Unit 1: Careful Investigation or Inquiry Specially Through Search For New Facts in Any Branch of Knowledge."
Unit 1: Careful Investigation or Inquiry Specially Through Search For New Facts in Any Branch of Knowledge."
Unit 1: Careful Investigation or Inquiry Specially Through Search For New Facts in Any Branch of Knowledge."
MEANING OF RESEARCH
Research in common phrase refers to a search for knowledge.
The Advanced Learner’s Dictionary of Current English lays down the meaning of research as “a
careful investigation or inquiry specially through search for new facts in any branch of
knowledge.”
We can also define research as a scientific and systematic search for relevant information on a
specific topic.
In short, the search for knowledge through objective and systematic method of finding solution to
a problem is research.
OBJECTIVES OF RESEARCH
The purpose of research is to discover answers to questions through the application of scientific
procedures. The main aim of research is to find out the truth which is hidden and which has not
been discovered as yet. Research objectives fall into a number of following broad groupings:
1. To gain familiarity with a phenomenon or to achieve new insights into it (studies with this
object in view are termed as exploratory or formulative research studies).
2. To portray (describe) accurately the characteristics of a particular individual, situation or a
group (studies with this object in view are known as descriptive research studies).
3. To determine the frequency with which something occurs or with which it is associated
with something else (studies with this object in view are known as diagnostic research
studies).
4. To test a hypothesis of a causal relationship between variables (such studies are known as
hypothesis-testing research studies).
TYPES OF RESEARCH
The basic types of research are as follows:
1. Descriptive vs. Analytical: Descriptive research includes surveys and fact-finding
enquiries of different kinds. The major purpose of descriptive research is description of the
state of affairs as it exists at present. The main characteristic of this method is that the
researcher has no control over the variables; he can only report what has happened or what
is happening. The methods of research utilized in descriptive research are survey methods
of all kinds, including comparative and correlational methods. In analytical research, on
the other hand, the researcher has to use facts or information already available, and
analyze these to make a critical evaluation of the material.
2. Applied vs. Fundamental: Research can either be applied (or action) research or
fundamental (to basic or pure) research. Applied research aims at finding a solution for an
immediate problem facing a society or an industrial/business organization, whereas
fundamental research is mainly concerned with generalizations and with the formulation
of a theory. Research concerning some natural phenomenon or relating to pure
mathematics are examples of fundamental research. but research aimed at certain
conclusions (say, a solution) facing a concrete social or business problem is an example of
applied research. Thus, the central aim of applied research is to discover a solution for
some pressing practical problem, whereas basic (fundamental) research is directed
towards finding information that has a broad base of applications and thus, adds to the
already existing organized body of scientific knowledge.
3. Quantitative vs. Qualitative: Quantitative research is based on the measurement of
quantity or amount. It is applicable to phenomena that can be expressed in terms of
quantity. Qualitative research, on the other hand, is concerned with qualitative
phenomenon, i.e., phenomena relating to or involving quality or kind.
Qualitative research is specially important in the behavioral sciences where the aim is to
discover the underlying motives of human behavior. i.e., research designed to find out how
people feel or what they think about a particular subject or institution is qualitative
research
4. Conceptual vs. Empirical: Conceptual research is that related to some abstract idea(s) or
theory. It is generally used by philosophers and thinkers to develop new concepts or to
reinterpret existing ones. On the other hand, empirical research relies on experience or
observation alone, often without due regard for system and theory.
5. Some Other Types of Research: All other types of research are variations of one or more
of the above stated approaches, based on either the purpose of research, or the time
required to accomplish research, on the environment in which research is done, or on the
basis of some other similar factor.
a) One-time research (single time-period) or longitudinal research (several time-
periods).
b) Laboratory research or simulation research.
c) clinical or diagnostic research: Such research follows case-study methods or in-
depth approaches to reach the basic causal relations.
d) conclusion-oriented and decision-oriented: While doing conclusion-oriented
research, a researcher is free to pick up a problem, redesign the enquiry as he
proceeds and is prepared to conceptualize as he wishes. Decision- research is
always for the need of a decision maker and the researcher in this case is free to
embark upon research according to his own inclination.
Research Approaches
There are two basic approaches to research,
1. Quantitative approach: This approach can be further sub-classified into
a. Inferential: The purpose of inferential approach to research is to form a data base
from which to infer characteristics or relationships of population. This usually
means survey research where a sample of population is studied (questioned or
observed) to determine its characteristics, and it is then inferred that the population
has the same characteristics.
b. Experimental: Experimental approach is characterized by much greater control
over the research environment and in this case some variables are manipulated to
observe their effect on other variables.
c. Simulation: Simulation approach involves the construction of an artificial
environment within which relevant information and data can be generated.
