 "DISPENSER V1: Money does not reach L17"
0007 5D10_E @00 900 000DR01:3A:31:41 "DISPENSER V1: Transport motor M2 does not return timing
pulses"
0007 5D11_E @00 900 000DR01:3A:31:41 "DISPENSER V1: Transport motor M2 does not return timing
pulses"
0007 5F10_E @00 900 000DR01:3A:36:41 "DISPENSER V1: Photosensor L25 blocked"
0007 5F11_E @00 900 000DR01:3A:36:41 "DISPENSER V1: Photosensor L25 does not become free"
0007 5F18_E @00 900 000DR01:3A:36:41 "DISPENSER V1: Photosensor L25 is not reached"
0007 5F19_E @00 900 000DR01:3A:36:41 "DISPENSER V1: Photosensor L25 is not reached"
0007 6300_E @00 900 000DR01:3A:36:41 "DISPENSER V1: Money does not reach L21"
0007 6310_E @00 900 000DR01:3A:37:41 "DISPENSER V1: Photosensor L21 does not become free"
0007 6311_E @00 900 000DR01:3A:37:41 "DISPENSER V1: Photosensor L21 does not become free"
0007 6318_E @00 900 000DR01:3A:37:41 "DISPENSER V1: Photosensor L21 not reached"
0007 6319_E @00 900 000DR01:3A:37:41 "DISPENSER V1: Photosensor L21 is not reached"
0007 7010_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Correct performed retract after TIMEOUT"
0007 7011_E @00 900 000DR01:3A:39:41 "DISPENSER V1: Photosensor L26 does not become free"
0007 7012_E @04 900 000DR01:3A:41:40 "DISPENSER V1: Photosensor L26 unexpectedly covered"
0007 7013_E @04 900 000DR01:3A:41:40 "DISPENSER V1: Photosensor L26 unexpectedly covered"
0007 7018_E @04 900 000DR01:3A:41:40 "DISPENSER V1: Photosensor L26 is not reached"
0007 7019_E @04 900 000DR01:3A:41:40 "DISPENSER V1: Photosensor L26 already free before
retract"
0007 7110_E ?1110 80000000000000000 000DI01:3E:01:01 "DISPENSER V1: Correct retract performed after TIMEOUT"
0007 7111_E @04 904 000DR01:23:00:01 "DISPENSER V1: Photosensor L27 does not become free"
0007 7112_E @04 904 000DR01:23:00:01 "DISPENSER V1: Photosensor L27 unexpectedly covered"
0007 7113_E @04 904 000DR01:23:00:01 "DISPENSER V1: Photosensor L26 unexpectedly covered"
0007 7118_E @04 904 000DR01:23:00:01 "DISPENSER V1: Photosensor L27 is not reached"
0007 7119_E @04 904 000DR01:23:00:01 "DISPENSER V1: Photosensor L27 becomes free never-
theless"
0007 7210_E @00 900 000DR01:3A:39:41 "DISPENSER V1: Photosensor L28 does not become free"
0007 7211_E @00 900 000DR01:3A:39:41 "DISPENSER V1: Photosensor L28 does not become free"
0007 7218_E @00 900 000DR01:3A:39:41 "DISPENSER V1: Photosensor L28 is not reached"
0007 7219_E @00 900 000DR01:3A:39:41 "DISPENSER V1: Photosensor L28 is not reached"
0007 7310_E @00 900 000DR01:3A:39:41 "DISPENSER V1: Photosensor L29 does not become free"
0007 7311_E @00 900 000DR01:3A:39:41 "DISPENSER V1: Photosensor L29 does not become free"
0007 7318_E @00 900 000DR01:3A:39:41 "DISPENSER V1: Photosensor L29 is not reached"
0007 7319_E @00 900 000DR01:3A:39:41 "DISPENSER V1: Photosensor L29 is not reached"
0007 7410_E @00 900 000DR01:3A:36:41 "DISPENSER V1: Photosensor L30 does not become free"
0007 7411_E @00 900 000DR01:3A:36:41 "DISPENSER V1: Photosensor L30 does not become free"
0007 7418_E @00 900 000DR01:3A:39:41 "DISPENSER V1: Photosensor L30 is not reached"
0007 7419_E @00 900 000DR01:3A:39:41 "DISPENSER V1: Photosensor L30 is not reached"
0007 7510_E @00 900 000DR01:3A:36:41 "DISPENSER V1: Photosensor L31 does not become free"
0007 7511_E @00 900 000DR01:3A:36:41 "DISPENSER V1: Photosensor L31 does not become free"
0007 7518_E @00 900 000DR01:3A:39:41 "DISPENSER V1: Photosensor L31 is not reached"
0007 7519_E @00 900 000DR01:3A:39:41 "DISPENSER V1: Photosensor L31 is not reached"
0007 7610_E @00 900 000DR01:3A:36:41 "DISPENSER V1: Photosensor L32 does not become free"
0007 7611_E @00 900 000DR01:3A:36:41 "DISPENSER V1: Photosensor L32 does not become free"
0007 7618_E @00 900 000DR01:3A:39:41 "DISPENSER V1: Photosensor L32 is not reached"
0007 7619_E @00 900 000DR01:3A:39:41 "DISPENSER V1: Photosensor L32 is not reached"
0007 7710_E @00 900 000DR01:3A:36:41 "DISPENSER V1: Photosensor L33 does not become free"
0007 7711_E @00 900 000DR01:3A:36:41 "DISPENSER V1: Photosensor L33 does not become free"

May 2011 209

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
0007 7718_E @00 900 000DR01:3A:39:41 "DISPENSER V1: Photosensor L33 is not reached"
0007 7719_E @00 900 000DR01:3A:39:41 "DISPENSER V1: Photosensor L33 is not reached"
0007 7910_E @00 900 000DR01:3A:36:41 "DISPENSER V1: Photosensor L35 does not become free"
0007 7911_E @00 900 000DR01:3A:36:41 "DISPENSER V1: Photosensor L35 does not become free"
0007 7918_E @00 900 000DR01:3A:39:41 "DISPENSER V1: Photosensor L35 is not reached"
0007 7919_E @00 900 000DR01:3A:39:41 "DISPENSER V1: Photosensor L35 is not reached"
0007 7B10_E @00 900 000DR01:3A:31:41 "DISPENSER V1: Photosensor G9 is not reached"
0007 7B11_E @00 900 000DR01:3A:31:41 "DISPENSER V1: Photosensor G9 is not reached"
0007 7C10_E @00 900 000DR01:3A:31:41 "DISPENSER V1: Photosensor G8 is not reached"
0007 7C11_E @00 900 000DR01:3A:31:41 "DISPENSER V1: Photosensor G8 is not reached"
0007 8000_E ?0363 80000000000000000 000DI01:3F:33:36 "DISPENSER V1: Invalid cassette slot"
0007 8001_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Error in self-test"
0007 8002_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Internal error Possible hardware error"
0007 8004_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Error occurs only with coded V24 line to
the CDM"
0007 8005_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: DLL for SW encording, CSCEDSDLL,
could not be opened"
0007 8006_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Invalid CRC received with encoded line"
0007 8007_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Keyword specified in parameter block has
invalid length"
0007 8009_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: The segment selector is invalid"
0007 9000_E ?0812 80000000000000000 000DI01:3A:38:31 "DISPENSER V1: Time-out during comm. with measuring
station"
0007 9100_E ?0812 80000000000000000 000DI01:3A:38:31 "DISPENSER V1: Time-out during comm. with photosensor
amplifier"
0007 9200_E ?0812 80000000000000000 000DI01:3A:38:31 "DISPENSER V1: Customer relay not connected"
0007 B000_E ?0354 80000000000000000 000DI01:3D:33:35 "DISPENSER V1: Error when releasing the cassette"
0007 B100_E ?0354 80000000000000000 000DI01:3D:33:35 "DISPENSER V1: Error when initiating the cassette"
0007 B200_E ?0793 80000000000000000 000DI01:3D:37:39 "DISPENSER V1: No reject cassette"
0007 B300_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V1: There is no dispensing cassette"
0007 B400_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Time-out at cassette initialization/release"
0007 B510_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: EE-PROM defect"
0007 B511_E ?0592 80000000000000000 000DI01:3B:35:39 "DISPENSER V1: Main motor is not working"
0007 B512_E ?0592 80000000000000000 000DI01:3B:35:39 "DISPENSER V1: Incorrect motor speed"
0007 B513_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Hardware error (processor)"
0007 B514_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Hardware error (E-PROM)"
0007 B523_E ?0363 80000000000000000 000DI01:3F:33:36 "DISPENSER V1: Cassette busy (pressure being accumu-
lated)"
0007 B530_E ?0372 80000000000000000 000DI01:3B:33:37 "DISPENSER V1: Reject position cannot be reached"
0007 B531_E ?0372 80000000000000000 000DI01:3B:33:37 "DISPENSER V1: Reject position cannot be reached"
0007 B534_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Processor defect"
0007 B535_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: RAM defect"
0007 B536_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Checksum error, E-PROM"
0007 B537_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Checksum error, EE-PROM"
0007 B538_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Clutch signal error"
0007 B539_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V1: Dispensing sensor error"
0007 B544_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Evaluation electronics defect"
0007 B545_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Card is not in a device"
0007 B546_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Device could not be identified"
0007 B547_E ?0354 80000000000000000 000DI01:3D:33:35 "DISPENSER V1: Job currently not allowed"
0007 B548_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Job unknown"
0007 B600_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Area/subarea selected does not exist"
0007 B700_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: No free block"
0007 B800_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Area selected already exists"
0007 B900_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER V1: Character cannot be written"
0007 BA00_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Attempt to write to a write-protected area"
0007 BB00_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Error during processing of the cassette
EE-PROM"
0007 BC00_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Required area cannot be dissolved"
0007 BD00_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Old password incorrect"
0007 BE00_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Syntax error in job"
0007 C000_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V1: Cash cannot be dispensed from the
selected cassette"
0007 C100_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V1: Cash cannot dispensed from cassette"

210 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
0007 C200_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V1: Hardware lock"
0007 C300_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Cannot determine reference value"
0007 C400_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Number of banknotes too high for
reference value"
0007 C500_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Not possible to determine the reference
value"
0007 C600_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Not possible to accumulate the data-
specific pressure"
0007 D000_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: The transport key is missing"
0007 D100_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: The line key is missing"
0007 D200_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: The safe door is not open"
0007 D300_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: CODE TEST application command not
possible"
0007 D400_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: Key test not possible, because encryption
is off"
0007 D500_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: This message occurs in the dialog"
0007 D600_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER V1: This error occurs in the dialog"

Cash Dispenser NG (Classes: 0018/AA18/001D)

The following table lists the MDS Status codes assigned to the device classes
Cash Dispenser NG. Error codes of class "0018" are basic errors. Class AA18
is the USB class assigned to the Cash Dispenser device. Error codes of class
"001D" are extended errors.

The class AA18 is an internal generated class that is derived from the
original CSC-W32 USB communication class 0003.
Refer to section ”Error Class Mapping” on page 5.

Table 57: Cash Dispenser NG (Classes: 0018/AA18/001D)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0018 DEFA_W ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER NG: DEFAULT_WARNING"
0018 DEFA_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER NG: DEFAULT_ERROR"
0018 E000_W @04 904 000DR01:23:00:01 "DISPENSER NG: No banknotes taken by the customer"
0018 E000_E @04 904 000DR01:23:00:01 "DISPENSER NG: No banknotes taken by the customer"
0018 E001_W @04 904 000DR01:23:00:01 "DISPENSER NG: All banknotes taken by the customer"
0018 E001_E @04 904 000DR01:23:00:01 "DISPENSER NG: All banknotes taken by the customer"
0018 E002_W ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER NG: Firmware on disk is newer than SW
loaded in CDM-NG"
0018 E002_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER NG: Firmware on disk is newer than SW
loaded in CDM-NG"
0018 E003_W ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER NG: There is no firmware loaded in the CDM-
NG"
0018 E003_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER NG: There is no firmware loaded in the CDM-
NG"
0018 E004_W ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER NG: DH configured to switch LEDs"
0018 E004_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER NG: DH configured to switch LEDs"
0018 E005_W ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER NG: Handling error at the filling tray"
0018 E005_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER NG: Handling error at the filling tray"
0018 EF00_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: V24 data not in the expected format"
0018 EF01_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Invalid CRC received with encrypted line"
0018 EF02_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Wrong value for FRM_AUTO_LOAD in
CSCCNG section"

May 2011 211

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
0018 EF03_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Wrong value for LED in CSCINI/Registry
with CSCCNG"
0018 EF04_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Firmware loading could not be completed"
0018 EF05_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Invalid currency files, check registry
configuration"
0018 EF06_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Invalid currency Firmware loading could
not be completed"
0018 EF07_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Wrong value for RECOVERY in Registry"
0018 EF08_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Wrong value for VARIANT in Registry"
0018 EF09_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Wrong value for BEB_STATISTICS in
Registry"
0018 EF0A_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Not enough currency files installed"
0018 EF0B_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Wrong value for CHECK_MODULES in
Registry"
0018 EF0C_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Wrong value for DISPENSEIN_TRACE in
Registry"
0018 EF0D_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Wrong value for CY_AUTOLOAD in
Registry"
0018 EF0E_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Wrong value for CY_MAP_NOTES in
Registry"
0018 EF0F_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Wrong value for CONFIG_BACKUP in
Registry"
0018 EF10_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Wrong value for LOADER_CTL in
Registry"
0018 EF11_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: BIM module of wrong type recognized"
0018 EF12_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Currency file could not be opened"
0018 EF13_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Currency file could not be read"
0018 EF14_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Firmware file could not be opened"
0018 EF15_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Firmware file could not be read"
0018 EF16_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Invalid firmware file format"
0018 EF17_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: BIM manipulation"
0018 EF18_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: SCOPE active but jumper of CMD-V4 in
wrong position"
0018 EF1A_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Wrong value for FILE_CTR in Registry"
0018 F000_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Firmware not loaded in CDM-NG"
0018 F001_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Wrong syntax"
0018 F002_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: One of the locks is active"
0018 F003_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Error occured during execution of
command"
0018 F004_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Safe door must be open for this
command"
0018 F005_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The command cannot be executed at this
point of time"
0018 F006_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The CDM-NG recognized a problem with
the encryption"
0018 F007_E @04 904 000DR01:23:00:01 "DISPENSER NG: If no error found"
0018 F012_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Same error as
CNG_FRM_DEVICE_NOT_READY"
0018 F013_E @04 904 000DR01:23:00:01 "DISPENSER NG: The same error as CNG_FRM_ERROR
with an exception"
0018 F015_E @04 904 000DR01:23:00:01 "DISPENSER NG: The same error as
CNG_FRM_CONTEXT with an exception"
0018 FE06_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: COMM reports invalid spec. for the
protocol"
0018 FE07_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: A COMM WRITE command is cancelled
by the user"
0018 FE08_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: COMM WRITE command could not be
executed"
0018 FE09_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: A COMM READ command could not be
executed"
0018 FE0A_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: A COMM READ command is cancelled by
the user"
0018 FE0B_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The COMM driver reports a parity error"
0018 FE0C_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The COMM driver reports a general error"
0018 FE0F_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Peripheral device did not answer"
0018 FE13_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The channel was not initialized"
0018 FE16_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The COMM driver reports a break"

212 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
0018 FE7A_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The COMM driver reports a overrun error"
0018 FE7B_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The COMM driver reports a frameing
error"
0018 FE85_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The COMM driver could not be opened"
0018 FE89_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The pointer pTxData is illegal"
0018 FE8B_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Called function is invalid for CscCom-
mOpen"
0018 FE8C_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The peripheral device does not return an
STX"
0018 FE8D_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The peripheral device does not return an
ETX"
0018 FE8E_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Block length does not agree with the
transmitted block length"
0018 FE8F_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The block ID is invalid"
0018 FE90_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Received DID does not agree with the
transmitted DID"
0018 FE91_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Wrong command specification"
0018 FE92_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The received acknowledge type is invalid"
0018 FE93_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Max no of repeat transmissions reached"
0018 FE94_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Max no of receive repeats has been
reached"
0018 FE95_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Monitoring time during transmission has
been exceeded"
0018 FE96_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Monitoring time during receive has been
exceeded"
0018 FE97_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Busy time from phys. device excceeded"
0018 FE98_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The protocol was cancelled"
0018 FE9C_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The length in TxData is 0"
0018 FE9D_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: CSCWISODLL could not be found in the
PATH"
0018 FE9E_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The CSCWISODLL could not be opened"
0018 FEE0_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The peripheral device did not answer"
0018 FEE1_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Peripheral device did not answer as
expected"
0018 FEE2_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The peripheral device is busy"
0018 FEE3_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Peripheral device did not answer as
expected"
0018 FEE4_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Max no. of repeat transmissions reached"
0018 FEE5_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Device asked for termination"
0018 FEE6_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Peripheral device did not answer"
0018 FEE7_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Response of device not completely
received"
0018 FEE8_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The header of the response is invalid"
0018 FEE9_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: DID does not agree with the transmitted
DID"
0018 FEEA_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: DID does not agree with the transmitted
device ID"
0018 FEEB_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Command spec. does not agree with the
transmitted command spec."
0018 FEEC_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The response of the device has not been
completely received"
0018 FEED_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: A cancel command has been called"
0018 FEEF_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: A cancel command has been called"
0018 FEF0_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The command could not be executed"
0018 FEF1_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The command was aborted by the user"
0018 FEF2_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: The command could not be executed"
0018 FEF3_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: A cancel command could not be
executed"
0018 FEF4_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Internal monitoring time exceeded"
0018 FEF5_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Internal error within the CSCWISODLL"
AA18 DEFA_W ?0912 80000000000000030 000DI01:38:00:00 "USB/CDM: DEFAULT_WARNING"
AA18 DEFA_E ?0912 80000000000000030 000DI01:38:00:00 "USB/CDM: DEFAULT_ERROR"
AA18 8000_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Unexpected descriptor was reported from USB
device"
AA18 8001_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Device not found"
AA18 8002_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Not enough memory available"

May 2011 213

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
AA18 8003_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: It was no endpoint found in the descriptor"
AA18 8004_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: The creation of the list of USB devices failed"
AA18 FE09_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: USB read command could not be executed in the
specified monitoring time"
AA18 FE0A_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: USB READ command is cancelled by the user"
AA18 FE89_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: The pointer pData is illegal"
AA18 FE9C_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: The length in DataSize is 0 (zero)"
AA18 0001_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: CRC error has been detected"
AA18 0002_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Bit stuffing error has been detected"
AA18 0003_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: DATA toggle mismatch has been detected"
AA18 0004_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: STALLPID has been detected, error is reported
by the USB host controller"
AA18 0005_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: USB device is not responding, error is reported
by the USB host"
AA18 0006_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: PID check has failed, error is reported by the
USB host controller"
AA18 0007_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Unexpected PID detected, error is reported by
the USB host"
AA18 0008_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Data overrun error detected, error is reported by
the USB host"
AA18 0009_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Data underrun error detected, error is reported
by the USB host"
AA18 000A_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Error code is reserved by the USB host controller
driver"
AA18 000B_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Error code is reserved by the USB host controller
driver"
AA18 000C_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Buffer overrun has been detected, error is
reported by the USB host"
AA18 000D_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Buffer underrun has been detected, error is
reported by the USB host"
AA18 000F_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Buffer was not accessed, error is reported by the
USB host"
AA18 0010_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: FIFO error has been detected, PCI bus latency
was too long"
AA18 0011_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: XACT error has been detected, error is reported
by the USB host"
AA18 0012_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Device is babbling, data transfer phase exceeds
the USB frame length"
AA18 0013_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Data buffer error has been detected, error is
reported by the USB host"
AA18 0030_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Endpoint has been halted by the USB bus driver
USBD"
AA18 0100_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Memory allocation attempt has failed, error is
reported by the USB bus"
AA18 0200_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Invalid URB function code has been passed,
error is reported by the USB"
AA18 0300_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Invalid parameter has been passed, error is
reported by the USB bus"
AA18 0400_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: There are data transfer requests pending for the
device"
AA18 0500_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Request has failed, error is reported by the USB
bus driver USBD"
AA18 0600_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Invalid pipe handle has been passed, error is
reported by the USB bus"
AA18 0700_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: There is not enough bandwidth available, error is
reported by the USB bus"
AA18 0800_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Internal host controller error has been detected"
AA18 0900_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Short transfer has been detected, error is
reported by the USB bus"
AA18 0A00_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Bad start frame has been specified, error is
reported by the USB bus"
AA18 0B00_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Asynchronous request has failed, error is
reported by the USB bus driver"
AA18 0C00_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: USB frame control is currently owned, error is
reported by the USB bus"
AA18 0D00_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: USB frame control is currently not owned, error
is reported by the USB"

214 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
AA18 0E00_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Operation is not supported, error is reported by
the USB bus driver"
AA18 0F00_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Invalid configuration descriptor was reported by
the device"
AA18 1000_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Operation has failed, error is reported by the
USBIO driver"
AA18 1001_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Invalid input buffer has been passed to an IOCTL
operation"
AA18 1002_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Invalid output buffer has been passed to an
IOCTL operation"
AA18 1003_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: There is not enough system memory available to
complete the operation"
AA18 1004_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: There are read or write requests pending, error
is reported by the USBIO"
AA18 1005_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: USB device is already configured, error is
reported by the USBIO"
AA18 1006_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: The USB device is not configured, error is
reported by the USBIO driver"
AA18 1007_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: There are open pipes, error is reported by the
USBIO driver"
AA18 1008_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Either the handle is already bound to a pipe"
AA18 1009_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Handle is not bound to a pipe, error is reported
by the USBIO driver"
AA18 100A_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: USB device has been removed from the system"
AA18 100B_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Specified control code is not supported"
AA18 100C_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Operation has been timed out, error is reported
by the USBIO driver"
AA18 100D_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Invalid recipient has been specified"
AA18 100E_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Either an invalid request type has been
specified"
AA18 100F_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Invalid IOCTL code has been specified, error is
reported by the USBIO"
AA18 1010_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Direction of the data transfer request is not
supported by that pipe"
AA18 1011_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Number of asynchronous data packets specified
in an asynchronous read"
AA18 1012_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Memory resources are exhausted. This error is
reported by the USBIO driver"
AA18 1013_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: The specified pipe was not found in the current
configuration"
AA18 1014_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: An invalid asynchronous data packet has been
specified"
AA18 1015_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: There are not enough system resources to
complete the operation"
AA18 1016_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Specified interface was not found in the current
configuration"
AA18 1017_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Operation cannot be executed while the USB
device is in the current state"
AA18 1018_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Invalid parameter has been specified with an
IOCTL operation"
AA18 1019_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Evaluation interval of the USBIO DEMO version
has expired"
AA18 101A_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Invalid power state has been specified"
AA18 101B_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Device has entered a power down state"
AA18 101C_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: API version reported by the USBIO driver does
not match"
AA18 101D_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Set configuration operation has failed, error is
reported by the USBIO"
AA18 1080_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Operation has failed due to a restriction of the
USBIO LIGHT version"
AA18 1081_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Operation has failed due to a restriction of the
USBIO LIGHT version"
AA18 1082_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Operation has failed due to a restriction of the
USBIO LIGHT version"
AA18 1083_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Operation has failed due to a restriction of the
USBIO LIGHT version"
AA18 1084_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Operation has failed due to a restriction of the
USBIO LIGHT version"

May 2011 215

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
AA18 1085_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Operation has failed due to a restriction of the
USBIO LIGHT version"
AA18 1086_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: The operation has failed due to a restriction of
the USBIO LIGHT version"
AA18 1087_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Operation has failed due to a restriction of the
USBIO LIGHT version"
AA18 1100_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: The specified device object does not exist"
AA18 1102_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Device object was opened, there is no valid
handle to execute the operation"
AA18 1104_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Enumeration of the specified devices has failed"
AA18 1105_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Invalid parameter has been passed to a function"
AA18 1106_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Library setupapi.dll could not be loaded"
AA18 2000_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Set configuration request has failed"
AA18 3000_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Buffer is too small, error is reported by the USB
bus driver USBD"
AA18 4000_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Interface was not found, error is reported by the
USB bus driver USBD"
AA18 5000_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Invalid pipe flags have been specified"
AA18 6000_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: Operation has been timed out, error is reported
by the USB bus driver"
AA18 7000_E ?0912 80000000000000000 000DI01:38:00:00 "USB/CDM: USB device is gone, error is reported by the USB
bus driver USBD"
001D DEFA_W ?0912 80000000000000030 000DI01:38:39:31 "DISPENSER NG: DEFAULT_WARNING"
001D DEFA_E ?0912 80000000000000030 000DI01:38:39:31 "DISPENSER NG: DEFAULT_ERROR"
001D 1000_E ?3002,?0B 80000000000000000 000DI01:3F:00:01, "DISPENSER FL: Context error, CDM has received an invalid
75,@04,@ ,8000000000000000 000DI01:3F:31p37, command"
00 0,904,900 000DR01:3A:41:40
,000DR01:3A:37:4
1
001D 1001_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER FL: No response from the CDM"
001D 1010_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER FL: CDM electronics faulty"
001D 1011_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER FL: No firmware in CDM"
001D 1012_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER FL: CDM not completely inserted"
001D 1013_E ?0782 80000000000000000 000DI01:3D:37:38 "DISPENSER FL: Max number of retracts reached"
001D 1014_E ?0353 80000000000000000 000DI01:39:00:00 "DISPENSER FL: Minimum configuration not reached."
001D 1018_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: Note jam during dispensing"
001D 1019_E ?3002,?03 80000000000000000 000DI01:3F:00:01, "DISPENSER FL: Money jam in the output transport"
32,@04,@ ,8000000000000000 000DI01:3E:33:33,
00 0,904,900 000DR01:3A:41:40
,000DR01:23:00:00
001D 1020_E ?0342 80000000000000000 000DI01:3E:33:33 "DISPENSER FL: Single reject switch faulty/blocked"
001D 1021_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER FL: Measuring station faulty"
001D 1022_E ?0602,?0B 80000000000000004 000DI01:3A:36:30, "DISPENSER FL: Photosensor amplifier faulty"
75,@04,@ ,8000000000000000 000DI01:3F:31p37,
00 4,904,900 000DR01:3A:38:41
,000DR01:3A:39:4
1
001D 1023_E ?0602 80000000000000000 000DI01:3B:35:39 "DISPENSER FL: Bundle reject switch faulty"
001D 1024_E ?0342,?0B 80000000000000004 000DI01:3F:33:34, "DISPENSER FL: Reject/retract drive faulty/blocked"
75,@04,@ ,8000000000000000 000DI01:3F:31p37,
00 4,904,900 000DR01:3A:38:41
,000DR01:3A:39:4
1
001D 1025_E ?0592,?0B 80000000000000001 000DI01:3B:35:39, "DISPENSER FL: Dispensing drive faulty"
75,@04,@ ,8000000000000000 000DI01:3F:31p37,
00 1,904,900 000DR01:3A:38:41
,000DR01:3A:39:4
1
001D 1026_E ?0382,?0B 80000000000000030 000DI01:3A:33:38, "DISPENSER FL: Collecting tray defect"
75,@04,@ ,8000000000000003 000DI01:3F:31p37,
00 0,904,900 000DR01:3A:38:41
,000DR01:3A:39:4
1
001D 1028_E ?3002,?0B 80000000000000008 000DI01:3F:00:01, "DISPENSER FL: Money slot/shutter jammed or cannot be
75,@04,@ ,8000000000000000 000DI01:3F:31p37, opened"
00 8,904,900 000DR01:3A:41:40
,000DR01:3A:37:4
1

216 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001D 1029_E ?3002,?0B 80000000000000008 000DI01:3F:00:01, "DISPENSER FL: Manipulation during delivery"
75,@04,@ ,8000000000000000 000DI01:3F:31p37,
00 8,904,900 000DR01:23:00:01,
000DR01:3A:37:41
001D 1031_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER FL: Too many bundle rejects (cassette 1)"
001D 1032_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER FL: Too many bundle rejects (cassette 2)"
001D 1033_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER FL: Too many bundle rejects (cassette 3)"
001D 1034_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER FL: Too many bundle rejects (cassette 4)"
001D 1035_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER FL: Too many bundle rejects (cassette 5)"
001D 1036_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER FL: Too many bundle rejects (cassette 6)"
001D 1041_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: Note extraction impossible (cassette 1)"
001D 1042_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: Note extraction impossible (cassette 2)"
001D 1043_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: Note extraction impossible (cassette 3)"
001D 1044_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: Note extraction impossible (cassette 4)"
001D 1045_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: Note extraction impossible (cassette 5)"
001D 1046_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: Note extraction impossible (cassette 6)"
001D 1051_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER FL: Too many bad notes (cassette 1)"
001D 1052_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER FL: Too many bad notes (cassette 2)"
001D 1053_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER FL: Too many bad notes (cassette 3)"
001D 1054_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER FL: Too many bad notes (cassette 4)"
001D 1055_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER FL: Too many bad notes (cassette 5)"
001D 1056_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER FL: Too many bad notes (cassette 6)"
001D 1061_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: EE-PROM error (cassette 1)"
001D 1062_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: EE-PROM error (cassette 2)"
001D 1063_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: EE-PROM error (cassette 3)"
001D 1064_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: EE-PROM error (cassette 4)"
001D 1065_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: EE-PROM error (cassette 5)"
001D 1066_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: EE-PROM error (cassette 6)"
001D 1070_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER FL: Photosensor measuring station soiled"
001D 1071_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: Dispenser sensor soiled (cassette 1)"
001D 1072_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: Dispenser sensor soiled (cassette 2)"
001D 1073_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: Dispenser sensor soiled (cassette 3)"
001D 1074_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: Dispenser sensor soiled (cassette 4)"
001D 1075_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: Dispenser sensor soiled (cassette 5)"
001D 1076_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: Dispenser sensor soiled (cassette 6)"
001D 1081_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: Empty sensor soiled (cassette 1)"
001D 1082_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: Empty sensor soiled (cassette 2)"
001D 1083_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: Empty sensor soiled (cassette 3)"
001D 1084_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: Empty sensor soiled (cassette 4)"
001D 1085_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: Empty sensor soiled (cassette 5)"
001D 1086_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER FL: Empty sensor soiled (cassette 6)"
001D 1090_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER FL: Photosensor L1 soiled"
001D 1091_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER FL: Photosensor L18 soiled"
001D 1093_E ?0602,?0B 80000000000000000 000DI01:3A:36:30, "DISPENSER FL: Photosensor L21 soiled"
75,@04,@ ,8000000000000000 000DI01:3F:31p37,
00 0,904,900 000DR01:3A:38:41
,000DR01:3A:39:4
1
001D 1098_E ?0602,?0B 80000000000000000 000DI01:3A:36:30, "DISPENSER FL: Photosensor L27 soiled"
75,@04,@ ,8000000000000000 000DI01:3F:31p37,
00 0,904,900 000DR01:3A:38:41
,000DR01:3A:39:4
1
001D 1099_E ?0602,?0B 80000000000000000 000DI01:3A:36:30, "DISPENSER FL: Photosensor L28 soiled"
75,@04,@ ,8000000000000000 000DI01:3F:31p37,
00 0,904,900 000DR01:3A:38:41
,000DR01:3A:39:4
1
001D 1800_E ?3002,?0B 80000000000000008 000DI01:3F:00:01, "DISPENSER V4: Context error, CDM has received an
75,@04,@ ,8000000000000000 000DI01:3F:31p37, invalid command"
00 8,904,900 000DR01:3A:41:40
,000DR01:3A:37:4
1
001D 1801_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER V4: No response from CDM"
001D 1805_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER V4: Communication problem with the chip card
controller"

May 2011 217

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001D 1806_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER V4: Communication problem with the chip
card"
001D 1807_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER V4: Hardware configuration not accepted"
001D 1808_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER V4: Communication problem with the EE-
PROM collector"
001D 1809_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER V4: Service switch open, please insert CDM-
V4 completely"
001D 1810_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER V4: CMD electronics faulty"
001D 1811_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER V4: Software missing in the CMD"
001D 1812_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER V4: CMD has not been inserted completely"
001D 1813_E ?0782,?07 80000000000000000 000DI01:3D:37:38, "DISPENSER V4: The maximal number of retracts has been
82,@04,@ ,8000000000000000 000DI01:3D:37:38, reached"
00 0,904,900 000DR01:3A:41:40
,000DR01:23:00:00
001D 1814_E ?0353 80000000000000000 000DI01:39:00:00 "DISPENSER V4: Minimum configuration missing"
001D 1817_E ?0332,?03 80000000000000000 000DI01:3E:33:33, "DISPENSER V4: Gripper belt drive faulty"
32,@04,@ ,8000000000000000 000DI01:3E:33:33,
00 0,904,900 000DR01:3A:41:40
,000DR01:23:00:00
001D 1818_E ?0342 80000000000000000 000DI01:3B:36:37 "DISPENSER V4: Note jam during dispensing"
001D 1819_E ?3002,?03 80000000000000000 000DI01:3F:00:01, "DISPENSER V4: Gripper transport defective or blocked"
32,@04,@ ,8000000000000000 000DI01:3E:33:33,
00 0,904,900 000DR01:3A:41:40
,000DR01:23:00:00
001D 1820_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER V4: Single reject switch faulty/blocked"
001D 1821_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER V4: Measuring station faulty"
001D 1822_E ?0602,?0B 80000000000000000 000DI01:3A:36:30, "DISPENSER V4: Photosensor amplifier faulty"
75,@04,@ ,8000000000000000 000DI01:3F:31p37,
00 0,904,900 000DR01:3A:38:41
,000DR01:3A:39:4
1
001D 1823_E ?0602,?0B 80000000000000000 000DI01:3A:36:30, "DISPENSER V4: Circle switch faulty/blocked"
75,@04,@ ,8000000000000000 000DI01:3F:31p37,
00 0,904,900 000DR01:3A:38:41
,000DR01:3A:39:4
1
001D 1824_E ?0342,?0B 80000000000000004 000DI01:3F:33:34, "DISPENSER V4: Reject/retract drive faulty/blocked"
75,@04,@ ,8000000000000000 000DI01:3F:31p37,
00 4,904,900 000DR01:3A:38:41
,000DR01:3A:39:4
1
001D 1825_E ?0592,?0B 80000000000000001 000DI01:3B:35:39, "DISPENSER V4: Dispensing drive faulty/blocked"
75,@04,@ ,8000000000000000 000DI01:3F:31p37,
00 1,904,900 000DR01:3A:38:41
,000DR01:3A:39:4
1
001D 1826_E ?0382,?0B 80000000000000030 000DI01:3A:33:38, "DISPENSER V4: Stacker drive faulty /blocked"
75,@04,@ ,8000000000000003 000DI01:3F:31p37,
00 0,904,900 000DR01:3A:38:41
,000DR01:3A:39:4
1
001D 1828_E ?3002,?0B 80000000000000008 000DI01:3F:00:01, "DISPENSER V4: Money slot/shutter jammed or cannot be
75,@04,@ ,8000000000000000 000DI01:3F:31p37, opened"
00 8,904,900 000DR01:3A:41:40
,000DR01:3A:37:4
1
001D 1829_E ?3002,?0B 80000000000000008 000DI01:3F:00:01, "DISPENSER V4: Manipulation during delivery"
75,@04,@ ,8000000000000000 000DI01:3F:31p37,
00 8,904,900 000DR01:23:00:01,
000DR01:3A:37:41
001D 1831_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER V4: Too many bundle rejects (cassette 1)"
001D 1832_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER V4: Too many bundle rejects (cassette 2)"
001D 1833_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER V4: Too many bundle rejects (cassette 3)"
001D 1834_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER V4: Too many bundle rejects (cassette 4)"
001D 1835_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER V4: Too many bundle rejects (cassette 5)"
001D 1836_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER V4: Too many bundle rejects (cassette 6)"
001D 1841_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Note extraction impossible (cassette 1)"
001D 1842_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Note extraction impossible (cassette 2)"
001D 1843_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Note extraction impossible (cassette 3)"
001D 1844_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Note extraction impossible (cassette 4)"

218 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001D 1845_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Note extraction impossible (cassette 5)"
001D 1846_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Note extraction impossible (cassette 6)"
001D 1851_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER V4: Too many bad notes (cassette 1)"
001D 1852_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER V4: Too many bad notes (cassette 2)"
001D 1853_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER V4: Too many bad notes (cassette 3)"
001D 1854_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER V4: Too many bad notes (cassette 4)"
001D 1855_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER V4: Too many bad notes (cassette 5)"
001D 1856_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER V4: Too many bad notes (cassette 6)"
001D 1861_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Cassette 1 faulty"
001D 1862_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Cassette 2 faulty"
001D 1863_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Cassette 3 faulty"
001D 1864_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Cassette 4 faulty"
001D 1865_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Cassette 5 faulty"
001D 1866_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Cassette 6 faulty"
001D 1870_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER V4: Photosensors measuring station soiled"
001D 1871_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Dispenser sensor soiled (cassette 1)"
001D 1872_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Dispenser sensor soiled (cassette 2)"
001D 1873_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Dispenser sensor soiled (cassette 3)"
001D 1874_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Dispenser sensor soiled (cassette 4)"
001D 1875_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Dispenser sensor soiled (cassette 5)"
001D 1876_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Dispenser sensor soiled (cassette 6)"
001D 1881_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Empty sensor soiled (cassette 1)"
001D 1882_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Empty sensor soiled (cassette 2)"
001D 1883_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Empty sensor soiled (cassette 3)"
001D 1884_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Empty sensor soiled (cassette 4)"
001D 1885_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Empty sensor soiled (cassette 5)"
001D 1886_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER V4: Empty sensor soiled (cassette 6)"
001D 1890_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER V4: Photosensor L1 soiled"
001D 1891_E ?0602,?0B 80000000000000000 000DI01:3A:36:30, "DISPENSER V4: Photosensor L18 soiled"
75,@04,@ ,8000000000000000 000DI01:3F:31p37,
00 0,904,900 000DR01:3A:38:41
,000DR01:3A:39:4
1
001D 1893_E ?0602,?0B 80000000000000000 000DI01:3A:36:30, "DISPENSER V4: Control tray single reject L2 soiled"
75,@04,@ ,8000000000000000 000DI01:3F:31p37,
00 0,904,900 000DR01:3A:38:41
,000DR01:3A:39:4
1
001D 1895_E ?0602,?0B 80000000000000000 000DI01:3A:36:30, "DISPENSER V4: Money taken light barrier L26/L27 soiled"
75,@04,@ ,8000000000000000 000DI01:3F:31p37,
00 0,904,900 000DR01:3A:38:41
,000DR01:3A:39:4
1
001D 1898_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER V4: Withdrawal photosensor L27 soiled"
001D 1899_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER V4: Output photosensor L28 soiled"
001D 189A_E ?0602,?0B 80000000000000000 000DI01:3A:36:30, "DISPENSER V4: Light barrier of bundle back edge control
75,@04,@ ,8000000000000000 000DI01:3F:31p37, (presenter) soiled"
00 0,904,900 000DR01:3A:38:41
,000DR01:3A:39:4
1
001D 189D_E ?0602,?0B 80000000000000000 000DI01:3A:36:30, "DISPENSER V4: Light barrier L2 of reject bin soiled"
75,@04,@ ,8000000000000000 000DI01:3F:31p37,
00 0,904,900 000DR01:3A:38:41
,000DR01:3A:39:4
1
001D 189E_E ?0602,?0B 80000000000000000 000DI01:3A:36:30, "DISPENSER V4: Light barrier L3 of reject bin soiled"
75,@04,@ ,8000000000000000 000DI01:3F:31p37,
00 0,904,900 000DR01:3A:38:41
,000DR01:3A:39:4
1
001D 4001_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: No response from the CDM"
001D 4010_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: CDM electronics faulty"
001D 4011_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Software missing in the CDM"
001D 4012_E ?0913 80000000000000000 000DI01:39:00:00 "DISPENSER NG: CDM has not been inserted completely"
001D 4013_E ?0782 80000000000000000 000DI01:3D:37:38 "DISPENSER NG: Max number of retracts reached"
001D 4018_E ?5332 80000000000000000 000DI01:3E:33:33 "DISPENSER NG: Note jam during dispensing"
001D 4020_E ?0372 80000000000000000 000DI01:3A:33:37 "DISPENSER NG: Single reject switch faulty/blocked"

May 2011 219

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001D 4021_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Measuring station faulty"
001D 4022_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor amplifier faulty"
001D 4025_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Dispensing drive faulty/blocked"
001D 4026_E @00 900 000DR01:3A:31:41 "DISPENSER NG: Switching dispensing/transport"
001D 4100_E ?0363 80000000000000000 000DI01:3F:33:36 "DISPENSER NG: Cassette unknown, missing, reinserted"
001D 4114_E ?0793 80000000000000000 000DI01:3D:37:39 "DISPENSER NG: Reject cassette missing"
001D 4119_E ?0332 80000000000000000 000DI01:3E:33:33 "DISPENSER NG: Money jam in the output transport"
001D 4123_E ?0342 80000000000000000 000DI01:3F:33:34 "DISPENSER NG: Bundle reject switch faulty/blocked"
001D 4124_E ?0342 80000000000000000 000DI01:3F:33:34 "DISPENSER NG: Reject/retract drive faulty/blocked"
001D 4128_E @00 900 000DR01:23:00:00 "DISPENSER NG: Shutter cannot be opened/defect"
001D 4129_E @04 904 000DR01:23:00:01 "DISPENSER NG: Manipulation during delivery"
001D 4200_E @04 904 000DR01:23:00:01 "DISPENSER NG: Shutter has been blocked"
001D 4214_E ?0793 80000000000000000 000DI01:3D:37:39 "DISPENSER NG: Reject cassette not logged on"
001D 4219_E ?0342 80000000000000000 000DI01:3E:33:34 "DISPENSER NG: Money jam in the output transport"
001D 4223_E @04 904 000DR01:23:00:01 "DISPENSER NG: Bundle reject switch faulty/blocked"
001D 4224_E @04 904 000DR01:23:00:01 "DISPENSER NG: Reject/retract drive faulty/blocked"
001D 4228_E @04 904 000DR01:23:00:01 "DISPENSER NG: Shutter undefined"
001D 4229_E @04 904 000DR01:23:00:01 "DISPENSER NG: Manipulation in withdrawal position"
001D 4300_E ?3000 80000000000000000 000DI01:3F:00:01 "DISPENSER NG: Command cannot be executed while
Shutter open"
001D 4314_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Cash-out cassette(s) missing"
001D 4319_E @00 900 000DR01:3A:31:41 "DISPENSER NG: Money jam in the output transport"
001D 4328_E @04 904 000DR01:23:00:01 "DISPENSER NG: Shutter cannot be closed/undefined"
001D 4329_E @04 904 000DR01:23:00:01 "DISPENSER NG: Manipulation during retract"
001D 4400_E ?1000 80000000000000000 000DI01:3E:01:01 "DISPENSER NG: Command cannot be executed while
Shutter undefined"
001D 4414_E ?0B73 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: No cash-out cassette(s) logged on"
001D 4419_E @04 904 000DR01:23:00:01 "DISPENSER NG: Money jam in the output transport"
001D 4428_E @04 904 000DR01:23:00:01 "DISPENSER NG: Shutter undefined during retract"
001D 4429_E @00 900 000DR01:23:00:00 "DISPENSER NG: Manipulation during delivery"
001D 4500_E @04 904 000DR01:23:00:01 "DISPENSER NG: Manipulation at cash-out photosensor"
001D 4519_E @04 904 000DR01:23:00:01 "DISPENSER NG: Money jam in the output transport"
001D 4529_E @04 904 000DR01:23:00:01 "DISPENSER NG: Manipulation during delivery"
001D 4600_E ?0332 80000000000000000 000DI01:3E:33:33 "DISPENSER NG: Note paths blocked"
001D 4619_E @04 904 000DR01:3E:35:45 "DISPENSER NG: Money jam in the output transport"
001D 4629_E @04 904 000DR01:23:00:01 "DISPENSER NG: Manipulation in withdrawal position"
001D 4700_E ?0782 80000000000000000 000DI01:3D:37:38 "DISPENSER NG: Max number of retracts reached"
001D 4719_E @04 904 000DR01:3E:35:45 "DISPENSER NG: Money jam in the output transport"
001D 4729_E @04 904 000DR01:23:00:01 "DISPENSER NG: Manipulation during retract"
001D 4800_E ?0342 80000000000000000 000DI01:3F:33:34 "DISPENSER NG: Single reject switch faulty"
001D 4829_E @00 900 000DR01:23:00:00 "DISPENSER NG: Manipulation during delivery"
001D 4900_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Self-test activated"
001D 4919_E @04 904 000DR01:23:00:01 "DISPENSER NG: Photosensor covered during withdrawal"
001D 4A00_E ?3000 80000000000000000 000DI01:39:00:00 "DISPENSER NG: The jam was not eliminated effectively"
001D 4A19_E @04 904 000DR01:23:00:01 "DISPENSER NG: Photosensor covered during withdrawal"
001D 4B00_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Cash-out cassette missing"
001D 4B19_E @04 904 000DR01:23:00:01 "DISPENSER NG: Photosensor covered during retract"
001D 4C19_E ?0592 80000000000000000 000DI01:3B:35:39 "DISPENSER NG: Motor defect"
001D 4D00_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Cassette is empty"
001D 4E00_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Cassette or dispensing sensor defect"
001D 4F00_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Cassette becomes empty during
dispensing procedure"
001D 8031_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER NG: Too many bundle rejects (cassette 1)"
001D 8032_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER NG: Too many bundle rejects (cassette 2)"
001D 8033_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER NG: Too many bundle rejects (cassette 3)"
001D 8034_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER NG: Too many bundle rejects (cassette 4)"
001D 8035_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER NG: Too many bundle rejects (cassette 5)"
001D 8036_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER NG: Too many bundle rejects (cassette 6)"
001D 8041_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Note extraction impossible (cassette 1)"
001D 8042_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Note extraction impossible (cassette 2)"
001D 8043_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Note extraction impossible (cassette 3)"
001D 8044_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Note extraction impossible (cassette 4)"
001D 8045_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Note extraction impossible (cassette 5)"

220 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001D 8046_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Note extraction impossible (cassette 6)"
001D 8061_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Cassette 1 faulty"
001D 8062_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Cassette 2 faulty"
001D 8063_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Cassette 3 faulty"
001D 8064_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Cassette 4 faulty"
001D 8065_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Cassette 5 faulty"
001D 8066_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Cassette 6 faulty"
001D 8070_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor measuring station soiled"
001D 8071_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Dispenser sensor soiled (cassette 1)"
001D 8072_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Dispenser sensor soiled (cassette 2)"
001D 8073_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Dispenser sensor soiled (cassette 3)"
001D 8074_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Dispenser sensor soiled (cassette 4)"
001D 8075_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Dispenser sensor soiled (cassette 5)"
001D 8076_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Dispenser sensor soiled (cassette 6)"
001D 8081_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Empty sensor soiled (cassette 1)"
001D 8082_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Empty sensor soiled (cassette 2)"
001D 8083_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Empty sensor soiled (cassette 3)"
001D 8084_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Empty sensor soiled (cassette 4)"
001D 8085_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Empty sensor soiled (cassette 5)"
001D 8086_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Empty sensor soiled (cassette 6)"
001D 8090_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L1 soiled"
001D 8091_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L18 soiled"
001D 8092_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L19 soiled"
001D 8093_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L21 soiled"
001D 8094_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L22 soiled"
001D 8095_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L26 soiled"
001D 8096_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L33 soiled"
001D 8097_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L35 soiled"
001D 8098_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L27 soiled"
001D 8099_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L28 soiled"
001D 809A_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L29 soiled"
001D 809B_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L36 soiled"
001D 809C_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L37 soiled"
001D 8151_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER NG: Too many double notes (cassette 1)"
001D 8152_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER NG: Too many double notes (cassette 2)"
001D 8153_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER NG: Too many double notes (cassette 3)"
001D 8154_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER NG: Too many double notes (cassette 4)"
001D 8155_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER NG: Too many double notes (cassette 5)"
001D 8156_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER NG: Too many double notes (cassette 6)"
001D 8251_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER NG: Too many bad notes (cassette 1)"
001D 8252_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER NG: Too many bad notes (cassette 2)"
001D 8253_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER NG: Too many bad notes (cassette 3)"
001D 8254_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER NG: Too many bad notes (cassette 4)"
001D 8255_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER NG: Too many bad notes (cassette 5)"
001D 8256_E ?5A12 80000000000000000 000DI01:3F:30p31 "DISPENSER NG: Too many bad notes (cassette 6)"
001D 8300_E ?0332 80000000000000000 000DI01:3B:33:33 "DISPENSER NG: Bills left in stacker after output to diverter"
001D 8312_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: CDM has not been inserted completely"
001D 8313_E ?0332 80000000000000000 000DI01:3B:33:33 "DISPENSER NG: Cash left in diverter after reset/booting"
001D 8314_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Dispensing not possible"
001D 8315_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER NG: Command could not be executed"
001D 8316_E ?0633 80000000000000000 000DI01:39:36:33 "DISPENSER NG: Command could not be executed"
001D 8318_E ?0332 80000000000000000 000DI01:3E:33:33 "DISPENSER NG: Note jam during dispense operation"
001D 8319_E @04 904 000DR01:23:00:01 "DISPENSER NG: Note jam in the output transport"
001D 8320_E ?0342 80000000000000000 000DI01:3F:33:34 "DISPENSER NG: Single reject switch faulty/blocked"
001D 8321_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Measuring station faulty"
001D 8322_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor amplifier faulty"
001D 8323_E ?0342 80000000000000000 000DI01:3F:33:34 "DISPENSER NG: Bundle reject switch faulty/blocked"
001D 8324_E ?0342 80000000000000000 000DI01:3F:33:34 "DISPENSER NG: Reject/retract drive faulty/blocked"
001D 8325_E ?0332 80000000000000000 000DI01:3E:33:33 "DISPENSER NG: Dispensing drive faulty/blocked"
001D 8326_E ?0592 80000000000000000 000DI01:3B:35:39 "DISPENSER NG: Switching dispensing/transport faulty"
001D 8328_E ?0372 80000000000000000 000DI01:3B:33:37 "DISPENSER NG: Diverter does not reach the end position"
001D 8329_E ?0332 80000000000000000 000DI01:3E:33:33 "DISPENSER NG: Bills jammed in stacker, under output
photosensor"

May 2011 221

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001D 8331_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER NG: Too many bundle rejects (casette 1)"
001D 8332_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER NG: Too many bundle rejects (casette 2)"
001D 8333_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER NG: Too many bundle rejects (casette 3)"
001D 8334_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER NG: Too many bundle rejects (casette 4)"
001D 8335_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER NG: Too many bundle rejects (casette 5)"
001D 8336_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER NG: Too many bundle rejects (casette 6)"
001D 8341_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Note extraction impossible (cassette 1)"
001D 8342_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Note extraction impossible (cassette 2)"
001D 8343_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Note extraction impossible (cassette 3)"
001D 8344_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Note extraction impossible (cassette 4)"
001D 8345_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Note extraction impossible (cassette 5)"
001D 8346_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Note extraction impossible (cassette 6)"
001D 8351_E ?5A12 80000000000000000 000DI01:3F:30:31 "DISPENSER NG: Too many double notes (cassette 1)"
001D 8352_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER NG: Too many double notes (cassette 2)"
001D 8353_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER NG: Too many double notes (cassette 3)"
001D 8354_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER NG: Too many double notes (cassette 4)"
001D 8355_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER NG: Too many double notes (cassette 5)"
001D 8356_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER NG: Too many double notes (cassette 6)"
001D 8361_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Cassette 1 faulty"
001D 8362_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Cassette 2 faulty"
001D 8363_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Cassette 3 faulty"
001D 8364_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Cassette 4 faulty"
001D 8365_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Cassette 5 faulty"
001D 8366_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Cassette 6 faulty"
001D 8370_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensors measuring station soiled"
001D 8371_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Dispenser sensor soiled (cassette 1)"
001D 8372_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Dispenser sensor soiled (cassette 2)"
001D 8373_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Dispenser sensor soiled (cassette 3)"
001D 8374_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Dispenser sensor soiled (cassette 4)"
001D 8375_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Dispenser sensor soiled (cassette 5)"
001D 8376_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Dispenser sensor soiled (cassette 6)"
001D 8381_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Empty sensor soiled (cassette 1)"
001D 8382_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Empty sensor soiled (cassette 2)"
001D 8383_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Empty sensor soiled (cassette 3)"
001D 8384_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Empty sensor soiled (cassette 4)"
001D 8385_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Empty sensor soiled (cassette 5)"
001D 8386_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER NG: Empty sensor soiled (cassette 6)"
001D 8390_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L1 soiled"
001D 8391_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L18 soiled"
001D 8392_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L19 soiled"
001D 8393_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L21 soiled"
001D 8394_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L22 soiled"
001D 8395_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L26 soiled"
001D 8396_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L33 soiled"
001D 8397_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L35 soiled"
001D 8398_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L27 soiled"
001D 8399_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L28 soiled"
001D 839A_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L29 soiled"
001D 839B_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L36 soiled"
001D 839C_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER NG: Photosensor L37 soiled"
001D 8400_E ?0332 80000000000000000 000DI01:3B:33:37 "DISPENSER NG: Banknotes left in the stacker after output"
001D 8419_E @00 900 000DR01:3A:37:41 "DISPENSER NG: Note jam in the output transport"
001D A000_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER NG: Wrong command"
001D A100_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER NG: Wrong command"
001D A200_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER NG: Programming error"
001D FE38_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Communication problem"
001D FE50_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER NG: Communication problem"
001D FFFF_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER NG: Extended error code not computed"
001D DEFA_W ?0912 80000000000000030 000DI01:38:39:31 "DISPENSER CRS: DEFAULT_WARNING"
001D DEFA_E ?0912 80000000000000030 000DI01:38:39:31 "DISPENSER CRS: DEFAULT_ERROR"
001D 3000_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER CRS: Context error"
001D 3010_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER CRS: No response from CRS"

222 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001D 3016_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER CRS: CRS electronics faulty"
001D 3020_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER CRS: CRS communication problem"
001D 3025_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER CRS: CRS communication problem"
001D 3100_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER CRS: CRS controller error"
001D 3101_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER CRS: CRS controller error"
001D 3105_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER CRS: CRS controller error"
001D 3106_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER CRS: CRS controller error"
001D 3110_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER CRS: Software missing in CRS"
001D 3120_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER CRS: CRS has not been inserted completely"
001D 3125_E ?1000 80000000000000000 000DI01:3E:01:01 "DISPENSER CRS: Front or rear door not closed"
001D 3135_E ?0782 80000000000000000 000DI01:3D:37:38 "DISPENSER CRS: Max number of retracts reached"
001D 3136_E ?3000 80000000000000000 000DI01:3F:00:01 "DISPENSER CRS: Device lock after jam"
001D 3137_E A400000 :4000 000DP01:3E:42:40 "DISPENSER CRS: CashIn box for level 3 notes overfilled"
001D 3140_E ?0353 ;0000000000000000 000DI01:39:00:00 "DISPENSER CRS: Minimum configuration cash-out not
reached."
001D 3145_E A400000 "DISPENSER CRS: 000DP01:3E:42:40 "DISPENSER CRS: Minimum configuration cash-in not
Minimum configu- reached."
ration cash-out not
reached."
001D 3146_E A400000 :4000 000DP01:3E:42:40 "DISPENSER CRS: Minimum configuration BIM not
reached."
001D 3170_E A400000 :4000 000DP01:3E:42:40 "DISPENSER CRS: Money jam during cash-in"
001D 3171_E A400000 :4000 000DP01:3E:42:40 "DISPENSER CRS: Money jam during cash-in"
001D 3175_E A400000 :4000 000DP01:3E:42:40 "DISPENSER CRS: Money jam during cash-in"
001D 3176_E A400000 :4000 000DP01:3E:42:40 "DISPENSER CRS: Money jam during cash-in"
001D 3178_E A400000 :4000 000DP01:3E:42:40 "DISPENSER CRS: Money jam during cash-in"
001D 3179_E A400000 :4000 000DP01:3E:42:40 "DISPENSER CRS: Money jam during cash-in"
001D 3180_E ?0332 :4000 000DI01:3E:33:33 "DISPENSER CRS: Money jam during cash-out"
001D 3181_E ?0332 80000000000000000 000DI01:3E:33:33 "DISPENSER CRS: Money jam during cash-out"
001D 3182_E ?0332 80000000000000000 000DI01:3E:33:33 "DISPENSER CRS: Money jam during reject/retract"
001D 3185_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Note jam during cash-out"
001D 3186_E ?0332 80000000000000000 000DI01:3E:33:33 "DISPENSER CRS: Money jam during bundle reject"
001D 3187_E ?0332 80000000000000000 000DI01:3E:33:33 "DISPENSER CRS: Money jam during retract"
001D 3200_E A480000 80000000000000000 000DP01:3D:50:7F "DISPENSER CRS: Switch cash-in cassette 1 faulty"
001D 3201_E A480000 :4800 000DP01:3D:50:7F "DISPENSER CRS: Switch cash-in cassette 2 faulty"
001D 3202_E A480000 :4800 000DP01:3D:50:7F "DISPENSER CRS: Switch cash-in cassette 3 faulty"
001D 3203_E A480000 :4800 000DP01:3D:50:7F "DISPENSER CRS: Switch cash-in cassette 4 faulty"
001D 3204_E A480000 :4800 000DP01:3D:50:7F "DISPENSER CRS: Switch cash-in cassette 5 faulty"
001D 3205_E ?0602 :4800 000DI01:3A:36:30 "DISPENSER CRS: Switch safe delivery/escrow/cash-out
tray faulty/blocked"
001D 3206_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Single reject switch faulty/blocked"
001D 3207_E A400000 80000000000000000 000DP01:3F:44:39 "DISPENSER CRS: Switch escrow (MA6) faulty/blocked"
001D 3210_E ?0602 :4000 000DI01:3A:36:30 "DISPENSER CRS: Measuring station faulty"
001D 3214_E A400000 80000000000000000 000DP01:3E:42:40 "DISPENSER CRS: Tape sensor in BIM module reports
error"
001D 3215_E ?0602 :4000 000DI01:3A:36:30 "DISPENSER CRS: Measuring station faulty"
001D 3216_E A604000 80000000000000000 000DP01:00:00:00 "DISPENSER CRS: BIM soiled or faulty"
001D 3217_E A604000 :6040 000DP01:00:00:00 "DISPENSER CRS: BIM communication reader faulty"
001D 3218_E A604000 :6040 000DP01:00:00:00 "DISPENSER CRS: BIM note impulses missing or out of
tolerance"
001D 3219_E A604000 :6040 000DP01:00:00:00 "DISPENSER CRS: BIM reports an acknowledgement error"
001D 3220_E ?0602 :6040 000DI01:3A:36:30 "DISPENSER CRS: Photosensor amplifier faulty"
001D 3230_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Retract switch (MA4) faulty/blocked"
001D 3231_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Selection switch faulty/blocked"
001D 3232_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Single reject switch faulty/blocked"
001D 3250_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Transport motor M1 faulty/blocked"
001D 3255_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Transport motor M2 faulty/blocked"
001D 3256_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Transport motor M3 faulty/blocked"
001D 3285_E @04 80000000000000000 000DR01:3A:41:40 "DISPENSER CRS: Shutter error"
001D 3286_E A400000 904 000DP01:3E:42:40 "DISPENSER CRS: Shutter error cash-in tray"
001D 3287_E @00 :4000 000DR01:3A:41:40 "DISPENSER CRS: Beater in cash-out tray blocked"
001D 3295_E ?0602 900 000DI01:3A:36:30 "DISPENSER CRS: Photosensor cash-out tray covered"
001D 3296_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor filling tray covered"
001D 3310_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER CRS: Too many bundle rejects (cassette 1)"

May 2011 223

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001D 3320_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER CRS: Too many bundle rejects (cassette 2)"
001D 3330_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER CRS: Too many bundle rejects (cassette 3)"
001D 3340_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER CRS: Too many bundle rejects (cassette 4)"
001D 3405_E ?0342 80000000000000000 000DI01:3E:33:34 "DISPENSER CRS: Extraction from filling tray impossible"
001D 3406_E @04 80000000000000000 000DR01:23:00:01 "DISPENSER CRS: Extraction from cash-out tray impos-
sible"
001D 3407_E A6A0000 904 000DP01:00:00:00 "DISPENSER CRS: Metal detection in input tray"
001D 3408_E A400000 :6A00 000DP01:3E:42:40 "DISPENSER CRS: Input shutter not closed"
001D 3410_E ?0B75 :4000 000DI01:3F:31p37 "DISPENSER CRS: Note extraction impossible (cassette 1)"
001D 3411_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Note extraction impossible (roller 1)"
001D 3420_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Note extraction impossible (cassette 2)"
001D 3421_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Note extraction impossible (roller 2)"
001D 3430_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Note extraction impossible (cassette 3)"
001D 3431_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Note extraction impossible (roller 3)"
001D 3440_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Note extraction impossible (cassette 4)"
001D 3441_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Note extraction impossible (roller 4)"
001D 3451_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Note extraction impossible (roller 5)"
001D 3461_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Note extraction impossible (roller 6)"
001D 3510_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER CRS: Too many bad notes (cassette 1)"
001D 3520_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER CRS: Too many bad notes (cassette 2)"
001D 3530_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER CRS: Too many bad notes (cassette 3)"
001D 3540_E ?0E95 80000000000000000 000DI01:3F:34p39 "DISPENSER CRS: Too many bad notes (cassette 4)"
001D 3605_E A400000 80000000000000000 000DP01:3E:42:40 "DISPENSER CRS: ESCROW faulty"
001D 3606_E A400000 :4000 000DP01:3E:42:40 "DISPENSER CRS: ESCROW, beginning of tape not found
or not leave "
001D 3607_E A400000 :4000 000DP01:3E:42:40 "DISPENSER CRS: Internal ESCROW error"
001D 3608_E A400000 :4000 000DP01:3E:42:40 "DISPENSER CRS: Wrong values from ESCROW impulse
channel"
001D 3610_E ?0B75 :4000 000DI01:3F:31p37 "DISPENSER CRS: Cassette 1 faulty"
001D 3611_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Roller 1 faulty"
001D 3620_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Cassette 2 faulty"
001D 3621_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Roller 2 faulty"
001D 3630_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Cassette 3 faulty"
001D 3631_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Roller 3 faulty"
001D 3640_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Cassette 4 faulty"
001D 3641_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Roller 4 faulty"
001D 3651_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Roller 5 faulty"
001D 3661_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Roller 6 faulty"
001D 3700_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor thickness measuring
station (safe module) soiled"
001D 3705_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor thickness measuring
station (counter area) soiled"
001D 3710_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Dispenser sensor soiled (cassette 1)"
001D 3720_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Dispenser sensor soiled (cassette 2)"
001D 3730_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Dispenser sensor soiled (cassette 3)"
001D 3740_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Dispenser sensor soiled (cassette 4)"
001D 3810_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Empty sensor soiled (cassette 1)"
001D 3820_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Empty sensor soiled (cassette 2)"
001D 3830_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Empty sensor soiled (cassette 3)"
001D 3840_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Empty sensor soiled (cassette 4)"
001D 3901_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L1 soiled"
001D 3902_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L2 soiled"
001D 3903_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L3 soiled"
001D 3904_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L4 soiled"
001D 3905_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L5 soiled"
001D 3906_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L6 soiled"
001D 3907_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L27 soiled"
001D 3908_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L8 soiled"
001D 3909_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L9 soiled"
001D 3910_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L10 soiled"
001D 3911_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L11 soiled"
001D 3912_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L12 soiled"
001D 3913_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L13 soiled"

224 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001D 3914_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L14 soiled"
001D 3915_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L15 soiled"
001D 3916_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L16 soiled"
001D 3917_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L17 soiled"
001D 3918_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L18 soiled"
001D 3919_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L19 soiled"
001D 3920_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L20 soiled"
001D 3921_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L21 soiled"
001D 3922_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L22 soiled"
001D 3923_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L23 soiled"
001D 3924_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L24 soiled"
001D 3925_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L25 soiled"
001D 3926_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor L26 soiled"
001D 3931_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor roller 1 soiled"
001D 3932_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor roller 2 soiled"
001D 3933_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor roller 3 soiled"
001D 3934_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor roller 4 soiled"
001D 3935_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor roller 5 soiled"
001D 3936_E ?0602 80000000000000000 000DI01:3A:36:30 "DISPENSER CRS: Photosensor roller 6 soiled"
001D 3941_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Filled roller 1 not placed in the right
position, or voltage missing"
001D 3942_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Filled roller 2 not placed in the right
position, or voltage missing"
001D 3943_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Filled roller 3 not placed in the right
position, or voltage missing"
001D 3944_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Filled roller 4 not placed in the right
position, or voltage missing"
001D 3945_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Filled roller 5 not placed in the right
position, or voltage missing"
001D 3946_E ?0B75 80000000000000000 000DI01:3F:31p37 "DISPENSER CRS: Filled roller 6 not placed in the right
position, or voltage missing"
001D A000_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER CRS: Wrong command"
001D A100_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER CRS: Wrong command"
001D A200_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER CRS: Programming error"
001D 3F03_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER CRS: Security thread sensor missing, or not
installed"
001D FE38_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER CRS: Communication problem"
001D FE50_E ?0912 80000000000000000 000DI01:38:00:00 "DISPENSER CRS: Communication problem"
001D FFFF_E ?0912 80000000000000000 000DI01:38:39:31 "DISPENSER CRS: Extended error code not computed"

May 2011 225

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

CRS NG (Classes: 0018_CIN/AA18_CIN/001D_CIN)

The following table lists the MDS Status codes assigned to the device classes
of the CRS NG that will be internally mapped to _CIN classes if the error has
occurred during a cash in transaction. Error codes of class "0018_CIN" are
basic errors. Class AA18_CIN is the USB class assigned to the Cash Dispenser
device. Error codes of class "001D_CIN" are extended errors.

Refer to section ”Error Class Mapping” on page 5.

Table 58: Cash In NG (Classes: 0018_CIN/AA18_CIN/001D_CIN)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0018_CIN DEFA_W A700000 :4000 000DP01:3E:42:40 "CASHIN NG: DEFAULT_WARNING"
0018_CIN DEFA_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: DEFAULT_ERROR"
0018_CIN E000_W A700000 :4000 000DP01:3E:42:40 "CASHIN NG: No banknotes taken by the customer"
0018_CIN E000_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: No banknotes taken by the customer"
0018_CIN E001_W A700000 :4000 000DP01:3E:42:40 "CASHIN NG: All banknotes taken by the customer"
0018_CIN E001_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: All banknotes taken by the customer"
0018_CIN E002_W A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Firmware on disk is newer than SW loaded in
CDM-NG"
0018_CIN E002_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Firmware on disk is newer than SW loaded in
CDM-NG"
0018_CIN E003_W A700000 :4000 000DP01:3E:42:40 "CASHIN NG: There is no firmware loaded in the CDM-NG"
0018_CIN E003_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: There is no firmware loaded in the CDM-NG"
0018_CIN E004_W A700000 :4000 000DP01:3E:42:40 "CASHIN NG: DH configured to switch LEDs"
0018_CIN E004_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: DH configured to switch LEDs"
0018_CIN E005_W A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Handling error at the filling tray"
0018_CIN E005_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Handling error at the filling tray"
0018_CIN EF00_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: V24 data not in the expected format"
0018_CIN EF01_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Invalid CRC received with encrypted line"
0018_CIN EF02_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Wrong value for FRM_AUTO_LOAD in
CSCCNG section"
0018_CIN EF03_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Wrong value for LED in CSCINI/Registry with
CSCCNG"
0018_CIN EF04_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Firmware loading could not be completed"
0018_CIN EF05_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Invalid currency files, check registry configu-
ration"
0018_CIN EF06_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Invalid currency Firmware loading could not be
completed"
0018_CIN EF07_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Wrong value for RECOVERY in Registry"
0018_CIN EF08_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Wrong value for VARIANT in Registry"
0018_CIN EF09_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Wrong value for BEB_STATISTICS in Registry"
0018_CIN EF0A_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Not enough currency files installed"
0018_CIN EF0B_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Wrong value for CHECK_MODULES in Registry"
0018_CIN EF0C_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Wrong value for DISPENSEIN_TRACE in
Registry"
0018_CIN EF0D_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Wrong value for CY_AUTOLOAD in Registry"
0018_CIN EF0E_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Wrong value for CY_MAP_NOTES in Registry"
0018_CIN EF0F_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Wrong value for CONFIG_BACKUP in Registry"
0018_CIN EF10_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Wrong value for LOADER_CTL in Registry"
0018_CIN EF11_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: BIM module of wrong type recognized"
0018_CIN EF12_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Currency file could not be opened"
0018_CIN EF13_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Currency file could not be read"
0018_CIN EF14_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Firmware file could not be opened"

226 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
0018_CIN EF15_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Firmware file could not be read"
0018_CIN EF16_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Invalid firmware file format"
0018_CIN EF17_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: BIM manipulation"
0018_CIN EF18_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: SCOPE active but jumper of CMD-V4 in wrong
position"
0018_CIN EF1A_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Wrong value for FILE_CTR in Registry"
0018_CIN F000_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Firmware not loaded in CDM-NG"
0018_CIN F001_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Wrong syntax"
0018_CIN F002_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: One of the locks is active"
0018_CIN F003_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Error occured during execution of command"
0018_CIN F004_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Safe door must be open for this command"
0018_CIN F005_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The command cannot be executed at this point
of time"
0018_CIN F006_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The CDM-NG recognized a problem with the
encryption"
0018_CIN F007_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: If no error found"
0018_CIN F012_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Same error as
CNG_FRM_DEVICE_NOT_READY"
0018_CIN F013_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The same error as CNG_FRM_ERROR with an
exception"
0018_CIN F015_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The same error as CNG_FRM_CONTEXT with
an exception"
0018_CIN FE06_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: COMM reports invalid spec. for the protocol"
0018_CIN FE07_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: A COMM WRITE command is cancelled by the
user"
0018_CIN FE08_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: COMM WRITE command could not be
executed"
0018_CIN FE09_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: A COMM READ command could not be
executed"
0018_CIN FE0A_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: A COMM READ command is cancelled by the
user"
0018_CIN FE0B_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The COMM driver reports a parity error"
0018_CIN FE0C_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The COMM driver reports a general error"
0018_CIN FE0F_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Peripheral device did not answer"
0018_CIN FE13_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The channel was not initialized"
0018_CIN FE16_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The COMM driver reports a break"
0018_CIN FE7A_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The COMM driver reports a overrun error"
0018_CIN FE7B_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The COMM driver reports a frameing error"
0018_CIN FE85_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The COMM driver could not be opened"
0018_CIN FE89_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The pointer pTxData is illegal"
0018_CIN FE8B_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Called function is invalid for CscCommOpen"
0018_CIN FE8C_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The peripheral device does not return an STX"
0018_CIN FE8D_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The peripheral device does not return an ETX"
0018_CIN FE8E_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Block length does not agree with the transmitted
block length"
0018_CIN FE8F_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The block ID is invalid"
0018_CIN FE90_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Received DID does not agree with the trans-
mitted DID"
0018_CIN FE91_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Wrong command specification"
0018_CIN FE92_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The received acknowledge type is invalid"
0018_CIN FE93_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Max no of repeat transmissions reached"
0018_CIN FE94_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Max no of receive repeats has been reached"
0018_CIN FE95_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Monitoring time during transmission has been
exceeded"
0018_CIN FE96_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Monitoring time during receive has been
exceeded"
0018_CIN FE97_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Busy time from phys. device excceeded"
0018_CIN FE98_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The protocol was cancelled"
0018_CIN FE9C_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The length in TxData is 0"
0018_CIN FE9D_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: CSCWISODLL could not be found in the PATH"
0018_CIN FE9E_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The CSCWISODLL could not be opened"
0018_CIN FEE0_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The peripheral device did not answer"
0018_CIN FEE1_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Peripheral device did not answer as expected"
0018_CIN FEE2_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The peripheral device is busy"
0018_CIN FEE3_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Peripheral device did not answer as expected"

May 2011 227

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
0018_CIN FEE4_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Max no. of repeat transmissions reached"
0018_CIN FEE5_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Device asked for termination"
0018_CIN FEE6_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Peripheral device did not answer"
0018_CIN FEE7_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Response of device not completely received"
0018_CIN FEE8_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The header of the response is invalid"
0018_CIN FEE9_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: DID does not agree with the transmitted DID"
0018_CIN FEEA_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: DID does not agree with the transmitted device
ID"
0018_CIN FEEB_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Command spec. does not agree with the trans-
mitted command spec."
0018_CIN FEEC_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The response of the device has not been
completely received"
0018_CIN FEED_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: A cancel command has been called"
0018_CIN FEEF_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: A cancel command has been called"
0018_CIN FEF0_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The command could not be executed"
0018_CIN FEF1_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The command was aborted by the user"
0018_CIN FEF2_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: The command could not be executed"
0018_CIN FEF3_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: A cancel command could not be executed"
0018_CIN FEF4_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Internal monitoring time exceeded"
0018_CIN FEF5_E A700000 :4000 000DP01:3E:42:40 "CASHIN NG: Internal error within the CSCWISODLL"
AA18_CIN DEFA_W A700000 :4000 000DP01:38:00:00 "USB/CIN: DEFAULT_WARNING"
AA18_CIN DEFA_E A700000 :4000 000DP01:38:00:00 "USB/CIN: DEFAULT_ERROR"
AA18_CIN 8000_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Unexpected descriptor was reported from USB
device"
AA18_CIN 8001_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Device not found"
AA18_CIN 8002_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Not enough memory available"
AA18_CIN 8003_E A700000 :4000 000DP01:38:00:00 "USB/CIN: It was no endpoint found in the descriptor"
AA18_CIN 8004_E A700000 :4000 000DP01:38:00:00 "USB/CIN: The creation of the list of USB devices failed"
AA18_CIN FE09_E A700000 :4000 000DP01:38:00:00 "USB/CIN: USB read command could not be executed in the
specified monitoring time"
AA18_CIN FE0A_E A700000 :4000 000DP01:38:00:00 "USB/CIN: USB READ command is cancelled by the user"
AA18_CIN FE89_E A700000 :4000 000DP01:38:00:00 "USB/CIN: The pointer pData is illegal"
AA18_CIN FE9C_E A700000 :4000 000DP01:38:00:00 "USB/CIN: The length in DataSize is 0 (zero)"
AA18_CIN 0001_E A700000 :4000 000DP01:38:00:00 "USB/CIN: CRC error has been detected"
AA18_CIN 0002_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Bit stuffing error has been detected"
AA18_CIN 0003_E A700000 :4000 000DP01:38:00:00 "USB/CIN: DATA toggle mismatch has been detected"
AA18_CIN 0004_E A700000 :4000 000DP01:38:00:00 "USB/CIN: STALLPID has been detected, error is reported by
the USB host controller"
AA18_CIN 0005_E A700000 :4000 000DP01:38:00:00 "USB/CIN: USB device is not responding, error is reported by
the USB host"
AA18_CIN 0006_E A700000 :4000 000DP01:38:00:00 "USB/CIN: PID check has failed, error is reported by the USB
host controller"
AA18_CIN 0007_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Unexpected PID detected, error is reported by the
USB host"
AA18_CIN 0008_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Data overrun error detected, error is reported by the
USB host"
AA18_CIN 0009_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Data underrun error detected, error is reported by
the USB host"
AA18_CIN 000A_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Error code is reserved by the USB host controller
driver"
AA18_CIN 000B_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Error code is reserved by the USB host controller
driver"
AA18_CIN 000C_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Buffer overrun has been detected, error is reported
by the USB host"
AA18_CIN 000D_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Buffer underrun has been detected, error is reported
by the USB host"
AA18_CIN 000F_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Buffer was not accessed, error is reported by the
USB host"
AA18_CIN 0010_E A700000 :4000 000DP01:38:00:00 "USB/CIN: FIFO error has been detected, PCI bus latency was
too long"
AA18_CIN 0011_E A700000 :4000 000DP01:38:00:00 "USB/CIN: XACT error has been detected, error is reported by
the USB host"
AA18_CIN 0012_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Device is babbling, data transfer phase exceeds the
USB frame length"
AA18_CIN 0013_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Data buffer error has been detected, error is
reported by the USB host"

228 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
AA18_CIN 0030_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Endpoint has been halted by the USB bus driver
USBD"
AA18_CIN 0100_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Memory allocation attempt has failed, error is
reported by the USB bus"
AA18_CIN 0200_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Invalid URB function code has been passed, error is
reported by the USB"
AA18_CIN 0300_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Invalid parameter has been passed, error is
reported by the USB bus"
AA18_CIN 0400_E A700000 :4000 000DP01:38:00:00 "USB/CIN: There are data transfer requests pending for the
device"
AA18_CIN 0500_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Request has failed, error is reported by the USB bus
driver USBD"
AA18_CIN 0600_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Invalid pipe handle has been passed, error is
reported by the USB bus"
AA18_CIN 0700_E A700000 :4000 000DP01:38:00:00 "USB/CIN: There is not enough bandwidth available, error is
reported by the USB bus"
AA18_CIN 0800_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Internal host controller error has been detected"
AA18_CIN 0900_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Short transfer has been detected, error is reported
by the USB bus"
AA18_CIN 0A00_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Bad start frame has been specified, error is reported
by the USB bus"
AA18_CIN 0B00_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Asynchronous request has failed, error is reported
by the USB bus driver"
AA18_CIN 0C00_E A700000 :4000 000DP01:38:00:00 "USB/CIN: USB frame control is currently owned, error is
reported by the USB bus"
AA18_CIN 0D00_E A700000 :4000 000DP01:38:00:00 "USB/CIN: USB frame control is currently not owned, error is
reported by the USB"
AA18_CIN 0E00_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Operation is not supported, error is reported by the
USB bus driver"
AA18_CIN 0F00_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Invalid configuration descriptor was reported by the
device"
AA18_CIN 1000_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Operation has failed, error is reported by the USBIO
driver"
AA18_CIN 1001_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Invalid input buffer has been passed to an IOCTL
operation"
AA18_CIN 1002_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Invalid output buffer has been passed to an IOCTL
operation"
AA18_CIN 1003_E A700000 :4000 000DP01:38:00:00 "USB/CIN: There is not enough system memory available to
complete the operation"
AA18_CIN 1004_E A700000 :4000 000DP01:38:00:00 "USB/CIN: There are read or write requests pending, error is
reported by the USBIO"
AA18_CIN 1005_E A700000 :4000 000DP01:38:00:00 "USB/CIN: USB device is already configured, error is reported
by the USBIO"
AA18_CIN 1006_E A700000 :4000 000DP01:38:00:00 "USB/CIN: The USB device is not configured, error is reported
by the USBIO driver"
AA18_CIN 1007_E A700000 :4000 000DP01:38:00:00 "USB/CIN: There are open pipes, error is reported by the
USBIO driver"
AA18_CIN 1008_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Either the handle is already bound to a pipe"
AA18_CIN 1009_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Handle is not bound to a pipe, error is reported by
the USBIO driver"
AA18_CIN 100A_E A700000 :4000 000DP01:38:00:00 "USB/CIN: USB device has been removed from the system"
AA18_CIN 100B_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Specified control code is not supported"
AA18_CIN 100C_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Operation has been timed out, error is reported by
the USBIO driver"
AA18_CIN 100D_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Invalid recipient has been specified"
AA18_CIN 100E_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Either an invalid request type has been specified"
AA18_CIN 100F_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Invalid IOCTL code has been specified, error is
reported by the USBIO"
AA18_CIN 1010_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Direction of the data transfer request is not
supported by that pipe"
AA18_CIN 1011_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Number of asynchronous data packets specified in
an asynchronous read"
AA18_CIN 1012_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Memory resources are exhausted. This error is
reported by the USBIO driver"
AA18_CIN 1013_E A700000 :4000 000DP01:38:00:00 "USB/CIN: The specified pipe was not found in the current
configuration"
AA18_CIN 1014_E A700000 :4000 000DP01:38:00:00 "USB/CIN: An invalid asynchronous data packet has been
specified"

May 2011 229

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
AA18_CIN 1015_E A700000 :4000 000DP01:38:00:00 "USB/CIN: There are not enough system resources to complete
the operation"
AA18_CIN 1016_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Specified interface was not found in the current
configuration"
AA18_CIN 1017_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Operation cannot be executed while the USB device
is in the current state"
AA18_CIN 1018_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Invalid parameter has been specified with an IOCTL
operation"
AA18_CIN 1019_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Evaluation interval of the USBIO DEMO version has
expired"
AA18_CIN 101A_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Invalid power state has been specified"
AA18_CIN 101B_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Device has entered a power down state"
AA18_CIN 101C_E A700000 :4000 000DP01:38:00:00 "USB/CIN: API version reported by the USBIO driver does not
match"
AA18_CIN 101D_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Set configuration operation has failed, error is
reported by the USBIO"
AA18_CIN 1080_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Operation has failed due to a restriction of the
USBIO LIGHT version"
AA18_CIN 1081_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Operation has failed due to a restriction of the
USBIO LIGHT version"
AA18_CIN 1082_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Operation has failed due to a restriction of the
USBIO LIGHT version"
AA18_CIN 1083_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Operation has failed due to a restriction of the
USBIO LIGHT version"
AA18_CIN 1084_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Operation has failed due to a restriction of the
USBIO LIGHT version"
AA18_CIN 1085_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Operation has failed due to a restriction of the
USBIO LIGHT version"
AA18_CIN 1086_E A700000 :4000 000DP01:38:00:00 "USB/CIN: The operation has failed due to a restriction of the
USBIO LIGHT version"
AA18_CIN 1087_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Operation has failed due to a restriction of the
USBIO LIGHT version"
AA18_CIN 1100_E A700000 :4000 000DP01:38:00:00 "USB/CIN: The specified device object does not exist"
AA18_CIN 1102_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Device object was opened, there is no valid handle
to execute the operation"
AA18_CIN 1104_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Enumeration of the specified devices has failed"
AA18_CIN 1105_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Invalid parameter has been passed to a function"
AA18_CIN 1106_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Library setupapi.dll could not be loaded"
AA18_CIN 2000_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Set configuration request has failed"
AA18_CIN 3000_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Buffer is too small, error is reported by the USB bus
driver USBD"
AA18_CIN 4000_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Interface was not found, error is reported by the
USB bus driver USBD"
AA18_CIN 5000_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Invalid pipe flags have been specified"
AA18_CIN 6000_E A700000 :4000 000DP01:38:00:00 "USB/CIN: Operation has been timed out, error is reported by
the USB bus driver"
AA18_CIN 7000_E A700000 :4000 000DP01:38:00:00 "USB/CIN: USB device is gone, error is reported by the USB
bus driver USBD"
001D_CIN DEFA_W A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: DEFAULT_WARNING"
001D_CIN DEFA_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: DEFAULT_ERROR"
001D_CIN 3000_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Context error"
001D_CIN 3010_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: No response from CRS"
001D_CIN 3016_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: CRS electronics faulty"
001D_CIN 3020_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: CRS communication problem"
001D_CIN 3025_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: CRS communication problem"
001D_CIN 3100_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: CRS controller error"
001D_CIN 3101_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: CRS controller error"
001D_CIN 3105_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: CRS controller error"
001D_CIN 3106_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: CRS controller error"
001D_CIN 3110_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Software missing in CRS"
001D_CIN 3120_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: CRS has not been inserted completely"
001D_CIN 3125_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Front or rear door not closed"
001D_CIN 3135_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Max number of retracts reached"
001D_CIN 3136_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Device lock after jam"
001D_CIN 3137_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: CashIn box for level 3 notes overfilled"
001D_CIN 3140_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Minimum configuration cash-out not reached."

