Scribd
Upload
54 views4 pages

Practice 1: Preparing The Practice Environment

This document provides instructions for preparing the practice environment for an Oracle database administration course. It involves: 1. Installing software like Oracle VirtualBox, WinSCP, and Putty on the host PC. 2. Creating two Oracle Linux virtual machines named srv1 and srv2 in VirtualBox with 4GB RAM each. 3. Configuring the /etc/hosts file on both virtual machines to see each other, and pinging each server. 4. Connecting to each virtual machine from the host PC using PuTTY and saving the connections, distinguishing srv2 with a green font. By following these steps, the user will have two Linux virtual machines srv1 and srv2

Uploaded by

Julio Abreu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
54 views4 pages

Practice 1: Preparing The Practice Environment

This document provides instructions for preparing the practice environment for an Oracle database administration course. It involves: 1. Installing software like Oracle VirtualBox, WinSCP, and Putty on the host PC. 2. Creating two Oracle Linux virtual machines named srv1 and srv2 in VirtualBox with 4GB RAM each. 3. Configuring the /etc/hosts file on both virtual machines to see each other, and pinging each server. 4. Connecting to each virtual machine from the host PC using PuTTY and saving the connections, distinguishing srv2 with a green font. By following these steps, the user will have two Linux virtual machines srv1 and srv2

Uploaded by

Julio Abreu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Preparing the Practice Environment Pa ge |1

Practice 1: Preparing the Practice Environment

Practice Overview
This practice guides you to prepare the environment that you will use in the course practices. The
practices in the course were designed using virtual machines. You will build two Linux-based virtual
machines. One of them will be the main machine that you will use in most of the course practices and the
other machine will be used only in a few practices.

Note: this practice assumes that you have the knowledge to perform the basic tasks on Oracle
VirtualBox.

Practice Environment Requirements


Following are the requirements to prepare the practice environment:

Item Type Description


PC machine hardware A PC with Windows 7, 8 or 10 64-bit installed on it to host the virtual
machines.
Following are the required specifications:
Memory: 16 GB
Storage free space: 100 GB
Oracle VirtualBox, software Software to create virtual machines (called virtual appliances)
release 5.1.x
WinSCP software A utility to copy the files to and from an Oracle VBox appliance
Putty software A program which provides a command line prompt to connect to a Linux
server from Windows

Practice Environment Architecture


Item Value
hostname of the first machine: srv1
hostname of machine: srv2
DHCP enabled? Yes
Memory on each machine: 4 GB
HDD on each machine: 70 GB

Oracle 12c Multitenant Architecture Administration, a course by Ahmed Baraka


Preparing the Practice Environment Pa ge |2

Practice Environment Preparation Procedure

A. Install the Software on the Hosting PC

1. Install all the software mentioned in the list above in your PC.

B. Create an Oracle Linux 64-bit VirtualBox appliance

In the following steps, you will create an Oracle VirtualBox appliance.

2. Create a Linux-based VirtualBox appliance with the specifications as shown in the table below.
This is an Oracle VirtualBox appliance which has a fresh installation of Oracle Linux 6.7 installed on
it.
If you have not created a VirtualBox appliance before, the procedure to create it from scratch is
documented here, or can be watched at YouTube here.
Item Value
Hostname srv1
Memory 4 GB
Operating system Linux 6.7

C. Create a second Oracle Linux 64-bit VirtualBox appliance

In the following steps, you will create an additional Oracle VirtualBox appliance.

3. Create another Linux-based VirtualBiox appliance with the specifications as shown in the table below.
Item Value
Hostname srv2
Memory 4 GB
Operating system Linux 6.7

Oracle 12c Multitenant Architecture Administration, a course by Ahmed Baraka


Preparing the Practice Environment Pa ge |3

D. Perform more configuration

In the following steps, you will perform more configuration to get your environment ready for the course.

4. In both appliances, configure the /etc/hosts file and make sure they can see each other.
vi /etc/hosts

127.0.0.1 localhost localhost.localdomain


192.168.1.159 srv1.localdomain srv1
192.168.1.160 srv2.localdomain srv2

ping srv1
ping srv2

5. Connect to each appliance from your hosting PC using PuTTY. Save the two connections in PuTTY.
Configure the session to the srv2 to have green font. The idea is to make it easy for you to
distinguish between the PuTTY session windows connected to the first server and those which are
connected to the second server.

The following screenshot shows you where to click to change the font color in PuTTY:

Oracle 12c Multitenant Architecture Administration, a course by Ahmed Baraka


Preparing the Practice Environment Pa ge |4

Summary

By end of this practice, you should have two Linux-based Oracle VirtualBox appliances: srv1 and
srv2.

srv1 will be used to install the Oracle 12c release 2 CDB database and srv2 will be used to install
an Oracle non-CDB database.

Oracle 12c Multitenant Architecture Administration, a course by Ahmed Baraka

You might also like