2. Qualitative approach: Qualitative approach to research is concerned with subjective
assessment of attitudes, opinions and behavior. Such an approach to research generates
results either in non-quantitative form or in the form which are not subjected to rigorous
quantitative analysis. Generally, the techniques of focus group interviews, projective
techniques and depth interviews are used.
Research Process
Research process consists of series of steps necessary to effectively carry out research and the
desired sequencing of these steps.
However, the following order concerning various steps provides a useful procedural guideline
regarding the research process:
1. Formulating the research problem: There are two types of research problems, viz.,
those which relate to states of nature and those which relate to relationships between
variables.
Essentially two steps are involved in formulating the research problem, viz.,
understanding the problem thoroughly, and rephrasing the same into meaningful terms
from an analytical point of view. The best way of understanding the problem is to discuss
it with one’s own colleagues or with those having some expertise in the matter.
2. Extensive literature survey: At this step the researcher should undertake extensive
literature survey connected with the problem. For this purpose, the abstracting and
indexing journals and published or unpublished bibliographies are the first place to go to.
Academic journals, conference proceedings, government reports, books etc., must be
tapped depending on the nature of the problem.
3. Development of working hypotheses: After extensive literature survey, researcher
should state in clear terms the working hypothesis or hypotheses. Working hypothesis is
tentative assumption made in order to draw out and test its logical or empirical
consequences. Hypothesis should be very specific and limited to the piece of research in
hand because it has to be tested. The role of the hypothesis is to guide the researcher by
delimiting the area of research and to keep him on the right track.
How does one go about developing working hypotheses? The answer is by using the
following approach:
i. Discussions with colleagues and experts about the problem.
ii. Examination of data and records.
iii. Review of similar studies in the area or of the studies on similar problems.
iv. Exploratory personal investigation which involves original field interviews on a
limited scale with interested parties and individuals with a view to secure greater
insight into the practical aspects of the problem.
4. Preparing the research design: There are several research designs, such as, experimental
and non-experimental hypothesis testing. The preparation of the research design,
appropriate for a particular research problem, involves usually the consideration of the
following:
1. the means of obtaining the information;
2. the availability and skills of the researcher and his staff (if any);
3. explanation of the way in which selected means of obtaining information will be
organized and the reasoning leading to the selection;
4. the time available for research; and
5. the cost factor relating to research, i.e., the finance available for the purpose.
5. Determining sample design: The researcher must decide the way of selecting a sample or
what is popularly known as the sample design. In other words, a sample design is a
definite plan determined before any data are actually collected for obtaining a sample from
a given population. Thus, the plan to select 12 of a city’s 200 drugstores in a certain way
constitutes a sample design. Samples can be either probability samples or non-probability
samples. With probability samples each element has a known probability of being
included in the sample but the non-probability samples do not allow the researcher to
determine this probability. Probability samples are those based on simple random
sampling, systematic sampling, stratified sampling, cluster/area sampling whereas non-
probability samples are those based on convenience sampling, judgement sampling and
quota sampling techniques. A brief mention of the important sample designs is as follows:
1. Deliberate sampling: Deliberate sampling is also known as purposive or non-
probability sampling. This sampling method involves purposive or deliberate
selection of particular units of the universe for constituting a sample which
represents the universe.
2. Simple random sampling: This type of sampling is also known as chance
sampling or probability sampling where each and every item in the population has
an equal chance of inclusion in the sample and each one of the possible samples, in
case of finite universe, has the same probability of being selected. For example, if
we have to select a sample of 300 items from a universe of 15,000 items, then we
can put the names or numbers of all the 15,000 items on slips of paper and conduct
a lottery.
3. Systematic sampling: In some instances, the most practical way of sampling is to
select every 15th name on a list, every 10th house on one side of a street and so on.
Sampling of this type is known as systematic sampling.
4. Stratified (arranged in layers) sampling: If the population from which a sample
is to be drawn does not constitute a homogeneous group, then stratified sampling
technique is applied so as to obtain a representative sample. In this technique, the
population is stratified into a number of nonoverlapping subpopulations or strata
(layer) and sample items are selected from each stratum. If the items selected from
each stratum (layer) is based on simple random sampling the entire procedure, first
stratification and then simple random sampling, is known as stratified random
sampling.
5. Quota sampling: In stratified sampling the cost of taking random samples from
individual strata is often so expensive that interviewers are simply given quota to
be filled from different strata, the actual selection of items for sample being left to
the interviewer’s judgement. This is called quota sampling. Quota sampling is thus
an important form of non-probability sampling. Quota samples generally happen to
be judgement samples rather than random samples.
6. Cluster sampling and area sampling: Cluster sampling involves grouping the
population and then selecting the groups or the clusters rather than individual
elements for inclusion in the sample. Suppose some departmental store wishes to
sample its credit card holders. It has issued its cards to 15,000 customers. The
sample size is to be kept say 450. For cluster sampling this list of 15,000 card
holders could be formed into 100 clusters of 150 card holders each. Three clusters
might then be selected for the sample randomly.