230 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001D_CIN 3145_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Minimum configuration cash-in not reached."
001D_CIN 3146_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Minimum configuration BIM not reached."
001D_CIN 3170_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Money jam during cash-in"
001D_CIN 3171_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Money jam during cash-in"
001D_CIN 3175_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Money jam during cash-in"
001D_CIN 3176_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Money jam during cash-in"
001D_CIN 3178_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Money jam during cash-in"
001D_CIN 3179_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Money jam during cash-in"
001D_CIN 3180_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Money jam during cash-out"
001D_CIN 3181_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Money jam during cash-out"
001D_CIN 3182_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Money jam during reject/retract"
001D_CIN 3185_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Note jam during cash-out"
001D_CIN 3186_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Money jam during bundle reject"
001D_CIN 3187_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Money jam during retract"
001D_CIN 3200_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Switch cash-in cassette 1 faulty"
001D_CIN 3201_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Switch cash-in cassette 2 faulty"
001D_CIN 3202_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Switch cash-in cassette 3 faulty"
001D_CIN 3203_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Switch cash-in cassette 4 faulty"
001D_CIN 3204_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Switch cash-in cassette 5 faulty"
001D_CIN 3205_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Switch safe delivery/escrow/cash-out tray
faulty/blocked"
001D_CIN 3206_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Single reject switch faulty/blocked"
001D_CIN 3207_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Switch escrow (MA6) faulty/blocked"
001D_CIN 3210_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Measuring station faulty"
001D_CIN 3214_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Tape sensor in BIM module reports error"
001D_CIN 3215_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Measuring station faulty"
001D_CIN 3216_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: BIM soiled or faulty"
001D_CIN 3217_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: BIM communication reader faulty"
001D_CIN 3218_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: BIM note impulses missing or out of tolerance"
001D_CIN 3219_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: BIM reports an acknowledgement error"
001D_CIN 3220_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor amplifier faulty"
001D_CIN 3230_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Retract switch (MA4) faulty/blocked"
001D_CIN 3231_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Selection switch faulty/blocked"
001D_CIN 3232_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Single reject switch faulty/blocked"
001D_CIN 3250_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Transport motor M1 faulty/blocked"
001D_CIN 3255_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Transport motor M2 faulty/blocked"
001D_CIN 3256_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Transport motor M3 faulty/blocked"
001D_CIN 3285_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Shutter error"
001D_CIN 3286_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Shutter error cash-in tray"
001D_CIN 3287_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Beater in cash-out tray blocked"
001D_CIN 3295_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor cash-out tray covered"
001D_CIN 3296_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor filling tray covered"
001D_CIN 3310_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Too many bundle rejects (cassette 1)"
001D_CIN 3320_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Too many bundle rejects (cassette 2)"
001D_CIN 3330_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Too many bundle rejects (cassette 3)"
001D_CIN 3340_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Too many bundle rejects (cassette 4)"
001D_CIN 3405_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Extraction from filling tray impossible"
001D_CIN 3406_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Extraction from cash-out tray impossible"
001D_CIN 3407_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Metal detection in input tray"
001D_CIN 3408_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Input shutter not closed"
001D_CIN 3410_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Note extraction impossible (cassette 1)"
001D_CIN 3411_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Note extraction impossible (roller 1)"
001D_CIN 3420_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Note extraction impossible (cassette 2)"
001D_CIN 3421_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Note extraction impossible (roller 2)"
001D_CIN 3430_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Note extraction impossible (cassette 3)"
001D_CIN 3431_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Note extraction impossible (roller 3)"
001D_CIN 3440_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Note extraction impossible (cassette 4)"
001D_CIN 3441_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Note extraction impossible (roller 4)"
001D_CIN 3451_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Note extraction impossible (roller 5)"
001D_CIN 3461_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Note extraction impossible (roller 6)"
001D_CIN 3510_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Too many bad notes (cassette 1)"
001D_CIN 3520_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Too many bad notes (cassette 2)"
001D_CIN 3530_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Too many bad notes (cassette 3)"

May 2011 231

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001D_CIN 3540_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Too many bad notes (cassette 4)"
001D_CIN 3605_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: ESCROW faulty"
001D_CIN 3606_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: ESCROW, beginning of tape not found or not
leave "
001D_CIN 3607_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Internal ESCROW error"
001D_CIN 3608_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Wrong values from ESCROW impulse channel"
001D_CIN 3610_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Cassette 1 faulty"
001D_CIN 3611_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Roller 1 faulty"
001D_CIN 3620_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Cassette 2 faulty"
001D_CIN 3621_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Roller 2 faulty"
001D_CIN 3630_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Cassette 3 faulty"
001D_CIN 3631_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Roller 3 faulty"
001D_CIN 3640_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Cassette 4 faulty"
001D_CIN 3641_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Roller 4 faulty"
001D_CIN 3651_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Roller 5 faulty"
001D_CIN 3661_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Roller 6 faulty"
001D_CIN 3700_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor thickness measuring station (safe
module) soiled"
001D_CIN 3705_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor thickness measuring station
(counter area) soiled"
001D_CIN 3710_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Dispenser sensor soiled (cassette 1)"
001D_CIN 3720_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Dispenser sensor soiled (cassette 2)"
001D_CIN 3730_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Dispenser sensor soiled (cassette 3)"
001D_CIN 3740_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Dispenser sensor soiled (cassette 4)"
001D_CIN 3810_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Empty sensor soiled (cassette 1)"
001D_CIN 3820_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Empty sensor soiled (cassette 2)"
001D_CIN 3830_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Empty sensor soiled (cassette 3)"
001D_CIN 3840_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Empty sensor soiled (cassette 4)"
001D_CIN 3901_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L1 soiled"
001D_CIN 3902_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L2 soiled"
001D_CIN 3903_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L3 soiled"
001D_CIN 3904_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L4 soiled"
001D_CIN 3905_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L5 soiled"
001D_CIN 3906_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L6 soiled"
001D_CIN 3907_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L27 soiled"
001D_CIN 3908_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L8 soiled"
001D_CIN 3909_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L9 soiled"
001D_CIN 3910_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L10 soiled"
001D_CIN 3911_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L11 soiled"
001D_CIN 3912_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L12 soiled"
001D_CIN 3913_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L13 soiled"
001D_CIN 3914_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L14 soiled"
001D_CIN 3915_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L15 soiled"
001D_CIN 3916_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L16 soiled"
001D_CIN 3917_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L17 soiled"
001D_CIN 3918_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L18 soiled"
001D_CIN 3919_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L19 soiled"
001D_CIN 3920_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L20 soiled"
001D_CIN 3921_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L21 soiled"
001D_CIN 3922_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L22 soiled"
001D_CIN 3923_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L23 soiled"
001D_CIN 3924_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L24 soiled"
001D_CIN 3925_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L25 soiled"
001D_CIN 3926_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor L26 soiled"
001D_CIN 3931_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor roller 1 soiled"
001D_CIN 3932_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor roller 2 soiled"
001D_CIN 3933_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor roller 3 soiled"
001D_CIN 3934_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor roller 4 soiled"
001D_CIN 3935_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor roller 5 soiled"
001D_CIN 3936_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Photosensor roller 6 soiled"
001D_CIN 3941_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Filled roller 1 not placed in the right position, or
voltage missing"

232 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001D_CIN 3942_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Filled roller 2 not placed in the right position, or
voltage missing"
001D_CIN 3943_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Filled roller 3 not placed in the right position, or
voltage missing"
001D_CIN 3944_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Filled roller 4 not placed in the right position, or
voltage missing"
001D_CIN 3945_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Filled roller 5 not placed in the right position, or
voltage missing"
001D_CIN 3946_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Filled roller 6 not placed in the right position, or
voltage missing"
001D_CIN A000_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Wrong command"
001D_CIN A100_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Wrong command"
001D_CIN A200_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Programming error"
001D_CIN 3F03_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Security thread sensor missing, or not installed"
001D_CIN FE38_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Communication problem"
001D_CIN FE50_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Communication problem"
001D_CIN FFFF_E A700000 :4000 000DP01:3E:42:40 "CASHIN CRS: Extended error code not computed"

Cash Cheque Deposit Module (Classes: 001A/XX1A)

The following table lists the MDS Status codes assigned to the device classes
Cash Cheque Deposit Module (CCDM). Class AA1A is the class IEEE 1394
assigned to device class ChequeInFW. Class BB1A is class IEEE 1394
assigned to device class CashInFW. Class CC1A is class USB assigned to
device class CashInFW. Class DDA is class USB assigned to device class
ChequeInFW.

Refer to section ”Error Class Mapping” on page 5.

Table 59: Cash Cheque Deposit Module (CCDM) (Classes: 001A/XX1A)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
001A DEFA_E A400000 :4000 000DP01:38:00:00 "CCDM: DEFAULT ERROR"
001A DEFA_W A400000 :4000 000DP01:38:00:00 "CCDM: DEFAULT WARNING"
001A 0001_E A400000 :4000 000DP01:38:00:00 "CCDM: No connection to dispenser module"
001A 0002_E A400000 :4000 000DP01:38:00:00 "CCDM: No connection to amplifier logic"
001A 0003_E A400000 :4000 000DP01:38:00:00 "CCDM: No connection to stacker logic"
001A 0014_E A400000 :4000 000DP01:38:00:00 "CCDM: General firmware error"
001A 0015_E A400000 :4000 000DP01:38:00:00 "CCDM: Battery on controller board empty"
001A 0016_E A400000 :4000 000DP01:38:00:00 "CCDM: Safety switch active"
001A 0017_E A400000 :4000 000DP01:38:00:00 "CCDM: System interface does not fetch the data from the
CCDM fast enough"
001A 0018_E A400000 :4000 000DP01:38:00:00 "CCDM: Invalid or missing configuration"
001A 0019_E A400000 :4000 000DP01:38:00:00 "CCDM: The application overloads the CCDM hardware (too
many reset commands per time)"
001A 001E_E A400000 :4000 000DP01:38:00:00 "CCDM: Error magnetic character reader"
001A 0028_E A400000 :4000 000DP01:38:00:00 "CCDM: Error cheque/cash reader"
001A 0029_E A400000 :4000 000DP01:38:00:00 "CCDM: Firmware error cheque/cash reader"
001A 002A_E A400000 :4000 000DP01:38:00:00 "CCDM: Communication problem cheque/cash reader"
001A 002B_E A400000 :4000 000DP01:38:00:00 "CCDM: Data error cheque/cash reader"
001A 002C_E A400000 :4000 000DP01:38:00:00 "CCDM: Note table configuration not Ok"

May 2011 233

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001A 002D_E A400000 :4000 000DP01:38:00:00 "CCDM: External light in cheque/cash reader"
001A 002F_E A400000 :4000 000DP01:38:00:00 "CCDM: Communication problems (time out)"
001A 0030_E A400000 :4000 000DP01:38:00:00 "CCDM: Communication problems"
001A 0031_E A400000 :4000 000DP01:38:00:00 "CCDM: Cheque/cash reader firmware and CCDM firmware
are incompatible"
001A 0032_E A400000 :4000 000DP01:38:00:00 "CCDM: BEB module is defective"
001A 0033_E A400000 :4000 000DP01:38:00:00 "CCDM: Communication problems with cheque/cash reader"
001A 0034_E A400000 :4000 000DP01:38:00:00 "CCDM: BEB note table configuration not Ok"
001A 0035_E A400000 :4000 000DP01:38:00:00 "CCDM: BEB module is defective"
001A 0036_E A400000 :4000 000DP01:38:00:00 "CCDM: Communication problem from BEB to RS232
interface"
001A 0037_E A400000 :4000 000DP01:38:00:00 "CCDM: BEB firmware and CCDM firmware are incom-
patible"
001A 0038_E A400000 :4000 000DP01:38:00:00 "CCDM: Communication problems RS232 interface <-> BEB
module"
001A 003D_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor VLS"
001A 003E_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor VLS"
001A 003F_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor VLS"
001A 0040_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor VLS"
001A 0041_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor VLS1"
001A 0042_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor ALS"
001A 0043_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor ALS"
001A 0044_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor ALS"
001A 0045_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor ALS"
001A 0046_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor SLS"
001A 0047_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor SLS"
001A 0048_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor ELS"
001A 0049_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor RLS"
001A 004A_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor RLS"
001A 004B_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor VLS1"
001A 004C_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor ELS"
001A 004D_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor VLS10"
001A 0050_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor KLS"
001A 0051_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor KLS"
001A 0052_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor KLS"
001A 0053_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor KLS1"
001A 0054_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor KLS2"
001A 0055_E A400000 :4000 000DP01:38:00:00 "CCDM: Error photosensor KLS3"
001A 0064_E A400000 :4000 000DP01:38:00:00 "CCDM: Transport error detected before dispensing"
001A 0065_E A400000 :4000 000DP01:38:00:00 "CCDM: Paper jam detected during separation process"
001A 0066_E A400000 :4000 000DP01:38:00:00 "CCDM: VLS6: media too long (media do not pass (VLS6)"
001A 0067_E A400000 :4000 000DP01:38:00:00 "CCDM: VLS7: medium is expected but no media is coming"
001A 0069_E A400000 :4000 000DP01:38:00:00 "CCDM: VLS7: media do not leave VLS7"
001A 006A_E A400000 :4000 000DP01:38:00:00 "CCDM: VLS6: media do not leave VLS6"
001A 006C_E A400000 :4000 000DP01:38:00:00 "CCDM: Faulty extraction detected during dispensing
process"
001A 006E_E A400000 :4000 000DP01:38:00:00 "CCDM: Clearing error I/O tray. Media jam in the intermediary
transport"
001A 006F_E A400000 :4000 000DP01:38:00:00 "CCDM: Clearing error I/O tray. Media jam in the I/O
transport"
001A 0070_E A400000 :4000 000DP01:38:00:00 "CCDM: Clearing error I/O tray. Media do not reached VLS"
001A 0071_E A400000 :4000 000DP01:38:00:00 "CCDM: Clearing error I/O tray. Media jam in the separation
area of the dispense"
001A 0072_E A400000 :4000 000DP01:38:00:00 "CCDM: Clearing error I/O tray. Media jam in the intermediary
transport"
001A 0073_E A400000 :4000 000DP01:38:00:00 "CCDM: Clearing error I/O tray. Media jam in the intermediary
transport"
001A 0074_E A400000 :4000 000DP01:38:00:00 "CCDM: Media jam in reject transport area"
001A 0078_E A400000 :4000 000DP01:38:00:00 "CCDM: Initialization error hinged transport 1 and/or 2"
001A 0079_E A400000 :4000 000DP01:38:00:00 "CCDM: Position error hingend transport 1. The end position
is not reached"
001A 007A_E A400000 :4000 000DP01:38:00:00 "CCDM: Position error hinged transport 2. The end position is
not reached"
001A 0082_E A400000 :4000 000DP01:38:00:00 "CCDM: Initialization error during setting the bundle width"
001A 008C_E A400000 :4000 000DP01:38:00:00 "CCDM: Error on the cam disk"

234 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001A 008D_E A400000 :4000 000DP01:38:00:00 "CCDM: Error on the cam disk"
001A 0090_E A400000 :4000 000DP01:38:00:00 "CCDM: Shutter cannot be opened/closed."
001A 0091_E A400000 :4000 000DP01:38:00:00 "CCDM: Error on metal detection module"
001A 0096_E A400000 :4000 000DP01:38:00:00 "CCDM: VHS1: hardware error thickness measuring station"
001A 0097_E A400000 :4000 000DP01:38:00:00 "CCDM: VHS1: hardware error thickness measuring station"
001A 0098_E A400000 :4000 000DP01:38:00:00 "CCDM: Error of hall sensors"
001A 00AA_E A400000 :4000 000DP01:38:00:00 "CCDM: Initialization error of reject transport"
001A 00AB_E A400000 :4000 000DP01:38:00:00 "CCDM: Media jam in the reject transport area"
001A 00B4_E A400000 :4000 000DP01:38:00:00 "CCDM: Media jam in reject transport area"
001A 00B5_E A400000 :4000 000DP01:38:00:00 "CCDM: Clearing error storage transport. Media did not
passed VLS2"
001A 00B6_E A400000 :4000 000DP01:38:00:00 "CCDM: Media jam found in front of VLS12 during reject box
clearing => I/O box"
001A 00B9_E A400000 :4000 000DP01:38:00:00 "CCDM: Paper jam detected during separation process"
001A 00BA_E A400000 :4000 000DP01:38:00:00 "CCDM: Paper jam detected during separation process"
001A 00BB_E A400000 :4000 000DP01:38:00:00 "CCDM: Paper jam detected during separation process"
001A 00BC_E A400000 :4000 000DP01:38:00:00 "CCDM: Paper jam detected during separation process"
001A 00BD_E A400000 :4000 000DP01:38:00:00 "CCDM: Paper jam detected during separation process"
001A 00C8_E A400000 :4000 000DP01:38:00:00 "CCDM: Media in front oaf ALS1 or ALS1 defect"
001A 00C9_E A400000 :4000 000DP01:38:00:00 "CCDM: ALS1: medium is expected but no media is coming"
001A 00CA_E A400000 :4000 000DP01:38:00:00 "CCDM: ALS1: media too long (media do not pass the drum)"
001A 00CB_E A400000 :4000 000DP01:38:00:00 "CCDM: ALS1: media is complete recognized but is too long"
001A 00CC_E A400000 :4000 000DP01:38:00:00 "CCDM: ALS1: media jam in the drum"
001A 00CD_E A400000 :4000 000DP01:38:00:00 "CCDM: ALS1: Media end is not detected during entering the
drum"
001A 00CE_E A400000 :4000 000DP01:38:00:00 "CCDM: ALS1: Media end do not detected during leaving the
drum"
001A 012D_E A400000 :4000 000DP01:38:00:00 "CCDM: Media jam in sensor transport at the 3-way deflector"
001A 012E_E A400000 :4000 000DP01:38:00:00 "CCDM: Media jam in sensor transport at the reject deflector"
001A 0136_E A400000 :4000 000DP01:38:00:00 "CCDM: BEB module not mounted or not properly connected
to the backplane"
001A 0137_E A400000 :4000 000DP01:38:00:00 "CCDM: SLS3: unexpected media during transport from the
alignment module"
001A 0138_E A400000 :4000 000DP01:38:00:00 "CCDM: SLS3: unexpected media during transport from the
escrow module"
001A 0139_E A400000 :4000 000DP01:38:00:00 "CCDM: SLS3: media jam in sensor transport"
001A 0140_E A400000 :4000 000DP01:38:00:00 "CCDM: SLS1: medium is expected but no media is coming"
001A 0141_E A400000 :4000 000DP01:38:00:00 "CCDM: SLS1: unexpected document during transport from
the alignment module"
001A 0142_E A400000 :4000 000DP01:38:00:00 "CCDM: SLS1: unexpected document during transport from
the escrow module"
001A 0143_E A400000 :4000 000DP01:38:00:00 "CCDM: Document jam in area -> document deflector ->
escrow/reject module"
001A 0144_E A400000 :4000 000DP01:38:00:00 "CCDM: Cheque/cash reader: unexpected media during
transport from the alignment module"
001A 014A_E A400000 :4000 000DP01:38:00:00 "CCDM: Document jam at the escrow module ELS1"
001A 014B_E A400000 :4000 000DP01:38:00:00 "CCDM: Document jam between sensor module and
cassette/reject module"
001A 014C_E A400000 :4000 000DP01:38:00:00 "CCDM: Document jam between sensor transport and reject
transport"
001A 014D_E A400000 :4000 000DP01:38:00:00 "CCDM: Cheque/cash reader: the gap between two media is
too small"
001A 0190_E A400000 :4000 000DP01:38:00:00 "CCDM: Escrow tape at ELS2 defective"
001A 0191_E A400000 :4000 000DP01:38:00:00 "CCDM: Escrow tape at ELS3 defective"
001A 0192_E A400000 :4000 000DP01:38:00:00 "CCDM: Document into escrow not expected"
001A 0193_E A400000 :4000 000DP01:38:00:00 "CCDM: Failure in ELS1 area"
001A 0194_E A400000 :4000 000DP01:38:00:00 "CCDM: Document missing or escrow empty"
001A 0195_E A400000 :4000 000DP01:38:00:00 "CCDM: Gap between two notes too long or jam at escrow
unit"
001A 0196_E A400000 :4000 000DP01:38:00:00 "CCDM: Initialisation not finished in the spezified time"
001A 0197_E A400000 :4000 000DP01:38:00:00 "CCDM: Document jam at the escrow unit"
001A 01F5_E A400000 :4000 000DP01:38:00:00 "CCDM: Incorrect deflector position"
001A 01F6_E A400000 :4000 000DP01:38:00:00 "CCDM: Jam between sensor module (paper deflectors) and
before RLS1"
001A 01F7_E A400000 :4000 000DP01:38:00:00 "CCDM: Document too short"
001A 01F8_E A400000 :4000 000DP01:38:00:00 "CCDM: Document too long"

May 2011 235

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001A 0258_E A400000 :4000 000DP01:38:00:00 "CCDM: Document jam at the escrow unit"
001A 0259_E A400000 :4000 000DP01:38:00:00 "CCDM: RLS1: jam or medium too long"
001A 025A_E A400000 :4000 000DP01:38:00:00 "CCDM: RLS1: medium missing at KLS2 (module entry)"
001A 025B_E A400000 :4000 000DP01:38:00:00 "CCDM: KLS2: unexpected medium at module entry"
001A 025C_E A400000 :4000 000DP01:38:00:00 "CCDM: KLS2: jam or medium too long"
001A 025D_E A400000 :4000 000DP01:38:00:00 "CCDM: Incorrect position of deflector in cassette module"
001A 025E_E A400000 :4000 000DP01:38:00:00 "CCDM: KLS2: medium to retract box missing"
001A 025F_E A400000 :4000 000DP01:38:00:00 "CCDM: Retract cassette: jam or medium too long"
001A 0260_E A400000 :4000 000DP01:38:00:00 "CCDM: Incorrect position of deflector in cassette module 1"
001A 0261_E A400000 :4000 000DP01:38:00:00 "CCDM: KLS2: medium to box 1 missing"
001A 0262_E A400000 :4000 000DP01:38:00:00 "CCDM: Cassette module 1: jam or medium too long"
001A 0263_E A400000 :4000 000DP01:38:00:00 "CCDM: Incorrect position of deflector in cassette module 2"
001A 0264_E A400000 :4000 000DP01:38:00:00 "CCDM: KLS2: medium to box 2 missing"
001A 0265_E A400000 :4000 000DP01:38:00:00 "CCDM: Cassette module 2: jam or medium too long"
001A 0266_E A400000 :4000 000DP01:38:00:00 "CCDM: Media jam KLS5 - KSM"
001A 0267_E A400000 :4000 000DP01:38:00:00 "CCDM: Error in cassette 1 during init"
001A 0268_E A400000 :4000 000DP01:38:00:00 "CCDM: Error in cassette 2 during init"
001A 0269_E A400000 :4000 000DP01:38:00:00 "CCDM: Error in cassette 1"
001A 026A_E A400000 :4000 000DP01:38:00:00 "CCDM: Incorrect position of deflector in transfer unit"
001A 100F_E A400000 :4000 000DP01:38:00:00 "CCDM: Device Handler not initialised"
001A 1420_E A400000 :4000 000DP01:38:00:00 "CCDM: Invalid handle in parameter block"
001A 1421_E A400000 :4000 000DP01:38:00:00 "CCDM: Illegal device number was transferred when the
handle was created"
001A 1424_E A400000 :4000 000DP01:38:00:00 "CCDM: Device handler currently locked by another user"
001A 8000_E A400000 :4000 000DP01:38:00:00 "CCDM: Invalid parameter in command"
001A 8001_E A400000 :4000 000DP01:38:00:00 "CCDM: No document inserted"
001A 8002_E A400000 :4000 000DP01:38:00:00 "CCDM: Function CscPrtRead was called, but no MICR
mode via CscPrtControl selected"
001A 8003_E A400000 :4000 000DP01:38:00:00 "CCDM: The CCDM device handler presumes MS-Windows
2000 or MS-Windows XP"
001A 8004_E A400000 :4000 000DP01:38:00:00 "CCDM: There is still a document in the scanner"
001A 8005_E A400000 :4000 000DP01:38:00:00 "CCDM: The CCDM-HW send unknown response to a
command"
001A 8006_E A400000 :4000 000DP01:38:00:00 "CCDM: Cannot open raw file (CCDM.RAW)"
001A 8007_E A400000 :4000 000DP01:38:00:00 "CCDM: Error writing raw file (CCDM.RAW)"
001A 8008_E A400000 :4000 000DP01:38:00:00 "CCDM: The shutter could not be opened"
001A 8009_E A400000 :4000 000DP01:38:00:00 "CCDM: The shutter could not be closed"
001A 800A_E A400000 :4000 000DP01:38:00:00 "CCDM: Invalid CRC (check character) received with
encrypted line"
001A 800B_E A400000 :4000 000DP01:38:00:00 "CCDM: Wrong value for FRM_LOAD in Registry with
CSCCCDM"
001A 800C_E A400000 :4000 000DP01:38:00:00 "CCDM: Firmware loading could not be completed"
001A 800D_E A400000 :4000 000DP01:38:00:00 "CCDM: Wrong value for LED, LED_FLASH or LED_FREQ"
001A 800E_E A400000 :4000 000DP01:38:00:00 "CCDM: Wrong value for MAX_HEIGHT_CHEQUE,
MAX_HEIGHT_NOTES, MAX_WIDTH_CHEQUE"
001A 800F_E A400000 :4000 000DP01:38:00:00 "CCDM: Wrong value for the parameter
SCAN_FRONT_RED, SCAN_FRONT_GREEN"
001A 8010_E A400000 :4000 000DP01:38:00:00 "CCDM: Wrong value for SHUTTER_BEHAVIOUR in
Registry with CSCCCDM"
001A 8011_E A400000 :4000 000DP01:38:00:00 "CCDM: The thread which receives the image/signature data
could not started"
001A 8012_E A400000 :4000 000DP01:38:00:00 "CCDM: The thread which receives the image/signature data
could not stopped"
001A 8013_E A400000 :4000 000DP01:38:00:00 "CCDM: The pointer "
001A 8014_E A400000 :4000 000DP01:38:00:00 "CCDM: The transferred cheque data (pointer, length) is
illegal"
001A 8015_E A400000 :4000 000DP01:38:00:00 "CCDM: No cheque number received while dispensing
cheques or sheets"
001A 8016_E A400000 :4000 000DP01:38:00:00 "CCDM: An error occurred while opening a currency file"
001A 8017_E A400000 :4000 000DP01:38:00:00 "CCDM: An error occurred while opening a currency file"
001A 8018_E A400000 :4000 000DP01:38:00:00 "CCDM: The currency file is not dedicated for the installed
note sensor"
001A 8019_E A400000 :4000 000DP01:38:00:00 "CCDM: A wrong keyword inside a currency file has been
detected"
001A 801A_E A400000 :4000 000DP01:38:00:00 "CCDM: The loading of new currency data not possible"

236 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001A 801B_E A400000 :4000 000DP01:38:00:00 "CCDM: New currency file loaded during installation"
001A 801C_E A400000 :4000 000DP01:38:00:00 "CCDM: Error occurred while opening firmware file"
001A 801D_E A400000 :4000 000DP01:38:00:00 "CCDM: Error occured while reading sensor firmware file"
001A 801E_E A400000 :4000 000DP01:38:00:00 "CCDM: Firmware file is not dedicated for the installed
sensor"
001A 801F_E A400000 :4000 000DP01:38:00:00 "CCDM: Wrong value for SENS_FRM_LOAD in Registry with
CSCCCDM"
001A 8020_E A400000 :4000 000DP01:38:00:00 "CCDM: Not possible to read the current note table from the
note sensor"
001A 8021_E A400000 :4000 000DP01:38:00:00 "CCDM: Too much notes inserted"
001A 8022_E A400000 :4000 000DP01:38:00:00 "CCDM: Timeout while waiting for signature ID"
001A 8023_E A400000 :4000 000DP01:38:00:00 "CCDM: Number of detected cheques on ESCROW and
number of scanned cheques different"
001A 8024_E A400000 :4000 000DP01:38:00:00 "CCDM: Error in previous transaction"
001A 8025_E A400000 :4000 000DP01:38:00:00 "CCDM: Error in previous transaction"
001A 8026_E A400000 :4000 000DP01:38:00:00 "CCDM: Error occurred while opening a sensor firmware file"
001A 8027_E A400000 :4000 000DP01:38:00:00 "CCDM: Error occured while reading a CCDM firmware file"
001A 8028_E A400000 :4000 000DP01:38:00:00 "CCDM: The firmware file is not valid for the current CCDM
hardware"
001A 8030_E A400000 :4000 000DP01:38:00:00 "CCDM: The checksum of the signature data of a note is
wrong"
001A 8031_E A400000 :4000 000DP01:38:00:00 "CCDM: Invalid storing exceptions"
001A 9201_E A400000 :4000 000DP01:38:00:00 "CCDM: Illegal arguments calling IMACON.DLL"
001A 9202_E A400000 :4000 000DP01:38:00:00 "CCDM: Cannot open input file"
001A 9203_E A400000 :4000 000DP01:38:00:00 "CCDM: Error reading input"
001A 9204_E A400000 :4000 000DP01:38:00:00 "CCDM: Cannot open output file"
001A 9205_E A400000 :4000 000DP01:38:00:00 "CCDM: Error writing output file"
001A 9206_E A400000 :4000 000DP01:38:00:00 "CCDM: Not enough memory"
001A 9207_E A400000 :4000 000DP01:38:00:00 "CCDM: Image too long"
001A 9208_E A400000 :4000 000DP01:38:00:00 "CCDM: Image too large (for TIF)"
001A 9209_E A400000 :4000 000DP01:38:00:00 "CCDM: Image too small (<1 row)"
001A 920A_E A400000 :4000 000DP01:38:00:00 "CCDM: Error in final conversion step"
001A 920B_E A400000 :4000 000DP01:38:00:00 "CCDM: Error in temp file access"
001A 920C_E A400000 :4000 000DP01:38:00:00 "CCDM: Error loading imareco.dll"
001A 92E0_E A400000 :4000 000DP01:38:00:00 "CCDM: IMACON.DLL returns an error while generation of
JPG image"
001A 92FF_E A400000 :4000 000DP01:38:00:00 "CCDM: IMACON.DLL returned undefined error"
001A 9300_E A400000 :4000 000DP01:38:00:00 "CCDM: Internal error while calling DQF.DLL"
001A 9301_E A400000 :4000 000DP01:38:00:00 "CCDM: Internal error while calling DQF.DLL"
001A 9302_E A400000 :4000 000DP01:38:00:00 "CCDM: Internal error while calling DQF.DLL"
001A 9303_E A400000 :4000 000DP01:38:00:00 "CCDM: Internal error while calling DQF.DLL"
001A 9304_E A400000 :4000 000DP01:38:00:00 "CCDM: Internal error while calling DQF.DLL"
001A 9305_E A400000 :4000 000DP01:38:00:00 "CCDM: Internal error while calling DQF.DLL"
001A 93FF_E A400000 :4000 000DP01:38:00:00 "CCDM: DQF.DLL returned undefined error"
001A E000_E A400000 :4000 000DP01:38:00:00 "CCDM: Tray operating error (e.g. banknotes not correct
inserted)"
001A E001_E A400000 :4000 000DP01:38:00:00 "CCDM: Sheets not inserted in the given time period
(reported by CscwCcdmEntry(...))"
001A E002_E A400000 :4000 000DP01:38:00:00 "CCDM: Some or all notes or checks not taken by the
consumer"
001A E003_E A400000 :4000 000DP01:38:00:00 "CCDM: Some or all notes or checks not taken by the
consumer while retract to IO or box"
001A E004_E A400000 :4000 000DP01:38:00:00 "CCDM: Sheets available in the IO tray, e.g. rejected notes or
cheques after dispensing"
001A E009_E A400000 :4000 000DP01:38:00:00 "CCDM: A CCDM-Boot has been initiated by the operator"
001A E00A_E A400000 :4000 000DP01:38:00:00 "CCDM: Loaded firmware older than the firmware found on
disk"
001A E00B_E A400000 :4000 000DP01:38:00:00 "CCDM: There is no firmware loaded in the CCCDM"
001A E00C_E A400000 :4000 000DP01:38:00:00 "CCDM: Device handler was configured to switch LEDs when
customer action is neccessary"
001A E00E_E A400000 :4000 000DP01:38:00:00 "CCDM: The currently existing note table has not been
loaded by CSC-W32"
001A E010_E A400000 :4000 000DP01:38:00:00 "CCDM: Return of the function CscCcdmInit() if a new
currency file has been detected"
001A E011_E A400000 :4000 000DP01:38:00:00 "CCDM: Returned by the function CscCcdmInit() if a new
currency file has been detected"

May 2011 237

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001A E014_E A400000 :4000 000DP01:38:00:00 "CCDM: One or more new firmware loaded automatically by
the Device Handler"
001A E015_E A400000 :4000 000DP01:38:00:00 "CCDM: Current loaded note table inconsistant to sensor
Firmware"
001A E016_E A400000 :4000 000DP01:38:00:00 "CCDM: Registry parameter CASS_CONFIG is not correct"
001A F000_E A400000 :4000 000DP01:38:00:00 "CCDM: The firmware is not loaded in the CCDM"
001A F001_E A400000 :4000 000DP01:38:00:00 "CCDM: The parameters of the command have a wrong
syntax"
001A F002_E A400000 :4000 000DP01:38:00:00 "CCDM: One of the locks is active or an error occurred that
requires correction"
001A F003_E A400000 :4000 000DP01:38:00:00 "CCDM: An error occurred during the execution of the
command"
001A F004_E A400000 :4000 000DP01:38:00:00 "CCDM: The safe door must be open for the execution of the
actual command"
001A F005_E A400000 :4000 000DP01:38:00:00 "CCDM: The command cannot be executed at this point of
time"
001A F006_E A400000 :4000 000DP01:38:00:00 "CCDM: The application program tried to dispense a bundle,
but the IO-tray is empty"
001A F007_E A400000 :4000 000DP01:38:00:00 "CCDM: Customer did not remove the bundle until the
command has timed out"
001A F008_E A400000 :4000 000DP01:38:00:00 "CCDM: Cheques or sheets are not correct inserted"
001A F009_E A400000 :4000 000DP01:38:00:00 "CCDM: CCDM firmware initiated a boot"
001A F00A_E A400000 :4000 000DP01:38:00:00 "CCDM: Note sensor module reports hardware error"
001A F00B_E A400000 :4000 000DP01:38:00:00 "CCDM: Note sensor module reports firmware error"
001A F00C_E A400000 :4000 000DP01:38:00:00 "CCDM: Comunication error reported by the sensor module"
001A F00D_E A400000 :4000 000DP01:38:00:00 "CCDM: Note sensor hase detected an error in the data
format"
001A F00E_E A400000 :4000 000DP01:38:00:00 "CCDM: Note sensor has detected an error in the note table"
001A F00F_E A400000 :4000 000DP01:38:00:00 "CCDM: The assignment of a note is wrong"
001A F010_E A400000 :4000 000DP01:38:00:00 "CCDM: The sensor couldn't read the document (note or
cheque)"
001A F011_E A400000 :4000 000DP01:38:00:00 "CCDM: An error occured during downloding of firmware or
currency data"
001A F012_E A400000 :4000 000DP01:38:00:00 "CCDM: The sensor responded with an unknown error code"
001A F0A0_E A400000 :4000 000DP01:38:00:00 "CCDM: Bundle with detected metal in tray"
001A F0A1_E A400000 :4000 000DP01:38:00:00 "CCDM: Tray is occupied with not dispensable notes or
cheques"
001A F0A2_E A400000 :4000 000DP01:38:00:00 "CCDM: A not specified tray error occurred"
001A F0A3_E A400000 :4000 000DP01:38:00:00 "CCDM: Shutter error while command CscCcdmCashIn"
001A F0A4_E A400000 :4000 000DP01:38:00:00 "CCDM: CscCcdmTransport command received, but the
ESCROW is empty"
001A F0A5_E A400000 :4000 000DP01:38:00:00 "CCDM: ESCROW full while dispending a bundle"
001A F0A6_E A400000 :4000 000DP01:38:00:00 "CCDM: Cheques or sheets on ESCROW while performing
the next transaction"
001A F0A7_E A400000 :4000 000DP01:38:00:00 "CCDM: Cheques or notes jammed on the ESCROW"
001A F0A8_E A400000 :4000 000DP01:38:00:00 "CCDM: There exists no hardware equipment to perform the
requested command"
001A F0A9_E A400000 :4000 000DP01:38:00:00 "CCDM: Sheets detected in front of IO tray before shutter
open"
AA1A DEFA_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Default error"
AA1A DEFA_W q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Default warning"
AA1A 0020_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: I1394 protocol timeout"
AA1A FE09_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: IEEE 1394 read command could
not be executed in the specified monitoring time"
AA1A FE0A_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: A IEEE 1394 read command is
cancelled by the user"
AA1A FE89_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CIN: The pointer "pData" is illegal"
AA1A FE9C_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: The length in DataSize is 0 (zero)"
AA1A FE9D_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CIN: The I1394_TS.DLL could not be
found in the PATH. Normally <CSCROOT>\DLL"
AA1A FE9E_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: The I1394_TS.DLL could not be
opened"
AA1A FE9F_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CIN: The I1394_UB.DLL could not be
found in the PATH. Normally <CSCROOT>\DLL"
AA1A FEA0_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: The I1394_UB.DLL could not be
opened"

238 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
AA1A FEA1_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CIN: The I1394_UB.DLL could not be
opened"
AA1A 0210_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Device is not
in working state"
AA1A 0305_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Size of buffer
is invalid"
AA1A 8010_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: No such
device instance"
AA1A 0100_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: The operation
was cancelled/aborted"
AA1A 0200_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: A non-critical
error occurred on the adapter"
AA1A 0250_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: The appli-
cation has already opened the specified adapter"
AA1A 0270_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: The operation
was cancelled because more bus resets"
AA1A 0300_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: The operation
was cancelled because a 1394 bus reset"
AA1A 0370_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 0500_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: The operation
requested failed because the local adapter is busy"
AA1A 0572_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error."
AA1A 0600_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: The driver
detected a bug in its execution logic"
AA1A 0639_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: The
isochronous channel number is already in use"
AA1A 0645_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: An
isochronous operation failed because of a FIFO"
AA1A 0658_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: An
isochronous operation failed because of a FIFO underrun"
AA1A 0671_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 06B2_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: An outgoing
response packet is not valid"
AA1A 0700_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: An operation
failed due to some lack of resources other"
AA1A 0900_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: The operation
requested is not applicable to the channel"
AA1A 0A00_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: The operation
requested is not possible at the channel's current state"
AA1A 0C00_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Adapters not
identified"
AA1A 0D00_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: A validation
check on a number of isochronous buffers failed"
AA1A 0D47_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 0F00_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: The request
passed to the miniport was invalid"
AA1A 0F50_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 0F73_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 1070_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: The requested
item was not found"
AA1A 1100_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: The request
valid, but adapter does not support the required functionality"
AA1A 1200_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 1300_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 1313_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 132A_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: The request
cannot be transmitted"
AA1A 1350_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: The request
cannot be transmitted"
AA1A 1409_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 1433_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 1450_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 1500_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 0001_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Operation
failed"
AA1A 0010_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Operation not
supported"

May 2011 239

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
AA1A 0030_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Operation
rejected"
AA1A 0110_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Packet pool
empty"
AA1A 0220_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Requested
power state transition not allowed"
AA1A 0280_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Operation
rejected, device is powered down"
AA1A 0302_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Invalid IO
control code"
AA1A 0304_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Requested
byte count does not match buffer size"
AA1A 0310_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Input buffer
too small"
AA1A 0320_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Output buffer
too small"
AA1A 0340_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Handle
already used by an object of this type"
AA1A 0341_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Handle
already used by an object of another type"
AA1A 0342_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Handle not
associated with required object"
AA1A 0350_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 0351_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error"
AA1A 0400_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Invalid config-
uration info type"
AA1A 0401_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Invalid local
host info type"
AA1A 0402_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Invalid local
host property type"
AA1A 0403_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Unsupported
type of lock operation"
AA1A 0404_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Unsupported
speed selected"
AA1A 1420_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Invalid handle in parameter block"
AA1A 1421_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Illegal device number was trans-
ferred when the handle was created"
AA1A 1424_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Device handler currently locked by
another user"
AA1A 8000_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Invalid parameter in command"
AA1A 8001_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: No document inserted"
AA1A 8002_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Device not
open"
AA1A 8003_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Request
timeout interval has expired"
AA1A 8008_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Invalid
parameter in function call"
AA1A 8020_E q010000 q010000 000CQ01:3F:00:01 "IEEE1394/CCDM_CHQ: Internal driver error: Memory
allocation failed"
BB1A DEFA_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Default error"
BB1A DEFA_W A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Default warning"
BB1A 0020_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: I1394 protocol timeout"
BB1A FE09_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: IEEE 1394 read command could not
be executed in the specified monitoring time"
BB1A FE0A_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: A IEEE 1394 read command is
cancelled by the user"
BB1A FE9C_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: The length in DataSize is 0 (zero)"
BB1A FE9E_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: The I1394_TS.DLL could not be
opened"
BB1A FEA0_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: The I1394_UB.DLL could not be
opened"
BB1A FE89_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: The pointer "pData" is illegal"
BB1A FE9D_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: The I1394_TS.DLL could not be
found in the PATH. Normally <CSCROOT>\DLL"
BB1A FE9F_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: The I1394_UB.DLL could not be
found in the PATH. Normally <CSCROOT>\DLL"
BB1A FEA1_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: The I1394_UB.DLL could not be
opened"

240 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
BB1A 0210_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Device is not in
working state"
BB1A 0305_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Size of buffer is
invalid"
BB1A 8010_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: No such device
instance"
BB1A 0100_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: The operation
was cancelled/aborted"
BB1A 0250_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: The application
has already opened the specified adapter"
BB1A 0270_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: The operation
was cancelled because more bus resets"
BB1A 0300_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: The operation
was cancelled because a 1394 bus reset"
BB1A 0370_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 0500_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: The operation
requested failed because the local adapter is busy"
BB1A 0572_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error."
BB1A 0600_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: The driver
detected a bug in its execution logic"
BB1A 0639_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: The
isochronous channel number is already in use"
BB1A 0645_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: An isochronous
operation failed because of a FIFO"
BB1A 0658_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: An isochronous
operation failed because of a FIFO underrun"
BB1A 0671_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 06B2_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: An outgoing
response packet is not valid"
BB1A 0700_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: An operation
failed due to some lack of resources other"
BB1A 0900_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: The operation
requested is not applicable to the channel"
BB1A 0A00_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: The operation
requested is not possible at the channel's current state"
BB1A 0C00_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Adapters not
identified"
BB1A 0D00_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: A validation
check on a number of isochronous buffers failed"
BB1A 0D47_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 0F00_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: The request
passed to the miniport was invalid"
BB1A 0F50_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 0F73_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 1070_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: The requested
item was not found"
BB1A 1100_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: The request
valid, but adapter does not support the required functionality"
BB1A 1200_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 1300_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 1313_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 132A_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: The request
cannot be transmitted"
BB1A 1350_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: The request
cannot be transmitted"
BB1A 1409_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 1433_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 1450_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 1500_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 0001_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Operation
failed"
BB1A 0010_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Operation not
supported"
BB1A 0030_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Operation
rejected"
BB1A 0110_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Packet pool
empty"

May 2011 241

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
BB1A 0200_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Device is
removed"
BB1A 0220_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Requested
power state transition not allowed"
BB1A 0280_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Operation
rejected, device is powered down"
BB1A 0302_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Invalid IO
control code"
BB1A 0304_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Requested byte
count does not match buffer size"
BB1A 0310_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Input buffer too
small"
BB1A 0320_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Output buffer
too small"
BB1A 0340_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Handle already
used by an object of this type"
BB1A 0341_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Handle already
used by an object of another type"
BB1A 0342_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Handle not
associated with required object"
BB1A 0350_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 0351_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error"
BB1A 0400_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Invalid configu-
ration info type"
BB1A 0401_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Invalid local
host info type"
BB1A 0402_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Invalid local
host property type"
BB1A 0403_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Unsupported
type of lock operation"
BB1A 0404_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Unsupported
speed selected"
BB1A 1420_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Invalid handle in parameter block"
BB1A 1421_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Illegal device number was trans-
ferred when the handle was created"
BB1A 1424_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Device handler currently locked by
another user"
BB1A 8000_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Invalid parameter in command"
BB1A 8001_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: No document inserted"
BB1A 8002_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Device not
open"
BB1A 8003_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Request
timeout interval has expired"
BB1A 8008_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Invalid
parameter in function call"
BB1A 8020_E A400000 :4000 000DP01:38:00:00 "IEEE1394/CCDM_CIN: Internal driver error: Memory
allocation failed"
CC1A DEFA_W A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: DEFAULT_WARNING"
CC1A DEFA_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: DEFAULT_ERROR"
CC1A 8000_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Unexpected descriptor was reported from
USB device"
CC1A 8001_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Device not found"
CC1A 8002_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Not enough memory available"
CC1A 8003_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: It was no endpoint found in the descriptor"
CC1A 8004_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: The creation of the list of USB devices
failed"
CC1A FE09_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: USB read command could not be
executed in the specified monitoring time"
CC1A FE0A_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: USB READ command is cancelled by the
user"
CC1A FE89_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: The pointer pData is illegal"
CC1A FE9C_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: The length in DataSize is 0 (zero)"
CC1A 0001_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: CRC error has been detected"
CC1A 0002_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Bit stuffing error has been detected"
CC1A 0003_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: DATA toggle mismatch has been
detected"
CC1A 0004_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: STALLPID has been detected, error is
reported by the USB host controller"

242 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
CC1A 0005_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: USB device is not responding, error is
reported by the USB host"
CC1A 0006_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: PID check has failed, error is reported by
the USB host controller"
CC1A 0007_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Unexpected PID detected, error is
reported by the USB host"
CC1A 0008_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Data overrun error detected, error is
reported by the USB host"
CC1A 0009_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Data underrun error detected, error is
reported by the USB host"
CC1A 000A_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Error code is reserved by the USB host
controller driver"
CC1A 000B_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Error code is reserved by the USB host
controller driver"
CC1A 000C_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Buffer overrun has been detected, error is
reported by the USB host"
CC1A 000D_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Buffer underrun has been detected, error
is reported by the USB host"
CC1A 000F_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Buffer was not accessed, error is reported
by the USB host"
CC1A 0010_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: FIFO error has been detected, PCI bus
latency was too long"
CC1A 0011_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: XACT error has been detected, error is
reported by the USB host"
CC1A 0012_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Device is babbling, data transfer phase
exceeds the USB frame length"
CC1A 0013_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Data buffer error has been detected, error
is reported by the USB host"
CC1A 0030_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Endpoint has been halted by the USB bus
driver USBD"
CC1A 0100_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Memory allocation attempt has failed,
error is reported by the USB bus"
CC1A 0200_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Invalid URB function code has been
passed, error is reported by the USB"
CC1A 0300_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Invalid parameter has been passed, error
is reported by the USB bus"
CC1A 0400_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: There are data transfer requests pending
for the device"
CC1A 0500_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Request has failed, error is reported by
the USB bus driver USBD"
CC1A 0600_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Invalid pipe handle has been passed,
error is reported by the USB bus"
CC1A 0700_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: There is not enough bandwidth available,
error is reported by the USB bus"
CC1A 0800_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Internal host controller error has been
detected"
CC1A 0900_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Short transfer has been detected, error is
reported by the USB bus"
CC1A 0A00_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Bad start frame has been specified, error
is reported by the USB bus"
CC1A 0B00_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Asynchronous request has failed, error is
reported by the USB bus driver"
CC1A 0C00_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: USB frame control is currently owned,
error is reported by the USB bus"
CC1A 0D00_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: USB frame control is currently not owned,
error is reported by the USB"
CC1A 0E00_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Operation is not supported, error is
reported by the USB bus driver"
CC1A 0F00_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Invalid configuration descriptor was
reported by the device"
CC1A 1000_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Operation has failed, error is reported by
the USBIO driver"
CC1A 1001_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Invalid input buffer has been passed to an
IOCTL operation"
CC1A 1002_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Invalid output buffer has been passed to
an IOCTL operation"
CC1A 1003_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: There is not enough system memory
available to complete the operation"

May 2011 243

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
CC1A 1004_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: There are read or write requests pending,
error is reported by the USBIO"
CC1A 1005_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: USB device is already configured, error is
reported by the USBIO"
CC1A 1006_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: The USB device is not configured, error is
reported by the USBIO driver"
CC1A 1007_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: There are open pipes, error is reported by
the USBIO driver"
CC1A 1008_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Either the handle is already bound to a
pipe"
CC1A 1009_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Handle is not bound to a pipe, error is
reported by the USBIO driver"
CC1A 100A_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: USB device has been removed from the
system"
CC1A 100B_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Specified control code is not supported"
CC1A 100C_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Operation has been timed out, error is
reported by the USBIO driver"
CC1A 100D_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Invalid recipient has been specified"
CC1A 100E_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Either an invalid request type has been
specified"
CC1A 100F_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Invalid IOCTL code has been specified,
error is reported by the USBIO"
CC1A 1010_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Direction of the data transfer request is
not supported by that pipe"
CC1A 1011_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Number of asynchronous data packets
specified in an asynchronous read"
CC1A 1012_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Memory resources are exhausted. This
error is reported by the USBIO driver"
CC1A 1013_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: The specified pipe was not found in the
current configuration"
CC1A 1014_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: An invalid asynchronous data packet has
been specified"
CC1A 1015_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: There are not enough system resources
to complete the operation"
CC1A 1016_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Specified interface was not found in the
current configuration"
CC1A 1017_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Operation cannot be executed while the
USB device is in the current state"
CC1A 1018_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Invalid parameter has been specified with
an IOCTL operation"
CC1A 1019_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Evaluation interval of the USBIO DEMO
version has expired"
CC1A 101A_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Invalid power state has been specified"
CC1A 101B_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Device has entered a power down state"
CC1A 101C_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: API version reported by the USBIO driver
does not match"
CC1A 101D_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Set configuration operation has failed,
error is reported by the USBIO"
CC1A 1080_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Operation has failed due to a restriction of
the USBIO LIGHT version"
CC1A 1081_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Operation has failed due to a restriction of
the USBIO LIGHT version"
CC1A 1082_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Operation has failed due to a restriction of
the USBIO LIGHT version"
CC1A 1083_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Operation has failed due to a restriction of
the USBIO LIGHT version"
CC1A 1084_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Operation has failed due to a restriction of
the USBIO LIGHT version"
CC1A 1085_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Operation has failed due to a restriction of
the USBIO LIGHT version"
CC1A 1086_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: The operation has failed due to a
restriction of the USBIO LIGHT version"
CC1A 1087_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Operation has failed due to a restriction of
the USBIO LIGHT version"
CC1A 1100_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: The specified device object does not
exist"
CC1A 1102_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Device object was opened, there is no
valid handle to execute the operation"

244 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
CC1A 1104_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Enumeration of the specified devices has
failed"
CC1A 1105_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Invalid parameter has been passed to a
function"
CC1A 1106_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Library setupapi.dll could not be loaded"
CC1A 1420_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Invalid handle in parameter block"
CC1A 1421_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Illegal device number was transferred
when the handle was created"
CC1A 1424_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Device handler currently locked by
another user"
CC1A 2000_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Set configuration request has failed"
CC1A 3000_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Buffer is too small, error is reported by the
USB bus driver USBD"
CC1A 4000_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Interface was not found, error is reported
by the USB bus driver USBD"
CC1A 5000_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Invalid pipe flags have been specified"
CC1A 6000_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: Operation has been timed out, error is
reported by the USB bus driver"
CC1A 7000_E A400000 :4000 000DP01:38:00:00 "USB/CCDM_CIN: USB device is gone, error is reported by
the USB bus driver USBD"
DD1A DEFA_W q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: DEFAULT_WARNING"
DD1A DEFA_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: DEFAULT_ERROR"
DD1A 1420_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Invalid handle in parameter block"
DD1A 1421_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Illegal device number was transferred
when the handle was created"
DD1A 1424_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Device handler currently locked by
another user"
DD1A 8000_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Unexpected descriptor was reported
from USB device"
DD1A 8001_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Device not found"
DD1A 8002_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Not enough memory available"
DD1A 8003_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: It was no endpoint found in the
descriptor"
DD1A 8004_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: The creation of the list of USB devices
failed"
DD1A FE09_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: USB read command could not be
executed in the specified monitoring time"
DD1A FE0A_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: USB READ command is cancelled by
the user"
DD1A FE89_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: The pointer pData is illegal"
DD1A FE9C_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: The length in DataSize is 0 (zero)"
DD1A 0001_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: CRC error has been detected"
DD1A 0002_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Bit stuffing error has been detected"
DD1A 0003_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: DATA toggle mismatch has been
detected"
DD1A 0004_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: STALLPID has been detected, error is
reported by the USB host controller"
DD1A 0005_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: USB device is not responding, error is
reported by the USB host"
DD1A 0006_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: PID check has failed, error is reported by
the USB host controller"
DD1A 0007_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Unexpected PID detected, error is
reported by the USB host"
DD1A 0008_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Data overrun error detected, error is
reported by the USB host"
DD1A 0009_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Data underrun error detected, error is
reported by the USB host"
DD1A 000A_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Error code is reserved by the USB host
controller driver"
DD1A 000B_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Error code is reserved by the USB host
controller driver"
DD1A 000C_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Buffer overrun has been detected, error
is reported by the USB host"
DD1A 000D_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Buffer underrun has been detected,
error is reported by the USB host"
DD1A 000F_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Buffer was not accessed, error is
reported by the USB host"

May 2011 245

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
DD1A 0010_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: FIFO error has been detected, PCI bus
latency was too long"
DD1A 0011_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: XACT error has been detected, error is
reported by the USB host"
DD1A 0012_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Device is babbling, data transfer phase
exceeds the USB frame length"
DD1A 0013_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Data buffer error has been detected,
error is reported by the USB host"
DD1A 0030_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Endpoint has been halted by the USB
bus driver USBD"
DD1A 0100_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Memory allocation attempt has failed,
error is reported by the USB bus"
DD1A 0200_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Invalid URB function code has been
passed, error is reported by the USB"
DD1A 0300_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Invalid parameter has been passed,
error is reported by the USB bus"
DD1A 0400_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: There are data transfer requests
pending for the device"
DD1A 0500_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Request has failed, error is reported by
the USB bus driver USBD"
DD1A 0600_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Invalid pipe handle has been passed,
error is reported by the USB bus"
DD1A 0700_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: There is not enough bandwidth
available, error is reported by the USB bus"
DD1A 0800_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Internal host controller error has been
detected"
DD1A 0900_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Short transfer has been detected, error
is reported by the USB bus"
DD1A 0A00_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Bad start frame has been specified, error
is reported by the USB bus"
DD1A 0B00_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Asynchronous request has failed, error
is reported by the USB bus driver"
DD1A 0C00_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: USB frame control is currently owned,
error is reported by the USB bus"
DD1A 0D00_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: USB frame control is currently not
owned, error is reported by the USB"
DD1A 0E00_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Operation is not supported, error is
reported by the USB bus driver"
DD1A 0F00_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Invalid configuration descriptor was
reported by the device"
DD1A 1000_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Operation has failed, error is reported by
the USBIO driver"
DD1A 1001_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Invalid input buffer has been passed to
an IOCTL operation"
DD1A 1002_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Invalid output buffer has been passed to
an IOCTL operation"
DD1A 1003_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: There is not enough system memory
available to complete the operation"
DD1A 1004_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: There are read or write requests
pending, error is reported by the USBIO"
DD1A 1005_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: USB device is already configured, error
is reported by the USBIO"
DD1A 1006_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: The USB device is not configured, error
is reported by the USBIO driver"
DD1A 1007_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: There are open pipes, error is reported
by the USBIO driver"
DD1A 1008_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Either the handle is already bound to a
pipe"
DD1A 1009_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Handle is not bound to a pipe, error is
reported by the USBIO driver"
DD1A 100A_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: USB device has been removed from the
system"
DD1A 100B_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Specified control code is not supported"
DD1A 100C_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Operation has been timed out, error is
reported by the USBIO driver"
DD1A 100D_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Invalid recipient has been specified"
DD1A 100E_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Either an invalid request type has been
specified"

246 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
DD1A 100F_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Invalid IOCTL code has been specified,
error is reported by the USBIO"
DD1A 1010_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Direction of the data transfer request is
not supported by that pipe"
DD1A 1011_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Number of asynchronous data packets
specified in an asynchronous read"
DD1A 1012_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Memory resources are exhausted. This
error is reported by the USBIO driver"
DD1A 1013_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: The specified pipe was not found in the
current configuration"
DD1A 1014_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: An invalid asynchronous data packet
has been specified"
DD1A 1015_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: There are not enough system resources
to complete the operation"
DD1A 1016_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Specified interface was not found in the
current configuration"
DD1A 1017_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Operation cannot be executed while the
USB device is in the current state"
DD1A 1018_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Invalid parameter has been specified
with an IOCTL operation"
DD1A 1019_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Evaluation interval of the USBIO DEMO
version has expired"
DD1A 101A_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Invalid power state has been specified"
DD1A 101B_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Device has entered a power down state"
DD1A 101C_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: API version reported by the USBIO
driver does not match"
DD1A 101D_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Set configuration operation has failed,
error is reported by the USBIO"
DD1A 1080_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Operation has failed due to a restriction
of the USBIO LIGHT version"
DD1A 1081_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Operation has failed due to a restriction
of the USBIO LIGHT version"
DD1A 1082_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Operation has failed due to a restriction
of the USBIO LIGHT version"
DD1A 1083_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Operation has failed due to a restriction
of the USBIO LIGHT version"
DD1A 1084_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Operation has failed due to a restriction
of the USBIO LIGHT version"
DD1A 1085_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Operation has failed due to a restriction
of the USBIO LIGHT version"
DD1A 1086_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: The operation has failed due to a
restriction of the USBIO LIGHT version"
DD1A 1087_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Operation has failed due to a restriction
of the USBIO LIGHT version"
DD1A 1100_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: The specified device object does not
exist"
DD1A 1102_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Device object was opened, there is no
valid handle to execute the operation"
DD1A 1104_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Enumeration of the specified devices
has failed"
DD1A 1105_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Invalid parameter has been passed to a
function"
DD1A 1106_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Library setupapi.dll could not be loaded"
DD1A 2000_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Set configuration request has failed"
DD1A 3000_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Buffer is too small, error is reported by
the USB bus driver USBD"
DD1A 4000_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Interface was not found, error is reported
by the USB bus driver USBD"
DD1A 5000_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Invalid pipe flags have been specified"
DD1A 6000_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: Operation has been timed out, error is
reported by the USB bus driver"
DD1A 7000_E q010000 q010000 000CQ01:3F:00:01 "USB/CCDM_CHQ: USB device is gone, error is reported by
the USB bus driver USBD"
EE1A FE06_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: COMM reports invalid spec. for the
protocol"
EE1A FE07_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: A COMM WRITE command is
cancelled by the user"
EE1A FE08_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: COMM WRITE command could not be
executed"

May 2011 247

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
EE1A FE09_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: A COMM READ command could not
be executed"
EE1A FE0A_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: A COMM READ command is cancelled
by the user"
EE1A FE0B_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The COMM driver reports a parity
error"
EE1A FE0C_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The COMM driver reports a general
error"
EE1A FE0F_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: Peripheral device did not answer"
EE1A FE13_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The channel was not initialized"
EE1A FE16_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The COMM driver reports a break"
EE1A FE7A_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The COMM driver reports a overrun
error"
EE1A FE7B_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The COMM driver reports a frameing
error"
EE1A FE85_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The COMM driver could not be
opened"
EE1A FE89_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The pointer pTxData is illegal"
EE1A FE8B_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: Called function is invalid for CscCom-
mOpen"
EE1A FE8C_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The peripheral device does not return
an STX"
EE1A FE8D_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The peripheral device does not return
an ETX"
EE1A FE8E_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: Block length does not agree with the
transmitted block length"
EE1A FE8F_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The block ID is invalid"
EE1A FE90_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: Received DID does not agree with the
transmitted DID"
EE1A FE91_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: Wrong command specification"
EE1A FE92_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The received acknowledge type is
invalid"
EE1A FE93_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: Max no of repeat transmissions
reached"
EE1A FE94_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: Max no of receive repeats has been
reached"
EE1A FE95_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: Monitoring time during transmission
has been exceeded"
EE1A FE96_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: Monitoring time during receive has
been exceeded"
EE1A FE97_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: Busy time from phys. device
excceeded"
EE1A FE98_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The protocol was cancelled"
EE1A FE9C_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The length in TxData is 0"
EE1A FE9D_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: CSCWISODLL could not be found in
the PATH"
EE1A FE9E_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The CSCWISODLL could not be
opened"
EE1A FEE0_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The peripheral device did not answer"
EE1A FEE1_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: Peripheral device did not answer as
expected"
EE1A FEE2_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The peripheral device is busy"
EE1A FEE3_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: Peripheral device did not answer as
expected"
EE1A FEE4_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: Max no. of repeat transmissions
reached"
EE1A FEE5_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: Device asked for termination"
EE1A FEE6_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: Peripheral device did not answer"
EE1A FEE7_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: Response of device not completely
received"
EE1A FEE8_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The header of the response is invalid"
EE1A FEE9_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: DID does not agree with the trans-
mitted DID"
EE1A FEEA_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: DID does not agree with the trans-
mitted device ID"
EE1A FEEB_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: Command spec. does not agree with
the transmitted command spec."

248 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
EE1A FEEC_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The response of the device has not
been completely received"
EE1A FEED_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: A cancel command has been called"
EE1A FEEF_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: A cancel command has been called"
EE1A FEF0_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The command could not be executed
because another command was still active"
EE1A FEF1_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The command was aborted by the
user. No entry will be made in the error log"
EE1A FEF2_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: The command could not be executed
because a cancel command was still active"
EE1A FEF3_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: A cancel command could not be
executed"
EE1A FEF4_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: Command could not be cancelled
because internal monitoring time exceeded"
EE1A FEF5_E A400000 :4000 000DP01:38:00:00 "COMM/CCDM_CIN: Internal error within the
CSCWISO.DLL"
FF1A FE06_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: COMM reports invalid spec. for the
protocol"
FF1A FE07_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: A COMM WRITE command is
cancelled by the user"
FF1A FE08_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: COMM WRITE command could not
be executed"
FF1A FE09_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: A COMM READ command could not
be executed"
FF1A FE0A_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: A COMM READ command is
cancelled by the user"
FF1A FE0B_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The COMM driver reports a parity
error"
FF1A FE0C_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The COMM driver reports a general
error"
FF1A FE0F_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: Peripheral device did not answer"
FF1A FE13_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The channel was not initialized"
FF1A FE16_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The COMM driver reports a break"
FF1A FE7A_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The COMM driver reports a overrun
error"
FF1A FE7B_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The COMM driver reports a frameing
error"
FF1A FE85_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The COMM driver could not be
opened"
FF1A FE89_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The pointer pTxData is illegal"
FF1A FE8B_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: Called function is invalid for CscCom-
mOpen"
FF1A FE8C_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The peripheral device does not return
an STX"
FF1A FE8D_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The peripheral device does not return
an ETX"
FF1A FE8E_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: Block length does not agree with the
transmitted block length"
FF1A FE8F_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The block ID is invalid"
FF1A FE90_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: Received DID does not agree with the
transmitted DID"
FF1A FE91_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: Wrong command specification"
FF1A FE92_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The received acknowledge type is
invalid"
FF1A FE93_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: Max no of repeat transmissions
reached"
FF1A FE94_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: Max no of receive repeats has been
reached"
FF1A FE95_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: Monitoring time during transmission
has been exceeded"
FF1A FE96_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: Monitoring time during receive has
been exceeded"
FF1A FE97_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: Busy time from phys. device
excceeded"
FF1A FE98_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The protocol was cancelled"
FF1A FE9C_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The length in TxData is 0"
FF1A FE9D_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: CSCWISODLL could not be found in
the PATH"

May 2011 249

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
FF1A FE9E_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The CSCWISODLL could not be
opened"
FF1A FEE0_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The peripheral device did not answer"
FF1A FEE1_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: Peripheral device did not answer as
expected"
FF1A FEE2_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The peripheral device is busy"
FF1A FEE3_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: Peripheral device did not answer as
expected"
FF1A FEE4_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: Max no. of repeat transmissions
reached"
FF1A FEE5_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: Device asked for termination"
FF1A FEE6_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: Peripheral device did not answer"
FF1A FEE7_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: Response of device not completely
received"
FF1A FEE8_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The header of the response is invalid"
FF1A FEE9_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: DID does not agree with the trans-
mitted DID"
FF1A FEEA_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: DID does not agree with the trans-
mitted device ID"
FF1A FEEB_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: Command spec. does not agree with
the transmitted command spec."
FF1A FEEC_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The response of the device has not
been completely received"
FF1A FEED_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: A cancel command has been called"
FF1A FEEF_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: A cancel command has been called"
FF1A FEF0_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The command could not be executed"
FF1A FEF1_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The command was aborted by the
user"
FF1A FEF2_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: The command could not be executed"
FF1A FEF3_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: A cancel command could not be
executed"
FF1A FEF4_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: Internal monitoring time exceeded"
FF1A FEF5_E q010000 q010000 000CQ01:3F:00:01 "COMM/CCDM_CHQ: Internal error within the
CSCWISO.DLL"

250 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Cash Cheque Deposit Module (Class: 001A_CHQ)

The following table lists the MDS Status codes assigned to the device class
Cash Cheque Deposit Module (CCDM) assigned to device class ChequeInFW.

Refer to section ”Error Class Mapping” on page 5.

