1.

 Which of
these  Mark for Review 
elements (1) Points
cannot be
proactively
monitored
with the
SL150

Location and health properties of drives

CRU replacement indication
Location, module, generation, and SCSI address of cartridges
Status of server system (*)

Correct!

2.  The SL150 is being released as a replacement for which library(ies)?

 Mark for Review 
(1) Points

(Choose all correct answers)

SL700, SL500
SL500, SL24, SL48 (*)
SL24/48, SL700, SL500 (*)
SL500, SL3000

Sorry, that is not correct. Please review the course

content and try again.

3.  The SL150 library can be divided into a maximum of how many partitions with each
havingat least one tape drive and one magazine?  Mark for Review 
(1) Points

8 (*)
12
4
2

Correct!

4.  Which of these statement about encryption in the SL150 is correct?

 Mark for Review 
(1) Points

OKM encryption with the SL150 became available with the LTO6
The SL150 supports encryption with OKM 2.5 and 3 (*)
The SL150 supports encryption with OKM 3 only
The SL150 does not currently support encryption

Correct!
 5.  The base model of the SL-150 features how many USB ports?
 Mark for Review 
(1) Points

seven
eight
six
nine (*)

Correct!

6. Basic
library  Mark for Review 
initialization (1) Points
performed
from the
touch
screen of
the SL150
front
control
panel
involves
the
following
tasks:

(Choose all correct answers)

Configuring the library network interface (*)

Changing the default administrator password (*)
Creating a partition
Setting the date and time for the library (*)

Correct!

7.  The SL150 supports the following drives:

 Mark for Review 
(1) Points

LTO5 and LTO6 (*)

LTO4 and LTO5
T10KD
LTO4, LTO5 and LTO6

Correct!

8.  The SL150 remote browser graphical user interface can be used to configure the
following tasks:  Mark for Review 
(1) Points

Creating Additional User Accounts

 Partitioning and Configuring Tape Drives
Configuring Drive Cleaning Operations
Options 1 and 2 only
All of the above (*)

Correct!

9.  Which of the following StorageTek tape libraries are currently customer
installable?  Mark for Review 
(1) Points

SL150 only (*)

no StorageTek library is customer installable
SL150, SL3000
SL150, SL500, SL3000

Correct!

10.  You can add up to ____ 2U modules to expand cartridge capacity and increase the
number of available tape drives.  Mark for Review 
(1) Points

three
two
nine (*)
four

Correct!

11. To increase
customer ease  Mark for Review 
of use, all but (1) Points
which of the
following are
Customer
Replaceable
Units of the
SL150?

Backplane Card (*)

Power Supplies
Operator Panel
LTO Tape Drives
Robot Module

Correct!

12.  Which of the following are hot-swappable components for the

SL150?  Mark for
Review 
 (1) Points

LTO Drives and Operator Panel

Expansion Unit and Magazines
LTO Drives and Magazines
LTO Drives and Power Supplies (*)

Correct!

13.  The initial SL150 touch screen default password is:

 Mark for
Review 
(1) Points

changeme
password
passw0rd (*)
null

Correct!

14.  What features does the new library GUI in the Remote
Browser Interface include in the SL150?  Mark for
Review 
(1) Points

(Choose all correct answers)

Monitor library health (*)

Organize magazines
Manage settings (*)
Perform library operations (*)

Correct!

15.  Which of these statement about the SL150 robotics is true?

 Mark for
Review 
(1) Points

The SL150 uses the same z-frame assembly as the SL700

All of these statements are true
The SL150 features new robotics: similar design to the
SL500 but new materials (*)
The SL150 supports a dual robotic function
16.  Ports on
Fibre  Mark for Review 
Channel (1) Points
tape
drives
can
operate
as which
of the
followin
g?

F_ports
ISL_ports
FL_ports
N_ports or NL_ports (*)

Incorrect. Please refer to the “StorageTek StorageTek

Fibre Channel Fundamentals for Tape Drives” course
for more information.

17.  The SCSI Fibre Channel Protocol is also referred to as which of the following ?
 Mark for Review 
(1) Points

ATM
FCP (*)
IPPI
ESCON

Incorrect. Please refer to the “StorageTek StorageTek

Fibre Channel Fundamentals for Tape Drives” course
for more information.