7. Multi-stage sampling: This is a further development of the idea of cluster
sampling. This technique is meant for big inquiries extending to a considerably
large geographical area like an entire country. Under multi-stage sampling the first
stage may be to select large primary sampling units such as states, then districts,
then towns and finally certain families within towns. If the technique of random-
sampling is applied at all stages, the sampling procedure is described as multi-stage
random sampling.
8. Sequential sampling: This is somewhat a complex sample design where the
ultimate size of the sample is not fixed in advance but is determined according to
mathematical decisions on the basis of information yielded as survey progresses.
This design is usually adopted under acceptance sampling plan in the context of
statistical quality control.
6. Collecting the data: There are several ways of collecting the appropriate data which
differ considerably in context of money costs, time and other resources at the disposal of
the researcher. Primary data can be collected either through experiment or through survey.
If the researcher conducts an experiment, he observes some quantitative measurements, or
the data, with the help of which he examines the truth contained in his hypothesis. But in
the case of a survey, data can be collected by any one or more of the following ways:
1. By observation: This method implies the collection of information by way of
investigator’s own observation, without interviewing the respondents.
2. Through personal interview: The investigator follows a rigid procedure and seeks
answers to a set of pre-conceived questions through personal interviews.
3. Through telephone interviews: This method of collecting information involves
contacting the respondents on telephone itself.
4. By mailing of questionnaires: The researcher and the respondents do come in
contact with each other if this method of survey is adopted. Questionnaires are
mailed to the respondents with a request to return after completing the same.
5. Through schedules: Under this method the enumerators are appointed and given
training. They are provided with schedules containing relevant questions. These
enumerators go to respondents with these schedules. Data are collected by filling
up the schedules by enumerators on the basis of replies given by respondents.
7. Execution of the project: Execution of the project is a very important step in the research
process. If the execution of the project proceeds on correct lines, the data to be collected
would be adequate and dependable. The researcher should see that the project is executed
in a systematic manner and in time.
8. Analysis of data: After the data have been collected, the researcher turns to the task of
analyzing them. The analysis of data requires a number of closely related operations such
as establishment of categories, the application of these categories to raw data through
coding, tabulation and then drawing statistical inferences. Coding operation is usually
done at this stage through which the categories of data are transformed into symbols that
may be tabulated and counted. Editing is the procedure that improves the quality of the
data for coding. With coding the stage is ready for tabulation. Tabulation is a part of the
technical procedure wherein the classified data are put in the form of tables. In brief, the
researcher can analyze the collected data with the help of various statistical measures.
9. Hypothesis-testing: After analyzing the data as stated above, the researcher is in a
position to test the hypotheses, if any, he had formulated earlier. Various tests, such as Chi
square test, t-test, F-test, have been developed by statisticians for the purpose. The
hypotheses may be tested through the use of one or more of such tests, depending upon the
nature and object of research inquiry. Hypothesis-testing will result in either accepting the
hypothesis or in rejecting it.
10. Generalizations and interpretation: If a hypothesis is tested and upheld several times, it
may be possible for the researcher to arrive at generalization, i.e., to build a theory. As a
matter of fact, the real value of research lies in its ability to arrive at certain
generalizations. If the researcher had no hypothesis to start with, he might seek to explain
his findings on the basis of some theory. It is known as interpretation.
11. Preparation of the report or the thesis: Finally, the researcher has to prepare the report
of what has been done by him. Writing of report must be done with great care keeping in
view the following:
1. The layout of the report should be as follows:
i. The preliminary pages: In its preliminary pages the report should carry title
and date followed by acknowledgements and foreword. Then there should be a
table of contents followed by a list of tables and list of graphs and charts, if
any, given in the report.
ii. The main text: The main text of the report should have the following parts:
a) Introduction: It should contain a clear statement of the objective of the
research and an explanation of the methodology adopted in accomplishing
the research. The scope of the study along with various limitations should as
well be stated in this part.
b) Summary of findings: After introduction there would appear a statement of
findings and recommendations in non-technical language. If the findings are
extensive, they should be summarized.
c) Main report: The main body of the report should be presented in logical
sequence and broken-down into readily identifiable sections.
d) Conclusion: Towards the end of the main text, researcher should again put
down the results of his research clearly and precisely. In fact, it is the final
summing up.
iii. The end matter: At the end of the report, appendices should be enlisted in
respect of all technical data. Bibliography, i.e., list of books, journals, reports,
etc., Index should also be given specially in a published research report.
2. Report should be written in a concise and objective style in simple language
avoiding vague expressions such as ‘it seems,’ ‘there may be’, and the like.
3. Charts and illustrations in the main report should be used only if they present the
information more clearly and forcibly.
4. Calculated ‘confidence limits’ must be mentioned and the various constraints
experienced in conducting research operations may as well be stated.