Scribd
Upload
2K views12 pages

ChuWi Hi10 Pro Dual System Flash Tutorial

1. The document provides steps to flash the BIOS, Android, and Windows systems on a ChuWi Hi10 Pro tablet. 2. It involves using a USB drive, OTG cable, hub, and keyboard to boot the tablet into flashing mode and flash each system sequentially: first the BIOS, then Android which will format the Windows partition, and lastly Windows alone which does not affect Android. 3. Special precautions are mentioned like ensuring over 50% battery charge during flashing and only flashing BIOS if reinstalling systems to avoid issues.

Uploaded by

Jason Smaster
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
2K views12 pages

ChuWi Hi10 Pro Dual System Flash Tutorial

1. The document provides steps to flash the BIOS, Android, and Windows systems on a ChuWi Hi10 Pro tablet. 2. It involves using a USB drive, OTG cable, hub, and keyboard to boot the tablet into flashing mode and flash each system sequentially: first the BIOS, then Android which will format the Windows partition, and lastly Windows alone which does not affect Android. 3. Special precautions are mentioned like ensuring over 50% battery charge during flashing and only flashing BIOS if reinstalling systems to avoid issues.

Uploaded by

Jason Smaster
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 12

ChuWi Hi10 Pro dual system flash tutorial

•tools： 8G USB disk，micro USB-OTG cable 、HUB（3 interfaces or more)、 USB


interface keyboard，as below:

Flash steps ：

1.First fl ash bios，then fl ash Android，last fl ash Windows.（if it’s cause by


the system issues,you can pass the fi rst step, no need to fl ash BIOS. ） 。

2.Flash Android will format the Windows memory,you can keep the
Windows or delete the Windows script,please backup the important data
before you delete Windows.

3.Flash the Windows,（fl ashing the Windows alone will not aff ect
Android）

Noti ce： Make sure the batt ery has more than 50% charge,or keep charging .

一、Flash BIOS（If it’s reinstall system, you can not fl ash bios ，fl ashing
the wrong bios may result in no display,Please be cauti ous. ）

1.copy the bios fi le to USB Root directory ，（format the USB to fat32, enti tled
WINPE）

2.Connect the tablet micro-USB to Hub ，USB disk and USB keyboard plug into
HUB.

Press the power butt on to turn on (under the Off state) ，at the same ti me, press
F7 conti nuously to enter the fl ashing mode.
3.Via the keyboard”↑“ ↓” to select UEFI: San Disk , Parti ti on 1press”Enter”to start
fl ash Bios，it will turn on automati cally.
二、Flash Android

1.First install the Android fl ashing tool on your home computer.


2.Start fl ash(click the upper right corner tool Browse... fi nd the downloaded
Android fi rmware fi le and select fl ash.json ,Confi gurati on:the second blank
without gpt,keep parti ti on ，if you have deleted please select the fi rst blank and
fl ash the windows again ）

3.Select the fi rmware, under the off state keep pressing the volume”+” ”-” at the
same ti me,then press the power butt on to turn on.

Aft er turn on the power butt on can be released, volume”+” ”-” not,unti l it
shows【DNX FASTBOOT MOOE..】connect the computer to fl ash.Aft er fl ashing it
will turn on and enter the Android language interface automati cally.

4.click Start to flash

三、Flash Windows
1.format the USB disk, as below:

【NTFS enti tled WINPE 】（it can’t be recognized if not enti tled WINP ）

2.open win10 image fi le and copy the subfi le to the root directory of the USB disk.
（start flashing after copy is complete）

3.Connect the tablet micro-USB to Hub ，USB disk and USB keyboard plug into
HUB.

Press the power butt on to turn on (under the Off state) ，at the same ti me, press
F7 conti nuously to enter the fl ashing mode.

4.Via the keyboard”↑“ ↓” to select UEFI: San Disk , Parti ti on 1press”Enter”to start
fl ash Win，it will turn off aft er fl ashing.
1.

2.

The first time turn on the tablet will take a long time,please wait patiently to enter the language
interface , then select the language to enter the system.

Last：The programming will last about 5 to 10 minutes; the precise time is


dependent of Hub and U disk. The introduction is on basis of using the U disk 3.0.
High-speed programming lasts about 5 minutes.

TIPS：

Flash machine is risky, please follow the flash tutorial.thank you!

You might also like