18.  A fabric topology includes which of the following ?

 Mark for Review 
(1) Points

Ethernet cables
Only hubs
Point-to-point connections
Switches and / or directors (*)

Correct

19.  In a fabric topology, tape drives use how many bits for addressing ?
 Mark for Review 
(1) Points

24 (*)
8
36
16

Correct

20.  What is a possible source of light in a Fibre Channel network ?

 Mark for Review 
 (1) Points

Fluorescent light
Laser (*)
Electrical impulse
Glass fiber

Correct
A unique
World  Mark for
Wide Review 
Node (1) Points
Name
has how
many
bits ?

64 (*)
32
8
16
128

Correct

22.  A Fibre Channel arbitrated loop topology uses which device ?

 Mark for
Review 
(1) Points

A terminal
A hub (*)
A switch
A director

Incorrect. Please refer to the “StorageTek StorageTek Fibre

Channel Fundamentals for Tape Drives” course for more
information.

23.  How many layers are defined in the Fibre Channel architecture ?
 Mark for
Review 
(1) Points

1
16
4 (*)
8

Correct
 24.  Architectural layer FC-0 describes which of the following ?
 Mark for
Review 
(1) Points

The upper level mapping

The protocol
The hardware (*)
The flow control

Correct

25.  In a fabric topology, which device should you power up first ?

 Mark for
Review 
(1) Points

The switch (*)

The tape drive
The host
The disk

Incorrect. Please refer to the “StorageTek StorageTek Fibre

Channel Fundamentals for Tape Drives” course for more
information.

Which
Oracle  Mark for Review 
media (1) Points
type uses
a single
hub
design
with
media
wound
around a
take-up
reel and
positioned
in front of
the read-
write
head?

9840, 9940, T10000

All Oracle media uses this design
9940, LTO, T10000 (*)
9840, 9940, LTO

Correct
 27.  Which of the following should you first try when troubleshooting read errors?
 Mark for Review 
(1) Points

Transfer the data onto a new tape

Send the tape to Oracle to have it tested
Shut down the drive so that customer cannot use it
Read the tape in another drive (*)

Incorrect. Refer to Introduction to Oracle StorageTek

Tape Drive Technology for more information.

28.  What will be the indication when the drive is performing an Initial Program Load
(IPL) or initialization?  Mark for Review 
(1) Points

The LED will have a fast amber flash until the load is complete
The LED will flash red slowly for about two minutes (*)
The LED will flash green until the load is complete
The LED will have a solid red light until the load is complete

Correct

Ethernet Fundamentals
(Answer all questions in this section)

29.  What can be used to verify that the Ethernet network is functional ?
 Mark for Review 
(1) Points

VOP Drive Operations (*)

SCSI Fibre Toolbox Library Drive Test
Cartridge will load and unload
Library Operator Panel

Incorrect. Please refer to the “StorageTek StorageTek

Ethernet Fundamentals for T-Series Tape Drives” course
for more information.

30.  What type of physical connector is used for Ethernet cables ?

 Mark for Review 
(1) Points

RS-422
N_Port
D Style
RJ45 (*)
31. What
type of  Mark for Review 
traffic (1) Points
goes
across
the
Ethernet
interface
?

Library commands
Data
SCSI commands
TCP/IP Telnet and FTP commands (*)

Correct

32.  What is the primary purpose of the tape drive Ethernet interface ?
 Mark for Review 
(1) Points

To connect to an automated library

To interpret library commands
For monitoring and maintenance (*)
For data transfer

Correct

SCSI Fibre Toolbox

(Answer all questions in this section)

33.  Which test provides an option to show a graphical display?

 Mark for Review 
(1) Points

Quick QC
High Temp/Capacity
Write/Read/Positioning Stress/Data Integrity (*)
TapeScan

Correct

34.  What Web site contains a list of part numbers for the MAGMA box and host bus
adapter (HBA) circuit cards?  Mark for Review 
(1) Points

MPSS page
Oracle System Handbook (formerly Sun System Handbook) (*)
Primus database
 Customer Resource Center

Correct

35.  You have started the SCSI/Fibre ToolBox, but the GUI displays a disk target on the
internal SCSI bus of the personal computer. How would you display the tape drive  Mark for Review 
target? (1) Points

Select Test Unit Ready in the Commands submenu

Select Confirm Device in the Tests submenu
Use the View All Buses button (*)
Use the File menu

Incorrect. Please refer to the “Sun StorageTek SCSI/Fibre

Toolbox for Tape Drives” course for more information

36. What is
the  Mark for
maximu Review 
m (1) Points
number
of host
bus
adapter
(HBA)
cards you
can
install in
the
MAGMA
box
without a
special
mounting
bracket?