Table 60: Cash Cheque Deposit Module (Class: 001A_CHQ)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
001A_CHQ DEFA_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: DEFAULT ERROR"
001A_CHQ DEFA_W q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: DEFAULT WARNING"
001A_CHQ 0001_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: No connection to dispenser module"
001A_CHQ 0002_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: No connection to amplifier logic"
001A_CHQ 0003_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: No connection to stacker logic"
001A_CHQ 0014_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: General firmware error"
001A_CHQ 0015_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Battery on controller board empty"
001A_CHQ 0016_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Safety switch active"
001A_CHQ 0017_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: System interface does not fetch the data from the
CCDM fast enough"
001A_CHQ 0018_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Invalid or missing configuration"
001A_CHQ 0019_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: The application overloads the CCDM hardware (too
many reset commands per time)"
001A_CHQ 001E_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error magnetic character reader"
001A_CHQ 0028_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error cheque/cash reader"
001A_CHQ 0029_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Firmware error cheque/cash reader"
001A_CHQ 002A_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Communication problem cheque/cash reader"
001A_CHQ 002B_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Data error cheque/cash reader"
001A_CHQ 002C_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Note table configuration not Ok"
001A_CHQ 002D_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: External light in cheque/cash reader"
001A_CHQ 002F_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Communication problems (time out)"
001A_CHQ 0030_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Communication problems"
001A_CHQ 0031_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Cheque/cash reader firmware and CCDM firmware
are incompatible"
001A_CHQ 0032_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: BEB module is defective"
001A_CHQ 0033_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Communication problems with cheque/cash reader"
001A_CHQ 0034_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: BEB note table configuration not Ok"
001A_CHQ 0035_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: BEB module is defective"
001A_CHQ 0036_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Communication problem from BEB to RS232
interface"
001A_CHQ 0037_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: BEB firmware and CCDM firmware are incom-
patible"
001A_CHQ 0038_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Communication problems RS232 interface <-> BEB
module"
001A_CHQ 003D_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor VLS"
001A_CHQ 003E_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor VLS"
001A_CHQ 003F_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor VLS"
001A_CHQ 0040_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor VLS"
001A_CHQ 0041_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor VLS1"
001A_CHQ 0042_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor ALS"
001A_CHQ 0043_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor ALS"
001A_CHQ 0044_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor ALS"
001A_CHQ 0045_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor ALS"
001A_CHQ 0046_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor SLS"
001A_CHQ 0047_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor SLS"
001A_CHQ 0048_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor ELS"
001A_CHQ 0049_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor RLS"

May 2011 251

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001A_CHQ 004A_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor RLS"
001A_CHQ 004B_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor VLS1"
001A_CHQ 004C_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor ELS"
001A_CHQ 004D_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor VLS10"
001A_CHQ 0050_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor KLS"
001A_CHQ 0051_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor KLS"
001A_CHQ 0052_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor KLS"
001A_CHQ 0053_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor KLS1"
001A_CHQ 0054_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor KLS2"
001A_CHQ 0055_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error photosensor KLS3"
001A_CHQ 0064_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Transport error detected before dispensing"
001A_CHQ 0065_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Paper jam detected during separation process"
001A_CHQ 0066_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: VLS6: media too long (media do not pass (VLS6)"
001A_CHQ 0067_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: VLS7: medium is expected but no media is coming"
001A_CHQ 0069_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: VLS7: media do not leave VLS7"
001A_CHQ 006A_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: VLS6: media do not leave VLS6"
001A_CHQ 006C_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Faulty extraction detected during dispensing
process"
001A_CHQ 006E_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Clearing error I/O tray. Media jam in the interme-
diary transport"
001A_CHQ 006F_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Clearing error I/O tray. Media jam in the I/O
transport"
001A_CHQ 0070_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Clearing error I/O tray. Media do not reached VLS"
001A_CHQ 0071_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Clearing error I/O tray. Media jam in the separation
area of the dispense"
001A_CHQ 0072_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Clearing error I/O tray. Media jam in the interme-
diary transport"
001A_CHQ 0073_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Clearing error I/O tray. Media jam in the interme-
diary transport"
001A_CHQ 0074_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Media jam in reject transport area"
001A_CHQ 0078_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Initialization error hinged transport 1 and/or 2"
001A_CHQ 0079_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Position error hingend transport 1. The end position
is not reached"
001A_CHQ 007A_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Position error hinged transport 2. The end position
is not reached"
001A_CHQ 0082_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Initialization error during setting the bundle width"
001A_CHQ 008C_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error on the cam disk"
001A_CHQ 008D_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error on the cam disk"
001A_CHQ 0090_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Shutter cannot be opened/closed."
001A_CHQ 0091_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error on metal detection module"
001A_CHQ 0096_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: VHS1: hardware error thickness measuring station"
001A_CHQ 0097_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: VHS1: hardware error thickness measuring station"
001A_CHQ 0098_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error of hall sensors"
001A_CHQ 00AA_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Initialization error of reject transport"
001A_CHQ 00AB_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Media jam in the reject transport area"
001A_CHQ 00B4_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Media jam in reject transport area"
001A_CHQ 00B5_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Clearing error storage transport. Media did not
passed VLS2"
001A_CHQ 00B6_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Media jam found in front of VLS12 during reject box
clearing => I/O box"
001A_CHQ 00B9_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Paper jam detected during separation process"
001A_CHQ 00BA_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Paper jam detected during separation process"
001A_CHQ 00BB_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Paper jam detected during separation process"
001A_CHQ 00BC_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Paper jam detected during separation process"
001A_CHQ 00BD_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Paper jam detected during separation process"
001A_CHQ 00C8_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Media in front oaf ALS1 or ALS1 defect"
001A_CHQ 00C9_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: ALS1: medium is expected but no media is coming"
001A_CHQ 00CA_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: ALS1: media too long (media do not pass the drum)"
001A_CHQ 00CB_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: ALS1: media is complete recognized but is too long"
001A_CHQ 00CC_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: ALS1: media jam in the drum"
001A_CHQ 00CD_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: ALS1: Media end is not detected during entering the
drum"
001A_CHQ 00CE_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: ALS1: Media end do not detected during leaving the
drum"

252 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001A_CHQ 012D_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Media jam in sensor transport at the 3-way
deflector"
001A_CHQ 012E_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Media jam in sensor transport at the reject deflector"
001A_CHQ 0136_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: BEB module not mounted or not properly connected
to the backplane"
001A_CHQ 0137_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: SLS3: unexpected media during transport from the
alignment module"
001A_CHQ 0138_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: SLS3: unexpected media during transport from the
escrow module"
001A_CHQ 0139_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: SLS3: media jam in sensor transport"
001A_CHQ 0140_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: SLS1: medium is expected but no media is coming"
001A_CHQ 0141_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: SLS1: unexpected document during transport from
the alignment module"
001A_CHQ 0142_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: SLS1: unexpected document during transport from
the escrow module"
001A_CHQ 0143_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Document jam in area -> document deflector ->
escrow/reject module"
001A_CHQ 0144_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Cheque/cash reader: unexpected media during
transport from the alignment module"
001A_CHQ 014A_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Document jam at the escrow module ELS1"
001A_CHQ 014B_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Document jam between sensor module and
cassette/reject module"
001A_CHQ 014C_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Document jam between sensor transport and reject
transport"
001A_CHQ 014D_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Cheque/cash reader: the gap between two media is
too small"
001A_CHQ 0190_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Escrow tape at ELS2 defective"
001A_CHQ 0191_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Escrow tape at ELS3 defective"
001A_CHQ 0192_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Document into escrow not expected"
001A_CHQ 0193_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Failure in ELS1 area"
001A_CHQ 0194_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Document missing or escrow empty"
001A_CHQ 0195_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Gap between two notes too long or jam at escrow
unit"
001A_CHQ 0196_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Initialisation not finished in the spezified time"
001A_CHQ 0197_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Document jam at the escrow unit"
001A_CHQ 01F5_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Incorrect deflector position"
001A_CHQ 01F6_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Jam between sensor module (paper deflectors) and
before RLS1"
001A_CHQ 01F7_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Document too short"
001A_CHQ 01F8_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Document too long"
001A_CHQ 0258_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Document jam at the escrow unit"
001A_CHQ 0259_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: RLS1: jam or medium too long"
001A_CHQ 025A_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: RLS1: medium missing at KLS2 (module entry)"
001A_CHQ 025B_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: KLS2: unexpected medium at module entry"
001A_CHQ 025C_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: KLS2: jam or medium too long"
001A_CHQ 025D_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Incorrect position of deflector in cassette module"
001A_CHQ 025E_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: KLS2: medium to retract box missing"
001A_CHQ 025F_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Retract cassette: jam or medium too long"
001A_CHQ 0260_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Incorrect position of deflector in cassette module 1"
001A_CHQ 0261_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: KLS2: medium to box 1 missing"
001A_CHQ 0262_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Cassette module 1: jam or medium too long"
001A_CHQ 0263_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Incorrect position of deflector in cassette module 2"
001A_CHQ 0264_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: KLS2: medium to box 2 missing"
001A_CHQ 0265_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Cassette module 2: jam or medium too long"
001A_CHQ 0266_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Media jam KLS5 - KSM"
001A_CHQ 0267_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error in cassette 1 during init"
001A_CHQ 0268_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error in cassette 2 during init"
001A_CHQ 0269_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error in cassette 1"
001A_CHQ 026A_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Incorrect position of deflector in transfer unit"
001A_CHQ 100F_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Device Handler not initialised"
001A_CHQ 1420_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Invalid handle in parameter block"
001A_CHQ 1421_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Illegal device number was transferred when the
handle was created"
001A_CHQ 1424_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Device handler currently locked by another user"
001A_CHQ 8000_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Invalid parameter in command"

May 2011 253

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001A_CHQ 8001_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: No document inserted"
001A_CHQ 8002_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Function CscPrtRead was called, but no MICR
mode via CscPrtControl selected"
001A_CHQ 8003_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: The CCDM device handler presumes MS-Windows
2000 or MS-Windows XP"
001A_CHQ 8004_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: There is still a document in the scanner"
001A_CHQ 8005_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: The CCDM-HW send unknown response to a
command"
001A_CHQ 8006_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Cannot open raw file (CCDM.RAW)"
001A_CHQ 8007_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error writing raw file (CCDM.RAW)"
001A_CHQ 8008_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: The shutter could not be opened"
001A_CHQ 8009_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: The shutter could not be closed"
001A_CHQ 800A_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Invalid CRC (check character) received with
encrypted line"
001A_CHQ 800B_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Wrong value for FRM_LOAD in Registry with
CSCCCDM"
001A_CHQ 800C_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Firmware loading could not be completed"
001A_CHQ 800D_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Wrong value for LED, LED_FLASH or LED_FREQ"
001A_CHQ 800E_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Wrong value for MAX_HEIGHT_CHEQUE,
MAX_HEIGHT_NOTES, MAX_WIDTH_CHEQUE"
001A_CHQ 800F_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Wrong value for the parameter
SCAN_FRONT_RED, SCAN_FRONT_GREEN"
001A_CHQ 8010_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Wrong value for SHUTTER_BEHAVIOUR in
Registry with CSCCCDM"
001A_CHQ 8011_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: The thread which receives the image/signature data
could not started"
001A_CHQ 8012_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: The thread which receives the image/signature data
could not stopped"
001A_CHQ 8013_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: The pointer "
001A_CHQ 8014_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: The transferred cheque data (pointer, length) is
illegal"
001A_CHQ 8015_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: No cheque number received while dispensing
cheques or sheets"
001A_CHQ 8016_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: An error occurred while opening a currency file"
001A_CHQ 8017_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: An error occurred while opening a currency file"
001A_CHQ 8018_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: The currency file is not dedicated for the installed
note sensor"
001A_CHQ 8019_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: A wrong keyword inside a currency file has been
detected"
001A_CHQ 801A_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: The loading of new currency data not possible"
001A_CHQ 801B_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: New currency file loaded during installation"
001A_CHQ 801C_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error occurred while opening firmware file"
001A_CHQ 801D_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error occured while reading sensor firmware file"
001A_CHQ 801E_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Firmware file is not dedicated for the installed
sensor"
001A_CHQ 801F_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Wrong value for SENS_FRM_LOAD in Registry
with CSCCCDM"
001A_CHQ 8020_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Not possible to read the current note table from the
note sensor"
001A_CHQ 8021_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Too much notes inserted"
001A_CHQ 8022_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Timeout while waiting for signature ID"
001A_CHQ 8023_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Number of detected cheques on ESCROW and
number of scanned cheques different"
001A_CHQ 8024_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error in previous transaction"
001A_CHQ 8025_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error in previous transaction"
001A_CHQ 8026_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error occurred while opening a sensor firmware file"
001A_CHQ 8027_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error occured while reading a CCDM firmware file"
001A_CHQ 8028_E q010000 q010000 000CQ01:3F:00:01 "CCDM: The firmware file is not valid for the current CCDM
hardware"
001A_CHQ 8030_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: The checksum of the signature data of a note is
wrong"
001A_CHQ 8031_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Invalid storing exceptions"
001A_CHQ 9201_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Illegal arguments calling IMACON.DLL"
001A_CHQ 9202_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Cannot open input file"
001A_CHQ 9203_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error reading input"
001A_CHQ 9204_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Cannot open output file"

254 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001A_CHQ 9205_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error writing output file"
001A_CHQ 9206_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Not enough memory"
001A_CHQ 9207_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Image too long"
001A_CHQ 9208_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Image too large (for TIF)"
001A_CHQ 9209_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Image too small (<1 row)"
001A_CHQ 920A_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error in final conversion step"
001A_CHQ 920B_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error in temp file access"
001A_CHQ 920C_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Error loading imareco.dll"
001A_CHQ 92E0_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: IMACON.DLL returns an error while generation of
JPG image"
001A_CHQ 92FF_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: IMACON.DLL returned undefined error"
001A_CHQ 9300_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Internal error while calling DQF.DLL"
001A_CHQ 9301_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Internal error while calling DQF.DLL"
001A_CHQ 9302_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Internal error while calling DQF.DLL"
001A_CHQ 9303_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Internal error while calling DQF.DLL"
001A_CHQ 9304_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Internal error while calling DQF.DLL"
001A_CHQ 9305_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Internal error while calling DQF.DLL"
001A_CHQ 93FF_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: DQF.DLL returned undefined error"
001A_CHQ E000_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Tray operating error (e.g. banknotes not correct
inserted)"
001A_CHQ E001_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Sheets not inserted in the given time period
(reported by CscwCcdmEntry(...))"
001A_CHQ E002_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Some or all notes or checks not taken by the
consumer"
001A_CHQ E003_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Some or all notes or checks not taken by the
consumer while retract to IO or box"
001A_CHQ E004_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Sheets available in the IO tray, e.g. rejected notes
or cheques after dispensing"
001A_CHQ E009_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: A CCDM-Boot has been initiated by the operator"
001A_CHQ E00A_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Loaded firmware older than the firmware found on
disk"
001A_CHQ E00B_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: There is no firmware loaded in the CCCDM"
001A_CHQ E00C_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Device handler was configured to switch LEDs
when customer action is neccessary"
001A_CHQ E00E_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: The currently existing note table has not been
loaded by CSC-W32"
001A_CHQ E010_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Return of the function CscCcdmInit() if a new
currency file has been detected"
001A_CHQ E011_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Returned by the function CscCcdmInit() if a new
currency file has been detected"
001A_CHQ E014_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: One or more new firmware loaded automatically by
the Device Handler"
001A_CHQ E015_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Current loaded note table inconsistant to sensor
Firmware"
001A_CHQ E016_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Registry parameter CASS_CONFIG is not correct"
001A_CHQ F000_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: The firmware is not loaded in the CCDM"
001A_CHQ F001_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: The parameters of the command have a wrong
syntax"
001A_CHQ F002_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: One of the locks is active or an error occurred that
requires correction"
001A_CHQ F003_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: An error occurred during the execution of the
command"
001A_CHQ F004_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: The safe door must be open for the execution of the
actual command"
001A_CHQ F005_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: The command cannot be executed at this point of
time"
001A_CHQ F006_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: The application program tried to dispense a bundle,
but the IO-tray is empty"
001A_CHQ F007_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Customer did not remove the bundle until the
command has timed out"
001A_CHQ F008_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Cheques or sheets are not correct inserted"
001A_CHQ F009_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: CCDM firmware initiated a boot"
001A_CHQ F00A_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Note sensor module reports hardware error"
001A_CHQ F00B_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Note sensor module reports firmware error"
001A_CHQ F00C_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Comunication error reported by the sensor module"
001A_CHQ F00D_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Note sensor hase detected an error in the data
format"

May 2011 255

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
001A_CHQ F00E_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Note sensor has detected an error in the note table"
001A_CHQ F00F_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: The assignment of a note is wrong"
001A_CHQ F010_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: The sensor couldn't read the document (note or
cheque)"
001A_CHQ F011_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: An error occured during downloding of firmware or
currency data"
001A_CHQ F012_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: The sensor responded with an unknown error code"
001A_CHQ F0A0_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Bundle with detected metal in tray"
001A_CHQ F0A1_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Tray is occupied with not dispensable notes or
cheques"
001A_CHQ F0A2_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: A not specified tray error occurred"
001A_CHQ F0A3_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Shutter error while command CscCcdmCashIn"
001A_CHQ F0A4_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: CscCcdmTransport command received, but the
ESCROW is empty"
001A_CHQ F0A5_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: ESCROW full while dispending a bundle"
001A_CHQ F0A6_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Cheques or sheets on ESCROW while performing
the next transaction"
001A_CHQ F0A7_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Cheques or notes jammed on the ESCROW"
001A_CHQ F0A8_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: There exists no hardware equipment to perform the
requested command"
001A_CHQ F0A9_E q010000 q010000 000CQ01:3F:00:01 "CCDM_CHQ: Sheets detected in front of IO tray before shutter
open"

256 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Encryption Decryption Module (Class: 000F)

The following table lists the MDS Status codes assigned to the device class
Encryption Decryption Module (EDM).

Table 61: Encryption Decryption Module (EDM) (Class: 000F)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
000F DEFA_W 000ED01:3A:40:40 "EDM: DEFAULT_WARNING"
000F DEFA_E 000ED01:3A:40:40 "EDM: DEFAULT_ERROR"
000F 8000_E 000ED01:3A:40:40 "EDM: An undefined internal error has occurred in the firmware"
000F 8001_E 000ED01:3A:40:40 "EDM: The firmware cannot execute the command"
000F 8002_E 000ED01:3A:40:40 "EDM: Key address not allowed"
000F 8003_E 000ED01:3A:40:40 "EDM: EDM RAM error"
000F 8004_E 000ED01:3A:40:40 "EDM: Parity error in key"
000F 8005_E 000ED01:3A:40:40 "EDM: Internal hardware E-PROM error"
000F 8006_E 000ED01:3A:40:40 "EDM: Internal hardware EE-PROM error"
000F 8007_E 000ED01:3A:40:40 "EDM: The EDM command does not exist"
000F 8008_E 000ED01:3A:40:40 "EDM: The EDM key RAM is defective"
000F 8009_E 000ED01:3A:40:40 "EDM: The transferred data length is invalid"
000F 800A_E 000ED01:3A:40:40 "EDM: An invalid block ID is in the V24 protocal"
000F 800B_E 000ED01:3A:40:40 "EDM: The device ID is invalid"
000F 800C_E 000ED01:3A:40:40 "EDM: Command already transferred to the EDM firmware"
000F 800D_E 000ED01:3A:40:40 "EDM: Command length and data length invalid"
000F 800E_E 000ED01:3A:40:40 "EDM: Output parameters not defined"
000F 800F_E 000ED01:3A:40:40 "EDM: Data contains invalid ASCII characters"
000F 8010_E 000ED01:3A:40:40 "EDM: Wrong sequence of commands"
000F 8011_E 000ED01:3A:40:40 "EDM: Wrong ID"
000F 8040_E 000ED01:3A:40:40 "EDM: No transaction active, command cannot be executed"
000F 8041_E 000ED01:3A:40:40 "EDM: No or not enough PIN numbers entered"
000F 8050_E 000ED01:3A:40:40 "EDM: Key-splitting E-PROM not connected or wrong"
000F 8051_E 000ED01:3A:40:40 "EDM: Checksum of key-splitting E-PROM is wrong"
000F 8052_E 000ED01:3A:40:40 "EDM: Parity error in key of the key-splitting E-PROM"
000F 8053_E 000ED01:3A:40:40 "EDM: Invalid table charater in key-splitting E-PROM"
000F 8060_E 000ED01:3A:40:40 "EDM: V24 connection PC to EDM was/is interrupted"
000F 8061_E 000ED01:3A:40:40 "EDM: Battery problem of EDM"
000F 8062_E 000ED01:3A:40:40 "EDM: EPP detects an error when entering a key"
000F 8101_E 000ED01:3A:40:40 "EDM: EDM not initialized"
000F 8102_E 000ED01:3A:40:40 "EDM: Length in the parameter cannot be divided by eight"
000F 8103_E 000ED01:3A:40:40 "EDM: The DLL command specification is invalid"
000F 8104_E 000ED01:3A:40:40 "EDM: The command parameters are incorrect"
000F 8105_E 000ED01:3A:40:40 "EDM: Invalid key number"
000F 8107_E 000ED01:3A:40:40 "EDM: Error during data transmission"
000F 810B_E 000ED01:3A:40:40 "EDM: Initialize vector has wrong length"
000F 810C_E 000ED01:3A:40:40 "EDM: No free space in IV array"
000F 810E_E 000ED01:3A:40:40 "EDM: System could not provide dynamic memory"
000F 8111_E 000ED01:3A:40:40 "EDM: Wrong maximum PIN length with job EdmStartPin"
000F 8112_E 000ED01:3A:40:40 "EDM: Wrong minimum PIN length with job EdmStartPin"
000F 8113_E 000ED01:3A:40:40 "EDM: Invalid field for leading zeros in the PIN structure"
000F 8114_E 000ED01:3A:40:40 "EDM: Invalid field for acknowledge key in the PIN structure"
000F 8115_E 000ED01:3A:40:40 "EDM: Invalid mode in the PIN structure"
000F 8116_E 000ED01:3A:40:40 "EDM: Wrong PIN position in PIN field"
000F 8118_E 000ED01:3A:40:40 "EDM: Wrong structure entry in field TestMode"
000F 8119_E 000ED01:3A:40:40 "EDM: Invalid number of PIN digits"
000F 811A_E 000ED01:3A:40:40 "EDM: This API is not supported by the device handler"
000F 811B_E 000ED01:3A:40:40 "EDM: The API could not be loaded"
000F 811C_E 000ED01:3A:40:40 "EDM: This function cannot be accessed with the firmware"
000F 811E_E 000ED01:3A:40:40 "EDM: Cannot access full length of data area in a structure"
000F 811F_E 000ED01:3A:40:40 "EDM: Invalid encryption mode specified for key reset"
000F 8120_E 000ED01:3A:40:40 "EDM: The total protocol monitoring time has been exceeded"
000F 8121_E 000ED01:3A:40:40 "EDM: The maximum number of receive repeats has been reached"

May 2011 257

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
000F 8122_E 000ED01:3A:40:40 "EDM: The received acknowledge type is invalid"
000F 8123_E 000ED01:3A:40:40 "EDM: Common protocol error in EPP response data"
000F 8124_E 000ED01:3A:40:40 "EDM: Key Generating Keys in REGISTRY/CSCINI are not correct"
000F 8125_E 000ED01:3A:40:40 "EDM: Invalid character in KGK Keyset in REGISTRY/CSCINI"
000F 8126_E 000ED01:3A:40:40 "EDM: Error when encrypting a Masterkey"
000F 8127_E 000ED01:3A:40:40 "EDM: The check is negativ"

Encryption Decryption Software (Class: 0011)

The following table lists the MDS Status codes assigned to the device class
Encryption Decryption Software (EDS).

Table 62: Encryption Decryption Software (EDS) (Class: 0011)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0011 DEFA_W 000ED01:3A:40:40 "EDS: DEFAULT_WARNING"
0011 DEFA_E 000ED01:3A:40:40 "EDS: DEFAULT_ERROR"
0011 8001_E 000ED01:3A:40:40 "EDS: No transport key is loaded"
0011 8002_E 000ED01:3A:40:40 "EDS: An invalid transport key is available"
0011 8003_E 000ED01:3A:40:40 "EDS: No CBC key is loaded"
0011 8004_E 000ED01:3A:40:40 "EDS: An invalid CBC key is available"
0011 8005_E 000ED01:3A:40:40 "EDS: No initial vector loaded"
0011 8007_E 000ED01:3A:40:40 "EDS: No ECB key is loaded"
0011 8008_E 000ED01:3A:40:40 "EDS: An invalid ECB key is available"
0011 800A_E 000ED01:3A:40:40 "EDS: The length specified in the parameter block is zero"
0011 800B_E 000ED01:3A:40:40 "EDS: Length specified in param. block cannot divided by eight"
0011 800C_E 000ED01:3A:40:40 "EDS: Error while accessing the CSCEDSKEY key file"

258 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Card Reader (Class: 0008/AA08)

The following table lists the MDS Status codes assigned to the device class
Card Reader and the assigned Card Reader USB class.

Refer to section ”Error Class Mapping” on page 5.

Table 63: Card Reader (Class: 0008/AA08)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0008 DEFA_E =0082 =82 000CR01:38:00:00 "CARD READER: DEFAULT_ERROR"
0008 DEFA_W =0082 =82 000CR01:3F:00:40 "CARD READER: DEFAULT_WARNING"
0008 0000_W =0084 =84 000CR01:00:00:00 "CARD READER: If no warning found"
0008 0000_E =0084 =84 000CR01:3F:00:40 "CARD READER: If no error found"
0008 1004_E =0084 =84 000CR01:3F:00:40 "CARD READER: Length of input buffer in parameter block invalid"
0008 1005_E =0084 =84 000CR01:3F:00:40 "CARD READER: Length of output buffer in parameter block invalid"
0008 100F_E =0084 =84 000CR01:3F:00:40 "CARD READER: Device handler not initialized (card trap ?)"
0008 1015_E =0084 =84 000CR01:3F:00:40 "CARD READER: Executed command not permitted or possible"
0008 1420_E =0084 =84 000CR01:3F:00:40 "CARD READER: Communication problem"
0008 1424_E =0084 =84 000CR01:3F:00:40 "CARD READER: Communication problem"
0008 E000_E =0084 =84 000CR01:3F:00:40 "CARD READER: Invalid command (internal error)"
0008 E001_E =0084 =84 000CR01:3F:00:40 "CARD READER: Parameters not correct"
0008 E002_E =0084 =84 000CR01:3F:00:40 "CARD READER: Command cannot be executed"
0008 E004_E =0084 =84 000CR01:3F:00:40 "CARD READER: Invalid data with a command"
0008 E006_E =0084 =84 000CR01:38:00:00 "CARD READER: Command cannot be executed, device is in
maintanance mode "
0008 E009_E =0084 =84 000CR01:38:00:00 "CARD READER: Internal encountered in firmware of IDCU device"
0008 E00A_E =8082 =82 000CR01:3F:42:40 "CARD READER: Card jammed (possible manipulation)"
0008 E00B_E =8082 =82 000CR01:3F:60:48 "CARD READER: The sensors report an invalid position of the
shutter"
0008 E00C_E =0082 =82 000CR01:3F:60:48 "CARD READER: Sensors are defect"
0008 E00D_E =0082 =82 000CR01:3F:60:48 "CARD READER: Card too long"
0008 E00E_E =00C0 =C0 000CR01:3F:60:48 "CARD READER: Card too short"
0008 E00F_E =0084 =84 000CR01:38:00:00 "CARD READER: Memory error"
0008 E010_E =0082 =82 000CR01:3F:60:48 "CARD READER: Card has shifted"
0008 E011_E =0082 =82 000CR01:3F:60:48 "CARD READER: The card is jammed"
0008 E012_E =0082 =82 000CR01:3F:00:40 "CARD READER: Shutter switch or width switch defective"
0008 E013_E =0084 =84 000CR01:3F:60:48 "CARD READER: Mechanical error of IDCU device"
0008 E014_E =0084 =84 000CR01:3E:42:40 "CARD READER: The data read from the cards have the wrong
parity"
0008 E015_E =0084 =84 000CR01:3E:42:40 "CARD READER: The card data could not be read"
0008 E016_E =00F4 =F4 000CR01:3E:42:40 "CARD READER: The WRITE data is faulty on the card"
0008 E017_E =0084 =84 000CR01:3E:42:40 "CARD READER: The end character only was found on the track
when read"
0008 E01E_E =0082 =82 000CR01:38:00:00 "CARD READER: Power fail during a command"
0008 E01F_E =0082 =82 000CR01:38:00:00 "CARD READER: The DSR signal is in OFF status"
0008 E028_E =0084 =84 000CR01:3F:40:60 "CARD READER: The card was removed during transport from the
output position to the reject box"
0008 E070_E =0084 =84 000CR01:38:00:00 "CARD READER: There is presently no firmware loaded in the
device"
0008 E071_E =0084 =84 000CR01:38:00:00 "CARD READER: There was a problem during the download of the
firmware"
0008 E100_E =0084 =84 000CR01:3E:42:40 "CARD READER: The card data could not be read"
0008 E101_E =8082 =82 000CR01:3E:48:40 "CARD READER: Card jammed in optional stacker unit (possible
manipulation)"
0008 E102_E =8082 =82 000CR01:3E:48:40 "CARD READER: No card in the dispenser"
0008 E104_E =8082 =82 000CR01:3E:48:40 "CARD READER: Card is clamped by the ID card unit"

May 2011 259

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
0008 E180_E =0084 =84 000CR01:3E:42:40 "CARD READER: The chip card controller in the IDU or the IC card is
defect"
0008 E182_E =0084 =84 000CR01:3E:42:40 "CARD READER: The chip card could not be activated"
0008 E183_E =0084 =84 000CR01:3E:42:40 "CARD READER: The chip card could not be deactivated"
0008 E184_E =0084 =84 000CR01:3E:42:40 "CARD READER: An error occurred during communication with the
chip card"
0008 E185_E =0084 =84 000CR01:3E:42:40 "CARD READER: A forced interruption command was received from
the chip card"
0008 E186_E =0084 =84 000CR01:3E:42:40 "CARD READER: Error detected in response from the chip card"
0008 E187_E =0084 =84 000CR01:3E:42:40 "CARD READER: The ATR information of the card is incorrect"
0008 7FFB_E =0084 =84 000CR01:3E:42:40 "CARD READER: Chip card mode or SAM configuration not
supported"
0008 7FFC_E =0084 =84 000CR01:38:00:00 "CARD READER: Flash memory needs to be reset"
0008 7FFD_E =0084 =84 000CR01:38:00:00 "CARD READER: Trigger level of transactions has been reached"
0008 7FFE_E =0084 =84 000CR01:38:00:00 "CARD READER: Error occurred during access of SEL DH to switch
LED's"
0008 7FFF_E =0084 =84 000CR01:38:00:00 "CARD READER: Temporary power failure between last job and
current job"
0008 F001_E =0084 =84 000CR01:3E:42:40 "CARD READER: Maximum number of tries per command is
reached"
0008 F002_E =0084 =84 000CR01:3E:42:40 "CARD READER: Not enough data received from IDCU"
0008 F003_E =0084 =84 000CR01:3F:00:40 "CARD READER: Error in communication protocal with IDCU"
0008 F004_E =0084 =84 000CR01:3F:00:40 "CARD READER: V24 line error No ENQ was sent"
0008 F005_E =0084 =84 000CR01:3F:00:40 "CARD READER: Response from IDCU is incorrect"
0008 F006_E =0084 =84 000CR01:3F:00:40 "CARD READER: Invalid status"
0008 F007_E =0084 =84 000CR01:3F:00:40 "CARD READER: Invalid parameters with the command"
0008 F008_E =0084 =84 000CR01:3F:00:40 "CARD READER: Internal RESET not possible (internal error)"
0008 F009_E =0084 =84 000CR01:3F:00:40 "CARD READER: TYPE in Registry/CSCINI with CSCIDU is
incorrect"
0008 F00B_E =0084 =84 000CR01:3F:00:40 "CARD READER: False value for ID_PM in Registry/CSCINI with
CSCIDU"
0008 F00C_E =0084 =84 000CR01:3F:00:40 "CARD READER: Wrong value for ID_PD in Registry/CSCINI with
CSCIDU"
0008 F00D_E =0084 =84 000CR01:3F:00:40 "CARD READER: False value for ID_WV in Registry/CSCINI with
CSCIDU"
0008 F00E_E =0084 =84 000CR01:3F:00:40 "CARD READER: False value for ID_SH in Registry/CSCINI with
CSCIDU"
0008 F00F_E =0084 =84 000CR01:3F:00:40 "CARD READER: Command is not available in this configuration"
0008 F011_E =0084 =84 000CR01:3F:00:40 "CARD READER: V24 send command not terminated with correct
length"
0008 F012_E =0084 =84 000CR01:3F:00:40 "CARD READER: NAK received as a response"
0008 F013_E =0084 =84 000CR01:3F:00:40 "CARD READER: CANCEL not possible"
0008 F014_E =0084 =84 000CR01:3F:00:40 "CARD READER: A CsclduCancel command has already been sent"
0008 F015_E =0084 =84 000CR01:3E:42:40 "CARD READER: No card in the unit to perform the command"
0008 F016_E =0084 =84 000CR01:3F:00:40 "CARD READER: Wrong value for MSS in Registry/CSCINI with
CSCIDU"
0008 F017_E =0084 =84 000CR01:3F:00:40 "CARD READER: The device handler MSS could not be loaded"
0008 F018_E =0084 =84 000CR01:3F:00:40 "CARD READER: Wrong value for ID_WT in Registry/CSCINI with
CSCIDU"
0008 F019_E =0084 =84 000CR01:3F:00:40 "CARD READER: Wrong value for ID_RJ in Registry/CSCINI with
CSCIDU"
0008 F01A_E =0084 =84 000CR01:3F:00:40 "CARD READER: Wrong value for MAN_RECOG in Registry/CSCINI
with CSCIDU"
0008 F01B_E =0084 =84 000CR01:38:00:00 "CARD READER: The device handler CSCWHYBDLL could not be
loaded"
0008 F01C_E =0084 =84 000CR01:3F:00:40 "CARD READER: Wrong value for LED in Registry/CSCINI with
CSCIDU"
0008 F01D_E =0084 =84 000CR01:38:00:00 "CARD READER: The device handler CSCWSELDLL could not be
loaded"
0008 F01E_E =0084 =84 000CR01:38:00:00 "CARD READER: The device handler CSCWCITDLL could not be
loaded"
0008 F020_E =0084 =84 000CR01:38:00:00 "CARD READER: The specified firmware file has not the correct
format"
0008 F021_E =0084 =84 000CR01:38:00:00 "CARD READER: The parameter INIT_LOADER_CTL in the
Registry/CSCINI is incorrect"
0008 F022_E =0084 =84 000CR01:38:00:00 "CARD READER: DH CSCWTRADLL and /or CSCWESTDLL could
not be loaded"

260 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
0008 F023_E =0084 =84 000CR01:38:00:00 "CARD READER: TRANSACTION-ACTIVE in the Registry/CSCINI is
incorrect"
0008 F024_E =0084 =84 000CR01:38:00:00 "CARD READER: TRANSACTION-TRIGGER in the Registry/CSCINI
is incorrect"
0008 F025_E =0084 =84 000CR01:38:00:00 "CARD READER: ERROR-MAPPING in the Registry/CSCINI is
incorrect"
0008 F026_E =0084 =84 000CR01:38:00:00 "CARD READER: Parameter CHIPMODE in registry is incorrect"
0008 F027_E =0084 =84 000CR01:38:00:00 "CARD READER: Wrong value for ENTRY_HANDLING"
0008 F028_E =0084 =84 000CR01:38:00:00 "CARD READER: Device handler CSCSWI.DLL could not be loaded"
0008 F029_E =0084 =84 000CR01:38:00:00 "CARD READER: Device handler CSCEDS.DLL could not be loaded"
0008 F02A_E =0084 =84 000CR01:38:00:00 "CARD READER: Device handler CSCEDM.DLL could not be
loaded"
0008 F02B_E =0084 =84 000CR01:38:00:00 "CARD READER: Device handler CSCWICM.DLL could not be
loaded"
0008 F02C_E =0084 =84 000CR01:38:00:00 "CARD READER: Parameter SAMx_MODE incorrect"
0008 F02D_E =0084 =84 000CR01:38:00:00 "CARD READER: Parameter SAM incorrect"
0008 F02E_E =0084 =84 000CR01:38:00:00 "CARD READER: Device handler CSCWV2X.DLL could not be
loaded"
0008 F02F_E =0084 =84 000CR01:38:00:00 "CARD READER: Device handler CSCWHUS.DLL could not be
loaded"
0008 FE08_E =0084 =84 000CR01:38:00:00 "CARD READER: V24 Communication timeout"
0008 FE09_E =0084 =84 000CR01:38:00:00 "CARD READER: V24 Communication timeout"
0008 FE0A_E =0084 =84 000CR01:38:00:00 "CARD READER: V24 Communication error"
0008 FE7B_E =0082 =82 000CR01:00:00:00 "CARD READER: Initialization failed"
0008 FE85_E =0084 =84 000CR01:38:00:00 "CARD READER: Comm driver open failure, check line connection"
AA08 DEFA_W =0082 =82 000CR01:38:00:00 "USB/IDCU: DEFAULT_WARNING"
AA08 DEFA_E =0082 =82 000CR01:38:00:00 "USB/IDCU: DEFAULT_ERROR"
AA08 8000_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Unexpected descriptor was reported from USB device"
AA08 8001_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Device not found"
AA08 8002_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Not enough memory available"
AA08 8003_E =0082 =82 000CR01:38:00:00 "USB/IDCU: It was no endpoint found in the descriptor"
AA08 8004_E =0082 =82 000CR01:38:00:00 "USB/IDCU: The creation of the list of USB devices failed"
AA08 FE09_E =0082 =82 000CR01:38:00:00 "USB/IDCU: USB read command could not be executed in the
specified monitoring time"
AA08 FE0A_E =0082 =82 000CR01:38:00:00 "USB/IDCU: USB READ command is cancelled by the user"
AA08 FE89_E =0082 =82 000CR01:38:00:00 "USB/IDCU: The pointer pData is illegal"
AA08 FE9C_E =0082 =82 000CR01:38:00:00 "USB/IDCU: The length in DataSize is 0 (zero)"
AA08 0001_E =0082 =82 000CR01:38:00:00 "USB/IDCU: CRC error has been detected"
AA08 0002_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Bit stuffing error has been detected"
AA08 0003_E =0082 =82 000CR01:38:00:00 "USB/IDCU: DATA toggle mismatch has been detected"
AA08 0004_E =0082 =82 000CR01:38:00:00 "USB/IDCU: STALLPID has been detected, error is reported by the
USB host controller"
AA08 0005_E =0082 =82 000CR01:38:00:00 "USB/IDCU: USB device is not responding, error is reported by the
USB host"
AA08 0006_E =0082 =82 000CR01:38:00:00 "USB/IDCU: PID check has failed, error is reported by the USB host
controller"
AA08 0007_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Unexpected PID detected, error is reported by the USB
host"
AA08 0008_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Data overrun error detected, error is reported by the
USB host"
AA08 0009_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Data underrun error detected, error is reported by the
USB host"
AA08 000A_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Error code is reserved by the USB host controller driver"
AA08 000B_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Error code is reserved by the USB host controller driver"
AA08 000C_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Buffer overrun has been detected, error is reported by
the USB host"
AA08 000D_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Buffer underrun has been detected, error is reported by
the USB host"
AA08 000F_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Buffer was not accessed, error is reported by the USB
host"
AA08 0010_E =0082 =82 000CR01:38:00:00 "USB/IDCU: FIFO error has been detected, PCI bus latency was too
long"
AA08 0011_E =0082 =82 000CR01:38:00:00 "USB/IDCU: XACT error has been detected, error is reported by the
USB host"
AA08 0012_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Device is babbling, data transfer phase exceeds the
USB frame length"

May 2011 261

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
AA08 0013_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Data buffer error has been detected, error is reported by
the USB host"
AA08 0030_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Endpoint has been halted by the USB bus driver USBD"
AA08 0100_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Memory allocation attempt has failed, error is reported
by the USB bus"
AA08 0200_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Invalid URB function code has been passed, error is
reported by the USB"
AA08 0300_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Invalid parameter has been passed, error is reported by
the USB bus"
AA08 0400_E =0082 =82 000CR01:38:00:00 "USB/IDCU: There are data transfer requests pending for the device"
AA08 0500_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Request has failed, error is reported by the USB bus
driver USBD"
AA08 0600_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Invalid pipe handle has been passed, error is reported by
the USB bus"
AA08 0700_E =0082 =82 000CR01:38:00:00 "USB/IDCU: There is not enough bandwidth available, error is
reported by the USB bus"
AA08 0800_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Internal host controller error has been detected"
AA08 0900_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Short transfer has been detected, error is reported by the
USB bus"
AA08 0A00_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Bad start frame has been specified, error is reported by
the USB bus"
AA08 0B00_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Asynchronous request has failed, error is reported by the
USB bus driver"
AA08 0C00_E =0082 =82 000CR01:38:00:00 "USB/IDCU: USB frame control is currently owned, error is reported
by the USB bus"
AA08 0D00_E =0082 =82 000CR01:38:00:00 "USB/IDCU: USB frame control is currently not owned, error is
reported by the USB"
AA08 0E00_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Operation is not supported, error is reported by the USB
bus driver"
AA08 0F00_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Invalid configuration descriptor was reported by the
device"
AA08 1000_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Operation has failed, error is reported by the USBIO
driver"
AA08 1001_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Invalid input buffer has been passed to an IOCTL
operation"
AA08 1002_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Invalid output buffer has been passed to an IOCTL
operation"
AA08 1003_E =0082 =82 000CR01:38:00:00 "USB/IDCU: There is not enough system memory available to
complete the operation"
AA08 1004_E =0082 =82 000CR01:38:00:00 "USB/IDCU: There are read or write requests pending, error is
reported by the USBIO"
AA08 1005_E =0082 =82 000CR01:38:00:00 "USB/IDCU: USB device is already configured, error is reported by
the USBIO"
AA08 1006_E =0082 =82 000CR01:38:00:00 "USB/IDCU: The USB device is not configured, error is reported by
the USBIO driver"
AA08 1007_E =0082 =82 000CR01:38:00:00 "USB/IDCU: There are open pipes, error is reported by the USBIO
driver"
AA08 1008_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Either the handle is already bound to a pipe"
AA08 1009_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Handle is not bound to a pipe, error is reported by the
USBIO driver"
AA08 100A_E =0082 =82 000CR01:38:00:00 "USB/IDCU: USB device has been removed from the system"
AA08 100B_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Specified control code is not supported"
AA08 100C_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Operation has been timed out, error is reported by the
USBIO driver"
AA08 100D_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Invalid recipient has been specified"
AA08 100E_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Either an invalid request type has been specified"
AA08 100F_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Invalid IOCTL code has been specified, error is reported
by the USBIO"
AA08 1010_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Direction of the data transfer request is not supported by
that pipe"
AA08 1011_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Number of asynchronous data packets specified in an
asynchronous read"
AA08 1012_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Memory resources are exhausted. This error is reported
by the USBIO driver"
AA08 1013_E =0082 =82 000CR01:38:00:00 "USB/IDCU: The specified pipe was not found in the current configu-
ration"
AA08 1014_E =0082 =82 000CR01:38:00:00 "USB/IDCU: An invalid asynchronous data packet has been
specified"

262 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
AA08 1015_E =0082 =82 000CR01:38:00:00 "USB/IDCU: There are not enough system resources to complete the
operation"
AA08 1016_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Specified interface was not found in the current configu-
ration"
AA08 1017_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Operation cannot be executed while the USB device is
in the current state"
AA08 1018_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Invalid parameter has been specified with an IOCTL
operation"
AA08 1019_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Evaluation interval of the USBIO DEMO version has
expired"
AA08 101A_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Invalid power state has been specified"
AA08 101B_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Device has entered a power down state"
AA08 101C_E =0082 =82 000CR01:38:00:00 "USB/IDCU: API version reported by the USBIO driver does not
match"
AA08 101D_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Set configuration operation has failed, error is reported
by the USBIO"
AA08 1080_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA08 1081_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA08 1082_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA08 1083_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA08 1084_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA08 1085_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA08 1086_E =0082 =82 000CR01:38:00:00 "USB/IDCU: The operation has failed due to a restriction of the
USBIO LIGHT version"
AA08 1087_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA08 1100_E =0082 =82 000CR01:38:00:00 "USB/IDCU: The specified device object does not exist"
AA08 1102_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Device object was opened, there is no valid handle to
execute the operation"
AA08 1104_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Enumeration of the specified devices has failed"
AA08 1105_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Invalid parameter has been passed to a function"
AA08 1106_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Library setupapi.dll could not be loaded"
AA08 2000_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Set configuration request has failed"
AA08 3000_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Buffer is too small, error is reported by the USB bus
driver USBD"
AA08 4000_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Interface was not found, error is reported by the USB bus
driver USBD"
AA08 5000_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Invalid pipe flags have been specified"
AA08 6000_E =0082 =82 000CR01:38:00:00 "USB/IDCU: Operation has been timed out, error is reported by the
USB bus driver"
AA08 7000_E =0082 =82 000CR01:38:00:00 "USB/IDCU: USB device is gone, error is reported by the USB bus
driver USBD"

May 2011 263

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Deposit Module (Class: 0017/AA17)

The following table lists the MDS Status codes assigned to the device class
Deposit Module and USB assigned to the Deposit Module.

Refer to section ”Error Class Mapping” on page 5.

Table 64: Deposit Module (Class: 0017)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0017 DEFA_W A400000 :4000 000DP01:38:00:00 "DEPOSIT: DEFAULT_WARNING"
0017 DEFA_E A400000 :4000 000DP01:38:00:00 "DEPOSIT: DEFAULT_ERROR"
0017 0001_E A010000 :0000 000DP01:00:00:00 "DEPOSIT: Device handler was configured to switch LEDs"
0017 0002_E A010000 :0400 000DP01:38:00:00 "DEPOSIT: There is no firmware loaded"
0017 0003_E A010000 :0400 000DP01:38:00:00 "DEPOSIT: Cannot open or read the firmware file on disk"
0017 0004_E A010000 :0400 000DP01:38:00:00 "DEPOSIT: API-Function CscDpsOpen check validity of FW on Disk"
0017 1420_E A400000 :4000 000DP01:38:00:00 "DEPOSIT: Communication problem"
0017 8000_E A400000 :4000 000DP01:38:00:00 "DEPOSIT: Undefined error code"
0017 8001_E A400000 :4000 000DP01:38:00:00 "DEPOSIT: The DLL command specification is invalid"
0017 8002_E A400000 :4000 000DP01:38:00:00 "DEPOSIT: The DLL command specification is invalid"
0017 8003_E A480000 :4800 000DP01:3D:50:7F "DEPOSIT: Deposit cassette not installed correctly"
0017 8004_E A400000 :0400 000DP01:3E:42:40 "DEPOSIT: Job cannot be executed because envelope in transport
path"
0017 8005_E A010000 :4000 000DP01:3E:40:54 "DEPOSIT: Envelope jammed in transport path"
0017 8006_E A100000 :1000 000DP01:23:00:00 "DEPOSIT: Operator did not insert envelope during monitoring period"
0017 8007_E A010000 :0100 000DP01:23:00:03 "DEPOSIT: The envelope starting the feed operation"
0017 8008_E A010000 :4000 000DP01:3C:42:7F "DEPOSIT: Undefined status Defective sensor"
0017 8009_E A400000 :4000 000DP01:3C:42:7F "DEPOSIT: The dispensed envelope has not been"
0017 800A_E A400000 :4000 000DP01:3C:42:7F "DEPOSIT: Shutter could not be closed"
0017 800B_E A480000 :4800 000DP01:3D:60:7C "DEPOSIT: No envelopes available any longer"
0017 800C_E A400000 :4000 000DP01:3D:40:4B "DEPOSIT: Dispenser sensor could not detect the envelope"
0017 800D_E A200000 :2000 000DP01:3D:40:4E "DEPOSIT: End of the envelope reached before all chars could be
printed"
0017 800E_E A400000 :4000 000DP01:3D:40:4E "DEPOSIT: Print unit motor error"
0017 800F_E A400000 :4000 000DP01:3F:44:39 "DEPOSIT: Envelope under print head sensor could not detect
envelope"
0017 8010_E A400000 :4000 000DP01:3F:44:39 "DEPOSIT: Envelope in printer conveyor sensor could not detect
envelope"
0017 8011_E A400000 :4000 000DP01:3F:44:39 "DEPOSIT: Motor problem of conveyer transport"
0017 8012_E A400000 :4000 000DP01:3F:44:39 "DEPOSIT: Envelope in conveyor transport entry sensor could not
detect envelope"
0017 8013_E A400000 :4000 000DP01:3F:44:39 "DEPOSIT: Envelope in middle of conveyor transport sensor could not
detect envelope"
0017 8014_E A400000 :4000 000DP01:3F:44:39 "DEPOSIT: Envelope in conveyor transport exit sensor could not
detect envelope"
0017 8015_E A400000 :4000 000DP01:38:00:00 "DEPOSIT: No connection between print unit and conveyor transport"
0017 8016_E A400000 :4000 000DP01:38:00:00 "DEPOSIT: No envelope dispenser or programming error"
0017 8017_E A400000 :4000 000DP01:38:00:00 "DEPOSIT: Print head not locked or not available"
0017 8018_E A000004 :0000 000DP01:3E:40:54 "DEPOSIT: The inserted envelope is too long"
0017 8019_E A000010 :0000 000DP01:23:00:02 "DEPOSIT: No envelope detected after command"
0017 8020_E A400000 :0400 000DP01:3E:42:40 "DEPOSIT: Failure of Envelope in shutter sensor"
0017 8021_E A400000 :4000 000DP01:38:00:00 "DEPOSIT: Error when opening the bandage"
0017 8022_E A400000 :4000 000DP01:38:00:00 "DEPOSIT: Error when closing the bandage"
0017 8023_E A400000 :4000 000DP01:23:00:00 "DEPOSIT: Operator did not remove the offered envelope"
0017 8024_E A400000 :4000 000DP01:3C:42:7F "DEPOSIT: An error has occurred in the shutter"
0017 8025_E A400000 :4000 000DP01:3E:40:54 "DEPOSIT: An error has occurred on the bandage"
0017 80F0_E A101000 :1000 000DP01:24:00:00 "DEPOSIT: Job cancelled by CANCEL"

264 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
0017 8102_E A410000 :4001 000DP01:38:00:00 "DEPOSIT: Cannot access full length of data area in a structure"
0017 8104_E A410000 :0001 000DP01:38:00:00 "DEPOSIT: Active function cannot be cancelled"
0017 8105_E A410000 :0401 000DP01:38:00:00 "DEPOSIT: Cannot open the firmware file"
0017 8106_E A410000 :0401 000DP01:38:00:00 "DEPOSIT: Cannot read the firmware file to be loaded"
0017 8107_E A410000 :0401 000DP01:38:00:00 "DEPOSIT: Detect invalid firmware file data"
0017 8108_E A410000 :0401 000DP01:38:00:00 "DEPOSIT: Detect an invalid checksum of the firmware file data"
0017 8200_E A410000 :0401 000DP01:38:00:00 "DEPOSIT: A V24 WRITE command could not be executed"
0017 8201_E A410000 :0401 000DP01:38:00:00 "DEPOSIT: A V24 READ command could not be executed"
0017 8202_E A010000 :0100 000DP01:23:00:03 "DEPOSIT: Max no. of repeat transmissions reached"
0017 8203_E A010000 :0100 000DP01:23:00:03 "DEPOSIT: Max no. of receive repeats has been reached"
0017 8204_E A010000 :0100 000DP01:23:00:03 "DEPOSIT: Repetition counter expired"
0017 8205_E A400000 :4000 000DP01:38:00:00 "DEPOSIT: The received acknowledge type is invalid"
0017 8206_E A400000 :4000 000DP01:38:00:00 "DEPOSIT: Repetition counter expired"
0017 8207_E A400000 :4000 000DP01:38:00:00 "DEPOSIT: Expected block length does not match transmitted block
length"
0017 8208_E A010000 :0100 000DP01:23:00:03 "DEPOSIT: Error occurred during the CscDpsEntry job"
0017 8209_E A010000 :0100 000DP01:23:00:03 "DEPOSIT: The CscDpsEntry job was cancelled by the user"
0017 8300_E A010000 :0000 000DP01:00:00:00 "DEPOSIT: Wrong value for LED in Registry/CSCINI with CSCDPS"
0017 FE08_E A400000 :4000 000DP01:38:00:00 "DEPOSIT: V24 Communication timeout"
0017 FE09_E A400000 :4000 000DP01:38:00:00 "DEPOSIT: V24 Communication timeout"
0017 FE85_E A400000 :4000 000DP01:38:00:00 "DEPOSIT: Communication problem"
AA17 DEFA_W A400000 :4000 000DP01:38:00:00 "USB/DEP: DEFAULT_WARNING"
AA17 DEFA_E A400000 :4000 000DP01:38:00:00 "USB/DEP: DEFAULT_ERROR"
AA17 8000_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Unexpected descriptor was reported from USB device"
AA17 8001_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Device not found"
AA17 8002_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Not enough memory available"
AA17 8003_E A400000 :4000 000DP01:38:00:00 "USB/DEP: It was no endpoint found in the descriptor"
AA17 8004_E A400000 :4000 000DP01:38:00:00 "USB/DEP: The creation of the list of USB devices failed"
AA17 FE09_E A400000 :4000 000DP01:38:00:00 "USB/DEP: USB read command could not be executed in the specified
monitoring time"
AA17 FE0A_E A400000 :4000 000DP01:38:00:00 "USB/DEP: USB READ command is cancelled by the user"
AA17 FE89_E A400000 :4000 000DP01:38:00:00 "USB/DEP: The pointer pData is illegal"
AA17 FE9C_E A400000 :4000 000DP01:38:00:00 "USB/DEP: The length in DataSize is 0 (zero)"
AA17 0001_E A400000 :4000 000DP01:38:00:00 "USB/DEP: CRC error has been detected"
AA17 0002_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Bit stuffing error has been detected"
AA17 0003_E A400000 :4000 000DP01:38:00:00 "USB/DEP: DATA toggle mismatch has been detected"
AA17 0004_E A400000 :4000 000DP01:38:00:00 "USB/DEP: STALLPID has been detected, error is reported by the
USB host controller"
AA17 0005_E A400000 :4000 000DP01:38:00:00 "USB/DEP: USB device is not responding, error is reported by the
USB host"
AA17 0006_E A400000 :4000 000DP01:38:00:00 "USB/DEP: PID check has failed, error is reported by the USB host
controller"
AA17 0007_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Unexpected PID detected, error is reported by the USB
host"
AA17 0008_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Data overrun error detected, error is reported by the USB
host"
AA17 0009_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Data underrun error detected, error is reported by the USB
host"
AA17 000A_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Error code is reserved by the USB host controller driver"
AA17 000B_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Error code is reserved by the USB host controller driver"
AA17 000C_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Buffer overrun has been detected, error is reported by the
USB host"
AA17 000D_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Buffer underrun has been detected, error is reported by
the USB host"
AA17 000F_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Buffer was not accessed, error is reported by the USB
host"
AA17 0010_E A400000 :4000 000DP01:38:00:00 "USB/DEP: FIFO error has been detected, PCI bus latency was too
long"
AA17 0011_E A400000 :4000 000DP01:38:00:00 "USB/DEP: XACT error has been detected, error is reported by the
USB host"
AA17 0012_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Device is babbling, data transfer phase exceeds the USB
frame length"
AA17 0013_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Data buffer error has been detected, error is reported by
the USB host"
AA17 0030_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Endpoint has been halted by the USB bus driver USBD"

May 2011 265

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
AA17 0100_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Memory allocation attempt has failed, error is reported by
the USB bus"
AA17 0200_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Invalid URB function code has been passed, error is
reported by the USB"
AA17 0300_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Invalid parameter has been passed, error is reported by
the USB bus"
AA17 0400_E A400000 :4000 000DP01:38:00:00 "USB/DEP: There are data transfer requests pending for the device"
AA17 0500_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Request has failed, error is reported by the USB bus driver
USBD"
AA17 0600_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Invalid pipe handle has been passed, error is reported by
the USB bus"
AA17 0700_E A400000 :4000 000DP01:38:00:00 "USB/DEP: There is not enough bandwidth available, error is reported
by the USB bus"
AA17 0800_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Internal host controller error has been detected"
AA17 0900_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Short transfer has been detected, error is reported by the
USB bus"
AA17 0A00_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Bad start frame has been specified, error is reported by
the USB bus"
AA17 0B00_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Asynchronous request has failed, error is reported by the
USB bus driver"
AA17 0C00_E A400000 :4000 000DP01:38:00:00 "USB/DEP: USB frame control is currently owned, error is reported by
the USB bus"
AA17 0D00_E A400000 :4000 000DP01:38:00:00 "USB/DEP: USB frame control is currently not owned, error is reported
by the USB"
AA17 0E00_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Operation is not supported, error is reported by the USB
bus driver"
AA17 0F00_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Invalid configuration descriptor was reported by the
device"
AA17 1000_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Operation has failed, error is reported by the USBIO
driver"
AA17 1001_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Invalid input buffer has been passed to an IOCTL
operation"
AA17 1002_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Invalid output buffer has been passed to an IOCTL
operation"
AA17 1003_E A400000 :4000 000DP01:38:00:00 "USB/DEP: There is not enough system memory available to complete
the operation"
AA17 1004_E A400000 :4000 000DP01:38:00:00 "USB/DEP: There are read or write requests pending, error is reported
by the USBIO"
AA17 1005_E A400000 :4000 000DP01:38:00:00 "USB/DEP: USB device is already configured, error is reported by the
USBIO"
AA17 1006_E A400000 :4000 000DP01:38:00:00 "USB/DEP: The USB device is not configured, error is reported by the
USBIO driver"
AA17 1007_E A400000 :4000 000DP01:38:00:00 "USB/DEP: There are open pipes, error is reported by the USBIO
driver"
AA17 1008_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Either the handle is already bound to a pipe"
AA17 1009_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Handle is not bound to a pipe, error is reported by the
USBIO driver"
AA17 100A_E A400000 :4000 000DP01:38:00:00 "USB/DEP: USB device has been removed from the system"
AA17 100B_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Specified control code is not supported"
AA17 100C_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Operation has been timed out, error is reported by the
USBIO driver"
AA17 100D_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Invalid recipient has been specified"
AA17 100E_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Either an invalid request type has been specified"
AA17 100F_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Invalid IOCTL code has been specified, error is reported
by the USBIO"
AA17 1010_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Direction of the data transfer request is not supported by
that pipe"
AA17 1011_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Number of asynchronous data packets specified in an
asynchronous read"
AA17 1012_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Memory resources are exhausted. This error is reported
by the USBIO driver"
AA17 1013_E A400000 :4000 000DP01:38:00:00 "USB/DEP: The specified pipe was not found in the current configu-
ration"
AA17 1014_E A400000 :4000 000DP01:38:00:00 "USB/DEP: An invalid asynchronous data packet has been specified"
AA17 1015_E A400000 :4000 000DP01:38:00:00 "USB/DEP: There are not enough system resources to complete the
operation"
AA17 1016_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Specified interface was not found in the current configu-
ration"

266 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
AA17 1017_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Operation cannot be executed while the USB device is in
the current state"
AA17 1018_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Invalid parameter has been specified with an IOCTL
operation"
AA17 1019_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Evaluation interval of the USBIO DEMO version has
expired"
AA17 101A_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Invalid power state has been specified"
AA17 101B_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Device has entered a power down state"
AA17 101C_E A400000 :4000 000DP01:38:00:00 "USB/DEP: API version reported by the USBIO driver does not match"
AA17 101D_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Set configuration operation has failed, error is reported by
the USBIO"
AA17 1080_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA17 1081_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA17 1082_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA17 1083_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA17 1084_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA17 1085_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA17 1086_E A400000 :4000 000DP01:38:00:00 "USB/DEP: The operation has failed due to a restriction of the USBIO
LIGHT version"
AA17 1087_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA17 1100_E A400000 :4000 000DP01:38:00:00 "USB/DEP: The specified device object does not exist"
AA17 1102_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Device object was opened, there is no valid handle to
execute the operation"
AA17 1104_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Enumeration of the specified devices has failed"
AA17 1105_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Invalid parameter has been passed to a function"
AA17 1106_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Library setupapi.dll could not be loaded"
AA17 2000_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Set configuration request has failed"
AA17 3000_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Buffer is too small, error is reported by the USB bus driver
USBD"
AA17 4000_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Interface was not found, error is reported by the USB bus
driver USBD"
AA17 5000_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Invalid pipe flags have been specified"
AA17 6000_E A400000 :4000 000DP01:38:00:00 "USB/DEP: Operation has been timed out, error is reported by the
USB bus driver"
AA17 7000_E A400000 :4000 000DP01:38:00:00 "USB/DEP: USB device is gone, error is reported by the USB bus
driver USBD"

May 2011 267

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Vandal Guard (Class: 0015)

The following table lists the MDS Status codes assigned to the device class
Vandal Guard (Panel Protection Door (PPD)). This device is used in CSC450
ATM’s only.

Table 65: Vandal Guard (Class: 0015)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0015 DEFA_W 892 892 000VN01:38:00:00 "VANDAL GUARD: DEFAULT_WARNING"
0015 DEFA_E 892 892 000VN01:38:00:00 "VANDAL GUARD: DEFAULT_ERROR"
0015 8000_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Unknown internal error has occurred in FW"
0015 8020_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Block ID wrong"
0015 8021_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Device number wrong"
0015 8022_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Job specification wrong"
0015 8023_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Job longer than receive buffer"
0015 8024_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Syntax error in job specification"
0015 8030_E 892 892 000VN01:38:00:00 "VANDAL GUARD: No motion messages when door is opened"
0015 8040_E 892 892 000VN01:38:00:00 "VANDAL GUARD: The hardware error cannot be specified closer"
0015 8041_E 892 892 000VN01:38:00:00 "VANDAL GUARD: E-PROM faulty"
0015 8043_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Processor faulty"
0015 8044_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Checksum error in hardware RAM"
0015 8050_E 882 882 000VN01:3A:42:40 "VANDAL GUARD: The door could not be fully opened"
0015 8051_E 881 881 000VN01:3A:42:40 "VANDAL GUARD: Door cannot be closed completely"
0015 8052_E 880 880 000VN01:3A:70:40 "VANDAL GUARD: Contact bar without function"
0015 8053_E 880 880 000VN01:3A:42:40 "VANDAL GUARD: Light barrier is dirty or faulty"
0015 8054_E 880 880 000VN01:3A:42:40 "VANDAL GUARD: Door is difficult to operate"
0015 8055_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Firmware not loaded or started"
0015 80E0_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Charaters 1-3 not equal to decimal digits"
0015 80E1_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Block length not in valid area (3-250)"
0015 80E2_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Block length not equal to received block length"
0015 80E3_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Invalid Block ID (N,E)"
0015 80E4_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Invalid Device ID"
0015 80E5_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Invalid Job ID"
0015 80E6_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Invalid Job parameter"
0015 80E7_E 892 892 000VN01:38:00:00 "VANDAL GUARD: The last command has not been processed yet"
0015 80E8_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Firmware not loaded or started"
0015 80E9_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Wrong file length"
0015 80EA_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Memory for program module too small"
0015 80EB_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Invalid file check charater"
0015 80EC_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Hardware not functioning/faulty"
0015 8101_E 892 892 000VN01:38:00:00 "VANDAL GUARD: OS/2 reports error during memory request"
0015 8102_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Wrong/undefined charater job acknowledgment"
0015 8103_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Invalid data in response from peripheral controller"
0015 8104_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Invalid MODSEG ID in FRM file on the system"
0015 8105_E 892 892 000VN01:38:00:00 "VANDAL GUARD: The file *CTF was not found"
0015 8106_E 892 892 000VN01:38:00:00 "VANDAL GUARD: The file *FRM was not found"
0015 8107_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Error when opening a *CTF file"
0015 8108_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Error when opening a *FRM file"
0015 8109_E 892 892 000VN01:38:00:00 "VANDAL GUARD: Invalid data in the *CTF file"

268 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Motorized Door (Class: 000E)

The following table lists the MDS Status codes assigned to the device class
Motorized Door. This device is used in CSC250/550 old series ATM’s only.

Table 66: Motorized Door (Class: 000E)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
000E DEFA_W @00 @00 000DR01:38:00:00 "DOOR MODULE: DEFAULT_WARNING"
000E DEFA_E @00 @00 000DR01:38:00:00 "DOOR MODULE: DEFAULT_ERROR"
000E 8020_E @00 @00 000DR01:38:00:00 "DOOR MODULE: Block ID wrong"
000E 8021_E @00 @00 000DR01:38:00:00 "DOOR MODULE: Device number wrong"
000E 8022_E @00 @00 000DR01:38:00:00 "DOOR MODULE: Job specification wrong"
000E 8023_E @00 @00 000DR01:38:00:00 "DOOR MODULE: Return buffer too small"
000E 8024_E @00 @00 000DR01:38:00:00 "DOOR MODULE: Syntax error in job specification"
000E 8025_E @00 @00 000DR01:38:00:00 "DOOR MODULE: The last command has not been processed yet"
000E 8030_E @04 @04 000DR01:23:00:01 "DOOR MODULE: The door could not be fully opened"
000E 8031_E @04 @04 000DR01:23:00:01 "DOOR MODULE: Door cannot be closed completely Door is
blocked"
000E 8040_E @00 @00 000DR01:38:00:00 "DOOR MODULE: The hardware error cannot be specified closer"
000E 8041_E @00 @00 000DR01:38:00:00 "DOOR MODULE: E-PROM faulty"
000E 8042_E @00 @00 000DR01:38:00:00 "DOOR MODULE: EE-PROM faulty"
000E 8043_E @00 @00 000DR01:38:00:00 "DOOR MODULE: Processor faulty"
000E 8045_E @00 @00 000DR01:38:00:00 "DOOR MODULE: One or more light barriers are dirty or faulty"
000E 8046_E @00 @00 000DR01:38:00:00 "DOOR MODULE: Door open/close issued more than 3 times
quickly"
000E 8050_E @00 @00 000DR01:3A:36:41 "DOOR MODULE: Values of a number of photosensors are below
the minimum value"
000E 8051_E @00 @00 000DR01:3A:33:41 "DOOR MODULE: The light bulb in the cash output tray is defective"
000E 8052_E @00 @00 000DR01:3A:33:41 "DOOR MODULE: Door does not reach the open end position when
opened"
000E 8100_E @00 @00 000DR01:38:00:00 "DOOR MODULE: OS/2 report an error when requesting memory for
a data buffer"
000E 8101_E @00 @00 000DR01:38:00:00 "DOOR MODULE: The status of a non-existent light barrier was
requested"
000E 8102_E @00 @00 000DR01:38:00:00 "DOOR MODULE: The MDM hardware does not respond at OPEN"
000E 8FFF_E @00 @00 000DR01:38:00:00 "DOOR MODULE: Internal error"

Coin Out module (Class: 0021)

The following table lists the MDS Status codes assigned to the coin out device
class.

Table 67: Coin Out module (Class: 0021)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0021 DEFA_E G0335 G0335 000CN01:3E:33:33 "COINOUT: Default error"
0021 DEFA_W G0335 G0335 000CN01:3E:33:33 "COINOUT: Default warning"
0021 8001_E G0335 G0335 000CN01:3E:33:33 "COINOUT: There are no coins inside the hopper."
0021 8002_E G0335 G0335 000CN01:3E:33:33 "COINOUT: The hopper does not work properly."
0021 8003_E G0335 G0335 000CN01:3E:33:33 "COINOUT: Power supply failure with recovery."
0021 8004_E G0335 G0335 000CN01:3E:33:33 "COINOUT: Power supply failure without recovery."
0021 8005_E G0335 G0335 000CN01:3E:33:33 "COINOUT: Reset with recovery."
0021 8006_E G0335 G0335 000CN01:3E:33:33 "COINOUT: Reset without recovery."
0021 8007_E G0335 G0335 000CN01:3E:33:33 "COINOUT: Hopper not installed, the hopper was not connected
correctly."
0021 8008_E G0335 G0335 000CN01:3E:33:33 "COINOUT: The motor of the hopper is blocked."

May 2011 269

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
0021 8009_E G0335 G0335 000CN01:3E:33:33 "COINOUT: Photosensor failure, the photosensor does not work
properly."
0021 800A_E G0335 G0335 000CN01:3E:33:33 "COINOUT: The hopper is not connected, the wire is broken or the
motor does not work."
0021 801F_E G0335 G0335 000CN01:3E:33:33 "COINOUT: Invalid parameters. The parameters of a command are
out of range."
0021 8081_E G0335 G0335 000CN01:3E:33:33 "COINOUT: Coin exit has been detected over a period of time."
0021 8082_E G0335 G0335 000CN01:3E:33:33 "COINOUT: Coin exit has been detected within the payout unit or
shut down."
0021 8084_E G0335 G0335 000CN01:3E:33:33 "COINOUT: A number of intervals superior to the pre-set maximum."
0021 80FF_E G0335 G0335 000CN01:3E:33:33 "COINOUT: The hopper is not configured via registry."
0021 8100_E G0335 G0335 000CN01:3E:33:33 "COINOUT: The total protocol monitoring time during transmission
has been exceeded."
0021 8101_E G0335 G0335 000CN01:3E:33:33 "COINOUT: The total protocol monitoring time during receive has
been exceeded."
0021 8102_E G0335 G0335 000CN01:3E:33:33 "COINOUT: The received acknowledge type is invalid."
0021 8103_E G0335 G0335 000CN01:3E:33:33 "COINOUT: The maximum number of repeat transmissions has been
reached."
0021 8104_E G0335 G0335 000CN01:3E:33:33 "COINOUT: The maximum number of receive repeats has been
reached."
0021 8105_E G0335 G0335 000CN01:3E:33:33 "COINOUT: The number of coins per hopper to be paid out is invalid."
0021 8106_E G0335 G0335 000CN01:3E:33:33 "COINOUT: The low-level switch is set before a pay-out command."
0021 8107_E G0335 G0335 000CN01:3E:33:33 "COINOUT: Wrong value for LED, LED_FLASH or LED_FREQ in
Registry."
0021 8108_E G0335 G0335 000CN01:3E:33:33 "COINOUT: The number of requested coins is different from the
number of dispensed coins."
0021 8109_E G0335 G0335 000CN01:3E:33:33 "COINOUT: The number of requested coin-rollers is unequal to the
number of disbursed coin-rollers."
0021 810A_E G0335 G0335 000CN01:3E:33:33 "COINOUT: The number of rolls to be paid out is invalid."
0021 9000_E G0335 G0335 000CN01:3E:33:33 "COINOUT: An error occurred when accessing the SEL DH to switch
the LEDs."

Coin In module (Class: 0022)

The following table lists the MDS Status codes assigned to the coin in device
class.

Table 68: Coin In module (Class: 0022)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0022 DEFA_E A6A0000 :4000 000DP01:38:00:00 "COININ: Default error coin in"
0022 DEFA_W A6A0000 :4000 000DP01:38:00:00 "COININ: Default warning coin in"
0022 1420_E A6A0000 :4000 000DP01:38:00:00 "COININ: Communication problem"
0022 8001_E A6A0000 :4000 000DP01:38:00:00 "COININ: REIS module, the coin disk is jammed"
0022 8002_E A6A0000 :4000 000DP01:38:00:00 "COININ: REIS module, there is a jam at the counter section detected"
0022 8003_E A6A0000 :4000 000DP01:38:00:00 "COININ: REIS module, the main storage is missing"
0022 8004_E A6A0000 :4000 000DP01:38:00:00 "COININ: REIS module, voltage is too low"
0022 8005_E A6A0000 :4000 000DP01:38:00:00 "COININ: REIS module, there is an error at the real time clock detected"
0022 8006_E A6A0000 :4000 000DP01:38:00:00 "COININ: REIS module, 8 volt and/or 24 volt has been interrupted or not
present"
0022 8008_E A6A0000 :4000 000DP01:38:00:00 "COININ: REIS module, general error while the device coin recognition"
0022 800A_E A6A0000 :4000 000DP01:38:00:00 "COININ: REIS module, error while the coin transaction is executed
(calibrate error)"
0022 800B_E A6A0000 :4000 000DP01:38:00:00 "COININ: REIS module, error while the device is teaching (calibrate
error)"
0022 800C_E A6A0000 :4000 000DP01:38:00:00 "COININ: REIS module, the flap at the intermediate storage is jammed"
0022 800D_E A6A0000 :4000 000DP01:38:00:00 "COININ: REIS module, the flap at the main storage is jammed"
0022 800E_E A6A0000 :4000 000DP01:38:00:00 "COININ: REIS module, the coin funnel is not in the right position"
0022 800F_E A6A0000 :4000 000DP01:38:00:00 "COININ: REIS module, internal memory error"

270 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
0022 8015_E A6A0000 :4000 000DP01:38:00:00 "COININ: REIS module, the eject box was taken during the eject
process"
0022 8100_E A6A0000 :4000 000DP01:38:00:00 "COININ: The total protocol monitoring time during transmission has
been exceeded"
0022 8101_E A6A0000 :4000 000DP01:38:00:00 "COININ: The total monitoring time during receive has been exceeded"
0022 8102_E A6A0000 :4000 000DP01:38:00:00 "COININ: The received acknowledge type is invalid"
0022 8103_E A6A0000 :4000 000DP01:38:00:00 "COININ: The maximum number of repeat transmission has been
reached"
0022 8104_E A6A0000 :4000 000DP01:38:00:00 "COININ: The maximum number of receive retries has been reached"
0022 8110_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH, The memory needed for formatting cannot be
assigned"
0022 8200_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH, The command can currently not be executed"
0022 8201_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH, the device control on the system cannot be
started"
0022 8202_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH, no connection to the device control on the
system"
0022 8203_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH, problems when terminating the device control"
0022 8204_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH, monitoring time during transmission has been
exceeded"
0022 8205_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH, monitoring time during receive has been
exceeded"
0022 8206_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH, the total monitoring time for a command has
been exceeded"
0022 8207_E A6A0000 :4000 000DP01:38:00:00 "COININ: The maximum number of receive retries has been reached"
0022 8208_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH, An ongoing transaction was terminated abnor-
mally"
0022 8300_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, problem when opening or closing the
lock"
0022 8301_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, the device door is open"
0022 8302_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, the optical coin check is dirty"
0022 8303_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, error after device init"
0022 8304_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, hardware defect of escrow"
0022 8305_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, main storage (filling bags) are full"
0022 8306_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, left or right conveyor not logged on"
0022 8307_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, device error"
0022 8308_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, the conveyor can not be logged on"
0022 8309_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, configuration error"
0022 830A_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, unexpected reset of the CPU and/or
reset of HW counts"
0022 8400_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH, wrong value for LEDx, LEDx_FLASH or
LEDx_FREQ in registry"
0022 8401_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Right-hand conveyor unit blocked."
0022 8404_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Foreign matter detected"
0022 8405_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Counting problem. Shutter time-out."
0022 8407_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Counting problem could not be automat-
ically corrected."
0022 8408_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Internal software error."
0022 8409_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Exchange left conveyor. Maximum
service life reached."
0022 840A_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Exchange right conveyor. Maximum
service life reached."
0022 840B_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Return buffer error! Deposit command
rejected/failed."
0022 840C_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Coin return error!"
0022 840D_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Device initialization failed!"
0022 840E_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Hardware reset of the main CPU during
counting."
0022 840F_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Hardware reset. Main CPU reset after
counting."
0022 8410_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Initialization of CPU_layer failed."
0022 8411_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Foreign matter; initialization of conveyor
(units) failed."
0022 8412_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Return buffer initialization failed!"
0022 8413_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Communication error while counting."
0022 8414_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Communication error while counting."
0022 8415_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Communication error during return
buffer manipulation"

May 2011 271

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
0022 8416_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Communication error during return
buffer manipulation."
0022 8417_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Communication error in idle condition."
0022 8418_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Payment cannot be aborted! Command
failed at abort!"
0022 8419_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Payment cannot be aborted. Command
failed at abort."
0022 841A_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Payment cannot be aborted while return
buffer moves."
0022 841C_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Cashbox administration error."
0022 841D_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Error when writing to the conveyor
EEPROM"
0022 841E_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Error during configuration!"
0022 841F_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Dirty or covered coin slot photosensor."
0022 8420_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Dirty or covered filling level photo-
sensor."
0022 8421_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Foreign-matter detection enabled in idle
condition."
0022 8422_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Dirtying of left-hand coin check unit
detected in idle condition."
0022 8423_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Dirtying of right-hand coin check unit
detected in idle condition."
0022 8424_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Dirtying of both coin check units
detected in idle condition."
0022 8425_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Dirtying of left-hand coin check unit
detected."
0022 8426_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Dirtying of right-hand coin check unit
detected."
0022 8427_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Dirtying of both coin check units
detected."
0022 8428_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Stray coin missing at checking position."
0022 8429_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Eject error monitoring."
0022 842A_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Unexpected return buffer error - Coins in
escrow."
0022 842B_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Return buffer dirt below warning
threshold!"
0022 842C_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Return buffer error!"
0022 842D_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Escrow emptying. The photosensor in
the escrow is not clear."
0022 842E_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Coin on safety plate !"
0022 842F_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, CPU board initialization (during error
handling) failed. "
0022 8430_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Height/width checking triggered.
Automatic emptying of the coin module failed"
0022 8431_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Error when opening/closing the coin
module. Failure to open/close the coin"
0022 8432_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Error when opening/closing the shutter!"
0022 8433_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Error during return buffer handling!"
0022 8434_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, CoinEngine not okay, will not start, will
not respond."
0022 8500_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Timeout during loading the board
software"
0022 8501_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Error during loading the board software"
0022 8502_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Loading of board software is not
possible"
0022 8503_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH module, Loading of board software is not
possible"
0022 9000_E A6A0000 :4000 000DP01:38:00:00 "COININ: NOVOTECH, Error occurred accessing the LED's during coin
input/output"

272 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

P6 (P36) (Class: 0027)

The following table lists the MDS Status codes assigned to the P6 class.

Table 69: P6 (P36) (Class: 0027)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0027 DEFA_E A400000 :4000 000DP01:38:00:00 "P36: Default error"
0027 8000_E A400000 :4000 000DP01:38:00:00 "P36: Thread which receives signature data could not started"
0027 8001_E A400000 :4000 000DP01:38:00:00 "P36: Thread which receives signature data could not stopped"
0027 8002_E A400000 :4000 000DP01:38:00:00 "P36: Pointer pP36SigPara is illegal"
0027 F000_E A400000 :4000 000DP01:38:00:00 "P36: Received signature data (BIM hardware -> PC) has a checksum
error"
0027 F001_E A400000 :4000 000DP01:38:00:00 "P36: Received signature data is invalid (no StopID and StartID)"
0027 FFFE_E A400000 :4000 000DP01:38:00:00 "P36: Received signature data has a overflow error"
0027 FFFF_E A400000 :4000 000DP01:38:00:00 "P36: Received signature data (internal BIM -> hardware) has a
checksum error"

Printer (Class: 0032)

The following table lists the MDS Status codes assigned to printer class 0032.

Table 70: Printer (Class: 0032)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0032 DEFA_W 2820100 2820100 000PR01:30:00:00 "PRINTER: DEFAULT_WARNING"
0032 DEFA_E 2820100 2820100 000PR01:30:00:01 "PRINTER: DEFAULT_ERROR"
0032 1420_E 2820100 2820100 000PR01:38:60:00 "PRINTER: Communication problem"
0032 1424_E 2820100 2820100 000PR01:38:60:00 "PRINTER: The device is currently locked by another user"
0032 8001_E 2820100 2820100 000PR01:30:00:02 "PRINTER: If no error found"
0032 8002_E 2820100 2820100 000PR01:30:00:03 "PRINTER: If no error found"
0032 8003_E 2820100 2820100 000PR01:30:00:04 "PRINTER: Printer control code file could not be opened"
0032 8004_E 2820100 2820100 000PR01:30:00:05 "PRINTER: Bad format of the printer control code file"
0032 8005_E 2820100 2820100 000PR01:30:00:06 "PRINTER: Invalid format of the macro"
0032 8006_E 2820100 2820100 000PR01:30:00:07 "PRINTER: The format file is not available"
0032 8007_E 2820100 2820100 000PR01:30:00:08 "PRINTER: OPEN error of the format file"
0032 8008_E 2820100 2820100 000PR01:30:00:09 "PRINTER: Bad format of the format file"
0032 8009_E 2820100 2820100 000PR01:30:00:0A "PRINTER: Error while transmitting the status buffer"
0032 800A_E 2820100 2820100 000PR01:30:00:0B "PRINTER: The print buffer is too small"
0032 800B_E 2820100 2820100 000PR01:30:00:0C "PRINTER: No text from the FMT file was found"
0032 800C_E 2820100 2820100 000PR01:30:00:0D "PRINTER: If no error found"
0032 800D_E 2820100 2820100 000PR01:30:00:0E "PRINTER: If no error found"
0032 800E_E 2820100 2820100 000PR01:30:00:0F "PRINTER: If no error found"
0032 800F_E 2820100 2820100 000PR01:30:00:10 "PRINTER: Formatting error"
0032 8010_E 2820100 2820100 000PR01:30:00:11 "PRINTER: If no error found"
0032 8011_E 2820100 2820100 000PR01:38:60:00 "PRINTER: The printer-specific DLL could not be opened"
0032 8012_E 2820100 2820100 000PR01:30:00:12 "PRINTER: If no error found"
0032 8013_E 2820100 2820100 000PR01:30:00:13 "PRINTER: Unknown string format specification"
0032 8014_E 2820100 2820100 000PR01:30:00:14 "PRINTER: If no error found"
0032 8015_E 2820100 2820100 000PR01:30:00:15 "PRINTER: If no error found"

May 2011 273

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Printer ND71/74/98/9A/9C/9E/TH30 (Class: 0033)

The following table lists the MDS Status codes assigned to printer class 0033.

Table 71: Printer (Class: 0033)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0033 DEFA_W 2820100 2820100 000PR01:30:00:17 "JRN/REC: DEFAULT_WARNING"
0033 DEFA_E 2820100 2820100 000PR01:30:00:16 "JRN/REC: DEFAULT_ERROR"
0033 0001_W 2824100 2824100 000PR01:38:60:00 "JRN/REC: Communication problem"
0033 0001_E 2828000 2828000 000PR01:2D:50:00 "JRN/REC: Receipt paper low warning"
0033 0002_E 2810020 2810020 000PR02:2D:50:00 "JRN/REC: Journal paper low warning"
0033 0003_E 2810001 2810001 000PR01:30:00:18 "JRN/REC: Receipt still in output at OPEN on printer"
0033 1017_E 2820100 2820100 000PR01:38:60:00 "JRN/REC: Communication problem"
0033 1420_E 2820100 2820100 000PR01:38:60:00 "JRN/REC: Communication problem"
0033 8005_E 2820100 2820100 000PR01:30:41:30 "JRN/REC: Wrong macro format"
0033 8009_E 2820100 2820100 000PR01:3F:41:39 "JRN/REC: Printer hardware error"
0033 8100_E 2820100 2820100 000PR01:38:60:00 "JRN/REC: Printer hardware error"
0033 8101_E 2820100 2820100 000PR01:30:00:19 "JRN/REC: Loss of command after device error"
0033 8102_E 2820100 2820100 000PR01:38:60:00 "JRN/REC: Hardware error in memory test (RAM and ROM)"
0033 8103_E 2820100 2820100 000PR01:30:41:30 "JRN/REC: Syntax error in the ESCAPE sequence"
0033 8104_E 2820100 2820100 000PR01:30:00:1A "JRN/REC: Parity error"
0033 8105_E 2820100 2820100 000PR01:30:00:1B "JRN/REC: A checksum error is set"
0033 8106_E 2820100 2820100 000PR01:30:00:1C "JRN/REC: Short-term power failed"
0033 8107_E 2822100 2822100 000PR01:3D:60:00 "JRN/REC: Paper-out condition or paper jam"
0033 8108_E 2822100 2822100 000PR01:3D:60:00 "JRN/REC: Loss of command after receipt paper end"
0033 8109_E 2820100 2820100 000PR01:39:44:00 "JRN/REC: Receipt paper jam"
0033 810A_E 2820100 2820100 000PR01:39:44:00 "JRN/REC: Loss of command after paper jam"
0033 810B_E 2810081 2810081 000PR02:3D:60:00 "JRN/REC: Paper-out condition or paper jam"
0033 810C_E 2810081 2810081 000PR02:3D:60:00 "JRN/REC: Loss of command after receipt paper end"
0033 810D_E 2810001 2810001 000PR02:3D:60:00 "JRN/REC: Journal paper tear"
0033 810E_E 2810001 2810001 000PR02:3D:60:00 "JRN/REC: Loss of command after receipt paper end"
0033 810F_E 2810001 2810001 000PR01:38:60:00 "JRN/REC: The door is not properly closed"
0033 8110_E 2810001 2810001 000PR01:38:60:00 "JRN/REC: Loss of command because of open CSC door"
0033 8111_E 2810001 2810001 000PR01:38:60:00 "JRN/REC: Printer hardware error"
0033 8112_E 2810001 2810001 000PR01:38:60:00 "JRN/REC: Black dot mark not found"
0033 8201_E 2810001 2810001 000PR01:38:60:00 "JRN/REC: Cannot open control file ND9X.INI"
0033 8202_E 2810001 2810001 000PR01:38:60:00 "JRN/REC: Cannot read control file ND9X.INI"
0033 8203_E 2810001 2810001 000PR01:38:60:00 "JRN/REC: Cannot open a file or checksum incorrect"
0033 8204_E 2810001 2810001 000PR01:38:60:00 "JRN/REC: Cannot read the file to be loaded"
0033 8205_E 2810001 2810001 000PR01:38:60:00 "JRN/REC: File to be loaded has invalid module id"
0033 8206_E 2810001 2810001 000PR01:38:60:00 "JRN/REC: Expected response from firmware loader is incorrect"
0033 8207_E 2810001 2810001 000PR01:38:60:00 "JRN/REC: Invalid logo type for ND9C"
0033 8208_E 2810001 2810001 000PR01:38:60:00 "JRN/REC: Loaded file does not fit to printer hardware"
0033 FE08_E 2810001 2810001 000PR01:38:60:00 "JRN/REC: V24 Communication timeout"
0033 FE09_E 2810001 2810001 000PR01:38:60:00 "JRN/REC: V24 Communication timeout"

274 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Printer ND75/75S/94 (Class: 0034)

The following table lists the MDS Status codes assigned to printer class 0034.

