Scribd Logo
Upload

Welcome to Scribd!

  • 57 views

    NTE931 Integrated Circuit 3-Terminal Positive Voltage Regulator 5V, 3A

    Uploaded by

    Wilfredo Molina
    The NTE931 is a 3-terminal positive voltage regulator capable of supplying up to 3A to loads. It uses internal current and thermal limiting for protection without needing external components. The regulator has a typical output voltage of 5V with tight regulation even with varying input voltage and load levels. It can reliably operate under a wide range of temperatures and input voltages.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    NTE931 Integrated Circuit 3-Terminal Positive Voltage Regulator 5V, 3A

    Uploaded by

    Wilfredo Molina
    57 views2 pages
    The NTE931 is a 3-terminal positive voltage regulator capable of supplying up to 3A to loads. It uses internal current and thermal limiting for protection without needing external components. The regulator has a typical output voltage of 5V with tight regulation even with varying input voltage and load levels. It can reliably operate under a wide range of temperatures and input voltages.

    Original Description:

    Technical Specifications of electronic device NTE931

    Original Title

    nte931

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The NTE931 is a 3-terminal positive voltage regulator capable of supplying up to 3A to loads. It uses internal current and thermal limiting for protection without needing external components. The regulator has a typical output voltage of 5V with tight regulation even with varying input voltage and load levels. It can reliably operate under a wide range of temperatures and input voltages.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    57 views2 pages

    NTE931 Integrated Circuit 3-Terminal Positive Voltage Regulator 5V, 3A

    Uploaded by

    Wilfredo Molina
    The NTE931 is a 3-terminal positive voltage regulator capable of supplying up to 3A to loads. It uses internal current and thermal limiting for protection without needing external components. The regulator has a typical output voltage of 5V with tight regulation even with varying input voltage and load levels. It can reliably operate under a wide range of temperatures and input voltages.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    NTE931

    Integrated Circuit
    3–Terminal Positive Voltage Regulator
    5V, 3A
    Description:
    The NTE931 is a 3–terminal fixed positive voltage regulator in a TO3 type package capable of driving
    loads up to 3A. New circuit design and processing techniques are used to provide the high output
    current without sacrificing the regulation characteristics of lower current devices.
    This device is virtually blowout proof. Current limiting and thermal shutdown provide a high level of
    reliability. No external components are required for operation of the NTE931, however, if the device
    is more than 4 inches from the filter capacitor a 1µF solid tantalum capacitor should be used on the
    input. A 0.1µF or larger capacitor may be used on the output to reduce load transient spikes created
    by fast switching digital logic, or to swamp out stray load capacitance.
    An overall worst case specification for the combined effects of input voltage, load current, ambient
    temperature, and power dissipation ensures that the NTE931 will perform satisfactory as a system
    element.
    Features:
    D Output Current in Excess of 3A
    D Internal Current and Thermal Limiting
    D 0.01Ω Typical Output Impedance
    D 7.5 Minimum Input Voltage
    D 30W Power Dissipation
    D 100% Electrical Burn–In
    Absolute Maximum Ratings:
    Input Voltage, VIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20V
    Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Internally Limited
    Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0° to +125°C
    Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +150°C
    Typical Thermal Resistance, Junction–to–Case (Note 1), RthJC . . . . . . . . . . . . . . . . . . . . . . . . . 2°C/W
    Lead Temperature (Soldering, 10 sec), TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +300°C
    Burn–In In Thermal Limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100%
    Note 1. Without a heatsink, thermal resistance is about 35°C/W. With a heatsink, the effective thermal
    resistance can only approach the specified value of 2°C/W, depending on the effeciency of the
    heatsink.
    Electrical Characteristics: (TJ = 0° to +125°C, Note 2 unless otherwise specified)
    Parameter Symbol Test Conditions Min Typ Max Unit
    Output Voltage VO TJ = +25°C, VIN = 7.5V, IO = 0A 4.8 5.0 5.2 V
    VIN = 7.5V to 15V, IO = 0A to 3A, P ≤ 30W 4.75 5.00 5.25 V
    Line Regulation Regline TJ = +25°C, VIN = 7.5V to 15V, Note 3 – 5 25 mV
    Load Regulation Regload TJ = +25°C, VIN = 7.5V, IO = 0A to 3A, Note 3 – 25 100 mV
    Quiescent Current IB VIN = 7.5V to 15V, IO = 0A to 3A – 12 20 mA
    Output Noise Voltage Vn TJ = +25°C, f = 10Hz to 100kHz – 40 – µVrms
    Short Circuit Current Limit TJ = +25°C, VIN = 15V – 3.0 4.5 A
    TJ = +25°C, VIN = 7.5V – 4.0 5.0 A
    Long Term Stability – – 35 mW

    Note 2. Although power dissipation is internally limited, specifiecations apply only for P ≤ 30W.
    Note 3. Load and line regulation are specified at constant junction temperature. Pulse testing is
    required with a pulse width of ≤ 1ms and a duty cycle of ≤ 5%.

    Pin Connection Diagram

    .135 (3.45) Max


    .350 (8.89) .875 (22.2)
    Dia Max
    Seating
    Plane

    Output
    .312 (7.93) Min
    2 .040 (1.02)

    VOUT 1.187 (30.16)


    1
    .215 (5.45) .665
    Input (16.9)
    Case/GND .156 (3.96) Dia
    (2 Holes)
    .430
    (10.92)
    .188 (4.8) R Max

    .525 (13.35) R Max


    VIN GND/Case

    You might also like