One
Zero
Three
Two (*)

Correct

Tape Automation Troubleshooting and Repair

(Answer all questions in this section)

37.  You have an SL150 that took a 9006 fault code. Based on the FSC code listing at
https://tapesupport.us.oracle.com/Products/FSC/Data/150_fault.php, what three  Mark for
actions could you take? Review 
(1) Points

Check power supply fan for obstruction, reseat drive, reseat motherboard
 Reinsert power supply, reseat controller, replace motherboard
Reseat power supply, reseat controller, replace motherboard
Check ambient temperature, check the power supply fan, replace power
supply (*)

Correct

38.  To find the latest firmware version of the LTO6 tape drive, which two tools would
you look in on the https://tapesupport.us.oracle.com/ site?  Mark for
Review 
(1) Points
(Choose all correct answers)

Reference/Firmware Version/OEM Code Version (*)

Tape Products/Tape Drives/LTO/Code Listing (*)

Reference/Firmware Versions/StorageTek Code Versions

Reference/FSCLookuptool/StorageTek Drives

Correct

39.  Is the Oracle Sytem Handbook accessible from this URL:

https://tapesupport.us.oracle.com/Products/Libraries/sl150.php?  Mark for
Review 
(1) Points

True (*)
False

Incorrect. Please refer to the Tape Automation

Troubleshooting and Repair course for more information.

40.  When interpreting a Fault Symptom Code for a customer, it is a good practice to
always share the Engineering text with them. True or False?  Mark for
Review 
(1) Points

True
False (*)

Correct

41. Using this Oracle System Handbook link -

https://mosemp.us.oracle.com/handbook_internal/Systems/SL150/co  Mark for
mponents.html, what is true about the part number 7057001? Review 
(1) Points

It is a CRU fr a 4GB
Long Wave SFP
Transceiver
It is a FRU for a HP
LTO6 SAS Half Height
Drive Tray
 It is an older part
number for a HP LTO5
FC Half Height Drive
Tray, 12V Fan
It is a CRU for a 3Gb
PCI-X SAS 8-Port Host
Adapter
It is a CRU for a HP
LTO6 SAS Half Height
Drive Tray (*)

Corre
ct

42.  Which version of the Oracle

System Handbook does not  Mark for
provide support related Review 
information? (1) Points

Internal
Public (*)
Support related
information is
available in all versions
Partner

Corre
ct

SL500 Service and Support

(Answer all questions in this section)

43.  During installation of the

Robotics Unit, make sure  Mark for
the shipping straps are Review 
removed; failure to remove (1) Points
them will result in what
kind of failure?

Drive Communication
Audit
Initialization (*)
Mount

Corre
ct

44.  How does the library start

an Initialization Sequence?  Mark for
Review 
(1) Points

Initialization occurs
when the library is
 powered-on or when
the front door is
opened and closed (*)
Initialization occurs
when the library is
directed by the user
using the backup
software interfacing
with the library
Initialization only
occurs when the front
door is opened and
closed
Initialization occurs
when the robot is fully
seated
Initialization requires a
technical support
Initialization Password
purchased by the
customer

Corre
ct

45.  Which of the following

components make up the  Mark for
Robotics Unit? Review 
(1) Points

X table, Z drive and

Hand assemblies (*)
X and Y drive
assemblies
X, Y and Z drive
assemblies
X and Y drive and
hand assemblies

Corre
ct

46. What is
the name  Mark for Review 
of the (1) Points
microcode
file that is
transferred
to the
SL500
during a
microcode
load?

vErd_SL500_ver.bin
code_version_verde.tgz
verde.tgz (*)
550_verde.bin
 Incorrect. Please refer to the SL500 Service and
Support ourse for more information.

47.  What is required to activate the library?

 Mark for Review 
(1) Points

A card key
The firmware installation
Nothing, it ships fully activated
A One-Time Activation Password (*)

Correct

48.  In a library with LTO Cartridge Slots, the base unit has up to how many cartridge
slots, assuming the upgrade conversion bill has been installed, one or two tape  Mark for Review 
drives, and a 5-slot cartridge access port (CAP). (1) Points

50 (*)
42
40
30

Correct

49.  What type of information is stored on the RLC Card?

 Mark for Review 
(1) Points

Llibrary capacity information and VOLIDs (*)

VOLANS and security passwords
All security information
Capacity information, VOLIDs and VOLANS

Correct