Table 72: Printer (Class: 0034)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0034 DEFA_W 2840000 2840000 000PR01:38:60:00 "ND94: DEFAULT_WARNING"
0034 DEFA_E 2840000 2840000 000PR01:38:60:00 "ND94: DEFAULT_ERROR"
0034 0001_E 2840000 2840000 000PR01:2D:50:00 "ND94: Paper-low condition"
0034 0002_E 2840000 2840000 000PR01:2D:50:00 "ND94: Weekend limit reached"
0034 0003_E 2840000 2840000 000PR01:00:00:00 "ND94: FF command caused a feed to 1st line of 10th document"
0034 0004_E 2840000 2840000 000PR01:00:00:00 "ND94: The set limit for the reject box has been exceeded"
0034 8100_E 2840000 2840000 000PR01:38:60:00 "ND94: Error in the low-voltage power supply"
0034 8101_E 2840000 2840000 000PR01:39:44:00 "ND94: The carrier was moved manually"
0034 8102_E 2840000 2840000 000PR01:38:60:00 "ND94: Error in memory test(RAM and ROM)"
0034 8103_E 2840000 2840000 000PR01:3D:60:00 "ND94: The paper is used up completely"
0034 8104_E 2840000 2840000 000PR01:3E:41:00 "ND94: Paper jam, bad/missing mark on paper"
0034 8105_E 2840000 2840000 000PR01:3F:41:39 "ND94: Reset switch on the drum is faulty"
0034 8106_E 2840000 2840000 000PR01:3F:43:39 "ND94: The cutter is binding"
0034 8107_E 2840000 2840000 000PR01:39:46:00 "ND94: Paper jam in paper path"
0034 8108_E 2840000 2840000 000PR01:30:41:32 "ND94: FF command caused a feed to 1st line of 10th document"
0034 8109_E 2840000 2840000 000PR01:38:60:00 "ND94: Receipt(s) not removed before issuing a new print job"
0034 810A_E 2840000 2840000 000PR01:30:41:34 "ND94: Access to a non-existent font module"
0034 810B_E 2840000 2840000 000PR01:39:44:00 "ND94: Forms in gripper after 2 reject attempts"
0034 810C_E 2840000 2840000 000PR01:39:45:00 "ND94: External light when adjusting photosensor"
0034 810D_E 2840000 2840000 000PR01:39:44:00 "ND94: Rocker does not return to home position after cutting"
0034 810E_E 2840000 2840000 000PR01:39:44:00 "ND94: Remove stacker door does not open"
0034 810F_E 2840000 2840000 000PR01:00:00:00 "ND94: Cheque counter in Backup RAM deleted"
0034 8110_E 2840000 2840000 000PR01:3E:42:00 "ND94: Print control mark not found"
0034 8111_E 2840000 2840000 000PR01:38:60:00 "ND94: Printer hardware error"
0034 8112_E 2840000 2840000 000PR01:38:60:00 "ND94: If no error found"

Printer ND79 (Class: 0035)

The following table lists the MDS Status codes assigned to printer class 0035.

Table 73: Printer (Class: 0035)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0035 DEFA_W 2840000 2840000 000PR01:38:60:00 "ND79: DEFAULT_WARNING"
0035 DEFA_E 2840000 2840000 000PR01:38:60:00 "ND79: DEFAULT_ERROR"
0035 0001_E 2840000 2840000 000PR01:2D:50:00 "ND79: Receipt paper low warning"
0035 0003_E 2840000 2840000 000PR01:39:44:00 "ND79: Still a receipt in the output chute at an OPEN"
0035 0004_E 2840000 2840000 000PR01:2D:50:00 "ND79: Receipt paper low warning (last receipt printing)"
0035 8100_E 2840000 2840000 000PR01:3F:41:39 "ND79: Printer hardware error"
0035 8101_E 2840000 2840000 000PR01:3F:41:39 "ND79: Loss of command after device error"
0035 8103_E 2840000 2840000 000PR01:30:41:34 "ND79: Syntax error in the ESCAPE sequence for loading LOGO"
0035 8104_E 2840000 2840000 000PR01:3F:41:39 "ND79: A parity error is returned from a printer"
0035 8106_E 2840000 2840000 000PR01:38:60:00 "ND79: Short-term power failed on during operation"
0035 8107_E 2840000 2840000 000PR01:3D:60:00 "ND79: Paper-out condition or paper jam"
0035 8108_E 2840000 2840000 000PR01:3D:60:00 "ND79: Loss of command after receipt paper end"
0035 8109_E 2840000 2840000 000PR01:39:44:00 "ND79: Receipt paper jam"
0035 810A_E 2840000 2840000 000PR01:39:44:00 "ND79: Loss of command after paper jam"
0035 8111_E 2840000 2840000 000PR01:3F:41:39 "ND79: Printer hardware error"
0035 8112_E 2840000 2840000 000PR01:38:60:00 "ND79: The printer is in service position"

May 2011 275

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
0035 8113_E 2840000 2840000 000PR01:38:60:00 "ND79: Defective control instruction"
0035 8114_E 2840000 2840000 000PR01:38:60:00 "ND79: Job lost while printer in service position"

Printer ND99 (Class: 0038)

The following table lists the MDS Status codes assigned to printer class 0038.

Table 74: Printer (Class: 0038)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0038 DEFA_W 2820100 2820100 000PR01:38:60:00 "RECEIPT: DEFAULT_WARNING"
0038 DEFA_E 2820100 2820100 000PR01:38:60:00 "RECEIPT: DEFAULT_ERROR"
0038 0001_E 2828100 2828100 000PR01:2D:50:00 "RECEIPT: Receipt paper low warning"
0038 0002_E 2820100 2820100 000PR01:38:60:00 "RECEIPT: API function CscPrtOpen checks FW load file SWC728HEX"
0038 0003_E 2820100 2820100 000PR01:38:60:00 "RECEIPT: FW on disk different than SW loaded in printer"
0038 0004_E 2820100 2820100 000PR01:38:60:00 "RECEIPT: There is no firmware loaded"
0038 0005_E 2820100 2820100 000PR01:38:60:00 "RECEIPT: Loaded PRT FW has a release smaller than 0305"
0038 1005_E 2820100 2820100 000PR01:3F:41:39 "RECEIPT: Printer hardware error"
0038 1008_E 2820100 2820100 000PR01:3F:41:39 "RECEIPT: Printer USB communication error"
0038 1420_E 2820100 2820100 000PR01:38:60:00 "PRINTER: Communication problem"
0038 1424_E 2820100 2820100 000PR01:38:60:00 "PRINTER: The device is currently locked by another user"
0038 8100_E 2820100 2820100 000PR01:3F:41:39 "RECEIPT: Hardware error receipt presenter module"
0038 8101_E 2820100 2820100 000PR01:3E:42:00 "RECEIPT: Printer cannot recognize a top-of-form mark"
0038 8102_E 2820100 2820100 000PR01:39:44:00 "RECEIPT: The print head is lifted"
0038 8103_E 2820100 2820100 000PR01:30:41:34 "RECEIPT: Syntax error in ESCAPE sequence for loading LOGO"
0038 8104_E 2820100 2820100 000PR01:3F:41:39 "RECEIPT: A parity error is returned from a printer"
0038 8105_E 2820100 2820100 000PR01:3F:30:39 "RECEIPT: HW error occured at power ON (self-test)"
0038 8106_E 2820100 2820100 000PR01:38:60:00 "RECEIPT: Short-term power failed on during operation"
0038 8107_E 2822100 2822100 000PR01:3D:60:00 "RECEIPT: Paper-out, current form still printed"
0038 8108_E 2820100 2820100 000PR01:30:41:34 "RECEIPT: Non-existing user-defined character font selected"
0038 8109_E 2820100 2820100 000PR01:30:41:32 "RECEIPT: The printer buffer is overflow"
0038 810A_E 2820100 2820100 000PR01:30:41:31 "RECEIPT: Loss of command"
0038 810B_E 2820100 2820100 000PR01:39:44:00 "RECEIPT: Cutter not in home position"
0038 810C_E 2820100 2820100 000PR01:30:41:34 "RECEIPT: Syntax error in ESCAPE sequence for loading user chars."
0038 810D_E 2820100 2820100 000PR01:38:60:00 "RECEIPT: Firmware HEX-file SWC728HEX has no valid firmware
version"
0038 810E_E 2820100 2820100 000PR01:38:60:00 "RECEIPT: Recognized a faulty firmware load file SWC728HEX"
0038 810F_E 2820100 2820100 000PR01:38:60:00 "RECEIPT: No firmware is loaded"
0038 8110_E 2820100 2820100 000PR01:38:60:00 "RECEIPT: Loaded PRT FW has a release smaller than 0305"
0038 FE08_E 2820100 2820100 000PR01:38:60:00 "RECEIPT: V24 Communication timeout"
0038 FE09_E 2820100 2820100 000PR01:38:60:00 "RECEIPT: V24 Communication timeout"
0038 FE0B_E 2820100 2820100 000PR01:38:60:00 "RECEIPT: V24 Communication timeout"
0038 FE85_E 2820100 2820100 000PR01:38:60:00 "RECEIPT: V24 Communication problem"

276 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Printer ND97/TH97/TP01/NP01/TP05/NP05 (Class: 0039)

The following table lists the MDS Status codes assigned to class 0039.
Class AA39 is the CSC-W32 USB class 0003 that is assigned to the Statement
printer device.

Refer to section ”Error Class Mapping” on page 5.

Table 75: Printer (Class: 0039)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0039 DEFA_W 2840100 2840100 000SP01:3D:00:04 "ND/TH97: Default warning if no CSCW32 error found"
0039 DEFA_E 2840100 2840100 000SP01:3D:00:04 "ND/TH97: Default error if no CSCW32 error found"
0039 1006_E 2840100 2840100 000SP01:3D:00:04 "ND/TH97: Error"
0039 1427_E 2840100 2840100 000SP01:3D:00:04 "ND/TH97: Printer not accessable, occupied by another user"
0039 8100_E 2840100 2840100 000SP01:3E:40:04 "ND/TH97: Printer is not able to print graphices"
0039 8101_E 2840100 2840100 000SP01:3D:40:00 "ND/TH97: Application tries to get a monitor message, but monitor not
started yet"
0039 8102_E 2840100 2840100 000SP01:3F:00:01 "ND/TH97: Application tries to start the monitor, but it is already started"
0039 8103_E 2840100 2840100 000SP01:3F:00:08 "ND/TH97: Paper jam in transport path"
0039 8104_E 2840100 2840100 000SP01:3F:00:0B "ND/TH97: Paper jam, paper skew, bad/missing mark on paper, dirty
sensor"
0039 8105_E 2840100 2840100 000SP01:3B:00:09 "ND/TH97: Drum cover not locked, reset switch faulty, drive belt faulty"
0039 8106_E 2840100 2840100 000SP01:3B:00:09 "ND/TH97: The cutter is binding"
0039 8107_E 2840100 2840100 000SP01:3F:00:01 "ND/TH97: Paper jam in paper path"
0039 8108_E 2840100 2840100 000SP01:3F:00:11 "ND/TH97: Tray full, transport of more than 10 sheets attempted"
0039 8109_E 2840100 2840100 000SP01:3E:00:0A "ND/TH97: Sheets where not removed before new print job was issued"
0039 810A_E 2840100 2840100 000SP01:3F:40:40 "ND/TH97: Wrong access to a non-existent font module"
0039 810B_E 2840100 2840100 000SP01:3F:40:40 "ND/TH97: Document jam in transport path, 2 reject attempted"
0039 810C_E 2840100 2840100 000SP01:3F:40:40 "ND/TH97: External light when adjusting the photosensor"
0039 810D_E 2840100 2840100 000SP01:3A:00:0E "ND/TH97: Rocker does not return to home position after cutting"
0039 810E_E 2840100 2840100 000SP01:3E:00:0A "ND/TH97: Door is binding, stacker door open failure"
0039 8111_E 2840100 2840100 000SP01:3F:40:40 "ND/TH97: Printer hardware error"
0039 8112_E 2840100 2840100 000SP01:3F:40:40 "ND/TH97: Reject box overfilled"
0039 8113_E 2840100 2840100 000SP01:38:40:00 "ND/TH97: Printer firmware receives an internal SW error"
0039 8120_E 2840100 2840100 000SP01:3E:00:05 "ND/TH97: Drum cover not closed"
0039 8121_E 2840100 2840100 000SP01:3D:00:04 "ND/TH97: Selected paper lane not available"
0039 8122_E 2840100 2840100 000SP01:3D:00:04 "ND/TH97: Paper empty on lane 2"
0039 8123_E 2840100 2840100 000SP01:38:40:00 "ND/TH97: Documents not removed before issuing a new print job"
0039 8124_E 2840100 2840100 000SP01:38:40:00 "ND/TH97: Print job in graphics mode aborted"
0039 8125_E 2840100 2840100 000SP01:38:40:00 "ND/TH97: Internal software error during graphic print job"
0039 FE06_E 2840100 2840100 000SP01:3D:00:04 "ND/TH97: COMM port invalid protocol specification, check connection"
0039 FE08_E 2840100 2840100 000SP01:3D:00:04 "ND/TH97: V24 Communication timeout"
0039 FE09_E 2840100 2840100 000SP01:3D:00:04 "ND/TH97: V24 Communication timeout"
0039 FE0F_E 2840100 2840100 000SP01:3D:00:04 "ND/TH97: Protocol violation, device is switched off or did not answer"
0039 FE85_E 2840100 2840100 000SP01:3D:00:04 "ND/TH97: V24 Communication problem"
AA39 DEFA_W 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: DEFAULT_WARNING"
AA39 DEFA_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: DEFAULT_ERROR"
AA39 8000_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Unexpected descriptor was reported from USB device"
AA39 8001_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Device not found"
AA39 8002_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Not enough memory available"
AA39 8003_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: It was no endpoint found in the descriptor"
AA39 8004_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: The creation of the list of USB devices failed"
AA39 FE09_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: USB read command could not be executed in the
specified monitoring time"
AA39 FE0A_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: USB READ command is cancelled by the user"

May 2011 277

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
AA39 FE0F_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Protocol violation, device is switched off or did not
answer"
AA39 FE89_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: The pointer pData is illegal"
AA39 FE9C_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: The length in DataSize is 0 (zero)"
AA39 0001_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: CRC error has been detected"
AA39 0002_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Bit stuffing error has been detected"
AA39 0003_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: DATA toggle mismatch has been detected"
AA39 0004_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: STALLPID has been detected, error is reported by the
USB host controller"
AA39 0005_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: USB device is not responding, error is reported by the
USB host"
AA39 0006_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: PID check has failed, error is reported by the USB host
controller"
AA39 0007_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Unexpected PID detected, error is reported by the USB
host"
AA39 0008_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Data overrun error detected, error is reported by the
USB host"
AA39 0009_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Data underrun error detected, error is reported by the
USB host"
AA39 000A_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Error code is reserved by the USB host controller
driver"
AA39 000B_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Error code is reserved by the USB host controller
driver"
AA39 000C_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Buffer overrun has been detected, error is reported by
the USB host"
AA39 000D_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Buffer underrun has been detected, error is reported by
the USB host"
AA39 000F_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Buffer was not accessed, error is reported by the USB
host"
AA39 0010_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: FIFO error has been detected, PCI bus latency was too
long"
AA39 0011_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: XACT error has been detected, error is reported by the
USB host"
AA39 0012_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Device is babbling, data transfer phase exceeds the
USB frame length"
AA39 0013_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Data buffer error has been detected, error is reported
by the USB host"
AA39 0030_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Endpoint has been halted by the USB bus driver USBD"
AA39 0100_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Memory allocation attempt has failed, error is reported
by the USB bus"
AA39 0200_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Invalid URB function code has been passed, error is
reported by the USB"
AA39 0300_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Invalid parameter has been passed, error is reported by
the USB bus"
AA39 0400_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: There are data transfer requests pending for the
device"
AA39 0500_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Request has failed, error is reported by the USB bus
driver USBD"
AA39 0600_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Invalid pipe handle has been passed, error is reported
by the USB bus"
AA39 0700_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: There is not enough bandwidth available, error is
reported by the USB bus"
AA39 0800_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Internal host controller error has been detected"
AA39 0900_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Short transfer has been detected, error is reported by
the USB bus"
AA39 0A00_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Bad start frame has been specified, error is reported by
the USB bus"
AA39 0B00_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Asynchronous request has failed, error is reported by
the USB bus driver"
AA39 0C00_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: USB frame control is currently owned, error is reported
by the USB bus"
AA39 0D00_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: USB frame control is currently not owned, error is
reported by the USB"
AA39 0E00_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Operation is not supported, error is reported by the USB
bus driver"
AA39 0F00_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Invalid configuration descriptor was reported by the
device"
AA39 1000_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Operation has failed, error is reported by the USBIO
driver"

278 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
AA39 1001_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Invalid input buffer has been passed to an IOCTL
operation"
AA39 1002_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Invalid output buffer has been passed to an IOCTL
operation"
AA39 1003_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: There is not enough system memory available to
complete the operation"
AA39 1004_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: There are read or write requests pending, error is
reported by the USBIO"
AA39 1005_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: USB device is already configured, error is reported by
the USBIO"
AA39 1006_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: The USB device is not configured, error is reported by
the USBIO driver"
AA39 1007_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: There are open pipes, error is reported by the USBIO
driver"
AA39 1008_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Either the handle is already bound to a pipe"
AA39 1009_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Handle is not bound to a pipe, error is reported by the
USBIO driver"
AA39 100A_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: USB device has been removed from the system"
AA39 100B_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Specified control code is not supported"
AA39 100C_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Operation has been timed out, error is reported by the
USBIO driver"
AA39 100D_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Invalid recipient has been specified"
AA39 100E_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Either an invalid request type has been specified"
AA39 100F_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Invalid IOCTL code has been specified, error is
reported by the USBIO"
AA39 1010_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Direction of the data transfer request is not supported
by that pipe"
AA39 1011_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Number of asynchronous data packets specified in an
asynchronous read"
AA39 1012_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Memory resources are exhausted. This error is
reported by the USBIO driver"
AA39 1013_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: The specified pipe was not found in the current config-
uration"
AA39 1014_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: An invalid asynchronous data packet has been
specified"
AA39 1015_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: There are not enough system resources to complete
the operation"
AA39 1016_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Specified interface was not found in the current config-
uration"
AA39 1017_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Operation cannot be executed while the USB device is
in the current state"
AA39 1018_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Invalid parameter has been specified with an IOCTL
operation"
AA39 1019_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Evaluation interval of the USBIO DEMO version has
expired"
AA39 101A_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Invalid power state has been specified"
AA39 101B_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Device has entered a power down state"
AA39 101C_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: API version reported by the USBIO driver does not
match"
AA39 101D_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Set configuration operation has failed, error is reported
by the USBIO"
AA39 1080_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA39 1081_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA39 1082_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA39 1083_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA39 1084_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA39 1085_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA39 1086_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: The operation has failed due to a restriction of the
USBIO LIGHT version"
AA39 1087_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA39 1100_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: The specified device object does not exist"

May 2011 279

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
AA39 1102_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Device object was opened, there is no valid handle to
execute the operation"
AA39 1104_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Enumeration of the specified devices has failed"
AA39 1105_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Invalid parameter has been passed to a function"
AA39 1106_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Library setupapi.dll could not be loaded"
AA39 2000_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Set configuration request has failed"
AA39 3000_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Buffer is too small, error is reported by the USB bus
driver USBD"
AA39 4000_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Interface was not found, error is reported by the USB
bus driver USBD"
AA39 5000_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Invalid pipe flags have been specified"
AA39 6000_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: Operation has been timed out, error is reported by the
USB bus driver"
AA39 7000_E 2840100 2840100 000SP01:3D:00:04 "USB/DOCPRT: USB device is gone, error is reported by the USB bus
driver USBD"

SEAC Cheque Scanner (Class: 003D)

The following table lists the MDS Status codes assigned to class 003D.

Table 76: SEAC Cheque Scanner (Class: 003D)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
003D DEFA_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Cheque device jammed"
003D DEFA_W q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Cheque device jammed"
003D 1017_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Too many users, check line connection and configu-
ration"
003D 8000_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Invalid parameter"
003D 8001_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: No document inserted"
003D 8002_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Read called, but no MICR mode selected"
003D 8006_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Cannot open raw file"
003D 8007_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Error writing raw file"
003D 8008_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: The external shutter could not be opened"
003D 8009_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: The external shutter could not be closed"
003D 8100_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: The initialization of the scanner failed"
003D 8101_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Time out by waiting of return from firmware command"
003D 8110_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: There is still a document in the scanner"
003D 8200_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: The firmware file(s) is/are invalid"
003D 8201_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Error while loading the firmware file(s)"
003D 9001_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Invalid options or parameter"
003D 9002_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: The document feeder is empty"
003D 9003_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: A document is still in track"
003D 9004_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Command already active, device busy"
003D 9005_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Scanning is disabled by the API, FW not compatible"
003D 9006_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Feeder failed to start document"
003D 9007_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Time-out while document transport"
003D 9008_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: The document position not permit to try a recover"
003D 900A_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: A document is stuck or lost in track.."
003D 900B_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Time-out by waiting for codeline"
003D 900C_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Double feed, repeat the command if necessary"
003D 900D_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Problem writing image file"
003D 900E_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: SCSI error reported by ASPI during an interaction with
the CM3000"
003D 900F_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Image processing callback routine reports an error"
003D 9010_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: CM3API internal error, repeat the command if
necessary"
003D 9011_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: CM3API internal error, repeat the command if
necessary"
003D 9012_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Memory allocation failed"
003D 9013_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: The G4 compression routine reports an error"

280 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
003D 9014_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Tracking errer, no image or codeline data are available"
003D 9015_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: CM3API internal error, repeat the command if
necessary"
003D 9016_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Document is too long for the selected operation"
003D 9017_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: A hardware problem is reported by the OCR read head"
003D 9018_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: An attempt was made to use a device option which is not
present"
003D 9019_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Opening or closing the external shutter failed"
003D 901A_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Opening or closing the internal shutter failed"
003D 901B_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Error metal detector, the document have a staple"
003D 901C_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Ribbon cartridge is missing"
003D 901D_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: The scanner cannot process the required command"
003D 901E_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: CM3API.DLL internal error, repeat the command if
necessary"
003D 90FF_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: CM3API.DLL returned undefined error, check appli-
cation program"
003D 9201_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Illegal arguments calling IMACON.DLL"
003D 9202_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Cannot open input file"
003D 9203_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Error reading input"
003D 9204_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Cannot open output file"
003D 9205_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Error writing output file"
003D 9206_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Not enough memory, check application program"
003D 9207_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Image too long, check application program"
003D 9208_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Image too large"
003D 9209_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Image too small (<1 row)"
003D 92FF_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: IMACON.DLL returned undefined error"
003D 9300_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Internal error while calling DQF.DLL"
003D 9301_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Internal error while calling DQF.DLL"
003D 9302_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Internal error while calling DQF.DLL"
003D 9303_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Internal error while calling DQF.DLL"
003D 9304_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Internal error while calling DQF.DLL"
003D 9305_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: Internal error while calling DQF.DLL"
003D 93FF_E q010000 q010000 000CQ01:3F:00:01 "CHEQUE SEAC: DQF.DLL returned undefined error"

Printer TH21 (Class: 003E)

The following table lists the MDS Status codes assigned to printer class 003E.

Table 77: Printer (Class: 003E)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
003E DEFA_W 2820100 2820100 000PR01:38:60:00 "TH21: Default warning if no CSC-W32 error found"
003E DEFA_E 2820100 2820100 000PR01:38:60:00 "TH21: Default error if no CSC-W32 error found"
003E 0001_E 2828000 2828000 000PR01:2D:50:00 "TH21: Receipt paper low warning"
003E 8100_E 2820100 2820100 000PR01:3F:41:39 "TH21: Receipt paper empty"
003E 8101_E 2800000 2800000 000PR01:00:00:00 "TH21: Cover is properly opened"
003E 8102_E 2820100 2820100 000PR01:3F:41:39 "TH21: Print head temperature is not ok"
003E 8103_E 2820100 2820100 000PR01:3F:41:39 "TH21: Power lost"
003E 8104_E 2822100 2822100 000PR01:3D:60:00 "TH21: Paper jam"
003E 8105_E 2820100 2820100 000PR01:3F:41:39 "TH21: The cutter is binding"
003E 8106_E 2820100 2820100 000PR01:3F:41:39 "TH21: Hardware error, error in memory test"
003E 8120_E 2820100 2820100 000PR01:3F:41:39 "TH21: Communication error with monitoring module if in use"
003E 8121_E 2820100 2820100 000PR01:3F:41:39 "TH21: No GDI driver WN_TH21 found (when monitoring facility is used)"
003E 8122_E 2820100 2820100 000PR01:3F:41:39 "TH21: Invalid COM port entry for GDI driver (when monitoring facility is
used)"
003E 8201_E 2820100 2820100 000PR01:3F:41:39 "TH21: Cannot open control file TH21.INI"
003E 8202_E 2820100 2820100 000PR01:3F:41:39 "TH21: Cannot read control file TH21.INI"
003E 8203_E 2820100 2820100 000PR01:3F:41:39 "TH21: Cannot open a file or invalid file name give up"
003E 8204_E 2820100 2820100 000PR01:3F:41:39 "TH21: Printer hardware error, cannot read the file to be loaded"

May 2011 281

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
003E 8205_E 2820100 2820100 000PR01:3F:41:39 "TH21: File to be loaded has invalid module ID"
003E 8206_E 2820100 2820100 000PR01:3F:41:39 "TH21: The expected response to the FW loader is not correct"
003E 8207_E 2820100 2820100 000PR01:3F:41:39 "TH21: Invalid Logo type or logo file too big"

Printer Extensions (Class: 003F)

The following table lists the MDS Status codes assigned to printer class 003F.

Table 78: Printer (Class: 003F)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
003F DEFA_W 2820100 2820100 000PR01:38:60:00 "PRT GDI: Default warning if no CSC-W32 error found"
003F DEFA_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Default error if no CSC-W32 error found"
003F 1017_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Communication problem"
003F 1420_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Communication problem"

Printer Monitor ND9G (Class: 0040)

The following table lists the MDS Status codes assigned to printer class 0040.

Table 79: Printer (Class: 0040)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0040 DEFA_W 2820100 2820100 000PR01:38:60:00 "ND9G GDI: Default warning if no CSC-W32 error found"
0040 DEFA_E 2820100 2820100 000PR01:38:60:00 "ND9G GDI: Default error if no CSC-W32 error found"
0040 0001_E 2820100 2820100 000PR01:38:60:00 "ND9G GDI: Paper-out condition."
0040 0002_E 2820100 2820100 000PR01:38:60:00 "ND9G GDI: Terminate applications requiring the printer."
0040 0003_E 2020100 2020100 000PR01:39:44:00 "ND9G GDI: Receipt paper jam. Receipt could not be correctly
processed."
0040 0004_E 2820100 2820100 000PR01:38:60:00 "ND9G GDI: Hardware error: error in memory test (RAM and ROM),
backup RAM faulty."
0040 0005_E 2820100 2820100 000PR01:38:60:00 "ND9G GDI: Printer detect unexpected data."
0040 0006_E 2820100 2820100 000PR01:38:60:00 "ND9G GDI: A parity error is returned from the printer when faulty
characters are received."
0040 0007_E 2820100 2820100 000PR01:38:60:00 "ND9G GDI: Loss of a command. The command was sent and could not
be correctly executed."
0040 0009_E 2820800 2820800 000PR01:3E:42:48 "ND9G GDI: By activated mark, recognition a mark is not found."
0040 000A_E 2820100 2820100 000PR01:38:60:00 "ND9G GDI: A checksum error of the RAM is occurred."
0040 000B_E 2820100 2820100 000PR01:38:60:00 "ND9G GDI: The loaded firmware file does not fit to the printer
hardware."
0040 000D_E 2820100 2820100 000PR01:38:60:00 "ND9G GDI: Unexpected data was received."
0040 000E_E 2820100 2820100 000PR01:38:60:00 "ND9G GDI: A WRITE command could not be executed in the specified
monitoring time."
0040 000F_E 2820100 2820100 000PR01:38:60:00 "ND9G GDI: A READ command could not be executed in the specified
monitoring time."
0040 0010_E 2820100 2820100 000PR01:38:60:00 "ND9G GDI: Further control commands missing (e.g. Eject)"
0040 0011_E 2820100 2820100 000PR01:38:60:00 "ND9G GDI: An error occurred while the required line parameters were
being set."
0040 0012_E 2820100 2820100 000PR01:38:60:00 "ND9G GDI: An internal SW error occurred."
0040 0020_E 2820100 2820100 000PR01:38:60:00 "ND9G GDI: Cannot open a file or checksum of a file to be loaded is not
correct."
0040 0021_E 2820100 2820100 000PR01:38:60:00 "ND9G GDI: Cannot read the firmware file to be loaded."
0040 0022_E 2820100 2820100 000PR01:38:60:00 "ND9G GDI: Cannot read the file to be loaded."
0040 0023_E 2820100 2820100 000PR01:38:60:00 "ND9G GDI: The expected response of the Firmware Loader is not
correct."

282 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
0040 0024_E 2820100 2820100 000PR01:38:60:00 "ND9G GDI: Firmware file data do not reach the firmware controller
correctly."
0040 0025_E 2820100 2820100 000PR01:38:60:00 "ND9G GDI: An error occurred when the print system was started from
the CSC service."
0040 0001_W 2820100 2820100 000PR01:38:60:00 "ND9G GDI: Wrong value of entry FILE_CTR"
0040 0002_W 2820100 2820100 000PR01:38:60:00 "ND9G GDI: No entry FILE1 found in the Registry."

Printer Monitor TH21 (Class: 0041)

The following table lists the MDS Status codes assigned to printer class 0041.

Table 80: Printer (Class: 0041)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0041 DEFA_W 2820100 2820100 000PR01:38:60:00 "TH21 GDI: Default warning if no CSC-W32 error found"
0041 DEFA_E 2820100 2820100 000PR01:38:60:00 "TH21 GDI: Default error if no CSC-W32 error found"
0041 0001_E 2820100 2820100 000PR01:38:60:00 "TH21 GDI: Paper-out condition."
0041 0002_E 2820100 2820100 000PR01:38:60:00 "TH21 GDI: The cover is properly opened."
0041 0003_E 2820100 2820100 000PR01:38:60:00 "TH21 GDI: The print head temperature is not ok."
0041 0004_E 2820100 2820100 000PR01:38:60:00 "TH21 GDI: Power failure during operation or insufficient power supply."
0041 0005_E 2820100 2820100 000PR01:38:60:00 "TH21 GDI: Receipt paper jam. Receipt could not be correctly processed."
0041 0006_E 2820100 2820100 000PR01:38:60:00 "TH21 GDI: The cutter is binding."
0041 0007_E 2820100 2820100 000PR01:38:60:00 "TH21 GDI: Error in memory test (RAM and ROM)"
0041 0008_E 2820100 2820100 000PR01:38:60:00 "TH21 GDI: Unexpected data was received."
0041 0009_E 2820100 2820100 000PR01:38:60:00 "TH21 GDI: A WRITE command could not be executed in the specified
monitoring time"
0041 000A_E 2820100 2820100 000PR01:38:60:00 "TH21 GDI: A READ command could not be executed in the specified
monitoring time"
0041 000B_E 2820100 2820100 000PR01:38:60:00 "TH21 GDI: Further control commands missing (e.g. Eject)"
0041 000C_E 2820100 2820100 000PR01:38:60:00 "TH21 GDI: An error occurred while the required line parameters were being
set."

Printer System Framework (Class: 0042)

The following table lists the MDS Status codes assigned to printer class 0042.

Table 81: Printer (Class: 0042)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0042 DEFA_W 2820100 2820100 000PR01:38:60:00 "PRT GDI: Default warning if no CSC-W32 error found"
0042 DEFA_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Default error if no CSC-W32 error found"
0042 0001_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Data that are passed to print system are to small"
0042 0002_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Invalid registry parameter"
0042 0003_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Operation not valid or not supported by printer"
0042 0004_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Internal software error"
0042 0005_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Function not allowed in the current context"
0042 0006_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Communication error, write request unsuccessful"
0042 0007_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: A system error has occurred"
0042 0008_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Unexpected parameter in system call"
0042 0009_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Open failed"
0042 000A_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Start of a print job failed"
0042 000B_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: A job has been despooled while another job is still in
progress"
0042 000D_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Invalid parameter used in a server function call"

May 2011 283

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
0042 000E_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Client already registered for monitoring"
0042 000F_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: The client tried to claim the device twice"
0042 0010_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Invalid client handle used"
0042 0011_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Client not registered for monitoring"
0042 0012_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Start of print system server failed"
0042 0013_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Connection failed, the printer is unknown"
0042 0014_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Access denied, the client is not allowed to access the
requested operation"
0042 0015_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Access denied, because another client has claimed the
device for exclusive access"
0042 0016_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: Unknown property"
0042 0017_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: The property has an invalid format"
0042 0018_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: The property value is invalid"
0042 0019_E 2820100 2820100 000PR01:38:60:00 "PRT GDI: An invalid input string has been supplied"

Printer TP07 GDI (Class: 0044)

The following table lists the MDS Status codes assigned to printer class 0044.

Table 82: Printer (Class: 0044)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0044 DEFA_W 2820100 2820100 000PR01:38:60:00 "TP07 GDI: DEFAULT_WARNING"
0044 DEFA_E 2820100 2820100 000PR01:38:60:00 "TP07 GDI: DEFAULT_ERROR"
0044 0001_E 2820100 2820100 000PR01:3F:41:39 "TP07 GDI: Paper-out condition"
0044 0002_E 2822100 2822100 000PR01:3D:60:00 "TP07 GDI: Paper jam while cutting the paper"
0044 0003_E 2820800 2820800 000PR01:3E:42:48 "TP07 GDI: Black dot mark not found"
0044 0004_E 2020100 2020100 000PR01:39:44:00 "TP07 GDI: Paper jam after cut receipt in the presenter"
0044 0005_E 2020100 2020100 000PR01:39:44:00 "TP07 GDI: Paper jam after cut receipt after reject command."
0044 0006_E 2020100 2020100 000PR01:39:44:00 "TP07 GDI: Receipt paper jam while printing process"
0044 0007_E 2820100 2820100 000PR01:38:60:00 "TP07 GDI: Internal print job timeout has occurred"
0044 0008_E 2820100 2820100 000PR01:38:60:00 "TP07 GDI: Power voltage of the printer is too high"
0044 0009_E 2820100 2820100 000PR01:38:60:00 "TP07 GDI: Power voltage of the printer is too low"
0044 000A_E 2820100 2820100 000PR01:38:60:00 "TP07 GDI: Temperature of the print head is too high"
0044 000B_E 2820100 2820100 000PR01:38:60:00 "TP07 GDI: Hardware error"
0044 0010_E 2820100 2820100 000PR01:38:60:00 "TP07 GDI: Unexpected data was received"
0044 0011_E 2820100 2820100 000PR01:38:60:00 "TP07 GDI: A WRITE command could not be executed in the specified
monitoring time"
0044 0012_E 2820100 2820100 000PR01:38:60:00 "TP07 GDI: A READ command could not be executed in the specified
monitoring time"
0044 0013_E 2820100 2820100 000PR01:38:60:00 "TP07 GDI: This message may only occur when controlled print jobs are
received"
0044 0015_E 2820100 2820100 000PR01:38:60:00 "TP07 GDI: An internal SW error occurred"
0044 0016_E 2820100 2820100 000PR01:38:60:00 "TP07 GDI: Printer is in offline state without any specific device error"

284 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Printer TP07 (Class: 0045)

The following table lists the MDS Status codes assigned to printer class 0045.

Table 83: Printer (Class: 0045)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0045 DEFA_W 2820100 2820100 000PR01:38:60:00 "RJ03/TP07/NP07: DEFAULT_WARNING"
0045 DEFA_E 2820100 2820100 000PR01:38:60:00 "RJ03/TP07/NP07: DEFAULT_ERROR"
0045 0001_E 2828000 2828000 000PR01:2D:50:00 "RJ03/TP07/NP07: Receipt paper low"
0045 8100_E 2820100 2820100 000PR01:38:60:00 "RJ03/TP07/NP07: Unexpected data was received"
0045 8101_E 2820100 2820100 000PR01:38:60:00 "RJ03/TP07/NP07: Allocation error, not enough resources to allocate
internal memory"
0045 8102_E 2820100 2820100 000PR01:38:60:00 "RJ03/TP07/NP07: A READ command could not be executed in the
specified monitoring time"
0045 8103_E 2820100 2820100 000PR01:38:60:00 "RJ03/TP07/NP07: Code page not available"
0045 8104_E 2820100 2820100 000PR01:38:60:00 "RJ03/TP07/NP07: Cannot open image file or invalid file name give up"
0045 8105_E 2820100 2820100 000PR01:38:60:00 "RJ03/TP07/NP07: Cannot read the file to be loaded"
0045 8106_E 2820100 2820100 000PR01:38:60:00 "RJ03/TP07/NP07: Invalid logo type"
0045 8107_E 2820100 2820100 000PR01:38:60:00 "RJ03/TP07/NP07: Printer is in offline state without any specific device
error"
0045 8108_E 2820100 2820100 000PR01:38:60:00 "RJ03/TP07/NP07: No USB devices of the specified type available"
0045 8000_E 2822000 2822000 000PR01:3D:60:00 "RJ03/TP07/NP07: Paper-out condition"
0045 8001_E 2822000 2822000 000PR01:3D:60:00 "RJ03/TP07/NP07: Paper jam while paper cut"
0045 8002_E 2820100 2820100 000PR01:38:60:00 "RJ03/TP07/NP07: Carrier does not found the home position"
0045 8003_E 2820100 2820100 000PR01:38:60:00 "RJ03/TP07/NP07: Paper jam before cut"
0045 8004_E 2820800 2820800 000PR01:38:60:00 "RJ03/TP07/NP07: Black dot mark not found"
0045 8005_E 2820100 2820100 000PR01:38:60:00 "RJ03/TP07/NP07: Paper jam after cutting the receipt in the presenter"
0045 8006_E 2820100 2820100 000PR01:38:60:00 "RJ03/TP07/NP07: Paper jam after cut receipt after reject command"
0045 8007_E 2820100 2820100 000PR01:38:60:00 "RJ03/TP07/NP07: Receipt paper jam while printing"
0045 8008_E 2820100 2820100 000PR01:38:60:00 "RJ03/TP07/NP07: Power voltage of printer is too high"
0045 8009_E 2820100 2820100 000PR01:38:60:00 "RJ03/TP07/NP07: Power voltage of printer is too low"
0045 800A_E 2820100 2820100 000PR01:38:60:00 "RJ03/TP07/NP07: Temperature of print head is too high"
0045 800B_E 2820100 2820100 000PR01:38:60:00 "RJ03/TP07/NP07: Hardware error"
0045 800C_E 2820100 2820100 000PR01:38:60:00 "RJ03/TP07/NP07: Paper is not at print starting position"

May 2011 285

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Printer USB/TP07 (Class: AA45)

The following table lists the MDS Status codes assigned to printer class AA45.
This error is an internal generated error derived from the original CSC-W32
error class 0003.

Refer to section ”Error Class Mapping” on page 5.

Table 84: Printer (Class: AA45)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
AA45 DEFA_W 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: DEFAULT_WARNING"
AA45 DEFA_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: DEFAULT_ERROR"
AA45 8000_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Unexpected descriptor was reported from USB
device"
AA45 8001_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Device not found"
AA45 8002_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Not enough memory available"
AA45 8003_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: It was no endpoint found in the descriptor"
AA45 8004_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: The creation of the list of USB devices failed"
AA45 FE09_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: USB read command could not be executed in the
specified monitoring time"
AA45 FE0A_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: USB READ command is cancelled by the user"
AA45 FE89_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: The pointer pData is illegal"
AA45 FE9C_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: The length in DataSize is 0 (zero)"
AA45 0001_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: CRC error has been detected"
AA45 0002_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Bit stuffing error has been detected"
AA45 0003_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: DATA toggle mismatch has been detected"
AA45 0004_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: STALLPID has been detected, error is reported by the
USB host controller"
AA45 0005_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: USB device is not responding, error is reported by the
USB host"
AA45 0006_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: PID check has failed, error is reported by the USB host
controller"
AA45 0007_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Unexpected PID detected, error is reported by the
USB host"
AA45 0008_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Data overrun error detected, error is reported by the
USB host"
AA45 0009_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Data underrun error detected, error is reported by the
USB host"
AA45 000A_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Error code is reserved by the USB host controller
driver"
AA45 000B_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Error code is reserved by the USB host controller
driver"
AA45 000C_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Buffer overrun has been detected, error is reported by
the USB host"
AA45 000D_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Buffer underrun has been detected, error is reported
by the USB host"
AA45 000F_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Buffer was not accessed, error is reported by the USB
host"
AA45 0010_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: FIFO error has been detected, PCI bus latency was
too long"
AA45 0011_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: XACT error has been detected, error is reported by the
USB host"
AA45 0012_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Device is babbling, data transfer phase exceeds the
USB frame length"
AA45 0013_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Data buffer error has been detected, error is reported
by the USB host"
AA45 0030_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Endpoint has been halted by the USB bus driver
USBD"

286 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
AA45 0100_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Memory allocation attempt has failed, error is reported
by the USB bus"
AA45 0200_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Invalid URB function code has been passed, error is
reported by the USB"
AA45 0300_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Invalid parameter has been passed, error is reported
by the USB bus"
AA45 0400_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: There are data transfer requests pending for the
device"
AA45 0500_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Request has failed, error is reported by the USB bus
driver USBD"
AA45 0600_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Invalid pipe handle has been passed, error is reported
by the USB bus"
AA45 0700_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: There is not enough bandwidth available, error is
reported by the USB bus"
AA45 0800_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Internal host controller error has been detected"
AA45 0900_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Short transfer has been detected, error is reported by
the USB bus"
AA45 0A00_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Bad start frame has been specified, error is reported
by the USB bus"
AA45 0B00_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Asynchronous request has failed, error is reported by
the USB bus driver"
AA45 0C00_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: USB frame control is currently owned, error is reported
by the USB bus"
AA45 0D00_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: USB frame control is currently not owned, error is
reported by the USB"
AA45 0E00_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Operation is not supported, error is reported by the
USB bus driver"
AA45 0F00_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Invalid configuration descriptor was reported by the
device"
AA45 1000_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Operation has failed, error is reported by the USBIO
driver"
AA45 1001_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Invalid input buffer has been passed to an IOCTL
operation"
AA45 1002_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Invalid output buffer has been passed to an IOCTL
operation"
AA45 1003_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: There is not enough system memory available to
complete the operation"
AA45 1004_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: There are read or write requests pending, error is
reported by the USBIO"
AA45 1005_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: USB device is already configured, error is reported by
the USBIO"
AA45 1006_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: The USB device is not configured, error is reported by
the USBIO driver"
AA45 1007_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: There are open pipes, error is reported by the USBIO
driver"
AA45 1008_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Either the handle is already bound to a pipe"
AA45 1009_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Handle is not bound to a pipe, error is reported by the
USBIO driver"
AA45 100A_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: USB device has been removed from the system"
AA45 100B_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Specified control code is not supported"
AA45 100C_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Operation has been timed out, error is reported by the
USBIO driver"
AA45 100D_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Invalid recipient has been specified"
AA45 100E_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Either an invalid request type has been specified"
AA45 100F_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Invalid IOCTL code has been specified, error is
reported by the USBIO"
AA45 1010_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Direction of the data transfer request is not supported
by that pipe"
AA45 1011_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Number of asynchronous data packets specified in an
asynchronous read"
AA45 1012_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Memory resources are exhausted. This error is
reported by the USBIO driver"
AA45 1013_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: The specified pipe was not found in the current config-
uration"
AA45 1014_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: An invalid asynchronous data packet has been
specified"
AA45 1015_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: There are not enough system resources to complete
the operation"

May 2011 287

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
AA45 1016_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Specified interface was not found in the current config-
uration"
AA45 1017_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Operation cannot be executed while the USB device
is in the current state"
AA45 1018_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Invalid parameter has been specified with an IOCTL
operation"
AA45 1019_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Evaluation interval of the USBIO DEMO version has
expired"
AA45 101A_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Invalid power state has been specified"
AA45 101B_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Device has entered a power down state"
AA45 101C_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: API version reported by the USBIO driver does not
match"
AA45 101D_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Set configuration operation has failed, error is
reported by the USBIO"
AA45 1080_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA45 1081_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA45 1082_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA45 1083_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA45 1084_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA45 1085_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA45 1086_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: The operation has failed due to a restriction of the
USBIO LIGHT version"
AA45 1087_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA45 1100_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: The specified device object does not exist"
AA45 1102_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Device object was opened, there is no valid handle to
execute the operation"
AA45 1104_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Enumeration of the specified devices has failed"
AA45 1105_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Invalid parameter has been passed to a function"
AA45 1106_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Library setupapi.dll could not be loaded"
AA45 2000_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Set configuration request has failed"
AA45 3000_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Buffer is too small, error is reported by the USB bus
driver USBD"
AA45 4000_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Interface was not found, error is reported by the USB
bus driver USBD"
AA45 5000_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Invalid pipe flags have been specified"
AA45 6000_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: Operation has been timed out, error is reported by the
USB bus driver"
AA45 7000_E 2820100 2820100 000PR01:38:60:00 "USB/TP07/NP07: USB device is gone, error is reported by the USB bus
driver USBD"

Printer TP06 (Class: 0048)

The following table lists the MDS Status codes assigned to printer class 0048.

Table 85: Printer (Class: 0048)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0048 DEFA_W 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: DEFAULT_WARNING"
0048 DEFA_E 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: DEFAULT_ERROR"
0048 0001_E 2810020 2810020 000PR02:2D:50:00 "RJ03/TP06/NP06: Journal paper low"
0048 8100_E 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: Unexpected data was received"
0048 8101_E 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: Allocation error, not enough resources to allocate
internal memory"
0048 8102_E 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: A READ command could not be executed in the
specified monitoring time"

288 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
0048 8103_E 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: Code page not available"
0048 8104_E 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: Cannot open image file or invalid file name give up"
0048 8105_E 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: Cannot read the file to be loaded"
0048 8106_E 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: Invalid logo type"
0048 8107_E 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: Printer is in offline state without any specific device
error"
0048 8108_E 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: No USB devices of the specified type available"
0048 8000_E 2810081 2810081 000PR02:3D:60:00 "RJ03/TP06/NP06: Journal paper out"
0048 8001_E 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: Paper jam while paper cut"
0048 8002_E 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: Carrier does not found the home position"
0048 8003_E 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: Paper jam before cut"
0048 8004_E 2810008 2810008 000PR02:38:60:00 "RJ03/TP06/NP06: Black dot mark not found"
0048 8005_E 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: Paper jam after cutting the receipt in the presenter"
0048 8006_E 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: Paper jam after cut receipt after reject command"
0048 8007_E 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: Receipt paper jam while printing"
0048 8008_E 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: Power voltage of printer is too high"
0048 8009_E 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: Power voltage of printer is too low"
0048 800A_E 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: Temperature of print head is too high"
0048 800B_E 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: Hardware error"
0048 800C_E 2810001 2810001 000PR02:38:60:00 "RJ03/TP06/NP06: Paper is not at print starting position"

Printer USB/TP06 (Class: AA48)

The following table lists the MDS Status codes assigned to printer class AA48.
This error is an internal generated error derived from the original CSC-W32
error class 0003.

Refer to section ”Error Class Mapping” on page 5.

Table 86: Printer (Class: AA48)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
AA48 DEFA_W 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: DEFAULT_WARNING"
AA48 DEFA_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: DEFAULT_ERROR"
AA48 8000_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Unexpected descriptor was reported from USB
device"
AA48 8001_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Device not found"
AA48 8002_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Not enough memory available"
AA48 8003_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: It was no endpoint found in the descriptor"
AA48 8004_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: The creation of the list of USB devices failed"
AA48 FE08_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: USB write command could not be executed in the
specified monitoring time"
AA48 FE09_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: USB read command could not be executed in the
specified monitoring time"
AA48 FE0A_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: USB READ command is cancelled by the user"
AA48 FE89_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: The pointer pData is illegal"
AA48 FE9C_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: The length in DataSize is 0 (zero)"
AA48 0001_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: CRC error has been detected"
AA48 0002_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Bit stuffing error has been detected"
AA48 0003_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: DATA toggle mismatch has been detected"
AA48 0004_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: STALLPID has been detected, error is reported by the
USB host controller"

May 2011 289

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
AA48 0005_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: USB device is not responding, error is reported by the
USB host"
AA48 0006_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: PID check has failed, error is reported by the USB host
controller"
AA48 0007_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Unexpected PID detected, error is reported by the
USB host"
AA48 0008_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Data overrun error detected, error is reported by the
USB host"
AA48 0009_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Data underrun error detected, error is reported by the
USB host"
AA48 000A_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Error code is reserved by the USB host controller
driver"
AA48 000B_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Error code is reserved by the USB host controller
driver"
AA48 000C_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Buffer overrun has been detected, error is reported by
the USB host"
AA48 000D_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Buffer underrun has been detected, error is reported
by the USB host"
AA48 000F_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Buffer was not accessed, error is reported by the USB
host"
AA48 0010_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: FIFO error has been detected, PCI bus latency was
too long"
AA48 0011_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: XACT error has been detected, error is reported by the
USB host"
AA48 0012_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Device is babbling, data transfer phase exceeds the
USB frame length"
AA48 0013_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Data buffer error has been detected, error is reported
by the USB host"
AA48 0030_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Endpoint has been halted by the USB bus driver
USBD"
AA48 0100_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Memory allocation attempt has failed, error is reported
by the USB bus"
AA48 0200_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Invalid URB function code has been passed, error is
reported by the USB"
AA48 0300_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Invalid parameter has been passed, error is reported
by the USB bus"
AA48 0400_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: There are data transfer requests pending for the
device"
AA48 0500_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Request has failed, error is reported by the USB bus
driver USBD"
AA48 0600_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Invalid pipe handle has been passed, error is reported
by the USB bus"
AA48 0700_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: There is not enough bandwidth available, error is
reported by the USB bus"
AA48 0800_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Internal host controller error has been detected"
AA48 0900_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Short transfer has been detected, error is reported by
the USB bus"
AA48 0A00_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Bad start frame has been specified, error is reported
by the USB bus"
AA48 0B00_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Asynchronous request has failed, error is reported by
the USB bus driver"
AA48 0C00_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: USB frame control is currently owned, error is reported
by the USB bus"
AA48 0D00_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: USB frame control is currently not owned, error is
reported by the USB"
AA48 0E00_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Operation is not supported, error is reported by the
USB bus driver"
AA48 0F00_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Invalid configuration descriptor was reported by the
device"
AA48 1000_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Operation has failed, error is reported by the USBIO
driver"
AA48 1001_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Invalid input buffer has been passed to an IOCTL
operation"
AA48 1002_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Invalid output buffer has been passed to an IOCTL
operation"
AA48 1003_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: There is not enough system memory available to
complete the operation"
AA48 1004_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: There are read or write requests pending, error is
reported by the USBIO"

290 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
AA48 1005_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: USB device is already configured, error is reported by
the USBIO"
AA48 1006_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: The USB device is not configured, error is reported by
the USBIO driver"
AA48 1007_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: There are open pipes, error is reported by the USBIO
driver"
AA48 1008_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Either the handle is already bound to a pipe"
AA48 1009_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Handle is not bound to a pipe, error is reported by the
USBIO driver"
AA48 100A_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: USB device has been removed from the system"
AA48 100B_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Specified control code is not supported"
AA48 100C_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Operation has been timed out, error is reported by the
USBIO driver"
AA48 100D_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Invalid recipient has been specified"
AA48 100E_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Either an invalid request type has been specified"
AA48 100F_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Invalid IOCTL code has been specified, error is
reported by the USBIO"
AA48 1010_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Direction of the data transfer request is not supported
by that pipe"
AA48 1011_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Number of asynchronous data packets specified in an
asynchronous read"
AA48 1012_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Memory resources are exhausted. This error is
reported by the USBIO driver"
AA48 1013_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: The specified pipe was not found in the current config-
uration"
AA48 1014_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: An invalid asynchronous data packet has been
specified"
AA48 1015_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: There are not enough system resources to complete
the operation"
AA48 1016_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Specified interface was not found in the current config-
uration"
AA48 1017_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Operation cannot be executed while the USB device
is in the current state"
AA48 1018_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Invalid parameter has been specified with an IOCTL
operation"
AA48 1019_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Evaluation interval of the USBIO DEMO version has
expired"
AA48 101A_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Invalid power state has been specified"
AA48 101B_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Device has entered a power down state"
AA48 101C_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: API version reported by the USBIO driver does not
match"
AA48 101D_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Set configuration operation has failed, error is
reported by the USBIO"
AA48 1080_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA48 1081_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA48 1082_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA48 1083_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA48 1084_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA48 1085_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA48 1086_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: The operation has failed due to a restriction of the
USBIO LIGHT version"
AA48 1087_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Operation has failed due to a restriction of the USBIO
LIGHT version"
AA48 1100_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: The specified device object does not exist"
AA48 1102_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Device object was opened, there is no valid handle to
execute the operation"
AA48 1104_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Enumeration of the specified devices has failed"
AA48 1105_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Invalid parameter has been passed to a function"
AA48 1106_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Library setupapi.dll could not be loaded"
AA48 2000_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Set configuration request has failed"
AA48 3000_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Buffer is too small, error is reported by the USB bus
driver USBD"

May 2011 291

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
AA48 4000_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Interface was not found, error is reported by the USB
bus driver USBD"
AA48 5000_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Invalid pipe flags have been specified"
AA48 6000_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: Operation has been timed out, error is reported by the
USB bus driver"
AA48 7000_E 2810001 2810001 000PR02:38:60:00 "USB/TP06/NP06: USB device is gone, error is reported by the USB bus
driver USBD"

Printer TP13 (Class: 004A/004B)

The following table lists the MDS Status codes assigned to printer class 004A
and 004B.

Table 87: Printer (Class: 004A)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
004A DEFA_W 2820100 2820100 000PR01:38:60:00 "TP13 GDI: DEFAULT_WARNING"
004A DEFA_E 2820100 2820100 000PR01:38:60:00 "TP13 GDI: DEFAULT_ERROR"
004A 0001_E 2820100 2820100 000PR01:3F:41:39 "TP13 GDI: Paper-out condition or paper not loaded."
004A 0002_E 2822100 2822100 000PR01:3D:60:00 "TP13 GDI: Cutter error occurred."
004A 0003_E 2820800 2820800 000PR01:3E:42:48 "TP13 GDI: By activated mark, recognition a mark is not found."
004A 0004_E 2822100 2822100 000PR01:3D:60:00 "TP13 GDI: Paper jam after the cutting of a receipt in the presenter"
004A 0005_E 2020100 2020100 000PR01:39:44:00 "TP13 GDI: There was a paper jam."
004A 0006_E 2820100 2820100 000PR01:38:60:00 "TP13 GDI: The temperature of the print head is too high."
004A 0007_E 2820100 2820100 000PR01:38:60:00 "TP13 GDI: Cutter/printing unit is open or not locked."
004A 0009_E 2820100 2820100 000PR01:38:60:00 "TP13 GDI: Unexpected data was received."
004A 000A_E 2820100 2820100 000PR01:38:60:00 "TP13 GDI: A WRITE command could not be executed in the specified
monitoring time."
004A 000B_E 2820100 2820100 000PR01:38:60:00 "TP13 GDI: A READ command could not be executed in the specified
monitoring time."
004A 000C_E 2820100 2820100 000PR01:38:60:00 "TP13 GDI: The printer was not found or the printer was removed from
the system"
004A 000D_E 2820100 2820100 000PR01:38:60:00 "TP13 GDI: A READ command could not be executed."
004A 000E_E 2820100 2820100 000PR01:38:60:00 "TP13 GDI: There was a communication error during a data transfer to the
printer"
004A 000F_E 2820100 2820100 000PR01:38:60:00 "TP13 GDI: Detection of an unknown error code."
004A 0010_E 2820100 2820100 000PR01:38:60:00 "TP13 GDI: A printed receipt doesn't reach presenter outlet within 10
seconds."

Table 88: Printer (Class: 004B)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
004B DEFA_W 2820100 2820100 000PR01:38:60:00 "LDTP13 GDI: DEFAULT_WARNING"
004B DEFA_E 2820100 2820100 000PR01:38:60:00 "LDTP13 GDI: DEFAULT_ERROR"
004B 8000_E 2820100 2820100 000PR01:38:60:00 "LDTP13 GDI: Cannot open firmware file."
004B 8001_E 2820100 2820100 000PR01:38:60:00 "LDTP13 GDI: Cannot read the firmware file to be loaded."
004B 8002_E 2820100 2820100 000PR01:38:60:00 "LDTP13 GDI: Cannot read the file to be loaded."
004B 8003_E 2820100 2820100 000PR01:38:60:00 "LDTP13 GDI: The expected response of the Firmware Loader is not
correct."
004B 8004_E 2820100 2820100 000PR01:38:60:00 "LDTP13 GDI: Firmware file data do not reach the firmware controller
correctly."
004B 8005_E 2820100 2820100 000PR01:38:60:00 "LDTP13 GDI: An error occurred when the print system was started from
the CSC service."
004B 8023_E 2820100 2820100 000PR01:38:60:00 "LDTP13 GDI: There was a communication error during a data transfer to
the printer"
004B 8025_E 2820100 2820100 000PR01:38:60:00 "LDTP13 GDI: The printer did not respond to a request during a given
time frame."

292 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
004B 0001_E 2820100 2820100 000PR01:38:60:00 "LDTP13 GDI: The value of the registry entry "FILE_CTR" cross the
maximum value of loadable firmware files"
004B 0002_E 2820100 2820100 000PR01:38:60:00 "LDTP13 GDI: No entry "FILE1" found in the registry."

May 2011 293

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Reiner Scanner (Class: 0051)

The following table lists the MDS Status codes assigned to Reiner Scanner
class 0051.

Table 89: Reiner Scanner (Class: 0051)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0051 DEFA_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Default error"
0051 DEFA_W q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Default warning"
0051 8000_W q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Invalid parameter"
0051 8001_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: No document inserted"
0051 8002_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Function CscPrtRead was calls, but no MICR mode via
CscPrtControl selected"
0051 8006_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Cannot open raw file (R89X.RAW)"
0051 8007_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Error writing raw file (R89X.RAW)"
0051 8008_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: The internal shutter could not be opened"
0051 8009_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: The internal shutter could not be closed"
0051 8100_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: The initialization of the scanner failed"
0051 8110_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: There is still a document in the scanner"
0051 8200_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: The firmware file(s) is/are invalid."
0051 8201_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Error while loading the firmware file(s)"
0051 9001_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Feeder failed to start document"
0051 9002_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: A document is stuck or lost in track"
0051 9003_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: The document feeder is empty"
0051 9004_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: The scanner housing is open"
0051 9005_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: The document ist out of the format range"
0051 9006_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Double feed"
0051 9007_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: A document is still in track"
0051 9008_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Document is not inside the left photosensor, in front of the
shutter"
0051 9009_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Rejext box full, empty reject box"
0051 900A_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: The reject box is open or not correctly connected"
0051 900E_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Error message because the scanner has been switched
off"
0051 9010_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Timeout while data transfer to the PC (images, MICR)"
0051 9080_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error. Device not installed"
0051 9081_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error. Device is in use"
0051 9082_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error. Device is in a unknown state"
0051 9083_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error. Windows version does not allow USB"
0051 9084_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error. Wrong Scanner interface type"
0051 9085_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error. Can not create mutex"
0051 9086_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error. Scanner not initialized"
0051 9087_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error. Unit not available"
0051 9088_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error. Front side camera not available"
0051 9089_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error. Rear side camera not available"
0051 908A_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error. MICR reader not available"
0051 908B_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error. Front side endorsement not available"
0051 908C_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error. Rear side endorsement not available"
0051 908D_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error. Stamp not available"
0051 908E_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error. Orientation (mechanical alignment) not
available"
0051 908F_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error. Object for this Unit is not available"
0051 9090_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error. Value not plausible"
0051 9091_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error. No jobs defined"
0051 9092_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error. USB don't receive all bytes from front side
image"
0051 9093_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error. USB don't receive all bytes from back side
image"
0051 90FF_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: R89XAPI.DLL returned undefined error"
0051 9201_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Illegal arguments calling IMACON.DLL"
0051 9202_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Cannot open input file"

294 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
0051 9203_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Error reading input"
0051 9204_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Cannot open output file"
0051 9205_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Error writing output file"
0051 9206_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Not enough memory"
0051 9207_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Image too long"
0051 9208_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Image too large (for TIF)"
0051 9209_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Image too small (<1 row)"
0051 92FF_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: IMACON.DLL returned undefined error"
0051 9300_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error while calling DQF.DLL"
0051 9301_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error while calling DQF.DLL"
0051 9302_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error while calling DQF.DLL"
0051 9303_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error while calling DQF.DLL"
0051 9304_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error while calling DQF.DLL"
0051 9305_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: Internal error while calling DQF.DLL"
0051 93FF_E q010000 q010000 000CQ01:3F:00:01 "REINER_CHQ: DQF.DLL returned undefined error"

May 2011 295

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Printer TP12 (Class: 0052)

The following table lists the MDS Status codes assigned to printer class 0052.

Table 90: Printer (Class: 0052)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0052 DEFA_E 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: Default error"
0052 DEFA_W 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: Default warning"
0052 0000_W 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: Hardware warning"
0052 0000_E 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: Hardware error"
0052 0001_E 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: Paper out condition"
0052 0002_E 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: The cover is open"
0052 0003_E 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: Paper jam, not possible to print"
0052 0004_E 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: Paper jam after cutting the receipt"
0052 0005_E 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: Paper jam, check paper feed"
0052 0006_E 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: Jam, cutter motor faulty"
0052 0007_E 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: RAM error, check memory"
0052 0008_E 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: The power voltage of the printer is not ok"
0052 0009_E 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: The temperature of the print head is too high"
0052 000A_E 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: Cutter, printing unit is open or not locked."
0052 000B_E 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: Control command missing"
0052 000C_E 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: An error occurred while the required line parameters
were being set"
0052 000D_E 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: Cutter error occurred"
0052 000E_E 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: Offered document transported to the retract box after a
time-out"
0052 000F_E 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: A print job is to be executed although the print function-
ality has not been activated"
0052 0010_E 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: Message, if the adjusted limit for the retract box is
exceeded"
0052 0017_E 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: Communication error during data transfer"
0052 0019_E 2820100 2820100 000PR01:38:60:00 "PRT GDI/TP12: Printer did not respond to a request during a given time
frame"

296 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Single Note Acceptor (SNA/JCM/WBA) (Class: 0059)

The following table lists the MDS Status codes assigned to the Single Note
Acceptor or Japanese Cash Machine (JCM) class 0059.

Table 91: Single Note Acceptor (SNA) (class: 0059)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0059 8000_E A400000 :4000 000DP01:38:00:00 "SNA_CIN: The acceptor did not respond as expected to a command sent
by the device handler"
0059 8001_E A400000 :4000 000DP01:38:00:00 "SNA_CIN: The cashbox is full"
0059 8002_E A400000 :4000 000DP01:38:00:00 "SNA_CIN: The cashbox is either removed or not completely installed (not
snapped in)"
0059 8003_E A400000 :4000 000DP01:38:00:00 "SNA_CIN: A bill is jammed inside the acceptor head"
0059 8004_E A400000 :4000 000DP01:38:00:00 "SNA_CIN: A bill jam has occurred in the transport section of the acceptor"
0059 8005_E A400000 :4000 000DP01:38:00:00 "SNA_CIN: The acceptor has stopped because a second bill has been
inserted"
0059 8006_E A400000 :4000 000DP01:38:00:00 "SNA_CIN: The acceptor has detected an action thought to be mischievous"
0059 8007_E A400000 :4000 000DP01:38:00:00 "SNA_CIN: Normal acceptor operation cannot continue due to a failure"
0059 8008_E A400000 :4000 000DP01:38:00:00 "SNA_CIN: An error has developed in the communication data"
0059 8009_E A400000 :4000 000DP01:38:00:00 "SNA_CIN: Command from the controller is not valid"
0059 80A2_E A400000 :4000 000DP01:38:00:00 "SNA_CIN: Stack motor failure"
0059 80A5_E A400000 :4000 000DP01:38:00:00 "SNA_CIN: Transport (feed) motor speed failure"
0059 80A6_E A400000 :4000 000DP01:38:00:00 "SNA_CIN: Transport (feed) motor failure"
0059 80AB_E A400000 :4000 000DP01:38:00:00 "SNA_CIN: Cashbox not ready"
0059 80AF_E A400000 :4000 000DP01:38:00:00 "SNA_CIN: Validator head is removed or wrong type is installed"
0059 80B0_E A400000 :4000 000DP01:38:00:00 "SNA_CIN: Boot ROM failure"
0059 80B1_E A400000 :4000 000DP01:38:00:00 "SNA_CIN: External ROM failure"
0059 80B2_E A400000 :4000 000DP01:38:00:00 "SNA_CIN: ROM failure"
0059 80B3_E A400000 :4000 000DP01:38:00:00 "SNA_CIN: External ROM writing failure"
0059 FE95_E A400000 :4000 000DP01:38:00:00 "SNA_CIN: The total protocol monitoring time during transmission has been
exceeded"
0059 FE96_E A400000 :4000 000DP01:38:00:00 "SNA_CIN: The total protocol monitoring time during reception has been
exceeded"

May 2011 297

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

Euro Banknote Handler (EBH/RM2) (Class: 005A)

The following table lists the MDS Status codes assigned to the Euro Bank Note
Handler class 005A.

Table 92: Euro Bank Note Handler (class: 005A)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
005A DEFA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: DEFAULT_ERROR"
0000000
005A DEFA_W ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: DEFAULT_WARNING"
0000000
005A 0001_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: 2nd byte of (CNTL) of command is undefined."
0000000
005A 0002_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: 0 or more than 100 in (Total) of (Stacking Limit Number of
0000000 Notes) or 0 after calculation of (Media 16)."
005A 0004_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Number of notes is over total number of stackable notes."
0000000
005A 0005_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Requested counts of bills was 0 or greater than 109."
0000000
005A 0006_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Define note configuration command, (LNG) of "Note config-
0000000 uration" is not correct."
005A 0007_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Define destination of deposit command, (LNG) of "Desti-
0000000 nation information" is not correct."
005A 0008_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Define destination of dispense command, (LNG) of "Desti-
0000000 nation information" is not correct."
005A 0009_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Define deposit function command, (LNG) of "Deposit
0000000 Function" is not correct."
005A 000A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Returning or storing is received when any note is not stacked
0000000 in temporary stack unit."
005A 000C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Define storing function command, (LNG) of "Storing
0000000 Function" is not correct."
005A 000D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: (LNG) of "Transaction Number" is not correct."
0000000
005A 000E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Define destinatin of deposit command, "Distination infor-
0000000 mation" is not correct."
005A 000F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Fix recognition result of BIM command, (LNG) of "Fix Data"
0000000 is not correct."
005A 0010_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Fix recognition result of BIM command, (Number) of "Fix
0000000 Data" was 0 or greater than 128."
005A 0011_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Fix recognition result of BIM command, (Category) of "Fix
0000000 Data" was 0 or greater than 4."
005A 0012_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Storing is received when cassettes are full or storable media is
0000000 not set for cassette."
005A 0013_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Dispense is received when rejection unit is full."
0000000
005A 0014_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Collecting is received when cassettes are full or storable media
0000000 is not set for cassette."
005A 0015_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Define destination of deposit command, ""Distination infor-
0000000 mation" is not possible to transport it."
005A 0017_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PDL transmitting command is received before PDL start
0000000 command reception of BID or a cassette control part."
005A 0019_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PDL command is received, when PDL function for tray
0000000 controller is not enabled."
005A 001A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Command data error. When the storing cassette was full, there
0000000 is no destination of the unfit note."
005A 001B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Command data error. When the storing cassette was full, there
0000000 is no destination of the L3 note."
005A 001C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Command receiving timing abnormal. L2-Box is full."
0000000
005A 001D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Command receiving timing abnormal. Reject cassette is full
0000000 before deposit."
005A 001E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Command receiving timing abnormal. Transported cassette not
0000000 installed before deposit."
005A 0020_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Command excluding PDL command is received, when PID
0000000 processing for BID or tray controller is executed."

298 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A 0021_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Dispense is received, when the specified denomination lane is
0000000 suppressed."
005A 0022_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Dispense is received, when the specified denomination lane is
0000000 empty."
005A 002B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Dispense is received, when the specified denomination lane is
0000000 not set."
005A 002C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Dispense is received, when the denomination of the specified
0000000 lane is not set or the cassette is not set."
005A 0032_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Storable cassette is not installed."
0000000
005A 0035_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray is not installed."
0000000
005A 0036_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media is remained in cassette A."
0000000
005A 0037_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media is remained in cassette B."
0000000
005A 0038_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media is remained in cassette C."
0000000
005A 0039_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media is remained in cassette D."
0000000
005A 003A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media is remained in reject cassette."
0000000
005A 003B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media is remained in collection cassette."
0000000
005A 003D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Storable cassette is full."
0000000
005A 0040_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data in (ID) of additional packet is not correct, undefined. Or
0000000 data in (LNG) is not correct."
005A 0046_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Sense of operation detection test or end of operation detection
0000000 test is received without receiving of start of operation detection test."
005A 004A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Destination is not set in (Destination of Read / Write)."
0000000
005A 004B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Destination is not correct in (Destination of Read / Write)."
0000000
005A 004C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data is not set in (Data for Cassette ID)."
0000000
005A 004D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data is not correct in (Destination Information) in (Data for
0000000 Cassette ID)."
005A 004F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data is not set in (Set Data for Cassette Adjustment) or not
0000000 correct."
005A 0050_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data is not set in (Set Data of Adjustment Value for Upper
0000000 Unit) or not correct."
005A 0051_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data is not correct in (Set Data for Cassette Adjustment)."
0000000
005A 0053_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data is not correct in (Set Data of Adjustment Value for Upper
0000000 Unit)."
005A 0054_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data is not set in (Set Data for Cassette Application) or not
0000000 correct."
005A 0055_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data is not correct in (Set Data for Cassette Application)."
0000000
005A 0063_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Denomination information is not set."
0000000
005A 0064_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Destination information is not set."
0000000
005A 0065_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Destination information is not set."
0000000
005A 0066_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Deposit function is not set."
0000000
005A 0067_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Storing function is not set."
0000000
005A 0068_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Transaction number is not set."
0000000
005A 0069_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Transaction number is not set."
0000000
005A 006A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Transaction number is not set."
0000000
005A 006B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Transaction number is not set."
0000000
005A 006C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Transaction number is not set."
0000000

May 2011 299

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A 006D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Transaction number is not set."
0000000
005A 006E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Transaction number is not set."
0000000
005A 006F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Transaction number is not set."
0000000
005A 0070_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data in (Log ID) ACT is not set or data in (LNG) is not
0000000 correct."
005A 0071_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data in (Stacking Limit Number of Notes) is not set or data in
0000000 (LNG) is not correct."
005A 0073_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: There was no requested number of bills to be dispensed, or the
0000000 data length LNG was incorrect."
005A 0074_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Transaction number is not set."
0000000
005A 0075_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data in (Time) is not set or data in (LNG) is not correct."
0000000
005A 0076_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Transaction number is not set."
0000000
005A 0077_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: BID command is not set."
0000000
005A 0078_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The transportation destinations of level 3 are not united by all
0000000 denominations."
005A 0079_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Fix data is not set."
0000000
005A 007A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Command data of define note configuration abnormal. The
0000000 data length of the packet was specified 258 bytes or more."
005A 007B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Command data of transmission of PDL data abnormal. The
0000000 data length of the packet was specified 994 bytes or more."
005A 007C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Command data of maintenance commands abnormal. The
0000000 packet of the data length in 258 bytes or more was specified."
005A 007D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Command data of set maximum number of retract box
0000000 abnormal. Maximum number is not set."
005A 007E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The specified command data of “Define Storing Function” was
0000000 abnormal."
005A 007F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The specified command data of "Define Skew Threshold" was
0000000 abnormal. The"
005A 0080_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data in (Current Date and Time) is abnormal or data in (LNG)
0000000 is not correct."
005A 0083_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Set data of the number of remaining bills was invalid, or the
0000000 data length LNG was incorrect."
005A 0084_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data in (Set of Abnormal Notes) is abnormal or data in (LNG)
0000000 is not correct."
005A 0086_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data in (Set of Numbers for Full/Near-full) is abnormal or data
0000000 in (LNG) is not correct."
005A 0087_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: BID command data in (LNG) is not correct."
0000000
005A 0088_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Storing media for overflow is not correct."
0000000
005A 0089_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Storing media for cartridge is not correct."
0000000
005A 008C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data in (Module Number) of (Set of Deposit Function) is
0000000 abnormal or data in (LNG) is not correct."
005A 008E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Set denomination for the cassette was invalid, or the data
0000000 length LNG was incorrect."
005A 008F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Duplicated data is set in (Cassette Denomination Setting) or
0000000 data in (LNG) is not correct."
005A 0090_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Length of whole command is not correct."
0000000
005A 0091_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data in (BCW) is not correct."
0000000
005A 0092_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: 1st byte of (CNTL) is undefined."
0000000
005A 0093_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data for (ID) in (CNTL) is not set."
0000000
005A 0094_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data in (LNG) of (CNTL) is not correct."
0000000
005A 0095_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Status sense or unexpected command is received after WDT-
0000000 out."
005A 0096_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Status sense or unexpected command is received after power-
0000000 down during execution."

300 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A 0097_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Status sense or unexpected command is received during
0000000 mechanical down."
005A 0098_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Status sense or unexpected command is received after
0000000 receiving of stop."
005A 0099_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Status sense or unexpected command is received after
0000000 detection of mechanical down."
005A 009A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It is mechanism operation command reception before data
0000000 write command reception."
005A 009D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data in [Kind of Safe Pass] is abnormal or Data in [LNG] is
0000000 not correct."
005A 009E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data in (Priority level of Dispense) is abnormal or data in
0000000 (LNG) is not correct."
005A 00A0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data in (ACT) of feed start command to tray controller is not
0000000 correct."
005A 00A1_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data in (ACT) of storing start command to tray controller is not
0000000 correct."
005A 00A2_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data in (ACT) of reset-conveyance command to tray controller
0000000 is not correct."
005A 00A3_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data in (ACT) of motor speed change command to tray
0000000 controller is not correct."
005A 00B0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Define destination of dispense command "Destination infor-
0000000 mation" is not correct."
005A 00B1_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Define deposit function command "Deposit Function" is not
0000000 correct."
005A 1001_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: I/O module: shutter closed, money in, a note stucks out of the
0000000 bundle."
005A 1002_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: I/O module: shutter cannot be opened."
0000000
005A 1003_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: I/O module: shutter should open but fork light sensor broken."
0000000
005A 1004_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: I/O module: shutter should open but fork light sensor broken."
0000000
005A 1005_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Solenoid (SL14) or switch (SW19) abnormal. There is a possi-
0000000 bility broken."
005A 1006_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Shutter error. Switch (SW17=OFF, SW18=ON) abnormal "
0000000
005A 1007_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Shutter blocked during closing."
0000000
005A 1008_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Shutter blocked during opening."
0000000
005A 1009_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: I/O module: the inner upper tray does not reach the upper end
0000000 position."
005A 100D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: I/O module: shutter closed SW18 wrong."
0000000
005A 100E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: I/O module: shutter closed possible not locked, SW19 wrong."
0000000
005A 100F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: I/O module "
0000000
005A 1010_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: An abnormal rotation of the motor (DM11) was detected when
0000000 the note was dispensed from the outlet."
005A 1011_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: An abnormal rotation of the motor (DM18) was detected when
0000000 the note was dispensed from the outlet."
005A 1012_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: An abnormal rotation of the motor (DM18) was detected when
0000000 the note accumulated to the outlet."
005A 1013_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Dispensing at the outlet is abnormal."
0000000
005A 1014_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Dispensing at the outlet is abnormal."
0000000
005A 1015_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Dispensing at the outlet is abnormal. (The stop interrupt of the
0000000 motor doesn`t enter while the motor is stopping. The motor cannot stop.)"
005A 1016_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Dispensing at the outlet is abnormal (during dispensing jam at
0000000 S2B)."
005A 1017_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Dispensing at the outlet is abnormal (during dispensing jam at
0000000 S2B)."
005A 1031_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
0000000
005A 1032_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit.DM31
0000000 stopped because of detection of SW39 ON."
005A 1033_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit. DM31
0000000 stopped because of detection of SW3A ON."

May 2011 301

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A 1034_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
0000000
005A 1035_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
0000000
005A 1036_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal at temporary stack unit, DM31
0000000 ON, but SW3A not ON."
005A 1037_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
0000000
005A 1038_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit. DM31
0000000 ON, but SW39 not lighted."
005A 1039_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Pressure Mechanism at Escrow Unit is abnormal (DM31 ON,
0000000 but SW3A not lighted)"
005A 103A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
0000000
005A 103B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
0000000
005A 103C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
0000000
005A 103D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: DM32 is tried to rotate for reverse direction at position of
0000000 shelter, but not rotated."
005A 103E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: DM32 is tried to rotate for reverse direction at position of
0000000 dispensing, but not rotated."
005A 103F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: DM32 is tried to rotate for reverse direction after no-
0000000 dispensing, but not rotated."
005A 1049_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: DM40 not stopped at high-speed rotation or low-speed
0000000 rotation."
005A 104A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Speed not arrived to 70% of standard-speed after rotation,
0000000 retries failed."
005A 104B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Speed not arrived to 70% of standard-speed after rotation,
0000000 retries failed."
005A 104C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Speed dropped down at high-speed rotation or low-speed
0000000 rotation."
005A 104D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Speed too fast based on standard-speed at rotation of high-
0000000 speed or low-speed."
005A 104E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Speed too slow based on standard-speed at rotation of high-
0000000 speed or low-speed."
005A 104F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Speed not arrived to 70% of standard-speed after rotation at
0000000 reset transportation, retries failed."
005A 107D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: DM32 is tried to rotate for normal direction, but not rotated -
0000000 DM32 may be locked."
005A 107E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rotation of DM32 can not be checked at normal rotation -
0000000 DM32 may be locked."
005A 107F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: DM32 not stopped by stop indication - DM32 may be locked."
0000000
005A 10A0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Cassette: motor inside cassette A does not turn. It is tried to
0000000 start the motor (DMA2) while conveying."
005A 10A1_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Cassette: motor inside cassette B does not turn. It is tried to
0000000 start the motor (DMB2) while conveying."
005A 10A2_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Cassette: motor inside cassette C does not turn. It is tried to
0000000 start the motor (DMC2) while conveying."
005A 10A3_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Cassette: motor inside cassette D does not turn. It is tried to
0000000 start the motor (DMD2) while conveying."
005A 10AE_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The interrupt of a hard timer did not enter, while cash-out from
0000000 cassette A."
005A 10AF_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It is tried to start the motor (DMA2) while conveying, but it
0000000 didn't run."
005A 10BE_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The interrupt of a hard timer did not enter, while cash-out from
0000000 cassette B."
005A 10BF_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It is tried to start the motor (DMB2) while conveying, but it
0000000 didn't run."
005A 10CE_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The interrupt of a hard timer did not enter, while cash-out from
0000000 cassette C."
005A 10CF_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It is tried to start the motor (DMC2) while conveying, but it
0000000 didn't run."
005A 10DE_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The interrupt of a hard timer did not enter, while cash-out from
0000000 cassette D."
005A 10DF_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It is tried to start the motor (DMD2) while conveying, but it
0000000 didn't run."
005A 10E0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
0000000 generated according to illegal timing of watch timer event."

302 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A 10E1_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
0000000 generated according to illegal timing of SW11 ON or OFF event."
005A 10E2_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
0000000 generated according to illegal timing of SW13 ON or OFF event."
005A 10E3_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
0000000 generated according to illegal timing of SW17 ON or OFF event."
005A 10E4_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
0000000 generated according to illegal timing of SW18 ON or OFF event."
005A 10E5_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
0000000 generated according to illegal timing of SW19 ON or OFF event."
005A 10E7_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
0000000 generated according to illegal timing of SW11 watch time-up event."
005A 10E8_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
0000000 generated according to illegal timing of SW13 watch time-up event."
005A 10EA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
0000000 generated according to illegal timing of low-pressure plate watch time-up event."
005A 10EB_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
0000000 generated according to illegal timing of up-pressure plate watch time-up event."
005A 10EC_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
0000000 generated according to illegal timing of PM12 stop event."
005A 10ED_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled, It is
0000000 generated according to illegal timing of PM19 stop event."
005A 10EE_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: While in the pressure plate in IN/OUT module controlled, it is
0000000 generated according to illegal timing of SW11 and SW13 watch time-up event."
005A 10EF_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: While in the pressure plate in IN/OUT module controlled, it is
0000000 generated according to illegal timing of Feed Moter phase watch time-up event."
005A 10F0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: While in the pressure plate in IN/OUT module controled, after
0000000 PM12 stops, SW11: as turning on."
005A 2010_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: DM11 rotated for normal direction, but S16 and S1A both not
0000000 shielded - No-dispensing detected for five times."
005A 2020_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: DM18 rotated for normal direction, but S2B not shielded - No-
0000000 dispensing detected for five times."
005A 2030_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: DM32 rotated for normal direction, but S33 and S34 both not
0000000 shielded -"
005A 20A0_E ?0B75 8000000000 000DI01:3F:31p37 "CASHOUT RM2: Note jam during dispensing in Cassette A."
0000000
005A 20A2_E ?0B75 8000000000 000DI01:3F:31p37 "CASHOUT RM2: Running out of notes in Cassette A."
0000000
005A 20B0_E ?0B75 8000000000 000DI01:3F:31p37 "CASHOUT RM2: Note jam during dispensing in Cassette B."
0000000
005A 20B2_E ?0B75 8000000000 000DI01:3F:31p37 "CASHOUT RM2: Running out of notes in cassette B."
0000000
005A 20C0_E ?0B75 8000000000 000DI01:3F:31p37 "CASHOUT RM2: Note jam during dispensing in Cassette C."
0000000
005A 20C2_E ?0B75 8000000000 000DI01:3F:31p37 "CASHOUT RM2: Running out of notes in cassette C."
0000000
005A 20D0_E ?0B75 8000000000 000DI01:3F:31p37 "CASHOUT RM2: Note jam during dispensing in Cassette D."
0000000
005A 20D2_E ?0B75 8000000000 000DI01:3F:31p37 "CASHOUT RM2: Running out of notes in cassette D."
0000000
005A 3001_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH down, because length between two notes is too short at
0000000 S51. Two notes run into each other, this could happen during cash-in to ESCROW"
005A 3002_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH down, because length between two notes is too short at
0000000 S52. The notes could be slowed down at ESCROW deflector FL2."
005A 3003_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH down, because length between two Notes is too short at
0000000 S44."
005A 3016_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Sensor shielded more than predefined time Jam at S16 or S1A.
0000000 Jam at dispenser slot lower inner tray of I/O module."
005A 3018_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Sensor shielded more than predefined time Jam at S18."
0000000
005A 301A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S16 / S1A and S18. Jam at dispenser slot lower
0000000 inner tray of I/O module and path R."
005A 3023_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Sensor shielded more than predefined time jam at S23. Jam at
0000000 input slot of BEB reader."
005A 3027_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S44 and S2B. Jam in path F and or centralization
0000000 station."
005A 3028_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Jam between S18 and S23. Jam between path R and BEB
0000000 reader."
005A 302A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S68 and S23. Jam in path R."
0000000

May 2011 303

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A 302B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Sensor shielded more than predefined time. Jam at S2B. Jam
0000000 in I/O module at dispensing slot inner upper tray."
005A 302C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at rear of returning stack unit. Jam between S44 and S23.
0000000 Jam in path F and or centralization station."
005A 302D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S68 and S23. Jam in path R."
0000000
005A 302E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S65/S66/S67 and S2B. Jam in path F, just before
0000000 input slot upper inner tray of I/O module."
005A 302F_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Jam between path unit (F) and BID unit. Jam between S60 and
0000000 S23. Jam in path R between cash-out slot of safe and BEB reader."
005A 3033_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at S33 or S34. Jam inside of the ESCROW."
0000000
005A 303A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at rear of temporary stack unit. Jam between S33/S34 and
0000000 S53. Jam inside of the ESCROW at the dispensing slot."
005A 3044_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at of returning stack unit. Jam at S44. Jam in path F."
0000000
005A 3045_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at S45. Jam in path F."
0000000
005A 3047_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam in path F under the ESCROW. Jam between S52 and S44."
0000000
005A 304A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at rear of Outlet Jam between S45 and S18. Jam in path R."
0000000
005A 304B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at front of returning stack unit. Jam between S52 and S44.
0000000 Jam in path F."
005A 304E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at rear temporary stack unit. Jam between S53 and S44.
0000000 Jam in path F, especially under the ESCROW."
005A 304F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at rear temporary stack unit. Jam between S51 and S44.
0000000 Jam in path F."
005A 3050_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at S50. Jam in input slot of ESCROW."
0000000
005A 3051_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at S51. Jam in path F at ESCROW output slot."
0000000
005A 3052_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at S52. Jam in path F at ESCROW output slot."
0000000
005A 3053_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at S53. Jam in path F at ESCROW output slot."
0000000
005A 3054_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at S54. Jam at safe input transport."
0000000
005A 3055_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at S55 Sensor shielded more than predefined time. Jam at
0000000 entrance of L2 box."
005A 3058_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S51 and S55."
0000000
005A 3059_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S54 and S70. Jam within the rear safe transport
0000000 (cash-in to safe)."
005A 305A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at front of temporary Stack Unit Jam between S52 and
0000000 S50. Jam in path F right in front of ESCROW."
005A 305B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S23 and S51."
0000000
005A 305C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at rear of temporary stack unit. Jam between S53 and
0000000 S52."
005A 305D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at rear of BID. Jam between S51 and S52."
0000000
005A 305E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at rear of BID. Jam between S23 and S52."
0000000
005A 305F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at path unit(R) in front of the entrance of flat path. Jam
0000000 between S51 and S54."
005A 3060_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at S60. Jam at safe transport (cash-out from safe) under I/
0000000 O module."
005A 3062_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at the entrance of cassette A. Jam at SA0. Exceeding stipu-
0000000 lated time, SA0 had turned ON."
005A 3063_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at the entrance of cassette B. Jam at SB0. Exceeding stipu-
0000000 lated time, SB0 had turned ON."
005A 3064_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at the entrance of cassette C. Jam at SC0. Exceeding stipu-
0000000 lated time, SC0 had turned ON."
005A 3065_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at S65,S66 or S67. Sensor shielded more than predefined
0000000 time. Jam at path F near I/O module."
005A 3067_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at the entrance of cssette ID. Jam at SD0. Exceeding stipu-
0000000 lated time, SD0 had turned ON."
005A 3068_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at S68. Sensor shielded more than predefined time. Jam at
0000000 path F near I/O module."

304 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A 306B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between the exit of flat path and the entrance of path unit
0000000 (F). Jam between S79 and S60."
005A 306E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S44 and S65/S66/S67. Jam in path F."
0000000
005A 306F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Half-size media is remained between S16 / S1A and S65 / S66
0000000 / S67. Half of a note stucking between dispensing slot (cash-in, lower inner tray in
I/O module)"
005A 3070_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at S70. Sensor shielded more than predefined time.
0000000 *Detected by tray controller."
005A 3071_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at S71. Sensor shielded more than predefined time.
0000000 *Detected by tray controller"
005A 3072_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at S72. Sensor shielded more than predefined time.
0000000 *Detected by tray controller "
005A 3073_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at S73. Sensor shielded more than predefined time.
0000000 *Detected by tray controller"
005A 3074_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at S74. Sensor shielded more than predefined time.
0000000 *Detected by tray controller"
005A 3075_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at S75. Sensor shielded more than predefined time.
0000000 *Detected by tray controller"
005A 3076_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at S76. Sensor shielded more than predefined time.
0000000 *Detected by tray controller"
005A 3077_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at S77. Sensor shielded more than predefined time.
0000000 *Detected by tray controller"
005A 3078_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at S78. Sensor shielded more than predefined time.
0000000 *Detected by tray controller"
005A 3079_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at S79. Sensor shielded more than predefined time.
0000000 *Detected by tray controller"
005A 307A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S71 and S73 or jam between S72 and S73.
0000000 *Detected by tray controller"
005A 307B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S73 and S75 or jam between S74 and S75.
0000000 *Detected by tray controller"
005A 307C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S75 and S77 or jam between S76 and S77.
0000000 *Detected by tray controller"
005A 307D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S77 and S79 or jam between S78 and S79.
0000000 *Detected by tray controller"
005A 307E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S51 and S70. *Detected by tray controller "
0000000
005A 3080_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at SY1. Sensor shielded more than predefined time.
0000000 *Detected by tray controller"
005A 3081_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at SY0. Sensor shielded more than predefined time.
0000000 *Detected by tray controller"
005A 3086_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S75 and S76. *Detected by tray controller."
0000000
005A 3087_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S75 and S77. *Detected by tray controller "
0000000
005A 3088_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S77 and S78. *Detected by tray controller."
0000000
005A 3089_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S77 and S79. *Detected by tray controller "
0000000
005A 308A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S70 and SY1. *Detected by tray controller "
0000000
005A 308B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S70 and S71. *Detected by tray controller "
0000000
005A 308C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S71 and S72. *Detected by tray controller "
0000000
005A 308D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S71 and S73. *Detected by tray controller "
0000000
005A 308E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S73 and S74. *Detected by tray controller "
0000000
005A 308F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S73 and S74. *Detected by tray controller "
0000000
005A 3090_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S70 and SY0. *Detected by tray controller "
0000000
005A 30A1_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Handling of notes slow after BID length between two notes is
0000000 too short at S51. *Detected by tray controller"
005A 30A3_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Handling of notes slow before FL5 length between two notes
0000000 is too short at S70 *Detected by tray controller"
005A 30A4_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Handling of notes slow before FL6 length between two notes
0000000 is too short at S71 *Detected by tray controller"
005A 30A5_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Handling of notes slow before FL7 length between two notes
0000000 is too short at S72 *Detected by tray controller"

May 2011 305

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A 30A6_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Length between two notes is too short at S73. Handling of
0000000 notes slow before FL8."
005A 4016_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S16 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal."
005A 4018_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S18 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal."
005A 401A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S1A shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal."
005A 4023_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S23 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal."
005A 402B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S2B shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal."
005A 402C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: FL3 returned to home position, but S65, S66, S67 shielded."
0000000
005A 402D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: FL3 returned to opposite position, but S23 shielded."
0000000
005A 4033_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S33 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal."
005A 4034_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S34 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal."
005A 4044_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S44 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal."
005A 4045_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S45 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal."
005A 404C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: FL2 returned to opposite position, but S44 shielded."
0000000
005A 4050_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S50 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal."
005A 4051_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S51 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal."
005A 4052_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S52 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal."
005A 4053_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S53 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal."
005A 4054_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S54 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal."
005A 4055_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S55 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal."
005A 405A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: FL1 returned to opposite position, but S51 shielded."
0000000
005A 405B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: FL2 returned to home position, but S50 shielded."
0000000
005A 405C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: FL1 returned to home position, but S54 shielded."
0000000
005A 405D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: FL10 returned to home position, but S55 shielded."
0000000
005A 405E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: FL10 returned to opposite position, but S54 shielded."
0000000
005A 4060_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S60 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal."
005A 4065_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S65 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal."
005A 4066_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S66 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal."
005A 4067_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S67 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal."
005A 4068_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S68 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal."
005A 4070_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S70 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal."
005A 4071_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S71 shielded at transportation: it must not be shielded - media
0000000 may be remained or Sensor is abnormal. *Detected by tray controller"
005A 4072_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S72 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal. *Detected by tray controller"
005A 4073_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S73 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal. *Detected by tray controller"
005A 4074_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S74 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal. *Detected by tray controller"
005A 4075_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S75 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal. *Detected by tray controller"

306 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A 4076_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S76 unexpected shielded."
0000000
005A 4077_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S77 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal. *Detected by tray controller"
005A 4078_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S78 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal. *Detected by tray controller "
005A 4079_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S79 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal. *Detected by tray controller "
005A 407B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: FL4 returned to opposite position, but S70 shielded."
0000000
005A 4080_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SY1 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal. *Detected by tray controller"
005A 4081_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SY0 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal. *Detected by tray controller "
005A 408B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: FL11 returned to opposite position, but S70 shielded."
0000000
005A 5004_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Note remained in outlet S2C shielded."
0000000
005A 5005_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Note remained in outlet S1A shielded."
0000000
005A 5006_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Note remained in outlet S2D shielded."
0000000
005A 500C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Note remained in outlet S2C shielded."
0000000
005A 5010_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S10 shielded "
0000000
005A 5012_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S12 shielded "
0000000
005A 5014_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S14 shielded"
0000000
005A 5015_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S15 shielded"
0000000
005A 5016_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S16 shielded "
0000000
005A 5018_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S18 shielded "
0000000
005A 501C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: One of S10 - S14 shielded before transportation."
0000000
005A 501D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Wrinkled note remained in outlet."
0000000
005A 501E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: One of S10 - S15 shielded."
0000000
005A 501F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Bucket or pressure plate not set at position of insertion at status
0000000 sense (idling sense) or sense of insertion/taking-out."
005A 5023_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S23 shielded "
0000000
005A 5028_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SW18 lighted shutter has not closed."
0000000
005A 5029_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SW19 shielded shutter has not closed."
0000000
005A 502A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SW17 shielded shutter has not closed."
0000000
005A 502B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S2B shielded "
0000000
005A 5033_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S33 shielded"
0000000
005A 5034_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S34 shielded"
0000000
005A 5035_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S35 Shielded"
0000000
005A 5038_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes remained in temporary stack Unit before transportation.
0000000 One of S30 - S32"
005A 503A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes can not be collected, because some part of notes are
0000000 already out of temporary stack unit."
005A 503E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: One of S30 - S32 shielded"
0000000
005A 5040_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S40 shielded"
0000000
005A 5044_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S44 shielded "
0000000

May 2011 307

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A 5045_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S45 shielded "
0000000
005A 5046_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S46 shielded"
0000000
005A 5048_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Returning Stack Unit tilted SW48 lighted."
0000000
005A 5049_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SW49 lighted"
0000000
005A 504A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S49 shielded"
0000000
005A 504C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S4C shielded"
0000000
005A 504E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: One of S1B,S1D,S1F,S2A shielded."
0000000
005A 5050_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S50 shielded "
0000000
005A 5051_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S51 shielded "
0000000
005A 5052_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S52 shielded "
0000000
005A 5053_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S53 shielded"
0000000
005A 5054_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S54 shielded "
0000000
005A 5055_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S55 shielded "
0000000
005A 5056_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S56 shielded "
0000000
005A 5058_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SW58 lighted"
0000000
005A 5059_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SW59 shielded"
0000000
005A 505C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SW5C shielded"
0000000
005A 505F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Signal of PLSW (safety switch) between head unit and safe
0000000 unit might be cut."
005A 5060_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S60 shielded "
0000000
005A 5065_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S65 shielded "
0000000
005A 5066_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S66 shielded "
0000000
005A 5067_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S67 shielded "
0000000
005A 5068_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S68 shielded "
0000000
005A 506F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Pass(F) tilted (SW49 lighted) "
0000000
005A 5070_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S70 shielded "
0000000
005A 5071_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S71 shielded "
0000000
005A 5072_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S72 shielded "
0000000
005A 5073_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S73 shielded."
0000000
005A 5074_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S74 shielded "
0000000
005A 5075_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S75 shielded "
0000000
005A 5076_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S76 shielded "
0000000
005A 5077_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S77 shielded "
0000000
005A 5078_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S78 shielded "
0000000
005A 5079_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S79 shielded "
0000000
005A 5080_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SY0 shielded "
0000000

308 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A 5081_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SY1 shielded "
0000000
005A 5082_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SY2 shielded "
0000000
005A 508F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Cassette not installed or IrDA abnormal."
0000000
005A 5090_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Retract Cassette not installed."
0000000
005A 509A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SW9A lighted "
0000000
005A 509B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SW9B lighted "
0000000
005A 509C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SW9C lighted "
0000000
005A 50A0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Both SA0 and SA1 shielded."
0000000
005A 50AA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media may be remained in cassette A or sensor is abnormal.
0000000 *Detected by tray controller"
005A 50AC_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media may be remained in cassette A or sensor is abnormal.
0000000 *Detected by tray controller"
005A 50AE_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: If cassette is empty, SA4 or SWAE may be abnormal."
0000000
005A 50B0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Both SB0 and SB1 shielded "
0000000
005A 50BA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media may be remained in cassette B or sensor is abnormal.
0000000 *Detected by tray controller"
005A 50BC_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media may be remained in cassette B or sensor is abnormal.
0000000 *Detected by tray controller"
005A 50BE_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: If cassette is empty, SB4 or SWBE may be abnormal."
0000000
005A 50C0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Both SC0 and SC1 shielded."
0000000
005A 50CA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media may be remained in cassette C or sensor is abnormal.
0000000 *Detected by tray controller"
005A 50CC_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media may be remained in cassette C or sensor is abnormal.
0000000 *Detected by tray controller"
005A 50CE_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: If cassette is empty, SC4 or SWCE may be abnormal."
0000000
005A 50D0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Both SD0 and SD1 shielded."
0000000
005A 50DA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media may be remained in cassette D or sensor is abnormal.
0000000 *Detected by tray controller"
005A 50DC_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media may be left in place in cassette D or sensor SWDC is
0000000 abnormal."
005A 50DE_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: If cassette is empty, SD4 or SWDE may be abnormal."
0000000
005A 50E0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SE0 shielded "
0000000
005A 50EA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media may be remained in reject cassette or sensor is
0000000 abnormal. *Detected by tray controller"
005A 50EC_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media may be remained in reject cassette or sensor is
0000000 abnormal. *Detected by tray controller"
005A 50F1_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SWAE lighted"
0000000
005A 50F2_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SWBE lighted"
0000000
005A 50F3_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SWCE lighted"
0000000
005A 50F4_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SWDE lighted"
0000000
005A 50FD_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SY0 shielded. Jam in front of reject cassette."
0000000
005A 50FE_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SY1 shielded "
0000000
005A 50FF_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: A command was received while the indicator was ON so that
0000000 the tray can be pulled out, or while accessing the Tray Sensor SW9E, reading the
cassette's"
005A 6003_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S14 not lighted at lighting/shielding for sensor level during
0000000 automatic adjustment."
005A 6004_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S15 not lighted at lighting/shielding for sensor level during
0000000 automatic adjustment."

May 2011 309

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A 6007_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S1F not lighted at lighting/shielding for sensor level during
0000000 automatic adjustment."
005A 6008_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S2A not lighted at lighting/shielding for sensor level during
0000000 automatic adjustment."
005A 6009_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S2C not lighted at lighting/shielding for sensor level during
0000000 automatic adjustment."
005A 600A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S2D not lighted at lighting/shielding for sensor level during
0000000 automatic adjustment."
005A 600B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S2E not lighted at lighting/shielding for sensor level during
0000000 automatic adjustment."
005A 6020_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: FRU device data of cassette A is abnormal."
0000000
005A 6021_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: FRU device data of cassette B is abnormal."
0000000
005A 6022_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: FRU device data of cassette C is abnormal."
0000000
005A 6023_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: FRU device data of cassette D is abnormal."
0000000
005A 6024_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: FRU device data of rejection unit is abnormal."
0000000
005A 6026_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Automatic adjustment for one of S10 - S16 not completed -
0000000 detected at Power ON."
005A 6027_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Automatic adjustment for DM11 not completed - detected at
0000000 Power ON."
005A 602A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SUM check abnormal for FRU device. Mapping data abnormal
0000000 or mapping not executed."
005A 602B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SUM check abnormal for FRU device. Mapping data abnormal
0000000 or mapping not executed."
005A 602C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SUM check abnormal for FRU device. Mapping data abnormal
0000000 or mapping not executed."
005A 602D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SUM check abnormal for FRU device. Mapping data abnormal
0000000 or mapping not executed."
005A 602E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SUM check abnormal for FRU device. Mapping data abnormal
0000000 or mapping not executed."
005A 602F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Cassette ID or SUM of denomination information abnormal."
0000000
005A 6030_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SW38 not shielded at rotation of PM30 - SW38 broken or
0000000 PM30 abnormal."
005A 6031_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SW38 not lighted at rotation of PM30 - SW38 broken or PM30
0000000 abnormal."
005A 6032_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2:
0000000 EBH_EXT_ESCROW_PM30_SPEED_NOT_COMPLETED"
005A 6033_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Speed of PM30 not completed slow down or fast up - case 2."
0000000
005A 6037_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S30 not lighted at lighting/shielding for sensor level during
0000000 automatic adjustment."
005A 6038_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S31 not lighted at lighting/shielding for sensor level during
0000000 automatic adjustment."
005A 6039_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S32 not lighted at lighting/shielding for sensor level during
0000000 automatic adjustment."
005A 603A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: DM32 not rotated at low-speed rotation or rotated too fast for
0000000 predefined speed."
005A 603B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: DM32 not rotated for predefined speed."
0000000
005A 603C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: DM32 not stopped by stop indication."
0000000
005A 603D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Automatic adjustment of DM32 executed, but speed too fast
0000000 for predefined or adjustment invalid."
005A 603E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Automatic adjustment of DM32 executed, but speed too slow
0000000 for predefined or adjustment invalid."
005A 603F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: DM32 ON, but motor not rotated - DM32 locked."
0000000
005A 604F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: DM40 ON, but Motor not rotated."
0000000
005A 6060_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Timed-up before completion of speed-up/down for PM30."
0000000
005A 6061_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S35 shielded after completion of dispensing."
0000000
005A 6080_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SWEB and SWEC both ON, one of switches broken."
0000000

310 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A 6081_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SWE9 and SWEA both not ON, but SWEA ON, one of
0000000 switches broken."
005A 6082_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal at reject cassette. PME1=ON,
0000000 but SWEC=OFF."
005A 6083_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PME1 ON, but SWE9 still ON."
0000000
005A 6084_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PME1 ON, but SWEB still ON."
0000000
005A 6085_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH_EXT_CASSETTE_SWEC"
0000000
005A 6086_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PME1 ON, and SWEC not ON, but SWE9 ON. *Detected by
0000000 tray controller"
005A 6087_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: DME2 ON, but not rotated."
0000000
005A 6088_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Althougth it is full, SWEA did not turn OFF even one time"
0000000
005A 6089_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PME1 time-out."
0000000
005A 608A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SE0 ON."
0000000
005A 608B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=ON SWEB OFF
0000000 SWEA OFF SWE9 ON)."
005A 608C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=OFF SWEB ON
0000000 SWEA OFF SWE9 OFF)."
005A 6090_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SUM Check abnormal for FRU Device. Mapping data
0000000 abnormal or mapping not executed."
005A 6091_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data written into FRU Device of Base Unit, but Data not same
0000000 after Read "
005A 6092_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data not written during predefined time - FRU broken or
0000000 Wiring abnormal "
005A 6095_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PLSW OFF. One interlock switch open."
0000000
005A 6096_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Pin installed for WDT. Jumper on mainboard installed for
0000000 debugging, should be off."
005A 6097_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: IOP not cut for tray controller. Problem in safe, power off for
0000000 motors."
005A 6098_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: IOP not cut for EBH Controller. Problem in mainunit, power
0000000 off for motors."
005A 6099_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: BID can not be initialized."
0000000
005A 609A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: IOPTH is not OFF for tray controller. Tray contoller switches
0000000 off mainboard due to a problem."
005A 609B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: IOPis not OFF for EBH controller. Mainboard switches off tray
0000000 controller due to a problem."
005A 609C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Metal detection can not be initialized, Change I/O module."
0000000
005A 60A0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SWAB and SWAC both ON ,one of switches broken."
0000000
005A 60A1_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SWA9 and SWAA both not ON, but SWAA ON, one of
0000000 switches broken."
005A 60A2_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMA1 ON, but SWAC not ON."
0000000
005A 60A3_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMA1 ON, but SWA9 still ON. *Detected by tray controller "
0000000
005A 60A4_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMA1 ON, but SWA9 still ON."
0000000
005A 60A5_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMA1 ON, but SWAC not ON."
0000000
005A 60A6_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMA1 ON, and SWAC not ON, but SWA9 ON."
0000000
005A 60A7_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: DMA2 ON, but not rotated, Detected by tray controller, and
0000000 detected by EBH controller during diagnostic test."
005A 60A8_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Althougth it is full, SWAA did not turn OFF even one time."
0000000
005A 60A9_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMB1 time-out, detected by tray controller."
0000000
005A 60AA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SB0 ON. *Detected by tray controller"
0000000
005A 60AB_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=ON SWEB OFF
0000000 SWEA OFF SWE9 ON)."

May 2011 311

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A 60AC_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=OFF SWEB ON
0000000 SWEA OFF SWE9 OFF."
005A 60B0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SWBB and SWBC both ON."
0000000
005A 60B1_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SWB9 and SWBA both not ON, but SWBA ON, one of
0000000 switches broken."
005A 60B2_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMB1 ON, but SWBC not ON."
0000000
005A 60B3_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMB1 ON, but SWB9 still ON."
0000000
005A 60B4_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMB1 ON, but SWBB still ON."
0000000
005A 60B5_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMB1 ON, but SWBC not ON."
0000000
005A 60B6_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMB1 ON, and SWBC not ON, but SWB9 ON."
0000000
005A 60B7_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: DMB2 ON, but not rotated."
0000000
005A 60B8_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Althougth it is full, SWBB did not turn OFF even one time."
0000000
005A 60B9_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMB1 time-out."
0000000
005A 60BA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SB0 ON."
0000000
005A 60BB_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The state of the sensor is contradicted (SWEC=ON SWEB
0000000 OFF SWEA OFF SWE9 ON)"
005A 60BC_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=OFF SWEB ON
0000000 SWEA OFF SWE9 OFF)"
005A 60C0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SWCB and SWCC both ON - one of switches broken."
0000000
005A 60C1_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SWC9 and SWCA both not ON, but SWCA ON, one of
0000000 switches broken."
005A 60C2_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMC1 ON, but SWCC not ON."
0000000
005A 60C3_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMC1 ON, but SWC9 still ON."
0000000
005A 60C4_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMC1 ON, but SWCB still ON."
0000000
005A 60C5_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMC1 ON, but SWCC not ON"
0000000
005A 60C6_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMC1 ON, and SWCC not ON, but SWC9 ON."
0000000
005A 60C7_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: DMC2 ON, but not rotated."
0000000
005A 60C8_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Althougth it is full, SWCC did not turn OFF even one time."
0000000
005A 60C9_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMC1 time-out."
0000000
005A 60CA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SC0 ON."
0000000
005A 60CB_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=ON SWEB OFF
0000000 SWEA OFF SWE9 ON)."
005A 60CC_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=OFF SWEB ON
0000000 SWEA OFF SWE9 OFF)"
005A 60D0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SWDB and SWDC both ON, one of switches broken."
0000000
005A 60D1_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SWD9 and SWDA both not ON, but SWDA ON, one of
0000000 switches broken."
005A 60D2_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMD1 ON, but SWDC not ON."
0000000
005A 60D3_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMD1 ON, but SWD9 still ON."
0000000
005A 60D4_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMD1 ON, but SWDB still ON."
0000000
005A 60D5_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMD1 ON, but SWDC not ON."
0000000
005A 60D6_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMD1 ON, and SWDC not ON, but SWC9 ON."
0000000
005A 60D7_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: DMD2 ON, but not rotated."
0000000

312 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A 60D8_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Althougth it is full, SWDD did not turn OFF even one time."
0000000
005A 60D9_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: PMD1 time-out."
0000000
005A 60DA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SD0 ON."
0000000
005A 60DB_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=OFF SWEB ON
0000000 SWEA OFF SWE9 OFF)."
005A 60DC_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Inconsistent sensor status (SWD9=OFF SWDB=ON
0000000 SWDC=OFF SWDA=OFF)."
005A 60E0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media indication abnormal for cassette A."
0000000
005A 60E1_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media indication abnormal for cassette B."
0000000
005A 60E2_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media indication abnormal for cassette C."
0000000
005A 60E3_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media indication abnormal for cassette D."
0000000
005A 60E5_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media indication abnormal for reject cassette."
0000000
005A 60E7_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Adjustment value set out of range for store unit F."
0000000
005A 60E8_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Denomination information abnormal for reject cassette."
0000000
005A 60E9_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rotation mechanism abnormal: at the reject cassette."
0000000
005A 60ED_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media indication abnormal for collection cassette."
0000000
005A 60F0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S35 not lighted at lighting/shielding for sensor level during
0000000 automatic adjustment."
005A 60F1_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Adjustment values not correct for outlet, temporary stack unit
0000000 and returning stack unit."
005A 60F2_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Adjustment values not set out of range for outlet, temporary
0000000 stack unit and returning stack unit."
005A 60F7_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Adjustment value set out of range for store unit A."
0000000
005A 60F8_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Adjustment value set out of range for store unit B."
0000000
005A 60F9_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Adjustment value set out of range for store unit C."
0000000
005A 60FA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Adjustment value set out of range for store unit D."
0000000
005A 60FB_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Denomination information abnormal for Ccssette A."
0000000
005A 60FC_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Denomination information abnormal for cassette B."
0000000
005A 60FD_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Denomination information abnormal for cassette C."
0000000
005A 60FE_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Denomination information abnormal for cassette D."
0000000
005A 60FF_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Serial no. of production duplicated."
0000000
005A 7010_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S10 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7012_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S12 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7014_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S14 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7015_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S15 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7016_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S16 abnormal. Power OFF, but sensor still lighted."
0000000
005A 701A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S1A abnormal. Power OFF, but sensor still lighted."
0000000
005A 701B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S1B abnormal. Power OFF, but sensor still lighted."
0000000
005A 701D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S1D abnormal. Power OFF, but sensor still lighted."
0000000
005A 701F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S1F abnormal. Power OFF, but sensor still lighted."
0000000

May 2011 313

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A 7023_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S23 abnormal. Power OFF, but sensor still lighted."
0000000
005A 702A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S2A abnormal. Power OFF, but sensor still lighted."
0000000
005A 702B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S2B abnormal. Power OFF, but sensor still lighted."
0000000
005A 702C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S2C abnormal. Power OFF, but sensor still lighted."
0000000
005A 702D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S2D abnormal. Power OFF, but sensor still lighted."
0000000
005A 702E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S2E abnormal. Power OFF, but sensor still lighted."
0000000
005A 7030_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S30 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7031_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S31 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7032_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S32 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7033_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S33 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7034_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S34 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7035_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S35 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7044_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S44 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7045_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S45 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7050_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S50 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7051_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S51 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7052_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S52 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7053_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S53 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7054_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S54 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7055_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S55 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7056_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S56 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7060_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S60 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7065_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S65 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7066_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S66 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7067_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S67 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7068_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S68 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7070_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S70 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7071_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S71 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7072_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S72 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7073_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S73 abnormal. Power OFF, but sensor still."
0000000
005A 7074_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S74 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7075_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S75 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7076_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S76 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7077_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S77 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7078_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S78 abnormal. Power OFF, but sensor still lighted."
0000000

314 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A 7079_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S79 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7080_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S80 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7081_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S81 abnormal. Power OFF, but sensor still lighted."
0000000
005A 7082_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S82 abnormal. Power OFF, but sensor still lighted."
0000000
005A 8010_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: No-dispensing, foreign material, skew-dispensing, dispensing
0000000 of some part of note or locking is detected 5 times by a command and finally no-
dispensing,"
005A 8012_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: More than 2 check sheets dispensed at transportation way.
0000000 Check or chained-dispensing, together-dispensing or half-folded dispensing
detected."
005A 8013_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: No-dispensing, foreign material, skew-dispensing, dispensing
0000000 of some part of note or locking is detected 5 times by a command and finally
foreign material"
005A 8014_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: No-dispensing, foreign material, skew-dispensing, dispensing
0000000 of some part of note or locking is detected 5 times by a command and finally
dispensing is"
005A 8015_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: No-dispensing, foreign material, skew-dispensing, dispensing
0000000 of some part of note or locking is detected 5 times by a command and finally
locking detected"
005A 8025_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Many BID other error."
0000000
005A 8026_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Many BID identification impossible error. BEB $040 - 42 "
0000000
005A 8030_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Transport locked, note locking is detected 5 times by a
0000000 command."
005A 8031_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Transport locked, note locking is detected 5 times by a
0000000 command."
005A 8090_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Running out of notes or picking no notes."
0000000
005A 80A0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Picking error retries exceeded in the cassette."
0000000
005A 80A5_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Picking error reties exceeded in cassette A, picking was
0000000 locked."
005A 80A6_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette A."
005A 80A7_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette A."
005A 80A8_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette A."
005A 80A9_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette A."
005A 80AA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette A."
005A 80AB_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette A."
005A 80AC_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette A."
005A 80AD_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette A."
005A 80B0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Picking error retries, Exceeded in the cassette B."
0000000
005A 80B5_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Picking error reties, Exceeded in the cassette B, picking was
0000000 locked."
005A 80B6_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette B."
005A 80B7_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette B."
005A 80B8_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette B."
005A 80B9_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette A."
005A 80BA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette A."
005A 80BB_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette B."
005A 80BC_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette B."

May 2011 315

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A 80BD_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette B."
005A 80C0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Picking error retries exceeded in the cassette C."
0000000
005A 80C5_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Picking error reties exceed in the cassette C, picking locked."
0000000
005A 80C6_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette C."
005A 80C7_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette C."
005A 80C8_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette C."
005A 80C9_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette C."
005A 80CA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette C."
005A 80CB_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette C."
005A 80CC_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette C."
005A 80CD_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette C."
005A 80D0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Picking error retries. Exceeded in the cassette D."
0000000
005A 80D5_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Picking error retries, exceeded in the cassette D, picking was
0000000 locked."
005A 80D6_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette D."
005A 80D7_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette D."
005A 80D8_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette D."
005A 80D9_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette D."
005A 80DA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette D."
005A 80DB_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette D."
005A 80DC_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette D"
005A 80DD_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
0000000 from the cassette D."
005A 9002_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Software error for pressure plate control at temporary stack
0000000 unit. Trouble detected at pressure plate control, but corresponding MTC
undefined."
005A 9003_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Software error for outlet control. Action indication of outlet
0000000 undefined."
005A 9004_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Software error for pressure plate control at temporary stack
0000000 unit. Action indication of temporary stack unit undefined."
005A 9005_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Software error for gate lever control at outlet. Trouble detected
0000000 at gate lever control, but corresponding MTC undefined."
005A 9006_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Software error for pressure plate control at returning stack unit.
0000000 Action indication of returning stack unit undefined."
005A 9007_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Software error for pressure plate control at returning stack unit.
0000000 Trouble detected at pressure plate control, but corresponding MTC undefined."
005A 9008_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Software error for pressure plate control at collection cassette.
0000000 Action indication of collection unit undefined."
005A 9009_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Software error for pressure plate control at collection cassette.
0000000 Trouble detected at cassette control, but corresponding MTC undefined."
005A 900D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Data of transportation status is
0000000 unexpected at transportation for collection: outlet."
005A 900E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Data of transportation status is
0000000 unexpected at transportation for storing."
005A 900F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Data of transportation status is
0000000 unexpected at transportation for reset."
005A 9010_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
0000000 internal processing subsidiary task processing unit."
005A 9011_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
0000000 internal processing internal communication control unit."
005A 9012_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
0000000 internal processing EBH controller."

316 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A 9013_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
0000000 internal processing transportation control unit."
005A 9014_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH sSoftware control error. Time-over for completion of
0000000 internal processing cassette controller."
005A 9015_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
0000000 internal processing outlet control unit."
005A 9018_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
0000000 internal processing temporary stack control unit."
005A 9019_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
0000000 internal processing main motor control unit."
005A 901A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
0000000 internal processing cassette controller A."
005A 901B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
0000000 internal processing cassette controller B."
005A 901C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
0000000 internal processing cassette controller C."
005A 901D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
0000000 internal processing cassette controller D."
005A 9022_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Denomination unmatched. Denomination for cassette A by
0000000 data write and information of cassette not matched."
005A 9024_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
0000000 internal processing: retract cassette control unit."
005A 9026_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Data of transportation status is
0000000 unexpected at transportation for returning."
005A 9027_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Trouble detected at suspension
0000000 processing of internal communication task before transportation."
005A 9028_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Trouble detected at start-up
0000000 processing of internal communication task after transportation."
005A 902B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Data of transportation status is
0000000 unexpected at transportation for deposit."
005A 902D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Data of transportation status is
0000000 unexpected at transportation for dispense."
005A 902F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Hardware error of EBH WDT-out for tray controller."
0000000
005A 9030_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Trouble detected internal commu-
0000000 nication."
005A 9031_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The type of safe pass that is read at Power ON does not corre-
0000000 spond with the"
005A 9037_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Trouble detected internal commu-
0000000 nication. Application error: erong denomination should be cashed in cassette A.
Sample:"
005A 9038_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Denomination unmatched. Denomination for cassette B by
0000000 data write and information of cassette not matched."
005A 9039_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Denomination unmatched. Denomination for cassette C by
0000000 data write and information of cassette not matched."
005A 903A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Denomination unmatched. Denomination for cassette D by
0000000 data write and information of cassette not matched."
005A 903B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Hardware error of EBH test of WDT-out abnormal. Time-out
0000000 communication mainbord -> tray controller."
005A 903C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Hardware error of EBH. Whole RAM clearing abnormal."
0000000
005A 903D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Received message abnormal at
0000000 tray controller."
005A 9050_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error or hardware error. Sensor power
0000000 control error."
005A 9051_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Lane is setting up for stacking, but dispense cassette is
0000000 installed."
005A 9052_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Denomination ID abnormal for cassette B. Lane is setting up
0000000 for stacking."
005A 9053_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Denomination ID abnormal for cassette C. Lane is setting up
0000000 for stacking, but dispense cassette is installed."
005A 9054_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Denomination ID abnormal for cassette D. Lane is setting up
0000000 for stacking, but dispense cassette is installed."
005A 9057_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Time-over for completion of command."
0000000
005A 905A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Denomination ID not set or it maybe not read."
0000000
005A 905B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Denomination ID not set or it maybe not read."
0000000
005A 905C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Denomination ID not set or it maybe not read."
0000000

May 2011 317

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A 905D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Denomination ID not set or it maybe not read."
0000000
005A 9060_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Command data of transportation
0000000 handler abnormal: set of flapping test abnormal."
005A 9061_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The feeding lane is empty, detected by Handler."
0000000
005A 9062_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Denomination ID abnormal for reject cassette. Denomination
0000000 ID setting data is abnormal."
005A 9064_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-out of waiting for echo
0000000 check completion: echo check is requested to internal communication unit, but no
completion"
005A 9065_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-out of waiting for echo
0000000 check completion: error of echo check."
005A 9066_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Denomination ID setting data is abnormal. Data from BEB do
0000000 match to cassette (wrong ID`s)."
005A 9067_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Denomination ID setting data is abnormal, data from BEB do
0000000 match to cassette (wrong ID`s)."
005A 9068_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Denomination ID setting data is abnormal, data from BEB do
0000000 match to cassette (wrong ID`s)."
005A 9069_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Denomination ID setting data is abnormal. Data from BEB do
0000000 match to cassette (wrong ID`s)."
005A 906A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: FRU device data abnormal for cassette A. SUM check
0000000 abnormal for denomination. *Detected by EBH controller "
005A 906B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: FRU device data abnormal for cassette B. SUM check
0000000 abnormal for denomination. *Detected by EBH controller "
005A 906C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: FRU device data abnormal for cassette C. SUM check
0000000 abnormal for denomination. *Detected by EBH controller "
005A 906D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: FRU device data abnormal for cassette D. SUM check
0000000 abnormal for denomination. *Detected by EBH controller"
005A 906E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: FRU device data abnormal for reject cassette. SUM check
0000000 abnormal for denomination."
005A 906F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-out of waiting for FRU
0000000 device completion. No communication to cassette EEPROM."
005A 9070_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Indication code of main motor
0000000 control abnormal: action indicated during rotation - detected by motor handler."
005A 9071_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Control indicated, but not completed after 15 seconds -
0000000 detected motor handler."
005A 9072_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes disappeared in outlet when they must be stayed. Empty
0000000 in Ootlet, when dispensing handler is launched - detected transportation handler."
005A 9073_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes disappeared in temporary stack unit when they must be
0000000 stayed. Empty in temporary stack unit, when dispensing handler is launched -
detected"
005A 9074_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Time-over for cction of transportation handler. Action not
0000000 completed after predefined time by handler."
005A 9075_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Command data of transportation
0000000 hander abnormal - ACT2 abnormal."
005A 9076_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Command data of transportation
0000000 hander abnormal - set of limitation number of notes for temporary stack unit
abnormal."
005A 9077_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Command data of transportation
0000000 hander abnormal - set of dispensing number of notes abnormal."
005A 9078_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Relay monitoring area insuffi-
0000000 cient: area not allocated to writing arrival time for relay sensor."
005A 9079_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. BMT insufficient: area not
0000000 allocated during transportation - detected by transportation handler."
005A 907A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. BRT insufficient: area not
0000000 allocated during transportation - detected by transportation handler."
005A 907B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Memory data destroyed: data
0000000 which transportation handler uses is unexpected - memory maybe broken."
005A 907C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Unhypothetical note detected at
0000000 flapping: two or more than notes are waiting for flapping at same time."
005A 907D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Command data of transportation
0000000 hander abnormal: set of acceptable media abnormal."
005A 907E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Command data of transportation
0000000 hander abnormal: set of destination for denominations abnormal."
005A 9080_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Transportation handlers dupli-
0000000 cated launched: another transportation handler launched again during execution"
005A 9081_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-out for action of transpor-
0000000 tation handler - execution of transportation handler not completed after predefined
time."
005A 9082_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Recognition data of transportation
0000000 handler abnormal: denomination data not satisfied, but notes accepted."

318 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A 9083_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Recognition data of transportation
0000000 handler abnormal: recognition is NG, but notes accepted."
005A 9084_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Data of transportation handler
0000000 abnormal: transportation handler receives dispensing from not-installed cassette."
005A 9088_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Memory broken: recognition
0000000 response data BRT of transportation invalid."
005A 908C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Data of transportation handler
0000000 abnormal: motor stop indicated during transportation - detected by transportation
handler."
005A 90C1_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Memory data destroyed: data
0000000 which transportation handler uses is unexpected - memory maybe broken."
005A 90C2_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. BMT insufficient: area not
0000000 allocated during transportation - detected by transportation handler."
005A 90C3_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. BRT insufficient: area not
0000000 allocated during transportation - detected by rransportation handler."
005A 90C4_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Relay monitoring area insuffi-
0000000 cient: area not allocated to writing arrival time for relay sensor."
005A 90C5_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Unhypothetical note detected at
0000000 flapping: two or more than notes are waiting for flapping at same time."
005A 90C6_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Memory data destroyed: BRT
0000000 which transportation handler uses is unexpected - memory maybe broken."
005A 90C7_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error. Memory data destroyed at trans-
0000000 portation handler. *Detected by tray controller "
005A 90C8_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Control indicated, but not completed after 3 seconds in trans-
0000000 portation handler."
005A 90C9_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It tried IOP signal of tray to turn OFF, but it did not turn OFF.
0000000 (Although the IOP signal is OFF, the motor run.)"
005A 90CA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The TG interruption processing stopped while conveying. TG
0000000 line is abnormal."
005A 90CB_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray software control error. Command error (message which
0000000 tray controller receive from EBH controller is abnormal)."
005A 90CF_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: TG Line abnormal. Executing of command, interrupt signal of
0000000 TG. Electrical noise on the wire."
005A 90D0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Error of sequence. EBH controller send signal of S51-ON in
0000000 serial order. *Detected by tray controller "
005A 90D1_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Error of sequence. EBH controller send signal of S51-OFF in
0000000 serial order. *Detected by tray controller "
005A 90D2_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray software control error. Time-over for completion of
0000000 internal processing in pressure plate control at cassette A."
005A 90D3_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray software control error. Time-over for completion of
0000000 internal processing in pressure plate control at cassette B."
005A 90D4_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray software control error. Time-over for completion of
0000000 internal processing in pressure plate control at cassette C."
005A 90D5_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray software control error. Time-over for completion of
0000000 internal processing in pressure plate control at cassette D."
005A 90D6_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray software internal command timing abnormal. Executing
0000000 of pressure plate control at cassette A, send command again."
005A 90D7_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray software internal command timing abnormal. Executing
0000000 of pressure plate control at cassette B, send command again."
005A 90D8_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray software internal command timing abnormal. Executing
0000000 of pressure plate control at cassette C, send command again."
005A 90D9_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray software internal command timing abnormal. Executing
0000000 of pressure plate control at cassette D, send command again."
005A 90DA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray software control error time-over for completion of
0000000 internal processing in pressure plate control at reject cassette."
005A 90DB_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray software internal command timing abnormal. Executing
0000000 of pressure plate control at reject cassette, send command again."
005A 90DD_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It tried to read data from EEPROM device of Reject cassette,
0000000 but there was no"
005A 90DE_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It tried to write data to EEPROM Device of Reject cassette but
0000000 there were no"
005A 90DF_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It tried to write data to EEPROM Device of Reject cassette, but
0000000 verify-error"
005A 90E0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: IOP cut for EBH controller. *Detected by tray controller "
0000000
005A 90E2_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray software control error. Rejection unit controller appointed
0000000 undefined sensor."
005A 90E3_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The interrupt processing test was executed in synthetic
0000000 mechanical test, but it failed. There was no interruption processing of S70-S79,
S80."
005A 90E4_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It tried to read data from FRU device of cassette A, but there
0000000 were no response. FRU device line is abnormal."

May 2011 319

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A 90E5_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It tried to read data from FRU device of cassette A, but there
0000000 were no response. FRU device line is abnormal."
005A 90E6_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It tried to write data to FRU device of cassette A, but verify-
0000000 error was occurred. FRU device line is abnormal."
005A 90E7_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It tried to read data from FRU device of cassette B, but there
0000000 were no response. FRU device line is abnormal."
005A 90E8_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It tried to read data from FRU device of cassette B, but there
0000000 were no response. FRU device line is abnormal."
005A 90E9_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It tried to write data to FRU device of cassette B, but verify-
0000000 error was occurred FRU device line is abnormal."
005A 90EA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It tried to read data from FRU device of cassette C, but there
0000000 were no response FRU device line is abnormal."
005A 90EB_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It tried to read data from FRU device of cassette C, but there
0000000 were no response FRU device line is abnormal."
005A 90EC_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It tried to write data to FRU device of cassette C, but verify-
0000000 error was occurred FRU device line is abnormal."
005A 90ED_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It tried to read data from FRU device of cassette D, but there
0000000 were no response FRU device line is abnormal."
005A 90EE_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It tried to read data from FRU device of cassette D, but there
0000000 were no response FRU device line is abnormal."
005A 90EF_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It tried to write data to FRU device of cassette D, but verify-
0000000 error was occurred FRU device line is abnormal."
005A A009_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet. Notes must be remained in
0000000 outlet by status from transportation control (after returning of notes from outlet)"
005A A00A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet after initial reset is prepro-
0000000 cessed, S10,S12,S14,S15 are not lighting."
005A A00D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in I/O module or notes are detected
0000000 when they are not remained after transportation for returning reject notes to I/O
module."
005A A00E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in ESCROW unit or notes are detected
0000000 when they are not remained."
005A A00F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in ESCROW unit or notes are detected
0000000 when they are not remained."
005A A010_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet. S10,S12,S14,S15 are not
0000000 shielded when bucket is set at position of Dispensing - before deposit transpor-
tation."
005A A011_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are detected when they are not remained in outlet. Either
0000000 S1B,S1D,S1F,S2A is shielded when outlet is moved - before deposit transpor-
tation."
005A A012_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected by mistake
0000000 when they are not remained. Result of remaining check is changed when bucket is
moved"
005A A013_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
0000000 are not remained"
005A A014_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet after transportation for deposit
0000000 S10, S12, S14, S15"
005A A016_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are detected in outlet after processing identification by
0000000 the create reference signature. Either S10, S12, S14, S15 is shielded."
005A A01C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
0000000 are not remained after transportation for dispense, or the bucket position is
abnormal"
005A A01D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
0000000 are not remained before transportation for dispense. S10, S12, S14, S15"
005A A01E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in rejected note ESCROW Unit or notes
0000000 are detected when they are not remained in pressure plate moved for returning
reject notes"
005A A01F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet when pressure plate moved at
0000000 outlet after transportation for dispense. S10, S12, S14, S15"
005A A020_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The picking status error in the cassette A. After notes were feed
0000000 with the status "empty"."
005A A021_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The picking status error in the cassette B. After notes were feed
0000000 with the status "empty"."
005A A022_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The picking status error in the cassette C. After notes were feed
0000000 with the status "empty."."
005A A023_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The picking status error in the cassette D. After notes were fed
0000000 with the status "empty"."
005A A024_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet. Accumulation of notes is
0000000 reported by transportation control after returning transportation
005A A026_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Invalid number of dispensed notes."
0000000

320 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A A027_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet. Result of remaining check is
0000000 changed when bucket is set at position of accumulation - before dispensing trans-
portation"
005A A028_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are detected when they are not remained in outlet. One
0000000 of S1B, 1D, 1F, S2A is shielded when outlet is set at position of transportation
position"
005A A029_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in temporary stack unit."
0000000
005A A02A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
0000000 are not remained. Result of remaining check is changed before returning retry"
005A A02B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in temporary stack unit or notes are
0000000 detected when they are not remained."
005A A02C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in temporary stack unit or notes are
0000000 detected when they are not remained."
005A A02D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Number of notes in temporary stack unit and number of
0000000 returned notes are not same."
005A A02E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
0000000 are not remained. Result of remaining check is changed when bBucket is moved"
005A A030_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in temporary stack unit."
0000000
005A A031_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
0000000 are not remained. Result of remaining check is changed when bucket is moved"
005A A033_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in temporary stack unit or notes are
0000000 detected when they are not remained."
005A A034_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in temporary stack unit."
0000000
005A A037_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Number of stacked notes in temporary stack unit and number
0000000 of recognized notes are not same after storing transportation."
005A A038_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Number of recognized notes and number of stored notes are not
0000000 same at storing."
005A A03D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are not remained in outlet, but they are detected at
0000000 synthetic transportation test."
005A A03E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are not remained in temporary stack unit, but they are
0000000 detected."
005A A03F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are not remained in returning stack unit, but detected at
0000000 synthetic transportation test."
005A A047_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
0000000 are not remained."
005A A04A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
0000000 are not remained."
005A A04B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
0000000 are not remained."
005A A04C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: There are abnormalities in a passage check."
0000000
005A A04D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
0000000 are not remained."
005A A04E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or are notes detected when they
0000000 are not remained."
005A A04F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in temporary stack unit or notes are
0000000 detected when they are not remained."
005A A050_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
0000000 are not remained."
005A A054_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
0000000 are not remained."
005A A055_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
0000000 are not remained."
005A A056_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
0000000 are not remained."
005A A05A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in temporary stack unit or notes are
0000000 detected when they are not remained."
005A A060_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rear D lane S60. Abnormal interruption S60 cannot be turned
0000000 ON. S60 (cash-out transport from safe) is blocked but should be free."
005A A061_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rear D lane S54. Abnormal interruption S54 cannot be turned
0000000 ON. S54 (cash-in transport to safe) is blocked but should be free."
005A A062_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Abnormal interruption of S55. S55 cannot be turned ON."
0000000
005A A06B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Count of BID and count of accumulation place at S54 are not
0000000 same. Check is executed for each denomination."
005A A06C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: There is/are rejects, but value counted at accumulation sensor
0000000 S54 is 0. Note do not reach cash-in transport (S54)."
005A A06D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: There is/are rejects, but number of interrupts at accumulation
0000000 sensor S54 is 0. Note do not reach cash-in transport (S54)."

May 2011 321

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A A06E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: There are no rejects, but there is interrupt at accumulation
0000000 sensor S54. Note do not reach cash-in transport (S54)."
005A A071_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Number of recognized notes by BID and number of calculated
0000000 notes are not same."
005A A072_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Number of stacked notes in temporary stack unit and count of
0000000 S30 interrupts are not same."
005A A074_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Count of S22/S24/S25/S26 and count of S50 are not same."
0000000
005A A075_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Number of stacked notes in temporary stack unit and count of
0000000 FL2 are not same."
005A A07A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection of notes is set in recognition response after transpor-
0000000 tation, but count of S46/47 is 0."
005A A07B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection of notes is set in recognition response after transpor-
0000000 tation, but interrupt count of S46/47 is 0."
005A A07C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Rejection of notes is not set in recognition response after trans-
0000000 portation, but interrupt of S46/47 is detected."
005A A07D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Calculation abnormal. Rejection of notes is not set in recog-
0000000 nition response after transportation."
005A A07E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Calculation abnormal. Rejection of notes is set in recognition
0000000 response after transportation."
005A A081_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Another note which was recognized is detected at Storing.
0000000 Reader swapped ID after second feed."
005A A082_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet. The note was not able to be
0000000 detected in the transporting path."
005A A083_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are disappeared in temporary stack unit. Notes are trans-
0000000 ported into temporary stack unit."
005A A084_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Number of note which indicated by EBH controller and count
0000000 of tray controller are not same."
005A A085_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Number of reject note which indicated by EBH controller and
0000000 count of tray controller are not same."
005A A092_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Calculation abnormal: number of dispense notes."
0000000
005A A093_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Calculation abnormal: number of dispense notes."
0000000
005A A094_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Number of accumulated notes in cassette A abnormal."
0000000
005A A095_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Number of accumulated notes in cassette B abnormal."
0000000
005A A096_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Number of accumulated notes in cassette C abnormal."
0000000
005A A097_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Number of accumulated notes in cassette D abnormal."
0000000
005A A09A_E ?0J40 8000000000 000DI01:3F:39p34 "CASHOUT RM2: Different denomination picked from Cassette A. Wrong
0000000 denomimation loaded to cassette A."
005A A09B_E ?0J40 8000000000 000DI01:3F:39p34 "CASHOUT RM2: Different denomination picked from Cassette B. Wrong
0000000 denomimation loaded to cassette B."
005A A09C_E ?0J40 8000000000 000DI01:3F:39p34 "CASHOUT RM2: Different denomination picked from Cassette C. Wrong
0000000 denomimation loaded to cassette C."
005A A09D_E ?0J40 8000000000 000DI01:3F:39p34 "CASHOUT RM2: Different denomination picked from cassette D. Wrong
0000000 denomimation loaded to cassette D."
005A A0A1_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Value count at S65, S66, S67 > value count at S2B "
0000000
005A A0A2_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Value count at S65, S66, S67 > value count at S2B "
0000000
005A A0B7_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Note is transported into entrance of tray, when it is not destined
0000000 to returning entrance of tray."
005A A0B8_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Note is transported into outlet of tray, when it is not destined to
0000000 returning outlet of tray."
005A A0B9_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Note is transported into outlet unit, when it is not destined to
0000000 outlet unit."
005A A0BA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Note is transported into temporary stack unit, when it is not
0000000 destined to temporary stack unit."
005A A0BB_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Note is transported into L2 box, when it is not destined to L2
0000000 box."
005A A0C1_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Note is transported into cassette A, when it is not destined to
0000000 there. *Detected by tray controller"
005A A0C2_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Note is transported into cassette B, when it is not destined to
0000000 there. *Detected by tray controller"
005A A0C3_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Note is transported into cassette C, when it is not destined to
0000000 there. *Detected by tray controller"

322 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A A0C4_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Note is transported into cassette D, when it is not destined to
0000000 there. *Detected by tray controller"
005A A0C7_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes are transported to unexpected direction. Note is trans-
0000000 ported into retract cassette, when it is not destined to there."
005A A0C8_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Note is transported into reject, when it is not destined to there.
0000000 *Detected by tray controller"
005A A0CA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: No reject note, but reject sensor detect notes. *Detected by tray
0000000 controller "
005A A0D1_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Subtract number of accumulation cassette B, C, D from count
0000000 of S71 and count of S72 are not same. *Detected by tray controller"
005A A0D2_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Subtract number of accumulation cassette C, D from count of
0000000 S73 and count of S74 are not same. *Detected by tray controller"
005A A0D3_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Subtract number of accumulation Cassette D from count of S75
0000000 and count of S77 are not same. *Detected by tray controller"
005A A0D4_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Count of S77 and count of S78 are not same. *Detected by tray
0000000 controller "
005A A0D5_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Number of accumulation for cassette A, B, C and D and count
0000000 of S51 are not same."
005A A0D6_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Count of S70 and count of S51 are not same."
0000000
005A B001_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: After request for transmission to BID, tesponse data is not
0000000 embedded in ting buffer."
005A B002_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Request for transmission of the reception block, sequence
0000000 abnormal, retries exceeded."
005A B003_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Request for transmission of the reception block, CRC check
0000000 error, retries exceeded."
005A B004_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Request for transmission of the reception block, time-out of
0000000 waiting for response, retries exceeded."
005A B005_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Request for transmission of the reception block, over-run/
0000000 parity abnormal, retries exceeded."
005A B006_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The event that was not sure to exist in the matrix was
0000000 generated."
005A B007_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: It doesn't return even if the response from BID passes 26
0000000 seconds."
005A B008_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: The command transmission completion is not done. Or,
0000000 reception completion receipt transmission completion is not done."
005A B009_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: A soft error: There is no reception receipt though the receipt
0000000 reception event was generated. (illegal event)"
005A B00A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: A soft error: There is no reception response though the
0000000 response reception event was generated. (illegal event)"
005A B00B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Transmission error generation when response is received."
0000000
005A B00C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: BID status error. The state doesn't become normal though it
0000000 confirmed to BID with status request."
005A B020_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Transportation is cancelled, because response for recognition
0000000 is not transmitted from BID."
005A C000_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C001_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Command time-out. Communication error (BEB error $001) "
0000000
005A C002_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Command execution interrupted. Communication error(BEB
0000000 error $002) "
005A C003_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Command not expected. Communication error (BEB error
0000000 $003) "
005A C004_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Data length or content of the command invalid. Communi-
0000000 cation error (BEB error $004)"
005A C005_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Data length invalid. Communication error (BEB error $005) "
0000000
005A C006_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $006) "
0000000
005A C007_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $007) "
0000000
005A C008_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $008) "
0000000
005A C009_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Data length invalid. Communication error (BEB error $005) "
0000000
005A C00A_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $00A) "
0000000
005A C00B_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Argument not admissible. Communication error (BEB error
0000000 $00B) "

May 2011 323

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A C00C_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Defective data. Data error (BEB error $00C) "
0000000
005A C00D_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C00E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Unknown error from banknote validator."
0000000
005A C00F_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C010_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $010) "
0000000
005A C011_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $011) "
0000000
005A C012_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $012) "
0000000
005A C013_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $013) "
0000000
005A C014_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Supporting memory space deleted. Note table (BEB error
0000000 $014) "
005A C015_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Supporting memory space deleted. Note table (BEB error
0000000 $015) "
005A C016_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Note from supporting memory recovered. Note table (BEB
0000000 error $016) "
005A C017_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Note from supporting memory not recoverable Note table
0000000 (BEB error $017) "
005A C018_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Extension module not available. Hardware error (BEB error
0000000 $018) "
005A C019_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Corrupt entries in note table deleted. Note table (BEB error
0000000 $019) "
005A C01A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Unknown error from banknote validator."
0000000
005A C01B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Unknown error from banknote validator."
0000000
005A C01C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Unknown error from banknote validator."
0000000
005A C01D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Unknown error from banknote validator."
0000000
005A C01E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Unknown error from banknote validator."
0000000
005A C01F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Unknown error from banknote validator."
0000000
005A C020_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $020) "
0000000
005A C021_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $021) "
0000000
005A C022_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Conflict of firmware version. Firmware error (BEB error $022)
0000000 "
005A C023_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $023) "
0000000
005A C024_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $024) "
0000000
005A C025_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $025) "
0000000
005A C026_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $026) "
0000000
005A C027_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $027) "
0000000
005A C028_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $028) "
0000000
005A C029_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $029) "
0000000
005A C02A_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $02A) "
0000000
005A C02B_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $02B) "
0000000
005A C02C_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Transport clock missing or outside permitted tolerance. Reader
0000000 module maintenance (BEB error $02C)"
005A C02D_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Note level detected (light level too high due to soiled roller or
0000000 because a document is under reader window)."
005A C02E_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Illumination regulation failed. Hardware error (BEB error
0000000 $02E) "

324 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A C02F_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Extrinsic light in reader module. Reader module maintenance
0000000 (BEB error $02F) "
005A C030_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $030) "
0000000
005A C031_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware test failed. Hardware error (BEB error $031) "
0000000
005A C032_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $032) "
0000000
005A C033_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $033) "
0000000
005A C034_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Communication time-out extension module 1. Hardware error
0000000 (BEB error $034) "
005A C035_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Communication time-out extension module 2. Hardware error
0000000 (BEB error $035) "
005A C036_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Communication time-out additional module. Hardware error
0000000 (BEB error $036) "
005A C037_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: UV-tube reader 1 malfunctioning > Reader module mainte-
0000000 nance. Reader module maintenance (BEB error $037)"
005A C038_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: UV-tube reader 2 malfunctioning. Reader module maintenance
0000000 (BEB error $038) "
005A C039_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $039) "
0000000
005A C03A_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Corrupt EAROM parameter. Firmware error (BEB error $03A)
0000000 "
005A C03B_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C03C_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C03D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Unknown error from banknote validator."
0000000
005A C03E_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C03F_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C040_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Note memory space empty. Data error (BEB error $040) "
0000000
005A C041_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Note memory space occupied. Data error (BEB error $041) "
0000000
005A C042_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Note data corrupt. Data error (BEB error $042) "
0000000
005A C043_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Auxiliary memory space occupied Note table (BEB error
0000000 $043) "
005A C044_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Data on auxiliary memory space corrupt. Note table (BEB
0000000 error $044) "
005A C045_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Note memory address invalid. Data error (BEB error $045) "
0000000
005A C046_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Note data too large. Data error (BEB error $046) "
0000000
005A C047_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Note memory full. Note table (BEB error $047) "
0000000
005A C048_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Signature format incorrect. Data error (BEB error $048) "
0000000
005A C049_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Signature version incorrect. Data error (BEB error $049) "
0000000
005A C04A_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Data error (BEB error $04A) "
0000000
005A C04B_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Signature data corrupt. Data error (BEB error $04B) "
0000000
005A C04C_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Signature data CRC incorrect. Data error (BEB error $04C) "
0000000
005A C04D_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Currency data CRC incorrect. Data error (BEB error $04D) "
0000000
005A C04E_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Data error (BEB error $04E) "
0000000
005A C04F_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: ROM check CRC incorrect. Reader module maintenance (BEB
0000000 error $050) "
005A C050_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Tape sensor not responding. Communication error (BEB error
0000000 $051) "
005A C051_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Command execution on tape sensor failed. Firmware error
0000000 (BEB error $052) "

May 2011 325

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A C052_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Tape sensor calibration failed. Hardware error (BEB error
0000000 $053) "
005A C053_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Tape sensor firmware download failed. Hardware error (BEB
0000000 error $054) "
005A C054_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Corrupt firmware on tape sensor. Firmware error (BEB error
0000000 $055) "
005A C055_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C056_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C057_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C058_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C059_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C05A_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C05B_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C05C_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C05D_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C05E_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C05F_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C060_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Format check message incorrect. Data error (BEB error $060)
0000000 $P"
005A C061_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C062_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C063_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C064_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C065_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C066_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C067_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C068_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C069_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C06A_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C06B_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C06C_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C06D_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C06E_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C06F_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C070_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C071_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C072_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C073_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C074_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000

326 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A C075_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C076_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C077_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C078_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C079_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C07A_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C07B_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C07C_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C07D_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C07E_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C07F_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C080_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C081_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C082_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C083_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C084_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C085_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C086_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C087_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C088_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C089_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C08A_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C08B_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C08C_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C08D_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C08E_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C08F_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C090_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C091_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C092_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C093_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C094_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C095_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C096_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C097_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000

May 2011 327

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A C098_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C099_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C09A_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C09B_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C09C_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C09D_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C09E_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C09F_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0A0_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0A1_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0A2_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0A3_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0A4_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0A5_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0A6_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0A7_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0A8_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0A9_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0AA_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0AB_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0AC_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0AD_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0AE_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0AF_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0B0_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0B1_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0B2_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0B3_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0B4_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0B5_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0B6_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0B7_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0B8_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0B9_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0BA_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000

328 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A C0BB_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0BC_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0BD_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0BE_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0BF_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0C0_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0C1_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0C2_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0C3_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0C4_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0C5_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0C6_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0C7_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0C8_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0C9_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0CA_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0CB_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0CC_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0CD_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0CE_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0CF_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0D0_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0D1_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0D2_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0D3_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0D4_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0D5_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0D6_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0D7_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0D8_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0D9_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0DA_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0DB_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0DC_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0DD_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000

May 2011 329

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A C0DE_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0DF_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0E0_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0E1_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0E2_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0E3_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0E4_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0E5_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0E6_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0E7_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0E8_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0E9_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0EA_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0EB_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0EC_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0ED_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0EE_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0EF_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0F0_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0F1_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0F2_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0F3_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0F4_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0F5_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0F6_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0F7_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0F8_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0F9_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0FA_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0FB_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0FC_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0FD_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0FE_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A C0FF_E ?0354 8000000000 000DI01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
0000000
005A D001_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Half-size note detected by dispensing from outlet."
0000000

330 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A E080_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Erase error for flash memory. Erase command is transmitted to
0000000 flash memory, but error is replied."
005A E081_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Write error for flash memory. Write command is transmitted to
0000000 flash memory, but error is replied."
005A E082_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Write data for flash memory abnormal. Write data and read
0000000 data are not same after data write."
005A E0F0_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data of PDL command abnormal. Write data is abnormal."
0000000
005A E0F1_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: SUM of PDL abnormal. SUM check error is detected after
0000000 normal completion of PDL."
005A E0FA_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data of PDL command abnormal. Chain Control Data is
0000000 abnormal."
005A E0FC_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data of PDL command abnormal. ID of CNTL is not correct."
0000000
005A E0FD_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data of PDL command abnormal. BCC is not correct."
0000000
005A E0FF_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Data of PDL command abnormal. 2nd byte of CNTL is not
0000000 defined."
005A F001_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Communication troubled between main software and EBH.
0000000 System error detected at EBH."
005A F002_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Communication troubled between main software and EBH.
0000000 Time-out of WDT."
005A F003_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Communication troubled between main software and EBH."
0000000
005A F004_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Communication troubled between main software and EBH."
0000000
005A F029_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
0000000 controller failed."
005A F025_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
0000000 controller failed."
005A F02A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
0000000 controller failed."
005A F02B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
0000000 controller failed."
005A F02C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
0000000 controller failed."
005A F015_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Time-out or receiving
0000000 of NAK is detected."
005A F009_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Memory data destroyed. Memory data destroyed because of
0000000 memory back-up dead."
005A F011_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: LAN of internal communication control abnormal. Status
0000000 abnormal at completion of transmission."
005A F027_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
0000000 controller failed."
005A F013_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal."
0000000
005A F028_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
0000000 controller failed."
005A F020_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
0000000 controller failed."
005A F021_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
0000000 controller failed."
005A F022_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
0000000 controller failed."
005A F023_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
0000000 controller failed."
005A F024_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
0000000 controller failed."
005A F026_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
0000000 controller failed."
005A F014_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal."
0000000
005A F012_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal."
0000000
005A F047_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
0000000
005A F04B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
0000000
005A F02D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
0000000 controller failed."

May 2011 331

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A F04A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
0000000
005A F02E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
0000000 controller failed."
005A F048_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
0000000
005A F046_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
0000000
005A F045_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
0000000
005A F044_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
0000000
005A F043_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
0000000
005A F042_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
0000000
005A F041_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
0000000
005A F04D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
0000000
005A F031_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal."
0000000
005A F030_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
0000000 controller failed."
005A F02F_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
0000000 controller failed."
005A F091_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal."
0000000
005A F04E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
0000000
005A F04C_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
0000000
005A F040_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
0000000
005A F049_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
0000000
005A 408A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: FL4 returned to home position, but S80 shielded."
0000000
005A 1029_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
0000000
005A 904D_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error or hardware error. EBH control
0000000 carry out wording-of-a-telegram transmission at the tray control"
005A 904E_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: EBH software control error or hardware error. EBH control
0000000 carry out wording-of-a-telegram transmission at the BID"
005A 5017_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes can not be collected, because some part of notes are
0000000 already out of outlet."
005A 501A_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes can not be collected, because some part of notes are
0000000 already out of outlet, notes are already out of outlet obliquely"
005A 501B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Notes can not be collected after no-dispensing."
0000000
005A 500B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S14 shielded "
0000000
005A 10E9_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
0000000 generated according to illegal timing of SW1C watch time-up event."
005A 10E6_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
0000000 generated according to illegal timing of SW1C ON or OFF event."
005A 00DC_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Media may be remained in cassette D or sensor is abnormal.
0000000 *Detected by tray controller"
005A 3026_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam between S18 and S2B. Jam in path R."
0000000
005A 300B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Jam at rear of BID. Jam between S23 and S51."
0000000
005A 400B_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: S76 shielded at transportation: it must not be shielded - media
0000000 may be remained or sensor is abnormal. *Detected by tray controller"
005A 8020_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Many BID other error 1"
0000000
005A 8021_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Many BID other error 2"
0000000
005A 8022_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Many BID other error 3"
0000000

332 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A 8023_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Many BID other error 4"
0000000
005A 8024_E ?0354 8000000000 000DI01:3D:33:35 "CASHOUT RM2: Many BID other error 5"
0000000

EBH Cash In (EBH/RM2) (Class: 005A_CIN)

The following table lists the MDS Status codes assigned to the Euro Bank Note
Handler class 005A_CIN. This class is set in case an error of the EBH module
has occurred in a cash in transaction.

Refer to section ”Error Class Mapping” on page 5.

Table 93: EBH Cash In (class: 005A_CIN)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
005A_CIN DEFA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: DEFAULT_ERROR"
005A_CIN DEFA_W A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: DEFAULT_WARNING"
005A_CIN 0001_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: 2nd byte of (CNTL) of command is undefined."
005A_CIN 0002_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: 0 or more than 100 in (Total) of (Stacking Limit Number of
Notes) or 0 after calculation of (Media 16)."
005A_CIN 0004_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Number of notes is over total number of stackable notes."
005A_CIN 0005_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Requested counts of bills was 0 or greater than 109."
005A_CIN 0006_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Define note configuration command, (LNG) of "Note config-
uration" is not correct."
005A_CIN 0007_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Define destination of deposit command, (LNG) of "Desti-
nation information" is not correct."
005A_CIN 0008_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Define destination of dispense command, (LNG) of "Desti-
nation information" is not correct."
005A_CIN 0009_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Define deposit function command, (LNG) of "Deposit
Function" is not correct."
005A_CIN 000A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Returning or storing is received when any note is not stacked
in temporary stack unit."
005A_CIN 000C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Define storing function command, (LNG) of "Storing
Function" is not correct."
005A_CIN 000D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: (LNG) of "Transaction Number" is not correct."
005A_CIN 000E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Define destinatin of deposit command, "Distination infor-
mation" is not correct."
005A_CIN 000F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Fix recognition result of BIM command, (LNG) of "Fix Data"
is not correct."
005A_CIN 0010_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Fix recognition result of BIM command, (Number) of "Fix
Data" was 0 or greater than 128."
005A_CIN 0011_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Fix recognition result of BIM command, (Category) of "Fix
Data" was 0 or greater than 4."
005A_CIN 0012_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Storing is received when cassettes are full or storable media is
not set for cassette."
005A_CIN 0013_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Dispense is received when rejection unit is full."
005A_CIN 0014_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Collecting is received when cassettes are full or storable media
is not set for cassette."
005A_CIN 0015_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Define destination of deposit command, ""Distination infor-
mation" is not possible to transport it."
005A_CIN 0017_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PDL transmitting command is received before PDL start
command reception of BID or a cassette control part."
005A_CIN 0019_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PDL command is received, when PDL function for tray
controller is not enabled."
005A_CIN 001A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Command data error. When the storing cassette was full, there
is no destination of the unfit note."

May 2011 333

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A_CIN 001B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Command data error. When the storing cassette was full, there
is no destination of the L3 note."
005A_CIN 001C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Command receiving timing abnormal. L2-Box is full."
005A_CIN 001D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Command receiving timing abnormal. Reject cassette is full
before deposit."
005A_CIN 001E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Command receiving timing abnormal. Transported cassette
not installed before deposit."
005A_CIN 0020_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Command excluding PDL command is received, when PID
processing for BID or tray controller is executed."
005A_CIN 0021_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Dispense is received, when the specified denomination lane is
suppressed."
005A_CIN 0022_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Dispense is received, when the specified denomination lane is
empty."
005A_CIN 002B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Dispense is received, when the specified denomination lane is
not set."
005A_CIN 002C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Dispense is received, when the denomination of the specified
lane is not set or the cassette is not set."
005A_CIN 0032_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Storable cassette is not installed."
005A_CIN 0035_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray is not installed."
005A_CIN 0036_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media is remained in cassette A."
005A_CIN 0037_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media is remained in cassette B."
005A_CIN 0038_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media is remained in cassette C."
005A_CIN 0039_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media is remained in cassette D."
005A_CIN 003A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media is remained in reject cassette."
005A_CIN 003B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media is remained in collection cassette."
005A_CIN 003D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Storable cassette is full."
005A_CIN 0040_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data in (ID) of additional packet is not correct, undefined. Or
data in (LNG) is not correct."
005A_CIN 0046_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Sense of operation detection test or end of operation detection
test is received without receiving of start of operation detection test."
005A_CIN 004A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Destination is not set in (Destination of Read / Write)."
005A_CIN 004B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Destination is not correct in (Destination of Read / Write)."
005A_CIN 004C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data is not set in (Data for Cassette ID)."
005A_CIN 004D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data is not correct in (Destination Information) in (Data for
Cassette ID)."
005A_CIN 004F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data is not set in (Set Data for Cassette Adjustment) or not
correct."
005A_CIN 0050_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data is not set in (Set Data of Adjustment Value for Upper
Unit) or not correct."
005A_CIN 0051_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data is not correct in (Set Data for Cassette Adjustment)."
005A_CIN 0053_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data is not correct in (Set Data of Adjustment Value for Upper
Unit)."
005A_CIN 0054_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data is not set in (Set Data for Cassette Application) or not
correct."
005A_CIN 0055_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data is not correct in (Set Data for Cassette Application)."
005A_CIN 0063_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Denomination information is not set."
005A_CIN 0064_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Destination information is not set."
005A_CIN 0065_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Destination information is not set."
005A_CIN 0066_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Deposit function is not set."
005A_CIN 0067_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Storing function is not set."
005A_CIN 0068_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Transaction number is not set."
005A_CIN 0069_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Transaction number is not set."
005A_CIN 006A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Transaction number is not set."
005A_CIN 006B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Transaction number is not set."
005A_CIN 006C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Transaction number is not set."
005A_CIN 006D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Transaction number is not set."
005A_CIN 006E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Transaction number is not set."
005A_CIN 006F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Transaction number is not set."
005A_CIN 0070_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data in (Log ID) ACT is not set or data in (LNG) is not
correct."
005A_CIN 0071_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data in (Stacking Limit Number of Notes) is not set or data in
(LNG) is not correct."
005A_CIN 0073_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: There was no requested number of bills to be dispensed, or the
data length LNG was incorrect."
005A_CIN 0074_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Transaction number is not set."
005A_CIN 0075_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data in (Time) is not set or data in (LNG) is not correct."
005A_CIN 0076_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Transaction number is not set."
005A_CIN 0077_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: BID command is not set."

334 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A_CIN 0078_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The transportation destinations of level 3 are not united by all
denominations."
005A_CIN 0079_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Fix data is not set."
005A_CIN 007A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Command data of define note configuration abnormal. The
data length of the packet was specified 258 bytes or more."
005A_CIN 007B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Command data of transmission of PDL data abnormal. The
data length of the packet was specified 994 bytes or more."
005A_CIN 007C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Command data of maintenance commands abnormal. The
packet of the data length in 258 bytes or more was specified."
005A_CIN 007D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Command data of set maximum number of retract box
abnormal. Maximum number is not set."
005A_CIN 007E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The specified command data of “Define Storing Function” was
abnormal."
005A_CIN 007F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The specified command data of "Define Skew Threshold" was
abnormal. The"
005A_CIN 0080_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data in (Current Date and Time) is abnormal or data in (LNG)
is not correct."
005A_CIN 0083_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Set data of the number of remaining bills was invalid, or the
data length LNG was incorrect."
005A_CIN 0084_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data in (Set of Abnormal Notes) is abnormal or data in (LNG)
is not correct."
005A_CIN 0086_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data in (Set of Numbers for Full/Near-full) is abnormal or data
in (LNG) is not correct."
005A_CIN 0087_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: BID command data in (LNG) is not correct."
005A_CIN 0088_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Storing media for overflow is not correct."
005A_CIN 0089_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Storing media for cartridge is not correct."
005A_CIN 008C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data in (Module Number) of (Set of Deposit Function) is
abnormal or data in (LNG) is not correct."
005A_CIN 008E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Set denomination for the cassette was invalid, or the data
length LNG was incorrect."
005A_CIN 008F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Duplicated data is set in (Cassette Denomination Setting) or
data in (LNG) is not correct."
005A_CIN 0090_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Length of whole command is not correct."
005A_CIN 0091_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data in (BCW) is not correct."
005A_CIN 0092_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: 1st byte of (CNTL) is undefined."
005A_CIN 0093_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data for (ID) in (CNTL) is not set."
005A_CIN 0094_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data in (LNG) of (CNTL) is not correct."
005A_CIN 0095_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Status sense or unexpected command is received after WDT-
out."
005A_CIN 0096_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Status sense or unexpected command is received after power-
down during execution."
005A_CIN 0097_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Status sense or unexpected command is received during
mechanical down."
005A_CIN 0098_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Status sense or unexpected command is received after
receiving of stop."
005A_CIN 0099_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Status sense or unexpected command is received after
detection of mechanical down."
005A_CIN 009A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It is mechanism operation command reception before data
write command reception."
005A_CIN 009D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data in [Kind of Safe Pass] is abnormal or Data in [LNG] is
not correct."
005A_CIN 009E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data in (Priority level of Dispense) is abnormal or data in
(LNG) is not correct."
005A_CIN 00A0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data in (ACT) of feed start command to tray controller is not
correct."
005A_CIN 00A1_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data in (ACT) of storing start command to tray controller is
not correct."
005A_CIN 00A2_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data in (ACT) of reset-conveyance command to tray
controller is not correct."
005A_CIN 00A3_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data in (ACT) of motor speed change command to tray
controller is not correct."
005A_CIN 00B0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Define destination of dispense command "Destination infor-
mation" is not correct."
005A_CIN 00B1_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Define deposit function command "Deposit Function" is not
correct."
005A_CIN 1001_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: I/O module: shutter closed, money in, a note stucks out of the
bundle."
005A_CIN 1002_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: I/O module: shutter cannot be opened."
005A_CIN 1003_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: I/O module: shutter should open but fork light sensor broken."
005A_CIN 1004_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: I/O module: shutter should open but fork light sensor broken."

May 2011 335

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A_CIN 1005_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Solenoid (SL14) or switch (SW19) abnormal. There is a possi-
bility broken."
005A_CIN 1006_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Shutter error. Switch (SW17=OFF, SW18=ON) abnormal "
005A_CIN 1007_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Shutter blocked during closing."
005A_CIN 1008_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Shutter blocked during opening."
005A_CIN 1009_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: I/O module: the inner upper tray does not reach the upper end
position."
005A_CIN 100D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: I/O module: shutter closed SW18 wrong."
005A_CIN 100E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: I/O module: shutter closed possible not locked, SW19 wrong."
005A_CIN 100F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: I/O module "
005A_CIN 1010_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: An abnormal rotation of the motor (DM11) was detected when
the note was dispensed from the outlet."
005A_CIN 1011_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: An abnormal rotation of the motor (DM18) was detected when
the note was dispensed from the outlet."
005A_CIN 1012_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: An abnormal rotation of the motor (DM18) was detected when
the note accumulated to the outlet."
005A_CIN 1013_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Dispensing at the outlet is abnormal."
005A_CIN 1014_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Dispensing at the outlet is abnormal."
005A_CIN 1015_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Dispensing at the outlet is abnormal. (The stop interrupt of the
motor doesn`t enter while the motor is stopping. The motor cannot stop.)"
005A_CIN 1016_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Dispensing at the outlet is abnormal (during dispensing jam at
S2B)."
005A_CIN 1017_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Dispensing at the outlet is abnormal (during dispensing jam at
S2B)."
005A_CIN 1031_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
005A_CIN 1032_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit.DM31
stopped because of detection of SW39 ON."
005A_CIN 1033_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit. DM31
stopped because of detection of SW3A ON."
005A_CIN 1034_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
005A_CIN 1035_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
005A_CIN 1036_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal at temporary stack unit, DM31
ON, but SW3A not ON."
005A_CIN 1037_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
005A_CIN 1038_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit. DM31
ON, but SW39 not lighted."
005A_CIN 1039_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Pressure Mechanism at Escrow Unit is abnormal (DM31 ON,
but SW3A not lighted)"
005A_CIN 103A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
005A_CIN 103B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
005A_CIN 103C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
005A_CIN 103D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: DM32 is tried to rotate for reverse direction at position of
shelter, but not rotated."
005A_CIN 103E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: DM32 is tried to rotate for reverse direction at position of
dispensing, but not rotated."
005A_CIN 103F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: DM32 is tried to rotate for reverse direction after no-
dispensing, but not rotated."
005A_CIN 1049_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: DM40 not stopped at high-speed rotation or low-speed
rotation."
005A_CIN 104A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Speed not arrived to 70% of standard-speed after rotation,
retries failed."
005A_CIN 104B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Speed not arrived to 70% of standard-speed after rotation,
retries failed."
005A_CIN 104C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Speed dropped down at high-speed rotation or low-speed
rotation."
005A_CIN 104D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Speed too fast based on standard-speed at rotation of high-
speed or low-speed."
005A_CIN 104E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Speed too slow based on standard-speed at rotation of high-
speed or low-speed."
005A_CIN 104F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Speed not arrived to 70% of standard-speed after rotation at
reset transportation, retries failed."
005A_CIN 107D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: DM32 is tried to rotate for normal direction, but not rotated -
DM32 may be locked."
005A_CIN 107E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rotation of DM32 can not be checked at normal rotation -
DM32 may be locked."
005A_CIN 107F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: DM32 not stopped by stop indication - DM32 may be locked."
005A_CIN 10A0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Cassette: motor inside cassette A does not turn. It is tried to
start the motor (DMA2) while conveying."
005A_CIN 10A1_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Cassette: motor inside cassette B does not turn. It is tried to
start the motor (DMB2) while conveying."

336 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A_CIN 10A2_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Cassette: motor inside cassette C does not turn. It is tried to
start the motor (DMC2) while conveying."
005A_CIN 10A3_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Cassette: motor inside cassette D does not turn. It is tried to
start the motor (DMD2) while conveying."
005A_CIN 10AE_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The interrupt of a hard timer did not enter, while cash-out from
cassette A."
005A_CIN 10AF_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It is tried to start the motor (DMA2) while conveying, but it
didn't run."
005A_CIN 10BE_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The interrupt of a hard timer did not enter, while cash-out from
cassette B."
005A_CIN 10BF_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It is tried to start the motor (DMB2) while conveying, but it
didn't run."
005A_CIN 10CE_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The interrupt of a hard timer did not enter, while cash-out from
cassette C."
005A_CIN 10CF_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It is tried to start the motor (DMC2) while conveying, but it
didn't run."
005A_CIN 10DE_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The interrupt of a hard timer did not enter, while cash-out from
cassette D."
005A_CIN 10DF_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It is tried to start the motor (DMD2) while conveying, but it
didn't run."
005A_CIN 10E0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
generated according to illegal timing of watch timer event."
005A_CIN 10E1_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
generated according to illegal timing of SW11 ON or OFF event."
005A_CIN 10E2_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
generated according to illegal timing of SW13 ON or OFF event."
005A_CIN 10E3_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
generated according to illegal timing of SW17 ON or OFF event."
005A_CIN 10E4_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
generated according to illegal timing of SW18 ON or OFF event."
005A_CIN 10E5_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
generated according to illegal timing of SW19 ON or OFF event."
005A_CIN 10E7_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
generated according to illegal timing of SW11 watch time-up event."
005A_CIN 10E8_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
generated according to illegal timing of SW13 watch time-up event."
005A_CIN 10EA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
generated according to illegal timing of low-pressure plate watch time-up event."
005A_CIN 10EB_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
generated according to illegal timing of up-pressure plate watch time-up event."
005A_CIN 10EC_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
generated according to illegal timing of PM12 stop event."
005A_CIN 10ED_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled, It is
generated according to illegal timing of PM19 stop event."
005A_CIN 10EE_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: While in the pressure plate in IN/OUT module controlled, it is
generated according to illegal timing of SW11 and SW13 watch time-up event."
005A_CIN 10EF_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: While in the pressure plate in IN/OUT module controlled, it is
generated according to illegal timing of Feed Moter phase watch time-up event."
005A_CIN 10F0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: While in the pressure plate in IN/OUT module controled, after
PM12 stops, SW11: as turning on."
005A_CIN 2010_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: DM11 rotated for normal direction, but S16 and S1A both not
shielded - No-dispensing detected for five times."
005A_CIN 2020_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: DM18 rotated for normal direction, but S2B not shielded - No-
dispensing detected for five times."
005A_CIN 2030_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: DM32 rotated for normal direction, but S33 and S34 both not
shielded -"
005A_CIN 20A0_E A700000 :4000 000DP01:3F:31p37 "CASHOUT RM2: Note jam during dispensing in Cassette A."
005A_CIN 20A2_E A700000 :4000 000DP01:3F:31p37 "CASHOUT RM2: Running out of notes in Cassette A."
005A_CIN 20B0_E A700000 :4000 000DP01:3F:31p37 "CASHOUT RM2: Note jam during dispensing in Cassette B."
005A_CIN 20B2_E A700000 :4000 000DP01:3F:31p37 "CASHOUT RM2: Running out of notes in cassette B."
005A_CIN 20C0_E A700000 :4000 000DP01:3F:31p37 "CASHOUT RM2: Note jam during dispensing in Cassette C."
005A_CIN 20C2_E A700000 :4000 000DP01:3F:31p37 "CASHOUT RM2: Running out of notes in cassette C."
005A_CIN 20D0_E A700000 :4000 000DP01:3F:31p37 "CASHOUT RM2: Note jam during dispensing in Cassette D."
005A_CIN 20D2_E A700000 :4000 000DP01:3F:31p37 "CASHOUT RM2: Running out of notes in cassette D."
005A_CIN 3001_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH down, because length between two notes is too short at
S51. Two notes run into each other, this could happen during cash-in to ESCROW"
005A_CIN 3002_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH down, because length between two notes is too short at
S52. The notes could be slowed down at ESCROW deflector FL2."
005A_CIN 3003_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH down, because length between two Notes is too short at
S44."

May 2011 337

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A_CIN 3016_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Sensor shielded more than predefined time Jam at S16 or S1A.
Jam at dispenser slot lower inner tray of I/O module."
005A_CIN 3018_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Sensor shielded more than predefined time Jam at S18."
005A_CIN 301A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S16 / S1A and S18. Jam at dispenser slot lower
inner tray of I/O module and path R."
005A_CIN 3023_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Sensor shielded more than predefined time jam at S23. Jam at
input slot of BEB reader."
005A_CIN 3027_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S44 and S2B. Jam in path F and or centralization
station."
005A_CIN 3028_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Jam between S18 and S23. Jam between path R and BEB
reader."
005A_CIN 302A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S68 and S23. Jam in path R."
005A_CIN 302B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Sensor shielded more than predefined time. Jam at S2B. Jam
in I/O module at dispensing slot inner upper tray."
005A_CIN 302C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at rear of returning stack unit. Jam between S44 and S23.
Jam in path F and or centralization station."
005A_CIN 302D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S68 and S23. Jam in path R."
005A_CIN 302E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S65/S66/S67 and S2B. Jam in path F, just before
input slot upper inner tray of I/O module."
005A_CIN 302F_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Jam between path unit (F) and BID unit. Jam between S60 and
S23. Jam in path R between cash-out slot of safe and BEB reader."
005A_CIN 3033_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at S33 or S34. Jam inside of the ESCROW."
005A_CIN 303A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at rear of temporary stack unit. Jam between S33/S34 and
S53. Jam inside of the ESCROW at the dispensing slot."
005A_CIN 3044_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at of returning stack unit. Jam at S44. Jam in path F."
005A_CIN 3045_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at S45. Jam in path F."
005A_CIN 3047_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam in path F under the ESCROW. Jam between S52 and S44."
005A_CIN 304A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at rear of Outlet Jam between S45 and S18. Jam in path
R."
005A_CIN 304B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at front of returning stack unit. Jam between S52 and S44.
Jam in path F."
005A_CIN 304E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at rear temporary stack unit. Jam between S53 and S44.
Jam in path F, especially under the ESCROW."
005A_CIN 304F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at rear temporary stack unit. Jam between S51 and S44.
Jam in path F."
005A_CIN 3050_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at S50. Jam in input slot of ESCROW."
005A_CIN 3051_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at S51. Jam in path F at ESCROW output slot."
005A_CIN 3052_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at S52. Jam in path F at ESCROW output slot."
005A_CIN 3053_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at S53. Jam in path F at ESCROW output slot."
005A_CIN 3054_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at S54. Jam at safe input transport."
005A_CIN 3055_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at S55 Sensor shielded more than predefined time. Jam at
entrance of L2 box."
005A_CIN 3058_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S51 and S55."
005A_CIN 3059_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S54 and S70. Jam within the rear safe transport
(cash-in to safe)."
005A_CIN 305A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at front of temporary Stack Unit Jam between S52 and
S50. Jam in path F right in front of ESCROW."
005A_CIN 305B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S23 and S51."
005A_CIN 305C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at rear of temporary stack unit. Jam between S53 and
S52."
005A_CIN 305D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at rear of BID. Jam between S51 and S52."
005A_CIN 305E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at rear of BID. Jam between S23 and S52."
005A_CIN 305F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at path unit(R) in front of the entrance of flat path. Jam
between S51 and S54."
005A_CIN 3060_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at S60. Jam at safe transport (cash-out from safe) under I/
O module."
005A_CIN 3062_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at the entrance of cassette A. Jam at SA0. Exceeding
stipulated time, SA0 had turned ON."
005A_CIN 3063_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at the entrance of cassette B. Jam at SB0. Exceeding stipu-
lated time, SB0 had turned ON."
005A_CIN 3064_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at the entrance of cassette C. Jam at SC0. Exceeding stipu-
lated time, SC0 had turned ON."
005A_CIN 3065_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at S65,S66 or S67. Sensor shielded more than predefined
time. Jam at path F near I/O module."
005A_CIN 3067_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at the entrance of cssette ID. Jam at SD0. Exceeding stipu-
lated time, SD0 had turned ON."
005A_CIN 3068_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at S68. Sensor shielded more than predefined time. Jam at
path F near I/O module."
005A_CIN 306B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between the exit of flat path and the entrance of path unit
(F). Jam between S79 and S60."

338 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A_CIN 306E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S44 and S65/S66/S67. Jam in path F."
005A_CIN 306F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Half-size media is remained between S16 / S1A and S65 / S66
/ S67. Half of a note stucking between dispensing slot (cash-in, lower inner tray in
I/O module)"
005A_CIN 3070_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at S70. Sensor shielded more than predefined time.
*Detected by tray controller."
005A_CIN 3071_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at S71. Sensor shielded more than predefined time.
*Detected by tray controller"
005A_CIN 3072_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at S72. Sensor shielded more than predefined time.
*Detected by tray controller "
005A_CIN 3073_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at S73. Sensor shielded more than predefined time.
*Detected by tray controller"
005A_CIN 3074_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at S74. Sensor shielded more than predefined time.
*Detected by tray controller"
005A_CIN 3075_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at S75. Sensor shielded more than predefined time.
*Detected by tray controller"
005A_CIN 3076_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at S76. Sensor shielded more than predefined time.
*Detected by tray controller"
005A_CIN 3077_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at S77. Sensor shielded more than predefined time.
*Detected by tray controller"
005A_CIN 3078_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at S78. Sensor shielded more than predefined time.
*Detected by tray controller"
005A_CIN 3079_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at S79. Sensor shielded more than predefined time.
*Detected by tray controller"
005A_CIN 307A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S71 and S73 or jam between S72 and S73.
*Detected by tray controller"
005A_CIN 307B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S73 and S75 or jam between S74 and S75.
*Detected by tray controller"
005A_CIN 307C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S75 and S77 or jam between S76 and S77.
*Detected by tray controller"
005A_CIN 307D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S77 and S79 or jam between S78 and S79.
*Detected by tray controller"
005A_CIN 307E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S51 and S70. *Detected by tray controller "
005A_CIN 3080_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at SY1. Sensor shielded more than predefined time.
*Detected by tray controller"
005A_CIN 3081_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at SY0. Sensor shielded more than predefined time.
*Detected by tray controller"
005A_CIN 3086_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S75 and S76. *Detected by tray controller."
005A_CIN 3087_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S75 and S77. *Detected by tray controller "
005A_CIN 3088_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S77 and S78. *Detected by tray controller."
005A_CIN 3089_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S77 and S79. *Detected by tray controller "
005A_CIN 308A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S70 and SY1. *Detected by tray controller "
005A_CIN 308B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S70 and S71. *Detected by tray controller "
005A_CIN 308C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S71 and S72. *Detected by tray controller "
005A_CIN 308D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S71 and S73. *Detected by tray controller "
005A_CIN 308E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S73 and S74. *Detected by tray controller "
005A_CIN 308F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S73 and S74. *Detected by tray controller "
005A_CIN 3090_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S70 and SY0. *Detected by tray controller "
005A_CIN 30A1_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Handling of notes slow after BID length between two notes is
too short at S51. *Detected by tray controller"
005A_CIN 30A3_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Handling of notes slow before FL5 length between two notes
is too short at S70 *Detected by tray controller"
005A_CIN 30A4_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Handling of notes slow before FL6 length between two notes
is too short at S71 *Detected by tray controller"
005A_CIN 30A5_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Handling of notes slow before FL7 length between two notes
is too short at S72 *Detected by tray controller"
005A_CIN 30A6_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Length between two notes is too short at S73. Handling of
notes slow before FL8."
005A_CIN 4016_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S16 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal."
005A_CIN 4018_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S18 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal."
005A_CIN 401A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S1A shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal."
005A_CIN 4023_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S23 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal."
005A_CIN 402B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S2B shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal."
005A_CIN 402C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: FL3 returned to home position, but S65, S66, S67 shielded."
005A_CIN 402D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: FL3 returned to opposite position, but S23 shielded."

May 2011 339

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A_CIN 4033_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S33 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal."
005A_CIN 4034_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S34 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal."
005A_CIN 4044_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S44 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal."
005A_CIN 4045_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S45 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal."
005A_CIN 404C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: FL2 returned to opposite position, but S44 shielded."
005A_CIN 4050_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S50 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal."
005A_CIN 4051_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S51 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal."
005A_CIN 4052_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S52 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal."
005A_CIN 4053_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S53 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal."
005A_CIN 4054_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S54 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal."
005A_CIN 4055_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S55 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal."
005A_CIN 405A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: FL1 returned to opposite position, but S51 shielded."
005A_CIN 405B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: FL2 returned to home position, but S50 shielded."
005A_CIN 405C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: FL1 returned to home position, but S54 shielded."
005A_CIN 405D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: FL10 returned to home position, but S55 shielded."
005A_CIN 405E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: FL10 returned to opposite position, but S54 shielded."
005A_CIN 4060_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S60 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal."
005A_CIN 4065_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S65 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal."
005A_CIN 4066_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S66 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal."
005A_CIN 4067_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S67 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal."
005A_CIN 4068_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S68 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal."
005A_CIN 4070_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S70 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal."
005A_CIN 4071_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S71 shielded at transportation: it must not be shielded - media
may be remained or Sensor is abnormal. *Detected by tray controller"
005A_CIN 4072_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S72 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal. *Detected by tray controller"
005A_CIN 4073_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S73 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal. *Detected by tray controller"
005A_CIN 4074_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S74 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal. *Detected by tray controller"
005A_CIN 4075_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S75 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal. *Detected by tray controller"
005A_CIN 4076_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S76 unexpected shielded."
005A_CIN 4077_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S77 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal. *Detected by tray controller"
005A_CIN 4078_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S78 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal. *Detected by tray controller "
005A_CIN 4079_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S79 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal. *Detected by tray controller "
005A_CIN 407B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: FL4 returned to opposite position, but S70 shielded."
005A_CIN 4080_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SY1 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal. *Detected by tray controller"
005A_CIN 4081_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SY0 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal. *Detected by tray controller "
005A_CIN 408B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: FL11 returned to opposite position, but S70 shielded."
005A_CIN 5004_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Note remained in outlet S2C shielded."
005A_CIN 5005_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Note remained in outlet S1A shielded."
005A_CIN 5006_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Note remained in outlet S2D shielded."
005A_CIN 500C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Note remained in outlet S2C shielded."
005A_CIN 5010_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S10 shielded "
005A_CIN 5012_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S12 shielded "
005A_CIN 5014_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S14 shielded"
005A_CIN 5015_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S15 shielded"

340 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A_CIN 5016_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S16 shielded "
005A_CIN 5018_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S18 shielded "
005A_CIN 501C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: One of S10 - S14 shielded before transportation."
005A_CIN 501D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Wrinkled note remained in outlet."
005A_CIN 501E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: One of S10 - S15 shielded."
005A_CIN 501F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Bucket or pressure plate not set at position of insertion at status
sense (idling sense) or sense of insertion/taking-out."
005A_CIN 5023_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S23 shielded "
005A_CIN 5028_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SW18 lighted shutter has not closed."
005A_CIN 5029_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SW19 shielded shutter has not closed."
005A_CIN 502A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SW17 shielded shutter has not closed."
005A_CIN 502B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S2B shielded "
005A_CIN 5033_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S33 shielded"
005A_CIN 5034_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S34 shielded"
005A_CIN 5035_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S35 Shielded"
005A_CIN 5038_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes remained in temporary stack Unit before transportation.
One of S30 - S32"
005A_CIN 503A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes can not be collected, because some part of notes are
already out of temporary stack unit."
005A_CIN 503E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: One of S30 - S32 shielded"
005A_CIN 5040_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S40 shielded"
005A_CIN 5044_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S44 shielded "
005A_CIN 5045_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S45 shielded "
005A_CIN 5046_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S46 shielded"
005A_CIN 5048_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Returning Stack Unit tilted SW48 lighted."
005A_CIN 5049_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SW49 lighted"
005A_CIN 504A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S49 shielded"
005A_CIN 504C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S4C shielded"
005A_CIN 504E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: One of S1B,S1D,S1F,S2A shielded."
005A_CIN 5050_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S50 shielded "
005A_CIN 5051_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S51 shielded "
005A_CIN 5052_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S52 shielded "
005A_CIN 5053_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S53 shielded"
005A_CIN 5054_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S54 shielded "
005A_CIN 5055_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S55 shielded "
005A_CIN 5056_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S56 shielded "
005A_CIN 5058_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SW58 lighted"
005A_CIN 5059_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SW59 shielded"
005A_CIN 505C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SW5C shielded"
005A_CIN 505F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Signal of PLSW (safety switch) between head unit and safe
unit might be cut."
005A_CIN 5060_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S60 shielded "
005A_CIN 5065_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S65 shielded "
005A_CIN 5066_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S66 shielded "
005A_CIN 5067_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S67 shielded "
005A_CIN 5068_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S68 shielded "
005A_CIN 506F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Pass(F) tilted (SW49 lighted) "
005A_CIN 5070_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S70 shielded "
005A_CIN 5071_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S71 shielded "
005A_CIN 5072_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S72 shielded "
005A_CIN 5073_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S73 shielded."
005A_CIN 5074_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S74 shielded "
005A_CIN 5075_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S75 shielded "
005A_CIN 5076_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S76 shielded "
005A_CIN 5077_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S77 shielded "
005A_CIN 5078_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S78 shielded "
005A_CIN 5079_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S79 shielded "
005A_CIN 5080_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SY0 shielded "
005A_CIN 5081_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SY1 shielded "
005A_CIN 5082_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SY2 shielded "
005A_CIN 508F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Cassette not installed or IrDA abnormal."
005A_CIN 5090_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Retract Cassette not installed."
005A_CIN 509A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SW9A lighted "
005A_CIN 509B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SW9B lighted "
005A_CIN 509C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SW9C lighted "

May 2011 341

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A_CIN 50A0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Both SA0 and SA1 shielded."
005A_CIN 50AA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media may be remained in cassette A or sensor is abnormal.
*Detected by tray controller"
005A_CIN 50AC_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media may be remained in cassette A or sensor is abnormal.
*Detected by tray controller"
005A_CIN 50AE_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: If cassette is empty, SA4 or SWAE may be abnormal."
005A_CIN 50B0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Both SB0 and SB1 shielded "
005A_CIN 50BA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media may be remained in cassette B or sensor is abnormal.
*Detected by tray controller"
005A_CIN 50BC_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media may be remained in cassette B or sensor is abnormal.
*Detected by tray controller"
005A_CIN 50BE_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: If cassette is empty, SB4 or SWBE may be abnormal."
005A_CIN 50C0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Both SC0 and SC1 shielded."
005A_CIN 50CA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media may be remained in cassette C or sensor is abnormal.
*Detected by tray controller"
005A_CIN 50CC_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media may be remained in cassette C or sensor is abnormal.
*Detected by tray controller"
005A_CIN 50CE_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: If cassette is empty, SC4 or SWCE may be abnormal."
005A_CIN 50D0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Both SD0 and SD1 shielded."
005A_CIN 50DA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media may be remained in cassette D or sensor is abnormal.
*Detected by tray controller"
005A_CIN 50DC_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media may be left in place in cassette D or sensor SWDC is
abnormal."
005A_CIN 50DE_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: If cassette is empty, SD4 or SWDE may be abnormal."
005A_CIN 50E0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SE0 shielded "
005A_CIN 50EA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media may be remained in reject cassette or sensor is
abnormal. *Detected by tray controller"
005A_CIN 50EC_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media may be remained in reject cassette or sensor is
abnormal. *Detected by tray controller"
005A_CIN 50F1_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SWAE lighted"
005A_CIN 50F2_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SWBE lighted"
005A_CIN 50F3_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SWCE lighted"
005A_CIN 50F4_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SWDE lighted"
005A_CIN 50FD_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SY0 shielded. Jam in front of reject cassette."
005A_CIN 50FE_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SY1 shielded "
005A_CIN 50FF_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: A command was received while the indicator was ON so that
the tray can be pulled out, or while accessing the Tray Sensor SW9E, reading the
cassette's"
005A_CIN 6003_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S14 not lighted at lighting/shielding for sensor level during
automatic adjustment."
005A_CIN 6004_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S15 not lighted at lighting/shielding for sensor level during
automatic adjustment."
005A_CIN 6007_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S1F not lighted at lighting/shielding for sensor level during
automatic adjustment."
005A_CIN 6008_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S2A not lighted at lighting/shielding for sensor level during
automatic adjustment."
005A_CIN 6009_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S2C not lighted at lighting/shielding for sensor level during
automatic adjustment."
005A_CIN 600A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S2D not lighted at lighting/shielding for sensor level during
automatic adjustment."
005A_CIN 600B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S2E not lighted at lighting/shielding for sensor level during
automatic adjustment."
005A_CIN 6020_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: FRU device data of cassette A is abnormal."
005A_CIN 6021_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: FRU device data of cassette B is abnormal."
005A_CIN 6022_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: FRU device data of cassette C is abnormal."
005A_CIN 6023_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: FRU device data of cassette D is abnormal."
005A_CIN 6024_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: FRU device data of rejection unit is abnormal."
005A_CIN 6026_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Automatic adjustment for one of S10 - S16 not completed -
detected at Power ON."
005A_CIN 6027_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Automatic adjustment for DM11 not completed - detected at
Power ON."
005A_CIN 602A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SUM check abnormal for FRU device. Mapping data
abnormal or mapping not executed."
005A_CIN 602B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SUM check abnormal for FRU device. Mapping data
abnormal or mapping not executed."
005A_CIN 602C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SUM check abnormal for FRU device. Mapping data
abnormal or mapping not executed."
005A_CIN 602D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SUM check abnormal for FRU device. Mapping data
abnormal or mapping not executed."

342 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A_CIN 602E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SUM check abnormal for FRU device. Mapping data
abnormal or mapping not executed."
005A_CIN 602F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Cassette ID or SUM of denomination information abnormal."
005A_CIN 6030_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SW38 not shielded at rotation of PM30 - SW38 broken or
PM30 abnormal."
005A_CIN 6031_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SW38 not lighted at rotation of PM30 - SW38 broken or PM30
abnormal."
005A_CIN 6032_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2:
EBH_EXT_ESCROW_PM30_SPEED_NOT_COMPLETED"
005A_CIN 6033_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Speed of PM30 not completed slow down or fast up - case 2."
005A_CIN 6037_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S30 not lighted at lighting/shielding for sensor level during
automatic adjustment."
005A_CIN 6038_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S31 not lighted at lighting/shielding for sensor level during
automatic adjustment."
005A_CIN 6039_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S32 not lighted at lighting/shielding for sensor level during
automatic adjustment."
005A_CIN 603A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: DM32 not rotated at low-speed rotation or rotated too fast for
predefined speed."
005A_CIN 603B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: DM32 not rotated for predefined speed."
005A_CIN 603C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: DM32 not stopped by stop indication."
005A_CIN 603D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Automatic adjustment of DM32 executed, but speed too fast
for predefined or adjustment invalid."
005A_CIN 603E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Automatic adjustment of DM32 executed, but speed too slow
for predefined or adjustment invalid."
005A_CIN 603F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: DM32 ON, but motor not rotated - DM32 locked."
005A_CIN 604F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: DM40 ON, but Motor not rotated."
005A_CIN 6060_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Timed-up before completion of speed-up/down for PM30."
005A_CIN 6061_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S35 shielded after completion of dispensing."
005A_CIN 6080_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SWEB and SWEC both ON, one of switches broken."
005A_CIN 6081_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SWE9 and SWEA both not ON, but SWEA ON, one of
switches broken."
005A_CIN 6082_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal at reject cassette. PME1=ON,
but SWEC=OFF."
005A_CIN 6083_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PME1 ON, but SWE9 still ON."
005A_CIN 6084_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PME1 ON, but SWEB still ON."
005A_CIN 6085_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH_EXT_CASSETTE_SWEC"
005A_CIN 6086_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PME1 ON, and SWEC not ON, but SWE9 ON. *Detected by
tray controller"
005A_CIN 6087_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: DME2 ON, but not rotated."
005A_CIN 6088_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Althougth it is full, SWEA did not turn OFF even one time"
005A_CIN 6089_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PME1 time-out."
005A_CIN 608A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SE0 ON."
005A_CIN 608B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=ON SWEB OFF
SWEA OFF SWE9 ON)."
005A_CIN 608C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=OFF SWEB ON
SWEA OFF SWE9 OFF)."
005A_CIN 6090_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SUM Check abnormal for FRU Device. Mapping data
abnormal or mapping not executed."
005A_CIN 6091_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data written into FRU Device of Base Unit, but Data not same
after Read "
005A_CIN 6092_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data not written during predefined time - FRU broken or
Wiring abnormal "
005A_CIN 6095_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PLSW OFF. One interlock switch open."
005A_CIN 6096_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Pin installed for WDT. Jumper on mainboard installed for
debugging, should be off."
005A_CIN 6097_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: IOP not cut for tray controller. Problem in safe, power off for
motors."
005A_CIN 6098_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: IOP not cut for EBH Controller. Problem in mainunit, power
off for motors."
005A_CIN 6099_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: BID can not be initialized."
005A_CIN 609A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: IOPTH is not OFF for tray controller. Tray contoller switches
off mainboard due to a problem."
005A_CIN 609B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: IOPis not OFF for EBH controller. Mainboard switches off
tray controller due to a problem."
005A_CIN 609C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Metal detection can not be initialized, Change I/O module."
005A_CIN 60A0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SWAB and SWAC both ON ,one of switches broken."
005A_CIN 60A1_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SWA9 and SWAA both not ON, but SWAA ON, one of
switches broken."
005A_CIN 60A2_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMA1 ON, but SWAC not ON."

May 2011 343

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A_CIN 60A3_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMA1 ON, but SWA9 still ON. *Detected by tray controller "
005A_CIN 60A4_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMA1 ON, but SWA9 still ON."
005A_CIN 60A5_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMA1 ON, but SWAC not ON."
005A_CIN 60A6_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMA1 ON, and SWAC not ON, but SWA9 ON."
005A_CIN 60A7_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: DMA2 ON, but not rotated, Detected by tray controller, and
detected by EBH controller during diagnostic test."
005A_CIN 60A8_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Althougth it is full, SWAA did not turn OFF even one time."
005A_CIN 60A9_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMB1 time-out, detected by tray controller."
005A_CIN 60AA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SB0 ON. *Detected by tray controller"
005A_CIN 60AB_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=ON SWEB OFF
SWEA OFF SWE9 ON)."
005A_CIN 60AC_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=OFF SWEB ON
SWEA OFF SWE9 OFF."
005A_CIN 60B0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SWBB and SWBC both ON."
005A_CIN 60B1_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SWB9 and SWBA both not ON, but SWBA ON, one of
switches broken."
005A_CIN 60B2_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMB1 ON, but SWBC not ON."
005A_CIN 60B3_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMB1 ON, but SWB9 still ON."
005A_CIN 60B4_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMB1 ON, but SWBB still ON."
005A_CIN 60B5_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMB1 ON, but SWBC not ON."
005A_CIN 60B6_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMB1 ON, and SWBC not ON, but SWB9 ON."
005A_CIN 60B7_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: DMB2 ON, but not rotated."
005A_CIN 60B8_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Althougth it is full, SWBB did not turn OFF even one time."
005A_CIN 60B9_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMB1 time-out."
005A_CIN 60BA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SB0 ON."
005A_CIN 60BB_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The state of the sensor is contradicted (SWEC=ON SWEB
OFF SWEA OFF SWE9 ON)"
005A_CIN 60BC_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=OFF SWEB ON
SWEA OFF SWE9 OFF)"
005A_CIN 60C0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SWCB and SWCC both ON - one of switches broken."
005A_CIN 60C1_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SWC9 and SWCA both not ON, but SWCA ON, one of
switches broken."
005A_CIN 60C2_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMC1 ON, but SWCC not ON."
005A_CIN 60C3_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMC1 ON, but SWC9 still ON."
005A_CIN 60C4_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMC1 ON, but SWCB still ON."
005A_CIN 60C5_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMC1 ON, but SWCC not ON"
005A_CIN 60C6_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMC1 ON, and SWCC not ON, but SWC9 ON."
005A_CIN 60C7_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: DMC2 ON, but not rotated."
005A_CIN 60C8_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Althougth it is full, SWCC did not turn OFF even one time."
005A_CIN 60C9_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMC1 time-out."
005A_CIN 60CA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SC0 ON."
005A_CIN 60CB_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=ON SWEB OFF
SWEA OFF SWE9 ON)."
005A_CIN 60CC_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=OFF SWEB ON
SWEA OFF SWE9 OFF)"
005A_CIN 60D0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SWDB and SWDC both ON, one of switches broken."
005A_CIN 60D1_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SWD9 and SWDA both not ON, but SWDA ON, one of
switches broken."
005A_CIN 60D2_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMD1 ON, but SWDC not ON."
005A_CIN 60D3_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMD1 ON, but SWD9 still ON."
005A_CIN 60D4_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMD1 ON, but SWDB still ON."
005A_CIN 60D5_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMD1 ON, but SWDC not ON."
005A_CIN 60D6_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMD1 ON, and SWDC not ON, but SWC9 ON."
005A_CIN 60D7_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: DMD2 ON, but not rotated."
005A_CIN 60D8_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Althougth it is full, SWDD did not turn OFF even one time."
005A_CIN 60D9_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: PMD1 time-out."
005A_CIN 60DA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SD0 ON."
005A_CIN 60DB_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The stat of the sensor is contradicted (SWEC=OFF SWEB ON
SWEA OFF SWE9 OFF)."
005A_CIN 60DC_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Inconsistent sensor status (SWD9=OFF SWDB=ON
SWDC=OFF SWDA=OFF)."
005A_CIN 60E0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media indication abnormal for cassette A."
005A_CIN 60E1_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media indication abnormal for cassette B."
005A_CIN 60E2_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media indication abnormal for cassette C."
005A_CIN 60E3_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media indication abnormal for cassette D."
005A_CIN 60E5_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media indication abnormal for reject cassette."
005A_CIN 60E7_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Adjustment value set out of range for store unit F."

344 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A_CIN 60E8_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Denomination information abnormal for reject cassette."
005A_CIN 60E9_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rotation mechanism abnormal: at the reject cassette."
005A_CIN 60ED_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media indication abnormal for collection cassette."
005A_CIN 60F0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S35 not lighted at lighting/shielding for sensor level during
automatic adjustment."
005A_CIN 60F1_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Adjustment values not correct for outlet, temporary stack unit
and returning stack unit."
005A_CIN 60F2_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Adjustment values not set out of range for outlet, temporary
stack unit and returning stack unit."
005A_CIN 60F7_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Adjustment value set out of range for store unit A."
005A_CIN 60F8_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Adjustment value set out of range for store unit B."
005A_CIN 60F9_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Adjustment value set out of range for store unit C."
005A_CIN 60FA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Adjustment value set out of range for store unit D."
005A_CIN 60FB_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Denomination information abnormal for Ccssette A."
005A_CIN 60FC_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Denomination information abnormal for cassette B."
005A_CIN 60FD_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Denomination information abnormal for cassette C."
005A_CIN 60FE_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Denomination information abnormal for cassette D."
005A_CIN 60FF_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Serial no. of production duplicated."
005A_CIN 7010_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S10 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7012_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S12 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7014_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S14 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7015_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S15 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7016_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S16 abnormal. Power OFF, but sensor still lighted."
005A_CIN 701A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S1A abnormal. Power OFF, but sensor still lighted."
005A_CIN 701B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S1B abnormal. Power OFF, but sensor still lighted."
005A_CIN 701D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S1D abnormal. Power OFF, but sensor still lighted."
005A_CIN 701F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S1F abnormal. Power OFF, but sensor still lighted."
005A_CIN 7023_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S23 abnormal. Power OFF, but sensor still lighted."
005A_CIN 702A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S2A abnormal. Power OFF, but sensor still lighted."
005A_CIN 702B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S2B abnormal. Power OFF, but sensor still lighted."
005A_CIN 702C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S2C abnormal. Power OFF, but sensor still lighted."
005A_CIN 702D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S2D abnormal. Power OFF, but sensor still lighted."
005A_CIN 702E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S2E abnormal. Power OFF, but sensor still lighted."
005A_CIN 7030_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S30 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7031_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S31 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7032_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S32 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7033_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S33 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7034_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S34 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7035_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S35 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7044_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S44 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7045_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S45 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7050_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S50 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7051_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S51 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7052_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S52 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7053_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S53 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7054_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S54 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7055_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S55 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7056_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S56 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7060_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S60 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7065_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S65 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7066_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S66 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7067_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S67 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7068_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S68 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7070_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S70 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7071_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S71 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7072_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S72 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7073_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S73 abnormal. Power OFF, but sensor still."
005A_CIN 7074_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S74 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7075_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S75 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7076_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S76 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7077_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S77 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7078_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S78 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7079_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S79 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7080_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S80 abnormal. Power OFF, but sensor still lighted."
005A_CIN 7081_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S81 abnormal. Power OFF, but sensor still lighted."

May 2011 345

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A_CIN 7082_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S82 abnormal. Power OFF, but sensor still lighted."
005A_CIN 8010_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: No-dispensing, foreign material, skew-dispensing, dispensing
of some part of note or locking is detected 5 times by a command and finally no-
dispensing,"
005A_CIN 8012_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: More than 2 check sheets dispensed at transportation way.
Check or chained-dispensing, together-dispensing or half-folded dispensing
detected."
005A_CIN 8013_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: No-dispensing, foreign material, skew-dispensing, dispensing
of some part of note or locking is detected 5 times by a command and finally
foreign material"
005A_CIN 8014_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: No-dispensing, foreign material, skew-dispensing, dispensing
of some part of note or locking is detected 5 times by a command and finally
dispensing is"
005A_CIN 8015_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: No-dispensing, foreign material, skew-dispensing, dispensing
of some part of note or locking is detected 5 times by a command and finally
locking detected"
005A_CIN 8025_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Many BID other error."
005A_CIN 8026_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Many BID identification impossible error. BEB $040 - 42 "
005A_CIN 8030_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Transport locked, note locking is detected 5 times by a
command."
005A_CIN 8031_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Transport locked, note locking is detected 5 times by a
command."
005A_CIN 8090_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Running out of notes or picking no notes."
005A_CIN 80A0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Picking error retries exceeded in the cassette."
005A_CIN 80A5_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Picking error reties exceeded in cassette A, picking was
locked."
005A_CIN 80A6_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette A."
005A_CIN 80A7_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette A."
005A_CIN 80A8_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette A."
005A_CIN 80A9_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette A."
005A_CIN 80AA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette A."
005A_CIN 80AB_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette A."
005A_CIN 80AC_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette A."
005A_CIN 80AD_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette A."
005A_CIN 80B0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Picking error retries, Exceeded in the cassette B."
005A_CIN 80B5_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Picking error reties, Exceeded in the cassette B, picking was
locked."
005A_CIN 80B6_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette B."
005A_CIN 80B7_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette B."
005A_CIN 80B8_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette B."
005A_CIN 80B9_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette A."
005A_CIN 80BA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette A."
005A_CIN 80BB_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette B."
005A_CIN 80BC_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette B."
005A_CIN 80BD_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette B."
005A_CIN 80C0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Picking error retries exceeded in the cassette C."
005A_CIN 80C5_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Picking error reties exceed in the cassette C, picking locked."
005A_CIN 80C6_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette C."
005A_CIN 80C7_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette C."
005A_CIN 80C8_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette C."
005A_CIN 80C9_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette C."

346 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A_CIN 80CA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette C."
005A_CIN 80CB_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette C."
005A_CIN 80CC_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette C."
005A_CIN 80CD_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette C."
005A_CIN 80D0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Picking error retries. Exceeded in the cassette D."
005A_CIN 80D5_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Picking error retries, exceeded in the cassette D, picking was
locked."
005A_CIN 80D6_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette D."
005A_CIN 80D7_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette D."
005A_CIN 80D8_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette D."
005A_CIN 80D9_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette D."
005A_CIN 80DA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette D."
005A_CIN 80DB_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette D."
005A_CIN 80DC_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette D"
005A_CIN 80DD_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection occurred frequently with notes that were picked out
from the cassette D."
005A_CIN 9002_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Software error for pressure plate control at temporary stack
unit. Trouble detected at pressure plate control, but corresponding MTC
undefined."
005A_CIN 9003_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Software error for outlet control. Action indication of outlet
undefined."
005A_CIN 9004_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Software error for pressure plate control at temporary stack
unit. Action indication of temporary stack unit undefined."
005A_CIN 9005_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Software error for gate lever control at outlet. Trouble detected
at gate lever control, but corresponding MTC undefined."
005A_CIN 9006_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Software error for pressure plate control at returning stack
unit. Action indication of returning stack unit undefined."
005A_CIN 9007_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Software error for pressure plate control at returning stack
unit. Trouble detected at pressure plate control, but corresponding MTC
undefined."
005A_CIN 9008_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Software error for pressure plate control at collection cassette.
Action indication of collection unit undefined."
005A_CIN 9009_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Software error for pressure plate control at collection cassette.
Trouble detected at cassette control, but corresponding MTC undefined."
005A_CIN 900D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Data of transportation status is
unexpected at transportation for collection: outlet."
005A_CIN 900E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Data of transportation status is
unexpected at transportation for storing."
005A_CIN 900F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Data of transportation status is
unexpected at transportation for reset."
005A_CIN 9010_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
internal processing subsidiary task processing unit."
005A_CIN 9011_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
internal processing internal communication control unit."
005A_CIN 9012_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
internal processing EBH controller."
005A_CIN 9013_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
internal processing transportation control unit."
005A_CIN 9014_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH sSoftware control error. Time-over for completion of
internal processing cassette controller."
005A_CIN 9015_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
internal processing outlet control unit."
005A_CIN 9018_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
internal processing temporary stack control unit."
005A_CIN 9019_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
internal processing main motor control unit."
005A_CIN 901A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
internal processing cassette controller A."
005A_CIN 901B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
internal processing cassette controller B."

May 2011 347

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A_CIN 901C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
internal processing cassette controller C."
005A_CIN 901D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
internal processing cassette controller D."
005A_CIN 9022_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Denomination unmatched. Denomination for cassette A by
data write and information of cassette not matched."
005A_CIN 9024_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-over for completion of
internal processing: retract cassette control unit."
005A_CIN 9026_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Data of transportation status is
unexpected at transportation for returning."
005A_CIN 9027_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Trouble detected at suspension
processing of internal communication task before transportation."
005A_CIN 9028_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Trouble detected at start-up
processing of internal communication task after transportation."
005A_CIN 902B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Data of transportation status is
unexpected at transportation for deposit."
005A_CIN 902D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Data of transportation status is
unexpected at transportation for dispense."
005A_CIN 902F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Hardware error of EBH WDT-out for tray controller."
005A_CIN 9030_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Trouble detected internal commu-
nication."
005A_CIN 9031_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The type of safe pass that is read at Power ON does not corre-
spond with the"
005A_CIN 9037_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Trouble detected internal commu-
nication. Application error: erong denomination should be cashed in cassette A.
Sample:"
005A_CIN 9038_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Denomination unmatched. Denomination for cassette B by
data write and information of cassette not matched."
005A_CIN 9039_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Denomination unmatched. Denomination for cassette C by
data write and information of cassette not matched."
005A_CIN 903A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Denomination unmatched. Denomination for cassette D by
data write and information of cassette not matched."
005A_CIN 903B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Hardware error of EBH test of WDT-out abnormal. Time-out
communication mainbord -> tray controller."
005A_CIN 903C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Hardware error of EBH. Whole RAM clearing abnormal."
005A_CIN 903D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Received message abnormal at
tray controller."
005A_CIN 9050_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error or hardware error. Sensor power
control error."
005A_CIN 9051_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Lane is setting up for stacking, but dispense cassette is
installed."
005A_CIN 9052_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Denomination ID abnormal for cassette B. Lane is setting up
for stacking."
005A_CIN 9053_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Denomination ID abnormal for cassette C. Lane is setting up
for stacking, but dispense cassette is installed."
005A_CIN 9054_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Denomination ID abnormal for cassette D. Lane is setting up
for stacking, but dispense cassette is installed."
005A_CIN 9057_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Time-over for completion of command."
005A_CIN 905A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Denomination ID not set or it maybe not read."
005A_CIN 905B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Denomination ID not set or it maybe not read."
005A_CIN 905C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Denomination ID not set or it maybe not read."
005A_CIN 905D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Denomination ID not set or it maybe not read."
005A_CIN 9060_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Command data of transportation
handler abnormal: set of flapping test abnormal."
005A_CIN 9061_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The feeding lane is empty, detected by Handler."
005A_CIN 9062_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Denomination ID abnormal for reject cassette. Denomination
ID setting data is abnormal."
005A_CIN 9064_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-out of waiting for echo
check completion: echo check is requested to internal communication unit, but no
completion"
005A_CIN 9065_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-out of waiting for echo
check completion: error of echo check."
005A_CIN 9066_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Denomination ID setting data is abnormal. Data from BEB do
match to cassette (wrong ID`s)."
005A_CIN 9067_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Denomination ID setting data is abnormal, data from BEB do
match to cassette (wrong ID`s)."
005A_CIN 9068_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Denomination ID setting data is abnormal, data from BEB do
match to cassette (wrong ID`s)."
005A_CIN 9069_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Denomination ID setting data is abnormal. Data from BEB do
match to cassette (wrong ID`s)."

348 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A_CIN 906A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: FRU device data abnormal for cassette A. SUM check
abnormal for denomination. *Detected by EBH controller "
005A_CIN 906B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: FRU device data abnormal for cassette B. SUM check
abnormal for denomination. *Detected by EBH controller "
005A_CIN 906C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: FRU device data abnormal for cassette C. SUM check
abnormal for denomination. *Detected by EBH controller "
005A_CIN 906D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: FRU device data abnormal for cassette D. SUM check
abnormal for denomination. *Detected by EBH controller"
005A_CIN 906E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: FRU device data abnormal for reject cassette. SUM check
abnormal for denomination."
005A_CIN 906F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-out of waiting for FRU
device completion. No communication to cassette EEPROM."
005A_CIN 9070_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Indication code of main motor
control abnormal: action indicated during rotation - detected by motor handler."
005A_CIN 9071_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Control indicated, but not completed after 15 seconds -
detected motor handler."
005A_CIN 9072_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes disappeared in outlet when they must be stayed. Empty
in Ootlet, when dispensing handler is launched - detected transportation handler."
005A_CIN 9073_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes disappeared in temporary stack unit when they must be
stayed. Empty in temporary stack unit, when dispensing handler is launched -
detected"
005A_CIN 9074_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Time-over for cction of transportation handler. Action not
completed after predefined time by handler."
005A_CIN 9075_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Command data of transportation
hander abnormal - ACT2 abnormal."
005A_CIN 9076_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Command data of transportation
hander abnormal - set of limitation number of notes for temporary stack unit
abnormal."
005A_CIN 9077_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Command data of transportation
hander abnormal - set of dispensing number of notes abnormal."
005A_CIN 9078_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Relay monitoring area insuffi-
cient: area not allocated to writing arrival time for relay sensor."
005A_CIN 9079_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. BMT insufficient: area not
allocated during transportation - detected by transportation handler."
005A_CIN 907A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. BRT insufficient: area not
allocated during transportation - detected by transportation handler."
005A_CIN 907B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Memory data destroyed: data
which transportation handler uses is unexpected - memory maybe broken."
005A_CIN 907C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Unhypothetical note detected at
flapping: two or more than notes are waiting for flapping at same time."
005A_CIN 907D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Command data of transportation
hander abnormal: set of acceptable media abnormal."
005A_CIN 907E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Command data of transportation
hander abnormal: set of destination for denominations abnormal."
005A_CIN 9080_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Transportation handlers dupli-
cated launched: another transportation handler launched again during execution"
005A_CIN 9081_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Time-out for action of transpor-
tation handler - execution of transportation handler not completed after predefined
time."
005A_CIN 9082_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Recognition data of transportation
handler abnormal: denomination data not satisfied, but notes accepted."
005A_CIN 9083_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Recognition data of transportation
handler abnormal: recognition is NG, but notes accepted."
005A_CIN 9084_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Data of transportation handler
abnormal: transportation handler receives dispensing from not-installed cassette."
005A_CIN 9088_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Memory broken: recognition
response data BRT of transportation invalid."
005A_CIN 908C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Data of transportation handler
abnormal: motor stop indicated during transportation - detected by transportation
handler."
005A_CIN 90C1_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Memory data destroyed: data
which transportation handler uses is unexpected - memory maybe broken."
005A_CIN 90C2_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. BMT insufficient: area not
allocated during transportation - detected by transportation handler."
005A_CIN 90C3_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. BRT insufficient: area not
allocated during transportation - detected by rransportation handler."
005A_CIN 90C4_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Relay monitoring area insuffi-
cient: area not allocated to writing arrival time for relay sensor."
005A_CIN 90C5_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Unhypothetical note detected at
flapping: two or more than notes are waiting for flapping at same time."
005A_CIN 90C6_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Memory data destroyed: BRT
which transportation handler uses is unexpected - memory maybe broken."

May 2011 349

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A_CIN 90C7_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error. Memory data destroyed at trans-
portation handler. *Detected by tray controller "
005A_CIN 90C8_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Control indicated, but not completed after 3 seconds in trans-
portation handler."
005A_CIN 90C9_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It tried IOP signal of tray to turn OFF, but it did not turn OFF.
(Although the IOP signal is OFF, the motor run.)"
005A_CIN 90CA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The TG interruption processing stopped while conveying. TG
line is abnormal."
005A_CIN 90CB_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray software control error. Command error (message which
tray controller receive from EBH controller is abnormal)."
005A_CIN 90CF_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: TG Line abnormal. Executing of command, interrupt signal of
TG. Electrical noise on the wire."
005A_CIN 90D0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Error of sequence. EBH controller send signal of S51-ON in
serial order. *Detected by tray controller "
005A_CIN 90D1_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Error of sequence. EBH controller send signal of S51-OFF in
serial order. *Detected by tray controller "
005A_CIN 90D2_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray software control error. Time-over for completion of
internal processing in pressure plate control at cassette A."
005A_CIN 90D3_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray software control error. Time-over for completion of
internal processing in pressure plate control at cassette B."
005A_CIN 90D4_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray software control error. Time-over for completion of
internal processing in pressure plate control at cassette C."
005A_CIN 90D5_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray software control error. Time-over for completion of
internal processing in pressure plate control at cassette D."
005A_CIN 90D6_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray software internal command timing abnormal. Executing
of pressure plate control at cassette A, send command again."
005A_CIN 90D7_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray software internal command timing abnormal. Executing
of pressure plate control at cassette B, send command again."
005A_CIN 90D8_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray software internal command timing abnormal. Executing
of pressure plate control at cassette C, send command again."
005A_CIN 90D9_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray software internal command timing abnormal. Executing
of pressure plate control at cassette D, send command again."
005A_CIN 90DA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray software control error time-over for completion of
internal processing in pressure plate control at reject cassette."
005A_CIN 90DB_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray software internal command timing abnormal. Executing
of pressure plate control at reject cassette, send command again."
005A_CIN 90DD_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It tried to read data from EEPROM device of Reject cassette,
but there was no"
005A_CIN 90DE_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It tried to write data to EEPROM Device of Reject cassette but
there were no"
005A_CIN 90DF_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It tried to write data to EEPROM Device of Reject cassette, but
verify-error"
005A_CIN 90E0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: IOP cut for EBH controller. *Detected by tray controller "
005A_CIN 90E2_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray software control error. Rejection unit controller
appointed undefined sensor."
005A_CIN 90E3_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The interrupt processing test was executed in synthetic
mechanical test, but it failed. There was no interruption processing of S70-S79,
S80."
005A_CIN 90E4_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It tried to read data from FRU device of cassette A, but there
were no response. FRU device line is abnormal."
005A_CIN 90E5_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It tried to read data from FRU device of cassette A, but there
were no response. FRU device line is abnormal."
005A_CIN 90E6_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It tried to write data to FRU device of cassette A, but verify-
error was occurred. FRU device line is abnormal."
005A_CIN 90E7_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It tried to read data from FRU device of cassette B, but there
were no response. FRU device line is abnormal."
005A_CIN 90E8_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It tried to read data from FRU device of cassette B, but there
were no response. FRU device line is abnormal."
005A_CIN 90E9_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It tried to write data to FRU device of cassette B, but verify-
error was occurred FRU device line is abnormal."
005A_CIN 90EA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It tried to read data from FRU device of cassette C, but there
were no response FRU device line is abnormal."
005A_CIN 90EB_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It tried to read data from FRU device of cassette C, but there
were no response FRU device line is abnormal."
005A_CIN 90EC_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It tried to write data to FRU device of cassette C, but verify-
error was occurred FRU device line is abnormal."
005A_CIN 90ED_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It tried to read data from FRU device of cassette D, but there
were no response FRU device line is abnormal."
005A_CIN 90EE_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It tried to read data from FRU device of cassette D, but there
were no response FRU device line is abnormal."

350 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A_CIN 90EF_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It tried to write data to FRU device of cassette D, but verify-
error was occurred FRU device line is abnormal."
005A_CIN A009_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet. Notes must be remained in
outlet by status from transportation control (after returning of notes from outlet)"
005A_CIN A00A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet after initial reset is prepro-
cessed, S10,S12,S14,S15 are not lighting."
005A_CIN A00D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in I/O module or notes are detected
when they are not remained after transportation for returning reject notes to I/O
module."
005A_CIN A00E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in ESCROW unit or notes are detected
when they are not remained."
005A_CIN A00F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in ESCROW unit or notes are detected
when they are not remained."
005A_CIN A010_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet. S10,S12,S14,S15 are not
shielded when bucket is set at position of Dispensing - before deposit transpor-
tation."
005A_CIN A011_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are detected when they are not remained in outlet. Either
S1B,S1D,S1F,S2A is shielded when outlet is moved - before deposit transpor-
tation."
005A_CIN A012_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected by
mistake when they are not remained. Result of remaining check is changed when
bucket is moved"
005A_CIN A013_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
are not remained"
005A_CIN A014_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet after transportation for deposit
S10, S12, S14, S15"
005A_CIN A016_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are detected in outlet after processing identification by
the create reference signature. Either S10, S12, S14, S15 is shielded."
005A_CIN A01C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
are not remained after transportation for dispense, or the bucket position is
abnormal"
005A_CIN A01D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
are not remained before transportation for dispense. S10, S12, S14, S15"
005A_CIN A01E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in rejected note ESCROW Unit or notes
are detected when they are not remained in pressure plate moved for returning
reject notes"
005A_CIN A01F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet when pressure plate moved at
outlet after transportation for dispense. S10, S12, S14, S15"
005A_CIN A020_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The picking status error in the cassette A. After notes were
feed with the status "empty"."
005A_CIN A021_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The picking status error in the cassette B. After notes were feed
with the status "empty"."
005A_CIN A022_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The picking status error in the cassette C. After notes were feed
with the status "empty."."
005A_CIN A023_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The picking status error in the cassette D. After notes were fed
with the status "empty"."
005A_CIN A024_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet. Accumulation of notes is
reported by transportation control after returning transportation
005A_CIN A026_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Invalid number of dispensed notes."
005A_CIN A027_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet. Result of remaining check is
changed when bucket is set at position of accumulation - before dispensing trans-
portation"
005A_CIN A028_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are detected when they are not remained in outlet. One
of S1B, 1D, 1F, S2A is shielded when outlet is set at position of transportation
position"
005A_CIN A029_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in temporary stack unit."
005A_CIN A02A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
are not remained. Result of remaining check is changed before returning retry"
005A_CIN A02B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in temporary stack unit or notes are
detected when they are not remained."
005A_CIN A02C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in temporary stack unit or notes are
detected when they are not remained."
005A_CIN A02D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Number of notes in temporary stack unit and number of
returned notes are not same."
005A_CIN A02E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
are not remained. Result of remaining check is changed when bBucket is moved"
005A_CIN A030_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in temporary stack unit."
005A_CIN A031_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
are not remained. Result of remaining check is changed when bucket is moved"
005A_CIN A033_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in temporary stack unit or notes are
detected when they are not remained."
005A_CIN A034_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in temporary stack unit."

May 2011 351

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A_CIN A037_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Number of stacked notes in temporary stack unit and number
of recognized notes are not same after storing transportation."
005A_CIN A038_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Number of recognized notes and number of stored notes are
not same at storing."
005A_CIN A03D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are not remained in outlet, but they are detected at
synthetic transportation test."
005A_CIN A03E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are not remained in temporary stack unit, but they are
detected."
005A_CIN A03F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are not remained in returning stack unit, but detected at
synthetic transportation test."
005A_CIN A047_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
are not remained."
005A_CIN A04A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
are not remained."
005A_CIN A04B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
are not remained."
005A_CIN A04C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: There are abnormalities in a passage check."
005A_CIN A04D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
are not remained."
005A_CIN A04E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or are notes detected when they
are not remained."
005A_CIN A04F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in temporary stack unit or notes are
detected when they are not remained."
005A_CIN A050_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
are not remained."
005A_CIN A054_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
are not remained."
005A_CIN A055_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
are not remained."
005A_CIN A056_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet or notes are detected when they
are not remained."
005A_CIN A05A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in temporary stack unit or notes are
detected when they are not remained."
005A_CIN A060_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rear D lane S60. Abnormal interruption S60 cannot be turned
ON. S60 (cash-out transport from safe) is blocked but should be free."
005A_CIN A061_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rear D lane S54. Abnormal interruption S54 cannot be turned
ON. S54 (cash-in transport to safe) is blocked but should be free."
005A_CIN A062_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Abnormal interruption of S55. S55 cannot be turned ON."
005A_CIN A06B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Count of BID and count of accumulation place at S54 are not
same. Check is executed for each denomination."
005A_CIN A06C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: There is/are rejects, but value counted at accumulation sensor
S54 is 0. Note do not reach cash-in transport (S54)."
005A_CIN A06D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: There is/are rejects, but number of interrupts at accumulation
sensor S54 is 0. Note do not reach cash-in transport (S54)."
005A_CIN A06E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: There are no rejects, but there is interrupt at accumulation
sensor S54. Note do not reach cash-in transport (S54)."
005A_CIN A071_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Number of recognized notes by BID and number of calculated
notes are not same."
005A_CIN A072_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Number of stacked notes in temporary stack unit and count of
S30 interrupts are not same."
005A_CIN A074_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Count of S22/S24/S25/S26 and count of S50 are not same."
005A_CIN A075_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Number of stacked notes in temporary stack unit and count of
FL2 are not same."
005A_CIN A07A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection of notes is set in recognition response after transpor-
tation, but count of S46/47 is 0."
005A_CIN A07B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection of notes is set in recognition response after transpor-
tation, but interrupt count of S46/47 is 0."
005A_CIN A07C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Rejection of notes is not set in recognition response after trans-
portation, but interrupt of S46/47 is detected."
005A_CIN A07D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Calculation abnormal. Rejection of notes is not set in recog-
nition response after transportation."
005A_CIN A07E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Calculation abnormal. Rejection of notes is set in recognition
response after transportation."
005A_CIN A081_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Another note which was recognized is detected at Storing.
Reader swapped ID after second feed."
005A_CIN A082_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in outlet. The note was not able to be
detected in the transporting path."
005A_CIN A083_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are disappeared in temporary stack unit. Notes are trans-
ported into temporary stack unit."
005A_CIN A084_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Number of note which indicated by EBH controller and count
of tray controller are not same."

352 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A_CIN A085_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Number of reject note which indicated by EBH controller and
count of tray controller are not same."
005A_CIN A092_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Calculation abnormal: number of dispense notes."
005A_CIN A093_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Calculation abnormal: number of dispense notes."
005A_CIN A094_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Number of accumulated notes in cassette A abnormal."
005A_CIN A095_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Number of accumulated notes in cassette B abnormal."
005A_CIN A096_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Number of accumulated notes in cassette C abnormal."
005A_CIN A097_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Number of accumulated notes in cassette D abnormal."
005A_CIN A09A_E A700000 :4000 000DP01:3F:39p34 "CASHOUT RM2: Different denomination picked from Cassette A. Wrong
denomimation loaded to cassette A."
005A_CIN A09B_E A700000 :4000 000DP01:3F:39p34 "CASHOUT RM2: Different denomination picked from Cassette B. Wrong
denomimation loaded to cassette B."
005A_CIN A09C_E A700000 :4000 000DP01:3F:39p34 "CASHOUT RM2: Different denomination picked from Cassette C. Wrong
denomimation loaded to cassette C."
005A_CIN A09D_E A700000 :4000 000DP01:3F:39p34 "CASHOUT RM2: Different denomination picked from cassette D. Wrong
denomimation loaded to cassette D."
005A_CIN A0A1_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Value count at S65, S66, S67 > value count at S2B "
005A_CIN A0A2_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Value count at S65, S66, S67 > value count at S2B "
005A_CIN A0B7_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Note is transported into entrance of tray, when it is not destined
to returning entrance of tray."
005A_CIN A0B8_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Note is transported into outlet of tray, when it is not destined
to returning outlet of tray."
005A_CIN A0B9_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Note is transported into outlet unit, when it is not destined to
outlet unit."
005A_CIN A0BA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Note is transported into temporary stack unit, when it is not
destined to temporary stack unit."
005A_CIN A0BB_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Note is transported into L2 box, when it is not destined to L2
box."
005A_CIN A0C1_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Note is transported into cassette A, when it is not destined to
there. *Detected by tray controller"
005A_CIN A0C2_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Note is transported into cassette B, when it is not destined to
there. *Detected by tray controller"
005A_CIN A0C3_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Note is transported into cassette C, when it is not destined to
there. *Detected by tray controller"
005A_CIN A0C4_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Note is transported into cassette D, when it is not destined to
there. *Detected by tray controller"
005A_CIN A0C7_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes are transported to unexpected direction. Note is trans-
ported into retract cassette, when it is not destined to there."
005A_CIN A0C8_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Note is transported into reject, when it is not destined to there.
*Detected by tray controller"
005A_CIN A0CA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: No reject note, but reject sensor detect notes. *Detected by tray
controller "
005A_CIN A0D1_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Subtract number of accumulation cassette B, C, D from count
of S71 and count of S72 are not same. *Detected by tray controller"
005A_CIN A0D2_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Subtract number of accumulation cassette C, D from count of
S73 and count of S74 are not same. *Detected by tray controller"
005A_CIN A0D3_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Subtract number of accumulation Cassette D from count of
S75 and count of S77 are not same. *Detected by tray controller"
005A_CIN A0D4_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Count of S77 and count of S78 are not same. *Detected by tray
controller "
005A_CIN A0D5_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Number of accumulation for cassette A, B, C and D and count
of S51 are not same."
005A_CIN A0D6_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Count of S70 and count of S51 are not same."
005A_CIN B001_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: After request for transmission to BID, tesponse data is not
embedded in ting buffer."
005A_CIN B002_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Request for transmission of the reception block, sequence
abnormal, retries exceeded."
005A_CIN B003_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Request for transmission of the reception block, CRC check
error, retries exceeded."
005A_CIN B004_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Request for transmission of the reception block, time-out of
waiting for response, retries exceeded."
005A_CIN B005_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Request for transmission of the reception block, over-run/
parity abnormal, retries exceeded."
005A_CIN B006_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The event that was not sure to exist in the matrix was
generated."
005A_CIN B007_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: It doesn't return even if the response from BID passes 26
seconds."
005A_CIN B008_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: The command transmission completion is not done. Or,
reception completion receipt transmission completion is not done."

May 2011 353

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A_CIN B009_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: A soft error: There is no reception receipt though the receipt
reception event was generated. (illegal event)"
005A_CIN B00A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: A soft error: There is no reception response though the
response reception event was generated. (illegal event)"
005A_CIN B00B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Transmission error generation when response is received."
005A_CIN B00C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: BID status error. The state doesn't become normal though it
confirmed to BID with status request."
005A_CIN B020_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Transportation is cancelled, because response for recognition
is not transmitted from BID."
005A_CIN C000_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C001_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Command time-out. Communication error (BEB error $001) "
005A_CIN C002_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Command execution interrupted. Communication error(BEB
error $002) "
005A_CIN C003_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Command not expected. Communication error (BEB error
$003) "
005A_CIN C004_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Data length or content of the command invalid. Communi-
cation error (BEB error $004)"
005A_CIN C005_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Data length invalid. Communication error (BEB error $005) "
005A_CIN C006_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $006) "
005A_CIN C007_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $007) "
005A_CIN C008_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $008) "
005A_CIN C009_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Data length invalid. Communication error (BEB error $005) "
005A_CIN C00A_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $00A) "
005A_CIN C00B_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Argument not admissible. Communication error (BEB error
$00B) "
005A_CIN C00C_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Defective data. Data error (BEB error $00C) "
005A_CIN C00D_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C00E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Unknown error from banknote validator."
005A_CIN C00F_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C010_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $010) "
005A_CIN C011_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $011) "
005A_CIN C012_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $012) "
005A_CIN C013_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $013) "
005A_CIN C014_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Supporting memory space deleted. Note table (BEB error
$014) "
005A_CIN C015_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Supporting memory space deleted. Note table (BEB error
$015) "
005A_CIN C016_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Note from supporting memory recovered. Note table (BEB
error $016) "
005A_CIN C017_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Note from supporting memory not recoverable Note table
(BEB error $017) "
005A_CIN C018_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Extension module not available. Hardware error (BEB error
$018) "
005A_CIN C019_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Corrupt entries in note table deleted. Note table (BEB error
$019) "
005A_CIN C01A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Unknown error from banknote validator."
005A_CIN C01B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Unknown error from banknote validator."
005A_CIN C01C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Unknown error from banknote validator."
005A_CIN C01D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Unknown error from banknote validator."
005A_CIN C01E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Unknown error from banknote validator."
005A_CIN C01F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Unknown error from banknote validator."
005A_CIN C020_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $020) "
005A_CIN C021_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $021) "
005A_CIN C022_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Conflict of firmware version. Firmware error (BEB error
$022) "
005A_CIN C023_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $023) "
005A_CIN C024_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $024) "
005A_CIN C025_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $025) "
005A_CIN C026_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $026) "
005A_CIN C027_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $027) "
005A_CIN C028_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $028) "
005A_CIN C029_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $029) "
005A_CIN C02A_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $02A) "
005A_CIN C02B_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $02B) "
005A_CIN C02C_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Transport clock missing or outside permitted tolerance. Reader
module maintenance (BEB error $02C)"
005A_CIN C02D_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Note level detected (light level too high due to soiled roller or
because a document is under reader window)."

354 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A_CIN C02E_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Illumination regulation failed. Hardware error (BEB error
$02E) "
005A_CIN C02F_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Extrinsic light in reader module. Reader module maintenance
(BEB error $02F) "
005A_CIN C030_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $030) "
005A_CIN C031_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware test failed. Hardware error (BEB error $031) "
005A_CIN C032_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $032) "
005A_CIN C033_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $033) "
005A_CIN C034_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Communication time-out extension module 1. Hardware error
(BEB error $034) "
005A_CIN C035_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Communication time-out extension module 2. Hardware error
(BEB error $035) "
005A_CIN C036_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Communication time-out additional module. Hardware error
(BEB error $036) "
005A_CIN C037_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: UV-tube reader 1 malfunctioning > Reader module mainte-
nance. Reader module maintenance (BEB error $037)"
005A_CIN C038_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: UV-tube reader 2 malfunctioning. Reader module mainte-
nance (BEB error $038) "
005A_CIN C039_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Hardware error (BEB error $039) "
005A_CIN C03A_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Corrupt EAROM parameter. Firmware error (BEB error
$03A) "
005A_CIN C03B_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C03C_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C03D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Unknown error from banknote validator."
005A_CIN C03E_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C03F_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C040_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Note memory space empty. Data error (BEB error $040) "
005A_CIN C041_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Note memory space occupied. Data error (BEB error $041) "
005A_CIN C042_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Note data corrupt. Data error (BEB error $042) "
005A_CIN C043_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Auxiliary memory space occupied Note table (BEB error
$043) "
005A_CIN C044_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Data on auxiliary memory space corrupt. Note table (BEB
error $044) "
005A_CIN C045_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Note memory address invalid. Data error (BEB error $045) "
005A_CIN C046_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Note data too large. Data error (BEB error $046) "
005A_CIN C047_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Note memory full. Note table (BEB error $047) "
005A_CIN C048_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Signature format incorrect. Data error (BEB error $048) "
005A_CIN C049_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Signature version incorrect. Data error (BEB error $049) "
005A_CIN C04A_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Data error (BEB error $04A) "
005A_CIN C04B_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Signature data corrupt. Data error (BEB error $04B) "
005A_CIN C04C_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Signature data CRC incorrect. Data error (BEB error $04C) "
005A_CIN C04D_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Currency data CRC incorrect. Data error (BEB error $04D) "
005A_CIN C04E_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Data error (BEB error $04E) "
005A_CIN C04F_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: ROM check CRC incorrect. Reader module maintenance
(BEB error $050) "
005A_CIN C050_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Tape sensor not responding. Communication error (BEB error
$051) "
005A_CIN C051_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Command execution on tape sensor failed. Firmware error
(BEB error $052) "
005A_CIN C052_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Tape sensor calibration failed. Hardware error (BEB error
$053) "
005A_CIN C053_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Tape sensor firmware download failed. Hardware error (BEB
error $054) "
005A_CIN C054_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Corrupt firmware on tape sensor. Firmware error (BEB error
$055) "
005A_CIN C055_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C056_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C057_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C058_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C059_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C05A_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C05B_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C05C_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C05D_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C05E_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C05F_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C060_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Format check message incorrect. Data error (BEB error $060)
$P"

May 2011 355

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A_CIN C061_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C062_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C063_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C064_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C065_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C066_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C067_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C068_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C069_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C06A_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C06B_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C06C_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C06D_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C06E_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C06F_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C070_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C071_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C072_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C073_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C074_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C075_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C076_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C077_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C078_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C079_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C07A_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C07B_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C07C_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C07D_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C07E_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C07F_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C080_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C081_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C082_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C083_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C084_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C085_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C086_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C087_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C088_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C089_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C08A_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C08B_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C08C_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C08D_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C08E_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C08F_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C090_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C091_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C092_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C093_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C094_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C095_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C096_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C097_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C098_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C099_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C09A_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C09B_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C09C_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C09D_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C09E_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C09F_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0A0_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."

356 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A_CIN C0A1_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0A2_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0A3_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0A4_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0A5_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0A6_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0A7_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0A8_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0A9_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0AA_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0AB_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0AC_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0AD_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0AE_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0AF_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0B0_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0B1_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0B2_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0B3_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0B4_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0B5_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0B6_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0B7_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0B8_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0B9_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0BA_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0BB_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0BC_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0BD_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0BE_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0BF_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0C0_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0C1_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0C2_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0C3_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0C4_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0C5_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0C6_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0C7_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0C8_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0C9_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0CA_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0CB_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0CC_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0CD_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0CE_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0CF_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0D0_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0D1_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0D2_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0D3_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0D4_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0D5_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0D6_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0D7_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0D8_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0D9_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0DA_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0DB_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0DC_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0DD_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0DE_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0DF_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0E0_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."

May 2011 357

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A_CIN C0E1_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0E2_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0E3_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0E4_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0E5_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0E6_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0E7_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0E8_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0E9_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0EA_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0EB_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0EC_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0ED_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0EE_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0EF_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0F0_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0F1_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0F2_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0F3_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0F4_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0F5_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0F6_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0F7_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0F8_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0F9_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0FA_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0FB_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0FC_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0FD_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0FE_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN C0FF_E A700000 :4000 000DP01:38:00:00 "CASHOUT RM2: Unknown error from note reader BEB."
005A_CIN D001_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Half-size note detected by dispensing from outlet."
005A_CIN E080_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Erase error for flash memory. Erase command is transmitted
to flash memory, but error is replied."
005A_CIN E081_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Write error for flash memory. Write command is transmitted
to flash memory, but error is replied."
005A_CIN E082_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Write data for flash memory abnormal. Write data and read
data are not same after data write."
005A_CIN E0F0_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data of PDL command abnormal. Write data is abnormal."
005A_CIN E0F1_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: SUM of PDL abnormal. SUM check error is detected after
normal completion of PDL."
005A_CIN E0FA_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data of PDL command abnormal. Chain Control Data is
abnormal."
005A_CIN E0FC_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data of PDL command abnormal. ID of CNTL is not correct."
005A_CIN E0FD_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data of PDL command abnormal. BCC is not correct."
005A_CIN E0FF_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Data of PDL command abnormal. 2nd byte of CNTL is not
defined."
005A_CIN F001_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Communication troubled between main software and EBH.
System error detected at EBH."
005A_CIN F002_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Communication troubled between main software and EBH.
Time-out of WDT."
005A_CIN F003_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Communication troubled between main software and EBH."
005A_CIN F004_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Communication troubled between main software and EBH."
005A_CIN F029_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
controller failed."
005A_CIN F025_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
controller failed."
005A_CIN F02A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
controller failed."
005A_CIN F02B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
controller failed."
005A_CIN F02C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
controller failed."
005A_CIN F015_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Time-out or receiving
of NAK is detected."
005A_CIN F009_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Memory data destroyed. Memory data destroyed because of
memory back-up dead."

358 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

005A_CIN F011_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: LAN of internal communication control abnormal. Status
abnormal at completion of transmission."
005A_CIN F027_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
controller failed."
005A_CIN F013_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal."
005A_CIN F028_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
controller failed."
005A_CIN F020_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
controller failed."
005A_CIN F021_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
controller failed."
005A_CIN F022_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
controller failed."
005A_CIN F023_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
controller failed."
005A_CIN F024_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
controller failed."
005A_CIN F026_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
controller failed."
005A_CIN F014_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal."
005A_CIN F012_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal."
005A_CIN F047_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
005A_CIN F04B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
005A_CIN F02D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
controller failed."
005A_CIN F04A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
005A_CIN F02E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
controller failed."
005A_CIN F048_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
005A_CIN F046_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
005A_CIN F045_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
005A_CIN F044_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
005A_CIN F043_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
005A_CIN F042_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
005A_CIN F041_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
005A_CIN F04D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
005A_CIN F031_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal."
005A_CIN F030_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
controller failed."
005A_CIN F02F_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal. Interface test of tray
controller failed."
005A_CIN F091_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH internal communication abnormal."
005A_CIN F04E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
005A_CIN F04C_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
005A_CIN F040_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
005A_CIN F049_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Tray controller, transportation control sequence abnormal."
005A_CIN 408A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: FL4 returned to home position, but S80 shielded."
005A_CIN 1029_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Pressure mechanism abnormal: at temporary stack unit."
005A_CIN 904D_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error or hardware error. EBH control
carry out wording-of-a-telegram transmission at the tray control"
005A_CIN 904E_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: EBH software control error or hardware error. EBH control
carry out wording-of-a-telegram transmission at the BID"
005A_CIN 5017_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes can not be collected, because some part of notes are
already out of outlet."
005A_CIN 501A_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes can not be collected, because some part of notes are
already out of outlet, notes are already out of outlet obliquely"
005A_CIN 501B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Notes can not be collected after no-dispensing."
005A_CIN 500B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S14 shielded "
005A_CIN 10E9_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
generated according to illegal timing of SW1C watch time-up event."
005A_CIN 10E6_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: While in the pressure plate in Outlet Unit controlled. It is
generated according to illegal timing of SW1C ON or OFF event."
005A_CIN 00DC_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Media may be remained in cassette D or sensor is abnormal.
*Detected by tray controller"
005A_CIN 3026_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam between S18 and S2B. Jam in path R."
005A_CIN 300B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Jam at rear of BID. Jam between S23 and S51."
005A_CIN 400B_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: S76 shielded at transportation: it must not be shielded - media
may be remained or sensor is abnormal. *Detected by tray controller"

May 2011 359

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005A_CIN 8020_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Many BID other error 1"
005A_CIN 8021_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Many BID other error 2"
005A_CIN 8022_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Many BID other error 3"
005A_CIN 8023_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Many BID other error 4"
005A_CIN 8024_E A700000 :4000 000DP01:3D:33:35 "CASHOUT RM2: Many BID other error 5"

360 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Euro Banknote Handler (EBH/RM2) (Class: 005E)

The following table lists the MDS Status codes assigned to the Euro Bank Note
Handler cass 005E.

Table 94: Euro Bank Note Handler (class: 005E)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
005E DEFA_E ?0912 80000000000000030 000DI01:38:39:31 "CASHOUT RM2: DEFAULT_ERROR"
005E DEFA_W ?0912 80000000000000030 000DI01:38:39:31 "CASHOUT RM2: DEFAULT_WARNING"
005E 1004_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Programming error, order received with wrong input
length"
005E 100E_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: CSCWINI.DLL could not be opened"
005E 100F_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Device handler has not been yet initialized"
005E 8000_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Parameter(s) of the command have a wrong syntax"
005E 8001_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Command not allowed, context error"
005E 8002_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Received USB data was not in the expected format"
005E 8003_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Executing this function is not allowed in the current
transaction mode"
005E 8004_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: The pointer pSignatureData is illegal"
005E 8005_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: The device driver is not compatible with loaded
firmware."
005E 8100_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for ARTICLE6 in registry with
[CSCEBH]"
005E 8101_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for UNFIT in registry with [CSCEBH]"
005E 8102_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for UNFIT in registry with [CSCEBH]"
005E 8103_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for UNFIT_PARAM in registry with
[CSCEBH]"
005E 8104_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for LOADER_CTL in registry with
[CSCEBH]"
005E 8105_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for CY_AUTOLOAD in registry with
[CSCEBH]
005E 8106_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for CY_MAP_NOTES in registry with
[CSCEBH]"
005E 8107_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong parameter in section COUNTER in registry with
[CSCEBH]"
005E 8108_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for LED, LED_FLASH or LED_FREQ in
registry with [CSCEBH]"
005E 8109_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for FILE_CTR in registry with
[CSCEBH]"
005E 810A_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for FILE1..FILEn in registry with
[CSCEBH]"
005E 810B_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for STORING_EXCEPTIONS in registry
with [CSCEBH]."
005E 810D_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for REJ_RES in registry with [CSCEBH]"
005E 810E_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for ARTICLE6_CUR in registry with
[CSCEBH]"
005E 810F_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for ESCROW_MAX in registry with
[CSCEBH]"
005E 8110_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for RESET_TARGET in registry with
[CSCEBH]"
005E 8111_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for RESET_RETRIES in registry with
[CSCEBH]"
005E 8112_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for MAX_RETRACT in registry with
[CSCEBH]"
005E 8113_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for DAYS_ITRC in registry with
[CSCEBH]."
005E 8114_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for JAM_RESOLVE in registry with
[CSCEBH]."

May 2011 361

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005E 8115_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for EXT_METAL_DETECTION_INIT in
registry with [CSCEBH]."
005E 8116_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for IOM_EVAL in registry with
[CSCEBH]."
005E 8117_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for DISPENSE in registry with
[CSCEBH]."
005E 8118_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for AUTO_DISABLE in registry with
[CSCEBH]."
005E 8119_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for RETRACT_HISTORY in registry with
[CSCEBH]."
005E 811A_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for MAX_NOTE_WIDTH_S in registry
with [CSCEBH]."
005E 811B_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for SAFE_PASS in registry with
[CSCEBH]."
005E 811C_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for MIXER_OWNER in registry with
[CSCEBH]."
005E 811D_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for COUNTER_SUBST in registry with
[CSCEBH]."
005E 811E_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for INKED_NOTES_ACCEPT in registry
with [CSCEBH]."
005E 811F_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for SKEW_... in registry with [CSCEBH]."
005E 8120_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong parameter in section RETRACTS in registry with
[CSCEBH]."
005E 8121_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Wrong value for MAX_NOTE_LENGTH in registry
with [CSCEBH]."
005E 8200_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: General firmware error"
005E 8201_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Command not allowed at this time, reset device
required"
005E 8202_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Command not allowed at this time, reset device
required"
005E 8203_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: The banknotes were not properly inserted in the cashin
tray"
005E 8300_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: The firmware file could not be accessed"
005E 8301_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: The currency file could not be accessed, check file"
005E 8302_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: The firmware file contains invalid data"
005E 8303_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: The currency file contains invalid data"
005E 9000_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Communication problem on the USB line to the device"
005E F001_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Device handler was configured to switch LEDs when
waiting for the removal"
005E F002_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Problem when accessing properties mandatory for article
6 handling"
005E F003_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Status that tells the application that all banknotes have
been taken"
005E F004_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Device handler has recognized that another program has
used the device"
005E F005_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Mechanical trouble during shutter command execution"
005E F006_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Metal detection defective or not connected"
005E F007_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Error during access the XLGAPI.DLL"
005E F008_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: The retract command can not be completed"
005E F009_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Dispenser problem in the cash-in tray"
005E F00A_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Number or value of notes counted in the safe is different
from the ESCROW counters"
005E F00B_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Sensor check error detected during maintenance"
005E F00C_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Parameter error detected during maintenance, specified
unit or sensor number illegal"
005E F00D_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM2: Transportation way could not be checked because of no
dispensing."

362 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

EBH Cash In (EBH/RM2) (Class: 005E_CIN)

The following table lists the M-Status and M-Data codes assigned to the Euro
Bank Note Handler class 005E_CIN. This class is set in case an error of the
EBH module has occurred in a cash in transaction.

Refer to section ”Error Class Mapping” on page 5.

Table 95: EBH Cash In (class: 005E_CIN)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
005E_CIN DEFA_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: DEFAULT_ERROR"
005E_CIN DEFA_W A700000 :4000 000DP01:38:39:31 "CASHIN RM2: DEFAULT_WARNING"
005E_CIN 1004_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Programming error, order received with wrong input length"
005E_CIN 100E_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: CSCWINI.DLL could not be opened"
005E_CIN 100F_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Device handler has not been yet initialized"
005E_CIN 8000_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Parameter(s) of the command have a wrong syntax"
005E_CIN 8001_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Command not allowed, context error"
005E_CIN 8002_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Received USB data was not in the expected format"
005E_CIN 8003_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Executing this function is not allowed in the current trans-
action mode"
005E_CIN 8004_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: The pointer pSignatureData is illegal"
005E_CIN 8005_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: The device driver is not compatible with loaded firmware."
005E_CIN 8100_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for ARTICLE6 in registry with [CSCEBH]"
005E_CIN 8101_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for UNFIT in registry with [CSCEBH]"
005E_CIN 8102_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for UNFIT in registry with [CSCEBH]"
005E_CIN 8103_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for UNFIT_PARAM in registry with
[CSCEBH]"
005E_CIN 8104_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for LOADER_CTL in registry with [CSCEBH]"
005E_CIN 8105_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for CY_AUTOLOAD in registry with
[CSCEBH]
005E_CIN 8106_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for CY_MAP_NOTES in registry with
[CSCEBH]"
005E_CIN 8107_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong parameter in section COUNTER in registry with
[CSCEBH]"
005E_CIN 8108_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for LED, LED_FLASH or LED_FREQ in
registry with [CSCEBH]"
005E_CIN 8109_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for FILE_CTR in registry with [CSCEBH]"
005E_CIN 810A_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for FILE1..FILEn in registry with [CSCEBH]"
005E_CIN 810D_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for REJ_RES in registry with [CSCEBH]"
005E_CIN 810E_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for ARTICLE6_CUR in registry with
[CSCEBH]"
005E_CIN 810F_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for ESCROW_MAX in registry with
[CSCEBH]"
005E_CIN 8110_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for RESET_TARGET in registry with
[CSCEBH]"
005E_CIN 8111_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for RESET_RETRIES in registry with
[CSCEBH]"
005E_CIN 8112_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for MAX_RETRACT in registry with
[CSCEBH]"
005E_CIN 8113_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for DAYS_ITRC in registry with [CSCEBH]."
005E_CIN 8114_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for JAM_RESOLVE in registry with
[CSCEBH]."
005E_CIN 8115_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for EXT_METAL_DETECTION_INIT in
registry with [CSCEBH]."
005E_CIN 8116_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for IOM_EVAL in registry with [CSCEBH]."
005E_CIN 8117_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for DISPENSE in registry with [CSCEBH]."

May 2011 363

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

005E_CIN 8118_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for AUTO_DISABLE in registry with
[CSCEBH]."
005E_CIN 8119_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for RETRACT_HISTORY in registry with
[CSCEBH]."
005E_CIN 811A_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for MAX_NOTE_WIDTH_S in registry with
[CSCEBH]."
005E_CIN 811B_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for SAFE_PASS in registry with [CSCEBH]."
005E_CIN 811C_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for MIXER_OWNER in registry with
[CSCEBH]."
005E_CIN 811D_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for COUNTER_SUBST in registry with
[CSCEBH]."
005E_CIN 811E_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for INKED_NOTES_ACCEPT in registry with
[CSCEBH]."
005E_CIN 811F_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for SKEW_... in registry with [CSCEBH]."
005E_CIN 8120_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong parameter in section RETRACTS in registry with
[CSCEBH]."
005E_CIN 8121_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Wrong value for MAX_NOTE_LENGTH in registry with
[CSCEBH]."
005E_CIN 8200_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: General firmware error"
005E_CIN 8201_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Command not allowed at this time, reset device required"
005E_CIN 8202_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Command not allowed at this time, reset device required"
005E_CIN 8203_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: The banknotes were not properly inserted in the cashin tray"
005E_CIN 8300_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: The firmware file could not be accessed"
005E_CIN 8301_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: The currency file could not be accessed, check file"
005E_CIN 8302_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: The firmware file contains invalid data"
005E_CIN 8303_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: The currency file contains invalid data"
005E_CIN 9000_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Communication problem on the USB line to the device"
005E_CIN F001_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Device handler was configured to switch LEDs when waiting
for the removal"
005E_CIN F002_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Problem when accessing properties mandatory for article 6
handling"
005E_CIN F003_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Status that tells the application that all banknotes have been
taken"
005E_CIN F004_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Device handler has recognized that another program has used
the device"
005E_CIN F005_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Mechanical trouble during command execution"
005E_CIN F006_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Metal detection defective or not connected"
005E_CIN F007_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Error during access the XLGAPI.DLL"
005E_CIN F008_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: The retract command can not be completed"
005E_CIN F009_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Dispenser problem in the cash-in tray"
005E_CIN F00A_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Number or value of notes counted in the safe is different from
the ESCROW counters"
005E_CIN F00B_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Sensor check error detected during maintenance"
005E_CIN F00C_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Parameter error detected during maintenance, specified unit or
sensor number illegal"
005E_CIN F00D_E A700000 :4000 000DP01:38:39:31 "CASHIN RM2: Transportation way could not be checked because of no
dispensing."

364 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

Printer Form errors (REC/DOC) (Class: 6431)

The following table lists the M-Status and M-Data codes assigned to Receipt
and Document printers if Forms printing is aktivated (FormsPrt.dll in use). The
following errors are just related to definition errors around forms print.

Table 96: Forms Print errors (class: 6431)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
6431 FF9C_E 22920000 22920000 000PR01:3F:00:01 "FORMS PRT REC: (-100) Form not found"
6431 FF9B_E 22920000 22920000 000PR01:3F:00:01 "FORMS PRT REC: (-101) Field not found"
6431 FF97_E 22920000 22920000 000PR01:3F:00:01 "FORMS PRT REC: (-105) Media overflow"
6431 FF96_E 22920000 22920000 000PR01:3F:00:01 "FORMS PRT REC: (-106) Field spec. failure"
6431 FF95_E 22920000 22920000 000PR01:3F:00:01 "FORMS PRT REC: (-107) Field error"
6431 FF94_E 22920000 22920000 000PR01:3F:00:01 "FORMS PRT REC: (-108) Media not found"
6431 FF93_E 22920000 22920000 000PR01:3F:00:01 "FORMS PRT REC: (-109) Extension not supported"
6431 FF92_E 22920000 22920000 000PR01:3F:00:01 "FORMS PRT REC: (-110) Media invalid"
6431 FF91_E 22920000 22920000 000PR01:3F:00:01 "FORMS PRT REC: (-111) Form invalid"
6431 FF90_E 22920000 22920000 000PR01:3F:00:01 "FORMS PRT REC: (-112) Field invalid"
6431 FF8F_E 22920000 22920000 000PR01:3F:00:01 "FORMS PRT REC: (-113) Media skewed"
6431 EF9C_E 28401000 28401000 000SP01:3F:40:40 "FORMS PRT DOC: (-100) Form not found"
6431 EF9B_E 28401000 28401000 000SP01:3F:40:40 "FORMS PRT DOC: (-101) Field not found"
6431 EF97_E 28401000 28401000 000SP01:3F:40:40 "FORMS PRT DOC: (-105) Media overflow"
6431 EF96_E 28401000 28401000 000SP01:3F:40:40 "FORMS PRT DOC: (-106) Field spec. failure"
6431 EF95_E 28401000 28401000 000SP01:3F:40:40 "FORMS PRT DOC: (-107) Field error"
6431 EF94_E 28401000 28401000 000SP01:3F:40:40 "FORMS PRT DOC: (-108) Media not found"
6431 EF93_E 28401000 28401000 000SP01:3F:40:40 "FORMS PRT DOC: (-109) Extension not supported"
6431 EF92_E 28401000 28401000 000SP01:3F:40:40 "FORMS PRT DOC: (-110) Media invalid"
6431 EF91_E 28401000 28401000 000SP01:3F:40:40 "FORMS PRT DOC: (-111) Form invalid"
6431 EF90_E 28401000 28401000 000SP01:3F:40:40 "FORMS PRT DOC: (-112) Field invalid"
6431 EF8F_E 28401000 28401000 000SP01:3F:40:40 "FORMS PRT DOC: (-113) Media skewed"

May 2011 365

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

RM3 (CINEO series) errors (Class: 65C0)

The following table lists the M-Status and M-Data codes assigned to the
recycling module RM3 used in Wincor Nixdorf Cineo systems.

Table 97: RM3 (Cineo series) errors (class: 65c0)

Error Error Diebold Diebold MDS i series Status desription
Class Code 911 code 911 code status code INFO
65C0 DEFA_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: DEFAULT_ERROR"
65C0 DEFA_W ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: DEFAULT_WARNING"
65C0 0001_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Unknown general error"
65C0 03E8_E ?0912 80000000000000000 000DI01:38:00:00 "CASHOUT RM3: Unknown IO error"
65C0 03E9_E ?0912 80000000000000000 000DI01:38:00:00 "CASHOUT RM3: Checksum error"
65C0 03EA_E ?0912 80000000000000000 000DI01:38:00:00 "CASHOUT RM3: Communication error"
65C0 03EB_E ?0912 80000000000000000 000DI01:38:00:00 "CASHOUT RM3: Unsupported function"
65C0 044C_E ?0912 80000000000000000 000DI01:38:00:00 "CASHOUT RM3: Unknown USB error"
65C0 044D_E ?0912 80000000000000000 000DI01:38:00:00 "CASHOUT RM3: USB error 1"
65C0 04B0_E ?0912 80000000000000000 000DI01:38:00:00 "CASHOUT RM3: Unknown secure channel error"
65C0 04B1_E ?0912 80000000000000000 000DI01:38:00:00 "CASHOUT RM3: Secure channel error 1"
65C0 04B2_E ?0912 80000000000000000 000DI01:38:00:00 "CASHOUT RM3: Secure channel error 2"
65C0 04B3_E ?0912 80000000000000000 000DI01:38:00:00 "CASHOUT RM3: Secure channel error 3"
65C0 04B4_E ?0912 80000000000000000 000DI01:38:00:00 "CASHOUT RM3: Secure channel error 4"
65C0 04B5_E ?0912 80000000000000000 000DI01:38:00:00 "CASHOUT RM3: Secure channel error 5"
65C0 04B6_E ?0912 80000000000000000 000DI01:38:00:00 "CASHOUT RM3: Secure channel error 6"
65C0 04B7_E ?0912 80000000000000000 000DI01:38:00:00 "CASHOUT RM3: Secure channel error 7"
65C0 04B8_E ?0912 80000000000000000 000DI01:38:00:00 "CASHOUT RM3: Secure channel error 8"
65C0 04B9_E ?0912 80000000000000000 000DI01:38:00:00 "CASHOUT RM3: Secure channel error 9"
65C0 04BA_E ?0912 80000000000000000 000DI01:38:00:00 "CASHOUT RM3: Secure channel error 10"
65C0 04BB_E ?0912 80000000000000000 000DI01:38:00:00 "CASHOUT RM3: Secure channel error 11"
65C0 04BC_E ?0912 80000000000000000 000DI01:38:00:00 "CASHOUT RM3: Secure channel error 12"
65C0 04BD_E ?0912 80000000000000000 000DI01:38:00:00 "CASHOUT RM3: Secure channel error 13"
65C0 07D0_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Unknown context error"
65C0 09C4_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: CashOut operating needed"
65C0 09C5_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: CashOut configuration needed"
65C0 0A28_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: CashIn operating needed"
65C0 0A29_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: CashIn configuration needed"
65C0 0BB8_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Unknown hardware error"
65C0 0BB9_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Defect module fatal"
65C0 0BBA_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Defect CRS collector blocked"
65C0 0BBB_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Defect uncalibrated sensors"
65C0 0BBC_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Defect manual device check needed"
65C0 0BBD_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Defect CRS io unit note jam"
65C0 0BBE_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Defect fatal motor overcurrent"
65C0 0C1C_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the entry sensor head position of the
ESCROW"
65C0 0C1D_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the entry sensor head position of the
single unit head"
65C0 0C1E_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the dispense sensor head position of
the ATS input output unit's dispenser"
65C0 0C1F_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor head position of
the ATS input output unit's note detector"
65C0 0C20_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the entry sensor head position of the
ATS input output unit's output tray"
65C0 0C21_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor head position of
the ATS input output unit's thickness sensor"
65C0 0C22_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the entry sensor head position of the
CRS input output unit's collector"
65C0 0C23_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the dispense Sensor head position of
the CRS input output unit's dispenser"
65C0 0C24_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor head position of
the CRS input output unit's note detector"
65C0 0C25_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor head position of
the thickness sensor in the CRS input output unit"

366 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

65C0 0C26_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the entry sensor head position of the
docking transport in the replenish unit"
65C0 0C27_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the docking transport head position
Ps1"
65C0 0C28_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the docking transport head position
Ps2"
65C0 0C29_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the docking transport head position
Ps3"
65C0 0C2A_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the head position of the front load
junction entry. "
65C0 0C2B_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the head position of the front load safe
entry"
65C0 0C2C_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor head position of
the note detector in the input unit of the POS input output unit"
65C0 0C2D_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor head position of
the thickness sensor in the input unit of the POS input output unit"
65C0 0C2E_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the entry sensor head position in the
output unit of the POS input output unit
jamPosition_head.posIoUnit.outputUnit.entrySensor"
65C0 0C2F_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the rear load junction entry head
position"
65C0 0C30_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the rear load safe entry head position"
65C0 0C31_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the entry sensor head position in the
alignment unit of the transport unit"
65C0 0C32_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the exit sensor head position in the
alignment unit of the transport unit"
65C0 0C33_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the middle sensor head position in the
alignment unit of the transport unit"
65C0 0C34_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport unit head position Ps2"
65C0 0C35_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport unit head position Ps1"
65C0 0C36_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport unit head position Ps2"
65C0 0C37_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport unit head position Ps3"
65C0 0C38_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the entry sensor safe position in
ROLLER 1 of cash unit"
65C0 0C39_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the entry sensor safe position in
ROLLER 2 of cash unit"
65C0 0C3A_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the entry sensor safe position in
ROLLER 3 of cash unit"
65C0 0C3B_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the entry sensor safe position in
ROLLER 4 of cash unit"
65C0 0C3C_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the entry sensor safe position in
SINGLE UNIT SAFE 1 of cash unit"
65C0 0C3D_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the entry sensor safe position in
SINGLE UNIT SAFE 2 of cash unit"
65C0 0C3E_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the lower sensor safe position of in the
cash unit transport ROLLER 1 of cash unit"
65C0 0C3F_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the unit sensor safe position in the cash
unit transport ROLLER 1 of cash unit"
65C0 0C40_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the upper sensor safe position in the
cash unit transport ROLLER 1 of cash unit"
65C0 0C41_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the lower sensor safe position in the
cash unit transport ROLLER 2 of cash unit"
65C0 0C42_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the unit sensor safe position in the cash
unit transport ROLLER 2 of cash unit"
65C0 0C43_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the upper sensor safe position in the
cash unit transport ROLLER 2 of cash unit"
65C0 0C44_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the lower unit sensor safe position in the
cash unit transport ROLLER 3-ROLLER 4 of cash unit"
65C0 0C45_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor safe position in the
cash unit transport ROLLER 3- ROLLER 4 of cash unit"
65C0 0C46_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the upper unit sensor safe position in
the cash unit transport ROLLER 3- ROLLER 4 of cash unit"
65C0 0C47_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the entry sensor safe position in cash
unit transport TRIPLE UNIT COMPARTMENT 1-3 of cash unit"
65C0 0C48_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the entry sensor safe position in
ROLLER 1 of cash unit"
65C0 0C49_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the entry sensor safe position in
ROLLER 2 of cash unit"
65C0 0C4A_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the cassette entry sensor safe position
in the cash unit transport CASSETTE 1 of cash unit"

May 2011 367

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

65C0 0C4B_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor safe position in the
cash unit transport CASSETTE 2 of cash unit"
65C0 0C4C_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the cassette entry sensor safe position
in the cash unit transport cassette 2 of cash unit"
65C0 0C4D_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor safe position in the
cash unit transport CASSETTE 2 of cash unit"
65C0 0C4E_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the cassette entry sensor safe position
in the cash unit transport CASSETTE 3 of cash unit"
65C0 0C4F_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor safe position in the
cash unit transport CASSETTE 3 of cash unit"
65C0 0C50_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the cassette entry sensor safe position
in the cash unit transport CASSETTE 4 of cash unit"
65C0 0C51_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor safe position in the
cash unit transport CASSETTE 4 of cash unit"
65C0 0C52_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the cassette entry sensor safe position
in the cash unit transport CASSETTE 5 of cash unit"
65C0 0C53_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor safe position in the
cash unit transport CASSETTE 5 of cash unit"
65C0 0C54_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor 1 safe position in
the cash unit transport ROLLER 1 - ROLLER 2 of cash unit"
65C0 0C55_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor 2 safe position in
the cash unit transport ROLLER 1 - ROLLER 2 of cash unit"
65C0 0C56_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor 3 safe position in
the cash unit transport ROLLER 1 - ROLLER 2 of cash unit"
65C0 0C57_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the entry sensor safe position in
ROLLER 3 of cash unit"
65C0 0C58_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the entry sensor safe position in
ROLLER 4 of cash unit"
65C0 0C59_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the cassette entry sensor safe position
in cash unit transport cassette 1 of cash unit"
65C0 0C5A_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor safe position in
cash unit transport CASSETTE 1 of cash unit"
65C0 0C5B_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the cassette entry sensor safe position
in cash unit transport CASSETTE 2 of cash unit"
65C0 0C5C_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor safe position in
cash unit transport CASSETTE 2 of cash unit"
65C0 0C5D_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor 1 safe position in
the cash unit transport ROLLER 3 - ROLLER 4 of cash unit"
65C0 0C5E_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor 2 safe position in
the cash unit transport ROLLER 3 - ROLLER 4 of cash unit"
65C0 0C5F_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor 3 safe position in
the cash unit transport ROLLER 3 - ROLLER 4 of cash unit"
65C0 0C60_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor 4 safe position in
the cash unit transport ROLLER 3 - ROLLER 4 of cash unit"
65C0 0C61_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the cassette sensor safe position of the
distr. transport"
65C0 0C62_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the head sensor safe position of the
distr. transport"
65C0 0C63_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor safe position in the
thickness sensor of the distr. transport"
65C0 0C64_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the cassette sensor safe position in the
distr. transport desk"
65C0 0C65_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the head sensor safe position in the
distr. transport deskC"
65C0 0C66_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the lower cassette sensor safe position
in the distr. transport deskC"
65C0 0C67_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the reel storage sensor safe position in
the distr. transport deskC"
65C0 0C68_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor safe position in the
thickness sensor of the distr. transport deskC"
65C0 0C69_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the head CRS io unit collector"
65C0 0C6A_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the cassette entry sensor in the safe"
65C0 0C6B_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Jam in the transport sensor in the safe"
65C0 0CE4_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in head of ESCROW"
65C0 0CE5_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in head of the ATS input output
unit"
65C0 0CE6_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in head of the CRS input output
unit"
65C0 0CE7_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in head of the input unit of the
POS input output unit"
65C0 0CE8_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in head of the safety switch"

368 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

65C0 0CE9_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in head of the collector transport
open sensor of the transport unit"
65C0 0CEA_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in head of the lower transport
open sensor of the transport unit"
65C0 0CEB_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in head of the main transport open
sensor of the transport unit"
65C0 0CEC_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in head of the unlock switch"
65C0 0CED_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in safe of the cash unit transport
ROLLER 1 of cash unit"
65C0 0CEE_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in safe of the cash unit transport
ROLLER 2 of cash unit"
65C0 0CEF_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in safe of the cash unit transport
ROLLER 3 - ROLLER 4 of cash unit"
65C0 0CF0_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open Switch in safe of the cash unit transport
CASSETTE 1 of cash unit"
65C0 0CF1_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in safe of the cash unit transport
CASSETTE 2 of cash unit"
65C0 0CF2_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open Switch in safe of the cash unit transport
CASSETTE 3 of cash unit"
65C0 0CF3_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in safe of the cash unit transport
CASSETTE 4 of cash unit"
65C0 0CF4_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in safe of the cash unit transport
CASSETTE 5 of cash unit"
65C0 0CF5_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in safe of the cash unit transport
CASSETTE 1 of cash unit"
65C0 0CF6_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in safe of the cash unit tranport
CASSETTE 2 of cash unit"
65C0 0CF7_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in safe of the cash unit transport
ROLLER 3 - ROLLER 4 of cash unit"
65C0 0CF8_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in safe of the transport open
sensor of the distr. transport"
65C0 0CF9_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in safe of the cover locked sensor
of the distr. transport deskC"
65C0 0CFA_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in safe of the safety switch"
65C0 0CFB_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in safe of the shadow door
sensor"
65C0 0CFC_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in safe of the unlock switch sensor
of the distr. transport deskC"
65C0 0CFD_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in safe of the distr. transport
locked sensor of the distr. transport deskC"
65C0 0CFE_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in head of the escrow transport
open sensor of the transport unit"
65C0 0CFF_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Open switch in safe of the reject retract locked
sensor of the distr. transport"
65C0 0DAC_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the ESCROW"
65C0 0DAD_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the ESCROW's entry
sensor"
65C0 0DAE_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the SINGLE UNIT HEAD"
65C0 0DAF_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the entry sensor of the
SINGLE UNIT HEAD"
65C0 0DB0_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the ATS input output unit"
65C0 0DB1_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the clamp detector of the
ATS input output unit"
65C0 0DB2_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the dispenser of the ATS
input output unit"
65C0 0DB3_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the dispense sensor in
the dispenser of the ATS input output unit"
65C0 0DB4_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the dispense unit in the
dispenser of the ATS input output unit"
65C0 0DB5_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the input tray of the input
output unit"
65C0 0DB6_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the pressure unit in the
input tray of the ATS input output unit"
65C0 0DB7_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in the note detector of the ATS input
output unit"
65C0 0DB8_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the transport sensor in
the note detector of the ATS input output unit"
65C0 0DB9_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the output tray of the ATS
input output unit"
65C0 0DBA_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the entry sensor in the
output tray of the ATS input output unit"

May 2011 369

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

65C0 0DBB_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in the thickness sensor of the ATS
input output unit"
65C0 0DBC_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the transport sensor in
the thickness sensor of the ATS input output unit"
65C0 0DBD_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the BIM"
65C0 0DBE_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the CRS input output
module"
65C0 0DBF_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the clamp detector of the
CRS input output module"
65C0 0DC0_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the collector of the CRS
input output unit"
65C0 0DC1_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the entry sensor in the
collector of the CRS input output module"
65C0 0DC2_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the limited stepper
wrapper in the collector of the CRS input output module"
65C0 0DC3_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the pressure unit in the
collector of the CRS input output unit"
65C0 0DC4_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the transport belt in the
collector of the CRS input output unit"
65C0 0DC5_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the dispenser of the CRS
input output unit"
65C0 0DC6_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the dispense sensor in
the dispenser of the CRS input output unit"
65C0 0DC7_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the dispense unit in the
dispenser of the CRS input output unit"
65C0 0DC8_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the note detector of the
CRS input output unit"
65C0 0DC9_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the transport sensor in
the note detector of the CRS input output unit"
65C0 0DCA_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the thickness sensor of
the CRS input output unit"
65C0 0DCB_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the transport sensor in
the thickness sensor of the CRS input output unit"
65C0 0DCC_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the tray of the CRS input
output unit"
65C0 0DCD_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the pressure unit in the
tray of the CRS input output unit"
65C0 0DCE_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the docking transport"
65C0 0DCF_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the REPLENISH UNIT in
the docking transport"
65C0 0DD0_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the entry sensor in the
REPLENISH UNIT of the docking transport"
65C0 0DD1_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the unlock magnet of the
docking transport"
65C0 0DD2_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the controlled magnet of
the unlock magnet of the docking transport"
65C0 0DD3_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the docking transport
Ps1"
65C0 0DD4_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the docking transport
Ps2"
65C0 0DD5_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the docking transport
Ps3"
65C0 0DD6_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the front load junction
entry"
65C0 0DD7_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the front load safe entry"
65C0 0DD8_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the POS input output
unit"
65C0 0DD9_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the input unit of the POS
input output unit"
65C0 0DDA_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the clamp detector in the
in-output unit"
65C0 0DDB_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the dispense unit in the
in-output unit"
65C0 0DDC_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the input tray in the in-
output unit"
65C0 0DDD_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the note detector in the
in-output unit"
65C0 0DDE_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the transport sensor of
the note detector in the in-output unit"
65C0 0DDF_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the pressure unit in the
in-output unit"

370 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

65C0 0DE0_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the thickness sensor in
the in-output unit"
65C0 0DE1_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the transport sensor of
the thickness sensor in the in-output unit"
65C0 0DE2_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the output unit"
65C0 0DE3_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the entry sensor in the
output unit"
65C0 0DE4_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the rear load junction
entry"
65C0 0DE5_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the rear load safe entry"
65C0 0DE6_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the reject junctions drive"
65C0 0DE7_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the transport unit"
65C0 0DE8_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the alignment unit of the
transport unit"
65C0 0DE9_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the entry sensor in the
alignment unit of the transport unit"
65C0 0DEA_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in the head of the exit sensor in the
alignment unit of the transport unit"
65C0 0DEB_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the middle sensor in the
alignment unit of the transport unit"
65C0 0DEC_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the cash in junction of the
transport unit"
65C0 0DED_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the cash in junction
magnet in the transport unit"
65C0 0DEE_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the collector junction of
the transport unit"
65C0 0DEF_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the collector junction
magnet of the transport unit"
65C0 0DF0_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the docking unit junction
of the transport unit"
65C0 0DF1_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the docking unit junction
magnet of the transport unit"
65C0 0DF2_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the escrow junction of the
transport unit"
65C0 0DF3_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the escrow junction
magnet of the transport unit"
65C0 0DF4_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the head box junction of
the transport unit"
65C0 0DF5_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the head box junction
magnet of the transport unit"
65C0 0DF6_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the transport unit Ps1"
65C0 0DF7_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the transport unit Ps1"
65C0 0DF8_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the transport unit Ps2"
65C0 0DF9_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the transport unit Ps3"
65C0 0DFA_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the unfit junction of the
transport unit"
65C0 0DFB_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the unfit junction magnet
of the transport unit"
65C0 0DFC_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the cash unit string 1
ROLLER 1"
65C0 0DFD_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the entry sensor of the
cash unit string 1 ROLLER 1"
65C0 0DFE_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of cash unit string 2
ROLLER 2"
65C0 0DFF_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the entry sensor of the
cash unit string 1 ROLLER 2"
65C0 0E00_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of cash unit string 1
ROLLER 3"
65C0 0E01_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the entry sensor of the
cash unit string 1 ROLLER 3"
65C0 0E02_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the cash unit string 1
ROLLER 4"
65C0 0E03_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the entry sensor of the
cash unit string 1 ROLLER 4"
65C0 0E04_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the SINGLE UNIT SAFE
1 of cash unit"
65C0 0E05_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the entry sensor in the
SINGLE UNIT SAFE 1 of cash unit"
65C0 0E06_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the SINGLE UNIT SAFE
2 of cash unit"

May 2011 371

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

65C0 0E07_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the entry sensor in the
SINGLE UNIT SAFE 2 of cash unit"
65C0 0E08_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the TRIPLE UNIT
COMPARTMENT 1 of cash unit"
65C0 0E09_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the TRIPLE UNIT
COMPARTMENT 2 of cash unit"
65C0 0E0A_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the TRIPLE UNIT
COMPARTMENT 3 of cash unit"
65C0 0E0B_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: ROLLER1 Error state in safe of ROLLER 1 in
the cash unit transport of cash unit"
65C0 0E0C_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the lower sensor of
ROLLER 1 in the cash unit transport of cash unit"
65C0 0E0D_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the stepper junction of
ROLLER 1 in the cash unit transport of cash unit"
65C0 0E0E_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the unit sensor of
ROLLER 1 in the cash unit transport of cash unit"
65C0 0E0F_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the upper sensor of
ROLLER 1 in the cash unit transport of cash unit"
65C0 0E10_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the ROLLER 2 in the cash
unit transport of cash unit"
65C0 0E11_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the lower sensor of
ROLLER 2 in the cash unit transport of cash unit"
65C0 0E12_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the stepper junction of
ROLLER 2 in teh cash unit transport of cash unit"
65C0 0E13_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the unit sensor of
ROLLER 2 of the cash unit transport of cash unit"
65C0 0E14_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the upper sensor of
ROLLER 2 in the cash unit transport of cash unit"
65C0 0E15_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of ROLLER 3 - ROLLER 4
in the cash unit transport of cash unit"
65C0 0E16_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the junction of ROLLER 3
- ROLLER 4 in the cash unit transport of cash unit"
65C0 0E17_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the lower unit sensor of
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E18_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the magnet of ROLLER 3
- ROLLER 4 in the cash unit transport of cash unit"
65C0 0E19_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the transport sensor of
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E1A_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the upper unit sensor of
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E1B_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of TRIPLE UNIT
COMPARTMENT 1 - TRIPLE UNIT COMPARTMENT 2 - TRIPLE
UNIT COMPARTMENT 3 in the cash unit transport of cash unit"
65C0 0E1C_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the compartment 1
magnet of TRIPLE UNIT COMPARTMENT 1 - TRIPLE UNIT
COMPARTMENT 2 - TRIPLE UNIT COMPARTMENT 3 in the
cash unit transport of cash unit"
65C0 0E1D_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the entry sensor of
TRIPLE UNIT COMPARTMENT 1 - TRIPLE UNIT
COMPARTMENT 2 - TRIPLE UNIT COMPARTMENT 3 in the
cash unit transport of cash unit"
65C0 0E1E_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of CASSETTE 1 in cash unit"
65C0 0E1F_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of CASSETTE 2 in cash unit"
65C0 0E20_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of CASSETTE 3 in cash unit"
65C0 0E21_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of CASSETTE 4 in cash unit"
65C0 0E22_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of CASSETTE 5 in cash unit"
65C0 0E23_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of ROLLER 1 in cash unit"
65C0 0E24_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the entry sensor of
ROLLER 2 in cash unit"
65C0 0E25_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of ROLLER 2 in cash unit"
65C0 0E26_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the entry sensor of
ROLLER 2 in cash unit"
65C0 0E27_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of CASSETTE 1 in the cash
unit transport of cash unit"
65C0 0E28_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the cassette entry sensor
of CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E29_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the DC motor retreat plate
of CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E2A_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in the dispense unit of CASSETTE
1 in the cash unit transport of cash unit"

372 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

65C0 0E2B_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the junction of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E2C_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the junction magnet of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E2D_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the paddle bottom of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E2E_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the paddle top of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E2F_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the pressure unit of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E30_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error State in safe of the transport sensor of
CASSETTE 2 in cash unit transport of cash unit"
65C0 0E31_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of CASSETTE 2 in the cash
unit transport of cash unit string 2"
65C0 0E32_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the cassette entry sensor
of CASSETTE 2 in the cash unit transport of cash unit"
65C0 0E33_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the DC motor retreat plate
of CASSETTE 2 in the cash unit transport of cash unit"
65C0 0E34_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the dispense unit of
CASSETTE 2 in the cash unit transport of cash unit"
65C0 0E35_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the junction of
CASSETTE 2 in the cash unit transport of cash unit"
65C0 0E36_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the junction magnet of
CASSETTE 2 in the cash unit transport of cash unit"
65C0 0E37_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the paddle bottom of
CASSETTE 2 in teh cash unit transport of cash unit"
65C0 0E38_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the paddle top of
CASSETTE 2 in the cash unit transport of cash unit"
65C0 0E39_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the pressure unit of
CASSETTE 2 in the cash unit transport of cash unit"
65C0 0E3A_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the transport sensor of
CASSETTE 2 in the cash unit transport of cash unit"
65C0 0E3B_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of CASSETTE 3 in the cash
unit transport of cash unit"
65C0 0E3C_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the cassette entry sensor
of CASSETTE 3 in the cash unit transport of cash unit"
65C0 0E3D_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the DC motor retreat plate
of CASSETTE 3 in the cash unit transport of cash unit"
65C0 0E3E_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the dispense unit in
CASSETTE 3 in the cash unit transport of cash unit"
65C0 0E3F_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the junction of
CASSETTE 3 in the cash unit transport of cash unit"
65C0 0E40_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the junction magnet of
CASSETTE 3 in the cash unit transport of cash unit"
65C0 0E41_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the paddle bottom of
CASSETTE 3 in the cash unit transport of cash unit"
65C0 0E42_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the paddle top of
CASSETTE 3 in the cash unit transport of cash unit"
65C0 0E43_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the pressure unit of
CASSETTE 3 in the cash unit transport of cash unit"
65C0 0E44_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the transport sensor of
CASSETTE 3 in the cash unit transport of cash unit"
65C0 0E45_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of CASSETTE 4 in the cash
unit transport of cash unit"
65C0 0E46_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the cassette entry sensor
of CASSETTE 4 of the cash unit transport in cash unit"
65C0 0E47_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the DC motor retreat plate
of CASSETTE 4 in the cash unit transport of cash unit"
65C0 0E48_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the dispense unit of
CASSETTE 4 in the cash unit transport of cash unit"
65C0 0E49_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the junction of
CASSETTE 4 in the cash unit transport of cash unit"
65C0 0E4A_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the junction magnet of
CASSETTE 4 in the cash unit transport of cash unit"
65C0 0E4B_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the paddle bottom of
CASSETTE 4 in the cash unit transport of cash unit"
65C0 0E4C_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the paddle top of
CASSETTE 4 in the cash unit transport of cash unit"
65C0 0E4D_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the pressure unit of
CASSETTE 4 in the cash unit transport of cash unit"

May 2011 373

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

65C0 0E4E_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the transport sensor of
CASSETTE 4 in the cash unit transport of cash unit"
65C0 0E4F_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of CASSETTE 5 in the cash
unit transport of cash unit"
65C0 0E50_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the cassette entry sensor
of CASSETTE 5 in the cash unit transport of cash unit"
65C0 0E51_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the DC motor retreat plate
of CASSETTE 5 in the cash unit transport of cash unit "
65C0 0E52_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the dispense unit of
CASSETTE 5 in the cash unit transport of cash unit"
65C0 0E53_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the junction of
CASSETTE 5 in the cash unit transport of cash unit"
65C0 0E54_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the junction magnet of
CASSETTE 5 in the cash unit transport of cash unit"
65C0 0E55_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the paddle bottom of
CASSETTE 5 in the cash unit transport of cash unit"
65C0 0E56_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the paddle top of
CASSETTE 5 in the cash unit transport of cash unit"
65C0 0E57_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the pressure unit of
CASSETTE 5 in the cash unit transport of cash unit"
65C0 0E58_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the transport sensor of
CASSETTE 5 in the cash unit transport of cash unit"
65C0 0E59_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of ROLLER 1 - ROLLER 2
in the cash unit transport of the cash unit string"
65C0 0E5A_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the junction magnet of
ROLLER 1 - ROLLER 2 in the cash unit transport of cash unit"
65C0 0E5B_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the transport sensor 1 of
ROLLER 1 - ROLLER 2 in the cash unit transport of cash unit"
65C0 0E5C_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the transport sensor 2 of
ROLLER 1 - ROLLER 2 in the cash unit transport of cash unit"
65C0 0E5D_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the transport sensor 3 of
ROLLER 1 - ROLLER 2 in the cash unit transport of cash unit"
65C0 0E5E_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the upper junction of
ROLLER 1 - ROLLER 2 in the cash unit transport of cash unit"
65C0 0E5F_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of CASSETTE 1 in cash unit
string 3"
65C0 0E60_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of CASSETTE 2 in cash unit
string 3"
65C0 0E61_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of ROLLER 3 in cash unit 3"
65C0 0E62_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the entry sensor of
ROLLER 3 in cash unit"
65C0 0E63_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the ROLLER 4 if cash
unit"
65C0 0E64_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the entry sensor of
ROLLER 4 in cash unit"
65C0 0E65_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of CASSETTE 1 in the cash
unit transport of cash unit"
65C0 0E66_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the cassette entry sensor
of CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E67_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the DC motor retreat plate
of CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E68_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the dispense unit of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E69_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the junction of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E6A_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the junction magnet of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E6B_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the paddle bottom of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E6C_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the paddle top of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E6D_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the pressure unit of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E6E_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the transport sensor of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E6F_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error in state of CASSETTE 2 in the cash unit
transport of cash unit string 3"
65C0 0E70_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the cassette entry sensor
of CASSETTE 2 in the cash unit transport of cash unit string 3"
65C0 0E71_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the DC motor retreat plate
of CASSETTE 2 in the cash unit transport of cash unit string 3"

374 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

65C0 0E72_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the dispense unit of
CASSETTE 2 in the cash unit transport of cash unit string 3"
65C0 0E73_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the junction of
CASSETTE 2 in the cash unit transport of cash unit string 3"
65C0 0E74_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the junction magnet of
CASSETTE 2 in the cash unit transport of cash unit string 3"
65C0 0E75_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the paddle bottom of
CASSETTE 2 in the cash unit transport of cash unit string 3"
65C0 0E76_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the paddle top of
CASSETTE 2 in the cash unit transport of cash unit string 3"
65C0 0E77_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the presssure unit of
CASSETTE 2 in the cash unit transport of cash unit string 3"
65C0 0E78_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the transport sensor of
CASSETTE 2 in the cash unit transport of cash unit string 3"
65C0 0E79_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of ROLLER 3 - ROLLER 4
in the cash unit transport of cash unit"
65C0 0E7A_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the lower junction of
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E7B_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the lower junction single
magnet of ROLLER 3 - ROLLER 4 in the cash unit transport of
cash unit"
65C0 0E7C_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the lower junction twin
magnet of ROLLER 3 - ROLLER 4 in the cash unit transport of
cash unit"
65C0 0E7D_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the transport sensor 1 of
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E7E_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the transport sensor 2 of
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E7F_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the transport sensor 3 of
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E80_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the transport sensor of 4
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E81_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the upper junction of
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E82_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the upper junction single
magnet of ROLLER 3 - ROLLER 4 in the cash unit transport of
cash unit"
65C0 0E83_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error in safe of the upper junction twin magnet
of ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E84_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the distr. transport"
65C0 0E85_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the cassette sensor if the
distr. transport"
65C0 0E86_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the head sensor of the
distr. transport"
65C0 0E87_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the reject junction magnet
of the distr. transport"
65C0 0E88_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the retract junction
magnet in the distr. transport"
65C0 0E89_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the thickness sensor of
the distr. transport"
65C0 0E8A_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the transport sensor in the
thickness sensor of the distr. transport"
65C0 0E8B_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the distr. transport deskC"
65C0 0E8C_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the cassette sensor of the
distr. transport deskC"
65C0 0E8D_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the head sensor of the
distr. transport deskC"
65C0 0E8E_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the lower box junction of
the distr. transport deskC"
65C0 0E8F_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: e Error state in safe of the lower box junction
magnet of the distr. transport deskC"
65C0 0E90_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the lower cassette sensor
of the distr. transport deskC"
65C0 0E91_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the reel storage sensor of
the distr. transport deskC"
65C0 0E92_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the thickness sensor of
the distr. transport deskC"
65C0 0E93_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the transport sensor in the
thickness sensor of the distr. transport deskC"
65C0 0E94_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the the triple junction of
the distr. transport deskC"

May 2011 375

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

65C0 0E95_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the triple junction single
magnet of the distr. transport deskC"
65C0 0E96_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the triple junction twin
magnet of the distr. transport deskC"
65C0 0E97_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the upper box junction of
the distr. transport deskC"
65C0 0E98_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the upper box junction
magnet of the distr. transport deskC"
65C0 0E99_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the generic distr.
transport"
65C0 0E9A_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of cassette 3"
65C0 0E9B_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the cash unit transport
paddle bottom"
65C0 0E9C_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the cash unit transport
paddle top"
65C0 0E9D_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in head of the bim transport unit"
65C0 0E9E_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the cash unit transport
pressure unit"
65C0 0E9F_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the cash unit transport
motor retreat plate"
65C0 0EA0_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the cash unit transport
junction magnet"
65C0 0EA1_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the cash unit transport
cassette entry sensor"
65C0 0EA2_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the cash unit transport
sensor"
65C0 0EA3_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the cash unit transport
dispense unit"
65C0 0EA4_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the cash unit transport
cassette 3"
65C0 0EA5_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in safe of the cash unit transport
junction"
65C0 0EA6_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state of the RM3 system"
65C0 0EA7_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: Error state in cash unit transport of triple
compartment magnet"
65C0 0FA0_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: unknown configuration error"
65C0 1388_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: logically unknown logical error"
65C0 1389_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: logically no notes detected"
65C0 138A_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: logical error: escrow full"
65C0 138B_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: logical error: customer cash-in limit reached"
65C0 138C_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: logical error: device cash-in capacity reached"
65C0 138D_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: logical error: separation not possible from input
tray"
65C0 138E_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: logical error: foreign material detected"
65C0 138F_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: logical error: notes inserted, short side first"
65C0 1390_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: logical error: shutter blocked"
65C0 1391_E ?0782 80000000000000000 000DI01:3D:37:38 "CASHOUT RM3: logical error: retract not possible because all
retract destinations full"
65C0 1393_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: cassette 1 unexpectedly empty"
7
65C0 1394_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: cassette 2 unexpectedly empty"
7
65C0 1395_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: cassette 3 unexpectedly empty"
7
65C0 1396_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: cassette 4 unexpectedly empty"
7
65C0 1397_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: cassette 5 unexpectedly empty"
7
65C0 1398_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: cassette 6 unexpectedly empty"
7
65C0 1399_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: cassette 7 unexpectedly empty"
7
65C0 139A_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: cassette 8 unexpectedly empty"
7
65C0 139D_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: roller 1 unexpectedly empty"
7
65C0 139E_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: roller 2 unexpectedly empty"
7
65C0 139F_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: roller 3 unexpectedly empty"
7

376 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

65C0 13A0_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: roller 4 unexpectedly empty"
7
65C0 13A1_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: roller 5 unexpectedly empty"
7
65C0 13A2_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: roller 6 unexpectedly empty"
7
65C0 13A3_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: roller 7 unexpectedly empty"
7
65C0 13A4_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: roller 8 unexpectedly empty"
7
65C0 13A5_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: logical error: replenish unit 1 unexpected"
65C0 13A7_E ?0402 80000000000000000 000DI01:3F:34:30 "CASHOUT RM3: logical error: too many rejects from cassette 1"
65C0 13A8_E ?0402 80000000000000000 000DI01:3F:34:30 "CASHOUT RM3: logical error: too many rejects from cassette 2"
65C0 13A9_E ?0402 80000000000000000 000DI01:3F:34:30 "CASHOUT RM3: logical error: too many rejects from cassette 3"
65C0 13AA_E ?0402 80000000000000000 000DI01:3F:34:30 "CASHOUT RM3: logical error: too many rejects from cassette 4"
65C0 13AB_E ?0402 80000000000000000 000DI01:3F:34:30 "CASHOUT RM3: logical error: too many rejects from cassette 5"
65C0 13AC_E ?0402 80000000000000000 000DI01:3F:34:30 "CASHOUT RM3: logical error: too many rejects from cassette 6"
65C0 13AD_E ?0402 80000000000000000 000DI01:3F:34:30 "CASHOUT RM3: logical error: too many rejects from cassette 7"
65C0 13AE_E ?0402 80000000000000000 000DI01:3F:34:30 "CASHOUT RM3: logical error: too many rejects from cassette 8"
65C0 13B1_E ?0402 80000000000000000 000DI01:3F:34:30 "CASHOUT RM3: logical error: too many rejects from roller 1"
65C0 13B2_E ?0402 80000000000000000 000DI01:3F:34:30 "CASHOUT RM3: logical error: too many rejects from roller 2"
65C0 13B3_E ?0402 80000000000000000 000DI01:3F:34:30 "CASHOUT RM3: logical error: too many rejects from roller 3"
65C0 13B4_E ?0402 80000000000000000 000DI01:3F:34:30 "CASHOUT RM3: logical error: too many rejects from roller 4"
65C0 13B5_E ?0402 80000000000000000 000DI01:3F:34:30 "CASHOUT RM3: logical error: too many rejects from roller 5"
65C0 13B6_E ?0402 80000000000000000 000DI01:3F:34:30 "CASHOUT RM3: logical error: too many rejects from roller 6"
65C0 13B7_E ?0402 80000000000000000 000DI01:3F:34:30 "CASHOUT RM3: logical error: too many rejects from roller 7"
65C0 13B8_E ?0402 80000000000000000 000DI01:3F:34:30 "CASHOUT RM3: logical error: too many rejects from roller 8"
65C0 13BB_E ?0A12 80000000000000000 000DI01:3F:30p3 "CASHOUT RM3: logical error: unexpected note from cassette 1"
1
65C0 13BC_E ?0A12 80000000000000000 000DI01:3F:30p3 "CASHOUT RM3: logical error: unexpected note from cassette 2"
1
65C0 13BD_E ?0A12 80000000000000000 000DI01:3F:30p3 "CASHOUT RM3: logical error: unexpected note from cassette 3"
1
65C0 13BE_E ?0A12 80000000000000000 000DI01:3F:30p3 "CASHOUT RM3: logical error: unexpected note from cassette 4"
1
65C0 13BF_E ?0A12 80000000000000000 000DI01:3F:30p3 "CASHOUT RM3: logical error: unexpected note from cassette 5"
1
65C0 13C0_E ?0A12 80000000000000000 000DI01:3F:30p3 "CASHOUT RM3: logical error: unexpected note from cassette 6"
1
65C0 13C1_E ?0A12 80000000000000000 000DI01:3F:30p3 "CASHOUT RM3: logical error: unexpected note from cassette 7"
1
65C0 13C2_E ?0A12 80000000000000000 000DI01:3F:30p3 "CASHOUT RM3: logical error: unexpected note from cassette 8"
1
65C0 13C5_E ?0A12 80000000000000000 000DI01:3F:30p3 "CASHOUT RM3: logical error: unexpected note from roller 1"
1
65C0 13C6_E ?0A12 80000000000000000 000DI01:3F:30p3 "CASHOUT RM3: logical error: unexpected note from roller 2"
1
65C0 13C7_E ?0A12 80000000000000000 000DI01:3F:30p3 "CASHOUT RM3: logical error: unexpected note from roller 3"
1
65C0 13C8_E ?0A12 80000000000000000 000DI01:3F:30p3 "CASHOUT RM3: logical error: unexpected note from roller 4"
1
65C0 13C9_E ?0A12 80000000000000000 000DI01:3F:30p3 "CASHOUT RM3: logical error: unexpected note from roller 5"
1
65C0 13CA_E ?0A12 80000000000000000 000DI01:3F:30p3 "CASHOUT RM3: logical error: unexpected note from roller 6"
1
65C0 13CB_E ?0A12 80000000000000000 000DI01:3F:30p3 "CASHOUT RM3: logical error: unexpected note from roller 7"
1
65C0 13CC_E ?0A12 80000000000000000 000DI01:3F:30p3 "CASHOUT RM3: logical error: unexpected note from roller 8"
1
65C0 13CF_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: inseparable items in cassette 1"
7
65C0 13D0_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: inseparable items in cassette 2"
7
65C0 13D1_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: inseparable items in cassette 3"
7
65C0 13D2_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: inseparable items in cassette 4"
7
65C0 13D3_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: inseparable items in cassette 5"
7

May 2011 377

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

65C0 13D4_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: inseparable items in cassette 6"
7
65C0 13D5_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: inseparable items in cassette 7"
7
65C0 13D6_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: inseparable items in cassette 8"
7
65C0 13D9_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: inseparable items in roller 1"
7
65C0 13DA_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: inseparable items in roller 2"
7
65C0 13DB_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: inseparable items in roller 3"
7
65C0 13DC_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: inseparable items in roller 4"
7
65C0 13DD_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: inseparable items in roller 5"
7
65C0 13DE_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: inseparable items in roller 6"
7
65C0 13DF_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: inseparable items in roller 7"
7
65C0 13E0_E ?0B75 80000000000000000 000DI01:3F:31p3 "CASHOUT RM3: logical error: inseparable items in roller 8"
7
65C0 13E1_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: logical error: the needed destination ran full"
65C0 13E2_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: logical error: replenish unit is needed but
missing"
65C0 13E3_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: logical error: inserted bundle is too long"
65C0 13E4_E ?0912 80000000000000000 000DI01:38:39:31 "CASHOUT RM3: logical error: inserted bundle is too thick"

378 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

RM3 (CINEO series) errors (Class: 65C0_CIN)

The following table lists the CashIn M-Status and M-Data codes assigned to the
recycling module RM3 used in Wincor Nixdorf Cineo systems.

Table 98: RM3 (Cineo series) errors (class: 65c0_CIN)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
65C0 DEFA_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: DEFAULT_ERROR"
65C0 DEFA_W A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: DEFAULT_WARNING"
65C0 0001_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Unknown general error"
65C0 03E8_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Unknown IO error"
65C0 03E9_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Checksum error"
65C0 03EA_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Communication error"
65C0 03EB_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Unsupported function"
65C0 044C_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Unknown USB error"
65C0 044D_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: USB error 1"
65C0 04B0_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Unknown secure channel error"
65C0 04B1_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Secure channel error 1"
65C0 04B2_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Secure channel error 2"
65C0 04B3_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Secure channel error 3"
65C0 04B4_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Secure channel error 4"
65C0 04B5_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Secure channel error 5"
65C0 04B6_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Secure channel error 6"
65C0 04B7_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Secure channel error 7"
65C0 04B8_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Secure channel error 8"
65C0 04B9_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Secure channel error 9"
65C0 04BA_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Secure channel error 10"
65C0 04BB_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Secure channel error 11"
65C0 04BC_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Secure channel error 12"
65C0 04BD_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Secure channel error 13"
65C0 07D0_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Unknown context error"
65C0 09C4_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: CASHIN operating needed"
65C0 09C5_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: CASHIN configuration needed"
65C0 0A28_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: CashIn operating needed"
65C0 0A29_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: CashIn configuration needed"
65C0 0BB8_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Unknown hardware error"
65C0 0BB9_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Defect module fatal"
65C0 0BBA_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Defect CRS collector blocked"
65C0 0BBB_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Defect uncalibrated sensors"
65C0 0BBC_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Defect manual device check needed"
65C0 0BBD_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Defect CRS io unit note jam"
65C0 0BBE_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Defect fatal motor overcurrent"
65C0 0C1C_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the entry sensor head position of the ESCROW"
65C0 0C1D_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the entry sensor head position of the single unit
head"
65C0 0C1E_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the dispense sensor head position of the ATS
input output unit's dispenser"
65C0 0C1F_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor head position of the ATS input
output unit's note detector"
65C0 0C20_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the entry sensor head position of the ATS input
output unit's output tray"
65C0 0C21_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor head position of the ATS input
output unit's thickness sensor"
65C0 0C22_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the entry sensor head position of the CRS input
output unit's collector"
65C0 0C23_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the dispense Sensor head position of the CRS
input output unit's dispenser"
65C0 0C24_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor head position of the CRS
input output unit's note detector"
65C0 0C25_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor head position of the thickness
sensor in the CRS input output unit"

May 2011 379

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

65C0 0C26_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the entry sensor head position of the docking
transport in the replenish unit"
65C0 0C27_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the docking transport head position Ps1"
65C0 0C28_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the docking transport head position Ps2"
65C0 0C29_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the docking transport head position Ps3"
65C0 0C2A_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the head position of the front load junction entry. "
65C0 0C2B_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the head position of the front load safe entry"
65C0 0C2C_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor head position of the note
detector in the input unit of the POS input output unit"
65C0 0C2D_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor head position of the thickness
sensor in the input unit of the POS input output unit"
65C0 0C2E_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the entry sensor head position in the output unit of
the POS input output unit jamPosition_head.posIoUnit.outputUnit.entry-
Sensor"
65C0 0C2F_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the rear load junction entry head position"
65C0 0C30_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the rear load safe entry head position"
65C0 0C31_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the entry sensor head position in the alignment
unit of the transport unit"
65C0 0C32_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the exit sensor head position in the alignment unit
of the transport unit"
65C0 0C33_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the middle sensor head position in the alignment
unit of the transport unit"
65C0 0C34_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport unit head position Ps2"
65C0 0C35_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport unit head position Ps1"
65C0 0C36_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport unit head position Ps2"
65C0 0C37_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport unit head position Ps3"
65C0 0C38_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the entry sensor safe position in ROLLER 1 of
cash unit"
65C0 0C39_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the entry sensor safe position in ROLLER 2 of
cash unit"
65C0 0C3A_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the entry sensor safe position in ROLLER 3 of
cash unit"
65C0 0C3B_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the entry sensor safe position in ROLLER 4 of
cash unit"
65C0 0C3C_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the entry sensor safe position in SINGLE UNIT
SAFE 1 of cash unit"
65C0 0C3D_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the entry sensor safe position in SINGLE UNIT
SAFE 2 of cash unit"
65C0 0C3E_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the lower sensor safe position of in the cash unit
transport ROLLER 1 of cash unit"
65C0 0C3F_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the unit sensor safe position in the cash unit
transport ROLLER 1 of cash unit"
65C0 0C40_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the upper sensor safe position in the cash unit
transport ROLLER 1 of cash unit"
65C0 0C41_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the lower sensor safe position in the cash unit
transport ROLLER 2 of cash unit"
65C0 0C42_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the unit sensor safe position in the cash unit
transport ROLLER 2 of cash unit"
65C0 0C43_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the upper sensor safe position in the cash unit
transport ROLLER 2 of cash unit"
65C0 0C44_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the lower unit sensor safe position in the cash unit
transport ROLLER 3-ROLLER 4 of cash unit"
65C0 0C45_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor safe position in the cash unit
transport ROLLER 3- ROLLER 4 of cash unit"
65C0 0C46_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the upper unit sensor safe position in the cash unit
transport ROLLER 3- ROLLER 4 of cash unit"
65C0 0C47_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the entry sensor safe position in cash unit
transport TRIPLE UNIT COMPARTMENT 1-3 of cash unit"
65C0 0C48_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the entry sensor safe position in ROLLER 1 of
cash unit"
65C0 0C49_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the entry sensor safe position in ROLLER 2 of
cash unit"
65C0 0C4A_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the cassette entry sensor safe position in the cash
unit transport CASSETTE 1 of cash unit"
65C0 0C4B_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor safe position in the cash unit
transport CASSETTE 2 of cash unit"
65C0 0C4C_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the cassette entry sensor safe position in the cash
unit transport cassette 2 of cash unit"
65C0 0C4D_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor safe position in the cash unit
transport CASSETTE 2 of cash unit"

380 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

65C0 0C4E_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the cassette entry sensor safe position in the cash
unit transport CASSETTE 3 of cash unit"
65C0 0C4F_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor safe position in the cash unit
transport CASSETTE 3 of cash unit"
65C0 0C50_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the cassette entry sensor safe position in the cash
unit transport CASSETTE 4 of cash unit"
65C0 0C51_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor safe position in the cash unit
transport CASSETTE 4 of cash unit"
65C0 0C52_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the cassette entry sensor safe position in the cash
unit transport CASSETTE 5 of cash unit"
65C0 0C53_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor safe position in the cash unit
transport CASSETTE 5 of cash unit"
65C0 0C54_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor 1 safe position in the cash
unit transport ROLLER 1 - ROLLER 2 of cash unit"
65C0 0C55_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor 2 safe position in the cash
unit transport ROLLER 1 - ROLLER 2 of cash unit"
65C0 0C56_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor 3 safe position in the cash
unit transport ROLLER 1 - ROLLER 2 of cash unit"
65C0 0C57_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the entry sensor safe position in ROLLER 3 of
cash unit"
65C0 0C58_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the entry sensor safe position in ROLLER 4 of
cash unit"
65C0 0C59_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the cassette entry sensor safe position in cash unit
transport cassette 1 of cash unit"
65C0 0C5A_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor safe position in cash unit
transport CASSETTE 1 of cash unit"
65C0 0C5B_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the cassette entry sensor safe position in cash unit
transport CASSETTE 2 of cash unit"
65C0 0C5C_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor safe position in cash unit
transport CASSETTE 2 of cash unit"
65C0 0C5D_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor 1 safe position in the cash
unit transport ROLLER 3 - ROLLER 4 of cash unit"
65C0 0C5E_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor 2 safe position in the cash
unit transport ROLLER 3 - ROLLER 4 of cash unit"
65C0 0C5F_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor 3 safe position in the cash
unit transport ROLLER 3 - ROLLER 4 of cash unit"
65C0 0C60_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor 4 safe position in the cash
unit transport ROLLER 3 - ROLLER 4 of cash unit"
65C0 0C61_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the cassette sensor safe position of the distr.
transport"
65C0 0C62_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the head sensor safe position of the distr.
transport"
65C0 0C63_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor safe position in the thickness
sensor of the distr. transport"
65C0 0C64_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the cassette sensor safe position in the distr.
transport desk"
65C0 0C65_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the head sensor safe position in the distr. transport
deskC"
65C0 0C66_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the lower cassette sensor safe position in the distr.
transport deskC"
65C0 0C67_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the reel storage sensor safe position in the distr.
transport deskC"
65C0 0C68_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor safe position in the thickness
sensor of the distr. transport deskC"
65C0 0C69_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the head CRS io unit collector"
65C0 0C6A_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the cassette entry sensor in the safe"
65C0 0C6B_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Jam in the transport sensor in the safe"
65C0 0CE4_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in head of ESCROW"
65C0 0CE5_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in head of the ATS input output unit"
65C0 0CE6_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in head of the CRS input output unit"
65C0 0CE7_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in head of the input unit of the POS input
output unit"
65C0 0CE8_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in head of the safety switch"
65C0 0CE9_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in head of the collector transport open
sensor of the transport unit"
65C0 0CEA_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in head of the lower transport open sensor
of the transport unit"
65C0 0CEB_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in head of the main transport open sensor of
the transport unit"
65C0 0CEC_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in head of the unlock switch"

May 2011 381

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

65C0 0CED_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in safe of the cash unit transport ROLLER 1
of cash unit"
65C0 0CEE_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in safe of the cash unit transport ROLLER 2
of cash unit"
65C0 0CEF_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in safe of the cash unit transport ROLLER 3
- ROLLER 4 of cash unit"
65C0 0CF0_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open Switch in safe of the cash unit transport
CASSETTE 1 of cash unit"
65C0 0CF1_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in safe of the cash unit transport CASSETTE
2 of cash unit"
65C0 0CF2_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open Switch in safe of the cash unit transport
CASSETTE 3 of cash unit"
65C0 0CF3_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in safe of the cash unit transport CASSETTE
4 of cash unit"
65C0 0CF4_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in safe of the cash unit transport CASSETTE
5 of cash unit"
65C0 0CF5_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in safe of the cash unit transport CASSETTE
1 of cash unit"
65C0 0CF6_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in safe of the cash unit tranport CASSETTE
2 of cash unit"
65C0 0CF7_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in safe of the cash unit transport ROLLER 3
- ROLLER 4 of cash unit"
65C0 0CF8_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in safe of the transport open sensor of the
distr. transport"
65C0 0CF9_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in safe of the cover locked sensor of the
distr. transport deskC"
65C0 0CFA_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in safe of the safety switch"
65C0 0CFB_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in safe of the shadow door sensor"
65C0 0CFC_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in safe of the unlock switch sensor of the
distr. transport deskC"
65C0 0CFD_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in safe of the distr. transport locked sensor
of the distr. transport deskC"
65C0 0CFE_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in head of the escrow transport open sensor
of the transport unit"
65C0 0CFF_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Open switch in safe of the reject retract locked sensor of
the distr. transport"
65C0 0DAC_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the ESCROW"
65C0 0DAD_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the ESCROW's entry sensor"
65C0 0DAE_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the SINGLE UNIT HEAD"
65C0 0DAF_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the entry sensor of the SINGLE
UNIT HEAD"
65C0 0DB0_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the ATS input output unit"
65C0 0DB1_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the clamp detector of the ATS input
output unit"
65C0 0DB2_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the dispenser of the ATS input
output unit"
65C0 0DB3_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the dispense sensor in the
dispenser of the ATS input output unit"
65C0 0DB4_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the dispense unit in the dispenser
of the ATS input output unit"
65C0 0DB5_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the input tray of the input output
unit"
65C0 0DB6_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the pressure unit in the input tray of
the ATS input output unit"
65C0 0DB7_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in the note detector of the ATS input output
unit"
65C0 0DB8_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the transport sensor in the note
detector of the ATS input output unit"
65C0 0DB9_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the output tray of the ATS input
output unit"
65C0 0DBA_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the entry sensor in the output tray
of the ATS input output unit"
65C0 0DBB_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in the thickness sensor of the ATS input output
unit"
65C0 0DBC_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the transport sensor in the thickness
sensor of the ATS input output unit"
65C0 0DBD_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the BIM"
65C0 0DBE_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the CRS input output module"
65C0 0DBF_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the clamp detector of the CRS input
output module"

382 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

65C0 0DC0_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the collector of the CRS input output
unit"
65C0 0DC1_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the entry sensor in the collector of
the CRS input output module"
65C0 0DC2_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the limited stepper wrapper in the
collector of the CRS input output module"
65C0 0DC3_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the pressure unit in the collector of
the CRS input output unit"
65C0 0DC4_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the transport belt in the collector of
the CRS input output unit"
65C0 0DC5_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the dispenser of the CRS input
output unit"
65C0 0DC6_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the dispense sensor in the
dispenser of the CRS input output unit"
65C0 0DC7_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the dispense unit in the dispenser
of the CRS input output unit"
65C0 0DC8_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the note detector of the CRS input
output unit"
65C0 0DC9_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the transport sensor in the note
detector of the CRS input output unit"
65C0 0DCA_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the thickness sensor of the CRS
input output unit"
65C0 0DCB_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the transport sensor in the thickness
sensor of the CRS input output unit"
65C0 0DCC_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the tray of the CRS input output unit"
65C0 0DCD_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the pressure unit in the tray of the
CRS input output unit"
65C0 0DCE_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the docking transport"
65C0 0DCF_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the REPLENISH UNIT in the
docking transport"
65C0 0DD0_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the entry sensor in the REPLENISH
UNIT of the docking transport"
65C0 0DD1_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the unlock magnet of the docking
transport"
65C0 0DD2_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the controlled magnet of the unlock
magnet of the docking transport"
65C0 0DD3_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the docking transport Ps1"
65C0 0DD4_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the docking transport Ps2"
65C0 0DD5_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the docking transport Ps3"
65C0 0DD6_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the front load junction entry"
65C0 0DD7_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the front load safe entry"
65C0 0DD8_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the POS input output unit"
65C0 0DD9_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the input unit of the POS input
output unit"
65C0 0DDA_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the clamp detector in the in-output
unit"
65C0 0DDB_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the dispense unit in the in-output
unit"
65C0 0DDC_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the input tray in the in-output unit"
65C0 0DDD_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the note detector in the in-output
unit"
65C0 0DDE_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the transport sensor of the note
detector in the in-output unit"
65C0 0DDF_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the pressure unit in the in-output
unit"
65C0 0DE0_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the thickness sensor in the in-output
unit"
65C0 0DE1_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the transport sensor of the thickness
sensor in the in-output unit"
65C0 0DE2_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the output unit"
65C0 0DE3_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the entry sensor in the output unit"
65C0 0DE4_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the rear load junction entry"
65C0 0DE5_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the rear load safe entry"
65C0 0DE6_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the reject junctions drive"
65C0 0DE7_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the transport unit"
65C0 0DE8_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the alignment unit of the transport
unit"
65C0 0DE9_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the entry sensor in the alignment
unit of the transport unit"

May 2011 383

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

65C0 0DEA_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in the head of the exit sensor in the alignment
unit of the transport unit"
65C0 0DEB_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the middle sensor in the alignment
unit of the transport unit"
65C0 0DEC_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the cash in junction of the transport
unit"
65C0 0DED_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the cash in junction magnet in the
transport unit"
65C0 0DEE_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the collector junction of the transport
unit"
65C0 0DEF_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the collector junction magnet of the
transport unit"
65C0 0DF0_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the docking unit junction of the
transport unit"
65C0 0DF1_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the docking unit junction magnet of
the transport unit"
65C0 0DF2_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the escrow junction of the transport
unit"
65C0 0DF3_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the escrow junction magnet of the
transport unit"
65C0 0DF4_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the head box junction of the
transport unit"
65C0 0DF5_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the head box junction magnet of the
transport unit"
65C0 0DF6_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the transport unit Ps1"
65C0 0DF7_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the transport unit Ps1"
65C0 0DF8_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the transport unit Ps2"
65C0 0DF9_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the transport unit Ps3"
65C0 0DFA_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the unfit junction of the transport
unit"
65C0 0DFB_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the unfit junction magnet of the
transport unit"
65C0 0DFC_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the cash unit string 1 ROLLER 1"
65C0 0DFD_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the entry sensor of the cash unit
string 1 ROLLER 1"
65C0 0DFE_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of cash unit string 2 ROLLER 2"
65C0 0DFF_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the entry sensor of the cash unit
string 1 ROLLER 2"
65C0 0E00_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of cash unit string 1 ROLLER 3"
65C0 0E01_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the entry sensor of the cash unit
string 1 ROLLER 3"
65C0 0E02_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the cash unit string 1 ROLLER 4"
65C0 0E03_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the entry sensor of the cash unit
string 1 ROLLER 4"
65C0 0E04_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the SINGLE UNIT SAFE 1 of cash
unit"
65C0 0E05_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the entry sensor in the SINGLE UNIT
SAFE 1 of cash unit"
65C0 0E06_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the SINGLE UNIT SAFE 2 of cash
unit"
65C0 0E07_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the entry sensor in the SINGLE UNIT
SAFE 2 of cash unit"
65C0 0E08_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the TRIPLE UNIT COMPARTMENT
1 of cash unit"
65C0 0E09_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the TRIPLE UNIT COMPARTMENT
2 of cash unit"
65C0 0E0A_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the TRIPLE UNIT COMPARTMENT
3 of cash unit"
65C0 0E0B_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: ROLLER1 Error state in safe of ROLLER 1 in the cash
unit transport of cash unit"
65C0 0E0C_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the lower sensor of ROLLER 1 in the
cash unit transport of cash unit"
65C0 0E0D_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the stepper junction of ROLLER 1 in
the cash unit transport of cash unit"
65C0 0E0E_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the unit sensor of ROLLER 1 in the
cash unit transport of cash unit"
65C0 0E0F_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the upper sensor of ROLLER 1 in the
cash unit transport of cash unit"
65C0 0E10_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the ROLLER 2 in the cash unit
transport of cash unit"

384 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

65C0 0E11_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the lower sensor of ROLLER 2 in the
cash unit transport of cash unit"
65C0 0E12_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the stepper junction of ROLLER 2 in
teh cash unit transport of cash unit"
65C0 0E13_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the unit sensor of ROLLER 2 of the
cash unit transport of cash unit"
65C0 0E14_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the upper sensor of ROLLER 2 in the
cash unit transport of cash unit"
65C0 0E15_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of ROLLER 3 - ROLLER 4 in the cash
unit transport of cash unit"
65C0 0E16_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the junction of ROLLER 3 - ROLLER
4 in the cash unit transport of cash unit"
65C0 0E17_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the lower unit sensor of ROLLER 3
- ROLLER 4 in the cash unit transport of cash unit"
65C0 0E18_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the magnet of ROLLER 3 - ROLLER
4 in the cash unit transport of cash unit"
65C0 0E19_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the transport sensor of ROLLER 3 -
ROLLER 4 in the cash unit transport of cash unit"
65C0 0E1A_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the upper unit sensor of ROLLER 3
- ROLLER 4 in the cash unit transport of cash unit"
65C0 0E1B_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of TRIPLE UNIT COMPARTMENT 1 -
TRIPLE UNIT COMPARTMENT 2 - TRIPLE UNIT COMPARTMENT 3 in
the cash unit transport of cash unit"
65C0 0E1C_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the compartment 1 magnet of
TRIPLE UNIT COMPARTMENT 1 - TRIPLE UNIT COMPARTMENT 2 -
TRIPLE UNIT COMPARTMENT 3 in the cash unit transport of cash unit"
65C0 0E1D_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the entry sensor of TRIPLE UNIT
COMPARTMENT 1 - TRIPLE UNIT COMPARTMENT 2 - TRIPLE UNIT
COMPARTMENT 3 in the cash unit transport of cash unit"
65C0 0E1E_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of CASSETTE 1 in cash unit"
65C0 0E1F_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of CASSETTE 2 in cash unit"
65C0 0E20_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of CASSETTE 3 in cash unit"
65C0 0E21_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of CASSETTE 4 in cash unit"
65C0 0E22_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of CASSETTE 5 in cash unit"
65C0 0E23_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of ROLLER 1 in cash unit"
65C0 0E24_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the entry sensor of ROLLER 2 in
cash unit"
65C0 0E25_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of ROLLER 2 in cash unit"
65C0 0E26_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the entry sensor of ROLLER 2 in
cash unit"
65C0 0E27_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of CASSETTE 1 in the cash unit
transport of cash unit"
65C0 0E28_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the cassette entry sensor of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E29_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the DC motor retreat plate of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E2A_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in the dispense unit of CASSETTE 1 in the
cash unit transport of cash unit"
65C0 0E2B_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the junction of CASSETTE 1 in the
cash unit transport of cash unit"
65C0 0E2C_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the junction magnet of CASSETTE
1 in the cash unit transport of cash unit"
65C0 0E2D_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the paddle bottom of CASSETTE 1
in the cash unit transport of cash unit"
65C0 0E2E_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the paddle top of CASSETTE 1 in
the cash unit transport of cash unit"
65C0 0E2F_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the pressure unit of CASSETTE 1 in
the cash unit transport of cash unit"
65C0 0E30_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error State in safe of the transport sensor of CASSETTE
2 in cash unit transport of cash unit"
65C0 0E31_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of CASSETTE 2 in the cash unit
transport of cash unit string 2"
65C0 0E32_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the cassette entry sensor of
CASSETTE 2 in the cash unit transport of cash unit"
65C0 0E33_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the DC motor retreat plate of
CASSETTE 2 in the cash unit transport of cash unit"
65C0 0E34_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the dispense unit of CASSETTE 2 in
the cash unit transport of cash unit"
65C0 0E35_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the junction of CASSETTE 2 in the
cash unit transport of cash unit"

May 2011 385

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

65C0 0E36_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the junction magnet of CASSETTE
2 in the cash unit transport of cash unit"
65C0 0E37_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the paddle bottom of CASSETTE 2
in teh cash unit transport of cash unit"
65C0 0E38_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the paddle top of CASSETTE 2 in
the cash unit transport of cash unit"
65C0 0E39_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the pressure unit of CASSETTE 2 in
the cash unit transport of cash unit"
65C0 0E3A_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the transport sensor of CASSETTE
2 in the cash unit transport of cash unit"
65C0 0E3B_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of CASSETTE 3 in the cash unit
transport of cash unit"
65C0 0E3C_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the cassette entry sensor of
CASSETTE 3 in the cash unit transport of cash unit"
65C0 0E3D_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the DC motor retreat plate of
CASSETTE 3 in the cash unit transport of cash unit"
65C0 0E3E_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the dispense unit in CASSETTE 3 in
the cash unit transport of cash unit"
65C0 0E3F_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the junction of CASSETTE 3 in the
cash unit transport of cash unit"
65C0 0E40_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the junction magnet of CASSETTE
3 in the cash unit transport of cash unit"
65C0 0E41_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the paddle bottom of CASSETTE 3
in the cash unit transport of cash unit"
65C0 0E42_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the paddle top of CASSETTE 3 in
the cash unit transport of cash unit"
65C0 0E43_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the pressure unit of CASSETTE 3 in
the cash unit transport of cash unit"
65C0 0E44_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the transport sensor of CASSETTE
3 in the cash unit transport of cash unit"
65C0 0E45_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of CASSETTE 4 in the cash unit
transport of cash unit"
65C0 0E46_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the cassette entry sensor of
CASSETTE 4 of the cash unit transport in cash unit"
65C0 0E47_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the DC motor retreat plate of
CASSETTE 4 in the cash unit transport of cash unit"
65C0 0E48_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the dispense unit of CASSETTE 4 in
the cash unit transport of cash unit"
65C0 0E49_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the junction of CASSETTE 4 in the
cash unit transport of cash unit"
65C0 0E4A_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the junction magnet of CASSETTE
4 in the cash unit transport of cash unit"
65C0 0E4B_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the paddle bottom of CASSETTE 4
in the cash unit transport of cash unit"
65C0 0E4C_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the paddle top of CASSETTE 4 in
the cash unit transport of cash unit"
65C0 0E4D_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the pressure unit of CASSETTE 4 in
the cash unit transport of cash unit"
65C0 0E4E_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the transport sensor of CASSETTE
4 in the cash unit transport of cash unit"
65C0 0E4F_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of CASSETTE 5 in the cash unit
transport of cash unit"
65C0 0E50_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the cassette entry sensor of
CASSETTE 5 in the cash unit transport of cash unit"
65C0 0E51_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the DC motor retreat plate of
CASSETTE 5 in the cash unit transport of cash unit "
65C0 0E52_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the dispense unit of CASSETTE 5 in
the cash unit transport of cash unit"
65C0 0E53_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the junction of CASSETTE 5 in the
cash unit transport of cash unit"
65C0 0E54_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the junction magnet of CASSETTE
5 in the cash unit transport of cash unit"
65C0 0E55_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the paddle bottom of CASSETTE 5
in the cash unit transport of cash unit"
65C0 0E56_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the paddle top of CASSETTE 5 in
the cash unit transport of cash unit"
65C0 0E57_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the pressure unit of CASSETTE 5 in
the cash unit transport of cash unit"
65C0 0E58_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the transport sensor of CASSETTE
5 in the cash unit transport of cash unit"

386 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

65C0 0E59_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of ROLLER 1 - ROLLER 2 in the cash
unit transport of the cash unit string"
65C0 0E5A_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the junction magnet of ROLLER 1 -
ROLLER 2 in the cash unit transport of cash unit"
65C0 0E5B_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the transport sensor 1 of ROLLER 1
- ROLLER 2 in the cash unit transport of cash unit"
65C0 0E5C_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the transport sensor 2 of ROLLER 1
- ROLLER 2 in the cash unit transport of cash unit"
65C0 0E5D_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the transport sensor 3 of ROLLER 1
- ROLLER 2 in the cash unit transport of cash unit"
65C0 0E5E_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the upper junction of ROLLER 1 -
ROLLER 2 in the cash unit transport of cash unit"
65C0 0E5F_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of CASSETTE 1 in cash unit string 3"
65C0 0E60_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of CASSETTE 2 in cash unit string 3"
65C0 0E61_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of ROLLER 3 in cash unit 3"
65C0 0E62_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the entry sensor of ROLLER 3 in
cash unit"
65C0 0E63_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the ROLLER 4 if cash unit"
65C0 0E64_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the entry sensor of ROLLER 4 in
cash unit"
65C0 0E65_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of CASSETTE 1 in the cash unit
transport of cash unit"
65C0 0E66_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the cassette entry sensor of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E67_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the DC motor retreat plate of
CASSETTE 1 in the cash unit transport of cash unit"
65C0 0E68_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the dispense unit of CASSETTE 1 in
the cash unit transport of cash unit"
65C0 0E69_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the junction of CASSETTE 1 in the
cash unit transport of cash unit"
65C0 0E6A_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the junction magnet of CASSETTE
1 in the cash unit transport of cash unit"
65C0 0E6B_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the paddle bottom of CASSETTE 1
in the cash unit transport of cash unit"
65C0 0E6C_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the paddle top of CASSETTE 1 in
the cash unit transport of cash unit"
65C0 0E6D_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the pressure unit of CASSETTE 1 in
the cash unit transport of cash unit"
65C0 0E6E_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the transport sensor of CASSETTE
1 in the cash unit transport of cash unit"
65C0 0E6F_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error in state of CASSETTE 2 in the cash unit transport
of cash unit string 3"
65C0 0E70_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the cassette entry sensor of
CASSETTE 2 in the cash unit transport of cash unit string 3"
65C0 0E71_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the DC motor retreat plate of
CASSETTE 2 in the cash unit transport of cash unit string 3"
65C0 0E72_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the dispense unit of CASSETTE 2 in
the cash unit transport of cash unit string 3"
65C0 0E73_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the junction of CASSETTE 2 in the
cash unit transport of cash unit string 3"
65C0 0E74_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the junction magnet of CASSETTE
2 in the cash unit transport of cash unit string 3"
65C0 0E75_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the paddle bottom of CASSETTE 2
in the cash unit transport of cash unit string 3"
65C0 0E76_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the paddle top of CASSETTE 2 in
the cash unit transport of cash unit string 3"
65C0 0E77_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the presssure unit of CASSETTE 2
in the cash unit transport of cash unit string 3"
65C0 0E78_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the transport sensor of CASSETTE
2 in the cash unit transport of cash unit string 3"
65C0 0E79_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of ROLLER 3 - ROLLER 4 in the cash
unit transport of cash unit"
65C0 0E7A_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the lower junction of ROLLER 3 -
ROLLER 4 in the cash unit transport of cash unit"
65C0 0E7B_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the lower junction single magnet of
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E7C_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the lower junction twin magnet of
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E7D_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the transport sensor 1 of ROLLER 3
- ROLLER 4 in the cash unit transport of cash unit"

May 2011 387

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

65C0 0E7E_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the transport sensor 2 of ROLLER 3
- ROLLER 4 in the cash unit transport of cash unit"
65C0 0E7F_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the transport sensor 3 of ROLLER 3
- ROLLER 4 in the cash unit transport of cash unit"
65C0 0E80_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the transport sensor of 4 ROLLER 3
- ROLLER 4 in the cash unit transport of cash unit"
65C0 0E81_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the upper junction of ROLLER 3 -
ROLLER 4 in the cash unit transport of cash unit"
65C0 0E82_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the upper junction single magnet of
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E83_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error in safe of the upper junction twin magnet of
ROLLER 3 - ROLLER 4 in the cash unit transport of cash unit"
65C0 0E84_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the distr. transport"
65C0 0E85_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the cassette sensor if the distr.
transport"
65C0 0E86_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the head sensor of the distr.
transport"
65C0 0E87_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the reject junction magnet of the
distr. transport"
65C0 0E88_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the retract junction magnet in the
distr. transport"
65C0 0E89_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the thickness sensor of the distr.
transport"
65C0 0E8A_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the transport sensor in the thickness
sensor of the distr. transport"
65C0 0E8B_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the distr. transport deskC"
65C0 0E8C_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the cassette sensor of the distr.
transport deskC"
65C0 0E8D_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the head sensor of the distr.
transport deskC"
65C0 0E8E_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the lower box junction of the distr.
transport deskC"
65C0 0E8F_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: e Error state in safe of the lower box junction magnet of
the distr. transport deskC"
65C0 0E90_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the lower cassette sensor of the distr.
transport deskC"
65C0 0E91_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the reel storage sensor of the distr.
transport deskC"
65C0 0E92_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the thickness sensor of the distr.
transport deskC"
65C0 0E93_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the transport sensor in the thickness
sensor of the distr. transport deskC"
65C0 0E94_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the the triple junction of the distr.
transport deskC"
65C0 0E95_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the triple junction single magnet of
the distr. transport deskC"
65C0 0E96_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the triple junction twin magnet of the
distr. transport deskC"
65C0 0E97_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the upper box junction of the distr.
transport deskC"
65C0 0E98_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the upper box junction magnet of the
distr. transport deskC"
65C0 0E99_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the generic distr. transport"
65C0 0E9A_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of cassette 3"
65C0 0E9B_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the cash unit transport paddle
bottom"
65C0 0E9C_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the cash unit transport paddle top"
65C0 0E9D_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in head of the bim transport unit"
65C0 0E9E_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the cash unit transport pressure unit"
65C0 0E9F_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the cash unit transport motor retreat
plate"
65C0 0EA0_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the cash unit transport junction
magnet"
65C0 0EA1_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the cash unit transport cassette entry
sensor"
65C0 0EA2_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the cash unit transport sensor"
65C0 0EA3_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the cash unit transport dispense unit"
65C0 0EA4_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the cash unit transport cassette 3"
65C0 0EA5_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in safe of the cash unit transport junction"
65C0 0EA6_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state of the RM3 system"

388 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables CSC-W32 Error Classes

65C0 0EA7_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: Error state in cash unit transport of triple compartment
magnet"
65C0 0FA0_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: unknown configuration error"
65C0 1388_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logically unknown logical error"
65C0 1389_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logically no notes detected"
65C0 138A_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: escrow full"
65C0 138B_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: customer cash-in limit reached"
65C0 138C_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: device cash-in capacity reached"
65C0 138D_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: separation not possible from input tray"
65C0 138E_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: foreign material detected"
65C0 138F_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: notes inserted, short side first"
65C0 1390_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: shutter blocked"
65C0 1391_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: retract not possible because all retract desti-
nations full"
65C0 1393_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: cassette 1 unexpectedly empty"
65C0 1394_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: cassette 2 unexpectedly empty"
65C0 1395_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: cassette 3 unexpectedly empty"
65C0 1396_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: cassette 4 unexpectedly empty"
65C0 1397_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: cassette 5 unexpectedly empty"
65C0 1398_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: cassette 6 unexpectedly empty"
65C0 1399_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: cassette 7 unexpectedly empty"
65C0 139A_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: cassette 8 unexpectedly empty"
65C0 139D_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: roller 1 unexpectedly empty"
65C0 139E_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: roller 2 unexpectedly empty"
65C0 139F_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: roller 3 unexpectedly empty"
65C0 13A0_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: roller 4 unexpectedly empty"
65C0 13A1_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: roller 5 unexpectedly empty"
65C0 13A2_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: roller 6 unexpectedly empty"
65C0 13A3_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: roller 7 unexpectedly empty"
65C0 13A4_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: roller 8 unexpectedly empty"
65C0 13A5_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: replenish unit 1 unexpected"
65C0 13A7_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: too many rejects from cassette 1"
65C0 13A8_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: too many rejects from cassette 2"
65C0 13A9_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: too many rejects from cassette 3"
65C0 13AA_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: too many rejects from cassette 4"
65C0 13AB_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: too many rejects from cassette 5"
65C0 13AC_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: too many rejects from cassette 6"
65C0 13AD_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: too many rejects from cassette 7"
65C0 13AE_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: too many rejects from cassette 8"
65C0 13B1_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: too many rejects from roller 1"
65C0 13B2_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: too many rejects from roller 2"
65C0 13B3_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: too many rejects from roller 3"
65C0 13B4_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: too many rejects from roller 4"
65C0 13B5_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: too many rejects from roller 5"
65C0 13B6_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: too many rejects from roller 6"
65C0 13B7_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: too many rejects from roller 7"
65C0 13B8_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: too many rejects from roller 8"
65C0 13BB_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: unexpected note from cassette 1"
65C0 13BC_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: unexpected note from cassette 2"
65C0 13BD_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: unexpected note from cassette 3"
65C0 13BE_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: unexpected note from cassette 4"
65C0 13BF_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: unexpected note from cassette 5"
65C0 13C0_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: unexpected note from cassette 6"
65C0 13C1_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: unexpected note from cassette 7"
65C0 13C2_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: unexpected note from cassette 8"
65C0 13C5_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: unexpected note from roller 1"
65C0 13C6_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: unexpected note from roller 2"
65C0 13C7_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: unexpected note from roller 3"
65C0 13C8_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: unexpected note from roller 4"
65C0 13C9_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: unexpected note from roller 5"
65C0 13CA_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: unexpected note from roller 6"
65C0 13CB_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: unexpected note from roller 7"
65C0 13CC_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: unexpected note from roller 8"
65C0 13CF_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: inseparable items in cassette 1"
65C0 13D0_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: inseparable items in cassette 2"

May 2011 389

CSC-W32 Error Classes MDS Status 912/911 Reference Tables

65C0 13D1_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: inseparable items in cassette 3"
65C0 13D2_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: inseparable items in cassette 4"
65C0 13D3_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: inseparable items in cassette 5"
65C0 13D4_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: inseparable items in cassette 6"
65C0 13D5_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: inseparable items in cassette 7"
65C0 13D6_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: inseparable items in cassette 8"
65C0 13D9_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: inseparable items in roller 1"
65C0 13DA_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: inseparable items in roller 2"
65C0 13DB_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: inseparable items in roller 3"
65C0 13DC_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: inseparable items in roller 4"
65C0 13DD_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: inseparable items in roller 5"
65C0 13DE_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: inseparable items in roller 6"
65C0 13DF_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: inseparable items in roller 7"
65C0 13E0_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: inseparable items in roller 8"
65C0 13E1_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: the needed destination ran full"
65C0 13E2_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: replenish unit is needed but missing"
65C0 13E3_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: inserted bundle is too long"
65C0 13E4_E A700000 :4000 000DP01:3D:33:35 "CASHIN RM3: logical error: inserted bundle is too thick"

390 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference TablesApplication Error Classes (LYNX erro

Application Error Classes (LYNX errors)

Transaction (Class: 6434)

Table 99: Transaction (Class: 6434)
Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
6434 0001_E >4084 >84 000CR01:23:00:00 "LYNX TRX: Card was captured"
6434 0001_W >4084 >84 000CR01:23:00:00 "LYNX TRX: Card was captured"
6434 0002_E 2820100 2820100 000PR01:38:62:00 "LYNX TRX: Receipt printer not configured"
6434 0003_E 2820100 2820100 000SP01:39:00:00 "LYNX TRX: Statement printer not configured"
6434 0004_E 2820100 2820100 000SP01:3F:40:61 "LYNX TRX: Statement was retracted"
6434 0004_W 2840000 2840000 000SP01:3F:40:61 "LYNX TRX: Statement was retracted"
6434 0005_W A400000 :0400 000DP01:3E:42:40 "LYNX TRX: Deposit general error"
6434 0006_E A101000 :0010 000DP01:24:00:00 "LYNX TRX: Deposit was cancelled"
6434 0007_E A100000 :1000 000DP01:23:00:00 "LYNX TRX: Deposit timeout"
6434 0008_E A400000 :0400 000DP01:3E:00:00 "LYNX TRX: Deposit not configured"
6434 0009_E ?0912 80000000000000000 000DI01:38:00:00 "LYNX TRX: Cash dispenser not configured"
6434 000A_W 2810001 2810001 000PR02:38:60:00 "LYNX TRX: Journal printer general error"
6434 000B_W 2820100 2820100 000PR01:39:44:00 "LYNX TRX: Receipt printer general error"
6434 000C_W 2840100 2820100 000SP01:3F:40:40 "LYNX TRX: Document printer general error"
6434 000D_W =00?: =?: 000CR01:38:00:00 "LYNX TRX: Card reader general HW error"
6434 000E_E 2810001 2810001 000PR02:38:60:00 "LYNX TRX: Journal printer error, spooler active"
6434 000E_W 2810001 2810001 000PR02:38:60:00 "LYNX TRX: Journal printer warning, spooler active"
6434 0010_E @04 904 000DR01:23:00:01 "LYNX TRX: Money was retracted error"
6434 0010_W @04 904 000DR01:23:00:01 "LYNX TRX: Money was retracted warning"
6434 0011_W A400000 :0200 000DP01:3E:42:40 "LYNX TRX: Deposit shutter not opened"
6434 0012_W 884 80101000000000000 000VN01:3A:50:40 "LYNX TRX: Panel Protection door problem"
6434 0013_W =8084 =84 000CR01:3E:42:40 "LYNX TRX: Card read threshold"
6434 0014_W ?0000 80000000000000000 000DI01:2D:0m:0n "LYNX TRX: Cassette low"
6434 0015_W 2810020 2810020 000PR02:3D:50:00 "LYNX TRX: Journal paper low, warning"
6434 0015_E 2810020 2810020 000PR02:3D:50:00 "LYNX TRX: Journal paper low, error"
6434 0016_W 2828000 2828000 000PR01:2D:50:00 "LYNX TRX: Receipt paper low"
6434 0017_W 2828000 2828000 000SP01:2D:30:04 "LYNX TRX: Document paper low"
6434 0018_E ?3000 80000000000000000 000DI01:3F:00:01 "LYNX TRX: Try to dispense with money in transport"
6434 0019_E =1782 =82 000CR01:3E:40:42 "LYNX TRX: Card write attempt but no track data"
6434 001A_E @04 904 000DR01:23:00:01 "LYNX TRX: Money was retracted in ADRS"
6434 001B_E 2828000 2828000 000SP01:3D:30:04 "LYNX TRX: Document paper empty, documents not
printed"
6434 001B_W 2828000 2828000 000SP01:3D:30:04 "LYNX TRX: Document paper empty after successful print"
6434 0020_W @04 904 000DR01:3A:41:40 "LYNX TRX: CDM shutter error"
6434 0021_W A480000 :4000 000DP01:3D:60:7C "LYNX TRX: Deposit bin missing"
6434 0022_W A400000 :4000 000DP01:3E:42:40 "LYNX TRX: Deposit jam"
6434 0023_W A400000 :4000 000DP01:3E:42:40 "LYNX TRX: Deposit envelope jam"
6434 0024_W A020000 :4000 000DP01:30:45:30 "LYNX TRX: Deposit no envelope"
6434 0025_W A600000 :4000 000DP01:3E:42:40 "LYNX TRX: Deposit printer failure"
6434 0026_W A400000 :4000 000DP01:3E:42:40 "LYNX TRX: Deposit envelope size"
6434 0027_W A400000 :4000 000DP01:3E:42:40 "LYNX TRX: Deposit shutter not close"
6434 0028_W A020000 :4000 000DP01:3E:40:7C "LYNX TRX: Deposit bin full"
6434 0028_E A020000 :4000 000DP01:3E:40:7C "LYNX TRX: Deposit bin full (ADRS)"
6434 0029_W =80?: =?: 000CR01:3E:44:40 "LYNX TRX: Card reader bin overfilled"
6434 002A_E ?0902 80000000000000000 000DI01:38:00:00 "LYNX TRX: CAS - CDM: Consumer timeout in screen
dialog 907"
6434 002B_E ?0902 80000000000000000 000DI01:38:00:00 "LYNX TRX: CAS - CDM: Consumer has cancelled screen
dialog 907"
6434 002C_E A100000 :4000 000DP01:23:00:00 "LYNX TRX: CAS - DEP: Consumer timeout in screen dialog
906"
6434 002D_E A101000 :0010 000DP01:24:00:00 "LYNX TRX: CAS - DEP: Consumer has cancelled screen
dialog 906"

May 2011 391

Application Error Classes (LYNX errors)MDS Status 912/911 Reference Tab

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
6434 002E_E 2820100 2820100 000SP01:23:00:00 "LYNX TRX: CAS - DOC: Consumer timeout in Screen
dialog 909"
6434 002F_E 2820100 2820100 000SP01:24:00:00 "LYNX TRX: CAS - DOC: Consumer has cancelled screen
dialog 909"
6434 0030_E J J 000SD01:2D:00:01 "LYNX TRX: Envelope dispenser LOW"
6434 0031_E J J 000SD01:3D:00:37 "LYNX TRX: Envelope dispenser EMPTY"
6434 0031_W J J 000SD01:3D:00:37 "LYNX TRX: Envelope dispenser EMPTY"
6434 0032_W J J 000SD01:3E:00:35 "LYNX TRX: Envelope dispenser error"
6434 0033_W J J 000SD01:3E:00:35 "LYNX TRX: Envelope dispenser jam"
6434 0034_W J J 000SD01:3E:00:35 "LYNX TRX: Envelope dispenser shutter not close"
6434 0035_W J J 000SD01:3E:00:35 "LYNX TRX: Envelope dispenser shutter not open"
6434 0036_E 2820100 2820100 000SP01:3D:00:0D "LYNX TRX: Statement capture bin full"
6434 0037_E 2810081 2810081 000PR02:3D:60:00 "LYNX TRX: Journal paper nearly empty, error"
6434 0037_W 2810081 2810081 000PR02:3D:60:00 "LYNX TRX: Journal paper nearly empty, warning"
6434 0038_E 2822100 2822100 000PR01:3D:60:00 "LYNX TRX: Receipt paper nearly empty"
6434 0039_E ?3000 80000000000000000 000DI01:3F:00:01 "LYNX TRX: Shutter not close or money jam, dispense
operation declined"
6434 003A_E =0084 =84 000CR01:3E:60:48 "LYNX TRX: Card manipulation detected while waiting for
card"
6434 003B_E 2810001 2810001 000PR02:38:60:00 "LYNX TRX: Journal printer error, spooler active"
6434 003C_E 2810001 2810001 000PR02:38:60:00 "LYNX TRX: Journal printer ok, reprint started"
6434 003D_E 2810001 2810001 000PR02:38:60:00 "LYNX TRX: Journal printer ok, reprint finished"
6434 003E_E 2810001 2810001 000PR02:38:60:00 "LYNX TRX: Journal printer error, spooler error"
6434 003F_E J J 000EP01:38:00:0F "LYNX TRX: 5 consecutive PIN dialog errors, possible stuck
key or EDM error"
6434 0040_E 2822100 2822100 000PR01:3D:60:00 "LYNX TRX: Receipt paper jam or paper empty"
6434 0041_E 2810081 2810081 000PR02:3D:60:00 "LYNX TRX: Journal paper jam or paper empty"
6434 0042_E >40?: >?: 000CR01:3E:48:40 "LYNX TRX: Card was captured after jam"
6434 0043_W 2810020 2810020 000PR03:3D:50:40 "LYNX TRX: Hard disk free space becomes low"
6434 0043_E 2810020 2810020 000PR03:3D:60:40 "LYNX TRX: No hard disk free space available"
6434 0044_E =1782 =82 000CR01:3E:40:42 "LYNX TRX: Card write attempted but track not installed"
6434 0045_E =1782 =82 000CR01:3E:40:42 "LYNX TRX: Card write command failed"
6434 0046_E =8082 =82 000CR01:3E:48:40 "LYNX TRX: Card trap active"
6434 0047_E =8082 =82 000CR01:3E:48:40 "LYNX TRX: Mouth piece vandalism"
6434 0048_E =8082 =82 000CR01:3E:48:40 "LYNX TRX: Card reader skimming active"
6434 0049_E =8082 =82 000CR01:3E:48:40 "LYNX TRX: Too many consecutive card jams"
6434 004A_E ?3000 80000000000000000 000CR01:3F:00:01 "LYNX TRX: Shutter not close and cash tray not empty,
dispense operation declined"
6434 004B_E ?3000 80000000000000000 000CR01:3F:00:01 "LYNX TRX: Shutter not close but cash tray, dispense
operation declined"
6434 004C_E ?3000 80000000000000000 000CR01:3F:00:01 "LYNX TRX: Shutter closed but cash tray not empty,
dispense operation declined"
6434 004D_E ?3000 80000000000000000 000CR01:3F:00:01 "LYNX TRX: Shutter not closed, cash tray empty, but trans-
portway not free, dispense operation declined"
6434 004E_E =8084 80000000000000000 000DI01:3F:00:01 "LYNX TRX: CDM shutter tampered, dispense operation
declined"
6434 004F_E =8084 =84 000CR01:23:00:00 "LYNX TRX: DIP card not taken"
6434 0050_E G0000 G0000 000CN01:00:00:00 "LYNX TRX: Coin Hopper low or out"
6434 0051_E G0353 G0353 000CN01:3E:00:01 "LYNX TRX: Coin low not set"
6434 0052_E G0354 G0354 000CN01:3D:33:35 "LYNX TRX: Coin Hopper out, no dispense attempted"
6434 0053_E G0353 G0353 000CN01:3D:33:35 "LYNX TRX: Coin inoperative before dispense"
6434 0054_E G0354 G0354 000CN01:3D:33:35 "LYNX TRX: Coin Hopper low, no dispense attempted"
6434 0055_E G0335 G0335 000CN01:3E:33:33 "LYNX TRX: Coin error after good dispense"
6434 0056_E G0335 G0335 000CN01:3E:33:33 "LYNX TRX: Coin dispense error, Hopper jam"
6434 0057_E G0332 G0332 000CN01:3E:33:33 "LYNX TRX: Coin dispense error, FATAL"
6434 005D_E J J 000EP01:38:00:0F "LYNX TRX: PIN pad not operational"
6434 005E_E @04 904 000DR01:23:00:01 "LYNX TRX: CDM shutter tampered, money retracted"
6434 005F_E J J 000EP01:38:00:0F "LYNX TRX: PIN pad tampered, transaction cancelled"
6434 0060_E S0060 S0060 000SC01:38:00:00 "LYNX TRX: Barcode Reader hardware error, FATAL"
6434 0061_E S0061 S0061 000SC01:38:00:00 "LYNX TRX: Barcode read timeout"
6434 0062_E S0062 S0062 000SC01:38:00:00 "LYNX TRX: Barcode read cancelled"
6434 0063_E S0063 S0063 000SC01:38:00:00 "LYNX TRX: Barcode read error"

392 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference TablesApplication Error Classes (LYNX erro

Cash Dispenser (Class: 643A)

Table 100: Cash Dispenser (Class: 643A)
Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
643A DEFA_W ?0354 80000000000000000 000DI01:3D:33:35 "LYNX CDM: Warning not found, use default entry"
643A DEFA_E ?5354 80000000000000000 000DI01:3D:33:35 "LYNX CDM: Error not found, use default entry"
643A 0001_E ?0363 80000000000000000 000DI01:3F:33:36 "LYNX CDM: Invalid cassette number"
643A 0002_E ?0B75 80000000000000000 000DI01:3F:31p37 "LYNX CDM: Try from empty or low cassette"
643A 0002_W ?0B75 80000000000000000 000DI01:3F:31p37 "LYNX CDM: Not dispenseable"
643A 0003_E ?1000 80000000000000000 000DI01:3E:01:01 "LYNX CDM: Safe door open during dispense"
643A 0004_E ?0793 80000000000000000 000DI01:3D:37:39 "LYNX CDM: Reject cassette not operational"
643A 0005_E ?0782 80000000000000000 000DI01:3D:37:38 "LYNX CDM: Reject cassette full"
643A 0006_E ?0782 80000000000000000 000DI01:3D:37:38 "LYNX CDM: Max retracts reached"
643A 0007_E ?0793 80000000000000000 000DI01:3D:37:39 "LYNX CDM: Reject bin missing"
643A 0008_E ; ;0000000000000000 000DI01:39:00:01 "LYNX CDM: Max present errors after dispense"
643A 0009_E ; ;0000000000000000 000DI01:39:00:00 "LYNX CDM: Cash dispenser fatal"
643A 000B_E ?0B75 80000000000000000 000DI01:3F:31p37 "LYNX CDM: Partial/short dispense/present"
643A FEB5_W ?0912 80000000000000000 000DI01:38:39:31 "LYNX WOSA RTC: -331 (Order not allowed)"
643A FEB6_W ?3000 80000000000000000 000DI01:3F:00:01 "LYNX WOSA RTC: -330 (Shutter not closed)"
643A FEC0_W ?0B75 80000000000000000 000DI01:3F:31p37 "LYNX WOSA RTC: -320 (Denomination error)"
643A FEC3_W ?5J40 80000000000000000 000DI01:3F:39p34 "LYNX WOSA RTC: -317 (No documents, no bills)"
643A FEC4_W ?0912 80000000000000000 000DI01:38:39:31 "LYNX WOSA RTC: -316 (Invalid cash unit)"
643A FEC5_W @00 900 000DR01:3A:33:41 "LYNX WOSA RTC: -315 (Shutter closed)"
643A FEC6_W @00 900 000DR01:23:00:00 "LYNX WOSA RTC: -314 (Shutter open)"
643A FEC7_W @00 900 000DR01:3A:33:41 "LYNX WOSA RTC: -313 (Shutter not open)"
643A FEC8_W @04 904 000DR01:23:00:01 "LYNX WOSA RTC: -312 (Invalid retract)"
643A FEC9_W ?1000 80000000000000000 000DI01:3E:01:01 "LYNX WOSA RTC: -311 (Safe door open)"
643A FECA_W ?3000 80000000000000000 000DI01:3F:00:01 "LYNX WOSA RTC: -310 (Position locked)"
643A FECB_W ?3000 80000000000000000 000DI01:3F:00:01 "LYNX WOSA RTC: -309 (Invalid position)"
643A FECC_W ?0332 80000000000000000 000DI01:3E:33:33 "LYNX WOSA RTC: -308 (Documents, bills left)"
643A FECD_W ?5A12 80000000000000000 000DI01:3F:30p31 "LYNX WOSA RTC: -307 (Too many documents)"
643A FECE_W ?0B75 80000000000000000 000DI01:3F:31p37 "LYNX WOSA RTC: -306 (Not dispensable)"
643A FECF_W ?0912 80000000000000000 000DI01:38:39:31 "LYNX WOSA RTC: -305 (No currency mix)"
643A FED0_W ?0912 80000000000000000 000DI01:38:39:31 "LYNX WOSA RTC: -304 (Invalid mix type)"
643A FED1_W ?0363 80000000000000000 000DI01:3F:33:36 "LYNX WOSA RTC: -303 (Invalid denomination)"
643A FED2_W ?0B75 80000000000000000 000DI01:3F:31p37 "LYNX WOSA RTC: -302 (Cash unit error)"
643A FED3_W ?0B75 80000000000000000 000DI01:3F:31p37 "LYNX WOSA RTC: -301 (Invalid teller ID)"
643A FED4_W ?0354 80000000000000000 000DI01:3D:33:35 "LYNX WOSA RTC: -300 (Invalid currency)"
643A FFD0_W ?0354 80000000000000000 000DI01:3D:33:35 "LYNX WOSA RTC: -48 (Warning timeout)"
643A FFF2_W ?3002,?0 80000000000000008 000DI01:3F:00:01,0 "LYNX WOSA RTC: Hardware error, cannot dispense or
B75,@04, ,8000000000000000 00DI01:3F:31p37,00 deliver"
@00 8,904,900 0DR01:3A:41:40,00
0DR01:3A:37:41
643A FFF3_W ?5633 80000000000000000 000DI01:3E:01:01 "LYNX WOSA RTC: Hardware error, device not ready"
643A FFFF_W ?5633 80000000000000000 000DI01:3E:01:01 "LYNX WOSA RTC: General error, device not ready"
643A FEB5_E ?0912 80000000000000000 000DI01:38:39:31 "LYNX WOSA RTC: -331 (Order not allowed)"
643A FEB6_E ?3000 80000000000000000 000DI01:3F:00:01 "LYNX WOSA RTC: -330 (Shutter not closed)"
643A FEC0_E ?0B75 80000000000000000 000DI01:3F:31p37 "LYNX WOSA RTC: -320 (Denomination error)"
643A FEC3_E ?5J40 80000000000000000 000DI01:3F:39p34 "LYNX WOSA RTC: -317 (No documents, no bills)"
643A FEC4_E ?0912 80000000000000000 000DI01:38:39:31 "LYNX WOSA RTC: -316 (Invalid cash unit)"
643A FEC5_E @00 900 000DR01:3A:33:41 "LYNX WOSA RTC: -315 (Shutter closed)"
643A FEC6_E @00 900 000DR01:23:00:00 "LYNX WOSA RTC: -314 (Shutter open)"
643A FEC7_E @00 900 000DR01:3A:33:41 "LYNX WOSA RTC: -313 (Shutter not open)"
643A FEC8_E @04 900 000DR01:23:00:01 "LYNX WOSA RTC: -312 (Invalid retract)"
643A FEC9_E ?1000 80000000000000000 000DI01:3E:01:01 "LYNX WOSA RTC: -311 (Safe door open)"
643A FECA_E ?3000 80000000000000000 000DI01:3F:00:01 "LYNX WOSA RTC: -310 (Position locked)"
643A FECB_E ?3000 80000000000000000 000DI01:3F:00:01 "LYNX WOSA RTC: -309 (Invalid position)"
643A FECC_E ?0332 80000000000000000 000DI01:3E:33:33 "LYNX WOSA RTC: -308 (Documents, bills left)"
643A FECD_E ?5A12 80000000000000000 000DI01:3F:30p31 "LYNX WOSA RTC: -307 (Too many documents)"
643A FECE_E ?0B75 80000000000000000 000DI01:3F:31p37 "LYNX WOSA RTC: -306 (Not dispensable)"
643A FECF_E ?0912 80000000000000000 000DI01:38:39:31 "LYNX WOSA RTC: -305 (No currency mix)"
643A FED0_E ?0912 80000000000000000 000DI01:38:39:31 "LYNX WOSA RTC: -304 (Invalid mix type)"

May 2011 393

Application Error Classes (LYNX errors)MDS Status 912/911 Reference Tab

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
643A FED1_E ?0363 80000000000000000 000DI01:3F:33:36 "LYNX WOSA RTC: -303 (Invalid denomination)"
643A FED2_E ?0B75 80000000000000000 000DI01:3F:31p37 "LYNX WOSA RTC: -302 (Cash unit error)"
643A FED3_E ?0B75 80000000000000000 000DI01:3F:31p37 "LYNX WOSA RTC: -301 (Invalid teller ID)"
643A FED4_E ?0354 80000000000000000 000DI01:3D:33:35 "LYNX WOSA RTC: -300 (Invalid currency)"
643A FFD0_E ?0354 80000000000000000 000DI01:3D:33:35 "LYNX WOSA RTC: -48 (Error timeout)"
643A FFF2_E ?3002,?0 80000000000000008 000DI01:3F:00:01,0 "LYNX WOSA RTC: Hardware error, cannot dispense or
B75,@04, ,8000000000000000 00DI01:3F:31p37,00 deliver"
@00 8,904,900 0DR01:3A:41:40,00
0DR01:3A:37:41
643A FFF3_E ?5633 80000000000000000 000DI01:3E:01:01 "LYNX WOSA RTC: Hardware error, device not ready"
643A FFFF_E ?5633 80000000000000000 000DI01:3E:01:01 "LYNX WOSA RTC: General error, device not ready"

Security Module (Class: 643C)

Table 101: Security Module (Class: 643C)
Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
643C 0001_E J J 000PF01:39:00:1C "LYNX SEC: Set key error, possibly wrong keys"
643C 0002_E 000ED01:3A:40:40 "LYNX SEC: PIN check error, possibly wrong
keys"
643C 0003_E J J 000PF01:3F:00:56 "LYNX SEC: Error while creating host PIN block"
643C 0004_E J J 000PF01:3F:00:0E "LYNX SEC: Error calculating MAC"
643C 0005_E J J 000PF01:3F:00:1E "LYNX SEC: Error initializing transaction"

CashIn transaction (Class: 6446)

Table 102: CashIn transaction (Class: 6446)
Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
6446 0001_E A400001 :4001 000DP01:38:00:01 "LYNX CASHIN: CashIn not operational"
6446 0002_E A400002 :4002 000DP01:3E:42:40 "LYNX CASHIN: CashIn input shutter jam"
6446 0003_E A400003 :4003 000DP01:3E:42:40 "LYNX CASHIN: CashIn input tray jam"
6446 0004_E A400004 :4004 000DP01:3E:42:40 "LYNX CASHIN: CashIn input transport jam"
6446 0005_E A400005 :4005 000DP01:3E:42:40 "LYNX CASHIN: CashIn output shutter jam"
6446 0006_E A400006 :4006 000DP01:3E:42:40 "LYNX CASHIN: CashIn output tray jam"
6446 0007_E A400007 :4007 000DP01:3E:42:40 "LYNX CASHIN: CashIn output transport jam"
6446 0008_E A400008 :4008 000DP01:3E:42:40 "LYNX CASHIN: CashIn BIM not operational"
6446 0009_E A010009 :0109 000DP01:23:00:03 "LYNX CASHIN: CashIn retracted"
6446 000A_E A40000A :400A 000DP01:3E:42:40 "LYNX CASHIN: CashIn input stacker jam"
6446 000B_E A40000B :400B 000DP01:3E:42:40 "LYNX CASHIN: CashIn output stacker jam"
6446 000C_E A40000C :400C 000DP01:3E:42:40 "LYNX CASHIN: Hardware error on Drum 1"
6446 000D_E A40000D :400D 000DP01:3E:42:40 "LYNX CASHIN: Hardware error on Drum 2"
6446 000E_E A40000E :400E 000DP01:3E:42:40 "LYNX CASHIN: Hardware error on Drum 3"
6446 000F_E A40000F :400F 000DP01:3E:42:40 "LYNX CASHIN: Hardware error on Drum 4"
6446 0010_E A400010 :4010 000DP01:3E:42:40 "LYNX CASHIN: Error storing notes in safe"
6446 0011_E A020011 :0211 000DP01:3E:40:7C "LYNX CASHIN: One CashIn box is now overfilled"
6446 0012_E A020012 :0212 000DP01:3E:40:7C "LYNX CASHIN: Retract or/and CashIn boxes are overfilled"
6446 0013_E A400013 :4013 000DP01:3E:42:40 "LYNX CASHIN: Metal in CashIn tray detected"
6446 0014_E A400014 :4014 000DP01:3E:42:40 "LYNX CASHIN: CashIn reject bin full"
6446 0015_E A400015 :4015 000DP01:3E:42:40 "LYNX CASHIN: Security stripe sensor defective"
6446 0016_E A400016 :4016 000DP01:3E:42:40 "LYNX CASHIN: Metal sensor defective"

394 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference TablesApplication Error Classes (LYNX erro

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
6446 0017_E A100017 :1017 000DP01:23:00:01 "LYNX CASHIN: Escrow empty"
6446 0018_E A400018 :4018 000DP01:3E:00:00 "LYNX CASHIN: Error TRX reply buffer"
6446 0019_E A100019 :1019 000DP01:23:00:01 "LYNX CASHIN: Good Rollback, but L2 notes retracted"
6446 001A_E A10001A :101A 000DP01:23:00:01 "LYNX CASHIN: Rollback failed, all notes retracted"
6446 001B_E A10001B :101B 000DP01:23:00:01 "LYNX CASHIN: Good Cashin, but L2 notes retracted"
6446 001C_E A10001C :101C 000DP01:23:00:01 "LYNX CASHIN: Good Rollback, but all notes retracted after
consumer timeout"
6446 001D_E A10101D :101D 000DP01:24:00:00 "LYNX CASHIN: CashIn from host requested, but no cash on
escrow"
6446 001E_E A10001E :101E 000DP01:23:00:01 "LYNX CASHIN: Good Rollback, but L3 notes not returned"
6446 001F_E A10001F :101F 000DP01:23:00:01 "LYNX CASHIN: Good Rollback, but L2+L3 notes not
returned"
6446 0020_E A100020 :1020 000DP01:23:00:01 "LYNX CASHIN: Good Cashin, but L3 notes not returned"
6446 0021_E A100021 :1021 000DP01:23:00:01 "LYNX CASHIN: Good Cashin, but L2+L3 notes not returned"
6446 0022_E A100022 :1022 000DP01:23:00:01 "LYNX CASHIN: Roller failure, counter update in tran reply
suspected"
6446 0023_E A020023 :0223 000DP01:3E:40:7C "LYNX CASHIN: Maximum cash in retracts reached"
6446 0024_E A400024 :4024 000DP01:3E:42:40 "LYNX CASHIN: Too many consecutive failed cashin trans-
actions"
6446 0025_E A400025 :4025 000DP01:3E:42:40 "LYNX CASHIN: Fraud (Level 2) notes found"
6446 0026_E A400026 :4026 000DP01:3E:00:00 "LYNX CASHIN: NOTE_ID_LIST mismatch, identified cash
retracted"
6446 0027_E A400027 :4027 000DP01:3E:00:00 "LYNX CASHIN: CashIn TRX failed, max retries not reached
yet"
6446 0040_E A010040 :0140 000DP01:23:00:00 "LYNX CASHIN: CashIn retract attempted"
6446 0027_E A400027 :4027 000DP01:3E:00:00 "LYNX CASHIN: CashIn TRX failed, max retries not reached
yet"
6446 0028_E A400028 :4028 000DP01:3E:42:40 "LYNX CASHIN: Retract bin nearly full (high)"
6446 0050_E A400050 :4050 000DP01:38:00:02 "LYNX CASHIN: Coin in device not operational, check
transport ways"
6446 0051_E A400051 :4051 000DP01:3E:42:40 "LYNX CASHIN: Coin in rollback has failed, check transport
ways"
6446 0052_E A020052 :0252 000DP01:3E:40:7C "LYNX COININ: One CoinIn box is now overfilled"
6446 0053_E A020053 :0253 000DP01:3E:40:7C "LYNX COININ: CoinIn boxes are overfilled"
6446 0054_E A400054 :4054 000DP01:3E:42:40 "LYNX COININ: Error storing coins in safe"

WEB Dialog wrapper (Class: 6447)

Table 103: WEB Diaslog Wrapper (Class: 6447)
Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
6447 DEFA_E "LYNX WEB: Error not found, use default entry"
6447 0001_E "LYNX WEB: Online Page not found"
6447 0002_E "LYNX WEB: Offline Page not found"
6447 0003_E "LYNX WEB: CCDialog restarts"
6447 0004_E "LYNX WEB: Memory exceeded configured limit"
6447 0005_E "LYNX WEB: Start Surfing Mode"
6447 0006_E "LYNX WEB: Stop Surfing Mode"
6447 0007_E "LYNX WEB: Contents Control timeout"
6447 0008_E "LYNX WEB: WEB Dialog hangs"

EMV transaction (Class: 6459)

Table 104: EMV transaction (Class: 6459)
Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
6459 0001_W =8084 =84 000CR01:3E:42:40 "LYNX EMV: Chip contact threshold"

May 2011 395

Application Error Classes (LYNX errors)MDS Status 912/911 Reference Tab

Cheque transaction (Class: 645A)

Table 105: Cheque transaction (Class: 645A)
Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
645A DEFA_E q010000 q010000 000CQ01:3F:00:01 "LYNX CHEQUE: Cheque device jammed"
645A 0001_E q010000 q010000 000CQ01:3F:00:01 "LYNX CHEQUE: Cheque acception error"
645A 0002_E q020000 q020000 000CQ01:3F:00:02 "LYNX CHEQUE: Error during cheques storing"
645A 0003_E q030000 q030000 000CQ01:3F:00:03 "LYNX CHEQUE: Error during ejecting cheques"
645A 0004_E q040000 q040000 000CQ01:3F:00:04 "LYNX CHEQUE: Present timeout, cheque will be
captured"
645A 0005_E q050000 q050000 000CQ01:3F:00:05 "LYNX CHEQUE: Retract error, cheque may be
still in IO path"
645A 0006_E q060000 q060000 000CQ01:3F:00:06 "LYNX CHEQUE: Retract bin full, no more
cheques can be captured"
645A 0007_E q070000 q070000 000CQ01:3F:00:07 "LYNX CHEQUE: Cheque flush error"
645A 0008_E q080000 q080000 000CQ01:3F:00:08 "LYNX CHEQUE: Cheque device jammed"
645A 0009_E q090000 q090000 000CQ01:3F:00:09 "LYNX CHEQUE: Cheque archiving failed, check
path configuration"
645A 000A_E q100000 q100000 000CQ01:3F:00:10 "LYNX CHEQUE: Shutter jammed or blocked
during MediaIn"
645A 000B_E q110000 q110000 000CQ01:3F:00:11 "LYNX CHEQUE: General hardware error of
CCDM"
645A 000C_E q120000 q120000 000CQ01:3F:00:12 "LYNX CHEQUE: Safe door open, trx not
allowed"
645A 000D_E q130000 q130000 000CQ01:3F:00:13 "LYNX CHEQUE: Acceptor stop, MediaIn not
possible"
645A 000E_E q140000 q140000 000CQ01:3F:00:14 "LYNX CHEQUE: Lamp error, check Firewire
connection"
645A 000F_E q150000 q150000 000CQ01:3F:00:15 "LYNX CHEQUE: Cheque(s) retracted"
645A 0010_E q160000 q160000 000CQ01:3F:00:16 "LYNX CHEQUE: Print on Cheque failed,
exchange toner and check print head"
645A 0011_E q170000 q170000 000CQ01:3F:00:17 "LYNX CHEQUE: Toner low, exchange toner
soon"
645A 0012_E q180000 q180000 000CQ01:3F:00:18 "LYNX CHEQUE: Toner empty, printing on
cheques fail"
645A 0013_E q190000 q190000 000CQ01:3F:00:19 "LYNX CHEQUE: Device not ready, cheque
processing not possible"
645A 0014_E q200000 q200000 000CQ01:3F:00:20 "LYNX CHEQUE: Cheque Cassette 1 full, no
more cheques can be stored in Cassette 1"
645A 0015_E q210000 q210000 000CQ01:3F:00:21 "LYNX CHEQUE: Cheque Cassette 2 full, no
more cheques can be stored in Cassette 2"
645A 0016_E q220000 q220000 000CQ01:3F:00:22 "LYNX CHEQUE: All Cheque Cassettes full, no
more cheques can be stored"
645A 0017_E q230000 q230000 000CQ01:3F:00:23 "LYNX CHEQUE: Retract bin nearly full (high)"

Electronic Journal (Class: 0091)

Table 106: EMV transaction (Class: 0091)
Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
0091 DEFA_E 2810001 2810001 000PR02:3F:00:03 "E-JRN: E-Journal file could not be written"
0091 0001_E 2810001 2810001 000PR02:3F:00:03 "E-JRN: E-Journal file could not be written"
0091 0002_E 2810001 2810001 000PR02:3F:00:03 "E-JRN: E-Journal file could not be written"
0091 0003_E 2810001 2810001 000PR02:3F:00:03 "E-JRN: EJ/SAF-Journal file could not be written"

396 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables XFS 2.0 Error Classes

XFS 2.0 Error Classes

Cash Dispenser (Class: 00B9)

Table 107: XFS 2.0 Cash Dispenser (Class: 00B9)
Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
00B9 D010_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Firmware faulty, stopped"
00B9 D016_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Booter Firmware faulty, stopped"
00B9 D020_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: V.24 line problem master <==> slave"
00B9 D025_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Slave controller without Firmware"
00B9 D100_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Safe controller faulty"
00B9 D101_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Safe controller no booter or faulty"
00B9 D105_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Counter controller faulty"
00B9 D106_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Counter controller no booter or faulty"
00B9 D110_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Firmware not loaded"
00B9 D120_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Safety switch of safe module open"
00B9 D125_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Safety switch of counter module open"
00B9 D135_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Device lock after retract & quit"
00B9 D136_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Device lock after jam in counter area"
00B9 D140_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Hardware requirements not ok"
00B9 D145_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Hardware requirements not ok"
00B9 D146_E ?0332 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Requirements for BIM missing"
00B9 D170_E A72000000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Money jam during cash-in"
00B9 D171_E A72000000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Money jam during cash-in"
00B9 D175_E A72000000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Money jam during cash-in"
00B9 D176_E A72000000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Money jam during cash-in"
00B9 D178_E A72000000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Money jam during cash-in"
00B9 D179_E A72000000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Money jam during cash-in"
00B9 D180_E ?0332 80000000000000000 000DI01:3E:33:33 "WOSA CDM/CRS: Note jam in safe area cassettes"
00B9 D181_E ?0332 80000000000000000 000DI01:3E:33:33 "WOSA CDM/CRS: Note jam in safe area roller"
00B9 D182_E ?0332 80000000000000000 000DI01:3E:33:33 "WOSA CDM/CRS: Note jam in safe area cassettes"
00B9 D185_E ?0B75 80000000000000000 000DI01:3F:31p37 "WOSA CDM/CRS: Note jam in counter area (cash out
tray)"
00B9 D186_E ?0332 80000000000000000 000DI01:3E:33:33 "WOSA CDM/CRS: Note jam in counter area (cash out
tray)"
00B9 D187_E ?0332 80000000000000000 000DI01:3E:33:33 "WOSA CDM/CRS: Note jam in counter area (cash out
tray)"
00B9 D200_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Switch in safe area faulty/blocked"
00B9 D201_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Switch in safe area faulty/blocked"
00B9 D202_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Switch in safe area faulty/blocked"
00B9 D203_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Switch in safe area faulty/blocked"
00B9 D204_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Switch in safe area faulty/blocked"
00B9 D205_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Switch in counter area faulty/blocked"
00B9 D206_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Switch in counter area faulty/blocked"
00B9 D207_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Switch in counter area faulty/blocked"
00B9 D210_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Measurement station in safe area
faulty"
00B9 D214_E A400000 :4000 000DP01:3E:42:40 "WOSA CDM/CRS: Tape sensor in BIM module reports
error"
00B9 D215_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Measurement station in counter area
faulty"
00B9 D216_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: BIM reader line faulty"
00B9 D217_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: BIM communication faulty"
00B9 D218_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: BIM note signals missing/
inacceptable"
00B9 D219_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: BIM returns error in call response"
00B9 D220_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor intensifier faulty"
00B9 D230_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Switch in safe area faulty / blocked"
00B9 D231_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Switch in safe area faulty / blocked"
00B9 D232_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Switch in safe area faulty / blocked"

May 2011 397

XFS 2.0 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
00B9 D250_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Transport motor in safe area faulty"
00B9 D255_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Transport motor in safe area faulty"
00B9 D256_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Transport motor in safe area faulty"
00B9 D285_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Error during cash out tray handling"
00B9 D286_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Error during filling tray handling"
00B9 D287_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Error during cash out tray handling"
00B9 D295_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor of cash out tray covered"
00B9 D296_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor of filling tray covered"
00B9 D310_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Too many bundle reject cassette 1"
00B9 D320_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Too many bundle reject cassette 2"
00B9 D330_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Too many bundle reject cassette 3"
00B9 D340_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Too many bundle reject cassette 4"
00B9 D405_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9 D406_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9 D407_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Metal in input tray detected"
00B9 D408_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Security stripe sensor defect"
00B9 D410_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9 D411_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9 D420_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9 D421_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9 D430_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9 D431_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9 D440_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9 D441_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9 D451_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9 D461_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9 D510_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Too many bad bills cassette 1"
00B9 D520_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Too many bad bills cassette 2"
00B9 D530_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Too many bad bills cassette 3"
00B9 D540_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Too many bad bills cassette 4"
00B9 D605_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: ESCROW faulty (no signals)"
00B9 D610_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Cassette 1 faulty, write error"
00B9 D611_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Roller 1 or switch faulty"
00B9 D620_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Cassette 2 faulty, write error"
00B9 D621_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Roller 2 oder switch faulty"
00B9 D630_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Cassette 3 faulty, write error"
00B9 D631_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Roller 3 oder switch faulty"
00B9 D640_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Cassette 4 faulty, write error"
00B9 D641_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Roller 4 oder switch faulty"
00B9 D651_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Roller 5 oder switch faulty"
00B9 D661_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Roller 6 oder switch faulty"
00B9 D700_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty"
00B9 D705_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty"
00B9 D710_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photo or pressure sensor faulty"
00B9 D720_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photo or pressure sensor faulty"
00B9 D730_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photo or pressure sensor faulty"
00B9 D740_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photo or pressure sensor faulty"
00B9 D810_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty"
00B9 D820_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty"
00B9 D830_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty"
00B9 D840_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty"
00B9 D901_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9 D902_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9 D903_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9 D904_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9 D905_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9 D906_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9 D907_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9 D908_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9 D909_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9 D910_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9 D911_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"

398 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables XFS 2.0 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
00B9 D912_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D913_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D914_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D915_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D916_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D917_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D918_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D919_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D920_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D921_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D922_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D923_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D924_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9 D931_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor roller1 dirty"
00B9 D932_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor roller2 dirty"
00B9 D933_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor roller3 dirty"
00B9 D934_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor roller4 dirty"
00B9 D935_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor roller5 dirty"
00B9 D936_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Photosensor roller6 dirty"
00B9 D941_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Wrong position roller1 or 36V missing"
00B9 D942_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Wrong position roller2 or 36V missing"
00B9 D943_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Wrong position roller3 or 36V missing"
00B9 D944_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Wrong position roller4 or 36V missing"
00B9 D945_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Wrong position roller5 or 36V missing"
00B9 D946_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Wrong position roller6 or 36V missing"
00B9 DF01_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Metal or/and Stripe sensor defect"
00B9 DF03_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Metal or/and Stripe sensor defect"
00B9 FE71_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Wrong height of note in input tray"
00B9 FE9F_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Metal in CashIn tray detected"
00B9 FEA0_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Safe door must be closed during this
command"
00B9 FEA1_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: CashIn security failure"
00B9 FEA2_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Output position is not empty"
00B9 FEB9_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application or configuration error"
00B9 FEBA_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FEBB_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FEBC_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FEBD_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Money taken during retract"
00B9 FEBE_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Error in bills presentation"
00B9 FEBF_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Error in bills presentation"
00B9 FEC0_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Error in bills presentation"
00B9 FEC1_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Operator intervention required"
00B9 FEC2_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FEC3_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FEC4_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: No bills available"
00B9 FEC5_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9 FEC6_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Operator intervention required"
00B9 FEC7_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Operator intervention required"
00B9 FEC8_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Operator intervention required"
00B9 FEC9_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Operator intervention required"
00B9 FECA_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Operator intervention required"
00B9 FECB_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Position locked"
00B9 FECC_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FECD_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FECE_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FECF_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FED0_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9 FED1_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FED2_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Operator intervention required"
00B9 FED3_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FED4_E ?5354 80000000000000000 000DI01:3D:33:35 "WOSA CDM/CRS: Configuration error, check denomi-
nation"
00B9 FFCA_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"

May 2011 399

XFS 2.0 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
00B9 FFCB_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9 FFCC_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFCD_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Installation error"
00B9 FFCE_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFCF_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFD0_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFD1_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Installation error"
00B9 FFD2_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Installation error"
00B9 FFD3_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Installation error"
00B9 FFD4_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Installation error"
00B9 FFD5_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9 FFD6_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFD7_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFD8_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFD9_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFDA_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFDB_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFDC_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFDD_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFDE_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Installation error"
00B9 FFDF_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFE0_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFE1_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFE2_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFE3_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFE4_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFE5_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFE6_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFE7_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFE8_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFE9_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFEA_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFEB_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFEC_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFED_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFEE_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFEF_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFF0_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFF1_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFF2_E ?3002,?0B7 80000000000000008 000DI01:3F:00:01,0 "WOSA CDM/CRS: Hardware error, cannnot dispense or
5,@04,@00 ,8000000000000000 00DI01:3F:31p37,0 deliver"
8,904,900 00DR01:3A:41:40,0
00DR01:3A:37:41
00B9 FFF3_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFF4_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9 FFF5_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9 FFF6_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9 FFF7_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9 FFF8_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9 FFF9_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9 FFFA_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9 FFFB_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9 FFFC_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"
00B9 FFFD_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Installation error"
00B9 FFFE_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Installation error"
00B9 FFFF_E ?0912 80000000000000000 000DI01:38:00:00 "WOSA CDM/CRS: Application error"

400 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables XFS 2.0 Error Classes

Cash In (Class: 00B9_CIN)

Refer to section ”Error Class Mapping” on page 5.

Table 108: XFS 2.0 Cash In (Class: 00B9_CIN)

Error Error Diebold Diebold MDS i series Status desription
Class Code 912 code 911 code status code INFO
00B9_CIN D010_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Firmware faulty, stopped"
00B9_CIN D016_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Booter Firmware faulty, stopped"
00B9_CIN D020_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: V.24 line problem master <==> slave"
00B9_CIN D025_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Slave controller without Firmware"
00B9_CIN D100_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Safe controller faulty"
00B9_CIN D101_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Safe controller no booter or faulty"
00B9_CIN D105_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Counter controller faulty"
00B9_CIN D106_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Counter controller no booter or faulty"
00B9_CIN D110_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Firmware not loaded"
00B9_CIN D120_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Safety switch of safe module open"
00B9_CIN D125_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Safety switch of counter module open"
00B9_CIN D135_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Device lock after retract & quit"
00B9_CIN D136_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Device lock after jam in counter area"
00B9_CIN D140_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Hardware requirements not ok"
00B9_CIN D145_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Hardware requirements not ok"
00B9_CIN D146_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Requirements for BIM missing"
00B9_CIN D170_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Money jam during cash-in"
00B9_CIN D171_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Money jam during cash-in"
00B9_CIN D175_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Money jam during cash-in"
00B9_CIN D176_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Money jam during cash-in"
00B9_CIN D178_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Money jam during cash-in"
00B9_CIN D179_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Money jam during cash-in"
00B9_CIN D180_E A700000 :4000 000DP01:3E:33:33 "WOSA CDM/CRS: Note jam in safe area cassettes"
00B9_CIN D181_E A700000 :4000 000DP01:3E:33:33 "WOSA CDM/CRS: Note jam in safe area roller"
00B9_CIN D182_E A700000 :4000 000DP01:3E:33:33 "WOSA CDM/CRS: Note jam in safe area cassettes"
00B9_CIN D185_E A700000 :4000 000DP01:3F:31p37 "WOSA CDM/CRS: Note jam in counter area (cash out tray)"
00B9_CIN D186_E A700000 :4000 000DP01:3E:33:33 "WOSA CDM/CRS: Note jam in counter area (cash out tray)"
00B9_CIN D187_E A700000 :4000 000DP01:3E:33:33 "WOSA CDM/CRS: Note jam in counter area (cash out tray)"
00B9_CIN D200_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Switch in safe area faulty/blocked"
00B9_CIN D201_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Switch in safe area faulty/blocked"
00B9_CIN D202_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Switch in safe area faulty/blocked"
00B9_CIN D203_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Switch in safe area faulty/blocked"
00B9_CIN D204_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Switch in safe area faulty/blocked"
00B9_CIN D205_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Switch in counter area faulty/blocked"
00B9_CIN D206_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Switch in counter area faulty/blocked"
00B9_CIN D207_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Switch in counter area faulty/blocked"
00B9_CIN D210_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Measurement station in safe area faulty"
00B9_CIN D214_E A700000 :4000 000DP01:3E:42:40 "WOSA CDM/CRS: Tape sensor in BIM module reports error"
00B9_CIN D215_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Measurement station in counter area faulty"
00B9_CIN D216_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: BIM reader line faulty"
00B9_CIN D217_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: BIM communication faulty"
00B9_CIN D218_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: BIM note signals missing/inacceptable"
00B9_CIN D219_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: BIM returns error in call response"
00B9_CIN D220_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor intensifier faulty"
00B9_CIN D230_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Switch in safe area faulty / blocked"
00B9_CIN D231_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Switch in safe area faulty / blocked"
00B9_CIN D232_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Switch in safe area faulty / blocked"
00B9_CIN D250_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Transport motor in safe area faulty"
00B9_CIN D255_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Transport motor in safe area faulty"
00B9_CIN D256_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Transport motor in safe area faulty"

May 2011 401

XFS 2.0 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
00B9_CIN D285_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Error during cash out tray handling"
00B9_CIN D286_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Error during filling tray handling"
00B9_CIN D287_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Error during cash out tray handling"
00B9_CIN D295_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor of cash out tray covered"
00B9_CIN D296_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor of filling tray covered"
00B9_CIN D310_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Too many bundle reject cassette 1"
00B9_CIN D320_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Too many bundle reject cassette 2"
00B9_CIN D330_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Too many bundle reject cassette 3"
00B9_CIN D340_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Too many bundle reject cassette 4"
00B9_CIN D405_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9_CIN D406_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9_CIN D407_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Metal in input tray detected"
00B9_CIN D408_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Security stripe sensor defect"
00B9_CIN D410_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9_CIN D411_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9_CIN D420_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9_CIN D421_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9_CIN D430_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9_CIN D431_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9_CIN D440_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9_CIN D441_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9_CIN D451_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9_CIN D461_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: No separation possible"
00B9_CIN D510_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Too many bad bills cassette 1"
00B9_CIN D520_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Too many bad bills cassette 2"
00B9_CIN D530_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Too many bad bills cassette 3"
00B9_CIN D540_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Too many bad bills cassette 4"
00B9_CIN D605_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: ESCROW faulty (no signals)"
00B9_CIN D610_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Cassette 1 faulty, write error"
00B9_CIN D611_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Roller 1 or switch faulty"
00B9_CIN D620_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Cassette 2 faulty, write error"
00B9_CIN D621_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Roller 2 oder switch faulty"
00B9_CIN D630_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Cassette 3 faulty, write error"
00B9_CIN D631_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Roller 3 oder switch faulty"
00B9_CIN D640_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Cassette 4 faulty, write error"
00B9_CIN D641_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Roller 4 oder switch faulty"
00B9_CIN D651_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Roller 5 oder switch faulty"
00B9_CIN D661_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Roller 6 oder switch faulty"
00B9_CIN D700_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty"
00B9_CIN D705_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty"
00B9_CIN D710_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photo or pressure sensor faulty"
00B9_CIN D720_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photo or pressure sensor faulty"
00B9_CIN D730_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photo or pressure sensor faulty"
00B9_CIN D740_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photo or pressure sensor faulty"
00B9_CIN D810_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty"
00B9_CIN D820_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty"
00B9_CIN D830_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty"
00B9_CIN D840_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty"
00B9_CIN D901_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9_CIN D902_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9_CIN D903_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9_CIN D904_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9_CIN D905_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9_CIN D906_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9_CIN D907_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9_CIN D908_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9_CIN D909_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9_CIN D910_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (counter area)"
00B9_CIN D911_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D912_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D913_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D914_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"

402 May 2011 U25604-J-Z745-1-7600

MDS Status 912/911 Reference Tables XFS 2.0 Error Classes

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
00B9_CIN D915_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D916_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D917_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D918_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D919_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D920_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D921_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D922_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D923_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D924_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor is dirty (safe area)"
00B9_CIN D931_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor roller1 dirty"
00B9_CIN D932_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor roller2 dirty"
00B9_CIN D933_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor roller3 dirty"
00B9_CIN D934_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor roller4 dirty"
00B9_CIN D935_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor roller5 dirty"
00B9_CIN D936_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Photosensor roller6 dirty"
00B9_CIN D941_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Wrong position roller1 or 36V missing"
00B9_CIN D942_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Wrong position roller2 or 36V missing"
00B9_CIN D943_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Wrong position roller3 or 36V missing"
00B9_CIN D944_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Wrong position roller4 or 36V missing"
00B9_CIN D945_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Wrong position roller5 or 36V missing"
00B9_CIN D946_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Wrong position roller6 or 36V missing"
00B9_CIN DF01_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Metal or/and Stripe sensor defect"
00B9_CIN DF03_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Metal or/and Stripe sensor defect"
00B9_CIN FE71_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Wrong height of note in input tray"
00B9_CIN FE9F_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Metal in CashIn tray detected"
00B9_CIN FEA0_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Safe door must be closed during this
command"
00B9_CIN FEA1_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: CashIn security failure"
00B9_CIN FEA2_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Output position is not empty"
00B9_CIN FEB9_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application or configuration error"
00B9_CIN FEBA_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FEBB_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FEBC_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FEBD_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Money taken during retract"
00B9_CIN FEBE_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Error in bills presentation"
00B9_CIN FEBF_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Error in bills presentation"
00B9_CIN FEC0_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Error in bills presentation"
00B9_CIN FEC1_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Operator intervention required"
00B9_CIN FEC2_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FEC3_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FEC4_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: No bills available"
00B9_CIN FEC5_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9_CIN FEC6_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Operator intervention required"
00B9_CIN FEC7_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Operator intervention required"
00B9_CIN FEC8_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Operator intervention required"
00B9_CIN FEC9_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Operator intervention required"
00B9_CIN FECA_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Operator intervention required"
00B9_CIN FECB_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Position locked"
00B9_CIN FECC_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FECD_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FECE_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FECF_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FED0_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9_CIN FED1_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FED2_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Operator intervention required"
00B9_CIN FED3_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FED4_E A700000 :4000 000DP01:3D:33:35 "WOSA CDM/CRS: Configuration error, check denomination"
00B9_CIN FFCA_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFCB_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9_CIN FFCC_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFCD_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Installation error"
00B9_CIN FFCE_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"

May 2011 403

XFS 2.0 Error Classes MDS Status 912/911 Reference Tables

Error Error Diebold Diebold MDS i series Status desription

Class Code 912 code 911 code status code INFO
00B9_CIN FFCF_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFD0_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFD1_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Installation error"
00B9_CIN FFD2_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Installation error"
00B9_CIN FFD3_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Installation error"
00B9_CIN FFD4_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Installation error"
00B9_CIN FFD5_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9_CIN FFD6_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFD7_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFD8_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFD9_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFDA_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFDB_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFDC_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFDD_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFDE_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Installation error"
00B9_CIN FFDF_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFE0_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFE1_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFE2_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFE3_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFE4_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFE5_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFE6_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFE7_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFE8_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFE9_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFEA_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFEB_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFEC_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFED_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFEE_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFEF_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFF0_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFF1_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFF2_E ?3002,?0B7 801010000 000DP01:3F:00:01, "WOSA CDM/CRS: Hardware error, cannot dispense or deliver"
5,@04,@00 00000008, 000DP01:3F:31p37,
801010000 000DR01:3A:41:40,
00000008, 000DR01:3A:37:41
904,900
00B9_CIN FFF3_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFF4_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9_CIN FFF5_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9_CIN FFF6_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9_CIN FFF7_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9_CIN FFF8_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9_CIN FFF9_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9_CIN FFFA_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9_CIN FFFB_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Configuration error"
00B9_CIN FFFC_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"
00B9_CIN FFFD_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Installation error"
00B9_CIN FFFE_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Installation error"
00B9_CIN FFFF_E A700000 :4000 000DP01:38:00:00 "WOSA CDM/CRS: Application error"

404 May 2011 U25604-J-Z745-1-7600

Tables

Tables
Table 1: CSC-W32 and XFS class assign table . . . . . . . . . . . . 5

Table 2: XFS30 - CSC-W32 class assign table . . . . . . . . . . . . 6

Table 3: Cash Dispenser V1 (Class: 0007) . . . . . . . . . . . . . . 8

Table 4: Cash Dispenser NG (Classes: 0018/AA18/001D)) . . . . . . 12

Table 5: Cash In NG (Classes: 0018_CIN/AA18_CIN/001D_CIN)) . . 25

Table 6: Cash Cheque Deposit Module (CCDM) (Classes: 001A/XX1A) 33

Table 7: Cash Cheque Deposit Module (Class: 001A_CHQ) . . . . . 50

Table 8: Encryption Decryption Module (EDM) (Class: 000F) . . . . . 56

Table 9: Encryption Decryption Software (EDS) (Class: 0011) . . . . 57

Table 10: Card Reader (Class: 0008/AA08) . . . . . . . . . . . . . . 58

Table 11: Deposit Module (Class: 0017/AA17) . . . . . . . . . . . . . 62

Table 12: Vandal Guard (Class: 0015) . . . . . . . . . . . . . . . . . 66

Table 13: Motorized Door (Class: 000E) . . . . . . . . . . . . . . . . 67

Table 14: Coin Out module (Class: 0021) . . . . . . . . . . . . . . . 67

Table 15: Coin In module (Class: 0022) . . . . . . . . . . . . . . . . 68

Table 16: P6 (P36) (Class: 0027) . . . . . . . . . . . . . . . . . . . . 71

Table 17: Printer (Class: 0032) . . . . . . . . . . . . . . . . . . . . . 71

Table 18: Printer (Class: 0033) . . . . . . . . . . . . . . . . . . . . . 72

Table 19: Printer (Class: 0034) . . . . . . . . . . . . . . . . . . . . . 73

Table 20: Printer (Class: 0035) . . . . . . . . . . . . . . . . . . . . . 74

Table 21: Printer (Class: 0038) . . . . . . . . . . . . . . . . . . . . . 74

Table 22: Printer (Class: 0039) . . . . . . . . . . . . . . . . . . . . . 75

Table 23: SEAC Cheque Scanner (Class: 003D) . . . . . . . . . . . . 78

Table 24: Printer (Class: 003E) . . . . . . . . . . . . . . . . . . . . . 79

U25604-J-Z745-1-7600 May 2011 405

 Tables

Table 25: Printer (Class: 003F) . . . . . . . . . . . . . . . . . . . . 80

Table 26: Printer (Class: 0040) . . . . . . . . . . . . . . . . . . . . . 80

Table 27: Printer (Class: 0041) . . . . . . . . . . . . . . . . . . . . . 81

Table 28: Printer (Class: 0042) . . . . . . . . . . . . . . . . . . . . . 81

Table 29: Printer (Class: 0044) . . . . . . . . . . . . . . . . . . . . . 83

Table 30: Printer (Class: 0045) . . . . . . . . . . . . . . . . . . . . . 84

Table 31: Printer (Class: AA45) . . . . . . . . . . . . . . . . . . . . 85

Table 32: Printer (Class: 0048) . . . . . . . . . . . . . . . . . . . . . 88

Table 33: Printer (Class: AA48) . . . . . . . . . . . . . . . . . . . . 89

Table 34: Printer (Class: 004A) . . . . . . . . . . . . . . . . . . . . 92

Table 35: Printer (Class: 004B) . . . . . . . . . . . . . . . . . . . . 92

Table 36: Reiner Scanner (Class: 0051) . . . . . . . . . . . . . . . . 93

Table 37: Printer (Class: 0052) . . . . . . . . . . . . . . . . . . . . . 95

Table 38: Single Note Acceptor (SNA) (Class: 0059) . . . . . . . . . 96

Table 39: Euro Bank Note Handler (class: 005A) . . . . . . . . . . . 97

Table 40: EBH Cash In (class: 005A_CIN) . . . . . . . . . . . . . . . 128

Table 41: Euro Bank Note Handler (class: 005E) . . . . . . . . . . . 164

Table 42: EBH Cash In (class: 005E_CIN) . . . . . . . . . . . . . . . 165

Table 43: Forms Print errors (REC/DOC) (class: 6431) . . . . . . . . 167

Table 44: RM3 (Cineo series) errors (class: 65c0) . . . . . . . . . . . 168

Table 45: RM3 (Cineo series) errors (class: 65c0_CIN) . . . . . . . . 179

Table 46: Transaction (Class: 6434) . . . . . . . . . . . . . . . . . . 191

Table 47: Cash Dispenser (Class: 643A) . . . . . . . . . . . . . . . 193

Table 48: Security Module (Class: 643C) . . . . . . . . . . . . . . . 194

Table 49: CashIn transaction (Class: 6446) . . . . . . . . . . . . . . 194

Table 50: WEB Dialog wrapper (Class: 6447) . . . . . . . . . . . . . 195

406 May 2011 U25604-J-Z745-1-7600

Tables

Table 51: EMV transaction (Class: 6459) . . . . . . . . . . . . . . . . 195

Table 52: Cheque transaction (Class: 645A) . . . . . . . . . . . . . . 196

Table 53: EMV transaction (Class: 0091) . . . . . . . . . . . . . . . . 196

Table 54: XFS 2.0 Cash Dispenser (Class: 00B9) . . . . . . . . . . . 197

Table 55: XFS 2.0 Cash In (Class: 00B9_CIN) . . . . . . . . . . . . . 201

Table 56: Cash Dispenser V1 (Class: 0007) . . . . . . . . . . . . . . 207

Table 57: Cash Dispenser NG (Classes: 0018/AA18/001D) . . . . . . 211

Table 58: Cash In NG (Classes: 0018_CIN/AA18_CIN/001D_CIN) . . 226

Table 59: Cash Cheque Deposit Module (CCDM) (Classes: 001A/XX1A) 233

Table 60: Cash Cheque Deposit Module (Class: 001A_CHQ) . . . . . 251

Table 61: Encryption Decryption Module (EDM) (Class: 000F) . . . . . 257

Table 62: Encryption Decryption Software (EDS) (Class: 0011) . . . . 258

Table 63: Card Reader (Class: 0008/AA08) . . . . . . . . . . . . . . 259

Table 64: Deposit Module (Class: 0017) . . . . . . . . . . . . . . . . 264

Table 65: Vandal Guard (Class: 0015) . . . . . . . . . . . . . . . . . 268

Table 66: Motorized Door (Class: 000E) . . . . . . . . . . . . . . . . 269

Table 67: Coin Out module (Class: 0021) . . . . . . . . . . . . . . . 269

Table 68: Coin In module (Class: 0022) . . . . . . . . . . . . . . . . 270

Table 69: P6 (P36) (Class: 0027) . . . . . . . . . . . . . . . . . . . . 273

Table 70: Printer (Class: 0032) . . . . . . . . . . . . . . . . . . . . . 273

Table 71: Printer (Class: 0033) . . . . . . . . . . . . . . . . . . . . . 274

Table 72: Printer (Class: 0034) . . . . . . . . . . . . . . . . . . . . . 275

Table 73: Printer (Class: 0035) . . . . . . . . . . . . . . . . . . . . . 275

Table 74: Printer (Class: 0038) . . . . . . . . . . . . . . . . . . . . . 276

Table 75: Printer (Class: 0039) . . . . . . . . . . . . . . . . . . . . . 277

Table 76: SEAC Cheque Scanner (Class: 003D) . . . . . . . . . . . . 280

U25604-J-Z745-1-7600 May 2011 407

 Tables

Table 77: Printer (Class: 003E) . . . . . . . . . . . . . . . . . . . . 281

Table 78: Printer (Class: 003F) . . . . . . . . . . . . . . . . . . . . 282

Table 79: Printer (Class: 0040) . . . . . . . . . . . . . . . . . . . . . 282

Table 80: Printer (Class: 0041) . . . . . . . . . . . . . . . . . . . . . 283

Table 81: Printer (Class: 0042) . . . . . . . . . . . . . . . . . . . . . 283

Table 82: Printer (Class: 0044) . . . . . . . . . . . . . . . . . . . . . 284

Table 83: Printer (Class: 0045) . . . . . . . . . . . . . . . . . . . . . 285

Table 84: Printer (Class: AA45) . . . . . . . . . . . . . . . . . . . . 286

Table 85: Printer (Class: 0048) . . . . . . . . . . . . . . . . . . . . . 288

Table 86: Printer (Class: AA48) . . . . . . . . . . . . . . . . . . . . 289

Table 87: Printer (Class: 004A) . . . . . . . . . . . . . . . . . . . . 292

Table 88: Printer (Class: 004B) . . . . . . . . . . . . . . . . . . . . 292

Table 89: Reiner Scanner (Class: 0051) . . . . . . . . . . . . . . . . 294

Table 90: Printer (Class: 0052) . . . . . . . . . . . . . . . . . . . . . 296

Table 91: Single Note Acceptor (SNA) (class: 0059) . . . . . . . . . 297

Table 92: Euro Bank Note Handler (class: 005A) . . . . . . . . . . . 298

Table 93: EBH Cash In (class: 005A_CIN) . . . . . . . . . . . . . . 333

Table 94: Euro Bank Note Handler (class: 005E) . . . . . . . . . . . 361

Table 95: EBH Cash In (class: 005E_CIN) . . . . . . . . . . . . . . . 363

Table 96: Forms Print errors (class: 6431) . . . . . . . . . . . . . . . 365

Table 97: RM3 (Cineo series) errors (class: 65c0) . . . . . . . . . . . 366

Table 98: RM3 (Cineo series) errors (class: 65c0_CIN) . . . . . . . . 379

Table 99: Transaction (Class: 6434) . . . . . . . . . . . . . . . . . . 391

Table 100:Cash Dispenser (Class: 643A) . . . . . . . . . . . . . . . 393

Table 101:Security Module (Class: 643C) . . . . . . . . . . . . . . . 394

Table 102:CashIn transaction (Class: 6446) . . . . . . . . . . . . . . 394

408 May 2011 U25604-J-Z745-1-7600

Tables

Table 103:WEB Diaslog Wrapper (Class: 6447) . . . . . . . . . . . . 395

Table 104:EMV transaction (Class: 6459) . . . . . . . . . . . . . . . . 395

Table 105:Cheque transaction (Class: 645A) . . . . . . . . . . . . . . 396

Table 106:EMV transaction (Class: 0091) . . . . . . . . . . . . . . . . 396

Table 107:XFS 2.0 Cash Dispenser (Class: 00B9) . . . . . . . . . . . 397

Table 108:XFS 2.0 Cash In (Class: 00B9_CIN) . . . . . . . . . . . . . 401

U25604-J-Z745-1-7600 May 2011 409

 Tables

410 May 2011 U25604-J-Z745-1-7600